Factory Five '33 Hot Rod Brochure by David Lindsey

FACTORY FIVE ‘33 HOT ROD

Two Factory Five customer teams built two ‘33 Hot Rods in 48 hours on Speed Chanel’s show “Car Warriors”. East coast member Justin Z. with Jimmy Shine. The winning car was donated to charity.

Customer Nick Sfetku earned “Best in Show” Hot Rod with his Factory Five ‘33 at the 2010 Association of Hand-built Automobiles show in Pomona, CA. At the same show, Factory Five Racing won AHA’s Good Manufacturer’s Award.

Factory Five customer Kevin S. put his ‘33 through the paces at the grueling Hot Rod Magazine Drag Week 2011.

Factory Five customer Rob I. from Ontario, Canada with his supercharged 4.6L “Terminator” ‘33 roadster.

Factory Five customer Alexey Eskindarov (from Moscow!) built his bright blue 5.0L Coyote powered street rod, and after the first ride, his wife promptly named the car “Angry Smurf”.

Factory Five customer Gary G. received his kit on July 16th, 2012 and completed it in less than 90 days! Gary says he’s not a mechanic or in the business. “I’m just a dude with some tools and greasy fingers.” - Gary G.

‘33 Hot Rod How We Came to Build a Hot Rod Ten years ago I swore we would never build a Hot Rod. The ones I had seen were beautiful machines whose handling and performance were a big disappointment. Our focus at Factory Five has always been to use modern engineering to build cars that perform as good as they look. The idea of building a traditional replica of a 1930s Ford was an inherent conflict. The original frame, chassis, and suspension designs that make up the bulk of what is sold today are not really capable of delivering sports car performance and ride quality. In the October 2004 issue of Hot Rod Magazine, then editor David Freiburger asked illustrator Thom Taylor to pen the lines for what he envisioned as the future of hot rodding in the form of a “race rod”. He dreamed of a “glass body on a full-tube chassis with a gen 3 aluminum V-8 at 2,400 lbs...imagine the violence,” he would later write. When Jim Schenck, our director of R&D, came to me with his ideas for a next generation Hot Rod I was immediately impressed. The idea of making a high performance and comfortable daily driver '33 was exciting and that race rod sketch immediately came to mind. Jim’s ideas weren't limited to just designing a performance Hot Rod. His excellent understanding of the Hot Rod market enabled him to see where there were opportunities for a “leap-frog” product. Today, most Hot Rods are looks first and everything else a distant second. In addition to performance that leaves something to be desired, most guys are forced to cobble together parts from a wide variety of companies and sources. Jim pitched me on the idea of using the Factory Five product template on the Hot Rod. The idea was to stay as traditional as possible, but make performance and drivability the focus AND package all the parts together to reduce the number of places a guy has to go. It made a lot of sense. We introduced the Factory Five ‘33 at the November 2008 SEMA Show where it earned “Best in Show - Hot Rod” and “Best Engineered Product - Runner-Up”. In 2012, the car won the GoodGuys National Autocross title in both Pro and Street classes. In its short life, the car has earned a slew of awards and industry recognition. The car has changed the way people think about the “stereo-typical” version of a Hot Rod. We did the same thing with our revolutionary AC replica more than 15 years ago....here we go again.

Dave Smith President

HOT ROD PREDICTION “With musclecars taking off so big right now, it will be a while before 48and-olders are the fresh buzz. But when that happens, it will be with a new crowd and a new look. Our race-rod concept probably ain’t it, but the street rod genre must evolve or die.” David Freiburger Editor

‘33 Hot Rod Design Hot Rod Evolution. By Jim Schenck The most important thing to understand is that from the very beginning of this project, I didn’t want to compromise what we, Factory Five, do with cars in building this Hot Rod. What I mean is that when you design a car like this, it LOOKS fast… but it's a big disappointment if it’s not. I really wanted to build a sports car that's about performance and driving fun as much as it is about looks. Truthfully that’s where the original Hot Rods started out. Guys who wanted to make their cars faster than the other guys. In that sense I think what we have done with this design is faithful to the original cars and Hot Rodding culture. Apart from the driving focus, we gave a lot of consideration to customization. Not only should a Hot Rod be fast but it should be a platform from which guys can build their cars in a variety of ways to make their own expression, and even change it once it has been built. The removable hard top/slide-in-windshield, removable side engine covers, and removable fenders, among other things, were designed with customization in mind. I'm proud of this car. As the design chief, I feel that the car benefits from our company’s talents in engineering and performance, while at the same time continues the legacy of American Hot Rods in a new and exciting way. Jim Schenck Director of R&D

Jim Schenck, Director of R&D (standing) works with Jesper Ingerslev, Director of Engineering on the hot rod exhaust system using solidworks CAD software on an HP workstation.

Hot Rod Magazine’s David Freiburger’s prediction came true in 2012 when the Factory Five ‘33 built by the crew at Ridetech Shocks won GoodGuys National autocross championship in pro AND street classes.

