Other

A Heavy-Duty Jib Extension For The Grove GRT9165 Rough-Terrain Crane For Precast Work Grove is offering a new heavy-duty jib extension for the Grove GRT9165 rough-terrain crane that increases the 165 USt (150 t) crane’s utilization abilities. It provides a competitive edge for setting precast concrete panels, as it’s easier to transport and faster to set up than competitive cranes for tilt-up work. Specs of the jib: • 12.5 ft (3.8 m) long • Designed with two sheaves, for up to four parts of line • Hydraulically offsettable from 0-50 degrees • Max lifting capacity of 68,600 lbs • The two-hook design gives operators tight precision when positioning panels • In-cab switch for faster operation and convenience

Fisher XRS Skid-steer Plow The XRS skid-steer plow leverages the onboard hydraulic system of the skid steer to lift and lower the blade for improved operator performance. • Standard oscillating mount provides 6° of side-to-side oscillation • Oscillation improves scraping and cutting edge wear while reducing damage to the terrain Aquajet Aqua Cutter 750V Hydrodemolition Robot The Aqua Cutter 750V cleans and descales rebar without causing microfracturing. It features Infinity oscillation that moves the water jet in a figure eight pattern, removing more concrete in a single pass while reducing shadowing, eliminating the risk of pipe holes and providing an efficient bonding surface.

Mueller HYMAX Pro Dedicated Size Coupling The HYMAX Pro dedicated size coupling is the newest addition to the HYMAX repair and installation portfolio for the North American market. This line of dedicated couplings, also known as flexible couplings, is engineered for new construction projects to provide a safe method for joining same-size plain-end pipes without the need for welding or special pipe fittings. Applicable to water and wastewater, irrigation and industrial markets, the HYMAX water and wastewater, irrigation and industrial markets, the HYMAX Pro dedicated size couplings are available from sizes 4 in. to 24 in. The Pro dedicated size couplings are available from sizes 4 in. to 24 in. The 4 in. to 10 in. sizes feature two-bolt, stab-fit construction. All couplings from this HYMAX Pro line conform to AWWA C219, NSF 61 and NSF 372 standards for drinking water system components. The 304SS stainless-steel fusion-bonded epoxy coated hardware and EPDM gasket are built into the standard product specifications of this line without additional cost. This provides corrosion resistance and affordability for all water utilities.

Sensata Develops Bluetooth Lowenergy Tire Pressure Monitoring Systems Sensata's new BLE TPMS leverages its tire pressure monitoring sensors by replacing the ultra-high frequency (UHF) radio with BLE radio to enable two-way communication. These new BLE TPMS solutions are available in both clamp-in and snap-in configurations, are optimized for battery life and deliver the same pressure, temperature and auto-location capabilities as Sensata’s existing UHF TPMS solutions. BLE TPMS technology supports vehicle safety, performance and the driving experience. The technology is designed for advanced driver assist systems (ADAS) and augment remote diagnostics support. With Over-the-Air updates, drivers can download new tire-related features and software updates, supporting their driving experience and avoiding a trip to the shop for service. Astec PTSC2818VM Portable High Frequency Screen Plant Astec’s PTSC plant is equipped with an 8-ft. x 18-ft. top deck and an 8-ft. x 12-ft. bottom deck. • Patent-pending screen design features externally-mounted vibrators at the ends of the tappets for a more aggressive screening action which creates a higher G-force and reduces heat load from material to motors as compared to single, center-mounted vibrators • Screen also allows for easier maintenance and adjustments and is equipped with hydraulic operating angle adjustment, a fines collection hopper, top- and bottom-deck discharge chutes and an aggregate spreader • Similar to other PTSC plants, the 2818VM features a nominal 54-in. x 38-ft. delivery conveyor with hydraulic drive and full-length skirtboards • Chassis is fitted with manually-operating support legs, outriggers for additional support

Read more at: https://eqtoday.co/attachments OTHER

Hilltip SweepAway Push Broom Attachments The new SweepAway push broom attachments from Hilltip are versatile clean-up solutions for use on forklifts, tractors, loaders, excavators and other vehicles. These tools provide reliable results when sweeping a variety of materials, such as leaves, sand, rocks, debris, snow and slush. Offered in multiple sizes from 59-in. to 118-in. wide, the SweepAway push brooms are available in a light series with eight brush rows or a medium series with 12 brush rows. Featuring polypropylene bristles, the replaceable brush rows can be changed and cleaned as needed. Additionally, the brooms contain no moving parts, resulting in practically no maintenance requirements. Optional accessories for the SweepAway push brooms include side brushes (leaf-stopper brushes), fastening straps, edge markers. Replacement brush rows available.

The Rhino Guardrail Pro Omni Adjustable Pile Driver The Rhino Guardrail Pro, Omni Adjustable Pile Driver is designed to expedite the installation of steel or wood posts and guardrails ranging from 2-in. round and up to 7 x 8 in. in size. Powerful hydraulics lift the hammer vertically to accommodate posts up to 8.5 ft. (2.6 meters) tall and align the hammer up to 10 degrees along the x and y axis to plumb posts accurately, regardless of jobsite topography. To maintain driving accuracy and efficiency, the Guardrail Pro Mast is fitted with two leveling indicators and offset controls allow the operator to maintain the sight line. The Guardrail Pro’s Adapter Plate and bottommounted guide keep the post secure and plumb while installing. A state-of-the-art hydraulic hammer, operating up to 1,000 bpm, delivers 800 ft.-lbs. (1,085 joule) of force to quickly install piles in all types of soils. The hammer’s mono-block design also reduces maintenance and extends the unit's life. Werk-Brau Skid Steer Angle Brooms The angle broom swings 30° left or right of center when cleaning and clearing snow, dirt, debris grass and more. Polypropylene brush with wire filaments support service life even in adverse conditions. Hydraulically driven brooms of 6-ft. or 7-ft. widths are powered by a single hydraulic motor capable of 10-22 gpm flow (standard), with dual hydraulic motors (20-44 gpm) or a low flow (8-16 gpm) motor available as options. A standard skid steer quick coupler and storage stand are provided for simple mounting, dismounting and storage. Broom speeds of up to 200 RPM are attainable, depending on the prime mover, making this angle broom applicable for skid steer loaders of various makes, models and sizes. The wafer style brush has 32-in. outside diameter (OD) x 10-in. inside diameter (ID). The brush core can be installed with either end to the left or right with no effect on sweeping performance, to simplify installation. Brush and core assembly can be removed from the frame without disconnecting drive motor hoses.