Canadian Industrial Equipment News February 2009

Page 1

FEBRUARY 2009

www.cienmagazine.com

Serving Canadian Industry Since 1940

ELECTRICAL/ELECTRONICS

Pressurex Zero® Sensor Film measures very page 3 low contact pressures.

plus ... focus on enclosures, new product highlights, application features and upcoming events

Publications Mail Agreement #40069240

Please peel label & affix to Reader Reply Card

New Hinge Clamps are ideal for clamping in page 3 narrow spaces.

Stainless steel enclosure for the food and page 4 beverage process industry.

photo courtesy of Igus®

PAR30 LED Bulbs are available in 40° lightpage 6 emitting view angle.


Need More Temperature Options? Shop online at omega.ca ® 100,000 process control and measurement products (and counting)

Besoin d'un plus grand choix en température? Magasinez en ligne à

omega.ca

MD

100,000 produits de Mesure et de Contrôle de procédés

omega.ca

Free Hardbound Handbook The Canadian Edition Temperature Handbook and Encyclopedia

omega.ca

L' Encyclopédie Édition Canadienne de température à couverture rigide gratuite

FREE! g ra tu

English Service Français

Go to: www.omega.ca/dilbert for your daily dose of DILBERT! Visitez www.omega.ca/dilbert pour votre dose quotidienne de DILBERT! Starts at

À partir de

125

$

994

*CTXL-pH

*PATENTED

*UV1000 *PATENTED *Breveté Universal Verbalizer Multimeter

Starts at

À partir de

Hot/Cold Benchtop Dry Block Calibrator Étalon d'établi à bloc sec chaud/froid

$

100-pk

F2020 Series OMEGAFILM® RTD Elements Flat Profile Thin Film Platinum for OEM Applications Éléments RTD OMEGAFILMMD Film mince à profil plat en platine pour applications de première monte

CL1500 Series

Starts at

À partir de

2490

$

� Portable, Handheld Design � Built-In Speaker and Earphone Jack � Over 100 Built-In Engineering Units to Choose From � RS232 PC Interface � Verbalizes Signals While Connected to Other Measurement and Control Devices

*Breveté

pH & Temperature Input Circular Chart Recorder Enregistreur à Charte Circulaire avec une Entrée de pH et de Température

CN4000 Series Starts at 1 À partir de ⁄16, 1⁄8, and 1⁄4 DIN $ Temperature/Process Controllers with Fuzzy Logic Contrôleurs de température/procédé 1/16, 1/8 et 1/4 DIN à logique floue

Starts at

Starts at

À partir de

86

Starts at

À partir de

1835

À partir de

3250

$

181

$

$

Computer not included. Ordinateur non inclus.

RH-USB Humidity temperature sensor with USB connection Senseur d'humidité et de température avec connexion USB

KQXL/KMQXL Super OMEGACLAD® XL Thermocouple Probes, High Temperature!

TOTE Series Wrap-Around Tote Tank Heaters Réchauffeur-enveloppe de bac-citerne

Sondes Super OMEGACLADMD XL à très faible dérive à température élevée

it e

OMEGASAYS® Multimètre Universel Verbaliseur

Starts at

À partir de

299

$

� Modèle portatif � Haut-parleur et prise d'écouteur intégrés � Plus de 100 unités d'ingénierie intégrées � Interface PC RS232 � Verbalise les signaux lorsque branché à d'autres dispositifs de mesure et de contrôle

SA2C-RTD Series Flexible Molded RTD Surface Sensors Capteurs RTD surfaciels moulés flexibles

Starts at

À partir de

56

$

TM

*wi8 Series *PATENTED *Breveté 1

⁄8 DIN Meter Scanner

and Controller Analyseur-contrôleur d'instruments 1/8 DIN

Starts at

Starts at

À partir de

Starts at

À partir de

490

4325

$

$

*HHM290

BB703 Infrared Calibrator: Miniature Blackbody Calibration Source Étalon à infrarouge : Source d'étalonnage miniature à corps noir

*PATENTED *Breveté Infrared Pyrometer/ Multimeter Thermometer Pyromètre à Infrarouge/ Multimètre Thermomètre

Enregisteurs portatifs sans papier et postes de collecte de données

g Comin! Soon

Starts at

À partir de

244

$

UWTC-NB9 Series Wireless Thermocouple and RTD Industrial Probe Assemblies Ensembles sans fil de thermocouple et sonde industrielle RTD

Starts at

http://192.168.1.200

zSeries Group A

Starts at

À partir de

À partir de

156

$

ntôt! très bie

SA1XL Series The “All-in-One” Surface Thermocouple Le Themocouple de Surface “Tout-en-Un”

CHART

Save Current Graph

*UWTC Series *PATENTED Breveté Thermocouple-to-Wireless Connector/Converter The Smart Connector™ Connecteur/convertisseur de thermocouple à sans fil The Smart ConnectorMC

100 5-pk

$

1110

$

RD-MV1000 RD-MV2000 Series Portable Paperless Recorders and Data Acquisition Stations

À partir de

À partir de

306

$

Starts at

Starts at

À partir de

99

$

P0 Primary

LAB 100 Temp

30

C

LAB 100 RH

LAB100 Pres

1010

hPa

1200 100%

50

P1 Primary

P3 Primary

S0 Secondary

S2 LAB 100

À partir de

S3 Secondary

5 C/Div

90 10 hPa/Div %/Div

P4 Primary

S4 Secondary

P5 Primary

S5 Secondary

P6 Primary

S6 Secondary

P7 Primary

Starts at

S1 Secondary

P2 LAB 100

0

300 Tue Jun 5 10:18:10 PDT 2007

1 Minute

(5 Seconds/Div)

1 Minute 1 Day 1 Week 1 Month 1 Year

Main Menu

0%

244

$

S7 Secondary

Tue Jun 5 10:19:10 PDT 2007

*MWTC Series *PATENTED *Breveté Miniature Wireless Thermocouple Connectors, The Smart Connector™ Connecteurs miniatures The Smart ConnectorMC pour thermocouples sans fil

OS530E-DM E Series *PATENTED *Breveté OMEGASCOPE® Handheld Infrared Thermometer with Distance Measuring Options

Starts at

À partir de

430

$

TM

zED-T-P Series High Power Wireless Sensors Capteurs haute puissance sans fil

Thermomètre à infrarouge de poche OMEGASCOPEMD avec options de mesure à distance

Tip Enlargement

Starts at

Starts at

À partir de

Starts at

À partir de

615

106

$

$ HSRTD Series Flexible Sealed PFA RTD Sensors for Use in Corrosive Environments and Tight Places Senseurs RTD Flexibles et Scellés Recouverts de PFA pour Utilisation dans un Environnement Corrosif et Endroits Restreints

Industrial Non-Contact Infrared Thermometer/Transmitter Thermomètre/transmetteur industriel à infrarouge sans contact

Dual DIN Rail Temperature Transmitter Transmetteur de température sur rail DIN double

Starts at

À partir de

56

$

TXDIN70 OS550A Series

Starts at

À partir de

À partir de

88

3740

$

PRTF-12 Series Platinum RTD Sensors with Industrial Protection Heads Capteurs RTD en platine avec têtes de protection industrielles

$

CL1600 Surface Probe Calibrator Calibrateur de sondes de surface

Shop Online at

For Sales and Service, Call TOLL FREE

Shop Online:

pour les ventes et le service - composez

*PATENTED

omega.ca/209CI3

Covered by U.S. and International patents and pending applications Handbook Cover: © 2009 SEPS: Licensed by Curtis Publishing, Indianapolis, IN. All Rights reserved. Dilbert © United Feature Syndicate, Inc.

magasinez en ligne à

Magasinez en ligne à

No. 101

N° 101

®

*Breveté

Couvert par des brevets américains et étrangers et par des applications en cours

CIRCLE NO. 101 ON READER REPLY CARD

© COPYRIGHT 2009 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED © COPYRIGHT 2009 OMEGA ENGINEERING, INC. TOUS DROITS RESERVES


www.cienmagazine.com february 2009

On the cover ... HINGE CLAMPS february 2009 Vol. 70 No. 2 Editor and Associate Publisher Olga Markovich tel: (416) 510-5113 Publisher Michael King tel: (416) 510-5107

These new Hinge Clamps are ideal for clamping in narrow recesses. This is due to a special linkage that moves the clamping arm forward as it pivots into clamping position, allowing the clamp to exert nearly perfectly vertical clamping force. The clamping arm retracts fully for clear loading from above. Double acting, with a maximum operating pressure of 3600 psi max, the clamp is designed for 500,000 cycles, and contains a swivel contact bolt and reinforced hinge mechanism for added flexibility. Designed for manifold mounting, the clamp is available in more than 100 different variations with clamping forces from 500 to 3200 lbs., with optional position sensing.

Carr Lane Roemheld Mfg. Co.

Sales Manager Mark Larcher tel: (416) 510-5125 Circulation Diane Rakoff tel: (416) 510-5216 Art Director Sheila Wilson Production Manager Kim Collins Reader Service Liz Callaghan Administrative Assistant Diane Moskal Vice-President, Canadian Publishing Alex Papanou President, Business Information Group Bruce Creighton Advertising Representatives — Canada

CIRCLE NO. 11 ON READER REPLY CARD

SENSOR FILM

Pressurex Zero® pressure-indicating sensor film measures and maps very low contact pressures. It is an easy-to-use flexible film that is placed between contacting or mating surfaces to instantly and accurately measure and map pressure magnitude and distribution. Variations in contact surface pressure is immediately visible by the impression made on the film. The spatial resolution of the film is fine enough to expose minute surface defects and other imperfections. The range for Pressurex Zero® is 7.2 – 28 psi. Pressurex® comes in the form of a thin clear plastic sheet (4 or 8 mil), physically similar in appearance to paper. It is available in eight different pressure ranges. When placed between contacting surfaces, it instantaneously and permanently changes colour directly proportional to the actual pressure applied. The precise pressure magnitude is easily determined by comparing colour variation results to a colour correlation chart.

Sensor Products Inc.

