Equipment Today March 2022

MARCH 2022

Helping you optimize ROI on your construction equipment

TO REIMAGINE YOUR CONSTRUCTION SITE

#1 Market Leaders

SHORTER-THAN-EXPECTED DPF SERVICE LIFE?

Ash from your engine oil is likely to blame

90

%

OF INCOMBUSTIBLES IN THE DPF COME FROM LUBRICANTS

Incombustible ash particles from today’s heavy-duty engine oils clog the diesel particulate filter (DPF) in Tier 4 Final aftertreatment systems, increasing maintenance costs and sidelining major equipment.

Now there’s a breakthrough solution.

Get the facts at DeloEmissionsControlCenter.com © 2021 Chevron. All rights reserved. All trademarks are property of Chevron Intellectual Property LLC or their respective owners.

DISCOVER Delo 600 ADF: Less ash. More service life.

Delo 600 ADF with OMNIMAX ™ Technology solves the issue of DPF ash buildup while providing outstanding engine protection. By producing 60% less ash compared to today’s low-ash engine oils, Delo 600 ADF extends DPF service life by 2.5X to keep heavy-duty equipment running stronger, longer.

Protect your engine and your aftertreatment system with Delo 600 ADF.

It’s time to kick some ash.

Contents

®

MARCH 2022 | www.ForConstructionPros.com

COVER STORY

Published by AC Business Media

© Avantgarde | Kirill Gorlov – stock.adobe.com

201 N. Main Street, 5th Floor Fort Atkinson, Wisconsin 53538 (800) 538-5544 www.ACBusinessMedia.com

Publication Staff Publisher Sean Dunphy, sdunphy@ACBusinessMedia.com Editor Becky Schultz, bschultz@ACBusinessMedia.com Senior Field Editor Curt Bennink, cbennink@ACBusinessMedia.com Contributing Writers Garry Bartecki,

Jessica Lombardo Art Director Dave Haglund Senior Production Manager Cindy Rusch Audience Development Manager Angela Franks

Advertising Sales (800) 538-5544 Sean Dunphy; Nikki Lawson; Kris Flitcroft; Tadashi Soma

ForConstructionPros.com Editor-in-Chief Wayne Grayson Editor Larry Stewart

AC Business Media

Find thousands of additional products in the NEW PRODUCT DIRECTORY at www.ForConstructionPros.com.

Chief Executive Officer.............. Ron Spink Chief Financial Officer............... JoAnn Breuchel

Chief Digital Officer.................. Kris Heineman Chief Revenue Officer............... Amy Schwandt VP Audience Development......... Ronda Hughes Director, Demand Generation & Education............................. Jim Bagan Vice President, Operations....... Nick Raether Content Director....................... Marina Mayer

Change of Address & Subscriptions PO Box 3605, Northbrook, IL 60065-3605, Phone: (877) 201-3915 • Fax: (847) 291-4816 circ.EquipmentToday@omeda.com

PRODUCTS 6

List Rental Bart Piccirillo, Sr. Account Manager, Data Axle Phone: (518) 339-4511 bart.piccirillo@data-axle.com

6

EARTHMOVING

Includes excavators, wheel loaders, backhoe-loaders, skid steers, compact track loaders and more.

Reprints Reprints — For reprints and licensing please contact Sean Dunphy at 920-542-1252 sdunphy@acbusinessmedia.com

20 ATTACHMENTS

Includes buckets, breakers, crushers, concrete drills, mulchers and more.

28 TRUCKS & TRANSPORTATION

20

Published and copyrighted 2022 by AC Business Media Equipment Today makes every effort to report manufacturers’ product news accurately, but is not responsible for validity of news claims.

28

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage or retrieval system, without written permission from the publisher.

Includes pickup and heavy-duty trucks, service bodies, trailers and more.

32 FLEET MANAGEMENT

38

Includes engines, components, fluids, service equipment and more.

Includes boom and scissor lifts, telehandlers and more.

42 ROAD BUILDING

Includes concrete and asphalt pavers, rollers and more.

One year subscription to non-qualified individuals: U.S. $50; Canada/Mexico $70; all other countries $100 (payable in U.S. funds, drawn on U.S. bank).

Single copies available (prepaid only) $10.00 each (U.S., Canada & Mexico), $15.00 each (International). For change of address or subscription information call (847) 559-7598 or fax (847) 291-4816. Equipment Today (USPS 369-290, ISSN 0891-141X) is published is published 12x with issues of January, February, March, April, May, June, July, August, September, October, November and December by AC Business Media, 201 N. Main Street, 5th Fl., Fort Atkinson, WI 53538. Periodicals postage paid at Fort Atkinson, WI, and additional entry offices. POSTMASTER: Please send change of address to Equipment Today, PO Box 3605, Northbrook, IL 60065-3605. Printed in the USA. Canada Post PM40612608. Return Undeliverable Canadian Addresses to: Equipment Today, PO Box 25542, London, ON N6C 6B2.

44 WORKSITE EQUIPMENT

4 EQUIPMEN T TODAY | March 2022

32 42

38 LIFT EQUIPMENT

Includes power sources, concrete equipment, technology products and more.

SUBSCRIPTION POLICY: Individual subscriptions are available without charge in the U.S. and Canada to management, engineering, supervisory, equipment maintenance and other personnel who have buying influence in the construction equipment industry.

Subscribe online at www.ForConstructionPros.com.

Publisher reserves the right to reject non-qualified subscribers.

Vol. 58 No. 3 March 2022

44 www.ForConstructionPros.com

The Worldwide Leader in Concrete Paving Technology

www.gomaco.com x info@gomaco.com GOMACO offers the full range of concrete slipform pavers, curb and gutter machines, trimmers, placer/spreaders, texture/cure machines and bridge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+® control system, created in-house by our software engineers from the wants and needs of contractors paving in the field. At the heart of GOMACO equipment is our passion for concrete and our commitment to our customers. We look forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs. Our worldwide distributor network and our corporate team always stand ready to serve and assist you.

CONCRETE STREETS AND HIGHWAYS x AIRPORT RUNWAYS x CURB AND GUTTER x SIDEWALKS RECREATIONAL TRAILS x SAFETY BARRIER x BRIDGE PARAPET x BRIDGE DECKS x IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA x 712-364-3347

EARTHMOVING Products

Caterpillar 415 to 430 Backhoe-loaders Mecalac Updated MCR Series Excavators The updated 6MCR, 8MCR and 10MCR crawler skid excavators provide the swiftness of a skid steer with the rotation of an excavator for versatility and enhanced travel speeds.

• Combine a three-part arm and rotating ability to deliver 360° capability • Arm can be tucked in even with a full bucket for a true zero turn radius • Feature a hydrostatic transmission and drive motors with a dedicated pump to drive the motor • Capable of travel speeds up to 6.2 mph • CONNECT quick-coupler system allows operators to quickly transition between attachments without leaving the cab

www.forconstructionpros.com/21136452

The 415, 416, 420, 420 XE and 430 are powered by 70- to 107-net-hp Cat C3.6 Tier 4 Final engines.

• Operating weights from 15,246 to 22,355 lbs. with loader lift capacities from 6,730 to 7,230 lbs. and max dig depths from 14 ft. to 15 ft. 2 in.

• 420 XE offers up to 15% more boom lift capacity as well as seat controls that enable Dual mode capability for more efficient machine repositioning • Electronic loader controls on 420 XE enable selectable parallel lift, programmable loader kickout and returnto-dig on an LCD touchscreen display • Selectable power management modes on 420, 420 XE and 430 offer the choice of Standard Mode or Standard Plus Mode to maximize backhoe implement speeds

www.forconstructionpros.com/21120655

Hyundai HL930A Wheel Loader The HL930A is sized to meet the needs of utility and general construction contractors, with the HL930A XT offering a 25,595-lb. operating weight and 2.5-cu.-yd. standard bucket capacity.

• 130-net-hp Cummins B4.5 Performance Series Stage V-certified diesel engine with Engine Connected Diagnostics • Enhanced onboard weighing system with automatic/manual cumulative weighing function • Eco Report analyzes loader operation status based on operator performance • Smart Power Mode reduces fuel consumption • HiDETECT system with radar detects rear obstacles (day and night) without blindspots and reports status of nearby moving or stationary objects

www.forconstructionpros.com/21123278

Wacker Neuson ET42 Excavator The 4.2-ton ET42 has a revised lowprofile hood design and side window glass expanded down to the lower portion of the cab to provide added visibility to the front of both tracks.

• Large windows and offset boom provide a complete view of the boom, attachment and working area • Three-point bucket linkage and 200° angle of rotation combine optimal breakout force with a greater range of motion and vertical digging depth • Dual flange rollers in undercarriage improve stability and provide a smoother ride with less vibration • Comes in cab or canopy with LED working lights and optional angle blade or Vertical Digging System (VDS)

www.forconstructionpros.com/21123349

Ranko Venieri VF5.63C Loader The Venieri VF5.63C articulated loader has a Deutz four-cylinder engine and boasts an 8,598-lb. lift capacity, 14,100-lb. breakout force and a static tipping load at full turn of 9,700 lbs.

• Maximum weight of 13,820 lbs.

• Features “Z” Kinematics, a rear oscillating axle, hydrostatic transmission and four-wheel drive • Enclosed cab offers 360° visibility, ergonomic seating, detailed LCD dash screen and accessible controls for operator efficiency and safety

www.forconstructionpros.com/21028972

Kato HD512LC-7 and HD514MR-7 Hydraulic Excavators The 28,429-lb. HD512LC-7 standard radius and 31,085-lb. HD514MR-7 mini radius excavators feature REGZAM 7th generation technology.

• Maximum digging depths of 18 ft. 4 in. and 18 ft. 2 in. and maximum reach of 27 ft. 3 in. and 27 ft. 9 in.

• Bucket digging force of 21,123 lbs. or up to 22,031 lbs. at high power • 105-hp Isuzu Tier 4 Final diesel engine and 73-gal. fuel tank • Quick-response four-pump hydraulic system with dual auxiliary hydraulics • ROPS/TOPS/FOPS pressurized cabin offers centralized switches, a 7-in.

LCD color touchscreen monitor with standard side and rear camera feature and retractable windshield

www.forconstructionpros.com/21135896

6

EQUIPMEN T TODAY | March 2022

Takeuchi TL10V2 Compact Track Loader

Gehl 650 and 750 Articulated Wheel Loaders

The TL10V2 has a tipping load of 7,205 lbs., bucket breakout force of 6,520 lbs. and lift arm breakout force of 5,400 lbs.

• Vertical lift design enables a maximum hinge pin height of 10 ft. 4.8 in. and dump height fully raised of 7 ft. 11.9 in.

• Kubota 3.3-liter, Tier 4 Final engine rated at 74.3 hp and 195 ft.-lbs. of torque • Standard Active Power Control automatically maintains engine power and keeps engine within its optimal range • Fully redesigned operator’s station with 5.7-in. color multi-informational display and precision pilot controls • Updated undercarriage with wide block quiet ride track system provides better flotation and ride quality and reduced noise and vibration

The 9,080-lb. 650 and 10,920-lb. 750 feature larger engines, higher horsepower, a digital instrumentation display, PowerA-Tach attachment mounting system and a multi-function joystick.

• 64.4-hp Yanmar (650) and 74.3-hp Deutz (750) Tier 4-certified engines • Provide 6,409- to 7,907-lb. straight tipping loads with the bucket and up to 130.5- (650) and 136.8-in. (750) bucket hinge pin heights • Z-bar-type linkage allows for mechanical self-leveling action, optimal bucket dump angles, mechanical return-to-dig and greater forward reach • Articulated steering with up to 45° turning angles • Travel speeds up to 19 mph

www.forconstructionpros.com/21125583

www.forconstructionpros.com/12207292

www.ForConstructionPros.com

Case Enhanced G Series Wheel Loaders The G Series wheel loaders now include a Smart Power Mode that improves communication between the engine and transmission based on workload.

• Touchscreen display provides tablet-like performance for accessing all critical machine settings and operational data • Adjustable electrohydraulic controls allow operator to independently set lift (boom) and tilt (bucket) responsiveness to match preference and loading situations • Electrohydraulic parallel lift functionality • Payload system integrated directly into primary display to provide bucket weight, pass counts, accumulated/running weight, job tracking data and more

www.forconstructionpros.com/12291465

AN EXCAVATOR THAT SIDE HUSTLES AS AN AUGER, A GRAPPLE, AND A HAMMER.

NEVER IDLE Whether it’s getting in where big iron can’t or going it alone, our compact excavators are models of efficiency. Thanks to countless attachments to tackle whatever the task at hand, and engcon compatibility for even greater productivity. All backed by our tried-and-true dealer network, to keep your compact workhorse punching above its weight.

DEERE.COM/EXCAVATORS

EARTHMOVING Products

Volvo ECR25 Electric Excavator The ECR25 is fitted with lithium-ion batteries and one electric motor that powers the hydraulics.

• Generates zero exhaust emissions and lower noise levels, reduces energy costs, improves efficiency and has fewer maintenance requirements • Provides a digging depth of 9 ft. and breakout force of 5,020 lbf.

• Batteries store enough electric energy to power machine for up to eight hours in its most common applications • Onboard chargers enable overnight charging adaptable to conventional household electrical systems, or offboard fast charger can be used with a three-phase outlet to achieve 80% power within one hour

www.forconstructionpros.com/21198046

Liebherr L 550 and L 556 XPower Wheel Loaders The 222-hp L 550 XPower has a 40,896lb. operating weight, a 27,558-lb. tip load and a 4.45-cu.-yd. bucket capacity, while the 249-hp L 556 weighs 43,210 lbs. and has a 30,314-lb. tip load and 4.8-cu.-yd. bucket capacity.

• Power-split travel drive increases engine power • Increased hydraulic performance enables dynamic lift and tip functions • Structural modifications to lift arms enable higher breakout, holding and retrieval forces • LIKUFIX quick-coupler system available • Available active personnel detection at the rear with a braking assistant

www.forconstructionpros.com/21343014

Caterpillar D4 Dozer The 29,259-lb., 130-net-hp D4 hydrostatic dozer has improved sight lines, a more comfortable seat and a 10-in. touchscreen main display with High Definition rear view camera.

• 4.26- to 4.98-cu.-yd. blade capacity • Standard Slope Indicate, Stable Blade and Traction Control with ability to add Cat Grade with Slope Assist and Factory Attachment Ready Option • Optional factory integrated Cat Grade with 3D with intuitive 10-in. Grade operator interface and AutoCarry • Standard or Low Ground Pressure (LGP) configurations with Variable Pitch Angle Tilt (VPAT) blade or optional foldable VPAT blade

www.forconstructionpros.com/21551363

Wacker Neuson WL28 Articulated Wheel Loader The 3-ton, .5-cu.-yd. WL28 has a compact design with minimized tailswing and optimized steering angle that allows navigation in tight spaces.

• 45- or 54-hp Yanmar Stage V engine with efficient regeneration system • Electronic regulated drive system provides improved pushing power, speeds up to 18.6 mph and an electronic parking brake with hill-hold function • Standard auto/eco mode and optional attachment mode • Cab offers increased space, improved ergonomics with intuitive controls, air conditioning and increased visibility

www.forconstructionpros.com/21808640

Kato CL35 Compact Track Loader

SANY SY215C Excavator The SY215C excavator is powered by a Cummins Tier 4 Final engine and features two circuits of auxiliary lines down the arm for ready to use hydraulic power.

• Side frame rails standard • Optimized cabin for visibility and operator comfort • SANYLive telematics GPS system keeps track of engine hours, fuel usage, location history, alerts and events

www.forconstructionpros.com/12293819

The CL35 has a rated operating capacity of 2,458.2 lbs. (50% tipping load).

• 62-hp Kubota V2403 engine • Offers a 6,475-lb. breakout force, 7-ft. 9-in. dump height and 38° dump angle • 5.6-psi minimum ground pressure • Comes in open canopy or fully enclosed cabin with heat and A/C • Comfortable interior with adjustable seat and easy to operate pilot controls • Rubber inner running surface of tracks reduces roller wear from contact with core metal while minimizing vibration and noise

www.forconstructionpros.com/10079761

Kobelco Next-generation SK55SRX-7 Compact Excavator The short radius SK55SRX-7 follows the Performance X Design concept for enhanced design and operator comfort.

• 11,817 lbs. with standard counterweight and canopy or 12,147 lbs. with cab • Max digging depth of 12 ft. 9 in. with standard 5-ft. 7-in. arm • 37-hp Yanmar Tier 4 Final diesel engine • Standard Energy Conservation mode and auto-deceleration switch • Improved hydraulic system shortens digging cycle time and redesigned travel motors increase travel and hill climbing speeds • Two-way dozer blade with float or optional four-way dozer blade with float

www.forconstructionpros.com/22018527

8 EQUIPMEN T TODAY | March 2022

Case Enhanced N Series Backhoe-loaders The N Series includes five models with ProControl, a swing dampening system that eliminates rebound on the backhoe.

• Backhoe dig depths from 14 ft. 4 in. to 15 ft. 5 in. with breakout force from 11,517 to 15,853 lbs.

• Engine ECO Mode encompasses features that include ECO settings in both loader and backhoe functions to provide up to 10% fuel savings with minimal loss in productivity • Auto engine idle and auto shutdown • Drivetrain provides improved roading and gradeability, as well as more pushing power under load and greater acceleration

www.forconstructionpros.com/10175793

Doosan Next-generation Mini-excavators The 6,168-lb. DX272-7, 8,807-lb.

DX35Z-7 and 12,121-lb. DX50Z-7 zero tailswing mini-excavators come with DoosanCONNECT Telematics.

• Provide maximum digging depths from 8 ft. 8 in. to 11 ft. 5 in.

• DX27Z-7 includes a rear view camera, 3-ft. 7-in. standard thumb-ready arm and an 11.8-in. rubber track undercarriage • DX35Z-7 has a large auxiliary hydraulic flow, wider enclosed cabin, LED lamp and 5.7-in. full-color LCD monitor • DX50Z-7 has a standard enclosed cab with heat and A/C with optional heated adjustable seat and steel tracks

www.forconstructionpros.com/21952801

www.ForConstructionPros.com

Sunward Full-size Excavator Line The company’s largest excavator models include the 15.6-ton SWE155F, the 24-ton SWE215F and 38-ton SWE365F. • 121-hp SWE155F features a Cummins Tier 4 Final engine, Japanese‑made hydraulic system that enables a 22,480lb. max bucket breakout and a durable design • 173-hp SWE215F powered by a Cummins engine that enables it to generate over 34,800 lbs. of digging force • 338-hp SWE365F features a dig depth of 24 ft. 6 in. and max bucket digging force of 56,202 lbf.

www.forconstructionpros.com/21940215

Engineered to do more www.liebherr.com

Earthmoving machines

Liebherr USA Co. • Construction Equipment Division • 4800 Chestnut Avenue • Newport News, VA 23607 • Phone +1 757 240 4250 Construction.USA@liebherr.com • www.facebook.com/LiebherrConstruction • www.liebherr.us/dealers-emt • www.liebherr.com

E A RTHM OV I N G Products

LiuGong 9027F Zero Tailswing Compact Excavator The 2.7-metric-ton 9027F has a Yanmar 20.4-net-hp Tier 4 Final engine, inline hydraulic pumps and main control valve.

• Standard bucket capacity of .065 cu. yds. with a bucket breakout force of 4,496 lbf.

• 9-ft. 4-in. maximum digging depth and 10-ft. 1-in. maximum dump height • Load-sensitive hydraulic system with 23.8-gpm main pump displacement • Hydraulic control for travel, boom swing, arm and bucket machine functions engaged via travel pedals and joysticks • Available in a climate-controlled ROPS cab or open canopy design with tip-over protection (TOPS) • Standard hydraulic thumb

John Deere SmartGrade 470G LC Excavator The 470G LC is now offered with factory-installed grade management solutions, including SmartGrade, SmartGrade-Ready with 2D, 3D Grade Guidance and 2D Grade Guidance.

• Cab includes a refined monitor with turn-and-tap rotary control; premium high-back, thermal heat and actively cooled, three-way adjustable leather seat; single-pedal hydraulic propel system and standard multi-language LCD monitor • Powerwise Plus hydraulic management system delivers on-demand hydraulic power when needed and offers precise pump control • Precision technologies include Virtual Front, Over-dig Protect, Virtual Ceiling, Virtual Floor, Virtual Swing and Virtual Wall

www.forconstructionpros.com/21940186

www.forconstructionpros.com/21940210

Bobcat T7X All-electric Compact Track Loader

Yanmar Compact Wheel Loaders

The all-electric T7X features battery power with electric actuation and propulsion that completely eliminates the traditional hydraulic system and components.

• 62-kW lithium-ion battery can support common daily work operations with each charge • Intelligent work modes enable up to four hours of continuous operation and a full day of operation during intermittent use • Provides instantaneous power and peak torque at every operating speed • Currently available all-electric attachments include an auger, angle broom and grapple

The V4-7, V8, V10 and V12 range in operating weights from 8,422 to 15,432 lbs., offer bucket capacities from .65 to 2.35 cu. yds. and have lift capacities of 7,451 to 15,962 lbf.

• V4-7, V8 and V10 powered by a Yanmar electronically controlled, Tier 4 Final diesel engine, while the V12 has a Deutz Tier 4 Final-compliant engine • Travel speeds range from 11.8 to 22 mph • Include intuitive multifunction joysticks plus a fixed travel speed mode, fully automatic accelerator mode and auxiliary hydraulics with proportional control • Oscillating rear axle securely transmits traction force to uneven ground • Hydraulic quick couplers

www.forconstructionpros.com/21977477

www.forconstructionpros.com/22031239

Doosan DL280-7 Wheel Loader Part of the -7 Series, the 34,552-lb. DL280-7 wheel loader features a redesigned cab with enhanced comfort features, increased bucket capacity and fuel-saving technologies.

• 189-hp engine • 3.7-cu.-yd. bucket capacity • Dump height of 9 ft. 3 in. with a hinge pin height of 12 ft. 11 in.

• Static tip load (straight) of 27,064 lbs.

www.forconstructionpros.com/22031176

10 EQU IPMEN T TOD AY | March 2022

Liebherr R 938 Excavator The 85,770-lb. R 938 is powered by a 299-hp Tier 4 Final diesel engine and has a 24-ft. 11-in. maximum dig depth and up to 53,510 lbs. of breakout force.

• Available with X-shaped, lubricated-forlife undercarriage and track rollers • Spacious, temperature-controlled cab features pneumatic seats, a highresolution 7-in. touchscreen and a windshield that can be fully lowered • Unobstructed panoramic cab view and rear and side monitoring cameras • Engine oil, hydraulic oil, fuel and urea levels monitored via the touchscreen • Various lighting packages available including an LED+ lighting option

www.forconstructionpros.com/21124649

Caterpillar 340 UHD Demolition Excavator This Ultra High Demolition excavator has a unique coupling system that allows for switching between two UHD fronts and Retrofit booms and sticks with no special tools in 15 minutes.

• 72-ft. 2-in. or 82-ft. front capable of handling 8,160- and 7,280-lb. maximum weights at stick pin, respectively • Choice of one- or two-piece boom options and stick options in 9-ft. 2-in., 10-ft. 6-in. and 12-ft. 10-in. lengths • 311-hp C9.3B Tier 4 Final engine • 30° tilt-up cab with Falling Object Guard Structure (FOGS), front and roof P5A, 0.4-in. laminated glass and standard rear view and side view cameras • Active stability monitoring system

www.forconstructionpros.com/21940166

ASV Repowered RT-40 Posi-Track Compact Track Loader The RT-40 Posi-Track now features a 38.2-hp Yanmar three-cylinder, Tier 4 diesel engine that delivers a power boost over the previous version.