‘33 Hot Rod Manufacturing The Most American of Cars Made in America The new Factory Five ‘33 Hot Rod may have been born on on the computer, but it is made by American labor right here in the USA. While our talented staff of mechanical engineers uses advanced computer CAD designs up front, our manufacturing team finishes the job by using the right materials, tools and training to build a better part. Not only does Factory Five lead the component car industry in engineering, we set the bar just as high in manufacturing.

Precision laser-cut aluminum chassis panels are hand formed and fit to each frame. Composite bodies are mounted by hand in the chassis assembly dept.

In 2009, we were awarded the Good Manufacturing Practices Award from the Association of Hand-built Automobiles.

Our RPT Technologies welding robot adds consistency and accuracy to our component welding group.

Hot Rod Magazine Five-Day Hot Rod Build The Factory Five ‘33 Hot Rod was featured in a three-part build series in Hot Rod Magazine where the car was built in five days by a group of customers and magazine staff. Shortly after building the car, editor Rob Kinnan took the car on the Hot Rod Power Tour and competed with it in the GoodGuys Nationals Autocross in Columbus, OH. You can read the complete article series on our website. Here’s what they said: "Looks like a Hot Rod, but handles like an Indy Car” "No lying, it took only five days on this one AND the best part is, you can have fun with a group of buddies while doing it. Next month, we put the finished car to the test, but we'll tease you a little here - it's really fast." "Pro-touring can kiss our butt. The Race Rod is all business with the orange cones." "...the car burned up the short autocross course with a time of 31.36 seconds... quicker than all the Street Machine of the Year contenders.”

Rob Kinnan Assoc. Editor

‘33 Hot Rod Frame

Our welded parts are made in the USA with American labor.

A ‘33 Chassis Like No Other Under our classic ‘33 body is a frame like no other. Once we accepted that we could not make an original style frame strong enough to meet the demands of a performance sports car, we made the decision to design an all-new, completely modern, extremely rigid, and yet aesthetically pleasing, tubular steel space-frame. The ultra-rigid frame is made of mig-welded, high strength carbon steel tubing and plate steel. This unique design delivers great torsional rigidity, increased cockpit space, and numerous safety features.

Single full-width removable roll bar can be used with roadster or hardtop. Made from 11/2“ OD, .120” wall DOM tubing.

Safety designed collapsible steering column and bolt-on mounts for Wilwood pedal box.

Each frame is finish welded by hand, but supported by CAD designed tooling, high quality materials, and CNC robotics. The CAD/CAM based jigs are built with laser-cut tooling steel and hold parts to a high level of accuracy. What this means to you is that all of your running gear and accessories will bolt right into place like they should.

High performance cantilever style in-board KONI™ mono-tube coil-over shocks and tubular front suspension control arms are standard.

CAD designed tubular steel frame with backbone delivers tremendous torsional rigidity AND a low vehicle weight. The welded assembly weighs only 275 lbs. total!

The vehicle/chassis is 3” wider than the original car. This makes more space in the cockpit. The rearward and low engine placement delivers low center of gravity and optimum front/rear weight distribution.

The Factory Five ‘33 frame is computer designed on Solidworks™ software ®

using Hewlett Packard workstations.

Hood, doors, and trunk all mount directly to the steel frame, not the body shell. Doors are authentic rearhinged “suicide door” design.

Bolt-on engine mounts and adjustable transmission mounts for T-5, TKO, T56, AOD and other transmissions standard.

Side impact protection, DOT door latches, tubular steel door frames, and welded driveshaft safety hoops are some of the safety features built into the ‘33 frame.

Elegant truss-style round tube design is visable when the car is used without engine side covers.

‘33 Hot Rod Running Gear Bolt-in Your Engine, Transmission, and Rear End The Factory Five '33 Hot Rod is designed to use small block V-8 power, a wide range of transmissions, and a solid axle Ford rear end. Included in the Hot Rod package are the engine mounts, driveshaft, side exit exhaust, mufflers, and straight tubes with fasteners required to match up to the factory or aftermarket shorty headers. All these parts make installing your running gear easy.

Engine The '33 Hot Rod is set up to use either Ford or Chevy engines. Choose from small block Ford 289/302, 351, 4.6L 4V engines. and the new 5.0L Coyote or the Chevy small block and GM LS series of engines.

The strong Factory Five '33 frame is complimented by a modern race proven suspension and massive brakes. Roll bar is removable and also fits under the removable hard top.

Transmission Transmissions that can be used include the T-5 (Ford or GM), T56 (Ford or GM), 3550/TKO, 3650, TH350, C4, C6, AOD, 2004R, 700R4, 4L60E, and the TH400. When you order your Hot Rod, you will select the correct spline driveshaft for your transmission. You can also choose an automatic or manual transmission tunnel (manual transmission tunnel is narrower).