KAL817_CORDS_CIENad_Feb09_City6_FIN

1/23/09 1:11 PM Page 1 CIRCLE NO. 12 ON READER REPLY CARD

BOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL P

Toronto, Ont.: Michael King, Mark Larcher S ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDU 12 Concorde Place, Suite 800, Toronto, ON. M3C RS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE 4J2. Tel. (416) 442-5600; Fax (416) 510-5140. OVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODU

PPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERE

Head Office FS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES 12 Concorde Place, Suite 800, Toronto, ON. M3C OTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS 4J2. Tel. (416) 442-5600; Fax (416) 510-5140.

TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLI

CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLA

BOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTR

Countless possibilities, millions of solutions

Subscription rates: Canada: $71.95 plus applic- LDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARDTM HOOKS OFFICE EQUIPMENT PHARM able taxes for one year, 11 issues; $115.95 for two PES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOO years, 22 issues. USA: $75.95 US Funds per year, ES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CL 11 issues. All other foreign: $98.95 US Funds per OSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS year, 11 issues. Single copy: $10.00. OD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY liquidHINGES tight HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES M G MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL fittings in PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SC From time to time we make our subscription list nylon ties WASHERS WRAPS ADAPTER AEROSPA EEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES cable WALL PLUGS elevator available to select companies and organizations round spacers seal RICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS C equipment whose product or service may interest you. If you in lighted TPE feet bagsFURNITURE GLIDES GOVERNMENT GRO FASTENERS FEET FITTINGS FLANGES FOODmoney PROCESSING do not wish your contact information to be made VERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS under ES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC sign INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS in bank available, please contact us via one of the followOKS OFFICE EQUIPMENT PHARMACEUTICAL microwave PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CU ing methods ... acrylic RTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALL on ELBOWS EL Phone: 1-800-268-7742; Fax: 416-510-5130; XES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAYcubes DOWELS Gripmaster sculpture Email: privacyofficer@bizinfogroup.ca ECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS H strain reliefs in lobbyPIPES PLUGS AC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL Mail to: Privacy Officer, Business Information for electrical REWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIE Group, 12 Concorde Place, Suite 800, Toronto, cabling UGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES ON. M3C 4J2.

NDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCES

Editorial Purpose: Canadian Industrial Equipment RE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFA News provides the answers to increased produc- ODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVI tion, efficiency and profit by keeping our readers HERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQ nylon informed of the latest technological advances in PLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES products, components and maintenance materials, SPLAY DOWELSwashers ELBOWS in ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWA air offering the competitive edge in today’s market. DUSTRY HINGESconditioners HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFIC

ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOG

Canadian Industrial Equipment News (ISSN 0319OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE 5902) is published 11 times a year by Business AMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS Information Group, L.P., a leading Canadian inNGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE bumpers HVAC INSULATORS KN formation company with interests in business-toMARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS on officeROBOTICS business information services. S SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRA drawers “Printed in Canada. All rights reserved. The con- ROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTOR tents of this publication may not be reproduced UPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVE either in part or in full without the consent of the OMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING copyright owner.” TS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STAND

ON CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AU

The contents of this magazine are protected by LLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWE copyright and may be used only for your personal Salut à tous nos clients au Québec! Where will you find Cords next...? ECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES non-commercial purposes. All other rights are reOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL served and commercial use is prohibited. To make UGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TUR use of any of this material you must first obtain the permission of the owner of the copyright. For WIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS further information please contact Olga Mar- RES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FL OCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE kovich at 416-510-5113.

À Montréal, au Canada, wherever – there’s a little piece of Cords.

NUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREW

Publications Mail Agreement No. 40069240. Return undeliverable Canadian Addresses to Circulation Dept. — Canadian Industrial Equipment News, 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2. CIEN, USPS 761-830 is published monthly by Business Information Group. US office of publication: 2424 Niagara Falls Blvd, Niagara Falls, NY 14304-0357. Periodicals Postage Paid at Niagara Falls, NY. US postmaster: Send address changes to Canadian Industrial Equipment News, PO Box 1118, Niagara Falls, NY 14304. Printed in Canada. USPS 761-830

EEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPA

RICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS C

VERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GRO ES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS

8 of the millions of solutions found in Montreal

OKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CU

RTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALL

XES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS EL

ECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS H

AC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS

REWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIE

UGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES

NDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCES

RE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFA

ODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVI

ISSN 0319-5902

Member, Canadian Business Press

HERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQ PLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES

SPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWA

DUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFIC

ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOG

Cords Canada Ltd. Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 NGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KN www.cordscanada.com MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE

AMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS

S SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRA CIRCLE NO. 102 ON READER REPLY CARD

ROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTOR


new products

february 2009 www.cienmagazine.com

DC GEARMOTORS

The new series of fractional horsepower DC gearmotors features right angle worm gearing. Designed to also function as Von Weise Drop-In Replacements, the VWDIR23 gearmotors are available in 6 standard 90 volt DC input models. With gear ratios from 37:1 to 525:1, corresponding fixed output speeds range from 90 to 3rpm, and output torques from 34 to 250 in-lbs (3.8 to 28.3 N-m). These drop-in replacements for VW23 and VW33 gearmotors feature 1/10 or 1/20 hp (75 or 150 watt) permanent magnet DC motors with replaceable brushes, grease lubrication for long life and all-position mounting, with left, right or dual output shafts with a 100 lb (45.4kg) overhung load rating. Bison Gear & Engineering Corp. CIRCLE NO. 76 ON READER REPLY CARD

PRESSURE COMPENSATION

It has become important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation. When this occurs, the risk of dust and humidity being absorbed into the control panel increases dramatically. The DA084 series has a high degree of protection and has a NEMA 3 (IP45) rating. The easily installed, specially designed pressure compensation plug DA084 permits a controlled change in pressure. The DA084’s material is plastic according to UL94 V-0 and this series comes with an operator’s manual. The product is suitable for automotive and petroleum industries. OMEGA

WINTER TRACTION AIDS

The Due North Winter Traction Aids are lightweight and fit over the footwear that people already own and feel comfortable in. They use longer lasting replaceable spikes made of tungsten carbide for superior traction on ice and snow. They are non-sparking and do not “round off” as they wear. Dentec Safety Specialists CIRCLE NO. 23 ON READER REPLY CARD

CIRCLE NO. 21 ON READER REPLY CARD

CIRCLE NO. 103 ON READER REPLY CARD

ASSEMBLY COMPONENTS

Similar to LEGO blocks, Flexpipe assembly components enable companies to easily create custom workstations, carts, racks and any other devices that employee inventiveness can produce. The Flexpipe modular system is made up of resin-coated steel tubes, steel connectors, conveyor rails and wheels and various accessories that can easily be assembled with a simple hex key. The system is simple, flexible, multifunctional, safe and reusable. Martins Industries CIRCLE NO. 22 ON READER REPLY CARD

ADJUSTABLE AIR AMPLIFIER

EXAIR’s new 3” Adjustable Air Amplifier offers a simple way to move high volumes of air to cool, vent, exhaust and dry. The airflow can be easily adjusted from a “blast” to a “breeze” to match the application requirements. There are no impellers or moving parts to wear out. Applications include cooling hot parts, exhausting smoke and fumes, distributing heat in ovens or molds, and drying components. Construction is aluminum or stainless steel. EXAIR Corporation CIRCLE NO. 24 ON READER REPLY CARD

On the cover ... PANEL ENCLOSURE

Rittal offers a stainless steel enclosure solution comprising Premium Panel enclosure, together with TFT and IP rated keyboard that meet the strict hygiene requirements of the food and beverage process industry. Available in 304 grade stainless steel, with keyboard select, the Premium enclosure, with protection category IP69K, is available in four sizes, capable of integrating 15” to 17” monitors and control panels. The enclosure can also be mounted top or bottom onto support arm systems such as the stainless steel CP-S system. Monitors can be integrated into the enclosure, either LCD or TFT, with resistive touch screen and brightness of 250cd/m2. Input devices such as the Rittal IP69K rated stainless steel keyboard can also be mounted into the keyboard section to provide a maintenance free and vandal proof keyboard, based on piezo technology with 105 keys and USB connection.

Rittal Systems Limited CIRCLE NO. 13 ON READER REPLY CARD CIRCLE NO. 104 ON READER REPLY CARD


Advertisement

Three New Toggle Clamps Offer Safety Locks Carr Lane has introduced a variety of new toggle accidentally opened by bumping the handle. clamps with safety locks. Carr Lane offers a toggle clamp for just about • Latch-action toggle clamps are available in every application. These versatile clamps offer five sizes, from 360 to7500 lbs holding capacity, fast, easy workholding. Carr Lane’s complete with a threaded U bolt for adjustability and a toggle clamp line includes horizontal and vertical matching latch plate. handle hold-down clamps, push/pull models, latch-action clamps, toggle pliers and air-powered • Vertical-handle toggle clamps are available in clamps. All Carr Lane toggle clamps have a comthree sizes, from 150 to 500 lbs holding capacity. fortable handle grip, and are made of durable These compact hold-down clamps have a unique high-grade steel (also available in stainless steel). finger-grip T handle and an open arm that provides All are available in a range of sizes and holding adjustable spindle location. capacities. • Horizontal-handle toggle clamps are avail- New latch-action, vertical-handle and horiMini sizes and clamps for heavy-duty applicaable in two sizes, from 500 to 750 lbs holding zontal-handle toggle clamps, all with tions are other options, as well as straight or capacity. These low-profile hold-down clamps also optional safety locks, from Carr Lane. flanged bases and open or solid arms. have an open arm that provides adjustable spindle Send for a catalog at Carr Lane Mfg. Co., location. 4200 Carr Lane Ct., St. Louis, MO 63119 or visit the online catalog at All three types are available with an optional safety lock that automatically carrlane.com. engages when the clamp is closed, then remains locked until manually disengaged by pushing a lever before opening. This prevents the clamp from being CIRCLE NO. 105 ON READER REPLY CARD

MORE THAN 100,000 COMPONENTS, CAD DRAWINGS AND MORE! CARRLANE.COM IS PRODUCT CENTRAL. TOOLING COMPONENTS, CLAMPS

Carr Lane’s 680-page catalog contains alignment pins, plungers, handles and knobs, locators, supports, tooling plates and blocks, jig and fixture bases, and more. Full sections on chuck jaws, drill jig bushings, toggle clamps, modular fixturing, and power workholding. Send for a copy, or view it online. Carr Lane Mfg. Co., www.carrlane.com. CIRCLE NO. 106 ON READER REPLY CARD

Quick Release Pins. Searching for quick alignment? Carr Lane’s variety of quality pins speeds up manufacturing and assembly. Several models, including the ball lock mounting system, feature locking action for both locating and clamping. Carr Lane Mfg. Co., www.carrlane.com

DRILL JIG BUSHINGS

Carr Lane offers a huge selection of drill jig bushings, representing more than 60 illustrated pages in the company’s catalog, with most available in metric as well as U.S. sizes. Precision honed and ground, all Carr Lane bushings exceed ANSI standards. Unground bushings are available for oversize holes. Carr Lane Mfg. Co., www.carrlane.com.

