Horvick 2013 by Forum Communications Printing

Presorted Standard US Postage

PAID

Permit # 1423 Fargo ND

2013

4350 48th Ave. N. Fargo, ND 58102

Sales and Parts

1-800-373-4084

Main Location: 4350 48th Ave. N. Fargo, ND 58102-7404 Cell Phone Users Call 701-280-2862 Fax 701-293-0961 Land Line Users Call 800-373-4084 Toll Free Fax Order Line 800-368-5321 Mankato Spray Center Hwy 169 South Mankato, MN 56001 Cell Phone Users Call 507-388-6295 Fax 507-388-4668 Land Line Users Call 800-722-9376

2013 Parts & Sales Catalog

Hours: M-F 8:00–5:00 Peak Seasons: M-F 7:30-6:00, Sat. 8:00–Noon www.horvick.com Questions/Parts Orders: parts@horvick.com

Fertilizer/Chemical Application Equipment & Parts Specialists

1-800-373-4084 www.horvick.com

Policies, Terms & Conditions Policies

Terms

Returned Items

Horvick fabricated models, assemblies, and parts are warranted for one year from the date of shipment to the original purchaser as determined by our records against defects in material and workmanship only. No warranty, expressed or implied, extends beyond this one-year period.

Terms of sale are indicated on all invoices and are subject to payment accordingly. Horvick Incorporated accepts Visa, Master Card, and Discover. We encourage and prefer that all retail customers utilize our credit card policy. Orders received prior to establishment of credit will be subject to C.O.D., credit card, or letter of credit. Any account with a balance past 90 days will be automatically put on C.O.D. Any collection action necessary to recover moneys properly due Horvick Incorporated as a result of orders received, accepted, and shipped by us in good faith, will be decided by Horvick Incorporated Company’s credit department or appointed collection agent.

All returns must be accompanied by an invoice or sales order. Merchandise must be returned within 15 days or a restocking charge may be imposed. NO RETURNS AFTER 30 DAYS. Returned items over $100.00 in value will be credited on account for store credit only. We reserve the right to treat any returns as store credit only. Non-stock or special order items are nonreturnable and may require a down payment at the time of order.

All expenses, including court costs, collection, and legal fees involved in recovering moneys due to Horvick Incorporated from such collection action will be at the cost of the debtor.

Prices shown in this catalog are current to the best of our knowledge. However, prices may change at any time without notice or obligation. PRICES CHARGED WILL BE CURRENT AT THE TIME OF SHIPMENT. We have numerous suppliers who change prices at different times of the year. If you have any questions on pricing, please call or write our office to confirm prices and/or dealer discounts. Not responsible for typographical errors.

Warranty is limited to repair or replacement of the part after factory approval following factory inspection to determine cause of defect. Liquid-carrying vessels are subject to the applicable warranty only. The loss of chemicals within the vessel are not covered by warranty. Expenses, inconveniences, or other damages that may occur are not subject to warranty consideration. Warranty is void if the vessel failed because of inadequate support of vessel, misuse or lack of reasonable care, or use of chemical formulations not recommended by the vessel manufacturer. Check all labels for the information on known chemicals that are detrimental to vessel. User shall determine the suitability of the product for his intended use and assume all risks and liability in connection there with. The salesman may have made statements about Horvick products described in this warranty provision. Such statements do not constitute warranties, shall not be relied upon by the buyer, and are not part of the warranty provision. The entire warranty is embodied in this writing. Horvick Incorporated neither assumes nor authorizes any person to assume for it any other liability in connection with its equipment. Products reported within the warranty period must be returned to the factory, transportation prepaid; they will be returned transportation collect. Parts furnished to Horvick Incorporated by other manufacturers for resale or assembly by the company are subject to the warrantyof that manufacturer. Warranty claims will be processed by Horvick Incorporated under that supplier company’s warranty when items are returned to Horvick Incorporated Company, transportation prepaid.

1-800-373-4084

Conditions Orders accepted and all agreements are subject to delays occasioned by accident, strike, fires, and causes beyond our control. Horvick Incorporated maintains a private truck fleet to deliver truck load quantities of Horvick products when requested by the customer. This service is invoiced at $2.50 per loaded mile from the factory to a single destination within the U.S.A. Should more than one unloading stop be required, the billing will be at $1.25 per round trip mile, to a maximum of three stops. For stopover privileges exceeding three stops, add $10.00 net charge per stopover. Unloading facilities and personnel to unload the equipment are the responsibility of the consignee. Delivery service charge is due upon delivery. Less than truckload shipments will be made by common carrier, F.O.B... factory, parcel post, United Parcel Service (UPS), or Spee-Dee. Charges for parcel delivery will be prepaid and insured and invoiced to the customer. In emergency cases, Horvick Incorporated will make special deliveries to air freight or bus freight at Fargo, North Dakota. A special delivery charge of $15.00 will be made for air terminal delivery. For delivery to the bus terminal, the special delivery charge is $15.00.

NO RETURN OF ANY CUT LENGTHS OF HOSE. NO RETURNS OF ELECTRONIC COMPONENTS OR SPRAY TIPS THAT ARE NOT IN ORIGINAL, SEALED BOXES/BAGS.

General labor rate per hour is $40.00 for general repair. Electronics repair is $50.00 per hour. Horvick’s does not have an on-site pump/meter repair. We can arrange for an outside source to repair them for you. When bringing in pumps or meters for repair, remember to FLUSH AND DRAIN. ALL ITEMS MUST BE TRIPLED RINSED AND ACCOMPANIED BY MSDS, OR THEY WILL BE RETURNED. ALL ITEMS SENT TO HORVICK INCORPORATED SHOULD HAVE PACKING SLIP WITH NAME, PHONE NUMBER, AND BRIEF EXPLANATION OF WHAT ACTION IS REQUIRED. Horvick Incorporated tries to maintain an adequate parts inventory, but with supply and demand, shortages do occur. If Horvick Incorporated deems these backorders were caused by circumstances beyond our control, all shipping costs will be passed on to the customer. There will be a $10.00 minimum charge on all non-paid orders. This charge is exclusive of any shipping charges.

Table of Contents Sprayers

Fittings

Spray Tips

Foam Markers . . . . . . . . . . . . . . . . . . . . . . 4 Demco Lawn & Garden Sprayers . . . . . . . 5 Spot Sprayers. . . . . . . . . . . . . . . . . . . . . . . 6 Special Applicators. . . . . . . . . . . . . . . . . . . 7

Dry Breaks Micro-Matic. . . . . . . . . . . . . . 64 Fittings . . . . . . . . . . . . . . . . . . . . . . . . 65-73 Manifold Fittings. . . . . . . . . . . . . . . . 74-76 Garden Hose Fittings. . . . . . . . . . . . . . . . 77 Ball Valves. . . . . . . . . . . . . . . . . . . . . 78-80

SPRAY BOOM PARTS. . . . . . . . . . . 116-122 TeeJet® Caps & Adapters. . . . . . . . . . . . 116 Nozzle Bodies. . . . . . . . . . . . . . . . . . . . . 117 QuickJet® Nozzle Bodies. . . . . . . . . . . . . 118 Nozzle Body Assemblies . . . . . . . . 119-120 Nozzle Accessories. . . . . . . . . . . . . 121-122 SPRAYER TIPS. . . . . . . . . . . . . . . . . 123-139 Spray Tip Selection Guide. . . . . . . . . . . 123 Tip Charts. . . . . . . . . . . . . . . . . . . . 124-125 Spraying Systems Tips. . . . . . . . . . 126-131 Boomless Spray Tips . . . . . . . . . . . . . . . 132 Nitrogen Application. . . . . . . . . . . . . . . 133 Hypro Spray Tips . . . . . . . . . . . . . . . . . . 134 Orifice Plates . . . . . . . . . . . . . . . . . . . . . 135 Flow Monitors . . . . . . . . . . . . . . . . . . . . 136 Fertilizer Starter Kits. . . . . . . . . . . 137-139

Spra-Coupe Parts................... 8-9 Tanks & Accessories Tanks. . . . . . . . . . . . . . . . . . . . . . . . . . 10-15 Mix Tanks. . . . . . . . . . . . . . . . . . . . . . . . . 16 Tank Parts. . . . . . . . . . . . . . . . . . . . . . . . . 17 Tank Odds & Ends. . . . . . . . . . . . . . . . . . 18 Tank Cleaning . . . . . . . . . . . . . . . . . . . . . 19

Sprayer Tank Trailers/Carts Utility Sprayers. . . . . . . . . . . . . . . . . . . . . 20 Demco Sprayers . . . . . . . . . . . . . . . . . . . 21 Demco Booms . . . . . . . . . . . . . . . . . . . . . 22 Demco Tractor Mounted Tanks . . . . 23-24 Liquid Tank Trailers. . . . . . . . . . . . . . . . . 25 Spray Trailers. . . . . . . . . . . . . . . . . . . . . . 26 Duo-Lift Products. . . . . . . . . . . . . . . . 27-28

NH3 Wagons............................ 29 Conveyors Fertilizer Movers . . . . . . . . . . . . . . . . . . . 30 Belt Conveyors. . . . . . . . . . . . . . . . . . 31-32

Spreaders & Tenders Simonson Spreaders. . . . . . . . . . . . . . . . . 33 Simonson Tenders. . . . . . . . . . . . . . . . . . 34

Table of Contents

Pumps & Meters PTO Pumps. . . . . . . . . . . . . . . . . . . . . . . . 35 Banjo Gas-Driven Transfer Pumps . . 36-37 Wet Seal Pumps. . . . . . . . . . . . . . . . . . . . 38 Gas-Driven Transfer Pumps. . . . . . . . . . . 39 Honda Engines & Lovejoy Couplers. . . . 40 Pedestal Pumps . . . . . . . . . . . . . . . . . . . . 41 Electric Pumps . . . . . . . . . . . . . . . . . . 42-43 Cast Iron Pumps. . . . . . . . . . . . . . . . . . . . 44 Centrifugal Pumps. . . . . . . . . . . . . . . . . . 45 Diaphragm & Piston Pumps . . . . . . . . . . 46 Roller Pumps . . . . . . . . . . . . . . . . . . . . . . 47 Roller Pump Parts & PTO Couplers. . . . . 48 Ground-Drive Pumps . . . . . . . . . . . . . . . 49 Chemical Pumps. . . . . . . . . . . . . . . . . . . . 50 Herbicide Pumps . . . . . . . . . . . . . . . . . . . 51 Chemical Hand Pumps / Dry Breaks. . . . 52 Chemical Flow Meters. . . . . . . . . . . . . . . 53 Herbicide Meters. . . . . . . . . . . . . . . . . . . 54 Herbicide Equipment. . . . . . . . . . . . . . . . 55 Fuel Meters & Pumps. . . . . . . . . . . . . . . . 56 Pump Seals. . . . . . . . . . . . . . . . . . . . . . . . 57

Hoses & Accessories Suction Hose. . . . . . . . . . . . . . . . . . . . . . . 58 Sprayer Hose . . . . . . . . . . . . . . . . . . . . . . 59 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Pressure Line Tubing & Fittings . . . . . . . 61 Hose Reels & Hose Cutters . . . . . . . . . . . 62 Hose Clamps. . . . . . . . . . . . . . . . . . . . . . . 63

Valves Ball Valves. . . . . . . . . . . . . . . . . . . . . 78-80 Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Electrically Operated Valves. . . . . . . 82-83 Valves & Steel-Cased Gauges . . . . . . . . . 84

Handguns Spraying Systems Handguns . . . . . . . . . 85 Cone Tips and Swivels. . . . . . . . . . . . . . . 86

Spraying Accessories Spraying Systems Strainers. . . . . . . . . . . 87 Line Filter Replacement Parts. . . . . . . . . 88 Line Strainers. . . . . . . . . . . . . . . . . . . . . . 89 T-Strainers & Misc. Strainers. . . . . . . . . . 90 Y-Strainers . . . . . . . . . . . . . . . . . . . . . . . . 91 Manifold Line Strainers. . . . . . . . . . . . . . 92

Electronics – Controls & GPS Stand-Alone Flow Meters. . . . . . . . . . . . 93 GPS Antenna . . . . . . . . . . . . . . . . . . . . . . 94 Field Computer - Raven. . . . . . . . . . . . . . 95 Boom Management - Raven. . . . . . . 96-97 Application Management. . . . . . . . . . . . 98 GPS Steering Systems. . . . . . . . . . . . . . . . 99 Electronic Sprayer Controls. . . . . . 100-102 Speed Sensor Cables . . . . . . . . . . . . . . . 103 Raven Precision Products. . . . . . . . . . . . 104 Raven NH3 Control . . . . . . . . . . . . . . . . 105 Raven Injection . . . . . . . . . . . . . . . . . . . 106 TeeJet Guidance Systems . . . . . . . . . . . 107 Monitors & Controllers . . . . . . . . . 108-109 Micro-Trak NH3. . . . . . . . . . . . . . . . . . . 110 Blockage Monitor . . . . . . . . . . . . . . . . . 111 NEW Monitors. . . . . . . . . . . . . . . . . . . . 112 Flowmeters & Servo Valves. . . . . . . . . . 113 MT-Cables & Y-Cables. . . . . . . . . . . . . . 114 Dickey John Moisture Testers. . . . . . . . 115

NH3 Knives & Accessories NH3 Knives/Tubes . . . . . . . . . . . . . 140-141 Shanks & Shank Clamps. . . . . . . . . . . . 142

NH3 Meters & Valves NH3 Meters & Valves. . . . . . . . . . . . . . . 143 NH3 Tank Valves . . . . . . . . . . . . . . . . . . 144 NH3 Accessories. . . . . . . . . . . . . . . 145-147 NH3 Gaskets & Hoses. . . . . . . . . . . . . . . 148

NH3 Handling Equipment NH3 Gauges. . . . . . . . . . . . . . . . . . . . . . 149 NH3 Manifold Systems . . . . . . . . . 150-151 NH3 Safety Decals. . . . . . . . . . . . . . . . . 152

Hitches................................... 153 Safety Equipment.......... 154-155 Odds & Ends.................... 156-157 Misc. Info Useful Formulas. . . . . . . . . . . . . . . . . . . 158 Useful Information . . . . . . . . . . . . . . . . 159

Replacement Parts Breakdowns................... 160-171 Fax Order........................ 172-173 Index............................... 174-176

The following manufacturers typically announce price increases during the spring or summer. Continental NH3 Products Great Plains Industries Squibb Taylor Pioneer Quick Coupler Raven Industries

www.horvick.com

Sales Sales Representatives

NORTH DAKOTA Chuck Punton 701-793-3849

Barry Dissette 701-353-9822

MINNESOTA John Basham 701-446-6143

SOUTH DAKOTA Mike Stewart 605-769-1864

Table of Contents

Inside Sales Matthew Wourms Inside Sales Manager

Tim Pederson Equipment Sales

Ryan Jergeson Parts/Inside Sales

Lee Erickson Equipment Sales

John Olson Parts/Inside Sales

From all the staff at Horvick Incorporated. Thank you for your continued support. Proudly Serving Americasâ&#x20AC;&#x2122; Farmers Since 1955.

Blaine Weyrauch Parts/Inside Sales

1-800-373-4084

Foam Markers Foam Marker High Output Poly Valves, Anti-Siphon Standard

By generating the foam at the boom end, the foam does not have to be pushed through a long length of hose, compressing the foam and degrading its quality. Horvick’s foam marker is designed to mark quickly. Using 1/4” solution and air line hoses to the foam chambers keeps weight on the boom to a minimum and promotes easier boom folding. Available with 15- or 25-gallon tank. Comes with enough hose to supply an 100’ boom. High capacity models are used for booms over 80’long.

Sprayers

Standard Features nnThomas HD compressor nnShurFlo liquid pump nn (see page 50 for parts) nnEnd nozzle style foam chambers nn3” foam boots and socks standard

nnPackard connections on the wiring harness, allowing addition of extension cables nnSpade-style in-line fuse nnHigh flow solenoid valves nnAnti-siphon check valve

Part # FM-14-LC 14 gallon foam marker with high capacity compressor. Includes 250’ of 1/4” hose

Part # FM-25-LC 25 gallon foam marker with high capacity compressor. Includes 250’ of 1/4” hose

Part # FM-14-HC 14 gallon foam marker with high capacity compressor. Includes 375’ of 1/4” hose

Part # FM-25-HC 25 gallon foam marker with high capacity compressor. Includes 375’ of 1/4” hose

$1,195.00 V

$1,215.00 V

$1,205.00 V

$1,225.00 V

Marking Foam

We’ll Mark the RIGHT Spot!

Foam Marker Parts Part # Description Price TS14 15 gallon foam marker tank $79.00 V TS25 25 gallon foam marker tank $89.00 V FM1010-1 12v high capacity air compressor $339.00 V (907CDC18) 8000-543-250 12v liquid pump (1.4 GPM) $107.00 V FMH-200 2” bulk drop hose, per foot $3.50 V 2204A Solenoid, 3-way (new style) $87.98 H FM1001 FOAM CHAMBER WITH DROP HOSE $31.00 V FM900F Boot/sock set-2 of each $21.95 V FM900G 1 boot with clamp $9.95 V FM900S Sock only $1.50 V FM14-EXT15 15’ extension cable $65.00 V FM1070 Air filter, 6” x 6” square $1.10 V TH1007 Intake filter, 1-1/4” round white $0.99 V EL8010 Switch $14.95 V HFM-WHF Wire harness with fuse $149.00 V 94-391-09 Pump valve repair kit $49.00 H 94-395-06 Pump diaphragm kit $19.25 H RV663-100 Suction strainer $3.95 V HB14B 1/4” brass hose barb $1.50 V SGH025-FM 1/4” clear hose $0.28 V HFM-NV Brass needle adj. valve $16.00 V HFM-BYAS “Y” hose barb assembly $2.95 H HFM-LID Lid, threaded $8.95 V FM1001C Foam Chamber w/o hose $27.00 V 424210 Check Valve $2.25 H BY14 1/4” Y only $2.31 H TH1066 Std Filter/Cup Assembly $17.99 V TH1034 Intake Filter, gray $0.50 V

Foam Dye

No additional water softener required even with extremely poor water. Contains both water softener and tank cleaning agent-eliminating scum and lowering total cost of foam. The foam-to-mix ratio is 160:1 (10-gallons of water to 1 cup of foam solution). With the water softener and tank cleaning agents in the foam mix, it is necessary to measure accurately. Part # FOAM-160

$57.00 C

Increases visibility of marker foam. Add 1 oz. of dye for each 10-gallons of foam solution.

Part # Description Price DYE-P 16 oz. bright pink dye $24.00 V DYE-B 16 oz. blue dye $24.00 V

www.horvick.com

Demco Lawn & Garden Sprayers 40 Gallon Pro Series

Desc. 40 gallon tank

Skid Mount 9464063 $838.00 K

Booms & Access. 80” Boom 2 nozzle 10’ Boom 6 nozzle 18’ Boom 10 nozzle Boomless nozzle kit Hose Reel w/50’ hose

Sprayers

n 40 gallon tank with sloped bottom for complete drainage n 5 GPM, 35 PSI pump. 12 dvc n Handgun with 15’ hose n Priced less booms, order separately

40 gallon 3 pt with 12’ boom

Trailer

3 PT

9464077 $1,120.00 K

9464084 $1,002.00 K

Part #

Price

80B25 SPSB-10 DB18 9428147 9428114

$100.00 $299.00 $378.00 $217.00 $199.00

K V K K K

40 gallon trailer with 80” boom

60/80 Gallon Pro Series n 60 or 80 gallon tank with sloped bottom for complete drainage. Pocket for extra container or jug. n 5 GPM, 35 PSI pump. 12 dvc or gas engine with roller pump. n Handgun with 15’ hose n Priced less booms, order separately

60 gallon trailer with 18’ boom

80 gallon 3 pt with 21’ boom and PTO roller pump

Skid Mount Trailer 9464064 9464078 $1,023.00 K $1,311.00 K 9464066 9464080 3 1/2 HP Briggs $1,527.00 K $1,809.00 K 60 gallon 9464068 9464082 4 HP Honda tank $2,078.00 K $2,359.00 K PTO Roller* for 18’ boom max PTO Roller 3 section 9464065 9464079 12 Volt $1,120.00 K $1,435.00 K 9464067 9464081 3 1/2 HP Briggs $1,658.00 K $1,959.00 K 9464069 9464083 80 gallon 4 HP Honda $2,221.00 K $2,523.00 K tank PTO Roller* for 18’ boom max PTO Roller 3 section 12 Volt

Booms

80” Boom 2 nozzle 10’ Boom 6 nozzle 18’ Boom 10 nozzle 21’ Boom 13 nozzle 28’ Boom 17 nozzle Boomless nozzle kit Hose Reel w/50’ hose

1-800-373-4084

80B25 SPSB-10 DB18 DB21TDF DB28TDF 9428147 9428114

3 PT 9464085 $1,068.00 K

9464087 $1,226.00 K 9464089 $1,409.00 K

9464088 $1,357.00 K 9464090 $1,567.00 K $100.00 $299.00 $378.00 $898.00 $1,055.00 $217.00 $199.00

K V K K K K K

Spot Sprayers Economy Spot Sprayer

25-gallon sprayer Part # SPS-25

This flat-bottomed, polyethylene tank mounts almost anywhere. Handles and volume markers are molded into the tank. It comes with a 12v diaphragm pump with chemical-resistant seals and valves. The 15” poly handgun has an adjustable tip. The pump is rated at 1.8 GPM.

$245.00 V

25-gallon spotsprayer w/variable pressure control Part # SPS-25P

$260.00 V SPS-25

14-gallon spotsprayer Part # SPS-14

$230.00 V

14-gallon spotsprayer w/variable pressure control Part # SPS-14P

$245.00 V

Spot Sprayer With Boom

Part # SPS-25P-HC

$325.00 V

Boom Kit 14-gallon spotsprayer w/ pressure control, universal base, and 10’ spray boom Part # SPS-14P-10

$565.00 V

SPS-14P-10 SPS-25P-10

25-gallon spotsprayer w/ pressure control, universal base, and 10’ spray boom Part # SPS-25P-10

Features:

Tank Mounting Kit Part # SPS-TM

$585.00 V

nn14 or 25 gallon tank nnPressure adjust for spray boom operation pressure gauge nnUniversal mount steel base-fits most ATV racks nn10’ breakaway boom nnAdjustable boom height nnQuickJet plumbing nnPoly Handgun

$106.00 V

Broadcast Boom 3 nozzle broadcast boom- 20’ coverage Part # SPSB-B20

SPSB-10: 10’ boom option with breakaway 2-nozzle boom, 80” spray pattern Part # SPSB-6

$79.00 V

6-nozzle boom, 120” spray pattern Part # SPSB-10

$299.00 V

$183.00 V

www.horvick.com

Sprayers

Sprayers & Applicators

SPS-14

25-gallon high capacity pump ShurFlo 4.0 GPM pump Hand wand with adj. tip Pressure control valves Pressure Gauge Spray boom outlet On/Off switch

Special Applicators Red Weeder Herbicide Applicator

Rechargeable Electric Backpack Sprayer

Wipe herbicide exactly where you want it—on the weeds—not on other plants, the soil, or in the air. More economical because you use less herbicide.

No Pumping! Backpack sprayer n 4 gallon Part # SRS-600 n 4 speed, 1 GPM $262.00 C pump n Adjustable spray tip

Applicator Part # WEEDER

$43.00 V

Replacement Sleeve Part # RW-SLEEVE

$9.95 V

Horvick Carpet Roller Chemical Applicators

Part # HOR-6 HOR-12 HOR-36 HOR-48

Description 6” Edger 12” Edger 36” Hand-Held, 4 Gallon 48” Pull-Type, 12 Gallon

Herbicide Equipment

Uses a roller to apply herbicides and chemicals direct to vegetation without having to spray them. Chemical is applied at a rate of one gallon per 1,000 square feet at the average walking speed of 2.5 mph. The application rate may be increased by increasing speed of pushing or towing. Price $189.00 K $195.00 K $359.00 K $539.00 K

ATV Maxi-Sprayer Tandem Axle ATV Spray Trailer

Features: n Walking tandem axles – adjustable for row spacing n 3 HP Honda engine n Can be pulled by larger ATV’s or small utility tractors Sprayer ATV-MAXI20-100 ATV-MAXI20-150 ATV-MAXI30-100 ATV-MAXI30-150

1-800-373-4084

n Clean water rinse tank n Auto boom breakaway n ACE centrifugal pump n High flotation tires n Adjustable hitch height n 1 Year Sprayer Warranty

Description 20’ Maxi Sprayer 20’ Maxi Sprayer 30’ Maxi Sprayer 30’ Maxi Sprayer

100 150 100 150

gal. gal. gal. gal.

Price $4,190.00 K $4,290.00 K $4,610.00 K $4,710.00 K

Spra-Coupe

Sprayer Parts

Water-Cooled Parts Part # SC-CARB-WC SC-CAM-S SC-CS-WC SC-EGK-2 SC-EGK-2U SC-EGK-2L SC-EMG-WC SC-IMG-WC SC-FP-2 SC-FW-WC SC-GOV-TR SC-GOV-WC SC-HG SC-MBS-2 SC-OC-1 SC-OIL-2 SC-OP SC-OPG SC-OPS-2 SC-PIST SC-RING-2 SC-RBS-WC SC-RAD SC-RHU SC-RHL SC-TB SC-TB-CG SC-TB-IP SC-TH SC-WP SC-WPH-WC

E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-H E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G E-G

Description Carburetor Cam Seal Reman Crankshaft Engine Gasket Kit Engine Gasket Kit (Upper) Engine Gasket Kit (Lower) Exhaust Manifold Gasket Intake Manifold Gasket Fuel Pump Flywheel Governor Throttle Rod Governor Head Gasket Main Bearing Set Oil Cap Oil Pump Oil Pan Oil Pan Gasket Oil Pressure Sender Piston Piston Ring Set Rod Bearing Set Radiator Radiator Hose, Upper Pump Radiator Hose, Lower Pump Timing Belt Timing Belt Cam Gear Timing Belt, Idler Pulley Thermostat Water Pump Water Pump Housing

Price $1,280.00 $6.95 $375.00 $143.00 $129.00 $101.00 $7.99 $8.86 $56.30 $225.00 $21.50 $495.00 $33.75 $72.50 $7.95 $87.50 $101.00 $15.00 $6.95 $121.00 $32.95 $32.25 $1,209.00 $17.65 $16.95 $24.95 $52.00 $23.50 $10.95 $35.50 $74.00

J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J

SC-FB SC-FP SC-FT SC-FW SC-GC SC-GN SC-GOV SC-GOV-NV SC-GOVB SC-GVB SC-GOV-LE SC-GOV-L SC-IM SC-LB SC-LB-CC SC-MFF SC-MIK SC-MM SC-OC SC-OFS SC-OPS SC-PF SC-PRT SC-PRT-NA SC-PRTG SC-RS SC-SG SC-SPL SC-SSC SC-STB SC-VCG

A-B A-D A-B A-D A-B A-D C-D A-B C-D C-D C-D C-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D A-D

Fan Belt Fuel Pump Fuel Tank And Cap Fly Wheel Gas Cap Gl And Nut For Flywheel Governor, Belt Driven Governor, Vacuum Governor Bracket Governor Belt Governor Linkage Ends Governor Linkage Rod Intake Manifold 1600 Cc Long Blk, Rebuilt Core Charge, Long Block Muffler W/ Installation Kit Muffler Installation Kit Motor Mount Oil Cap Oil Filler Spout Oil Pressure Sender Oil Pump Flange Push Rod Tube—Adjustable Push Rod Tube—Non-Adj Push Rod Tube Gasket Rear Seal, Engine Sump Gasket Sump Plate W/ Drain Plug Sump Screen Stud Bolt (Sump Plate) Valve Cover Gasket

$8.95 J $39.47 J $175.00 J $150.00 J $9.95 J $29.95 J $650.00 J $380.00 J $125.00 J $145.00 J $9.95 J $105.00 J $169.00 J $1,895.00 J $300.00 NET $225.00 J $18.50 J $18.95 J $4.95 J $50.00 J $6.95 J $4.75 J $12.00 J $4.95 J $2.50 J $17.65 J $3.50 J $20.00 J $10.00 J $2.50 J $1.95 J

Air-Cooled Parts Part # SC-AN SC-CL SC-CLG SC-DS SC-EGK SC-EJP-L SC-EJP-R SC-EXS SC-FAN

A-D A-D A-D A-D A-D A-D A-D A-D A-D

Description Sump Plate Acorn Nut Oil Cooler, With Gaskets Gasket Set (Oil Cooler) Dip Stick Eng. Gask. Kit W/Rear Seal Exhaust Pipe, J(Left) Exhaust Pipe, J(Right) Exhaust Stud Fan

Price $1.50 J $45.00 J $2.75 J $15.00 J $33.00 J $17.64 J $17.64 J $4.03 J $49.95 J

Model Key nnA: 103 nnB: 104 nnC: 115 nnD: 116 nnE: 215

nnF: 220 nnG: 230 nnH: 210 I: 3440/3640

www.horvick.com

Spra-Coupe Part # SC-BOR SC-BOR-2 SC-BP SC-BP-2 SC-BPS SC-BP-SP SC-BS SC-CP SC-CP-1 SC-CP-2 SC-MC SC-MC-2 SC-WC-L SC-WC-R

Air & Water Cooled Description C-G, Icaliper piston O-ring C-G caliper small O-ring piston C-G brake puck (1) I brake puck (1) C-G brake puck screw AG spacer A-B brake shoes, rear (set of 4) C-G brake piston, 7/8” (length) C-G brake piston, 1-1/6” (length) I brake piston A-B master brake cylinder C-H master cylinder A-B wheel cylinder, L A-B wheel cylinder, R

Carburetor Parts SC-CARB SC-CARB-115 SC-CBF SC-CBFR SC-CG SC-CHE SC-CHL SC-CJ SC-CK SC-CKM SC-ICO SC-CK-WC

A-B C-D A-D C-D A-D A-D A-D A-D A-D C-D A-D E-G

Filters SC-AF-1 SC-FF SC-FFR SC-FF-RBK-WC SC-OF

Price $2.95 J $0.95 J $9.50 J $22.55 J $1.50 J $20.95 J $62.00 J $19.95 J $23.95 J $24.95 J $125.00 J $185.00 J $58.00 J $100.00 J

Air & Water Cooled

carburetor carburetor carburetor float, (rectangular) carburetor float, (round) carburetor gasket choke element choke lever carburetor main jet carburetor kit carb. kit, manual choke idle cut-off Carb Kit

$234.00 $320.00 $30.00 $30.00 $2.00 $28.50 $72.50 $16.00 $16.95 $38.50 $28.50 $275.00

J J J J J J J J J J J J

air filter, canister style fuel filter fuel filter reservoir wc fuel filter reservoir bracket oil filter

$39.90 $4.95 $19.95 $28.70 $10.50

J J J J J

Electrical Parts SC-AK SC-ALT SC-ALT-1 SC-ALT-PULLEY SC-ALT-STAND SC-ALT-STRAP SC-BR SC-BSPT SC-COIL SC-COIL-2 SC-COIL-3 SC-COND SC-COND-2 SC-COND-6V SC-DC SC-DC1 SC-DC6 SC-DCE

A-D A-D E-G A-D C-D C-D A-D A-B A-D E-G E-G A-B C-D A E-H A-D A E-H

Air & Water Cooled alternator kit alternator only alternator, water cooled alternator pulley alternator stand alternator strap generator brush set brake spring top coil coil for Ser# 2205274 & down coil for Ser# 2205275 & up condensor condensor condensor distrib. cap w/o elec. ign. distributor cap distributor cap, 6 v dist. cap w/electronic ign.

1-800-373-4084

$395.00 $169.95 $169.00 $12.95 $18.95 $4.95 $6.95 $5.95 $35.95 $72.00 $72.50 $11.50 $11.50 $8.55 $14.00 $14.00 $12.50 $19.95

distributor clamp distributor distributor core charge dist. sending unit generator bearing generator, 12 v core charge, generator generator pulley, split ignition switch point set point set point set, 6 v regulator regulator, 6 v rotor rotor starter bush., bell housing starter bushing starter drive bendix starter drive bendix starter solenoid starter solenoid spark plug spark plug starter, 12 v starter starter, 6 volt spark plug wire set spark plug wire set

$15.00 J $105.00 J $375.00 J $50.00 NET $150.00 J $12.95 J $256.00 J $10.00 NET $12.95 J $19.95 J $9.95 J $9.95 J $9.95 J $36.50 J $32.95 J $8.95 J $8.95 J $6.50 J $6.50 J $18.95 J $18.95 J $40.25 J $34.95 J $3.45 J $3.45 J $118.00 J $135.00 J $177.00 J $16.95 J $39.00 J

Transmission & Clutch Parts

Air & Water Cooled C-H A-H E-G E-G E-G

A-D A-D EG EG E-G A-D A-D A-D A-D A-H A-B C-D A A-D A A-D E-G A-D E-G A-D E-G A-D E-G A-D E-G A-D E-G A A-D E-G

J J J J J J J J J J J J J J J J J J

Air & Water SC-BELL SC-BELL-G SC-CD SC-CD-WC SC-CVB SC-CVJ SC-GSB SC-PB SC-PRP SC-PRP-WC SC-SC SC-SRB SC-TM SC-TM-2 SC-RB SC-TOB

Cooled A-D bell housing A-D gasket, bell housing A-D clutch disc E-G clutch disc A-H CV boot A-H CV joint A-H gear shift bracket E-G pilot bearing A-D pressure plate E G pressure plate A-H shifter coupler A-G shift rod bushing C-D transmission mount E-H transmission mount C-D rubber bush. trans. carrier A-H throwout bearing guide sleeve SC-TOB-GS A-H (throwout bearing) SC-TOBS A-D shaft, throwout bearing SC-TRAN A-D transmission, rebuilt SC-TRAN-CC A-D core charge, trans. SC-TRAN-SK E-G transmission seal kit SC-TRAN-P A-D transmission plug SC-TRAN-S A-D transmission O-ring seal SC-TRAN-GSL A-D gear shift lever

$150.00 J $15.95 J $44.50 J $89.00 J $12.50 J $77.95 J $12.95 J $16.95 J $67.50 J $89.00 J $19.95 J $2.50 J $14.95 J $21.95 J $29.95 J $19.95 J $14.95 J $14.95 J CALL $250.00 NET $29.95 J $11.95 J $5.95 J $29.95 J

Sprayer Parts

SC-DCL SC-DIST SC-DIST-WC SC-DIST-WC-CC SC-DSU SC-GB SC-GEN SC-GEN-CC SC-GP SC-IGN SC-PS SC-PS-2 SC-PS-6V SC-REG SC-REG-6V SC-ROT SC-ROT-2 SC-SB SC-SB-2 SC-SDB SC-SDB-1 SC-SOL-1 SC-SOL-2 SC-SP SC-SP-2 SC-ST SC-ST-WC SC-ST6 SC-WIRE SC-WIRE-WC

Brake Parts

Tanks Liquid Storage Tanks Vertical storage tanks are used primarily for bulk storage and for mobile application equipment nurse setups. These can include fertilizer solutions, agricultural chemicals, plant foods, liquid feeds, and water.

lids. Minimum warranty is three years.

The premium tanks (white) are rated for product which weighs up to 12.5 pounds per gallon. The heavy duty tanks (blue) are rated for product which weighs up to 16 These tanks feature tie-down pounds per gallon. Maximum temslots, built-in graduated gallon indicators, siphon tube, an offset fill- perature is 120°. well, and self-vented, slosh-proof

Durability and convenience at an affordable price. n Rugged polyethylene construction n No welds, joints, or seams to leak or rust n Built-in tie-down, graduated gallon indicator reading n Minimum 3-yr warranty

Tank Cleaning on page 19

Vertical Bulk Storage & Transport Tanks

Tanks & Accessories

Common uses are:

n Water n Fertilizers n Chemicals n Plant foods n Feed

e? Don’t See It Herrry

Call us – we ca tanks from s, Ltd. Norwesco Tank Custom M E. O. Norwesco Roto-molding

Part # TNV25 TNV50 TNV65 TNV75 TNV100 TNV105 TNV150 TNV165 TNV200 TNV210 TNV250 TNV300 TNV500 TNV550 TNV750 TNV1000 TNV1100 TNV1500 TNV1550 TNV1700 TNV2100 TNV2500 TNV3000 TNV4000 TNV5000 TNV6000 TNV6500 TNV7800 TNV10000 TNV12000

Size (gal.) 25 50 65 75 100 105 150 165 200 210 250 300 500 550 750 1000 1100 1500 1550 1700 2100 2500 3000 4000 5000 6000 6500 7800 10000 12000

Dia. (in.) 18 18 23 23 28 23 30 31 30 32 30 35 48 67 48 64 87 64 87 87 87 95 95 102 102 102 120 120 141 141

Hgt. (in.) 29 53 42 50 43 63 56 55 72 69 89 78 72 42 102 79 51 115 65 72 87 89 107 125 152 182 150 176 160 193

Fill Opening (in.) 5 5 8 8 8 8 8 16 8 16 8 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

Outlet (in.) 3/4 3/4 1-1/4 1-1/4 1-1/4 2 1-1/4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3/2 3/2 3/2 3/2 3/2 3/2 3/2 3/2

Price $87.00 V $130.00 V $152.00 V $163.00 V $214.00 V $224.00 V $283.00 V $290.00 V $357.00 V $368.00 V $409.00 V $452.00 V $596.00 V $565.00 V $842.00 V $1,162.00 V $858.00 V $1,557.00 V $1,094.00 V $765.00 K $1,680.00 V $1,902.00 V $2,390.00 V $3,929.00 V $5,378.00 V $6,216.00 V $6,292.00 V $8,078.00 V $10,474.00 V $14,470.00 V

Due to instability in the plastics market, prices are subject to change. Call for current pricing.

Truckload and quantity discounts available!!

Don’t t forget ratche s! strap See pg. 18

www.horvick.com

Tanks Horizontal Liquid Storage NORWESCO’s leg tanks feature molded-in baffles to reduce sloshing when tank is in motion. The 710 and 1010 are the only completely drainable leg tanks available on the market today.

Used primarily for transport and nursing applications. The 1025, 725, 525, and 325 horizontal tanks are available with painted steel bases and galvanized steel bands for mounting on trailers or flatbeds. Tank Part # TNL35 TNL55 TNL65 TNL125 TNL225 TNL325 TNL425 TNL525 TNL1025 TNL1325 TNL5025

Size (gal) 35 55 65 125 225 325 425 525 1025 1325 5025

Dia. (in.) 20 23 23 32 38 38 49 49 49 66 92

Lgth. (in.) 29 33 43 41 49 68 60 71 139 99 190

# of Bands 2 2 2 2 2 2 2 2 4 3 4

Outlet (in.) 3/4 1-1/4 3/4 2 2 2 2 2 2 2 3

Fill Tank (in.) Price 5 $101.00 5 $165.00 5 $190.00 8 $312.00 8 $446.00 16 $545.00 16 $643.00 16 $746.00 16 $1,552.00 16 $1,880.00 16 $10,296.00

Base Part # — — — — — — — BH525 BH1025 — —

V V V V V V V V V V V

Base Price — — — — — — — Call Call — —

Band Part # 60520 61745 61745 61744 60478 60478 60057 60057 60057 63282 63284

Band Price (ea.) $20.48 V $32.21 V $32.21 V $38.46 V $70.18 V $70.18 V $81.14 V $81.14 V $81.14 V $118.31 V $420.00 V

FULL DRAIN SLOPE-BOTTOM LEG TANKS Size 1010 1310 1610 2610 3210

Width Height Length Outlet 47 66 69 90 92

47 76 63 70 74

140 99 140 140 178

2 none none none none

Tank Band Band Skid Band # Skid Price Qty Price (ea) Price 16 $1,591.00 V 4 60585/60584 $83.82 V 6-1010 $1,728.00 V 16 $1,917.00 V 3 63282 $118.31 V 6-1310 $1,477.00 V 16 $2,547.00 V 4 62434 $102.30 V 8-1610 $2,368.00 V $0.00 H 16 flip $4,642.00 V 4 63044/63045 $266.36 V 10-2610-30 16 flip $5,548.00 V 4 62347/62348 $266.36 V 10-3210 $2,740.00 V Fill

Tank Cleaning

Sprayer & Planter

on page 19

These rugged polyethylene tanks are corrosion resistant and lightweight. Ideal for replacement tanks. There are no seams, welds, or joints to leak or rust.

Tank Part # TNS30 TNS55 TNS100 TNS110 TNS150 TNS200-32 TNS200-38 TNS300 TNS400 TNS500

Size (gal) 30 55 100 110 150 200 200 300 400 500

Dia. (in.) 23 23 24 30 32 32 38 38 42 48

1-800-373-4084

Lgth. (in.) 21 34 57 41 46 62 47 68 74 75

Fill Opening (in.) 5 5 8 8 8 8 8 8 8 8

Outlets (in.) one 3/4 one 3/4 one 3/4 two 1-1/4 two 1-1/4 two 1-1/4 two 1-1/4 two 1-1/4 two 1-1/4 two 1-1/4

Tank Price $91.00 V $139.00 V $242.00 V $239.00 V $286.00 V $350.00 V $350.00 V $452.00 V $653.00 V $616.00 V

Saddle Part # SA30 SA55

Saddle Price $149.01 V $177.92 V

SC150 SC150 SC200 SC200-38 SC300 SC400 SC500

$281.10 V $281.10 V $512.39 V $350.55 V $620.64 V $630.39 V $612.96 V

Tanks & Accessories

Tank Part # TNDL1010 TNDL1310 TNDL1610 TNDL2610 TNDL3210

Tanks Below Ground Tanks Part # TNBG2000 TNBG2500 TNBG2600 TNBG2650*

Size (gal)

wdth (in.)

hght (in.)

2000 2500 2600 2650

98 98 98 98

53 53 51 81

lgth (in.) 126 158 155 155

Manhole (in.)

Price

20 20 20 20

Call for pricing and availability.

*Tank includes molded on manhole extension

Septic/Cistern tanks also available from Ace Tanks.

Tank Cleaning on page 19

Spring Specials

Tanks & Accessories

Horvickâ&#x20AC;&#x2122;s carries a wide selection of poly tanks, from many different manufacturers. We cannot list all of the tanks in this catalog. Please contact us if you are looking for a particular brand or style. Listed here are a few of the popular tanks we carry.

Part # TTL1550 TNV1700 TTL2500 TTL3000-Y

Mfg

Gallons

Norwesco Yellow Dome Tank Norwesco Vertical Poly Tank Norwesco Vertical Poly White Tank Norwesco Vertical Poly Yellow Tank 14# rated material, 3â&#x20AC;? outlett

1550 1700 3500 3000

Price

Call for pricing and availability.

Terms & Conditions Net 30 day terms from date of delivery Orders are truckload quantities only. FOB Sheldon, IA Single drop price.

Pickup Truck This tank is molded to fit full-size, American-made pickups. The 325 and 425 gallon size have low profiles for better rear vision. The fill openings are offset to the side

Common uses are:

n Bulk chemicals n Water n Fertilizers

of the tank for safe and easy access. Tanks are made of tough, circular design for strength. All pickup truck tanks will fit the new GM pickup truck beds.

Part #

Size (gal)

Dia. Top (in.)

Dia. Bottom (in.)

Hgt. (in.)

Fill (in.)

TNP425 TNP325 TNP210

425 325 210

65 62 60/51

49 49 48/39

37 32 28

8 8 8

Outlet (in.) 2 2 2

Price $515.00 V $447.00 V $293.00 V

www.horvick.com

Tanks Cone Bottom A full range of cone bottom tanks that enable quick and complete drainage. Molded of rugged, highdensity polyethylene and are both impact and chemical resistant.

Part #

Size (gal.)

TNCBS175* 175 TNCBS300* 300 TNCBS310* 310 TNCBS500* 500 TNCBS750* 750 TNCBS1050* 1050 TNCBS1600* 1600 TNCBS2500* 2500 TNCBS3000* 3000

Dia. (in.)

Hgt. (in.)

42 49 48 60 42 71 48 85 72 65 72 85 88 94 95 104 95 121

Fill (in.)

Outlet (in.)

Price

8 16 8 16 16 16 16 16 16

2 2 2 2 2 2 2 2 2

$674.00 $991.00 $812.00 $1,240.00 $1,634.00 $1,740.00 $2,486.00 $3,566.00 $3,879.00

V V V V V V V V V

Fill 16 16 16

Outlet 3 3 3

Price $879.00 K $1,105.00 K $1,499.00 K

* includes tank and poly stand

Tru-Kleen Cone Bottom Tanks Cone Bottom Tanks Features

Stands TKS-T TKS

Gallons 1600 2000 3000

Dia Hgt 90 94.5* 90 111* 90 142*

Fits 1 600/2000 gallon cone bottoms Fits 3000 gallon cone bottom tank

$1,240.00 K $1,085.00 K

*Height includes stand. Tank is also Yellow

Cone Bottom Tanks By Ace Part # Size Dia Hgt Fillwell CB1200-90B 1200 90 62 16 CB1300-90B 1300 90 65 16 CB1700-86B 1700 86 85 16

Outlet 2 2 2

$933.00 V $1,004.00 V $1,107.00 V

Tanks are blue. White is available.

Due to instability in the plastics market, prices are subject to change. Call for current pricing.

1-800-373-4084

Tanks & Accessories

nn 3â&#x20AC;? MPT outlet nn 5-year warranty nn 10Â° slope nn 16# rated

Part # TK1600 TK2000 TK3000

Tanks Elliptical Leg This elliptical tank style is designed to provide the greatest capacity with the lowest center of gravity, making it the best design available for transporting larger volumes. NORWESCO elliptical tanks feature molded-in legs and flow-through baffles which work together Tank Part #

Size (gal)

to reduce sloshing and provide increased stability during transport. All NORWESCO elliptical leg tanks require full length bottom support as well as support bands.

Wth. Lgth. Hgt. Fill (in.) (in.) (in.) Opening (in.)

TNEL1035 1035 79 TNEL1335 1335 66 TNEL1600 1600 80 TNEL1635 1635 71 TNEL2035 2035 84 TNEL2635 2635 90 TNEL3135 3135 88 Ladder kit for 2635/3135 TNEL4035 4035 92 Ladder kit for 4035

Tank Price

Band Part# (qty)

89 126 126 142 142 140 151

53 55 80 57 55 71 76

16 16 16 16 16 16 16

$1,348.00 $1,935.00 $2,493.00 $2,493.00 $3,260.00 $4,501.00 $5,267.00

V V V V V V V

192

$8,437.00 V

60325 63642 — 60586 62079 60353 62097 60354 62832 63033

Band Price (ea) (3) (3) (4) (4) (4) (4) (4)

$99.80 V $102.30 V — $104.67 V $173.25 V $249.88 V $276.47 V $315.18 V $320.00 V $1,012.06 V

Elliptical Sprayer Designed for larger volume applicator needs the NORWESCO elliptical tanks feature a low-profile design and a low center of gravity for excellent visibility in the field and

Tanks & Accessories

Tank Part #

Size (gal)

TNE300 TNE500 TNE750 TNE1000 TNE1600

Truckload and quantity discounts available!!

300 500 750 1000 1600

increased stability when towed. A deep sump permits complete drainage and the tanks feature a 16” fill-well.

Fill Wth. Lgth. Hgt. Opening (in. (in.) (in.) (in.) 48 57 69 78 78

70 82 88 90 138

36 44 48 55 54

16 16 16 16 16

Tank Price

$570.00 $784.00 $1,067.00 $1,361.00 $2,149.00

Skid Part # V V V V V

Skid Price

PS300RA $499.00 K PS500RA $652.00 K SK750 $1,185.53 V SK1000 $1,342.32V

Due to instability in the plastics market, prices are subject to change. Call for current pricing.

Raven Elliptical Tank

Deep sumped tanks. Sump is 6-1/2” x 12” x 2-1/2”

Tank Part #

Size (gal)

TR200ELC TR200ELC-W TR300ELC TR400ELC TR400ELC-W TR500ELC TR500ELC-W

200 200 300 400 400 500 500

Wth Lgth (in.) (in.) 40 40 48 57 57 57 57

66 66 70 70 70 82 82

Hgt Fill (in.) Opening 26 26 36 36 36 44 44

16” 16” 16” 16” 16” 16” 16”

Tank Price $476.00 $476.00 $547.00 $658.00 $658.00 $753.00 $753.00

Skid Part# V V V V V V V

PS200RA PS200RA PS300RA PS400RA PS400RA PS500RA PS500RA

Skid Price $461.00 $461.00 $499.00 $578.00 $578.00 $652.00 $652.00

K K K K K K K

* W refers to white color tank.

www.horvick.com

Tanks Low Profile Liquid Transport Tank Part #

Description

Size (gal)

TNW1275 TNW1600 TNW2400

low profile low profile low profile

1250 1500 2400

Fill Outlet Hgt Lgth. Width Opening Fitting (in.) (in.) (in.) (in.) (in.) 35 41 50

132 130 150

80 81 90

16 16 16

2 2 2

Tank Price $1,877.00 V $2,241.00 V $3,211.00 V

Tank Cleaning

Specialty

on page 19

Fresh Water Freestanding Tanks

TNSQ12

Spot Sprayer

Tank Part # TNSQ12

Fresh water storage TNFS300 TNFS400 TNFS500 Spot sprayer or TS14 foam marker TS25

Notes —

Size (gal) 12

Hgt (in.) 14

Free Standing Free Standing Free Standing — —

300 400 500 15 25

49 65 70 14 18

Lgth. Width (in.) (in.) 12 18 62 60 74 31 36

29 29 31 14 17

Fill Outlet Opening Fitting (in.) (in.) 5 3/4 16 16 16 5 5

1 1/4 1 1/4 1-1/4 none none

Tank Price $86.00 V $682.00 $857.00 $1,008.00 $79.00 $89.00

V V V V V

Pest Control (PCO) Ideal for nursery, lawn care and commercial turf sprayers. Rectangular in design for easy mounting, these pest control tanks are selfsupporting and do not require a steel skid. Tanks come without bulkhead fittings to allow for customized installation.

1-800-373-4084

Part # PCO-30 PCO-50 PCO-100 PCO-150 PCO-200 PCO-300-R

Size (gal.) 30 50 100 150 200 300

Wth. (in.) 19 19 30 36.5 36.5 37

Lgth. (in.) 25 38 38 48 48 69

Hgt. (in.) 22 20 26 26 35 36

Price $150.00 V $165.00 V $263.00 V $318.00 V $398.00 V $909.00 V

Tanks & Accessories

Application

TNFS400

TNFS500

TS14 and TS25

Mix Tanks Eductor 40/80

Liquid Inoculator

The Eductor allows the operator to either fill the sprayer tank using the venturi (keeping all chemical on the discharge side of the pump), or create a closedloop system between the pump and the Eductor for maximum agitation.

Use for bean inoculants or seed treatment n 3.8 GPM pump n 110V AC or 12V DC n 15 or 30 gallon cone bottom tank n Magnetic nozzle holder n Stand has wheels for easy manuverability n Spray tips sold separately

Features

Improved 2” withdrawl for faster suction.

n 40 or 80 gallon tank n 100-240 flow at 30PSI n Max discharge - 20ft. n Low profile n Works with bulk systems n Slitting & rinse knife–optional n Agitator/Rinse system Available in 2” or 3” plumbing Description Price EDUCTOR-40 $950.00 V EDUCTOR-40-3 $1,195.00 V EDUCTOR-80 $1,200.00 V EDUCTOR-80-3 $1,425.00 V Slicer Kit $450.00 V *Add “-S” to part # for slicer option

Fully-Drainable Mix Tanks

Tanks & Accessories

These mixing tanks come complete with 16” fillwell, stand, and 2” mpt threaded outlet. The outlet is molded into the tank, and allows for complete drainage of the product. n 20, 30, 40 or 65 gallon capacity n 16” fillwell n 2” mpt outlet n Steel mounting stand

Part # LT-INNOC-110-15-HC LT-INNOC-12-15-HC LT-INNOC-110-30-HC LT-INNOC-12-30-HC LT-MAG-ASSY

Description 15 Gallon Model—110 volt 15 Gallon Model—12 volt 30 Gallon Model—110 volt 30 Gallon Model—12 volt Replacement Magnet Assembly

Price $662.00 V $609.00 V $689.00 V $636.00 V $29.00 V

Mix Tank Chemical Induction Packages Chemical induction packages use a 15 or 30 gallon cone bottom mix tank for chemical measuring. The mix tank holds chemical so you can keep your tank full of fresh water. Tank assembly includes: tank, 2” valve, 2” tee, mounting frame, and plumbing to connect to 2” hose.

Tank Assembly Size (gal.) 15 30

Fill Opening (in.) 10 10

Price $219.00 V $255.00 V

Size Outlet Fill Opening (gal.) (in.) (in.) 15 2 10 30 2 10 2” Plumbing Kit Only

Price $99.00 V $113.00 V $54.00 V

Part # MTA-15 MTA-30

Tank Only Part # TMFD-20

Description 20 gallon full drain mix tank/stand TMFD-30 30 gallon full drain mix tank/stand TMFD-40-M 40 gallon Magnum (Pictured) TMFD-65 65 gallon full drain mix tank/stand

A (in.) B (in.) Price 41 17 $154.00 W 49

$171.00 W

$250.00 W

$275.00 W

Part # TM15 TM30 MTA-PK

Stand Only Part # MTS-15 MTS-30

Accessories

Price $79.00 V $89.00 V

05785 Band Strap Bkt WEBBING 2” Webbing strap, per ft.

$3.30 V $0.79 V

www.horvick.com

Tank Parts Tank Bulkhead Fittings and Gaskets

Size (in.)

Manifold Banjo

Norwesco

Part #

Hole Size(in.) Price

EPDM Gasket Part #

Price

Viton Gasket Part #

Price

60401 3/4 1-7/16 $5.11 V 60402 $1.14 V — — 60427 1 2-1/4 $6.41 V 60404 $1.59 V — — 60403 1-1/4 2-1/4 $6.41 V 60404 $1.59 V — — 60124 1-1/2 3 $9.61 V 60406 $2.19 V 60523 $40.48 V 60405 2 3 $9.16 V 60406 $2.19 V 60523 $40.48 V 63683 2 3-1/4 $13.20 V 60336 $3.49 V 60008 $47.84 V 62299 3 4-1/2 $40.23 V 60331 $8.00 V 60351 $64.14 V 62171 4 5-3/4 $131.01 V 62785 $28.77 V 62786 $138.26 V 60335 2” siphon tube $6.27 V 60327 3” siphon tube $11.36 V 62714 4” siphon tube $108.05 V TF150AV 1-1/2 3 $30.61 H Anti-Vortex with Viton Gasket TF200AV 2 3 $30.61 H Anti-Vortex with Viton Gasket MTF220BD 2” MTF300BD 3” MTF220 2” MTF300 3”

3.25” 4.5” 3.25” 4.5”

$31.16 $54.49 $30.64 $52.27

H H H H

220 300 220 300

Series Series Series Series

Manifold Manifold Manifold Manifold

Flange, Bottom Drain Flange, Bottom Drain Flange Flange

Stainless steel fittings & bolted fittings are available. Call for more info.

Tank Lids and Parts Part #

60011

RL-10S

63485

60002

60322

16” Locking Lid Complete with Fillwell Ring Will Retrofit Norwesco 16” lids. 180° hinged lid. 6-Point Bayonet locking. Ball vent and twist-lock gasket.

Norwesco

60019

60011 60019 60012 60002 60003 60030 60322 63484 63485 RL-10S RFW-10

Description

Size (in.)

Threaded lid with 4” vent Vent Assembly Fill Well Ring Only Threaded Lid With Vent Fill Well Ring Only Lid, Locking Tabs Lid, Threaded (Buttress) Lid, New Style Lid, With Snap In Vent Lid, Screw-On Fill Well

16 4 16 8 8 7 5 5 16 10 10

Price

$28.13 $11.41 $9.48 $14.96 $7.56 $60.48 $11.34 $8.81 $29.84 $21.18 $14.40

Norwesco Flip Top Lid Norwesco 16” Flip lid Part # 62532

$90.30 V

Part # ROAD WARRIOR

$55.00 V

1-800-373-4084

V V V V V V V V V V V

Tanks & Accessories

Tank Lids

Tank Odds & Ends hudson

Water Control Valve

nnMaintains a consistent water level. Installs in seconds! nnOperating pressure limits range from 8 PSI to 140 PSI. Pipe thread is 1” female. nnThis water valve is rust proof, operates without siphoning, and can handle a high volume of water. Furthermore, this valve is virtually indestructible, with no level arm and no float ball.

Polypropylene Vent Cap ®

nn 2” male NPT nn Glass reinforced polypropylene 2” Vent Cap with 30 mesh screen Part # VC230

$20.02 H

Water Control Valve Part # FLOAT-HV

2” Vent Cap (without screen) Part #VC200

Repair Kit Part # FLOAT-RK

3” Vent Cap (witH screen) Part # VC330

Tank agitators are designed to produce effective and efficient agitation of all tank solutions. They are constructed of tough, chemicalresistant polypropylene for years of service.

The three styles of agitators and the T-fitting provide great flexibility and convenience in mounting.

$34.95 V

$17.57 H

$12.50 V

$33.86 H

AGITATORS (three styles)

Hypro 3371

Part # Description 3371 Hypro T10-VH A&M T34TE Tee 3371-0028 Hypro Hi-Vol

A&M T10-VH

Inlet Size Outlet (in.) Size (in.) 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4

Price $5.00 H $5.00 H $5.61 H $39.50 H

Flow Chart for T10-VH Agitator Hypro 3371-0028 T-FITTING

Tanks & Accessories

Tank Agitators

Orifice Color Orifice Dia. Inlet Flow Outlet Flow (in.) (GPM) (GPM) yellow 1/8 2.9 9.5 red 5/32 4.1 13.2 blue 3/16 5.3 15.4 white 1/4 6.5 19.5

Tee T34TE

1” & 2” Ratchet Straps nnStrong tie-down security for any type of load nnNylon belting for tough holding action 1”-20’ 1000 lb. mini-ratchet Part # RS-1

$15.95 V

2”-27’ 5000 lb. ratchet Part # RS-5

$28.95 V

www.horvick.com

Tank Cleaning Rotating Tank Rinse Nozzle nnRotating head driven by the flow of the rinsing liquid through multiple round spray orifices. nnRemovable retainer and rotating body allows for disassembly and cleaning. nnProvides 360° coverage of inside tank diameters up to 10 feet. nn3/4” NPT Part # 55270-3/4-18-POM

$88.26 H

Tank Cleaning Agent NUTRA-SOL cleaning agent is designed to clean sprayers. Removes dirt, scale and rust from spray booms and tanks, as well as neutralizing the chemical action of spray chemicals. Nutra-Sol is completely soluble. Recommended to be used for flushing sprayers after each time used. Reduces corrosion in tanks and pumps. 1 pound (2 cups) to be mixed with 100 gallons of water for flushing system. Comes in 2 pound container.

$11.00 V

All Clear Decontaminator This nozzle eliminates triple Part # JET RINSE rinsing of chemical con$36.95 V tainers. Use it on plastic Replacement Handle or metal containers. The nozzle directs water in five Part # JET RINSE-HNDL directions to power rinse $28.00 V the container. Container residues go directly into the spray tank.

ANTI-FOAM eliminates unwanted foaming in spray applications involving recirculating sprayers and other high agitation equipment. For best results, add ANTI-FOAM to solution prior to foaming. If foam already exists, add ANTI-FOAM until foam is eliminated. RATE: 1/2-1 oz. ANTI-FOAM per 100-gallons of solution.

$16.50 NET

1 gallon tank decontaminator Part # ALL CLEAR

$31.00 NET

Unfoamer

Anti-Foam

Part # ANTI-FOAM 1 quart (12 per case)

ALL CLEAR is specially formulated to remove pesticide deposits and other debris, including oily substances from tanks, hoses, boom, filters, screens and nozzles.

UNFOAMER 1 quart (12 per case)

Unfoamer™ Antifoaming/Defoaming Agent is designed to effectively control foam in water-based fertilizer and pesticide spray mixtures. Unfoamer can reduce mixing time by facilitating faster and more accurate filling. Antifoaming/Defoaming Agent Part # UNFOAMER

$23.00 NET

1-800-373-4084

Tanks & Accessories

Part # NUTRA-SOL

Jet Rinse

Utility Sprayers ATV Skid Sprayer 100 Gallon Sprayer ATV-SKID-100 ATV-SKID-100E

Description 100 gallon low profile tank, 4 HP Honda/centrifugal pump 10 GPM 100 gallon low profile tank, 7 GPM 12v electric pump 48”w x 58”L

Price $1,950.00 K $1,725.00 K

Add desired options below for completed unit.

Tanks & Accessories

Features nnAdjustable swing-away control arm nnTwo or three valve shut-off nn Factory installed hose reel, 30ft. hose and wand.

Part#

Description

Price

BOOM-18 BOOM-12 BOOMJET BOOMLESSJ BOOMLESSHYPRO

Boom—18’ / 256” Coverage Boom—12’ / 160” Coverage Boomless BoomJet (Brass) 35’ Boomless TeeJet (Plastic) 32’ Boomless Hypro (Stainless) 34’

$456.00 $309.00 $275.00 $205.00 $260.00

K K K K K

nnLiquid filled gauge nnPressure regulator nnTeeJet components nnTank completely empties nnAnti-vortex baffles

ATV Mini Skid Sprayer 50 Gallon Sprayer ATV-SKID-50G ATV-SKID-50E

Description 50 gallon low profile tank, 4 HP Honda/centrifugal pump 10 GPM 50 gallon low profile tank 7 GPM 12v electric pump, 38”w x 42”L

Price $1,850.00 K $1,625.00 K

Add desired options below for completed unit. Part#

Description

BOOM-18 BOOM-12 BOOMJET BOOMLESSJ BOOMLESSHYPRO

Boom—18’ / 256” Coverage Boom—12’ / 160” Coverage Boomless BoomJet (Brass) 35’ Boomless TeeJet (Plastic) 32’ Boomless Hypro (Stainless) 34’

Price $456.00 K $309.00 K $275.00 K $205.00 K $260.00 K

Features nnAdjustable swing-away control arm nnTwo or three valve shut-off nn Factory installed hose reel, 30ft. hose and wand.

nnLiquid filled gauge nnPressure regulator nnTeeJet components nnTank completely empties nnAnti-vortex baffles

www.horvick.com

Demco Sprayers Tandem Axle ATV Sprayer Demco’s ATV Sprayer features either a 150- or 200-gallon poly tank with jet agitation, 10” or 15” height adjustment, 22 x 11 x 8 tires, 44” to 90” adjustable wheel spacing, 2-1/2 gallon fresh water tank, gas engine (Honda or Briggs) driven roller pump, and 21’ or 28’ spray boom

Demco Lawn & Garden Sprayers

150/200 Gallon 3-Point

Description

ATV-200-B-21 ATV-200-H-21 ATV-200-B-28 ATV-200-H-28 ATV-150-B-21 ATV-150-H-21 ATV-150-B-28 ATV-150-H-28

200 gallon, 3.5 HP Briggs, 21’ boom 200 gallon, 4 HP Honda, 21’ boom 200 gallon, 3.5 HP Briggs, 28’ boom 200 gallon, 4 HP Honda, 28’ boom 150 gallon, 3.5 HP Briggs, 21’ boom 150 gallon, 4 HP Honda, 21’ boom 150 gallon, 3.5 HP Briggs, 28’ boom 150 gallon, 4 HP Honda, 28’ boom

Price $6,710.00 K $7,110.00 K $6,830.00 K $7,230.00 K $6,475.00 K $6,875.00 K $6,595.00 K $6,995.00 K

Demco’s RM series 3-point sprayer features either a 150 or 200-gallon poly tank, parking legs. Either will accept a 28’ or 30’ truss style spray boom. Several plumbing options are available. Part # Description Price 3PT-150 150 gallon tank, CAT 1 & 2 carrier $1,329.00 K 3PT-200 200 gallon tank, CAT 1 & 2 carrier $1,475.00 K Complete 3-Point Sprayers. Includes carrier, tank, PTO roller pump, 21’’ or 28’ boom, and manual control plumbing kit. Price assembled. Part # Description Price RMU153-21T 150 gallon with 21’ boom $2,729.00 K RMU153-28T 150 gallon with 28’ boom $2,859.00 K

300, 400 & 500 Gallon 3-Point

Demco’s RMLE series 3-point sprayer features either a 400- or 500-gallon low profile poly tank, retractable storage stand (when empty), and clean water tank. Either

will accept a 45’, 50’ or 60’ floatation style spray boom, or the new X-fold 60’ boom. Several plumbing options are available.

Part # Description 3PT-300 300 gallon, CAT 2 or 3 carrier 3PT-400 400 gallon tank & carrier 3PT-500 500 gallon tank & carrier Complete 3-Point Sprayers. Includes carrier, tank, hydraulic centrifugal pump, 45’ or 60’ boom, and electronic control plumbing kit. Price assembled. 3PT-300-21T 300 gal. 3 pt. 3PT-300-28T 300 gal. 3 pt. 3PT-400-45 400 gal. 3 pt. w/ 45’ boom 3PT-400-60 400 gal. 3 pt. w 60’ boom 3PT-400-60X 400 gal. 3 pt. w 60’ hyd. X-boom 3PT-400-60X-3 400 gal. 3 pt. w 60’ hyd. X-boom, triple nozzles

Note: Shown with optional features. X-Fold boom pictured. Call for pricing.

1-800-373-4084

3PT-500-45 3PT-500-60 3PT-500-60X 3PT-500-60X-3

500 gal. 3 pt. w/ 45’ boom. 500 gal. 3 pt. w/ 60’ boom. 500 gal. 3 pt. w/ 60’ hyd. X-boom. 500 gal. 3 pt. w/ 60’ hyd. X-boom, triple nozzles.

Tanks & Accessories

Shown with optional hose reel and handgun.

Part #

Demco Booms 21’ and 28’ Truss Style Booms

Demco’s truss style booms feature a heavy duty truss framework with heavy wall tubing, vertical and horizontal wing break-aways, and QuickJet plumbing with rubber hose.

Demco Truss Style Booms

Unassembled

w/ QuickJet Plumbing Part # DB21TB DB21TS DB21TDF

Description 21’ boom, no plumbing 21’ boom, Std. QuickJets, 1/2” hose 21’ boom, drip-free plumbing

Price $556.00 K $815.00 K $898.00 K

45’ Manual Fold Truss Style Boom

Part # DB28TB DB28TS DB28TDF

Description 28’ boom, no plumbing 28’ boom, std. QuickJets, 3/4” hose 28’ boom, drip-free plumbing

Price $623.00 K $969.00 K $1,055.00 K

Demco’s truss style booms feature a heavy duty truss framework with 1-1/4” and 1” heavy wall tubing, vertical and horizontal wing break-aways, 3/4” QuickJet plumbing, 3/4” rubber hose, and wing tip end protectors.