Rear End The car is designed to use a bolt-on Ford 8.8” solid-axle rear-end. You may also install a Ford 9” rear end if it has the 8.8” Mustang suspension mounts added.

Factory Five 3-link rear suspension show.

‘33 Hot Rod Suspension & Brakes Making a Hot Rod Drive like a Supercar The goal of making a modern Hot Rod handle like a well-balanced sports car required more than a well-designed and rigid frame. On the shoulders of our revolutionary '33 frame, we placed a state-of-the-art suspension, precise steering, competent brakes, and engineered the vehicle to have a lower center of gravity and excellent front/rear weight distribution. Our engineering team developed an all-new front suspension design and joined it with the proven rear suspension from our Challenge Series race cars. This new suspension configuration successfully delivers a combination of comfortable ride and superior performance. The tublar control arms are exposed outside of the body while the KONI™ brand cantilever shocks ride inboard and deliver excellent damping. The Factory Five '33 won the 2012 GoodGuys National Autocross Championship.

Front Suspension The front suspension is an in-board coil-over design with elegant, yet strong, unequal length upper and lower tubular a-arms and high-end mono-tube adjustable coil-over rod-end dampers. Our rugged front suspension delivers superior handling without the compromises of Mustang II style set-ups and it tells the world that this car does more than go in a straight line. The hot rod is delivered with the entire front suspension, spindles, steering rack, brakes, and fasteners.

Rear Suspension Clearly visible from behind (which is where most drivers will see the car from) is the proven Factory Five 4-link (standard) or 3-link (optional) solid axle suspension with high-end KONI™ coil-over shocks and tubular control arms. The 3-link rear suspension was lifted directly from our Challenge Series Racers, cars that have proven themselves on the track for more than ten years. The Hot Rod is delivered to you ready to accept bolt-on suspension components. There are two (2) rear suspension configurations that can be used on the hot rod. The standard suspension is a Ford Mustang 4-link rear configuration. An optional 3-link performance suspension is available for use with 8.8" axle.

Steering/Brakes A high quality Unisteer™ rack and pinion manual steering rack is standard. Front brakes are standard 2000 Ford Mustang GT brakes with 11" rotors and aluminum two-piston PBR calipers. Rear brakes are optional since many people obtain rear ends with brake assemblies.

‘33 Hot Rod Interior & Trim Complete Interior, Gauges, and Trim Standard The complete interior is included with the ‘33 Hot Rod. We include seats, full driver and passenger Simpson brand seat harnesses, carpeting, gauge package, steering wheel and steering column, ignition and switches, shifter and shift boot, interior door handles, upholstered door panels, removable roll bar, and choice of manual or automatic transmission cover. Side windows, power mechanisms, and outside door handles are available with the optional hard top. The beauty of the ‘33 Hot Rod interior is based on its simplicity and functionality. The molded doors flow seamlessly into the trailing edge of the dash. The dash is integral to the body and comes with a complete array of vintage gauges. The rear cockpit bulk head and trim piece are also included.

The cool thing about the Factory Five ‘33 Hot Rod is that it can go from hard top-coupe to convertible roadster in about an hour. Unbolt the hard top, slide in the roadster windshield, and that’s it. Rear padded cover shown above is standard, covers rear mount area of hard top. Car shown with roll bar removed.

Above: Customer Gary H. bought his Factory Five ‘33 in Jan. 2010. By July, his cranberry & creme coupe headlined the NSRA Nationals Show in Louisville, KY. He also won Best in Show at his local GoodGuys event and was selected for the 2011 DuPont Hot Hues Calendar. His car also appeared on Horsepower TV!

Factory Five customer Erik Hansen built his ‘33 Coupe, and proceeded to win “Best in Show” at the 2012 HB Cruise-In and back-to-back “Picture of the Month” on thefactoryfiveforum.com!

New Zealand customer Robin McDonald’s bright orange 780 HP Factory Five ‘33 is front page material on Hot Rod Magazine, NZ.

‘33 Hot Rod Body/Exterior Period Correct American Hot Rod Art Massive wheel wells, a steeply raked nose, and a lower and wider stance than any original ‘33 tells the world that this car is meant to be driven! The Factory Five '33 body is 3" wider than the original, has enlarged rear wheel wells, and rides lower to the ground. The body is engineered to mount easily to the strong steel and aluminum FFR chassis.

The hood, doors, trunk, and optional hard top have molded liners and come complete with hinges that mount to the chassis.

Complete exhaust system is polished stainless steel and standard with mufflers and side exit tips. Rear exit exhaust is an affordable option.

The curb weight of the car with a small block Ford V-8 and a manual 5-speed transmission is 2,150 lbs.

The composite body is hand-laid vinylester fiberglass. The one-piece, construction is 3/16” uniform thickness with approximately .015” coat of gel coat outer finish.

Cool deatils like LED tail lights and fuel cap that is concealed inside the trunk lip make the car a true custom.

All lighting, glass and latches are DOT approved components.