Toggle Clamps. Need to get a grip? Toggle clamps can make it happen. Choose from hold-down, push/pull and latch-action types. New options offer built-in safety locks. Carr Lane Mfg. Co., www.carrlane.com

CIRCLE NO. 107 ON READER REPLY CARD

Save time, and turn to CarrLane.com for the online catalog with the widest variety of products you need. Carr Lane provides more than 100,000 products for OEM design, tooling and workholding. In addition to English, now our online catalog is available in French, Spanish, German and Italian. So visit Product Central, and see the online catalog at CarrLane.com.

Carr Lane offers standard components to help you increase quality and productivity. HARD & SOFT CHUCK JAWS

Hard and soft chuck jaws are available from Carr Lane, with hundreds of jaws in popular sizes for dozens of chuck brands, in steel, cast iron or aluminum versions. Hard jaws are available in two-step reversible and single-step reversible varieties. Soft jaws are available pointed, square nosed and as pie jaws®.

Adjustable Locking Hubs. In sturdy stainless steel or lightweight plastic, the hub is a rotary bearing that provides positive locking at any 10° or 15° increment. Use when a design requires adjusting, reclining or folding.

ISO 9001-2000

Carr Lane Mfg. Co., www.carrlane.com

Carr Lane Mfg. Co., www.carrlane.com. CIRCLE NO. 108 ON READER REPLY CARD

CIRCLE NO. 109 ON READER REPLY CARD

CERTIFIED


new products

february 2009 www.cienmagazine.com

ELECTRICAL INSULATING FLUIDS

Petro-Canada announces that their LUMINOL TR and TRi electrical insulating fluids meet the new Type III and Type IV special requirements introduced by the Canadian Standards Association (CSA). The new requirements were created to ensure that electrical insulating fluids perform under the increasing demand put on today’s HVDC and shell-type power transformers, free-breathing transformers operating under overload conditions and reactors. Petro-Canada CIRCLE NO. 25 ON READER REPLY CARD

PORTABLE PRINTER HEX HEAD SCREW COVERS

These Hex Head Screw Covers are manufactured in black high density polyethylene 6/6. They provide a snug, protective, concealed finish to metal hexagon nut and screw heads. The hex head screw covers are available in two separate styles: a round ID for M6 pan or hex head machine screws, or a hex ID for M8 hex nuts and screws. Micro Plastics CIRCLE NO. 28 ON READER REPLY CARD

Designed for harsh outdoor environments, the Andes 3 three-inch printer is IP54 certified and is able to withstand adverse weather conditions and drops to concrete without diminished performance. Its Form Fiesta – a Windows based page printing utility – provides an array of design functions to prepare visually pleasing and informative forms that include test, barcodes and tables. The Andes 3 unit features a highly integrated 32 bit microcontroller and incorporates 4 MB flash and 1 MB SRAM memory that is under user control. The lightweight printer boasts an in-field programmable CPU containing firmware, resident fonts, rotated fonts, downloadable fonts, graphics, multiple logos and bar codes. Extech Data Systems CIRCLE NO. 30 ON READER REPLY CARD

VARIABLE FREQUENCY DRIVES

The Variflex2 RVEF Series variable frequency drives are ideal for general purpose motor applications from 0.25 to 3.0 HP motors and offer features and options that are usually only available on larger drives. The Variflex2 Series is a reliable range of drives that are easy to use and setup either via their front touch pad or simple and intuitive PC software tool. The Series is available in two frame sizes, covering main supply voltages (110/230 VAC single phase or 230/480VAC three phase). Internal thermal management has been optimized to allow side by side installation without any performance derating in temperatures up to +50°C. Carlo Gavazzi (Canada) Inc. CIRCLE NO. 26 ON READER REPLY CARD

VOLT-OHM METER

The Simpson new 260-9S Volt-ohm meter is identified as an industrial safety VOM and is rated for Category III – 600 V applications. techniCAL Systems 2002 Inc. CIRCLE NO. 27 ON READER REPLY CARD

EPOXY POTTING SYSTEMS

The CONAP® Epoxy Potting Systems extend the life cycle of devices in electrical and electronic designs, such as coils, controls, sensors and transformers. All three products provide an ambient cure and have excellent storage stability. Each is formulated with a non-abrasive filler to reduce wear on machine metering/dispensing equipment. CONAPOXY FR1810 is an 80 Shore D flexible two-component, low exotherm, flame retardant, long-life epoxy potting and casting system with excellent handling properties. It is well suited for protecting electronic modules, components, and electrical devices from thermal shock. A fast gellation epoxy, CONAPOXY FR-1820 is for designs requiring fast line speed potting of electronic modules, components and electrical devices. The CONAPOXY FR1830’s mixed viscosity of 2,100 cps at 25°C has excellent release of entrapped air characteristics. Cytec Industries Inc. CIRCLE NO. 77 ON READER REPLY CARD

MASS FLOW METER

The Air-Trak™ Model 628S is specifically designed to measure engine air intake mass flow rate. The meter uses Fast-Flo Sensor Technology® for an extremely fast, 200 millisecond response-time making it ideal for the toughest transient test cycles. The versatile microprocessor-based instrument integrates the functions of flow-range adjustment, meter validation and diagnostics encased in a probe-mounted NEMA 4X (IP65) housing. Mass flow rate and totalized flow, as well as other configuration variables, are displayed on the meter’s 2 x 12 backlit LCD panel. Sierra Instruments CIRCLE NO. 33 ON READER REPLY CARD

LEAK DETECTOR

LINEAR ACTUATOR ROTARY ENCODER

Balluff’s new BML S2E rotary encoder provides a new level of positional information for applications such as conveyors, speed control and angle measurement. Its basic design consists of a magneticallyencoded ring and a non-contact sensor head. This assembly installs easily and provides a quadrature outlet at up to 46,000 pulses per revolution. An available mounting hub allows its magnet ring to be adapted to a wide range of applications. The 2SE provides accurate velocity and position tracking of virtually any rotary movement to monitor continuous and/or oscillating rotary shaft motion. It provides continuous feedback allowing PLC-directed set points and electronic cams to be established to make the operation of the host machine more flexible. Balluff

The 35000 series (Size 14) double stack captive hybrid linear actuator is designed with an internal anti-rotation mechanism and is specially well suited for applications in which external anti-rotation methods would be difficult or impossible to employ. The size 14 double stack hybrid linear actuator features engineering thermoplastics in the rotor drive nut and a stainless steel Acme lead screw. Typical applications include medical equipment, semiconductor handling, valve control, X-Y tables, hand-held instruments, telecommunications, or wherever precise linear or rapid motion is required. Haydon Switch & Instrument, Inc.

On the cover ...

LED BULBS

MULTI CONNECTION SYSTEM

CIRCLE NO. 78 ON READER REPLY CARD

CIRCLE NO. 34 ON READER REPLY CARD

CIRCLE NO, 31 ON READER REPLY CARD

CIRCLE NO. 29 ON READER REPLY CARD

WAGO has extended the pole configurations for the insulated comb-style jumper bars used with the 231 Series Multi Connection System (MCS) MIDI (pin spacing 5mm/5.08mm). In addition to a 2-pole configuration, 3-, 5-, 7- and 10-pole versions have joined this MCS MIDI lineup to provide additional flexibility. The jumpers have been specifically designed for CAGE CLAMP® compatibility. With the MCS jumpers, just one connection system is needed. The jumpers also feature an insulated, touch-safe design for safety, on-unit molded markings for easy identification and quick installation, removable jumper pins for custom configurations and suitability for both a 5mm and 5.08 mm pitch. The RoHS-compliant MCS MIDI jumpers are also Spring Pressure-compatible. Additionally, all versions within the wide range of MCS MIDI jumpers are available from stock. WAGO Corporation

The ThermaCAMAE GasFindIR CO™ detects carbon monoxide that is created during a variety of industrial processes. GasFindIR can scan wide areas from a distance to quickly identify the emission at its source allowing for improved worker safety and greater efficiencies. These three user-selectable integration modes, Normal Scene, Cold Scene, and Hot Scene can be selected at 60 Hz. GasFindIR CO has an advanced cooled InSb detector and optical systems that are tuned to very narrow spectral infrared images for detection of very small leaks that can easily go unidentified with other detection devices. FLIR Systems, Inc.

HALF-HEX THREADED INSERTS

New Atlas® SpinTite® stainless steel half-hex shank threaded inserts provide corrosion resistance and ideal hardware fastening solutions for “blind” attachment applications where only one side of a panel is accessible for assembly. Their hex body design for installation in hex holes promotes high resistance to rotation and a low-profile head minimizes protrusions. These stainless threaded inserts provide practical alternatives to tapped holes, weld nuts, rivets, and self-drilling or tapping screws and can enable close-to-edge mounting. PennEngineering® CIRCLE NO. 32 ON READER REPLY CARD

The PAR30 LED spotlight bulb is made up of five three-Watt high-power LEDs. They are direct incandescent PAR30 replacements, combining advanced Light Emitting Diode (LED) technologies, standard 25mm Edison screw-in bases, and light optimizing designs producing 480 to 544 lumens of vivid light depending on the bulb model. PAR30 LED bulbs are available in a 40° light-emitting viewing angle, running on 80V to 260V AC current. The high-power white LEDs feature a low power draw, high shock/vibration resistance and last up to 50,000 continuous hours. PAR30 LED lamps are available in colour temperatures of 300Kelvin Warm White and 5000Kelvin Pure White.

LEDtronics, Inc.