• Offers a 48.3-in. width, 8.4-ft. lift height, 931-lb. rated operating capacity and 7.1mph top speed • Idler wheels’ full-metal-face seal package increases rated operating capacity to 1,008 lbs.

• Variable auxiliary hydraulic flow with a 13.3-gpm pump capacity and 3,000 psi • Tall, pressurized cab offers easier entry/ exit, a single-sided lap bar, partially adjustable armrests, 4.3-in. color display and standard hydraulic joystick controls

www.forconstructionpros.com/21940294

Takeuchi TB370 Compact Hydraulic Excavator The 14,793-lb. TB370 has a 56.8-hp Kubota V2607-CR-TE5B turbocharged, Tier 4 Final diesel engine with 157 ft.lbs. of torque.

• Dig depth of 13 ft. 4.8 in., maximum reach of 21 ft. 11.3 in. and bucket breakout force of 14,613 lbs.

• Spacious cab with automotive-styled interior, 8-in. color LCD multifunction touchscreen display, jog dial and onetouch controls • Takeuchi Fleet Management (TFM) telematics system • Three standard auxiliary circuits including a high-flow primary circuit • Load-sensing hydraulic system provides over 31 gpm of auxiliary hydraulic flow

www.forconstructionpros.com/21195442

JCB 50Z-1 Compact Excavator The 50Z-1 zero tailswing compact excavator replaces the 48Z in the range and provides a 12-ft. 7-in. dig depth, 19-ft. 8-in. ground level reach and a dump height of 14 ft.

• 43.3-gross-hp engine • 100% steel body work and 100% bushed dig end • Livelink telematics • Offers 500-hour greasing intervals, easy to access service panels and sectioned hydraulic hoses with easily accessible bulkhead

www.forconstructionpros.com/22031214

www.ForConstructionPros.com

E A RTHM OV I N G Products

John Deere G-Series Loaders The 312GR, 314G, 316GR and 318G skid steers and 317G compact track loader feature an optimized boom design that provides lifting heights over 10 ft. on vertical lift models (314G, 317G, 318G) and a 21% increase in breakout forces on radial lift models (312GR, 316GR).

• 1,550- to 2,124-lb. rated operating capacities • 51- to 65-hp Yanmar Tier 4 Final engines and hydraulic powertrains • 316GR, 318G and 317G offer 24% more engine power and all models provide 11% additional fuel capacity • 316GR and 318G feature two-speed, air conditioning, electrohydraulic joystick controls, enhanced lighting package and self-level and ride control combination with shock-absorbing boom cylinders

www.forconstructionpros.com/12165996

Liebherr PR 736 Generation 8 Hydrostatic Drive Dozer The 56,218-lb. PR 736 G8 has a 217bhp Liebherr Tier 4 Final diesel engine with Eco mode.

• Straight, semi-U and six-way blade options available in capacities from 5.36 to 7.27 cu. yds.

• Electronically pilot-controlled work hydraulics for swift, precise work cycles • OAS – Operator Assistance System offers a “Free Grade” level for active blade stabilization during fine grading, “Definition Grade” level for automatic blade positioning when creating 2D grades and “3D Grade” option to model complex terrain shapes • Roof-mounted GPS/GNSS antennas standard along with onboard Active Sensor Control to stabilize all blade axis

Sany SW405K Wheel Loader The SW405K has an operating weight of 40,786 lbs., a full-turn tipping load of 28,881 lbs. and is powered by a 252-net-hp Deutz TCD 7.8 four-cycle, turbocharged, electronic-controlled diesel engine.

• Z-bar linkage design delivers nearly 40,000 lbs. of breakout force • Comes with a 4.2-cu.-yd. bucket capacity and has a 123-in. maximum dump height • High-pressure, load-sensitive hydraulics offer a 10% to 15% reduction in energy usage • Features a boom suspension system, bucket self-leveling, return-to-dig and automatic transmission kickdown

Gehl M100 Minimal Tail Excavator The 21,550-lb. M100 is the largest model in the company’s excavator line, with a dig depth of 14 ft. 10 in. and a bucket breakout of 12,216 lbf.

• Robust mono boom design will go 60° in either direction for consistent digging without the need to reposition the machine • 72-hp (gross) 4TNV98CT-VBV diesel engine • 16-ft. 10-in. dump height and ground level reach of 24 ft. 3 in.

• Tailswing radius of 4 ft. 4 in.

• “Power-A-Tach” quick-attach system

www.forconstructionpros.com/20862583

www.forconstructionpros.com/21045807

www.forconstructionpros.com/21063560

JCB 2TS-7T Teleskid Hitachi ZW100-6 Wheel Loader Volvo L60H, L70H and L90H 2.0 Wheel Loaders The L60H and L70H wheel loaders offer improved fuel efficiency and enhanced productivity features.

• Tipping load increased by 1.7% for the L60H, 1.6% for the L70H and 3.4% for the L90H and dump height increased 3 in. for the L90H • Lockup torque converter (L70H to L90H option) lowers rpm and increases speed for faster cycles times • Smart Control function ensures correct torque in all situations, while Rim Pull Control reduces wheel spin and slippage • Electro-servo hydraulic controls (L70H and L90H) • Optimized design of the loader arm results in increased payload

www.forconstructionpros.com/21018916

New Holland C362 Compact Track Loader The C362 features 114 gross hp, a rated operating capacity of 6,200 lbs. and a breakout force of 12,900 lbs.

• Frame design incorporates a heavy-duty steel rear door and rear hood • In-cab 8-in. LCD display with EZ EH custom screen settings • Electrohydraulic controls feature multiple speed and sensitivity settings • Full 360° visibility with low-profile Super Boom arm and shoulder design, integrated rear camera and LED front work lights • Low-profile undercarriage design with steel-embedded tracks rolling on rubber

www.forconstructionpros.com/21784383

Toro Dingo TX 700 The Dingo TX 700 compact utility loader has a compact size and a 700-lb. rated operating capacity suited for working in tight spaces.

• Features traction controls and a dedicated stand-on platform • User-friendly with intuitive operation • Compatible with dozens of attachments • Available narrow track configuration or wide tracks with the Camso track system featuring a less aggressive tread pattern for sensitive surfaces

The ZW100-6 has an operating weight of 17,042 lbs., a bucket capacity of 1.4 cu. yds. and a 101-hp Tier 4 Final DPF-free engine.

• Hydrostatic transmission control system • Oscillating rear axle provides more stability and traction • Traction control system helps avoid tire slippage when working in sensitive ground conditions • Cab offers 360° panoramic visibility, an optional rear view camera, improved sound insulation and several storage compartments • Updated heavy-duty axles, a heavy center pin and robust box frame enhance machine durability

www.forconstructionpros.com/21771962

www.forconstructionpros.com/21116215

Link-Belt 210 X4 HD, 250 X4 HD and 300 X4 HD Excavators The 210 X4 HD, 250 X4 HD and 300 X4 HD come factory equipped with a high-wide and heavy-duty undercarriage with larger components for added durability, strength and performance.

• Feature an 11% to 17% wider stance and 40% to 50% higher ground clearance for enhanced stability and increased lift capacities • Traveling performance improved with up to a 30% increase in drawbar pull • HD attachments feature a high lift bracket for a greater working range and added lift capacities • Isuzu Tier 4 Final engines deliver more power and low fuel/DEF consumption without the use of a DPF

www.forconstructionpros.com/21977497

www.forconstructionpros.com/21796368

12 EQU IPMEN T TODAY | March 2022

The 9,914-lb. 2TS-7T Teleskid is built on a small-platform skid-steer chassis that allows it to deliver the lift height, forward reach and digging benefits of the 3TS-8T and 3TS-8W in a more compact, easily transportable platform.

• Rated operating capacity of 2,096 lbs. with the Powerboom retracted and 1,140 lbs. with the boom fully extended • Offers a maximum lift height of 11 ft. 10 in., forward reach of 7 ft. and the ability to dig 2 ft. below grade • Smoothride System allows for greater load retention and operator comfort • 74-hp JCB by Kohler Tier 4 Final engine does not require diesel exhaust fluid, a DPF or other exhaust aftertreatment • Standard hydraulic flow rate of 18.6 gpm or optional high-flow rate of 29.4 gpm

www.ForConstructionPros.com

WHAT DO YOU NEED TO DO TODAY?

When digging is on your to-do list, Wacker Neuson is ready for action. From excavators with best-in-class breakout force to powerful skid steers and compact track loaders, and even a ground-engaging telehandler, we have the equipment you need to really dig into the task at hand.

Looking for ground-breaking solutions? Check it off your list with Wacker Neuson.

Contact us today.

www.wackerneuson.com

E A RTHM OV I N G Products Bobcat R2-Series Excavator Line

Vermeer CTX160 Mini Skid Steer The CTX160 has a lift capacity of 1,600 lbs., a hinge pin height of 88.75 in. and pushes the load further away from the machine for dumping into a truck.

• Includes a 40-hp Kohler diesel engine and pilot-operated ground drive • Multifunctional display allows operator to continuously monitor machine readouts and diagnostics • Platform with operator presence system suspends ground drive and attachment motion if the user steps off the machine • Universal mounting plate and dual auxiliary hydraulic control enable use of a variety of attachments

www.forconstructionpros.com/21095484

Ditch Witch SK3000 Stand-on Skid Steer The 7,600-lb. SK3000 full-sized stand-on skid steer has an open, standing operator station with a 332-sq.-in. platform that provides a 360° view of the jobsite.

• Operating capacity of 3,100 lbs. and 5,500 lbs. of breakout force • Directs up to 51 hp to the attachment for efficient and productive use of hydraulic attachments • Advanced hydraulic system comes with 8-, 14- and 22-gpm flow settings to match flow to the job • Hydraulic-operated pins simplify attachment changes • Optional automatic ride control and dual self-leveling kit

www.forconstructionpros.com/21097609

The 25-hp E32, 25-hp E35 and 33-hp E35 have 7,403-, 7,659- and 7,893-lb. operating weights and dig depths of 121.2 in.

• E35 includes a 33-hp Bobcat engine • Low-effort joysticks and hydraulic control valve offer improved metering, movement and controllability • Advanced hydraulic controls allow operators to seamlessly swing boom while operating an attachment without sacrificing power • Spacious cab with control pattern selector under seat, optional automatic heating and A/C, optional high-back and heated seat with headrest and optional 7-in. touch display

www.forconstructionpros.com/21796968

Komatsu WA475-10 Wheel Loader The 56,240-lb. WA475-10 combines a 290hp SAA60125E-7 Tier 4 Final diesel engine and a Komatsu Hydraulic Mechanical Transmission that enable up to a 30% increase in fuel efficiency.

• Provides up to 44,332 lbs. of breakout force and up to a 45,283-lb. static tipping load • Independent Work Equipment Control simplifies operation and reduces fuel consumption by separating the accelerator pedal from work equipment speed • Boom lift force increased by 20% and breakout force improved by 8% • Auto hill holding function enables unit to remain stationary on slope without using brakes

www.forconstructionpros.com/21122084

Case M Series Crawler Dozers

John Deere Updated 950K and 1050K Dozers The updated 950K and 1050K dozers offer an Extended Life undercarriage option with SC-2-coated track chain bushings that deliver up to twice the wear life of standard bushings.

• Exterior hoses upgraded for improved flexibility and extended durability in cold-weather environments • Suspended double-bogie track frame on 1050K provides a second layer of bogies, new isolators and refined geometry to increase durability and ensure a smoother ride • 1050K Semi-U blade includes a more productive profile for increased capacity with improved roll performance and standard cast end bits • 950K stockpiling configuration available

www.forconstructionpros.com/21614834

Takeuchi TW65 SERIES 2 and TW80 SERIES 2 Compact Loaders The TW65 SERIES 2 and TW80 SERIES 2 offer 11,354- and 12,700-lb. operating weights, 4,050- and 4,445-lb. rated operating capacities and 11,600 and 13,960 lbs. of bucket breakout force.

• Reach and dump heights up to 8 ft. 6 in.

• 73-hp Deutz turbocharged, water-cooled, Tier 4 Final engine with a maximum torque of 192 ft.-lbs. at 1,800 rpm • Standard travel speed of 12.4 mph, or up to 24.8 mph using the high-speed road gear option and ride control accumulator • Improved cab with automotive-styled interior design, a frameless door, easy to operate function switches, inching pedal and precision pilot controls

www.forconstructionpros.com/12001140

The M Series dozers range from the 68-nethp 650M to the 214-net-hp 2050M, offering operating weights from 16,405 to 45,398 lbs., blade capacities from 2 to 7.29 cu. yds. and maximum drawbar pull from 39,086 to 80,979 lbs.

• FPT Tier 4 Final engines and hydrostatic transmissions • Soft, medium and aggressive reversing and steering mode settings • 750M to 2050M available with factory installed and calibrated Leica Geosystems 2D, dual mast 3D and SiteControl CoPilot precision construction solutions

www.forconstructionpros.com/10920461

Kubota U48-5 Compact Excavator The U48-5 tight tailswing compact excavator has an 11,057-lb. operating weight, 40.4 gross hp and a maximum digging depth of 10 ft. 8 in.

• Bucket breakout force of 9,304 lbs.

• Offers a full-digital, full-color, 7-in. LCD screen with intuitive jog dial for single glance access to various functions • Optional keyless start available • Features a larger, redesigned cab with improved visibility and reduced noise • Comes in a canopy or cab model

www.forconstructionpros.com/21427885

Avant 860i Compact Wheel Loader The 5,600-lb. 860i with standard telescopic boom offers a lift height of up to 137.8 in., a maximum tipping load of 4,190 lbs. and up to 4,850 lbs. of breakout force.

• 57-hp Kohler KDI 1903 TCR diesel engine • 21.1-gpm high-flow auxiliary hydraulics can run all of the company’s attachments • Optidrive drive circuit improves performance by as much as 10% • Hydrostatic drive transmission with a maximum 18.6-mph travel speed • 53.9-in. inside turning radius • Enclosed cab with A/C available

Dressta TD-16N Dozer

www.forconstructionpros.com/21123120

www.forconstructionpros.com/21121146

14 EQU IPMEN T TOD AY | March 2022

The 170-net-hp TD-16N has an operating weight of 42,090 lbs. and features a mid-cab design with all-round visibility encompassing 309°.

• Mid-mounted automatic dual path hydrostatic drivetrain • Standard six-way angle blade • Intuitive electrohydraulic joystick controls • Undercarriage design uses a single-track gauge for all track shoe widths for easy reconfiguration from standard to LGP undercarriage • Compatible with 2D and 3D grade control systems

www.ForConstructionPros.com

YOU DRIVE TO WORK ON A ROAD YOU BUILT.

REPUTATIONS ARE BUILT ON IT. We’re in the word-keeping business.

For us, every move counts. Our machines are taking production to a whole new level. Because we know that what’s important to you isn’t just a job. It’s upholding the standard by which you measure every job.

Hitachi Construction Machinery Americas Inc.

Load up on product details at: hitachiwheelloaders.us

E A RTHM OV I N G Products

Barreto 825TKL Mini Track Loader The 825TKL has a 25-net-hp Kubota D1105 three-cylinder, Tier 4 diesel engine and a rated operating capacity of 800 lbs. at 35% of tipping capacity.

• Track carriages utilize two sets of articulated rollers to absorb impact and traverse smoothly over obstacles and uneven ground • Ground pressure of 4.6 to 5.9 psi depending on track size • Secondary hydraulic tensioning system helps maintain the correct track tension in reverse • Electric-over-hydraulic drive control system • Universal attachment plate

www.forconstructionpros.com/21119692

New Holland B75D Backhoe-loader The economy class B75D has an 18,298lb. operating weight and provides over 18 ft. of maximum digging depth.

• Standard four-wheel drive and a power shuttle synchromesh transmission with four forward and four reverse gears • 74-gross-hp FPT 3.4-liter engine has a diesel oxidation catalyst with no fluids or diesel particulate filter required • ROPS/FOPS-certified canopy or optional enclosed cab • Comes with four front and two rear halogen work lights • Includes a heavy-duty hydraulic oil cooler and 7-micron, spin-on oil filter

www.forconstructionpros.com/21784414

VF Venieri articulated multifunctional backhoe-loaders combine an articulated front loader with Z-bar kinematics and a power excavator on the back with the carry-on system (four wheels equal-size drive).

• Four models range from 8,800- to 21,900-lb. operating weights and offer 52 hp (VF 1.33B) or 106 hp • Backhoe dig depths from 9 ft. to 19 ft. 8 in. with breakout force from 5,730 to 13,450 lbs.

• Loader bucket capacities from .5 to 1.7 cu. yds. with breakout force from 5,600 to 23,800 lbs.

• Hydrostatic transmission enables speeds up to 25 mph

www.forconstructionpros.com/21259214

A high-lift (HL) loader arm option for the 4.5-cu.-yd. 457 HT enables a hinge pin height of 15 ft. 5 in., 23 in. higher than the standard ZX loader arm.

• HL loader arm reduces stress on the loader end and improves roll-back torque for easier curling of heavy attachments at full operating height • Advanced kinematics on loader end offers enhanced visibility to attachment • 44,428-lb. operating weight • 258-hp MTU four-cylinder diesel engine meets Tier 4 Final without a DPF • CommandPlus cab provides high central operating position, seat-mounted controls and enhanced visibility

www.forconstructionpros.com/21123317

16 EQU IPMEN T TODAY | March 2022

The Elise 900 Electric uses three electric motors, two of which are used for travel and one for the hydraulic system only.

• Standard battery provides a run time of two to eight hours under load depending on application • Upgrading to 400Ah battery increases working time 30% to 40% and rated operating capacity from the standard 1,948 lbs. to 3,000 lbs.

• Features a boom height of 11.8 ft., side tilt of 47° and a self-leveling platform • Maximum loader speed of 8.2 mph • Includes enhanced chassis clearance, an ergonomic design and can be controlled remotely via a mobile app

www.forconstructionpros.com/21133219

LiuGong 835H Wheel Loader The 28,770-lb. 835H utilizes a 154hp Cummins B4.5 turbocharged and intercooled, Tier 4 Final diesel engine paired with a powershift transmission.

• Can handle a 20,054-lb. tipping load (straight) and delivers 20,232 lbf. of bucket breakout force • 8-ft. 11-in. dump clearance at full discharge height with 3.0-cu.-yd. bucket • Hydraulic system includes a piston-type main pump with system pressure of 3,770 psi • Includes limited-slip differential front and rear axles, 12° axle oscillation, articulated steering and wet disc service brakes

www.forconstructionpros.com/21771968

Yanmar SV40 Compact Excavator

Ranko VF Venieri Backhoe-loaders

JCB 475 HT High-lift Loader

KOVACO Elise 900 Electric Skid-steer Loader

The 9,206-lb. SV40 ultra-tight tailswing compact excavator is designed to give operators the flexibility, stability and performance of a 5-ton machine without the need for a CDL. • 39-hp Yanmar electronically controlled, Tier 4 Final diesel engine • VIO progressive three-pump hydraulic system (VIPPS) • Delivers a digging depth of 11 ft. 3 in.

• Standard SMARTASSIST remote communication system, ECO Mode, Auto-Decel Mode, backfill blade lever-controlled with float position, two-speed operation and LCD monitor • Cab or canopy with optional second PTO function, four- or six-way blade and added counterweight

www.forconstructionpros.com/21131888

Wacker Neuson SM100 Utility Track Loader The 3,300-lb. SM100 has a 1,000-lb. rated operating capacity at 35% of its 2,857-lb. tipping load.

• 24.7-hp Yanmar turbocharged engine • Optimized radial lift path enables a hinge pin height of 85.7 in.

• Undercarriage includes 9-in.-wide tracks for low ground pressure and tripleflanged rollers to reduce wear, de-tracking and maintenance • Large, spring-suspended operator platform with ergonomic padding and an operator presence system • 35.5-in. width allows access in confined spaces

www.forconstructionpros.com/21808651

Kubota Next-generation R540 and R640 Wheel Loaders The updated R540 and R640 are available in canopy and cab models and feature redesigned arms offering better visibility for connecting attachments without leaving the cab.

• R640 boasts an operating weight of 11,563 lbs., 64-hp Tier 4 Final engine and a maximum breakout force of 9,869 lbs. and 8,161 lbs. of lifting capacity • R540 has a 10,285-lb. operating weight, a 54-hp Tier 4 Final engine, a maximum breakout force of 8,183 lbs. and 6,767 lbs. of lifting capacity • Cabin offers 360° panoramic view • Standard multi-function control lever • Standard LED working lights

www.forconstructionpros.com/21283915

www.ForConstructionPros.com

Komatsu D71-24 Dozer Weighing from 49,824 to 50,927 lbs., the 237-hp D71-24 hydrostatic transmission (HST) dozer is effective at grading, pushing, side cutting and work on soft ground, providing the flexibility to move from production to finish grading.

• intelligent Machine Control 2.0 can significantly improve productivity • Comes with a high-capacity, wearresistant blade • Able to maintain ground speed while operating under heavy loads in H mode • Parallel Link Undercarriage System (PLUS) features rotating bushings • Distinctive slant nose design offers enhanced visibility to the cutting edge and greater balance and maneuverability

www.forconstructionpros.com/21307488

Equipment you need.

Prices you’ll dig.

Attachments, parts, and more.

www.ebay.com/heavyequipment

E A RTHM OV I N G Products

John Deere L-Series Backhoe-loaders The L-Series includes engine upgrades, pressure-compensated load-sensing (PCLS) hydraulics on the 310SL and machine control improvements.

• 310L, 310SL, 315SL, 310SL HL and 410L feature a John Deere PowerTech EWL 4.5L, Tier 4 Final diesel engine that boosts horsepower across the models • Lift mode added to 310SL provides up to a 15% increase in backhoe lift capacity • AutoShift technology available as a base offering on the 310SL, 315SL, 310SL HL, 410L and 710L • Optional Auto Ride Control • 310L EP includes a simpler frontaxle design and a four-speed manual synchromesh transmission

www.forconstructionpros.com/21204857

Komatsu PC88MR-11 Excavator The 67.7-hp PC88MR-11 reduced tailswing excavator has an 18,739- to 19,224-lb. operating weight and bucket digging force (SAE) of 11,982 lbs., with a bucket capacity of .12 to .26 cu. yds.

• Standard high-flow auxiliary hydraulics with proportional joysticks for precise attachment control • Six working modes • High-efficiency Tier 4 Final engine and viscous fan clutch work together to lower overall fuel consumption by up to 13% • Standard 7-ft. 7-in. grading blade • Quiet, climate-controlled cab with air suspension seat, Bluetooth radio and high-resolution monitor with rear view camera

www.forconstructionpros.com/21366856

Ditch Witch RT70 Trencher The RT70 features an ergonomically designed operator station with an open layout and a 90° swivel seat, more leg room and intuitive controls.

