PRESERVATION PRODUCTS Sponsored By
PRESERVATION EQUIPMENT
Neal Manufacturing Asphalt Road Preservation Package The Asphalt Road Preservation Package was designed for optimal efficiency and high-quality results. • Dual applicator for quick prep work and sealcoating around curbs and gutters • The DA 350 is a three-wheeled self-propelled sealcoating machine that features a built-in, highpowered blower and AutoTrim, an automatic cutting-in attachment. These features allow contractors to complete prep work along curband-gutter streets as much as seven times faster than what can be achieved manually • Operators can use the machine’s heavy-duty diamond-shaped squeegee assembly to effectively apply sealcoat material into asphalt surface voids. • Features a generation IV pump that delivers infinitely variable outputs from 0-150 gpm
Caterpillar RM400 Rotary Mixer The 51,809-lb. RM400 rotary mixer features an 8-ft. cutting width and is powered by a 417-hp C9.3 Tier 4 Final engine. • Standard all-wheel drive utilizes four independent drive pumps for maximum torque, traction and speed • Three different rotor speeds help deliver the desired material gradation and the electronic controller keeps the rotor at the proper depth and machine at a consistent speed to ensure optimal blending performance • Four rotor options are available for a variety of applications www.ForConstructionPros.com/21086837
Astec Industries Roadtec CIR Additive System Used in the cold-in-place recycling of asphalt pavement in the repair and rehabilitation of asphalt-paved roads. • The system is used to transfer, measure and inject either emulsion or foamed asphalt to the cutter housing • Mounts to the rear of the milling machine, and is the same width as the mainframe
The features of the PavementSaver III include a Control Area Network and an Autonomous Rate Control System. • 49HP Turbocharged diesel engine • HD squeegee assembly with hydraulic control • Variable speed direct drive hydraulic agitated mixer • Spray bar starts at 8-ft and can extend to 12-ft • Pressure sensing technology
www.ForConstructionPros. com/20866975
www.ForConstructionPros. com/12301959
www.ForConstructionPros. com/21010006
KM International T-2 Asphalt Recycler KM T-2 Asphalt Recycler enables contractors to have access to hot mix asphalt all year. • Produces 4 tons of HMA an hour • Recycles millings, chunks and RAP into plant quality HMA • 12-in load opening for asphalt material • 21HP Kubota diesel engine • Easy maintenance through access door on side www.ForConstructionPros. com/20978624
52
ASPHALT CONTRACTOR AUGUST 2022
Rayner PavementSaver III
Etnyre Crack Sealer 250/400 Gallon
• • • •
The speed of the heating and circulation systems results in less crew idle time, higher production and lower cost per shift. Operator console is centrally located Closed loop, flow controlled, hot oil system that is on a closed loop 45-60 minutes heating time to circulate Flush-free system
www.ForConstructionPros.com/21808894
BOMAG RS 500 Recycler/Stablizer The 55,556-lb. RS 500 Recycler/Stablizer features a 510-hp Mercedes Benz engine and an offset rotor design with the capability of side-shifting to either side of the machine. • 88.5-in. rotor width, 197-in. maximum cutting depth and rec. speed of up to 164 fpm • Includes three infinitely variable gradation bars that can be adjusted to achieve the target material size • Standard quick-change BRS05 tooth holder • ROPS/FOPS operator’s cab offers comfortable, climate-controlled operation and is centrally positioned for all-around visibility www.ForConstructionPros.com/12293017
www.ForConstructionPros.com/Asphalt
