EP&T March April 2014 by Annex Business Media

SWITCHES & CIRCUIT PROTECTION

electronic products and technology - MARCH-APRIL 2014 electronic products and technology

AN EP&T PRODUCT FEATURE PAGE 20

POWER SUPPLIES Page 6

MURATA

ENVIRONMENTAL DESIGN Page 12 ECD COMPLIANCE

INDUSTRIAL AUTOMATION Page 14

FREE

PEPPERL+FUCHS

Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: Business Information Group, 80 Valleybrook Drive, Toronto, ON M3B 2S9 circulation@ept.ca

SHIPPING

ON ORDERS OVER $200!

DIGIKEY.CA

http://ept.hotims.com/51123-1

e d i t o r i a l electronic products andtechnology technology electronic products and Volume 36 Number 2

March-April 2014

Stephen Law Editor 416.510.5208 slaw@ept.ca

Sohail Kamal

West Coast Correspondent sohail@nextgear.ca

Joanna Malivoire

Peter Loney

Account Manager Direct: 866.868.7089 jmalivoire@ept.ca

Publisher 416.510.5207 pdloney@ept.ca

Conflict minerals concerns relevant to component buyers If you are in the position of purchasing electronic components, there is good reason for you be aware if they contain conflict minerals. It is obviously paramount to find out, especially prior to having an engineering team design-in those contentious devices. The deadline is approaching for companies to comply with the SEC’s disclosure rules relating to the presence of conflict minerals in manufactured products. Conflict minerals are minerals whose production contributes to the financing of armed conflict and human rights abuses in and around the Democratic Republic of the Congo (DRC). The disclosure rules apply to SEC-reporting companies, including MJDS companies and other foreign private issuers, if conflict minerals are necessary to the functionality or production of a product that the company manufactures or contracts to have manufactured. Conflict minerals include tantalum, tungsten, tin and gold, all of which are used in electronics equipment ranging from cell phones and computers to hearing aids and pacemakers. Maintaining compliance of products to environmental regulations has become a significant challenge and effort for product manufacturers. In turn, design teams working for OEMs and CEMs and even hobbyists must apply their own internal processes to identify requirements, obtain information from a global supply chain, assess conformity/risks,

and to maintain documentation. A recent report from IHS iSupply, indicated that companies across the electronics supply chain need to be prepared to provide compliance information by May. Even if a business does not use conflict minerals in its products, it has to demonstrate it has conducted due diligence in making that determination. A recent IHS iSupply survey indicated that electronics companies risk losing business if they do not comply with the conflict minerals regulations. The survey found that 30% of those surveyed said non-compliance was their biggest risk and concern and 28% were concerned about losing customers. The first step in achieving compliance to substance regulations is knowing the substances of concern. For a more detailed look into the subject of conflict materials, I would urge readers to move forward in this issue of EP&T and read the article supplied by Walter Jaeger, principal consultant with ECD Compliance in Ottawa. The article (on page 12), details some of the environmental regulations surrounding conflict minerals, while helping readers determine substances of concern in their electronic designs. Stephen Law, Editor slaw@ept.ca @EPTmagazine

TECHNOLOGY IN CONNECTORS DESIGNED TO PERFORM Tracy Lelyk

Art Director Group Administrator 416.510.5120 tlelyk@ept.ca

AUTOMATION ENGINEERING

Tracey Hanson

Production Manager 416.510.6762 thanson@bizinfogroup.ca

Bona Lao

Subscription Inquiries 416.442.5600 ext 3552 blao@bizinfogroup.ca

Phyllis Wright

Print Production Manager

Bruce Creighton President

Circular Connectors Field attachable

Alex Papanou Vice President

Tim Dimopoulos

Executive Publisher

EP&T (Electronic Products & Technology) is published nine times per year: Monthly in February, May, August, September, October, Bi-Monthly January/February, March/April, June/July, November/December by:

BIG Magazines LP, a div of Glacier BIG Holdings Company Ltd. 80 Valleybrook Drive, Toronto ON M3B 2S9 info@ept.ca Website: www.ept.ca Tel: 416.442.5600 Fax: 416.510.5134 Sales: 416.510.5207 • Editorial 416.510.5208

ISSN 0708-4366 (Print) • ISSN 1923-3701 (Online) Subscription Rates: Canada: $53.95 per year, US: $79.95 per year, International: $129.95 per year, Single copy: $15 (Canada); $20 (all others)

Editorial Purpose: Electronic Products & Technology provides timely, comprehensive coverage of the latest worldwide developments and trends in electronic products, equipment and systems, and interprets their significance to manufacturers and end-users in the Canadian marketplace.

Field attachable connectors from CONEC give you the freedom and flexibility to react to the cabling situation on site. Practical, cost-effective and above all, flexible solutions for quick cabling termination are required for both small series and special purpose machines. This program includes connectors and adapters – naturally with anti-vibration locking – in straight or angled, as well as in shielded versions. You can choose a cable diameter of 4mm up to 12mm. CONEC also offers a complete product line of overmolded cable assemblies, for details and specifications please contact us at: info@conec.com

Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: EP&T Circulation Dept., 80 Valleybrook Drive, Toronto, ON M3B 2S9, Subscription Inquiries: 416.442.5600 x3548 • circulation@ept.ca EP&T (Electronic Products & Technology) assumes no responsibility for the validity of claims in items reported. © 2014 This publication or any part of it may not be reproduced, stored or transmitted in any form whatsoever without the express written consent of the publisher. From time to time we make our subscription list available to companies and organizations whose products and services we believe may be of interest to you. If you do not want your name to be made available, please contact EP&T with your subscription number.

M12

Screw Connection

7/8“

Round 24

M12

Printed in Canada

SCAN HERE

for EP&T’s Digital Edition M8

CONEC Cooperation 125 Sun Pac Blvd. Brampton Ontario • Canada L6S 5Z6 Tel.: +1 905 790 2200 • Fax: +1 905 790 2201 info@conec.com • www.conec.com

SAL_Fieldattachable_ _.indd 1

http://ept.hotims.com/51123-2

2/20/2013 10:54:50 AM

003

400

representatives and distributors

NEWSWATCH N E W S WAT C H NEWSWATCH electronic products and technology • march-april 2014

J-Squared Technologies to distribute Hammond Mfg

Agilent to spin-off Keysight Technologies

Hammond Manufacturing Ltd., Guelph, leading provider of electrical and electronic enclosures, racks and cabinets, power bars and electronic transformers, has appointed Mississauga-based J-Squared Technologies Inc. as one of its distributors in Canada. “J-Squared’s experienced sales force will make a great addition as a channel partner for us across Canada,” says Ross Hammond, business development manager, Hammond Manufacturing. “Utilizing our SAP system for stock and logistics management, J-Squared works together with customers’ procurement departments to mitigate supply chain issues and become a valuable partner,” says Maria Turavani, VP market development with J-Squared Technologies. “We are very happy to be working closely with Hammond – they have a strong brand recognized across Canada, Maria Turavani, VP market development and manufacture quality with J-Squared Technologies and Ross product.”

Reflects ability to unlock measurement insights for engineers

Hammond, business development manager of Hammond Manufacturing.

Mara Technologies marks 10th anniversary Emerging with just 10 staff members in 2004, Markham-based electronics manufacturing solutions provider Mara Technologies Inc. boasts more than 150 employees worldwide today, as the firm marked its 10th anniversary in business rcently. Founded by industry veterans Jack Vincken and Frank Lam, the company has grown from a single 12,000-sq-ft location in Markham ON to 40,000 sq ft today, plus a similar sized facility in DonGuan, China. “To be in business at a high level for this amount of time is a testament to our loyal employees, our growing customer base and the full support we have from ownership” says Matthew Ruscica, general manager.

Sager signs disty agreement with Artesyn Sager Electronics, North American distributor of IP&E electronic components, has reached a new distribution agreement with Artesyn Embedded Technologies, a global provider of power conversion solutions. Artesyn, formerly the Embedded Computing & Power business of Emerson Network Power, was acquired by Platinum Equity in 2013.

Agilent Technologies Inc., Santa Clara CA, has revealed the name of the electronic measurement company it expects to spin off in early November 2014 as Keysight Technologies. The name Keysight conveys the ability to see what others cannot, offering the critical or key insights to understand and unlock the changing technology landscape. The new company’s tagline, “unlocking measurement insights for 75 years,” commemorates the 1939 birth of the original Hewlett-Packard Company, from which Keysight originated. “Keysight reflects our rich heritage—a direct line from both Hewlett-Packard’s standards of integrity and innovation and Agilent’s premier measurement business,” said Ron Nersesian, president and CEO of Keysight. “This name captures the spirit of our organization—innovative, insightful and forwardlooking,” said Nersesian, who added, “While Keysight is built on ‘firsts’ dating back to the birth of Silicon Valley, as a new company we are committed to bringing our customers a new generation of firsts—unlocking insights for them so they can in turn bring a new generation of technologies into the world.” Keysight will concentrate solely on the electronic measurement industry, focusing on its test and measurement customers. The business, currently a part of Agilent, is the world leader in test and measurement, holding the No. 1 position in its industry segments of wireless data ecosystem; aerospace and defense; and industrial, computers and semiconductors. The new company will include the entire portfolio of Agilent electronic measurement products and the largest sales and support team in the test and measurement industry. Expected to become a standalone company in early November 2014, Keysight will be headquartered in Santa Rosa, Calif., and have approximately 9,500 employees in 30 countries.

E-T-A adds Matrix Technology as distributor E-T-A Circuit Breakers Ltd., Richmond Hill ON, has appointed Matrix Technology Ltd., Markham ON, as a new certified E-T-A distributor. Matrix is a specialized distributor to leading OEM industries such as aerospace, medical, energy and defense. “Matrix is pleased to represent such a professional, knowledgeable and high quality power distribution and circuit protection manufacturer as E-T-A,” comments Simon Bennington, president of Matrix Technology. “This will enable us to continue the tradition of bringing innovative solutions to our highly valued customer base.” Simon Bennington, president of Matrix Technology shakes hands with Sima Yildirim of E-T-A Circuit Breakers.

Aqueous Tech appoints Arbell as exclusive Canadian sales partner Connected to the Electronics Industry CALGARY

NEW DIRECTION

(Stocking Location) 2015-32nd Ave. NE Unit 1 Calgary, Alberta T2E 6Z3 Tel.: (403) 291-5626 Fax: (403) 291-1020 calgary@active-tech.ca

A new dynamic and experienced team committed to exceptional service.

EDMONTON

AVAILABILITY

(Stocking Location) 6029-103rd St. (Gateway Blvd.) Edmonton, Alberta T6H 2H3 Tel.: (780) 438-0644 Fax: (780) 438-0780 edmonton@active-tech.ca

OTTAWA (Stocking Location) 1465 Merivale Road Nepean, Ontario K2E 5N9 Tel.: (613) 728-7900 Fax: (613) 728-3586 ottawa@active-tech.ca

Across the country, we are stocked and logistics ready.

