8 minute read
Compaction
Sponsored By ASPHALT ROLLERS
Case DV209D & DV210D Double Drum Asphalt Rollers
Tier 4Final double drum vibratory asphalt rollers deliver 100% tractive effort due to balanced drum design. • 100-hp
Deutz engine • Updated cooling system and automatic idle control • Automatic vibration control • Oscillating articulated roller joint oscillates +/- 6 degrees • Pressurized triple-filtration water • Steering wheel instrument cluster and digital display • Available high-frequency option for frequencies up to 4,020 vpm • Available models featuring both a vibratory front roller and rear pneumatic tires • Compaction meter monitors material densities in real time
www.ForConstructionPros. com/12310834
SAKAI GW754 Vibratory Pneumatic Roller
Widely versatile for various types of materials from hot mix asphalt (HMA) mixes to soils. • Vibrating tires massage materials dynamically and compact them more uniformly • Tier 4 final Kubota V3800 turbo charged engine • 2400 vpm and four amplitude settings, which are changeable on the fly • 22,440 lbs., vs. static pneumatic tire roller which weighs 55,000 lbs. • Single-seat operator station layout with 180° of easy-rotation • GW754 as it has a maximum of 45 dB at 50 ft. on the maximum amplitude setting for quiet compaction operations required for bridge deck and in residential area
www.ForConstructionPros. com/21109564
Caterpillar CB13, CB15 and CB16 Tandem Vibratory Rollers
The CB13, CB15 and CB16 fit in the 13-, 15- and 16-ton weight classes and are powered by a 142-hp C4.4 engine with standard Eco-mode and automatic speed control. • Vibratory options include oscillatory vibration, dual amplitude, dual frequency, Versa
Vibe and five amplitude systems • Available Cat Compaction Control with Pass-Count and Temperature Mapping systems and “Machine to Machine” communication • Center-articulating hitch offers 6° of oscillation • Offset hitch option extends coverage up to 6 in. • 360° seat positioning option
www.ForConstructionPros.com/20989782
Musson Rubber Vinyl Back Cocoa Mat Road Rollers
Musson Rubber Vinyl Back Cocoa Mat Road Rollers are made with fibers from the almost indestructible outer husk of the coconut. • Fibers are bonded into a vinyl back (overall thickness of 1-3/16-in.), making it much easier to secure to the equipment than woven-back cocoa matting • These vinyl back Musson Road Roller
Mats can be installed much easier than woven mats and can easily be cut to fit without the mat unraveling • If small holes are needed for installation, a sharp knife or punch will do the job
www.ForConstructionPros. com/21011830
Dynapac CO4200 Generation VI Double-drum Roller
The CO4200 Generation VI roller features an oscillation force of up to 27,450 lbs. with an oscillation frequency of 2,400 vpm. • Delivers up to 28,780 lbs. of centrifugal force and 3,060 vpm in high amplitude mode and 18,880 lbs. of centrifugal force and 4,020 vpm in low amplitude mode • Drum shell fabricated from Hardox 450 abrasion-resistant steel • Balanced operating mass for front and rear modules helps reduce roller marks and deliver a consistently compacted surface • Dual Cummins QSF3.8 water-cooled turbo diesel engines • Can reach ground speeds of up to 7.5 mph
www.ForConstructionPros. com/21021876
HAMM HP Series Pneumatic Rollers
The HP 180 and HP 180i pneumatic tire rollers offer operating weights of 8t to a maximum of 18t and the HP 280 and HP 280i feature operating weights between 10t and a maximum of 28t. • Feature a modern, spacious operator's platform or panoramic cabin • Operating weight quickly adjustable to suit the asphalt type, layer thickness and application with flexible ballasting • User guidance assisted by the unambiguous color-coded grouping • Drive control via a joystick ergonomically positioned on the armrest
BOMAG Alternative Fuel Options for BW 120 Tandem Rollers
Three different solutions for the BW 120 tandem vibratory roller. • Traditional diesel-powered that meets stringent Tier 4 Final emissions standards • BOMAG BW 120 AD-5 offers two alternative drive model concepts: the electric drive BW 120 AD-5 E and gas BW 120 AD-5 LPG • Liquid petroleum gas BOMAG BW 120 AD-5 LPG alternative drive is perfect for inner-city applications and construction projects with tight environmental standards. • BW 120 AD-5 LPG delivers an operating time of up to 5 hours • Electric drive BW 120 AD-5 E delivers zero exhaust gas and fine dust emissions, making this flexible model the perfect alternative for operating in enclosed spaces • The roller’s 24.8-hp electric motor has no interval maintenance items. Reduced complexity of the electric drive system compared to conventional drives.