CIRCLE NO. 14 ON READER REPLY CARD


Je][j^[h" m[ YWd ^cXgZVhZ egdYjXi^dc i^bZ! gZYjXZ Ydlci^bZ! VcY bV`Z ^i ]dbZ [dg Y^ccZgi^bZ# >iÉh i^bZ id ^cXgZVhZ ndjg [VXidgnÉh egdYjXi^k^in VcY egdÒiVW^a^in! cdi id bZci^dc! i]Z egdWVW^a^in d[ \Zii^c\ ]dbZ Wn +eb# L^i] EVg`ZgÉh Xjii^c\"ZY\Z fd[kcWj_Y WdZ [b[Yjhec[Y^Wd_YWb j[Y^debe]_[i" XdbW^cZY l^i] i]Z ldgaYÉh bdhi ZmiZch^kZ a^cZ d[ cej_ed WdZ Yedjheb iebkj_edi" ndj XVc Wj^aY h^beaZg! bdgZ Z[ÒX^Zci bVX]^cZh# Hd egdYjXi^dc a^cZh bdkZ l^i] egZX^h^dc VcY heZZY! l]^aZ VYkVcXZY Y^V\cdhi^Xh ]Zae ^hdaViZ VcY gZeV^g egdWaZbh bdgZ fj^X`an# L]^X] d[ XdjghZ! aZVkZh ndj VbeaZ i^bZ id \Zi ]dbZ [dg ndjg [Vkdg^iZ bZVa# HdjcY \ddY4 K^h^i i]Z cZl eVg`Zg#Xdb [dg bdgZ ^c[dgbVi^dc#

lll#eVg`Zg#Xdb & -%% 8"EVg`Zg CIRCLE NO. 110 ON READER REPLY CARD


focus on ... electrical/electronics

february 2009 www.cienmagazine.com

LISTA COMPLETES THE CIRCUIT with durable, attractive ESD workstation

A

utomated Circuit Design provides OEMs in the electronics industry with a complete spectrum of post-engineering printed circuit board (PCB) assembly, design and testing solutions. A large PCB Design Service Bureau, ACD is an all-in-one-source for PCB design, PCB fabrication, PCB prototype and production assembly, box-build assembly, PCA testing, functional testing and component procurement. Production Manager Bob Smith is responsible for keeping things flowing smoothly on the production floor and meeting day-to-day scheduling demands, which can often include some potentially stress-inducing quick turnarounds and deadlines. However, there was one fairly substantial bump in the road. One night, fire broke out from an electrical box within the ACD complex. No one was injured, but much of the company’s operations equipment was destroyed by smoke and water damage. While the company was temporarily relocated to a nearby location, the original 15,000 square foot facility was renovated and new equipment was purchased and installed. ACD replaced the company’s older workstations with about 50 Arlink® 8000 Modular Workstations. Produced by Lista International Corp., a leading manufacturer of modular workstations and storage solutions, the Arlink 8000 had the quality, flexibility and durability that Smith and the ACD applications needed. Smith was impressed with the overall quality of the Lista products and the Arlink workstation, placing particular emphasis on the workstation’s structural support, sturdiness and heavy gauge metal. “With the Arlink 8000 workstations,” Smith said, “we knew we were getting durable workstations that could meet all of our needs today and well into the future. There have been no limitations with the Arlink 8000.” Ideal for a wide variety of applications, including assembly, computing environments, service, repair, research and technical work, Lista’s Arlink 8000 workstations can be configured in a variety of heights and

ELECTRICAL CONNECTORS

By redesigning its time-saving Liquidtight ST Series of cable and conduit connectors, Appleton is targeting OEM and harsh industrial applications that require electrical connections be protected from water, dust, oil, grease, fumes and other hostile contaminants. Now available pre-assembled with an integrated KO sealing ring, the connectors are suitable for machine shop equipment, conveyors, material handling equipment, packaging, pumps and motors. Bar stock steel or malleable iron construction offers long-lasting performance. EGS Electrical Group CIRCLE NO. 79 ON READER REPLY CARD

LED RECHARGEABLE LIGHTS

Boasting up to 18,000 candela (peak beam intensity) and 140 lumens measured system output, the Stinger® LED and Stinger® DS™ LED rechargeable flashlights provide extraordinary brightness and durability with new power C4™ LED technology. They are suitable for virtually any job, from replacing a small machine part to more general uses such as lighting up areas of a shop floor. Both LEDs are constructed of machined 6000-series aircraft aluminum and feature a non-slip rubberized comfort grip with anti-roll rubber ring. Both provide high brightness for up to 1.75 hours of continuous runtime, up to 3.5 hours continuous hours at medium brightness and up to 6.75 continuous hours at low brightness. The strobe feature operates for up to 5.50 continuous hours. Streamlight, Inc. CIRCLE NO. 80 ON READER REPLY CARD

lengths to best suit specific needs. At ACD, the Arlink workstations deliver the flexibility to perform in three unique departments: the kitting stockroom where kitting materials arrive and are subsequently distributed; the production floor, and the test department. A principle caveat for ACD’s workstation procurement was that the workstations needed to offer both exceptional functionality and ESD protection. ”All the workstations are electro-static dissipative,” said Smith. “So they are an ideal solution for every department. In the kitting area, technicians can safely work with electrostatic components. And in the assembly and production departments, every technician can perform the most precise processes effectively. The Arlink 8000 provides the lighting needed to perform every task with attention to every detail. Additionally, its substantial shelving space offers the space needed to set up stations for testing completed products.” The Arlink 8000 provides ACD with a modular solution that can meet a wide variety of needs. Available in five industry-standard widths and five different heights up to 84”, the Arlink 8000 also features a unique “starter and adder” system, with the option of back-to-back configurations and mobility. This level of flexibility enables

DIGITAL OUTPUT BOARDS

The Guardian™ DNA/DNR-DIO-432 and –433 industrial digital output boards are designed for use with UEI’s Ethernet Cube family — PowerDNA, UEIPAC, UEILogger and Modbus “Cubes”. The DNR models are designed for UEI’s new 12-slot rack-mounted RACKtangle I/O chassis. Each board provides 32 channels of digital output — up to 600 mA perchannel continuous current with an output voltage drop of less than 550 mV. The –432 version outputs are configured as current sources; the –433 as current sinks. The output ports are configured as single 32-bit words, the maximum output throughput rate is 1 kS/s, and the boards have an operating range of 3.3 to 36 VDC. United Electronics Industries CIRCLE NO. 90 ON READER REPLY CARD

ELECTRIC ACTUATORS

New Valvcon ADC Low Temperature Actuators offer the torque and reliability of the Valvcon ADC platform combined with ultra low current draw electronics and battery back-up capability for power loss situations. They are suitable for remote solar powered installations and are also well suited for on/off duty and proportional applications where extreme cold temperatures exist. These rugged, compact, quarter-turn electric actuators have been designed for use in the coldest and most remote environments. Their operating temperature range extends down to –40°F without the need for an internal heater. Metso Automation CIRCLE NO. 91 ON READER REPLY CARD

ACD to utilize layouts that exactly address each of the facility’s unique applications. Smith also views the workstation’s aesthetic appeal as a big plus for ACD. He said, “We all take great pride in the appearance of our production floor, as we often have customers touring the facility. A uniform look of consistent quality is essential for echoing ACD’s well-earned image of quality and attention to detail. Customers often compliment us on the aesthetics of our production areas, and the workstations contribute a lot to that.” Today, equipment procurement at ACD is driven not by urgent needs (as it was with the fire) but by increased demand and sales growth. Given Smith’s complete satisfaction with the Lista workstations, the Arlink 8000 remains the go-to option to fulfill his production needs. ”With our recent expansion of adding an additional 11,000 square feet to our facility, we have substantially added to the number of workstations in our facility. The Lista sales team has always been very responsive to our needs and their products deliver everything we need.” Lista International Corporation CIRCLE NO. 35 ON READER REPLY CARD

OSCILLATORS

The XpressO™ LVPECL and LVDS oscillators with 2.5-volt operation enable operation at the same voltage as the silicon chips to which they are providing timing, resulting in less current and heat generation. The oscillators employ noise reducing DSM technology and low noise architecture, offering low levels of jitter and phase noise. This series is ideal for a variety of applications including SONET, Ethernet, storage area network, broadband access, microprocessors/DSP/FPGA, industrial controllers, test and measurement equipment, fiber channel and portable applications requiring low power usage. The oscillators feature application specific integrated circuits (ASICs) for accurate performance and increased flexibility. Fox Electronics CIRCLE NO. 92 ON READER REPLY CARD

MULTI-RANGE DC SUPPLY

The Model 9110 100W 60V/5A MultiRange DC Power Supply automatically recalculates the voltage/current limits for each setting and provides 100W output power in any Volt/Amp combination with the rated voltage (60V) and current (5A) limits. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required. Features include: digitally controlled, mixed mode linear/switching DC power supply, bright easy-to-read display and low ripple and noise. B&K Precision Corporation CIRCLE NO. 93 ON READER REPLY CARD

MEASUREMENT MODULE

WAGO’s 750-493 3-Phase Power Measurement Module integrates comprehensive monitoring of a power supply network with the connectivity of an I/O system. At just 12mm wide, the highdensity, 6-channel 750-493 represents a space-effective solution to power system supply management. Since the module is a component of a remote I/O or distributed control system, it is compatible with 16 different fieldbus networks (including Ethernet, Profibus, Modbus, and DeviceNet) and the 300+ digital, analog, and special function modules found in the WAGO-I/O-SYSTEM, making it flexible and efficient to analyze and distribute power supply data. When one or more 750-493 modules are connected to a WAGO controller, the solution can be programmed with WAGO-I/O-PRO CAA for data logging, time stamping and historical analysis. Because the DIN-rail mountable 750-493 was designed as an I/ O system component, much of the complexity associated with traditional modules has been minimized. There is no need for power feeds, additional networking and special mounting. WAGO Corporation CIRCLE NO. 94 ON READER REPLY CARD


focus on ... electrical/electronics

CURRENT & VOLTAGE CALIBRATOR

CONTINUOUS FLEX CABLES

igus® now offers a full line of Chainflex® continuous-flex cables for bus systems, including a cable specifically designed for USB applications. This cable is ideal for industrial environments requiring a USB 2.0 connection and provides fast, reliable data transmissions up to 16.4 feet. Chainflex USB cables feature a pressure-extruded, flame-retardant. TPE-blend outer jacket for extended service life to millions of cycles. They boost a minimum bend radius of 12.5 times the outer cable diameter and operate within a permissible temperature range of –31°F to +158°F. With an overall shield for increased EMI protection, Chainflex USB cables are unaffected by high-noise, industrial environments where crosstalk can be a problem. igus® Inc.