• 72-hp Yanmar Tier 4/Stage V-compliant diesel engine • Cooling fan reduces temperature levels in the operator station by moving exhaust out of the side of the machine • Footprint of just 73 in. wide • Crab and coordinated steering modes allow turning with a steering wheel instead of two separate levers • Modular design offers a single base unit with the option to move from tires to tracks

www.forconstructionpros.com/21722813

Caterpillar 980 and 982 Wheel Loaders The 30,344-lb. 980 and 35,510-lb. 982 have 420- and 432-hp Cat C13 Tier 4 Final diesel engines that enable a full turn static tipping load of 20,965 and 22,418 lbs. and breakout force of 51,008 and 59,060 lbs.

• 980 XE and 982 XE feature a continuous variable transmission (CVT), fine rimpull modulation capability and virtual gears • Come with Cat Payload with Assist or optional Cat Advanced Payload • Autodig with Auto Set Tires can automate the complete bucket loading cycle • Cab features include a high-resolution touchscreen display and seat-mounted electrohydraulic joystick steering system

www.forconstructionpros.com/21497247

Bobcat L65 and L85 Compact Wheel Loaders The 55-hp L65 and 68-hp L85 offer 9,944- and 11,164-lb. operating weights with rated operating capacities from 3,133 to 3,759 lbs. and 3,974 to 4,786 lbs., respectively.

• Redesigned 2.4L, turbocharged, Tier 4 engine and electronic hydrostatic transmission (E-HST) • Include articulated steering, two-speed travel, advanced attachment control mode, bucket level indicator, differential lock, Bob-Tach System and more • Z-bar linkage design • Roomy cab offers low noise levels, intuitive controls, a 5-in. display with Jog Shuttle and comfortable seat with adjustable, seat-mounted joystick

www.forconstructionpros.com/21759816

Manitou Skid-steer Loaders This lineup of reliable, high-performance radial and vertical lift skid steers includes nine models rated from 34.7 to 120.7 hp and powered by top engine suppliers.

• Operating weights range from 4,200 to 11,665 lbs. with rated operating capacities from 1,050 to 4,200 lbs.

• Generate 2,975 to 9,040 lbs. of breakout force • Hinge pin heights range from 107.5 to 143.8 in.

• Deliver 14.5- to 30.1-gpm hydraulic flow (standard) • Nimble R1050 offers an overall envelope of only 89” x 48” x 70”

www.forconstructionpros.com/21509415

18 EQUIPMEN T TOD AY | March 2022

Vermeer ATX530 Compact Articulated Loader The ATX530 compact articulated loader has a telescopic boom that extends 21.6 in. for loading materials to a dump height of 108.3 in. (hinge pin height).

• 933-lb. rated operating capacity (straight) • Standard weight of 2,711 lbs. with rear counterweights and without attachments • Lift capacity-to-weight ratio allows contractors to use a lighter machine while still being able to carry heavy materials on the jobsite • 25-hp Kubota D1305 diesel engine • Multi-tool attachment plate

www.forconstructionpros.com/21772014

Case TV620B Compact Track Loader The 114-hp TV620B has a 6,200-lb. rated operating capacity, a bucket breakout force of 12,084 lbs. and 74 in. of track on the ground.

• Heavy-duty undercarriage and 17.7-in. rubber tracks allow for 6.1-psi ground pressure • Standard adjustable electrohydraulic controls, high-flow hydraulics, auto ride control, one-way self-leveling, hydraulic coupler, auto-reversing fan and LED light • Cab features a redesigned operator interface, 360° visibility and an 8-in.

LCD multifunction display • Rear view camera visible in a split-screen display with machine data

www.forconstructionpros.com/21771466

Sany SLB95 Backhoe-loader The SLB95 backhoe-loader has a 17,637lb. operating weight, a 14-ft. 3-in. maximum digging depth and 12,354 lbf. of backhoe bucket breakout force.

• Low-maintenance Deutz TCD3.6-L4 Tier 4 Final engine rated at 95 net hp at 2,200 rpm • Four-wheel-drive powershift transmission with limited-slip differential for traction • 41.2-gpm load-sensing hydraulic system with pilot controls and ISO/SAE pattern changer • Loader includes full float function and return-to-dig • Auxiliary circuit on backhoe for breakers and other attachments

www.forconstructionpros.com/21784397

Sunward SWL3230 Skid-steer Loader The SWL3230 skid-steer loader brings speed, reliability and the optimal amount of power thanks to a 74-hp Kubota engine.

• Rated operating capacity of 2,427 lbs. with breakout force of 5,472 lbs.

• Can easily load up to 8,000 lbs. and has a tipping load of 4,854 lbs.

• 123-in. height to hinge pin • Can quickly maneuver around the jobsite with a max speed of 7.8 mph • Turning radius of just 4 ft. 5 in.

• Generates 22.7-gpm standard hydraulic flow

www.forconstructionpros.com/21509420

www.ForConstructionPros.com

Products EARTHMOVING

Kubota SVL97-2 Compact Track Loader The SVL97-2 boasts a 96-hp engine with a rated operating capacity of 3,200 lbs. at 35% of tipping load.

• Provides 7,961 lbs. of breakout force and a 3.4-ft. reach at max height • Load-sensing hydraulic system and improved control valve provide more powerful pushing and driving forces • Re-engineered DEF system with lockable door • Pressurized cab includes a wider entrance, spacious interior, standard high-back full suspension seat, easy-open sliding windows and air conditioning • Optional front LED work lights

Hitachi ZX210-6 and ZX210LC-6 Utility Class Excavators

www.forconstructionpros.com/21271009

The ZX210-6 and ZX210LC-6 feature a fuel-efficient 160-net-hp Isuzu 4HKI Tier 4 Final/Stage IV diesel engine that meets emissions standards without a diesel particulate filter.

• Offer 45,836- to 48,238-lb. operating weights and maximum digging depths of 20 ft. 3 in. and 21 ft. 11 in.

• Bucket digging force (SAE) of 31,698 lbs.

• Includes High Productivity (HP), Power (P) and Economy (E) work modes, plus programmable attachment modes • Cab includes a multifunction LCD monitor with rotary control, ergonomically placed, low-effort joysticks, fully adjustable highback sculpted seat, high-efficiency HVAC system and more

www.forconstructionpros.com/21603149

Hyundai A Series Excavators The A Series excavator models are powered by Cummins Performance Series Stage V engines offering more than a 10% increase in power and nearly 20% increase in torque while using less fuel.

• HX210A features a 170-hp Cummins B4.5 diesel engine, a standard operating weight of 48,720 lbs. and is equipped with a standard 0.80-cu.-yd.-capacity bucket • HX85A compact model has a 65-net-hp Yanmar 4TNV98C engine, a 20,390-lb. operating weight with 12-ft. 10-in. twopiece boom, .33-cu.-yd. standard bucket capacity and optional four-way dozer blade • 174-net-hp, 54,540-lb. HW250MH wheeled material handler also available

www.forconstructionpros.com/21124109

HERE FOR ANY JOB. ANYTIME. Starting with the highest quality of equipment, the Compact Excavator Sales line of batterypowered excavators are built to handle jobs under unique and demanding conditions. Between the 2,375 lb. 9VXB and the 3,915 lb. 17VXB (with dig depths of up to 7 feet), CES offers a range of performance and maneuverability for the tightest workspaces. With batteries built for an uninterrupted work day, these machines minimize downtime and maximize profitability. CES, is a family-owned business, putting customers first. Knowledgeable product experts are always standing by to assist with any service or maintenance issues that arise and our streamlined parts distribution keeps projects on schedule. Call today to find out how Compact Excavator Sale’s superior service can help you achieve your goals.

To learn more about Earthmoving products, visit www.forconstructionpros.com/directory.

800.538.1447 / www.KATOCES.com

ATTACHMENTS Products Caldwell MultiGrapple Lifting System

Antraquip Drum Cutters These drum cutters are suitable for trenching, controlled demolition, scaling, soil remediation, tunneling, underwater cutting and general rock excavation.

• Numerous models available for excavators ranging from 2 to 110 tons • Choice of cutter head styles to suit the application • AQ line equipped with a high-torque, low-speed hydraulic motor with rugged gearing and symmetrically aligned cutter bit patterns for maximum productivity

www.forconstructionpros.com/10076986

The multi-grapple lifting system is suited to use in any environment where handling of irregular-shaped or inconsistent loads is required.

• 3,000- to 12,000-lb. standard capacities with custom models available • Three arms provide a stable lift of irregularly shaped heavy debris • Center-mounted actuator automatically locks open the grappler arms with automatic latching • Can work with a crane hook but is more commonly used with construction equipment such as excavators and backhoes

www.forconstructionpros.com/21067900

Felco Vibratory Compaction Buckets These Vibratory Compaction Buckets allow an excavator operator to dig, place and compact all with one attachment.

• Combine performance of a vibratory plate unit with the versatility of a bucket • Eliminate transition times when switching between separate attachments • Bucket ears manufactured to match each excavator’s OEM specs or to adapt to quick couplers • Compact granular materials by forcing air in the soil to the surface to decrease air pockets

www.forconstructionpros.com/10078341

UB Equipment 300 Series Breakers The 300 Series includes 13 breaker models ranging from 350- to 10,000-ft.-lb. impact energy ratings.

• Available for skid steers, mini-excavators, backhoes and excavators • Feature a cradle-style bracket, meaning there are no bracket bolts to break • Nitrogen gas-assisted design • Control valves concealed inside of smaller units for added protection • Accumulator located on the side of larger models to protect the hydraulic system • Replaceable tool bushing

www.forconstructionpros.com/10085399

Brunner & Lay Demolition Tools A wide range of demolition tools are available for use with most types of heavy-duty, boom-mounted breakers.

• Manufactured from high-quality heat-treated steel • Provide the hardness, impact strength and durability required to face arduous conditions in quarrying, mining and other applications • Include points, chisels, blunts and other specialized working ends and in special lengths

www.forconstructionpros.com/10077444

Rotobec RCB Construction Breakers Eight monoblock breakers are available for excavators ranging from .08 to 15 tons and five tie-rod models are offered for excavators from 17 to 72 tons.

• Monoblock design includes a polyurethane jacket to reduce impact vibrations to the machine and lower noise levels • Diaphragm accumulators used for consistent performance with no recharging required • Tie-rod design incorporates a heavy-duty tie-rod assembly and internal components that are easy to access and maintain

www.forconstructionpros.com/10962632

Allied Rammer Small Range Breakers

Sneller Machinery 275-hp Shredder Attachment

E-Z Drill 210 Series Concrete Drill Attachments

The 275-hp Shredder attachment is self-powered, will not limit the carrier’s powers or functions and requires no change to the excavator.

• Weighs approximately 8,200 lbs. and requires a 25-metric ton or larger excavator • 60-in. drum with stationary carbide teeth will shred on average 4 acres or more per day • Teeth can be changed quickly without bolts • Remote controlled from the cab • 60- and 170-hp models available to suit smaller size excavators

This equipment-mounted, pneumatic concrete drill attachment series includes the three-gang Model 210-3 EQ MT, four-gang Model 210-4 EQ MT and fivegang Model 210-5 EQ MT. • Compatible with most models of backhoes and excavators • Capable of drilling 5/8- to 2 1/2-in.diameter holes at a depth of 18 in.

• Each drill motor requires a minimum of 100 cfm for operation • Minimum of 300 cfm required to power the Model 210-3 EQ MT • User-friendly, easily accessible control panel mounted on drill

www.forconstructionpros.com/10088389

www.forconstructionpros.com/10278334

20 EQU IPMEN T TODAY | March 2022

The 555, 777 and 999 Rammer small range breakers are designed without tie-rods and incorporate the Constant Blow Energy (CBE) plus operating system.

• For carriers between 7,500 and 27,600 lbs.

• Integrated one-piece tool bushing design requires fewer parts and is easily field replaceable • Box-type housing with high-tech dampening material reduces noise and vibration and fully protects the power cell • Dual accumulator (High/Low Pressure) design provides maximum power with less pulsation in hydraulic lines

www.forconstructionpros.com/12138533

Kinshofer DXS Mobile Shears The DXS mobile shears have been engineered to deliver a scrap shear with maximum force, enhanced speed and low weight ratio.

• Can be used for a variety of tasks including demolition, scrap processing and tire recycling • Equipped with DemaPower 2.0 hydraulic cylinder technology that delivers 25% more power and faster cycle times

www.forconstructionpros.com/20988130

www.ForConstructionPros.com

ATTACHMENTS Products

Dragon Screed Skid-steer Attachment

Diamond Mowers Skid-steer Drum Mulcher Attachment

This concrete and gravel leveling equipment can be used for leveling subgrade and screeding concrete on pours from 6 to 22 ft. wide.

• Can be configured to work on the sides or in front of loader, in forward or reverse • Wireless remote control allows operator to select from five vibration speeds • Wide floats, each with a vibrator attached, drag smoothly behind the screed bar • Hydraulic pivot allows pouring on a pitch or from an uneven surface • Quick-attach handles provide maneuverability in small spaces

The Skid-steer Drum Mulcher for heavy mulching and brush clearing applications features a two-speed variabledisplacement piston motor, 41 hardened steel teeth and total attachment depth comparable to a loader bucket.

• 72-in. cutting width • Mulches up to 9-in.-diameter trees or brush continuously • Depth control ring allows better control for depth of cut • Proprietary helical tooth pattern modeled after a vacuum brush to feed material efficiently toward the center of the drum • Replaceable liner increases shell lifespan

www.forconstructionpros.com/21043528

www.forconstructionpros.com/21049597

K-Tec 1228ADT Scraper The 1228ADT is designed to move a heaped capacity of 28 cu. yds. with a 25to 30-ton articulated dump truck.

• Now available with telematics system for real-time earthmoving jobsite performance information linked to the office via cloud software dashboard • Three-piece blade with a 12-ft. cutting width • Automatic cushion ride or optional ride control • Includes responsive joystick control functionality and a digital display screen inside the truck cab • Can self load, be push loaded or top loaded

www.forconstructionpros.com/12157424

Minnich A3/A6 Dowel Pin Drills The A3/A6 pneumatically powered, machine-mounted drills can be mounted to an excavator, backhoe or skid-steer loader to form a self-contained and highly mobile drilling solution for fulldepth repair.

• Feature up to six drills • Carrier used to transport the drill, eliminating operator fatigue and improving safety • Available side-shift functionality enables operators to drill a second set of holes without having to reposition the carrier • Optional dust collection system available

www.forconstructionpros.com/20861565

Loftness Battle Ax Extreme Mulching Attachment

Bobcat Heavy-duty Buckets

The Battle Ax Extreme horizontal drum mulcher is designed for prime movers up to 375 hp.

• Rotor features built-in depth gauges to prevent the attachment from engaging too much material at one time • Two-stage cutting chamber processes material more thoroughly by cutting material twice • Equipped with twin hydraulic motors • Uses triple carbide teeth

Large excavator attachments include a trenching bucket and grading bucket paired specifically with the E145 and E165 large excavators.

• Heavy-duty trenching bucket for the E145 makes light work out of the heaviest digging and comes in 24-, 25- and 42-in. sizing options • Heavy-duty grading bucket can be pinned on, quick coupled or utilized with a thumb and is especially suited for operators looking to easily finish, grade, backfill or clean ditches

www.forconstructionpros.com/21204861

www.forconstructionpros.com/22030973

#1 Contractor’s Choice for Mechanized Cutting Solutions!

Worksaver Power Landscape Rakes Power Landscape Rakes remove debris or sod to prepare seedbed surfaces for a new lawn or renovate an existing lawn, pulverize soil or set grade on new construction sites.

• Models available for compact/mini skid steers, skid steers and three-point PTOdriven tractors • Features include flip-up end plates, flipup gauge wheels, the choice of carbide teeth or Sabre teeth and material control bar • Replaceable bearing housings and triple seal bearings provide durability and serviceability

www.forconstructionpros.com/21035699

ADDING VALUE TO YOUR EXCAVATOR TRENCHING, DEMOLITION, ROCK EXCAVATION, SOIL MIXING and more

ROCK AND CONCRETE GRINDERS

www.antraquip.net

ROCK TRENCHING ATTACHMENTS

info@antraquip.net

For Additional Information Call 301-665-1165

NEED TO INCREASE PRODUCTION? CREATES BACKFILL ON DEMAND • LEAVES TRENCH WALLS PERFECT 90 DEGREES / FLAT BOTTOM TRENCH • LOW VIBRATION

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

21

AT TACHM E N T S Products

Auger Torque Variable Mulcher This line of variable mulcher attachments enables excavators and skid-steer loaders to tackle overgrown ditches, low-level vegetation or whole tree removal.

• Working widths of 40 or 60 in.

• Provides capability of changing the whole tooth drum instead of individual teeth • Hinged cover helps to contain debris and allows easy access to the tooth drum • Robust motor and gearbox conceal gears and bearings to prevent ingress of debris • Low-profile design for enhanced visibility

www.forconstructionpros.com/21070419

Fecon BLACKHAWK BK6218 Forestry Mulcher

Artillian Tractor Mini Skid Steer Quick Attach Frame

The BK6218 includes all of the features of the BLACKHAWK mulcher frame but in a narrower frame that facilitates precision mulching.

• Features 24 knife tools and has a 62-in. cutting width • Cutting chamber designed to process material going forward or backdragging without leaving unprocessed material • 18-in.-diameter rotor • Rugged construction with 5/16-in.-thick HS steel cutting chamber with AR steel replaceable wear parts • For skid-steer and compact track loaders with 30- to 45-gpm hydraulic flows

The Mini Skid Steer Quick Attach Frame for mini track loaders includes a Common Industry Interface (CII) loader quick attach, enabling use with a variety of manufacturers’ mini loaders.

• Designed for a maximum load of 3,000 lbs. at an 18-in. load center, depending on fork tine capacity • Built using high-strength steel with MIGwelded construction • Baked-on powder coat augmented by a proprietary graphite coating on the fork rails for easier sliding of forks • Includes a built-in 2-in. receiver

www.forconstructionpros.com/22030937

www.forconstructionpros.com/22031269

Kenco Slab Crab with Serrated Teeth The Slab Crab pavement removal bucket now incorporates serrated teeth to prevent slabs from sliding or shifting during the removal process.

• Smooth lower jaw allows operator to release slab in the desired location • Available in bucket widths from 36 to 54 in.

• Standard models manufactured to process slabs from 4 to 12 in. thick and to fit 40,000- to 150,000-lb. excavators • Sizes available to fit backhoe-loaders and custom versions can be fabricated to accept larger slab thicknesses • Offered as a direct pin-on or attach with the WedgeBolt Coupler System

www.forconstructionpros.com/21110190

Oriel Attachment Product Line Quality attachments are designed and manufactured for the construction, earthmoving and forestry industries.

• Quick coupler with a “Triple Lock” design that has only three moving parts and features a “Dead Lock” for added safety • Hydraulic thumbs, digging and ditching/angle tilt buckets, tilting couplers, demolition rippers and grapples and a tree shear built to suit machine sizes from 6,000 to 100,000 lbs.

• Pallet forks and rakes also available

www.forconstructionpros.com/21244749

Clamshell buckets are designed for earthmoving applications while the CBF Crusher Bucket Series is suited for extreme working conditions like quarries and pits.

• Clamshell buckets can be supplied with or without teeth and equipped with a hydraulic rotator, plus include blades made of wear-resistant steel HB400/500 • Pins and bushings of clamshell buckets made of special steel with heat treatment for hardening • RC Series buckets available in different designs and sizes and best suited for small- or medium-sized worksites

Stanley LaBounty Multi-Jaw and Mobile Rotation Pulverizer

Vacuworx PHD Vacuum System

The LaBounty Multi-Jaw Demolition Tool (MRX) has 360˚ rotation and can be used for primary and secondary demolition and offsite concrete processing, while the Mobile Rotation Pulverizer (MRP) has a dedicated concrete pulverizer jaw.

• Interchangeable jaw with options for a concrete pulverizer, concrete cracker or shear • Open lower jaw improves penetration and rapidly downsizes material • Dual rotation motors with optimal holding power and durability • Replaceable wear areas

The PHD vacuum lifting system weighs just 25 lbs. yet makes easy work of handling materials up to 2,500 lbs.

• Connect PHD and Below-the-Hook Basket attachment to a boom, bucket or crane using a clevis hook • Mounting assemblies allow use on mini skid steers, compact excavators, forklifts, small cranes and demolition robots • Smart features include a remote control, lithium battery and dual pump design • 12V 30-amp/hour rechargeable LFP (Lithium Iron Phosphate) battery • Two dual-stage vacuum pumps build vacuum faster and release it efficiently

www.forconstructionpros.com/21111022

22

EQU IPMEN T TODAY | March 2022

Gensco Clamshell and Crusher Buckets

www.forconstructionpros.com/21115066

Breaker Technology CX Series Hydraulic Breakers The CX Series small-size hydraulic breakers are suited for continuous duty in harsh environments.

• Three models (CX4, CX6 and CX8) fit in the 400- to 800-ft.-lb. energy class and weigh from 396 to 734 lbs. with top bracket • Dual blow ratings (long and short stroke) ranging from 350 to 1,100 bpm • Recommended for carriers from 4,400 to 17,700 lbs.

• Standard silenced box with optional side plate mounting and skid-steer bracket

www.forconstructionpros.com/21118012

Rockwater CB Breakers CB Hammers are available for excavators, backhoes and skid steers ranging from 0.8 to 55 tons.

• Compact, lightweight range for compact excavators and skid steers includes a unique valve system and plumbing design that provide power and efficiency while requiring less oil flow • Medium range for backhoes and excavators offers power and versatility for working with a wide range of operating pressures and oil flows • Heavy-duty range for excavators beyond 20 tons are fully box framed with damping materials to reduce noise and recoils to the carrier, and come pre-installed with an auto grease system

www.forconstructionpros.com/21070427

www.forconstructionpros.com/21113999

www.ForConstructionPros.com

Products AT TACHMENTS

May-Wes Poly Cutting Edges Poly Cutting Edges protect pavement from plow damage and reduce shock to equipment in uneven surface conditions.

• Manufactured with durable non-stick UHMW poly • Available beveled on both sides for horizontal applications such as pay loaders and skid steers • Also offered unbeveled for vertical applications such as truck and ATV plows • Custom hole and counter bored hole drilling and hardware kits available

www.forconstructionpros.com/21614911

EDGE Dirt/Construction Bucket EDGE dirt/construction buckets are offered as standard/extended or heavy duty (with or without flush-mounted teeth) and as standard, high or low heel.

• Feature a .75-in. cutting edge thickness and 34.6-in. bucket depth • Heaped capacities range from 11.4 to 23 cu. ft.

• Deliver enhanced cutting edge visibility and high breakout force • Compatible with various Gehl and Mustang skid steer and compact track loaders

www.forconstructionpros.com/21205035

Terex Compact Equipment Drilling and Auger Tools

REMU CR 1100 Crushing Bucket

This line of hydraulic auger drives, augers and accessories is suited for use with skid steers and other compact construction equipment.

• Includes dirt or rock augers with 4 1/2- up to 36-in. diameters • Standard replaceable teeth and a 2-in. hex coupling • Optional round coupling in 2 or 2.5 in.

• Suited for equipment operating at a 3,500- to 5,500-ft.lb. torque range and stem length of 48 in. or less

The CR 1100 crushing bucket is designed to decrease the volume of most common materials from demolition sites including tile, concrete, drywall and asphalt.

• Slow rotating crushing drum powered by two direct drive motors ensures high torque • Maximum cutting force of 38,500 ft.-lbf.

• Operated with a 25- to 40-ton excavator • Total processing capacity of 40 cu. meters per hour

www.forconstructionpros.com/22030992

Alpine G40 High Performance Geared RockWheel The G40 is suited for excavators from 20 to 50 tons and generates a maximum cutting force of 30,300 lbs.