Sprayer Booms

Unassembled Demco Truss Style Booms w/ QuickJet Plumbing Part # DB45DF DBFT DBSAL

Description 45’ boom, diaphragm QuickJets, 3/4” hose Flotation boom mount Auto boom leveler

Price $2,508.00 K $811.00 K $565.00 K

Options Part # DFBTP 09801 TW2

45’ and 60’ Flotation Boom

Description Boom tip protector (pictured) Replacement wheel/tire Replacement bearing

Price $203.00 K $53.79 K $14.95 K

Demco’s DFB series flotation booms feature an auto level and a shock and spring flotation system. This makes for an extremely smooth boom ride in the field. Other features include reinforced hinges, heavy duty boom latches, 3/4” QuickJet plumbing, 3/4” rubber hose, spring loaded break-aways, and horizontal folding hinges for less chance of chemical exposure.

Demco Floatation Style Booms Part # DFB45B 9428051 DFB60B 9428053 Options DFBTP

Description 45’ Flotation boom, less plumbing TeeJet No-drip Nozzle Kit - 45’ 60’ Flotation boom, less plumbing TeeJet No-drip Nozzle Kit - 60’ Boom tip protector

Price $4,186.00 K $756.00 K $5,043.00 K $997.00 K $203.00 K

Unassembled 22

www.horvick.com

Demco Tractor Mounted Tanks Side Mounted Tanks

Demco’s side mounted tractor tanks fit most front wheel assist tractors. Available in 300-, 400-, or 500-gallon total capacity. They feature Quick Tach mounting hardware, so the undercarriage may remain on the tractor and the tanks can be easily removed. The tanks are a cut-away design for better visibility from the cab. Also models for 2WD Tractors and J. Deere 8000T Series.

For Front Wheel Assisted Tractors

400-Gallon 500-Gallon

Case/IH Mechanical FWD DSM-470-MFD DSM-570-MFD 7100, 7200, 8900 Series $3,870.00 K $3,990.00 K JD 7000 Series DSM-740-MFD DSM-750-MFD $3,870.00 K $3,990.00 K JD 4000 Series DSM-460-MFD DSM-560-MFD $4,230.00 K $4,345.00 K JD 8000 Series — DSM-950-MFD (High Clearance) $3,899.00 K JD8000T Series

500-Gallon 600-Gallon DSM-JD8T-500 DSM-JD8T-600 $3,539.00 K $3,895.00 K

400-Gallon 500-Gallon Standard 2-wheel drive DSM-400 DSM-500 $3,000.00 K $3,119.00 K

“Quick Tach” Inline Tank Unit For Mechanical Front Wheel Drive Tractor

nnThe Demco’s inline tanks are available in two sizes: 200 or 300 gallon capacities. They feature dual jet agitation, sump, molded sight gauge and fillwell with no-splash cover. The 300 gallon tank has a poly baffle. Linear alignment and rear placement provide better visibility from the tractor seat. nnHigh clearance brackets include saddles, tank bands, carrier brackets and all necessary bolts for a complete installation. Bracket placement allows 30” of ground clearance. nnTransport width: 16’ 6” NOTE: Do not exceed the tractor manufacturer’s frame load capacity recommendation. NOTE: Not applicable on tractors with front duals. NOTE: 60” front wheel spacing required when using 300 gallons tanks. NOTE: 32” maximum front wheel diameters

1-800-373-4084

For most popular Case IH, and John Deere tractors. Call for details!

Sprayer Tanks

For Two Wheel Drive Tractors

Demco Tractor Mounted Tanks Front Mounted Tanks Demco’s front mounted tractor tanks fit most John Deere and Case/IH 2-wheel drive tractors. They feature a low profile poly tank (300-gallon), Quick Tach mounting brackets, and mounting hardware. Part #

Description

Price

DFM300-CI7100 For Case/IH 7100/7200 & 8900 Series $2,265.00K DFM300-JD8000 For John Deere 8000 Series $2,325.00K DFM300-JD7000 For John Deere 7000 Series $2,325.00K

700 & 1000 Gallon Sidequest Side Mounted Tanks

Dual Wheeled Unit Features

Sprayer Tanks

n HIGH CAPACITY SIDE MOUNT TANK DESIGN Choose either 700 or 1000 gallon capacity with 16” fillwells. Delivers excellent front to rear weight distribution ratio. (25% front: 75% rear) Extended rear axle spindle mount allows weight to be shifted to the rear relieving stress on the tractor’s front axle and chassis. Unites will fit on tractors with or without front duals. Rear duals are required. n BETTER VISIBILITY - Tanks are mounted longitudinal for superb visibility. Choose either high or low clearance for visibility and crop clearance. n COMFORTABLE TRANSPORT WIDTH - 16’ 4” when straddle duals are set on 120” centers. n ROLL-A-WAY JACK STANDS - for easy installation and removal. (Optional) n FLANGED FITTINGS - Provide leak free plumbing.

NOTES: n Aftermarket dual hubs may require different mounting bolts. n Hub spacer assembly is designed for tractors with 20.8 or narrower rear tractor tires. n Front fenders need to be removed on most models. Factory setup is standard for 3-point frame and boom assembly.

Track Unit Features n HIGH CAPACITY SIDE MOUNT TANK DESIGN - Choose either 700 or 1000 gallon capacity with 16” fillwells. n BETTER VISIBILITY - Tanks are mounted longitudinal for superb visibility. n Comfortable transport width.

www.horvick.com

Liquid Tank Trailers Low Boy Wagon For Liquid Tanks.

Optional Features:

Pricing.

Low Boy Liquid Tank Wagon Part # SLB1610

n Spring lift assist tongue n Extendible hitch n 120” rear axle n Brakes:2 or 4 wheel hyd. surge n Lights n 16.5L or 21.5L tires n 18” x 72” side platforms

Sprayer Tanks

n 60” front track, 92” rear. (120” optional) n 8 bolt hubs n 23,000 GVWR n Front mesh walkway n 5th wheel steering n Floatation tires Call For

Cone Bottom Wagon 1,200 Gallon Part # SLB1200CB 1,700 Gallon Part # SLB1700CB

6,000 & 9,000 Gallon Cone-Bottom Tender Trailer For Temporary Field Storage of Liquid Fertilizer n Cone-bottom poly tanks n Hydraulic wagon lift n Hold down bands n Tongue Jack n Adjustable clevis hitch n Optional plumbing packages

Call For Pricing.

Cone Bottom Tender Trailer – 6,000 Gallon Part # DCW-3000

1-800-373-4084

Cone Bottom Tender Trailer – 9,000 Gallon Part # TCW-3000

Spray Trailers Spray Trailers

Call For Pricing.

Sprayer Tanks

n 7000# Axle n 4 Wheel Electric Brakes n Light Kit n 1200 Gallon Tru Kleen Tank n Lower Hand Rail n Highway Tires.

Spray Tote The Horvick Spray Tote has been designed to pull behind a digger. Large flotation tires easily carry the load.

Standard Features Call For Pricing.

with 14L x 16.1â&#x20AC;? tires Part # SPRAY TOTE-14L

with 16.5L x 16.1â&#x20AC;? tires Part # SPRAY TOTE-16.5

n 1010 Gallon Slope-bottom poly tank n Pull-behind design n Floatation implement rib tires n Heavy duty tank support

Optional Features n Auto Rate Control n Various Plumbing Packages

www.horvick.com

Duo-Lift Products Duo-Lift Cone Bottom Tandem Wagon Horvick’s offers several sizes of portable nurse tanks. Each uses Duo-Lift’s heavy duty tandem axle wagon. Standard equipment includes a structural steel frame, heavy duty axles with underslung spring suspension, adjustable clevis hitch, D.O.T. safety chains, a pump/engine mounting platform, tank hold-down hoops, and hose storage hooks.

HT-1200CB:

HT-1300CB Is the same as the HT-1200CB with 1300 gallon tank. Options for HT-1200 and HT-1300:

HT1200CB Tandem Wagon

Pump and plumbing, Surge hydraulic or electric brakes. High speed axle with truck tires

HT-1200CBP: Same as standard HT-1200CB with 5’ frame extension. 48” x 71” 2” treated wood deck with 12” railing, Removable on drivers side, 10,000 lbs. drop leg jack.

HT-1700CB: Fully drainable 1700 gallon tank. 2300lbs GVW. 10,000 lbs. drop leg jack, 2” x 8 leaf under slung, slipper springs suspension, 2 wheel surge brakes, DOT light, 11x22.5 New truck tires.

HT-1700CBP: Same as above only with 5’ frame extension and 4’ x 74’ wide 2” wood platform.

HT-1700CB

Call For Pricing.

Packages HT-PK Plumbing Packages

Plumbing packages include a gas engine with a 2” pump, tank shut-off valve, suction line, and 25’ of discharge hose with nozzle valve.

Chemical Induction Packages

Chemical induction packages use either a 15-gallon or 30-gallon cone bottom mix tank for chemical measuring and holding chemical so you can keep your tank full of fresh water.

1-800-373-4084

Sprayer Tanks

Fully drainable cone bottom 1200 gallon tank, 1600 lbs. GVW, 7” structural channel frame, 6 leaf under slung, slipper springs suspension, tear drop fenders, 2000lbs top wind jack, 12.5L x15 implement tires standard.

Duo-Lift Products Blue Mule™ Duo Steer The Blue Mule™ Duo Steer by Duo Lift is a 4-wheel steer unit designed for your strip till machine, planter, field cultivator and more. The “E-Z Lock” system locks the rear axle in the fixed position for road use or steerable position for field use in seconds by the flip of a lever. No disconnecting or connecting of tie rod necessary.

Available in 1000, 1200, 1600, 2000 and 2600 gallon tanks.

Sprayer Tanks & Trailers

Features n New models DS1600D and DS1600A-D. “Duo Purpose Duo Steer Wagon” have fixed or adjustble width axles; a 1600 gal. center drainable tank; and quick-change mount that includes a quick-change twin 1000 gal. NH3 tank mount or quick-change single 2000 gal. NH3 tank mount. n New models DS2100 and DS2100A accommodates one 2000 gal. NH3 tank. n 19.4. x 26 10-ply lug tires. n All fixed track Duo Steer Wagons have easily removed spindles for replacement and narrower factory truck shipping width. n A pivot support has been added to the rear steering frame. n Two clamping plates per strut assembly on DS1600A – DS2600A. n Safety chains remain on tongue with a pin-on double clevis.

Shown in fixed postion for road use.

Call For Pricing.

Shown in steerable postion for field use.

Options n Electronic scale available on DS1600D and DS1600A-D n Bolt-on pump support plate for a hydraulic drive chemical pump n Side mounted bolt-on 5 gal. wash water tank

Super Cart Call For Pricing.

Available with 2035 or 2600 gallon tanks.

The Super Cart is for big jobs. Utilizing an extremely heavy duty 10” x 10” frame, this 2035 gallon unit is designed to be pulled between the tractor and the implement. Standard features include an 120” track, adjustable front hitch, 3 1/2” spindles, drop-leg jack, 10 bolt 15,000# hubs and a rear fixed hitch. Many plumbing options are available. Please call for details.

www.horvick.com

NH3 Tank Wagons Duo Lift Tank Trailers Duo Lift manufactures a heavy duty line of reach pole running gears with 5th wheel steering and excellent towing characteristics for anhydrous ammonia or liquid solution tanks. Models are available to fit 1000, 1450, 2000 gallon NH3 tanks, or two 1000 or 1450 gallon tanks side by side.

M-1000/1450

M-2000

M-1000

Wheel Base Ground Clearance

M-1450

12,000 14,000 1,000 1,450 60– 80” 60– 80” adjustable or fixed 108–120” 108–120” 16” 16”

M-2000

M-2200

M-3200

20,000 2,000 60– 80” fixed 168” 20”

20,000 2–1000 86” fixed 120” strd 22”

32,000 2–1450 102” fixed 120–145” 22”

M-2200/3200 Low Boy NH3 Wagon

For Dual Nh3 Tanks. (1000 or 1450’s) LB-2200

LB-2900

GVW 23,000 32,000 Hubs 8 bolt 8 bolt Front Track 60” 60” Rear Track 92” 108” * Tires 16.5” * 21.5” * *Note: indicates other sizes avaliable.

Twin NH3 Tank Wagon

Optional Features: n Lights n Brakes n Spring Lift Assist Tongue n Extendible Tongue n Fenders (LB-2900) n 108”/120”/144” Rear Track n 92.5 or 98.5” Rear Track (LB-2900) n Tandem Rear Axle n Side Platorm n Liquid Tank Platform

1-800-373-4084

Dual Tank Trailers Capacities up to Two 2000 gallon Tanks

NH3 Equipment

GVW Capacity (lbs) Tank Size (gal) Track Width

Optional Features: n BRAKES: Electric or hydraulic surge n TONGUE: Cushion, extendible, or spring lift n TIRES: 11L x 15, 12,5L x 15, 16.5L x 16.1, or 21.5L x 16.1 n OTHER: Liquid tank or skid, tank decals, water bottles, side folding ladders, safety kits, and hose kits

Fertilizer Movers 5, 6, 8 & 10 Metric Ton Models Available

Vertical Hopper

Fertilizer Blending Systems Setting the Pace in Blender Design nnOne large diameter tapered variable pitch screw does it all. nnComplete and quick blending action (approx. 10 to 15 sec. per ton after the vessel is loaded nnOnly one, externally mounted bearing to service. nnCam-Action slide gate, manual, air, electric and hydraulic.

nn16” and 24” wide 304 Stainless Steel out-load conveyors with enclosed take-up; “Quick-latch” load hopper; belt and covers. nnStandard lengths 27’ and 32’, other lengths available. nnBlender vessel, in-load hopper, motor mount, belt guard, support legs and gate manufactured from 304 Stainless Steel. nnCapacity stated is in metric tons (2200#) based on 58# material.

Bucket Elevators

Designed For Fertilizer & Granular Free-Flowing Products nnCompletely enclosed, single-leg construction. nnHorizontal and vertical seams are continuously welded nnHeavy gauge stainless steel. nnBoot is equipped with clean-out slides and removable bottom pan. nnLinear polyethylene buckets and PVC belting are standard.

Conveyors

Our heavy-duty bucket elevators move up to 120 tons an hour to discharge heights of 7 to 70 feet. (Higher available.)

nnOther Speed King features include stainless steel take-up bolts and nuts, dust seals and shields for all shafts, silicone rubber sealant at flange joints, stainless steel belt splice, sealed greasable ball bearings throughout.

Honeycomb Belt Conveyor High Capacity at Steep Angles nnHoneycomb BeltVeyors efficiently move and protect your seed. Up to 6,000 bu./hr. capacity at 40° angle. nn10” tube available in sizes ranging from 20–70 ft. nnHoneycomb cups molded from the top layer of the belt—not vulcanized like cleated belts. nnIn-plant and TR models available.

Rapat Series CU Conveyor The Series CU (Car Unloader) Conveyor is the answer for unloading bulk materials such as beans, grains, and fertilizer from controlled-opening hopper-bottomed railcars and trailers.

SPECS: nn90 tons of material per hour on 24” wide belt nn8’ horizontal section nn5’, 6’, or 8’ adjustable incline section nnElectric or hydraulic powered

Part # CU8624

Call for pricing.

www.horvick.com

Belt Conveyors Universal Industries UniTube® 1500 Series Tube Conveyor The UniTube® 1500 Series Tube Conveyor is ideal for handling a wide variety of materials including corn, soybeans and other grains.

* Capacity varies on elevated angle, material moisture and density.

Universal Industries UniTube® 2200 Series Tube Conveyor

For even higher capacity Universal offers the 2200 series UniTube® Belt Conveyor. Great for any high-capacity grain handling along with corn, soybeans or any seed handling.

Need to pile outdoors?

The 2200 UniTube® is ideal for you. Also ideal for abrasive products like fertilizer, sand, salt or crushed glass.

nnThe 2200 series is available in lengths of 35’ to 95’. nn14” tubing houses a 22” wide 2-ply chevron belt nnCapacities up to 10,000 bushels per hour*. nnA spring loaded collapsible hopper is standard on each unit and wind guards are optional on the 35’ to 55’ conveyors (standard on 65’ and longer). nnPTO or electric motor drives are available. nnMade in USA, the heavy duty construction of our UniTube® will outlive similar sized augers by 4 times!! * Capacity varies on elevated angle, material moisture and density.

1-800-373-4084

Conveyors

nnThe 1500 series is available in lengths starting at 35, up to 85’. nnCapacities range from 3,000 to 6,000 bushels per hour*. nnA 15” 2-ply chevron belt is housed in a 10” diameter tube. nnA spring loaded collapsible hopper is standard on each unit and wind guards are optional on the 35’ to 55’ conveyors (standard on 65’ and longer). nnPTO, electric, hydraulic and gas drives are available. nnMade in the USA, The UniTube® has heavy duty construction to last year after year.

Belt Conveyors Universal Industries UniTube® Self-Propelled Belt Conveyor Option For UniTube 1545 Simplifies maneuvering and positioning the conveyor. The UniTube conveyor and all hydraulic functions on the self-propelled package are powered by a 20 HP V-twin Honda engine. A single control valve, equipped with variable speed hand levers and joy stick, provide smooth, precise control for moving, raising or lowering the conveyor.

Universal Industries 1535 Short Field Loader Features:

Conveyors

nn3,500-6,000 bushels per hour — capacity varies on elevated angle, material moisture and density. nnShorter hopper length allows placment closer to bins. nnDischarge height still reaches grain wagons and trailers. nnLow hopper profile easily fits under bins or wagons. nnSame capacity as standard Field Loader. nnCompact unit for indoor and outdoor use.

Universal Industries Drive Over Belt Conveyor Features: nn10,000 bushels per hour — capacity varies on elevated angle, material moisture and density. nn14” diameter 12 gauge tube. nnAvailable in carbon or stainless steel. nn22” 2-ply Chevron belt. nn300-550 FPM belt speed. nnElectric, hydraulic or gas drive options.

www.horvick.com

Simonsen Spreaders SMC Pull Spreaders Standard Features:

Spreaders & Tenders

n Stainless steel used in critical corrosion areas n 7” wide conveyor apron n 50’ spread width n Floating tandem suspension n 540 RPM PTO drive n Apply 85 to 640 lbs. per acre n Single distributor fan n Rope trip controls on wheel drive n Gearbox fan drive n Chain and sprocket drive n Dual range sprockets n Fewer moving parts n Simonsen quality.

5, 6 or 8-Ton

SMC 1752 High Clearance Spreaders Standard Features: n 5 ton capacity n 170 cu ft. n 72”-120” track width n Hydraulic wheel drive n 40” clearance to spinner n Stainless construction n 85-640#/acre Part # SMV1752HC

1-800-373-4084

Simonsen Tenders SMC Tenders A Tradition of QUALITY...

Spreaders & Tenders

Let us show you how well a tender can be built. Rugged all-steel, allwelded construction means these tenders can be worked hard, every day for many years. Standard equipment includes stainless steel in critical corrosion areas for extended life. Steep side slope for better cleanout40° on the sides, 35° on the ends. The fertilizer will slide out quickly and easily.

10 or 16-Ton

BFT Tenders Truck or Trailer Mount n BFT Tenders available in 17,20 or 26-ton capacity with 2,3,or 4 compartments with splits available. Unloading capacity of up to 4,000 lbs. per minute. n Individual 14” x 18” slide gates let you unload any compartment. 40° side slope on all compartments provide fast unloading. n All hydraulic controls are in front for easy access. n Heavy-duty delivery auger folding mechanism is hydraulically operated for efficiency and ease of operation. n Clean-out door on delivery auger.

17, 20 or 26-Ton

www.horvick.com

PTO Pumps SRS Crisafulli PTO Slurry Trailer Pump

Built with heavy structural steel tubing and it’s casing and impellers from 3/8” steel plate. These pumps are designed for long, useful lives in harsh environments. Self-priming pumps have now screens, suction hose or check valves.

Call for pricing and application sizing.

12” & 16” Standard Trailer Pump nnHydraulically actuated slurry gate. nnA 7ft. wide single wheel base. nnExtended discharge pipe for easy hose connections. nnPatented bearing protection system protects submerged bearings. nnRemote lube lines — grease bearings while operating. nn3ft. hydraulically controlled axle nn540 & 1000 RPM models nnArticulation base hitch increases freedom of movement.

PTO Dual Discharge Trailer Pump

12” Trailer Pump nn3,000 gallons per minute nn15 ft. T.P.H nn12” Dual discharge nn12” impeller

Call for pricing

1-800-373-4084

Spreaders & Tenders

Agitate, mix and pump viscous or solidified sludges with SRS Crisafulli’s more efficient and long lasting PTO powered slurry pumps.

Banjo Gas-Driven Transfer Pumps

Pumps & Meters Pumps & Meters

Banjo 200 and 300 Series Cast Iron Centrifugal Pumps

Banjo’s cast iron, self-priming centrifugal pumps can be used for transfer of fertilizer, chemical, and water. Available in 1-1/2”, 2”, and 3” sizes. These pumps feature a stainless steel shaft sleeve, a carbon ceramic seal with stainless steel Part #V 200CI-5.5H 300CI-8HR 300CI-8H 300CI-13H 200-POI 300-POI *Electric Start

Manifold Flanged Pumps Available

Engine 5.5 Honda 8 HP Honda 8 HP Honda* 13 HP Honda* 2” Pump only 3” Pump only

In 2” 3” 3” 3” 2” 3”

housing and viton parts, replaceable inlet and outlet flanges, and a balanced impeller. These pumps are also available in stainless steel.

Out 2” 3” 3” 3” 2” 3”

Price $805.00 K $1,575.00 K $1,759.00 K $1,899.00 K $432.00 V $990.00 V

Seal Kit # RS245V RS11558V RS11558V RS11558V RS245V RS11558V

Price $53.00 H $85.00 H $85.00 H $85.00 H $53.00 H $85.00 H

Wet Seal Bearing Pump Part # Description Price 200CIW-5.5H 2” wet seal Cast iron centrifugal pump—5.5 HP honda $1,419.00 K 300CIW-13H 3” wet seal cast iron centrifugal pumps—13 HP honda $2,773.00 K

Replacement/Repair Parts – See Page 160

Banjo 222 Series 2” Cast Iron Centrifugal Pumps More gallons per minute – higher pressure! n Maximum engine protection. n Pump end separated from engine. n Heavy duty slinger seal on motor shaft. n Large weep holes between pump end and engine. n “V” shaped for quicker priming.

Part #

Description

222PI-6H

2” Cast iron pump, 6.5 HP Honda OHV engine 2” Cast iron pump only, for 6.5 HP gas engines 2” Cast iron pump only, for 5.5 HP gas engines 2” Cast iron pump with pedestal

222-POI 225-POI 222-PBI

Price

$1,075.00 V $432.00 V $433.00 V $617.00 V

NOTE: Pump/motors non-UPS-able. 100 # shipping weight

Replacement/Repair Parts – See Page 161

Banjo 333 & 444 Series 3” & 4” Cast Iron Centrifugal Pumps

More gallons per minute – higher pressure! n Maximum engine protection. n Pump end separated from engine. n Heavy duty slinger seal on motor shaft. n Large weep holes between pump end and engine. n “V” shaped for quicker priming. n Graphite loaded silicon carbide seal. n Dynamically balanced impeller. n Replaceable inlet and outlet flanges

Hydraulic Drives Available

Part # 444PI-18

Description 4” Cast iron pump with 18 HP Kohler engine 16713 Seal Kit - 3” 18435 Seal Kit - 4” 444-PBI 4” Pedestal pump 333-PBI 3” Pedestal pump 333PI-13H 3” Pump w/ 13HP Honda elec. start

Price $4,835.00 W $506.79 H $589.49 H $1,802.00 W $1,802.00 W $2,350.00 K

Replacement/Repair Parts – See Page 162 36

www.horvick.com

Banjo Gas-Driven Transfer Pumps Banjo 2” Poly Centrifugal Pump

Banjo’s polypropylene centrifugal pumps are molded from a special, glass-reinforced polypropylene for strength and toughness. The rubber Engine

200P-6 200P-5GC 200P-5H 200P-6EC

B&S Honda Honda Economy

6.5 5 5.5 6.5

205-PO

Wet Seal Pump Can Run DRY!”

In (in.) 2 2 2 2

Out (in.) 2 2 2 2

2” pump only

parts are made of EPDM compound, but can be ordered with Buna N or Viton rubber parts if the application requires them. Price $359.00 $490.00 $620.00 $309.00

K K K K

Seal Kit #

Price

RS601ESS RS601ESS RS601ESS RS601ESS

$21.00 $21.00 $21.00 $21.00

H H H H

$211.00 V

Wet Seal Pump Part # Description 200P-5H-W 2” poly wet seal pump, 5.5HP honda

Attachment

Price $825.00 K

Replacement/Repair Parts – See Page 163

Banjo 3” Poly Centrifugal

Banjo’s polypropylene centrifugal pumps are molded from a special, glass-reinforced polypropylene for strength and toughness. The rubber parts are made of EPDM compound,

but can be ordered with Buna N or Viton rubber parts if the application requires them.

In Out Price Seal Kit # Price (in.) (in.) 300P-6H Honda 6.5 3 3 $750.00 K 300P-11 B&S 11 3 3 $1,095.00 K 300-PO 3“ pump only $343.00 V Wet Seal Pump Part # Description Attachment Price $1,281.00 K 300P-6H-W 3” poly wet seal pump, 6.5 HP honda Part #

Engine

Wet Seal Pump Can Run Replacement/Repair Parts – See Page 164 DRY!”

1-800-373-4084

Pumps & Meters

Part #

Wet Seal Pumps Banjo 2” & 3” Wet Seal Cast Iron Pumps

Pumps & Meters Pumps & Meters

n Cast Iron Construction n Rugged n Dependable n 3/4” Shaft n Stainless Steel Shaft Sleeve

n Carbon Ceramic Seal w/ SS Sup & Spring n Replaceable Inlet and Outlet n Dynamically Balanced Impeller

Gas Driven Manifold Pumps Part #

Description

Price

222PIW-6.5H 2” 220 series pump with 6.5 HP Honda 332PIW-13H 3” 300 series pump with 13 HP Honda

$1,248.00 K $2,364.00 K

Wet Seal Pump Can Run DRY!”

Electric Manifold Pumps

Wet Seal Pump Can Run DRY!”

Part #

Description

BCPW-5-1 BCPW-5-3 BCPW-10-1 BCPW-10-3

2” 2” 3” 3”

220 220 300 300

series series series series

Price pump pump pump pump

5 HP single phase motor 5 HP 3 phase motor 10 HP single phase motor 10 HP 3 phase motor

$1,953.00 $1,659.00 $3,162.00 $2,365.00

K K K K

Hydraulic Manifold Pumps

Part #

Description

222PIHY-W 332PIHY-W

2” 220 series pump hydraulic driven 3” 300 series pump hydraulic driven

Price $1,698.00 V $2,357.00 V

www.horvick.com

Gas-Driven Transfer Pumps Hypro Gas-Driven Models 1537 & 1540 Cast Iron Pumps

The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless steel pumps are ideal for use with Roundup® or other acid applications. Model 1540 is the same as model 1537, without the mounting base. Hypro Cast Iron Pump With 5.5 Honda Part # 1540 (less base)

$969.00 V

Part # 1537 (pictured)

$1,029.00 V

Part # 1538 (just the wet end)

nnMax. flow rate: 110 GPM (free flow) nnMax. pressure: 80 PSI nnMax. fluid temperature: 140°F

Other Attributes nnClose-coupled, gas engine-driven nn5.5 HP Honda gas engine nnHousing: cast iron nnPort sizes: 1 1⁄2” NPT inlet, 1 1⁄4” NPT outlet nnImpeller: glass-filled nylon nnPump seals: Viton/ceramic standard (Buna-N/ ceramic and Viton/silicon carbide available) nnWeight: 53 lbs./24.1 kg

Repair parts Part # 0152-9000C 0402-9200P 1700-0010 2120-0009 1720-0083

Description Price Pump casing $188.00 H Impeller $109.00 H Gasket (between impeller and seal) Mechanical seal $43.50 H Body o-ring $2.95 H

$550.00 H

WX10 1” Centrifugal Pump

Ace Gas-Driven Pump

Features & Benefits

Features

nnHonda Mini 4-Stroke 1.5 HP, 31 cc Engine nnWeighs only 15 lbs. nnSuction Hose, Strainer, Garden Hose Adapter Included nnWarranty 2-Yr Res. / 1-Yr Com.

nnBarske tall blade impleller design – higher pressures at standard engine speeds nn1” suction — 3/4” discharge nn65 PSI max. pressure and 24 GPM max. flow nnImpeller attached directly to 5/8” engine shaft nnCorrosion resistant Polypropylene

WX10 Specifications nnPorts, inlet/outlet: 1” NPT nnCentrifugal, Self-Priming Pump nn40 gals./min. nnMax. Pressure: 43 PSI nn13.0” x 9.8” x 12.8” Part # WX-10K1A

Repair parts Part # Description 78106-YE9-B01 Impeller 78130-YE9-B01 Seal 78112-YE9-003 End plate gasket

1-800-373-4084

$509.00 V

Part # GE-75-HONDA

$720.00 K

Price $14.00 W $49.80 W $6.85 W

Pumps & Meters

Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.

Performance Information

Lovejoy Couplers Honda Engines

Pumps & Meters Pumps & Meters

Hondas are the best engine on the market, and with good reason. They feature overhead valves, solid state ignition. An oil alert feature shuts the engine off automatically if the oil level drops too low. For work under dusty conditions, cyclone air cleaners are recommended.

Honda replacement air filters Motor Part # (HP) Description Price HF3-ZE0 3.5 & 4 standard $11.00 W HF5-ZE1* 5.5-6.5 standard $11.00 W HF8-ZE2 8 standard $12.00 W HFC8-ZE3 8/11/13 cyclone $17.00 W

Features nnSolid-state ignition nnAutomatic oil alert nnLess vibration nnOn-off switch nnThrottle nnBayonet oil dip stick

Shaft Part # HP Dia. (in.) Type GX120QX 4 3/4 keyed GX160HX 5.5 3/4 keyed GX160QX 5.5 3/4 keyed GX160TX 5.5 5/8 threaded GX200QX 6.5 3/4 keyed GX240QA 8 1 keyed GX240QAE 8 1 keyed GX240QXC 8 1 keyed GX390QAE 13 1 keyed GX610K1QZE 18 1 keyed

Features* standard 6:1 gear reduction standard standard standard standard electric start cyclone air cleaner electric start V-twin

Price Net $427.00 W $639.00 W $395.00 W $425.00 W $409.00 W $665.00 W $830.00 W $725.00 W $965.00 W Call for Price

* Max 3600 RPM

* Also fits 4C/5.5C Cyclone

Lovejoy-style Couplers coupler

Keyed Shaft Couplers

spider

coupler Use two couplers with a spider (shown above) Three-piece assemblies used for externally coupling pumps to motors and other drive equipment. Choose the two cast iron coupling bodies according to the desired bore sizes, and one center spider. Hollow head set screws on all couplings.

Part # Body Bore Size Price Style (in.) 4X176 L050 1/2 $4.75 V 4X177 L050 5/8 $4.75 V 4X178 L070 1/2 $7.40 V 4X179 L070 5/8 $8.10 V 4X180 L070 3/4 $8.10 V 4X181 L075 1/2 $8.50 V 4X182 L075 5/8 $8.50 V 4X183 L075 3/4 $8.50 V 4X184 L075 7/8 $8.50 V 4X185 L090 1/2 $13.05 V 4X186 L090 5/8 $13.05 V 4X187 L090 3/4 $13.05 V 4X188 L090 7/8 $13.05 V

4X193 L095 1 $20.00 6X073 L095 1-1/8 $20.00 6X074 L100 3/4 $37.50 6X076 L100 1 $37.50 4X194 L100 1-1/8 $37.50 4X195 L100 1-1/4 $37.50 4X196 L100 1-3/8 $37.50 6X075 L100 7/8 $37.50

V V V V V V V V

*All shafts are keyed except for the half inch L050, L070, L075, and L090, which are solid shafts.

Buna-N Spiders

Size required for horsepower

Spiders install in the center of coupling bodies and are made of oil-resistant, highly resilient, longlife material. Operating temperature range is -40째 to 212째F. Part # Body Style 1X409 L050 1X408 L070 2X814 L075 1X407 L090/L095 1X406 L100

Part # Body Bore Size Price Style (in.) 6X071 L095 1/2 $20.00 V 6X072 L095 5/8 $20.00 V 4X191 L095 3/4 $20.00 V 4X192 L095 7/8 $20.00 V ML095-1516 L095 15/16 $20.00 V

Price $3.09 V $3.90 V $7.50 V $9.70 V $20.50 V

Style Torque (lbs.) L050 26.30 L070 43.20 L075 0.90 L090 144.00 L095 194.00 L100 417.00

Horsepower Cap. at varying RPM 300 1200 1800 3600 0.13 0.50 0.75 1.50 0.21 0.84 1.20 2.47 0.42 1.68 2.50 5.00 0.66 2.76 4.00 8.00 0.90 3.60 5.40 10.80 2.00 8.00 11.90 23.80

www.horvick.com

Pedestal Pumps & Electric Pumps Positive Displacement Rotary Gear

200-PBI 2” cast iron

The Banjo cast iron and poly pedestal pumps may be attached to electric or gas motors to transfer liquids.

Shaft Dia. (in.)

GPM@ 1725 RPM

HP @ 40 PSI

BB2 BB3 BB4 BB5 BB6

1/4 3/8 1/2 3/4 1

1/2 5/8 5/8 5/8 5/8

3.8 7.0 11.3 19.9 24.0

1/2 3/4 3/4 1-1/2 1-1/2

More Pumps... “Hypro Pedestal Pumps” On Page 45

Pedestal Pumps

205-PB 2” poly

Port Size (in.)

222-PBI 2” cast iron Part # 205-PB 200-PBI 222-PBI 300-PBI 300-PB

300-PBI 3” cast iron

1-800-373-4084

Wet Seal Pump Can run DRY!”

$614.75 $668.00 $682.75 $731.25 $767.00

H H H H H

301-POI-W 3” cast iron

Description Attachment Price 2” poly pedestal pump pedestal $374.00 V 2” pedestal pump, cast iron, pedestal $589.00 V 2” pedestal pump, cast iron, pedestal $617.00 V 3” pedestal pump, cast iron, pedestal $1,155.00 V 3” pedestal pump, poly, pedestal $599.00 V

Wet Seal Bearing Pedestal Pump Part # Description 200-PO-W 2” poly 300-PO-W 3” poly 200-PBI-W 2” cast iron 301-POI-W 3” cast iron

Price

Seal Kit # Price RS601ESS $21.00 H RS245V $53.00 H 15999V $109.67 H RS11558V $85.00 H RS601VSS $39.00 H

Attachment 3/4” shaft 3/4” shaft 3/4” shaft 3/4” shaft

Price $455.00 V $729.00 K $931.00 V $1,795.00 V

Pumps & Meters

A chemical pump for use with nonflammable liquids compatible with the pump’s component materials. The rotary gear is bronze. Pump to be operated with a maximum pressure of 100 PSI and maximum RPM of 1725. Horsepower is rated at 40 PSI and a maximum RPM of 1725.

Part #

Electric Pumps Shurflo 2088 Series Diaphragm Pump The One To Grow With.

Pumps & Meters Pumps & Meters

The high performance ShurFlo 2088 Series represents over twenty successful years of electric pump development, from the patented three chamber pump-head to its heavy duty motor and bearings. Count on the 2088 and the complete line of ShurFlo pumps for long life, unmatched reliability and trouble-free performance.

Specifications n Automatic demand. 0-50 PSI models w/ adjustable switch feature n Long life design n Serviceable-field repairable. Replacement parts available n Smooth, quiet operation n Built-in check valve rated up to 200 PSI n Positive displacement 3 chamber diaphragm pump design n Continuous duty cycle n Voltage—12v, 115 vac n 170° F (82° C) Max. Liquid Temperature n Self priming up to 12’ n Ports—1/2” NPT M threaded

Ref/Part # 2088-343-135 2088-313-145 2088-514-144 2088-394-154 2088-594-500

Description 12 vdc, 50 PSI turn-off, 3 GPM 12 vdc, 3.6 GPM, 45 PSI (cont. duty motor) 12 vdc, 4 GPM, 45 PSI 110 vac, 3.2 GPM, 45 PSI shut off 115 vac, 3.3 GPM

Price $134.00 V $217.00 V $183.00 V $194.00 V $173.00 V

Swivel Adapters for Shurflo 2088 Series Part # 234-2916 234-3916 234-2926 234-3926 234-2946 234-3946 244-3366

Description 1/2”F x 3/8” barb straight 1/2”F x 3/8” barb elbow 1/2”F x 1/2” barb straight 1/2”F x 1/2” barb elbow 1/2”F x 3/4” barb straight 1/2”F x 3/4” barb elbow 1/2”F x 1/2” male elbow

Price $1.20 H $1.20 H $1.20 H $1.20 H $1.20 H $1.20 H $3.30 H

Replacement/Repair Parts – See Page 165

ShurFlo 8000 Series Diaphragm Pump The One To Grow With.

Specifications n Automatic demand. 0-100 PSI models with adjustable switch feature n Long life design n Serviceable-field repairable. Replacement parts available n Built-in check valve rated to 125 PSI n Smooth, quiet operation Part # 8000-543-236 8000-543-250 8000-543-290 8000-033-236 8000-933-250 8007-543-850 8000-533-236

Description

GPM Price (max.) 12 vdc, 40-60 PSI, switch 1.8 $107.00 V 12 vdc, 45-lb internal bypass 1.8 $107.00 V 12 vdc, 1/4” front mount port 1.8 $112.00 V 115 vac, 60#, viton, switch 1.0 $205.00 V 110 vac, internal bypass-EPDM 1.4 $142.00 V 12 vdc, built-in on/off switch 1.8 $115.00 V 110 vac, 60# 1.4 $167.00 V

n Bypass models available n Positive displacement 3 chamber diaphragm pump design n Continuous duty cycle n Voltage—12DC & 115AC n 180° F (82° C) Max. liquid temperature n Self priming up to 8’ n Ports—3/8” NPT F

Replacement/Repair Parts – See Page 165

www.horvick.com

Electric Pumps Fatboy 12-Volt Pump Specifications

Part # 7870-101E-SB

$259.00 V

5500 Series Super Flow Pump

12-Volt Speed Controls

Features

nnOperates on 12 V DC nn25 Amp Mini Fuse nn0-60 lb. Standard Gauge with 1/4” pipe thread nnReverse polarity protection nnAdjustment knob friction controlled for stability nnPower indicator light nnConvenient on/off switch

nn5 chamber construction nnClosed impervious diaphragm nnIndependent symmetrical valves nnUp to 5.0 GPM nnMax. 100 PSI nnCan run dry without damage

(for FloJet, Aquatec & Shurflo Pumps)

American Made Part #5850-101E

$149.00 V

Delavan 550 Series Repair parts Part # 5500-CPH 5500-MTR 5500-UH 5500-VH 5500-LH

Description Complete Pump Head Replacement Motor Upper Housing Valve Housing Lower Housing

1-800-373-4084

Price $106.00 V $79.00 V $35.00 V $33.00 V $46.00 V

12V Speed Control Part # 3BEC30-NG-2

$239.00 V

Pumps & Meters

American Made

nn7 GPM nnMotor Type: 12 VDC permanent magnet, totally enclosed, non-ventilated nnMotor is not equipped with thermal protection. For user safety, optimal performance, and maximum motor life, the motor surface temperature should not exceed 180°F (82°C). nnValves: Viton nnDiaphragm: Santoprene nnPump Type: 5 chamber positive displacement diaphragm pump, self priming, capable of being run dry, demand or bypass mode nnLiquid Temperature: 140°F (60°C) Max. nnMax Pressure: 150 PSI (10 bar) nnInlet/Outlet Ports: 7870: 1⁄2” FPT

Cast Iron Pumps Banjo Hydraulic Motor Driven Pumps

Pumps & Meters Pumps & Meters

Self Priming

Features: nnStainless steel shaft sleeve to protect engine shaft. nnReplaceable inlet and outlet flanges. nnDynamic balanced impeller. Part # 200CI-HYD 300CI-HYD HY-1013 HY-1012 200-PHY 300-PHY

Hydraulic Motor

nnCarbon ceramic seal with stainless steel housing and viton® rubber parts. nnAvailable in 1-1/2”, 2”, 3” sizes.

nnHydraulic fluid capacity (minimum) 8-gallon/maximum 15-gallon nn21 HP nnOpen or closed system (3600 RPM)

Description Inlet & Outlet Complete pump with hydraulic motor 2” x 2” Complete pump with hydraulic motor 3” x 3” Hydraulic motor only 1.5”– 2” Hydraulic motor only 3” 2” poly pump with hydraulic motor 3” poly pump with hydraulic motor

Price $1,533.00 V $3,112.00 V $810.00 V $929.00 V $1,055.00 V $1,162.00 V

Banjo BCP Series Pump/ Motor Combinations Banjo’s cast iron, selfpriming centrifugal pumps can be used for transfer of fertilizer, chemical, and water. Available in 1-1/2”, 2”, and 3” sizes.

These pumps feature a stainless steel shaft sleeve, a carbon ceramic seal with stainless steel housing and viton parts, replaceable inlet and outlet flanges, and a balanced impeller.

Banjo BCP 333 Series Cast Iron Pump / Elect. Motor O

3” cast iron pump w/15 HP three phase electric motor Part # 333PIE15

$4,173.00 V

BCP-1-2 2 1 BCP-1-3 2 3 BCP-2 3 3 BCP-3-1 3 1 BCP-4 3 1 BCP-5 5 3 BCP-5-1 5 1 BCP-5-P 5 3 2 BCP-7.5-1 7.5 1 BCP-7.5 7.5 3 BCP-10 10 3

nnDurable cast iron construction. nnDynamically balanced impeller. nnReplaceable inlet and outlet flanges. nn Graphite loaded silicon carbide seal with stainless steel cup and spring with FKM (viton type) rubber. nnPump end separated from engine. nnLarge weep holes between pump end and engine. nn“V” Shaped for quicker priming.

2 2 2 2 2 2 2 (poly) 3 3 3

1740 1740 3450 3450 3450 3450 3450 3450 3450 3450 3450

Price

NO $989.00 NO $967.00 NO $875.00 NO $922.00 YES $1,465.00 YES $1,415.00 YES $1,630.00 YES $1,239.00 YES $2,655.00 YES $2,315.00 YES $2,480.00

V V V V V V V V V V V

Banjo BCP 222 Series Cast Iron Pumps

Features

Part # HP Phase Ports RPM Base (in.) (max.)

Features

nnCast iron construction with Stainless steel shaft. nnCarbon ceramic seal with stainless steel cup and spring with FKM (viton type) rubber. nn“V” shaped for quicker priming.

2” Cast Iron Pump w/5.0 HP Three Phase Electric Motor 222PIE5......................... $1,774.00

2” Cast Iron Pump w/5.0 HP Single Phase Electric Motor 222PIE51....................... $2,162.00

www.horvick.com

Centrifugal Pumps Hypro Series 9200 Cast Iron, Pedestal & Flange Mount

9203P poly

Max GPM

Max PSI

Max RPM

9202C (pictured) 9203C*

105

180

6000

136

180

6000

9203C-R*

136

180

6000

9206C*

225

4200

RS200V 9205C

190

4200

RS201V 9203P-S (pictured)

4200

9500P-S

3600

Description

List Price

Pedestal mount, cast iron pump with 5/8” solid S.S. shaft $479.00 and Viton shaft seal. 1-1/4” inlet; 1” outlet NPT ports. Pedestal mount, cast iton pump with 5/8” solid shaft $485.00 and Viton shaft seal. 1-1/2” inlet; 1-1/4” outlet NPT ports. Pedestal mount, clockwise rotation cast iron pump, with $497.00 5/8” solid shaft, Viton seal and 1-1/2” x 1-1/4” NPT ports. Pedestal mount, cast iron pump with 7/8” solid shaft $561.00 and Viton shaft seal. 2” inlet; 1-1/2” outlet NPT ports. Seal Kit – 9202/9203/9204 $29.00 Pedestal mount, cast iron pump with 7/8” solid keyed $1,219.00 shaft, Viton seal, and 2” inlet x 1-1/2” outlet NPT ports. Seal Kit – 9205 $29.00 Pedestal mount pump—direct drive with an elect. motor $593.00 OR belt & pulley drive—electric motor or gas engine, 7/8” solid keyed 316 stainless steel shaft. $642.00 Clockwise rotation pedestal mounted pump designed for direct drive with a gas engine or electric motor, 7/8” solid keyed 316 stainless steel shaft.

H H H H H H H H

*OPTIONS Stainless Steel Housings available on models 9202, 9203, 9206 Flanged Housing available on models 9203 and 9206

Hypro Series 9200 Clutch Driven Models with 12 Volt Clutches

9202C-CL

Model Number

Max GPM

Max PSI

Max RPM

9202C-CL (pictured) 9203C-CL

6000

140

160

6000

9203C-R-CL

140

160

6000

RS200V Electric Clutches ELCL ELCL-HD

Description

List Price

12v magnetic clutch, cast iron pump with 5/8” solid shaft, 1-1/4” inlet, 1” outlet NPT ports. 12v magnetic clutch, cast iron pump with 5/8” solid shaft, 1 1/2” inlet, 1 1/4” outlet” 12v magnetic clutch, clockwise-rotation cast iron pump with 5/8” solid shaft, 1 1/2” inlet, 1 1/4” outlet Seal kit

$943.00 V

Replacement clutch, standard duty Replacement clutch, heavy duty

$459.00 V $663.00 V

$948.00 V $958.00 V

$29.00 H

Replacement/Repair Parts – See Page 164

Hypro Series 9300 Hydraulic-Motor-Driven Models Cast Max. Max. GPM PSI 9303C-HM1C 114 180 Used in 93-94 RoGator

Model

Cast

CALL for Hydraulics Setup

9303C-HM2C 82

180

9303C-HM3C 106

180

9303C-HM4C 95

180

9306C-HM1C 207

130

9306C-HM3C 214

135

9306C-HM5C 212 140 Used in 95+ RoGator

Description 10 GPM hydraulic motor/cast iron pump for open center systems, ports (NPT): 1-1/2” inlet, 1-1/4” outlet. 5 GPM hydraulic motor/cast iron pump for closed center systems, ports (NPT): 1-1/2” inlet, 1-1/4” outlet. 20 GPM hydraulic motor/cast iron pump, Large open center systems, ports (NPT): 1-1/2” inlet, 1-1/4” outlet. 7 GPM hydraulic motor/cast iron pump, closed/open center systems, ports (NPT): 1-1/2” inlet, 1-1/4” outlet. 13 GPM hydraulic motor/cast iron pump, closed/open center systems, ports (NPT): 2” inlet, 1-1/2” outlet. 24 GPM hydraulic motor/cast iron pump, large open center systems, ports (NPT): 2” inlet, 1-1/2” outlet 17 GPM hydraulic motor/cast iron pump, closed/open center systems, ports (NPT): 2” inlet, 1-1/2” outlet

List Price $1,066.00 H $1,066.00 H $1,133.00 H $1,066.00 H $1,248.00 H $1,316.00 H $1,248.00 H

*Flange Inlet Available

Replacement/Repair Parts – See Page 166

1-800-373-4084

Pumps & Meters

9202C cast

Model Number

Diaphragm & Piston Pumps

Pumps & Meters Pumps & Meters

Hypro Diaphragm Pumps Heavy-Duty, Positive Displacement Pumps with a Wide Range of Flows and Pressures for a Variety of Spraying Applications.

This is the most complete line of diaphragm pumps available! Hypro’s selection offers a variety of flows for spraying or pumping herbicides, pesticides, and liquid fertilizers.

Gear Reduction Kits Model # KIT1640 KIT1642

Description Price For Model 9910-D30 pumps $689.00 H 6:1 gear box for standard 5 HP gas engine with 3/4” shaft. For Model 9910-D50 pumps $861.00 H 6:1 gear box for standard 8-18 HP gas engine with 1” shaft.

Description

List Price

Medium Pressure Pumps Model Max. Max. Max. Number GPM PSI RPM 9910-D252 6.1 363 650 9910-D30 9.5 550 600 9910-D30AP-A 9910-D30-GRGI 9.5 550 600 9910-D30-B-GRGI 9910-D50 14.0 550 600 9910-D50AP-A 9910-D503 14.0 550 600 9910-D503GRGI 14.0 550 600

2 - diaphragm pump - 3/4” HB inlet, 1/2” HB, 3/4” shaft 2 - diaphragm pump - 1” HB inlet, 1/2” HB outlet. D30AP-A - 3/4” solid extended shaft. Select shaft kit or gear reduction. 2 - diaphragm pump - with GS40GI control unit & gear reduction - fits 5 HP gas engine B version with Buna-N diaphragms. 2 - diaphragm pump - 1-1/4” HB inlet, 1/2” HB outlet. D50AP-A -1” solid extended shaft. Select shaft kit or gear reduction. 3 - diaphragm pump - 1-1/4” HB inlet, 3/4” NPT outlet. Select shaft kit or gearbox. 3 - diaphragm pump - assembled with gearbox 9910-KIT 1642 and control 9910-RM40 for mounting on 8 HP gas engines.

$843.00 H $1,054.00 H $1,125.00 H $1,891.00 H $1,891.00 H $1,493.00 H $1,564.00 H $1,493.00 H $2,533.00 H

Low Pressure Pumps Model Max. Max. Max. Number GPM PSI RPM 9910-D70 19 290 550 9910-D115 30.1 290 550 9910-D135 34.8 290 550 9910-D160 42.5 290 550 9910-D250 66 290 550

Description

List Price

2 - diaphragm pump - 1-1/4” HB inlet, 1” HB outlet. Select shaft kit for desired drive. 3 - diaphragm pump - 1-1/2” HB intlet, 1” HB outlet. Select shaft kit for desired drive. 3 - diaphragm pump - 1-1/2” HB inlet,1” HB outlet. 1-3/8”-6B splined shaft. 4 - diaphragm pump - 2” HB inlet, 1-1/2” HB outlet. 1-3/8”-6B male spline thru shaft. 6 - diaphragm pump - 2” HB inlet, 1-1/2” HB outlet. 1-3/8”-6B male spline thru shaft.

$1,170.00 H $1,756.00 H $1,894.00 H $3,113.00 H $3,922.00 H

Hypro Piston Pump This Hypro piston pump has a 1/2” inlet and 1/2” outlet

and a 5/8” shaft. The maximum fluid temperature is 140° F. Shaft rotation can be clockwise or counterclockwise. Motor sold separately. GPM PSI Part # RPM (max.) (max.) Price Kit # Price 5321C 1800 2.2 1000 $492.00 H 3430-0144 $43.00 H 5321C-H 1800 2.2 1000 $492.00 H 3430-0144 $43.00 H 5320C-RX 1800 2 500 $458.00 H 3430-0009 $18.00 H 5320C-HRX 1800 2 500 $458.00 H 3430-0009 $18.00 H 5330C-RX 1800 3 500 $458.00 H 3430-0009 $18.00 H 5330C-HRX 1800 3 500 $458.00 H 3430-0009 $18.00 H

KEY: H: hollow shaft

C: solid shaft

R: rubber caps

www.horvick.com

Roller Pumps Roller Pumps

6500 Series

7500 Series

7700 Series

Model # Max Max Max Description GPM PSI RPM Price 1502C 62.0 150 1000 Cast iron 6-roller pump with Super Rollers, Buna-N $639.00 H seals, 1-1/2” NPT ports, and 15/16” solid shaft 1502N 62.0 150 1000 Ni-Resist 6-roller pump with Super Rollers, Buna-n $1,057.00 H seals, 1-1/2” NPT ports, and 15/16” solid shaft 1502XL 62.0 150 1000 SilverCast 6-roller pump with Super Rollers, $1,458.00 H Viton seals, 1-1/2” NPT ports, and 15/16” solid shaft 1700C 45.0 200 1000 Cast iron 5-roller pump with Super Rollers, Viton $415.00 H seals, 1” NPT ports, and 15/16” solid shaft 1700N 45.0 200 1000 Ni-Resist 5-roller pump with Super Rollers, Viton $860.00 H seals, 1” NPT ports, and 15/16” solid shaft 1700XL 45.0 200 1000 SilverCast 5-roller pump with Super Rollers, Viton $1,163.00 H seals, 1” NPT ports, and 15/16” solid shaft 6500C 22.0 300 1200 Cast iron 6-roller pump with Super Rollers, Viton $201.00 H seals, 3/4” NPT ports, and 5/8” solid shaft 6500N 22.0 300 1000 Ni-Resist 6-roller pump with Super Rollers, Viton $457.00 H seals, 3/4” NPT ports, and 5/8” solid shaft 6500XL 22.0 300 1000 SilverCast 6-roller pump with Super Rollers, Viton $643.00 H seals, 3/4” NPT ports, and 5/8” solid shaft 7560C 22.0 300 1000 Cast iron 8-roller pump with Super Rollers, Viton $264.00 H seals, 3/4” NPT ports, and 15/16” solid shaft 7560N 22.0 300 1000 Ni-Resist 8-roller pump with Super Rollers, Viton $522.00 H seals, 3/4” NPT ports, and 15/16” solid shaft 7560XL 22.0 300 1000 SilverCast 8-roller pump with Supper Rollers, Viton $766.00 H seals, 3/4” NPT ports, and 15/16” solid shaft 7700C 22.4 200 800 Cast iron 7-roller pump with Super Rollers, Viton $269.00 H seals, 3/4” NPT ports, and 15/16” solid shaft 7700N 22.4 200 800 Ni-Resist 7-roller pump with Super Rollers, Viton $522.00 H seals, 3/4” NPT ports, and 15/16” solid shaft 7700XL 22.4 200 800 SilverCast 7-roller pump with Super Rollers, Viton $785.00 H seals, 3/4” NPT ports, and 15/16” solid shaft

Replacement/Repair Parts – See Page 48

Hypro Series 4001 & 4101 Roller Pumps

4001 Series

4101 Series

Model # Max Max Max GPM PSI RPM Description Price 4001C 9.0 150 1800 Cast iron 4-roller pump with Super Rollers, Viton $199.00 H seals, 3/4” NPT ports, 5/8” solid shaft. 4001N 9.0 150 1800 Ni-Resist 4-roller pump with Super Rollers, Viton $345.00 H seals, 3/4” NPT ports, 5/8” solid shaft 4001N-EH 10.4 30 1800 12 volt DC motor-driven, Ni-Resist, 4-roller pump with $745.00 H Super Rollers, Viton seals, 3/4” prots, 1/2” hollow shaft 4001XL 9.0 150 1800 SilverCast 4-roller pump with Super Rollers, Viton $511.00 H seals, 3/4” NPT ports, 5/8” soled shaft 4101C 7.0 150 2600 Cast iron 4-roller pump with Super Rollers, Viton $186.00 H seals, 3/4” NPT ports, 5/8” solid shaft 4101N 7.0 150 2600 Ni-Resist 4-roller pump with Super Rollers, Viton $333.00 H seals, 3/4” NPT ports, 5/8” solid shaft 4101N-EH 7.5 50 2600 12 volt DC motor-driven, Ni-Resist, 4-roller pump with $734.00 H Super Rollers, Viton seals, 3/4” ports, 1/2” hollow shaft 4101N-H 7.0 150 2600 4101N pump with 5/8” hollow shaft adaptor $349.00 H 1320-0016 installed 4101XL 7.0 150 2600 SilverCast 4-roller pump with Super Rollers, Viton $498.00 H seals, 3/4” NPT ports, 5/8” solid shaft

1-800-373-4084

Pumps & Meters

Positive displacement, Cast iron, NI-resist and Silvercast pumps for most ag chemical spraying and other fluid transfer applications

Note: Use of RoundUp in cast iron pumps will void warranty.

Roller Pumps Parts Parts for Hypro Roller Pumps body

rotor

PTO adapter

end plate

include Repair kits r gaskets ollers, seals, an . Order d separate bearings ly.

roller

shaft

ball bearing

Part Series #

seal

Repair Kit Rollers Viton Seals O-ring Gaskets Ball Bearings # of Part # Price Part # Price Part # Price Part # Price Part # Price Rollers (ea.) (ea.) (ea.) (ea.) (ea.)

1500 6 3430-0386 $74.00 1700 5 3430-0437 $66.00 4001/4101 4 3430-0390 $32.75 6500 6 3430-0380 $38.50 7560 8 3430-0381 $55.75 7700 7 3430-0384 $52.25

H H H H H H

1005-0005 $7.30 1005-0005 $7.30 1005-0002 $3.50 1005-0004 $3.30 1005-0004 $3.30 1005-0004 $3.30

H H H H H H

2112-0003 $14.75 H 2112-0003 $14.75 H 2107-0002 $9.45 H 2107-0002 $9.45 H 2112-0003 $14.75 H 2112-0003 $14.75 H

1720-0003 $2.65 1720-0099 $1.85 1720-0104 $0.85 1720-0008 $1.35 1720-0014 $2.00 1720-0014 $2.00

H H H H H H

2008-0001 $13.50 2008-0001 $13.50 2000-0010 $9.05 2000-0010 $9.05 2008-0001 $13.50 2008-0001 $13.50

H H H H H H

1321-0006

1320-0061

1321-0012

1323-0076

PTO Couplers These heavy duty, cast PTO couplers attach roller pumps quickly and securely to PTO shafts. For use with 540 RPM and 1000 RPM PTOs. PTO Shaft RPM (in.) Dia. (in.)

Forged Steel

Standard

Quick Disconnect

1320-0022

Pumps & Meters Pumps & Meters

port

1 1 1 1 1 1 1 1 1 1 1 1 1

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/4

5/8 15/16 5/8 15/16 15/16 5/8 5/8 15/16 5/8 15/16 15/16 5/8 15/16

540 540 1000 1000 multi multi 540 540 1000 1000 multi multi 1000

Hypro Part # 1321-0006 1321-0007 1321-0008 1321-0009 1321-0013 1321-0012 1320-0022 1320-0033 1320-0053 1320-0038 1323-0076 1323-0077 1320-0080

Price

$43.75 $47.50 $53.25 $52.00 $45.50 $43.00 $22.00 $32.25 $33.25 $42.50 $55.50 $55.50 $70.50

H H H H H H H H H H H H H

www.horvick.com

Ground-Drive Pumps CDS-John Blue Ground Drive Pumps

Features

n Single Valve Cap – One piece valve cap allows for easy check valve access without removing the hoses. n Outboard Cylinder – Plunger packing can be inspected or replaced without removing the Ground Drive Pump Models:hoses. Part # Max Flow Max PSI Desc Price n NGP-6055 NGP-7055 NGP-8055 NGP-9055

21.0 34.2 42.0 68.4

GPM GPM GPM GPM

120 120 120 120

PSI PSI PSI PSI

Single Piston Single Piston Double Piston Double Piston

$1,873.32V $2,194.37V $2,965.75V $3,299.24V

Part #

GPM max max inlet outlet shaft Price PSI RPM shaft LM-1255 12.5 120 550 1” 1” No clutch $1,974.03 V

n Main Shaft Seals – The main shaft seals incorporate a dual wiper that is enclosed in a grease cavity to flush out contamination, resulting in a longer life. n Check Valve Design – A positive check O-ring seal offers enhanced priming and is more forgiving in handling debris, which ensures accuracy. n Universal Piston Rod Seals – Three Stage Dynamic Design – Primary wet end “V” packing, primary crankcase “V” packing and secondary crankcase O-ring seals work in unison to offer multiple stage protection between the wet end and crankcase. This reduces pump weepage while maximizing pump life. n Standard Main Shafts – Standard single and double piston pump crankshafts are universal in the NGP line for modular upgrades such as clutches and ON-THE-GO variable rate.

CDS-John Blue Ground Drives (DRV) & Pump Drives Metering Fertilizer and Chemical Applications Made Simple n High and low application rates n Push or pull n Fits all current CDS-John Blue Pumps n Fits 7” x 7”, 6” x 6”, 6” x 4” and 4” x 4” bars n Adjustable to fit your bar height n Bottom of bar to ground using 13.5” loaded radius tire: Minimum 17”, Maximum 31” n Wide pivot angle

DRV-3200

Ground Drive with pump mount— Fixed height adjustment mechanism (10 positions)

DRV-3300

Ground Drive with pump mount— Spring loaded adjustment mechanism. NOTE: Less Tire.

Demco Lil’ Thumper Piston Pump The Lil’ Thumper pump by Demco features an injection molded case made of durable DuPont Rynite to resist corrosion from ag chemicals and clear liquid fertilizers. An eccentric drive system allows for easy adjustment of your application rate. Description Manual Shut-off 1.25” Dia. Solid Shaft Only

Pumps are available with a manual, electric, or hydraulic shut off. Maximum RPM is 275, and the output at 100 RPM is 7.35 GPM for the single piston model and 14.7 GPM for the double piston model.

Single Piston Pump Part # Price PP1 $1,530.00 K 5232 $1,389.00 K

Double Piston Pump Part # Price PP2 $2,228.00 K 5233 $2,117.00 K

Maximum pressure rating: 100 PSI

Replacement/Repair Parts – See Page 168

1-800-373-4084

Pumps & Meters

n Common or Independent Manifolds – The larger capacity double piston NGP pumps come standard with a common inlet and outlet manifold. The manifold can be removed for independent pumping chambers allowing dual flow divider usage or half width applications. n New double piston planter pump – NGP-8055 offers 42.0 GPM for 24 row planters. n Variable Rate Ready – The modular design means your NGP is Variable Rate ready when you’re ready – today or tomorrow.

Chemical Pumps Sotera Series 400 Diaphragm Pump

Pumps & Meters Pumps & Meters

for Ag Chemical Fluid Transfer The Series 400 diaphragm pump transfers all types of materials from clear, thin flowables to thick viscosity encapsulated products and suspensions. The 400 is a double action diaphragm pump, using a patented, spring driven, positive displacement mechanism. The flow rate at 12vdc with low viscosity is up to 13 GPM and 110vac with low viscosity up to 16 GPM. Part # FR-415B FR-420B F6863 FR-460B F6863 G9734

Formerly Fillrite

Chemtraveller

nn12vdc (110) available nnUp to 13 GPM nnDouble diaphragm for smooth flow nnSpring driven diaphragm for continuously variable displacement nnPumps 1 to 3000 cps fluids without motor overloading

Description Base Pump – 12v Pump, Hose, Nozzle, Drop Tube Pump Repair Kit Complete Assembly – 110v Pump Pump Repair Kit 12V Replacement Motor

Specifications:

A safe, dependable self-contained system for handling farm chemicals

Specifications:

nnPump Unit: Series 400 12vdc positive displacement, dual diaphragm design. Flow rate up to 13 GPM. Fluid viscosities from .8 to 1000 cps. nnDigital Meter: Series 825 with LCD display. Flow range 2 to 20 GPM. Accurate to +/- 0.5% at point of Part # FR-435B FR-825 F6863 FR-465X713

Price $632.10 $727.65 $225.00 $727.65 $225.00 $410.74

W W C W C C

calibration for field conditions. Operates on two AA replaceable batteries. nnHose: 1” x 14’ discharge and 1” x 9’ suction, EPDM nnNozzle: 1” polypropylene ball valve with spout, EPDM seals nnFittings: Polypropylene

Description Complete Assembly 12 v Pump Digital Flowmeter Pump Repair Kit 110v pump

Price $1,174.95 W $208.95 W $225.00 C $1,085.70 W

Hypro Bulk Chemical Pump SF-1100 Series

Specifications: nnSpecialized EPDM elastics or Viton option nn12 volt DC or 110 volt AC motor option nn20 foot cord with alligator clips and in-line fuse (DC only)

Designed for efficiency and power to handle highly viscous fluids. Servicing the SF-1100 series pump is a rare event, but if needed, it can be serviced quickly and easily with only a few hand tools.

Part # SF-1100 SF-1100-110V SF-1105

nnWeather protected on/off switch nnInternal bypass to protect the pump at shut-off nn2” MNPT inlet, 1” FNPT outlet nnCapable of priming up to 12 feet

Description 10 GPM Pump, EPDM Valve — 12 VDC 10 GPM Pump, EPDM Valve — 110 VAC 10 GPM Pump, Viton® Valve — 12 VDC

Price $759.00 H $770.00 H $777.00 H

www.horvick.com

Herbicide Pumps GPI Cast Aluminum Herbicide Pumps 12 V DC & 110 V AC NOT recommended for ROUNDUP

Cast Aluminum Pumps feature:

M1100 H Pump – 110 volt model n Current draw less than 2 amps, when used according to operating conditions. 12vdc Part # M120H

110vdc Part # M1100H

$526.00 C Part # 119003-1 119008-1

$613.00 C

Description M120H Replacement Motor M1100H Replacement Motor

Price $192.26 C $242.00 C

M120H Pump – 12 volt model n Current draw less than 23 amps, when used according to operating conditions. n 20’ - 14 ga. power cord with 20 amp fuse & clips ready for 12vdc battery connection.

Orde Drop Tu r b & Nozzlees Separat s e Page 55ly

Call for quantity discounts!

GPI Molded Plastic Herbicide Pumps P-120H / P-200H Pump features include:

For Non-Viscous Fluids (0–10 centipose viscosity) delivers up to 12 GPM at the nozzle Part # P120H

$608.00 C

For Viscous Fluids (10–450 centipoise viscosity) delivers up to 8 GPM at the nozzle Part # P200H

n Lightweight, durable, molded plastic housing for chemical corrosion resistance. n P-120H maximum operating pressure of 7 PSI. P-200H maximum operating pressure of 10 PSI. n 12vdc motor with low amp draw of 15 to 25 amps under normal operating conditions. n 30 min. duty cycle with nonviscous fluid. n P-200H has a gear reduction pump drive for greater performance in medium fluids. n Easily installed in any 2” bung opening & has standard 1” outlet. n Highly portable with a convenient carrying handle.

$712.00 C

Part # Description 119002-17 P120H Replacement Motor 119002-18 P200H Replacement Motor

1-800-373-4084

Price $225.20 C $293.24 C

Call for quantity discounts!

Pumps & Meters

n Lightweight, corrosion resistant cast aluminum body. n 30 min. “Duty cycle” under normal operation. n 1” inlet & outlet ports with a 2” tank bung adapter. n Pumping rate up to 12 GPM at the nozzle, depending upon the fluid viscosity & temperature.

Chemical Hand Pumps / Dry Breaks Fuel & Chemical Hand Pump

Pumps & Meters Pumps & Meters

Chemical Hand Pump

The body of this pump is made of cast aluminum alloy with a stainless steel shaft. Pump construction includes a teflon piston ring and packing, with stainless steel valve springs and inlet screen. The 1” discharge hose maximizes flow. This pump comes with 8’ of 1” hose, a plastic nozzle, and a standpipe which is adjustable from 22” to 40”.

Heavy-duty, double-acting pistonpump for use with herbicides, pesticides, and fumigants. Pump features cork/nitrile gasket, viton O-rings, and viton vacuum breaker. Also included is 8’ of EPDM-lined hose with nozzle and two-piece poly suction tube with standard 2” NPT bung adapter. Pump will discharge one quart per full cycle.

Features n Glass-filled polyester body, valves, piston and coverplate for corrosion resistance. n Stainless steel piston rod and valve springs. n Viton o-rings. n Double acting - pumps on forward and backward strokes. n Handle can be inverted for overhead pumping. n Can be padlocked. n Built-in stainless steel suction strainer. n Built-in siphon breaker to allow hose to drain quickly when pumping stops. n Discharge 1 quart per each full stroke.