Customize your Factory Five! Roadster, coupe, hard top or convertible, full fenders, bike fenders, or no fenders street-fighter. We designed removable engine side covers, a removable hard-top with a separate slide-in windshield, and two different sets of removable fenders (full fenders with running boards and smaller bike fenders).

The high performance KONIâ&#x201E;˘ coil-over shocks are concealed and the tubular control arms are visable for a clean look. Expensive exterior trim items are all standard. You get head lamps, tail lights/turn signals, license plate bracket and light, cast aluminum grill, badges, side view mirrors, trunk handles and hinges, full-width removable roll bar, and polished slide-in roadster windshield.

‘33 Hot Rod Specifications A Hot Rod that Handles like a Porsche In the world of hot rods, customs and kit cars, we stand miles above the crowd and a big reason for this is our commitment to racing development and safety. Only by racing your products can you learn real performance, and racing gives you a deep appreciation for safety and engineering. The Hot Rod has benefitted from our 15+ years of racing experience. The Hot Rod weighs 2,150 lbs and when powered by a modest 300 HP small block, it'll make most modern sports cars feel slow and heavy.

Engines Displacement: Induction: Drivetrain/Suspension Front Suspension Type: Rear Suspension Type: Shock-Springs: Steering: Brakes:

Construction Layout 289/302/351/4.6L/5.0L Coyote/SB & LS Chevy Multi-Port Fuel Injection or Carburated Manual or Automatic Transmission Inboard Independent Double Arm Solid Rear Axle 4-Link or 3-Link with Panhard Bar Koni™ Adjustable Coil Over Rack and Pinion 3.25 turns lock-lock Vented 11 in. Disc Front

Layout: Frame: Roll Bar: Sub-Structure: Restraint System:

Front Engine RWD Roadster/Coupe Tubular Space Frame Full width structurally mounted 1.5” Tubing Aluminum Paneling Riveted/Bonded to Frame 5 Point Simpson Harness

Vehicle

Performance 0-60 MPH: 1/4 Mile: Top Speed: Braking:

< 4.0 Seconds Est. < 12.0 Seconds Est. N/A 110 Ft. from 60 MPH Est.

Weight: Weight Distribution F/R: Wheelbase: Overall Length: Front Track: Rear Track: Overall Height: Overall Width: Ground Clearance: Fuel Capacity:

2,150 lbs. est. 50.0/50.0 (%) 112 in. 154 in. 54.5 in. 60.0 in. 52.5 in. 72.0 in 4.5 in. 15 Gallons

Optional hard top fits over and conceals removable dual roll bar.

‘33 Hot Rod Stage 1 Package

$9,990

Most people purchase our complete ‘33 Hot Rod package which costs $19,990. We also sell the car in two stages (that cost $9,990 each). Stage 1 includes the chassis and suspension parts. Stage 2 gives you the body, interior, and trim you need to finish your car. Here’s what comes with each package.

What You Get Stage 1 Frame: Complete jig-welded tube frame. Includes all mounts ready to accept small block Ford and 4.6L engines. • Includes full width roll bar • Mounts either 3 or 4 link suspension Ch assi s Al umin um Pan els: Includes 26 CNC cut, pre-formed 6061T6 aluminum panels for cockpit, trunk, and engine bay. • 1200 pre-packaged rivets1/8” short & long, 3/16” short & long • Complete cockpit aluminum • 1/8" firewall between engine and passenger compartment Complet e Front Suspen sion: Unequal length a-arm control arms with in-board coil-over shock suspension. Comes complete with parts and fasteners. • Koni brand high performance monotube, rod-end shock absorbers • Coil-over kit for Koni dampers including spring hat, threaded seat and black powdercoated performance springs • Adjustable lower control arms with ball joints and fasteners • Upper tubular control arms with ball joints and fasteners • Grade-8 mounting hardware. Fac tory Fi ve Rear Suspensi on: • 4-Link Suspension • Koni brand high performance monotube, rod-end shock absorbers • Coil-over kit for Koni dampers including spring hat, threaded seat and black powdercoated performance springs • Factory Five tubular upper and rear lower control arms, w/polyurethane bushings and fasteners Complet e Front Brake Ki t: • Custom spindles w/fasteners • Front hubs, fasteners and dust covers • Front brakes, Ford GT 11” front rotors w/twin piston calipers, brake pads and fasteners • Master cylinder (listed in pedal box assembly), stainless braided brake line, front and rear w/mount clips, banjo bolts and brake line mounting fasteners

