6 minute read
Preservation Equipment
Sponsored By PRESERVATION EQUIPMENT
The Asphalt Road Preservation Package was designed for optimal efficiency and high-quality results. • Dual applicator for quick prep work and sealcoating around curbs and gutters • The DA 350 is a three-wheeled self-propelled sealcoating machine that features a built-in, highpowered blower and AutoTrim, an automatic cutting-in attachment.
These features allow contractors to complete prep work along curband-gutter streets as much as seven times faster than what can be achieved manually • Operators can use the machine’s heavy-duty diamond-shaped squeegee assembly to effectively apply sealcoat material into asphalt surface voids. • Features a generation IV pump that delivers infinitely variable outputs from 0-150 gpm
www.ForConstructionPros. com/21010006
KM International T-2 Asphalt Recycler
KM T-2 Asphalt Recycler enables contractors to have access to hot mix asphalt all year. • Produces 4 tons of
HMA an hour • Recycles millings, chunks and
RAP into plant quality HMA • 12-in load opening for asphalt material • 21HP Kubota diesel engine • Easy maintenance through access door on side
www.ForConstructionPros. com/20978624
Caterpillar RM400 Rotary Mixer
The 51,809-lb. RM400 rotary mixer features an 8-ft. cutting width and is powered by a 417-hp C9.3 Tier 4 Final engine. • Standard all-wheel drive utilizes four independent drive pumps for maximum torque, traction and speed • Three different rotor speeds help deliver the desired material gradation and the electronic controller keeps the rotor at the proper depth and machine at a consistent speed to ensure optimal blending performance • Four rotor options are available for a variety of applications
www.ForConstructionPros.com/21086837
Astec Industries Roadtec CIR Additive System
Used in the cold-in-place recycling of asphalt pavement in the repair and rehabilitation of asphalt-paved roads. • The system is used to transfer, measure and inject either emulsion or foamed asphalt to the cutter housing • Mounts to the rear of the milling machine, and is the same width as the mainframe
www.ForConstructionPros. com/20866975
Rayner PavementSaver III
The features of the PavementSaver III include a Control Area Network and an Autonomous Rate Control System. • 49HP Turbocharged diesel engine • HD squeegee assembly with hydraulic control • Variable speed direct drive hydraulic agitated mixer • Spray bar starts at 8-ft and can extend to 12-ft • Pressure sensing technology
www.ForConstructionPros. com/12301959
Etnyre Crack Sealer 250/400 Gallon
The speed of the heating and circulation systems results in less crew idle time, higher production and lower cost per shift. • Operator console is centrally located • Closed loop, flow controlled, hot oil system that is on a closed loop • 45-60 minutes heating time to circulate • Flush-free system
www.ForConstructionPros.com/21808894
BOMAG RS 500 Recycler/Stablizer
The 55,556-lb. RS 500 Recycler/Stablizer features a 510-hp Mercedes Benz engine and an offset rotor design with the capability of side-shifting to either side of the machine. • 88.5-in. rotor width, 197-in. maximum cutting depth and rec. speed of up to 164 fpm • Includes three infinitely variable gradation bars that can be adjusted to achieve the target material size • Standard quick-change BRS05 tooth holder • ROPS/FOPS operator’s cab offers comfortable, climate-controlled operation and is centrally positioned for all-around visibility
Pave the way to stronger roads.
Introducing Carbophalt® G from Simpson Strong-Tie — a reinforcement grid made of durable, high-tensile-strength carbon fiber that strengthens asphalt roads and highways. Unlike other asphalt reinforcement products, its open-grid design is fully saturated with bitumen, helping it form a powerful, long-lasting bond between asphalt layers. Our innovative grid distributes loads more evenly, increases load-bearing capacity and makes roads more resistant to cracks, potholes and rutting. Ideal for new construction or resurfacing, this grid is tested and proven to extend the service life of paved surfaces, delivering greater economic value over time. And, it’s easily milled and recycled, making it reusable and highly sustainable. Installation is fast and easy with our grid machine, which is available with complete training for operators.