Pacer Hand Pump Part # HD-4

$149.00 C

Repair Kit Part # 0167P

$46.00 C

NOTE: These pumps are not recommended for use with products containing chlorinated hydrocarbons. Also, products such as Sutazine, Eradicane Extra and Malathion are not recommended.

Banjo Polypropylene Dry Breaks

NOTE: Pump 100 for fuel; Pump 100C for chemical For chemical Part # HP-100C

$299.00 C

For gas, fuel Part # HP-100

$217.00 C

Part # 114506-2 114505-2 110100-2

Description Price HP-100C Repair Kit $128.58 C HP-100 Repair Kit $64.24 C Adjustable suction pipe, 22” to 40” $53.84 C

The Banjo Dry Mate disconnect is simple. The handles interlock making it easy to identify which handle opens or closes first. Designed for safe and easy spill free connections. Also available in stainless steel. Part #

Description

DM150A DM150D DM200A DM200D

1 1/2” Male Dry-Mate, FPT 1 1/2” Female Dry-Mate, FPT 2” Male Dry-Mate, FPT 2” Female Dry-Mate, FPT

Opening (in.) 1 1/2” 1 1/2” 1 1/2” 1 1/2”

Price $232.37 $248.38 $232.37 $248.38

H H H H

Also available in stainless steel

www.horvick.com

Chemical Flow Meters Sotera Series 820 Meters

Sotera Series 800C Meter Formerly Fillrite

Pumps & Meters

The Series 800C Meter is a nutating disc flow meter with a mechanical register. The meter’s exclusive uni-cast component mounting configuration assures consistency. The easily reset register indicates product use up to 99.9 gallons. A teflon coating on the aluminum housing increases the selection of compatible fluids. FR-807CN1

$283.49 W

Specifications: The Series 820 Digital Meter is a rotating disc, positive displacement Formerly Fillrite meter. The meter can store and display the current flow amount or cumulative flow amount in any of six user specified units or special units. The meter can be calibrated without dispensing fluid simply by selecting a calibration factor from 20 stored settings. Power is supplied by two AA replaceable batteries.

FR-825

$208.95 W

nn50 PSI maximum nnLarge, easy to read numbers nnQuick reset knob nnTotalizer nnAccurate to within +/- 1%

Sotera Series 900 Meter

Specifications: nn1” NPT inlet/outlet ports, female threads nn2 to 20 GPM nn1” NPT flow ports nnMax. temperature: 130°F / 54°C nnMin. temperature: 0°F / -17°C nn120 PSI maximum

nn5 to 20 GPM nn3/4” NPT flow ports (1” OPTIONAL) nnMax. operating temperature: 1500 F/660 C

nnAccurate to within +/- 0.5% using calibration factor nnAccurate to within +/- .2% using liquid calibration nnCompact, durable, and easy to use nnQuick, one step calibration

REPAIR KIT, 820/825/850 Part # F1582

$78.60 C

The Series 900 Meter is a nutating disc flow meter. The mechanical register contains large easy-to-read numbers and quick reset knob. A teflon coating on the aluminum housing increases the selection of compatible fluids.

Formerly Fillrite

Series 900 Meter Part # FR-901N-112

$366.82 W

Specifications: nn6 to 40 GPM nnAccurate to within +/- 2% nn1” NPT inlet/outlet ports (1-1/2” OPTIONAL) nnMax. temperature: 1500 F/660 C nn50 PSI maximum nnLarge, easy to read numbers nnQuick reset knob nnAccumulative totalizer

1-800-373-4084

Herbicide Meters GPI Nylon Electronic Digital Meter Features

Pumps & Meters Pumps & Meters

nnUse with water or herbicides to meter 3 to 50 GPM nnInlet and outlet are 1” nnMaximum working pressure of 150 PSI nnField-replaceable batteries nnCalibration capabilities nnAutomatic on and off Part # 3N31-GM (3-50 GPM)

$423.00 C

Part # 113520-1 Battery Kit

$38.86 C

Part # 3N30-GM (.3-3 GPM)

$444.00 C

GPI Nutating Disc Meter For Non-Viscous Herbicides

Features.. nnTime proven nutating disc meters provide reliable operation nnCompact & lightweight cast aluminum housing & special seals for corrosion resistance nnMount in vertical or horizontal position nnUse with pump or gravity feed system in the 4-20 GPM output range nnFactory calibrated in U.S. Gallons for non-viscous herbicides nnEasily calibrated for a long list of herbicides & compatible chemicals FM100H Nutating Disc Meter Part # FM100H

$268.00 C

Repair Kit Part # 111507-1

$55.56 C

GPI Plastic Electronic Disc Meter Features nnFlow rate Thin fluids- 2-20 GPM Medium/Thick fluid- 1.5-15 GPM nnWorking pressure- 50 PSI nnPower requirements- field replaceable 9v battery nnAccuracy- +/- 1/2% with calibration nnInlet- 1” Female (NPT Thread) nnOutlet- 1” Male (NPT Thread) Part # FM300H

$311.00 C

www.horvick.com

Herbicide Equipment Herbicide Suction Drop Tubes and Hose Part # 111502-2

NOTE: Herbicide pumps come without hose, drop tubes, or nozzles— please order separately.

Price $99.00 C $53.84 C $39.00 V $57.00 C $33.00 V $5.80 V

Nozzle Valves ®

Part # VN-100

n Glass filled polypropylene n Stainless steel handle, spring and pin n Teflon pin bushing n Viton rubber parts n Resists corrosion n Padlock capability n 75 PSI maximum n 40 GPM

$72.24 H

Barrel Adapters Part # MBP200 2” MPT x 2” male aircraft shuttle thread

$13.79 H

Part # TA283 2” female aircraft shuttle thread x 2” mpt adapter

$22.43 H

Calibration Containers Mac Mug (1-Quart) Part # MACMUG-1

$7.50 V

5-gallons Part # 116000-1

$90.30 C

(2-Quart) Part # MACMUG-2

$8.25 V

128 oz Part # MUG-100

$13.95 V

1-800-373-4084

Pumps & Meters

110100-2 110094-1 115527-2 CBDP-40 CBB-200

Description Hose/nozzle kit (includes suction pipe, discharge hose, nozzle, 45° ball valve) Plastic adjustable suction pipe, 22“ to 40“ 1“ x 12 ft. hose w/ends 15“ extension pipe 40” chemical drop pipe: non-adjustable 2” barrel adaptor with slip fitting for pipe

Fuel Meters & Pumps GPI Nozzle Meter

Sotera Series Flow Meter

Inlets and Outlets are 1” Sotera meters provide precision and durability in a cost-effective design. The Sotera Series 807CMK meter is a nutating disc flow meter. The Series 807CMK meter’s exclusive uni-cast component mounting configuration assures consistency, particularly in gravity flow applications.

Part # 1A31-GM

Pumps & Meters Pumps & Meters

$172.50 C Meet the 1A31-GM, a compact, 12 ounce dynamo. Put the meter at the nozzle where it belongs and forget about straining to see a readout several feet away. Highly accurate, yet durable computer components

are powered by two AAA batteries that you change only once a year. A fresh, new approach that doesn’t sacrifice the quality and dependability you’ve come to know and trust. Maximum of 300 PSI.

Model 807CMK Part # FR-807CMK

It measures fluids at temperatures up to 150° F and pressures up to 50 PSI.

Features:

n 5 to 20 GPM n Accurate to within +/- 1% n 3/4” NPT flow ports n Quick reset knob n Large, easy to read numbers n Totalizer

$239.59 W

Fill-Rite DC Fuel-Transfer Pump 25 GPM—12 volts The FR3200 Series Pump makes filling tanks at remote job sites quicker and more efficient. Delivering up to 25 gallons per minute, the FR3200 can fill a 500-gallon tank in just 20 minutes. That means less downtime, greater productivity, and more reward for your hard work. And it’s built strong to provide long-lasting reliability in the most demanding off-road environments. The FR3200 Series offers two options: the FR3204 (pump only) and the FR3210B, which includes a 1-inch ultra-high-flow automatic nozzle and an 18-foot, 1-inch hose with a static wire.

Model FR3200 Pump Part # FR-3204

$699.00 W

Features

12V DC, 1/2 HP, thermally protected motor 30-minute duty cycle Heavy-duty cast-iron construction Self-priming, up to 12’ of lift Theft-deterrent lockable nozzle 2” NPT tank adapter 20’, 10-gauge battery cable included Diesel, gasoline, kerosene, E15, and BD up to B20

www.horvick.com

Pump Seals Mechanical Shaft Replacement Seal Pac-Seal FEATURES......

ANT! IMPORT rime p Always e starting, r o f pump beelf-priming, s if or p casing m u p e r u be s is filled.

nnPRECISION-LAPPED SEALING FACES positively control leakage and eliminate “break-in” runs HIGH SPEEDS AND HIGH PRESSURES are handled efficiently with PAC-SEAL seals. nnPOSITIVE DRIVE prevents the transmission of breakout and running torque stresses MATING FACE FINISHES are prepared to precise flatness and RMS surface finish standards, maintaining the necessary film of lubricant

Pump Mfg. Mfg. # Cross Ref. # Ace BAC-7V RS806125V Banjo 17035 RS245V Banjo 12713 RS601ESS Banjo 12713-V RS601VSS Banjo 18025 RS11558V Delevan 34945-1 RS200V Homelite 43303-A RS601ESS Hypro 2120-0009 RS200V Hypro 2120-0011 RS201V Monarch 240359 RS185V Monarch 240136 RS200V Monarch 240344 RS201V MP/Flomax 22272 RS245V MP/Flomax 22361 RS11558V Pacer 714.14 RS601VSS Scot 101.000.194 RS185V Scot 101.000.115 RS201V

Price $29.00 H $53.00 H $21.00 H $39.00 H $85.00 H $29.00 H $21.00 H $29.00 H $29.00 H $63.00 H $29.00 H $29.00 H $53.00 H $85.00 H $39.00 H $63.00 H $29.00 H

Shaft Seal Installation… 1. As you disassemble pump housing to reach defective seal, note how the old seal is installed.

stationary seal seat with a light multipurpose oil (but DO NOT oil the seal surfaces).

2. Carefully remove old seal head without scratching shaft or seal counterbore.

NEVER use grease or heavy oil on seal faces or leaks may occur.

3. With fine emery cloth, clean shaft and counterbore surfaces to remove burs and rust without creating flat spots or reducing shaft diameter. 4. Oil the shaft, rubber inner diameter of the rotating seal head, and the rubber outer diameter of the

1-800-373-4084

Finger marks and dirt will damage lapped faces of new seal seat and seal ring. 5. Press seal seat firmly into counterbore. If extra force is needed, cushion seal seat with a piece of plastic. Avoid striking seal face directly with metal.

completely free of any particles. Then slide the rotating seal head along the shaft, using only your hands, until the seal makes complete, parallel contact with the stationary seat. Make sure the spring correctly engages shoulder of the seal head and impeller shoulder or shaft spring retainer. 7. Reassemble the impeller and pump housing.

6. Make sure both seal surfaces are

Pumps & Meters

Seal components are crimped for trouble-free assembly and performance

nnABSOLUTE SEALING results in less pumpage losses, cleaner plants, less fire hazard, no danger from fumes and no contamination of the fluids handled nnNO RUBBING FRICTION BETWEEN SHAFT AND SEAL PARTS eliminates any need for replacement of expensive shafts or sleeves once PAC-SEAL seals have been installed nnLOWER FRICTION because less rubbing area is required to effect a seal. Saves power.

Suction Hose

No return of any cut lengths of hose!

Rubber Wire Suction (T-203) Made of black weatherresistant EPDM rubber with double steel helix wire reinforcement, this hose is used for water, liquid fertilizer, and chemical transfer.

Part # RWS150 RWS200 RWS300 RWS400

Size (in.) 1-1/2 2 3 4

Price/ft

PSI 125 125 90 75

$7.69 $7.79 $12.79 $19.39

V V V V

Price/Roll* $711.00 $720.00 $1,183.00 $1,793.00

H H H H

*add R to end of Part # when ordering rolls (all are 100’ in length)

Crosslink (T-509)

Hoses & Accessories

Made of blue abrasion and weather resistant EPDM rubber, this hose incorporates high tensile tire cords and double steel helix wires. It is used for transfer of most bulk chemicals.

PVC Suction (PVC-CL) Made of flexible, clear PVC (Poly Vinyl Chloride) with a white PVC helix,with smooth surface both inside and outside. Used for water suction and transfer. Also used on air seeders!

Part # XLH100 XLH125 XLH150 XLH200

Part # PVC075 PVC100 PVC125 PVC150 PVC200 PVC250 PVC300 PVC400 PVC500R PVC600R

Size (in.) 1 1-1/4 1-1/2 2

Size (in.) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

PSI 86 86 79 72 72 72 62 35 33 33

PSI 200 200 200 200

Price/ftNet $9.39 NET $10.99 NET $12.15 NET $13.45 NET

Price/ft $0.93 V $1.06 V $1.27 V $1.59 V $2.31 V $3.85 V $4.59 V $8.85 V ** ***

Price/Roll* $86.00 $98.00 $117.00 $147.00 $214.00 $355.00 $424.00 $818.00 $863.00 $1,749.00

H H H H H H H H H H

*add R to end of Part # when ordering rolls (all are 100’ in length excepts) ** No cut lengths—Roll is 28’ for 5” hose *** 100ft rolls only

Bumblebee (#300 EPDM ) Made of black EPDM rubber with a green polyethylene helix with smooth surface inside and ridged surface outside. Used for water, liquid fertilizer, chemical suction, and transfer.

Part # BBH100 BBH125 BBH150 BBH200 BBH250 BBH300 BBH400

Size (in.) 1 1-1/4 1-1/2 2 2-1/2 3 4

PSI 50 50 50 50 50 43 38

Price/ft $2.15 $2.44 $2.73 $3.89 $6.68 $7.69 $14.59

V V V V V V V

Price/Roll* $198.00 $225.00 $252.00 $360.00 $549.00 $710.00 $1,295.00

H H H H H H H

*add R to end of Part # when ordering rolls (all are 100’ in length)

ESH (390 SD) EPDM Rubber

Made of black EPDM rubber with nylon braided reinforcement with a smooth inside and ridged outside. Used for suction and transfer when higher pressures are required for agricultural chemicals.

Part # ESH125 ESH150 ESH200 ESH300

Size (in.) 1-1/4 1-1/2 2 3

PSI 100 125 125 90

Price/ft $4.03 $4.82 $6.30 $10.92

V V V V

Price/Roll* $372.00 $445.00 $583.00 $1,009.00

H H H H

*add R to end of Part # when ordering rolls (all are 100’ in length)

www.horvick.com

Sprayer Hose

No return of any cut lengths of hose!

Rubber Spray

Made of black EPDM rubber tube and covered with a single nylon braid reinforcement, this hose is flexible and resistant to weather and chemical solutions.

Heavy Duty Rubber Spray

Size (in.) 1/4 3/8 1/2 5/8 3/4 1

Price/ft

PSI 150 150 150 150 150 150

$0.69 $0.82 $1.17 $1.38 $1.62 $2.39

Price/Roll*

V V V V V V

$64.00 $76.00 $108.00 $127.00 $149.00 $220.00

H H H H H H

*add R to end of Part # when ordering rolls (all are 100’ in length)

Part # Size (in.) RSH025HD 1/4 RSH038HD 3/8 RSH050HD 1/2 RSH058HD 5/8 RSH075HD 3/4 RSH100HD 1 RSH125 1-1/4 RSH150 1-1/2 RSH200 2

Price/ft

PSI 250 250 250 300 250 300 200 200 200

$1.14 $1.40 $1.83 $2.25 $2.30 $3.37 $4.79 $5.59 $8.59

Price/Roll*

V V V V V V V V V

$86.00 $130.00 $169.00 $208.00 $213.00 $311.00 $443.00 $517.00 $680.00

H H H H H H H H H

*add R to end of Part # when ordering rolls (all are 100’ in length)

PVC 600#(Ag Spray) This is high pressure hose reinforced with high tensile strength yarn and a corrugated cover for increased flexibility. This hose can be used with fertilizers, herbicides, and insecticides.

EVA (translucent or black) Made of ethyl vinyl acetate (EVA). Use it for NH3 application, most common herbicides and insecticides, and all liquid fertilizers.

Part # PHP038 PHP050

Size (in.) 3/8 1/2

PSI 600 600

Price/ft

Price/Roll*

$1.29 V $1.80 V

$358.00 H $499.00 H

*add R to end of Part # when ordering rolls (all are 300’ in length)

Part # EVA025 EVA038 EVA050 EVA058 EVA075 EVA100

Size (in.) 1/4 3/8 1/2 5/8 3/4 1

Ft. per Roll 100 500 300 200 200 100

PSI 75 75 75 60 60 60

Price/ft $0.37 $0.61 $0.75 $1.02 $1.12 $1.64

V V V V V V

Price/Roll* $34.00 $271.00 $202.00 $183.00 $200.00 $147.00

V V V V V V

*add R to end of Part # when ordering rolls (Black available-add -B to end of part #)

Braided EVA Tubing Made of ethyl vinyl acetate Part # Size Ft. per Price/ft (EVA) tubing, with synthetic (in.) PSI Roll cord reinforcement, this BEVA025 1/4 300 300 $1.22 V hose resists cracking under BEVA038 3/8 250 300 $0.95 V stress and low temperatures. BEVA050 1/2 200 300 $1.24 V Use for applying NH3, most BEVA058 5/8 250 300 $2.09 V BEVA075 3/4 150 300 $1.88 V common herbicides and BEVA100 1 150 100 $3.29 V insecticides, and all liquid fertilizers requiring higher *add R to end of Part # when ordering rolls pressures.

1-800-373-4084

Price/Roll* $338.00 $262.00 $343.00 $581.00 $522.00 $304.00

H H H H H H

Hoses & Accessories

Made of black EPDM rubber tube with a double nylon braid covering, this hose is used for materials requiring high pressures.

Part # RSH025 RSH038 RSH050 RSH058 RSH075 RSH100

Hose

No return of any cut lengths of hose!

Sight Gauge PVC Hose (clear) Braided Sight Gauge Tubing This clear, vinyl tubing (resistant (K-3150) to acids, alkalies, and most solvents) allows liquids to be monitored visually.

Price/ft Price/Roll* $0.19 $0.59 $0.80 $0.98 $1.06 $1.30 $1.62

V V V V V V V

$17.15 $54.00 $73.50 $91.00 $98.00 $120.00 $149.00

H H H H H H H

Part # BVT025 BVT038 BVT050 BVT058 BVT075 BVT100

Inside Dia (in.) 1/4 3/8 1/2 5/8 3/4 1

Roll Size 100’ 100’ 100’ 100’ 100’ 100’

PSI 225 225 200 200 150 125

Price/ft Price/Roll* $0.45 $0.77 $0.90 $1.19 $1.43 $2.04

*add R to end of Part # when ordering rolls (all are 100’ in length)

*add R to end of Part # when ordering rolls

BL-180 Grain Handling

620WD Downspout

This heavy duty grain vacuum hose has a long wearing, smooth rubber interior and remains flexible in subzero temperatures. Part # BL180-3 BL180-4 BL180-5 BL180-6 BL180-7 BL180-8

Size (in.) 3 4 5 6 7 8

Price/ft $8.30 V $14.50 V $19.35 V $25.00 V $37.45 V $41.00 V

*Please call for prices on our AR-180 hose *We also have extra heavy duty hose available

V V V V V V

$42.00 $71.00 $83.00 $110.00 $132.00 $189.00

H H H H H H

This lightweight downspout hose is rubber-wrapped wire and is very flexible. Part # 620WD-250 620WD-3 620WD-4 620WD-5 620WD-6 620WD-7 620WD-8 620WD-10 620WD-12

No warra on wear for nty gr transfer ho ain se

Size (in.) 2-1/2 3 4 5 6 7 8 10 12

Price/ft $5.95 V $6.25 V $6.45 V $8.19 V $9.50 V $12.19 V $13.49 V $18.79 V $21.95 V

Rubber Discharge (T253) This heavy duty rubber hose is resistant to abrasion and weather. Used to discharge water in tough operating conditions.

Part # RDH150 RDH200 RDH300

Size (in.) 1-1/2 2 3

PSI 150 150 150

Price/ft

Price/Roll*

$6.47 V $7.69 V $12.56 V

$598.00 H $710.00 H $935.00 H

*add R to end of Part # when ordering rolls (all are 100’ in length)

PVC Lay-Flat Discharge Light-Blue (SF-10E)

The light-blue polyvinyl chloride hose performs standard duty water discharge for agricultural purposes. The heavy duty red version withstands higher pressures.

Red (170R)

Hoses & Accessories

Part # SGH018 SGH025 SGH038 SGH050 SGH058 SGH075 SGH100

Wall Inside Dia Thickness PSI (in.) (in.) 3/16 1/32 50 1/4 3/32 58 3/8 1/8 55 1/2 1/8 45 5/8 1/8 40 3/4 1/8 35 1 1/8 25

Made of clear polyvinyl chloride reinforced with spiraled polyester cords, this hose can be used for all of the most common liquid fertilizers requiring high pressures.

Part # Size (in.) PVCD150 1-1/2 PVCD200 2 PVCD250 2-1/2 PVCD300 3 PVCD400 4 PVCD600 6 PVCD150HD 1-1/2 PVCD200HD 2 PVCD250HD 2-1/2 PVCD300HD 3 PVCD400HD 4

PSI 85 80 70 70 50 40 145 145 128 128 125

Price/ft $0.64 V $0.75 V $1.75 V $1.54 V $2.69 V $4.90 V $1.83 V $2.30 V $3.82 V $5.96 V $7.60 V

Price/Roll* $177.00 H $206.00 H $463.00 H $427.00 H $745.00 H $1,249.00 H $507.00 H $639.00 H $793.00 H $1,654.00 H $1,595.00 H

*add R to end of Part # when ordering rolls (all are 300’ in length)

www.horvick.com

Pressure Line Tubing & Fittings Pressure Line Tubing

Air Seeder Hose

Abrasion resistant hose is ideal for air seeders.

Ideal for connecting remote pressure gauges.

Part # PVC125 PVC250

Tube Size* 1/8” 1/4” 1/4” Blk 3/8” 1/2”

ROLLS

Part # TR-TUBING per ft. 214-0001-001 per ft. 214-0001-001B per ft. AG-AL PLT-050

Price $0.29 H $0.31 H $0.31 H $0.38 H $0.45 H

Description 1-1/4” PVC hose 2-1/2” PVC hose

Price $1.27 /ft.V $3.85 /ft.V

PVC500R PVC500R-28

5”x 56ft. PVC hose 5”x 28ft. PVC hose

$863.00 H $432.00 H

AR180-125R AR180-150R AS250R-100

1-1/4”x 100ft. Air seeder hose 1-1/2”x 100ft. Air seeder hose 2-1/2”x 100ft. Air seeder hose

$488.00 H $524.00 H $433.00 H

* Outside diameter

Pressure Line Tubing Fittings

JGME

JGMC Sizes MPT 1/8” 1/8” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2”

Tube OD 1/4” 3/8” 1/4” 3/8” 1/4” 3/8” 1/2” 3/8” 1/2”

Sizes 1/4” 3/8” 1/2”

Quick Connect MPT Part # Price JGMC24 JGMC26 JGMC44 JGMC46 JGMC64 JGMC66 JGMC68 JGMC86 JGMC88

$2.89 $6.62 $3.33 $4.98 $4.57 $5.73 $7.70 $8.90 $8.31

H H H H H H H H H

JGFC

Quick Connect Elbow MPT Part # Price JGME24 — JGME44 JGME46 JGME64 JGME66 — — —

$4.51 H — $5.14 H $7.70 H $6.11 H $8.45 H — — —

JGUC

JGCV

Quick Connect Union Part # Price JGUC44 $4.51 H JGUC66 $6.09 H JGUC88 $7.07 H

Check Valve Part # Price JGCV44 $14.50 H JGCV66 $15.00 H

FPT 1/8” 1/4” 1/4”

JGUL Quick Connect Elbow Part # Price JGULC44 $5.14 H JGULC66 $7.70 H JGULC88 $9.19 H

Connector Model 1181

Union for Model 1182

1/8” MPT x 1/8” OD compression connector. Part# 1181

1/8” OD compression union Part# 1182

$3.19 H

1-800-373-4084

Quick Connect FPT Tube Part # OD 1/4” JGFC24 1/4” JGFC44 3/8” JGFC46

Price $7.50 H $7.09 H $8.14 H

JGUT Quick Connect Tee Part # Price JGUTC444 $6.57 H JGUTC666 $8.10 H JGUTC888 $9.81 H

$4.60 H

Hoses & Accessories

No return of any cut lengths of hose!

Hose Reels & Hose Cutters Hose Cutters These lightweight, easy-to-carry tubing cutters will handle all hose cutting chores. The handles are tough nylon and the cutters have a stainless steel blade.

Poly Swivel Lil Nipper Hose Cutter (up to 1-1/4” hose) Part # LIL NIPPER

$10.95 V

Big Nipper Hose Cutter (up to 2-1/2” hose) Part # BIG NIPPER

Part # MPT FPT Price (in.) (in.) SW100 1 1 $15.95 H SW150 1-1/2 1-1/2 $19.53 H SW200 2 2 $21.89 H SW220 2 2 $36.45 H 2” full port flange MSW220 2 2 $36.45 H

Mini Nipper Hose Cutter (up to 1” hose) Part # MINI NIPPER

$13.95 V

$5.95 V

Hoses & Accessories

Hannay Hose Reels Model 1500 for smaller hose diameters Model 9000 for 2” & 3” hoses The model 1500 Hannay hose reels are perfect for turf sprayers. Hannay hose reels are available in custom sizes not shown here. Please call for information.

Model 1500 Part # 1514-17-18 1514-17-18E* 1526-17-18 1526-17-18E*

Capacity (ft) 3/8” 1/2” 140 100 140 100 450 325 450 325

Net Price $305.00 NET $690.00 NET $305.00 NET $690.00 NET

Model 9000 Part # 2” 3” Net Price 9338-39-40-ERT 185 80 $2,600.00 NET

Model 1500

* E models have 12 Vdc electric rewind

Model 9000

ATV Hose Reel & Wand

Horvick Hose Reels Manual or Electric Models

nnWith wand and 30ft of hose.

nnManual or Electric rewind nnHolds 60’ of 2” hose nnHigh flow swivel nnHose guides nnGreaseable bearing surfaces

Desc Hose Reel 1” Electric Hose Reel 2” Manual Hose Reel 2” Electric Hose Reel 3” Electric O-ring Kit, 2” Reel O-ring Kit, 3” Reel Electric Motor Control Unit Handle & Shaft Assembly

Part # ATVHR

$119.00 K

Part # HRE100 HR200 HRE200 HRE300 HR02-K HR03-K HR10 HR11 HRE-MH

Price $642.00 NET $845.00 NET $1,035.00 NET $1,489.00 NET $2.20 NET $2.35 NET $209.00 NET $49.00 NET $30.00 NET

www.horvick.com

Hose Clamps Micro-Gear

Standard

The MH micro-gear hose clamp has a 301 stainless band and housing. The clamp is all stainless steel. A box contains 10 clamps.

The HS standard hose clamp has a 301 stainless band and housing. The clamp is all stainless steel. A box contains 10 clamps.

Part # MH-4 MH-6 MAH-4 MAH-6

Dia. Spread (in.) From To 7/32 5/8 5/16 7/8 7/32 5/8 5/16 7/8

Price ea. $0.56 $0.59 $0.76 $0.81

H H H H

Part #

Quick-Release

Part # LS48 LS88 LS104 LS128 LS152 LS188

Dia. Spread (in.) From To 1-1/2 3-1/2 2-1/16 6 1-3/4 7 1-3/4 8-9/16 2 10 2-1/16 12-5/16

Price $1.90 H $2.80 H $2.85 H $3.30 H $3.35 H $3.65 H

Economy Ties

Length (in.) 7 11 14

Qty/Pkg 100 100 50

Price/Pkg $3.95 H $6.50 H $5.55 H

Tyton Cable Ties Cable ties can be used for a large number of applications, from holding wire bundles together to securing hose to spray booms. They will give any project a neat, uncluttered look.These cable ties are ultraviolet light tolerant and weather resistant. Part # T-30-L T-40-I T-40-L T-150-M T-150-L

Approx ) Lgth (in. 7-1/2 11-1/2 14-1/2 21 32

Max. Size (in.) 1-3/4 3 4 6 9

Qty/Pkg 100 100 100 25 25

1-800-373-4084

Price/Pkg $5.25 $12.95 $15.75 $10.25 $14.60

H H H H H

HSS (each) $1.07 H $1.07 H $1.09 H $1.10 H $1.13 H $1.13 H $1.14 H $1.14 H $1.20 H $1.55 H — — — —

T-Bolt Clamp This T-bolt clamp has a .025” thick stainless steel band, stainless nut with nylon lock and a carbon steel bolt. T-bolt clamps offer higher torque than standard clamps for superior holding power. Part #

Part # 13752 13730 13756

HS (each) $0.69 H $0.69 H $0.69 H $0.75 H $0.79 H $0.85 H $0.85 H $0.85 H $0.90 H $1.19 H $1.39 H $2.15 H $2.15 H $2.49 H

TBC075 TBC100 TBC150 TBC175 TBC200 TBC225 TBC238 TBC250 TBC263 TBC275 TBC300 TBC325 TBC350 TBC375 TBC400 TBC425 TBC450

Dia. Spread (in.) From To 0.91 .98 1.14 1.22 1-9/32 1-19/32 1-17/32 1-27/32 1-25/32 2-3/32 2-1/32 2-11/32 2-5/32 2-15/32 2-9/32 2-19/32 2-13/32 2-23/32 2-17/32 2-27/32 2-25/32 3-3/32 3-1/32 3-11/32 3-9/32 3-19/32 3-17/32 3-27/32 3-25/32 4-3/32 4-1/64 4-5/16 4-17/64 4-18/32

Price $11.62 H $11.74 H $5.50 V $5.50 V $5.50 V $5.50 V $5.50 V $5.70 V $5.70 V $5.70 V $5.70 V $5.70 V $5.90 V $5.90 V $5.90 V $6.50 V $6.50 V

T-Bolt Clamp Size Chart Hose Size PVC100 PVC125 PVC150 PVC200 PVC250 PVC 300

T-bolt Clamp Hose size — BBH100 TBC175 BBH125 TBC175 BBH150 TBC238 BBH200 TBC275 BBH300 TBC350 —

T-bolt Clamp TBC150 TBC175 TBC200 TBC250 TBC375 —

Hose Size ESH125 ESH150 ESH200 ESH300 — —

T-bolt Clamp TBC175 TBC200 TBC250 TBC375 — —

Hoses & Accessories

The LS quick release clamp has a 301 stainless steel housing and band with a plated, hardened carbon steel screw.

HS-6 HS-10 HS-12 HS-16 HS-20 HS-24 HS-28 HS-32 HS-36 HS-48 HS-64 HS-88 HS-96 HS-104

Diameter spread Min Max 3/8” 7/8” 9/16” 1-1/16” 9/16” 1-1/4” 11/16” 1-1/2” 3/4” 1-3/4” 1-1/16” 2” 1-5/16” 2-1/4” 1-9/16” 2-1/2” 1-13/16” 2-3/4” 2-9/16” 3-1/2” 2-1/2” 4-1/2” 3-3/32” 6” 4” 6” 5” 7”

Dry Breaks Micro-Matic Macro Valve

Seal Kits:

The Macro Valve coupler eliminates chemical container rinsing and disposal. The efficient, closed system minimizes user exposure in liquid transfer systems.

EPDM Part # DL-MM-SK-E

Viton Valve Part # 724-065

VITON Part # DL-MM-SK

$235.00 W

Macro Valve Accessories

EPDM Valve Part # 724-067

$231.00 W

$16.40 W

$27.50 W

User Kits: EPDM Kit (includes: mounting bracket, rinsing socket and coupler) Part # DL-MM-KIT

Mounting Bracket Part # 2MAV1-003

$36.00 W

$357.00 W

Rinsing Socket (EPDM) Part # 2MAV1-008

$100.00 W

VITON Kit (same as above) Part # DL-MM-KIT-V

$362.00 W

Ref. # Part # 1 100-615 2 724-320 3 102-525 102-875 4 102-746 102-872 5 102-848 6 724-106 7 724-112 8 102-553 102-874 9 724-131 724-133 10 724-102 11 748-100

Description NRV Spring NRV Spring Retainer Probe Seal, EPDM Probe Seal, Viton O-ring, EPDM O-ring, Viton Washer Nylon Thread Adap Assem. Side Entry Filter Main Gasket, EPDM Main Gasket, Viton PRV Assem. (EPDM) PRV Assem. (Viton) Handle Hinge Pin Pull Handle Assem.

Price $4.60 W $9.99 W $3.76 W $7.53 W $2.09 W $3.60 W $0.84 W $8.28 W $0.87 W $13.33 W $20.91 W $21.00 W $22.55 W $4.60 W $46.00 W

* Seal Kits include reference #’s (3 and 8), and then whether it’s Viton or EPDM.

Drum Valve Fittings

Reduces operator exposure and improves worker safety. Offers closed system filling and evacuation. Easy to handle and operate, simplifies drum emptying and improves general cleanliness. Viton Valve Part # 744-003

$123.00 W

EPDM Valve Part # 744-002

$107.00 W

Coupler Rinsing Socket (EPDM) Part # 2DV3-001

$77.00 W

Tube Only (not pictured) Part # 743-203

w/o Barb Part #

Description

743-007 743-008

2” BSP (EPDM) 2” BSP (Viton)

$39.00 W $41.00 W

743-086 743-087

2.5 X 5 Buttress (EPDM) 2.5 X 5 Buttress (Viton)

$39.00 W $42.00 W

Drum Valve Coupler Spare Parts Part # 102-067 102-068

Description Price Main Gasket (EPDM) $5.43 W Main Gasket (Viton) $8.28 W

744-314

Dry Break Metal Insert

102-073

Coupler Probe Seal (EPDM) Coupler Probe Seal (Viton)

102-074

$4.97 W

Price

$117.00 W

Drum Valve Accessories Installation/Removal Tool Part # 741-015

Barrel Adapters

$4.26 W $2.51 W $9.20 W

www.horvick.com

Fittings Hose Barbs

How to read the part number. Example:

Part # HB1238

MPT (in.) 1/2

Barb (in.) 3/8

Price .39

MPT Barb

Polypropylene

Male Part #

Sch. 80

Steel

Stainless Steel–Hex Style

Female* Price Part #

Price Part #

1-800-373-4084

Price

$3.60 H

$4.40 H

$5.75 H

$6.40 H

$9.60 H

$13.00 H

$16.85 H

$29.00 H $105.00 H

Fittings

HB1814 $0.36 H HB18316 $0.37 H HB1838 $0.33 H A-6132 1/8x3/8 $1.63 V HB14 $0.37 H BHB14 $1.13 H HB14S $4.05 H KN14SS *FHB14 $1.77 H HB14316 $0.37 H HB1438 $0.36 H BHB1438 $1.13 H *FHB1438 $1.77 H HB1412 $0.37 H BHB1412 $1.19 H A-1138 1/4x1/2 $2.01 V HB3814 $0.37 H *FHB3814 $1.76 H HB38 $0.38 H BHB38 $1.21 H HB38S $4.18 H KN38SS *FHB38 $1.70 H HB3812 $0.41 H BHB3812 $1.21 H HB3812S $3.62 H *FHB3812 $1.79 H HB3858 $0.39H HB3834 $0.99 H HB1214 $0.41 H HB1214S $5.14 H HB1238 $0.44 H BHB1238 $1.21 H HB1238S $5.14 H HB12 $0.39 H BHB12 $1.21 H HB12S $5.09 H KN12SS *FHB12 $1.37 H HB1258 $0.43 H HB1258S $6.30 H HB1234 $0.44 H BHB1234 $1.33 H HB1234S $5.14 H HB12100 $1.48 H HB3414 $0.51 H HB3438 $0.51 H BHB3438 $1.33 H HB3412 $0.53 H BHB3412 $1.33 H HB3412S $7.04 H HB3458 $0.53 H BHB3458 $1.65 H HB34 $0.54 H BHB34 $1.33 H HB34S $5.94 H KN34SS *FHB34 $2.02 H HB34100 $0.73 H BHB34100 $1.65 H HB34100S $12.95 H HB10034 $0.80 H BHB10034 $1.65 H BHB100 $1.65 H KN100 $7.05 H KN100SS BHB100114 $2.02 H BHB11434 $2.02 H BHB114100 $2.02 H BHB114 $2.02 H KN114 $9.90 H KN114SS BHB114112 $3.85 H BHB112100 $3.02 H BHB112114 $3.02 H HB112-80 $1.91 H BHB112 $3.37 H KN112 $10.25 H KN112SS BHB112200 $5.18 H BHB200112 $5.18 H HB200-80 $2.80 H BHB200 $4.13 H KN200 $12.55 H KN200SS HB300-80 $8.10 H BHB300 $13.32 H KN300 $24.00 H KN300SS HB400-80 $18.28 H BHB400 $27.92 H

Fittings Hose Barb Elbows and Menders

How to read the part number. Example:

Part # HB1238

MPT (in.) 1/2

Barb (in.) 3/8

Price .39

MPT Barb Hose Menders

Hose Barb Elbows

Poly

Sch. 80 Poly

Poly

Fittings

*Female Male Part # Price Part # Price Part #

Poly

Price Part #

Sch. 80 Poly

Price Part #

HM18 $0.30 H HM316 $0.28 H HBE1814 $0.62 H HBE1838 $0.63 H HBE14 $0.67 H BHBE14 $1.33 H HME14 $0.62 H HM14 $0.37 H BHM14 HBE14316 $0.58 H HBE1438 $0.68 H HBE1412 $0.68 H HBE3814 $0.68 H HM3814 $0.37 H HBE38 $0.73 H BHBE38 $1.33 H HME38 $0.65 H HM38 $0.41 H BHM38 HBE3812 $0.70 H *FHBE3812 $1.89 H HBE3858 $0.75 H HBE1214 $0.71 H HME1214 $0.82 H HM1214 $0.38 H HBE1238 $0.71 H BHBE1238 $1.33 H HME1238 $0.81 H HM1238 $0.47 H HBE12 $0.71 H BHBE12 $1.33 H HME12 $0.68 H HM12 $0.43 H BHM12 HBE1258 $0.91 H HM1258 $0.48 H HBE1234 $0.95 H BHBE1234 $1.33 H HBE12100 $1.52 H HME58 $0.78 H HM58 $0.47 H HBE3414 $0.82 H HBE3438 $0.97 H HBE3412 $0.96 H BHBE3412 $1.69 H HM3412 $0.85 H *FHBE3412 $1.68 H HBE3458 $1.00 H HBE34 $1.01 H BHBE34 $1.69 H HME34 $0.92 H HM34 $0.60 H BHM34 *FHBE34 $1.68 H HBE34100 $1.12 H BHBE34100 $1.69 H BHBE10034 $2.17 H BHBE100 $2.17 H HME100 $1.32 H HM100 $0.79 H BHM100 BHBE100114 $2.66 H BHBE114100 $2.66 H BHBE114 $2.66 H HME114 $5.08 H HM114 $1.89 H BHM114 BHBE112 $7.64 H HME112 $4.86 H HM112 $2.07 H BHM112 BHBE200 $8.37 H HME200 $9.48 H BHM200 BHBE300 $40.45 H BHM300

Price

$1.24 H

$1.26 H

$1.38 H

$1.69 H

$1.90 H $3.37 H $4.24 H $13.23 H

** Also available in Banjo

www.horvick.com

Fittings Reducer Bushings

How to read the part number. Example:

Part # RB1238

MPT (in.) 1/2

FPT (in.) 3/8

Price .35

MPT FPT Polypropylene Std. Poly Sch 80 - Generic

Sch 80 Banjo Brand

Steel Sch 40

Sch 80

Stainless

Couplers Polypropylene Std. Poly Sch 80 - Generic

Sch 80 Banjo Brand

Steel Sch 40

Sch 80

Stainless

Part # Price Part # Price Part # Price Part # Price Part # Price Part # CP18 $2.56 H CP14 $2.56 H CP14S $3.25 H CP14SS CP38 $2.56 H CP38-80 $2.66 H BCPLG38 $4.03 H CP38S $3.95 H CP38SS CP12 $2.56 H CP12-80 $2.60 H BCPLG12 $4.03 H CP12S $3.30 H CP12SS CP34 $2.65 H CP34-80 $2.60 H BCPLG34 $4.03 H CP34S $3.90 H CP34FS $4.00 H CP34SS CP100-80 $3.11 H BCPLG100 $4.58 H CP100S $6.50 H CP100FS $6.95 H CP100SS CP114-80 $4.17 H BCPLG114 $6.17 H CP114S $9.55 H CP114FS $11.50 H CP114SS CP112-80 $6.96 H BCPLG112 $10.26 H CP112S $12.05 H CP112FS $15.00 H CP112SS CP200-80 $7.67 H BCPLG200 $11.71 H CP200S $14.50 H CP200FS $18.60 H CP200SS CP300-80 $21.93 H BCPLG300 $33.12 H CP300S $69.00 H CP300FS $97.00 H CP300SS

1-800-373-4084

Price $2.25 $2.25 $3.70 $5.35 $8.15 $12.90 $15.30 $22.00 $62.00

H H H H H H H H H

Fittings

Part # Price Part # Price Part # Price Part # Price Part # Price Part # Price RB1418 $1.11 H RB3818 $1.07 H RB3818-80 $1.60 H RB3814 $0.96 H RB3814-80 $1.60 H BRB3814 $2.64 H RB3814S $1.19 H RB3814SS $2.00 H RB1214 $1.06 H RB1214-80 $1.60 H BRB1214 $2.64 H RB1214S $2.00 H RB1214SS $2.00 H RB1238 $0.97 H RB1238-80 $1.60 H BRB1238 $2.64 H RB1238S $2.00 H RB1238FS $2.50 H RB1238SS $2.05 H RB3418 $1.07 H RB3418-80 $1.60 H BRB3418 $2.36 H RB3414 $1.19 H RB3414-80 $1.60 H BRB3414 $2.64 H RB3414FS $3.00 H RB3414SS $3.50 H RB3438 $1.19 H RB3438-80 $1.60 H BRB3438 $2.64 H RB3412 $1.18 H RB3412-80 $1.60 H BRB3412 $2.64 H RB3412S $2.79 H RB3412FS $3.00 H RB3412SS $3.50 H RB10014-80 $1.70 H BRB10014 $2.48 H RB10014S $6.95 H RB10012-80 $1.70 H BRB10012 $2.78 H RB10012S $4.25 H RB10012SS $5.25 H RB10034-80 $1.70 H BRB10034 $2.78 H RB10034S $4.25 H RB10034FS $4.90 H RB10034SS $5.25 H RB11434-80 $1.76 H BRB11434 $2.78 H RB11434FS $7.95 H RB11434SS $7.25 H RB114100-80 $1.76 H BRB114100 $2.78 H RB114100S $6.75 H RB114100FS $7.95 H RB114100SS $7.25 H RB11234-80 $2.48 H BRB11234 $3.69 H RB112100-80 $2.48 H BRB112100 $3.69 H RB112100S $8.40 H RB112100FS $9.15 H RB112100SS $9.80 H RB112114-80 $2.48 H BRB112114 $3.69 H RB112114S $6.60 H RB112114FS $9.15 H RB112114SS $13.25 H RB20034-80 $2.85 H BRB20034 $4.03 H RB200100-80 $2.85 H BRB200100 $4.03 H RB200100S $9.95 H RB200100FS $13.75 H RB200100SS $16.50 H RB200114-80 $2.85 H BRB200114 $4.03 H RB200114FS $13.70 H RB200112-80 $2.85 H BRB200112 $4.03 H RB200112S $8.75 H RB200112FS $13.70 H RB200112SS $16.50 H RB300112-80 $10.18 H BRB300112 $16.75 H RB300200 $8.57 H RB300200-80 $8.62 H BRB300200 $16.75 H RB300200S $18.50 H RB300200FS $67.00 H RB300200SS $39.00 H RB300212S $24.65 H BRB400300 $25.98 H

Fittings Street Elbows Polypropylene Std. Poly Sch 80 - Generic

Sch 80 Banjo Brand

Steel Sch 40

Sch 80

Stainless

Part # Price Part # Price Part # Price Part # Price Part # Price Part # SE14 $1.82 H SE14S $6.50 H SE14FS $13.50 H SE14SS SE14-45 $2.85 H SE38-80 $2.57 H BSE38 $3.69 H SE38S $4.90 H SE38SS SE12 $1.86 H SE12-80 $2.48 H BSE12 $3.69 H SE12S $5.10 H SE12SS SE34-80 $2.66 H BSE34 $3.94 H SE34S $4.90 H SE34FS $17.35 H SE34SS SE100-80 $3.11 H BSE100 $4.66 H SE100S $7.45 H SE100FS $23.50 H SE100SS SE114-80 $3.98 H BSE114 $5.83 H SE114S $10.70 H SE114FS $42.00 H SE114SS SE112-80 $6.11 H BSE112 $9.08 H SE112S $18.50 H SE112SS SE200-80 $7.37 H BSE200 $10.78 H SE200S $30.00 H SE200FS $73.00 H SE200SS SE300-80 $34.47 H BSE300 $54.88 H SE300S $89.00 H SE300SS

Price $2.60 H $3.00 $4.50 $7.00 $11.00 $17.00 $23.00 $35.00 $83.00

H H H H H H H H

Threaded Elbows Polypropylene

Fittings

Std. Poly Sch 80 - Generic

Sch 80 Banjo Brand

Steel Sch 40

Sch 80

Stainless

Part # Price Part # Price Part # Price Part # Price Part # Price Part # TE14 $2.43 H TE14S $3.25 H TE14SS TE38-80 $2.57 H BTE38 $3.89 H TE38S $3.50 H TE38SS TE12-80 $2.33 H BTE12 $3.52 H TE12S $2.35 H TE12FS $7.30 H TE12SS TE34-80 $2.66 H BTE34 $3.81 H TE34S $2.95 H TE34FS $9.15 H TE34SS TE100-80 $3.11 H BTE100 $4.50 H TE100S $5.30 H TE100FS $13.60 H TE100SS TE114-80 $3.85 H BTE114 $5.62 H TE114S $8.30 H TE114FS $26.00 H TE114SS TE112-80 $6.01 H BTE112 $8.81 H TE112S $11.00 H TE112FS $33.35 H TE112SS TE200-80 $7.20 H BTE200 $10.46 H TE200S $ 18.70 H TE200FS $41.00 H TE200SS TE300-80 $34.47 H BTE300 $53.21 H TE300S $61.00 H TE300HS $197.00 H TE300SS

Price $2.25 H $3.50 H $4.60 H $6.60 H $9.35 H $16.35 H $22.00 H $28.00 H $80.00 H

Plugs Polypropylene Std. Poly Sch 80 - Generic

Sch 80 Banjo Brand

Steel Sch 40

Sch 80

Stainless

Part # Price Part # Price Part # Price Part # Price Part # Price Part # Price PL18 $0.33 H Cored Solid PL18SS $1.50 H PL14 $0.35 H PL14SS $1.79 H PL38 $0.37 H PL38S $0.75 H PL38SS $1.95 H PL12 $0.42 H PL12-80 $1.60 H BPL12 $2.78 H PL12S $1.35 H PL12SS $2.50 H PL34 $0.45 H PL34-80 $1.60 H BPL34 $2.78 H PL34S $3.09 H PL34HS $2.00 H PL34SS $3.00 H PL100-80 $1.60 H BPL100 $2.78 H PL100S $2.79 H PL100HS $8.75 H PL100SS $4.15 H PL114-80 $1.76 H BPL114 $2.78 H PL114S $4.90 H PL114HS $10.50 H PL114SS $7.00 H PL112-80 $2.82 H BPL112 $4.45 H PL112S $4.85 H PL112HS $14.29 H PL112SS $8.50 H PL200-80 $2.97 H BPL200 $4.45 H PL200S $7.25 H PL200HS $18.40 H PL200SS $12.75 H PL300-80 $10.97 H BPL300 $17.54 H PL300S $17.50 H PL300HS $46.50 H PL300SS $28.00 H 足足

www.horvick.com

Fittings Threaded Tees Polypropylene Std. Poly

Steel

Sch 80 - Generic

Part # TT14

Price $2.92 H

TT12

$2.86 H

Part # TT38-80 TT12-80 TT34-80 TT100-80 TT114-80 TT112-80 TT200-80 TT300-80

Sch 80 Banjo Brand

Price $2.43 $2.79 $2.91 $4.05 $4.86 $7.05 $8.93 $39.17

H H H H H H H H

Polypropylene Sch 80-Generic Sch 80 Banjo Brand

Part # Price SE34-45-80 $4.10 H SE100-45-80 $5.99 H SE114-45-80 $7.43 H SE112-45-80 $7.94 H SE200-45-80 $9.39 H

Part# Price BSE34-45 $6.34 H BSE100-45 $9.29 H BSE114-45 $11.51 H BSE112-45 $12.28 H BSE200-45 $14.56 H BSE300-45 $60.28 H

BTT38 BTT12 BTT34 BTT100 BTT114 BTT112 BTT200 BTT300

Price $3.88 $4.09 $4.38 $6.32 $7.29 $10.46 $13.03 $62.10

H H H H H H H H

Part # TT14FS TT12FS TT34FS TT100FS TT114FS TT112FS TT200FS TT300FS

Stainless

Price Part # Price $10.85 H TT14SS $4.15 H TT38SS $4.50 H $10.50 H TT12SS $7.00 H $14.05 H TT34SS $11.00 H $18.50 H TT100SS $16.50 H $34.00 H TT114SS $26.00 H $42.00 H TT112SS $32.00 H $55.00 H TT200SS $51.00 H $344.00 H TT300SS $106.00 H

Crosses Polypropylene Sch 80 - Generic Sch 80 Banjo Brand

Part #

CR34-80 CR100-80 CR114-80 CR112-80 CR200-80

Price Part # BC14 BC38 BC12 $11.51 H BC34 $12.06 H BC100 $16.78 H BC114 $17.83 H BC112 $21.03 H BC200

Caps

Steel Sch 40

Price $11.47 H $12.59 H $17.88 H $17.88 H $17.88 H $26.66 H $26.66 H $32.63 H

Part #

Stainless

Price Part #

Price

CR12S CR34S CR100S

$15.35 H CR12SS $9.00 $18.60 H CR34SS $12.75 $17.50 H CR100SS $21.00 CR114SS $29.00 CR112S $36.00 H CR112SS $39.00 CR200S $58.00 H CR200SS $55.00 CR300S $150.00 H CR300SS $139.00

H H H H H H H

Unions

Polypropylene Sch 80–Generic Sch 80–Banjo Brand

Part #

Part # Price TT14S $4.95 H TT38S $4.90 H TT12S $2.95 H TT34S $4.75 H TT100S $8.30 H TT114S $13.00 H TT112S $15.85 H TT200S $27.00 H TT300S $84.00 H

Sch 80

Fittings

45º Street Elbows

Part #

Sch 40

Price Part #

CAP12-80 $3.20 CAP34-80 $3.20 CAP100-80 $3.20 CAP114-80 $3.81 CAP112-80 $5.17 CAP200-80 $5.80 CAP300-80 $19.59

H H H H H H H

BCAP12 BCAP34 BCAP100 BCAP114 BCAP112 BCAP200 BCAP300

Steel Stainless Steel

Price Part # C14SS C38SS $5.40 H C12SS $5.40 H C34SS $5.40 H C100SS $6.07 H C114SS $7.64 H C112SS $8.87 H C200SS $31.74 H C300SS

1-800-373-4084

Price $2.50 H $2.35 H $3.05 H $3.85 H $5.75 H $10.50 H $13.75 H $17.40 H $43.50 H

Steel Forged Steel

Part #

UN34FS UN100FS UN114FS UN112FS UN200FS

Stainless Steel

Price Part #

$15.85 $21.00 $33.00 $39.10 $53.00

H UN34SS H H H UN112SS H UN200SS

Price

$11.00 H $35.00 H $49.00 H

Fittings How to read the part number.

Close Nipples

Example:

Part # SE12

Size (in.) 1/2

Price 1.35

MPT FPT Polypropylene

Std. Poly

Sch 80 - Generic

Sch 80 - Banjo Brand

Steel Sch 40

Sch 80

Stainless

Part # Price Part # Price Part # Price Part # Price Part # Price Part # Price CN18 $0.37 H CN14 $0.37 H BCN14 $1.19 H CN14S $2.25 H CN14HS $9.05 H CN14SS $1.50 H CN38 $0.39 H CN38-80 $0.82 H BCN38 $1.19 H CN38S $2.35 H CN38HS $9.80 H CN38SS $1.80 H CN12 $0.43 H CN12-80 $0.91 H BCN12 $1.32 H CN12S $1.55 H CN12HS $5.00 H CN12SS $2.30 H CN12-3-80 $1.60 H BCN12-3 $2.52 H CN34 $0.59 H CN34-80 $1.45 H BCN34 $1.37 H CN34S $1.75 H CN34HS $5.65 H CN34SS $3.09 H CN34-4-80 $1.72 H BCN34-4 $2.64 H CN34-6-80 $2.10 H BCN34-6 $3.09 H CN100-80 $1.70 H BCN100 $1.96 H CN100S $2.75 H CN100HS $8.00 H CN100SS $4.10 H CN100-4-80 $1.84 H BCN100-4 $2.78 H CN100-6-80 $2.29 H BCN100-6 $3.47 H CN114-80 $1.76 H BCN114 $1.96 H CN114S $4.15 H CN114HS $10.00 H CN114SS $7.45 H CN114-4-80 $2.40 H BCN114-4 $3.47 H CN114-6-80 $2.66 H BCN114-6 $3.94 H CN112-80 $2.51 H BCN112 $3.61 H CN112S $5.15 H CN112HS $12.05 H CN112SS $8.00 H BCN112-3 $3.97 H CN112-4-80 $4.98 H BCN112-4 $7.41 H CN112-6-80 $5.93 H BCN112-6 $8.72 H CN200-80 $2.76 H BCN200 $4.09 H CN200S $7.00 H CN200HS $14.30 H CN200SS $11.00 H CN200-4-80 $5.86 H BCN200-4 $8.62 H CN200-6-80 $6.73 H BCN200-6 $10.06 H CN300-80 $9.36 H BCN300 $12.82 H CN300S $26.00 H CN300HS $60.00 H CN300SS $26.00 H BCN300-4 $19.26 H CN300-6-80 $14.19 H BCN300-6 $24.83 H CN400-80 $13.95 H BCN400 $19.95 H

Reducing Nipples & Couplers Fittings

Std. Poly

Reducing Nipples

Reducing Couplers

Sch 80 - Generic

Sch 80 - Banjo Brand Sch 80 - Generic Sch 80 - Banjo Brand

Steel

Part # Price Part # Price Part # Price Part # Price Part # Price Part # Price CN1418 $0.36 H BR1418S $5.75 H CN3818 $0.38 H CN3814 $0.38 H CN1214 $0.40 H CN1218 $0.43 H CN1238 $0.41 H CN1238-80 $1.26 H BRN1238 $2.00 H CN3438 $0.48 H CN3412 $0.51 H CN3412-80 $1.37 H BRN3412 $2.15 H BR3412S $3.90 H CN10012-80 $1.60 H BRN10012 $2.75 H CN10034-80 $1.60 H BRN10034 $2.52 H BR10034FS $10.00 H BRC10034 $5.96 H CN11434-80 $1.72 H BRN11434 $2.90 H CN114100-80 $1.81 H BRN114100 $2.64 H BR114100FS $18.00 H BR114100S $7.50 H CN112100-80 $2.48 H BRN112100 $3.12 H BRC112100 $10.12 H CN112114-80 $1.98 H BRN112114 $2.78 H BRC112114 $10.12 H BRC200100 $10.75 H BRN200114 $3.81 H BR200114FS $26.00 H BRC200114 $10.75 H CN200112-80 $2.22 H BRN200112 $3.10 H BRC200112 $10.75 H BR212200S $35.00 H CN3足足00200-80 $8.62 H BRN300200 $12.76 H BRC300200 $38.18 H

www.horvick.com

Fittings Barb Tee

Banjo Barb Tee 1

MPT x Barb Tee MPT

3 Barb1 Barb2 Barb3 (in.) (in.) (in.)

BT18 BT14 BT1438 BT1412 BT38 BT3812 BT1238 BT12 BT1234 BT3412 BT58 BT34 BT100 BT114 BT112 BT200

1/8 1/8 1/4 1/4 1/4 3/8 1/4 1/2 3/8 3/8 3/8 1/2 1/2 3/8 1/2 1/2 1/2 3/4 3/4 1/2 5/8 5/8 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2 2

Price

1/8 $0.60 1/4 $0.75 3/8 $0.75 1/2 $0.70 3/8 $0.70 1/2 $0.70 3/8 $0.74 1/2 $0.74 3/4 $0.92 1/2 $1.84 5/8 $0.86 3/4 $0.91 1 $1.22 1-1/4 $1.65 1-1/2 $2.18 2 $10.77

H H H H H H H H H H H H H H H H

Part # BBT3812 BBT3412 BBT1234 BBT34 BBT100

Barb1 Barb2 Barb3 (in.) (in.) (in.) 3/8 3/4 1/2 3/4 1

Y Fittings BY14 BY38 BY12 BY34 BY100

1/4 3/8 1/2 3/4 1

Price

1/2 1/2 3/4 3/4 1

$2.32 $2.32 $2.32 $2.32 $2.45

H H H H H

1/4 3/8 1/2 3/4 1

$2.31 $2.35 $2.36 $3.79 $4.05

H H H H H

GTT1214 GTT3414 GTT3418 GTT10014 GTT11414

Size (in.) 1/2 3/4 3/4 1 1 1/4

Part # BTM1814 BTM14 BTM1438 BTM1412 BTM3814 BTM38 BTM3812 BTM1238 BTM12 BTM34 BTM3412 BTM34100

Barb (in.) 1/4 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 3/4 1/2 1

Price $0.84 $0.77 $0.74 $0.78 $0.67 $0.77 $0.84 $0.85 $0.89 $1.37 $1.28 $1.46

3/4” FPT x 1-1/4” HB tee Part # BTF34114 ................ $2.67

NOTE! Sizing Threaded Fittings Pipe sizes need to be measured by pipe size scale—which is not the same as a ruler or tape measure scale.

1/4

1-1/2

3/4

3/8

Use the templates at the left to determine the size of the pipe you need— not your tape measure or ruler.

1 1/2

1-1/4

Pipe size in pipe scale inches

1-800-373-4084

H H H H H H H H H H H H

3/4” FPT x 3/4” HB tee Part # BTF34 ...................... $2.51

Price $3.71 H $4.15 H $4.33 H $9.46 H $11.51 H

Pressure Gauges Page 84

MPT (in.) 1/8 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 3/4 3/4 3/4

FPT x Barb Tee

Gauge Threaded Tee

Part #

Fittings

Part #

Fittings Polypropylene Cam Lever Couplings

Fittings

ITEM

Shims Handles Gaskets (EPDM)

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

050A $3.79 H

075A $3.79 H

100A $4.15 H

125A $4.30 H

150A $4.62 H

200A $5.48 H

300A $12.28 H

400A $20.19 H

050B $10.23 H

075B $10.23 H

100B $11.68 H

125B $13.62 H

150B $13.50 H

200B $15.94 H

300B $26.95 H

400B $53.46 H

050C $10.23 H

075C $10.23 H

100C $11.68 H

125C $13.62 H

150C $13.50 H

200C $15.94 H

300C $26.95 H

400C $53.46 H

050D $10.23 H

075D $10.23 H

100D $11.68 H

125D $13.62 H

150D $13.50 H

200D $15.94 H

300D $26.95 H

400D $53.46 H

050E $4.20 H

075E $4.20 H

100E $4.75 H

125E $4.79 H

150E $4.95 H

200E $6.36 H

300E $15.66 H

400E $20.19 H

050F $4.20 H

075F $4.20 H

100F $4.75 H

125F $4.79 H

150F $4.95 H

200F $6.36 H

300F $15.66 H

400F $20.19 H

075DC $9.89 H

100DC $11.33 H

125DC $12.70 H

150DC $13.50 H

200DC $15.94 H

300DC $26.95 H

400DC $38.90 H

075DP $3.79 H

100DP $4.15 H

125DP $4.16 H

150DP $4.58 H

200DP $6.18 H

300DP $12.28 H

400DP $16.05 H

—

150LA $7.65 H

200LA $8.07 H

—

150LC $16.17 H

200LC $19.17 H

—

150LD $16.17 H

200LD $19.17 H

—

150LF $8.84 H

200LF $9.12 H

—

075S $0.42 H 075H $2.01 H 075G $0.60 H

100S $0.42 H 100H $2.21 H 100G $0.60 H

150S $0.72 H 200H $3.48 H 100G $0.60 H

150S $0.72 H 200H $3.48 H 150G $0.90 H

200S $0.92 H 200H $3.48 H 200G $1.04 H

300S $1.59 H 300H $5.92 H 300G $1.24 H

400G $3.52 H

Also available in aluminum, iron, brass, and stainless steel.

www.horvick.com

Fittings Polypropylene Cam Lever Couplings

ITEM

Size and Part Number 3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

B-075A B-100A B-125A B-150A B-200A B-300A B-400A $5.22 H $5.22 H $5.22 H $5.93 H $6.99 H $16.89 H $25.76 H

B-075B B-100B B-125B B-150B B-200B B-300B B-400B $11.94 H $13.72 H $13.72 H $16.08 H $19.58 H $32.91 H $65.22 H

B-200C B-075C B-100C B-125C B-150C $19.58 H B-300C B-400C $11.94 H $13.72 H $13.72 H $16.08 H B-200150C $32.91 H $65.22 H $15.74 H B-075D B-100D B-125D B-150D B-200D B-300D B-400D $11.94 H $13.72 H $13.72 H $16.08 H $19.58 H $32.91 H $65.22 H

B-075E B-100E B-125E B-150E B-200E B-300E B-400E $5.64 H $6.26 H $6.26 H $6.28 H $8.25 H $21.64 H $25.76 H

B-075F B-100F B-125F B-150F B-200F B-300F B-400F $5.64 H $6.26 H $6.26 H $6.28 H $8.25 H $21.64 H $25.76 H

B-075DC B-100DC B-125DC B-150DC B-200DC B-300DC B-400DC $11.94 H $13.17 H $12.26 H $16.08 H $19.58 H $32.91 H $47.57 H

B-075DP B-100DP B-125DP B-150DP B-200DP B-300DP B-400DP $5.64 H $5.43 H $4.85 H $6.07 H $8.19 H $17.16 H $20.25 H

Couplings also available in stainless steel ITEM

1 1/2”

Adapters/Couplings 2”

2”

B-150LA B-200LA $9.35 H $10.67 H

B-150LC B-200LC $19.26 H $23.89 H

B-150LD B-200LD $19.26 H $23.89 H

B-150LF B-200LF $11.21 H $12.02 H

3”

Extended Thread B-201B B-303B200A $19.58 H $58.77 H

B-200FF B-300F200F $21.53 H $43.10 H

B-200F45 B-300FF $18.83 H $43.10 H

Extended Thread B-200LB B-303B $23.89 H $42.22 H

Accessories / Parts ITEM Shims Handles Cam Handle Pin (S.S.) Gaskets (EPDM) (Extra thick available)

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

075S 100S 100S 150S 200S 300S — $0.42 H $0.42 H $0.42 H $0.72 H $0.92 H $1.59 H — B-075H B-100H B-100H B-150H B-150H B-300H — $3.61 H $3.40 H $3.40 H $4.44 H $4.44 H $6.28 H — — — — B-150P B-150P B-300P B-300P — — — $1.00 H $1.00 H $1.97 H $1.97 H B-075G B-100G B-100G B-150G B-200G B-300G B-400G $0.94 H $0.94 H $0.94 H $1.00 H $1.06 H $1.45 H $3.40 H

1-800-373-4084

Fittings

Manifold Fittings Manifold CLAMPS & GASKETS Part # FC100 FC200 FC220 FC300 M101G M100GV M201G M221G M301G

Description 100 Series Worm Screw Clamp 200 Series Std. Port Worm Screw Clamp 220 Series Full Port Worm Screw Clamp 300 Series Worm Screw Clamp 100 Series EPDM Gasket – Ribbed 100 Series FKM (viton type) Gasket 200 Series EPDM Gasket - Ribbed 220 Series EPDM Gasket - Ribbed 300 Series EPDM Gasket - Ribbed

Price $9.90 H $11.41 H $12.52 H $17.26 H $1.73 H $5.54 H $1.85 H $2.01 H $2.18 H

Manifold FITTINGS All Banjo Manifold Fittings Feature n Positive seals n Quick and easy assembly n Easy on/off hose connections n 360° orientation n 2” fittings pressure to 150 PSI at 70° n 3” fittings pressure to 125 PSI at 70° n 45° Also Available

Fittings

More sizes available!

Part # M100075BRB90 M100BRB90 M100125BRB90 M200100BRB90 M200125BRB90 M200150BRB90 M200BRB90 M220150BRB90 M220BRB90 M300220BRB90 M300BRB90

Description 1” Flange x 3/4” Hose Barb 90° Elbow 1” Flange x 1” Hose Barb 90° Elbow 1” Flange x 1-1/4” Hose Barb 90° Elbow 2” Std. Port Flange x 1” Hose Barb 90° Elbow 2” Std. Port Flange x 1-1/4” Hose Barb 90° Elbow 2” Std. Port Flange x 1-1/2” Hose Barb 90° Elbow 2” Std. Port Flange x 2” Hose Barb 90° Elbow 2” Full Port Flange x 1/2” Hose Barb 90° Elbow 2” Full Port Flange x 2” Hose Barb 90° Elbow 3” Flange x 2” Hose Barb 90° Elbow 3” Flange x 3” Hose Barb 90° Elbow

Price $2.20 H $2.20 H $2.20 H $9.02 H $9.02 H $9.02 H $9.02 H $9.02 H $9.02 H $14.89 H $39.83 H

Part # M100075BRB M100BRB M100125BRB M200100BRB M200125BRB M200150BRB M200BRB M220150BRB M220BRB M300220BRB M300BRB

Description 1” Flange x 3/4” Hose Barb 1” Flange x 1” Hose Barb 1” Flange x 1-1/4” Hose Barb 2” Std. Port Flange x 1” Hose Barb 2” Std. Port Flange x 1-1/4” Hose Barb 2” Std. Port Flange x 1-1/2” Hose Barb 2” Std. Port Flange x 2” Hose Barb 2” Full Port Flange x 11/2” Hose Barb 2” Full Port Flange x 2” Hose Barb 3” Flange x 2” Hose Barb 3” Flange x 3” Hose Barb

Price $1.81 H $1.81 H $1.81 H $4.87 H $5.54 H $4.87 H $4.87 H $4.87 H $4.87 H $14.98 H $14.89 H

# M100CPG90 M200CPG90 M200CPG90SH M220CPG90 M300CPG90

Description 1” x 1” Flange 90° 2” x 2” Std. Port Flange 90° 2” x 2” Std. Port Flange 90° Short 2” x 2” Full Port Flange 3” x 3” Flange 90°

Price $6.80 H $11.37 H $11.37 H $11.37 H $54.05 H

Part # M100CPG45 M200CPG45 M220CPG45 M300CPG45

Description l” x 1” Flange 45° 2” x 2” Std. Port Flange 45° 2” x 2” Full Port Flange 45° 3” x 3” Full Port Flange 45°

Price $10.10 H $13.12 H $15.80 H $64.64 H

Part # M300YG45

Description 3” x 3” x 3” 45° Full Port “Y” Flange

Price $121.86 H

“Banjo Manifold Sweep Elbows” on page 76

www.horvick.com

Manifold Fittings ®

More sizes available!