• Cutting drum speed of 45 to 75 rpm • Max cutting head torque of 34,100 ft.-lbs.

• Cutting width of 33 in. with demo drums • 190-hp input power (continuous) with a max operating pressure of 5,800 psi and required flow rate of 50 to 110 gpm

www.forconstructionpros.com/21940356

Epiroc ES Hydraulic Breakers The ES hydraulic breakers include the ES 60, ES 70 and ES 80 models for carriers from 2,800 to 26,500 lbs.

• Slim, compact design provides easy handling, good visibility and high maneuverability • Solid block of special casted material eliminates need for a separate guiding system, tie-rods or stud bolts • Removable piston liner increases serviceability • Integrated control valve optimizes efficiency while the energy recovery system increases operating efficiency and lowers vibrations

www.forconstructionpros.com/21129707

Okada TSWB Series Primary Crusher The TSWB concrete crushers include eight models weighing from 1,940 to 26,460 lbs. and suited for carriers from 13 to 330 tons.

• Crushing force at tip ranges from 40 tons for the 620V to 242 tons for the 2400V • Seamless casting components and a custom tooth design enable faster material fractioning • Feature a large jaw opening, 360° hydraulic rotation, standard speed valve for shorter cycle times, built-in pressure relief valve and flat-mount design • High-pressure twin cylinders with cylinder rod covers (except TSWB 2200V)

www.forconstructionpros.com/21131869

Increase your bottom line with job matched attachments from Worksaver.

www.forconstructionpros.com/21201287

John Deere ME36 and ME50 Mulchers

Montabert V7000 Hydraulic Breaker

The ME36 and ME50 mulchers are equipped with knife-style cutting teeth on a split ring rotor.

• Spiral double helix tool pattern and tool shape allow for efficient cutting of up to 5-in. material • Controlled and metered cutting depth allows the operator to maintain high rpms and a productive mulching rate • Teeth may be sharpened and flipped for a fresh cutting edge • Tested and optimized to work with the company’s excavators and compatible with many competitive 5- to 10-ton models

The V7000 fits in the 20,000-ft.-lb. impact energy class and is suited for carriers ranging from 70 to 120 tons.

• Variable energy technology automatically adapts breaker energy according to the rock/material hardness • Automatic pressure regulator • Energy recovery valve captures recoil and converts it back into additional energy • Suspension system reduces vibration and wear • Includes blank fire protection, an automatic lubrication system and optional air pressurization kit for underwater applications

www.forconstructionpros.com/21977778

www.forconstructionpros.com/21131861

www.ForConstructionPros.com

• Designed to be used by asphalt, landscaping, and concrete flatwork contractors.

• 8-foot, six-way hydraulically controlled moldboard operated by an in-cab remote.

• When matched with a laser system, allows the grader to maintain grade to tight tolerances.

Visit worksaver.com to learn more

Patented SSGB-8B Skid Steer Grader Blade

Built with Sunshine

Built with Sunshine and Manufactured in the USA

Worksaver, Inc., P.O. Box 100, Litchfield, IL 62056-0100 Phone: 217-324-5973 • Fax: 217-324-3356 worksaver.com • E-mail: sales@worksaver.com

Designed. Engineered. Remarkable Value.

March 2022 | EQ U I P MEN T TO D AY

23

AT TACHM E N T S Products

ASV Attachment Line This line of branded attachments includes a full range of buckets, pallet forks, grapples and brush mowers as well as receiver hitch plates, with each attachment type available for every machine in the company’s lineup.

• Tested for use with ASV machines to allow plug-and-play application • Include standard buckets with bolton cutting edges, tooth buckets, tooth bars, light material buckets and 4-in-1 multipurpose buckets • Pallet forks available in up to a 6,200-lb. capacity • Grapple rakes and grapple buckets available

www.forconstructionpros.com/21940318

Komatsu V-Series Hydraulic Breakers The 100% hydraulic-fired V-series breakers modulate their impact force and frequency with up to 16 working positions to match to most applications.

• Compatible with the PC210 up to the PC490 excavators • Energy-saving recovery valve recuperates energy to drive efficiency • Automatically select best piston stroke length and speed based on material hardness • Shock-dampening upper and lower suspensions help reduce risk of cracking excavator booms and breaker housings • Enclosed sound-dampening housings

www.forconstructionpros.com/21940345

Yanmar Stowable Utility Hook The Stowable Utility Hook option provides a dedicated, engineered lifting point built into the machine linkage, providing a stronger position from which to lift heavy objects.

• Multi-directional design allows it to swing in each direction, as well as 360° swivel movement for optimal positioning of lift and load • Stows out of the way with an easy to operate lock pin when not in use • Single recessed zerk fitting for ease of maintenance • Can be retrofitted onto all Yanmar compact excavator models from the ViO25 up to the SV100 in as little as 20 minutes

www.forconstructionpros.com/21940390

Mecalac Hydraulic Thumb The hydraulic thumb option is available on 6MCR skid excavator and 7MWR wheeled excavator models with two-piece boom with offset and can be added to existing models with this boom.

• Constant pressure exerted throughout the cylinder’s stroke ensures precise control of the load • Composed of four teeth and is compatible with the company’s CONNECT hydraulic quick coupler • Permanently mounts to the bucket linkage where it is powered by the boom’s hydraulic cylinder • Can remain attached during digging work or other tasks

www.forconstructionpros.com/21415756

General Equipment 2350 Bor-Max Series Earth Augers

Leading Edge Multi-DigNRip V-Raptor Bucket

The 2350 Bor-Max Series earth augers now include 10- and 12-in.-diameter sizes for use with the company’s two-man EPIC Series hole diggers plus competitive products utilizing 1-in.-diameter auger drive connections.

• Combines cupped flighting with increased flighting pitch to produce cleaner holes with less spill back • Heavy steel-walled axle withstands bending and torque loads • Blade extends past the flighting edge to minimize flighting wear and extend service life • Blade and screw bit heat-treated for extended service

The Multi-DigNRip V-Raptor Bucket (MDNRVRB) features a ripper/bucket combination for excavators and backhoes.

• Can be used to rip rock, coral or frozen ground, pry out and carry stumps and cradle boulders • Rip a clean narrow V trench for utilities • Scoop and load material • Manufactured with high-strength Swedish Hardox 400 alloy steel • Available for any backhoe, mini-excavator or excavator weighing over 6,000 lbs.

www.forconstructionpros.com/21627149

Danuser Mini Skid Steermounted EP Auger System The EP Auger System is available for mini-skid steers and features a planetary gear drive with more output torque strength and greater torque for drilling through hard-compacted surfaces.

• Available in models ranging from 6 to 35 gpm and from 1,500 to 3,500 psi • Mount enables use of existing EP drive units • Swings from a knuckle to allow left to right, forward to back leveling • Enables use of 3- or 4-ft. auger lengths depending on carrier hinge pin height • Output spindle manufactured as a single piece

www.forconstructionpros.com/21627694

24 EQU IPMEN T TODAY | March 2022

Ditch Witch MT26 Microtrencher The MT26 microtrencher attachment, along with the RT80 ride-on trencher and HX75 vacuum excavator, enables operators to create a clean, deep, narrow trench in one easy pass.

• Easily installs cable deep enough to meet most requirements with minimal disruption to the surrounding infrastructure • Can cut a clean trench from 1.5 up to 3 in. wide and down to 26 in. deep • Designed with a standard hydraulic plunge to provide variable depth control • Can be equipped with a variety of blades, including the standard carbidetipped blades and the PDC blades with diamond-embedded carbide

www.forconstructionpros.com/21439945

www.forconstructionpros.com/21106160

Brokk Drum Cutters These drum cutter attachments are suited for detailed excavation applications such as contouring and trenching.

• BDC 40 and RT 15-40 offer 15.2- and 4.7-in. cutting widths and are suited for the Brokk 70 demolition machine • BDC 50 pairs with the Brokk 110, 120DII and 170 to provide a cutting depth of up to 1.2 in. at a width of 18.9 in.

• BDC 100 for the company’s larger demolition machines (200, 300, 500, 520D and 900R) is 24 in. wide with a cutting depth of up to 2.6 in.

• BDC 250 pairs with the Brokk 500, 520D and 900, is 26.8 in. wide and offers up to a 3.1-in. cutting depth

www.forconstructionpros.com/21927841

www.ForConstructionPros.com

Kubota Stand-on Track Loader Attachments A line of attachments is available for the SCL1000 stand-on track loader.

• Six buckets in standard and high-capacity options ranging from 36 to 48 in.

• Pallet forks offer 36- and 42-in. fork lengths with a 1,200-lb. capacity • Power rake features a 48-in. working width, center pivot and adjustable hydraulic angling • Trencher comes in 30-, 36- and 48-in. depths with 4- to 10-in. chain widths • Skid auger has a pendulum mount and a reversible gearbox with a 2-in. hex output shaft to attach to a variety of augers • Compact mount performance-matched for the BR360 and BR460 breakers

www.forconstructionpros.com/21509511

Products AT TACHMENTS

Mastodon Model M60-S and M60-C Mulcher Attachments

ALLU Demolition and Quarry Crushers

The M60-S and M60-C forestry mulchers have a 60-in. cut width and feature a 160cc variable piston hydraulic motor controlled by E-TECH Smartdrive.

• ECU-controlled power management system • Can be tuned to any machine in seconds using Bluetooth and a smartphone app or with the in-cab monitor • Direct drivetrain puts all available power to the rotor • Head on the M60-S produces up 780 ft.-lbs. of torque with a maximum rotor speed of 2,500 rpm • M60-C includes a hydraulically controlled dual-mode cutting chamber

The crusher series includes three models for excavators in the 10- to 33-ton range.

• Reversible crushing reduces potential for jamming, blockages or obstruction with rebar while delivering greater levels of production • Feed plate design built into jaw ensures the feeding function in a fully loaded chamber delivers high rates of production with minimal risk of bridging • Simple mechanical pin adjustment for output size regulation with quick adjustment for various output specifications • Clam-like crusher opening allows for easy, quick replacement of wear parts

www.forconstructionpros.com/21283137

Steelwrist SQ90 Fully Automatic Quick Couplers

Brandt Pin Grabber Coupler A dedicated pin grabber coupler has been added to the Hard-To-The-Core John Deere-optimized attachment lineup.

• Features a rear wedge to keep the rear pin secured to prevent a swinging attachment in the event of a hydraulic failure • Spring-engaged/hydraulically released internal safety-lock keeps the rear wedge in place • Hydraulic interlock requires coupler to be fully curled toward the cab in order to be disengaged • Hydraulic check valve maintains pressure in cylinders in the event of hydraulic hose breakage until proper function is restored • Works with all Deere excavator models from the 80-Series to 400-Series

www.forconstructionpros.com/21427390

The SQ90 fully automatic coupler system is targeted toward excavators up to 70 tons in the demolition industry.

• Provides increased safety and the ability to change hydraulic-powered work tools in seconds without leaving the cab • Compliant with the Open-S standard • Upgraded Front Pin Lock safety solution offers mechanical lock of the front shaft to limit the risk of an unintended drop of heavy demolition tools • Hydraulic couplings with Qplus technology enable higher hydraulic flows with less pressure drops

www.forconstructionpros.com/21940361

Level Best Precision Grader Blade The GB108 Precision Grader Blade has a 108-in.-wide rugged blade that adjusts in four directions and works with all makes of 2D and 3D guidance systems, including GPS and robotic total station (RTS) systems, as well as manually.

• Designed to fit all popular makes of compact track loaders • Enables high-precision grading of sub-surfaces to within 0.1 in. of spec • Features eight-way blade adjustment, a reversible cutting edge and oscillating front axle to stabilize operation • Includes foam-filled tires, a powder-coated finish, convex mirrors for visibility to material, proportional hydraulic valve and hoses with flat-face couplers

www.forconstructionpros.com/21124713

Case Precision Grader Blade This Precision Grader Blade for largeframe compact track loaders (CTL) is compatible with the use of laser receivers, sonic tracers, GNSS/GPS and total stations.

• “Plug and play” attachment design with auxiliary hydraulics and 14-pin electrical connection of a large-frame CTL • 108-in. moldboard capable of jointly changing elevation and slope through dual lift cylinders and achieving 60° of combined blade rotation and 26 in. of combined blade side shift • Motion and action controlled through the existing joysticks of the CTL • Provides 97 in. of grading width even at full rotation

www.forconstructionpros.com/21710565

Caterpillar H190 S and H215 S Performance Series Hammers The H190 S and H215 S fit in the 13,000- and 18,000-ft.-lb. impact energy class and deliver 370 to 530 and 300 to 520 bpm, respectively.

• Switchable power mode from high frequency/low power to low frequency/high power to fine tune power to the material being broken • Buffering material dampens vibration feedback to the carrier • H190 S sized for use on 349 through 374 excavators and the larger H215 S is designed for the 374 and 395 • Auto Stop instantly terminates hammering when tool breaks through material

www.forconstructionpros.com/21927764

www.ForConstructionPros.com

www.forconstructionpros.com/21121513

MB Crusher MB-HDS523 Shafts Screener Bucket The MB-HDS523 is compatible with excavators ranging from 30- to 45-ton operating weights and features five shafts positioned to ensure a greater production rate and processing speed.

• “V Shaft System” design creates a simultaneous dual screening effect • Concealed comb allows material to enter and flow through rotors without jamming • Powered by two motors for consistent and quick performance • Shafts can be easily switched out and replaced on site in minutes • Rotors can be easily extracted and repositioned

www.forconstructionpros.com/21497140

BATTLE AX LOW AND HIGH FLOW SKID STEERS & EXCAVATORS 10,000 LBS - 80,000 LBS

DON’T BITE OFF MORE THAN YOU CAN CHEW …OR LESS

EXCLUSIVE DEPTH GAUGE DESIGN Maximize productivity by not biting off too much, or too little, material at one time. The new Battle Ax rotor has unique depth gauges that optimize the material feed rate for top efficiency.

Mulching Heads

TWO-STAGE CUTTING CHAMBER Thoroughly process material with the exclusive two-stage cutting chamber featuring an adjustable primary shear bar.

Flail Mowers

Mechanical Trimmer LOFTNESS.COM

March 2022 | EQ U I P MEN T TO D AY

25

Advertorial

Pour Concrete without the Hassles–and Hazards–of Gas

SOMETHING HAS TO CHANGE Starting gas equipment can be so frustrating- if you can get it started at all. Making sure you have gas on hand, performing regular maintenance, repeatedly pulling the pull-start rope over and over again just to get the equipment to sputter to life- it can be such a waste of time.

Assuming all that goes to plan, there’s no denying that working with light equipment is not exactly good for your body.

With traditional gas screeds, users are pulling significantly heavier machinery through already wet concrete, exposing themselves to excessive vibration, physical strain, emissions, and noise.

The Bottom Line- Workers need to return home each day just as healthy as when they arrived at work. This not only improves short-term health for valued workers but keeps a healthy workforce in place to stay on the job longer. In 2021, 86% of contractors reported moderate to high difficulty finding skilled workers, and it’s

26

becoming more important than ever to keep workers on the job.

But there is good news- the frustrations of gas-powered equipment and the injuries from noise and vibration that come along with prolonged use are preventable.

BATTERY-POWERED SOLUTIONS MX FUEL™ offers an effective alternative to gas engine noise and vibrations, provides a better experience for your workers, and increases safety and productivity. It’s a win-win.

The lower noise level of battery-powered solutions means users can communicate while they’re operating the machines, adding safety and productivity. MX FUEL™ greatly reduces gas engine vibration, adding to the safety and comfort of the worker. Freedom from gas engines means no carbon monoxide emissions. Work can be done conveniently and safely in a confined space, as there are no emissions. Additionally, with no gas engines, there’s no mixing gas and oil or maintenance.

E Q U IPMEN T TODAY | March 2022

The push-button start provides instant power with no priming, choking, or pull-starting, even in cold weather.

Leveraging the gamechanging MX FUEL™ system, Milwaukee set out to disrupt the process of pouring concrete and provide users with solutions that promote a safer jobsite while improving productivity.

Vibratory screeds are one of the most common pieces of equipment used to level concrete when pouring, however they come with many pain points such as excessive noise and emissions. Not to mention that they are notoriously unreliable due to improper engine maintenance, it is not uncommon to see one to two backup screeds on the jobsite. The solution to these issues comes in the form of the MX FUEL™ Vibratory Screed, which matches gas performance and runtime while eliminating downtime on the jobsite. There is no need to pull the recoil, handle gas and oil, or perform regular maintenance to keep gas equipment operating properly with battery-powered equipment. The push-button start offers users the most consistent starts and reliable pours, eliminating risk and unplanned costs.

Another solution critical to the wet concrete process is the MX FUEL™ Backpack Concrete Vibrator, which was designed specifically to eliminate gas emissions and in turn, reduce vibrations and stress felt by users for a more comfortable experience, as well as eliminate the risk of breathing fumes. It generates the power to push up to 2-1/2” heads and consolidates up to 70 yds³ per charge with a 1-1/2” head and 7’ shaft. The wireless remote allows users to turn the machine on from up to 30 feet away for more freedom when using long whips.

Together, the MX FUEL™

Backpack Concrete Vibrator and Vibratory Screed are each 50% quieter than their gas counterparts and produce zero emissions.

Milwaukee Tool’s dedication to the concrete user is apparent through their focus on delivering disruptive solutions that increase safety and productivity on the jobsite. It goes without saying that they are just getting started.

MORE ABOUT THE MX FUEL™ EQUIPMENT SYSTEM The MX FUEL™ Equipment System is the output of years of tireless research and investment in new technology, ground-up development of new batteries, motors, and electronics.

Designed to take on the very

www.ForConstructionPros.com

same gas equipment that contractors have depended on for years, Milwaukee Tool’s MX FUEL™ System eliminates emissions and the frustrations of gas maintenance that have been deemed acceptable on jobsites for decades, and significantly reduces the overall noise and vibration. Additionally, this System eliminates tripping breakers, voltage drops, and trip hazards.

Much like the company’s M18™ System, which will continue to deliver power tool solutions for contractors, each of the solutions on the MX FUEL™ System are all tied together on a single, compatible platform that will grow with additional solutions over the years to come.

NEW

TM

EQUIPMENT S Y S T E M TM

MX FUEL™ Vibratory Screed MXF381-2CP

LEARN MORE

TM

or visit https://mke.tl/27q86

ALL MX FUEL™ BATTERIES FIT ALL MX FUEL™ EQUIPMENT

TRUCKS & TRANSPORTATION Products Morooka MST-2000VDL Rubber Track Carrier

Rokbak RA30 Articulated Hauler The 30-ton RA30 articulated hauler has a 30.9-ton maximum payload with a heaped capacity of 22.9 cu. yds.

• 257-net-hp Scania DC9 five-cylinder, turbocharged, Tier 4 Final diesel engine with electronic engine management • ZF EP320 transmission with eight forward gears and four reverse gears • Fully independent front suspension • Transmission retardation system combines with exhaust brakes and fully enclosed oil-cooled multi-disc brakes to increase safety and stability • Haul Track system provides more visibility and control with live data viewable on computer or mobile devices

www.forconstructionpros.com/21018930

Freightliner 114SD with Cummins X12 The 2,050-lb. Cummins X12 engine can be spec’d in the 114SD, delivering up to 500 hp and 1,700 lbs.-ft of torque.

• Engine offers a low-friction design for improved efficiency and is compatible with fully automatic, AMT and manual transmissions • Features a GVW up to 92,000 lbs. and has a clear back of cab for easy upfit • Available as set-forward front or set-back axle and with a wide range of vocational rear suspensions and frame options up to 5 million RBM • 114-in. BBC steel-reinforced aluminum cab with a 2,500-sq.-in windshield and contoured hood slope for max visibility

www.forconstructionpros.com/21046598

Vanair EPEQ Electrified Power Equipment The EPEQ Electrified Power Equipment line is powered by ELiMENT Lithium Iron Phosphate batteries that enable quiet, zero-emission operation.

• Line includes electric motor-driven air compressors, electrichydraulic power, AC power inverters, welders, Level 1 and 2 EV charging, electric-driven underdecks, electric-driven abovedecks, alternators/regulators and DC-DC converters • Battery Management System provides the ability to discharge power while being charged • Fully self-contained and independent system can be mounted on, or within, combustion engine vehicles, electric vehicles or even on trailers

www.forconstructionpros.com/21772002

American Eagle Hybrid Power Source (HPS) The 790-lb. Hybrid Power Source uses automotive-grade lithium-ion technology to provide a system that is low-voltage, anti-idle compliant and quiet.

• Volta lithium-ion technology offers up to 8 hours of run time and 13.5-kWh output • Integrated 48-volt chassis alternator allows charging from the chassis on site or while driving • Includes internal thermal protection and a heating system that automatically activates to keep core temperature above minimum for charging • Can be sidepack-mounted or mounted in the load bed

www.forconstructionpros.com/21119920

28 EQUIPMEN T TODAY | March 2022

Kenworth T880S with Set-Forward Axle The T880S is offered with a set-forward front axle ranging from 14,600 to 22,800 lbs., and comes standard with the PACCAR MX-13 engine with up to 510 hp and 1,850 lbs.-ft. of torque.

• Available 10.8-liter PACCAR MX-11 engine weighs 400 lbs. less and provides up to 430 hp and 1,650 lbs.-ft. of torque, while the PACCAR PX-9 engine is rated at 380 hp and 1,250 lbs.-ft. of torque • Available Allison 4700RDS 7-Speed automatic transmission • Shown equipped with a McNeilus FLEX Controls Bridgemaster Mixer with 10.5-cu.-yd. drum

www.forconstructionpros.com/21129405

The MST-2000VDL is powered by a 249-hp CAT C7.1 engine and is suited to handle a maximum load of 22,000 lbs.

• Channel frame allows users to drill it and bolt on any attachment appropriate for its size • Heavier gauge steel in frame provides a level of stability and strength equal to a box-type frame • 2.7- to 5.4-psi ground pressure makes it suited for most sensitive-ground applications • Measures 23 ft. long, 10 ft. 6 in. wide and 10 ft. 2 in. high and weighs 22,740 lbs.

www.forconstructionpros.com/21735536

VMAC DTM70-H Multi-Power System The DTM70-H Direct-Transmission Mounted Multi-Power System is a configurable solution for service trucks fitted with hydraulic cranes or other hydraulic components.

• Priority valve and intelligent throttle control system allow for variable air-on-demand with increased cfm output while providing steady gpm output • Fixed mode with preset low engine rpm used for running hydraulic equipment and providing a steady rate of compressed air, or variable mode enables engine rpm to increase and decrease automatically based on air demand • Hydraulic bypass circuit with priority flow control valve diverts excess hydraulic flow back into the reservoir tank

www.forconstructionpros.com/21050162

Kato IC55 Crawler Carrier The IC55 crawler carrier has a maximum payload of 11,023 lbs. with only a 5.28-psi ground pressure when loaded.

• Heaped bed capacity of 3.92 cu. yds.

• 3.34-psi ground pressure when empty • 105-hp Kubota engine and two-speed transmission • Standard ROPS canopy and flatbed three-way opening vessel or optional fully enclosed ROPS cabin with heater and AC • Wide range of attachments and modifications available

www.forconstructionpros.com/22043260

Bell E-Series Articulated Dump Trucks

Caterpillar 740 GC Articulated Dump Truck

The 272-hp B25E and 311-hp B30E feature increased suspension travel and an A-frame that provides a more independent ride.