INTEGRATED Partnering with industry leading brands, providing exceptional solutions, support and expertise.

R.D. Associates, Toronto, has signed a manufacturers’ representative agreement with Edak Inc., makers of aluminum cases aimed at field operations, military and commercial transport usage. Engineered to withstand harsh environments, Edak designs and manufactures both standard and nonstandard aluminum transit housings for rack and flange mount electronic equipment needing protection from a variety of elements such as shock, vibration, water, dust. EDAK also fabricates cases for general shipping purposes.

Testforce to distribute Rohde & Schwarz Value Instruments in Canada Rohde & Schwarz Canada (RSC), Mississauga ON, has announced that Testforce Systems Inc. will distribute its Value Instruments Portfolio in Canada. RSC has experienced strong growth in its core RF markets. Expansion of the Value Instruments portfolio beyond RSC’s traditional market created the opportunity to increase distribution through Testforce.

EML to represent Icotek in Western Canada

TORONTO (Sales Office)

Aqueous Technologies, Rancho Cucamonga CA, manufacturer of fully automated cleaning/defluxing machines and cleanliness testing equipment, has appointed Arbell Electronics as its exclusive sales partner in Canada. Founded in 1968, Arbell Electronics is a leading provider of production supplies and equipment, representing leading vendors with a strong technical sales team. Arbell maintains the largest national sales coverage from coast to coast.

R.D. Associates to represent Edak cases

Tel.: (416) 498-9886 Fax: (416) 498-9875 toronto@active-tech.ca

WINNIPEG

Calgary-based manufacturers’ representative EML has reached an agreement to represent the patented Icotek Cable Entry System in Western Canada. Icotek’s cable entry system enables the user to enter, seal and provide strain relief for pre-terminated and standard cables. The key feature of the patented system is the split frame and split inserts which provide quick, convenient and cost effective routing of pre-terminated and standard cables.

(Stocking Location) 106 King Edward St. E. Winnipeg, Manitoba R3H 0N8 Tel.: (204) 786-3131 Fax: (204) 779-7521 winnipeg@active-tech.ca

www.active123.com 1-866-663-8223

http://ept.hotims.com/51123-3

Tektronix acquires Picosecond Pulse Labs Tektronix Inc., Beaverton OR, global provider of test, measurement and monitoring instrumentation, has acquired Picosecond Pulse Labs, Boulder CO. The move is intended to strengthen the Tektronix portfolio in the growing market for test equipment to support 100G/400G optical data communications research and development. The terms of the transaction were not disclosed. Privately-held Picosecond Pulse Labs provides products that include ultra-high-speed pattern generators, fast pulse generators and high bandwidth sampler modules. The company recently introduced the PatternPro line that includes multi-channel 32Gb/s data generators and analyzers for 100G/400G applications.

full online product listings at.ept.hotims.com

ConneCted. e-CommerCe SoLUtIonS From AVnet Biggest inventory, best prices, proven design services – online. AvnetExpress.com provides the largest catalog of components from leading manufacturers to meet all of your design, prototyping, and production needs; one right after the other. With Avnet Express, 5 million parts and unlimited technical design resources are a mere click away. Same-day shipping ensures you get the products you need – faster than a speeding bullet. All aboard for your trip to design success. What can we do for you? www.avnetexpress.com http://ept.hotims.com/51123-4

Accelerating Your Success!™ 1 800 332 8638 | www.avnetexpress.com |

@avnetdesignwire

electronic products and technology • march-april 2014

Power Supplies

The basics

of convection cooling for applications that cannot use a fan

By Steve Elliott, sales director, XP Power

Cooling without a fan When choosing a power supply for a given application, there are many reasons why you may want to avoid using a fan to cool it. The audible noise coming from a fan can be a deal-breaker. For equipment destined for laboratory or control room environments, where the operator is in close proximity to the equipment at all times, minimal audible noise is a very desirable characteristic. Medical equipment that is used near to the patient, such as patient monitors and infusion pumps that are near the patient for a long period of time, also need to be as quiet as possible. Another downside of fans is their reliability. The low lifetimes of these mechanical components can mean they fail in use, leading the power supply to overheat, or require more frequent maintenance or replacement before the end of their life. For systems which require a high

IP-rating, fans are clearly out of the question, since very little ventilation is permitted in order to keep solid and liquid contaminants out. For example, any equipment used in food processing areas will need to have a high IP rating as there will be solid and liquid contaminants present in the environment. Lower IP ratings, perhaps enough to keep out dust from industrial equipment, may condone use of a fan, but often air filters are required. These filters will need scheduled maintenance to clean or replace them periodically, which may be undesirable.

Convection cooling If your application restricts the use of a fan, you’ll need to look at convection or conduction cooling. Conduction cooling involves bolting the unit to a large heat sink or metal box so the heat is transferred to the outside of the equipment. This is usually reserved for high power applications with larger

levels of waste heat, as it can be complex and expensive to achieve. This article will instead focus on convection cooling as a simple approach for lower power equipment. Convection cooling, put simply, means there is enough free air around the power supply that it can dissipate the amount of heat it needs to without raising the ambient temperature too much. Natural convection currents inside the enclosure cool the unit. As a result, there is a big difference in the power densities offered by power supplies for forced air (fan) cooling and convection cooling, for a given efficiency. A typical 3" x 5" power supply may have a convection cooled rating of 150W while the force cooled version may have a rating as high at 350W. It’s important to fully understand the likely constraints that a convection cooled power supply might operate under in order to ensure the lifetime and reliability of your design.

Efficiency ™

INTERCONNECT COmPONENTS & haRdwaRE

Battery Clips, Contacts & Holders

Spacers & Standoffs

Fuse Clips & Holders

Terminals and Test Points

Plugs & Jacks

Efficiency is even more important for a convection cooled power supply than for a force cooled one, since all the heat will be staying inside the box; if air can be blown over a unit, dissipating a few more Watts doesn’t matter as much. Every efficiency point means less heat dissipated — and technology is improving the efficiencies that can be attained all the time (Figure 1). When specifying a convection cooled power supply for your equipment, you’ll want to choose the most efficient power supply that matches your budget. For example, if your application requires the highest efficiency, XP’s CCB200 boasts an efficiency of 94%; this 200W supply dissipates just 12W from its 3" x 5" footprint (Figure 2). For more cost-sensitive applications, a suitable alternative might be the 150W convection-cooled GCS180, which is 92% efficient. It’s advisable to check that whatever claims the manufacturer is making about the rating can be backed up by the efficiency, otherwise cooling is likely to be a problem. There are several things to bear in mind that may affect the headline efficiency number quoted on the data sheet.

Figure 2: XP’s 94% efficient CCB200 dissipates just 12W from its 3 x 5" footprint, making it suitable for convection cooling.

This headline efficiency is usually a bestcase-scenario and will therefore not be available over the full spec of the unit.

For example For example, the input voltage used affects efficiency in real-world applications. Most ac-dc supplies on the market have a universal input for worldwide use. However, in the USA, where mains voltage is around half the European equivalent (230V), double the input current is required to produce the same amount of power. Working with higher currents produces a lot more loss in the various components of the power supply and efficiency suffers. Considering the resistive losses alone, the power lost is I2R, so doubling the input current (from high line voltages to low line) actually multiplies the power lost by a factor of four. Dropping from US voltages (115V) to Japanese mains (90V) increases the input current by a further 28%, creating another 65% more resistive loss. Many data sheets therefore only specify the efficiency at high line voltages.

Convection ratings The next thing to check on the datasheet is the rating curves for the power supply. It may surprise you to learn that there isn’t an industry standard way for manufacturers to gather this rating information – practices vary widely. Products are generally tested in an environmental chamber, but some of these chambers use fans to maintain the temperature, inadvertently creating an air flow around the unit. Obviously, this is to be avoided if you are trying to measure under strict convection conditions since even a small amount of air flow can have a significant effect. continued on page 10

Multi-Purpose Hardware

It’s what’s on the InsIde that counts ® E L E C T R O N I C S

C O R P.

EMX Enterprises Ltd Vancouver • Toronto • Montreal Tel: (905) 764-0040 • 1-800-268-6822 • Web: www.emx.ca • e-mail: sales@emx.ca

Figure 1: Every percentage point improvement in efficiency has a marked effect on the amount of waste heat generated. http://ept.hotims.com/51123-5 EP&T-THiNK Corp 3-14.indd 1

2/18/14 11:22 AM

full online product listings at ept.hotims.com

power supplies

electronic products and technology • march-april 2014

Surface mount coin cell holders are ultra low-profile

mounting strength. EMX ENTERPRISES

Keystone #2032 Lithium coin battery cell holder is surface mount and provides an ultra-low profile of 2mm above the pcb surface. Device retains cells securely under shock and vibration in highdensity applications for pcb requirements. Device provides built-in stabilization tabs in the LCP, UL 94V-0 base add mounting security, while gold plated contacts assure increased pcb and solder joint http://ept.hotims.com/51123-37

Converter housed in Package (ChiP) quadruples power density ChiP bus converter modules (BCM) delivers 48Vdc with an output power of 1.2 kW, 98% peak efficiency and 1880 W/in3 (115 W/cm3) power density: representing four times the density of competing solutions. Technology dramatically reduces the size and weight of designed systems. Device has a K-factor of 1/8, and operates from an input voltage range of 260 to 410Vdc, allowing it to support outputs from 32.5 to 51.25Vdc. VICOR http://ept.hotims.com/51123-40

300W ac-dc power supplies are medical approved MPU-300M series of compact 300W ac-dc power supplies that are certified to EN 60601 3RD edition. Devices combine power and safety with robust performance and compact construction. Four standard models operate from a universal input of 90 to 264Vac, providing tightly regulated single outputs of 12, 15, 24, or 48Vdc. Standard features include filtering to EN55022 Class B, dual fused input protection, active power factor correction to EN 61000-3-2 D, peak output power to 600W, reinforced insulation and an I/O isolation of 4,000Vac. MICROPOWER DIRECT http://ept.hotims.com/51123-38

240 Watt DIN mount switching ac-dc power supply DNP240 Series of ac-dc switching power supplies provides 240 Watts of fully regulated output power in a Din-Rail mount case. Product’s easily accessible terminal block and output voltage adjustment potentiometer provide versatility in application use. Product is power factor corrected and has a universal input voltage range of 90 to 264Vac. Products provide output voltages of 12, 24 and 48Vdc, with efficiencies up to 92%. Unit’s deliver protective features such as short circuit, over voltage and overload protection. CALEX http://ept.hotims.com/51123-39

MEDICAL ISOLATION

Bulk front-end power supply supports high efficiency distributed power architectures D1U86G-W-460-12-HxxDC bulk front-end power supply meets the needs of systems requiring high efficiency distributed power architectures. Device’s output power is rated at 460W with one main and one standby output. Unit provides high efficiency performance, hot plug capability and parallel operation with droop current sharing. Closed-loop internal fan cooling provides reliable long life operation. Industry standard PMBus communication protocol makes system integration with this supply seamless and straightforward. MURATA

http://ept.hotims.com/51123-41

SMD power inductors boost reliability rating MILP1812, MIL4922 and MIL8532 SMD power inductors achieved a ‘T’ Level reliability rating and meet all Military QPL requirements. Product’s ruggedized molded and leaded construction is proven against MIL-STD-202 mechanical vibration, moisture resistance and DWV testing. Devices are thermally shocked for 25 cycles, burned-in for 96 hours, and X-ray inspected before customer delivery. API DELEVAN http://ept.hotims.com/51123-42

Custom Electronic TRANSFORMERS TRANSFORM ERS When a standard transformer won’t do, enlist the help of the experts at Hammond Manufacturing.