• Pre-flared 3/16” brake line and brake line T-adapter • Emergency brake handle, fasteners and cable Compl et e Steerin g System: Complete steering system using rear steer manual rack from tie rod ends and fasteners to steering wheel and badges. • Manual steering rack w/inner and outer tie rod ends and fasteners • Polyurethane steering rack bushing and fasteners • Nickel plated lower steering shaft • 14” banjo steering wheel w/boss and ceramic F5R center section and fasteners • Steering system, including flange bearings and fasteners • Custom Ididit steering column with frame mounts Compl et e Fuel System/ Parts: This assembly provides everything from the gas cap to the lines, and is designed to work with carburetors or fuel injection systems. External fuel pump required. • Fuel tank w/mounting hardware, vent, gaskets, pick-up and fuel level sending unit • Fuel filler neck and fasteners • Pre-flared fuel lines (1/4” and 5/16”) w/unions, barbs, hose clamps and high press flex lines and fasteners • Aircraft style brushed aluminum fuel cap with gaskets, ground strap, fuel hose to tank w/fasteners. • 3/8” line fuel filter, connectors and hose clamps Compl et e Cooli ng System/ Parts: Electric cooling fan and mounting hardware, radiator hoses, and all necessary fasteners. • Electric cooling fan and mounting kit w/connectors • Aluminum radiator w/cap and in-line filler neck • Built in transmission cooler in radiator • Stainless Steel radiator hose kit incl. adapter kit, fasteners and hose • Overflow tank w/cap, hoses, hose clamps and mounting hardware • 185 degree thermostat switch and wiring

E ngi ne Acc essories: The '33 Hot Rod kit is configured to accommodate the engine of your choice. • Engine/Transmission mounts (select 302/351, 4.6L, 5.0L Coyote, SB and LS Chevy), with fasteners • Exhaust, with gaskets and fasteners. Dri veshaf t: Select from one of three available driveshafts w/fasteners to match the engine/trans of your choice. Select one of the following: • 28 spline driveshaft for T-5, AOD, or Tremec 3550s • 31 spline driveshaft for Tremec TKO 500 or 600s • 31 spline driveshaft for 4.6L or 5.0L Coyote engines w/T-45s or 3650s Compl et e Ped al Box and Compo n ent s: The '33 Hot Rod kit utilizes the proven Wilwood brand pedal box w/fasteners and all the required ancillary parts. • Wilwood pedal box and mounting hardware • Master cylinders • Accelerator pedal, accelerator cable, return spring and ball stud retainer, w/fasteners • Brake line adapters and T-fittings A ssembly Man ual: Bound assembly manual that is full of pictures and diagrams. Fasten ers: Over 1600 top quality zinc plated, chrome and stainless steel USS and SAE fasteners, numbered and packed individually by assembly.

What You Need to Finish Your ‘33 Hot Rod Stage 1 • Stage 2 Package • Engine/Transmission/Rear End with brakes

• Wheels and Tires

‘33 Hot Rod Stage 2 Package What You Get Stage 2 Body: Hand laid 3/16” laminate composite body and panels made with vinylester resin. • Driver and Passenger doors with molded door liners • Hood with hood liner • Trunk with molded trunk liner • Includes secondary body fasteners assembly. • Adhesive backed and foam weatherstrip • Door edge trim and fasteners • Trunk push on rubber bulb seal • Rubber hood bumpers • Includes multi-adjustable door hinges with bronze bushings w/fasteners • Includes hidden trunk hinge kit, hinge support plates and fasteners • Includes hood hinge kit with supports and fasteners. Comp lete Int eri or Acc essories: The '33 Hot Rod kit comes with all the interior accessories you need. Bucket seats, door latches, rear view mirrors, and more complement the dash and gauges assembly for a full interior. Check out this full list of standard parts and assemblies. • Bucket metal framed seats, black vinyl w/fasteners • 5-point Simpson brand harnesses. 3” wide driver and passenger, frame mounted w/fasteners • Complete cockpit carpet set, black all-

weather • Emergency brake boot, black vinyl • Interior rear view mirror w/fasteners • 6-gauge electronic Autometer Platinum gauges (see description below in gauge assembly) • Interior door latches and fasteners • Shifter boot and fasteners • Banjo style steering wheel (listed in steering assembly), w/polished aluminum boss and center badge. G auges, Dash, an d El ectri cal As sembly: Complete assembly comes dash buttons, toggles and indicator lights, switches, and horn. • Custom fit chassis wiring harness • Ignition switch and F5R key, headlight switch, Hi-Low beam switch, starter solenoid and horn button. • Dash indicators: Green, Blue dash lights • Wiring harness mounting kit and hardware including Fuse panel mount • Insulated line clip hardware and fasteners with cable ties • Battery ground strap • Speedometer sending unit, pigtail, fasteners and 3.55 speedometer gear • A complete set of 6 Autometer Platinum electronic gauges, w/connectors, terminals and installation kit. Includes the following gauges: • Speedometer • Tachometer • Oil Pressure Gauge • Water Temperature Gauge

The Factory Five ‘33 powered by Ford’s 600 HP “Aluminator” engine debuted in the Ford Racing booth at SEMA ‘08 in Vegas and won the 2008 Global Media Award, Best Engineered Product Runner-up, and was selected by Sony Playstation’s Gran Turismo game as Best Hot Rod!