The pocket-size Model CSG Current and Voltage Calibrator is an ideal tool for troubleshooting transmitters, transducers, motors and actuators. It generates a 0 to 10 VDC signal in increments of 1 volt or a 4 to 20 mA signal in increments of 1 mA. The ramp interval timing function allows user to define maximum and minimum values. An easy to read LCD screen with a blue backlight allows for use in dimly lit areas. The CSG also features an auto shut-off timer from 1 to 20 minutes. The ambient operating temperature for the Model CSG is 0 to 50°C making it useful in various applications. Dwyer Instruments, Inc. CIRCLE NO. 39 ON READER REPLY CARD

www.cienmagazine.com february 2009

CABLES

Alpha Wire offers a variety of cables approved by UL as Wind Turbine Tray Cable. These cables will feature a 1000volt rating with an operating temperature range of –50°C up to 200°C, depending on the specific materials used. The cables are well suited to applications involving power distribution, control and monitoring within the wind turbine. They are available in a range of different insulation and jacket materials, a variety of shielding options as well as optional approvals: sunlight resistance, oil-resistance and FT-4 or IEEE 1202 flame resistance. Alpha Wire Company CIRCLE NO. 40 ON READER REPLY CARD

CIRCLE NO. 36 ON READER REPLY CARD

WORKGROUP ANALYZER

The OptiView Series III Workgroup Analyzer is an “always-on” solution that identifies every device, application, and connection on the network, making it easy for users to quickly see performance problems, identify the cause and solve the problem. The Workgroup Analyzer addresses the issue of maintaining network performance even as new technologies and new services require infrastructure changes at central and remote locations. By providing flexibility in network analysis and troubleshooting, the Workgroup Analyzer helps network managers maintain performance in changing environments. Located centrally, multiple users can access the Workgroup Analyzer at the same time. Fluke Networks CIRCLE NO. 37 ON READER REPLY CARD

LED ENGINEERING KIT

The new LED Engineering Kit is a powerful tool for testing LEDs with various accessories and applications while gaining practical knowledge of LED lighting. The new kit includes an OSRAM OSTAR high-power LED and components from various LED Light for You (LLFY) partners to include several lenses and reflectors, a power supply, a thermal interface material and a selection of heat sinks. OSRAM Opto Semiconductors CIRCLE NO. 38 ON READER REPLY CARD

CIRCLE NO. 111 ON READER REPLY CARD

MASTER DISCONNECT SWITCH

The High-Amp DP Master Disconnect Switch can handle 125A (each pole), at up to 36 V DC and is engineered for use in a variety of vehicle applications. It can be used in two ways; first, because it is a DC switch it may control two independent circuits. Due to the switches capacity, this single switch handles a job meant for two, thus offering a solution to controlling large motors. Secondly, this switch is capable of switching one load, but disconnects two parts of the same circuit. This totally shuts down the load circuitry and gives the users a completely safe disconnect. Cole Hersee Company CIRCLE NO. 41 ON READER REPLY CARD


10

february 2009 www.cienmagazine.com

focus on ... electrical/electronics

FIBER OPTIC CABLE keeps steel fabrication flowing

T

he production of building systems has become increasingly sophisticated and customer driven in recent years, incorporating integrated data communications and dynamic manufacturing systems to meet demands for timely and customized deliveries. New Millennium Building Systems seeks to not only achieve those standards but also to gain a competitive advantage by continually raising customer expectations to a level that is difficult for rival suppliers to reach. This entails offering the right variety of products and maintaining agility in production processes so that customers know they can depend on quality and scheduled deliveries. New Millennium, a wholly owned subsidiary of conglomerate Steel Dynamics, Inc. manufactures a range of steel joists, girders, and decking for non-residential construction projects. In 2006 Millennium purchased joist-maker John H. Hancock and decided to renovate and expand the newly acquired operation in order to improve customer service and increase competitive pricing, plus expand product and geographic coverage. Five manufacturing plants now share resources and coordinate efforts to be the most customer-oriented joist company serving North America. ”Our expansion program involved not only construction and renovation, but also system upgrades,” explains Ricky Gillenwater, IT Director at the Salem facility. “We recognized early on that this would depend on advanced capabilities in data communications, which in turn would require the right communications infrastructure — fiber optic cabling throughout all the structures in our complex.” To accomplish this, Gillenwater’s team contracted with Professional Network Services, Inc. (PNS), a full-service voice and data integration provider. PNS is a specialist in physical layer copper and fiber optic cabling, LANs and WANs, including wireless networking, PBX and other communications systems. ”As part of the renovation project, New Millennium wanted to upgrade its voice and data network,” explains Don Daniel, PNS Area Sales Manager and Executive Project Manager. “That included laying fiber optic on their campus to connect five manufacturing buildings with the main

Rugged fibre optic cabling cn easily handle installation stresses, as well as, environmental and mechanical stresses over time.

Cross section of the Optical Cable Corporation ruggedized cable

Optical Cable Corporation (OCC) provides high-speed data networking via rugged fiber-optic cabling that enables the sharing information and increases production capacity.

office facility, where the IT resources were based.” However, the expansion of manufacturing facilities absorbed the existing office

building, so a new one had to be built on the adjacent property. In the meantime, office facilities had to be housed in temporary modular structures. That meant

CONTACTOR

The KILOVAC LEV100 contactor offers hermetically sealed construction for intrinsically safe operation in explosive and harsh environments. Rated for 100A at 900 VDC, the contactor uses an inert gas in the contact chamber and an epoxy-sealed resin case to provide longterm reliability. Contacts will not oxidize or become contaminated even during long periods of non-operation. Isolation of 8 kVdc across the open contacts permits use for high-voltage isolation. The compact package, occupying only about four cubic inches, is not position sensitive to allow flexible application. The contactor is available in bottommount and side-mount configurations. Tyco Electronics CIRCLE NO. 50 ON READER REPLY CARD

LASER BARS

As part of its “BRILASI” research project, OSRAM has improved the performance parameters of laser bars (laser chips). The result is a new generation of laser bars for pumping of solid-state lasers and direct material processing. The main applications of these laser bars include pumping of solid-state lasers and direct material processing. In addition to laser bars with a wavelength of 910 to 980 nm that achieve an efficiency of 70% at 120W, OSRAM will produce laser bars with wavelengths of 808 nm and 880 nm which will deliver an efficiency of 62% at 120W. OSRAM Opto Semiconductors CIRCLE NO. 53 ON READER REPLY CARD

JUNCTION BOX ASSEMBLIES

ITT’s VEAM junction box contains a complete harnessing system, including terminal blocks, cables and electrical components for inter-vehicle connections as well as power and signal connections. The VEAM interconnects are also available in a wide range of shell sizes and contact arrangements for integrating power and signal connections, and are suitable for either standard or harsh environments. The junction box and its components are ideal for control switchboard connections between vehicles, tilting systems, CCTV equipment, inter-vehicle connections, power and signal connections, and motor supplies up to 660A. ITT Interconnect Solutions CIRCLE NO. 54 ON READER REPLY CARD

temporarily installing fiber optic cabling between those buildings and the manufacturing plants. ”That expedited the installation of our networks within the manufacturing sites,” Gillenwater says. “We were able to get our fiber backbones in and connect them with the copper connections to our TLC (Total Logistic Control) based computers and other devices. That way we hit the ground running.” Daniel saw no problem with the temporary fiber installation. His firm is a reseller of Optical Cable Corporation (OCC), which manufactures a broad line of cables and accessories and has distributors in Quebec and Vancouver. . By using OCC ruggedized fiber optic cable, PNS could easily handle installation stresses as well as environmental and mechanical stresses over time. The temporary fiber cable installation was easy to relocate to New Millennium’s new headquarters building once construction was completed. Now fiber cable runs from the main office to each of the plants and the satellite office. Each fiber optic branch acts like a main distribution hub in each of the manufacturing facilities. In the main production facility copper wires branch off the hub into different areas where they are connected to workstations and PCs supporting TLC programs. ”Running the fiber out there has given us the ability to report our production real time,” Gillenwater explains. “We also create bundle tags, bar code labels that are generated from the data that is pushed down to those machines from the main office. The network enables us to stay current with our inventory on hand and just gives us a better handle, from the office, on what’s going on in the plant.” Gillenwater adds that production is now scheduled out in the plant, and everything flows in line from there. Actual production data is reported back to the office. ”We are also pushing data down to the machines,” he says. “We are in the process of sending information to the machines so that they can actually function off that data rather than having to key in the data.” Gillenwater says that the new fiberbased approach to data communications is having a dramatic effect on business capabilities. He says that not only is production capacity improved, but so is turnaround. And that means a higher level of customer satisfaction. Optical Cable Corporation CIRCLE NO. 95 ON READER REPLY CARD

POWER RESISTOR

TT electronics IRC has developed a cylindrical surface mount power resistor with enhanced precision specifications. Designated the PPC Series, the component merges the high surge capability (up to 1500W for 1 millisecond) of IRC’s renowned CHP Series with enhanced operational precision from tight TCRs. The surface mount thick film power resistor with tolerances to 0.1% at TCRs of 25ppm/°C. The PPC Series resistor is ideal for those high power and pulse applications that cannot trade accuracy or stability for power dissipation. The PPC Series precision power resistor is ideal for power supply, industrial electronics and instrumentation applications. IRC, Inc. CIRCLE NO. 55 ON READER REPLY CARD


focus on ... electrical/electronics

www.cienmagazine.com february 2009

11

SPD MODULES PILOT LIGHT LINE DIFFERENTIAL SYSTEM

The Multilin L30 Line Differential System delivers current differential protection for high-speed, sub-transmission and distribution lines and cables. The L30 offers utilities sophisticated protection, comprehensive communications, embedded IEC 61850 process bus support and advanced metering and synchrophasor monitoring. The L30 is equipped with advanced sensitive and segregated line differential protection and a full suite of integrated back-up protection, making it suitable for medium voltage underground cables. With programmable logic to build custom control applications, the L30 delivers seamless communications and interoperability, eliminating the need for point-to-point wiring and auxiliary devices. GE Digital Energy