POTENTIAL

Our in-house engineering staff are ready to tackle your modified or custom magnetic needs. Hammond Manufacturing offers the convenience of local engineering and production. For larger volumes we can also draw upon our network of trusted offshore suppliers.

MEDICAL POWER OUTPUT INVERTER BROADCAST AUDIO

Make Hammond your first call for custom electronic transformers!

Email: 5c@hammondmfg.com Toll Free: 877-411-5911

www.hammondmfg.com Hammond transformer engineers will be at an EPTECH show near you!

If the Hammond Manufacturing insert is missing from this issue, please go to http://ept.hotims.com/51123-6

w w w. e p t . c a

TRANSFORMER QUESTIONS?

power supplies

electronic products and technology • march-april 2014

Dual output channel open frame internal power supply delivers 0 to 100V

Active harmonic filter boosts efficiency, reduces harmonic pollution

Model Series GTM93038-50VV-X.X-FW 50W dual output channel open frame internal power supply provides 0 to 100V programmable voltage output for medical applications and meets North American national standard ANSI/AAMI ES60601-1 and EN/IEC 60601-1. 3rd edition is rated up to 50W output with dual outputs. Product’s dual output switcher provides a programmable variable 10Vdc @2.6A to 100Vdc @0.26A output, as well as 12V 2A regulated output typically used for housekeeping or PWM. For applications employing 2 units in parallel, one or both may be wired for negative voltage such as -10v to -100V. The output voltage control method is 0Vdc TO 10Vdc, control input impedance at least 10K ohm. GLOBTEK

PB Series three-wire and four-wire active harmonic filter modular systems meet IEEE 519. The filters have ultra-fast (21µs) reactive power compensation, phase compensation current of 60A to 300A extendable and harmonic correction is provided for harmonics to the 50th order. Additional features include flicker compensation, ultra-fast response time of <300µs, load balancing between phases and unload neutral wire and grid resonance detection. Product family is scalable and provides a practical solution for improving power quality for many applications. SCHAEFER

http://ept.hotims.com/51123-43

http://ept.hotims.com/51123-46

Quarter brick dc-dc converters deliver 200-425Vdc input

200~400W ultra low profile economic sign panel power supply

PH-A280 series of dc-dc power modules with high voltage dc input operate from a wide range dc input of 200 to 425Vdc. Products are available in four output power levels of 50W, 75W, 100W and 150W, while nominal output voltages consist of 5V, 12V, 24V or 48Vdc. Devices are adjustable by -20% to +10% (+/-20% for 5V output models) and efficiencies of up to 90% are achieved. TDK-LAMBDA

http://ept.hotims.com/51123-44

Synchronous dc-dc controller delivers up to 10A output LT8710 synchronous SEPIC, inverting, boost and flyback multi-topology dc-dc controller replaces the output diode with a high efficiency P-channel MOSFET, increasing efficiency, maximum output current (up to 10A), eliminating the heat sink typically required in medium to high power applications. Product operates over a 4.5V to 80V input voltage range and produces an output voltage that is dependent on the choice of external components. Its rail-to-rail output current monitor and control enables the device to be configured as a current source. Device provides an EN/FBIN pin circuitry for slowly varying input signals and an adjustable undervoltage lockout function. This pin is also used for input voltage regulation to avoid collapsing a high impedance input source such as a solar panel. LINEAR TECHNOLOGY http://ept.hotims.com/51123-45

Mean Well NEL-200/300/400 series adopts the 30mm ultra low profile design that allows the height and weight of the sign module to be lowered, lessening the manufacture cost as well as relieving the inconvenience from installation. Product incorporates non PFC design, achieving a high efficiency up to 87% with a low cost that enhances the system performance and achieves energy saving and electricity expense reduction. Product series takes the input range between 180Vac and 264Vac; the output voltage of 2.8V/4.2V/5V are provided that the sign panel driver ICs of both the old and the new generation can work with, greatly raising the system design flexibility. SIMCONA http://ept.hotims.com/51123-47

Power monitoring IC boosts accuracy signal acquisition, power calculations MCP39F501 power monitoring IC is a highly integrated, singlephase device designed for real-time measurement of AC power and includes two 24-bit delta-sigma ADCs, a 16-bit calculation engine, EEPROM and a flexible two-wire interface. Devcie allows designers to add power monitoring to their applications with minimal firmware development. Product’s performance enables designs capable of 0.1% error over a wider dynamic range and superior light load measurement versus current competing solutions. MICROCHIP TECHNOLOGY http://ept.hotims.com/51123-48

High temperature, voltage dc-dc converters reduce design time

Do you have what it takes…

HTH27022S and HTM27092S isolated hybrid hermetic dc-dc converters for high temperature and high shock environments provide an operating case temperature of 165C with transient up to 175C and with a high nominal input voltage of 270V. The COTS devices can significantly reduce design cycle time, size and design costs associated with high temperature applications. Products provide internal EMI filter, magnetically coupled current feedback, under-voltage lockout, output over-voltage limiter, external inhibit and short circuit and overload protection. INTERNATIONAL RECTIFIER http://ept.hotims.com/51123-49

Power supply’s output varies between eight dc options

to be cool? Murata Power Solutions’ AC-DC power supplies are designed to provide you with the highest standards in terms of power, performance, efficiency, and cooling. Check out our newest offering and find out what makes them so cool.

Model 00389 COTS power supplies operate from 115/200Vac +/-20% at 360 to 440Hz and provide eight dc outputs of varying power. Devices include improved specs for load and line regulation; PARDripple and noise; Over-voltage protection; Shortcircuit protection; Current limit, Extreme operating and storage temperatures; plus high MTBF. Product comes in a compact chassis measuring 30.48 cm long x 17.78 cm wide x 6.04 cm high). BEHLMAN http://ept.hotims.com/51123-50

Step-up converter delivers up to 350W from nominal 12V MVAD: 40W & 65W Convection cooled 1U, 2x 4" IEC 60601-1 medical approved

MVAC: 250 & 400W 1U, 3 x 5" Up to 94% efficiency IEC 60601-1 medical approved

D1U54P: 1200W; 1U form factor 54 mm wide; minimum dissipation 94% 80 Plus® Platinum efficiency

MVAB120: 120W 1U, 2x 4” 91% efficiency IEC 60601-1 medical approved

D1U86G: 460 Watt ,1U form factor 86 mm wide 80 Plus® Gold efficiency

For complete specs on these cool power supplies: murata-ps.com/ac-dc

F351 Series step-up, full-brick dc-dc converter delivers up to 350W from a nominal 12V (11V to 18V) input. Designed for 12Vdc input applications, product family provides single isolated outputs of 12Vdc and stepup conversion to 12, 24, 28, or 48Vdc. Modules deliver a list of in-built protection over-voltage, under-voltage and short circuit protection and thermal monitoring for remote system monitoring and control. Devices provide low input and output ripple currents, input transient protection, single point connection for parallel operation for true N+1 redundancy, active load sharing, external sync, hot plug capability, remote sense and shutdown, thermal protection and current limit. POWER SOURCES UNLIMITED http://ept.hotims.com/51123-51

http://ept.hotims.com/51123-7

full online product listings at ept.hotims.com

power supplies

electronic products and technology • march-april 2014

Ac-dc mini encapsulated linear power supplies are UL, CE certified

Step-down buck dc-dc converter drives 1A load with no external transistor

Ac-dc mini encapsulated linear power supply series is encapsulated in an ultra-compact, low profile housing to provide environmental protection in space-limited applications. The single and dual tracking output devices enhance regulation and ripple parameters and come with screw terminal connections. Units provide regulated voltage outputs ranging from 1V to 75Vdc, current as high as 2.5A, and an output power range of 0.5W to 14W. ACOPIAN POWER SUPPLIES

APE1723-HF-3 is a 200kHz 1A PWM buck dc-dc convertor with an adjustable output voltage range from 0.745V to 24V. Device can drive a 1A load without an external transistor, saving considerable board real estate and operates at a fixed switching frequency of 200kHz, enabling simpler filter components to be used in a design. Product’s external shutdown function is controlled with logic level signals, putting the device into its low-power standby mode. Device features thermal shutdown for protection against damage in the event of over-temperature operation and has current limit protection and short circuit protection to safeguard the output switch. ADVANCED POWER ELECTRONICS

http://ept.hotims.com/51123-52

3W isolated dc-dc converters reduce board space, cut power consumption PQMC3-S and PQM3-M familes of isolated dc-dc converters are rugged, compact and increase total efficiency across the entire load curve, while improving performance at light and no loads. Products are rated at 3W. Model PQMC3-S is available with input ranges of 4.5~9, 9~18, 18~36, or 36~75Vdc, while model PQM3-M Series provides input ranges of 9~18, 18~36, or 36~75Vdc. Both families come equipped with an operating temperature range of -40C to + 85C at 100% load. CUI http://ept.hotims.com/51123-53

http://ept.hotims.com/51123-57

85V half bridge MOSFET driver automatically sets dead time for power efficiency MIC4605 85V Half Bridge MOSFET driver provides Adaptive-Dead-Time and Shoot-Through Protection, which actively monitors the Half Bridge to minimize the time between high and low side MOSFET transitions, maximizing power efficiency. Anti-Shoot-Through circuitry prevents erroneous inputs and noise from turning both MOSFETs on at the same time. Device provides a wide 5.5V to 16V operating supply range to maximize system efficiency. The low 5.5V operating voltage allows longer run times in battery powered applications. MICREL http://ept.hotims.com/51123-58

Off-Line PWM controllers with integrated power MOSFET STR4A100 series off-line PWM controllers incorporate both a sense MOSFET and a current mode PWM controller IC (developed by Sanken Electric Co.). Product series uses a secondary side regulation topology suitable for low power SMPS regulators in white goods and other applications. An auxiliary power supply, which is separated from the inverter or main power supply, may require high-efficiency and low stand-by power. Product makes it possible to lower the stand-by power to less than 10mW. The low standby power is accomplished by the automatic switching between the PWM operation in normal operation and the burst-oscillation under light load conditions. The end result yields a high cost-performance power supply system with few external components. ALLEGRO MICROSYSTEMS http://ept.hotims.com/51123-54