Take asphalt performance further.
To learn more about Carbophalt G asphalt reinforcement grid, contact your Simpson Strong-Tie representative. Visit go.strongtie.com/asphalt or call (800) 999-5099.
Sponsored By PRESERVATION EQUIPMENT
N.I. Wilson Model X2 300 Self-Propelled Sealcoating Machine.
The X2 300 is a dual rear wheel drive unit powered by a 24-hp Honda engine. • 8-ft. hydraulic angle squeegee • 4-in. material valve • Large stainless steel water tank • Reversible agitation • 2-in. side dump valve • Hydraulic oil cooler
www.ForConstructionPros. com/21771937
Elgin RegenX1 Regenerative Air Sweeper
A customer-driven design, mid-dump regenerative air street sweeper that is easy to use, clean and maintain. • Single-engine, truck mounted regenerative air sweeper that eliminates the work of maintaining two engines • 56-in. roll-off container dump height with 50-degree dump angle and 8 yd3 hopper helps avoid double handling • Utilizes a highly efficient dust separator and large screen surface area to reduce carryover • Simplified design involves fewer moving parts helps increase uptime • No lengthy maintenance needs • Easily accessible components • Bolt-on wear parts were installed wherever possible for further ease.
www.ForConstructionPros. com/22223023
For more information visit
https://pavemg. com/gdxf5q
Roadtec SX-5e Stabilizer-Reclaimer
The Roadtec mid-size SX-5e stabilizer-reclaimer features a 513 hp Cummins QSG12 engine. • The SX-5e complies with Tier 4 Final and Stage IV emission standards • Weighing in at less than 58,000 lbs, the SX-5e is nimble yet powerful • A high torque hydrostatic cutter drive and multiple cutter speeds provide performance in both soil stabilization and asphalt reclamation • A climate controlled cab extends the width of the machine providing a comfortable work space and enhanced visibility
www.ForConstructionPros.com/21092531
Cimline Prepackaged Mastic Melter Applicator
Designed to be a way for operators to be able to apply mastic repairs to asphalt roadways and parking lots. • 350-gal tank • Adjustable hitch w/ 3-in pintle ring • Propane heated rear chute • Insulated tank and firing chamber • 340,000 BTU diesel material burner • Automatic temperature control • Overnight heating blanket • Easy to use controls, easy training
www.ForConstructionPros. com/21497353
Crafco Patcher II
The Patcher features digital controls to assure that mastic temperatures are held within specifications at all times. The Patcher has angled and staggered agitation blades which provide superior material agitation and aggregate suspension for a consistent material blend. • Diesel-powered • 6:1 gear box • Easy clean-out • Safety shut-off lid • Oil-jacked double boiler • Designed to handle an array of materials
www.ForConstructionPros. com/21722729
Bergkamp SP5E Pothole Patcher
With the SP5E, each repair takes just a few minutes, where traditional hot-mix patchers require much more time to complete a patch. Utilizing Bergkamp’s exclusive SPECS, units are equipped with a joystick and touchscreen display that provide full operator control • Truck-mounted and operated safely from inside the cab by just one operator • Asphalt repairs are handled from the front of the machine • SPECS monitors the front boom position, to help keep it in the safe operating zone • An automatic latching system allows the operator to secure the boom for safe travel • Lights, arrow boards, and camera options provide additional safety measures
www.ForConstructionPros.com/21389790
Weiler S200 Soil Stabilizer
The S200 soil stabilizer features either a soil or combination rear-mounted rotor powered by dual planetary drive motors with a 150-rpm maximum drum speed. • 78-in.-wide drum has a 14-in. maximum working depth • Automatic depth set point feature allows the operator to set the desired rotor depth and return to it with the push of a button on the joystick • The operator seat slides across the platform and rotates 357° for enhanced visibility