DDP has developed a 16mm pilot light and LED lamp to retrofit and replace common GE ET-16 sockets. Designated PowerLink® PL16 Pilot light, the LED light includes a solid-state bayonet-based LED lamp and rugged Lexan™ lens that resists high impact for reliable performance in most environments. The PL16 is designed to mount in a 16mm hole and features a thin, compact, insulating polyester housing for added protection in tight fitting spaces. Available in 24V, 48V or 120V designs, the PL 16 features premium-engineered thermoplastics that keep the light units running cool while providing a high light intensity. DDP CIRCLE NO. 44 ON READER REPLY CARD

SINGLE-PHASE UPS

The UniStar P series single-phase online Uninterruptible Power Supply (UPS) is now available in rack mounted designs for industrial, commercial and office environments. This true on-line double-conversion UPS is available in 6kVA models, to protect from outages and irregularities in incoming line voltages from 160 to 280 VA at 45 – 65 Hz. Up to four UniStar P modules can be installed in parallel for redundancy or additional capacity. The UniStar P is suitable for many industrial and process applications, as well as for servers and networks, telecommunications equipment, medical imaging equipment or any sensitive electronic devices. Staco Energy Products Company CIRCLE NO. 46 ON READER REPLY CARD

The Strikesorb Surge Protection Devices provide protection from over-voltage and other transient voltage activity for electronic automation and control equipment. The SPD modules are available in a variety of application-specific voltages and packaging configurations to protect highly sensitive equipment and electronics. The Strikesorb modules meet the demanding requirements of the international IEC 61643-1 standard and the recently (2007) revised UL-1449 (2nd edition) standard without the use of fuses. Because the Strikesorb modules have successfully passed 3-cycle testing at available short circuit currents of up to 85kA rms, they can be integrated within the panelboards, switchboards, switchgear, automation and motion control centers without conducting additional UL testing. Raycap Inc. CIRCLE NO. 48 ON READER REPLY CARD

CIRCLE NO. 42 ON READER REPLY CARD

EMERGENCY LIGHTING

Designed to compliment Siemens Scalance™ wireless LAN, SINEMA E (SIMATIC Network Manager Engineering) scalable software simplifies the task of installing and starting up a WLAN network. The software visually simulates signal coverage, data transmission rate, signal-to-noise ratio and access point overlapping of a wireless LAN network, while accounting for environmental conditions and device parameters. SINEMA E is available in three scalable licenses – Lean, Standard and Powerpack. Siemens Energy & Automation, Inc.

Luna Glow is an emergency lighting solution that doesn’t rely on main power or batteries, requires no testing or maintenance and is 100% failsafe. Offered in T12 or T8 sizes, Luna Glow’s translucent, tubular design slips easily over an existing fluorescent lamp. Held in place with provided end caps, it then “soaks up” energy from the powered lamp. When the lights go out – for whatever reason – Luna Glow immediately activates and provides its “stored” photoluminescent illumination for quick, safe and orderly evacuation. There is no wiring, tools, batteries or maintenance. Quick and easy installation and automatic activation make the units suitable for any enclosed area that may need to be evacuated in an emergency. Shat-R-Shield

CIRCLE NO. 43 ON READER REPLY CARD

CIRCLE NO. 45 ON READER REPLY CARD

WLAN SOFTWARE

INTERCONNECT SOLUTIONS

The Powerpole “T-Pak” features a twoway electrical splitter for one incoming circuit and two outgoing circuits. It is designed to work exclusively with the four position Powerpole Pak connectors. The unit effectively splits the current from one incoming circuit into two, outgoing circuits. It is made of high-impact and corrosion resistant black thermoplastic and comes preassembled for a 20A, 3phase AC configuration. Two mounting holes are provided to allow the unit to be mounted in any location. The “Y-Pak” allows for easy installation, connection and disconnection of electrical equipment and provides security in applications where shock and vibration may be severe. Anderson Power Products

INDUSTRIAL ETHERNET CABLES

Belden has expanded its comprehensive line of DataTuff Industrial Ethernet cables for industrial data networks and plant floor control. Belden Category 5e DataTuff Shielded Twisted Pair Continuous Flex cable –Product No. S17938A – is rated for use in continuous motion machinery, such as C-Track and festoon systems, as well as robotics frequently used in discrete manufacturing and automated assembly lines. Belden Category 5e DataTuff Shielded Twisted Pair cable – Product No. 7939A – features a flexible, stranded and shielded construction to resist machine and plant floor vibration, along with superior noise immunity. Belden

CIRCLE NO. 49 ON READER REPLY CARD CIRCLE NO. 47 ON READER REPLY CARD 4823 3.375 x 4.875:4823 3.375 x 4.875 1/22/09

9:47 AM

HOW TO SAVE TIME AND ELIMINATE WASTE IN ADHESIVE BONDING APPLICATIONS Contact Master Bond Today – We Have The Technical Expertise You Need EPOXIES • SILICONES • CYANOACRYLATES URETHANES • UV CURES • ANAEROBICS

Outstanding customer service ■ Widest selection – over 3,000 grades ■ One- and two-part systems ■ Available in small to large systems ■ Environmentally friendly ■ Manufactured to strictest quality control standards ■ Replacements for competitors’ discontinued products ■ Convenient, easy-to-use packaging

154 Hobart St., Hackensack, NJ 07601 Tel: 201-343-8983 ■ Fax: 201-343-2132

www.masterbond.com ■ main@masterbond.com CIRCLE NO. 112 ON READER REPLY CARD


12

focus on ... enclosures

february 2009 www.cienmagazine.com

COOLING SYSTEMS

ATR ENCLOSURES

MECHANICAL HYGROSTAT

Omega’s new series of Mechanical Hygrostat is designed to control the relative air humidity inside of enclosures. When connected to an enclosure heater, (dehumidifier), it will turn the heater on at the set humidity level in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion. The MFR012 has a high switching capacity and is DIN rail mountable. This CE compliant product can also be used to control cooling fans, warning lights or other devices. OMEGA

The complete line of 700 Series Air Transport Rack (ATR) rugged enclosures is engineered for maximum flexibility, durability and cooling in a range of harsh environment applications. The 700 Series ATRs are designed to protect a variety of commercial off-the-shelf (COTS) aircooled cards, extended temperature cards and conduction cooled military grade cards in a variety of deployed environments. Satisfying a variety of thermal challenges, the enclosure can be engineered with convection (714 Series), recirculating air (715 Series), conduction (716 Series) or air-over conduction (717 Series) cooling methods. For added flexibility, the 716 Series features configurable conducting walls to address challenging environmental diversities. The enclosures allow maximum flexibility in configuration of size, cooling and power requirements. Carlo Gavazzi Computing Solutions CIRCLE NO. 58 ON READER REPLY CARD

CIRCLE NO. 56 ON READER REPLY CARD

PURGE/PRESSURIZATION

The 6000 Series Purge Pressurization System comes with all Bebco family system features as standard, is user-configurable to satisfy particular applications, and can be used with enclosures up to 7.1 cu. M of volume. It is also universal certified to all applicable updated standards for both Gas and Dust hazardous atmospheres. This Type X/Ex px purge/pressurization system features an intuitive programming screen that allows the user to quickly and easily configure the system to meet their specific application needs, and to monitor the status of the system’s pressure, flow and operation. This eliminates the need for the user to specify all their application requirements at time of order. The 6000 series is a complete purging system that contains the controller, pneumatic, electrical I/O and programming interface housed in a durable type 4X, IP66-rated housing. Pepperl+Fuchs CIRCLE NO. 60 ON READER REPLY CARD

COOLED ENCLOSURE

Intertec introduces a passively cooled enclosure that exploits a novel phase-change material to maintain the temperature of electronics equipment at 10 degrees lower than peak ambient temperatures. Requiring no power supply to operate, this standard cooling enclosure has enough internal space to meet common application requirements, such as the pressure transmitters and process analyzers used on oil and gas pipelines running in environments with temperature swings. Intertec CIRCLE NO. 57 ON READER REPLY CARD

ENCLOSURE OPTION

Lenze-AC introduces Polycarbonate Plastic NEMA 4X (IP65) enclosures for the SMVector Inverter. It is suitable for industries such as food and beverage or chemical processing, where drives need to be protected against dust, dirt and the harmful effects of water and corrosion. The enclosure is intended for both indoor and outdoor use, is NEMA 4X (IP65) rated, corrosion and UV resistant and has an improved resistance to low temperature impact. Lenze – AC Tech CIRCLE NO. 59 ON READER REPLY CARD

Need accurate, up-to-date up to date power transmission suppliers & service

contact information? CALL US TODAY

(416) 510-6799 or 1-888-542-4321 We’ll put you in touch with the right people!

(Also Available - accurate contact & business information on equipment manufacturers, distributors, wholesalers and agents, transportation, and much more.)

WIFI ENCLOSURES

Belden announces the launch of Indoor and Outdoor WiFi enclosures designed to provide optimum security for the remote placement of the Belden Wireless Solution’s XtraThin Access Points (APs). The compact, aesthetically pleasing enclosures are robustly constructed to fully comply with the physical or climate-related requirements of indoor or outdoor AP installations. The enclosures are NEMA-rated and RoHS compliant. They provide protection against tampering, theft and environmental damage. Belden CIRCLE NO. 61 ON READER REPLY CARD

Vortex A/C™ cooling systems for electrical enclosures require only a compressed air supply to operate. It quickly installs on electrical control panels to maintain enclosure temperature within a range of 27°C to 32°C. The 5000 BTUH Vortex A/C model features dual vortex tube cooling units, each with its own reliable mechanical thermostat to provide two-stage levels of refrigeration. To conserve energy, the first stage offers 2500 BTUH cooling capacity and, if needed, a second stage activates to double the supply of refrigerated air to the enclosure. The “no downtime”, maintenance-free units incorporate vortex tube technology to convert filtered compressed air into a low pressure, refrigerated air stream distributed throughout the enclosure. Vortec – ITW Air Management CIRCLE NO. 62 ON READER REPLY CARD

WALL-MOUNT CABINET

The ACCESSPLUS® II Type 1 WallMount Cabinet is a double-hinged cabinet that pairs security and accessibility to provide sophisticated cable management for networking applications. It offers an increased load capacity, handling network equipment weighing from 250 to 500 lbs. and available in a variety of cabinet sizes. It features latch-free sides to permit flushmount installations in tight spaces and corners, and it provides easy one-person mounting to save time. Along with solid door models ACCESSPLUS II offers tinted safety glass door options – which deliver greater clarity and scratch resistance than plexiglass. Hoffman CIRCLE NO. 63 ON READER REPLY CARD