1-800-373-4084

Description 1” Flange x 3/4” Male Thread 1” Flange x 1” Male Thread 1” F lange x 1-1/4” Male Thread 2” Std. Port Flange x 1-1/4” Male Thread 2” Std. Port Flange x 1-1/2” Male Thread 2” Std. Port Flange x 2” Male Thread 2” Full Port Flange x 2” Male Thread 3” Flange x 3” Male Thread

Price $2.09 H $2.09 H $2.09 H $4.30 H $4.30 H $4.30 H $4.30 H $13.16 H

Part # M200100CPG M220200CPG M300200CPG M300220CPG

Description 2” Std Port x 1” Reducer Flange 2” Full Port x 2” Std Port Reducer Flange 3” x 2” Std. Port Reducer Flange 3” x 2” Full Port Reducer Flange

Price $14.56 H $14.56 H $33.97 H $33.97 H

Part # M100TEE M101TEE M200100TEE M200TEE M220TEE M300TEE

Description 1” Flanged Tee 1” Flanged Tee - Long 2” x 2” Std Port x 1” Flanged Tee 2” Std Port Flanged Tee 2” Full Port Flanged Tee 3” Flanged Tee

Price $6.25 H $6.25 H $12.61 H $13.16 H $13.16 H $62.03 H

Part # M100050FPT M100075FPT M100FPT M200FPT M220FPT M300FPT

Description 1” Flange x 1/2” Pipe Thread 1” Flange x 3/4” Pipe Thread 1” Flange x 1” Pipe Thread 2” Std. Port Flange x 2” Pipe Thread 2” FP x 2” FPT 3” Std. Port Flange x 3” Pipe Thread

Price $2.09 H $2.09 H $2.09 H $12.48 H $22.12 H $35.62 H

Part # M100A M200A M220A M300A

Description 1” Male Adapter 2” Male Adapter 2” Male Adapter 3” Male Adapter

Price $5.93 H $7.92 H $8.72 H $18.57 H

Part # M100CPG M200CPG M220CPG6 M220CPG M300CPG

Description 1” x 1” Flange 2” x 2” Std. Port Flange 2” FP Flange X 6” 2” x 2” Full Port Flange 3” x 3” Flange

Price $4.87 H $12.82 H $18.40 H $14.41 H $16.98 H

Part # MSW220

Description 2” Full Port Manifold Flange Swivel

Price $36.45 H

Part # M100CR M200CR M220CR M300CR

Description 1” Flanged Cross 2” Std Port Flanged Cross 2” Full Port Flanged Cross 3” Flanged Cross

Price $18.35 H $32.91 H $32.91 H $72.79 H

Part # M100PLG M200PLG M220PLG M300PLG M100PLG025 M200PLG018 M200PLG025 M200PLG038 M200PLG050 M200PLG075 M200PLG100 M220PLG075 M300PLG100

Description 1” Flange Plug 2” Std Port Flange Plug 2” Full Port Flange Plug 3” Flange Plug 1” Flange Plug with l/4” FPT 2” Std Port Flange Plug with 1/8’’ FPT 2” Std Port Flange Plug with 1/4’’ FPT 2” Std Port Flange Plug with 3/8” FPT 2” Std Port Flange Plug with 1/2” FPT 2” Std Port Flange Ping with 3/4” FPT 2” Std Port Flange Plug with 1” FPT 2” FP Flange Plug with 1” FPT 3” Flange Plug with 1” FPT

Price $2.09 H $4.30 H $5.46 H $14.56 H $11.08 H $13.03 H $13.03 H $13.03 H $13.03 H $13.03 H $13.03 H $21.83 H $24.27 H

x x x x

1” 2” 2” 3”

Full Port Flange Std. Port Flange Full Port Flange Full Port Flange

Fittings

w/gauge port

Part # M100075MPT M100MPT M100125MPT M200125MPT M200150MPT M200MPT M220MPT M300MPT

Manifold Fittings Banjo Manifold Sweep Elbows

Male Adapter

Sweeps Designed For A Better Flow

Male NPT

Male Adapter

Male NPT

Flange

3” Sweeps with 1/2” Gauge Port Hose Shank

Flange

Part # M300ASWPG90 M300MPTSWPG90 M300SWPG90

Description Price 3” Flange x Male Adptr Sweep w/gp $66.24 H 3” Flange x Male NPT Sweep w/gp $66.24 H 3” Flange x Flange Sweep w/gp $66.24 H

2” Sweeps Part # M200SWP90 M220200SWP90 M220ASWP90 M220BRBSWP90 M220MPTSWP90 M220SWP90

Description 2” Flange x Flange Sweep 2” FP Flange x Flange Sweep 2” FP Flange x Male Adapter Sweep 2” FP Flange x Hose Shank Sweep 2” FP Flange x Male NPT Sweep 2” FP Flange x Flange Sweep

Price $14.21 H $15.35 H $14.44 H $34.07 H $14.44 H $14.44 H

Description 3” Flange x Male Adapter Sweep 3” Flange x Male NPT Sweep 3” Flange x Flange Sweep

n Strong positive connection Price n 316 stainless steel $66.24 H construction $66.24 H $66.24 H n Teflon coated S.S. nut

3” Sweeps Part # M300ASWP90 M300MPTSWP90 M300SWP90

3” Full Port Flanged Poly Check Valve

Part # MCV300

Bolted Flange Clamps n Strong positive connection n 316 stainless steel construction n Teflon coated S.S. nut Part # FC220B 2” Clamp

$43.50 H

$42.49 H

Part # FC300B 3” Clamp

$48.50 H

Fittings

Pipe Sealers n Recommended procedure for sealing pipe threads: n We Do Not recommend using pipe tape. Pipe tape enlarges the outside diameter of the male thread and may cause the female thread to split.

We recommend using a pipe thread sealant. Use on

clean tapered threads. Apply a thick even coat on male threads using brush applicator. For pipe diameters smaller than 1¼” apply to male threads only. For 1¼” and larger sizes apply to both male and female threads. Avoid applying excessive amounts. Hand tighten joints and then torque another ½ to ¾ turn until threads seal.

Part # RectorSeal® No. 21™: This

is a slow drying, soft set multipurpose sealant designed for use where black is preferred. Conforms to TT-S-1732.

RectorSeal® Tru-Blu™: This

is a fast drying, flexible set thread sealant designed for high vibration environments. Teflon®* has been added to enhance thread lubrication during assembly and break out. Conforms to TT-S-1732.

T-TUBE T-SEAL T-TAPE RECTOR RECTOR 567-47 213-48 RECTOR RECTOR RECTOR

Item

Size

Teflon Pipe Sealant Teflon Pipe Sealant Teflon Pipe Sealant SEAL-5-T Use for NH3 threads SEAL-5 Use for NH3 threads SS Thread Sealant SS Thread Primer SEAL-7 Black, med. Drying SEAL-21 Black, Slow Drying SEAL-TB “True Blue” w/ Teflon RECTOR SEAL“True Blue” w/ TB-T Teflon tube

Price

2 Oz. Tube $3.99V 1/2 Pint $13.80 1/2” x 520” $0.99 1.75 oz. Tube $4.50 1 pint $22.75 1.7 oz. tube $26.00 4.5 oz. $31.00 16 oz. $58.25 8 oz. $16.25 8 oz. $13.25 1.75 oz.

V V H V V V V V V V

$3.50 V

www.horvick.com

Garden Fittings & Sealers Quick Connect

Garden Hose Adapter

Male Garden

Part # GHTF14 GHTM38 GHTM12 GHTF12 GHTM34 GHTF34 J34 J3412

Size (in.) MGH x 1/4 FPT MGH x 3/8 MPT MGH x 1/2 MPT MGH x 1/2 FPT MGH x 3/4 MPT MGH x 5/8 FPT FGH x 3/4” MPT FGH x 1/2” FPT

Price $1.71 H $0.57 H $0.57 H $1.72 H $0.57 H $1.71 H $1.71 H $1.71 H

Female Garden These quick connect couplers are 3/4” garden hose thread and have temperature resistant nitrile seals

Male Garden Hose Part #

Male half (single) Part # VP1163-61-CS

Female half (single) Part # VP1163-60-CS

Gaskets-pack of 6 Part # VP6-4730001-CS

$9.89 V $6.69 V

Price

$3.58 V $5.00 V

Garden Hose Fittings

Camlock Garden Hose Fittings

Fittings

Part # Description GHC Cap GHG Gasket GHN34 Swivel Nut GHS12 Hose shank GHS12S Hose shank, steel GHS14 Hose shank GHS34 Hose shank GHS34S Hose shank, steel GHS38 Hose shank GHS58 Hose shank

Size (in.) Price — $0.54 H — $0.11 H 3/4 $0.46 H 1/2 $0.39 H 1/2 $6.73 H 1/4 $0.36 H 3/4 $0.40 H 3/4 $8.10 H 3/8 $0.38 H 5/8 $0.40 H

Drum Valves 3/4” Drum Valve Part # 1150

$3.99 H Part #

Description

GHFT075A GHMT075B GHFT075D GHMT075F GHFT075MPT GHMT075FPT GHMT075MPT

¾” ¾” ¾” ¾” ¾” ¾” ¾”

H H H H H

Price

Adapter x ¾” GH Female $5.64 Coupler x ¾” GH Male $11.94 Coupler x ¾” GH Female $11.94 Adapter x ¾” GH Male $5.64 Male NPT x ¾” GH Female $2.64 Female NPT x ¾” GH Male $2.64 Male NPT x ¾” GH Male Thread $5.64

1-800-373-4084

H H H H H H H

2” Drum Valve Part # DV200

$21.00 H

Fittings

Male/female complete Part # VP1163-CS

Size (in.)

GHTF14 1/4 $1.71 G3438 3/8 $0.55 G3412 1/2 $0.55 G3458 5/8 $0.56 G3434 3/4 $0.56

Ball Valves Single Union Ball Valve Made of corrosion-resistant polypropylene, this single union ball valve is rated at 150 PSI. Ball seats are teflon, with EPDM O-rings. This feature provides low-torque valve actuation with no leaks. On/off actuation is 90°. Full port opening.

Single Union Ball Valve Part # Size (in.) Price UV12 1/2 $11.91 H UV34 3/4 $12.95 H UV100 1 $16.54 H UV100-45 1-45° $17.23 H UV114 1 -1/4 $27.57 H UV112 1 -1/2 $33.64 H UV200 2 $43.14 H UV300 3 $127.70 H

Replacement Parts Viton O-ring repair kits*

Handle

Part # Size (in.) Price 60437 1/2 $3.36 H 60438 3/4 $5.38 H 60439 1 $6.51 H 60440 1-1/4 $7.29 H 60441 1-1/2 $8.07 H 60442 2 $11.97 H 60443 3 $32.90 H

Part # Size (in.) Price 60444 1/2 $1.78 H 60445 3/4 $2.28 H 60446 1 $3.13 H 60447 1-1/4 $3.35 H 60448 1-1/2 $3.90 H 60449 2 $5.87 H 60450 3 $14.77 H

* Kit includes two body o-rings

Multi-Port Ball Valve

Three-position setting permits selecting from two different lines or complete shut off. Ball seats are teflon, with EPDM O-rings. This feature provides low-torque valve actuation with no leaks. Made of corrosion-resistant polypropylene. This multi-port ball valve is rated at 150 PSI. 3/4” valve Part # UV34MP.................. $37.79 H 2” valve Part # UV200MP................ $53.49

Replacement Parts Part # 61733 60435 61735 61736

Description Size (in.) EPDM O-ring repair kit 3/4 EPDM O-ring repair kit 2 Handle 3/4 Handle 2

Price $7.53 H $8.38 H $2.99 H $7.90 H

Polypropylene Bolted Ball Valves

2” Full Port MxM Coupler Part # 62288

2” Full Port FxM Coupler Part # 62314

2” Full Port MxF Part # 62286

2” Full Port FxF Part # 62287

$47.06 H

Valves

$47.06 H

www.horvick.com

Ball Valves Norwesco 4-Bolt Ball Valve

Banjo 4-Bolt Ball Valve Part # Size (in.) Price V-050 1/2” $39.68 H V-075 3/4” $39.68 H V-100 1” $39.68 H V-100FP 1” $43.75 H V-125 1-1/4” $43.75 H V-125FP 1-1/4” $56.24 H V-150 1-1/2” $56.24 H V-200 2” $56.24 H

Part # Size (in.) Price HV12 1/2” $28.26 H HV34 3/4” $28.26 H HV100 1” $28.26 H HV100FP 1” $32.94 H HV114 1-1/4” $32.94 H HV114FP 1-1/4” $42.09 H HV112FP 1-1/2” $42.09 H HV200 2” $40.87 H

Banjo 6-Bolt Ball Valves Norwesco 6-Bolt Ball Valve

Part # Size (in.) Price V-200FP 2” $79.20 H V-300 3” $127.49 H V-300FP 3” $189.26 H V-400 4” (3.5” port) $413.65 H

Part # Size (in.) Price HV200FP 2” full port $59.69 H HV200MF 2” full port MxF $40.87 H HV200FPMF 2” full port MxF $62.54 H HV300 3” full port $143.89 H HV300MF 3” MxF $130.64 H HV400 4” full port $303.42 H

2” Male Adapter x 2” Male NPT Part # VFMT-200FP............. $92.09

Norwesco Nozzle Part # Size (in.) Price HV112N 1-1/2” $57.57 H HV200N 2” $59.32 H HV200FPN 2” FP $83.12 H

Straight

90°

Part # V-10270 V-10271 V-25270 V-25271

Desc. Straight 90° Straight 90°

Fits Price V100FP, V125 $8.95 H V100FP, V125 $8.95 H V150, V200 $14.95 H V150, V200 $17.63 H

Banjo Nozzle Part # Size (in.) Price VA-150 1-1/2” $67.71 H VA-200 2” $67.71 H VA-200FP 2” $101.29 H

Stainless Full-Port Locking Valves Valves have stainless steel ball, handle, and stem Part # VSFMT-204HSFP VSFMT-300HSFP MVS220HSFP MVSF220HSFP MVSF300HSFP MVSMT300HSFP MVS300HSFP

1-800-373-4084

Description 2”FP Male NPT x 2” Male Adapter 3”FP Male NPT x 3” Male Adapter 220x220 Flanged 220 Flange by Male Adapter 300 Flange x Male Adapter 3” Flange x 3” FP NPT 300x300 flange

Price $196.22 H $367.71 H $196.22 H $XXX $367.71 H $367.71 H $367.71 H

Valves

Banjo Mounting Bracket

Ball Valves Single Union Ball Valve

3-Way Poly Ball Valve

Maximum Pressure is 100 PSI.

Maximum Pressure is 100 PSI. ®

BUV

A quality ball valve at an economical price. The single union valve is constructed of all polypropylene, has teflon seats, and EPDM O-rings to provide excellent resistance to most ag chemicals.

Side Load

Bottom Load Part # Size (in.) Ports (in.) Price V-075-SL 3/4” 1” $57.29 V-100-SL 1” 1” $57.29 V-125-SL 1-1/4” 1-1/4” $74.09 V-150-SL 1-1/2” 1-1/2” $74.09 V-200-SL 2” 2” $113.06

UVA Part # Size (in.) BUV-050 1/2” BUV-075 3/4” BUV-100 1” BUV-125 1-1/4” BUV-150 1-1/2” BUV-200 2” UVA-100FP 1”

Price $19.88 H $19.88 H $24.84 H $42.67 H $42.39 H $53.80 H $39.72 H

NOTE:For Bottom Load Valve, substitute BL instead of SL, at same price

H H H H H

Polypropylene Bolted Ball Valves Series 200 = 1-1/2” port Series 300 = 2-1/2” port

Flanged Manifold Valves

Series 204 = 2”port

Featuring 2” port and 2” ends. 2” Standard Port Flange x 2” Male Adapter Valve Part # VSF-200CF ®

$61.91 H

VSF

VSMT

2” Full Port Flange x 2” Female Thread Stubby Ball Valve Part # MVS220FP

Valves

$74.74 H

VSFMT

2” Full Port Flange x 2” Male Adapter Stubby Ball Valve Part # MVSF220FP

$74.74 H Standard and Full Port Flange Ball Valve Part # MV100CF MV200CF MV220CF MVS220CF MV300 MV300CF

Description Price 1”x 1” Flange Ball Valve $43.75 H 2”x 2” Std. Port Flange Ball Valve $61.91 H 2”x 2” Full Port Flange Ball Valve $82.52 H 2”x 2” Full Port Flg x Flg Stubby Valve $74.74 H 3”x 3” Std. Port Flange Ball Valve $135.47 H 3”x 3” Full Port Flange Ball Valve $196.35 H

Part # VSF-200 VSF-204FP VSF-300

MVS

Description Male Adapter x Female NPT Male Adapter x Female NPT Male Adapter x Female NPT

Price $61.91 H $74.74 H $152.77 H

VSMT-200 Male NPT x Female NPT VSMT-204FP Male NPT x Female NPT VSMT-300 Male NPT x Female NPT

$61.91 H $74.74 H $159.09 H

VSFMT-200 Male VSFMT-204FP Male VSFMT-300 Male VSFMT-300FP Male

$65.88 $74.74 $152.77 $193.42

Adapter Adapter Adapter Adapter

x x x x

Male NPT Male NPT Male NPT 3” Male NPT

H H H H

MVS300CF 3” Flange x 3” Flange (Stubby) MVS300CFFP 3” Flange x 3” Flange (Stubby)

$152.77 H $186.88 H

MVSF300FP

$191.26 H

3” Male Flange x 3” Male Adapter (not shown)

www.horvick.com

Valves Brass Ball Valve The stem, ball, and body of this valve are chromed for corrosion resistance. Valve comes with either a butterfly or lever handle and is rated at 300 PSI. Seats are teflon and seals viton. Use for compressed air, pressure washer inlet ports, gaseous fuel, and a host of other applications.

1/2” shown

Part # 90-FF-14 90-FM-14 90-FF-38 90-FM-38 90-FF-12 90-FM-12 91-FF-34* 91-FF-100* BBV38* BBV12*

Size (in.) 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1 3/8 1/2

Poly Ball Valve

Inlet x Outlet FNPT x FNPT FNPT x MNPT FNPT x FNPT FNPT x MNPT FNPT x FNPT FNPT x MNPT FNPT x FNPT FNPT x FNPT FNPT x FNPT FNPT x FNPT

PSI 300 300 300 300 300 300 600 600 600 600

Price $6.50 H $6.50 H $6.50 H $6.50 H $7.95 H $7.95 H $14.00 H $22.00 H $7.00 H $10.00 H

* all brass bodies

These poly ball valves come with either Viton or Buna seals for chemical resistance and are rated up to a maximum operating pressure of 125 PSI. Part # PV18-FF-V PV38-B-B PV38-B-E PV38-B-V PV12-B-E PV12-B-V

These stainless steel ball valves feature a locking handle and the ball, stem, and body are 316 stainless steel. Seats are glass-reinforced teflon. The valves are full port and rated at 1000 PSI. Ends are NPT female. n Repair kits kits are available.

Replacement lever handle Part # 90-LEVER

$1.50 H

Pressure Relief & Control Valves

Part # SSV038 SSV050 SSV075 SSV100 SSV125 SSV150 SSV200 SSV300

100% factory tested

Size (in.) 3/8 1/2 3/4 1 1 -1/4 1 -1/2 2 3

Price $24.50 H $27.00 H $32.50 H $49.50 H $72.00 H $98.00 H $149.00 H $422.00 H

Control desired pressure setting with positive displacement pumps in spray lines to assure more uniform rates of chemical application. The selected pressure setting is firmly held in place by lockout.

Polypropylene Model 23120

Poly/Aluminum Model 8460

Aluminum Model 17L Tee Valve

150 PSI 3/4” 64 GPM 1/2” 43 GPM

300 PSI up to 70 GPM

with 3/4” ports up to 300 PSI

3/4” polypropylene Part # 23120-PP-34

$67.43 H

$36.72 H

1/2” polypropylene Part # 23120-PP-12

$36.72 H

1/2” Poly Body/Alum. top Part # 8460-12 3/4” Poly Body/ Alum. top Part # 8460-34

$67.43 H

Repair Kit Part # AB8460-KIT

$24.33 H

1-800-373-4084

For selective control of 3-section boom sprayers. Aluminum construction with stainless steel and plastic internal parts for maximum corrosion resistance. Part # 17L

$137.76 H

Repair Kit Part # AB17-KIT

$38.23 H

Valves

$1.50 H

Price $15.75 H $14.25 H $14.95 H $14.95 H $13.95 H $13.95 H

Stainless Steel Ball Valve

Replacement handles Replacement butterfly handle Part # 90-HANDLE

Description 1/8” FPT X 1/8” FPT w/viton seals 3/8” hose barbs w/ buna seals 3/8” hose barbs w/ EPDM seals 3/8” hose barbs w/ viton seals 1/2” hose barbs w/ EPDM seals 1/2” hose barbs w/ viton seals

Electrically Operated Valves Model 144A Electric Valve These valves come in sets containing one, two, or three units. nnStainless steel wetted parts provide additional corrosion resistance nnOperate on 12vdc nnEPDM diaphragms and seat washers, Viton optional

1/2” NPT outlet (spray line)

3/4” NPT inlet

Continuous

Outlet Inlet PSI GPM Part # (in.) (in.) (max.) (max.) Price 144A-1 1/2 3/4 100 10 $164.94 H 144A-2 1/2 3/4 100 10 $334.14 H 144A-3 1/2 3/4 100 10 $503.38 H 145H-1 1 1 100 15 $377.66 H

Valve Repair Kits nnKit includes: nn1-spring, stainless steel nn2-diaphragms, EPDM Valve Repair Kit Kit Price nn1-boot, EPDM 144A-1 AB144A-1-KIT $29.61 H (some kits)

2100B 12-volt DC Solenoid Valve nn3/4” NPT female inlet, 3/4” NPT male bypass outlet nn1/2” NPT female boom line outlet. nn125 PSI max — 5 PSI drop at 10 GPM. nnEpoxy encapsulated coil nnViton seals and “O” rings. Aflas is optional. nn 430 stainless steel and chemical resistant glass filled nylon body. nn12-Volt DC — 2.4 amps

Solenoid Shutoff Valve, Single Part # 2100B-1V

$134.20 H

Series 2201A Solenoid Valves nn1/4” NPT female inlet and outlet. nnThe valve housing is made of glass filled nylon—304/430 stainless steel wetted parts. nnViton seals and “O” Rings nnEpoxy encapsulated coil nn.148 Diameter Orifice nn.45 CV Rating nn1 GPM (3.75 LPM) Solenoid Valve Part # 2201A nn125 PSI (860 kPa) $87.98 H nn12-Volt DC — 1.1 Amp

145H-1 AB145H-KIT $53.35 H

2204A 3-Way Solenoid Valve

Model 1999A Solenoid Shut-Off Valve

nn1/4” NPT female inlet and two 1/4” NPT female outlets. nnThe valve housing is made of glass filled nylon—304/430 stainless steel wetted parts. nnViton seals and “O” rings. nnEpoxy encapsulated coil. nn.105 Diameter Orifice nn.22 CV Rating nn1/2 GPM (1.9 LPM) nn55 PSI (380 kPa) nn12-Volt DC — .85 Amp

Valves

nn12 vdc operation nn1” NPT female inlet, 1” NPT male outlet nn3/4” NPT female boom line nn18 GPM at 175 PSI (max.) nnAflas or Viton available Viton Shut-Off Valve Part # 1999A-1

$151.20 H

AFLAS Shut-Off Valve Part # 1999A-1-A

ChemSaver Solenoid Valve

Repair Parts

nnNormally closed nn12-Volt DC — .75 Amp nnMax 100 PSI spraying pressure nn0.6 GPM at 5 PSI drop nn0.8 GPM at 10 PSI drop nnWettable parts are stainless steel or viton.

$154.14 H Part # 1974 2109 2613 2515 2045

Description Viton Diaph. Assb. (Stand) AFLAS Diaph. Assb. (Opt.) 3-1/8” OAH—Coil Assembly(1999) 2-3/4” OAH—Coil Assembly(1999A-1) Repair Kit (parts 2)

Price $39.59 H $55.48 H $77.35 H $70.68 H $69.20 H

3-way Valve Part # 2204A

$87.98 H

Nozzle Body Valve Part # 55280

www.horvick.com

Electrically Operated Valves BANJO Electric Ball Valves

Boom Valve

Available in 3/4” 1”, 1-1/4” 1-1/2”, 2” std. port and 2” full port threaded or flanged outlets. ®

n 316 Stainless-steel ball and stem n Stainless-steel hardware n Viton o-rings n 12 VDC n 150 PSI rated n Open/close indicator n 3-way valves also available Size 3/4” 1” full port 1-1/4” 1-1/2” 2” 2” full port 1” 2” 2” full port

Inlet/Outlet Threaded Threaded Threaded Threaded Threaded Threaded Flanged Flanged Flanged

Part # EV075 EV100FP EV125 EV150 EV200 EV204FP MEV100CF MEV200CF MEV220CF

Price $464.27 H $464.27 H $464.27 H $680.57 H $608.01 H $718.37 H $464.27 H $680.57 H $718.37 H

Replacement Motor Size 3/4”, 1”, 1-1/4” 1-1/2”, 2”

Price $305.18 H $417.90 H

Repair Kits Part # EV10210 EV20210 EV25210

Size 3/4”, 1”, 1-1/4” 1-1/2”, 2” 2” Full Port

Price $76.94 H $86.40 H $98.56 H

344 B Series Electric Ball Valves

Size 3/4” 1” 3/4” 1”

Type 2 way 2 way 3 way 3 way

$245.00 M

Triple Valve Assembly Part # 063-0171-928

$731.00 M

Accessories Repair Kit Part # 117-0159-780

$20.91 M

Replacement Motor Part # 063-0172-330

Wire Harness Kit (3 valves) Adapts spade terminals to multipack Part # 14424

$65.00 V

$203.00 M

Flanged Fittings– see pages 74 & 75

Wire Harness Diagram Pin A Red Pin B White Pin C Black

12vdc Ground 12vdc signal for open valve

Model 344BR-24-01C Electric Regulating Control Ball Valve

n 300 PSI n Quick-release motor head n All metal gears n Automatic re-settable use n Also available in flanged ends Part # 344BEC-23-C 344BEC-24-C 344BEC-33-C 344BEC-34-C

Single Valve Part # 063-0171-926

n 1” FNPT connections n 12 vdc operation n 14 sec time n single outlet

Price $326.59 H $326.59 H $399.68 H $399.68 H

Part # 344BR-24-01C

$335.63 H

Replacement Motor Part # Size 50515-22CP05 22RPM Replacement Motor 50515-25CP05 25RPM Replacement Motor

1-800-373-4084

Price $276.65 H $276.65 H

Valves

Part # EV3100 EV4100

n 200 Series flange in with 100 Series flange out with 3/4” FPT n 40 GPM flow rate at a 5 PSI pressure drop n 0.7 seconds close time n Competitively priced n Banjo flange fittings n 175 PSI maximum working pressure n Raven-made in the U.S.A

Valves / Steel Cased Gauges Model 23520 Throttling Valve

Electric Pressure Regulator

Throttling valves are used for regulating systems with centrifugal pumps to control boom line pressure. A locknut secures the valve in position.

1/2” Polypropylene, 150 PSI, 6 GPM at 10 PSI Part # 23520-PP-12

$31.83 H

3/4” Polypropylene, 150 PSI, 18 GPM at 10 PSI Part # 23520-PP-34

Model 244C-34 shown

Part # Size (in.) 1560A 3/4 1541A 1 063-0159-001 3/4 244C-34 3/4

PSI Description 150 Texas Remcor 150 Texas Remcor 175 Raven 100 Spraying Systems

Price $129.47 H $147.93 H $111.00 M $164.25 H

$31.83 H

Check Valve (PVC)

Part # Size Price CV12 1/2” $10.50 H CV34 3/4” $11.00 H CV100 1” $15.75 H CV114 1-1/4” $21.00 H CV112 1-1/2” $22.50 H CV200 2” $32.00 H CV300 3” $67.00 H

Fog Nozzle Use this valve in any industrial or agricultural application to stop backflow and siphoning, including on portable water lines.

This is an excellent high-pressure nozzle made of corrosion-resistant nylon. An adjustable pattern from a straight stream to a wide spray is easily attained simply by rotating the end nozzle.

Model FN112

Part # FN34 FN100 FN112 FN200

Size 3/4” GH thread 1” FPT 1-1/2” FPT 2” FPT

Price $16.50 H $16.50 H $16.50 H $37.00 H

Steel Case Gauges Stem Mount

Part #

Back Mount

Stem Mount

For general use with medium noncorrosive to brass, phosphor, bronze, or beryllium copper, such as oil, gas, air, or water. The 1/4” NPT brass male connector is standard and other sizes are available. The glycerin liquid fill protects these gauges against vibration. NOTE: Use only stainless steel gauges for anhydrous ammonia and liquid fertilizers

Anhydrous Ammonia (Stainless Steel)

Anhydrous (Stainless Steel)

Liquid Filled

Valves

Back Mount

SG60-212 SG100-212 SG300-212 SG60-400 SG100-400 SG60-200B SG100-200B GG60-212B GG100-212B ASG60-212 ASG160-212 ASG400-212 ASG60-400 ASG160-400 ASG400-400 GG60-212 GG100-212 GG200-212 GG60-400 GG100-400

Range (PSI) 0-60 0-100 0-300 0-60 0-100 0-60 0-100 0-60 0-100 0-60 0-160 0-400 0-60 0-160 0-400 0-60 0-100 0-200 0-60 0-100

Size (in.) 2.5 2.5 2.5 4 4 2 2 2.5 2.5 2.5 2.5 2.5 4 4 4 2.5 2.5 2.5 4 4

Price $6.90 $6.90 $6.90 $14.50 $14.50 $6.00 $6.00 $19.50 $19.50 $12.75 $12.75 $12.75 $25.00 $25.00 $25.00 $16.00 $16.00 $16.00 $36.00 $36.00

H H H H H H H H H H H H H H H H H H H H

www.horvick.com

Spraying Systems Handguns Gunjet® Spot Spraying Handguns Model 23L low pressure spot spraying (0-250 PSI) Part# 23L............................. $72.98 H Model 23H high pressure spot spraying (250-1000 PSI) Part# 23H............................ $75.03

Model 30L low pressure spot spraying (0-250 PSI) Part# 30L............................. $67.00

Model 23L & Model 30L are both excellent for spot spraying. Model 23L is designed for flow rates up to 5 GPM and is made of all metal. Model 30’s are constructed of metal/polypropylene with a stainless steel shut-off needle and a 1/4” NPT (F) inlet. The model 30H is also good for pressure washers.

Handgun extensions* and repair kits Part # 7715-8 7715-18 7715-24 7715-30 7715-36 7715-48

Uses 8” extension 18” extension 24” extension 30” extension 36” extension 48” extension

AB23L-KIT AB30L-KIT

Repair kit–model 23L Repair kit–model 30L

Range (PSI) 0-250 0-250 0-250 0-250 0-250 0-250

Price $12.62 H $15.90 H $17.17 H $20.60 H $21.73 H $26.33 H

— —

$22.16 H $12.31 H

*High pressure extensions available.

Gunjet® Model 43 Heavy Duty Handgun Spraying Systems Model 43 handguns are quality designed and built for heavy duty service. The stem extends through the extension to the valve seat located directly behind the orifice disc for drip free shutoff and instant operating response. Convenient trigger lock for continuous spraying. All models have a trigger handle control and 1/2” NPT(F) connections.

Handgun for 200 to 800 PSI Part # 43H-AL

$149.86 H

Handgun for up to 200 PSI Part # 43L-AL

Gunjet® Garden Hose Hand gun

The Model 143 GunJet features a 3/4” NPT (F) garden hose thread and handles pressures of 30 to 800 PSI.

Model 143 Hand Gun Part # 143-AL-GH

$96.59 H

Repair Kit Part # AB143-AL-KIT

$31.15 H

$41.30 H

Brass Swivel Connector 11990-19............................. $38.62

TriggerJet®

The TriggerJet features a trigger lock, adjustable spray tip, and tip strainer. Choice of a 15” or 24” extension. Maximum pressure rating is 150 PSI. Straight and 45° adapters are included.

With 15” Extension Part # 22670-PP-15

$46.63 H

With 24” Extension Part # 22670-PP-24

$53.75 H

Part # AB22670-PP-KIT

$13.64 H

1-800-373-4084

Handguns

$149.86 H

Repair Kits Part # AB43-KIT (brass) Part # AB43-AL-KIT (aluminum)

Cone Tips and Swivels TriggerJet® Model 50800 Spray Gun

Brass Swivels

The TriggerJet spray gun is a lightweight spray gun designed for use with backpack, canister or other low pressure sprayers. nnLightweight molded polypropylene nnTrigger lock nn100 PSI max nn1/4” barb nnInternal strainer nn#18 tip standard Part # 50800-15-PP-300 (1/4” shank) Part # 50800-15-PP-406 (3/8” shank)

$17.02 H

Provide a free swiveling leakproof connection. The 11990 swivels prolong hose life by preventing kinking of hose, reduce spray gun operator fatigue. Recommended for intermittent, non-continuous swivel requirements. For temperatures up to 180°F. Part # 11990-10 11990-6 11990-9 11990-19 11990-61 37135-1

Inlet 1/4” (F) NPT 1/4” (M) NPS 1/4” (M) NPT 1/2” (M) NPT 1/4” (F) NPS 1” NPT (F)

Outlet 1/4” (F) NPS 1/4” (F) NPS 1/4” (F) NPT 1/2” (F) NPT 3/8” Hose Shank 1” NPT (M)

Price $18.15 H $18.15 H $18.15 H $38.62 H $18.15 H $74.12 H

3/4 GHT (F)

$38.21 H

Garden Hose Thread 11740B

* NO repair parts available

3/4 GHT (M)

F—female M—male NPT—tapered pipe thread NPS—straight pipe thread GHT—garden hose thread

Adjustable Cone Tips The knurled tip of the 5500 series ConeJet rotates 1/2 turn to provide spray selection from wide angle, finely atomized cone spray to a straight stream spray.

5500-3 (brass)

$20.60 H

Tip # 5500-3 Brass $20.60 H

Setting A

Setting B

liquid pressure in PSI liquid pressure in PSI 20 30 40 60 100 150 20 30 40 60 400 150

GPM 0.037 0.045 0.05 0.058 0.073 0.088 0.13 0.17 0.19 0.23 0.3 0.37 angle (°) 57 68 72 76 80 82 — — — — — — feet 2 2 2 2 3 3 27 30 31 31 31 31

Handguns

5500-PPB6 GPM 0.073 0.087 0.1 0.12 0.15 0.19 0.26 0.32 0.37 0.45 0.58 0.71 Polypropylene angle (°) 65 71 74 77 80 80 — — — — — — $9.37 H feet 2.5 3 3 3.5 3.5 3.4 32 35 36 36 36 36 5500-PPB8 GPM 0.097 0.12 0.13 0.16 0.21 0.25 0.33 0.4 0.47 0.57 0.74 0.9 Polypropylene angle (°) 66 71 74 77 80 80 — — — — — — $9.37 H feet 3 3 3 4 4 34 37 38 38 38 38

5500-PPB (poly)

5500-PPB18 GPM 0.21 0.26 0.3 0.37 0.47 0.58 0.69 0.84 0.97 1.2 1.5 1.9 Polypropylene angle (°) 71 75 77 78 80 79 — — — — — — $9.37 H feet 4 4 4 4 5 5 38 41 42 42 42 42 *11/16” nozzle cap connection fits most TeeJet® guns

$9.37 H

www.horvick.com

Spraying Systems Strainers Polypropylene and Nylon Line Strainers

(Standard)

Mesh Colors 16 30 50 80 100 200

126-F1

126-34 &1

Grey Yellow Red Blue Green Orange

126-F2

126112 & 114

Complete Strainer Part #

(*specify mesh)

Price 50 Series Flange 126ML-F1-* $34.85 H 3/4” NPT 126ML-34-* $34.85 H 1” NPT 126ML-1-* $34.85 H 75 Series Flange 126ML-F2-* $71.36 H 1-1/4” NPT 126ML-114-* $71.36 H 1-1/2” NPT 126ML-112-* $71.36 H

Accessories

The 3/4” poly line strainers have a flow rate of 23 GPM and the 1” poly line strainers have a flow rate of 34 GPM. 126 Series

Screens Mesh*

Screen Size

Price

16903-1 16903-3 16903-4 16903-5 16903-6 16903-7

16 30 50 80 100 200

Height 5-3/4” Dia. 1-3/8”

$13.99 H

15941-1 15941-2 15941-3 15941-4 15941-5

16 30 50 80 100

Height 7-15/16” Dia. 2-1/4”

$19.69 H

Part #

126 Series Standard Replacement Parts Item 1 1A 1A 2 2 2 2 2 2 3 3 4 5 5 6

Part # 50491-PP 50492-1-PP 50492-34-PP 16903-1 16903-3 16903-4 16903-5 16903-6 16903-7 50494-EPR 50494-VI 50493-PP 63150-EPR 63150-VI 48655-PP

Description Strainer Head, Polyprop. (Black) (50-Series Flange) Strainer Head, Polyprop. (Black) (1” NPT) Strainer Head, Polyprop. (Black) (3/4” NPT) Screen, Stainless Steel w/ Polyprop. Frame, 16 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 30 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 50 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 80 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 100 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 200 Mesh Gasket, EPDM Rubber Gasket, Viton Bowl, Polypropylene (Gray) (3/4’ &1” NPT) Gasket, EPDM Rubber Gasket, Viton Cap, Polypropylene (Gray)

Price $12.79 H $12.79 H $12.79 H $13.99 H $13.99 H $13.99 H $13.99 H $13.99 H $13.99 H $2.33 H $5.93 H $12.62 H $3.09 H $7.89 H $4.58 H

Item 1 1A 1A 2 2 2 2 2 2 3 3 4 5 5 6

Part # 63025-F-PP 63066-112-PP 63065-114-PP 15941-1 15941-2 15941-3 15941-4 15941-5 15941-6 48656-EPR 48656-VI 48654-PP 63150-EPR 63150-VI 48655-PP

Description Strainer Head, Polyprop. (Black) (75-Series Flange) Strainer Head, Polyprop. (Black) (1 1/2”NPT) Strainer Head, Polyprop. (Black) (1 1/4” NPT) Screen, Stainless Steel w/ Polyprop. Frame, 16 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 30 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 50 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 80 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 100 Mesh Screen, Stainless Steel w/ Polyprop. Frame, 120 Mesh Gasket, EPDM Rubber Gasket, Viton Bowl, Polypropylene (Gray) (1” NPT) Gasket, EPDM Rubber Gasket, Viton Cap, Polypropylene (Gray)

Price $26.10 H $26.10 H $26.10 H $19.69 H $19.69 H $19.69 H $19.69 H $19.69 H $19.69 H $4.71 H $9.86 H $25.84 H $3.09 H $7.89 H $4.58 H

1-800-373-4084

Spraying Systems Strainers Line Filter Replacement Screen Reference Chart

Accessories

Identify your screen for proper replacement. More screens under individual filters.

Hypro & Compatibles

Norwesco Y-Line Strainer

Screen # 1700-0064 1700-0065 1700-0044 1700-0045 1700-0057 1700-0058 1700-0051 1700-0063

Screen Size 1-1/2” x 1-1/4” 1-1/2” x 1-1/4” 2-1/4” x 2” 2-1/4” x 2” 3-1/8” x 2-7/8” 3-1/8” x 2-7/8” 4-1/4” x 3-3/4” 4-1/4” x 3-3/4”

Mesh 1/8” sq. 1/8” sq. 1/8” sq. 1/8” sq. 1/8” sq. 1/8” sq. Gasket Gasket

Fits Mini 1/4” Buna-N Mini 1/4” Viton 1/2” & 3/4” Buna-N 1/2” & 3/4” Viton 1/2” & 3/4” Buna-N 1/2” & 3/4” Viton Buna Viton

3800-0048 3800-0046 3800-0047 3800-0029 3800-0025 3800-0026 3800-0040 3800-0041 3800-0042 3800-0043 3800-0044 3800-0045 3800-0065 3800-0066 3800-0067 3800-0032 3800-0033

1” D x 1-3/8” H 1” D x 1-3/8” H 1” D x 1-3/8” H 1-5/8” D x 3-3/4” 1-5/8” D x 3-3/4” 1-5/8” D x 3-3/4” 2-3/8” D x 4-1/4” 2-3/8” D x 4-1/4” 2-3/8” D x 4-1/4” 2-3/8” D x 4-1/2” 2-3/8” D x 4-1/2” 2-3/8” D x 4-1/2” 2-3/8” D x 5-1/2” 2-3/8” D x 5-1/2” 2-3/8” D x 5-1/2” 2-3/4” D x 5-1/8” 2-3/4” D x 5-1/8”

20 50 80 20 50 80 20 50 80 20 50 80 20 50 80 40 80

3/8” & 1/2” Mini’s 3/8” & 1/2” Mini’s 3/8” & 1/2” Mini’s 1/2” & 3/4” 1/2” & 3/4” 1/2” & 3/4” 1” 1” 1” 1-1/4” 1-1/4” 1-1/4” 1-1/2” 1-1/2” 1-1/2” 1-1/4” Old Style 1-1/4” Old Style

H H H H H H H H H H H H H H

Screen # 61410 61411 61412 61561

Screen Size 2-3/8” D x 4-1/4” 2-1/8” D x 6-7/8” 2-1/8” D x 6-7/8” 2-1/8” D x 6-7/8” 3-1/2” x 3-1/4”

Mesh H H H H

Fits 1-1/4” 20 1-1/2” 40 1-1/2” 80 1-1/2” 1/8” sq. 1-1/2”

& & & &

2” 2” 2” 2”

Banjo Y-Line Strainer & Gaskets Screen # Screen Size LS-075G & GV 1-3/4” x 1-1/2” LS-100G & GV 2-1/2” x 2-1/4” LS-150G & GV 3-5/8” x 3-1/4” LS-300G-1 8-1/2” D x 8” H 12724 UV15163

Drain Plug O-ring Drain Plug O-ring

LS-120 LS-140 LS-180 LS-220 LS-250 LS-280

1-3/4” D x 5-1/4” H 1-3/4” D x 5-1/4” H 1-3/4” D x 5-1/4” H 2-5/8 D x 7” H 2-5/8 D x 7” H 2-5/8 D x 7” H

Mesh Fits 1/8” rnd 1/2” & 3/4” 1/8” rnd 1” & 1-1/4” 3/16” rnd 1-1/2” & 2” 1/4” rnd 1/2” & 3/4” 1” & 1-1/4” 20 40 80 20 40 80

1” & 1-1/4” 1” & 1-1/4” 1” & 1-1/4” 1-1/2” & 2” 1-1/2” & 2” 1-1/2” & 2”

Banjo T-Line Strainer & Gaskets Screen # LST-100G LST-150G LST-130 LST-150 LST-180 LST-1110 LST-1530 LST-1550 LST-1580

Screen Size 2-1/4” D x 2” H 3-1/4” D x 2-7/8” 1-3/4” D x 5-1/4” 1-3/4” D x 5-1/4” 1-3/4” D x 5-1/4” 1-3/4” D x 5-1/4” 2-1/4”” D x 8” H 2-1/4”” D x 8” H 2-1/4”” D x 8” H

H H H H H

Mesh 1/8” rnd 3/16” rnd 30 50 80 110 30 50 80

Fits 3/4” & 1” 1-1/4” & 1-1/2” 3/4” & 1” 3/4” & 1” 3/4” & 1” 3/4” & 1” 1-1/4” & 1-1/2” 1-1/4” & 1-1/2” 1-1/4” & 1-1/2”

www.horvick.com

Line Strainers

Mini-Bowl (MPT)

Part #

Standard (FPT)

Hypro Line Strainers

Part # Size (in.) Mesh Price YLS12580 1-1/4 80 $28.38 H YLS15020 1-1/2 20 $53.11 H YLS15040 1-1/2 40 $55.60 H YLS15080 1-1/2 80 $55.60 H YLS20020 2 20 $53.11 H YLS20040 2 40 $55.60 H YLS20080 2 80 $55.60 H YLS30020 3 20 $325.07 H YLS30040 3 40 $325.07 H Screens for both sizes, the 1-1/2” and the 2” strainers, are 2-1/2” in diameter and 6-7/8” high.

Dia. Length (in.) (in.) 1” 1-3/8” 1” 1-3/8” 1-1/2” 3-3/4” 1-1/2” 3-3/4” 2-1/4” 4-1/4” 3-1/4” 4-1/2” 2-3/4” 5-1/8” 2-1/4” 5-3/8”

1-800-373-4084

Bowl Gaskets

Strainer Size 1/2” Mini 3/8” Mini 1/2” 3/4” 1” 1-1/4” 1-1/4” (old) 1-1/2”

Mesh

3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2

20 40 80 20 50 80 20 40 80 20 40 80 20 50 80 20 50 80 20 50 80

Part # 61508 61509 61510 61561 61287 61288 62249 62252 62261 62400

Price $9.48 H $9.48 H $9.48 H $9.95 H $9.95 H $9.95 H $15.00 H $15.00 H $16.25 H $16.25 H $16.25 H $17.50 H $22.50 H $22.50 H $25.00 H $25.00 H $25.00 H $31.50 H $26.75 H $26.75 H $32.25 H

Description 20 Mesh Screen 40 Mesh Screen 80 Mesh Screen Bowl Gasket 1-1/2” Body & Cap 2” Body & Cap 12 Mesh—3” 20 Mesh—3” 40 Mesh—3” 80 Mesh—3” Replacement Screen 3800-0048 3800-0046 3800-0047 3800-0048 3800-0046 3800-0047 3800-0029 3800-0025 3800-0026 3800-0029 3800-0025 3800-0026 3800-0040 3800-0041 3800-0042 3800-0043 3800-0044 3800-0045 3800-0065 3800-0066 3800-0067

Price $19.00 H $23.98 H $23.98 H $1.21 H $32.27 H $32.27 H $88.64 H $88.64 H $88.64 H $88.64 H

Price $5.05 H $2.45 H $4.95 H $5.05 H $2.45 H $4.95 H $7.45 H $6.20 H $9.90 H $7.45 H $6.20 H $9.90 H $9.30 H $9.30 H $15.50 H $9.35 H $9.25 H $17.75 H $15.25 H $13.50 H $21.75 H

Replacement Parts for Line Strainers

Bowls

Replacement Screens

3350-0086 3350-0080 3350-0083 3350-0085A 3350-0079A 3350-0082A 3350-0056A 3350-0046A 3350-0043A 3350-0040A 3350-0034A 3350-0035A 3350-0057A 3350-0058A 3350-0059A 3350-0071A 3350-0072A 3350-0073A 3350-0112A 3350-0113A 3350-0114A

Size (in.)

Replacement Parts

Part # Material 1700-0064 EPDM Mini-Bowl 1700-0044 Buna-N 1700-0045 Viton 1700-0057 Buna-N 1700-0058 Viton 3351-0036 Poly Mini-Bowl 3351-0039 Polypropylene 3351-0043 Polypropylene 3351-0020 Clear Polyamide 3351-0024 Clear Nylon

Fits (in.) Price 1/4 To 1/2 $0.85 H 1/2 To 3/4 $0.90 H 1/2 To 3/4 $6.85 H 1 To 1-1/2 $1.20 H 1 To 1-1/2 $9.05 H 3/8 To 1/2 $2.40 H 1/2 To 3/4 $4.60 H 1 To 1-1/2 $18.00 H 3/8 To 1/2 $4.10 H 1 to 1-1/2 $33.00 H

Accessories

Norwesco Line Strainers

T-Strainers & Misc. Strainers Banjo Polypropylene T-Strainer

Part # LST075-30 LST075-50 LST075-80 LST075-100 LST100-30 LST100-50 LST100-80 LST125-50 LST125-80 LST150-50 LST150-80

Accessories

nnHeavy-duty glass reinforced polypropylene nnClean-out plug nn304 S.S. reinforced screens nn150 PSI at 700 F nnEPDM gaskets. Viton available

Size 3/4” 3/4” 3/4” 3/4” 1” 1” 1” 1-1/4” 1-1/4” 1-1/2” 1-1/2”

Description Strainer-30 Mesh screen Strainer-50 Mesh screen Strainer-80 Mesh screen Strainer-100 Mesh screen Strainer-30 Mesh screen Strainer-50 Mesh screen Strainer-80 Mesh screen Strainer-50 Mesh screen Strainer-80 Mesh screen Strainer-50 Mesh screen Strainer-80 Mesh screen

Price $37.07 H $37.07 H $37.07 H $37.07 H $37.07 H $37.07 H $37.07 H $73.85 H $73.85 H $73.85 H $73.85 H

Replacement Parts and Screens Part # LST-075HB LST-075H LST-100B LST-100HB LST-100H LST-125H LST-150H LST-150B LST-130* LST-150* LST-180* LST-1100* LST-1530* LST-1550* LST-1580* LST-15100*

Description Head & Bowl 3/4” Head 3/4” Bowl Only 3/4” & 1” Head & Bowl 1” Head 1” Head 1-1/4” Head 1-1/2” Bowl—Fits 1-1/4” & 1-1/2” 30 Mesh Screen 3/4” & 1” 50 Mesh Screen 3/4” & 1” 80 Mesh Screen 3/4” & 1” 100 Mesh Screen 3/4” & 1” 30 Mesh Screen 1-1/4” & 1-1/2” 50 Mesh Screen 1-1/4” & 1-1/2” 80 Mesh Screen 1-1/4” & 1-1/2” 100 Mesh Screen 1-1/4” & 1-1/2”

Price $21.12 H $11.14 H $12.64 H $21.12 H $11.14 H $26.76 H $26.76 H $20.82 H $17.50 H $17.50 H $17.50 H $17.50 H $28.73 H $28.73 H $28.73 H $28.73 H

Bowl Gaskets Part # LST-100G LST-100GV LST-150G LST-150GV

Screen Screen Dia.” Length” 1-1/4” 5-3/4” 2-1/4 7-15/16

Part # LST-034G 13778 Mesh Size 6 Mesh 12 Mesh 20 Mesh

* NOTE: Poly screens shown/priced. Screens are available in all stainless steel or poly cage with S.S Mesh.

Kleen Flo Lake Strainer The Kleen Flo Lake Screen has a rust proof fiberglass netting. The outlet is a 2” MPT fitting. Hooks are attached to the main body so that it may be hung from a platform, keeping the screen from resting on the bottom. Lake Strainer Part # KLEEN FLO .............. $55.00

Replacement Screen Part # KLEEN FLO-RS......... $16.00

3/4” & 1” - Viton 3/4” & 1” 1-1/4” & 1-1/2” - Viton 1-1/4” & 1-1/2”

Price $3.32 H $7.07 H $3.72 H $8.55 H

Screen Gaskets

Replacement Screens T-Strainer Size 1” & 3/4” 1-1/4” & 1-1/2”

Description Bowl Gasket Bowl Gasket Bowl Gasket Bowl Gasket

Description Banjo T-Strainer screen gasket 1-1/4” to 1-1/2” Banjo T-Strainer screen gasket 3/4” to 1” Rib Color White Black Beige

Mesh Size 30 Mesh 40 Mesh 50 Mesh

Rib Color Yellow Brown Red

Mesh Size 80 Mesh 100 Mesh 120 Mesh

Price $2.77 H $1.86 H Rib Color Blue Green Black

“Frog” Strainer Frog Strainer 2” end strainer Part # FS200

$11.00 V

www.horvick.com

Y-Strainers Banjo Polypropylene Y-Strainers

nnPrecision molded construction nnCorrosion resistant nnLightweight nnFiberglass reinforced nnEPDM bowl gasket nnHeavy duty end cap threads nn1/2”– 1-1/4” 75 PSI 1-1/2”– 2” 150 PSI nnClean-out plug on 1-1/2” & 2” sizes

Size 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1” 1” 1-1/4” 1-1/4” 1-1/4” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 2” 2” 2” 2” 2” 2”

Description Strainer-20 Mesh Screen Strainer-40 Mesh Screen Strainer-80 Mesh Screen Strainer-20 Mesh Screen Strainer-40 Mesh Screen Strainer-80 Mesh Screen Strainer-20 Mesh Screen Strainer-40 Mesh Screen Strainer-80 Mesh Screen Strainer-20 Mesh Screen Strainer-40 Mesh Screen Strainer-80 Mesh Screen Strainer-6 Mesh Screen Strainer-12 Mesh Screen Strainer-20 Mesh Screen Strainer-30 Mesh Screen Strainer-50 Mesh Screen Strainer-80 Mesh Screen Strainer-6 Mesh Screen Strainer-12 Mesh Screen Strainer-20 Mesh Screen Strainer-30 Mesh Screen Strainer-50 Mesh Screen Strainer-80 Mesh Screen

Price $35.06 H $35.06 H $35.06 H $35.06 H $35.06 H $35.06 H $35.06 H $35.06 H $38.49 H $35.06 H $35.06 H $38.49 H $77.15 H $77.15 H $77.15 H $77.15 H $77.15 H $77.15 H $77.15 H $77.15 H $77.15 H $77.15 H $77.15 H $77.15 H

Screen Gaskets Part # LS-125G LS-141G

Description Banjo Y-Strainer screen gasket 1” to 1-1/4” Banjo Y-Strainer screen gasket 1-1/2” to 2”

Price $2.32 H $3.37 H

Y-Strainer Parts

Replacement Screens Y-Strainer Size 1/2” & 3/4” 1” & 1-1/4” 1-1/2” & 2” 2” 3”

Screen Screen Dia.” Length” 1” 4” 1-5/8” 5-1/4” 2-1/4” 7” 2-5/8” 7” 4-1/4” 9-1/2”

* NOTE: Poly screens shown/priced. Screens are available in all stainless steel or poly cage with S.S mesh.

Part # LS-075C1 LS-100C1 LS-150C LS-720 LS-740 LS-780 LS-120 LS-140 LS-180 LS-206 LS-212 LS-220 LS-230 LS-250 LS-280 LS-304 LS-308 LS-312 LS-320 LS-350 LS-075G LS-100G LS-300G1 LS-300GV LS-150G Mesh Size 6 Mesh 12 Mesh 20 Mesh

1-800-373-4084

Mesh Size — — — 20 40 80 20* 40* 80* 6 12* 20* 30 50* 80 4 8 12 20 50 — — – – — Rib Color White Black Beige

Description End Cap (New Style) End Cap (New Style) End Cap (New Style) Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Mesh Screen Bowl Gasket Bowl Gasket Epdm Bowl Gasket Viton Bowl Gasket Bowl Gasket Mesh Size 30 Mesh 40 Mesh 50 Mesh

Rib Color Yellow Brown Red

Fits (in.) 1/2” & 3/4” 1” & 1-1/4” 1-1/2 & 2” 1/2 & 3/4” 1/2 & 3/4” 1/2 & 3/4” 1” & 1-1/4” 1” & 1-1/4” 1” & 1-1/4” 1-1/2” & 2” 1-1/2” & 2” 1-1/2” & 2” 1-1/2” & 2” 1-1/2” & 2” 1-1/2” & 2” 3” 3” 3” 3” 3” 1/2” & 3/4” 1” & 1-1/4” 3” 3” 1-1/2” & 2” Mesh Size 80 Mesh 100 Mesh 120 Mesh

Price $8.43 H $13.38 H $21.18 H $20.75 H $20.75 H $20.75 H $20.75 H $20.75 H $20.75 H $42.48 H $42.48 H $42.48 H $42.48 H $42.48 H $42.48 H $117.79 H $117.79 H $131.85 H $131.85 H $131.85 H $2.83 H $3.32 H $12.26 H $36.04 H $3.32 H Rib Color Blue Green Black

Accessories

Part # LS-050-20 LS-050-40 LS-050-80 LS-075-20 LS-075-40 LS-075-80 LS-100-20 LS-100-40 LS-100-80 LS-125-20 LS-125-40 LS-125-80 LS-150-06 LS-150-12 LS-150-20 LS-150-30 LS-150-50 LS-150-80 LS-200-06 LS-200-12 LS-200-20 LS-200-30 LS-200-50 LS-200-80

Manifold Line Strainers

Manifold Line Strainers Manifold 1” Y-Strainers Part # MLS100-20 MLS100-40 MLS100-80

Description 2” Standard Port Flanged Y-Strainer / 20 Mesh 2” Standard Port Flanged Y-Strainer / 50 Mesh 2” Standard Port Flanged Y-Strainer / 80 Mesh

Manifold 2” Y-Strainers nnEPDM Gaskets nn316 Stainless Steel Screens nn150 PSI Max.

Part # MLS200-20 MLS200-30 MLS200-50 MLS200-80 MLS200-100

Accessories

nnEPDM Gaskets nn316 Stainless Steel Screens nn150 PSI Max.

Part # MLST100-16 MLST100-30 MLST100-50 MLST100-80 MLST100-100 MLST150-16 MLST150-30 MLST150-50 MLST150-80 MLST150-100

Max PSI Price 150 $87.45 H 150 $78.13 H 150 $87.45 H 150 $87.45 H 150 $87.45 H ®

Description 3” Standard Port Flanged Y-Strainer / 12 Mesh 3” Standard Port Flanged Y-Strainer / 20 Mesh 3” Standard Port Flanged Y-Strainer / 50 Mesh

Description 1” Flanged T-Strainer - 16 Mesh 1” Flanged T-Strainer - 30 Mesh 1” Flanged T-Strainer - 50 Mesh 1” Flanged T-Strainer - 80 Mesh 1” Flanged T-Strainer - 100 Mesh 2” Standard Port T-Strainer - 16 Mesh 2” Standard Port T-Strainer - 30 Mesh 2” Standard Port T-Strainer - 50 Mesh 2” Standard Port T-Strainer - 80 Mesh 2” Standard Port T-Strainer - 100 Mesh

Description 2” Standard Port Flanged Y-Strainer / 20 Mesh 2” Standard Port Flanged Y-Strainer / 30 Mesh 2” Standard Port Flanged Y-Strainer / 50 Mesh 2” Standard Port Flanged Y-Strainer / 80 Mesh 2” Standard Port Flanged Y-Strainer / 100 Mesh

Manifold 1”&2” Standard Port T-Strainers

Max PSI Price 150 $37.37 H 150 $34.03 H 150 $38.49 H C

Manifold 3” Y-Strainers Part # MLS300-12 MLS300-20 MLS300-50

Max PSI Price 100 $487.99 H 100 $487.99 H 100 $487.99 H

Max PSI 150 150 150 150 150 150 150 150 150 150

Price $40.86 H $40.86 H $40.86 H $40.86 H $40.86 H $76.10 H $76.10 H $76.10 H $76.10 H $76.10 H

Replacement Parts MLST100 & MLST150

MLS200

Item Part # Description Price 1 MLST100-H 1” Flanged T-Strainer Head $14.10 H 1 MLST150-H 1-1/2” Flanged T-Strainer Head $29.72 H 2 LST-100B 1” T-Strainer Bowl, Drain Plug, O-ring $12.64 H 2 LST-150B 1-1/2” T-Strainer Bowl, Drain Plug, O-ring $20.82 H 3 12777 Plug for 1” T-Strainer $2.24 H 3 LSQ-200PL Plug for 1-1/2” T-Strainer $2.67 H 4 UV-15163 O-ring for 1” Manifold T-Strainer $0.44 H 4 LSQ-200R O-ring for 1-1/2” Manifold T-Strainer $0.45 H 5 LST-100G EPDM Bowl Gasket for 1” $3.32 H 5 LST-150G EPDM Bowl Gasket for 1-1/2” $3.72 H 5 LST-100GV FKM (Viton Type) Bowl Gasket for 1” $7.07 H 5 LST-150GV FKM (Viton Type) Bowl Gasket for 1-1/2” $8.55 H 6 LST-116 130 1” T-Strainer Screen 16, 30, $17.50 H 150,180,1100 50, 80, 100 Mesh Sizes Available 6 LST-1516 1530 1-1/2” T-Strainer Screen 16, 30, $28.73 H 1550,1580,15100 50, 80, 100 Mesh Sizes Available

Item Part # 1 MLS200B 2 LST-150B 3 LSQ-200PL 4 LSQ-200R 5 LS-150G 5 LS-150GV N/S LS-206 N/S LS-212 N/S LS-220 N/S LS-230 N/S LS-250 N/S LS-280 N/S LS-2120

Description Price 2” SP Manifold Strainer Body $41.24 H 2” SP Strainer Cap, Drain Plug, O-ring $20.82 H Plug $2.67 H O-ring $0.45 H 2” SP EPDM Bowl Gasket $3.32 H 2” SP FKM (viton type) Bowl Gasket $11.14 H 2” 6 Mesh Line Strainer Screen $42.48 H 2” 12 Mesh Line Strainer Screen $42.48 H 2” 20 Mesh Line Strainer Screen $42.48 H 2” 30 Mesh Line Strainer Screen $42.48 H 2” 50 Mesh Line Strainer Screen $42.48 H 2” 80 Mesh Line Strainer Screen $42.48 H 2” 120 Mesh Line Strainer Screen $42.48 H

www.horvick.com

Stand-Alone Flow Meters Raven Flow Max 110 Flow Meter Monitor displays.. n Batch Volume n Rate of Flow n Total volume measured n Sub volume measured

Now you can bulk load from a nurse truck to a sprayer tank or from a chemical bulk tank to a transport truck economically and dependably. The Flow Max 110 measures the liquid being pumped from one tank to another. An in-line flow meter (not included) provides a signal to the 110 monitor which displays a readout in either gallons or liters. Installation can be done on the sprayer, the nurse tank unit or the chemical fill plant. Operates on 12vdc.

Part # 063-0171-357

$539.00 M

Raven Flow Max 220 Flow Meter Flow Max 220 Features

Part # 063-0172-123

$734.00 W

Part # 507-2001-006 Battery Kit

$13.59 M

When it comes to an accurate, flow monitor for nurse truck to sprayer transfer, the new digital Flow Max 220 from Raven Industries leads the way.

n Self-contained digital display indicates flow rate and totals n Records three separate total volumes n No more inaccurate sight tubes n Rate of flow displayed in U.S. or metric

n Mount in-line on sprayer, nurse truck or chemical fill tank n Replaceable 3.6 volt long-life battery n 6-digit easy-to-read display n Raven reliability, quality and service n Flanged 2” plumbing n 200 GPM maximum n 3 button programming

Banjo 1”, 2” & 3” Full Port Flow Meter Up To 300 Gallons Per Min. (GPM)

FEATURES Part # FM100 1” Full Port Female NPT

Part # MFM220 2” Full Port Manifold

Part # MFM100 1” Full Port Manifold

Part # MFM300 3” Full Port Manifold

$733.00 V

1-800-373-4084

$833.00 V

$1,045.00 V

n Displays overall total volume & batch total volume! n Flow rate allows for Gallons or Liters Per Minute. n Digital readout in Metric or English. n Magnetic style meter. n Self calibrating meter—measures all viscous liquids.

n Easy to change six (6) AA batteries. n No moving parts to fail during use. n Glass-reinforced polypropylene. n Temperature range from 0º to 150º. n Accuracy is approximately within 1% from 30 to 300 gallons.

Electronics — Controllers

Add a flow meter from Page 104

GPS Antenna Raven Phoenix 200 DGPS Receiver Features Phoenix 200 DGPS Receiver Part # 117-0171-071

Electronics — Controllers

$1,795.00 W

nnSub-meter, WAAS enabled receiver. nnSpecifically designed for use in areas where WAAS signals are weak, this is a great all-around receiver for many different types of applications and equipment.

nnUpgradeable to the new e-Dif® differential correction. nn e-Dif® is a technique that models the differential correction over a period of time and then applies it to the GPS data to maintain a consistent, relative position. e-Dif® is ideal for locations where the WAAS signal is very weak or non-existent.

Astro II GPS Based Speed Sensor A direct replacement for magnetic wheel speed sensors or radar guns and can interface to most brands of monitors and controllers. Part # Part # 1 Hz 5 Hz Fits to: 01410 01425 New MT products 01411 01426 MT-3000/5000 01413 01428 DJ Amp 01 415 01430 Raven

1 Hz Sensor.......................$336.00

V 5 Hz sensor.......................$453.00 V

Raven Master Foot Switch

Power Grip

Raven now offers a Master Foot Switch to use with our SCS consoles and 5, 7, and 10 boom switchboxes. It is a simple installation and a great add-on to any of our SCS console systems Master Foot Switch Part # 063-0173-169

$379.00 M

Part # Size 91150 3” 91240 4.5” 91200 4.5” 91300 6” 91320 6” 91340 6” 28504 60024 49345-T 4.5”

nnCompact nnAccurate nnDurable nnMagnetic mount bracket. nnNot affected by crop canopies or adverse ground conditions.

Get a GRIP.... these vacuum cups are used to hold specialized equipment, or consoles in place. Use on any smooth, non-porous surface such as glass, metal or plastics.

Description Capacity Price 1/4” Stud 15 lbs. $44.00 V 1/4” Insert 40 lbs. $44.00 V 1/4” Stud 40 lbs. $46.00 V Flip Handle 70 lbs. $67.00 V Rigid Offset Handle 70 lbs. $63.00 V Tie Down Ring 70 lbs. $67.00 V Silicone Grease $0.95 V Replacement Filter $0.30 V Replacement Cup $23.00 V

www.horvick.com

Field Computer — Raven Raven Cruizer II™ Cruizer II w/patch antenna Part # Cruizer w/helix antenna Part #

Raven Cruizer II™

Increasing your mobility and performance. Cruizer II brings greater accuracy and efficiency to a variety of operations—from tillage to seeding to spraying to harvesting. Cruizer II moves easily from tractor to tractor, which makes it a great “second” guidance unit for equipment and applications that don’t require upper-end capability. It even comes with a weather resistant option for openair cabs. dd Raven assisted steering and automatic planter and A boom section controls to make life simpler still.

nnBrilliant 5.7” highresolution touch-screen display features easy to understand icon-based menus, status indicators, and day/night mode. nnSimple installation/ mounting. nnBuilt-in 10 Hz DGPS receiver and external DGPS antenna for accurate sub-meter guidance. nnIntegrated lightbar system for added confidence & visual support. nnEnhanced “Last Pass” guidance with automatic correction simplifies contour and irregularly shaped fields and prevents repeating errors nnRecord keeping and coverage maps made simple with file formats for saving, reporting

and importing data. nnAbility to save job files and A-B lines. nnAbility to record field markers. nnStraight A-B, Last Pass, Fixed Contour and Pivot field patterns. nnIntegrated CANbus technology for adding Raven assisted steering and automatic boom section and planter controls. nnInterfaces with Raven’s new SmartYield™ monitoring system. nnOptional weather-resistant model. nnDigi-Star® scale interface for spreading manure more accurately on fields nnBird’s-eye view and downfield 3-D perspective.