$9,990

• Fuel Level Gauge • Voltmeter Exteri or Ac cessori es and Ligh tin g: Along with the goodies on the inside of the car, the '33 Hot Rod kit is loaded with the right exterior parts and trim on the outside. • Aluminum '33 Ford front grill • Aluminum windscreen, tinted with fasteners. DOT safety glass compliant • License plate light and bracket with fasteners • Ceramic F5R badging nose and tail • Headlamp assemblies, including chrome buckets, halogen headlamps, with integral turn signal, and fasteners (DOT approved). • Red rear LED tail-lights • All lighting is DOT approved.

What You Need to Finish Your ‘33 Hot Rod Stage 2 • All parts from Stage 1 • Paint

‘33 Hot Rod Complete Package $19,990 What You Get The Factory Five ‘33 Hot Rod comes with all of the parts you need to build your car except for the engine, transmission, rear-end, wheels, tires and paint. Frame: Complete jig-welded tube frame. Includes all mounts ready to accept small block Ford and 4.6L engines. • Includes full width roll bar powder coated to match • Accommodates either 3- or 4-link suspension Body: Hand laid 3/16” laminate composite body and panels made with vinylester resin. • Driver and passenger doors with molded door liners • Hood with hood liner • Trunk with molded trunk liner • Includes secondary body fasteners assembly. • Adhesive backed and foam weatherstrip • Door edge trim and fasteners • Trunk push on rubber bulb seal • Rubber hood bumpers • Includes multi-adjustable door hinges with bronze bushings with fasteners • Includes hidden trunk hinge kit, hinge support plates and fasteners • Includes hood hinge kit with supports and fasteners and stainless prop rod. Chassis Aluminum Panels: Includes 26 CNC cut, pre-formed 6061-T6 aluminum panels for cockpit, trunk, and engine bay. • 1200 pre-packaged rivets1/8” short & long, 3/16” short & long • Complete cockpit aluminum • 1/8" firewall between engine and passenger compartment Complete Front Suspension: Unequal length a-arm control arms with inboard coil-over shock suspension. Comes complete with all parts and fasteners. • KONI™ brand high performance mono-tube, rod-end shock absorbers • Coil-over kit for KONI™ dampers including spring hat, threaded seat and black powder coated performance springs • Adjustable lower control arms with ball joints and fasteners • Upper tubular control arms with ball joints and fasteners • Grade-8 mounting hardware Factory Five Rear Suspension: 4-Link Suspension • Koni™ brand high performance mono-tube, rod-end shock absorbers • Coil-over kit for Koni™ dampers including spring hat, threaded seat and

black powder coated performance springs • Factory Five tubular upper and rear lower control arms, with polyurethane bushings and fasteners Complete Front Brake Kit: • Custom spindles with fasteners • Front hubs, fasteners and dust covers • Front brakes, Ford Mustang 11” front rotors with twin piston PBR calipers, brake pads and fasteners • Master cylinder (listed in pedal box assembly), stainless braided brake line, front and rear with mount clips, banjo bolts and brake line mounting fasteners • Pre-flared 3/16” brake line and brake line T-adapter • OEM Ford Mustang emergency brake handle, fasteners and cable Complete Steering System: Complete steering system using rear steer manual rack from tie rod ends and fasteners to steering wheel and badges. • Manual steering rack with inner and outer tie rod ends and fasteners • Polyurethane steering rack bushing and fasteners • Nickel plated lower steering shaft • 14” banjo steering wheel with boss and ceramic FFR center section and fasteners • Steering system, including flange bearings and fasteners • Custom Ididit steering column with frame mounts Complete Fuel System/Parts: This assembly provides everything from the gas cap to the lines, and is designed to work with carburetors or fuel injection systems. External fuel pump required. • Fuel tank with mounting hardware, vent, gaskets, pick-up and fuel level sending unit • Fuel filler neck and fasteners • Pre-flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high press flex lines and fasteners • Aircraft style brushed aluminum fuel cap with gaskets, ground strap, fuel hose to tank with fasteners • 3/8” line fuel filter, connectors and hose clamps Complete Cooling System/Parts: Electric cooling fan and mounting hardware, radiator hoses, and all necessary fasteners. • Electric cooling fan and mounting kit with connectors • Aluminum radiator with cap and filler neck • Built in transmission cooler in radiator • Stainless steel radiator hose kit includes

