Featured Products

AlphaAir450 UAS Lidar System N3 IMU GNSS Receiver

DJI Phantom 4 RTK

The AlphaAir 450 combines a highprecision IMU, industrialgrade GNSS, 3D Lidar scanner and RGB camera to provide an essential combination of long-range scanning and high-resolution imaging. The system achieves an absolute accuracy of 5-10cm and features advanced calibration and point cloud optimization for reduced range noise.

The AlphaAir 450’s Skyport connection allows direct interfacing with the DJI M300 and M200 V2. Weighing only 1kg, the AA450 can also be mounted on a wide range of multirotor and fi xed-wing VTOL drones that can support its weight with dedicated mounts to attach it.

View product:

Featuring 1198 channels for full-constellation and full-frequency tracking, an enhanced internal UHF for a working range of up to 15km, an improved high precision IMU allowing for a 60° tilt, low power consumption and over 24 hours of working time, the N3 receiver helps saving energy and brings higher effi ciency in conducting your survey tasks.

Partnered with SinoGNSS Survey Master fi eld software, ComNav Technology provides you with a fl uent and effi cient workfl ow.

More information at ComNav’s digital Intergeo booth

Phantom 4 RTK is a surveying drone for photogrammetry applications. It has a centimeter-level positioning system and a high-performance imaging system. It is portable and easy to use, and comprehensively improves the effi ciency of aerial surveys. • Max fl ight time: 30 min • Max transmission range: up to 4.34 miles (7km) • 20 MP 1-inch CMOS Sensor • Built-in RTK module, support PPK • Accurate positioning data with TimeSync • Integrated fl ight planning with GS RTK app • Complete mapping solution when used with DJI Terra

Meet DJI at booth 20C.02, hall 20

RIEGL VQ-1560II-S Dual Channel Airborne Mapping System

With increased laser power, the RIEGL VQ-1560 II-S offers superior performance and highest productivity based on a laser pulse repetition rate of 4MHz (2 x 2MHz) resulting in more than 2.66 million measurements per second on the ground. At typical operating fl ight altitudes between 500ft up to 12,800ft (ρ≥20%) an even point distribution can be achieved. In combination with different laser power levels, subtle optimization of acquisition parameters is possible which allows to meet specifi c project requirements in mapping ultra-wide areas, complex environments as well as in corridor mapping applications.

Meet RIEGL at booth 20C.22, hall 20

eSurvey GNSS EAS301 Gexcel HERON MS Twin

EAS301 is a new automatic steering system using an electric wheel. Based on GNSS technologies, the system is independently developed by eSurvey. Using a driving controller to carry out the steering strategy and controlling the steering wheel rotation axis to drive the agricultural steering wheel to automatically turn, the agricultural machine is controlled to run in AB straight lines and adaptive curves. HERON MS Twin is an outstanding 3D mapping system for surveying, geospatial, digital twin activities, appreciated in demanding projects, extreme indoor environments, underground mines, tunnels, multilevel buildings and complex construction sites.

The portable hardware features a compact capture head, a rugged control unit and a robust backpack. The capture head hosts a double laser sensor and a 5K RGB hi-res panoramic camera. HERON is equipped with two advanced software to: • Create 3D point cloud models leveraging a unique patented SLAM algorithm. • Edit, fi lter, and georeference models. • Extract deliverables. • Export to third-party software like ReCap Pro or cloud platforms.

Meet eSurvey GNSS at booth 23C.35, Hall 20 Meet Gexcel at Booth 20E.22, hall 20

Your Product Platform for Surveying, Positioning and Machine Guidance