Raven Envizio Pro II™ Large 6.4” color LCD touch screen Envizio Pro II w/ patch antenna Part # Envizio Pro II w/helix antenna Part # A complete multi-function field computer for growers. Envizio Pro II is the perfect interface for tying your different system functions together—and rewarding you with greater efficiency, performance and savings. eamless operation. Integrates all system functions S from GPS technology, advanced data mapping and record keeping to dual product control, boom management, assisted steering and planter controls. oing more with less. With the latest in advanced D computer software and RTK technology, Envizio Pro II brings a new level of accuracy and control to virtually every production area. Intelligently designed. Envizio Pro II is designed for growth and is compatible with commonly used industry software and equipment.

1-800-373-4084

Envizio Pro II Key Features & Benefits nnSimple to operate nnAffordable nnComplete multi-function capabilities for every stage of your operation nnBrilliant 6.5” touchscreen display for clear viewing day or night nnDual-product control for added efficiency, including direct injection nnSingle-product VRA technology for more precise planter and application controls nnIntegrated dual-frequency GPS receiver upgradeable to RTK accuracy

nnSlingshot-ready for wireless data transfer, remote support capabilities, high-speed Internet access—and more! nnLast Pass contour guidance makes irregularly shaped fields a snap nnFour field patterns for easier line acquisition and faster, more accurate coverage nnReal-time data mapping, field reports, and record keeping for better decisions and performance nnBMP and SHP file formats enhance your ability to record, analyze and make better use of field data

Sprayer Electronics

The benefits of an easy-to-use precision guidance system without pushing your budget off course. We removed two of the biggest obstacles—complexity and high cost. Cruizer II makes it simple to add more power and capability—when you’re ready for auto-steering and automatic on-off planter and boom section controls.

Simple, affordable guidance made faster and more powerful than ever.

Boom Management Raven Autoboom Automatic boom height controller Spraying perfection can be achieved with Raven’s automatic boom height controller - the AutoBoom. It adjusts your booms automatically at speeds of up to 20mph, increasing your spraying speed 15-30%!

Each AutoBoom kit consists of two parts: A Controller Kit — the console and cabling that controls the system from your cab. This kit remains the same regardless of the machine you are using. An Installation Kit — the components on the exterior of your machine. The installation kit is machine-specific, so different machines will use different kits.

Raven offers three AutoBoom systems.

PowerGlide Autoboom Low cost Autoboom leveling kit

Sprayer Electronics

The PowerGlide system is a low-cost starter system that uses gauge wheels to detect the ground height and then automatically adjusts the boom with hydraulic pressure. Perfect for trailed or self-propelled sprayers.

n Low-cost Autoboom kit n One button engage n Compact console, takes up less space in the cab

n Easy to use and adjust n Great for trailed or self-propelled sprayers n Optional suspension wheel

n Pressure based boom leveling system n Available in either CANbus or standard configuration n Simplified calibration procedure n

n Use with Viper Pro, Envizio Pro II or SCS4X00 consoles for setup and operation n Suspension wheel system n Hands free operation, just set the boom height and go!

n Ultrasonic boom leveling system with ultrasonic sensor n Available in either CANbus or standard configuration n Simplified calibration procedure, one button calibra-

tion n Use with Viper Pro, Envizio Pro II or SCS4X00 consoles for setup and operation n Hands free operation, just set the boom height and go!

PowerGlide Plus Autoboom Pressure based boom leveling system The PowerGlide Plus system boasts all the same features as the PowerGlide system, but is available in either CAN or standard configuration. The CAN configuration can be operated through a Raven Viper Pro, Envizio Pro II, or SCS4000 console.

UltraGlide Autoboom Updated G2 Ultrasonic boom leveling system The UltraGlide system uses ultrasonic sensors to detect ground height and then automatically adjusts the boom with hydraulic pressure. This systems is also available in CAN or standard configuration and can be operated through a Raven Viper Pro, Envizio Pro II, or SCS4000 console.

www.horvick.com

Boom Management Raven SmartBoom Spray Boom Section Control

The SmartBoom system, like the existing AccuBoom system, offers boom section control, automatically turning boom sections on or off to reduce skips and overlaps during application.

n Create no-spray areas; omit skips and product waste n Adjustable Look-Ahead times n Adjustable Percent coverage; you decide how much is enough n SmartBoom override; allows system to operate from a dead stop n Control up to 30 amps of current

Raven OmniRow™

Fully integrated design delivers total population control For maximum yields and efficiency, Raven’s groundbreaking new OmniRow advanced planter control system takes you where others can only dream of going. Its fully integrated design, with RTK sub-inch accuracy and patent-pending planter control technology, gives you the power to control seeding rates by row or sections with more precision and reliability than ever before.

OmniRow™ Motor-Clutch A true industry first. OmniRow’s uniquely integrated motor-clutch design. As a single integrated unit, not two. Each OmniRow motor-clutch handles both on/off and population control functions.

Key Features & Benefit

Envizio Pro II™ Field Computer n Variable-rate seeding

is the driving force for the new OmniRow advanced planter control system—and works seamlessly with the Slingshot RTK/Online Service for greater efficiency and performance. From your first pass to your last, Envizio Pro II is the perfect interface and monitor for tying your different system functions together

Optional Slingshot™ RTK/ Online Service Slingshot delivers unrivaled connectivity through mobile phone networks for access to a groundbreaking system of RTK correction signals, online services, sophisticated data management capabilities, precision ag equipment—and instant in-field support and service.

1-800-373-4084

(prescriptionbased or manual) for maximum yields and savings. n Automatic planter/ population control by row or section offers greater savings and convenience. n Real-time seed singulation by row immediately identifies skips and doubles— and helps eliminate problems. n Revolutionary singleunit motorclutch design delivers greater efficiency, durability and performance.

n Hydraulically driven motor clutch assures greater precision and reliability. n Documentation and mapping capabilities enable you to evaluate seed hybrid/variety selection and pest management and fertilization practices to get the very most out of your fields. n Slingshot-ready for wireless RTK corrections with sub-inch accuracy, data transfer, remote support capabilities, high-speed Internet access—and more.

Sprayer Electronics

It is a completely self-contained system, doesn’t need an Envizio Plus or Viper to control it. Using “spray” or “no spray zone” areas, the SmartBoom automatically turns the boom section off if it is in a field area that has been previously applied. It also turns the boom section back on after leaving the previously applied area, eliminating skips.

Features n True “plug and play” installation for SCS consoles. Must be used with the Raven SCS series controllers (SCS 440, 450, 460, and 660). In addition, SmartBoom will work with any GPS receiver that has a minimum of 4 Hz. n Control up to 7 boom sections n Create field boundaries; never spray outside of the field

Application Management Raven OmniSeed™ The ultimate seeding experience starts here.

Sprayer Electronics

OmniSeed is the most advanced air seeding control system money can buy. With this fully integrated system you will have the ultimate in productivity. Control where you seed and how much. OmniSeed is easy to set up and gives you control over a wide range of seeding rates with fast, precise response. Run Blockage powered by AgTron. Monitor seed rate and blockage with ease. Choose from measurements in pounds per acre or seeds per acre and even get combined readings on a seed/fertilizer mix. One-stop service and support to keep you going. Raven can remotely access into your cab to help you troubleshoot on the fly. And should you need it, we have a vast dealer network for additional service and support.

Key Features and Benefits n Single-unit motor clutch gives you greater durability and performance with less downtime n Real-time down pressure monitoring keeps you informed of changing soil conditions for greater efficiency n Hydraulically driven motor clutch assures greater precision and reliability n Documentation and mapping capabilities evaluate seed selection and fertilization to ensure greater yields n Slingshot-ready for wireless RTK corrections with sub-inch accuracy, data transfer, remote support and more to put you in control at all times

Raven SmartYield™ Raven’s new SmartYield™ yield monitoring system is the perfect partner for any combine, when paired with Raven’s Envizio Pro II™ field computer or Cruizer II™ guidance system.

High Value Points Better records for better decisions. Accurate yield records and field mapping give you critical performance data to make better management decisions from year to year for greater savings and productivity. That’s true for evaluating seed hybrids/varieties as well as your pest management and fertilization program. Simple, accurate and convenient. Optical yield sensor design is unaffected by changes in grain moisture, which simplifies calibration/startup and improves accuracy at the same time. It also makes it fast and simple to check moisture levels in a given field—and to change from one field to the next if percent moisture gets too high. Knowing where you stand. Real-time display monitor with bushels per acre and percent moisture eliminates surprises—and mistakes. SmartYield’s yield calculator also adjusts for moisture in the field so you know precisely where you stand before you get to the elevator.

Key Features and Benefits n Works seamlessly with Raven’s new Envizio Pro II field computer and Cruizer II guidance system for real-time yield monitoring during harvest n Records and displays bushels per acre and moisture content for calculating yields in the field for all major grains

n Non-contact optical sensor with hillside compensation ensures more accurate yield data, easier calibration and faster start-ups n Pre-set combine calibration numbers for even simpler start-up n Record keeping and coverage maps made simple with file formats for saving, reporting, and importing data

www.horvick.com

GPS Steering Systems Smartrax Steering System

Swath Smart Lightbar

Many hydraulic kits are already available for numerous models of tractors, sprayers and other vehicles. The Smartrax is expected to provide additional productivity for numerous field tasks like spraying, spreading, tillage and broad acre seeding.

The system features: nnRaven’s patented Swath Smart lightbar nn A Raven GPS receiver nn HydraSteer hydraulic steering kit nn Smartrax Controller nnA pass-to-pass accuracy of less than 9”, when coupled with a DGPS system, utilizing WAAS, Coast Guard Beacon or OmniStar signals. nn The Smartrax system does require a Raven Swath Smart lightbar, but will function with any GPS receiver that provides standard NMEA output.

Already Own A Raven Swath Smart Lightbar?

The Smartrax Steering System provides an upgrade path for current lightbar users, and makes steering technology available to a large number of growers and ag retailers.

Raven SmartSteer Assisted Steering System The Raven SmartSteer assisted steering system takes the stress out of driving—improve your operating efficiency and performance. Pair the SmartSteer with Raven’s Cruizer guidance system for a very affordable, quick-to-install steering system. Optional vehicle transfer kits make moving SmartSteer from cab to cab a breeze— and the steering wheel doesn’t even have to be removed. The direct gear drive found in SmartSteer is vastly superior to the friction wheel designs found on other assisted steering systems, completely eliminating unwanted slippage for improved accuracy and reliability— and it won’t pinch your fingers. SmartSteer is one of the quietest assisted steering products on the market.

1-800-373-4084

SmartSteer Features: nnOperating speeds up to 27 mph nnSimple to install and highly portable nnDirect mechanical gear drive nnInstant steering disengagement nnConvenient foot-pedal steering engagement nnBest-in-class line acquisition nnAutomated system calibration nnFour steering patterns nnCompatible with Cruizer, Envizio Pro, and Viper Pro NOTE: nnSmartSteer kit includes: SmartSteer MDU, CAN steering node, mounting hardware, and cabling. nnCruizer, Envizio Pro, or Viper Pro must be purchased separately from SmartSteer kit

Sprayer Electronics

The Smartrax Steering System is completely engineered by Raven. It utilizes Raven’s unique steering methods and Smart Bar technology to create excellent steering performance for an affordable price. These exclusive technologies, along with the 10 Hz update rate and superior navigation capabilities of the Raven GPS receivers, allow the system to operate effectively at speeds of up to 20 MPH. The system features simple start-up, ease of use, easy upgrade ability for current lightbar users, and superior line acquisition and on-line performance.

Call for application assistance and pricing.

HydraSteer Hydraulic Steering

Smartrax Controller

Electronic Sprayer Controls Raven SCS 440 Console Get The Latest Industry Standard

The Raven SCS 440 consists of a computer-based control Console, a Speed Sensor, a turbine type Flow Meter and a motorized Control Valve. The Console mounts directly in the vehicle cab for easy operator use.

Sprayer Electronics

Set the target volume per area to be sprayed and the SCS 440 automatically maintains the flow regardless of vehicle speed or gear selection. A manual override switch allows the operator to manually control flow for system check-out and spot spraying. Actual volume per area being applied is displayed at all times. The SCS 440 additionally functions as an area monitor, speed monitor, and volume totalizer. n 28 digit display n Digital pressure display (sensor required) n DGPS compatible for recording and variable rate application n Holds application rate regardless of speed or terrain

“It Puts YOU in l” ntro Total Co

n n n n n n n

Volume in tank Total area worked Field area worked Speed Distance Application rate Total volume used

SCS 440 Console Part # 063-0171-183

$1,582.00 M

SCS 440 Kits Kit below Includes: 1” flanged regulating valve, flanged flowmeter, 10’ console cable and 12’ end cable. Less Speed Sensor. Part # Console Flowmeter Speed Price SCS4A4-1P60P SCS440 RFM60P None $2,257.00 W Kit below Includes: 1” flanged regulating valve, flanged flowmeter, 10’ console cable and 12’ end cable. Less Speed Sensor. (3 wire boom style cables). Part # Console Flowmeter Speed Price SCS4A4-1P60P-B SCS440 RFM60P None $2,324.00 W

Raven SCS 450 Console 6-Boom Control

Raven’s SCS-450 consoles are the same as the SCS-440, except they have switches for up to 6 boom sections.

SCS 450 Kits Kit below Includes: 1” flanged regulating valve, flanged flowmeter, 10’ console cable and 12’ end cable. Less Speed Sensor. (3 wire boom style cables) Part # SCS450-1P60P-B

Console SCS450

Flowmeter Speed Price RFM60P None $2,497.00 W

SCS 450 Console Part # 063-0171-220

$1,819.00 M

100

www.horvick.com

Electronic Sprayer Controls Raven SCS 440 System Component Diagram

End Cables 115-0171-055

Extension Cables 115-0159-856 115-0159-857

Sprayer Electronics

Astro II GPS Based Speed Sensor 01415 1 Hz Sensor 01430 5 Hz sensor

12’ BV 24’ BV

12’ BV

Flow Extension Cables 115-0159-017 12’ 115-0159-019 24’

1-800-373-4084

101

Electronic Sprayer Controls

Electronic Sprayer Controls Raven SCS 11 Sprayer Control

Raven SCS 203 Sprayer Control

“Pressure Line Tubing” on Page 61

Single section control

3-section control

SCS-11

$302.00 M

The SCS 203 and SCS 11 Spray controls give convenient in cab control of pressure and boom shut offs. Each come with a 3/4” pressure regulator. The SCS 203 will control up to three individual boom sections, and the SCS 11 will control a single boom. Shut off valves sold separately.

Description On/Off switch Pressure Adjust switch PSI Gauge, Female Fitting

$429.00 M

SCS 202, 203 Replacement Parts

SCS 11 Replacement Parts Raven Part # 412-2011-038 412-2011-041 417-0001-004

SCS-203

Price $4.74 M $13.24 M $25.09 M

Raven Part # 412-2011-038 412-2011-037 417-0001-002 107-0159-025

Description Boom Switch Master Switch PSI Gauge, Female Fitting 12’ Ext. Cable Assembly

Price $4.74 M $6.41 M $25.09 M $92.00 M

Raven SCS 440 System Components Sprayer Electronics

Choose from the following to complete a control system:

n Console n Console cable n Flow control cable n Optional extension cables n Flowmeter n Regulating valve n Speed sensor or adapter

Choose a console! Find the right control valve! Select a flowmeter. Chart A: Cables Part #

Description

Price

SCS440/450 series consoles -solenoid wiring 115-0159-418 115-0159-404 115-0159-405 115-0159-708 115-0159-409 115-0159-414

10’ Console Cable End Cable, 6’ End Cable, 12’ End Cable, 24’ 12’ Extension 24’ Extension

$238.00 $151.00 $188.00 $363.00 $172.00 $210.00

Description

Price

SCS440/450 series consoles -6 boom wiring M M M M M M

SCS440/450 series consoles -3 wire valve wiring 115-0171-085 10’ Console Cable* $260.00 M 115-0159-858 6’ End Cable $196.00 M 115-0171-055 12’ End Cable $252.00 M 115-0159-856 12’ Extension Cable $242.00 M 115-0159-857 24’ Extension Cable $267.00 M *085 cable has weatherpack power adapter for powering up Raven Radar

102

Part # 115-0171-085 115-0159-495 115-0159-496 115-0159-708 115-0171-086 115-0171-129

10’ Console Cable* 6’ End Cable 12’ End Cable 24’ End Cable 6’ End Cable 12’ End Cable

$260.00 $153.00 $203.00 $363.00 $252.00 $292.00

M M M M M M

1 boom shutoff with ends for new style shutoff valve 115-0171-085 10’ Console Cable $260.00 115-0171-800 End Cable, 12’ $284.00 115-0159-856 Extension Cable, 12’ $242.00 115-0159-857 Extension Cable, 24’ $267.00 The above cables are for the new style NH3 kits with the valves that have the Connexall type wire adapters.

M M M M

NH3 Specific

www.horvick.com

Speed Sensor Cables Radar Speed Sensor Interface Cables

AA Vehicle Type

Part #

Raven

Y-cable Ford Gen./New Holland John Deere Forn Gen./Vers./New Holland

115-0159-472 115-0159-754 115-0159-550 115-0159-709

Dickey-John/ Vansco

John Deere 30 Series*** 115-0171-670 John Deere** 115-0159-519 JD 7000/8000/9000 115-0159-700 Case-IH ** 115-0159-517 Case MX or STX* 115-0171-304 New Holland TG* 115-0171-304 Cat Challenger ** (Models 65 & 75) 115-0159-518 (Models 65C & 75C) 115-0159-627 (Models 65D,75D,85D) 115-0159-627 (Row Crop 35,45,55) 115-0159-627 Ford/White/Agco Allison** 115-0159-529 Caterpillar 115-0159-580 Other 115-0159-526 Magnavox John Deere 115-0159-519 * with convenience port ** 1990 model year with factory installed performance monitor *** 7pin JD connector

Monitor Length Connnector AA A

“Y” Connectors B M-N

Price $117.00 $131.00 $131.00 $210.00

M M M M M M M M M M

20ft.

M-N

A A A A

6ft. 20ft. 6ft. 20ft. 6ft. 6ft.

O I-J K-L I-J

$129.00 $156.00 $144.00 $172.00 $227.00 $227.00

A A

20ft. 20ft.

E-F G-H

$264.00 M $184.00 M

10ft.

C-D

A A

3ft. 20ft.

C-D I-J

$167.00 $115.00 $138.00 $156.00

M M M M

Raven Speed Extension Cables Part # 115-0159-032 115-0159-018

Description 12’ Speed Extension 24’ Speed Extension

Price $98.97 M $107.00 M

Cables for Raven SCS450/460 series consoles

Item Description 10’ console cable 6’ end cable 12’ end cable 12’ end cable 3 section NH3 12’ end cable 6 section NH3 12’ extension cable 24’ extension cable

Solenoid Style 115-0159-418 115-0159-404 115-0159-405 — — 115-0159-409 115-0159-414

1-800-373-4084

Sprayer-3 boom

Ball Valve Style Sprayer-6 boom

NH3

115-0171-085 115-0171-085 115-0171-085 115-0159-858 115-0171-086 — 115-0171-055 115-0171-129 115-0171-800 — — 115-0171-836 — — 115-0171-838 115-0159-856 115-0159-856 115-0159-856 115-0159-857 115-0159-857 115-0159-857 The ball valve style has a 16 pin connector, and has power cable to run the 3-wire ball valves.

103

Sprayer Electronics

Radar Type

Raven Precision Products Chart B: Flowmeters – Choose one:

RFM-15 .3-15 GPM poly 1-1/4” FPT Banjo 200 Series Flange 063-0172-040 ................. $390.00 M

RFM-60S 1-60 GPM Stainless Steel 1-1/2” FPT 063-0171-666 ................. $836.00

RFM-100 5-100 GPM M220 flanged connection 063-0171-066 ................. $857.00

RFM-60P 1-60 GPM poly Banjo 200 Series Flange 063-0171-793 ................. $533.00

1/4” Stainless steel regulating valve (use for low flow NH3) 063-0172-173.................$598.00 M

1” Carbon steel regulating valve (NH3 and high pressure spraying) 063-0172-977* ............... $641.00

1” Carbon steel on/off valve 063-0172-978* ............... $634.00

1” Carbon steel Fast valve 063-0172-979* ............... $724.00

Sprayer Electronics

Chart C: Control Valves – Choose one:

3/4” Poly regulating valve 063-0171-120 ................. $213.00

1” Poly regulating valve (Flanged) 063-0172-125 ................. $348.00 M 1-1/2” Poly regulating valve Banjo 200 Series Flange 063-0171-894 ................. $390.00

Section control requires part # 063-0173030 Check Assembly

1-1/4” Carbon steel regulating valve (NH3 and high pressure spraying) 063-0173-202* ............... $690.00 M 1-1/4” Carbon steel on/off valve 063-0173-203* ............... $690.00

1-1/4” Carbon steel Fast valve 063-0173-204* ............... $766.00

* New style with Connexall ends. Requires adapter cable when using with old style cables.

Adapter Cables

Replacement Motor

For new style Control Valve/Fast Valve 115-0171-807 .................... $87.82 M

For new style Control Valve Valve 063-0172-980 ................. $374.00 M

For new style On/Off Valve 115-0171-808 .................... $87.82

For new style On/Off Valve 063-0172-981 ................. $414.00

For new style Fast Valve 063-0172-982 ................. $457.00

Electra-Halt Repair Kit Part # RKC23...................................................... $51.00

104

www.horvick.com

Raven NH3 Control Raven AccuFlow nn30 GPM horizontal mount cooler, nnStainless steel flowmeter, nnMounting brackets and all plumbing nn1-1/4” control valve, shut-off valve nn1-1/2” out

NH3 Kit with SCS440 Serial Port Console (less Speed Sensor)

Single Valve System RAV-NH3-FV............................................... $4,832.00

(less Console or Speed Sensor)

Single Cooler, Dual Valve, Four 1/2” Vapor Tubes AFK-SNG-STD-12........................................ $4,023.00

Single Cooler, Dual Valve, Two 3/4” Vapor Tubes AFK-SNG-STD-34........................................ $3,987.00

Single Cooler, Single Valve, Four 1/2” Vapor Tubes AFK-SNG-FV-12........................................... $3,778.00

Single Cooler, Dual Valve, Two 3/4” Vapor Tubes AFK-SNG-FV-34........................................... $3,742.00

NH3 Dual Cooler Kits

(less Console or Speed Sensor) Dual Cooler, Dual Valve, Four 1/2” Vapor Tubes AFK-DUAL-STD-12...................................... $5,283.00

Dual Cooler, Dual Valve, Two 3/4” Vapor Tubes AFK-DUAL-STD-34...................................... $5,211.00

Dual Cooler, Dual Valve, Four 1/2” Vapor Tubes AFK-DUAL-FV-12........................................ $4,923.00

Dual Cooler, Dual Valve, Two 3/4” Vapor Tubes AFK-DUAL-FV-34........................................ $4,852.00

Raven AccuFlow HP™ AccuFlow HP (High Performance)

The new AccuFlow HP system runs at higher speeds and colder temperatures than ever before. Paired with your Raven control system, AccuFlow and AccuFlow HP super cooling NH3 technology gives you superior accuracy and control over your applications

Fast Valve Part # 117-0171-330

2-Valve Part # 117-0171-329

Call For Pricing

1-800-373-4084

nnIndustry-first variable speed pump for incredible efficiency, tractor power savings of up to 10 horsepower (Patent Pending) nnAdvanced system design for running at faster application speeds and colder temperatures nnNearly double the system capacity nnSuper cooler technology for maintaining the right temperature

105

Sprayer Electronics

Dual Valve System RAV-NH3-30-60S........................................ $5,262.00

NH3 Single Cooler Kits

Raven Injection Raven SCS-Sidekick Add-on Direct Injection System Ever-increasing chemical costs, mixing inconveniences, and safety concerns make direct injection of chemicals an attractive alternative to traditional tank mixing.

The Raven SCS-Sidekick provides an affordable direct injection solution.

The SCS-Sidekick is an affordable, direct injection add-

Sprayer Electronics

on to any existing RAVEN single product control console. The SCS-Sidekick enables current RAVEN console owners to gain precision injection capabilities without purchasing replacement consoles, cables, etc. The SCS-Sidekick console installs with great ease. Simply route the cabling through the cab and out to the module, attach the console to the existing RAVEN console, power-up, program and go! The SCS-Sidekick console has several user-friendly programming features and non-volatile memory to retain programmed values in the event of a power loss. All system information is available at the touch of a button. SCS-Sidekick High Volume w/24 gallon tank Part # 117-0159-915

Sidekick with tank, mixer and check valve Part # SKI-N-SER-WT

SCS-Sidekick High Volume less tank Part # 117-0159-916

Sidekick with out tank, mixer and check valve Part # SKI-N-SER-W/OT

$4,352.00 W

$3,916.00 W

$4,662.00 W

$4,227.00 W

Optional Mixing Chambers Part # 063-0159-632 063-0171-300 063-0171-303

Description Price 1-1/4” polypropylene mixing chamber $149.00 M 2” polypropylene mixing chamber $168.00 M 1” polypropylene mixing chamber $153.00 M

Check Valves Part # 333-0011-078 333-0011-088 333-0011-090 333-0011-091 333-0011-093

Description Price .5 PSI check valve, 3/8” stainless steel $107.00 M Check valve, 1/2”, 8 GPM $48.79 M Check valve, 1”, 14 GPM $75.28 M Check valve, 1-1/4”, 22 GPM $92.00 M Check valve, 2”, 70 GPM $230.00 M

106

The SCS-Sidekick injection module is supplied without a tank to allow freedom to choose tank shape and capacity. The module can also be supplied with a tank (8, 16 or 24 gallon capacities) which creates a convenient all-in-one injection package. The injection module has been designed with a small footprint, reducing area needed for mounting.

Key Features n SAVES MONEY by reducing chemical waste. n SAVES TIME by eliminating tank mixing and rinsing. n PRECISION CONTROL with up to 7 boom inputs and the accuracy of a RAVEN control system. n DEPENDABLE RAVEN positive displacement pump with direct drive (no setting adjustments).

n DIRECT INTERFACE with any RAVEN single product control console. n EASY INSTALLATION consisting of a console, two cables and an injection module. n VERSATILE SYSTEM with high and low volume capabilities (10-200 oz/min and 5-100 oz/ min). n COMPACT DESIGN minimizes occupied space in the cab and on the sprayer.

www.horvick.com

TeeJet® Guidance Systems TeeJet® CenterLine 220 Compact Guidance For Any Application

$1,095.00 W

Matrix™ Guidance Guidance like you’ve never seen before.

Matrix™ with RealView Guidance Over Video – Only from TeeJet Only system that displays guidance and video simultaneously:

n Blends animated guidance information with real video image on a single display to improve accuracy n Ideal for monitoring hard-to-see machine operations n Choice of guidance over video, guidance only or video only

Matrix 570 and 840 Benefits: n Precise accurate guidance in all terrains n Easy-to-use 3D graphical guidance n Coverage mapping/data export; import coverage data into Google Earth for realistic area view n Economical add-ons

n BoomPilot® automatic boom section control n FieldPilot® assisted steering n Tilt Gyro Module n Antenna upgrades n Outstanding value – competitively priced with more features

VIDEO CAMERA ASSISTED STEERING COLOR 3-D GUIDANCE AUTOMATIC BOOM CONTROL

Choose Matrix 570 or 840: Matrix 840: n Compact, bright, daylight, nighttime readable 8.4” screen – 200% more viewing area than Matrix 570G and an even brighter display n Works with up to 8 cameras n Split-screen 4 camera view

Call For Pricing!

1-800-373-4084

Matrix 570: n Compact, bright, daylight, nighttime readable 5.7” screen –80% brighter than competitive screens n Works with up to 4 cameras

107

Sprayer Electronics

n Versatile GPS guidance in a compact, portable package n Traditional lightbar guidance plus a graphical display provide complete guidance information n High-quality Internal GPS engine with external antenna n Straight-line (parallel) and curved AB guidance modes n Return to point feature Durable, sealed rubber keypad Provides RADAR-like speed signal for use with other control systems that require a speed signal

CenterLine 220 Part # 90-02399

Monitors & Controllers The Generation of LOW PRICED Monitors & Sprayer Control Systems from Micro-Trak…Tougher…More Reliable…Expanded Capabilities

Micro-Trak Automatic Rate Controllers New Features

Standard Features

n Flash memory for simple customization n Built-in capability for future VRA n Added NH3 and Turf units n Records area and volume in 3 independent pairs of counters so individual jobs may be tracked n Tank counter shows amount remaining in tank n Inline/bypass for servos

n On-the-go rate adjustment n Push-button auto/manual feature for spot treatments n Minimum flow feature to ensure proper application pattern as ground speed slows to extremes n Precise rate control regardless of field variables n Solenoid and ball valve compatible n Flow-based control

Sprayer Electronics

MT-3405F II Dual Display

5 boom Part # 01240

$1,807.00 V 5 boom (less speed sensor) Part # 01172

$1,666.00 V

n Controls electric and hydraulic valves/motors n Compatible with radar ground speed sensors n Compatible with Micro-Trak NH3 Kits for precise NH3 application control n Standard Equipment—3/4” Flowmeter, 1” servo valve, Hall effect speed & flow sensors, mounting hardware and weatherproof connectors.

SprayMate II

Automatically maintains a preset application rate for both liquid chemicals and anhydrous.

All-in-one automatic rate controller for spray and NH3 at a VERY affordable price!

n Dual display readout provides uninterrupted application rate n Heavy-duty console with built-in boom controls for up to 5 separate boom sections n FTW model available for use with porportional shutoff valves n Audible alarm now available

n All-in-one design with built-in controls for up to 3 separate booms sections n Master control switch standard (Optional on/ off power switch)

3 boom Part # 01340

$1,482.00 V 3 boom (less speed sensor) Part # 01171

$1,322.00 V

ProPlant - Automatic Seed Rate Controller Turn your planter into a precision machine...

The ProPlant features:

Hydraulic Set up ProPlant Console Part # 01204 ................ $1,307.00

108

n Three pre-set seed rates (user programmable) n On-the-Go seed rate adjustment n Standard bracket fits most planters n Simple to set up; easy to use! n VRA seeding capability n Less than 3 gallons of hydraulic flow required per planter section n Auto Section Control n As Applied Maps n Wireless Remote Control makes calibration a one-person task n Eliminates the inaccuracies of a drive wheel

www.horvick.com

Monitors & Controllers Micro-Trak Calc-An-Acre The original low cost acre counter has been completely redesigned. You still get the easy setup and operation that made Calc-An-Acre famous, but now you get even MORE for your money. Calc-An-Acre incorporates a dual counting system that makes it possible to reset and record individual fields while maintaining a running total of area worked. Calc-An-Acre is also a digital speedometer that provides true ground speed.

CALC-AN-ACRE

$367.00 V

n Hall effect Speed Sensorimproves dependability through longer service life n Push-button Run/Hold n Weatherproof Cable Connectors n Width Reduction Functionprovides the ability to accurately measure the effective coverage area when boom sections are switched off

Micro-Trak Shaft-Trak Monitor

EMD Electric Pump Driver

n Use for a wide range of applications. It monitors what your eyes can’t n Eliminates unseeded areas n Monitors up to 6 independent shafts simultaneously n Save money & time by seeding once

Use the EMD with any of Micro-Trak’s rate controller to vary the speed of a 12 vdc diaphragm pump. It replaces the servo valve, and gives auto rate control for low volume applications. Part # 01757 40 amps max

$528.00 V

Factory Trained Service Center for Micro-Trak

Part# 01330 01331 01332 01333 01334 01335

Description 1 sensor 2 sensors 3 sensors 4 sensors 5 sensors 6 sensors

Price $468.00 V $538.00 V $566.00 V $613.00 V $663.00 V $711.00 V

Micro-Trak Direct Connect Adapters

Automatic Section Control

Micro-Trak’s Liquid and NH3 Kits are now COMPLETLY compatible with all Major controllers in the industry

n NEW! Micro-Trak’s Automatic Section Control (ASC) Cables. n Makes late model Micro-Trak controllers compatible with third party ASC. n Used with or without VRA Mapping controllers. n Compatible with TOPCON X20, John Deere GS2, Raven 440/450 and Trimble EZ Boom 2010 and AgLeader INSIGHT.

n TOPCON - X20, X15 and X10 n John Deere - GS2 n Trimble - EZ Boom 2010 n Raven - 440, 450 n AgLeader - INSIGHT n In addition Micro-Trak’ s Seed Rate Drives and Adapter Cables are FULLY compatible in the field.

1-800-373-4084

109

Sprayer Electronics

n LCD readout- large, easy-to-read numbers n Heavy-duty Rotary Switchoversized knob makes function selection quick and sure n Area Per Hour and Accumulate Hour Functions- tracks progress and provides an accurate record for maintenance and work planning

Micro-Trak NH3 Micro-Trak Automatic NH3 Rate Control

Have Adapters For: Raven, John Deere, Topcon, Trimble, AgLeader

For Anhydrous Application

Accurately control a predetermined rate, regardless of changing ground speeds and tank pressures. This system takes the guesswork out of applying anhydrous ammonia.

For A Complete System Select From A, B, C and D A – Controller 01144 01244 01342 01783

MT-NH3 II Console Kit for NH3 MT-3405F II Console Kit for NH3 SprayMate II Console Kit for NH3 SprayMate Plus Console Kit for NH3

$750.00 $973.00 $632.00 $926.00

V V V V

B – Speed Sensors 01410 01425

Astro II GPS Speed Sensor (1 Hz) Astro 5 GPS Speed Sensor (5 Hz)

$336.00 V $453.00 V

C – NH3 Harness Kits

Sprayer Electronics

Single Section Kits 01790 01791 01792 01793

MT-NH3/MT-3405D Channel-2 NH3 Harness Kit SprayMate NH3 Harness Kit MT-2405 NH3 Harness Kit MT-3405/9000/3405D Channel-1 NH3 Harness Kits

$257.00 $309.00 $550.00 $339.00

V V V V

Multi Section Kits

(Up to five section shutoff valves can be added – valves not included) 01795 01796

SprayMate NH3 Multi Section Harness Kit MT-3405/9000/3405 D Multi Section Harness Kit

$700.00 V $814.00 V

D – Liquifier Kits (Includes Liquifier cooler, vapor tubes and associated hardware)

Electronics

01816 01817 01818

Includes: n Stainless steel NH3 flowmeter n Stainless Steel NH3 electric servovalve n Electric shut-off valve n All required hardware (including strainer, brackets and harness) and tubing

110

Liquifier Junior NH3 Kit, 1000-6000 lbs. NH3/hr Liquifier NH3 Kit, Up to 12000 lbs. NH3/hr Liquifier Max Kit, Up to 21,000 lbs. NH3/hr

$3,337.00 V $4,456.00 V $9,892.00 V

Section Control Valve (For additional control. Liquifier kits come with one) 17972

KZ NH3 Shutoff Valve, 1”

$695.00 V

www.horvick.com

Blockage Monitor Whirlwind™ Blockage Monitor The Multi Function Controller, which will replace all your monitors and controllers! Part #

Description

Console Kit 01375

Whirlwind console kit

Blockage Monitoring 01376 01377 01378

Sensor. No hose cutting required! WHY DO YOU NEED A WHIRLWIND™?

Bin Level Monitoring 01382 01544

Bin Level Module Kit Bin Level sensor Kit

Fan RPM Monitoring

01381 Fan Sensor Module Kit 01539-MT Hall-effect RPM Sensor Kit 14536 Shaft Adaptor Kit w/10 magnets

Shaft RPM Monitoring

01380 Shaft RPM Module Kit 01539-MT Hall-effect RPM Sensor Kit 14536 Shaft Adaptor Kit w/10 magnets

Optional 01535

Run/Hold Kit

$682.00 V $381.00 V $75.00 V $75.00 V $340.00 V $96.00 V $329.00 V $85.75 V $47.12 V $339.00 V $85.75 V $47.12 V $127.62 V

7 Pin Extension Cables — See Page 114

Whirlwind System Diagram

16 sensors per module 16 modules maximum including RPM and level module Up to 2 fan RPM modules (2 inputs each) Up to 2 shaft sensor modules (2 inputs each) 1 Bin level sensor module (4 inputs) NOTE: Will not work on black Concord hose.

1-800-373-4084

111

Sprayer Electronics

n It provides immediate notification of plugged runs and manifolds n It is a “snap” to install n The Whirlwind system is not affected by dust or seed treatments, so maintenance downtime is eliminated n Its sensors are NOT in the product flow; they won’t cause blockages or wear out n It scans every run, all the time. n The Whirlwind system monitors up to 256 seed or fertilizer tubes.

Blockage Module Kit 1” Sensor Kit 1 1/4” Sensor Kit

Price

New Monitors SprayMate+ Rate Controller

Electronics — Controllers

n Selectable servo drive options, standard (DC) servo and Pulse Width Modulation (PWM) n User override of GPS/Mapping Controller to apply a rate above or below the prescription rate or override Target Hold. n Standard or FTW (Flow Three Way) section valves. n 3 expanded data sets include volume, area, distance, average and highest velocity and data set start time/date stamp.

n Warning messages for No Speed and No Flow while in automatic control and Application Rate position. n The SprayMate Plus operates in NH3 or H2O applications modes in Metric, English or Turf unites. n Tank size can be entered for quick reset of Tank Level. A tank level can be set to generate an alarm.

Sentry 6120 Real Time Droplet Size Monitor Provides real time operating pressure and corresponding droplet size category feedback for liquid applications

Features: n Bright 3.5 inch backlight adjustable touch screen. n Image-based Tip Series and Tip Capacity settings allow for simple one-touch selection to choose your spray tip. n Tip Capacity selection setting uses ISO color coding as well as text for easy identification and selection. n Low and High pressure alarms alert operator when system pressure deviates from operator-set limits. n Save up to five spray tips to your “favorites” for quick setting retrieval — preloaded with popular TeeJet tips. n Upgradable trough USB port.

Sentry 6140 Top Flow Monitor Identifying Plugged Spray Tips Has Never Been Easier

Benefits and Features

Individual sensors monitor flow of each nozzle The Sentry 6140 Tip Flow Monitor provides a simple, reliable solution to this age-old problem. Flow sensors, mounted at each spray tip location, precisely measure the flow passing through the tip and provide instantaneous feedback to the operator should a tip become clogged, lost, or a nozzle body unintentionally rotated to an incorrect position.

112

n Individually monitor flow performance from every spray tip on your boom n Sentry 6140 utilizes a compact flow meter integrated into the individual nozzle body n Flow meter detects flow variation caused by clogs, nozzle damage or loss, or upstream flow limitations n Deviation from the average flow rate of the rest of the system will trigger an alert to the operator n Error is indicated by audible alarm, display notification and illuminated LED at the affected nozzle body n Bright 3.5 inch backlight adjustable touch screen.

www.horvick.com

Flowmeters & Servo Valves Micro-Trak Flowmeters Flowmeter Parts Part # 14836 13783 10137 11277

FM-750 Flowmeter

FM-750 Poly Flowmeter

Use With Turbine (FM-750-N/750-SS) O-ring (FM-750) Gasket (FM-750-N/750-SS) Bearing Rebuild Kit (FM 750N-SS)

Price $94.15 V $16.90 V $5.15 V $60.71 V

FM-750 Flowmeter

.5-5 GPM

O-ring #11503

Housing FM750 GFN #20294 Turbine #14836

FM-500 Flowmeter

Flowmeters Part # FM-500 FM-750* FM-750-SS FM-750-N

Size (Capacity) 1/2” Poly (.5-5 GPM) 3/4” poly (2-40 GPM) 3/4” stainless steel (2-40 GPM ) 3/4” NH3 (2-40 GPM)

Price $321.77 V $329.68 V $659.62 V $669.95 V

FM750-N & -SS Flowmeter

*Standard sprayer

Gasket #10137

Flow Sensor Cables Part # 10132 10417 13096

Use With Flow Trak MT-3000/5000 MT-2400/MT-3400/MT-9000

Price $68.88 V $57.65 V $80.33 V

Housing FM750SS Housing FM750SS

Turbine #14836

Shut-Off Valves 1” NH3 shut-off Part # 17972

$695.00 V

Seal Kits Jamesbury Part # 14913

Servo Valves 1” poly servo 150 PSI (pictured) Part # 14928

$278.00 V

1” NH3 Servo Valve Part # 14958

$999.10 V

$251.25 V

1-800-373-4084

113

Electronics — Controllers

Housing FM750 GFN #20294

MT-Cables & Y-Cables Extension Cables - WeatherPack

Magnetic Speed Sensor Cables Part # Use With 10074 Calc/Flow/Yield (Old Styles) 10416 MT-3000/5000 13096 MT-2400,MT-3400, Flow-Trak & Calc-an-Acre (New Styles)

Price $67.69 V $45.11 V $80.33 V

Radar Interface Kits

For new style consoles to other brand radars Part # 12953 14214 14215 14219 14221 14222 01550

Description John Deere 2 pin connector In-cab JD M/P connector Dickey-john AMP connector (round) Dickey-john Packard connector (square) Raven 3 pin connector In cab JD M/P connector w/ Y cable Universal kit-requires wire splicing

Price $48.31 V $79.00 V $121.00 V $121.00 V $121.00 V $121.00 V $151.60 V

Main Wiring Harness

Electronics — Controllers

Part #

Description

Price

10415 MT-3000 11039 NH3 MT-3000

$304.66 V $251.50 V

ounting Accessories M Part # Description 10012 Speed sensor magnet 10422 Console bracket MT-3000/5000 10423 Console mount knob

Price $1.85 V $15.22 V $6.34 V

Part # 10450 10449 10876 10829 11462 11050 11051 11052

Description 3-pin 5’ extension 3-pin 10’ extension 3-pin 15’ extension 3-pin 20’ extension 3-pin 25’ extension 6-pin 5’ extension (NH3) 6-pin 10’ extension (NH3) 6-pin 20’extension (NH3)

Price $46.23 V $51.82 V $59.09 V $65.38 V $71.56 V $83.74 V $103.82 V $145.63 V

Extension Cables (New Style Consoles) MetroPack Part # 13200 13201 13202 13203 13204 13205 13206 13207 13208 13209 14146 14147 14103 14236 14237 17415 13220 13221 13222 13223 13224

Description 2-pin 5’ M/P extension (1.5m) 2-pin 10’ M/P extension (3m) 2-pin 15’ M/P extension (4.6m) 2-pin 20’ M/P extension (6.1m) 2-pin 25’ M/P extension (7.6m) 3-pin 5’ M/P extension (1.5m) 3-pin 10’ M/P extension (3m) 3-pin 15’ M/P extension (4.6m) 3-pin 20’ M/P extension (6.1m) 3-pin 25’ M/P extension (7.6m) 7-pin 5’ M/P extension (1.5m) 7-pin 10’ M/P extension (3m) 7-pin 15’ M/P extension (4.6m) 7-pin 20’ M/P extension (6.1m) 7-pin 25’ M/P extension (7.6m) 7-pin 50’ M/P extension (15.2m) 10-pin 5’ M/P extension (1.5m) 10-pin 10’ M/P extension (3m) 10-pin 15’ M/P extension (4.6m) 10-pin 20’ M/P extension (6.1m) 10-pin 25’ M/P extension (7.6m)

Price $44.84 V $48.40 V $52.31 V $54.61 V $59.08 V $49.54 V $52.89 V $59.46 V $63.24 V $67.50 V $117.63 V $170.18 V $220.10 V $267.49 V $312.04 V $551.82 V $86.10 V $102.82 V $117.57 V $140.83 V $165.95 V

Radar Interface Y-Cables

DICKEY-john Packard/Magnavox

DICKEY-john Ford

DICKEY-john Amp

Raven

DICKEY-john Cannon 00177

TRW 11531 (00146)

In-Cab John Deere (8000/9000)

DICKEY-john Deutsch

114

www.horvick.com

Dickey-john Moisture Testers MINI GAC® and MINI GAC® PLUS Grain Moisture Analyzer Unsurpassed “Grain trade” accuracy in a handheld grain moisture analyzer.

Benefits for Farming

Two versions:

nnThe mini GAC plus measures moisture and test weight nnFast Easy Accurate nnUses U.S. Federal Standard Technology nnNO screw cap which can damage grains, create oily residue, and are cumbersome to use

nnMINI GAC - for highly accurate moisture testing. nnMINI GAC plus - the ONLY handheld moisture tester that measures accurate test weight. Part # MINI GAC

$411.50 C

Part # MINI GAC PLUS Part # MINI GAC ACCPK

nnMenu-driven operating system nnAn internal scale (no pre-weighing) nnUSB compatibility for calibration loading nnTest weight readout (mini GAC plus) nnUsed for over 450 grains and products nnAutomatic temperature compensation

$65.58 C

GAC500™ XT Grain Analysis Computer Get elevator quality grain testing before you leave the field. DICKEY-john’s GAC500 XT brings a whole new level of accuracy to on-farm grain moisture testing. Using technology based on DICKEY-john’s industry standard GAC2100 commercial analyzers, the GAC500 XT provides producers with highly precise test results in an economical package.

The GAC500 XT features: nnEight grain memory nnAutomatic moisture and temperature reading nnApproximate test weight reading nnUpdateable calibrations: 16, user defined nn LCD display 128 x 64 pixels nnConnects to printer

Part # GAC500XT

$2,070.00 C

Specifications: nn Cereals, oilseeds, grass seeds, vegetable seeds, edible beans nn Moisture Range: 5–45% nn Grain Temperature: 0–50°C (32–122°F) nnAutomatic grain temperature compensation nn Operating Temperature: 5–45ºC (41–113°F) nn Humidity: 5–95% non-condensing nn Power Supply: – Wall mount adapter – 6-volt vehicle adapter: 12-24 VDC

GAC®2100 AGRI Grain Analysis Computer Economical with top of the line accuracy. The GAC®2100 Agri provides grain testing results in just 32 seconds and has the ability to store eight grain calibrations. Part # GAC2100AG

$3,422.00 C

1-800-373-4084

The GAC2100 AGRI features: nnQuick, fully automated grain testing nnEngineered with advanced technology nnConsistent moisture, temperature, and test weight results nnUse for cereals, oilseeds, grass seeds, vegetable seeds, and beans nnConnects to printer

Specifications: nn Moisture Range: 5–45% nn Grain Temperature: 0–50°C (32–122°F) nnAutomatic Grain Temperature Compensation nn Operating Temperature: 5–45ºC (41–113°F) nn Humidity: 5–95% non-condensing nn Power Supply: 120 VAC

115

Moisture Testers

$637.50 C

MINI GAC and MINI GAC PLUS features include:

TeeJet® Caps & Adapters Quick TeeJet® Spray Tips Order by part number. For cap and gasket sets or for caps only, please also specify a number for color as follows: Use the chart to the right.

19438-EPR (EPDM Standard) 19438-VI (Viton Optional)

Cap

For Use With Spray Tips

Size

TeeJet Flat Spray Tips

Standard Drift Guard LP (brass+stainless steel) Turbo TeeJet XR flat fan Standard Standard LP (brass) LP (stainless steel) XR flat fan

(smaller capacities)

TeeJet Flat Spray Tips (larger capacities)

TJ Twin Jet

AI TeeJet

Turbo FloodJet

Spray Tips

Example: for cap and gasket 25612, in blue, the part number would be 25612-4.

StreamJet

TK-VS FloodJet

FL FullJet

TG Full Cone

TK FloodJet

Part # 19438-EPR 19438-VI 18999-EPR

QJ1/4T-NYB w/o check valve 300 PSI

Desc. M 1/4” NPT F 1/4” NPT

Price $2.89 H $2.89 H

Desc. FNT Gasket

Description standard EPDM viton EPDM, disc-core

25610-x $1.22 H

—

25597-x $0.88 H

25598-x $1.22 H

—

25599-x $0.88 H

25600-x $1.22 H

—

25607-x $0.88 H

25608-x $1.22 H

—

25607-x $0.88 H

Part # QJ4676-14

Part # 19843

$4.70 H

116

$2.36 H

Part # QJ4676-18 Part # QJ4676-45-14

Price $5.40 H $1.93 H

Price $0.51 H $2.21 H $1.15 H

Plug Cap

$2.46 H

—

Screens are on Page 122

Adapter Cap

$3.74 H

QJT-NYB 300 PSI Part # QJT-NYB 20266

25609-x $0.88 H

Cap Gasket

Adapters

Part # QJ1/4TT-NYB QJ1/4T-NYB

Cap & Gasket 25612-x $1.08 H

TX ConeJet disc core (insert core into seal)

QJ1/4TT-NYB w/o check valve 300 PSI

Part # (cap only) 25611-x $0.77 H

0067-08 01 to 04 01 to 05 01 to 08 01 to 08 10 to 20 05 to 20 06 to 20 06 to 20 10 to 15

Turbo TeeJet Ind.

Cap color chart Black............. 1 White .......... 2 Red .............. 3 Blue ............. 4 Green .......... 5 Yellow ......... 6 Brown .......... 7 Orange ......... 8 Violet .......... 10

Part # QJ4676-90-14

$4.70 H

Part # QJ90-1-NYR 90 Degree QJ Adaptor

$4.70 H

Part # 55240-CELR Hardi TeeJet

$2.89 H

www.horvick.com

Nozzle Bodies Nozzle Bodies

Adapters

QJ7421 without check valve 300 PSI

QJ8360 with check valve 300 PSI

Part # Desc. Price QJ7421-12-NYB 1/2” $4.26 H QJ7421-34-NYB 3/4” $4.26 H QJ7421-1-NYB 1” $4.26 H

Part #

Desc.

QJ8360-NYB

1/4” MNPT

QJ8355 with check valve 300 PSI

QJ22187 with check valve 300 PSI Part # Desc. Price QJ22187-12-NYB 1/2” $10.76 H QJ22187-34-NYB 3/4” $10.76 H QJ22187-1-NYB 1” $10.76 H

Swivel-Jet

Priced Without Caps! 3/4” nozzle body Part # 40155..................... $16.88

1” nozzle body Part # 40157..................... $16.88

1-800-373-4084

QJ8355

F-1/4” NPT

Price $10.66 H

Part # Desc. QJT8360-NYB FNT 20266 Gasket

Price $5.75 H $1.93 H

NOTE! These Chem-Saver® drip-free shut-offs require 10 PSI at the nozzle to open check valve.

Price $4.60 H $4.60 H $4.60 H

Ag-Chem® Nozzle Bodies

4 # Part # Description 1 48223-NYB Upper Clamp, 7 6 1/2” Blk. Nylon 48221-NYB Upper Clamp, 3/4” Blk. Nylon 48222-NYB Upper Clamp, 1” Blk. Nylon 5 2 48256-SS Pivot Pin, Stainless Steel 3 48496-NYB Body, 1/2” Blk. Nylon 48498-NYB Body, 3/4” Blk. Nylon 48499-NYB Body, 1” Blk. Nylon 4 7717-2-110-BU O-ring, Buna-N 7717-2-110-VI O-ring, Viton (optional) 5 48255-1 1/4-302SS Screw, Stainless Steel 6 21953-EPR Diaphragm, EPDM 21953-VI Diaphragm, Viton (optional) 7 21950-10-NYB End Cap Sub-Ass’y, Blk. Nylon 7 21950-2 End Cap Sub-Ass’y, Yellow

Desc.

These nozzle bodies are used on most RoGators. 3 way nozzle for multiple tips. Select 3/4” or 1” size. nnAll nylon construction nn175 PSI nn10 PSI shut off

Part # Pipe Size 519524 3/4” 519562 1”

Price ea $16.25 H $16.25 H

Replacement Parts Ag-Chem Part # 609918 609738 609741

Ref. # 1 1 2 2 3 4 5 6 7 8 9 10 — —

Hypro/Precision Description Part # 400040-030 Clamp O-Ring 4200-0004E EPDM Diaphragm 400101-DH Screw/Nut 403000-050 Body O Ring

Part # 40155-1 40157-1 40155-2 40157-2 40155-3 40155-22 40155-7 40155-12 40155-9 40155-10 40155-11 25611-1 19438-EPR 19438-VI 40162 40163

Description upper clamp, 3/4 in. upper clamp, 1 in. main body, 3/4 in. main body, 1 in. dual body diaphragm assembly diaphragm (fairprene) diaphragm (viton) O-ring (buna-N) screw swivel screw cap (specify color) gasket, EPDM gasket, viton 1” body adaptor tee 1” body adaptor

Price ea. $0.55 H $0.55 H $1.25 H $0.55 H

Price $1.67 H $1.67 H $7.01 H $7.01 H $4.69 H $4.00 H $0.82 H $2.90 H $0.27 H $0.33 H $0.31 H $0.77 H $0.51 H $2.21 H $2.59 H $2.72 H

117

Spray Tips

Parts breakdown QJ17560

Part #

QJT8360-NYB – 300 PSI

QJ17560 with check valve 300 PSI Part # Desc. QJ17560A-12-NYB 1/2” QJ17560A-34-NYB 3/4” QJ17560A-1-NYB 1”

Price $5.29 H

QuickJet® Nozzle Bodies QuickJet® Dry Boom Nozzle Bodies QJL single body 125 PSI Part # QJL038 QJL QJL075

Desc. 3/8” Barb 1/2” Barb 3/4” Barb

QJC triple body 125 PSI

QJT double body 125 PSI Price $4.24 H $4.24 H $4.24 H

Part # QJT038 QJT QJT075

Desc. 3/8” Barbs 1/2” Barbs 3/4” Barbs

Price $4.24 H $4.24 H $4.24 H

Part # QJC038 QJC QJC075

Desc. 3/8” Barbs 1/2” Barbs 3/4” Barbs

Price $4.24 H $4.24 H $4.24 H

QuickJet® Dry Boom Nozzle Bodies w/ Diaphragm Check Valves QJLD single body w/check valve for up to 200 PSI Desc. 3/8” Barb 1/2” Barb 3/4” Barb

Spray Tips

Part # QJLD038 QJLD QJLD075

Price $10.53 H $10.53 H $10.53 H

QJCD triple body w/check valve up to 200 PSI

QJTD double body w/check valve for up to 200 PSI Part # QJTD038 QJTD QJTD075

Desc. 3/8” Barbs 1/2” Barbs “3/4”” Barbs”

QJLDHP single body w/check valve up to 300 PSI

Price $10.53 H $10.53 H $10.53 H

QJTDHP double body w/check valve up to 300 PSI

Part # QJCD038 QJCD QJCD075

Desc. 3/8” Barbs 1/2” Barbs 3/4” Barbs

Price $10.53 H $10.53 H $10.53 H

Diaphragm with nib 21953-EPR............... $0.47 H 21953-VI...................$1.55 H

Diaphragm w/o nib 4620-FA................... $0.47 H

Part # Desc. QJLDHP038 3/8” Barb QJLDHP 1/2” Barb QJLDHP075 3/4” Barb

Price $8.70 H $8.70 H $8.70 H

Material

NTT38 Nylon NTT12 Nylon NTT34 Nylon

Price $1.21 H $1.21 H $1.91 H

Nozzle Thread Barb Part # Material NTB38 Nylon NTB12 Nylon

Desc. 3/8” Barbs 1/2” Barbs 3/4” Barbs

Price $8.70 H $8.70 H $8.70 H

Nozzle Thread Cross

Nozzle Thread Tee Part #

Part # QJTDHP038 QJTDHP QJTDHP075

Part # Material NTC38 Nylon NTC12 Nylon NTC34 Nylon

End Cap 21950-10..................$3.81 H 21950-2....................$3.81 H

Nozzle Thread Elbow Price $1.95 H $2.42 H $2.29 H

Part # Material NTL38 Nylon NTL12 Nylon NTL34 Nylon

Price $1.13 H $1.11 H $1.60 H

Nozzle Thread Nut Nozzle Cap Female nozzle thread

NOTE: Bodies come with nozzle thread nut. Price $0.82 H $0.76 H

118

Part # Material NTN Nylon NTN-BR Brass

Price $0.25 H $2.72 H

Part # Material 1325-BR Brass 8027 Nylon 1325-SS Stainless 18032A-NY Wing nut

Price $1.43 H $0.93 H $8.59 H $1.32 H

www.horvick.com

Nozzle Body Assemblies Quick TeeJet Triple Nozzle Bodies nnUse vari-spacing boom clamps on Page 121

3/4” single hose connection Part # QJLD075-3............... $22.64

1/2” double hose connection Part # QJTD-3..................... $22.64

3/4” double hose connection Part # QJTD075-3............... $22.64

Installs on 1/2” pipe Installs on 3/4” pipe Installs on 1” pipe

Price $22.05 H $22.05 H $22.05 H

nnAdaptable to booms with larger supply hole nn3/4” & 1” wet boom sizes (wet only)

Quick TeeJet Swivel Body Assemblies

Part #

Description

QJ383-3/4-NYB QJ383-1-NYB QJ383F-3/4-NYB QJ383F-1-NYB

Installs on 3/4” pipe Installs on 1” pipe Fertilizer Style – fits 3/4” pipe Fertilizer Style – fits 1” pipe

Price $ $ $ $

Rapid Stop

For use at pressures up to 125 PSI.

QJ-8600-14-NY

Description

24216A-12 24216A-34 24216A-1

QJ-8600-214-NY

nnInstall 1 or 2 Rapid Stops per boom section to dramatically improve shut off time nnInstall in all bodies for the fastest evacuation of air in boom nnImproves start up times nnDoes NOT require boom redesign Part # 98583-1-1-SS nnAvailable for QJ360 and QJ17560 nn1” wet boom only $9.16 H nnSemi-permanent installation Part # 98583-2-1-SS

$9.16 H 8600-14T-NY Part # QJ8600-14-NY QJ8600-214-NY 8600-14T-NY 8600-214T-NY

8600-214T-NY Description Nylon w/QuickJet Nylon w/QuickJet Nylon single swivel Nylon double swivel

Price $7.75 H $9.34 H $8.98 H $10.86 H

Retrofit Part # 98488-VI

nnRetrofit gasket for large hole booms nnReplace JD factory supplied bodies nnFits existing booms with 11/16” holes

Quick TeeJet “Push To Connect” Fittings Designed to improve the speed and ease of assembling small diameter, semi-rigid tubing systems. By eliminating threaded fittings and other components, plumbing system complexity is reduced and reliability is improved. Part #

Description

QJ98586-3/8 QJ98588-1/4 QJ98590-3/8-2 QJ98590-3/8-10 QJ98592-1/4-2 QJ98598-90-1/4 QJ98599-90-3/8

3/8” 1/4” 3/8” 3/8” 1/4” 1/4” 3/8”

1-800-373-4084

QJ QJ QJ QJ QJ QJ QJ

Push-Connect Cap Push-Connect Cap Push-Connect Nozzle Body Push-Connect Nozzle Body 90° Push Connect Cap 90° Push Connect Cap

Price $5.96 $5.96 $12.40 $12.40 $12.40 $7.45 $7.45

H H H H H H H

nnAvailable for both 1/4” & 3/8”tubing sizes nnFor use with linear, low-density, polyethylene tubing nnRugged nylon construction for reliability and excellent chemical resistance nnIntegrated mounting lugs for using #10 screws or cable ties nnFlow rate of 2.25 GPM at 5 PSI pressure drop nn3.18 GPM at 10 PSI pressure drop nnMax. pressure rating of 100 PSI

119

Spray Tips

1/2” single hose connection Part # QJLD-3..................... $22.64

Part #

Nozzle Body Assemblies Quick TeeJet 360 Nozzle Body Series for Dry or Wet Booms Nozzle body rotates to select any of 3,4,or 5 different spray tips. Made of corrosion resistant materials, the 360 has positive shut-off between each nozzle position and at the spray tip. Maximum operating pressure is 300 PSI and flow rate is 1.5 GPM with a 5 PSI pressure drop. For use with all quick change colored caps. Caps and spray tips not included and should be ordered separately.

Wet Booms Part # QJ363-12-NYB QJ363-34-NYB QJ363-1-NYB QJ364-12-NYB QJ364-34-NYB QJ364-1-NYB QJ365-12-NYB QJ365-34-NYB QJ365-1-NYB

Spray Outlets

Pipe Size

3 3 3 4 4 4 5 5 5

1/2” 3/4” 1” 1/2” 3/4” 1” 1/2” 3/4” 1”

Price $16.46 $16.46 $16.46 $16.46 $16.46 $16.46 $16.46 $16.46 $16.46

H H H H H H H H H

Dry Booms QJ364

Part # Single

Part # Double

QJ363-500-1-NYB QJ363-750-1-NYB QJ363-1000-1-NYB QJ364-500-1-NYB QJ364-750-1-NYB QJ364-1000-1-NYB QJ365-500-1-NYB QJ365-750-1-NYB QJ365-1000-1-NYB

QJ363-500-2-NYB QJ363-750-2-NYB QJ363-1000-2-NYB QJ364-500-2-NYB QJ364-750-2-NYB QJ364-1000-2-NYB QJ365-500-2-NYB QJ365-750-2-NYB QJ365-1000-2-NYB

Spray Tips

Parts List 1 2

CP38930-8-NYB CP7717-2-13-EPR CP7717-2-13-VI CP38931-NYB

Plug, Blk. Nylon O-Ring, EPDM O-Ring, Viton (opt.) E-Clip, Blk. Nylon

5 6

CP7717-M28x3-EPRTFE CP7717-M28x3-VITFE CP56726-VITFE CP7717-2-111-VI

O-Ring, EPR-Teflon Filled (2 req) O-Ring, Viton-Tefl. Filled-opt. (2 req) Seal, Viton-Teflon Filled O-Ring, Viton

7A 7B 7C

CP38921-2-NYB CP38922-2-NYB CP38923-2-NYB

Turret, Nylon, Blk. (3 outlet) Turret, Nylon, Blk. (4 outlet) Turret, Nylon, Blk. (5 outlet)

CP21953-EPR CP21953-VI

Diaphragm, EPDM Diaphragm, Viton (opt.)

3 4

9 21950-10-NYB 10* CP38925-2-NYB

End Cap Sub-Assbly., Blk. Nylon 3/4” Body, Blk. Nylon*

CP7717-2-110-BU CP7717-2-110-VI

O-Ring, Buna-N O-Ring, Viton (opt.)

12 13 14

CP48255-1-1/4-302SS Screw, Stainless Steel CP48221-NYB 3/4” Upper Clamp, Blk. Nylon CP48256-SS Pivot Pin, Stainless Steel

15A CP38936-NYB 15B CP38938-NYB 15C CP38940-NYB

1/2” Single Hose Barb, Blk. Nylon 3/4” Single Hose Barb, Blk. Nylon 1” Single Hose Barb, Blk. Nylon

16A CP38937-NYB 16B CP38939-NYB 16C CP38941-NYB

1/2” Double Hose Barb, Blk. Nylon 3/4” Double Hose Barb, Blk. Nylon 1” Double Hose Barb, Blk. Nylon

3/4” Hose Barb x 1/2” NPT, Blk. Nylon

CP38948-NYB

Spray Outlets 3 3 3 4 4 4 5 5 5

To Fit Hose I.D. 1/2” 3/4” 1” 1/2” 3/4” 1” 1/2” 3/4” 1”

Price Single $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H

QJ365 Price Double $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H $20.58 H

PLQJ360C-DB “C” Series pictured

* Old style doesn’t have boom attach square.

120

www.horvick.com

Nozzle Accessories Hose Drops

Check Valves

Add To An Existing Boom To Convert To A Band Sprayer

This check valve is made of nylon with a nylon/ polypropylene end cap assembly. Check valve opens at 10 PSI. Inlet is 1/4” NPT (M). Flow rates up to 2 GPM.

Hose drops connect to standard and Quick TeeJet nozzle bodies and can also be used with swivels. Available in 15” and 24” lengths. Maximum operating pressure 125 PSI.

Part # 8360-NY

$17.45 H

This check valve is for larger capacity TeeJet nozzles where strainers are not required. Ball check opens at 10 PSI (5 PSI spring is available). Flow rates of .4 to 1.5 GPM.

Part # Length Inlet (in.) QJ21353-6-15 QJ21353-6-24 21354-15 21354-24

15 24 15 24

Price

(A) Quick TeeJet type (A) Quick TeeJet type (B) 11/16” -16 TeeJet thread (B) 11/16” -16 TeeJet thread

$12.60 $12.60 $8.31 $9.27

H H H H

NOTE: The QJ1/4T-NYB adapter (page 116) can be attached to hose drops for use with Quick TeeJet caps.

3/4” Diaphragm Check Valve nn3/4” inlet/outlet nn7 PSI shut off nnUsed on TerraGators Part # Description Price 12328-34-NY Complete check valve $92.37 H 12335-FA Diaphragm (Fairprene) $4.28 H 12335-VI Diaphragm (Viton) $10.19 H

Standard Boom Clamps Round Pipe

Plug Tip

Part # To Clamp On 111-12 1/2” 111-34 3/4” 111-1 1” 111-114 1-1/4”

Use to temporarily shut off selected nozzles by replacing spray tips with these plugs. Quick, easy way to change spacing of nozzles along boom. Brass plug tip Part # 3942-BR...................... $0.45 Stainless steel plug tip Part # 3942-SS...................... $0.70

Square Tubing

Part # To Clamp On 111SQ-1 1” 111SQ-114 1-1/4” 111SQ-112 1-1/2”

Eyelet Bodies

Stainless steel –1” Part # 7421-1T-SS............... $13.35

1-800-373-4084

Price $5.52 H $8.31 H $9.88 H

QuickJet® Boom Clamps

Use with all interchangeable spray tips at operating pressures up to 250 PSI. Available in sizes of 1/2”, 3/4”, and 1”

Stainless steel –3/4” Part # 7421-3/4T-SS............ $13.35

Price $4.80 H $4.80 H $4.80 H $8.04 H

Round Pipe Part # To Clamp On QJ111-12 1/2” QJ111-34 3/4” QJ111-1 1” QJ111-114 1-1/4”

Price $2.79 H $2.79 H $2.79 H $2.79 H

H Square Tubing H

Part # To Clamp On QJ111SQ-34 3/4” QJ111SQ-1 1” QJ111SQ-114 1-1/4” QJ111SQ-112 1-1/2”

Price $2.79 H $2.79 H $2.79 H $2.79 H

121

Spray Tips

Part # Desc. Price 11750-BR Brass $6.97 H 11750-SS Stainless Steel $22.31 H 11750-PP Polypropylene $5.92 H

Nozzle Accessories Standard Strainers Strainers protect spray tip orifices from clogging and damage. Nylon housing with a stainless steel screen. Stainless steel screens are availabe in 50, 100, and 200 mesh. Polypropylene screens are available in 25 and 50 mesh. Part # Material Mesh Price 8079-PP-50 Polypropylene 50 $1.25 H 8079-PP-100 Polypropylene 100 $1.25 H 5053-BR-50 Brass 50 $3.00 H 5053-BR-100 Brass 100 $3.00 H 6051-SS-50 Stainless 50 $11.88 H 6051-SS-100 Stainless 100 $11.88 H

TeeJet速 Strainer & Check Valve

Spray Tips

This strainer and check valve fits all TeeJet nozzles. The ball check opens at 5 PSI and is recommended for flow rates up to 0.8 GPM. Part # Material Mesh Price 4193A-PP-50 Polypropylene 50 $4.18 H 4193A-PP-100 Polypropylene 100 $4.18 H 4193A-BR-50 Brass 50 $5.27 H 4193A-BR-100 Brass 100 $5.27 H 4193A-SS-50 Stainless 50 $18.89 H 4193A-SS-100 Stainless 100 $18.89 H

Inlet Connectors Male Inlet Connectors Part # Material Size Price (in.) 1336-BR Brass 1/8 $2.37 H 1322-BR Brass 1/4 $2.37 H 8028-NY Nylon 1/4 $1.69 H 1322-SS Stainless 1/4 $15.79 H 1324-BR Brass 3/8 $2.37 H 1340-BR Brass 1/2 $8.69 H

Female Inlet Connectors Part # Material Size Price (in.) 1335-BR Brass 1/8 $2.37 H 1321-BR Brass 1/4 $2.37 H 12094-NY Nylon 1/4 $1.63 H 1321-SS Stainless 1/4 $15.79 H 1323-BR Brass 3/8 $4.09 H 1339-BR Brass 1/2 $8.69 H

Hose Shanks Fits all TeeJet nozzle caps, replacing spray tips. For attaching hose to nozzle body. Type 4251 is available in choice of brass or stainless steel. Type 8400 is made of Nylon.