50-Watt dc-dc converter delivers 4:1 input TMX Series dc-dc converters provide up to 50 Watts of fully regulated output power with an industry standard 2 x 1" footprint. Products deliver a 4:1 input range with nominal input voltages of 24Vdc and 48Vdc. Single outputs offered are 3.3, 5, 12, 15 and 24Vdc. Devices operate with efficiencies as high as 92% and include remote on/off, output trim and short circuit protection. The operating ambient temperature range of the device is -40C to +105C case temperature. De-Rating curves will apply for operation in higher ambient conditions. CALEX http://ept.hotims.com/51123-55

Low profile ac-dc power supplies withstand harsh environments TER Series of rugged, ultra low-profile ac-dc power supplies provide a wide operating temperature range, which makes them suitable for harsh operating conditions. Product comes in a compact package (1.1” profile) and delivers high power-density and power factor correction. With universal input and an operating temperature range of -50C to 85C, product provides single and multi-channel isolated outputs (up to 3 outputs). SCHAEFER http://ept.hotims.com/51123-56

w w w. e p t . c a

http://ept.hotims.com/51123-8

power supplies

electronic products and technology • march-april 2014

Ultra-compact 65W ac-dc power supply comes with medical, ITE approvals

35A power block dc-dc converter module suits FPGA, embedded applications OKLP-X/35-W12-C Power Block 35A dc-dc converter solution sits between a discrete Point-of-Load (PoL) design and that of a complete non-isolated buck converter module. Device is a nonisolated buck converter without the PWM controller. Device measures 25.4 x 12.7 x 11.1mm and has a typical efficiency rating of 94%. Input voltage is a nominal 12Vdc and can accommodate the range of 7 to 13.2Vdc. Device provides a single package solution that incorporates all of the power handling components, fully tested and characterized for thermal and dynamic performance. MURATA POWER SOLUTIONS http://ept.hotims.com/51123-59

TWM65 series of 2” x 3” ultra-compact open frame ac-dc power supplies provide 65 watts output, 0.2 watt no-load power consumption and medical-ITE dual approvals. Devices provide 90 to 264 volts universal ac input and 0.95 power factor. Units are available with factory preset single outputs from 12.0 to 56.9Vdc in 0.1V increments to meet the customer’s special requirement. A 5V/40W output model is also available in the same compact form factor of 2” x 3” x 1.13”. TRUMPOWER http://ept.hotims.com/51123-61

DIN rail mount power supplies come in compact sizes DRB series of DIN rail power supplies for low power applications require less space on the mounting rail. Products combine low cost and extremely compact dimensions with efficiency of up to 91%. No load power consumption is between <0.3W and <0.5W depending on the model type. Housed in a robust plastic case, products provide a narrow design, ranging from 18mm to 45mm, saving vital space on the DIN rail. Units operate from a universal input of 85~264Vac and have EN61000-3-2 compliance, enabling worldwide use. TDK-LAMBDA GlobTek 2.13.13_ep&t 2/26/2013 9:05 AM Page 1 http://ept.hotims.com/51123-60

Need Power?

Think GlobTek

Smart Battery Chargers Offer Three-Phase Operation

Available in versions delivering 4.2V, 8.4V, or 12.6V at 1 A to address single- or multiple-battery configurations, the GTM91128 families of smart LiIon battery chargers from GlobTek offer three charging methods: conditioning, constant current, and constant voltage. The universalinput devices have a minimum current charge termination technique with timer as back up, with LED indication of charging and fully charged states. An additional feature of the smart battery charger family is that they have ...for more click www.globtek.com

MedicallyApproved Open-Frame Switchers Deliver Up to 240W

Suitable for use in a variety of medical, ITE, and PoE applications, the GTM91110P240 Family of openframe AC/DC switchmode power supplies from GlobTek deliver up to 240W in a 3 x 5inch footprint. The devices are provided in factory-configured outputs from 12 to 55 V (in 0.1-V increments). Available in Class I or II versions, the 1.75-high power supplies are 85% efficient at full load and include features such as active PFC, a built-in EMI filter, and a 12-V fan output as well as DC-input versions from 130VDC to 380VDC. “Our switchers are versatile power supplies; you can use them in just about any indoor applica-

High power TVS diodes provide bidirectional port protection Models PTVS15-058C-SH and PTVS15-076C-SH high Power TVS diode models in SMD packaging for use in ac and dc power line applications provide high current bidirectional port protection meeting IEC 61000-4-5 8/20µs current surge requirements. RoHS compliant devices boost performance stability and increased reliability. Product’s SMD package provides a 20% reduction in peak clamping voltage compared to an equivalent through-hole device because of its lower lead inductance. BOURNS

60W high density power supply reduces footprint MB60S single output, convection cooled, wide temperature range ac-dc medical-grade power supply provides 60 watts in an ultra-compact 2" x 3" x 1.0" package. Unit is approved to the highest safety standards, including EN/IEC/UL606011, 3rd edition with Means of Patient Protection (2x MOPP). Products are certified for use in both patient vicinity and patient contact applications. Newer models provide a universal input of 90 to 264Vac and dc outputs range from 12V to 48V. Unit operates from -10C to 80C with -40C start-up and has less than 0.5W of no-load power consumption. SL POWER ELECTRONICS http://ept.hotims.com/51123-63

50W zener diodes deliver range of 6.8V to 200V Series of 50W power Zener diodes (part numbers: 1N3305 thru 1N3350) packaged in a DO-5 case provide voltage regulation protection in a broad array of applications. Offered in a ruggedized, hermetically sealed DO-5 package, devices are precision manufactured to withstand such adverse operating conditions as shock and vibration and are constructed to promote good clamping ability. Products provide solderable terminals, corrosion resistant external surfaces and a cavity-free glass-passivated junction to enhance the reverse voltage resistance and reduce leakage. AMERICA SEMICONDUCTOR http://ept.hotims.com/51123-64

...for more click www.globtek.com

Rechargeable Battery Pack Provides Fuel Gauge Data

Providing smart rechargeable power capability to advanced portable and remote devices, the BL3100C1865004S1PSQA Li-Ion Battery Pack from GlobTek incorporates fuel-gauge functionality to provide important power status information. The 14.4V pack has a 3.1Ah capacity and includes a built-in protection circuit as well. “You can no longer put a battery in one of today’s products without providing a means to check on the power status, as device operating life is a critical aspect of a device’s performance.” ...for more click www.globtek.com

http://ept.hotims.com/51123-9

Rechargeable lithium polymer battery boosts capacity, reduces form factor ICP Series 3.7V rechargeable Li-polymer battery portfolio includes smaller, lower-profile flexible foil cells, as well as batteries with higher power capacity. Model ICP341018PA battery pack is a lightweight (1.7g) ultra-small form factor (19.5 x 10.2 x 3.7mm), with 35mAh typical capacity. Model ICP303450PA battery pack is an ultra-thin form factor (52.0 x 34.5 x 3.5mm), delivering 500mAh typical capacity. Model ICP606168PRT battery pack is a higher capacity power source, providing 2700mAH in a package measuring 71.0 x 62.0 x 6.7mm. Each device is rated for a nominal voltage of 3.7V, with a cycle life of more than 500 cycles (at 80% minimum capacity), and an internal safety circuit to prevent overcharging or deep discharge conditions. RENATA BATTERIES http://ept.hotims.com/51123-65

The basics of convection cooling continued from page 6

At XP Power, the firm places its product in the chamber inside another box and maintains the ambient temperature based on the temperature inside that box, to try to get an accurate picture of the product’s performance. This creates consistency across design groups and repeatability, which is also a challenge when performing thermal testing. Information like how the product is tested is almost never included on the datasheet but nevertheless has an impact on the final ratings. In order to meet safety requirements, be it industrial, medical or IT, there are maximum temperatures that certain components (like transformers) can be run at. The thing to remember here is that the safety temperatures are the absolute maximum temperatures allowed, not a recommendation for normal use. If the product was to run consistently at the safety temperature, though it might pass UL approvals, the lifetime of sensitive components would suffer. To deliver a long life, the system should run as cool as possible.

Tips and tricks

Power Supplies & Cords – Wall Adapters with Interchangeable Plug Option – Desk Top to 200W – Open Frame with PFC – DIN Rails to 960W – LED Drivers – Medical Approvals

MEGA Electronics Inc.

www.globtek.com

http://ept.hotims.com/51123-62

4B Jules Lane New Brunswick, NJ 08901 tel 732.249.2656 fax 732.249.7442 www.megaelectronics.com sales@megaelectronics.com

Other things to remember when designing for convection cooling include the fact that the power supply is designed to be placed horizontally or vertically. At no time should it be used upsidedown. Since heat generated by the power supply will naturally rise, placing the power supply’s pcb above the hot components is not recommended. Also, don’t forget to consider what other parts of the system are likely to get hot. Are you using a large CPU? A display? What about a motor or pump? These heat-generating components will also require cooling and will add to the waste heat inside the product.

Summary Though convection cooling does not permit as much waste heat as forced air cooling, it is a must for certain applications where a fan is not acceptable. Since the waste heat remains inside the enclosure, it helps to choose a power supply whose efficiency is as high as possible and to check carefully whether the manufacturer’s efficiency claims can actually be met in your application. For more information on convection cooling for applications that cannot use a fan from XP Power, go to http://ept.hotims.com/51123-66

http://ept.hotims.com/51123-10

full online product listings at ept.hotims.com

products on review

electronic products and technology • march-april 2014

Crimpers boost power on loose-piece applications

Fans protect critical electronic components

CT line of pneumatic crimping machines is suitable solution for a large range of loose-piece crimping applications. Next generation replacement machines provide a fresh look along with increased power, flexibility, productivity and improved ergonomics. Models CT 34, 34S and 36 can supply up to 4kN (0.4 tons) more crimping force, reaching a maximum force of 35kN (3.9 tons). Model CT 60 can supply up to 15kN (1.7 tons) more crimping force, reaching a maximum force of 75kN (8.4 tons). All units have a 15 degree tilt that provides an optimal viewing angle of the crimping area. All units (except CT 30S) provide LED lights that enhance visibility of the crimping area. SCHLEUNIGER

Line of high quality cooling fans and accessories protect critical electronic components by keeping them at an optimal operating temperature. Devices protect against thermal variances that could harm components and prevent a premature failure, while also ensuring optimal performance. Available in both ac and dc types, ac fans provide a constant flow, while dc fans can run at variable speeds. Dc fans consume less power, generate lower levels of EM and RF interference and are much quieter in operation. NTE ELECTRONICS

http://ept.hotims.com/51123-114

http://ept.hotims.com/51123-110

VOC-free flux remover is enviro friendly

Data acquisition system scans, records accurate temperature 1586A Super-DAQ accurate and flexible temperature data acquisition system scans and records temperature, dc voltage, dc current and resistance for up to 40 input channels and scan speeds as fast as 10 channels per second. Unit can be configured for use as a multi-channel data logger in the factory or as a precision reference thermometer for benchtop sensor calibration in the lab. Product can measure thermocouples, PRTs, thermistors, dc voltage, dc current, and resistance. FLUKE

