Material Transfer Vehicles

MTV’S

For more information visit

https://pavemg. com/svr5hy

Vögele MT 30002i Material Transfer Vehicle

Optimal performance in a new-design MTV for asphalt paving. • Unit weighs 56,000 lbs. and has an 18-ton storage capacity, making it heavy enough to get the job done but portable enough to haul with minimal hassles • Active remixing is achieved by two 16-in.-diameter conical augers in the receiving hopper • Auto feed function automatically slows or shuts down feeding when the hopper insert is filled • Heated scrapers keep the belts constantly clean • Propel system with auto distance control keeps the feeder at a preset distance from the paver • 215-hp Deutz Tier 4i engine

www.ForConstructionPros. com/12113037

Weiler E1650A Remixing Transfer Vehicle

The E1650A has an 18-ton onboard storage, enhanced elevator motors and triplepitch remix augers. • 600-tph discharge capacity for nonstop, non-contact paving with reduced particulate and thermal segregation • Front-mounted control station layout has a 10-in. color touchscreen display with integrated camera, plus proportional conveyor swing joystick control • Crab and coordinated rear steer with auto-center enables a 17-ft. inside turning radius • Includes storage hopper management system, paver hopper management system with distance to paver control and auto-center options

Roadtec MTV-1105e

The rubber track MTV-1105e transfers asphalt material from a truck to a paver for non-contact paving. • Tracks made for any environment. • Operator station gives exceptional visibility from the dump hopper across the low-profile design • Innovative staircase entrance instead of ladder allows the crew to cross over the machine, and over the paving line • Sized for mass discharge from standard haul trucks • Placed in the front dump hopper, the augers work to blend materials

www.ForConstructionPros.com/21102576

Dynapac MF2500CS Material Feeder Product Line

These units can handle a variety of material applications including asphalt, concrete, sand and base material. The SwingApp functionality can transform the unit into an offset feeder. • Can empty standard 35-ton truckload in 35 seconds • Fully automated with integration of distance control • Cummins QSB 6.7-C220 diesel engine • Operating speeds of 80 ft./minute

www.ForConstructionPros. com/20994988

Weiler E2850B Remixing Transfer Vehicle

Features 25 tons of onboard storage, triple-pitch remix augers and 600-tph discharge capacity for non-stop, noncontact paving. • Variable-speed elevator and conveyors allow chain speed to match production • Auto dump and dump assist features • Rear steer option provides an inside turning radius of 14 ft • 18-in. operator platform with conveniently located controls

www.ForConstructionPros. com/21047850

Weiler E2850C Remixing Transfer Vehicle

The E2850C features 25 tons of onboard storage, enhanced elevator motors and triple-pitch remix augers to provide 600tph discharge capacity for non-stop, non-contact paving with reduced particulate and thermal segregation. • The storage hopper management system with distance to paver control allow the operator to focus on truck exchanges & maintaining proper material feed to the paver.

www.ForConstructionPros.com/22043685

Roadtec SB-3000 Material Transfer Vehicle

The SB-3000 Shuttle Buggy Material Transfer Vehicle (MTV) offers 25 tons of storage in the main hopper and can hold more than 30 tons of material • Main operator positioned closer to paving action while maintaining optimal sight lines, with the ground • 310-hp Cummins, QSB6.7, Stage 5 engine with ground-level access • Adaptive cruise control allows a set distance between the MTV and paver to be automatically maintained.