TeeJet Slotted Strainer 速

Use this strainer with liquids containing suspended solids. Available in brass or nylon. Part # 4514-10 4514-20 4514-32 4514-NY-10 4514-NY-20 4514-NY-32

Material Mesh Price Brass 50 $1.40 H Brass 25 $1.40 H Brass 16 $1.40 H Nylon 50 $1.32 H Nylon 25 $1.32 H Nylon 16 $1.32 H

TeeJet速 Cup Strainer Stainless steel construction. Choice of 50, 100 and 200 mesh screeens. Part # 4067-SS-50

$1.63 H

Tip Cleaning Brush Part # BRUSH

$3.95 H

122

Part # 8400-14 8400-38 8400-12 4251-14-BR 4251-38-BR 4251-12-BR 4251-14-SS 4251-38-SS 4251-12-SS

Model 8400

Model 4251

Material Size (in.) Price Nylon 1/4 $0.98 H Nylon 3/8 $0.98 H Nylon 1/2 $0.98 H Brass 1/4 $3.39 H Brass 3/8 $3.39 H Brass 1/2 $3.39 H Stainless 1/4 $7.00 H Stainless 3/8 $7.00 H Stainless 1/2 $7.00 H

Outlet Adapters These adaptors fit the outlets of TeeJet nozzle bodies as well as the outlets of various TeeJet spray guns and shutoff valves. Also used for attaching hose drops to nozzles or extensions to spray guns. Part # Outlet Size (in.) 4676-BR-14 1/4 4676-NY-14 1/4 4676-SS-14 1/4

Material Brass Nylon Stainless Steel

Price $2.96 H $2.42 H $10.07 H

www.horvick.com

Spray Tip Selection Guide

TeeJet® AI3070

Turbo TeeJet®

Turbo TeeJet® Induction

Dual Flat Wide Spray Tip Angle Flat Spray Tip

AI TeeJet® AIXR®

TeeJet®

Air Induction Spray Tip

Stand Flat Extended Twin Flat Spray Tip Range Flat Spray Tip Spray Tip

Wide Angle Flat Spray Tip

Air Induction XR Flat Spray Tip

XR TeeJet® TwinJet®

Turbo FloodJet®

20-90 PSI 15-90 PSI

15-100 PSI 30-100 PSI 15-90 PSI

15-60 PSI

15-90 PSI

30-60 PSI

10-40 PSI

Page 128 Page 127

Page 127

Page 126

Page 130

Page 129

Page 126

Herbicides Excellent

—

Excellent

Very Good

Good

Excellent

—

Excellent

Pre-Emerge

Excellent

Good

Excellent

—

Excellent

Post-Emerge Contact

Good

Very Good

Good

Excellent

—

Excellent Very Good Excellent

Excellent

Good

Excellent

—

Excellent

Very Good

Good

Excellent

—

Excellent

Good

Excellent

Good

Excellent

Good

Excellent

—

Excellent Very Good Excellent

Excellent

Good

Excellent

—

Excellent

Excellent Very Good Excellent

Good

—

Good

—

Excellent

Post-Emerge Systemic

(at lower pressure)

Fungicides Contact

Excellent

Systemic

Excellent

Good

(at medium pressure)

—

Excellent Very Good Excellent

(at lower pressure)

Insecticides Contact

Systemic

Good

(at medium pressure)

Very Good

—

Liquid Fertilizer (at lower pressure)

(at lower pressure)

Available Materials Brass

—

Polymer

—

110° only

—

110° only

Stainless Steel

—

Hardened

—

Ceramic

—

1-800-373-4084

— —

110° only

—

123

Spray Tips

Soil Incorporated

Tip Chart Tip # (Strainer Screen Size)

Spray Tips

6501 8001 9501 11001 AI11001 XR11001 XR8001 100 Mesh Orange

Liquid Capacity Capacity Gallons Per Acre - 20â&#x20AC;? Nozzle Spacing Pressure 1 Nozzle 1 Nozzle 4 5 6 7 8 9 10 12 14 16 18 in PSI in GPM in oz./min. mph mph mph mph mph mph mph mph mph mph mph 15 20 25 30 40 50 60 70 80 90 100

0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16

8 4.5 3.6 3.0 2.5 2.2 2.0 1.8 1.5 1.3 1.1 1.0 9 5.2 4.2 3.5 3.0 2.6 2.3 2.1 1.7 1.5 1.3 1.2 10 5.9 4.8 4.0 3.4 3.0 2.6 2.4 2.0 1.7 1.5 1.3 12 6.7 5.3 4.5 3.8 3.3 3.0 2.7 2.2 1.9 1.7 1.5 13 7.4 5.9 5.0 4.2 3.7 3.3 3.0 2.5 2.1 1.9 1.6 14 8.2 6.5 5.4 4.7 4.1 3.6 3.3 2.7 2.3 2.0 1.8 15 8.9 7.1 5.9 5.1 4.5 4.0 3.6 3.0 2.5 2.2 2.0 17 9.7 7.7 6.4 5.5 4.8 4.3 3.9 3.2 2.8 2.4 2.1 18 10.4 8.3 6.9 5.9 5.2 4.6 4.2 3.5 3.0 2.6 2.3 19 11.1 8.9 7.4 6.4 5.6 5.0 4.5 3.7 3.2 2.8 2.5 20 11.9 9.5 7.9 6.8 5.9 5.3 4.8 4.0 3.4 3.0 2.6

65015 15 80015 20 95015 25 110015 30 AI110015 40 AIXR110015 50 XR110015 60 XR80015 70 100 mesh 80 Green 90 100

0.09 0.11 0.12 0.13 0.15 0.17 0.18 0.20 0.21 0.23 0.24

12 14 15 17 19 22 23 26 27 29 31

6.7 5.3 4.5 3.8 3.3 3.0 2.7 2.2 1.9 1.7 1.5 8.2 6.5 5.4 4.7 4.1 3.6 3.3 2.7 2.3 2.0 1.8 8.9 7.1 5.9 5.1 4.5 4.0 3.6 3.0 2.5 2.2 2.0 9.7 7.7 6.4 5.5 4.8 4.3 3.9 3.2 2.8 2.4 2.1 11.1 8.9 7.4 6.4 5.6 5.0 4.5 3.7 3.2 2.8 2.5 12.6 10.1 8.4 7.2 6.3 5.6 5.0 4.2 3.6 3.2 2.8 13.4 10.7 8.9 7.6 6.7 5.9 5.3 4.5 3.8 3.3 3.0 14.8 11.9 9.9 8.5 7.4 6.6 5.9 5.0 4.2 3.7 3.3 15.6 12.5 10.4 8.9 7.8 6.9 6.2 5.2 4.5 3.9 3.5 17.1 13.7 11.4 9.8 8.5 7.6 6.8 5.7 4.9 4.3 3.8 17.8 14.3 11.9 10.2 8.9 7.9 7.1 5.9 5.1 4.5 4.0

6502 8002 9502 11002 AI11002 AIXR11002 XR11002 XR8002 50 mesh Yellow

15 20 25 30 40 50 60 70 80 90 100

0.12 0.14 0.16 0.17 0.20 0.22 0.24 0.26 0.28 0.30 0.32

15 18 20 22 26 28 31 33 36 38 41

8.9 7.1 5.9 5.1 4.5 4.0 3.6 3.0 2.5 2.2 2.0 10.4 8.3 6.9 5.9 5.2 4.6 4.2 3.5 3.0 2.6 2.3 11.9 9.5 7.9 6.8 5.9 5.3 4.8 4.0 3.4 3.0 2.6 12.6 10.1 8.4 7.2 6.3 5.6 5.0 4.2 3.6 3.2 2.8 14.8 11.9 9.9 8.5 7.4 6.6 5.9 5.0 4.2 3.7 3.3 16.3 13.1 10.9 9.3 8.2 7.3 6.5 5.4 4.7 4.1 3.6 17.8 14.3 11.9 10.2 8.9 7.9 7.1 5.9 5.1 4.5 4.0 19.3 15.4 12.9 11.0 9.7 8.6 7.7 6.4 5.5 4.8 4.3 20.8 16.6 13.9 11.9 10.4 9.2 8.3 6.9 5.9 5.2 4.6 22.3 17.8 14.8 12.7 11.1 9.9 8.9 7.4 6.4 5.6 5.0 23.8 19.0 15.8 13.6 11.9 10.6 9.5 7.9 6.8 5.9 5.3

xx025 Available in TT, TTI, AI, AIC & XRC only 50 Mesh Purple

15 2 25 30 40 50 60 70 80 90 100

0.15 0.18 0.20 0.22 0.25 0.28 0.31 0.33 0.35 0.38 0.40

19 23 26 28 32 36 40 42 45 49 51

11.1 8.9 7.4 6.4 5.6 5.0 4.5 3.7 3.2 2.8 2.5 13.4 10.7 8.9 7.6 6.7 5.9 5.3 4.5 3.8 3.3 3.0 14.8 11.9 9.9 8.5 7.4 6.6 5.9 5.0 4.2 3.7 3.3 16.3 13.1 10.9 9.3 8.2 7.3 6.5 5.4 4.7 4.1 3.6 18.6 14.8 12.4 10.6 9.3 8.2 7.4 6.2 5.3 4.6 4.1 20.8 16.6 13.9 11.9 10.4 9.2 8.3 6.9 5.9 5.2 4.6 23.0 18.4 15.3 13.2 11.5 10.2 9.2 7.7 6.6 5.8 5.1 24.5 19.6 16.3 14.0 12.3 10.9 9.8 8.2 7.0 6.1 5.4 26.0 20.8 17.3 14.8 13.0 11.6 10.4 8.7 7.4 6.5 5.8 28.2 22.6 18.8 16.1 14.1 12.5 11.3 9.4 8.1 7.1 6.3 29.7 23.8 19.8 17.0 14.8 13.2 11.9 9.9 8.5 7.4 6.6

xx03 50 Mesh Blue

15 20 25 30 40 50 60 70 80 90 100

0.18 0.21 0.24 0.26 0.30 0.34 0.37 0.40 0.42 0.45 0.47

23 27 31 33 38 44 47 51 54 58 60

13.4 10.7 8.9 7.6 6.7 5.9 5.3 4.5 3.8 3.3 3.0 15.6 12.5 10.4 8.9 7.8 6.9 6.2 5.2 4.5 3.9 3.5 17.8 14.3 11.9 10.2 8.9 7.9 7.1 5.9 5.1 4.5 4.0 19.3 15.4 12.9 11.0 9.7 8.6 7.7 6.4 5.5 4.8 4.3 22.3 17.8 14.8 12.7 11.1 9.9 8.9 7.4 6.4 5.6 5.0 25.2 20.2 16.8 14.4 12.6 11.2 10.1 8.4 7.2 6.3 5.6 27.5 22.0 18.3 15.7 13.7 12.2 11.0 9.2 7.8 6.9 6.1 29.7 23.8 19.8 17.0 14.8 13.2 11.9 9.9 8.5 7.4 6.6 31.2 24.9 20.8 17.8 15.6 13.9 12.5 10.4 8.9 7.8 6.9 33.4 26.7 22.3 19.1 16.7 14.8 13.4 11.1 9.5 8.4 7.4 34.9 27.9 23.3 19.9 17.4 15.5 14.0 11.6 10.0 8.7 7.8

NOTE: xx refers to tip type and size. Ex. XR8001 AI11005

124

www.horvick.com

Tip Chart Tip # (Strainer Screen Size)

0.24 0.28 0.32 0.35 0.40 0.45 0.49 0.53 0.57 0.60 0.63

31 36 41 45 51 58 63 68 73 77 81

17.8 14.3 11.9 10.2 8.9 7.9 7.1 5.9 5.1 4.5 4.0 20.8 16.6 13.9 11.9 10.4 9.2 8.3 6.9 5.9 5.2 4.6 23.8 19.0 15.8 13.6 11.9 10.6 9.5 7.9 6.8 5.9 5.3 26.0 20.8 17.3 14.8 13.0 11.6 10.4 8.7 7.4 6.5 5.8 29.7 23.8 19.8 17.0 14.8 13.2 11.9 9.9 8.5 7.4 6.6 33.4 26.7 22.3 19.1 16.7 14.8 13.4 11.1 9.5 8.4 7.4 36.4 29.1 24.3 20.8 18.2 16.2 14.6 12.1 10.4 9.1 8.1 39.4 31.5 26.2 22.5 19.7 17.5 15.7 13.1 11.2 9.8 8.7 42.3 33.9 28.2 24.2 21.2 18.8 16.9 14.1 12.1 10.6 9.4 44.5 35.6 29.7 25.5 22.3 19.8 17.8 14.8 12.7 11.1 9.9 46.8 37.4 31.2 26.7 23.4 20.8 18.7 15.6 13.4 11.7 10.4

xx05 (50 Mesh) Brown

15 20 25 30 40 50 60 70 80 90 100

0.31 0.35 0.40 0.43 0.50 0.56 0.61 0.66 0.71 0.75 0.79

40 45 51 55 64 72 78 84 91 96 101

23.0 18.4 15.3 13.2 11.5 10.2 9.2 7.7 6.6 5.8 5.1 26.0 20.8 17.3 14.8 13.0 11.6 10.4 8.7 7.4 6.5 5.8 29.7 23.8 19.8 17.0 14.8 13.2 11.9 9.9 8.5 7.4 6.6 31.9 25.5 21.3 18.2 16.0 14.2 12.8 10.6 9.1 8.0 7.1 37.1 29.7 24.8 21.2 18.6 16.5 14.8 12.4 10.6 9.3 8.2 41.6 33.3 27.7 23.8 20.8 18.5 16.6 13.9 11.9 10.4 9.2 45.3 36.2 30.2 25.9 22.6 20.1 18.1 15.1 12.9 11.3 10.1 49.0 39.2 32.7 28.0 24.5 21.8 19.6 16.3 14.0 12.3 10.9 52.7 42.2 35.1 30.1 26.4 23.4 21.1 17.6 15.1 13.2 11.7 55.7 44.5 37.1 31.8 27.8 24.8 22.3 18.6 15.9 13.9 12.4 58.7 46.9 39.1 33.5 29.3 26.1 23.5 19.6 16.8 14.7 13.0

xx06 (50 Mesh) Gray

15 20 25 30 40 50 60 70 80 90 100

0.37 0.42 0.47 0.52 0.60 0.67 0.73 0.79 0.85 0.90 0.95

47 54 60 67 77 86 93 101 109 115 122

27.5 22.0 18.3 15.7 13.7 12.2 11.0 9.2 7.8 6.9 6.1 31.2 24.9 20.8 17.8 15.6 13.9 12.5 10.4 8.9 7.8 6.9 34.9 27.9 23.3 19.9 17.4 15.5 14.0 11.6 10.0 8.7 7.8 38.6 30.9 25.7 22.1 19.3 17.2 15.4 12.9 11.0 9.7 8.6 44.5 35.6 29.7 25.5 22.3 19.8 17.8 14.8 12.7 11.1 9.9 49.7 39.8 33.2 28.4 24.9 22.1 19.9 16.6 14.2 12.4 11.1 54.2 43.4 36.1 31.0 27.1 24.1 21.7 18.1 15.5 13.6 12.0 58.7 46.9 39.1 33.5 29.3 26.1 23.5 19.6 16.8 14.7 13.0 63.1 50.5 42.1 36.1 31.6 28.1 25.2 21.0 18.0 15.8 14.0 66.8 53.5 44.5 38.2 33.4 29.7 26.7 22.3 19.1 16.7 14.8 70.5 56.4 47.0 40.3 35.3 31.4 28.2 23.5 20.2 17.6 15.7

xx08 (50 Mesh) White

15 20 25 30 40 50 60 70 80 90 100

0.49 0.57 0.63 0.69 0.80 0.89 0.98 1.06 1.13 1.20 1.26

63 73 81 88 102 114 125 136 145 154 161

36.4 29.1 24.3 20.8 18.2 16.2 14.6 12.1 10.4 9.1 8.1 42.3 33.9 28.2 24.2 21.2 18.8 16.9 14.1 12.1 10.6 9.4 46.8 37.4 31.2 26.7 23.4 20.8 18.7 15.6 13.4 11.7 10.4 51.2 41.0 34.2 29.3 25.6 22.8 20.5 17.1 14.6 12.8 11.4 59.4 47.5 39.6 33.9 29.7 26.4 23.8 19.8 17.0 14.8 13.2 66.1 52.9 44.1 37.8 33.0 29.4 26.4 22.0 18.9 16.5 14.7 72.8 58.2 48.5 41.6 36.4 32.3 29.1 24.3 20.8 18.2 16.2 78.7 63.0 52.5 45.0 39.4 35.0 31.5 26.2 22.5 19.7 17.5 83.9 67.1 55.9 47.9 42.0 37.3 33.6 28.0 24.0 21.0 18.6 89.1 71.3 59.4 50.9 44.5 39.6 35.6 29.7 25.5 22.3 19.8 93.6 74.8 62.4 53.5 46.8 41.6 37.4 31.2 26.7 23.4 20.8

xx10 15 0.61 78 45.3 36.2 30.2 25.9 22.6 20.1 18.1 15.1 12.9 11.3 10.1 LT. Blue 20 0.71 91 52.7 42.2 35.1 30.1 26.4 23.4 21.1 17.6 15.1 13.2 11.7 25 0.79 101 58.7 46.9 39.1 33.5 29.3 26.1 23.5 19.6 16.8 14.7 13.0 30 0.87 111 64.6 51.7 43.1 36.9 32.3 28.7 25.8 21.5 18.5 16.1 14.4 40 1.00 128 74.2 59.4 49.5 42.4 37.1 33.0 29.7 24.8 21.2 18.6 16.5 50 1.12 143 83.2 66.5 55.4 47.5 41.6 37.0 33.3 27.7 23.8 20.8 18.5 60 1.22 156 90.6 72.5 60.4 51.8 45.3 40.3 36.2 30.2 25.9 22.6 20.1 70 1.32 169 98.0 78.4 65.3 56.0 49.0 43.6 39.2 32.7 28.0 24.5 21.8 80 1.41 180 104.7 83.8 69.8 59.8 52.3 46.5 41.9 34.9 29.9 26.2 23.3 90 1.50 192 111.4 89.1 74.2 63.6 55.7 49.5 44.5 37.1 31.8 27.8 24.8 100 1.58 202 117.3 93.9 78.2 67.0 58.7 52.1 46.9 39.1 33.5 29.3 26.1 NOTE: xx refers to tip type and size. Ex. XR8001 AI11005

1-800-373-4084

125

Spray Tips

xx04 (50 Mesh) Red

Spraying System Tips AIXR TeeJet®

Air Induction XR Flat Spray Tips

Material Poly

AIXR-110º

Typical Applications:

See selection guide on Page 123 for recommended typical application.

Features: nn110° wide, tapered flat spray angle with air induction technology for better drift management.

XR TeeJet® Spray Tip

AIXR110015VP

$7.65 H

Tip sizes 01

015 •

02 •

25 •

03 •

04 •

05 •

06 •

through a Venturi air aspirator. nnRemovable pre-orifice. nnAvailable in seven tip capacities with a wide operating pressure range: 15–90 PSI (1–6 bar). nnAutomatic alignment when used with 25612-*-NYR Quick TeeJet® cap and gasket.

nnMade of a two-piece UHMWPE polymer construction with VisiFlo® color-coding—provides excellent chemical resistance, including acids, & exceptional wear life. nnCompact size prevents tip damage. nnDepending on the chemical, produces large air-filled drops

Tip sizes

Part # Example

Price

XR80015 XR8003-VK XR11002 XR11003-VK XR110015-VP

$7.36 $5.68 $7.36 $5.68 $3.29

Part # Example

Price

Stainless Ceramic Stainless Ceramic

XRC8002 XRC8003-VK XRC11003 XRC11003-VK

$8.44 $6.89 $8.44 $6.89

Poly

XRC110025-VP

$3.92 H

Stainless/celcon Ceramic Stainless/celcon Ceramic Poly

XR-110º

Price

Extended Range Flat Spray Tips Material

XR-80º

Part # Example

H H H H H

01 •

015 •

02 •

03 04 05 • • • • • • • • • • • • • • • • • • • • • • * =All stainless steel $7.92 H

06 • • • • •

08 • • • • •

10 *

15 *

Tip sizes

With Quick Cap

Spray Tips

XRC-80º XRC-110º

Material

H H H H

015 •

02 • • •

04 • • • •

05 • • • •

06 • •

• •

03 • • • •

•

Typical Applications:

nnAvailable in stainless steel, hardFeatures: ened stainless steel, ceramic and See selection guide on Page 123 for nnExcellent spray distribution over polymer in 80° and 110° spray recommended typical application for a wide range of pressures—15-60 angles…with VisiFlo color-coding PSI (1-4 bar) XR TeeJet. n n Automatic spray alignment with nnIdeal for rigs equipped with How to create the part number. 25612-*-NYR Quick TeeJet cap and sprayer controllers gasket. Part # Example Stainless VS Ceramic VK nnReduces drift at lower pressures, XR80015-VS n n Automatic spray alignment for better coverage at higher pressures Poly VP sizes 10 and 15 with 25610-*-NYR Model Tip Size Material Brass BR nn Quick TeeJet cap and gasket.

TeeJet®

Spray Tips

Tip sizes

Material

80º 110º

Part # Example

Brass (1) (2) Stainless/celcon Brass (1) (2) Stainless/celcon (1) Limited to stock on hand,

Typical Applications:

See selection guide on Page 123 for recommended typical application.

Features: nnTapered edge flat spray pattern for uniform coverage in broadcast spraying

126

80015-BR 80015-VS 110015-BR 110015-VS then special order

Price $4.41 H $6.57 H $4.41 H $6.57 H only. (2)

01 015 02 03 04 • • • • • • • • • • • • • • • • • • • • Brass has no color coding.

nnVisiFlo color-coded version available in stainless steel, hardened stainless steel, ceramic and polymer in 80° or 110° spray angles in selected sizes nnStandard version (not color-coded) available in 65°, 80°, and 110° spray angles

05 • • • •

06 • • • •

08 • • • •

10 •

15 •

•

nnAutomatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket. Reference page 104 for more information nnAutomatic spray alignment for sizes 10 thru 20 with 25610-*-NYR Quick TeeJet cap and gasket.

www.horvick.com

Spraying System Tips How to create the part number. Part # Example Stainless VS Ceramic VK XR80015-VS

TeeJet Air Induction ®

Model

Flat Spray Tip

Poly VP Brass BR

Tip Size Material Tip sizes

Material

Part # Example

Price

015

•

AI-110º

Stainless

AI11002VS

$14.07 H

With Quick Cap

Material

Part # Example

Price

Stainless

AIC110025VS

$15.26 H

•

Ceramic

AIC11003VK

$12.43 H

•

Poly

AIC110025VP

$7.04 H

•

AIC-110º

See selection guide on Page 123 for recommended typical application for AI TeeJet.

Turbo TeeJet®

Features: nnStainless steel insert produces tapered edge flat spray pattern for uniform coverage in broadcast spraying nnPolymer insert holder and preorifice with VisiFloT color-coding nnLarger droplets for less drift

nnDepending on the chemical, produces large air-filled drops through the use of a venturi air aspirator nnAutomatic spray alignment with 25598-*-NYR Quick TeeJetT cap and gasket. nnNow available in 06, 08, and 10 capacities

Wide Angle Flat Spray Tips

Material

TT-110º

•

Poly

Typical Applications:

See selection guide on Page 123 for recommended typical application for Turbo TeeJet.

Part # Example

Price

TT11002-VP

$6.94 H

Tip sizes 01

015

•

Features: nnTapered edge wide angle flat spray pattern for uniform coverage in broadcast spraying nnLarge, rounded internal passage to minimize clogging nnExcellent resistance to corrosive solutions

nnSuperior wear characteristics nnLarger droplets for less drift – 15-90 PSI (1-6 bar) nnAutomatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket.

Turbo TeeJet® Induction Material

TTI-110º

Poly

Air Induction Spray Tip from TeeJet Provides Excellent Drift Resistance

The Turbo TeeJet Induction (TTI) spray tip design is ideal for use when off-target drift is a concern and excellent overlap distribution is required. Using a unique pre-orifice design, the smaller droplets in the

1-800-373-4084

Part # Example

Price

TTI-110025-VP

$7.65 H

015

•

spectrum are eliminated and large, air-filled, drift-resistant droplets are produced. Based on the patented design of the original Turbo TeeJet spray nozzle, the TTI offers many of the same benefits: nnA wide angle flat spray pattern, nnExcellent spray pattern distribution nnAn economical polymer

Tip sizes 04 05 •

•

construction. nn Automatic spray alignment with 25597-XX nnOther TTI features include: nnEasy pre-orifice removal for cleaning and inspection nnA choice of six capacities ranging from 0.15 to 0.5 GPM at 40 PSI, color-coding nnEasy installation and alignment via Quick TeeJet® Caps.

127

Spray Tips

Typical Applications:

Spraying System Tips Turbo TwinJet®

How to create the part number. Part # Example Stainless VS Ceramic VK XR80015-VS

Twin Flat Spray Tips

Model

Tip Size Material

Poly VP Brass BR

Tip sizes Material

TTJ60-110º

Poly

Features: nnProduces a dual, tapered edge, wide angle, flat spray pattern for uniform coverage in broadcast spraying. nnDual angled spray patterns help to penetrate crop canopies and provide thorough leaf coverage.

TwinJet®

Part # Example

Price

TTJ60-11002-VP

$8.32 H

•

nnLarge, round free passages to minimize clogging. nnDroplet size range is slightly larger that the equivalent capacity Turbo TeeJet nozzle providing drift reducing properties with increased canopy coverage and penetration.

Twin Flat Spray Tips

Typical Application:

See selection guide on Page 123 for recommended typical application for TwinJet.

Features:

Spray Tips

nnAll Acetal construction for excellent chemical and wear resistance. nnAutomatic spray alignment with 25612-_-NYR Quick TeeJet cap and gasket. nnSuggested spray pressure range – 20 - 90 PSI.

TJ60-xxxxx-VS (Visi-Flo)....... $12.81H

TeeJet® AI3070

nnPenetrates crop residue or dense foliage nnSmaller droplets for thorough coverage nnNozzle spacing – 20 inches (50 cm) nnSpraying pressure – 15-40 PSI nnBetter spray distribution along

boom than with hollow cone nozzles nnAvailable in brass or stainless steel with VisiFloT color-coding in 65°, 80° and 110° spray angles nnAutomatic spray alignment with 25598-*-NYR Quick TeeJetT cap and gasket. Reference “Quick TeeJet® Spray Tips” on page 116 for more information

Air Induction Dual Pattern Flat Spray Tips

Typical Application: Excellent penetration and seed head coverage for fungicide spraying on cereal crops

Features: nnAI3070 produces two wide angle, flat spray patterns for uniform coverage in broadcast applications nn30° forward tilted spray penetrates dense crop canopies, while the backward tilted 70° spray maximizes coverage of the crop seed head

128

nnDrift resistant drops are produced through the use of a venturi air aspirator nnLarge, round, free passages minimize clogging nnAll acetal construction for excellent chemical and wear resistance nnRemovable pre-orifice for fast and easy cleaning nnAutomatic alignment with the use of CP98578-1-NY cap and 985791-NYR cap and gasket nnSuggested spray pressure range of 20 to 90 PSI

www.horvick.com

Spraying System Tips FloodJet® Series FloodJet® spray tips produce a very wide deflector type flat spay pattern. They are normally used for pre-emergent chemicals. Standard FloodJet tips should have a 50% minimum spray overlap. The Turbo FloodJet may also be used for post emergent system herbicides, as it has a superior spray pattern. It is a stainless steel tip with a colorcoded insert for easy identification. The Turbo FloodJet should have a 30% overlap. Available in sizes from 2-10.

Style TF-VS (Turbo FloodJet)

(All S. Steel)

Style TKVS (VisiFlo)

Style TF-VP (Polymer)

Style KSS

(1/8” through 1” MPT)

Old Tip #

Size Price - $13.94 H 1/4 $20.35 H 3/8 $27.29 H 1/2 $33.02 H - $1.25 H - $3.15 H

Suggested Minimum Spray Height Nozzle Spray Height Spacing 20” 14-16” 30” 15-17” 40” 18-20”

New Plastic Threaded GPM/ gallons per acre at 40” spacing at the following mph Tip # Flood Nozzle # PSI nozzle 4 5 6 8 10 12 14 16

TKSS-.5 — AN.5 KSS-.5 100 mesh Orange 100 mesh TKSS.75 — AN.75 KSS-.75 100 mesh Green 100 mesh TKSS1 — AN1 KSS-1 50 mesh Yellow 50 mesh TKSS1.5 — AN1.5 KSS-1.5 50 mesh Blue 50 mesh TKVS2 TF-VS2 AN2 KSS-2 50 mesh 50 mesh Red Red Red 50 mesh TKVS-2.5 TF-VS2.5 AN2.5 KSS-2.5 50 mesh 50 mesh Brown Brown Brown 50 mesh TKVS-3 TF-VS3 AN3 KSS-3 50 mesh 50 mesh Gray Gray Gray 50 mesh TKVS-4 TF-VS4 AN4 KSS-4 White White White TKVS-5 TF-VS5 AN5 KSS-5 L. Blue L. Blue L.Blue TKVS-7.5 TF-VS7.5 AN7.5 KSS-7.5 L. Green L. Green L.Green TKVS-10 TF-VS10 AN10 KSS-10 Black Black Black TKSS-15 — AN15 KSS-15 Pink TKSS-20 — AN20 KSS-20 — — TKSS-30 KSS-30

1-800-373-4084

10 — — — — — — — — — — 20 0.07 2.6 2.1 1.8 1.3 1.1 0.88 0.75 0.66 0.53 30 0.08 3.2 2.6 2.1 1.6 1.3 1.1 0.92 0.8 0.64 10 0.07 2.8 2.2 1.9 1.4 1.1 0.93 0.8 0.7 0.56 20 0.11 3.9 3.2 2.6 2 1.6 1.3 1.1 0.98 0.79 30 0.13 4.8 3.9 3.2 2.4 1.9 1.6 1.4 1.2 0.96 10 0.1 3.7 3 2.5 1.9 1.5 1.2 1.1 0.93 0.74 20 0.14 5.3 4.2 3.5 2.6 2.1 1.8 1.5 1.3 1.1 30 0.17 6.4 5.1 4.3 3.2 2.6 2.1 1.8 1.6 1.3 10 0.15 5.6 4.5 3.7 2.8 2.2 1.9 1.6 1.4 1.1 20 0.21 7.9 6.3 5.3 3.9 3.2 2.6 2.3 2 1.6 30 0.26 9.7 7.7 6.4 4.8 3.9 3.2 2.8 2.4 1.9 10 0.2 7.4 5.9 5 3.7 3 2.5 2.1 1.9 1.5 20 0.28 10.5 8.4 7 5.3 4.2 3.5 3 2.6 2.1 30 0.35 12.9 10.3 8.6 6.4 5.1 4.3 3.7 3.2 2.6 10 0.25 9.3 7.4 6.2 4.6 3.7 3.1 2.7 2.3 1.9 20 0.35 13.1 10.5 8.8 6.6 5.3 4.4 3.8 3.3 2.6 30 0.43 16.1 12.9 10.7 8 6.4 5.4 4.6 4 3.2 10 0.3 11.1 8.9 7.4 5.6 4.5 3.7 3.2 2.8 2.2 20 0.42 15.8 12.6 10.5 7.9 6.3 5.3 4.5 3.9 3.2 30 0.52 19.3 15.4 12.9 9.7 7.7 6.4 5.5 4.8 3.9 10 0.4 14.9 11.9 9.9 7.4 5.9 5 4.2 3.7 3 20 0.57 21 16.8 14 10.5 8.4 7 6 5.3 4.2 30 0.69 26 21 17.2 12.9 10.3 8.6 7.4 6.4 5.1 10 0.5 18.6 14.9 12.4 9.3 7.4 6.2 5.3 4.6 3.7 20 0.71 26 21 17.5 13.1 10.5 8.8 7.5 6.6 5.3 30 0.87 32 26 21 16.1 12.9 10.7 9.2 8 6.4 10 0.75 28 22 18.6 13.9 11.1 9.3 8 7 5.6 20 1.1 39 32 26 19.7 15.8 13.1 11.3 9.8 7.9 30 1.3 48 39 32 24 19.3 16.1 13.8 12.1 9.7 10 1 37 30 25 18.6 14.9 12.4 10.6 9.3 7.4 20 1.4 53 42 35 26 21 17.5 15 13.1 10.5 30 1.7 64 51 43 32 26 21 18.4 16.1 12.9 10 1.5 56 45 37 28 22 18.6 15.9 13.9 11.1 20 2.1 79 63 53 39 32 26 23 19.7 15.8 30 2.6 96 77 64 48 39 32 28 24 19.3 10 2 74 59 50 37 30 25 21 18.6 14.9 20 2.8 105 84 70 53 42 35 30 26 21 30 3.5 129 103 86 64 51 43 37 32 26 10 3 111 89 74 56 45 37 32 28 20 4.2 158 126 105 79 63 53 45 39 30 5.2 193 154 129 96 77 64 55 48

22 32 39

129

Spray Tips

Style TKSS

Style Description TF-VS Turbo FloodJet-VS 1/4KSS Threaded stainless 3/8KSS Threaded stainless 1/2KSS Threaded stainless AN Kematal plastic TF-VP Polymer

Spraying System Tips TeeJet® VisiFlo Even Flat Spray Tips 40°, 80°, & 95° E Series VisiFlo & Brass

Features:

Row Spacing

n Ideal for banding over the row or in row middles. n Provides uniform distribution throughout the flat spray pattern. n Easily mounted on spray boom or planter. n Tips materials include brass, stainless steel, and hardened stainless steel.

xxxxEVS Even VisiFlo

$6.57 H

Spray Band Band Width

8” 10” 12” 15”

xxxx-EBR Even Brass

$4.48 H

TwinJet® Twin Even Flat Spray Tips

Approx. GPA* Conversion Spray Height Factor 40° 80° 95° 30” Row 40” Row series series series spacing spacing

10” 12” 14” 19”

5” 6” 7” 9”

4” 5” 6” 8”

3.8 3.0 2.5 2.0

5.0 4.0 3.3 2.6

*To find GPA rate on band widths, multiply the tabulated GPA for ROW SPACING by the appropriate conversion factor

40° & 80° E Series

Spray Tips

Features: n VisiFlo version offers convenience of color-coding. How to create the part number. n Ideal for banding over or between Part # Example Stainless crop rows. Ceramic XR80015-VS Poly n Provides uniform distribution throughout the flat spray pattern. Model Tip Size Material Brass n Available in 800 and 400 twin flat spray patterns. n Stainless steel tip material.

TJ60-xxxxEVS Twin Even VisiFlo

VS VK VP BR

$17.87 H Tip Color

Tip # VisiFlo

Tip # TwinJet

YELLOW

8002EVS 9502EVS (100 Mesh) 8003EVS 9503EVS (100 Mesh) 8004EVS 9504EVS (50 Mesh) 8005EVS 9505EVS (50 Mesh) 8006EVS 9506EVS (50 Mesh) 8008EVS (50 Mesh)

TJ60 4002-EVS 8002-EVS TJ60 4003-EVS 8003-EVS TJ60 4004-EVS 8004-EVS

BLUE RED BROWN GRAY WHITE

TJ60 4006-EVS 8006-EVS

130

Liquid Pressure (PSI) 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40

Capacity 1 Nozzle (GPM) 0.14 0.17 0.20 0.21 0.26 0.30 0.28 0.35 0.40 0.35 0.43 0.50 0.42 0.52 0.60 0.57 0.69 0.80

Capacity 1 Nozzle (oz./min.) 18 22 26 27 33 38 36 45 51 45 55 64 54 67 77 73 88 102

Gallons Per Acre – 30” Spacing 3 4 5 7 mph mph mph mph 9.2 6.9 5.5 4.0 11.2 8.4 6.7 4.8 13.2 9.9 7.9 5.7 13.9 10.4 8.3 5.9 17.2 12.9 10.3 7.4 19.8 14.9 11.9 8.5 18.5 13.9 11.1 7.9 23.0 17.3 13.9 9.9 26.0 19.8 15.8 11.3 23.0 17.3 13.9 9.9 28.0 21.0 17.0 12.2 33.0 25.0 19.8 14.1 28.0 21.0 16.6 11.9 34.0 26.0 21.0 14.7 40.0 30.0 24.0 17.0 38.0 28.0 23.0 16.1 46.0 34.0 27.0 19.5 53.0 40.0 32.0 23.0

Gallons Per Acre – 40” Spacing 3 4 5 7 mph mph mph mph 6.9 5.2 4.2 3.0 8.4 6.3 5.0 3.6 9.9 7.4 5.9 4.2 10.4 7.8 6.2 4.5 12.9 9.7 7.7 5.5 14.9 11.1 8.9 6.4 13.9 10.4 8.3 5.9 17.3 13.0 10.4 7.4 19.8 14.9 11.9 8.5 17.3 13.0 10.4 7.4 21.0 16.0 12.8 9.1 25.0 18.6 14.9 10.6 21.0 15.6 12.5 8.9 26.0 19.3 15.4 11.0 30.0 22.0 17.8 12.7 28.0 21.0 16.9 12.1 34.0 26.0 20.0 14.6 40.0 30.0 24.0 17.0

www.horvick.com

Spraying System Tips TeeJet® 150° Double Outlet Flat Spray Tips 150° Series Stainless Steel and Brass Tips

Brass

$9.61 H

Suggested for post-directed application with hose drops

Stainless Steel

$17.40 H

Example: 15003-SS Tip # (Strainer Screen Size)

150015 (100 Mesh)

15003 (100 Mesh) 15004 (50 Mesh) 15005 (50 Mesh) 15006 (50 Mesh)

20 0.11 25 0.12 30 0.13 40 0.15 50 0.17 20 0.14 25 0.16 30 0.17 40 0.2 50 0.22 20 0.21 25 0.24 30 0.26 40 0.3 50 0.34 20 0.28 25 0.32 30 0.35 40 0.4 50 0.45 20 0.35 25 0.4 30 0.43 40 0.5 50 0.56 20 0.42 25 0.47 30 0.52 40 0.6 50 0.67

Gallons Per Acre- 30” Spacing 6 mph

7 mph

8 mph

10 mph

12 mph

height

Nozzle No.

Liquid Pressure psi

Nozzle Capacity GPM

6 mph

7 mph

8 mph

10 mph

OC-02

30 40 60

.17 .20 .24

OC-03

30 40 60

TeeJet Off-Center spray tips are commonly installed in double and single swivel nozzle bodies. Because these bodies are adjustable for angular position, a wide spray swath is easily obtained.

OC-04

Stainless Steel Part # OC01-SS

$17.40 H

Spraying Height “H”= 18" “W” in inches

Gallons Per Acre* 3 mph

4 mph

5 mph

68 70 72

5.0 5.7 6.6

3.7 4.2 5.0

3.0 3.4 4.0

.26 .30 .37

77 80 82

6.7 7.4 8.9

5.0 5.6 6.7

30 40 60

.35 .40 .49

91 93 94

7.6 8.5 10.3

OC-06

30 40 60

.52 .60 .73

99 101 102

OC-08

30 40 60

.69 .80 .98

OC-12

30 40 60

OC-16

30 40 60

width

$11.76 H

Gallons Per Acre- 40” Spacing

16 mph

12 mph

14 mph

16 mph

3.5 3 2.6 2.1 1.8 1.5 1.3 2.6 2.3 2 1.6 1.3 1.1 3.9 3.4 2.9 2.4 2 1.7 1.5 2.9 2.5 2.2 1.8 1.5 1.3 1.1 4.3 3.7 3.2 2.6 2.1 1.8 1.6 3.2 2.8 2.4 1.9 1.6 1.4 1.2 5 4.2 3.7 3 2.52 2.1 1.9 3.7 3.2 2.8 2.2 1.9 1.6 1.4 5.5 4.7 4.2 3.3 2.8 2.4 2.1 4.2 3.6 3.1 2.5 2.1 1.8 1.6 4.7 4 3.5 2.8 2.3 2 1.8 3.5 3 2.6 2.1 1.8 1.5 1.3 5.2 4.5 3.9 3.1 2.6 2.2 2 3.9 3.4 2.9 2.4 2 1.7 1.5 5.7 4.9 4.3 3.4 2.9 2.5 2.1 4.3 3.7 3.2 2.6 2.1 1.8 1.6 6.6 5.7 5 4 3.3 2.8 2.5 5 4.2 3.7 3 2.5 2.1 1.9 7.4 6.3 5.5 4.4 3.7 3.2 2.8 5.5 4.7 4.2 3.3 2.8 2.4 2.1 7 6 5.3 4.2 3.5 3 2.6 5.3 4.5 3.9 3.2 2.6 2.3 2 7.8 6.7 5.9 4.7 3.9 3.4 2.9 5.9 5 4.4 3.5 2.9 2.5 2.2 8.6 7.4 6.4 5.1 4.3 3.7 3.2 6.4 5.5 4.8 3.9 3.2 2.8 2.4 9.9 8.5 7.4 5.9 5 4.2 3.9 7.4 6.4 5.6 4.5 3.7 3.2 2.8 11.1 9.5 8.3 6.6 5.5 4.7 4.2 8.3 7.1 6.2 5 4.2 3.6 3.1 9.3 8 7 5.6 4.7 4 3.5 7 6 5.3 4.2 3.5 3 2.6 10.4 8.9 7.8 6.3 5.2 4.5 3.9 7.8 6.7 5.9 4.7 3.9 3.4 2.9 11.4 9.8 8.6 6.9 5.7 4.9 4.3 8.6 7.4 6.4 5.1 4.3 3.7 3.2 13.2 11.3 9.9 7.9 6.6 5.7 5 9.9 8.5 7.4 5.9 5 4.2 3.7 14.8 12.7 11.1 8.9 7.4 6.3 5.5 11.1 9.5 8.3 6.6 5.5 4.7 4.2 11.7 10 8.8 7 5.8 5 4.4 8.8 7.5 6.6 5.3 4.4 3.8 3.3 13 11.2 9.8 7.8 6.5 5.6 4.9 9.8 8.4 7.3 5.9 4.9 4.2 3.7 14.3 12.3 10.7 8.6 7.1 6.1 5.4 10.7 9.2 8 6.4 5.4 4.6 4 16.5 14.1 12.4 9.9 8.3 7.1 6.2 12.4 10.6 9.3 7.4 6.2 5.3 4.6 18.5 15.8 13.8 11.1 9.2 7.9 6.9 13.8 11.9 10.4 8.3 6.9 5.9 5.2 14 12 10.5 8.4 7 6 5.3 10.5 9 7.9 6.3 5.3 4.5 3.9 15.7 13.4 11.7 9.4 7.8 6.7 5.9 11.7 10.1 8.8 7 5.9 5 4.4 17.2 14.7 12.9 10.3 8.6 7.4 6.4 12.9 11 9.7 7.7 6.4 5.5 4.8 19.8 17 14.9 11.9 9.9 8.5 7.4 14.9 12.7 11.1 8.9 7.4 6.4 5.6 22 19 16.6 13.3 11.1 9.5 8.3 16.6 14.2 12.5 10 8.3 7.1 6.2

Off-Center Flat Fan Spray Tips

Brass (01 to 08;12;16 only) Part # OC01-BR

14 mph

Spraying Height “H”= 24" “W” in inches

Gallons Per Acre* 3 mph

4 mph

5 mph

75 77 78

4.5 5.1 6.1

3.4 3.9 4.6

2.7 3.1 3.7

4.0 4.5 5.4

80 83 85

6.4 7.2 8.6

4.8 5.4 6.5

3.9 4.3 5.2

5.7 6.4 7.7

4.6 5.1 6.2

93 94 95

7.5 8.4 10.2

5.6 6.3 7.7

4.5 5.1 6.1

10.4 11.8 14.2

7.8 8.8 10.6

6.2 7.1 8.5

108 110 111

9.5 10.8 13.0

7.2 8.1 9.8

5.7 6.5 7.8

100 102 104

13.7 15.5 18.7

10.2 11.6 14.0

8.2 9.3 11.2

110 112 113

12.4 14.1 17.2

9.3 10.6 12.9

7.5 8.5 10.3

1.04 1.20 1.47

102 104 105

20 23 28

15.1 17.1 21

12.1 13.7 16.6

113 115 116

18.2 21 25

13.7 15.5 18.8

10.9 12.4 15.1

1.39 1.60 1.96

132 138 143

21 23 27

15.6 17.2 20

12.5 13.8 16.3

142 146 148

19.4 22 26

14.5 16.3 19.7

11.6 13.0 15.7

* Gallons Per Acre coverage is based on water. See page 3 for conversion factors for other weight solutions.

1-800-373-4084

131

Spray Tips

15002 (100 Mesh)

Liquid Capacity Pressure 1 nozzle in PSI in GPM

Boomless Spray Tips Adjustable Single Off-Center Use this spray tip for tractor-mounted, boomless type nozzles. The single swivel nozzle may also be truck-mounted for roadside spraying.

Part # 4629-3/4-TOCxx

$181.21 H

*Replace xx with desired tip size.

Inlet connections are 3/4” NPT (F). Brass NPT (F) pipe connection. Extra wide flat spray coverage. Nozzle should be mounted at 36” height for maximum effective coverage.

Gallons per acre at 36” height and with follow mph

GPM/ width PSI nozzle (ft)

Tip # 4629-34-TOC10 4629-34-TOC20 4629-34-TOC40 4629-34-TOC80 4629-34-TOC150 4629-34-TOC300

30 40 60 30 40 60 30 40 60 30 40 60 30 40 60 30 40 60

0.87 1 1.2 1.7 2 2.4 3.5 4 4.9 7 8 9.8 13 15 18.4 26 30 36.7

18 18.5 18.5 23.5 24.5 24.5 26 27 27 29 30 30 30.5 31.5 31.5 32 33 33.5

mph 10

4.8 5.4 6.6 7.3 8.1 9.9 13.2 14.7 18 24 26 32 42 47 58 80 90 109

2.4 2.7 3.3 3.6 4 4.9 6.6 7.3 9 11.8 13.2 16.2 21 24 29 40 45 54

1.6 1.8 2.2 2.4 2.7 3.3 4.4 4.9 6 7.9 8.8 10.8 14.1 15.7 19.2 27 30 36

Spray Tips

Nonadjustable Double Spray

Part # 5880-3/4-2TOCxx

$274.51 H

*Replace xx with desired tip size.

This boomjet nozzle combines two off-center tips and three TeeJet® nozzles to produce an overall wide swath flat spray. Provides a wide pattern of coverage. The nozzle comes with one additional 1/4” NPT pipe plug and one blank tip for setting the BoomJet to spray to one side only. Type 5880 has a 1/4” NPT pressure gauge port.

XP BoomJet

n Perfect for boomless applications n Up to 18-1/2 ft. spray pattern n Unique pre-orifice minimizes drift n Superior spray pattern n 20-60 PSI range n Right side or Left side versions

132

Color Tip #

PSI

GPM/ Width nozzle 4 6.8 8.2 9.3

Gallons per acre at 36” spacing at the following MPH 5 7.5 10 15 5.4 3.5 2.7 1.8 6.6 4.4 3.3 2.2 7.5 5 3.7 2.5

5880-34-2TOC06

20 1.8 30 2.3 40 2.6

33.5 34 34.5

5880-34-2TOC10

20 2.8 30 3.5 40 4

39.5 40 40.5

8.9 10.7 12.2

7.1 8.6 9.8

4.7 5.7 6.5

3.5 4.3 4.9

2.4 2.9 3.3

5880-34-2TOC20

20 6.1 30 7.4 40 8.6

47 50 52

16 18.4 20

12.8 14.7 16.4

8.5 9.8 10.9

6.4 7.4 8.2

4.3 4.9 5.5

5880-34-2TOC40

20 12 30 14.7 40 17

56 60 63

27 30 33

21 24 27

14.2 16.2 17.8

10.6 12.1 13.4

7.1 8.1 8.9

W = maximum effective coverage with nozzle mounted at 36” height

Stainless steel available. Part # (right or left) 1/4XP20R-VP or 1/4XP20L-VP 1/4XP25R-VP or 1/4XP25L-VP 1/2XP40R-VP or 1/2XP40L-VP 1/2XP80R-VP or 1/2XP80L-VP

Thread 1/4” x 10 1/4” x 10 1/2” 1/2”

Price $53.08 H $53.08 H $63.22 H $63.22 H

www.horvick.com

Nitrogen Application Nitro-Bar Convert your sprayer into a nitrogen applicator nnApply nitrogen at the optimum time for increased yields nnWhen used with the Air Tram (tramlines), nitrogen can be applied with unparalleled accuracy nnColor coded orifice adaptors allow quick change to adapt to all application rates. Five different orifice adapters cover flow rates from 5-80 gallons per acre. nozzle spacing on sprayers, using the universal TeeJet or Hardi adaptors, the Nitro-Bar can be fitted to your sprayer in minutes. Part # Description Price 1040739 Nitro-Bar, less Orifice/Adaptor $8.50 C 1040753 TeeJet Orange adpt $3.50 C 1040740 TeeJet Red adpt $3.50 C 1040741 TeeJet Blue adpt $3.50 C 1040742 TeeJet Yellow adpt $3.50 C 1040743 TeeJet Green adpt $3.50 C 1040744 Hardi Red adpt $7.00 C 1040749 Hardi Blue adpt $7.00 C 1040750 Hardi Yellow adpt $7.00 C 1040751 Hardi Green adpt $7.00 C 7717-2-110-BU O-ring $0.64 H

Fertilizer contact with the crop is minimized be the configuration of the Nitro-Bar and by the large droplets produced at the leaf surface. This enables the fertilizer to roll off the foliage quickly, virtually eliminating the risk of leaf burn. Nitro-Bars fit the standard 20”

TeeJet StreamJet®

* Tables are based on water output. Fertilizer will decrease the output by approximately 13% or more, depending on viscosity and temperature of the product. Be sure to run a calibration check before using. Do not use if wind is causing stream to break up Do not travel more than 10 mph. Warranty will be void Do not use more than 40 PSI

3 or 7 stream tips

3 Streams nn Visaflo color system nn 3 solid streams of equal velocity and capacity nn Removable metering orifice for easy cleaning nn Nine sizes for a wide range of application rates nn Equally spaced distribution at 20” height nn Fits in QuickJet cap # 25598-* SJ3-xx-VP

$9.42 H

7 Streams nnCreates seven identical fluid streams of equal velocity/capacity nnExcellent spray pattern distribution nnRemovable metering orifice nnColor coded nn20-62 PSI pressure range nnExcellent for liquid fertilizer SJ7-xx

$12.00 H

1-800-373-4084

Tip Color Tip # Liquid Capacity Gallons per Acre – 20” Spacing VisiFlo (Strainer Pressure 1 Nozzle 3 4 5 6 8 10 12 Mesh Size) (PSI) (GPM) mph mph mph mph mph mph mph GREEN SJ3-015-VP 20 0.11 11.2 8.4 6.7 5.6 4.2 3.4 2.8 (100) 30 0.13 13.2 9.9 7.9 6.6 4.9 4.0 3.3 40 0.15 14.9 11.1 8.9 7.4 5.6 4.5 3.7 60 0.17 17.2 12.9 10.3 8.6 6.5 5.2 4.3 YELLOW SJ3-02-VP 20 0.14 14.2 10.6 8.5 7.1 5.3 4.2 3.5 (50) 30 0.17 17.1 12.8 10.3 8.6 6.4 5.1 4.3 40 0.20 19.8 14.9 11.9 9.9 7.4 5.9 5.0 60 0.22 22 16.6 13.3 11.1 8.3 6.7 5.5 BLUE SJ3-03-VP 20 0.24 23 17.4 14.0 11.6 8.7 7.0 5.8 (50) 30 0.27 27 20 16.1 13.4 10.1 8.0 6.7 40 0.30 30 22 17.8 14.9 11.1 8.9 7.4 60 0.35 35 26 21 17.4 13.1 10.5 8.7 RED SJ3-04-VP 20 0.30 29 22 17.6 14.7 11.0 8.8 7.3 (50) 30 0.36 35 27 21 17.7 13.3 10.6 8.9 40 0.40 40 30 24 19.8 14.9 11.9 9.9 60 0.47 46 35 28 23 17.3 13.9 11.6 BROWN SJ3-05-VP 20 0.36 35 26 21 17.6 13.2 10.6 8.8 (50) 30 0.45 45 33 27 22 16.7 13.4 11.1 40 0.50 50 37 30 25 18.6 14.9 12.4 60 0.59 58 44 35 29 22 17.4 14.5 GRAY SJ3-06-VP 20 0.42 42 31 25 21 15.6 12.5 10.4 (50) 30 0.54 53 40 32 27 19.9 15.9 13.3 40 0.60 59 45 36 30 22 17.8 14.9 60 0.70 70 52 42 35 26 21 17.4 WHITE SJ3-08-VP 20 0.56 56 42 33 28 21 16.7 13.9 30 0.72 72 54 43 36 27 22 17.9 40 0.80 79 59 48 40 30 24 19.8 60 0.94 93 70 56 47 35 28 23 L. BLUE SJ3-10-VP 20 0.65 65 49 39 32 24 19.4 16.2 30 0.90 89 67 54 45 34 27 22 40 1.00 99 74 59 50 37 30 25 60 1.19 118 88 71 59 44 35 29 L. GREEN SJ3-15-VP 20 0.99 98 74 59 49 37 29 25 30 1.24 123 92 74 61 46 37 31 40 1 .50 149 111 89 74 56 45 37 60 1.83 181 136 109 91 68 54 45 Application data is based on spraying water at 70° F.

133

Spray Tips

Nitro-Bars produce a stream of liquid to each port, with no overlapping pattern. This means extremely high application accuracy and is unaffected by boom height or movement. Allows applications of nitrogen throughout the growing season.

PSI GPM Speed (MPH) Water* 5 6 7 8 9 10 20 0.19 11.2 9.3 8.0 7.0 6.2 5.6 25 0.21 12.5 10.4 8.9 7.8 6.9 6.2 30 0.23 13.7 11.4 9.8 8.5 7.6 6.8 35 0.25 14.8 12.3 10.6 9.2 8.2 7.4 40 0.27 15.8 13.2 11.3 9.9 8.8 7.9 ————————————————————— 20 0.34 20 16.9 14.5 12.7 11.3 10.2 25 0.38 23 19.0 16.3 14.2 12.6 11.4 30 0.42 25 21 17.8 15.6 13.8 12.4 35 0.45 27 22 19.2 16.8 14.9 13.5 40 0.48 29 24 21 18.0 16.0 14.4 ————————————————————— 20 0.55 33 27 24 21 18.3 16.5 25 0.62 37 31 26 23 20 18.4 30 0.68 40 34 29 25 22 20 35 0.73 44 36 31 27 24 22 40 0.78 47 39 33 29 26 23 ————————————————————— 20 0.81 48 40 34 30 27 24 25 0.90 54 45 38 33 30 27 30 0.99 59 49 42 37 33 29 35 1.07 64 53 45 40 35 32 40 1.14 68 56 48 42 38 34 ————————————————————— 20 1.08 64 53 46 40 36 32 25 1.20 71 59 51 45 40 36 30 1.32 78 65 56 49 44 39 35 1.43 85 71 61 53 47 42 40 1.52 90 75 64 56 50 45

Hypro Spray Tips What is FastCap Style? Order the Hypro spray tips with the FastCap and you get the spray tip, quick-connect cap, and gasket pre-assembled. The spray tip number is printed on the FastCap for easy identification.

Hypro Guardian Spray Tips Guardian spray tips are ready to attack from every angle. Ideal for insecticide and fungicide applications, the Guardian’s unique 20° inclined spray pattern allows users to adjust the spray rearward, forward or as a twin spray to best suit the application target.

Guardian with cap

Spray Tips

Part # GRD120-01 GRD120-015 GRD120-02 GRD120-025 GRD120-03 GRD120-04 GRD120-05 GRD120-06 GRD120-08

Price ea. $7.13 H $7.13 H $7.13 H $7.13 H $7.13 H $7.13 H $7.13 H $7.13 H $7.13 H

Ultra Lo-Drift™ Spray Tips The Ultra Lo-Drift™ is the ideal spray tip for use where drift reduction is paramount. The tip produces large air-filled droplets, which cut drift dramatically compared with a standard fan and conventional lowdrift spray tips. Ideal for use with pre-emergence and broad spectrum products. Part #

Price ea.

ULD120-015 ULD120-02 ULD120-03 ULD120-04 ULD120-05 ULD120-06

$8.83 $8.83 $8.83 $8.83 $8.83 $8.83

H H H H H H

Fast Cap available

just add FC- before the ULD

Hypro Twin Cap

Hypro GuardianAIR Spray Tips nnOptimized for the performance and productivity nnProduces air-induced sprays for reduced drift and environmental impact nnSpray incline is speed-optimized nnBoosts productivity with tip sizes for speeds from 3 to over 20 MPH, including the only size “035” tip of its kind with a 10-14 MPH sweet spot

Fit any two twin caps into this special cap. Nozzles will spray 30 degrees fore/aft of center for better crop penetration. Part # 152607TC

$5.11 H

NOTE: All the spray tips on this page use the standard flow system. For example, the TR80-01 is equivalent to any standard 8001 tip. Use charts on pages Page 124-Page 125

FastCap Style Part # GA110-015 GA110-02 GA110-025 GA110-03 GA110-035 GA110-04 GA110-05

Price ea. $7.95 H $7.95 H $7.95 H $7.95 H $7.95 H $7.95 H $7.95 H

Part # FC-GA110-015 FC-GA110-02 FC-GA110-025 FC-GA110-03 FC-GA110-035 FC-GA110-04 FC-GA110-05

134

Price ea. $9.33 H $9.33 H $9.33 H $9.33 H $9.33 H $9.33 H $9.33 H

www.horvick.com

Note: Always insert Orifice Plate with side marked with number facing the outlet.

Flow Regulators are usually mounted Assembly Flow Regulators areTypical usually mounted behind cultivator shanksbehind for the cultivator shanks for the subsurface subsurface application of liquid application of liquid fertilizers and soil fertilizers and soil fumigants. They fumigants. They are also used for aboveare also used for above-ground ground streaming applications. streaming applications. Part #

ays insert Orifice side marked with cing the outlet.

How to order: example:4916-14

1/4TT Body

ber.

On orifice sizes smaller than #32 use 100 mesh screens. Use 50 mesh on sizes 35-49. 5053 Strainer

5053 Strainer

GPM (Per Nozzle)

GPA plates you need, use

GPM 60 PSI

0.007 0.008 0.009 0.010 0.011 0.013 0.015 0.016 0.016 0.019 0.021 0.023 0.022 0.025 0.028 0.031 0.025 0.029 0.032 0.036 0.029 0.033 0.037 0.040 0.036 0.042 0.047 0.051 0.045 0.052 0.058 0.064 0.053 0.061 0.068 0.075 0.064 0.074 0.083 0.091 0.068 0.079 0.088 0.097 0.074 0.086 0.096 0.105 0.079 0.091 0.102 0.111 0.085 0.098 0.110 0.120 0.094 0.108 0.121 0.132 0.099 0.114 0.127 0.140 0.107 0.123 0.138 0.151 0.117 0.135 0.151 0.165 0.127 0.147 0.164 0.180 0.136 0.157 0.176 0.192 0.149 0.172 0.192 0.211 0.165 0.191 0.214 0.234 0.177 0.204 0.228 0.250

0.183 0.211 0.236 0.258 0.200 0.231 0.258 0.283 0.217 0.250 0.280 0.306 0.234 0.270 0.302 0.331

Nozzle spacing (in inches) for broadcast spraying.

GPA x MPH x W 5,940

Spray width (in inches) for single nozzle, band spraying or boomless spraying.

5,940 x GPM (Per Nozzle) MPH x W

Row spacing (in inches) divided by the number of nozzles per row for directed spraying.

Nozzle spacing (in inches) GPM for broadcast spraying.

Tabulated flow rates are for spraying water into air atmospheric pressure. If your application creates backpressure, or if spraying into a liquid, measure and calibrate to ensure proper application rates.

30 PSI

40 PSI

50 PSI

60 PSI

0.010

Tabulated flow rates are for spraying water GPMIf your into air atmospheric pressure. application creates backpressure, or if 50 60 5 10 20 30 40 PSI measure PSI PSI andPSI PSI PSI spraying intoPSIa liquid, calibrate to ensure proper application rates. 0.097 0.138 0.194 0.238 0.275 0.307 0.337 CP4916-47

CP4916-98 0.442 0.625 0.884 1.08

1.25

1.40

1.53

CP4916-10 0.005 0.007 0.009 0.011 0.013 0.015 0.016

CP4916-48 0.101 0.143 0.202 0.248 0.286 0.320 0.350

CP4916-103 0.461 0.653 0.923 1.13

1.31

1.46

1.60

CP4916-12 0.007 0.010 0.013 0.016 0.019 0.021 0.023

CP4916-49 0.104 0.148 0.209 0.255 0.295 0.330 0.361

CP4916-107 0.518 0.733 1.04

1.27

1.47

1.64

1.79

CP4916-51 0.116 0.165 0.233 0.285 0.329 0.368 0.403

CP4916-110 0.548 0.775 1.10

1.34

1.55

1.73

1.90

CP4916-15 0.010 0.015 0.021 0.025 0.029 0.032 0.036

CP4916-52 0.118 0.168 0.237 0.290 0.335 0.375 0.410

CP4916-115 0.605 0.855 1.21

1.48

1.71

1.91

2.09

0.029 0.033 0.037 0.040 CP4916-16 0.012 0.017 0.023 GPM

0.312 0.360 0.402 0.441 CP4916-54 0.127 0.180 0.255GPM

CP4916-120 0.629 0.890 1.26

1.54

1.78

1.99

2.18

CP4916-18 0.015 0.021 0.030 0.036 0.042 0.047 0.051

CP4916-55 0.133 0.189 0.267 0.326 0.377 0.421 0.462

CP4916-125 0.693 0.980 1.39

1.70

1.96

2.19

2.40

CP4916-20 CP4916-47 0.097 0.022 0.138 0.031 0.194 0.043 0.238 0.053 0.275 0.061 0.307 0.068 0.337 0.075 CP4916-22 CP4916-48 0.101 0.026 0.143 0.037 0.202 0.052 0.248 0.064 0.286 0.074 0.320 0.083 0.350 0.091 CP4916-24 CP4916-49 0.104 0.028 0.148 0.040 0.209 0.056 0.255 0.068 0.295 0.079 0.330 0.088 0.361 0.097 CP4916-25

CP4916-57 CP4916-98 0.1530.625 0.2170.884 0.3061.08 0.3751.25 0.4331.40 0.4841.530.530 CP4916-590.442 CP4916-103 0.1650.653 0.2330.923 0.3301.13 0.4041.31 0.4661.46 0.5211.600.571 CP4916-610.461

CP4916-128 0.721 1.02

1.44

1.77

2.04

2.28

2.50

CP4916-132 0.774 1.10

1.55

1.90

2.19

2.45

2.68

CP4916-136 0.840 1.19

1.68

2.06

2.38

2.66

2.91

CP4916-107 0.1740.733 0.2461.04 0.3471.27 0.4251.47 0.4911.64 0.5491.790.601 CP4916-630.518 CP4916-110 0.1850.775 0.2611.10 0.3691.34 0.4521.55 0.5221.73 0.5841.900.639 CP4916-650.548

CP4916-140 0.894 1.27

1.79

2.19

2.53

2.83

3.10

CP4916-144 0.926 1.31

1.85

2.27

2.62

2.93

3.21

CP4916-115 0.1960.855 0.2781.21 0.3921.48 0.4811.71 0.5551.91 0.6212.090.680 CP4916-670.605 CP4916-120 0.2030.890 0.2871.26 0.4051.54 0.4961.78 0.5731.99 0.6412.180.702 CP4916-680.629

CP4916-147 0.953 1.35

1.91

2.33

2.70

3.01

3.30

CP4916-151 1.04

1.47

2.08

2.55

2.94

3.29

3.60

CP4916-156 1.10

1.55

2.20

2.69

3.11

3.47

3.80

CP4916-161 1.15

1.63

2.31

2.83

3.27

3.65

4.00

CP4916-166 1.21

1.72

2.43

2.97

3.43

3.84

4.20

CP4916-170 1.30

1.84

2.61

3.19

3.69

4.12

4.51

CP4916-172 1.36

1.92

2.71

3.32

3.84

4.29

4.70

CP4916-177 1.41

2.00

2.83

3.46

4.00

4.47

4.90

CP4916-182 1.47

2.08

2.95

3.61

4.17

4.66

5.10

CP4916-187 1.56

2.21

3.12

3.82

4.41

4.93

5.40

CP4916-196 1.73

2.45

3.46

4.24

4.90

5.47

6.00

CP4916-205 1.88

2.65

3.75

4.59

5.31

5.93

6.50

CP4916-218 2.11

2.98

4.21

5.16

5.96

6.66

7.30

CP4916-234 2.45

3.47

4.91

6.01

6.94

7.76

8.50

CP4916-250 2.83

4.00

5.66

6.93

8.00

8.94

9.80

5 10 20 30 40for 50 Spray width (in inches) PSI PSI PSI PSI PSI PSI single nozzle, band spraying 0.003 0.004 0.006 0.007 0.008 0.009 CP4916-008 or boomless spraying.