UltraClean VOC- free flux remover is completely free of smog-producing organic compounds (VOCs), free of halogens and free of ozone-depleting substances. Product has improved health-and-safety profile, so it is very safe for technicians to use. Product complies with international environmental regulations by using an all-new halogen free/ non-chlorinated formula that contains no volatile organic compounds (VOCs). It is also packaged in a GHS compliant dispenser with safety phrases translated in 14 languages. MICROCARE http://ept.hotims.com/51123-115

2014

http://ept.hotims.com/51123-111

Lightweight miniature absolute rotary encoder boosts accuracy Netzer DS-25 lightweight miniature absolute rotary encoders provide accurate, high resolution, absolute position with miniature to wide diameter hollow shaft and are available with analog or digital outputs. The holistic structure of the device provides generous mounting tolerance, obviating the need for internal ball bearings. The lack of bearings and components such as flexible couplers, glass disc, light sources and detectors, along with very low power consumption reduces failure. The internally shielded, dc-operated device includes an electric field generator, a field receiver, a sinusoidal shaped dielectric rotor and processing electronics. ELECTROMATE http://ept.hotims.com/51123-112

EP&T announces its 2014 series of EPTECH trade shows

EPTECH Shows have thousands of leading-edge products & services on display: • Passives • Switches • Wire & Cable • ICs • Test Equipment • Data Acquisition • Electronic Components • E-Commerce • Industrial Electronics • Peripherals • Relays • Hardware • Semiconductors • Tools • CAE/CAD Systems • Connectors • Batteries • Sensors • Chemicals • RoHS Compliant Products ... and many more

Plan to attend if you are an: • Engineer • Designer • Technician • Purchaser • Technical & Senior Management ... or are involved with electronics

CALGARY • March 4 • 10am-5pm The Coast Plaza Hotel & Conference Centre* EDMONTON • March 6 • 10am-5pm Mayfield Inn & Suites (Doubletree by Hilton)*

MONTREAL/POINTE CLAIRE • April 15 • 10am-5pm Holiday Inn & Suites Pointe-Claire

MARKHAM • April 17 • 10am-5pm Le Parc

VANCOUVER/COQUITLAM • May 29 • 10am-5pm Red Robinson Show Theatre

QUEBEC CITY • September 23 • 10am-4pm

Line of PIM-rated jumpers suit plenum applications Times Microwave Systems line of PIM rated jumper cables includes devices for plenum applications. PIM testing includes the important dynamic testing in order for cables for provide good PIM performance after installation. Products are 100% tested for static and dynamic PIM and verified to provide stable PIM performance prior to shipment. Plenum rated cables need to be UL listed and printed with the UL file number, otherwise a building inspector may not allow them to be installed or may require them to be removed after they are installed. GAP WIRELESS http://ept.hotims.com/51123-113

w w w. e p t . c a

Hotel Plaza Québec

HALIFAX • September 25 • 10am-4pm Dartmouth Sportsplex

FREE Registration online at

www.ept.ca/eptech/

Brookstreet Hotel

MISSISSAUGA • October 30 • 10am-4pm Mississauga Convention Centre

Sponsored by:

electronic products and technology electronic products and technology

OTTAWA • October 28 • 10am-4pm

80 Valleybrook Drive Toronto, ON M3B 2S9 Tel: 416.510.5207 • Fax: 416.510.5134 email: eptech@ept.ca www.ept.ca

TECHNICAL SEMINAR Program at most venues!

electronic products and technology • march-april 2014

Environmental Design

Environmental regulations Determining substances of concern for electronics By Walter Jager, principal consultant, ECD Compliance, Ottawa-based consulting services

Introduction

Environmental compliance is a moving target -- new regulations continue to emerge creating significant challenges for the EEE industry. Substances added twice a year to the REACH SVHC Candidate List, the Denmark phthalates ban and the additional RoHS substances are prime examples of new requirements. The first step in achieving compliance to substance regulations is knowing the substances of concern.

Substances of Concern for EEE

To identify the substances that need to be considered during the design, procurement, and manufacturing of a product, the IEC 62474 declarable substance list (DSL) provides an valuable starting point. It consolidates many of the regulated substances applicable to

EEE, helping companies focus their effort on substances that are most relevant to their products and, thus, avoid effort on low risk substances. For example, many of the current 151 SVHCs are intermediate chemicals which – if fully reacted – should not remain in a finished product. IEC 62474 is an International Standard on material declaration that includes an internationally recognized DSL (based on the Joint Industry Guide (JIG-101)), a material declaration procedure and an XML-schema for data exchange. The JIG-101 was the EEE industry’s de-facto substance list from 2005 through 2012; it was integrated into IEC 62474 to provide broader International acceptance. The JIG-101 document, itself, has not been maintained since 2012 and should no longer be used by organizations. A unique aspect of IEC 62474 compared to most other IEC and ISO standards is that it includes an online database for

the contents of the standard that may need to be updated regularly. The IEC 62474 database is publicly available at http://std.iec.ch/iec62474/

Material declaration

Material declaration is a methodology for suppliers to provide information about the substance and material content of their products. Material declarations can help organizations assess compliance and provide valuable evidence as part of the technical documentation requirement for regulations such as RoHS-2. As an International Standard, IEC 62474 is intended to have a global harmonizing effect. Several jurisdictions (including Europe) have adopted IEC 62474 as a regional/national standard and it is referenced in the RoHS-2 harmonized standard EN 50581. The IPC 1752 and the Japanese JGPSSI and JAMP material declaration systems are leveraging the IEC 62474 specification.

Declarable substances

Figure 1: IEC 62474 DB entry for TCEP

Grow Your Customer Base

12 Million+

Declaration procedure and data exchange

We’ll Help You Get Started CONTACT LISTS ON-DEMAND EMAIL MARKETING SERVICE DATA APPENDS DATA HYGIENE DATABASE MANAGEMENT CUSTOM RESEARCH MARKET INTELLIGENCE REPORT AND MORE...

The IEC 62474 DSL is a list of regulated substances and substance groups (e.g. lead and lead compounds) that a manufacturer should declare to downstream manufacturers if present in the product. The DSL may be accessed from the IEC 62474 database via the menu bar on the left side of the website (Figure 1) – click on “Declarable substance groups and declarable substances” and then select the substance from the drop down list. There is also an option to export the entire DSL. Each substance or substance group entry in the list is accompanied with a reportable application and a reporting threshold level. For example, selecting “Lead/Lead Compounds” presents five entries with different reportable application / reporting threshold combinations – the first entry corresponds to the RoHS restriction. Clicking on the “Details” button reveals information about reference substances; typical EEE applications, regulations, and other information.

1.877.517.6864

solutions@scottsdirectories.com ScottsDirectories.com

IEC 62474 includes a material declaration procedure (rules) and an XML schema for data exchange. The procedure is specified in the document portion of IEC 62464 and the XML schema is available from the IEC 62474 database. A key objective in the development of IEC 62474 was to ensure that the recipient of a material declaration has sufficient information to properly assess the conformity of a material or product – this overcomes a limitation of several earlier material declaration systems. For example, a material declaration that reports only a single ‘highest’ concentration of lead in the product can be deceiving – the highest concentration may be covered by a RoHS exemption, potentially masking a lower concentration of lead in another material.

Declarable substances update

The key challenge with publishing a list of substances is keeping it up to date with environmental regulations. The IEC 62474 DSL is maintained by a Validation Team (VT62474) consisting of 39 representatives from 14 countries, including three representatives from Canada. An evaluation is normally triggered upon submission of a formal change request; however, the VT will also proactively screen new substances added to existing regulations (such as substances being considered for the EU REACH SVHC Candidate List). One of the evaluation criteria that requires significant technical assessment is whether the substance could realistically be present in the product above the regulatory threshold. Updates to the IEC 62474 database content were made in June 2013 and September 2013. Another maintenance cycle was launched in October 2013 and is in final validation. The June and September updates included 35 additions and 10 modifications to the DSL. Most of the updates were the result of additional substances added to the REACH SVHC Candidate List, but there were also a few modifications and a couple of substance deletions. A comprehensive summary of the changes is available at: http://rohs.ca/ IEC62474.html The maintenance cycle that was started in October 2013 is focusing on the REACH SVHCs that were added to the SVHC Candidate List on December 16, 2013. The screening and evaluation phases have been completed and the change requests are in the final validation phase. The update is expected in March 2014.

Summary

Maintaining compliance of products to environmental regulations has become a significant challenge and effort for product manufacturers. Internal processes are needed to identify requirements, obtain information from a global supply chain, assess conformity/risks, and to maintain documentation. This needs to be accomplished efficiently and cost effectively and be flexible enough to accommodate new regulations. Leveraging industry best practices, including the use of risk assessment can be particularly valuable. For substance restrictions and disclosure, identifying the substances of concern that need to be considered during the design, procurement and manufacturing phases of a product is an important and practical first step to help focus the conformity efforts. The DSL included in IEC 62474 provides a convenient starting point for engineering and procurement specifications and helps organizations focus on key substances for market acceptance. The DSL is updated regularly to reflect changing regulations.

For more information on compliance programs to meet global environmental regulations from ECD Technology Ltd., go to http://ept.hotims.com/51123-67

Ref: SMSA34H

full online product listings at ept.hotims.com

Custom Electronic Enclosures &

S h e e t

M e t a l

P a r t s

a n d

C o m p o n e n t s

Built in 2-3 Days | Professional Grade | No Minimum Orders

Announcing Release of Protocase Designer v4.4

Protocase Designer is the easiest and fastest way to design 3D enclosures. We are pleased to announce the latest update to our free custom 3D CAD software, Protocase Designer 4.4. This would be a great time to experience the speed and simplicity of the software as we have added a number of new features to speed up your design process and extend your design options. • Displaying Measurements - Create Custom Brackets - Add both Countersinks and Tapped Holes - Specify Screw Type and Color - Direct Digital Printing and Adding Layers We also make continuous improvements to existing application functionality. Full details & instructions here: http://www.protocasedesigner.com/download.php

Customer Spotlight

Over 7000 customers around the world are using Protocase to manufacture their custom electronic enclosures and components. They range from small startups to major technology companies and research institutions. This means that we get to see a multitude of designs from many areas of technology. We have to admit that we find many of these designs interesting, and, in fact, it wouldn’t be a stretch to say that our customer’s designs are sometimes more interesting than our own work! Thus, we created a “spotlight” section on our website, which will be devoted to sharing some of the creativity that we see within the Protocase community. January’s Spotlight: Nanolumen’s: Innovators of Digital Media See the full article here: www.protocase.com/about/spotlight.php

CHECK OUT OUR FREE DOWNLOADABLE 3D ENCLOSURE DESIGN SOFTWARE The fastest and easiest way to design, price and build custom electronics enclosures.