www.ForConstructionPros. com/21118970
Mauldin 6000 Asphalt Roller
The 6000 asphalt roller features a 6,000-lb. operating weight and a 24-hp Kubota engine. • Adjustable 2-in. drum offset • Large-diameter drum • 54-gal. pressurized water system • Designed for operator comfort
Trimble Roadworks Paving Control Platform for Asphalt Compactors
The Roadworks Paving Control Platform enables operators to accurately control the compaction process, while reducing unnecessary passes. • Intuitive Android-based software maximizes ease of use • Asphalt temperature mapping provides color-coded data to allow operators to compact at the correct temperature • Compatibility with Trimble WorksOS and WorksManager software enables construction-ready models • Productivity data collected from the machine is automatically synced back to the office
www.ForConstructionPros.com/22031112
SAKAI Guardman Automatic Braking System
The Guardman Automatic Braking System helps reduce accidents on the jobsite due to human error, especially during reverse operation during compaction. • 3D lidar sensor is used to detect workers behind the roller, slowing the machine down automatically • Braking is controlled to maximize workability of the roller • Display alerts drivers of surroundings at all times
www.ForConstructionPros. com/22158860
Ammann ARX Tandem Rollers
The ARX 23.1-2 Stage V, ARX 23.1-2C Stage V, ARX 26.1-2 Stage V and ARX 26.1-2C Stage V tandem rollers feature a 24.8-hp Kubota D1703-M-DI diesel engine that does not require any aftertreatment technology to meet Tier 4 Final standards.
• The “C” versions are combination machines that utilize a steel drum in front and four pneumatic tires in the rear • Operating weights from 4,650 to 5,420 lbs., drum widths from 39.4 to 47.2 in. and a 1.57-in. maximum working offset mode • Electronic drive lever allows for smooth starts and stops, and a simple dashboard with intuitive machine control helps even inexperienced operators
www.ForConstructionPros. com/21378569
HAMM WITOS HCQ Software
HCQ Navigator from HAMM uses a panel PC in the roller cabin to provide a live indication to roller drivers of the points that were already sufficiently compacted or where further compaction is necessary. This prevents over- and under-compaction while helping to optimize the number of passes. • HCQ makes it possible monitor the compaction progress – in real time • Supervisors can stay informed about the detailed construction progress at all times – without ever traveling to the site • HCQ Navigator saves all of the data that is recorded during the compaction process
Sponsored By ASPHALT ROLLERS
Volvo Compact Assist Start
Entry-level intelligent compaction package includes pass and temperature mapping functionalities to provide realtime data about job progress. • Pass mapping gives a clear on-screen view of the roller’s coverage of the asphalt, highlighting stop points and overlaps • Temperature mapping offers a colorcoded map of surface temperatures plus ability to set a maximum/ minimum range • Available on DD110C, DD120C,
DD128C and DD140C asphalt rollers • Comes ready to upgrade to Compact
Assist or Compact Assist with
Density Direct
www.ForConstructionPros. com/21415701
Case DV36D, DV45D and DV45CD Vibratory Rollers
High curb clearance and no overhangs for small- to midsize compaction applications. • Drums can be offset to further improve access and performance during turns • Powered by a 43.5-hp Tier 4 Final engine • Feature 8,290- to 10,340-lb. operating weights, selectable dual frequencies (2,700/3,420 vpm) • ISO-mounted operator platform with standard lateral-sliding seat • Standard 50-gal. water tank with pressurized water system • Compatible with the Case ACE Force
Intelligent compaction system
www.ForConstructionPros. com/21061353
For more information visit
https://pavemg. com/ckaq9p
Caterpillar CW16 Pneumatic Compactor
Efficient performance on highways, city streets, county roads, lane additions, industrial sites, overlays, or other mid-size jobs. • Designed for use on granular materials and all types of asphalt-mix designs, the Cat CW16 pneumatic roller is available as a standard nine-wheel model with a 69-in. compaction width or as an optional 11-wheel model with an 84-in. compaction width • Operating weight can be adjusted to suit job requirements • Oscillating front wheels assist in compacting soft voids • A tire overlap of 1.25-in. ensures even compaction across the surface
www.ForConstructionPros.com/21009845
Dynapac CC1300VI and CC1400VI Asphalt Rollers
The double-drum CC1300VI and Highfrequency compaction with a choice between dual frequencies (3,240/2,940 vpm). • Dual amplitude (0.02/0.007 in.) function provides added flexibility to for different thicknesses • Kubota Tier 4 Final engine with ECO mode • Optional dual edge pressers, asphalt temperature meter, front rightmounted edge presser/edge cutter, and more • Available combi-version incl. four static rubber wheels at the rear
www.ForConstructionPros. com/21259834
BOMAG BW 120 SLC-5 Combination Roller
Features a steel front vibratory drum joined with four smooth rear rubber tires to elevate compaction results on a wide range of surfaces. • 24.8-hp Kubota diesel engine meets
Tier 4 Final standards • 47.2-in-wide front steel drum • Ergonomic control panel layout with clear symbols • Material manipulation provided by the rear tires delivers a better finish for joint construction
CASE PT240D Pneumatic Roller
Has an operating weight of 21,380 lbs. and the ability to ballast up to 52,910 lbs. • Tire configuration (four in front and four in back) features a 2-in. overlap and a total compaction width of 78 in. • Kneads hot-mix asphalt gently at the surface as it rolls for greater asphalt density and fewer voids in the finished product • Iso-static front axle allows each of the front tires to oscillate 3° in either direction, as well as up and down • Primary service points centrally grouped for ease of access
www.ForConstructionPros. com/21113079
HAMM C Series Compaction Equipment
With a reinforced hydrostatic drive that delivers up to 30% more torque, traction and climbing are even better than standard models, tackling inclines in excess of 60%. • Able to deal with heavy earthwork, landfill construction and the compaction of soils • Fuel consumption is nearly identical models without reinforced drives • High level of torque is also impressive when using the dozer blade