0 x GPM (Per Nozzle) MPH x W

GPA x MPH x W 5,940

50 PSI

1325 Cap

4916 Orifice Plate

To determine the orifice plates you need, use the following equations:

1325 Cap

4916 Orifice Plate

60 PSI

Row spacing (in inches) divided by the number of nozzles per 0.009 for 0.013 0.018 0.022 0.025 0.028 0.031 CP4916-14 row directed spraying.

5 10 20 30 40 50 60 PSI PSI PSI PSI PSI PSI 0.018 0.026 0.037 0.045 0.052 0.058 PSI 0.064

CP4916-51 0.116 0.030 0.165 0.043 0.233 0.061 0.285 0.074 0.329 0.086 0.368 0.096 0.403 0.105 CP4916-26 CP4916-52 0.118 0.032 0.168 0.046 0.237 0.064 0.290 0.079 0.335 0.091 0.375 0.102 0.410 0.111 CP4916-27

CP4916-54 0.127 0.035 0.180 0.049 0.255 0.069 0.312 0.085 0.360 0.098 0.402 0.110 0.441 0.120 CP4916-28 0.189 0.267 0.326 0.377 0.421 0.462 CP4916-55 0.133 0.038 0.054 0.076 0.094 0.108 0.121 0.132 CP4916-29

5 10 20 30 40 50 60 PSI 0.141 PSI 0.200 PSI 0.283PSI 0.346PSI0.400PSI0.447PSI0.490

0.141 0.200 0.283 0.346 0.400 0.447 0.490 0.040 0.057 0.081 0.099 0.114 0.127 0.140 0.153 0.217 0.306 0.375 0.433 0.484 0.530 0.043 0.062 0.087 0.107 0.123 0.138 0.151 0.165 0.233 0.330 0.404 0.466 0.521 0.571 0.048 0.068 0.095 0.117 0.135 0.151 0.165 0.174 0.246 0.347 0.425 0.491 0.549 0.601 0.052 0.074 0.104 0.127 0.147 0.164 0.180 0.185 0.261 0.369 0.452 0.522 0.584 0.639 0.056 0.079 0.111 0.136 0.157 0.176 0.192 0.196 0.278 0.392 0.481 0.555 0.621 0.680 0.061 0.086 0.122 0.149 0.172 0.192 0.211 0.203 0.287 0.405 0.496 0.573 0.641 0.702 0.068 0.096 0.135 0.165 0.191 0.214 0.234 0.216 0.306 0.433 0.530 0.612 0.684 0.750 0.072 0.102 0.144 0.177 0.204 0.228 0.250 0.226 0.320 0.453 0.554 0.640 0.716 0.784 0.075 0.106 0.149 0.183 0.211 0.236 0.258 0.233 0.330 0.467 0.572 0.660 0.738 0.808 0.082 0.116 0.163 0.200 0.231 0.258 0.283 0.245 0.347 0.491 0.601 0.694 0.776 0.850 0.088 0.385 0.125 0.544 0.177 0.667 0.217 0.770 0.250 0.861 0.280 0.943 0.306 CP4916-45 CP4916-78 0.272

CP4916-125 0.2160.980 0.3061.39 0.4331.70 0.5301.96 0.6122.19 0.6842.400.750 CP4916-700.693 CP4916-128 0.721 1.02 1.44 1.77 2.04 2.28 2.50 CP4916-72 0.226 0.320 0.453 0.554 0.640 0.716 0.784 CP4916-132 0.774 1.10 1.55 1.90 2.19 2.45 2.68 CP4916-73 0.233 0.330 0.467 0.572 0.660 0.738 0.808 CP4916-136 0.840 1.19 1.68 2.06 2.38 2.66 2.91 CP4916-75 0.245 0.347 0.491 0.601 0.694 0.776 0.850 CP4916-140 0.894 1.27 1.79 2.19 2.53 2.83 3.10 CP4916-78 0.272 0.385 0.544 0.667 0.770 0.861 0.943 CP4916-144 0.926 1.31 1.85 2.27 2.62 2.93 3.21 CP4916-80 0.280 0.397 0.561 0.687 0.793 0.887 0.971 CP4916-147 0.953 1.35 1.91 2.33 2.70 3.01 3.30 CP4916-81 0.290 0.411 0.581 0.711 0.821 0.918 1.01 CP4916-151 1.04 1.47 2.08 2.55 2.94 3.29 3.60 CP4916-83 0.317 0.449 0.634 0.777 0.897 1.00 1.10 CP4916-156 1.10 1.55 2.20 2.69 3.11 3.47 3.80 CP4916-86 0.332 0.470 0.664 0.813 0.939 1.05 1.15 CP4916-161 1.15 1.63 2.31 2.83 3.27 3.65 4.00 CP4916-89 0.346 0.490 0.693 0.849 0.980 1.10 1.20 CP4916-166 1.21 1.72 2.43 2.97 3.43 3.84 4.20 CP4916-91 0.369 0.523 0.739 0.905 1.05 1.17 1.28 CP4916-170 1.30 1.84 2.61 3.19 3.69 4.12 4.51 0.3871.92 0.5472.71 0.7743.32 0.9473.84 1.09 4.29 1.22 4.70 1.34 CP4916-931.36 CP4916-172

CP4916-86 0.332 0.470 0.664 0.813 0.939 1.05

1.15

CP4916-196 1.73

2.45

3.46

4.24

4.90

5.47

0.980 1.10

1.20

CP4916-205 1.88

2.65

3.75

4.59

5.31

5.93

6.50

CP4916-57 CP4916-30 CP4916-59 CP4916-31 CP4916-61 CP4916-32 CP4916-63 CP4916-34 CP4916-65 CP4916-35 CP4916-67 CP4916-37 CP4916-68 CP4916-39 CP4916-70 CP4916-40 CP4916-72 CP4916-41 CP4916-73 CP4916-43 CP4916-75

0.4042.00 0.5722.83 0.8083.46 0.9904.00 1.14 4.47 1.28 4.90 1.40 0.095 0.397 0.135 0.561 0.191 0.687 0.234 0.793 0.270 0.887 0.302 0.971 0.331 CP4916-46 CP4916-951.41 CP4916-80 0.280 CP4916-177 Note: Always0.290 double check your0.711 application rates. Tabulations are based 1.47 on spraying water at 70°F4.17 (21°C).4.66 5.10 0.411 0.581 0.821 0.918 1.01 2.08 2.95 3.61 CP4916-81 CP4916-182 See pages 173–187 for useful formulas and information. CP4916-83 0.317 0.449 0.634 0.777 0.897 1.00 1.10 CP4916-187 1.56 2.21 3.12 3.82 4.41 4.93 5.40

FERTILIZER 0.490 0.693 0.849 CP4916-89 0.346NOZZLES

1.17

1.28

CP4916-218 2.11

2.98

4.21

5.16

5.96

6.66

7.30

CP4916-93 0.387 0.547 0.774 0.947 1.09

1.22

1.34

CP4916-234 2.45

3.47

4.91

6.01

6.94

7.76

8.50

CP4916-95 0.404 0.572 0.808 0.990 1.14

1.28

1.40

CP4916-250 2.83

4.00

5.66

6.93

8.00

8.94

9.80

r application rates. Tabulations are based on spraying water at 70°F (21°C). rmulas and information.

10 PSI

20 PSI

6.00

CP4916-91 0.369 0.523 0.739 0.905 1.05

1-800-373-4084

GPM 5 PSI

135

Spray Tips

1322 1/4TT Body

40 PSI

NOTE on Selecting Strainer Size:

Typical Assembly

ly mounted for the f liquid ants. They ground

30 PSI

NOTE: Always insert orifice plate with sided marked with number facing the outlet of the nozzle body.

How to order:

Specify orifice $3.29 H plate number. Specify orice plate number.Example: CP4916-008 1322 Example: CP4916-008

: Stainless Steel

Orifice Plates

MATERIAL: Stainless Steel

Flow Monitors Flow View Modular Flow Indicator Parts Replacement Parts Description Red Ball, glass

20460-01

20460-00

20460-02

Spray Tips

20501-00

20460-03

20502-00

20460-04

20503-00

Red Ball, Celcon Green Ball Black Ball White Ball Steel Ball

Redball RB-BALL$1.14 R/G RB-BALL-R $0.92 RB-BALL-G $0.92 RB-BALL-B $0.92 RB-BALL-W $0.92 RB-BALL-S $1.55

Blank Disc Check Valve Hose Barb Elbow, 1/2” Hose Barb Elbow, 3/8”

RB-BLANK RB-CHK RB-HBE12 RB-HBE38

Swivel Nut Retainer Ring Hose Shank, 1/2” Hose Shank. 3/8” Washer U Pin Hose Barb Hose Barb Hose Barb Hose Barb

20511-00

20518-00

20512-00

20519-00

20521-00

20513-00

20520-00

20522-00

Elbow, Elbow, Elbow, Elbow,

1/4” 3/8” 1/2” 3/4”

Float Stop Cap Single Column Body Only O-Ring Top Adaptor X 1/4” FPT Top Adaptor X 1/4” FPT Elbow Tee Adaptor, M X M X F Tee Adaptor, M X M X 1” Fpt Flow Indicator Ass’m Flow Indicator Body M X 3/4 Hose End Cap W/ Clip

Wilger Notes V 20460-06 $0.74 H V 20460-07 V 20460-08 V 20460-09 V V

$0.74 H $0.74 H $0.74 H

$0.63 V $19.73 H $2.29 V $2.29 V

3 3 3 3

RBN34 RB-RR RB-HS12 RB-HS38 RBW34

$1.49 $0.34 $1.72 $1.72 $0.63

V V V V V

3 3 3 3 3

002037 002133 002134 002135 002136

$1.55 $1.55 $1.55 $1.55 $1.55

V V V V V

002137 002138 002139

20460-04

$1.54 H

20511-00 20512-00 20513-00

$2.92 H $2.92 H $2.92 H

1 1 1,2 1,2 1,2

$0.63 V 20460-02 $1.55 V 20521-00 $12.14 V 20460-03 20519

$0.63 H $3.49 H

1 1

$0.29 H $2.92 H

20518-00

$2.92 H

20522 20525

$7.80 H $7.80 H

1 1

20460-00 20460-01

$22.24 H $14.21 H

20503-00 20521-00

$2.92 H $3.49 H

NOTES 1 Interchangeable 2 Wilger style less O-ring 3 Screw style (old style)

20523-00

20525-00

21104-00 Float Balls

20537-00

136

www.horvick.com

Fertilizer Starter Kits Planter Manifold Kits QuickJet plumbing is now featured on our planter manifold kit. Combined with John Guest quick-connect fittings, the manifolds are now easier than ever to change orifices or cleaning the screens. Manifold kit includes predrilled PVC pipe, nozzle bodies, and J-G fittings. Order orifices, screens, and plumbing separately. n Available in 8 or 12 outlet configurations. n QuickJet bodies with diaphragm check valve n Mounting straps and u-bolts for 7” x 7” bar n Simplified plumbing with in-cab speed control standard n Optional auto-rate control

PMK-JB-8

Planter Manifold Kits

Tanks on Pages 10-15

SMSS4

Trailers on Pages 25-29

Description QuickJet 8 Row QuickJet 12 Row

$109.00 V $144.00 V

PMK-JB-8 PMK-JB-12

CDS/JB 8 Row CDS/JB 12 Row

$295.00 V $425.00 V

SMSS1 CDS 1-column monitor assy $22.72 V SMSS4 CDS 4-column monitor assy $71.49 V Redball, Wilger, John Blue have interchangeable parts except columns PMK-RB-8 PMK-RB-12

7870-101E-SB

Price

Redball 8 Row Redball 12 Row

$305.00 V $435.00 V

3999-0002 4-column monitor assy-3/8” $79.00 V 3999-0038 1-column monitor assy-3/8” $27.31 V Redball, Wilger, John Blue have interchangeable parts except columns

Pumps

5850-101E

Part #

Description

Price

7870-101E-SB FATBOY 12V PUMP 7gpm 1/2” $259.00 V 5850-101E 12V PUMP 5.3gpm 60# 2P 1/2” $149.00 V 2088-313-145 3.6GPM VIT VLVS,12V,45# 1/2 $217.00 V Recommended electric pumps, see more on Page 42 & Page 43

9303

9303C-HM4C CI HYD PMP C/O 95g 1.5x1.25 $1,066.00 H 9302CT-GM1 Recommended centrifugal pumps, see more on Page 45 1700C HYPRO 5 ROLLER PUMP CST IRN $415.00 H 7560XL HYP ROLLER PUMP-SILVER SRS. $766.00 H 4101N HYP 4 ROLLER PUMP NI-RESIST $333.00 H Recommended roller pumps, see more options on Page 47

NGP-6055

NGP-6055 LO-VOL SGL PISTON PUMP $1,873.32 V NGP-7055 HI-VOL SGL PISTON PUMP $2,194.37 V PP1 DEMCO GROUND DRIVE PUMP $1,530.00 K PP2 DBL.PIST.PUMP, W/MANUAL S/O $2,228.00 K Recommended ground drive pumps, see more on Page 49

NGP-7055

1-800-373-4084

137

Spray Tips

SMSS1

Part # PMK-8-QJ PMK-12-QJ

Fertilizer Starter Kits Tanks on Pages 10-15

Plumbing Kits

Trailers on Pages 25-29

Part #

Description

PK-PMK-E 3BEC30-NG-2

PMK Plumbing Kit W/Spd Ctrl Controller, Line Strainer, Gauge, Hose, Fittings, Base Start PMK TT Plbg Kit W/Elec Ctrl Controller, Line Strainer, Gauge, Hose, Fittings, Base Start

PK-PMK-H SCS-11

Price $525.00 V $239.00 V $815.00 V $302.00 M

214-0001-001 214-0001-001B EVA038 EVA038-B EVA050 EVA050-B

1/4”od X .170 Air Tubing Black 1/4”x .170 Air Tubing EVA Sprayer Hose 3/8” Black EVA Hose 3/8” Bulk EVA Sprayer Hose 1/2” Black EVA Hose 1/2” Bulk

$0.31 H $0.31 H $0.61 V $0.61 V $0.75 V $0.75 V

REB-ST-Y 45494

Orange Rebounder with ”Y” Kit $35.00 W Tube Holder JD7200/7300 $11.13 NET Call for other options

Fittings / Valves Part #

Spray Tips

JGCV

JGME

JGMC

QJ98592

QJ98586

Description

Price

JGCV44 Check Valve, 1/4 Tube OD $14.50 JGCV66 Check Valve, 3/8 Tube OD $15.00 JGMC44 1/4”MPT x Tube OD Connector $3.33 JGME44 1/4” MPT X 1/4” Tube, ELBOW $5.14 JGMC66 STRT 3/8” MPT X Tube $5.73 JGME66 3/8 MPT x 3/8 OD EL COMP FTG $8.45 Check out page 59 for John Guest fitting options

H H H H H H

QJ98586-3/8 QJ98588-1/4 QJ98590-3/8-2 QJ98592-1/4-2 QJ98592-1/4-10 QJ98598-90-1/4 QJ98599-90-3/8

H H H H H H H

JG JG JG JG JG JG JG

QJ QJ QJ QJ QJ QJ QJ

Cap 3/8” W/18999 GSKT Cap 1/4” W/18999 GSKT Body 3/8” 2# Body 1/4” 2# Body 1/4” 10# 90° Cap 1/4” 90° Cap 3/8”

$5.96 $5.96 $12.40 $12.40 $12.40 $7.45 $7.45

Redball Spray Monitor Redball Spray Monitor is a simple gauge to visually monitor proper flow rate of liquid fertilizer and herbicide applications. It shows immediately if a nozzle becomes plugged as little as 10% and it shows, at a glance, any variation in your application rate.

3/8” barbs Part # 3376-0002 ............... $79.00 Modular 4 column Part # 3999-0002 ............... $79.00 Modular 1 column add on Part # 3999-0038 .............. $27.31

V V V

138

Redball Spray Monitor has no mechanical or electronic parts to malfunction. Manufactured of a high-impact plastic, unaffected by chemical corrosion. Redball accurately monitors application rates. Why take chances on plugged nozzles when you can use REDBALL SPRAY MONITOR?

Part # Description RBW34 Washer, 3/4” monitor EPDM RBN34 Nut, monitor poly 3/4” RB-BLANK Disc blank RB-BALL Ball (specify color–4 required) *plastic RB-BALL-S Ball (stainless steel) RB-HBE12 Elbow, 1/2” 90º -OPTIONALRB-HBE38 Elbow, 3/8” 90º RB-RR Retaining ring RB-HS12 1/2” straight barb RB-HS38 3/8” straight barb * Redball ball colors: red, green, black, & white (ex. RB-BALL-R)

Price $0.63 V $1.49 V $0.63 V $1.00 V $1.55 V $2.29 V $2.29 V $0.34 V $1.72 V $1.72 V

www.horvick.com

Fertilizer Starter Kits Micro-Trak SafeGuard Blockage Monitor

Spray Tips

Safe Guard™ electronically detects blockages and alerts you with an audible alarm and a visual display of the blocked row’s number. Reduce over and under application, save money, and apply liquid fertilizer with confidence without having to watch flow monitors or outlets.

Micro-Trak’s SAFEGUARD Advantages n Instantly detects and alerts the operator of blockages without seeing the sensor – blockage is detected while your attention is diverted. n HEAR what you’ve been missing – Audible alarm immediately alerts operator of blockage. n SEE what you’ve been missing – Display immediately alerts operator of blockage. n Continuously monitors all the runs. n Same performance day, night, rain or shine! n Not affected by cloudy or dark liquids. n Works for a wide variety of product applications — starter fertilizers, herbicides, insecticides, fungicides, fumigants, etc.

Blockage Sensor Details Standard Outlet Fitting Durable Case Material Cartridge and Chamber Window Standard O-Ring and U-Clip Connectivity

Ganged Sensor Installation

1-800-373-4084

139

NH3 Knives TK Heavy Duty NH3 Applicator Knife

Weise Applicator Knives Features hard surfacing and a 3/8” tube.

With Chromium Carbide Tip TK-NH3-12

$37.00 V

TK-NH3-38

Hard surfaced Part # AT50

Replacement tip Part # CI-12

Plain Part # AT50-P

$46.00 V

$22.00 V

$10.95 V

$36.00 V

TK-NH3

Extra-thin knife with a 3/8” tube for NH3 or liquid application.

CO-50

nnUsed with coulters.

Old Style Parts

Hard surfaced Part # CO-50

Plain Part # CO-50-P

$42.00 V

$21.00 V

TK-HOR

Chisel Plow NH3 Knife Part # Description TK-RT Replacement tip TK-TP Tube Protector – Osmundson TK-TP-S Tube Protector – Shield *Limited Supply

Price $19.75 V $6.00 V $4.75 V

Our toughest knife–heavy duty chrome tip! CP-HOR

CP-HOR (3/8” Tube)

$37.00 V

CP-HOR-12 (1/2” Tube)

$41.00 V

ReplacementTip CP-RT

Schedule 40 Replacement Tubes

$12.00 V

CP-RT

Knives & Accessories

AAT-38 / AAT-12

These are replacement tubes for NH3 AATC-38 / AATC-12 or liquid fertilizer knives. They are made of schedule AATC-38UV 40 pipe and all are 12” long unless AATC-38CP noted otherwise below. The open tubes are for NH3 and liquids; the pinched tubes have two 3/16” holes for NH3. Part # Diameter Description Price (in.) AAT-38 3/8” open tube, straight $2.50 V AAT-12CP 1/2” formed/pinched $4.25 V AAT-1216 1/2” open, 16” long $3.25 V AATC-12 1/2” pinched tube, straight $4.00 V AATC-12CP 1/2” formed/pinched $4.75 V AATC-38 3/8” pinched tube, straight $2.85 V AATC-38CP 3/8” formed/pinched $3.50 V AATC-38UV 3/8” formed/pinched $4.90 V 10233 1/2” MT-3500 (Micro-Trak) $39.12 V 214-0002-002 3/4” Accu-Flow (Raven) $11.43 M

Field Cultivator NH3 Knives The DT-3 is developed for 1-3/4” wide shanks when applying anhydrous with field cultivators. 7/16” punchings on 1-3/4” to 2” centers.

CI6

DT4-CI6

Redesigned Dual Tillage Knife Part # Description DT-3 Hard surfaced DT-3-P Plain

Price $31.00 V $19.00 V

Front Swept Part # Description DT-4 Hard surfaced DT-4-P Plain DT4-CI6 Chrome insert CI6 Replacement Tip

140

DT-3

Price $31.00 V $18.00 V $34.00 V $10.95 V

www.horvick.com

NH3 Knives Wiese Chisel Plow Knife

Ray-Mac Conversion Tubes Mounts behind the shank. Unique cone shaped outlet minimizes plugging. For chisel plows & field cultivators, 3/8” tubes & 1/2” tubes.

CI4 CP65

CP70-CI4

Chisel Plow Knife Part # Description CP65 Hard surfaced CP65-P Plain CP65-12 Hard surface (1/2”)

Price $39.00 V $24.00 V $40.00 V

Description Hard surfaced (3/8” Tube) Plain (3/8” Tube) Chrome insert (3/8” Tube) Chrome insert (1/2” tube) Replacement Tip

$9.60 V

3/8” tube, for field cult. Part # FCI

$9.05 V

Thin Profile Chisel Plow Knife Part # CP70 CP70-P CP70-CI4 CP70-CI4-12 CI4

3/8” tube, for chisel plows Part # CPI

Price $41.00 V $23.75 V $40.00 V $41.00 V $11.50 V

The Lange C-240 Knife Available in 50° shank designs!!

1/2” tube, for chisel plows Part # CPI-12

$10.95 V

1/2” tube, for field cult. Part # FCI-12

$10.50 V

Liquid and NH3 Conversion Tubes The HT1 tube may be mounted either between the shovel and the shank, or behind the shank. It has a 3/8” tube or 1/2” tubes. 3/8”- for liquid or nitrogen Part # HT1

HT1

$7.95 V

Part # C-240-50 Chrome Tip

$8.75 V

$50.00 NET

TA-2

Part #CC-240 Chrome Carbide Tip

The TA-2 tubes mount behind the shank, and are used for applying NH3 with a sweep. 3/8” Tube.

$75.00 NET

nnSelf-locking recessed bolt holes reduce bolt head wear nnProvides superior sealing by forcing dirt back into the slot nnUniversal hose adapter will receive either 3/8” or 1/2” NH3 hose nnThe replaceable tip, in addition to having excellent wear and durability characteristics, can be changed for considerably less than the cost of a throw-away knife Replacement Tip Part # C-205 Chrome (5/16” hole, old-style)

$27.00 NET

Part # C-205-12 Chrome (1/2” hole, new-style)

$27.00 NET

3/8” Tubes Part # TA-2

$13.60 V

The HT3, HT4, & HT6 are mounted behind the shank. They have a 1/2” tube. They may also be used for liquid placement.

C-205 HT3

HT4

HT6

Part # CC-205 Chrome Carbide

$46.00 NET Hose Clip Part # L-CLIP

$1.90 NET

1-800-373-4084

1/2”- for single Cold-Flo Part # HT3

$7.95 V

1/2”- for double Cold-Flo Part # HT4

$11.25 V

1/2”- for NH3 or liquid Part # HT6

$9.25 V

141

Knives & Accessories

1/2”- for liquid or nitrogen Part # HT1-12

Shanks & Shank Clamps Fiberboard Insulators

Hose Clip The HT5 clip is designed to mount 1/2” hose behind the shank.

Place these fiberboard insulators between shanks and conversion tubes on chisel plows or cultivators. These insulators fit both the CPI & FCI conversion tubes. Part # ICP

Clip for 1/2” hose Part # HT5

$3.25 V HT5

$0.50 V

Shanks & Knife Plates

KSC-95

KSC-90, 97

KSC-92, 93, 98 KSC-1212

Knife Part # Replaces A B Plates Reqd. KSC-95 Blu Jet Generic 13 20 no KSC-92 Wilmar/Dempster 12 17.75 yes KSC-90 DMI 11.75 16 yes KSC-93 Universal 12 16 yes KSC-97 John Blue-long 13.5 18.5 yes KSC-98 John Blue-short 13.25 13.25 yes KSC-1290 DMI 13 24.5 yes KSC-1212 1” x 2” Knife Plate KSC-385 1-1/4” Knife Plate

KSC-1290

Knives & Accessories

KSC-385 Price $99.00 $116.00 $114.00 $116.00 $114.00 $121.00 $68.00 $30.00 $26.75

V V V V V V V V V

Shank Clamps 2

4 6

Single lollipop shank clamp and top plate for a 4” x 4” tool bar. Part # KSC-384

$34.00 V

7 1

142

Ref # 1 2 3 4 6 7a 7b —

Single lollipop shank clamp and 4” x 6” top plate and 3/4” bolt are for a 4” x 6” tool bar. Part # KSC-3846

$36.00 V

Part #

Description

Price

KSC-125SP KSC-384I KSC-384TP KSC-3846TP HN34 CS34612 CS34700 LWASH-34

Stabilizer Plate Single Lollipop For Shank Top Plate, 4” sq” Top Plate, 4” x 6” Nut For 3/4” Plow Bolt .75”x 6.5” bolt for KSC-384 .75”x 7” plow bolt only, Grade 5 Lock Washer For 3/4” Plow Bolt

$12.50 $17.00 $13.60 $15.50 $0.37 $3.75 $3.95 $0.19

V V V V V V V V

www.horvick.com

NH3 Meters & Valves Continental Meter Matic n Setting MeterMatic for application rates shown on dial:

Continental 9590 Hydraulic Shut-Off Valve n Designed to be mounted in front on any NH3 metering device. n Standard 1/4” ports easily integrates with any tractor’s hydraulic system. n Maintenance-free rotor actuated ball valve.

Lbs. Nitrogen X Swath feet X MPH X .1212 = Nitrogen applied in one hour EXAMPLE: 100 X 30 X 5 X .1212 = 1818 Lbs NH3/hr Part #

Inlet Outlet (in.) (in.) C-2503-RPR 1 MPT 1 FPT C-2503-HYD 1 MPT 1 FPT C-4103-RPR 1 MPT 1 FPT C-4103-HYD 1 MPT 1 FPT

Max.Flow at 100 PSI 2500 2500 4100 4100

Shut-Off Assembly Rope Hydraulic Rope Hydraulic

1” shut-off Part # R-9590

Price $690.72 $900.83 $730.05 $940.19

$291.77 V

V V V V

1-1/4” shut-off Part # R-9590-B

$291.77 V

Repair Kit Part # R-9590-RK .............. $48.68

Repair Kits Part # A-4125-RS B-7200RS

Description 4103, 2503 7200 series

Price $53.64 V $53.64 V

Continental 9500 Meter

Continental 9500 Meter Part # B-9500-114

$1,190.32 V

Repair Kit Part # B-9500-RS

$64.89 V

John Blue Nitrolator Parts

John Blue Nitropacer Parts Part # 104532 104533 104507 102926 106366 A-3784-A A-3242 A-3232-C A-3239 A-3227 A-3238-A A-3345 112016-01 A-3251

Description Nitropacer Repair Kit Manual Shut-Off Repair Kit Electric Shut-Off Repair Kit Manual Shut-Off Valve Electric Shut-Off Valve Rotary Slide Rule Strainer Cap Screen Cap Strainer Rod Strainer Screen Strainer Gasket Metering Valve Assembly Shut-Off Cap Gasket For Shutoff Cap

1-800-373-4084

NH3 Meters & Valves

The Continental 9500 provides a maximum flow of 6500 lbs “N” per hour at 100 lbs of tank pressure. The inlet is 1-1/4” FPT and the outlet 1-1/4” FPT. The hydraulic shut-off assembly has 1/4” connectors.

Price $77.49 V $99.91 V $114.15 V $701.15 V $863.08 V $109.00 V $34.03 V $31.80 V $15.49 V $13.17 V $2.05 V $561.83 V $36.85 V $9.27 V

Part # 110795 104534 104535 104508 103230 106375 A-3784-A A-3711 A-3717-C A-3738-A A-3731 A-3758-A A-2836 112017-01 A-3705

Description Gasket Kit, A-3901 Gasket Kit , A-3900 manual shut-off repair kit Electric Shut-Off Repair Kit Manual Shut-Off Valve Electric Shut-Off Valve Rotary Slide Rule Strainer Cap Screen Cap U-Cup Expander Strainer Screen Strainer Gasket Strainer Cap Wing Nut Shutoff Cap Gasket For Shut Off Cap

Price $81.61 V $77.33 V $31.70 V $92.68 V $321.43 V $898.95 V $109.00 V $20.74 V $11.47 V $3.95 V $10.70 V $0.70 V $0.77 V $33.66 V $1.75 V

143

NH3 Tank Valves Angle Valve

Vapor Relief Valves

Maximum flow efficiency, ideal for use on nurse tanks and field storage tanks. Valve bodies are made of rugged ductile iron and come with 1/4” NPT port for a bleeder valve. Precision ground stainless steel stem, teflon packing. Mfg. Continental * Continental * Squibb Squibb

Part # A-1250C A-2425C AL311P AL313P

Size (in.) 1 1-1/4 1 1-1/4

Price $148.58 V $279.78 V $162.00 V $344.00 V

* Models with a “C” after number have a bleeder valve installed

A-402VA Part # A-417-A A-402VA A-1301A

Safety relief valves are designed for installation in the vapor area of anhydrous ammonia containers for agricultural use. They open to relieve pressure when it exceeds the designated working pressure of the container.

Manufacturer Continental Continental Squibb

Size(in.) 1-1/4 3/4 3/4

Features a positive, manual shut-off stem and seat instead of the old automatic style back-flow check filler, which is a safety feature. The 1” female pipe thread liquid withdrawal outlet is equipped with a bypass stem assembly for the protection of hose or metering devices. Part # A-1205

CAUTION: This valve to be used on top fitted tanks ONLY.

$257.49 V Part # MPT Size (in.) A-215-L 1-1/4 w/ coupling A-1350C 1 A-2525C 1-1/4 AL310P 1 AL312P 1-1/4

Price $349.91 V $159.09 V $252.33 V $143.00 V $299.00 V

Filler Valve

Withdrawal Valve These are versatile valves in either a 1” or 1-1/4” female outlet and a 1/4” FPT outlet port for installation of an accessory. Continental Part # A-1206E

These high flow, manual shut-off valves for applicator and nurse tanks are designed for use as a filler, vapor, or liquid withdrawal valve. Rugged, ductile iron body. Equipped with an excess flow check assembly to provide maximum safety in case of an accidental hose break. Continental Part # A-1201C

$189.59 V

Squibb Part # A-525P

$197.00 V

4”

3”

PIPE SIZE 2”

1”

3/4”

1/4” 3/8” 1/2”

144

1-1/2”

$253.00 V

Pipe Size Scale A common error in sizing threaded fittings is using a ruler or tape measure. Pipe sizes must be measured by a pipe size scale.

A-1201C

Squibb Part # A-520R

$162.27 V

1/8”

Knives & Accessories

A-215

A-1206E

Price $207.25 V $51.27 V $60.00 V

Combination Valve

Globe Valves

Mfg. Continental Continental Continental Squibb Squibb

A-1301-A

www.horvick.com

NH3 Accessories Valve Repair Kits Continental

Part # A-2212-RK 22-5312 310-22

312-22 Squibb Taylor 316-22 320-22 344-22 A7505-50 A7507-50 A7509-50 Rego A7513-50 A8016B-50 A7515-50

Fill Coupler

Continental Part # B-521B

$30.13 V

Squibb Part # A-1151F

$37.00 V

Part # A-1156FS 2-1/4” Acme F x 1-1/4” MPT

$109.00 V

Bleed Valve Bleeder valves, with a knurled screw, are used to bleed off trapped liquid or vapor NH3 or LPG in hose, valves, couplings, and piping.

1/4-in MPT

Speed Couplers

Hydrostatic relief valves are designed to relieve liquid pressure in valves, hoses, or piping where in liquid maybe trapped. Pressure set at 375 PSI. Part # A-400

$29.00 V

Note: All safety relief and hydrostatic relief valves must be changed five years after date of manufacture.

1-800-373-4084

$22.94 V $22.58 V $42.00 $48.30 $83.00 $73.50 $21.00 $22.00 $29.00 $37.00 $19.00 $58.00

V V V V V V V V V V

$80.00 V

Part # A-1132F 1-1/4” MPT x 2-1/4” Acme

$158.00 V

Continental 1” MPT x 1-3/4” Acme Part # A-577B

$69.77 V

Part # A-577C 1-1/4” MPT x 1-3/4” Acme

$122.99 V

Parking Plug Parking Plugs listed here are for bolting or welding to the tank roll-over guard to provide a convenient means of securing the transfer hose during transit or storage. A 1/2” bolt and lock washer is included. Part # A-524WB

$14.61 V

Hydrostatic Valve

$21.54 V

Squibb Part # A-1131F 1” MPT x 1-3/4” Acme

Rugged, light-weight aluminum casting molded around a steel insert. Designed to reduce the undesirable flashing of liquid ammonia when making connections.

Screw Style Part # A-411-S

$15.31 V

Price

CAUTION- if used as a plug, be certain the coupling and the valve has been bled before removal. Not leak proof.

Acme Adapters Acme adapters provide fast, smooth engagement with mating connections. Fabricated from cadmiumplated steel for durability and to resist rust and corrosion. Part # A-524 A-524B A-524C A-2060S

MPT(in.) 3/4” 1” 1-1/4” 1-1/4”

Acme 1-3/4” 1-3/4” 1-3/4” 2-1/4”

Price $28.58 V $21.96 V $27.67 V $85.00 V

145

Knives & Accessories

Continental and Squib acme thread couplings create a tight fit to and from storage, field nurse tanks, and applicators without the need for hammers or wrenches. The acme nut shell is rugged, light-weight aluminum casting molded around a steel insert for strength and reliability.

For the Following Valves A-211, A-212, A-213, A-214, A-201, A-1202, A-1204, A-1250, A-1275, A-1285, A-1350, A-1375, A-1385, A-2201, A2202, A-2204, A-2250, A-2275, A-2285, A-2350, A-2375, A-2385 Stem And Swivel Poppet Assembly AL310, AL311, AL477, A1590, A1591, A1592, A15907, A15917, A15927, A1578 AL312, AL313, AL314, AL315 AL316, AL317 AL320, AL321, AL320PF, AL321PF AL345P A7505AP, 17505AP, A7016A, A8016A A7507AP, A7508P A7509BP, A7510BP A7513AP, A7513FP, A7514AP, A7514FP A8016B, A8016D, A8017B, A8017D, A8018B, A8018D

NH3 Accessories Pioneer Breakaway Coupler

Hose with Ends

Factory Assembled, Crimped-End Hose

AAH100-3 Hose Assembly

4510-7

Shown with 1” fpt threads. 4500-6M comes with acme thread

4510-6

Breakaway couplers shut off the flow of NH3 from nurse tanks to applicators when a hitch failure occurs, preventing hose rupture. Breakaway couplers require annual maintenance, and safety inspections before EACH USE. Couplers can corrode and may not operate properly if connected for a long time period.

Knives & Accessories

A complete breakaway coupler comes with a bracket and bleeder valve (bracket and female coupler cannot be purchased separately).

Part # Size (in.) Description Price 4500-6M 1 Complete coupler w/Acme end $390.00 V 4510-6C 1 Male tip only, 1” FNPT $70.00 V 4510-6MC 1 Male tip only, 1-3/4” Acme $95.00 V 4555-6 1 Female end with bracket $309.00 V 45-801-6 1 O-ring $1.62 V 4158001 1 Teflon backup ring $2.60 V 4503-7 1 Double swivel bracket $74.00 V A2084 1 Spacer for 1” Pioneer to $43.00 V Flo-max EZ bracket 45-802-6 1 Seal for 4510-6M Acme nipple $1.95 V 4500-600-6A 1 Snap ring $6.27 V 4500-7 1-1/4 Complete coupler w/o Acme end $454.00 V 4555-7 1-1/4 Female end with bracket $345.00 V 4510-7C 1-1/4 Male tip only, 1-1/4” FNPT $123.00 V 4503-7 1-1/4 Double swivel bracket $74.00 V A2085 1-1/4 Spacer for 1-1/4” Pioneer to $26.00 V Flo-max EZ bracket 45-801-6 1-1/4 O-ring (two required) $1.62 V

Custom Lengths Available

Part #

Description

Price

AAH100-3 AAH100-5 AAH100-8 AAH100-12 AAH100-15 AAH125-4 AAH125-5 AAH125-8 AAH125-10 AAH125-12 AAH125-13 AAH125-15 AAH125-16 AAH125-22 AAH125-25 AAH125-30 AAH125-33 AAH125-40

1” x 3’ assembly with MPT ends 1” x 5’ assembly with MPT ends 1” x 8’ assembly with MPT ends 1” x 12’ assembly with MPT ends 1” x 15’ assembly with MPT ends 1-1/4” x 4’ assembly with MPT ends 1-1/4” x 5’ assembly with MPT ends 1-1/4” x 8’ assembly with MPT ends 1-1/4” x 10’ assembly with MPT ends 1-1/4” x 12’ assembly with MPT ends 1-1/4” x 13’ assembly with MPT ends 1-1/4” x 15’ assembly with MPT ends 1-1/4” x 16’ assembly with MPT ends 1-1/4” x 22’ assembly with MPT ends 1-1/4” x 25’ assembly with MPT ends 1-1/4” x 30’ assembly with MPT ends 1-1/4” x 33’ assembly with MPT ends 1-1/4” x 40’ assembly with MPT ends

For 1 1/4” breakaway coupler Contains (2) 45-801-6 O-rings Part # 21584.........................$3.24

Part # A-402NDCC A-402NDC A-417-DC 22-63FC 22-63F P145 A-535C ST-1177

Mfg. Continental-w/ chain Continental-w/o chain Continental-w/o chain Continental-w/ chain Continental-w/o chain (Acme) Squibb-snap on Continental-w/ chain Squibb w/ plastic chain

Basic Kit

1” safety breakway Part #NHBK

1-1/4” safety breakaway Part #NHBK-114

$642.00 V

Size Price 3/4” $4.52 V 3/4” $1.87 V 1-1/4” $3.18 V 1-3/4” $4.35 V 1-3/4” $2.27 V 1-3/4” $5.15 V 2-1/4” $88.07 V 2-1/4” $13.13 V

This is an anhydrous ammonia conversion kit for field cultivators and chisel plows. The basic kit includes breakaway coupler, safety goggles, gloves, dust cap, and Led-Seal.

Shown with 1” breakaway coupler

$489.00 V

146

V V V V V V V V V V V V V V V V V V

Dust Caps

Repair Kits—Safety Break-away Coupler For 1” breakaway coupler Contains (1) O-ring (45-801-6), teflon packing, (41580 01) gasket for 4510-6 Acme nipple (45-802-6) Part # 20221..........................$6.15 V

$72.00 $95.00 $125.00 $167.00 $209.00 $153.00 $165.00 $210.00 $262.00 $279.00 $341.00 $338.00 $359.00 $519.00 $646.00 $769.00 $737.00 $875.00

1-1/4” Flomax kit Part # NHBK-114FLOMAX

$935.00 V

www.horvick.com

NH3 Accessories Flo-Max NH3 Coupling

Nylon Reinforced Hose

Provides maximum flow with virtually no pressure drop. Made by SquibbTaylor, the Flo-Max design features “swing-style” check valves that provide a wide open through bore in its operating position.

1-1/2” & 2”– Series 7262

n Ideal for cold weather operations where getting the most NH3 possible is required. n Mounts to existing swivel brackets. n New installations require a bracket. n 125 GPM @ 10 PSI differential

4503-7 FM150-KIT

Description 1-1/4” NH3 Coupling, less Bracket 1-1/2” NH3 Coupling, EZ Bracket

Brackets

4503-7 1-1/4” Bracket FM126-1500 EZ Bracket

Repair Kits

FM125-0024 O-RING KIT FOR FM125/126

Adapters A2084 A2085

Spacer for 1” Pioneer Spacer for 1-1/4” Pioneer

FM126-1500

Price $680.00 V $1,315.00 V $74.00 V $125.00 V $14.90 V

WARNING: for Anhydrous Ammonia USE ONLY! Do not use with male swivel couplings. Do not use in LPG, natural gas or refrigeration applications. Part # AAH200-xx AAH150-xx

Description 2” Nylon NH3 Hose 1-1/2” Nylon NH3 Hose

Price / Ft. $45.00 V $31.50 V

NOTE: Replace xx in part number with custom length.

High Flow NH3 Valves / Caps / Adaptors A-2550C

$43.00 V $26.00 V

High Flow NH3 Breakaway Coupler 1-1/2” tool bar coupler is designed for high flow cold weather application. n 40% larger than 1-1/4”. n Up to 50% flow increase — used in conjunction with 1-1/2” hoses, valves, and couplings. n Bleeder valves included. n Less investment than pumping systems. n Traditional design with proven locking collet system. Breakaway Coupler with bracket Part# A-HFC-112-G

$1,093.81 V

1-800-373-4084

A-535C

A-533-G Part # A-533-G A-535C A-217-L A-2450C A-2550C A-577G

A-2450C

Description New Acme 1-1/2” MPT to 2-1/4” acme New Acme Cap 2-1/4” acme cap with chain New Globe Valve 1-1/2” valve with 2-1/4” acme New Angle Valve with A-411 New Globe Valve 1-1/2” with A-411 1-1/2” Speed Coupler for 2-1/4” Acme

Price $77.91 V $88.07 V $464.04 $283.47 $291.51 $172.51

V V V V

147

Knives & Accessories

Part # FM126-KIT FM150-KIT

Designed for NH3 to 350 PSI working pressure with a 5:1 safety factor (1750 PSI min. burst). This hose provides the flexibility required for farm or field applications. n Degradation resistant nylon multiple braid reinforcement n Temperature range: -40°F to +180°F n Comes with crimped MPT ends — fittings are series 7661 or Parker Dayco hydraulic crimp couplings. n Meets or exceeds RMA/TFI/ANSI

FM126-KIT

A2085

Custom Lengths

NH3 Gaskets & Hoses Gaskets G15-7 Junior Dial Gasket

NH3 Hose, Clamps, Connectors

$1.65 V

G15-4 Senior dial Gasket

Reusable Clamp

$2.12 V

45-801-6 O-ring for 1” & 1-1/4” couplers

$1.62 V

4158001 Teflon Back-up O-Ring for 1” Couplers

$2.60 V

Part # Hose Pipe Price Size Size 12-CL 3/4” 3/4” $24.57 V 1612-CL 1” 3/4” $30.08 V 16-CL 1” 1” $30.08 V 20-CL 1-1/4” 1-1/4” $44.84 V 24-CL 1-1/2” 1-1/2” $49.72 V 32-CL 2” 2” $119.89 V

NOTE:

Replacement gaskets shown in actual size—you may use the gasket outlines shown here as patterns to be sure you order the proper size.

NH3 Handling Equipment

These reusable clamps are for coupling NH3 hose. They feature two-bolt construction with a stem of machined steel. The clamp is made of rugged, ductile iron. Both stem and clamp are cadmium-plated to protect the clamp from rust and corrosion.

45-802-6 for 4510-6M Acme nipple

A-532-2 Acme 2-1/4”

$1.95 V

$1.78 V

Black EPDM NH3 Hose This black neoprene hose is reinforced with a fabric or stainless steel braid. This is high pressure hose for conveying NH3 from delivery trucks to dispensing tanks and where high pressure lines are needed for transfer of NH3 to applicators. This hose handles NH3 at working pressuresup to 350 PSI, with a 5:1 safety factor (1750 PSI minimum burst).

Bulk Hose Part # Description AAH100 1” nylon braid, no ends, per ft. AAH125 1-1/4” nylon braid, no ends, per ft. AAH100-SS 1” ss braid, no ends, per ft. AAH125-SS 1-1/4” ss braid, no ends, per ft. AAH200-SS 2” stainless, no ends, per ft.

22-71F Acme 1-3/4”

$0.40 V

A-540-2 Acme 3-1/4”

$2.03 V

148

Price $11.00 V $19.75 V $23.00 V $32.50 V $68.00 V

EVA Hose

(not included in kits) nn Available in black or translucent

Part # EVA038 EVA038R EVA050 EVA050R

Description 3/8”, per foot” 3/8”, per 500’ roll” 1/2”, per foot” 1/2”, per 300’ roll”

PSI 75 75 75 75

Price $0.61 V $271.00 V $0.75 V $202.00 V

www.horvick.com

NH3 Gauges Stem-Mounted NH3 Pressure Gauges

2 1/2” face shown

These gauges use stainless steel components for solutions which would corrode brass. The gauges are esigned to withstand shock, vibration, and pulsation. The gauge face is available in 2-1/2” or 4”, and it has a 1/4” NPT male bottom connection.

Part # ASG60-212 ASG160-212 ASG400-212 ASG60-400 ASG160-400 ASG400-400

$16.86 V

Senior dial Part # SR-DIAL

2-1/2”

Junior Gauge 2-1/32” bolt circle Part # 2208

$9.35 V

Senior Gauge 2-1/2” bolt circle Part # 130015

Determine gauge head size-Junior or Senior. Specify the tank diameter. If you don’t know the tank diameter, check the name plate. Specify top, end, side or angle mounting. Size Size (gal) (in.) 1000 Jr. 41 1500 Jr. 46 1000 Sr. 41 1500 Sr. 46

Price $71.30 $145.93 $69.06 $69.06

V V V V

See Pages 66-72 For other Steel Fittings

Manifold Plugs 1/8” Plug for MVD manifold Part # A-6135 Orifice Price (in.) none $1.63 V 3/32 $2.12 V none $2.11 V 3/32 $2.25 V none $1.77 V 3/32 $2.25 V none $2.01 V 3/32 $2.14 V

NOTE: Cast Iron Fittings cannot be used in NH3 plant installations. Horvick’s carries a complete line of Heavy Duty Forged Fittings. Please call for information.

1-800-373-4084

1/4” Plug Part # A-1135

$0.60 V

U-Bolts Part #

Thread A B Size (in.)

Price

UB38-34 3/8 4 3 $1.95 UB38-44 3/8 5 4 $2.50 UB38-46 3/8 7 4 $4.95 UB38-77 3/8 8 7 $3.25 UB12-44 1/2 5 4 $2.50 UB58-44 5/8 5-1/2 4 $11.05 UB58-46 5/8 6-3/4 4 $15.00 UB34-46 3/4 7-1/2 4 $12.50

V V V V A V V V V

149

NH3 Handling Equipment

Part # A-6281-41 A-6281-46 A-6280-41 A-6280-46

$11.03 V

Manifold Barbs

Part # Pipe Hose Size (in.) Size (in.) A-6132 1/8 3/8 A-6132-2 1/8 3/8 A-6138 1/8 1/2 A-6138-2 1/8 1/2 A-1132 1/4 3/8 A-1132-2 1/4 3/8 A-1138 1/4 1/2 A-1138-2 1/4 1/2

H H H H H H

Other tank size gauges available

$17.56 V

Steel Pipe Fittings

$12.75 $12.75 $12.75 $25.00 $25.00 $25.00

For float gauges manufactured in 1983 and before

2-1/32”

Junior dial Part # JR-DIAL

0-60 2.5 0-160 2.5 0-400 2.5 0-60 4 0-160 4 0-400 4

Price

Float Gauges

Float Gauge Replacement Dials For float gauges manufactured in 1984 or later

Range Size (PSI) (in.)

NH3 Manifold Systems CDS-John Blue Impellicone Flow Divider

Barb Fittings Page 149

The CDS-John Blue Impellicone is a flow divider designed for Anhydrous Ammonia (NH3). It distributes NH3 to multiple rows across an applicator with the accuracy and flexibility you have come to expect from CDS-John Blue Products.

Impellicone’s name comes from the unique shaped needle, which spins and mixes the liquid and gas phases distributing them evenly to the number of outlets you need.

n ACCURACY: Evenly mixes the gas and liquid portions of NH3 and distributes accurately to each row. n FLEXIBILITY: Allows the end users to plug ports without any loss of accuracy.

n SIMPLICITY: A simple design allows for ease of service without removing the distribution lines, however it is recommended that proper handling techniques for n NH3 be used at all times. n VARIABILITY: Handles all typical application rates without changing any flow divider parts.

Part Number Description

Inlet Size

Outlet Size

Price

IP-1300 IP-1800 IPS-3 IPS-4

1” 1” 1” 1”

1/4” NPT 1/4” NPT 1” NPT 1” NPT

$492.54 $670.59 $416.62 $435.83

V V V V

Price $1,125.00 $1,505.00 $2,189.00 $2,719.00 $2,795.00 $3,495.00

V V V V V V

13 Outlet NH3 Flow Divider 18 Outlet NH3 Flow Divider 3-Port Impellicone Splitter 4-Port Impellicone Splitter

NPT NPT NPT NPT

Replacement/Repair Parts – See Page 171

NH3 Handling Equipment

Impellicone Kits Kits include a separator (if needed), manifolds, a gauge for the separator, 1” braided EVA hose to run between the manifold and separators, mounting stands, and a hardware kit. When ordering a kit,

please specify the number of manifold outlets, and the hose size for the shank distribution hose. (3/8” or 1/2”)

CDS-John Blue Exacto-Flow Flow Divider

150

Part # IMP-KIT-213 IMP-KIT-218 IMP-KIT-313 IMP-KIT-318 IMP-KIT-413 IMP-KIT-418

Description Covers up Covers up Covers up Covers up Covers up Covers up

to to to to to to

26 36 39 54 52 72

Runs Runs Runs Runs Runs Runs

Liquid fertilizer users demand accurate rates. The patented CDS-John Blue “Exacto-Flow” Flow Divider when used in conjunction with our liquid metering pump is guaranteed to deliver. After extensive research, we know that the FD-1210 and FD-2010 accurately divide liquid products across a wide range of application rates. We have proven in the

field that it is the most accurate distribution of any automatic flow divider system on the market today. The FD-1210 and FD-2010 provide unsurpassed accuracy with application rates as low as 5 GPA and as high as 80 GPA on 30 inch row spacing at 5 MPH. ¼” outlets, rated at 2.25 GPM per outlet

Part Number FD-1210 FD-2010

Inlet Size ¾” FPT Inlet 1” FPT Inlet

Description 12 outlet 20 outlet

Price $752.84 V $1,436.22 V

www.horvick.com

NH3 Manifold Systems The Continental MVD Manifold System We are very pleased to introduce to you our newly redesigned MVD manifold system.

TO DETERMINE MANIFOLD SIZE USE THE FORMULA BELOW Tool bar width in feet X Speed X lbs. N per acre X .1212 = Total lbs N per hour. Take the Total lbs N per hour and divide it by the number of outlets to get pounds of N per outlet. Rate Range

n No need for custom ordering n 2 sizes fits most applications n Inlet and outlet hose barbs installed n Comes with 16 outlets, just plug what you don’t need n Distribution accuracy as close as 4 percent from the mean average

n Orifice accelerator bushings allows for better distribution at wider rate ranges n Comes with 3/8” or 1/2” outlets n 3,4, and 5 way splitters available for bars with 33 outlets or more

Hose Barb Part # Price Size 20 to 150 lbs N per outlet 3/8” A-MVD-16A120 $303.68 V 20 to 150 lbs N per outlet 1/2” A-MVD-16B120 $303.68 V 150 and up lbs N per outlet 3/8” A-MVD-16A201 $303.68 V 150 and up lbs N per outlet 1/2” A-MVD-16B201 $303.68 V

NOTE: If you are adding on to the standard MVD system, you should use the standard one as a replacement. Call for details

NH3 Handling Equipment

MVD Manifold Kit Complete Kits

Kits include a separator (if needed), manifolds, a gauge for the separator, 1” braided EVA hose to run between the manifold and separators, mounting stands, and a hardware kit. When ordering a kit, please specify the number of manifold outlets, and the hose size for the shank distribution hose. (3/8” or 1/2”) EVA hose is not included! Breakaway is also not included!! Part # A-MVD-KIT2 A-MVD-KIT3 A-MVD-KIT4 A-MVD-KIT5 A-MVD-KIT6

Price $770.00 V $1,575.00 V $1,899.00 V $2,280.00 V $0.00 H

NOTE:

Hose lengths from splitter to manifold and from manifold to shank should be approximately the same length.

Vertical Dam Splitter

Repair Seals

Available in 3,4, or 5 outlets Specify # of outlets (XX) and barb size (S) Part # A-SVD-X

MVD SVD

Gauge adapter MVD-8121 $1.32 V

Top seal MVD-8142 $2.73 V

SVD-8115 $0.32 V

SVD-8149 $2.61 V

1-800-373-4084

Bottom Seal MVD-8144 $3.13 V SVD-8150 $3.66 V

A-SVD

$393.41 V

151

NH3 Decals Slow Moving Vehicle Sign

Miscellaneous Decals

Part # DEC-SMV

Part # DEC-82

$12.50 V

$6.65 V

SMV Kit (Slow Moving Vehicle Kit) Includes: metal SMV Sign and mounting hardware for Trinity or Chemi-Trol NH3 Tank Part # SMV-KIT

Part # DEC-NFG

Part # SMV-SPADE

Part # DEC-WYG

$3.95 V

$20.00 V

$1.69 V

$2.65 V

Part # DEC-VID

$2.39 V

Part # SMV-SOCKET

$2.85 V

NH3 Trailer Decal Kit Each may be purchased separately Decal Kit for NH3 Trailer Part # DEC-KIT

$35.00 V

NH3 Handling Equipment

Includes: (4) DEC-1005, (1) DEC-FSD, (2) DEC-AA, (2) DEC-IHN-3, (2) DEC-LIQ, (1) DEC-3PC, (2) DEC-CC

Part # DEC-CC

$3.60 V

Part # DEC-FSD

$3.95 V

Part # DEC-1005

$1.75 V

Part # DEC-LIQ

$1.69 V Part # DEC-3PC

$3.35 V

Part # DEC-INH-3

$2.05 V

DEC-AA

$2.99 V

152

DEC-AA6

$23.00 V

www.horvick.com

Hitches Heavy Duty Hitch Pins Hitch Pin

Designed for today’s heavy equipment. These pins are made of high tensile steel and are heat treated. Welded, red plastisol coated head and handle. The “original” red plastisol, heat treated, hitch pin. Includes clip.

Part # HH12 HH58 HH34-4 HH34 HH78 HH100 HH118 HH114

Dia. (in.) 1/2 5/8 3/4 3/4 7/8 1 1-1/8 1-1/4

Price Each $4.50 V $5.10 V $5.30 V $5.90 V $7.20 V $9.70 V $13.40 V $16.90 V

Schuck Cushion Hitches

Hitch Pin Clip Part # HHPC12 HHPC58 HHPC58 HHPC58 HHPC58 HHPC100 HHPC100 HHPC100

Price Each $0.29 V $0.39 V $0.39 V $0.39 V $0.39 V $0.49 V $0.49 V $0.49 V

Torpedo Hitch Designed with direct input from Farmers...

Part #

n Model 740: This hitch fits into a 2” receiver. (not shown) n Model 750: This hitch features a telescoping/ swivel tongue for easy hook up. It swivels 60º and extends 7” beyond the tow position.

Description

The Schuck Cushion Hitches contain injection molded urethane cushions to absorb end thrust shock and a high density polyethylene bearing to increase tongue load.

Tongue Cap. Pulling Cap. (lbs.) (lbs.) Price SCH-1000-750 Bumper With Cushion Hitch #750 1,000 40,000 $1,465.00 K SCH-320 Bolt-On Cushion Hitch 750 20,000 $265.00 K SCH-340 Cushion Hitch For 2” Receiver Tube 750 20,000 $265.00 K SCH-720 Bolt-On Cushion Hitch 1,000 40,000 $369.00 K SCH-740 Cushion Hitch For 2” Receiver Tube 1,000 40,000 $369.00 K SCH-750 Bolt-On Swivel Cushion Hitch 1,000 40,000 $629.00 K SCH-750-RT-R* Swivel Cushion Hitch For 2” Receiver Tube 1,000 40,000 $549.00 K SCH-CSH-8 Replacement Cushion (800) $16.00 K SCH-RK300 Cushions & Bearing Kits For 300 Series $73.00 K SCH-RK700 Cushions & Bearing Kits For 700 Series - $125.00 K SCH-RK800 Cushions & Bearing Kits For 800 Series - $161.00 K * limited supply

1-800-373-4084

Hydraulic Winch, 6000# (no mounting hardware) Part# ATH-HH

$2,195.00 NET

Heavy Duty Hydraulic Winch, 9000# (no mounting hardware) Part# ATH-HH-HD

$2,355.00 NET

The Anderson Torpedo Hitch makes hooking up equipment easy. Especially useful for Concord air seeders when applying anhydrous ammonia. Simply attach the torpedo hitch to your NH3 wagon and reel it in. n Speedy n Efficient n Labor saving—No more guessing hookups n Heavy duty hydraulic motor n 25 ft. of 5/16” heavy-duty aircraft cable. (call for pricing on 50 ft. cable.) n 6000lbs of vertical pull

153

Hitches & Accessories

n Model 320: The 320 bolts under a standard step bumper. n Model 340: This hitch fits into a 2” receiver. (not shown) n Model 720: This is a heavy duty version of the 320, it also bolts onto a step bumper.

Safety Equipment 3M™ 6000 Series Respirator

When properly fitted, helps provide respiratory protection from ammonia, methylamine and certain particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. The 3M™ Respirator 6000 series incorporate the 3M™ Bayonet Filter

Safety Equipment

Part # 3M6800 3M6900 3M6200 3M6300 3M6001 3M6004 3M60921

Description Full face mask, medium Full face mask, large ½ mask, medium ½ mask, large Organic vapor cartridge, Pair NH3 cartridge, pair Vapor cartridge pair

and vapors.

Eye Wash Bottle

Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use for sandblasting or in environments that are immediately dangerous to life or health (IDLH) Price $175.00 V $175.00 V $15.95 V $15.95 V $16.60 V $19.95 V $33.00 V

Eye-wash bottles hold 4 oz. and are small enough to carry in a shirt pocket, keeping fresh water handy at all times.

Fixing System, enabling a wide range of 3M™ Filters to simply click into place. Suitable for many situations, providing filtering protection against particulates and a wide variety of gases

Part # EYE WASH BOTTLE

$1.50 V

Goggles Safety goggles provide eye protection when working with chemicals and anhydrous ammonia. They are nonvented to prevent fumes or vapors from reaching the eyes while the goggles are in use. Part # GOGGLES

$3.75 V

Booties

Booties are available in polypropylene which provides superior chemical resistance. Part # BOOTIES $1.50 V (per pair)

Coveralls nn Micro-porous film over spunbonded polypropylene material nn25 per case

154

Part # Size Description Price/Pr Price/Case DC-T-L Zipper front, long sleeve, collar $5.29 V $146.25 V DC-T-XL Zipper front, long sleeve, collar $5.29 V $146.25 V DCH-T-L Zipper front, long sleeve, hooded $5.95 V $173.75 V DCH-T-XL Zipper front, long sleeve, hooded $5.95 V $173.75 V

www.horvick.com

Safety Equipment Vinyl Coated Aprons

Water Storage Tanks

These vinyl-coated aprons provide excellent protection from most chemicals. Aprons are available in standard duty, heavy duty, and heavy duty with sleeves. Part # APRON

These water containers are rugged, gray plastic for rinse water storage on anhydrous ammonia tanks. They come with heavy duty, molded-in hose barbs, mounting straps, tank lid and hose.

$2.95 V

Heavy-duty apron Part # APRON-HD

$7.95 V

Replacement Caps

Heavy-duty apron with Sleeves Part # APRON-S

Old Style Caps Part # PHC-O

$24.00 V

$4.95 V

New Style Caps Part # PHC-N

$4.95 V

Gloves

$49.00 NET

$59.00 NET

Rinse & Storage Combo Tanks

Price/Dz. $31.80 V $29.76 V $29.76 V — —

3M Reflective Tape

n 6.9 gallon n Storage area for gloves, goggles n Fits either top or side mount applications Part # CRM-WSK

$149.00 V

Safety Protection Kit Be Seen And Be Safe!

White Yellow Price 73-2 71-2 $1.40/ft. V NA 71-29 $1.10/strip V

1-800-373-4084

$125.00 V

Combination water/storage for NH3 tanks (not pictured)

* Box of 100

3M Diamond grade red/white, solid white, red or yellow reflective tape meets NHTSA regulations for agriculture and transport vehicles that require D.O.T. approval. Available in 1” or 2” wide. Rolls are 150’ long.

This tank provides storage for gloves, goggles, and 9-gallons of fresh water. It has an ABS cover with hinges for storage and a spigot valve. The tank is supplied with (3) 3/4” outlets. Part # TR9SF

Safety Equipment

Part # Description Price Ea. GLOVES Ammonia $2.95 V GLOVES-CH Nitrile – large $2.75 V GLOVES-CH11 Nitrile – XL $2.75 V GLOVES-LE* Latex gloves – box med $11.50 H GLOVES-LE-LG* Latex gloves – box lg $11.50 H GLOVES-NE-XXL* Blue Nitrile gloves $15.00 H

Red/White Red 2” 81-2 72-2 2”x 9” pre-cut NA 72-29 strips

Side Mount Tank Top Mount Tank Part # PHSWK Part # PHTWK

These safety kits are made from the same material as the water containers. Kits come complete with goggles, gloves, lid and all mounting hardware. Part # PHSK

$52.00 NET

155

Odds & Ends Wind Sock

Soil Probe These soil probes are designed to avoid soil sticking inside the tubes, getting plugged up by rocks, and problems caused by soil compaction. Soil probes have a 1” inside diameter. Part # Length (ft) Description HSPT-12 — Tip for 1/2” opening HSPT-58 — Tip for 5/8” opening HSPT-34 — Tip for 3/4” opening HSPQ-2 — 2’ Quick-Tach Tube Assy HSPQ-4 — 4’ Quick-Tach Tube Assy

Price ($ net) $29.00 NET $29.00 NET $29.00 NET $108.00 NET $239.00 NET

Check wind speed and direction with this economical wind sock. Comes with mount and staff. WIND SOCK

$69.00 NET

WIND SOCK-RS (sock only)

$24.00 NET

Wind Meters This wind meter is simple to use. It offers pocket-sized convenience and rugged construction for a lifetime of accurate readings. (2-60 MPH) Part # WIND METER

$34.50 V

Case of 6 Wind Meters Part # WIND METER-CS

$190.00 V

Rain Gauge This rain gauge accurately measures from 1/100” to 6” of moisture.

Electronic Wind Meters

There is nothing to rust of wear out on this rain gauge. It’s made of onepiece of heavy, weather-resistantant clear plastic with an aluminum post mount.

Rugged pocket wind meter. Very accurate and very affordable. Kestrel

Part # TRU-CHEK

Misc. Accessories

$9.95 V

Measuring Wheel

Part # WM-1000

Meter Man

This measuring wheel is ideal for rough terrain. It features a polystyrene wheel, telescoping handle and a push-button counter. Part # MM-1212 MM-6012 MM-7912 MM-7912C*

$99.00 K

Part # WM-2000

$129.00 K

WM1000 features n Current wind speed n Maximum wind speed n Average wind speed

Description 4” Dia. wheel 19” dia. wheel 25” dia. wheel Carrying case for 25” wheel

*Limited Supply

156

Price $30.50 V $86.00 V $92.00 V $27.50 V

WM2000 features n Current wind speed n Maximum wind speed n Average wind speed n Air, water and snow temp. n Wind chill

Part # WM-3000

$199.00 K

WM3000 features n Current wind speed n Maximum wind speed n Average wind speed n Air, water and snow temp. n Wind chill n Relative humidity n Heat stress n Dew point

www.horvick.com

Odds & Ends Field Marker Flags

FieldMarx

Custom imprinting available. (2-3 week lead time for custom flags) Add $20.00 one-time setup charge with first order. Minimum 10 bundle order. Part #33.00 V

Color

Dowel (ht. in.)

Flag Size (in.)

FLAGS

Red

5x8

FLAGS-W

White

5x8

BIO-FLAG-48

White

6x7

Density Scale

# per bundle

Material Weather-resistant plastic; wire pole; custom printing available (w/ order of 1000) Completely biodegradable. Wooden dowel

Price

100

$22.00 H

100

$22.00 H

$23.00 V

Seeder Meter Seed Application Rate Scale

Part # DS-3

$74.00 V Part # DS-2 (with bubble level)

$46.00 V

Highway Safety Light n 2 Functions: Flashing & Steady n Super Bright LED n Visible to 1.25 Mile n Extra Strong Magnets n Weather Resistant n Lasts 24+ Hrs. on 4 “AA” Batteries n Red, Amber or Clear/White Lens Part # HF18R-PHD (Red) Part # HF18A-PHD (Amber) Part # HF18R-MB (Tiltable Red)

$25.00 V

Determines POUNDS per ACRE of seed applied for all drill spacing for both conventional drills and air seeders. Due to different seed texture and size, the chart included with your seeder is only a starting point. Grain producers need to know the exact seeding rate to

save expensive seed. The seeder meter includes a chart with spacing and travel distance, a sample collection bag and instructions. This scale is extremely sensitive and has a range from 0 to 250 pounds.

Fire Extinguisher Keep at least one of these around! This 2.4 gallon capacity fire extinguisher can be recharged right in your own shop with water and air pressure. Sprays up to 50’ for 50-60 seconds on a charge. Perfect for combines and balers Part # PWS-25

$195.00 V

Mounting Bracket (sold separately) Part # VB-7

$57.00 V

1-800-373-4084

157

Misc. Accessories

Density scales are used to measure the weight of a liquid or granular fertilizer. Measuring density allows more accurate calibration and setting of application rates for spreaders and sprayers.

Useful Formulas Spraying Solutions–Other Than Water All the tabulations in the spray charts are based on spraying water, which weighs 8.34 lbs. per US gallon. Conversion factors must be used when spraying solutions which are heavier or lighter than water. To determine the proper size nozzle for the solution to be sprayed, first multiply the desire GPM or GPA of solution by the water rate conversion factor. Then use the new converted number to select the proper nozzle. Weight of Solution (in Lbs. per Gallon) 7.0 8.0 8.34 (water) 9.0 10.0 10.65 (28% nitrogen) 11.0 12.0 14.0

Specific Conversion Gravity Factor .84 .92 .96 .98 1.00 1.00 1.08 1.04 1.20 1.10 1.28 1.13 1.32 1.15 1.44 1.20 1.68 1.30

Common Formulas & Conversions Circumference of a Circle: Diameter x 3.1416

Area of a Circle: radius squared x 3.1416

Area of Rectangle, Square, or Parallelogram: length x width

Area of Triangle: base x height (at right angle to base) ÷2

Volume of Cube or Rectangle: length x width x height

Volume of Cylinder: radius squared x 3.1416 x length of cylinder

Volume of Sphere:

Tank Volume Calculations

radius cubed x 4.1888

nnRound Tank Capacity: Diameter in inches squared x length (or height) in inches x .0034

Volume of Cone:

nnRectangular Tank Capacity: Length x Width x Height (in inches) divided by 231

Acres:

nnGallons per foot in a Round Tank: Diameter (ft) squared x 5.875

Height x 3.14 x r2/3

length x Width ÷ 43560

Area and Distance: One Acre

Misc. Calculations & Conversions

One Hectare

= 2.471 Acres

Calculating Agitation Requirements Liquid- Tank Volume (Gallons) x .05=Total agitation in GPM

One Gallon Per Acre

= 9.35 Liters per Hectare

One Mile

= 5,280 ft = 1,610 Meters = 1.61 Kilometers

nnWettable Powders & FlowablesTank Volume (Gallons) x .125=Total agitation in GPM

Misc. Info

= 43,560 sq. ft. = 405 Hectare

nnAnhydrous Ammonia (NH3) nnPounds per Gallon of NH3 = 5.15 nnPounds per Gallon of “N” = 4.22 GPM (per nozzle) = GPA x MPH x W 5940 GPA = 5940 x GPM (per nozzle) MPH x W Speed = Distance (ft) x 60 Time (seconds) x 88

Volume: One US Gallon

= 128 fluid ounces = 8 pints = 4 quarts = 3.79 Liter = .83 Imperial Gallon = .1337 Cubic Foot

One Cubic Foot

= 7.48 Gallons

GPM = Gallon Per Minute GPA = Gallons Per Acre MPH = Miles Per Hour W = Width (Nozzle spacing in inches)

158

www.horvick.com

Useful Information Single Angle and Coverage

Spray Coverage Information

Nozzle Spacing

Operation pressure can significantly effect spray distribution. Lowering pressure decreases spray angle and significantly reduces spray coverage Tabulations for spray tips are based on spraying water. Generally, liquids more viscous than water form relatively smaller spray angles. Liquids with surface tensions lower than water will produce wider spray angles.