Fast and Easy Design Instant Price Quotes Buy Your Custom Enclosure Online With 2 - 3 Day Turnaround

www.protocasedesigner.com

Protocase allows you to buy custom electronics enclosures with a whole new level of speed and convenience. Our friendly and knowledgeable sales representatives will be happy to assist you in placing your order.

www.protocase.com info@protocase.com 1.866.849.3911 http://ept.hotims.com/51123-11

electronic products and technology • march-april 2014

Industrial Automation

Software-designed PACs By Brett Burger, Sr. product manager for embedded systems, National Instruments

Think subroutine, not sub controllers

Today’s controls engineers face the pressure to simplify system complexity as they are tasked with increasingly complex challenges. Unfortunately, solutions to these challenges are difficult to clearly define, so overall industrial market trends are instead discussed in an attempt to simplify an industry of escalating complexity. Motors, once viewed as large pieces of iron that would last for decades, are now monitored and scrutinized for the earliest sign of failure or the slightest hint of efficiency loss. Furthermore, control inputs to cutting tools have evolved from the digital ‘cut or stop cutting’ approach to complex vision-guided force-feedback schemes that detect media edges and density, responding with a precise amount of cutting force. These examples support the real need to integrate commercial technology to keep pace with market pressures and increasingly complex control problems. Fortunately, commercial technology continues advancing for control designers. The latest processing technology for PACs is now available with the National Instruments cRIO-9068 software-designed controller. The processing elements of this controller are built on the latest silicon technology from Xilinx known as Zynq. This system on a chip (SoC) combines floating point processing cores, FPGA fabric, and DSP slices on a single chip, which helps control designers collapse advanced machine subsystems into

fewer controllers, creating a more simplified architecture.

Sussing out the appropriate embedded solution This all sounds a bit unfamiliar to control designers who are more familiar with ladder logic than logic gates, but all PACs, PLCs, and embedded controllers contain processing elements. Some even contain FPGAs or ASICs used for signal processing and timing. These different processing elements are analogous to a basic tool such as a hammer. When walking down the tool aisle at the hardware store, a wealth of hammer options hang on the wall. While most of these could be made to serve other hammer functions (e.g. driving nails or breaking apart objects), it’s critical to use the right tool for the job. PC based automation is like a general purpose claw hammer - versatile enough for most applications, but with deficiencies in more advanced operations as it’s too harsh to properly function as a dead blow mallet, too light to act as a sledge, and too small to serve as a good framing hammer. For a broad range of applications, the standard floating point processor is ideal although it falls short with applications that require high-speed timing, triggering or tight latency as this is where an FPGA is beneficial. Floating point processors can also be used for signal and control processing, however these are costly compared to an FPGA or DSP used for

repetitious algorithms. While FPGAs are ideal for processing intensive algorithms, they are limited in runtime flexibility. It’s the combination of all of these processing elements that make new PACs/PLCs and embedded controllers so promising when it comes to simplifying subsystems. At a basic level, subsystems join hardware and software to serve a specific function such as a temperature control system. In this case, the hardware inputs are temperature sensors, the outputs control a fan or heater, and the software logic for the system could range from a simple limit function to a more advanced PID algorithm. In complex machines with multiple components, this temperature controller is a separate design on a custom board that communicates back to the

main controller via a cabled bus. Instead of requiring separate, optimized hardware designs for sub controllers, designers can use newer embedded controllers to more easily rely on a single flexible core.

Achieve a faster time to market

This helps simplify machines with fewer controllers that are software-designed, which makes it possible to achieve a faster time to market at a lower design cost. Subsystems in machines are abstracted as software blocks that can run on the host floating point processor or the available FPGA/DSP resources. Instead of sub controllers, think subroutine. Regarding the hardware, many sub controllers already use modular I/O and the advanced capabilities of new embedded controllers help reduce the need for custom FPGA/ASIC hardware design. This technology is ideal for applications that include any high performance machine paired with multiple sub systems. As an example, a laser saw is used in the process manufacturing of silicon wafers. This commercial technology helps manufacturing engineers’ process silicon wafers with less waste and faster than less advanced mechanical cutters. To do so, these machines feature several New PACs and embedded controllers shift subsystem inter-operating subsystems integration into software design that include separate controllers for temperature control, laser control, high-speed analog input with inline processing and a supervisory PC with an operator interface. Because a communication framework with central control is necessary for all of the sub controllers, today’s machine designers develop a separate design for each sub-system. Using an embedded FEATURED PRODUCTS: controller with the latest processing technology, a control designer can collapse • Global supplier of sensors for mission critical applications. They are an applicaseveral of these sub systems onto a single tions based company that offers great application support for their standard and controller as seen in the image below. custom products The software/firmware instruction set for each controller exists as a self-con• They design and manufacture sensors that measure the following: fluid property, force, humidity, mass air flow, photo tained subroutine on the main controller optic, piezo film, position, pressure, temperature, torque, traffic, ultrasonic and vibration and system designers can expand the system by copying/pasting the appropriate subroutine and adding another I/O module. • Provides a full spectrum of quality products for industrial networking, computing, It’s important to note that high perand automation applications. Their solutions have allowed manufacturers around formance machines are not restricted to the world to connect legacy equipment to modern control systems, conduct real-time monitoring of production facilities the clean environment of wafer manufacin harsh environmental conditions and seamlessly convert between proprietary and open device protocols. turing. Intensive signal processing and • Industrial-Grade rugged Computing solutions for harsh environments. Compact, DIN-Rail mounted, fanless and measurement quality I/O are more prevalent today, especially as it relates to precertified to industrial standards dictive maintenance of heavy equipment. • Industrial-Grade rugged Networking solutions such as Ethernet switches and secure routers. Wireless LAN, Cellular It’s now more intuitive to design these Gateways and Network management software for Edge-to-Core Ethernet-centric architectures systems with off-the-shelf embedded controllers whereas traditionally custom ASIC • Industrial-Grade rugged programmable RTU controllers (C/C++) and remote I/O solutions for front-end data acquisior FPGA/DSP design was necessary. tion and monitoring applications in harsh environments. Regarding motors, predictive maintenance measurements on rotating equipment include RMS calculations and FFTs. Email us at inforequest@jsquared.com with any questions or inquiries continued on page 19 or call us toll free at 1-855-365-2188 for price and availability

www.jsquared.com http://ept.hotims.com/51123-12

full online product listings at ept.hotims.com

http://ept.hotims.com/51123-13

industrial automation

electronic products and technology • march-april 2014

Multi-pin connectors boost operational flexibility, productivity

Ruggedized backplane cable assemblies increase bandwidth, speed

M-Line Multi-Pin Connectors for heavy-duty and hazardous locations up to 600 Vac/Vdc, safely connect and disconnect power, control and instrumentation equipment. Devices help industrial facilities achieve increased operational flexibility and productivity. When used as back-up power connections, products minimize downtime by allowing employees to quickly switch to generator power in the event of a main power failure. When employed in a pilot-plant or small batch process, they enable faster configuration of equipment while eliminating the time and expense of hard-wiring. APPLETON

Ruggedized Backplane Cable Assemblies deliver high-speed data transfer between commercial backplanes or servers, to commercial-off-the-shelf (COTS) connectors including Impact, Impel, VHDM or full military-qualified interfaces. Assemblies reduce high transmission losses caused by long trace lengths on circuit boards and provide data throughput ranges of 2 to 25Gbps depending on the configuration. Optional metal backshells provide 360-degrees Electromagnetic Interference (EMI) shielding and reduce crosstalk at the mating interface for improved system performance. A positive latch feature facilitates a solid connection in shock or vibration situations and provides an intuitive squeeze-and-pull mechanism for ease of use. The blind mate capability allows for misalignment and provides a ‘float’ between mating surfaces. MOLEX

http://ept.hotims.com/51123-68

Rugged switches manage data in harsh environments Firm expands its line of rugged, managed Gigabit Ethernet switches to include managed Gigabit Ethernet switches in 6U VPX (C670), 3U VPX (C680) and XMC (M620) formats. Rugged devices provide reliable operation in all harsh environments across several military, rugged and industrial applications. Each managed switch product supports the same protocols and network services, in addition to a simplified HTML browser-based interface, enabling the user to easily manage the switch’s comprehensive feature set for a better optimized network. AITECH http://ept.hotims.com/51123-69

Rugged connector boosts performance MiniMax Series high density, signal and power in one miniature connector increases the performance of rugged devices, handling more mixed signal and power connections while saving money, space and weight. The first-to-market, high-density miniature solution uses proven technology from the automotive and telecom industry. Device comes as a pre-cabled solution and is suitable for handheld or body-worn applications when space is limited, for instrumentation and for test equipment where user-friendliness and easy of handling are a must. FISCHER CONNECTORS

http://ept.hotims.com/51123-71

Connectors simplify solar installations T4 series of solar connectors has expanded to include tee and cross connectors, designed to simplify PV array wire harnesses. In a system involving parallel connections, each tee and cross connection can be achieved with a single T4 connector. By eliminating the number of connections needed, devices reduce potential points of failure, while saving on both materials and installation time. With a robust design, devices are rated for 30A, with -40C to +85C operation, IP68 rating and UL 1000Vdc and TUV 1500Vdc approvals. GLOBAL PURCHASING SERVICES http://ept.hotims.com/51123-72

Serial adapter controls legacy Android devices ANDROID-232 USB serial interface board controls legacy RS-232 devices directly from modern Android devices. Product uses the Android Open Accessory protocol to convince an Android device that its onboard USB port (normally limited to USB ‘slave’ or ‘OTG’ modes) is actually an RS-232 port. The two way data port allows external hardware to control the Android unit or for the Android unit to control external hardware. Serial data up to 921.6kbps is supported (a max of 115.2kbps without flow control). Onboard circuitry will provide power to charge your Android device while connected. Multiple status and fault LEDs complete the package, and allow simple and convenient confirmation of operational state. ACCES I/O PRODUCTS

http://ept.hotims.com/51123-70

http://ept.hotims.com/51123-73

road trip

USB thermocouple power sensors boost measurement speed To Be Precise. Innovators in Wire Processing

CrimpCenter 36 S

U8480 Series USB thermocouple power sensors comes with improved specifications, including an expanded frequency range to 67GHz and a measurement speed of 900 readings/second. Device’s real-time measurement uncertainty feature reduces overall test time by removing the need for time-consuming manual measurement uncertainty (MU) calculations. Users can compute MU in real time and at any given point. Unit can also display power measurements and MU simultaneously, simplifying test measurement and increasing test accuracy. AGILENT TECHNOLOGIES http://ept.hotims.com/51123-74