6-SLOT TCA SHELF

The Asis Perform Series 6-slot Advanced TCA shelf is specifically designed to highdensity systems. It provides space for 6 node ATCA blades in a 6U shelf making it well-suited for telecom and data communications products that require high availability, fault management, and realtime performance. Moreover, HUB functionality is already integrated in the standard shelf management boards. Asis CIRCLE NO. 64 ON READER REPLY CARD


Industrial Literature Reviews VIBRATORY SELECTION GUIDE

Presents Eriez’ complete vibratory product line in an easy-to-use manner, with a broad overview to help select the proper equipment. Eriez’ innovations provide for a large array of feeding and conveying equipment options. www.eriez.com Eriez

FREE CATALOGUE CIRCLE NO. 81

www.cienmagazine.com february 2009

MINIMIZE OVERSPRAY AND WASTE

New AutoJet® Model 1550 Modular Spray System from Spraying Systems Co. ensures accurate, precise placement of the liquid being sprayed to minimize waste and quality control problems. This easy-touse, compact system provides automatic on/off control of spray nozzles and is ideal for coating, lubricating and marking operations. www.spray.com Spraying Systems Co. FREE CATALOGUE CIRCLE NO. 82

13

BOKER’S FREE 2009 WASHER CATALOGUE

Boker’s FREE Washer Catalogue has over 23,000 non-standard sizes available with no tooling charges. Outside diameters of 0.080” to 5.140”, a wide range of IDs and thicknesses, and 2,000 material variations provide millions of possibilities. Materials include low-carbon sheet steel, five types of spring steel, stainless steel, aluminum, brass, copper, nickel, silver and non-metallics. ISO 9001:2000 registered. www.bokers.com/cien Boker’s Inc. FREE CATALOGUE CIRCLE NO. 83

VACUUM CUPS AND ACCESSORIES

New Vi-Cas catalogue features replacement vacuum cups for lifters, manipulators, pick-and-place systems, packaging, label applicators, and more. Thousands of styles and sizes are detailed in materials to suit any application. Custom cups quoted from customer-supplied drawings, or reverse engineering from customersupplied cups. Visit us at www.vi-cas.com Vi-Cas FREE CATALOGUE CIRCLE NO. 84

POWERFUL STATIC ELIMINATORS

EXAIR’s Super Ion Air Knife™ removes static electricity from webs, sheet stock and plastic surfaces where dust, tearing, jamming or hazardous shocks are a problem. The balanced laminar airflow of the Super Ion Air Knife effectively eliminates static at distances of up to 20 feet away. Production speeds, product quality and surface cleanliness can improve dramatically. www.exair.com EXAIR Corporation

TACTILE SURFACE PRESSURE INDICATING SENSOR

EXHAUST FANS, IMMEDIATE DELIVERY

Pressurex® reveals pressure distribution and magnitude between any two contacting or impacting surfaces. Pressurex® is a thin sensor film that instantaneously and permanently captures a pressure profile “snapshot” by virtue of its changing colour. Conceptually similar to Litmus paper, the colour Pressurex® turns is directly proportional to the amount of force applied. www.sensorprod.com Sensor Products Inc., USA

N.R. Murphy carries a large inventory of industrial Exhaust Fans in a vast range of sizes. The most popular designs, arrangements and sizes are fully built and ready to ship. When an unusual requirement turns up, they have the experience and manufacturing capacity to quickly modify or build a new fan. Free catalogue includes N.R. Murphy’s line of fans, specifications and guidelines. www.nrmurphy.com N.R. Murphy Ltd.

FREE CATALOGUE CIRCLE NO. 85

FREE CATALOGUE CIRCLE NO. 86

RedHat NEXT GENERATION VALVE CATALOGUE

LISTA INTERNATIONAL OFFERS NEW GENERAL STORAGE CATALOGUE

The RedHat Next Generation Valve line sets new industry standards for reliability and power consumption. With new power management technology and robust advanced electronics, the valve accepts both AC and DC voltages while improving performance. These valves are available with Class I, Division 2 approval. www.ascovalve.ca ASCO FREE CATALOGUE CIRCLE NO. 88

Lista International Corporation introduces its new, full-colour 124page General Storage Catalogue, featuring the most up-to-date information about Lista’s extensive range of storage systems and accessories, including details about Lista’s redesigned, exclusive suspension system. www.listaintl.com Lista International Corporation FREE CATALOGUE CIRCLE NO. 89

FREE CATALOGUE CIRCLE NO. 87

focus on ... enclosures

19” RACK-MOUNTED SYSTEM POWER DISTRIBUTION

The FirstLine® OC power distribution cabinet is customizable to fit virtually any application. It reduces installation time by providing maintenance bypass, branch circuit distribution and voltage transfor­ mation in a single cabinet. With up to 96 branch circuit breakers with or without main panel disconnect circuit breakers, the FirstLine® OC simplifies the instal­ lation, moving or changing of electrical equipment. UL 1778 listed, it is suitable for power distribution needs within data centers, industrial plants, commercial fa­ cilities, lighting applications, and more. Staco Energy Products Co. CIRCLE NO. 65 ON READER REPLY CARD

Rittal’s 19” rack­mounted system – Slim­ Box Vario – is a solution for small elec­ tronic enclosures. The enclosure has a space­saving design with integrated pow­ er supply and climate control functions. The Slim­Box Vario housings are 300 mm deep and designed for the installation of cPCI, cPCI Express, VME64x boards of 3U, 6U or rear I/O boards. Due to the horizontal arrangement of the equipment, twice the number of functional compon­ ents may be integrated on 1, 2, 3 or 4 U. Two slots per U are available at the front and rear. The housings contain a back­ plane for VME64x or cPCI. Optionally, housings can be customized using a range of standard components. Rittal Systems Limited CIRCLE NO. 66 ON READER REPLY CARD

AIR CONDITIONERS

The Profile Guardian Series DP33, DP43 & DP47 Panel Mounted Air Condition­ ers are designed to cool the interior of electronic cabinets. With capacities ran­ ging from 5,000 to 9,000 BTU/H, these NEMA 4/4X rated air conditioners are ideal for both indoor and outdoor appli­ cations where weather and corrosion re­ sistance is required. Epoxy­coated con­ denser coils and painted galvanized sheet metal in the Profile Guardian models al­ low them to be used in corrosive and other hostile environments. The NEMA 4X interface makes these models suitable for applications such as Food and Bever­ age processing plants. Kooltronic, Inc. CIRCLE NO. 67 ON READER REPLY CARD

FAN TRAY BLOWER

For design engineers looking for a com­ pact cooling solution for rack­mounted industrial enclosures and electronic equipment cabinets, Orion Fans has de­ veloped a dual fan tray blower assembly designed to mount directly into standard EIA 19” rack cabinets. Designated the OMB5200­120 Series, the fan tray as­ sembly delivers 340 cfm of directed air­ flow and features a cleanable/replaceable aluminum mesh filter. Knight Electronics CIRCLE NO. 68 ON READER REPLY CARD


14

new products

february 2009 www.cienmagazine.com

DUCT TAPE ENGINE TACHOMETER

When using the HT-6100 engine tachometer in combination with an Ono Sokki detector, rpm measurement can be performed on virtually any engine type. It is used for research and/or production measurement of rpm on gasoline and diesel engines (two and four cycle engines having from one to eight cylinders). The HT-6100 uses a large 5-digit LCD with backlight to display the actual rpm being captured and with a measurement range of 120 to 20,000 rpm. A large array of detectors and detection methods support measurement on various engine types. Ono Sokki Technology Inc.

Scapa 448 is a high tack duct tape for industrial maintenance and general purpose taping. This product is easily torn by hand and offers excellent bond strength to a wide variety of substrates including poly films. Scapa 448 performs consistently over a wide range of temperatures without “edge ooze” and will not twist or curl during application. The product can be used for taping metal ductwork, hanging poly sheeting, general purpose bundling and sealing, and in a variety of industrial maintenance applications requiring increased tensile strength and adhesion. Scapa North America CIRCLE NO. 71 ON READER REPLY CARD

ID READER SOFTWARE

With the new release 3.2, DataMan 100 fixed-mount ID readers can now simultaneously read up to 128 codes in a single field of view – even with mixed code types – opening up many new application possibilities. In addition to the new multicode feature for the DataMan 100 Series, release 3.2 provides improved performance on all DataMan models for QR codes having perspective distortion, especially with high-contrast labels. The 3.2 release also includes support for VeriCode® for customers who purchase a license key from Veritec, Inc. Cognex Corporation CIRCLE NO. 73 ON READER REPLY CARD

CIRCLE NO. 69 ON READER REPLY CARD

ROTARY LASERS

The family of self-leveling rotary lasers is built with a covered rotary head cage. DeWALT designed the head cage with multiple thin struts that surround the head in order to maintain durability and minimize blind spots. The DW078 and DW079 are designed with an automatic horizontal self-levelling system that provides accuracy at plus or minus 1/8” per 100’. Easy to read X and Y LED lights flash while the laser is levelling. Once the unit is level, a solid LED beam will appear. The DW074 is designed with an automatic horizontal self-levelling system that provides accuracy at plus or minus ¼” per 100’. DeWALT CIRCLE NO. 70 ON READER REPLY CARD

ELECTRONIC LATCHING VALVE

Clippard’s 2- and 3-way electronic latching valve features a small, compact design, quiet operation, a single moving element and more. A careful balance of forces – through the precise placement of a permanent magnet in the valve core – produces a bi-stable valve. A short pulse of current opens the valve, which “latches” open indefinitely after the current stops with no power required. A subsequent pulse of current in the opposite direction closes the valve. Various connector, mounting, voltage, port, orifice and seal options are available. Clippard Instrument Laboratory, Inc. CIRCLE NO. 72 ON READER RELY CARD

