Earthmoving

MB Crusher MB-HDS523 Shafts Screener Bucket The MB-HDS523 is compatible with excavators ranging from 30- to 45-ton operating weights and features five shafts positioned to ensure a greater production rate and processing speed. • “V Shaft System" design creates a simultaneous dual screening effect • Concealed comb allows material to enter and flow through rotors without jamming • Powered by two motors for consistent and quick performance • Shafts can be easily switched out and replaced on site in minutes • Rotors can be easily extracted and repositioned Antraquip Rockwheel Attachments Carbide and diamond saw rockwheel attachments are available for excavators of all sizes and various applications. • Carbide rockwheels offer a cutting solution for soft to medium hard rock and concrete cutting applications with a minimum width of roughly 2 in. • Diamond saw rock wheels (AQD Series) cut the hardest rock including granite, basalt, etc., as well as reinforced concrete

Epiroc V Cutter With its V-shaped design, the latest drum cutter from Epiroc sets a new standard in trenching and quarrying. A seemingly simple solution with an extraordinary effectiveness, enabling energy savings of up to 40%. Thanks to the V-shaped design, that enables a cut with a flat base, no material is left untouched between the drums. Where a regular drum cutter must move side to side to create an even trench, an approach that causes extra wear on the carrier arm, the VC 2000 can reach the same result by just going straight. The distinguishing features of the classic Epiroc drum cutters, like the spur gears, adoptable high torque gear motor and the QuickSnap retaining system for fast and easy pick changing, are all to be found in the new VC 2000.

ASV Turf Tracks ASV offers smooth turf tracks for minimized damage to soft, delicate surfaces. With a combination of more ground surface area and the performance of ASV’s Posi-Track undercarriage, the turf tracks can achieve equal or better traction than treaded tracks on dry surfaces. This product minimizes damage to topsoil and root systems, allowing for faster job completion in landscape, hardscape and golf course applications. ASV’s green turf tracks have a smooth design and are manufactured from a specialized blend that resists cracking, provides traction and maximizes overall life. The rubber tracks eliminate rusting and corrosion because they contain no steel cords. Danuser Stump Auger

Danuser’s EP Auger System for backhoes, mini skid steers and excavators is compatible with Danuser’s Stump Auger, a standard 2-in. hex auger attachment that planes away stumps without requiring large, specialized equipment. A threaded, hardened steel pilot digs into the stump and large cutting blades then shave the stump away. The large cutting blades are reversible for more cutting life.

The stump auger is available in 10-in. and 16-in. diameters. The 10-in. model can run on auger units with 1,700 ft.-lbs. or more of torque and the 16-in. model can run on auger units with 3,000 ft.-lbs. or more of torque. Complete stump removal is achieved by overlapping planning locations.

Werk-Brau 6-yard Bucket These new buckets feature T1 and AR400 steel in critical wear areas for strength and durability, with weight saving features and is designed for use with John Deere 470P, PC490LC-11, Cat 349 and other 50-metric ton excavators. With 20% more capacity than a standard 5-yard bucket, the new heavy-duty highcapacity bucket can load a 30-yard haul truck in five passes. An effective dig angle allows the bucket to tear through virgin ground and materials. In addition, tapered side plates are engineered to reduce wear and allow for smoother dumping. The bucket can be equipped with a wide selection of industry standard ground engaging tools for durability.

Werk-Brau NOX Tiltrotators Werk-Brau's Nox tiltrotators for excavators. The attachment provides 360° of endless rotation with a tilt angle of 2 x 50°, allowing versatility with a wide range of attachments. These tools transform excavators into multi-functional carriers that work in deep trenches, under or between existing pipes and tubes and in other confined space applications. Designed for use with fork tines, grabs, grippers, buckets and more, this technology allows operators to complete projects without repositioning the carrier. A range of Werk-Brau NOX tiltrotators are available for excavators in various classes and categories, from 3-25 tons. With integrated hydraulics and no components protruding from the compact design, the risk of damaging hydraulic cylinders, hoses or other components is reduced on the jobsite. The product has minimal wear parts and only two fittings that require grease. Road Widener’s FH-R Material Placement Attachment Road Widener's FH-R material placement attachment has a remote-controlled design that allows the operator of the host machine to control the attachment via remote control, improving safety by eliminating the danger of additional workers standing along the jobsite. The FH-R is for material placement, dispensing topsoil, gravel, asphalt, limestone and more, with an attachment compatible with common machines that contractors already own. The remotecontrolled attachment easily connects to most skid steers, compact track loaders, road graders and wheel loaders, operating off the host machine’s engine and hydraulics.