High-speed nano-miniature connector withstands harsh conditions

High speed fully automatic crimping machine that efficiently cuts, strips and terminates a wide range of wire types and sizes. n Compact Modular Design n Wire cross sections from 26 - 12 AWG n Great flexibility with up to 6 processing stations n High end components for highest precision n Easy operation with touchscreen and icon-based EASY software n Simple network integration with standard TCP/IP

CeeLok FAS-T nano circular, rugged I/O connector is capable of meeting 10 gigabit Ethernet performance. Device’s noise-cancelling contact configuration minimizes crosstalk with its T-shaped pin pattern. Product’s ergonomic design requires less weight and bulk. Available in board-mount and cable-applied versions with quick disconnect or threaded coupling options, devices are available in corrosion-resistant nickel-plated aluminum or stainless steel. TE CONNECTIVITY http://ept.hotims.com/51123-75

Schleuniger, Inc. | Oakville, ON | (905) 827-1166 | www.schleuniger-na.com/cc36s_ept

http://ept.hotims.com/51123-14

full online product listings at ept.hotims.com

Great Minds Need Great Products

Allied Has What You Need in Automation and Control

1.800.433.5700 © Allied Electronics, Inc 2014. ‘Allied Electronics’ and the Allied Electronics logo are trademarks of Allied Electronics, Inc. http://ept.hotims.com/51123-15

An Electrocomponents Company.

industrial automation

electronic products and technology • march-april 2014

45 degree angled D-sub cable assemblies suit confined designs

High-speed, rugged rackmount and portable recorders reproduce IF signals

Line of 45-degree angled D-Sub cable assemblies suitable for use in enclosures, cabinets or other confined applications where straight or 90-degree D-Sub connectors will not fit. The rugged cable assemblies provide a standard D-Sub connector on one end and a 45-degree left or right exit D-Sub connector on the other end. Devices are available in DB9, DB15 and DB25 sizes, in various lengths and each series provides two angle options. Custom versions can be manufactured with modest minimum requirements. L-COM

Talon Model RTR 2728 rugged portable and Model RTR 2748 rugged rackmount high-speed turnkey recording systems use state-of-the-art SSD (solid state drive) storage technology to achieve aggregate recording and playback rates up to 4 GBytes per second. Units are suitable for recording and reproducing wideband IF signals at sample rates up to 1 GSamples/ sec. Systems are built on a Windows 7 Professional workstation with an Intel Core I7 processor and provide both a GUI (graphical user interface) and API (application programmer’s interface) to control the system. Signal analysis tools are also provided to allow the user to monitor and analyze signals prior to, during and after a recording. PENTEK

http://ept.hotims.com/51123-76

Cord retaining clip supports IEC C8 appliance inlets Cord retaining system clip for IEC C8 inlets and mating cord sets provides specially adapted retaining clips for C8 type inlets. Devices fit firm’s series 2576 flange mount and 2578 snap in mount inlets. Device can save up to 34% of space compared to the C14/C17 inlet with wire-bail system and therefore allows for equipment downsizing, depending on the power requirements of the application. Product improves efficiency, with only one screw required to fasten it to the panel. SCHURTER

http://ept.hotims.com/51123-79

Stainless steel display withstands all manufacturing environments ADM-5800AX Stainless Steel Display Series withstands all manufacturing environments types, meeting NEMA 4X requirements. Product’s stainless steel enclosure is waterproof to protect components inside, so dust, water or high pressure spray do not wear it out. Products all provide touch capabilities, utilizing a 5-wire resistive touch screen. In situations where you have high ambient light on your plant floor, unit’s resolution can be upgraded to very high bright up to 1,000 NITS giving you clear readability. Product comes in various sizes, ranging in 15”, 17”, 19” with a 4:3 aspect ratio and a 42” with a 16:9 wide format aspect ratio with full HD capability. ARISTA

http://ept.hotims.com/51123-77

Transponder coils serve receiving LF antennas KT11835 and KTZ1030 receiving transponder coils for low frequency antennas provides precision tolerances of ±2%, 3% or 5%, inductance at 125kHz between 1mH~12mH (KT11835) or 1mH~7.6mH (KTZ1030), and an operating temperature range between -40C to 125C. Product’s construction arranges the electrode in the long side of the body, covered with molding resin. Because neither the electrode nor the land pattern disturb the coil flux, both units provide improved sensitivity up to 75mV/µT in low frequency around 125kHz. KOA SPEER ELECTRONICS

http://ept.hotims.com/51123-81

Product prevents water from entering cable core Dual Block product provides a dual water blocking capability on Hendrix primary, underground cable. Product prevents water from entering cable core as a fill compound is continuously applied into the conductor interstices. This prevents longitudinal water migration. A water-swellable powder is applied under the polyethylene jacket, preventing water from migrating along the neutral wires, under the jacket. HENDRIX

http://ept.hotims.com/51123-82

Stripping machine handles semi-rigid coaxial cables SemiRigid 1050 stripping machine for semi-rigid coaxial cables is a highly specialized machine for stripping aluminum or copper jacketed semirigid coaxial cable. Unit processes cables with outer diameters ranging from 0.86mm (.034”) to 4.5mm (.177”). Product can be programmed to perform a one or two step strip, with or without pointing of the center conductor and/or for stripping and pointing of the inner conductor on cables with soldered connector already in place. Easy to use machine provides a color touchscreen user interface. SCHLEUNIGER http://ept.hotims.com/51123-80

Carling Technologies Introduces The New Rotary &

http://ept.hotims.com/51123-78

Miniature pressure sensor eliminates zero shifts XP5 rugged miniature pressure sensor with SanShift technology eliminates zero shifts caused by installation torque. Device provides a body and flush diaphragm constructed of titanium and is laser welded for increased durability. A temperaturecompensated Wheatstone bridge with high stability micro-machined silicon strain gauges makes up the core sensing technology of the device. Product can be used in both static and dynamic applications, and is available in absolute, sealed and gauge configurations from 1 bar to 70 bar, with a sealed format available up to 350 bar. Sealed Toggle Switches MEASUREMENT SPECIALTIES http://ept.hotims.com/51123-83

ConExpo Las Vegas March 4-8, 2014 • South Hall 3-4 Booth: 84124 V-Series Contura Rotary

ST-Series Sealed Toggle

Featuring an innovative mechanism design that translates rotary to linear motion; a secondary CAM which provides up to 3 detent positions; and a PC Board supporting up to 3 LEDs and surface mount resistors. Stem and LEDs seals provide IP67 protection. SEALS

LEDs

PC BOARD

ROTARY TO LINEAR ACTUATOR

IP67 sealing built through the combination of terminal seals along with a bushing and seal assembly which solidly mates with a dedicated channel in the switch base. A brass roller pin provides rolling metal on metal actuation for maximum durability. PIN TOGGLE/BUSHING

SECONDARY CAM

OPTIONAL O-RING

BRASS ROLLER PIN

BASE SEAL CHANNEL

BUSHING/TOGGLE SEAL

TERMINAL BARRIERS

TERMINAL SEALS

Industrial 18.5” TFT suits kiosk applications OSD185T1854-58 – Rev C3A TFT-LCD kiosk display measures 18.5” diagonal and provides white LED backlighting, 1366xRGBx768 pixel resolution and sidemount frame locations. Module outline of 430.37 x 254.60 x 9.9mm is robust and durable and provides sufficient bonding area for optional touch panels or protective overlays. Product provides 16.7M color depth with 3H anti-glare surface treatments. Unit provides viewing angles of 170-degrees horizontal & 160 degrees vertical, while delivering a 30k hrs backlight (rated from 100% to 50% brightness decay). OSD DISPLAYS http://ept.hotims.com/51123-84

60 Johnson Avenue, Plainville, CT USA 06062 • (860) 793-9281 sales@carlingtech.com • www.carlingtech.com http://ept.hotims.com/51123-16

full online product listings at ept.hotims.com

industrial automation

electronic products and technology • march-april 2014

Wire cut, strip machine boosts processing efficiency EcoStrip 9300 automatic cut and strip machine is economic and efficient, capable of processing a wide range of applications. The all-electric unit provides high productivity and the high stripping quality, efficiently and precisely processing round cables and wires up to 6mm (0.235”) outer diameter and flat ribbon cables up to a width of 13 mm (0.511”) with a stripping length up to 999.9 mm (3.28 ft). SCHLEUNIGER

Monolithic ceramic capacitors boost performance in miniaturized package RCE Series monolithic ceramic capacitor (MLCC) line provides radial, lead and halogen-free solution that complies with AEC-Q200 requirement and the ISO7636-2 surge test. Measuring 3.6x3.5-7.7x13mm, product series has a rated voltage of DC25V – 1kV, a capacitance range of 1.0pF - 22µF, and an operating temperature range of -55C to125C. Product smoothes power and removes noise while simultaneously protecting the sensor against surges. MURATA AMERICAS

http://ept.hotims.com/51123-85

http://ept.hotims.com/51123-88

Hazardous area encoder boosts versatility 78E Series Ex Encoder with ‘flameproof enclosure’ provides ATEX and IEC Ex international approval in addition to thirdparty approval by TÜV. Suitable for use in hazardous areas, product is available in wide range of interfaces, including SSI, CANopen, DeviceNet or PROFIBUS. Device has a removable cover that allows easy configuration and connection to a PLC. PEPPERL+FUCHS http://ept.hotims.com/51123-86

Non-volatile EEPROM withstands extreme temperatures High temperature non-volatile memory, Electrically Erasable Programmable Read Only Memory (EEPROM) is designed for implementing well monitoring and measurementwhile-drilling (MWD) data storage can withstand temperatures 250C and above. Device withstands challenges of extreme heat and data retention. Product can be programmed and erased across the full operating temperature range. If system operation requires an update in the software or configuration data, device can be rapidly programmed and erased in circuit for reprogramming without removing from the circuit board. HONEYWELL http://ept.hotims.com/51123-91

Software-designed PACs Sine wave inverter delivers 3-phase 1000VA output

continued from page 14

These algorithms consume CPU resources that increase with channel count, which leaves fewer CPU ‘reserves’ for other tasks and either limits the capability of the controller or increases its cost. Moving these processes to a combination FPGA/ DSP processing unit eliminates some of the workload on the flexible CPU and improves data throughput, as FPGAs handle multiple processes more efficiently. While FPGAs contain fixed space, they feature the nearly unlimited capability to add parallel processes within this set space. As shown with the previous analogy, using a claw hammer for demolition can work, but at some point a sledge hammer is more appropriate as it offers increased efficiency.