April 20-22, 2009 Health & Safety Canada 2009, IAPA, Metro Toronto Convention Centre, Toronto, ON 1-800-406-4272; (905) 614-4272; Fax: (905) 614-1414; e-mail: conference@iapa.ca; www.iapa.ca May 12-14, 2009 Advanced Manu­factu­ring Expo, Society of Manu­factu­ring Engineers (SME), Place Bonaventu­re, Montreal, Qu­ebec 888-322-7333; www.pmds.ca & www.simu­.ca May 12-14, 2009 Plant Maintenance & Design Engineering Show, Society of Manu­factu­ring Engineers, Place Bonaventu­re, Montreal, Qu­ebec 888322-7333; www.pmds.ca & www.simu­.ca

LINEAR ACTUATORS

The ELZex Modular Linear Actuator series meets ATEX 95 explosion area testing certification for caustic environments. The heavy-duty rodless design is belt-driven and features an anti-static HTD (High Torque Drive) belt. The design features stainless steel guide rods that work in conjunction with adjustable track rollers to maintain consistent contact with the stainless steel guide rods; thus, preventing potentially explosive electric arcing discharge. The modular linear actuators are available in a widerange of sizes. They can be easily modified in several ways to meet the client’s design requirements. Stroke-lengths up to several hundred feet are available. Additionally, the anti-static HTD belt is steel reinforced and minimizes backlash on reversal; the minimized backlash offers repeatability of +/-0,1mm. Nook Industries CIRCLE NO. 74 ON READER REPLY CARD

115-120

Au­tomation Direct . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

113

Bird-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

103

Blu­Co . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

105-109

Carr Lane. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

102

Cords Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

104

Hammond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

112

MasterBond. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

101

Omega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

110

Parker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

800-662-5021

114

Spraying Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

WWW.BIRD-X.COM/CIE

111

Thomas & Betts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

12/17/04

1:05 AM

Get Rid of Birds! SPIKES NEEDLE STRIPS

Index of Advertisers ADVERTISER

October 19-22, 2009 Canadian Manu­factu­ring Technology Show (CMTS), Society of Manu­factu­ring Engineers, Direct Energy Centre, Toronto, ON www.cmts.ca

300 N. Elizabeth St. • Dept. CIE Chicago, IL 60607 312-BAN-BIRD • FAX 312-226-2480

The Guard Family of circuit breakers features an electronic chip plus magnetic control to provide precise overload protection and allows the user to achieve the exact trip time that the application demands. The circuit breaker is suitable for a range of applications, including stationary and portable generators, telecom equipment, industrial machines, medical equipment, welding machines, controllers, elevators, transportation equipment, air conditioners and power tools. Its fastaction magnetic trip can resist any high inrush set-up, providing maximum short circuit protection. The circuit breakers feature stable electrical parts that are 100% sealed and insulated from variable environments and conditions like moisture, vibration, chemicals and dust. The Guard Family is available in 1 to 4 poles. Master Distributors

RS#

June 16-18, 2009 Western Manu­factu­ring Technology Show, Society of Manu­factu­ring Engineers, Northlands Park-AgriCom, Edmonton, Alberta 888-322-7333; www.wmts.ca

ITH

CIRCUIT BREAKER

CIRCLE NO. 76 ON READER REPLY CARD

May 28-30, 2009 The 2009 PTDA Canadian Conference, Sheraton Fallsview Hotel & Convention Center, Niagara Falls, ON 312-516-2100; Fax: 312-516-2102; ptda@ptda.org; www.ptda.org

W

The updated ScrewRail® combines drive and support/guidance components in a single, compact coaxial design to save space. It is currently being used in applications for a number of industries, including medical, data storage, semiconductor, industrial machinery, printing/plotting and general automation. By eliminating the need for external rail-to-screw alignment, the ScrewRail simplifies the design, manufacturing and assembly of motion systems. The ScrewRail comprises a precision rolled lead screw, supported by sealed bearings and contained within a concentric steel guide rail, which drives an integrated nut/bushing. The ScrewRail has recently been upgraded with a metalreinforced bushing, providing increased strength and stability. Kerk Motion Products CIRCLE NO. 75 ON READER REPLY CARD

Event Updates

SPK_3.5 x 2.25 4/C

SCREW RAIL

Page 1

World’s most complete line of bird control products - an effective solution for ANY bird problem. C

comall for • TOUGH pet quo itive te! • FLEXIBLE • ECONOMICAL • EASY TO INSTALL

Guaranteed to get rid of birds, and the mess and diseases they bring.

THE BIRD CONTROL “X-PERTS” SINCE 1964 CIRCLE NO. 113 ON READER REPLY CARD

PAGE #


Experts in Spray Technology

Spray Nozzles

Spray Control

Spray Analysis

Spray Fabrication

Change the Way You Spray To Clean Tanks Faster We have dozens of ways to get tanks cleaner in less time. Our full range of solutions can:

Replacing manual cleaning with our motorized tank washers eliminated ongoing contamination problems and lowered operating costs for one manufacturer. Annual savings of $30,000 were reported on labor and downtime.

U Reduce labor, water, chemical and wastewater disposal costs U Minimize downtime and improve worker safety U Ensure process integrity for compliance Choose from fixed or fluid-driven tank wash nozzles, high impact motorized units, retractable tank washers and fully automated systems.

Learn more at spray.com/tankwash Request these helpful publications or visit our web site for more information on automated tank cleaning. U A Guide to Safe and Effective Tank Cleaning, Catalog 15 UÊTank Cleaning Automation White Paper, Bulletin 526

Now Buy Direct! Call 1-800-95-SPRAY Purchase directly from Spraying Systems Co.

Tank wash lances can be customized for any tank wash nozzle

AutoJet® Tank Cleaning System provides automated timing control and chemical injection

U Factory-direct pricing on the same quality products you already know U Spray nozzles, showers, headers, lances, automated systems and testing services U Buy online 24/7 at spray.com/ispray

1-800-95-SPRAY

Threadless design on fluid-driven 28500 nozzles prevents build-up

|

spray.com

|

Controlled rotational speed improves the cleaning impact of Rokon nozzles

SprayCheck™ TW detects pressure loss, clogging and rotation for cleaning validation

Specify and order standard nozzles spray.com/ispray CIRCLE NO. 114 ON READER REPLY CARD


Our shipping policies make it easier than ever to order direct from the U.S.! Free standard ground shipping is available for orders totaling over $300 U.S. (except for items which require LTL shipping, see Web site for details). Also, save on brokerage fees when shipping standard ground to Canada - you can choose to allow AutomationDirect to nominate a broker for your shipment for parts shipping via standard ground. This can save you big on brokerage fees. See Web site for details and restrictions www.automationdirect.com/canada

Choose from MTW, THHN and TFFN styles in the most common gauge sizes and colors

AUTOMATIONDIRECT offers over 1,600 enclosures from Hubbell/Wiegmann across NEMA 1, 3S, 3R, 4, 4X, 6P, 12 and 4/12, and 13 ratings. Choose from a full line of metallic enclosures and operator consoles; our non-metallic line is designed for harsh outdoor environments requiring NEMA 3R or 4X ratings. A full line of accessories, including subpanels, locks and latches, and floor stand kits, is also available. Also get great prices on steel and stainless steel flanged enclosures for mounting disconnects from all the major manufacturers, including the Ferraz Shawmut line sold by AutomationDirect.

• 4 to 18 gauge wire in 500 and 2500-ft. reels • All colors and sizes in stock, starting at $29 for 500-ft. spool • FREE shipping on orders over $300 (shipped standard ground; LTL extra to Canada)

CHECK OUT OUR PRICES AutomationDirect

www.automationdirect.com/wire CIRCLE NO. 115 ON READER REPLY CARD

Signal and power terminal blocks for point-to-point wiring

Price/Part Number

NEMA 1 wall mount 24 x 24 x 08”

$

NEMA 12 wall mount 20 x 16 x 08”

$

NEMA 12 DISCONNECT wall mount (24” x 25-3/8” x 8”)

Hoffman

Hubbell/Wiegmann

Enclosures

Price/Part Number

319.20

152.25

$

205.25

$

N1C242408LP

A-24N24BLP

413.60

N12201608

A-201608LP

$357.50 SDN12242508

$622.60 A24SA2608LP 536.70

30-day money-back guarantee

1,412.00

Order with the assurance of our unconditional 30-day money-back guarantee on enclosures.

266.00

$

$

634.75

$

SSN4202006

A-20H2006SSLP

$

263.25

$

N412362408C

C-SD36248

$

45.50

$

PB3

E-3PB

NEMA 4 wall mount 20 x 20 x 06”

$

NEMA 4X wall mount 20 x 20 x 06” NEMA 4/12 wall mount 36 x 24 x 08” 3-hole 30 mm NEMA 12 pushbutton enclosure

N4202006

A-20H20ALP

537.60 94.12

*All prices are U.S. published prices. AutomationDirect prices from October 2008 Price List. Hoffman prices are taken from Hoffman Price List dated March 3, 2008. Prices may vary by dealer. Many other part numbers are available from all vendors.

www.automationdirect.com For complete information or to order online, visit: www.automationdirect.com/enclosures

1-800-633-0405 • Screw-type terminal blocks in standard gray, plus seven colors for popular sizes • Screwless terminal blocks also available • Power distribution blocks, SCCR rated up to 200kA

www.automationdirect.com/terminal-blocks CIRCLE NO. 116 ON READER REPLY CARD

Choose from the HT800 30 mm metal NEMA series, 22 mm metal or non-metal IEC devices, and incandescent or LED stacklights for panel controls

Rigid and flexible wire duct & Liquid-tight tubing

Over 120 to choose from • All rigid duct comes in 2 meter lengths, with cover, sold individually or in value packs • Flexible duct, braided sleeving and duct accessories available • 30-meter liquid-tight tubing, coils in diameters from 3/8 to 2 inches www.automationdirect.com/wiring-solutions CIRCLE NO. 117 ON READER REPLY CARD

• • • • •

Step Drill Bits Jobber Length Drill Bits Drill Bit Sets Machine Thread Taps Metal Hole Punches (Electrical Knockout Punches) www.automationdirect.com/tools CIRCLE NO. 118 ON READER REPLY CARD CIRCLE NO. 120 ON READER REPLY CARD

• Flush, extended, illuminated or non-illuminated, mushroom and guarded pushbuttons, many available in multiple colors • Pilot and push-to-test lights • Selector switches in knob, lever and keyed versions • Stacklights in modular or pre-assembled units

www.automationdirect.com/pushbuttons_lights CIRCLE NO. 119 ON READER REPLY CARD


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.