5 minute read
Milling Machines
Sponsored By
Wirtgen W 100 Fi, W 120 Fi and W 130 Fi Cold Mills
Mid-sized cold mills feature a max milling depth of 13 in., and are powered by a Cummins 6-cylinder Tier 4i engine generating 320 hp. • Standard working widths of 39 in. (W 100 Fi), 47 in. (W 120 Fi) and 51 in. (W 130 Fi) with a frontloading system, all on a common platform • Front-loading conveyor enables swift and smooth loading of large quantities • WIDRIVE machine control system keeps the engine speed within the optimal range • Available as track-mounted or wheel-mounted models • Large steering lock to allow for narrow bends and flush-to-curb milling
www.ForConstructionPros.com/12039394
Caterpillar PM825 Cold Planer
Series has operating weights from 79,630 to 82,650 lb. and cutting widths from 79 to 98.6 in. • Three electronically controlled cutting settings • 755-hp Cat C18 ACERT Tier 4 Final engines iso-mounted to reduce vibration • Hydrostatic drive with two variabledisplacement propel pumps supplying a variable-displacement motor at each track • Automatic traction control system minimizes track slip in extreme conditions • Standard four-mode steering with electronic control module • Hydraulically controlled front loading conveyor
www.ForConstructionPros. com/20980992
Roadtec Auto Cut Precision Milling Technology
Auto Cut allows milling machine operators to easily raise the mill, walk over obstacles, walk back into the cut and resume milling at the same depth, without reprogramming or delay. • Easy to use, intuitive interface can be learned in minutes • Additional HMI switches mounted to the top of the ACE display box • Heavy-duty smart cylinders with independent sensors on each leg provide more precise depth measurements • Data continuously updated and displayed • Currently available on the RX-600e cold planer
www.ForConstructionPros. com/20990543
BOMAG Ion Dust Shield
The ION Dust Shield was specially developed for cold milling machines to transfer dust away from the operator and eliminate fine particles (PM 2.5, PM 10) by up to 80%. • In addition to visible dust, a considerable amount of particulate matter is also produced when removing an asphalt surface and the ION
Dust Shield binds the fine particulate matter by electrically charging the particles • The particles clump permanently to harmless coarse dust and can be easily removed which leads to a reduction in particulate matter of over 80% - as confirmed by the
IGF Institute for Hazardous Substances Research at the Ruhr University
www.ForConstructionPros.com/21259817
RoadHog G5HD Heavy-duty Cold Planer
The Generation 5 HD (G5HD) heavyduty cold planer for skid steers is equipped with a Fairfield 7HBX planetary coupled to a Sauer M44 piston motor. • Available in cutting widths of 18, 24, 30, 40 and 48 in. • Can achieve up to an 8-in. cutting depth for optimal base repair and stabilization work • 5-in. tooth clearance for reduced drag in cuts below 2.5 in. • Features include a 3/4-in. chassis and housing plate, 1.5-in. walled cutting drum and a durable front steel debris guard
www.ForConstructionPros. com/21219716
Element Six MasterGrade GH Cutting Bit
Element Six MasterGrade bits use ‘Nano-technology’ to enhance the cobalt binder matrix and optimize the bit’s toughness. These innovative carbides result in a versatile bit that offers greater wear resistance, improved tool life and increased operating efficiency. • Large carbide cap provides protection to steel body • Improved hardened washer for better wear and holder protection • Full sleeve retainer designed for superior holding
www.ForConstructionPros. com/22314466
Sponsored By MILLING MACHINES
Roadtec RX-505 Cold Planer
The 610-hp RX-505e/ex half-lane cold planer is a lightweight, maneuverable machine suited for a range of milling applications. • Capable of cutting 79 or 86 in. wide and up to 13 in. deep • Rear object detection is designed to stop the mill if a person or object is detected behind the machine while it is in reverse and includes additional sensors and ground level buttons allowing crew members to disable reverse if needed • Belt lift device is used to lift the cutter drum drive belt
www.ForConstructionPros. com/21121377
BOMAG BM 2500/75 Milling Machine
The BM 2500/75 half-lane mill offers a range of standard, fine, micro and power drum designs to meet a variety of milling needs. • 771-hp diesel engine and mechanical drum drive • 98.4-in wide cutter delivers cutting depths reaching 13.8 in. • Three milling speeds include ECO (100 rpm), Universal (112 rpm) and Speed (131 rpm) • 60° left/right swiveling outer conveyor offers up to a 16.4-ft. discharge height and transfers millings to either side of the machine at rates up to 285.3 fpm • All-crawler steering and crab walk for optimal on-site maneuverability
www.ForConstructionPros. com/21121851
For more information visit
https://pavemg. com/m7bgzw
Caterpillar Updated Cold Planers
The 630-hp PM620 and PM622 half-lane cold planers have a Cat C18 Tier 4 Final engine, while the PM820, PM822 and PM825 have the same engine with a twinturbo setup to deliver 800.6 hp. • Weigh from 73,260 to 82,650 lbs. with cutting widths from 79 to 98.6 in. • Integrated Cat GRADE or can be enhanced with full 3D milling operation • Robust cutting system with heavy steel construction and reinforced alloys • High-capacity conveyors offer enhanced discharge control
www.ForConstructionPros.com/21415523
The 801-hp W 220 Fi and 1,010-hp W 250 Fi large milling machines have a maximum milling depth of 14 in., and can serve a wide range of applications. • Various drive concepts are available to ensure maximum and optimal milling performance • Mill Assist standard assistance system automatically controls the two-speed Dual
Shift powershift transmission when in automatic mode • In combination with the diesel engine, milling drum speeds can be increased or decreased to meet application demands • Wirtgen Performance Tracker (WPT) calculates precise surface milling performance, milling volume and consumption values and displays it on the operator's platform
www.ForConstructionPros. com/21108870
Roadtec RX-700 Cold Planer
The RX-700 heavy-duty cold planer offers balanced weight distribution and can cut up to 14 in. deep.
• Standard cut widths of 6 ft. 7 in., 7 ft. 2in., 8 ft. 2 in. and 10 ft. • Features a 60° front load-out conveyor swing • Dual control stations allow operation from either side • Automated Control of Elevation (ACE) grade control automates machine elevation through grade and slope sensors • Keyway steering with crab, coordinated, rear only and front only steering modes • 800-hp Caterpillar C18 six-cylinder,
Tier 4 Final diesel engine
www.ForConstructionPros. com/21759539
Wirtgen W 240 CR/W 240 CRi Cold Recycler
The helical design milling and mixing rotor transports mix to the center and then to the paving unit via the primary conveyor, where the spreading auger distributes it evenly in front of the variable paving screed to ensure paving istrue to line and level. • Suited for both the down-cut process (recycling) and up-cut process (milling) • Multiple Cutting System MCS EXTEND enables different working widths • Injection systems features adjustable injection pressure, process water monitoring and automatic self-cleaning and flushing feature • High-powered, high-torque diesel engine with intelligent engine-machine management system