• 15.7- and 18.3-cu.-yd. load capacities (struck) with rated payloads of 52,911 and 61,729 lbs.

• Allison fully automatic six-speed planetary transmission with torque converter lockup • Automatically engaged Inter-axle differential lock provides automatic traction control • Automatic retardation • Electronic unit injection fuel system

The 40-ton 740 GC includes transmission protection features, a hoistassist system, advanced traction control system, stability assist system and a fuelsaving ECO mode.

• Automatic retarder control system • “Wait-brake” temporarily applies service brakes during pauses in the work cycle • Hill-start system • Advanced Automatic Traction Control system proactively applies differential locks to avoid wheel spin • C15 ACERT engine offers from 449 to 452 gross hp • Optional Cat Connect PAYLOAD technology

www.forconstructionpros.com/11429402

www.forconstructionpros.com/21026165

www.ForConstructionPros.com

TRUCKS & TRANSPORTATION Products

Felling Air Tilt Product Line The Air Tilt model has undergone design modifications to increase operator ease of use and safety, including extension of the fixed approach ramp from 14 to 22 in. in length.

• Load angle reduced by approximately 10° for a better load angle with a more subtle break-over point • Six models available with payload capacities ranging from 19,700 to 50,000 lbs.

• Two airbags (four optional) powered from the tow vehicle tilt the trailer and keep the deck in place for loading/ unloading • Optional ramps and full-size oval recessed strobe lights

www.forconstructionpros.com/22043272

TennaCAM Dashcam The TennaCAM dashcam device captures safety incidents and monitors the behavior of drivers operating heavy trucks and vehicles in construction fleets.

• Captures footage that provides context and acts as a source of truth in the event of an incident, accident or safety violation • Uses Bluetooth technology to trigger real-time camera recordings when unsafe driving events are detected • Available to pair with both OBD-II and JBUS fleet trackers via WiFi • Notifies when unsafe driving events are detected and dashcam video clips can be reviewed within minutes on the Tenna platform

www.forconstructionpros.com/21319524

Eager Beaver 50 GSL-PT Paver Trailer

Doosan DA45-5 Articulated Dump Truck

The 50 GSL-PT has a 100,000-lb. load capacity and 122,700-lb. GVWR and is suited for loading rollers, pavers and milling machines.

• Tapered four-beam, 16-in.-deep cambered I-beam mainframe and side rails • 10-in.-deep crossmembers pierced through the mainframe • 25,000-lb. axles with all-wheel ABS (4S3M) with spring brakes on all axles • Cush Air Ride suspension with 75,000-lb.-capacity air lift third axle

The 500-hp DA45-5 has a maximum allowable payload of 45.2 short tons, a payload rating of 90,390 lbs. and a heaped capacity of 31.9 cu. yds.

• 11-ft. loading height • Self-leveling hydro-gas suspension absorbs bumps for smoother rides • Free-swinging rear tandem bogie provides maximum traction and stability on soft ground and uneven surfaces • Maximum speed of 34 mph • Standard active payload measuring system with load weight visible on the in-cab LCD screen

www.forconstructionpros.com/20979451

www.forconstructionpros.com/21121472

IMT 11-ft. Dominator III Mechanics Truck

Minimizer Peterbilt Medium-duty Floor Mats

The Dominator III 11-ft. mechanics truck is capable of working in tighter quarters, maintaining stability and providing extra lift performance in critical work zones.

• Upgraded 25-ft. telescopic crane features a 440-lb. weight reduction and increased crane rating to 81,000 ft.-lbs.

• Crane can easily clear a 12,000-lb. load • Available with a 159.7- to 164.9-cu.-ft. compartment storage capacity and 52- to 60-in. sidepack height • Standard energy-absorbing boom support, multiplex electrical system with programmable logic and rear access package

The medium-duty custom-molded floor mats fit Peterbilt 337 and 348 mediumduty truck model years 2010-2020.

• Four floor mat kits • Laser-measured to exact fit • Tray system features raised edge to keep everything on the mat

www.forconstructionpros.com/21112699

www.forconstructionpros.com/20864168

Mack Granite Vocational Truck The Granite has a redesigned, purposebuilt interior that minimizes driver wear and tear and maximizes comfort.

• Includes a flat-bottom steering wheel for more belly room and clearance for entry or exit and Sears Seating for improved driver comfort and support • mDrive HD automated manual transmission with optional 13- and 14-speed creeper gears • Axle-forward and axle-back configurations • Choice of rail thicknesses to spec vehicle for the rigors of the job • Top-mounted rear axle carriers minimize driveline angle and improve fuel efficiency and ground clearance

CHECK IT OUT AT THE WORK TRUCK SHOW INDIANAPOLIS, MARCH 9-11, BOOTH #5567 To learn more call 866.535.7667 or visit us online at go.ThunderCreek.com/et0322.

www.forconstructionpros.com/21092126

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

29

TRU CKS & T R AN S P O R TAT I O N Products

Ram 1500 Pickup The Ram 1500 features up to 12,750 lbs. of towing capability and 2,300 lbs. of payload.

• Uconnect 5 system on Ram 1500 Big Horn models and above is faster with three times more memory and has Wi-Fi capability and tow-specific navigation • eTorque 48-volt mild hybrid system delivers improved fuel efficiency in both V6 (standard) and V8 configurations • Rated at 33-mpg highway for up to 1,000 miles of range on a single tank of fuel • Standard Ram Clean Air System filters 95% of air particulates • Ram 1500 Limited 10th Anniversary Edition joins the lineup

www.forconstructionpros.com/21772274

Verizon Connect Integrated Video Integrated Video is a road facing dashcam that uses AI and machine learning to help categorize harsh driving events.

• Begins recording once engine is turned on and continues until engine is off • Reviews footage based on driver behavior triggers and classifies it as a collision, dangerous, harsh driving or low risk • Video viewable in the Reveal fleet management software on mobile or desktop within minutes of the event or can be downloaded for later use • Identify driver and speed and see vehicle location with GPS tracking • Alerts when a video is available

www.forconstructionpros.com/21136272

Talbert Tag-A-Long AC Series Trailers The 10- to 25-ton Tag-A-Long Austin Carry-All Series (AC Series) features durable construction and a low 7° load angle to transport small- to mid-size equipment.

• Dual-axle AC-10 offers a 10-ton, 20,000-lb. capacity, 24-ft. deck length, 5-ft. 5-in. selfcleaning, spring-assisted rear ramps and 32.25-in. loaded deck height • AC-20 provides a 20-ton, 40,000-lb. capacity within the same deck dimension and loaded deck height • AC3-25 has a 29-ft. deck and a 25-ton, 50,000- lb. capacity with a 32.75-in. loaded deck height • AC-20ART and AC3-25ART include an air ramp and/or air tilt for loading of lowclearance equipment

www.forconstructionpros.com/21138130

XL Side Dump Trailer The XL Side Dump trailer is available in two-axle (XL 60 SD2-37) and threeaxle (XL 60 SD3-37) designs offering a capacity of 60,000 lbs.

• Crack-resistant, 1/4-in. AR450 steel tub with a capacity of 23 cu. yds. water level and 33 cu. yds. strike-off • Overall lengths of 39 ft. 8 in. (XL 60 SD2-37) and 41 ft. 9 in. (XL 60 SD337) and widths of 102 in.

• Easy to use tub hooks on each side of trailer automatically engage on one side if the other side is disengaged to ensure tub remains secure • Electric mesh tarp system • Equipped with six lights per side, rubbermounted LED lights and dual intensity center cluster lights

www.forconstructionpros.com/22043325

John Deere E-II Articulated Dump Trucks The 410E-II and 460E-II feature a redesigned dump body with an increased width, lowered and leveled rail height, side sheet design and widened bin.

• Operator station includes a primary display unit for daily operation and enhanced diagnostic information, a single sealed switch module, automotive-style multifunction turn signal lever and relocated HVAC controls • Normal, Eco and Traction drive modes • Simplified retarder controls include low, medium and high transmission retarder modes • 460E-II model available with an ejector body solution

www.forconstructionpros.com/21195639

Soil Connect eTicket Time Tracking Capabilities The eTickets platform provides contactless, easy to use, paperless ticketing for any industry that hauls and manages loads.

• Easily capture customer information, type of truck, destination, pictures, eSignatures, type of material, load count and more • Time Tracking seamlessly integrated to enable user to reduce timesheet errors and make accurate and timely payments to haulers • Automatically geo-tagged punch-in and punch-out function enables users to analyze route efficiencies

www.forconstructionpros.com/21927895

GMC 1500 Sierra Pickup Venturo Workforce Packages The commercial vehicle upfitting program has been extended to include Workforce service body packages, including Workforce25, Workforce45, Workforce55 and Workforce66.

• Available in a variety of configurations and options ranging from 10,000- to more than 33,000-lb. GVW chassis • Telescopic service crane options from 5,000- to 11,500-lb. max capacity, 25,000- to 66,000-ft.-lb. ratings and from 25- to 30-ft. hydraulic boom extension • Include the VLC Crane Control System and BOSS BA440 air compressor • Installed, tested and fine-tuned by technicians to exacting factory specs

www.forconstructionpros.com/21615243

30 EQUIPMEN T TOD AY | March 2022

The GMC Sierra 1500 offers the latest version of Super Cruise on the Denali with the capability to trailer while driving hands-free on compatible roads, plus an automatic lane change feature.

• Choice of 2.7L turbo, 3.0L I-6 turbodiesel, 4.3L V6, 5.3L V8 and 6.2L V8 engine options mated to six-, eight- or 10-speed automatic transmissions and with Active or Dynamic Fuel Management available on select versions • Towing technologies include Trailer Length Indicator, Jack-Knife Alert, Rear Trailer View with guidelines and trailer angle indicator, Rear SideView enhancement and cargo bed enhancement • Cargo Bed Zoom View and Bed Hitch Guidance available

www.forconstructionpros.com/21244722

Trux Dispatch & Logistics Platform This powerful and workable platform enables material producers, contractors and fleet owners to haul material more efficiently.

• Dispatch and schedule digitally with drag and drop technology • Manage orders in real time with accurate data • Go paperless with digital load slips, eTicketing and daily dispatch reports • Streamline the back office and reconcile loads hauled to loads invoiced • Find more trucks when you need them in the Trux Marketplace

www.forconstructionpros.com/22043322

www.ForConstructionPros.com

Volvo VHD The VHD includes notable upgrades including an updated exterior, safety and productivity features, new bumper and the latest in connectivity solutions.

• I-Shift transmission with crawler gears adds one or two gears to the 12-speed version • T-Ride suspension applies constant pressure on the wheels to create surefooted traction • Includes Dynamic Steering and the next generation of Active Driver Assist • Bumper features a heavy-duty 45mm tow pin rated for a full 80,000 lbs.

• Includes Remote Programming and Remote Diagnostics

www.forconstructionpros.com/21244811

Products TRU CKS & TRANS PORTATION

Ford F-150 Pickup The F-150 full-size pickup comes with standard over-the-air updates technology to constantly keep software on the leading edge.

• 3.5-liter PowerBoost full hybrid V6 powertrain available on every trim level from F-150 XL to Limited • PowerBoost system adds instant electric torque to 3.5-liter EcoBoost V6 to allow at least 12,000 lbs. of available maximum towing • Pro Power Onboard offers a 2.0-kW output on optional gas engines, and the PowerBoostequipped version comes with 2.4 kW of output or optional 7.2 kW • 12-in. center screen standard on XLT high series and above

Earthwave FleetWatcher Executive Scoreboard Feature Chevrolet Silverado Pickups The Silverado ZR2 delivers enhanced off-road capability with front and rear e-lockers and Multimatic DSSV dampers.

• Fully redesigned, premium interior on LT trims and above with standard 13.4-in. diagonal color touchscreen and elevated exterior design refresh across the lineup • Available Super Cruise driver-assistance technology on High Country with available trailering and standard Chevy Safety Assist on enhanced trims • 2.7L Turbo High-Output engine delivers 20% more torque and 3.0L Duramax Turbo-Diesel offers max towing increased to 13,300 lbs.

• Redesigned interior for LT, RST, LT Trail Boss, ZR2, LTZ and High Country trims features a sweeping horizontal instrument panel and more functional center console

www.forconstructionpros.com/21772249

This feature serves as a scorecard for the Materials Management System (MMS), allowing users to see key performance indicators in an easy to understand format via phone, tablet or computer.

• Provides real-time view of tons per hour by crew or truck, feet per minute, cycle time, trucking cost per ton and more • Color coding shows at a glance which metrics need corrective action • Total tons loaded automatically compared to shift times to show users if they are ahead of schedule or behind • Metrics can be graphed to quickly show performance over time • Users can select KPIs to display and change them as desired

www.forconstructionpros.com/21244727

Stellar TMAX 16K Aluminum Service Body The TMAX 16K aluminum service body is designed for use with 4,000-lb. cranes and smaller.

• Aluminum extrusion top allows for crane mounting without a tube crane reinforcement kit • Two built-in, drill-free accessory mounting rails • Wire harness channels inside compartments enable easy installation and keep wires out of the way • Includes stainless-steel billet-style hinges, three-point stainless steel compression latches and double spring over center door closures

www.forconstructionpros.com/22043359

www.forconstructionpros.com/21808892

Western Star 47X With a standard 111.6-in. BBC or optional 110.8-in. BBC, the Western Star 47X is suited to applications that require a shorter overall vehicle length to meet federal or local bridge law requirements.

• Short hood and wheel cut up to 50° optimize maneuverability • Hood offers forward visibility of 24.8 ft.

• ISO Tech hood suspension system protects hood from bending and cracking • X-Series steel-reinforced cab reduces mass by up to 8% while offering up to 13% more space • Approximately 200 lbs. lighter than the 49X in like-for-like spec

www.forconstructionpros.com/22043543

International MV Series Medium-duty Vehicles The MV Series medium-duty vehicles feature an aerodynamic hood and breakaway mirrors to provide enhanced visibility for drivers.

• Smart chassis packaging changes allow for improved body integration and improved operating costs for a variety of applications • Engine options include the Cummins B6.7 and L9 with increased fuel efficiency and extended and aligned maintenance intervals • Several optional collision mitigation enhancements available including the Bendix Wingman Fusion System • High-efficiency cooling module • Diamond Logic electrical system standard

www.forconstructionpros.com/21772156

AVAILABLE FOR FORD, RAM, GMC/CHEVROLET, INTERNATIONAL, MERCEDES/FREIGHTLINER

UNDERHOOD 40 - Van Series

TM

UNDERHOOD 40 - Truck Series TM

To learn more about Trucks & Transportation products, visit

UNDERHOOD 70 TM

UNDERHOOD 150 TM

DTM70-H

DTM185

Find Your Solution at VMACAIR.com/VI

www.forconstructionpros.com/directory.

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

31

FLEET MANAGEMENT Products

ASV Genuine OEM Rubber Tracks These compact track loader tracks feature an all-season bar-style tread pattern and a specially formulated exterior tread.

• High amount of ground contact combined with the Posi-Track undercarriage minimize derailment risk • Contain no steel cords with durability maximized through seven layers of embedded puncture-, cut- and stretchresistant material • Flexible reinforcements can bend around obstacles • Specialized blend of rubber compounds designed for use in industrial conditions • Patented lug design assures maximum sprocket engagement

Cummins X12 Engine

www.forconstructionpros.com/21415826

www.forconstructionpros.com/21024158

At 2,050 lbs., the X12 engine is designed for weight-sensitive applications, enabling greater payload while improving productivity and uptime.

• Delivers the required performance and transient response while maximizing fuel economy in local duty cycles • Generates up to 500 hp and 1,700 lbs.-ft. of torque • Low-friction design offers improved fuel economy with extended maintenance intervals and high mileage • Compatible with a choice of fully automatic, AMT and manual transmissions

STEMCO Wheel-end Product Line Available wheel-end products range from wheel seals to hub caps to hubodometers.

• Trifecta pre-adjusted hub assembly includes six components all in one for easier, more precise installation • Suspension products such as kingpin kits available for heavy-duty trucks • GateReader SVT sensor can be placed on fleet lot’s gate to track mileage as trucks enter and exit, with data available on a web portal

www.forconstructionpros.com/21808874

Trelleborg Earthmover Radial Series (EMR) Tires The Earthmover Radial series (EMR) range of tires is designed for loader and dumper applications.

• Delivers premium damage protection and durability • Multi-surface tread design provides control and grip on sand, rock, gravel or soil • Full-steel radial pneumatic carcass • Advanced compound • Equal load distribution for comfortable driving and low fuel consumption • 22 sizes from 24 to 33 in.

www.forconstructionpros.com/21063838

32 EQUIPMEN T TOD AY | March 2022

FPT F34 and F36 Stage V Engines The F34 3.4-liter inline four-cylinder engine delivers 74 hp with a maximum torque of 313 ft.-lbs., while the F36 3.6liter model provides from 75 to 141 hp and generates up to 443 ft.-lbs. of torque.

• F34 uses a diesel oxidation catalyst and DPF aftertreatment system, and offers quick engine response in variable load conditions • F36 uses the Hi-eSCR2 aftertreatment package and features a wastegate turbocharger and improved piston design • Both models include common rail fuel injection • 600-hour oil service intervals

www.forconstructionpros.com/21069787

Thunder Creek Expanded MultiTank Diesel Hauling Platform The MTU bulk diesel hauling platform provides better control of fueling and DEF management without requiring a CDL or HAZMAT endorsement.

• Re-launched on the Ram chassis and equipped to carry 920 gal. of bulk diesel contained in separate 115-gal. fuel tanks • Rear utility box houses the diesel pump and manifold system • Optional heated diesel exhaust fluid handling system for use in colder climates • Options include a variety of meters for measuring, security and tracking, numerous reel options and lengths, a 4-micron filter and available color schemes

Phillips 66 Guardol FE 10W-30 Heavy-duty Engine Oil Guardol FE with Liquid Titanium is formulated with a blend of synthetic and high-quality Group II base stocks and a low-SAPS additive system to provide protection in late-model diesel engines.

• Fortified with Liquid Titanium protection additive for enhanced oxidation resistance, protection against wear and increased engine protection • Warranted for use in 2010 and newer Detroit Diesel engines and 2014 and newer Cummins, PACCAR, Navistar and Volvo/Mack engines

www.forconstructionpros.com/21062174

www.forconstructionpros.com/21059638

Camso TLH 732+ Telehandler Tire The TLH 732+ tire for telehandlers delivers enhanced traction on soft surfaces, long-wearing durability when operating at higher speeds and maximum tread cleanout.

• Features a wraparound stepped tread design and extra-thick void guard • Includes tread impact protection and sidewall and rim flange protection • Wider and higher lugs • Offered in two dimensions (13.00-24 and 14.00-24) available with a ply rating of 12 or 16 to cover all telehandler needs

www.forconstructionpros.com/21271666

Nokian Ground King Tire The Ground King tire includes the Hybrilug technology, which combines features of lug and block patterns for allterrain mobility and traction combined with a high level of comfort and precise handling response on road.

• Incorporates specially aligned pattern elements and more tread compound • High-grade, wear-resistant tread compound offers extended ground contact area to enable more operating hours even in extensive on-road use • High load bearing capacity enables use of heavy work implements and high loads • Self-cleaning abilities

www.forconstructionpros.com/21085389

www.ForConstructionPros.com

Caterpillar C3.6 Industrial Diesel Engine The C3.6 Tier 4 Final/Stage V industrial diesel engine features 134 hp and 406 lbs.-ft. of torque at 1,500 rpm.

• Features 5% increase in power density, 12% increase in torque and 6% to 10% decrease in diesel exhaust fluid consumption compared to the C3.4 • Flexible aftertreatment solutions including engine-mounted options • Transparent, passive aftertreatment regeneration happens seamlessly to optimize overall machine uptime • Controllable turbocharging • Smaller package and compact design

www.forconstructionpros.com/21094417

FLEET MANAGEMENT Products Dana Genuine Off-Highway Product Solutions These customized off-highway drivetrain and motion solutions ensure peak efficiency and increased uptime for a variety of mobile and stationary industrial applications.

• Portfolio includes Spicer, Spicer Electrified, Brevini, Spicer Torque-Hub, Graziano and GWB • Genuine OE products designed to provide long life, power, reduced maintenance and increased uptime • Customization options support vehicles and machines with both conventional and electrified power sources

www.forconstructionpros.com/22031318

Perkins 2806J-E18TTA Dual-certified Engine This 18-liter series twin turbo Tier 4 Final/Stage V dual-certified engine can be installed in products used in North America and the EU without modification and with flexible installation options.

• Series twin turbos help to achieve 800 hp at 1,800 rpm and 2,736 lbs.-ft. of torque (755-hp rating available) • Mechanical electronic unit injector (MEUI) fuel system • Maintenance-free diesel oxidation catalyst (DOC) aftertreatment requires no coolant, fuel or electrical connections

A LONG WAY

TOGETHER

www.forconstructionpros.com/21111167

Milwaukee Tool M18 FUEL Mid-torque Impact Wrenches The M18 FUEL mid-torque impact wrenches provide up to 650 ft.-lbs. of torque to remove large bolts or lug nuts, while weighing in at only 5.1 lbs.

• POWERSTATE brushless motor • REDLINK PLUS Intelligence protects against overloads, overheating and over discharge • M18 REDLITHIUM battery pack • Four-mode DRIVE CONTROL offers a range of preset rpm and IPM levels, selectable from a single button on the tool • Tri-LEDs deliver brighter light with less shadows for increased visibility in confined and low-light workspaces

www.forconstructionpros.com/21197925

WHEREVER YOU ARE, BKT IS WITH YOU No matter how challenging your needs, BKT is with you offering an extensive product portfolio for every field such as agriculture, OTR and industrial applications.

BKT provides concrete, reliable and high-quality solutions to your requests and working needs.

Wherever you are, BKT is with you.

BKT USA Inc. 202 Montrose West Ave. Suite 240 Copley, Ohio 44321 Toll free: (+1) 888-660-0662 - Office: (+1) 330-836-1090 Fax: (+1) 330-836-1091

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

33

FL E E T M AN AG E M E N T Products

Curry Supply On-road Fuel/Lube Trucks The 2,000-gal. on-road fuel/lube trucks are built from the ground up and configured to any specifications with custom options.

• Four 100-gal. oil tanks standard • 85-gal. antifreeze capacity • 50- to 75-gal. DEF system • 120-lb. grease system • Hydraulic-driven pumps (fresh oils only) and 30-cfm compressor

www.forconstructionpros.com/12293798

Cojali Jaltest OHW This diagnostics solution for off-road industry diesel engines features a scanner that can read proprietary information from every manufacturer.

• Provides fault codes as well as troubleshooting guides, wiring diagrams and dealer-level bidirectional tests • Capabilities available regardless of engine manufacturer and make of machine include DPF regenerations, injector coding, limb mode resets and calibrations • Also enables parameter modifications for engine and hydraulics systems

www.forconstructionpros.com/22031341

Femco Non-Drip System

Honda eGX Electrified Power Unit The eGX advanced electrified power unit is designed to be incorporated into commercial OEM power equipment products such as concrete trowels, rammers and vibratory plate compactors.