Flow Rate

Spray Tip Care Crop chemical performance depends on the proper application of the the chemical. Nozzles play a very important role in the accurate chemical application. The spray orifice is critical in the control of the volume of spray passing through each nozzle, the droplet size and the spray distribution. Dealers can help in selecting the proper orifice, but maintenance of those tips rests solely in the hands of the user.

Careful Cleaning Flat spray tips have finely machined, thin edges around the orifice to control the spray. Even the slightest damage can cause both an increased flow rate and poor spray distribution. Be sure to use adequate strainers in your spray system to minimize clogging. If a tip does clog, use only a soft bristled brush or a toothpick to clean it. Never use a metal object. Be extremely careful with soft materials such as plastic. Even a toothpick can distort these tips.

See Page 158 for useful formul and conversion as s

Worn Spray Tips

Replacement Parts for Pumps

Spray tips may be the most neglected component in today’s farming, yet their good working condition is critical to the proper application of valuable agricultural chemicals.

For example, a 10 percent over-application of chemical on a twice-sprayed 1000 acre farm could represent a loss of $2,000 to $10,000, or $10 to $50 an acre. Spray tips machined from harder materials will cost more initially, but stainless steel and hardened steel, while costing more initially, significantly outlast plastic or brass tips.

Suggested Minimum Spray Heights

The nozzle height suggestions in the table below are based on the minimum overlap required to obtain uniform distribution.

Nozzle Type TeeJetT Standard, TJ 65° TeeJet, XR, TX, DG, TJ 80° TeeJet, XR, DG, TT, TJ, AI 110° FullJetT 120° FloodJetT TK, TF 120°

Nozzle height at following spacing 20” 30” 40” 22-24” 33-35” NR* 17-19” 26-28” NR* 16-18” 20-22” NR* 10-18”** 14-18”** 14-18”** 14-16”*** 15-17”*** 18-20”***

* Not recommended. ** Nozzle height based on 30° to 45° angle of orientation (see page 60 of catalog). *** Wide angle spray tip height is influenced by nozzle orientation. The critical factor is to achieve a double spray pattern overlap for TK FloodJetT nozzles.

1-800-373-4084

Spacing

Spray Height* *Adjust spray height in the field to overlap approximately 30% of each edge of pattern.

159

Misc. Info

Nozzle flow rate varies with spraying pressure. To double the flow through a nozzle, the pressure must be increased four times. Higher pressure not only increases the flow rate of a nozzle, but also decreases droplet size and increases orifice wear.

Replacement Parts for Pumps Replacement/Repair Parts Banjo 200 and 300 Series Cast Iron Centrifugal Pumps

Misc. Info Misc. Info

2” Cast Iron Parts

3” Cast Iron Parts

Description Qty Price Ref. Part# Description Qty Price Ref. Part# NPT Outlet Flange 1 $47.05 H 1 17000 2” Threaded Outlet Flange 1 $23.95 H 1 18008 1 $46.44 H 1 M17000 2” Manifold Outlet Flange 1 $25.03 H 1 M18008 3” Manifold Outlet Flange NPT Inlet Flange 1 $50.22 H 2 17002 2” Threaded Inlet Flange 1 $27.07 H 2 18012 1 $46.44 H 2 M17002 2” Manifold Inlet Flange 1 $25.03 H 2 M18012 3” Manifold Outlet Flange Adapter Gas to Bearing Pedestal 1 $151.71H 3 17004 2” C-Flange Adapter 1 $95.57 H 3 18026 C-Flange Adapter 1 $228.66 H 4 17006 3/4” Sleeve Drive 1 $90.38 H 3 18048 Hydraulic Motor Adapter 1 $304.39 H 5 17008* 5” Impeller 1 $69.51 H 3 18049 Plug 1 $2.95 H 5 17008-4.6 4.6” Trimmed Impeller 1 $69.51 H 4 13777 1” Impeller & Drive Shaft (Gas) 1 $271.94 H 5 17008-4.1 4.1” Trimmed Impeller 1 $69.51 H 5 18023 6 17010 1/2” Hex Nut 1 $1.17 H 5 18023-1.125 1-1⁄8” Impeller & Drive Shft (Elect) 1 $251.45 H 1 $2.24 H 7 17011 Wear Plate 1 $37.06 H 6 12777 Plug 5⁄8” SS Jam Nut 1 $3.16 H 8 17013 EPDM Gasket 1 $6.10 H 7 18034 Wear Plate 1 $60.26 H 9 17016 Check Valve Assembly 1 $17.77 H 8 18004 EPDM Outlet Gasket 1 $9.45 H 10 17018 Gasket Adapter 1 $6.56 H 9 18009 Gasket Check Valve Assembly 1 $46.20 H 11 15022 Handle 1 $11.59 H 10 18013 Adapter Gasket 1 $7.34 H 12 17023 5⁄8” Clamp for ¾” Shaft (Old Style) 1 $42.49 H 11 18021 12 17123 5⁄8” Clamp for ¾” Shaft (Keyed) 1 $42.49 H 12 18010SS 3⁄8”-16x1-1⁄8” SS Cap Screw HXHD 8 $1.86 H Handle 1 $18.16 H 12 17024 7⁄8” Clamp for Shaft Assembly 1 $42.49 H 13 18033 Clamp Assembly (Old Style) 1 $49.45 H 13 17026 Pump Housing 1 $235.77 H 14 18029 Clamp Assembly (New Style) 1 $49.45 H 14 V-10118 5⁄16” Lock Washer 18 $0.42 H 14 18129 Pump Housing 1 $614.94 H 15 V-10119 5⁄16” - 18 SS Hex Nut 6 $0.56 H 15 18001 3⁄8” -24 x 2¼” Bolt 2 $4.39 H N/S 12883R Bearing Pedestal w/ ¾” Shaft Only 1 $92.63 H 16 18030 Wear Plate Flat Head Screw 2 $2.42 H N/S 12883B Bearings 2 $51.57 H 17 18106 8 $0.42 H 16 12882A Complete Pedestal Assembly 1 $213.64 H 18 V-20018 3⁄8” Lock Washer 3⁄8” x 24 SS Hex Nut 2 $0.76 H 17 17040 5⁄16” -24 x 1.00” Cap Screw 4 $3.71 H 19 18032 1” Shaft 1 $61.18 H 18 17028 EPDM Seal Assembly 1 $67.98 H 20 18504 Bearing Pedestal 1 $440.36 H 18 RS245V FKM (viton type) Seal Assembly 1 $53.00 H 21 18500 Bearing SKF 66306-2RS1/C3 2 $134.40 H 18 17035SD Severe Duty Seal 1 $357.16 H N/S 18502 Bolt 4 $3.08 H 19 17042 Stud 6 $1.94 H 22 17704 FKM (viton type) Seal Assembly 1 $2.24 H 20 17019 5⁄16”-18 x ¾” Cap Screw 8 $1.17 H 23 12777 6 $1.03 H 21 17009B 5⁄8” Impeller Nut 1 $7.88 H 24 V-20019 3⁄8” 16 SS Hex Nut 6 $0.42 H 22 17130 C Sink Flat Head Screw 2 $2.42 H 25 V-20018 3⁄8” SS Lock Washer 3⁄8” -16 x 3⁄ 8” -24 x 1½” SS Stud 6 $17.49 H 23 12777 Plug 1 $2.24 H 26 18218 O-Ring 1 $1.86 H 24 UV-15163 O-Ring 1 $0.44 H 27 13778 1 $0.44 H N/S 17100 Repair Kit (Items 4, 5*, 7,10,18*) 1 $234.08 H 28 UV-15163 O-Ring N/S 18100 Repair Kit (Items 5, 8, 11, 15, 19, 26) 1 $358.45 H 12 18 1

10 2 18 12

2” Cast Iron

3” Cast Iron

20 11

13 7

22 23

5 28

PUMPS

21 19 18

160

26 24 25

www.horvick.com

Replacement Parts for Pumps Replacement/Repair Parts 222 Series Cast Iron Pumps

Hydraulic drives available

Misc. Info

Item Part No 1 12882A 1 12600B 2 17010 3 15022 4 12765A 5 13778 6 13777 7 V-10118 8 15772 9 12716 10 12715A 11 12774VA 12 12719A 13 12705 14 15702 15 15703 16 12902A

Description Bearing Pedestal Assembly Hydraulic Pedestal Assembly ½” Jam Nut Handle 5⁄16”-24 x 1.12 Impeller Bolt O-Ring Prime/Drain Plug 5⁄16” Lock Washer 5 Vane Impeller Pump Slinger 5⁄16” - 24 x 1.75 HHCS Viton Impeller Bolt Gasket Body O-Ring Check Valve Volute Rear Bracket 3⁄16” sq x 5⁄8” Key

1-800-373-4084

Qty Price 1 $213.64 H 1 $1,397.56 H 1 $1.17 H 1 $11.59 H 1 $16.59 H 2 $1.86 H 2 $2.95 H 9 $0.42 H 1 $64.89 H 1 $5.15 H 13 $3.69 H 1 $1.39 H 1 $13.26 H 1 $15.16 H 1 $99.66 H 1 $116.66 H 1 $1.55 H

Item Part No 17 12901 18 12710 19 12717 20 RS601VSS 20 12713SD 21 15712 22 17013 23 17000 N/S 15751 N/S 17033 N/S 17034 N/S V-10119 N/S V-10118 N/S 15000 N/S 15000V N/S 15999V

Description Washer S.S. 5/16” O-Ring O-Ring Seal Assembly Severe Duty Seal Body Flange Gasket Threaded Flange Bracket Shim Z-Rails 5⁄16” - 18 x 1¾” Zinc Plated 5⁄16” -18 Hex Nut 5⁄16” Lock Washer Repair Kit (Includes items 2,5,11,12,13,19,20&shim) FKM (viton type) Repair Kit FKM (viton type) Seal Kit

Qty Price 4 $0.44 H 1 $3.24 H 4 $0.66 H 1 $39.00 H 1 $359.43 H 2 $200.87 H 2 $6.10 H 1 $23.95 H 1 $3.08 H 1pr $27.83 H 4 $0.76 H 4 $0.56 H 4 $0.42 H 1 1 1

$137.52 H $247.22 H $109.67 H

161

Replacement Parts for Pumps

Misc. Info Misc. Info

Replacement/Repair Parts Banjo 333 & 444 Series Cast Iron Centrifugal Pumps

Item Part # Description Qty Price N/S 16099 Impeller Removal Bolt 1 $3.83 H 1 18500 Bearing Pedestal (333PBI) 1 $440.36 H 2 16704 Rear Bracket 1 $480.87 H 3 16713 Mechanical Seal 1 $506.79 H 4 16710 O-Ring 1 $2.17 H 5 17704 3⁄ 8"-16 x 1.25"SS Cap Screw (333PBI) 4 $3.08 H 6 V-20018 3⁄ 8" SS Lock Washer 17 $0.42 H 7 16773 3" Impeller (333PBI) 1 $75.13 H 7 16774 3" Impeller (333PIH13) 1 $181.23 H 8 16901 ¼" SQ. ¾" Key Stock 1 $3.08 H 9 16765 Impeller Bolt (333PBI) 1 $23.37 H 10 16019 Gasket Set 1 $14.84 H 11 16702 Volute 1 $176.14 H 12 V-20011SS 3⁄ 8"–16 x 1.75" SS Bolt 9 $1.03 H 13 16733 Body 1 $729.05 H 14 18511 Adapter Plate (333PBI) 1 $106.45 H 15 18512 3⁄ 8"–16 x 0.875" SS HHCS (333PBI) 4 $1.56 H N/S 16751 Bracket Shim Set 1 $3.08 H N/S 16752 Impeller Shim 1 $2.64 H N/S 18033 Handle 1 $18.16H N/S 18034 5⁄ 8" SS Jam Nut 1 $3.16 H 16 16001 Outlet Flange 1 $50.31 H 17 16003 Inlet Flange 1 $60.55 H 18 16706 Outlet Gasket 1 $104.83 H 19 16011 Inlet Gasket w/ Check 1 $26.34 H 20 18002 1" NPT Plug 1 $6.95 H 21 18027 3⁄ 8" - 16 x 1.50" HHCS (333PIH13) 8 $1.86 H 22 V-20018 3⁄ 8" SS Lock Washer 8 $0.42 H

162

Item Part # Description Qty Price N/S 16099 Impeller Removal Bolt 1 $3.83 H 2 16704A Rear Bracket w/C-Face Adapter 1 $429.00 H 3&4 15025 Mechanical Seal 1 $195.00 H 6 V-20018 3⁄ 8" SS Lock Washer 8 $0.42 H 7 16773A 3" Impeller - 5 Vane 1 $72.50 H 8 17901 ¼" SQ. ¾" Key Stock 1 $2.75 H 9 16765 7⁄16-20 1¼" HFS 1 $23.37 H 10 16019 Gasket Set 1 $14.84 H 11 16702 Volute 1 $176.14 H 12 V-20011SS 3⁄ 8" - 16 x 1.75" SS Bolt 9 $1.03 H 13 16733 Body 1 $729.05 H N/S 16751 Bracket Shim Set 1 $3.08 H N/S 16752 Impeller Shim 1 $2.64 H N/S 18033 Handle 1 $18.16 H N/S 18034 5⁄8" SS Jam Nut 1 $3.16 H 16 16001 Outlet Flange 1 $50.31 H 17 16003 Inlet Flange 1 $60.55 H 18 16706 Outlet Gasket 1 $104.83 H 19 16011 Inlet Gasket w/ Check 1 $26.34 H 20 13777 ¾" Drain Plug 2 $2.95 H 21 18027 3⁄8" - 16 x 1.50" HHCS 8 $1.86 H 22 V-20018 3⁄8" SS Lock Washer 4 $0.42 H

www.horvick.com

Replacement Parts for Pumps Replacement/Repair Parts Banjo 2” Poly Centrifugal Pump 3 h.p. -100 GPM, 5-5.5H -160 GPM, and 6.5-8 h.p. -320 GPM

2” Banjo V-Shaped Pump Parts

Old Style....Banjo/Pacer Pump Parts

Ref. # Description 2 body nuts (10 required) 3 lockwasher (10 required) 4 rear bracket 5&6 EPDM seal assembly; 3/4” 5&6 viton seal assembly; 3/4” 7 O-ring (4 required) 8 bracket screw (4 required) 9 O-ring segment 10 body O-ring 11 impeller 12 impeller stud 13 O-ring, viton 14 hex nut 15 volute 16 volute screw (2 required) 17 check valve 18 1-1/2” body 18 2” body 19 body screw (10 required) 20 prime plug 21 O-ring 25s upper volute screw 26 1/4” S.S. washer (1 required) 27 impeller key 28 slinger

Ref.# Description

Misc. Info

“V” Shaped for Quicker Priming!

Part # Price V-07019 $0.42 H V-07018 $0.42 H 12703A $87.65 H RS601ESS $21.00 H RS601VSS $39.00 H 12717 $0.66 H 12715 $3.69 H 12754 $5.15 H 12719A $13.26 H 12772 $41.99 H 12765A $16.59 H 12774VA $1.39 H 12775A $13.26 H 12702A $64.53 H 12725 $3.30 H 12705 $15.16 H 12711A $141.45 H 12712A $141.45 H 12720 $3.30 H 12777 $2.24 H UV-15163 $0.44 H 12900 $1.47 H 12901 $0.44 H 12902A $1.55 H 12716 $5.15 H

1-800-373-4084

2 3 4 5&6 5&6 7 8 9 10 11a 11b 11c 11d 12 13 14 15 16 17 18 18 19 20 21 22 25 26 27 28

Banjo #

Price Pacer #

Price

body nuts (10 required) V-07019 $0.42 H 721.1 $1.00 C lockwasher (10 required) V-07018 $0.42 H ------ -----rear bracket discontined 703.3 $64.00 C EPDM seal assembly; 3/4” RS601ESS $21.00 H RS601ESS $21.00 H viton seal assembly; 3/4” RS601VSS $39.00 H RS601VSS $39.00 H O-ring (4 required) 12717 $0.66 H 717.72 $1.00 C bracket screw (4 required) 12715 $3.69 H 715.10 $4.00 C O-ring segment 12754 $5.15 H 12754 $5.15 H body O-ring 12719A $13.26 H 719.72 $13.00 C impeller(Pacer only- 3 vane) 704.3 $26.00 C impeller(Pacer only- 5 vane) 706.3 $26.00 C impeller(Pacer only–4 vane)-3 HP 974.3 $26.00 C impeller(Pacer only–4 vane)-5 HP 975.3 $26.00 C impeller stud 12765 $16.59 H 716.1 $4.00 C O-ring, viton 12774V $1.39 H ------ -----acorn nut 12775 $9.53 H ------ -----volute ------ ------ 702.3 $52.00 C volute screw (2 required) 12725 $3.30 H 725.10 $1.00 C check valve 12705 $15.16 H 705.72 $24.00 C 1-1/2” body 12711A $141.45 H ------ -----2” body 12712A $141.45 H 1002.30B $88.00 C body screw (10 required) 12720 $3.30 H 720.00 $1.00 C prime plug 12777 $2.24 H 722.30B $4.00 C O-ring 12722 $0.90 H 765.72 $1.00 C drain plug 12723 $1.93 H 723.3 $3.00 C upper volute screw 12900 $1.47 H 771.1 $3.00 C 1/4” S.S. washer (4 required) 12901 $0.44 H ------ -----impeller key ------ ------ 718.30 $2.00 C O-ring (3 required) 12722 $0.90 H ------ ------

163

Replacement Parts for Pumps

Misc. Info Misc. Info

Replacement/Repair Parts Banjo 3” Poly Centrifugal Pump

Item Part No Description Qty 1 V-07019 SS Body Nuts 10 2 V-07018 SS Lock Washers 10 3 12703A Poly Pump Rear Bracket 1 4 RS601ESS Seal Assembly 1 5 12717 Screw Heads O-Ring 4 5A 12715A SS Bracket Screws 4 6 12754 O-Ring Segment 1 7 12719A Body O-Ring 1 8 13771 4 Vane Impeller 1 9 12765A SS Impeller Bolt 5⁄16 x 24 x1.12 (300PH-6) 1 9 13765 SS Impeller Bolt (300P11PRO) 1 10 12774VA Impeller Bolt Gasket 1 11 12775A Impeller Hex Nut 1 12 13702 Poly Pump Volute 1 13 12725 SS Volute Screws 2 14 12705 Poly Pump Check Valve 1

Price $0.42 H $0.42 H $87.65 H $21.00 H $0.66 H $3.69 H $5.15 H $13.26 H $55.98 H $16.59 $16.59 $1.39 $13.26 $70.72 $3.30 $15.16

H H H H H H H

Item Part No 15 13712 16 12720 17 13777 18 13778 19 13777 20 13778 21 12900 22 12901 23 12902A 24 12716 25 12710 N/S 12882A N/S 13000 N/S 13999

Description Qty Price Body Assembly 1 $184.18 H SS Body Screws 2 $3.30 H Prime/Drain Plug 2 $2.95 H Prime/Drain Plug O-Ring 1 $1.86 H Prime/Drain Plug 2 $2.95 H Prime/Drain Plug O-Ring 1 $1.86 H SS Upper Volute Screw 4 $1.47 H SS Rear Bracket Washer 1 $0.44 H Impeller Key 1 $1.55 H Poly Pump Slinger 1 $5.15 H O-Ring for Seal Assembly 1 $3.24 H Bearing Pedestal 1 $213.64 H 4 Vane Impeller Repair Kit (Items 5, 6, 8, 9, 12, 16, 24, 25) 1 $141.45 H Pump Seal/O-Ring Kit (Items 5, 6, 8, 9, 12, 20,24, 25) 1 $70.72 H

Replacement/Repair Parts for 9202C Pump Ref Part # 1 2406-0009

Description Price Ref Part # drain plug (4 rq’d) $0.85 H 8 1410-0056

2 0150-9000C pump casing, 1-1/2”x1-1/4” 2 0150-9200C pump casing, 1-1/4”x1” 3 2253-0002 impeller nut 4 4 5 6 7

164

0401-9100P 0402-9100P 1720-0083 RS200V 1830-0040

Price $1.05 H

mounting flange bolt (4 rq’d)

$115.00 H

$9.05 H

$199.00 H

$221.00 H

11 2210-0020

$4.85 H

12 2000-0010

ball bearing (2 rq’d)

13 14 15 16

key $1.55 H pump shaft $141.00 H key $1.40 H bearing retainer $1.00 H

impeller-nyglas impeller-polypro O-ring viton seal seal retainer

$41.75 H $46.00 H $2.95 H $29.00 H $1.50 H

0750-9300C

Description slinger ring

1610-0015 0505-9200 1610-0004 1820-0013

$0.80 H

www.horvick.com

Replacement Parts for Pumps Replacement/Repair Parts ShurFlo 2088 Series

Misc. Info

Items not pictured

2088-343-135

94-238-03 11-111-00 94-236-11 94-231-05 94-232-05

L. housing/ drive kit (2088) 12v motor (2088) Replacement pump head (2088) Upper housing switch kit (2088) Valve kit, polyethylene & viton

$35.75 $0.00 $151.00 $55.75 $49.75

H H H H H

(1) Complete Pumphead

(2) Switch

(3) Check Valve

(4) Upper Housing

(5) Valve Assembly

(6) Diaphragm Assembly

2088-343-135 $134.00 V

94-236-11 $151.00 H

94-230-36 $25.00 H

94-237-05 $23.50 H

94-231-30 $14.00 H

94-232-05 $49.75 H

94-238-03 $35.75 H

2088-313-145 $217.00 V

94-236-15 $165.00 H

94-230-55 $31.50 H

94-237-05 $23.50 H

94-231-30 $14.00 H

94-232-05 $49.75 H

94-238-03 $35.75 H

2088-514-144 $183.00 V

94-236-11 $151.00 H

94-230-36 $25.00 H

94-237-05 $23.50 H

94-231-30 $14.00 H

94-232-05 $49.75 H

94-238-03 $35.75 H

2088-394-154 $194.00 V 2088-594-500 $173.00 V

94-236-11 $151.00 H

94-230-36 $25.00 H

94-237-05 $23.50 H

N/A

94-231-30 $14.00 H 21-399-00 $14.25 H

94-232-05 $49.75 H 94-232-05 $49.75 H

94-238-03 $35.75 H 94-238-03 $35.75 H

Pump model

Replacement/Repair Parts ShurFlo 8000 Series

Ref.# Part # 1 94-379-00 2 94-391-09 2 94-390-05 3 94-395-06 3 94-395-05 4 94-385-03 - 94-375-05

1-800-373-4084

Description Upper housing assembly Viton valve kit w/45 PSI bypass (250) Viton valve kit (236, 290) Diaphragm kit, santoprene Diaphragm kit, viton Lower housing drive assembly Switch assembly, 60 PSI (236)

Price $19.50 H $49.00 H $42.75 $19.25 $58.50 $26.50 $28.00

165

H H H H H

Replacement Parts for Pumps

Misc. Info Misc. Info

Replacement/Repair Parts Hypro Series 9303 Parts

Ref # Part # Description 1 2406-0007 drain/vent plug (4 required) 2 0150-9000C pump casing, volute 3 2253-0002 impeller nut 4 0402-9100P impeller, polypropylene 5 RS200V mechanical seal, viton, 9303 models 6 1720-0083 O-ring 8 0750-9300C mounting flange 11 1410-0056 slinger ring 12 1820-0013 retaining ring 13 1810-0014 snap ring 14 2000-0010 ball bearing 15 1410-0073 spacer 16 3430-0748 shaft seal 17 1410-0074 seal spacer 18 2029-0014 thrust bearing assbly (bearing, 2 races) 19 1810-0026 snap ring 20 0509-2500 shaft, HM2, HM4 0511-2501 shaft, HM1 0510-2500 shaft, HM3 25 1720-0110 O-ring 26 0700-2500C1 gerotor housing, HM1 1/2” thick 0701-2500C1 gerotor housing, HM2 1/4” thick 0702-2500C1 gerotor housing, HM3 1” thick 0703-2500C1 gerotor housing, HM4 5/16” thick

166

Price $0.85 H $199.00 H $4.85 H $46.00 H $29.00 H $2.95 $115.00 $1.05 $1.00 $0.90 $9.05 $0.00 $76.50 $1.05 $25.25

H H H H H H H H H H

$0.91 H $177.00 H $187.00 H $280.00 H $1.00 H $101.00 H $151.00 H $158.00 H $96.50 H

0704-2500C1 gerotor housing, HM5 5/8” thick $125.00 H 29 3900-0022 gerotor, HM1 $159.00 H 3900-0023 gerotor, HM2 $146.00 H 3900-0024 gerotor, HM3 $204.00 H 3900-0025 gerotor, HM4 $157.00 H 3900-0048 gerotor, HM5 $144.00 H 30 0251-2500C4 motor end plate w/bearing $109.00 H 31 3220-0029 bypass adjusting screw $7.50 H 32 1700-0047 gasket $3.55 H 33 2270-0027 washer $1.55 H 34 2250-0038 lock nut $0.85 H 35 2270-0039 washer (4 required) $0.85 H 42 3360-0021 pressure port adapter $11.00 H 43 1720-0105 orifice O-ring,HM2, HM4 only $0.85 H 44 3373-0020 metering orifice, HM2, HM4 only $2.25 H

Cast Motors & Repair Kits Part # Description Price 2500-0081C Motor only (9303C & 9304C-HM1C) $857.00 H 2500-0082C Motor only (9303C-HM2C) $857.00 H 2500-0083C Motor only (9303C & 9304C-HM3C) $1,004.00 H 2500-0084C Motor only (9303-HM4C) $857.00 H 2500-0085C Motor only(9304-HM5C) $857.00 H 3430-0748 Hypro hydraulic motor repair kit $76.50 H

www.horvick.com

Replacement Parts for Pumps Replacement/Repair Parts Hypro Series 9306 Silicon Carbide Seal Kit No. 3430-0589 Contains one each: mechanical seal (Ref. 7) and o-ring (Ref. 5).

NOTE: When ordering parts, give QUANTITY, PART NUMBER, DESCRIPTION, and COMPLETE MODEL NUMBER. Reference numbers are used ONLY to identify parts in the drawing and are NOT to be used as order numbers. Ref # 1 1 2 2 2A

Qty Req. Part # 4 2406-0007 4 2406-0016 1 0154-9200C1 1 0154-9200S1 1 0157-9200C

3 3 4 4

1 1 1 1

4 5 6 7

1 1 1 1

8 8 9 9 10 11 12 13 14 15 16 17 18 19 19 19 20 21 22

1 1 4 4 1 1 1 1 1 2 1 1 1 1 1 1 1 4 2

Description Price Drain/Vent Plug (9306C) $0.85 H Drain/Vent Plug (9306S) $7.30 H Pump Casing (9306C) $296.00 H Pump Casing (9306S) Pump Casing (Universal Flange 220x200) $176.00 H 0158-9200C Pump Casing (Universal Flange 300x220 Cast) 0158-9200S Pump Casing (Universal Flange 300x220 S.S.) 2253-0002 Impeller Nut (9306C) $4.85 H 2253-0006 Impeller Nut (9306S) 0401-9200P2 Impeller (Nylon Std. 9306C) $88.25 H 0405-9100P2 Impeller (Polypropylene Optional) (Std. 9306S) 0407-9306P Impeller (GTX Optional) 1720-0083 O-ring $2.95 H 1700-0100 Gasket $4.10 H 2120-0009 Mechanical Seal (Viton/Ceramic) (Std. 9306C) 3430-0589 Mechanical Seal (Silicon Carbide) (Std. 9306S) 0750-9300C Mounting Flange (9306C) $115.00 H 0756-9300S Mounting Flange (9306S) 2210-0020 Hex Head Cap Screw (9306C) $0.80 H 2210-0125 Hex Head Cap Screw (9306S) 1410-0056 Slinger Ring $1.05 H 1810-0014 Snap Ring $0.90 H 1820-0013 Retaining Ring $1.00 H 2000-0010 Ball Bearing $9.05 H 1410-0131 Cartridge, Front 1720-0268 O-ring 2104-0010 Lip Seal 1410-0130 Seal Spacer 2029-0014 Thrust Bearing Assembly $25.25 H 0531-2500 Shaft (HM2C/HM4C) 0533-2500 Shaft (HM1C/HM5C) $143.00 H 0536-2500 Shaft (HM3C) 0150-2500C Motor Body (includes needle bearing) 2210-0005 Hex Head Cap Screw 1720-0110 O-ring $1.00 H

1-800-373-4084

Ref # 23 23 23 24 24 24 25 25 25 25 25 26

Qty Req. Part # 1 1600-0045 1 1600-0044 1 1600-0052 1 1600-0042 1 1600-0037 1 1600-0068 1 3900-0022 1 3900-0023 1 3900-0024 1 3900-0025 1 3900-0048 1 0701-2500C1

0700-2500C1

0703-2500C1

0702-2500C1

0704-2500C1

0254-2500C

28 29

4 4

2270-0039 2220-0045

29 29 29 30 31

4 4 4 1 1

2220-0021 2220-0044 2220-0032 1720-0108 3360-0021

32 33 34 35 36 37 38 38 38 39 40 40

1 1 1 1 1 1 1 1 1 1 1 1

1720-0262 3320-0051A 3220-0029 1700-0047 2270-0027 2250-0038 1610-0032 1610-0031 1610-0055 1810-0026 1610-0012 04432

Parts Kit No. 3430-0748 Contains: One each ball bearing (Ref. 13), motor shaft seal (Ref.16), thread seal gasket (Ref. 35), two cartridge o-rings (Ref. 15) and washer (Ref. 36); two each motor housing o-rings (Ref. 22), and port adapter o-rings (Ref. 30 & 32).

Description Price Dowel Pin (HM2C / HM4C) Dowel Pin (HM1C/HM5C) Dowel Pin (HM3C) Dowel Pin (HM2C / HM4C) Dowel Pin (HM1C/HM5C) Dowel Pin (HM3C) Gerotor (HM1C) $159.00 H Gerotor (HM2C) $146.00 H Gerotor (HM3C) $204.00 H Gerotor (HM4C) $157.00 H Gerotor (HM5C) $162.00 H Gerotor Housing $151.00 H (HM2C Models) 1/4” wide Gerotor Housing $101.00 H (HM1C Models) 1/2” wide Gerotor Housing $96.50 H (HM4C Models) 5/16” wide Gerotor Housing $158.00 H (HM3C Models) 1” wide Gerotor Housing $125.00 H (HM5C Models) 5/8” wide Motor End Plate $0.00 H (includes needle bearing) Washer $0.85 H Cap Screw (HM2C/HM4C $1.25 H Models) Cap Screw (HM1C Models) Cap Screw (HM3C Models) Cap Screw (HM5C Models) O-ring $0.90 H Pressure Port Adapter $11.00 H (includes O-ring) O-ring Tank Port Adapter (includes O-ring) Bypass Adjusting Screw $7.50 H Gasket $3.55 H Washer $1.55 H Lock Nut $0.85 H Roll Pin (HM2C / HM4C) $6.70 H Roll Pin (HM1C / HM5C) $3.80 H Roll Pin (HM3C) Snap Ring $0.91 H Woodruff Key (9306C) $1.05 H Woodruff Key (9306S)

167

Misc. Info

Repair Parts Kit No. 3430-0332 Contains: One mechanical seal (Ref. 7), one o-ring (Ref. 5) and one rubber gasket (Ref. 6).

Replacement Parts for Pumps Replacement/Repair Parts for Demco Lil’ Thumper OUTLET

OUTLET

28 14

29 23

40 21

INLET 12

43 55

41 48

1 59

10 44

36 50

47 3

27 31

Misc. Info Misc. Info

46 46 52 27

Cutaway View of Piston Wipers and Support Ring Showing Proper Installation.

33 INLET

20 11

22 22

38 57

Main Shaft Bearing Pressed In Case

Piston Pump Parts List

Serial #250000 and Up

Ref Part Qty No. No. PP1 PP2 Description 1. 00087 2 2 5/16”-18UNC x 5/16” Socket Set Screw 2. 00914 2 2 3/8”-16UNC x 1-1/2” Hex Bolt 3. 01166 2 4 Pump Connecting Slide Cover 4. 01167 2 4 Pump Connecting Slide 5. 01168 1 2 UHMW Piston 6. 01169 1 2 Drive Hub, Adjustment Side 7. 01171 1 2 Large Eccentric 8. 01172 1 2 Small Eccentric 9. 01173 1 2 Connecting Rod 10. 01176 1 1 Adjustment Disc 11. 01177 2 4 Drive Hub Thrust Bearing 12. 01191-95 1 1 Adjustment Pointer 13. 01265 1 2 Piston Rod 14. 01313 2 4 SS Piston Thrust Washer 15. 01317 1 2 Wrist Pin 16. 01318 2 4 Wrist Pin Snap Ring 17. 01320 2 4 Intake Manifold Check Valve (Blue) 18. 01321 2 4 Exhaust Manifold Check Valve (Red) 19. 01390 2 4 Drive Hub Adjusting Pin 20. 01391 21. 01426 1 2 Drive Case Gasket 22. 01516 2 2 Main Shaft O-Ring 23. 01517 1 1 Drive Hub Oil Seal (Adjustment Side) 24. 01520 2 4 Cylinder Housing Small O-Ring 25. 01521 3 6 Cylinder Housing Large O-Ring 26. 01522 4 8 Check Valve O-Ring 27. 01524 2 4 Piston Wiper 28. 01528 2 2 Main Shaft Snap Ring 29. 01529-95 1 1 Adjustment Pointer Locking Plate 30. 01530 1 2 Piston Rod Retaining Block 31. 01534 2 4 Cylinder Housing 32. 01535 6 12 Large Clamp 33. 01536 2 4 Intake/Exhaust Manifold

168

28 39

Ref Part Qty No. No. PP1 PP2 Description 34. 01537 1 2 Piston Wiper Support Ring 35. 01538 1 2 End Cap 36. 01539 8 16 Small Clamp 37. 01597 1 2 1/4” NPT Nylon Breather Plug 38. 01596 1 — 1-1/4” O.D. Main Shaft for PP1 39. 01979 1 1 1-1/4” I.D. 8 Ga. Machine Bushing 40. 01989 1 1 1/4” x 1/4” x 1” Key 41. 12489 1 2 Piston Rod Guide Bushing O-Ring 42. 01992 1 2 Piston Rod Guide Bushing 43. 01993 1 2 Rear Stackpack Retainer O-Ring 44. 01996 17 34 5/16”-18UNC Stainless Steel Hex Nut 45. 01997 17 34 5/16” Stainless Steel Lockwasher 46. 01998 34 68 5/16” Stainless Steel Flatwasher 47. 02000 8 16 1/4”-20UNC Stainless Steel Hex Nut 48. 02001 8 16 1/4” Stainless Steel Lockwasher 49. 02002 16 32 1/4” Stainless Steel Flatwasher 50. 02004 8 16 1/4”-20UNC x 2-1/4” SS Hex Head Bolt 51. 02005 6 12 5/16”-18UNC x 3” SS Hex Head Bolt 52. 02006 11 22 5/16”-18UNC x 1” SS Hex Head Bolt 53. 02200 1 1 Half Drive Case 54. 04632 1 2 3/8”-16UNC Stainless Steel Locknut 55. 04642 1 2 Grease Zerk 56. 5136 1 2 Stackpack Sub-Assembly 57. 11924 1 1 Half Drive Case (Clutch side) 58. 11926 1 1 Drive Hub, Clutch Side 59. 11927 - 1 Center Drive Case 60. 11929 1 1 Drive Hub Oil Seal (Clutch side) 61. F1200 2 4 1/2” NPT Nylon Plug 62. F1400 5 10 1/4” NPT Nylon Plug 63. 02501 2 2 Main Shaft Bearing (pressed in case) 64. 01582 1 1 Pump Rate Chart 65. 11521-95 1 1 Pump Adjusting Tool

www.horvick.com

Replacement Parts for Pumps Replacement/Repair Parts for Norwesco 4-Bolt Ball Valve C E G G

HV34

HV100

61721 $2.28 H

61722 $2.55 H

61723 $4.27 H

61724 $6.59 H

61725 $4.92 H

61725 61726 $4.92 H $6.59 H

(E) Valve Stem

61359 $2.28 H

61446 $2.28 H

61360 $4.55 H

61361 $6.82 H

61360 $4.55 H

61360 61361 $4.55 H $6.82 H

(G) Flange

62051 $6.25 H

62052 $6.25 H

62053 $6.25 H

62054 $8.52 H

62055 62056 62057 62059 $8.52 H $11.50 H $11.50 H $11.50 H

62060 62065 62057 62059 62060 $15.91 H $30.00 H $11.50 H $30.00 H $15.91 H

(H) Teflon Seat

62077 $2.28 H

62076 $2.84 H

62075 $3.41 H

62074 $4.55 H

62073 $7.96 H

62075 $3.41 H

62075 62074 $3.41 H $4.55 H

(I) Large Body EPDM O-ring Seal

61378 $1.13 H

61379 $1.71 H

61380 $1.71 H

61381 $3.30 H

61382 $3.97 H

61380 $1.71 H

61380 61381 $1.71 H $3.30 H

(J) Valve Body

61383 $5.68 H

61384 $6.53 H

61385 $7.38 H

61386 61387 61385 $13.07 H $21.83 H $7.38 H

61385 61386 $7.38 H $13.07 H

(K) Valve Ball

61388 $5.12 H

61389 $5.68 H

61390 $9.38 H

61391 61392 61390 $11.36 H $22.74 H $9.38 H

61390 61391 $9.38 H $11.36 H

w/ Teflon Seat for Nozzle

—

62058 62061 62062 $22.14 H $21.03 H $24.99 H

Nozzle Pipe

—

61400 $5.68 H

Valve #

Top Flange

1-800-373-4084

HV200

6-bolt style Nozzle HV200 HV300 HV112- HV200- HV200FP N N FPN

61401 61401 $6.53 H $6.53 H

169

Misc. Info

HV12

4-bolt style HV100- HV114 HV114- HV112FP FP FP

Replacement Parts for Pumps Banjo Ball Valve Replacement Parts Banjo Parts Breakdown

G G

4-bolt style

Misc. Info

Valve #

V-050

V-075

V-100

V-100FP

V-125

6-bolt style V-125FP V-150

Nozzle

V-200 V-200FP V-300FP VA-150 VA-200 VA-200FP

(C) Banjo V-10153A V-10153A V-10153A V-10153A V-10153A V-20153 V-20153 V-20153 V-25153 V-25153 V-20152 V-20152 V-25152 Yellow $4.30 H $4.30 H $4.30 H $4.30 H $4.30 H $8.62 H $8.62 H $8.62 H $13.18 H $13.18 H $8.62 H $8.62 H $13.18 H Handle (G) Flange

V-05256 V-07257 V-07256 V-10257 V-10256 V-20267 V-20257 V-20256 V-25256 V-35264 V-20257 V-20256 V-25256 $9.41 H $9.42 H $9.42 H $11.31 H $11.31 H $12.58 H $12.58 H $12.58 H $18.48 H $47.93 H $12.58 H $12.58 H $18.48 H

(J) Valve Body

V-07254 V-07254 V-07254 V-10254 V-10254 V-20254 V-20254 V-20254 V-25254 V-35254 V-20254 V-20254 V-25254 $8.17 H $8.17 H $8.17 H $8.46 H $8.46 H $12.08 H $12.08 H $12.08 H $16.39 H $33.67 H $12.08 H $12.08 H $16.39 H

Top Flange Nozzle

—

V-20262 V-20261 V-25261 $26.04H $26.04 H $40.69 H

Nozzle Pipe

—

V-20166 V-25165 V-25165 $6.66H $7.09H $7.09H

Repair Kit

V-07200 V-07200 V-07200 V-10200 V-10200 V-20200 V-20200 V-20200 V-25200 V-35200 V-20200 V-20200 V-25200 $23.08 H $23.08 H $23.08 H $27.62 H $27.62 H $41.44 H $41.44 H $41.44 H $54.54 H $140.96 H $41.44 H $41.44 H $54.54 H

Valve Repair Kits Contain:

1 Ball, 2 Ball Seats, 2 Body O-Rings, 1 Upper Stem Bushing, 1 Thrust Washer, 1 Stem O-Ring

170

www.horvick.com

Replacement Parts for Pumps CDS-John Blue Impellicone Flow Divider Replacement Parts ASSEMBLY DRAWING AND PARTS LIST

CDS-John Blue Impellicone Splitter Replacement Parts ASSEMBLY DRAWING AND PARTS LIST

Models: IP-0600 - 6 port IP-1300 - 13 port IP-1800 - 18 port

Top of Unit Mount Vertically

Models: IPS-3 - 3 port IPS-4 - 4 port

Outlet Ports – 1” NPT

Top of Unit Mount Vertically

(Remove all plastic thread protectors insert fitting or pipe plugs)

Outlet Ports - ¼” NPT (Remove all plastic thread protectors insert hose barbs or pipe plugs)

Pressure Gauge Port - ¼” NPT Pressure Gauge Port – ¼” NPT

Inlet - 1-1/4” NPT (Connect discharge from pump or meter, recommend using straight pipe)

Inlet Port – 1” NPT (Connect to discharge from pump or meter, recommend using straight pipe)

Description Serial Tag Aluminum Body High Collar Lock Washer SS Impellicone Needle O-ring 1/4-20 SHCS Stainless Steel Cap Assembly Danger Tag (Included In Cap Assembly) 1/4 NPT Plug SS

IP-0600 Parts List Part # Qty 115496-01 1 116084-01 1 115519-01 4 115520-01 1 115521-01 1 115525-01 4 115526-91 1 115527-01 1 115533-01 1

IP-1300 Parts List Part # Qty 115496-01 1 115518-01 1 115519-01 4 115520-01 1 115521-01 1 115525-01 4 115526-91 1 115527-01 1 115533-01 1

IP-1800 Parts List Part # Qty 115496-01 1 115532-01 1 115519-01 5 115531-01 1 115530-01 1 115525-01 5 115529-01 1 115527-01 1 115533-01 1

Impellicone Flow Divider Replacement Parts Item Description 1 Serial Tag 2 Aluminum Body 3 High Collar Lock Washer SS 4 Impellicone Needle 5 O-ring 6 1/4-20 SHCS Stainless Steel 7 Cap Assembly 8 Danger Tag (Included In Cap Assembly) 9 1/4 NPT Plug SS

Description Serial Tag High Collar Lock Washer SS O-ring 1/4-20 SHCS Stainless Steel Danger Tag ¼ NPT SS Pipe Plug Cap Body

IPS-3 Parts List Part # Quantity 115496-01 1 115519-01 6 115521-01 1 115525-01 6 115527-01 1 115533-01 1 115548-01 1 115549-01 1

IP-1300 Parts List I P-1800 Parts List Part # Qty Price 115496-01 1 $ 115518-01 1 $ 115519-01 4 $ 115520-01 1 $ 115521-01 1 $ 115525-01 4 $ 115526-91 1 $ 115527-01 1 $

Part # 115496-01 115532-01 115519-01 115531-01 115530-01 115525-01 115529-01 115527-01

Qty 1 1 5 1 1 5 1 1

115533-01

Part # 115496-01 115519-01 115521-01 115525-01 115527-01 115533-01 115550-01 115551-01

Qty 1 8 1 8 1 1 1 1

IPS-4 Parts List Part # Quantity 115496-01 1 115519-01 8 115521-01 1 115525-01 8 115527-01 1 115533-01 1 115550-01 1 115551-01 1

Price $ $ $ $ $ $ $ $ $

Impellicone Splitter Replacement Parts Item Description 1 Serial Tag 2 High Collar Lock Washer SS 3 O-ring 4 1/4-20 SHCS Stainless Steel 5 Danger Tag 6 ¼ NPT SS Pipe Plug 7 Cap 8 Body

1-800-373-4084

IPS-3 Parts List IPS-4 Parts List Part # Qty Price 115496-01 1 $ 115519-01 6 $ 115521-01 1 $ 115525-01 6 $ 115527-01 1 $ 115533-01 1 $ 115548-01 1 $ 115549-01 1 $

Price $ $ $ $ $ $ $ $

171

Misc. Info

Item 1 2 3 4 5 6 7 8 9

Item 1 2 3 4 5 6 7 8

Fax Order TOLL FREE FAX 1-800-368-5321 Billing Address

Shipping Address (if different)

Name_________________________________________ Name_________________________________________ Address_______________________________________ Address_______________________________________ City, State, Zip_________________________________ City, State, Zip_________________________________ Phone_________________________________________ Phone_________________________________________

Misc. Info

Purchase Order #______________________________ By:____________________________________________ Ship Via UPS

P. Post

Qty

Part #

SPEE DEE

Will Call

Other____________________________

Item

__________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ __________ _______________________________ _________________________________________________ Notes: ______________________________________________ _______________________________________________ ______________________________________________ _______________________________________________ ______________________________________________ _______________________________________________ ______________________________________________ _______________________________________________ ______________________________________________ _______________________________________________ ______________________________________________ _______________________________________________ This form can be downloaded at: www.horvick.com/catalog/orderform

172

www.horvick.com

Fax Order TOLL FREE FAX 1-800-368-5321 Shipping Address (if different)

P. Post

Qty

Part #

SPEE DEE

Will Call

Other____________________________

Item

1-800-373-4084

173

Misc. Info

Billing Address

Catalog Index B Ball Valves. See Valves Barrel Adapters.................................... 55 Booms. See Spray Booms Bucket Elevators.................................. 30

C Cables.................................................. 114 Extension Cables............................. 114 Magnetic Speed Sensor Cables......... 114

Radar Interface............................... 114 Cable Ties............................................. 63 Calibration Containers......................... 55 Camera Systems Mounting Grip.................................. 94 Cam Lever Couplings-Polypropylene....... 72–73 Carts. See Trailers Blue Mule™ Duo Steer.................... 28 Horvick Spray Tote........................... 26 Horvick Super Cart........................... 28 Chemical Calibration Containers..................... 55 Chemical Injection System SCS-Sidekick Add-on Direct Injection System............................................. 106 Chemical Meters. See Pump Accessories Clamps-Hose. See Hose Accessories Contact Herbicide Applicators Carpet Roller Chemical Applicators.. 7 Red Weeder Herbicide Applicator.... 7 Controllers/Monitors EPD Electric Pump Driver............... 109 Micro-Trak Calc-An-Acre................ 109 Micro-Trak Shaft-Trak Monitor..... 109 ProPlant - Automatic Seed Rate Controller........................................ 108 Whirlwind™ Blockage Monitor.... 111 Conveyors Drive Over Belt Conveyor................ 32 Field Loader...................................... 32 Honeycomb Belt Conveyor.............. 30 Rapat Series CU................................ 30 Self-Propelled Conveyor Attachment... 32 Tube Converyor................................ 31

INDEX

D Decals NH3 Safety Decals.......................... 152 Slow Moving Vehicle Sign............. 152 Demco................................................. 5–9 Density Scale...................................... 157 Drop Tubes Herbicide........................................... 55 Drum Valves......................................... 77 Dry Breaks...................................... 64–65 Banjo Polypropylene........................ 52 Drum Valve....................................... 64 Accessories.................................... 64 Barrel Adapters............................ 64 Coupler Rinsing Socket................ 64 Spare Parts.................................... 64 Macro Valve...................................... 64 Mounting Bracket........................ 64 Rinsing Socket (EPDM)................. 64 Seal Kits........................................ 64

174

User Kits........................................ 64 Dry Material Equipment Bucket Elevators............................... 30 Fertilizer Blending-Vert. Hopper..... 30

E Elbows. See Fittings Electronic Wind Meters..................... 156

F Fertilizer Blending Systems-Vertical Hopper.. 30 Bucket Elevators............................... 30 Spreaders/Tenders...................... 33, 34 High Clearance Spreaders........... 33 Pull Spreaders............................... 33 Tenders-Truck or Trailer.............. 34 Fire Extinguisher................................ 157 Fire Nozzle............................................ 84 Fittings............................................ 65–77 Caps................................................... 69 Couplers............................................ 67 Crosses............................................... 69 Garden Fittings.... 77. See Garden Hose Fittings Hose Barb Elbows and Menders..... 66 Hose Barbs........................................ 65 Manifold Fittings........................ 74, 75 Nipples.............................................. 70 Pipe Sealers....................................... 76 Plugs.................................................. 68 Polypropylene Cam Lever Couplings.... 72–73 Reducer Bushings............................. 67 Reducing Nipples & Couplers.......... 70 Street Elbows-45°............................. 69 Street Elbows-90°............................. 68 Tee Barb............................................... 71 FPT x Barb..................................... 71 Gauge Threaded.......................... 71 MPT x Barb................................... 71 Tees................................................... 69 Threaded Elbows.............................. 68 Unions............................................... 69 Flags Field Marker Flags.......................... 157 Flanged Fittings. See Fittings-Manifold Flow Meters Banjo 2” Full Port Flow Meter....................................... 93 Micro-Trak Flowmeter................... 113 Raven Flow Max 110 Flow Meter.... 93 Raven Flow Max 220 Flow Meter.... 93 Foam Foam Dye............................................ 4 Marker Equip...................................... 4 Marking Foam.................................... 4 Formulas & Conversions.................... 158

G Garden Hose Fittings........................... Garden Hose Adapter...................... Garden Hose Hand gun................... Male Garden Hose........................... Misc Hose Fittings............................ Quick Connect.................................. Gas-Driven Transfer Pumps Lovejoy-style Couplers.....................

77 77 85 77 77 77 40

Gas Engines Honda Engines................................. 40 Gauges-Steel Cased............................. 84 Anhydrous (SS)................................. 84 Back Mount...................................... 84 Liquid Filled...................................... 84 NH3 Gauges............. 149. See also NH3 Application Stem Mount...................................... 84 Gauge Threaded Tee........................... 71 Gloves................................................. 155 GPS Guidance GPS Receivers.................................... 94 Matrix Guidance............................. 107 Raven Cruizer II................................ 95 TeeJet® CenterLine 220................. 107 GPS Steering Systems.......................... 99 Raven SmartSteer Steering System. 99 Smartrax Steering System................ 99

H Handguns. See Spraying Systems Herbicide Barrel Adapters................................ 55 Calibration Containers..................... 55 Meters..................... 54. See also Meters Nutating Disc Meter.................... 54 Nylon Digital Meter..................... 54 Nozzle Valves.................................... 55 Pumps. See Pumps Suction Drop Tubes & Hose............. 55 Hitches & Accessories........................ 153 Heavy Duty Hitch Pins.................... 153 Schuck Cushion Hitches................. 153 Torpedo Hitch................................. 153 Hose Discharge-PVC Lay Flat.................... 60 Discharge-Rubber (T253)................. 60 Downspout 620WD.......................... 60 Grain Handling BL-180..................... 60 Sight Gauge Braided Tubing........... 60 Sight Gauge PVC Hose..................... 60 Sprayer Hose Braided EVA Tubing.................... 59 EVA (translucent)......................... 59 HD Rubber GST II......................... 59 PVC 600#(Ag Spray)..................... 59 Rubber GST II (200#).................... 59 Suction Hose Bumblebee (#300 EPDM )............ 58 Crosslink (T-509)........................... 58 ESH (390 SD) EPDM Rubber......... 58 PVC Suction.................................. 58 Rubber Wire Suction.................... 58 Hose Accessories Hose Clamps..................................... 63 Cable Ties...................................... 63 Micro-Gear.................................... 63 Quick-Release............................... 63 Standard....................................... 63 T-Bolt Clamp................................. 63 Hose Cutters..................................... 62 Hose Reels......................................... 62 Swivel............................................ 62 Hose Barbs. See Fittings

L Lights Highway Safety Light..................... 157

www.horvick.com

Catalog Index M Manifold Fittings............... 74–75, 75–76 Manifolds / Kits. See also NH3 Manifold Systems RedBall Flow Monitor.................... 138 Wilger Flow Monitor..................... 136 Measuring Wheel............................... 156 Meters Chemical Meters............................... 53 Sotera Meters............................... 53 Fuel Meters....................................... 56 GPI Nozzle Meter......................... 56 Herbicide Meters.............................. 54 3N31-GM Nylon Electronic Digital Meter................................ 54 FM300H Plastic Electronic Disc Meter..................................... 54 Moisture Testers................................ 115 Grain Analysis Computer............... 115 Grain Moisture Analyzer............... 115

1-800-373-4084

O Outlet Adapters................................. 122

P Pipe Fittings. See Fittings Pipe Sealers.......................................... 76 Pipe Size Threaded Fittings Chart...... 71 Planting Controllers/Monitors. See Controllers/ Monitors Plugs. See Fittings Power Grip........................................... 94 Pressure Line Tubing. See Tubing Pump Accessories Buna-N Spiders................................. 40 Chemical Meters......................... 53, 54 Lovejoy Style Couplers..................... 40 PTO Couplers.................................... 48 Shaft Replacement Seal................... 57 Pumps Chemical Pumps....................... 50. See also Pumps - Hand Pumps Chemtraveller............................... 50 Series 400 Diaphragm Pump....... 50 Diaphragm Pumps............................ 46 Electric Pumps 12 Volt.......................................... 43 12-Volt Speed Controls................ 43 ShurFlo 8000 Series Diaphragm Pump Parts.................................................... 165

Shurflo Diaphragm Pump............ 42 Swivel Adapters................................... 42

Super Flow Pump......................... 43 Electric Transfer Pumps Pump/ Motor Combinations........ 44 Gas-Driven Transfer Pumps....... 36–39 Cast Iron Centrifugal... 36, 160–161 Parts.................................................... 160

Misc Pumps................................... 39 Poly Centrifugal........... 37, 163, 164 Ground Drive Pumps........................ 49 Hand Pumps Chemical....................................... 52 Fuel............................................... 52 Herbicide Pumps............................... 51 Aluminum..................................... 51 Plastic............................................ 51 Hydraulic Motor Driven Cast Iron Pump................................................. 44 Hypro Series 9200 Cast Iron, Pedestal

& Flange............................................ 45 Hypro Series 9300 Cast Iron, Pedestal & Flange............................................ 45 Pedestal Pumps................................. 41 Hypro Series 9200........................ 45 Piston Pump...................................... 46 PTO Trailer Pumps............................ 35 Roller Pumps..................................... 47 Roller Pumps Parts....................... 48 Rotary Gear....................................... 41 Speed Controls-12v.......................... 43 Wet Seal Pumps................................ 38

R Rain Gauge......................................... 156 Ratchet Straps...................................... 18 Reducer Bushings. See Fittings

S Safety Equipment...................... 154, 155 3M Reflective Tape........................ 155 Booties............................................ 154 Eye Wash Bottle............................. 154 Gloves.............................................. 155 Goggles........................................... 154 Lights. See Lights Rinse & Storage Combo Tanks...... 155 Safety Protection Kit...................... 155 Tyvek Coveralls............................... 154 Vinyl Coated Aprons...................... 155 Water Storage Tanks..................... 155 Seeder Meter...................................... 157 Soil Probe........................................... 156 Speed Sensors Astro II GPS Based Speed Sensor..... 94 Speed Sensor Cables...................... 103 Spra-Coupe Parts............................... 8–9 Spray Booms 21’ and 28’ Truss Style Booms............................. 22 45’, 50’, and 60’ Flotation Boom..... 22 45’ Manual Fold Truss Style Boom.. 22 Boom Management................... 96–97 Raven Autoboom......................... 96 Raven OmniRow........................... 97 Raven SmartBoom........................ 97 Sprayer Controls Boom Management Raven Autoboom......................... 96 Micro-Trak Automatic Rate Controllers...................................... 108 MT-3405F II................................. 108 SprayMate II............................... 108 Power Grip........................................ 94 Raven Accu-Flow Attachment....... 105 Raven SCS 11 Sprayer Control....... 102 Raven SCS 203 Sprayer Control..... 102 Raven SCS 440 Console.................. 100 Raven SCS 440 System Components..... 102–103 Cables.......................................... 102 Control Valves............................ 102 Flowmeters................................. 102 System Component Diagram.... 101 Raven SCS 450 Console............ 94, 100 Sprayers 3-Point 150/200 Gallon 3-Point................ 21 300, 400 & 500 Gallon 3-Point.... 21 Demco............................................. 5–9

175

INDEX

NH3 Application Dust Caps........................................ 146 Fittings Cast Iron Manifold Barbs........... 149 Manifold Plugs........................... 149 U-Bolts........................................ 149 Gauges............................................ 149 Float Gauge Replacement Dials. 149 Float Gauges............................... 149 Stem-Mounted NH3 Pressure Gauges........................................ 149 NH3 Knives & Tubes.............. 140–141, 141–142 Chisel Plow................................. 140 Conversion Tubes....................... 141 Field Cultivator........................... 140 Schedule 40 Replacement Tubes....... 140 TK Heavy Duty NH3 Applicator Knife........................................... 140 Weise Applicator Knives............ 140 Wiese Chisel Plow...................... 141 Planter Manifold Kits & Components... 137 Raven Accu-Flow HP...................... 105 Shanks & Shank Clamps................. 142 Fiberboard Insulators................. 142 Hose Clip..................................... 142 Shanks & Knife Plates................ 142 NH3 Controllers Micro-Trak MT-NH3 Automatic Controller..................... 110 NH3 Hose, Clamps, Connectors........ 148 Black EPDM..................................... 148 EVA Hose........................................ 148 Reusable Clamp.............................. 148 NH3 Manifold Systems.............. 150, 151 Basic Kit........................................... 146 Continental MVD Manifold System...... 151 MVD Manifold Kit.......................... 151 Vertical Dam Manifold.................. 151 NH3 Meters........................................ 143 Continental 9500 Meter................ 143 Continental Meter Matic............... 143 John Blue Nitrolator...................... 143 John Blue Nitropacer..................... 143 NH3 Safety Decals.............................. 152

NH3 Tank Parts Bleed Valve..................................... 145 Fill Coupler...................................... 145 Flo-Max NH3 Coupling................... 147 Gaskets............................................ 148 Hose with Ends............................... 146 Hydrostatic Valve........................... 145 Parking Plug................................... 145 Pioneer Breakaway Coupler.......... 146 Speed Couplers............................... 145 NH3 Valves NH3 Tank Valves............................ 144 Valve Repair Kits............................ 145 Nozzle-Banjo........................................ 79 Nozzle Bodies and Accessories. See Spray Tips Nozzle-Norwesco................................. 79 Nozzle Valves....................................... 55

Catalog Index Lawn & Garden.................................. 40 Gallon Pro Series....................... 60/80 Gallon Pro Series.................. Backpack Sprayer - Electric............ Economy Spot Sprayer................... Spot Sprayer With Boom...............

5 5 5 7 6 6

INDEX

Boom Kit................................................ 6

Tandem Axle ATV Sprayer. 7, 20, 21 Spray Tote......................................... 26 Super Cart......................................... 28 Tanks Front Mounted Tanks.................. 24 Inline Tank Unit........................... 23 NH3 Tank Trailers......................... 29 Nurse Tanks............................ 27, 28 Side Mounted Tanks.............. 23, 24 Spraying Accessories Field Marker Flags.......................... 157 Spraying Reference Info Nozzle Spacing............................... 159 Spray Coverage Information......... 159 Spray Tip Selection Guide.............. 123 Suggested Minimum Spray Heights...... 159 Spraying Systems Handguns.......................................... 85 Adjustable Cone Tips................... 86 Garden Hose Hand gun............... 85 Gunjet® Spot Spraying................ 85 Heavy Duty Handgun.................. 85 Swivels.......................................... 86 TriggerJet..................................... 85 TriggerJet® Model 50800............ 86 Strainers. See Strainers Spray Tips Boomless Spray Tips....................... 132 Adjustable Single Off-Center.... 132 Nonadjustable Double Spray.... 132 XP BoomJet................................ 132 Broadcast Spray Tips AIXR TeeJet®............................. 126 FloodJet® Series......................... 129 Off-Center Flat Fan.................... 131 TeeJet®....................................... 126 TeeJet® 150° Double Outlet..... 131 TeeJet® Air Induction................ 127 TeeJet® VisiFlo Even.................. 130 Turbo TeeJet®............................ 127 Turbo TeeJet® Induction........... 127 Turbo TwinJet®......................... 128 TwinJet®............................. 128, 130 XR TeeJet®................................. 126 Hypro Spray Tips............................ 134 FastCap Style.............................. 134 Guardian..................................... 134 GuardianAIR............................... 134 Twin Cap..................................... 134 Nitrogen Application..................... 133 Nitro-Bar..................................... 133 TeeJet StreamJet®..................... 133 Nozzle Accessories Boom Clamps.............................. 121 Check Valves............................... 121 Hose Drops................................. 121 Hose Shanks................................ 122 Inlet Connectors......................... 122 Outlet Adapters......................... 122 Strainers...................................... 122 Tip Cleaning Brush..................... 122 Nozzle Bodies Adapters..................................... 117 Ag-Chem® Nozzle Bodies......... 117

176

Nozzle Thread Parts................... 118 QuickJet® Dry Boom Nozzle Bodies. 118 Quick TeeJet 360 Nozzle Body.. 120 Quick TeeJet Swivel Body Assemblies............. 119 Quick TeeJet Triple Nozzle Bodie..... 119 Wet Boom................................... 117 Orifice Plates................................... 135 Quick TeeJet® Spray Tips.............. 116 Adapters & Acces....................... 116 Steering. See also GPS Steering Strainers.......................................... 87–92 “Frog” Strainer................................. 90 Kleen Flo Lake Strainer.................... 90 Line Strainers.................................... 87 Hypro Line Strainers.................... 89 Replacement Screens & Parts............. 89

Line Filter Replacement Screen Reference Chart........................... 88 Norwesco Line Strainers.............. 89 Series 126 Poly.............................. 87 Replacement Parts............................... 87

Manifold 1” Y-Strainers............................... 2” Y-Strainers............................... Replacement Parts....................... T-Strainers..................................... T-Strainers......................................... Banjo Poly T-Strainer...................

92 92 92 92 90 90

Replacement Parts and Screens.......... 90

Y-Strainers Banjo Polypropylene.................... 91 Parts & Replacement Screens............. 91

T Tank Parts & Acces. Agitators........................................... 18 Anti-Foam......................................... 19 Bulkhead Fittings............................. 17 Decontaminator............................... 19 Gaskets.............................................. 17 Jet Rinse............................................ 19 Lids & Parts....................................... 17 Ratchet Straps................................... 18 Spray Ball Tank Rinse....................... 19 Tank Cleaning Agent....................... 19 Vent Cap........................................... 18 Water Control Valve........................ 18 Tanks Front Mounted Tanks...................... 24 Liquid Tank Trails. See also Carts or Trailers Mix Tanks.......................................... 16 Chemical Induction Packages...... 16 Eductor 40/80............................... 16 Liquid Inoculator.......................... 16 NH3 Tank Trailers. See also Carts or Trailers Nurse Tanks................................ 27, 28 Pest Control...................................... 15 Side Mounted Tanks.................. 23, 24 Specialty............................................ 15 Sprayer.............................................. 11 Elliptical........................................ 14 Elliptical Leg................................. 14 Storage Tanks............................. 10–14 Below Ground.............................. 12 Cone Bottom................................ 13 Horizontal Liquid Storage........... 11 Liquid Storage Tanks................... 10

Pickup Truck................................. 12 Transport...................................... 10 Vertical Bulk Storage................... 10 Tee. See Fittings Tees. See Fittings Towing Accessories Hitch Pins........................................ 153 Trailers. See Carts Liquid Tank 6,000 Gallon Cone-Bottom Tender................... 25 Duo-Lift Cone Bottom Tandem Wagon.......................................... 27 Horvick Spray Trailers.................. 26 Low Boy Wagon........................... 25 NH3 Duo Lift Tank Trailers.................. 29 Low Boy NH3 Wagon................... 29 Tubing Pressure Line Tubing........................ 61 Fittings.......................................... 61

V Valves Ball Valves................................... 78–82 Banjo 3-Way Poly........................................... 80 4-Bolt.................................................... 79 6-Bolt.................................................... 79 Flanged Manifold Valves.................... 80 Polypropylene Bolted.......................... 80 Replacement Parts............................. 170 Spin Weld............................................. 80

Brass.............................................. 81 Norwesco 4-Bolt............................................ 79, 169 6-Bolt.................................................... 79 Multi-Port............................................. 78 Polypropylene Bolted.......................... 78 Single Union........................................ 78

Poly............................................... Replacement handles................... Stainless Steel............................... Check Valve (PVC)............................ Electrically Operated Valves 3-Way Valve.................................. BANJO Electric Ball Valves...........

81 81 81 84 82 83

Replacement Motor............................ 83

Boom Valve.................................. 83 Electric Ball Valves....................... 83 NH3 Servo Valves....................... 113 Regulating Control Ball Valve..... 83 Solenoid Shut-Off Valve.............. 82 Electric Pressure Regulator.............. 84 Pressure Relief & Control Valves..... 81 Aluminum..................................... 81 Poly/Aluminum............................. 81 Polypropylene.............................. 81 Throttling Valve............................... 84

W Water Storage Tanks......................... Weather Related Electronic Wind Meters................. Rain Gauge..................................... Wind Meters................................... Wind Sock....................................... Wind Meters....................................... Wind Sock...........................................

155 156 156 156 156 156 156

www.horvick.com

Presorted Standard US Postage

PAID

Permit # 1423 Fargo ND

2013

4350 48th Ave. N. Fargo, ND 58102

Sales and Parts

1-800-373-4084

2013 Parts & Sales Catalog

Hours: M-F 8:00–5:00 Peak Seasons: M-F 7:30-6:00, Sat. 8:00–Noon www.horvick.com Questions/Parts Orders: parts@horvick.com

Fertilizer/Chemical Application Equipment & Parts Specialists

1-800-373-4084 www.horvick.com