adapter kit, fasteners and hose • Overflow tank with cap, hoses, hose clamps and mounting hardware • 185 degree thermostat switch and wiring Engine Accessories: The ‘33 Hot Rod kit is configured to accommodate the engine of your choice. • Engine/Transmission mounts (select 302/351, 4.6L, 5.0L Coyote, SB and LS Chevy), with fasteners • Exhaust, with gaskets and fasteners Driv esh aft: Select from one of seven available driveshafts w/fasteners to match the engine/trans of your choice. • 28 spline driveshaft for T-5, AOD, or Tremec 3550s • 31 spline driveshaft for Tremec TKO 500 or 600s • 31 spline driveshaft for 4.6L or 5.0L Coyote engines w/T-45s or 3650s • 31 spline for LS engine with TKO transmission • 31 spine for SB Chevy with TKO transmission Gauges, Dash, and Electrical Assembly: Complete assembly comes with dash buttons, and indicator lights, switches, and horn. • Custom fit chassis wiring harness • Ignition switch and FFR key, headlight switch, hi-low beam switch, starter solenoid and horn button. • Dash indicators: green, blue dash lights (LED) • Wiring harness mounting kit and hardware including fuse panel mount • Insulated line clip hardware and fasteners and cable ties • Battery ground strap • Speedometer sending unit, pigtail, fasteners and 3.55 speedometer gear • A complete set of 6 Autometer Platinum electronic gauges, with connectors, terminals and installation kit. Includes the following gauges: • Speedometer • Tachometer • Oil Pressure Gauge • Water Temperature Gauge • Fuel Level Gauge • Voltmeter Complete Interior Accessories: The ‘33 Hot Rod kit comes with all the interior accessories you need and want. Bucket seats, door latches, rear view mi rors, and more complement the dash and gauges assembly for a full interior. Check out this full list of standard parts

and assemblies. • Metal framed bucket seats, black vinyl with fasteners • 5-point Simpson brand harnesses; 3” wide driver and passenger, frame mounted with fasteners • Complete cockpit carpet set, black all-weather • Emergency brake boot, black leather • Interior rear view mirror with fasteners • 6-gauge electronic Autometer Platinum gauges (see description above in gauge assembly) • Interior door latches and fasteners • Leather shifter boot and fasteners • Rear cockpit trim piece • Pleated door panels • Stitched arm rest • Banjo style steering wheel (listed in steering assembly), with polished aluminum boss and center badge. Exterior Accessories and Lighting: Along with the goodies on the inside of the car, the ‘33 Hot Rod kit is loaded with the right exterior parts and trim on the outside. • Polished windscreen, tinted with fasteners; DOT safety glass compliant • License plate light and bracket with fasteners

• Ceramic FFR badging nose and tail • Headlamp assemblies, including chrome buckets, halogen headlamps, with integral (LED) turn signal, and fasteners (DOT approved). • Red rear LED tail lights • All lighting is DOT approved Complete Pedal Box and Components: The ‘33 Hot Rod kit utilizes the proven Wilwood brand pedal box with fasteners and all the required ancillary parts. • Wilwood pedal box and mounting hardware • Master cylinders • Accelerator pedal, accelerator cable, return spring and ball stud retainer, with fasteners • Brake line adapters and T-fittings

What You Need to Finish Your ‘33 Hot Rod Complete • Engine/Transmission/Rear End with Brakes • Wheels and Tires • Paint

Assembly Manual: Bound assembly manual that is full of pictures, diagrams, and CAD drawings. Fasteners: Over 1600 top quality zinc plated, chrome and stainless steel USS, metric and SAE fasteners, numbered and packed individually by assembly.

Order Your ‘33 Hot Rod Three ways to order! Fill out this form and fax to 508-291-3883, OR call us at 508-291-3443 or place your order online at www.factoryfive.com.

Information About You First Name: Last Name: Street Address: City: State: Zip: Phone (D): Phone (H): Phone (Cell): Email:

Information About Your Order Will you pick up your kit at the Factory or have it shipped? O Self Pick-up

O Stewart Transportation O Other Shipping

Stewart Transportation is our recommended carrier for customers who want their kits shipped (888-737-4852). If you are using a different carrier, you will need to determine whether or not they will require your kit and boxes to be placed in a crate, if so, select the shipping crate option. O 13600 Shipping crate ($695)

16’L x 52” H x 6’6” W

When do you want your kit? (select either ASAP or enter your most convenient): O ASAP

O Desired Date: _________________

Your kit comes with a Manufacturers Certificate of Origin (referred to as a COO or MSO). This is the titling document that records the manufacturer of the chassis/body. It is important that the information recorded on the front of the Certificate of Origin (owner’s information) is correct and accurate. Please record this information (only required if different than section 1 above). First Name: Last Name: Street Address: City: State: Zip:

Order and Deposit Hot Rod orders require a $1,000 deposit. Please complete the spaces below. Indicate payment method (circle one)

Credit Card

Personal Check

Card # _________-_________-_________-_________ (Visa, MC, or Discover)

Cash

Wire

Expiration (month/year):

You will receive a confirmation of this order via regular mail or email with your order, estimated ship date and related documents.