• High-power, three-phase brushless DC motor powered by a lithium-ion battery • Provides efficient operation for existing or new applications in the 100- to 120cc displacement category • Net power output of 2.4 hp at 3,600 rpm • Quick charging of lithium-ion battery ensures maximum operating time

www.forconstructionpros.com/21497035

The Non-Drip system is a series of drain plugs and clickers specifically created to rapidly drain and refill oil from vehicles or machines without leaving any residue.

• Allows use of a single draining system for both draining and refilling • Robust brass construction suitable for changing oils and fluids at high temperatures • Single plug available in numerous sizes and designed to be used with the non-drip clicker • Decreased distance between the valve opening of the plug and nozzle opening of the clicker helps ensure no residue is left behind

Volvo Penta D16 Tier 4 Final Diesel Engine The 16-liter D16 (TWD1683VE) sixcylinder diesel engine meets Tier 4 Final/ Stage V standards and delivers 796 hp and 2,692 lbs.-ft. peak torque at 1,900 rpm.

• Exhaust Aftertreatment System (EATS) uses selective catalytic reduction technology only • Dual-stage turbo system provides high torque at low and high engine speeds and enables high-altitude performance • Smooth operation with low noise levels • Easily accessible service points and 1,000hour oil service interval

www.forconstructionpros.com/21497456

Fumoto MH-10 Hose Connector The MH-10 hose connector is designed to quickly connect a hose to any of the company’s 3/8-in. short nipple valves.

• Brass-made, durable connector easily clicks onto the nipple of a valve and snaps off • Firmly connects to any 3/8 ID hose • Will sit firmly on the nipple until the end of the oil change

www.forconstructionpros.com/22031327

www.forconstructionpros.com/21197921

IN NEED OF REPLACEMENT RUBBER TRACKS?

We’re proud that Dominion Rubber Tracks are the

Donaldson Filter Minder Connect

#1 SELLING RUBBER TRACK brand in America.

CALL US TODAY TO GET THE BEST PRICE ON RUBBER TRACKS, YANMAR PARTS, AND UNDERCARRIAGE PARTS UNDERCARR

Ashland, VA >> Jacksonville, FL >> Cincinnati, OH >> Portland, OR >> Schenectady, NY >> Dallas, TX

34 EQU IPMEN T TODAY | March 2022

800-365-7260

www.depparts.com

Filter Minder Connect is now available for monitoring fuel filters and engine oil condition on heavy-duty engines.

• Components can be installed on equipment in minutes • Integrates into existing onboard telematics and fleet management systems • Sensors can measure pressure drop and differential pressure on fuel filters, plus engine oil condition including density, viscosity, dielectric constant and resistivity • Performance data wirelessly transmitted to cloud and predictive analytics inform users when filters and engine oil are approaching the end of their optimal life

www.forconstructionpros.com/21415840

www.ForConstructionPros.com

Kohler KDI 3404TCR Diesel Engine The 74-hp KDI 3404TCR four-stroke in-line diesel engine has high-pressure injection (29,000 psi) and a turbocharger and produces up to 280.2 ft.-lbs. of torque.

• 205cc displacement • Includes a cast iron block, high pressure common rail and waste-gate turbocharger • Optimized combustion system helps achieve Tier 4 Final/Stage V standards with no DPF required • Heavy-duty construction for demanding applications • Low noise and low vibration

www.forconstructionpros.com/21259535

Products FL EET MANAGEMENT

Hot Shot’s Secret 10W-30 Blue Diamond PAO The Blue Diamond PAO diesel engine oil line includes a 10W-30 offering for heavy-duty use vehicles.

• Utilizes 100% poly-alpha-olefin (PAO) Group IV synthetic oil and Group V esters for a 100% synthetic formula • Incorporates synthetic Group IV and Group V base oils, CK-4 additive package and FR3 nano lubricant technology • Offers improved starting, added power and fuel economy, reduced soot, extended engine life and reduced friction • Improved oxidation, shearing and thermal stability

www.forconstructionpros.com/22031332

John Deere Anti-Vibration Undercarriage System An anti-vibration undercarriage system is now available with zig-zag bar tracks on John Deere 333G compact track loaders.

• Includes an isolated undercarriage, bogie rollers, updated grease points, hydrostatic hose protection shield and rubber isolators • Provides a smoother ride for the operator and enables machine to travel at higher speeds while retaining material • Bogie roller system allows for oscillating movement of rollers • Oscillating bogie arm includes only four easy to access grease points • Angled steel shield protects hydrostatic hoses from exposure to debris

www.forconstructionpros.com/21614822

Kubota D902-K Diesel Engine

Eaton Power Takeoff Unit for Ford TorqShift Transmission

The D902-K three-cylinder, electronically controlled, Tier 4 engine has a 0.898L displacement and an output of 24.8 hp.

• Common rail system • TVCR combustion system reduces the amount of black smoke to an undetectable level • Compact and easy to mount and consumes approximately 5% less fuel than the conventional model • Controller Area Network (CAN) allows engine speed and torque to be controlled using signals from the vehicle and can also acquire engine operating data for telematics purposes

The Bezares 3940 series Power Takeoff unit is designed to fit the Ford TorqShift 10-speed automatic transmission.

• DIN 5462 output shaft and special output adapters provide versatility and allow for direct mounting of highpressure piston pumps to the PTO • Includes all installation components and a wiring harness that allows use on gas and diesel Ford trucks • Pump can be installed at 45° rotation intervals for increased mounting flexibility and pump options • Provides 230 lbs.-ft. of torque with a 130% final output ratio

www.forconstructionpros.com/21415875

www.forconstructionpros.com/22031320

JAX Bio-Guard Lubricants The Bio-Guard line of technologically advanced lubricants is designed to maximize operational efficiencies with environmentally acceptable formulations.

• Meet the technical definitions and requirements established by the EPA for biodegradability, toxicity and bioaccumulation • Include oils, fluids and greases suited for the specific challenges encountered in wire rope, gearbox, bearing and hydraulic system applications • Provide reliability in harsh environments

www.forconstructionpros.com/21940131

Hilti 22V Nuron Cordless Battery Platform The Nuron 22V cordless battery platform enables cordless light-duty drilling to heavy-duty concrete breaking.

• Capable of powering more than 70 different tools • All battery packs and chargers work interchangeably under a single ecosystem to help reduce complexity • Redesigned battery interface allows a significantly higher power transfer • Reengineered Nuron batteries with a robust fiberglass-reinforced housing and external shock-absorbing bumpers • All tool data stored on the battery and sent securely to the cloud during every charge without any operator interaction

www.forconstructionpros.com/21977428

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

35

FL E E T M AN AG E M E N T Products Mack mDRIVE AMT with Left and Right Dual PTO Option

Sy-Klone Vortex Max Powered Engine Precleaner

The mDRIVE Automated Manual Transmission (AMT) now features a left and right dual Power Takeoff option that allows drivers to run hydraulic pump equipment on both sides of the vehicle.

• Available for Granite, Anthem and Pinnacle models with 12-, 13- and 14-speed mDRIVE AMTs • Available with clutched adapters with DIN-mounted or SAE flange connections • Dual PTO ports rotate counterclockwise and adapters are interchangeable and easily adjusted in the field • Available with up to two direct-mount hydraulic pumps factory-installed as well as retrofit options

www.forconstructionpros.com/22031345

Stellar TM28 Tire Manipulator The TM28 tire manipulator is available in a long or short arm version offering a rated capacity of 28,000 lbs., suited to handle large construction and mine equipment tires.

• Utilizes a forklift or loader as a tire handler • Features 110° body rotation and 360° continuous rotating pads for full operator control • Optional side shift feature allows an operator to easily make small adjustments for better control over the tire • Features include an accessory mounting rail and fallback protection with integral lock ring catcher

The Vortex MAX high-airflow powered precleaner precleans and filters dust and debris from engine intake air, ensuring only clean air makes its way downstream to the machine’s engine.

• Higher-airflow system (900 cfm) for larger machines protects engine with sustained clean air regardless of operating state, even at idle • High-efficiency filtration arrests smaller particles, extending life of engine and aftertreatment systems • Maximizes primary engine filter life • Easy to install with vertical and horizontal mounting options

www.forconstructionpros.com/22031357

Titan HK 458 Hybrid Wheel Loader Tire The HK 458 E-4/L-4 dual-rated bias tire combines the tread design of a forestry tire, a wheel loader tire and an ATV tire all in one.

• Suited for muddy, challenging construction jobsites • Bead design improves the resistance indexing in high-torque applications while still fitting the standard OTR wheel • Multiple layers of high-elongation steel belts provide puncture resistance • Currently available in 20.5-25 and 23.5-25 sizes suited to fit a range of mid-sized wheel loaders

www.forconstructionpros.com/22031354

www.forconstructionpros.com/21259541

WE KEEP AMERICA ON TRACK

Call: 800-365-7260 Visit: morookacarriers.com

36 EQUIPMEN T TODAY | March 2022

Renewable Lubricants Bio-Blast Penetrant Bio-Blast Penetrant is a highperformance, fast-acting, biodegradable penetrant that eradicates rust and dirt to quickly free corroded nuts, bolts and other frozen components.

• Fast capillary wetting action reduces surface tension to free up frozen parts quickly • Non-staining to ferrous and non-ferrous metals • Non-flammable, non-combustible formulation • Renewable, non-toxic and contains no hazardous VOCs • Available in 11-oz. aerosol cans, 12-oz. spray bottles, 1-gal. jugs, 5-gal. pails, 55-gal. drums and case lots

www.forconstructionpros.com/22031306

www.ForConstructionPros.com

Chevron Delo 600 ADF with OMNIMAX Delo 600 ADF with OMNIMAX is a heavy-duty engine oil formulated to 0.4% sulfated ash to significantly reduce the rate of DPF clogging and extend DPF service life by up to 2.5 times.

• Enables a 3% fuel economy retention advantage over the life of the equipment • Meets or exceeds API CK-4 and OEM specifications and has demonstrated optimal oxidation stability for the potential to extend engine oil drain intervals • Delivers enhanced valve train wear protection and piston deposit performance • Available in Delo 600 ADF 15W-40 and Delo 600 ADF 10W-30

www.forconstructionpros.com/21127785

Products FL EET MANAGEMENT

DeWalt POWERSTACK 20V MAX Compact Battery The POWERSTACK 20V MAX Compact Battery is a next-generation lithium-ion battery designed to provide 50% more power, enabling broad application and fast performance with cordless tools.

• 25% more compact and 15% lighter than the DCB203 battery • LED fuel gauge displays battery’s state-of-charge • Non-marring rubber overmold provides impact resistance and helps protect finished surfaces • Compatible with all 20V MAX tools and chargers in the 20V MAX system

www.forconstructionpros.com/21772036

Vanguard 400 EFI/ETC Single-cylinder Engine

Petro-Canada PEERLESS 3 Moly 322 Grease PEERLESS 3 Moly 322 grease is formulated for the protection of lowspeed, severe heavy-duty applications where high temperatures and heavy loads are common.

• Protects pins, joints, bushings and bearings • Contains 3% molybdenum disulfide for enhanced load carrying capacity • Mechanical and thermal stability help maintain optimal lubrication properties in challenging applications • Extreme Pressure (EP) and Anti-Wear (AW) properties inherent in the thickener • Can extend component life in wet conditions

www.forconstructionpros.com/21772169

BKT AIROMAX AM 543 Mobile Crane Tire

Chicago Pneumatic CP86 Cordless Connected Nutrunner The CP86 series nutrunner is available with an app to provide instant performance feedback and better control quality processes in the field.

• Four models offer torque levels from 170 to 5,975 ft.-lbs. and come in the standalone CP86 variant and connected C and CQ variants with dedicated CPLinQ app • Constant tightening speed of up to 10 rpm • CPLinQ app provides access to real-time tool status and performance data • Compact, long-lasting 36V/2.5-Ah battery allows for extended use

The AIROMAX AM 543 radial tire is especially suited for cranes used in the construction sector, thanks to its enhanced traction and stability during pickup and transport.

• Designed and built specifically to face the challenges of demanding jobs when heavy loads are being transported on a range of surfaces • Robust steel structure and cutresistant compounds • Deep and knobby tread ensures performance on rough terrain and protection to the tire structure • Designed to resist severe stress of heavy loads and extreme conditions • Currently available in 385/95 R 24, 385/95 R 25 and 445/95 R 25 sizes in speed indices “E” and “F”

www.forconstructionpros.com/22031309

www.forconstructionpros.com/21940099

TRI 2

Versatile professional contracting tire for year-round use

The Vanguard 400 EFI/ETC horizontal shaft commercial gasoline engine features an electronic fuel injection (EFI) system that provides better fuel efficiency, improved overall performance and quick load acceptance.

• Easy all-weather choke-less starting • Electronic throttle control (ETC) system ensures smooth and consistent power with any load size or terrain type • Battery-free starting eliminates the bulk, weight and maintenance of a battery on board • Fully integrated cyclonic air cleaner with advanced AutoShed technology extends service intervals • 14-gross-hp version available for purchase in summer 2022

www.forconstructionpros.com/21508889

To learn more about Fleet Management products, visit www.forconstructionpros.com/directory.

H A K K A P E L I I T TA T R I Extend the allseason capabilities of your machinery

GROUND KING

Combining all-terrain mobility with on-road performance

Deutz TCD 2.2 L3 Engine The TCD 2.2 L3 three-cylinder engine features a DVERT oxidation catalyst (DOC) that enables maintenance-free, Tier 4 operation.

• Features a common rail fuel injection system and cooled, external exhaust gas recirculation with or without turbocharging and charge air cooling • 134-cu.-in. displacement • Generates 75 hp at 2,600 rpm and maximum torque of 207 lbs.-ft. at 1,600 rpm • Extremely compact design for ease of installation • Includes a modular exhaust aftertreatment system (EAT) configuration

www.forconstructionpros.com/21115904

800.565.2525

nokianheavytyres.com

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

37

LIFT EQUIPMENT Products Hy-Brid Lifts PS-1930 Scissor Lift

Caterpillar TH514D Telehandler Gehl RS5-19 Telescopic Handler The 10,000-lb. RS5-19 compact telehandler features a 69-hp Yanmar naturally aspirated, Tier 4-certified engine and has a maximum lift capacity of 5,500 lbs.

• 19-ft. 1-in. maximum lift height with a 3,000-lb. lift capacity at full height • Automatic self-leveling fork system • Full-time four-wheel drive and twowheel, four-wheel and crab steering • Two-speed hydrostatic transmission enables a maximum travel speed of 15 mph • Dynattach Quick Attachment System

The TH514D has a rated load capacity of 11,021 lbs. and a maximum lift height of 45.5 ft.

• 100-hp C3.4B Tier 4 Final diesel engine and 4F/3R powershift transmission • Closed-center, load-sensing hydraulic system with variable-displacement, axial piston pump and flow-sharing valves • Four-wheel-drive system uses heavy-duty axles with planetary reduction hubs, front limited-slip differential and dual-axle braking • Ride control system dampens boom movement during travel and a boom-float system allows the boom to automatically follow terrain contours • Single multi-function joystick

www.forconstructionpros.com/12318344

www.forconstructionpros.com/10078434

The Pro Series PS-1930 has a platform height of 19 ft. and working height of 25 ft., and includes a 60” x 24” platform with a 30-in. slide-out extension.

• Includes a 650-lb. lift capacity, low step-in height and a compact, lightweight design (less than 2,000 lbs.)

• Fits through standard doors without fold-down rails and in standard elevators • Rated for indoor and outdoor use with upper controls to switch between indoor and outdoor modes • Outdoor option rated for use at a maximum wind speed of 28 mph • Features non-fold-down rails and the LeakGuard fluid containment system

www.forconstructionpros.com/21111086

Magni TH Telehandler Range The TH range of telehandlers includes six 75- and 100-kW models with high-tensile steel booms that include an automatic attachment system, plus the TH 6.20 and TH 5,5.24 offer a side-shift system (+/- 5°).

• Deutz Stage V/Tier 4 Final engine with electronic management system • Four-wheel drive and four-wheel steering • Stabilizers provide ability to pivot, deploy quickly and provide a stable position with an auto-leveling system • Axles include a leveling system with +/- 8° of adjustment to enable work on irregular terrain • FOPS/ROPS cabin features an adjustable steering column and a 7-in. touchscreen display

www.forconstructionpros.com/21232620

Pettibone Extendo 1056X Telehandler The 10,000-lb.-capacity Extendo 1056X can reach lift heights of 56 ft.

• 74-hp Cummins QSF 3.8 Tier 4 Final diesel engine or optional 74-hp Deutz or 117-hp Cummins engine • Four-section boom with bottommounted external extend cylinder and cylinder cushioning • Full-time four-wheel drive with a limitedslip front axle differential • Dana VDT12000 Powershift transmission • Cab comes with ergonomic seat, pedal, joystick and steering wheel positions, plus an analog/LCD gauge cluster or optional 7-in. digital display with integrated backup camera

www.forconstructionpros.com/21127573

JLG Hi-Capacity HC3 Boom Lifts The Hi-Capacity HC3 boom lifts include the 400S, 460SJ, 600S, 660SJ and 860SJ HC3 models, while the 450AJ, 600AJ, 800AJ and 800S HC3 are set to roll off production lines in the coming months.

• Platform heights range from 40 to 86 ft. with 750- and 1,000-lb. restricted capacity zones and a 660- or 500-lb.

(800S and 860SJ) unrestricted zone • Rated for three occupants with tools in all three capacity zones • Load-sensing system automatically keeps operation within allowable work envelope • LED displays improve visibility of the platform and ground consoles during operation • Chassis tilt alarm alerts operator when machine is on a slope that exceeds 5°

www.forconstructionpros.com/21200325

Terex TRT 80US Rough-terrain Crane The 88-ton TRT 80US features the TEOS Terex Operating System with an improved interface that increases efficiency.

• Five-section boom with three telescoping modes and two-section jib for reaching up to 195 ft.

• 148-ft. maximum main boom • Four steering modes • Extra-wide and tiltable cabin • Ergonomic and customizable electro-proportional joysticks

Haulotte PULSEO MEWP Lineup The HS4390 E and HS5390 E PULSEO fully electric mobile elevating work platforms can easily conquer obstacles and climb slopes up to 45%.

• Work platform reaches 19 ft. with both extensions deployed and can lift up to 1,650 lbs. of load and up to four workers • Include an oscillating axle, four-wheel drive axles and manual differential wheel lock • Can be deployed on slopes up to 5° with outriggers • Include the Activ’Lighting System, Activ’Shield Bar System and Activ’Energy Management System • 48V battery pack enables a full day of work

www.forconstructionpros.com/21202288

LGMG T72J High-capacity Boom Lift The ANSI A92.20-compliant T72J rough-terrain boom lift has a platform height of 72 ft. with a working height of 78 ft. and a horizontal outreach of 57 ft.

• 661-lb. unrestricted and 992-lb. restricted dualcapacity platform • Standard 8-ft.-long, 3-ft.-wide platform accommodates three operators with the maximum load • Tier 4 Final-compliant engine with throttle controlled by the onboard system to automatically reduce noise and fuel consumption • Includes 4x4 drive, rough-terrain tires, oscillating axles and a 45% climbing ability

www.forconstructionpros.com/21615418

www.forconstructionpros.com/21509224

38 EQUIPMEN T TODAY | March 2022

www.ForConstructionPros.com

UNRESTRICTED CAPACITY 900 lbs Platform Capacity With a 7' 7" Basket 360° Continuous Rotation

See our full range of aerial work platforms and more at manitou.com

LIFT EQUIPMENT Products Xtreme XR1585-C Fixed Boom Telehandler

Liebherr LTM 1110-5.2 Mobile Crane The 121-ton LTM 1110-5.2 five-axle mobile crane features a new driver’s cab, the LICCON3 next-generation crane control system and a ZF TraXon DynamicPerform gearbox.

• 197-ft. telescopic boom and variable axle loads enable maximum mobility • Includes touchscreen function on the large display in the superstructure cab • Cab includes a multifunction steering wheel, improved instruments and modules, new displays and an automatic heating and climate control system • DynamicPerform clutch module delivers almost zero wear starting and maneuvering for the modular gearbox

www.forconstructionpros.com/21940413

LiuGong S-DE Series Scissor Lifts The S-DE Series scissor lifts offer maximum work heights from 18 to 46 ft., maximum platform heights from 12 to 39 ft. and rated load capacities of 529 to 706 lbs.

• Driveable at full height • Maximum gradeability of 25% • Intelligent control system provides realtime monitoring of equipment status • 220V power supply with intelligent charging system to extend battery service life • Feature adjustable extension platforms, proportional control, pothole inspection and protection system, folding guardrails and self-lubricating sleeve

www.forconstructionpros.com/21940350

The 65,500-lb. XR1585-C utilizes a five-section boom design to deliver a maximum lift height of 85 ft. and a 67-ft. maximum forward reach.

• Capable of lifting loads up to 15,000 lbs.

• Fixed, fork positioning, swing or side tilt C-class carriages available • Standard wide-stance outriggers ensure maximum stability • Comes with a 173-hp Cummins 4.5L Tier 4 Final diesel engine, 49-gpm hydraulic flow, 100-gal. fuel tank, fully-rated boom lift point and long-life boom rollers • Choice of open cab, enclosed cab and enclosed cab with heat and air conditioning

www.forconstructionpros.com/21497167

Grove GHC110 Telescoping Crawler Crane The 110-ton-capacity GHC110 features a five-section main boom extension of 40.4 ft.-153.4 ft.

• Maximum tip height is 162 ft. or up to 212 ft. with standard 49.2-ft. bifold offsettable swingaway boom extension • 100% pick-and-carry capability across its standard 0.6°, 1.5° and 4° load charts • Main and auxiliary hoists offer a maximum line pull of 19,404 lbs.

• Features an in-cab camera to monitor hoist movement, 20° cab tilt plus three additional cameras • Hydraulically extendable and retractable crossmembers offer three potential track spans

www.forconstructionpros.com/21565171

Skyjack SJ9664 RT Scissor Lift The SJ9664 RT rough-terrain scissor lift has a 70-ft. working height and includes SMARTORQUE technology.

• Axle-based four-wheel-drive system enables use of a smaller Kubota Tier 4 Final engine with the same on-site performance • Reinforced scissor stack promotes increased rigidity • Self-centering scissor design supports the expansive workspace and optional dual extension decks • Include simplified e-lowering, an onboard diagnostic display and optional ELEVATE telematics solution

www.forconstructionpros.com/21307310

Ranko Faresin 6.26 Standard and Full Electric Telehandlers The Faresin 6.26 compact telehandler and 6.26 full electric version are built on the same framework and offer a 5,732lb. maximum capacity and just over 19 ft. of lift height.

• Standard version includes a Yanmar Tier 4 diesel engine, hydrostatic transmission, four-wheel drive with three steering modes and optional creeper mode • Electric version has a six-hour battery life, standard onboard charger (13 hours) plus fast charging capability (2.5 hours) • High-strength chassis and boom • Queen Cab offers heating and ventilation, dashboard with color display, built-in diagnostics, mechanical/ electro-proportional control and 360° visibility

www.forconstructionpros.com/21563126

Manitou TJ 85 Straight Boom Mobile Elevating Work Platform MEC Xtra-Deck for Boom Lifts Availability of the Xtra-Deck has been extended to MEC boom platforms, providing an additional 20 in. of height with three telescopic guardrails so users can reach confined places without standing on the midrails.

