PRESERVATION PRODUCTS MILLING MACHINES Wirtgen W 100 Fi, W 120 Fi and W 130 Fi Cold Mills Mid-sized cold mills feature a max milling depth of 13 in., and are powered by a Cummins 6-cylinder Tier 4i engine generating 320 hp. • Standard working widths of 39 in. (W 100 Fi), 47 in. (W 120 Fi) and 51 in. (W 130 Fi) with a frontloading system, all on a common platform • Front-loading conveyor enables swift and smooth loading of large quantities • WIDRIVE machine control system keeps the engine speed within the optimal range • Available as track-mounted or wheel-mounted models • Large steering lock to allow for narrow bends and flush-to-curb milling www.ForConstructionPros.com/12039394
Caterpillar PM825 Cold Planer Series has operating weights from 79,630 to 82,650 lb. and cutting widths from 79 to 98.6 in. • Three electronically controlled cutting settings • 755-hp Cat C18 ACERT Tier 4 Final engines iso-mounted to reduce vibration • Hydrostatic drive with two variabledisplacement propel pumps supplying a variable-displacement motor at each track • Automatic traction control system minimizes track slip in extreme conditions • Standard four-mode steering with electronic control module • Hydraulically controlled front loading conveyor www.ForConstructionPros. com/20980992
Roadtec Auto Cut Precision Milling Technology Auto Cut allows milling machine operators to easily raise the mill, walk over obstacles, walk back into the cut and resume milling at the same depth, without reprogramming or delay. • Easy to use, intuitive interface can be learned in minutes • Additional HMI switches mounted to the top of the ACE display box • Heavy-duty smart cylinders with independent sensors on each leg provide more precise depth measurements • Data continuously updated and displayed • Currently available on the RX-600e cold planer www.ForConstructionPros. com/20990543
BOMAG Ion Dust Shield The ION Dust Shield was specially developed for cold milling machines to transfer dust away from the operator and eliminate fine particles (PM 2.5, PM 10) by up to 80%. • In addition to visible dust, a considerable amount of particulate matter is also produced when removing an asphalt surface and the ION Dust Shield binds the fine particulate matter by electrically charging the particles • The particles clump permanently to harmless coarse dust and can be easily removed which leads to a reduction in particulate matter of over 80% - as confirmed by the IGF Institute for Hazardous Substances Research at the Ruhr University www.ForConstructionPros.com/21259817
www.ForConstructionPros.com/Asphalt
Sponsored By
RoadHog G5HD Heavy-duty Cold Planer The Generation 5 HD (G5HD) heavyduty cold planer for skid steers is equipped with a Fairfield 7HBX planetary coupled to a Sauer M44 piston motor. • Available in cutting widths of 18, 24, 30, 40 and 48 in. • Can achieve up to an 8-in. cutting depth for optimal base repair and stabilization work • 5-in. tooth clearance for reduced drag in cuts below 2.5 in. • Features include a 3/4-in. chassis and housing plate, 1.5-in. walled cutting drum and a durable front steel debris guard www.ForConstructionPros. com/21219716
Element Six MasterGrade GH Cutting Bit Element Six MasterGrade bits use ‘Nano-technology’ to enhance the cobalt binder matrix and optimize the bit’s toughness. These innovative carbides result in a versatile bit that offers greater wear resistance, improved tool life and increased operating efficiency. • Large carbide cap provides protection to steel body • Improved hardened washer for better wear and holder protection • Full sleeve retainer designed for superior holding www.ForConstructionPros. com/22314466
AUGUST 2022 ASPHALT CONTRACTOR
49