Configure Your ‘33 Hot Rod Select a chassis coating type: 33274 Bare ’33 Hot Rod Chassis (requires coating) 33365 Powder Coated Chassis – Black, includes Powder Coated Roll Bar

No Charge $399

33462 33460 33919 33770 33802

Select an Engine / Exhaust System being installed: Applies to Stage 1 and Complete Package Installing 289/302/351 Ford Engine No Charge Installing 4.6L Ford Engine No Charge Installing 5.0L Ford Coyote Engine (includes shorty headers) $599 Installing Chevy LS Series Engine No Charge Installing Small Block Chevy Engine No Charge

33465 33468 33466 33469 33042 33775 33869

Select a Driveshaft: Applies to Stage 1 and Complete Package 28 spline driveshaft for Small Block with T-5, AOD, or Tremec 3550 transmissions 28 spline driveshaft for Flathead with T-5, AOD, or Tremec 3550 transmissions 31 spline driveshaft for Tremec TKO 500 and 600 transmissions 31 spline driveshaft for 4.6L/5.0L Coyote motors with T-45 or Tremec 3650s 31 spline driveshaft for 302/351/4.6L/5.0L Coyote motors with T-56 transmission 31 spline driveshaft for LS engine with Tremec TKO 500 or 600 transmission 31 spline driveshaft for Small Block Chevy with TKO 500 or 600 transmission

No Charge No Charge No Charge No Charge No Charge No Charge No Charge

13939 14260 14966 13852

Select your Seat Preference: Applies to Stage 2 and Complete Package Black vinyl Roadster seats Upgrade: Leather Roadster Seats Upgrade: Vintage Low-Back Aluminum Race Seats w/Black Vinyl Covers Upgrade: Competition High-Back Aluminum Race Seats w/Black Fabric Covers

No Charge $499 $399 $399

Choose your Rear Suspension: Applies to Stage 1 and Complete Package 33461 Four-link rear suspension w/Koni coil-over shocks, upper & lower control arms and fasteners. Set up for 8.8” Ford solid axle or equivalent 33248 Three-link rear suspension w/Koni coil-over shocks, upper link & lower control arms and fasteners. Set up for 8.8” Ford solid axle or equivalent Choose a hood type: Applies to Stage 2 and Complete Package 33297 Standard Hood 33638 Upgrade: Extra Clearance Hood for supercharged applications, etc. Fitment must be confirmed in each case, due to variability of engine configurations.

No Charge $699

No Charge $199

Popular Options 33648 Upgrade: Tilt Steering Column, Paintable 33647 Upgrade: Tilt Steering Column, Chrome Plated

$399 $449

33659 Hot Rod A/C – Heater – Defrost Kit: Comes with everything needed to Install less Compressor and Compressor mounting hardware

$1199

33784 Removable Hard Top Package 33783 Power Windows and Door Handles for Removable Hard Top

$1999 $499

33470 Fender Kit – Full Fenders with Running Boards and Hardware 33632 Fender Kit – Bike Fenders with Front Spindle Mounts and Hardware

$1299 $799

33742 Rear Exit Exhaust - Polished Stainless Steel Rear Exit with Tips

$599

14970 8.8” Ford solid rear axle with Traction-Lok differential, 3.31 gears, and 31 spline 5 lug axles – for 3 link ONLY – drop shipped

$1899 + S/H

14834 Rear Brake Kit with 11.65” Rotors, Calipers, Brackets, Pads, Stainless Steel Lines, E-Brake Cables, and Hardware

$699

Performance Wilwood Brakes, 12.88" Front Performance Wilwood Brakes, 12.19 Rear These high performance brakes come slotted and you must choose either red or black calipers and cross-drilled or solid rotors. 33702 '33 Hot Rod Wheels 17" x 9" Front and 18" x 10" Rear

$1149 +SH $639 + S/H

$699 + S/H

Optional Wilwood brakes. Pick from red or black, slottred or slotted & drilled.

The standard car comes with cool side exit exhaust. Optionail twin rear exit exhaust system delivers a custom look and the entire system is polished stainless.

The optional Factory Five 17” front and 18” rear Hot Rod wheels are an affordable and high-performance option.

Hot Rod Magazine’s Rob Kinnan drops the hammer on the sinister black, 450 HP Factory Five ‘33 during a stop on the 2010 Hot Rod Power Tour. The car was featured on the cover of Hot Rod Magazine! Left: Customer Tony Zullo bought a Factory Five ‘33 in late 2009. Six months later, he won “Best in Show” at the 2010 New England Summer Nationals against cars costing four times as much.

Right: The crews at HorsePower TV and MuscleCar TV built a Factory Five ‘33 with Ford’s new 5.0L engine.

When we say the Factory Five Hot Rod is computer designed, we mean it. The ‘33 is used extensively in an official collegiate text book on SolidWorks and 3-D solid modeling.

This Factory Five ‘33 was selected as one of the Top 10 Cars of the 2011 SEMA Show by MSN.com and NASCAR driver David Ragan.

Made in the USA

FACTORY FIVE RACING

9 Tow Road, Wareham, MA 02571 Phone: (508) 291-3443 Fax: (508) 291-3883 www.factoryfive.com

Hours Monday - Friday Saturday Tours

9 AM to 5 PM EST 9 AM to 12 PM EST