• Guardrails on three sides slide up and lock into place to meet regulation height • Narrow width for access into tight areas • Quickly deploys and offers a 250-lb. capacity for one person • Can be quickly stowed and guardrails retracted to their original position • Able to be field fitted to any MEC Boom platform regardless of size

www.forconstructionpros.com/21614952

40 EQUIPMEN T TODAY | March 2022

Tadano AC 4.070(L)-1 All-Terrain Crane This four-axle crane has a lifting capacity of 75 US tons and two boom lengths.

• 171-ft. six-section main boom with a 12,786-lb. capacity at full boom length or optional 144-ft. main boom • Maximum tip height of 233 ft. and maximum radius of 170.6 ft.

• Manual or stepless hydraulic adjustment capabilities enable use at 0° to 40° • AML-F crane control system with automatic lifting capacity selection function • Lift Adjuster reduces load swinging

The TJ 85 offers a platform height of 84 ft. 6 in., platform capacity of 530 lbs. unrestricted/ 770 lbs. restricted and horizontal outreach of 70 ft. 4 in.

• Continuous 360° turret rotation allows for easy positioning • All hydraulic movements proportionate to allow for smooth operation and precise adjustments in tight areas • Four simultaneous movements enable increased productivity • Constant rotation control means platform rotation speed varies according to how far the boom is extended • Include a front oscillating axle, four-wheel drive and two-wheel, four-wheel and crab steering modes • Easy Manager provides ability to manage unit location, maintenance cycles and service warnings with the telematics system

www.forconstructionpros.com/21091689

www.forconstructionpros.com/21565150

www.ForConstructionPros.com

Products L IF T EQU IPMENT

Merlo R70.24 S-Plus and R70.28 S-Plus Roto Telehandlers JCB 512-83R Rotating Telehandler Genie S-60 J Telescopic Boom Lift The S-60 J has a 60-ft. 10-in. platform height, 40-ft. 6-in. horizontal reach, 660-lb. platform capacity (unrestricted), single-envelope design and 6-ft. jib.

• Compact chassis and low-weight design (16,650 lbs.) keep ground pressure low • Four-wheel drive with active oscillating axles and standard rough-terrain, foamfilled tires ensure easy maneuverability • 24-hp Kubota D1105 Tier 4 Final engine • Digital load sense technology for accurate load weighing and zero-load field calibration • Includes the Lift Guard Contact Alarm system, CAN-based control system with intuitive control system layout and digital LCD screen at the ground controls

www.forconstructionpros.com/21259648

Enerpac EVO-P Pump-Per-Point Synchronous Lift System The EVO-P Pump-Per-Point Synchronous Lift System provides fast, safe heavy lifts with accuracy up to 1mm.

• Dedicated two-stage, full-flow pumps • Designed for high-tonnage cylinders • Enables up to four times faster cylinder retraction • Advanced control for smooth, stable lifts • Flexible operation with multiple cylinder sizes on the same lift • Range of pump options from 5 to 20 hp

www.forconstructionpros.com/22031440

The 512-83R has a maximum lift capacity of 12,000 lbs. and a maximum working height of 83 ft.

• 145-hp JCB EcoMax engine • Two-speed hydrostatic transmission with a top travel speed of 25 mph • Auto one-touch stabilizer deployment, stowage and leveling enables rapid setup • Features enhanced lift end cycle times and high auxiliary flow rates for efficient winch work • Remote control lift-end operation and available aerial access platforms enable use as a telehandler, crane and mobile elevating work platform

www.forconstructionpros.com/21771684

The R70.24 S-Plus and R70.28 S-Plus Roto models deliver a 15,400-lb. weight capacity and 80- and 92-ft. lift heights.

• 170-hp Iveco four-cylinder diesel engine • Hydrostatic transmission with electronic Eco Power Drive control and three steering modes • Load-sensing and flow-sharing hydraulics supply multiple, simultaneous boom movements with rapid 360° turret rotation for precision load placement • 20° tilting cab with 360° visibility, a touch-control SMART multi-functional armrest and two horizontal capacitive sensitive joysticks • Feature an Advanced Safety System, active suspension system and four independent, multi-positional stabilizers

www.forconstructionpros.com/22031424

Bobcat TL619 Telehandler The TL619 features a low-profile boom with a 5,500-lb. load capacity and a lift height of 19 ft.

• Advanced Tier 4, turbocharged, high-torque engine provides reliable cold weather starting and does not require a DPF or selective catalyst reduction • ECO, Smooth Drive, Dynamic Drive, Flex Drive and Advanced Attachment Control operation modes • Redesigned cab offers enhanced ergonomics, a suspension seat, efficient HVAC system and easy to read, automotive-style instrumentation panel • Single intuitive joystick controls travel direction, lift and tilt functions, boom extension and auxiliary hydraulics

www.forconstructionpros.com/21940262

Snorkel A46JRTE Lithiumpowered Boom Lift The A46JRTE comes standard with three 111Ah (5.75-kWh) lithium-ion battery packs that deliver extended duty cycles per charge.

• Single charge lasts more than one week in rough terrain and over two weeks in light use on elevation jobs with minimal driving • Four-wheel drive coupled with AC electric motor’s higher torque for increased traction and improved roughterrain performance • Produces 62% less jobsite noise and has no engine fan for less dust generation • Minimal battery and electrical system maintenance required

www.forconstructionpros.com/21735044

Sinoboom 4655E Plus Scissor Lift The ANSI A92-compliant 4655E Plus electric scissor lift features a 772-lb. rated capacity, a max outdoor platform height of 45 ft. 3 in. and an indoor platform height of 27 ft. 11 in.

• Wider scissor stack for enhanced stability • Standard maintenance-free batteries • Swing-out trays for easy service access • Bumper rails protect paint and decals • Side and rear forklift pockets allow for easier transportation • All wires and switches color-coded and labeled for easy identification and troubleshooting

www.forconstructionpros.com/21940357

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

41

ROADBUILDING Products

BOMAG BM 500/15-2 and BM 600/15-2 Milling Machines The BM 500/15-2 and BM 600/15-2 feature a re-engineered vibration-isolated operator’s station with a suspension seat and a 45° slewing angle for enhanced visibility to the left cutting edge and front/rear of the machine.

• Max milling widths of 19.7 and 23.6 in.

• Four extra cutting tools plus optimal arrangement of tools across the drum deliver uniform, low vibration milling and smooth milled edges • 7-in. full graphic color display • Available in three- and four-wheel designs • Maximum milling speed for four-wheel configurations is increased by more than 25% for both models

GOMACO GP3 Slipform Paver The GP3 can slipform up to 30 ft. wide, is available as a two-track or four-track paver and now includes self-programming valves that can automatically react and self-adjust to the dynamics of the machine.

• Paver elevation, steering, pivoting, travel control, anti-slip positive traction of tracks and more automatically corrected based on operator adjustments • Navigator display software brings all G+ paver accessories together for easy control and monitoring on an optional touchscreen display • Vibrator monitoring system provides ability to monitor, control and diagnose each vibrator via the touchscreen display

Miller Formless M-6040 Concrete Slipform Paver The M-6040 has a dual telescoping main frame and variable width paving mold that extends from 8 ft. 3 in. to 16 ft. 5 in. wide without frame or mold inserts.

• Bolt-on mold inserts can expand width to 20 ft. in under an hour • Can pave up to 15 3/4 in. deep • 176-hp Caterpillar C4.4 Stage V turbocharged, air-cooled diesel engine • Four hydraulically actuated square-toround leg columns • Electronic control panel includes two steer sensors and steer wands, four grade proportional sensors with grade wands and proportional slope control

www.forconstructionpros.com/21993334

Topcon Millimeter GPS with Robotic-based Solutions System solutions are designed to support curb and gutter paving by maintaining productivity and accuracy, even when facing difficult GPS coverage issues.

• Millimeter GPS concrete paving solution can be used with the GT-1200 series standalone robotic total station or selfleveling LN-150 robotic layout navigator • Temporarily turns paver control over to a robotic instrument when GPS coverage is blocked • Both instruments offer support for a prism solution to quickly switch between Millimeter GPS and LPS

www.forconstructionpros.com/21551371

www.forconstructionpros.com/12167412

www.forconstructionpros.com/21121832

Leica MC1 for Stringless Paving

Volvo P5110B and P5170B Asphalt Pavers The P5110B tracked and P5170B wheeled 8-ft. asphalt pavers are powered by the Volvo D6 Tier 4 Final engine.

• Large-capacity hopper ensures continuous paving, and durable rolled wings help cut material buildup and cleaning time • UltiMat160 screed features extensions that can adjust paving width hydraulically from 8 to 16 ft.

• Optional bolt-on extensions enable paving up to 18 ft.

• Three-phase AC power screed heating system creates fast screed heat-up times with a lower amperage requirement

www.forconstructionpros.com/21108632

Case E Series Compact Rollers Seven compact vibratory rollers range from 33.5 to 43.9 hp and from 4,920 to 9,520 lbs. and come in double-drum and combination configurations with drum widths from 39 to 54 in.

• Redesigned operator interface includes an electronic travel lever and rpm settings, drive settings, sprinkler system controls and more at the operator’s fingertips • Operation mode selector to select from loading, working and transport modes • Soft drive setting provides a smooth ride during asphalt compaction and optional hard drive setting enables swift turns • Selectable dual vibration frequencies

www.forconstructionpros.com/21120047

The MC1 asphalt paving solution enables operators to precisely place cement-treated base course or start paving directly without waiting for manual stakeouts.

• Operator can change height offset directly on the run screen • Fully compatible with iCON site and ConX • Uncluttered and user-friendly interface with the latest updates included • Terrain models for milling and asphalt pavers • Smartspare TPS feature for the handling of spare TPS tracking and lock to target

www.forconstructionpros.com/21120984

Wacker Neuson RD12 Series Tandem Rollers The 1.2-ton RD12 series vibratory rollers include improved visibility and curb clearance and easier service access.

• 34.5-in. drum with front drum dynamic centrifugal force of 3,400 lbs.

• RD12A powered by a 20.8-hp Honda gasoline engine and RD12K equipped with a 21.6-hp Kubota diesel engine • Fully recessed hydraulic motors • Tapered frame and hood design provide visibility to the drum edges and more comfortable operation • Ergonomic operator’s platform with water and vibration functions integrated into joystick control and convenient access to fuel and water gauges

www.forconstructionpros.com/21047045

Caterpillar AP455 Asphalt Paver The 8-ft. AP455 Mobil-trac paver offers a compact size and small footprint to simplify maneuverability in tight spaces.

• Standard paving width using SE47 V screed or SE47 FM ranges from 8 to 15 ft. 6 in.

• Paving depth of up to 10 in.

• 14-in.-diameter augers efficiently move material through the auger chamber at narrow and wide paving widths • Provides ability to control each material feed sensor when using cut-off shoes or when paving at narrow widths • Simplified menu structures provide single-touch activation for screed heat, washdown and ventilation systems from the main menu

www.forconstructionpros.com/21821472

Wirtgen W 240 CR/W 240 CRi Cold Recycler The helical design of the W 240 CRi milling and mixing rotor transports mix to the center and then to the paving unit via the primary conveyor, where the spreading auger distributes it evenly in front of the variable paving screed.

• Suited for both the down-cut process (recycling) and up-cut process (milling) • HT22 quick-change toolholder system • Multiple Cutting System MCS EXTEND enables different working widths • Injection system features adjustable injection pressure, process water monitoring and automatic self-cleaning and flushing feature

www.forconstructionpros.com/21122219

42 EQU IPMEN T TOD AY | March 2022

www.ForConstructionPros.com

ROADBUILDING Products Trimble Roadworks Paving Control Platform for Asphalt Compactors The Roadworks Paving Control Platform for Asphalt Compactors provides accurate control of the compaction process while reducing unnecessary passes that can result in over compaction.

• Asphalt temperature mapping provides color-coded data to allow operators to compact at the correct temperature • Compatibility with Trimble WorksOS and WorksManager software enables construction-ready models to be sent from office to machine and remote monitoring of job progress and activity • Productivity data collected from machine automatically synced back to the office

www.forconstructionpros.com/22031112

Minnich A-4SCW Dowel Pin Drill with i-QAN System The A-4SCW on-slab self-propelled wireless dowel pin drill features the I-QAN remote communication system, which offers drill monitoring, diagnostics and remote access to field support via an iPad tablet, iPhone or Android device.

• Offers a service weight of 3,260 lbs. and a maximum hole depth of 18 in.

• Drills automatically retract and shut off when the hole depth has been reached • Remote control with joystick controls speed, steering, direction of travel and a dust collection on/off switch • Magnetic feed sensor prevents the drill from traveling if the slider is not completely retracted due to the drill steel becoming stuck in the concrete

www.forconstructionpros.com/21121079

Dynapac CC1300VI and CC1400VI Asphalt Rollers The double-drum CC1300VI and CC1400VI provide high-frequency compaction with a choice of frequencies (3,240/2,940 vpm), depending on conditions and applications.

• Available dual amplitude (0.02/0.007 in.) function • Kubota Tier 4 Final engine with ECO mode • Optional dual edge pressers, asphalt temperature meter, front right-mounted edge presser/edge cutter, dual front right and left edge presser/edge cutter and rearmounted chip spreader • Available combi-version includes four static rubber wheels at the rear

www.forconstructionpros.com/21259834

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

43

WORKSITE EQUIPMENT Products JCB RS Generators

Jenny W11HGB-30P Wheeledportable Compressor The W11HGB-30P two-stage wheeledportable air compressor features an 11-hp Honda GX-Series gas engine with electric start and a high-capacity “W” pump.

• Produces 21 cfm at 100 psi or 17.6 cfm at 175 psi • 30-gal. ASME-certified air tank with a durable powder coat • Belt driven with a large flywheel and special unloading valves for easy start-ups and extra cooling • Includes two fully pneumatic tires and convenient lifting handles

www.forconstructionpros.com/10746036

Cummins C12D6RE Mobile Generator Set The 12-kW C12D6RE is powered by a Tier 4 Final-certified, four-cycle, liquidcooled diesel engine and can operate reliably across extreme temperatures, heavy airborne dust and highly humid conditions ranging from -20° to 120° F. • Enclosure incorporates weatherproof sound attenuation • Sound-controlled housing covers the cooling system and muffler, further simplifying the installation process • Features a rugged, robust by design and heavy-duty trailer • Built-in self-diagnostic capabilities simplify troubleshooting

www.forconstructionpros.com/21122995

Geotab GO RUGGED Fleet Tracking Device This scalable, flexible and customizable off-road fleet solution can capture rich data on equipment position, fuel use, idling and more.

• Delivers accurate intelligence for real results • MyGeotab fleet management platform integrates with AEMP and third-party devices • IP67-rated device with LTE connectivity lets you monitor assets out on the worksite in real time • Manage both off-road and on-road assets together • Open platform and Marketplace offer a variety of third-party solution options

www.forconstructionpros.com/21093316

The RS towable generator range includes five Tier 4 Final-compliant models with prime power output of 56 to 500 kW (70 to 625 kVA).

• Designed to be towed with operating weights from 7,239 to 25,209 lbs.

• Easy to access controls with automatic mains failure (AMF) and synchronizing capability, with touchscreen controls on larger models • Automatic voltage regulator adjustment can be made from the front of the control panel

www.forconstructionpros.com/21123054

Ditch Witch AT40 All Terrain Directional Drill The AT40 All Terrain horizontal directional drill features an advanced, two-pipe All Terrain drilling system that provides enhanced torque to improve downhole operation.

• Stage V diesel engine • Offers up to 40,000 lbs. of thrust and pullback • Inner-rod design provides a flush system that improves tool joint durability and steering in hard rock conditions • All Terrain connection reduces collar damage risk to further improve steering and optimize fluid flow • 70-gpm, 1,100-psi mud pump increases fluid flow from the pump to the swivel

www.forconstructionpros.com/20977400

Hilti SDS-Max Combination Hammer Drill The 22-lb. TE 70-ATC/AVR, SDS-Max combination hammer includes Active Torque Control (ATC) technology, which stops the tool body from spinning uncontrollably if the drill bit jams.

• 10.7 ft.-lbs. of single impact energy and full hammering frequency of 2,830 impacts per minute • TE-YX bits and TE-YPX flat and pointed chisels • Brushless motor • Optimum hammer drilling range of 25/32 to 2 5/32 in.

• Includes Active Vibration Reduction (AVR), Detachable Power Cord Chiseling and Power Reduction

www.forconstructionpros.com/21205487

ANA PDS400SC-6E1 Air Compressor The AIRMAN 400-cfm portable compressor has a builtin aftercooler that cools the discharge air through a radiator and removes 70% of the water and oil from it.

• Standard powder-coat paint, stainless steel hardware, corrosion-proof air intakes and an anti-water intrusion door seal keep water and debris out and noise in • Curbside service and maintenance with convenient external fluid drains provide ease of service and safe operation

Somero S-22EZ Laser Screed The S-22EZ features 360° machine rotation, a 20-ft. telescopic boom and a choice of pivoting screed heads.

• Offers zero-turn drive capability with a 360° steering angle • Customized OASIS laser control system • Comes with a full-color LCD display with integrated diagnostics, Quick GradeSet System, automatic throttle and Programmable Quick Pass • Redesigned EZ Clean Head reduces cleanup time and improves long-term maintenance • Options include a 12- or 14-ft. head width, roller plow, onboard pressure washer with hose reel, operator heat, spray bar and Floor Levelness System

www.forconstructionpros.com/21136302

www.forconstructionpros.com/21203803

Induction Innovations Inductor ALFe Induction heaters ALFe 3.5 and ALFe 5.0 induction heaters are capable of heating aluminum and steel to help release seized parts and panel bond adhesives.

• 230V/16A/P1 (ALFe 3.5) or 208V/20A/ P3 (ALFe 5.0) • ALFe 3.5 offers a 9-minute duty cycle and the ALFe 5.0 has a 30-minute duty cycle • Include an LED light indicator and safety shutoff

www.forconstructionpros.com/21108959

44 EQU IPMEN T TOD AY | March 2022

BOSS MechanX 150 Gas Compressor/Generator/Welder The 400-lb. MechanX 150 portable compressor/generator/welder comes standard with a 14-hp Kohler four-cycle, OHV gasoline engine with electric-start capabilities and automatic engine idle.

• Heavy-duty, single-stage, cast iron, twin-cylinder compressor delivers up to 13.1 cfm (17.9 cfm displaced) at 100 psi • Welder features an auto resettable thermal overload breaker and provides 150 amps at 100%, 180 amps at 65% and 210 amps at 10% • Generator provides 4.0-kW AC continuous output • 10-, 22- and 28-gal. remote air tank options

www.forconstructionpros.com/21124183

www.ForConstructionPros.com

WORKSITE EQUIPMENT Products Aquajet Aqua Cutter 410V Hydrodemolition Robot The 2,756-lb. Aqua Cutter 410V electric-powered hydrodemolition machine has a free-standing reach of up to 13.2 ft. and is able to work horizontally, vertically or overhead.

• Uses 15,000- to 40,000-psi water jets and a range of attachments for efficient concrete removal or surface preparation • Robot’s stroke can be adjusted to control removal depth and vary the water pressure to match the application • Optimal lance control and Equal Distance System enable easy removal of materials in corners • Radio remote control (wireless or hard wired)

www.forconstructionpros.com/21198208

H E AT

EDCO DS-20 Downcut Walk-behind Saw The DS-20 concrete/asphalt saw has a 20-in. blade, allowing users to cut 7 3/4 in. deep without the need for a larger self-propelled unit.

• 13-hp Honda GX390 gasoline engine with heavy-duty anti-vibration mount • Throttle system features a positive locking mechanism to ensure wide-open throttle when engaged during sawing • 7-gauge steel blade guard with welded protective segment flap • Easy turn crank for lowering and raising the blade in and out of the cut • Includes a heavy-duty 7-gauge steel laser cut frame, large screw-type depth control, wide T-handles with rubber grips and solid-steel lifting handles

www.forconstructionpros.com/21111934

Mi-T-M Rotary Screw Singlestage Air Compressor The AR1-PK37-M rotary screw, singlestage, gasoline air compressor produces 115 cfm at 100 psi, and the 10 1/2-gal. fuel tank provides the extended run time needed on many jobsites.

• Compressor pump includes an integrated air/oil separator, integrated thermostatic bypass valve, banded four V-belt drive system, easy to read oil level indicator and high oil temperature shutdown • Electric-start gasoline engine with low oil level shutdown • Powder-coated steel frame with 1 1/4-in. roll cage, handle, four-point lifting hook, winch point and tie-down anchors • 15-in. pneumatic tires

P OW E R

L I G H TS

BASECAMP IS YOUR ESG SOLUTION! INNOVATIVE PRODUCT

GREEN CERTIFIED TECHNOLOGY

The first-ever Green Seal certified piece of construction equipment.

Qualifies for BIG US & Canadian Clean Tech Tax Incentives.

LOWEST OPERATING COSTS

Functional & Efficient 3-In-1 Design.

24/7 Smart Controls & Monitoring.

Built-in load bank extends engine life up to 25%.

CERTIFIED EMISSIONS REDUCTIONS

Reduce fuel, fuelling, and support labor by a whopping 60%!

Reduce (207) metrics tonnes of CO2 per season per unit.

www.forconstructionpros.com/12182624

VMAC Stacked G30 Rotary Screw Air Compressor The stacked G30 rotary screw compressor produces 30 cfm at 100% duty cycle and includes a 30-gal. air receiver tank, yet weighs less than 210 lbs.

• Footprint of just 2.5 sq. ft. at 38 in. tall, 20.5 in. wide and 18.15 in. deep including the belt guard • Fits neatly into the existing rear compartment of most service trucks or in the bed of a pickup truck • Powered by a Honda GX390 air-cooled, four-stroke OHV engine that is EPA and CARB compliant and includes a 1.6-gal. fuel tank • High duty cycle eliminates the need for a large air receiver tank

www.forconstructionpros.com/21110946

Allmand Maxi-Air 100, 375-DP and 400 Air Compressors



SMART



CONNECTED



CLEAN TECH

HEAT  POWER  LIGHTS

The MA100, MA375-DP and MA400 portable air compressors feature a heavyduty, oversized rotary screw airend designed to run at lower rpm for longer life and improved fuel efficiency.

• Developed for ease of use and easy starting • Tier 4 Final engines • Deliver powerful airflow from 100 to 400 cfm in all climate conditions • MA375-DP and MA400 designed to meet high-pressure application demands with the MA375-DP featuring a flexible dual pressure design

www.forconstructionpros.com/21047378

1 (855) 554 4344

thermalintelligence.com/ET

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

45

WO R KS I T E E QU I P M E N T Products Multiquip MQ Mikasa MVH508GH Reversible Plate Compactor

Ligchine SCREEDSAVER MAX PLUS The 4,800-lb. SCREEDSAVER MAX PLUS screed features the SwingBoom pivoting frame for up to 5 ft. 3 in. of side-to-side screed head movement with a pivoting boom member.

• 17-ft. boom extension with a 10-ft. highperformance screed head • Standard Topcon LS-B110 2D laser leveling system or available Topcon 3D mmGPS satellite control or LPS robotic 3D system • 24.9-hp Honda iGX800 gasoline engine • Two-wheel proportional hydraulic drive system and 90° manual pivoting undercarriage drive frame enable parallel to the pour driving capability • Can be fully operated via a revised wireless remote control system

www.forconstructionpros.com/21497280

TRUCE Software Contextual Mobile Device Management Platform The Contextual Mobile Device Management platform automatically adjusts access to mobile apps and features based on a given work environment and additional contextual indicators.

• Includes a web-based Management Console, mobile app and available Beacon technology • Employer defines how to protect employees based on location or proximity to high-risk areas or equipment, movement including speed, time of day or day of week and user or work group • Apps and functions that help employees are kept front and center, while those seen as distracting are temporarily hidden

www.forconstructionpros.com/21295111

Tenna TennaBLE Beacon Steel Puck The TennaBLE Beacon Steel Puck is suited for autonomously tracking the location of equipment parts, attachments, tools, trench boxes and more that get aggressive, high-impact use.

• Encased in steel and welded to asset for extra ruggedness • Sends out regular “heartbeats” that are recognized by the company’s mobile asset tracking apps for iOS and Android • App downloaded on smart device automatically identifies and records location of tagged assets when in range (approximately 100 ft.) and stores data • Non-rechargeable lithium metal battery provides long life (up to three years) even in extreme temperatures

www.forconstructionpros.com/21354432

The MQ Mikasa MVH508GH reversible plate produces 13,489 lbs. of centrifugal force and has a working width of 26 in. using standard extension plates.

• Easy starting Honda GX390 gasoline engine fitted with cyclonic air filtration • Hydraulic drive system ensures smooth directional control and consistent, reliable performance • Wrap-around shroud protects engine both in the trench and during transport • Swing-open design provides access to key service points for simplified maintenance • Can be fitted with the COMPAS system to manage compaction progress

www.forconstructionpros.com/21378223

Doosan DFP1520 Forward Plate Compactor The DFP1520 forward plate compactor is simple to use and maintain for operators of all experience levels.

• Generates 3,372 lbs. of maximum centrifugal force and has maximum vibration frequency of 100 Hz • Honda GX 120 engine • Weighs 185 lbs. and measures 19.7 in. wide • Service points accessible without tools • Optional rubber mat with no-tool installation, hour meter, transport wheels and water sprinkler system

www.forconstructionpros.com/22043358

Vermeer Ultra X3 Drilling System The Ultra X3 Drilling System for utility-sized horizontal directional drills (HDD) is designed with a non-torqued spline connection system and offers compatibility with a range of pilot bit and pullback configurations.

• Provides ability to swap out tooling quickly with two knock-out dowel pins, plus capability of reaming directly from the transmitter housing • Standard API rear connection plus works with quick-connect systems • Capable of handling the torque of reaming diameters up to 10 in. in most conditions from the transmitter housing • Available in three sizes covering the company’s HDD models rated from 10,000 up to 40,000 lbs.

www.forconstructionpros.com/21735384

Miller Electric CST 282 Stick/TIG Welder The 34.6-lb. CST 282 stick/TIG welder provides 280 amps of welding performance and includes a digital meter for precise control when presetting or monitoring welding amperage.

• Voltage reducing device technology lowers output when operator isn’t welding • Push-button interface enables a glance at the front panel to see how the machine is set up • Auto-Line technology delivers consistent, powerful arcs using single- or three-phase electrical service from 208 to 575 volts • Universal output connector system can be used with both Tweco and Dinse-style connectors

www.forconstructionpros.com/21415575

Enerpac Cordless Bar Cutter The battery-powered Cordless Bar Cutter is a portable, convenient and safe solution where external power is not available or where spark risk is a concern.

• Rotatable head (360°) can be positioned for optimal access to the application • Can quickly cut through up to #6 rebar in five seconds • Can make up to 125 controlled, uniform, repeatable shear cuts on a single charge • Bar held in place behind a protective guard for safety • Trigger Guard helps prevent accidental activation • Comes with two batteries and a charger

www.forconstructionpros.com/21403358

46 EQUIPMEN T TODAY | March 2022

Sullair Mid-Range Series Air Compressors Verizon Connect Asset Tracker for Reveal Platform Designed for customers running their mobile business on the Reveal fleet management platform, this asset tracker device offers a compact, discreet solution that is easy to conceal, self-install and self-manage.

• Helps to reduce theft, improve equipment utilization and billing and reduce equipment downtime • Replaceable battery extends the life of the device and its value • Enables users to locate and manage equipment, vehicles, drivers and jobs online through the Reveal platform or Spotlight app

www.forconstructionpros.com/21497181

www.ForConstructionPros.com

The Mid-Range Series of Tier 4 Final portable lubricated rotary screw air compressors incorporates electronic spiral valve technology, which matches air supply to demand.

• Choice of a Caterpillar 7.1L or Perkins 1206J Tier 4 Final engine • Features include a 23-Series variable capacity air end, 7-in. Sullair Touch Screen (STS) and multiple service doors with push-to-close latches • 800HH/900H model delivers 800 to 900 cfm at 150 to 200 psi and the 920H/1100 model delivers 920 to 1,100 cfm at 100 to 150 psi • Optionable Airlinx for telematics and remote monitoring capabilities

www.forconstructionpros.com/21283152

Products WORKS ITE EQU IPMENT

Allen PRO446X Walk-behind Trowel The 404-lb. PRO446X heavy-duty, high-speed walk-behind trowel comes with an efficient helical gearbox that can tackle demanding projects.

• Variable torque converter clutch allows for lowspeed torque and high-speed finishing • Plow handle design puts operator at ease when pitching the blades to a height of 28° to 30° • 46-in. four-blade rotor offers rotor speeds up to 225 rpm • Comes with a heavy-duty frame, super-duty trowel arms and spider and lifting point for easier transfer • 12-hp Honda GX390 gasoline engine

www.forconstructionpros.com/21551493

Makinex Mobile Charging Pod The lightweight Mobile Charging Pod (MCP) is a secure storage pod that provides a safe way to store power tools, chargers, battery banks and more.

• Each of the six lockers also includes GFCI-compliant outlets to safely charge batteries while storing them • Compatible with various lock brands and styles, from thumbprint or Bluetooth readers to standard key or combination cut-resistant locks • Four lockable caster wheels make it easy to maneuver around jobsites or workshops • Four lock joints secure it to any building or fixture

www.forconstructionpros.com/21809069

Minnich Control Speed Concrete Vibrator

Trimble Construction One Management Platform

The Control Speed Vibrator (CSV) is a lightweight, durable, electric flex shaft concrete vibrator controlled through connectivity.

• Operator can use Bluetooth and the Minnich app on an iOS or Android device to choose between set speeds of 6,000, 8,000, 10,500 and open vpm • Maintains preset speed as the concrete load changes • 15-amp (115-volt) universal motor drives a full line of the company’s shafts and heads and comes with a quick disconnect to adapt to many other vibrator brands • Soft start feature saves energy and mechanical wear on motor and power system

www.forconstructionpros.com/21722810

www.forconstructionpros.com/21710799

TT Technologies Grundodrill 28N Directional Drill The Grundodrill 28N directional drill rig offers 62 lbf. of thrust and pullback, 8,110 lb.-ft. of torque and a bore length of 1,640 ft.

• Five-position swivel cabin provides an optimum viewing of all operations • Two multi-function joysticks offer total control of boring and driving functions • High-resolution touchscreen display delivers real-time bore data and operational performance

www.forconstructionpros.com/21980844

Trimble Construction One is a connected, cloud-based construction management platform that drives speed, efficiency and accuracy at each phase of the construction project life cycle.

• Connect data from the planning phases of a project to the project actuals for more predictable construction outcomes • More efficiently do project work and map that data back to the project for optimal resource utilization and cost savings • Brings financial management, business operations management, job costing, payroll and procurement together with ongoing project completion rates to ensure greater overall efficiency and project profitability

MBW ScreeDemon Wet Screed The ScreeDemon ergonomically-friendly wet screed is powered by a M18 REDLITHIUM battery for zero emissions and quieter operation, making it suited for indoor work.

• Lights improve visibility in darker work areas • Clamp system makes assembly and disassembly fast and easy • Sealed exciter requires no maintenance • Reduces hand/arm vibration by up to 50% to 90%

www.forconstructionpros.com/21194240

NEW! Generators equipped with Topcon Point Manager This plug-in for Revit and AutoCAD provides a complete office-to-field workflow for contractors to simplify design and as-built data exchange.

• Designed to automate point creation and easily import and export layout files to and from a robotic total station • Allows users to automatically create multiple points in 2D/3D drawings from within the design software for layout in the field • Lay out points, run deviation reports and send completed layout files to update design model to match as-build conditions • Cloud-connected MAGNET workflow enables BIM personnel or CAD teams to immediately share information to and from field crew using a layout device

www.forconstructionpros.com/21232829

AMS-Merlo DBM 3500 Cement Mixers The compact, self-contained DBM 3500 has a 1,321-gal. drum that delivers 4.6 cu. yds. of concrete, plus a self-loading bucket that handles up to 25 cu. ft. of aggregate at each load cycle.

• Pump moves 66 gpm of water into drum, enabling up to 37.7 sq. ft. of concrete to be made in less than 15 minutes • Can discharge concrete up to 330° around the machine • Features a 100-hp Tier 4 engine, 4WD with three steering modes and a hydrostatic transmission • Spacious, ROPS-certified cab with front controls for driving and a seat that spins 180° to access the rear controls to manage the mixing drum and bucket

www.forconstructionpros.com/21549889

www.ForConstructionPros.com

POWERED BY

3 YEAR WARRANTY

Inverters up to 8000-Watt ChoreMaster® Series up to 10000-Watt

This new series of generators from Mi-T-M come equipped with CO detection and are designed to provide maximum power. They feature Mi-T-M branded engines that are built with high-quality components for optimum performance.

www.mitm.com | 800-553-9053

March 2022 | EQ U I P MEN T TO D AY

47

WO R KS I T E E QU I P M E N T Products Wacker Neuson Single-direction Vibratory Plates

Brokk 300 Demolition Machine with SmartConcept Technology

This line of vibratory plates includes two models with Honda GX120 gasoline engines and two models powered by the BP1000 lithium-ion battery.

• Produce 2,473 and 2,923 lbs. of centrifugal force and have 13.8- and 15.8-in. baseplate widths • Optimized baseplate design with angular side edges • Responsive guide handle enables easy, comfortable operation while reducing hand-arm vibration • Include a large lifting eye and wide carrying handles • Available with a large-capacity water tank for asphalt applications

The Brokk 300 includes SmartConcept technology for improved power management, reliability, maintainability and ergonomics.

• Three-part arm extends to 21 ft. vertically and 20 ft. horizontally plus rotates 360° • Measures just 47.2 in. wide but can handle attachments weighing up to 1,102 lbs.

• SmartDesign extends machine life and eases maintenance due to 70% fewer cables and hardened components • SmartRemote remote control box offers adjustable straps, intuitive controls and professional-grade radio technology with a 984-ft. working range

www.forconstructionpros.com/22005961

Kaeser Mobilair M59PE Portable Compressor

www.forconstructionpros.com/22005804

Overland Carts 1400 Series All-Electric Drivetrain Cart The 1400 series carts operate on an all-electric drivetrain powered by a rechargeable 75-amp-hour battery pack that provides 14 to 16 hours of use or an estimated 18 to 19 miles on a single charge.

• 36V 1,400W transaxle • Can haul 1,200 lbs. on hard, flat surfaces and 1,100 lbs. on grassy inclines up to 15° • 10-cu.-ft. wheelbarrow-style hopper made from a rust-proof, heavy gauge HDPE • Power dump feature uses an electric lifter to assist in dumping the contents of the hopper

www.forconstructionpros.com/22005905

Bosch 18V Brushless Rotary Hammer The GBH18V-28DC 18V Brushless Connected-Ready SDS-plus Bulldog 1 1/8-in. rotary hammer offers 2.6 ft.-lbs. of impact energy and 0-950/0-4,250 rpm/bpm.

• 3.9-in. drilling depth with GDE280 SDS-plus Dust Collection Attachment • Maximum bit length of up to 10 in.

• Includes KickBack Control, a reverse setting and anti-vibration system

www.forconstructionpros.com/22018170

The Mobilair M59PE is available in two models that can deliver 135 to 165 scfm with a pressure range of 150 to 200 psig or 165 to 195 scfm with a pressure range of 100 to 150 psig.

• Hatz Tier 4 Final diesel engine • Anti-frost Control automatically adjusts operating temperature based on ambient conditions • Sigma Control Smart with easy to use menu display allows user to adjust settings and monitor fuel consumption, fluid levels and operating conditions • Wide-opening, scratch- and dent-resistant, molded polymer gullwing doors

www.forconstructionpros.com/22043435

POWR2 1.2-MW Battery Systems POWRBANK renewable power systems come in sizes to provide up to 1.2 MW of power output.

• Power the peak load and the generator just recharges the battery • Work like a large capacitor to provide rapid charging • Sizes available include 250, 500 and 800 kW • Provide a 150% overload capacity for one minute • Allow companies to utilize solar and wind power if available

www.forconstructionpros.com/21378509

BossTek Dust Boss Atom

WE’VE TURNED THE WORLD OF PoRTABLE COMPRESSORS

The Sullair Mid-Range Series features two units that can cover the jobs of up to 9 different compressors.

These master-of-all-trades machines bring unmatched versatility to the jobsite to save you time, energy and money.

MANAGING YOUR FLEET JUST GOT A WHOLE LOT SIMPLER.

3 COUNTLESS PRESSURE & FLOW COMBINATIONS 3 TIER 4 FINAL CAT AND PERKINS ENGINE OPTIONS 3 ELECTRONIC SPIRAL VALVE TECHNOLOGY — A SULLAIR EXCLUSIVE

UPSIDE DOWN LEARN MORE AT UpsidedownCompressors.com

© 2021 Sullair, LLC. All rights reserved.

48 EQUIPMEN T TOD AY | March 2022

www.ForConstructionPros.com

The compact, diesel-powered DustBoss Atom is a fan-less, self-contained dust suppression system that incorporates remote control and 4G LTE telematics technologies as standard equipment.

• Provides a throw of 100 ft. with an adjustable elevation angle and user-defined oscillation to precisely aim dust-capturing mist • Mist comprised of millions of droplets per minute in the range of 50 to 200 microns • 9.1-hp Kohler KD440 air-cooled engine meets Tier 4 Final standards and complies with California CARB requirements • Cat Pumps 56G1 water pump requires just 40-psi minimum inlet pressure

www.forconstructionpros.com/21244272

Products WORKS ITE EQU IPMENT

Werner Bantam and Max Patrol Self-Retracting Lifelines HIPOWER Heavy Duty Industrial Diesel Standby Series Thermal Intelligence Basecamp U.S. Saws JS-160 Propanepowered Joint Clean-out Saw The JS-160 is designed to clean out precut control joints before filling or remove old deteriorated joint fill material that needs to be replaced.

• Uses a 10-in. blade and rotates in an “upcut” direction to allow dust collection when used with a vacuum • Can reach a maximum depth of 3 in.

• Suitable for interior projects where gasoline power is not permitted

www.forconstructionpros.com/21403944

The Basecamp green-certified heater, light tower and generator delivers efficiency as a flameless heater plus provides a 360° LED lighting package and 27 kW of available power.

• SmartTalk IoT technology monitors and controls heater 24/7 and alerts via SMS or email before there is a problem • Light package produces 192,000 lumens 5K color • Minimum run time of 48 hours with 27 kW of continuous power • Kubota 2.4L Tier 4 Final engine • 119-gal. fuel tank capacity

www.forconstructionpros.com/22043500

The redesigned Heavy Duty Industrial (HDI) Diesel Standby product line provides power solutions for commercial, industrial and life-critical applications.

• Range from 60 to 600 kW • Feature Yanmar, FTP-Iveco and Volvo industrial engines and Stamford alternators or ABB breakers • Designed with the latest advancements in noise reduction and weather durability • Canopies painted with 11-stage powder painting process • UL2200, CSA and Seismic Certified with the 2021 International Building Code (IBC) plus meet NFPA110 standards for emergency and standby power systems

www.forconstructionpros.com/22043422

This updated series of self-retracting lifelines includes the Bantam 6-ft. Web SRL, 12 updated Bantam products and nine Max Patrol products in a variety of configurations.

• Configurations include single leg and twin leg and up to three different hook options • Approved for leading-edge use on steel beams, precast concrete and B-deck • Bantam 6-ft. Web Leading Edge SRL uses webbing that weighs 30% less than steel cable of the same length • Tested for a user capacity of up to 400 lbs. when used overhead • Require less clearance for both overhead and foot-level anchors

www.forconstructionpros.com/21821727

Atlas Copco 400 Series CD T4F Portable Compressors

Generac MDE330 and MDE570 Diesel Generator Sets

The 400 Series CD T4F single-stage, oil-injected air compressors are powered by a liquid-cooled, four-cylinder, turbocharged, Tier 4 Final diesel engine.

• Airend, diesel engine with exhaust treatment, cooling circuit, air/oil separation and control systems all enclosed within a sound-dampened HardHat enclosure • Deliver up to 400 cfm at 150 or 200 psi depending on model • PACE system enables multiple pressure and flow settings to match air flow and pressure to applications • XC2003 controller provides easy operation and diagnostics of the compressor and engine

The MDE330 features a Perkins 9.3L Tier 4 Final-certified engine and the MDE570 utilizes a Perkins 18.1L Tier 4 Final-certified engine.

• Exhaust Temperature Management load management technology designed to eliminate wet stacking risk • Standard PowerZone Pro Sync controller with easy to use touchscreen display allows user to easily monitor performance and perform diagnostics • Rugged steel design and construction with wideopening removable doors for easier access to all service points.

• Run time of at least 25 hours before refueling • Can be configured for paralleling

www.forconstructionpros.com/22043357

www.forconstructionpros.com/22043418

Schweiss Bi-Fold Superstructure Triple Leg Stand-Alone Door The Superstructure Triple Leg Stand-Alone Doors feature a tripod leg design that transfers the door weight to the footings that support both the bi-fold and hydraulic door models.

• Come fully pre-assembled, pre-welded and pre-hung from the factory within a presquared frame for ease of installation • Framework consists of a continuous header that’s factory fitted to the tripod cylinder legs • Hydraulic cylinders automatically pull door tight against building and keep it in a locked position for a tight seal • Heavy-duty hinges pre-welded to the door frame and horizontal continuous member for ease of installation

www.forconstructionpros.com/21366898

STICKY CARPET GLUE?

MAGNA-BLADES

REMOVE Thick/Soft Coatings without digging into the concrete.

Problem Solved. edcostore.com • sales@edcostore.com • edcoinc.com

www.ForConstructionPros.com

March 2022 | EQ U I P MEN T TO D AY

49

WO R KS I T E E QU I P M E N T Products Husqvarna DXR Demolition Robots

Xylem Flygt Bibo Alpha Dewatering Pump The 8-kW Flygt Bibo Alpha brings built-in intelligence to industrial dewatering.

• Decision Intelligence ensures pump automatically adapts to environment and only operates when needed • Wear and tear reduced by minimizing instances of snoring and dry running • Compact and stable design with fewer components • Adaptive mode can be used when there is a need to maintain a constant low water level in the sump • Level mode consists of start and stop preset levels controlled with a built-in pressure sensor

www.forconstructionpros.com/21614852

The DXR 145, DXR 275, DXR 305 and DXR 315 feature an exhaust-free electric motor and, on average, offer a 20% power increase compared to previous models.

• Radio-link, 2.4-GHz remote control unit provides easier, more precise operation, an improved overview of machine status and a range of up to 948 ft.

• Compact design easily maneuvers or can be lowered through small openings • Engineered to facilitate easier troubleshooting • Weights range from 2,171 to 4,453 lbs.

• Various multi-tools and factory installed packages available

www.forconstructionpros.com/22043427

Milwaukee Tool M18 FUEL 1-in. SDS Plus Rotary Hammer

RIDGID PCS-500 Transportable Pipe Saw Fully transportable, purpose-built Pipe Saw quickly and efficiently cuts 1- to 12-in. pipe up to a 1/2-in. wall thickness.

• Configured to cut steel and stainless steel or can cut plastic and cast steel with optional blades • Secures to pipe with a rugged three-point roller system that cuts up to 12-in. pipe in minutes • Can produce clean, square cuts in 10-in. schedule 40 pipe in just over a minute • Conveniently placed handlebars and feed rate speed monitoring with LED interface enable easily controlled rotation from an ergonomic position

www.forconstructionpros.com/21614841

The M18 FUEL 1-in. SDS Plus rotary hammer hits harder and drills over 40% faster than the previous generation.

• POWERSTATE Brushless Motor delivers 2 ft-lbs. of impact energy, 1,330 rpm and 4,800 bpm • M18 HIGH OUTPUT XC6.0 Battery Pack enables drilling up to 125 (3/8” x 2”) holes per charge • REDLINK PLUS Intelligence protects from overload, overheating and over discharge • Safety features include AUTOSTOP Kickback Control and AVS Anti-Vibration System • M18 FUEL HAMMERVAC SDS Plus dedicated dust extractor with AUTOPULSE filter cleaning system

www.forconstructionpros.com/22043486

Stihl TSA 230 Battery-powered Cutquik Cut-off Saw The battery-powered TSA 230 Cutquik cut-off machine delivers maneuverability and solid cutting performance in a lightweight, compact package.

• Onboard water connection and control suppresses dust • Low-maintenance, brushless, commercial-grade, high-torque electric motor • Utilizes the 36V lithium-ion battery system • Provides up to 15 minutes of performance with no gradual drop in power • Quick recharge rate especially with the optional Rapid Charger

www.forconstructionpros.com/22006008

ented Design Pat

360°

Industry Members Members, contact us about a ffree valve sample

Mini-Ductor® Venom® HP The Venom HP is the highest powered Mini-Ductor handheld induction heater available at 1800 watts of power. Allows users to heat metal components faster than ever before! Manufactured with genuine OEM parts.

FUMOTO ®

The Original nal Engine Oil Drain Valve Since 1976

ȼɨɃɂɂɨȾɀȻɨɀɀɃȿ

APPLICATIONS: > Calipers > Lugnuts > Rusted Bolts > Vinyl Graphics > and 100’s more!

fumotousa.com

More precise, safe and reliable than a torch.

www.theinductor.com 877-688-9633

50 EQU IPMEN T TOD AY | March 2022

Follow Us on Social Media:

www.ForConstructionPros.com

For information right away, please call 800-257-8163.

We make it easier for you to get a price quote.

Visit our web site at eagerbeavertrailers.com, and you're a "click" away from getting all the information you need from our nearest dealer.

Simple, Fast... Guaranteed!

25 XPL

• CAPACITY: 50,000 lbs.

• Air lift front axle standard

20 XPT

w/ Hydraulic Ramps • CAPACITY: 40,000 lbs.

35 GSL/PT • CAPACITY: 70,000 lbs.

75

50 GSL/PT

ANNIVERSARY

• CAPACITY: 100,000 lbs.

For a quote on any model, please call

th

1946-2021

800-257-8163

EagerBeaverTrailers.com

Your perfect partner for data center construction.

By safely delivering mission critical equipment, expertise and information seamlessly across the complete construction life cycle, United Rentals enables its customers to build their data centers more quickly and efficiently. Our Total Control® digital solution allows you to track both rented and owned equipment utilization and benchmark its performance against prior projects and your peers.

With our commitment to safety and security, our engineering professionals have the know-how to plan and execute during construction through ongoing facilities maintenance spanning product, service and support groups. Lastly, we have the experience to help maximize your sustainability opportunities and the integrated technologies around managing your equipment to provide you reliability and increased uptime.

UnitedRentals.com I 800.UR.RENTS © 2022 United Rentals, Inc.