Design focus switching to software With some of the design focus switching to software, it’s important that software tools are available to make use of available processing technology. The most common programming standard for PACs/PLCs is some form of IEC 61131. The 61131 is an abstract language that focuses on sequential, digital heavy process and control, but it is not designed to handle advanced programming or to target FPGA/DSP fabric. Many advanced control designers look to a standard programming language such as C for embedded design and although C can handle nearly any task or processing target, it’s a low level language that requires more expertise and time to implement a subroutine design. Other programming environments exist in the space between. As an example, NI LabVIEW system design software offers a balance between these two software environments, as it can simplify the programming process including memory handling, threading, and core management, while offering low level access to processing and I/O elements on the core or FPGA fabric. Programming syntax aside, ensuring system designers’ access to commercial technology is essential to overcoming increasingly complex challenges, such as changing standards and the pressure to innovate faster at a lower cost. In the end, processing elements are not beneficial to the designer if there is no way to program them. Many of the processing elements and firmware available on today’s advanced control systems are locked down or unaccessible. The more open an embedded controller is, the easier it is for control designers to merge these complex machines into fewer subsystems. As an example, PACs/PLCs with

modules that measure waveforms and output only post-processed values or PID ‘control chips’ include hard coded logic. These designs are cheaper from a hardware cost to implement, but do not provide the designer with flexibility to debug or modify the locked down processing firmware. Also, when these components go end of life (EOL) it can be difficult to replicate the exact algorithms, resulting in many potential problems. The new cRIO-9068 controller (see figure below) exposes the floating point processor, the FPGA fabric with DSP slices, and even the operating system, which is a real-time version of Linux. With shell access, designers can tap into the vast Linux community to get a machine up and running in less time and with fewer resources. In addition to off-the-shelf Linux applications, control designers can reuse existing code in C as the new floating point processor supports both LabVIEW software and the Eclipse development environments. Offering the best of both worlds, users can deploy existing software on the latest hardware with the least disruption.

CTP 1K series of rugged modular dc-ac inverter systems employ microprocessor controlled technology to deliver 3-Phase 1000VA output power with pure sign wave output voltage. Suitable for industrial applications, products provide 3-phase outputs of 208Vrms, 380Vrms or 400Vrms (line-to-line) at frequencies of 400Hz, 60Hz or 50Hz. Phase-to-neutral voltages of 115Vrms, 220Vrms or 240Vrms can also be used. Units operate from dc voltages of 24V, 48V, 110V or 125Vdc. ABSOPULSE ELECTRONICS http://ept.hotims.com/51123-90

Linear position sensors expands sensing capability LV-45 series linear position sensors can withstand the high vibration and severe shock environment, as well as extremes of temperature and humidity found in most outdoor applications. Device uses a proprietary inductive technology that allows it to replace traditional DC-LVDTs in most applications. Its simple coil design permits the sensor to be both shorter and more rugged than its DC-LVDT counterpart while operating over a wider temperature range. Product is available with optional mounting flanges, rod eye ends, connector or cable terminations and a captive connecting rod assembly that cannot break loose. ALLIANCE SENSOR GROUP http://ept.hotims.com/51123-89

Only trust a reliable, time-tested solution for your design The NI cRIO-9068 adds unique processing elements for timing, high-speed control, and signal analysis to the traditional floating point processor.

With industries such as steel milling, textiles and semiconductor, the need for smarter machines is driving the demand for improved machine control design technology. PACs and embedded controllers using the latest hybrid processing technology can help advance and simplify machine design by shifting the architecture from several unique PACs/PLCs or custom designs to fewer, more consolidated software-designed controllers. The next generation of embedded controllers will not replace many of the old stalwarts of the process world. Rather, these controllers are ideal for the next generation of smart machines and are best suited for more advanced designers looking to get to market faster with a more simplified architecture. For more information on softwaredesigned PACS from National Instruments, go to http://ept.hotims.com/51123-87

Space Saving

Multiple Housings

Easy Connections

Time tested solutions for whatever you design. HARTING, first established in 1945, delivers unrivaled reliability, efficiency, performance and innovation. With HARTING you have a partner who ensures you dependable connections that stand the test of time. www.HARTING.ca http://ept.hotims.com/51123-17

w w w. e p t . c a

electronic products and technology • march-april 2014

Switches & Circuit Protection Sealed toggle switch complies with MIL-DTL-3950G requirements

Tamper-proof switches detect interlocking, movement MS Series subminiature snap-acting switch provides detect interlock and movement functionality, as well as different lever and operating force options. Reliable devices provide tamper-proof performance, preventing meter fraud and ensuring system integrity. RoHS-compliant devices have a mechanical operating life of one million cycles and provide a contact rating of 5A @ 125Vac, contact resistance of 100m ohms (maximum), insulation resistance of 100M ohms (minimum), and dielectric strength of 1000Vac (minimum). C&K COMPONENTS

ST-Series Sealed Toggle Switch provides innovative toggle seal composed of dynamic silicone material that bonds to the metal toggle, pin and bushing, providing ideal sealing and protection against the environment, vibration and shock, while withstanding extreme temperature variations. Device also utilizes up to three terminal seals per pole and an optional O-ring assures additional under panel sealing protection. All silicone seals comply with A-A-59588 for silicone rubber performance specifications and meets the international IEC 60529 standard for sealing performance to an IP68 level. CARLING TECHNOLOGIES http://ept.hotims.com/51123-92

Mini PECL and LVDS oscillators meet low jitter needs LV5 and PE5 series of LVDS and PECL oscillators are suitable for communication systems where low jitter and small size are required by chipset suppliers and system architecture. Devices are in a miniature 3.2mm x 5mm ceramic package and available in frequencies up to 200MHz. Products are available in standard commercial and industrial temperature ranges from -40 to +85C. Stabilities can be held down to +/-25ppm (depending on temperature range). The integrated jitter on these products is typically 0.2pS (LV5) and 0.3pS (PE5) over the telecommunication industry standard carrier offset of 12kHz to 20MHz. PRECISION DEVICES

http://ept.hotims.com/51123-96

Hall effect sensor coded switch withstands harsh environments X4 family of rugged switches based on the latest Hall Effect sensor coding technology, provides enhanced reliability and performance where conventional switches would not survive, such as in the presence of dust and/or vibration. Device provides a 5-bit gray code output with 12 or 24 positions for improved resolution, as well as parallel analog and PWM outputs. Device is available in two indexing angles, either 30 or 15 degrees. Selectable switching torque, from 1.5N cm to 20N cm, is available and the indexing mechanism itself boasts a life of up to 100,000 switching cycles. ELMA

http://ept.hotims.com/51123-93

Transmitters accept resistance input from potentiometer DMD4008 series of transmitters accepts a resistance input from potentiometer, slidewire, linear position, displacement, or rotational devices and provides an optically isolated dc voltage or current output that is linearly related to the potentiometer position. Device is a quick setup for hundreds of I/O ranges, features external switches and table for range selection, has removable plugs for fast installation with a functional output test button and selectable sink/source for current output. OMEGA http://ept.hotims.com/51123-94

T9-818

Thumbstick switch with threaded metal body permits quick drop-in panel mounting TS Series Thumbstick switch may now be specified with a black oxide coated brass threaded D-flat housing, making for simplified drop-in panel installation. Device’s threaded metal body provides full EMC protection; including EMI, ESD and is environmentally sealed up to IP69K. Mounting accessories for the housing option include a stainless steel lock washer and hex-nut. APEM

http://ept.hotims.com/51123-97

Digital Hall effect sensors are factory programmable

MLX92231 and MLX92211 programmable digital Hall effect sensors provide EEPROM memory, allowing magnetic switching thresholds to be configured (including hysteresis). Both are factory pre-programmed to precise Hall effect switch or latch specifications, bringing tailored results that match the customer’s specific application requirements. Constructed on a proprietary mixed signal CMOS process technology, devices integrate a Hall sensor element with advanced offset cancellation http://ept.hotims.com/51123-95 mechanism, a voltage regulator and an opendrain output driver in industry standard 3-pin SIP andAdTSOT23 The programmable EP&T Ad Electronic 1/4pg 2014.qxp_EP&T Electronicpackages. 1/4pg 2014 1/27/14 5:36 AM Page 1 architecture enables high accuracy switching thresholds and an integrated factory programmed thermal compensation value to be set. circuit MELEXIS

First of its kind breaker for PCB mounting

http://ept.hotims.com/51123-98

Miller-Stephenson Offers a Wide Range of Chemicals for the Electronic Industry • Flux Removers

• Solvent Cleaners

• Contact Cleaners

• Vertrel ® Solvents

SCHURTER introduces the T9-818 to complete its family of fuseholder style circuit breakers - PCB terminals allow for easy assembly - Small 7.9 mm panel opening minimizes protrusion of reset button through the panel - T9 series includes 4 mounting types: front and rear snap-in panel, rear mount threaded neck, PCB - 3-15A @ 240 VAC; 48/32 VDC - cURus, VDE and CCC approved schurter.com/new_cbes http://ept.hotims.com/51123-18

• Aero-Duster®

• Quick Set Adhesive Kits • Freeze Spray

• PTFE Release Agents • Connector Lubricants • DuPontTM Krytox ® Lubricants • Conformal Coatings Low Global Warming Formulations and nPB & HCFC 225 Replacements Available!

miller-stephenson chemical company, inc. Toronto, Ontario Canada 800.323.4621 Technical Service miller-stephenson.com supportEPT@mschem.com

DuPont™, Krytox® and Vertrel® are registered trademarks of E.I. du Pont™ de Nemours and Company or its affiliates.

Controls catalog app now available for iPad iPad version of firm’s Controls Catalog provides easy access to most current version of firm’s catalog and includes easy to use features such as search, favorite, print and build a part. Instructions and features are available on YouTube and can be found by searching ‘ottoexcellence app’. Easy to understand and navigate, the app can be downloaded for free from the Apple App store. OTTO ENGINEERING http://ept.hotims.com/51123-99

http://ept.hotims.com/51123-19

full online product listings at ept.hotims.com

switches & circuit protection

electronic products and technology • march-april 2014

Compact thermal circuit breaker protects equipment CLB-Series Thermal Circuit Breakers are compact, single pole, pushto-reset while protecting equipment, with ratings from 3 to 60 amps, plus a variety of bushing and termination options. Utilizing simple, precision design with few moving parts, devices provide cost effective, extremely reliable circuit protection with high resistance against shock and vibration. Product provides a consistent trip point over temperatures ranging from -10C to +60C. CARLING TECHNOLOGIES http://ept.hotims.com/51123-100

Surge protection tester protects critical RF equipment Times Microwave Systems TimesProtect LP-SPT RF provides the user with the capability to test any lightning protection device or component to ensure its proper functioning and capability to protect critical and expensive RF equipment. Suitable for field use, the ruggedized hand-held unit is completely portable, weighing 16 ounces and powered by two 9 volt batteries. Measuring 9” x 4” x 1-1/2”, the slim unit has two terminals, N male and N female, to support testing of the most popular in line RF surge protection devices and can easily test surge protectors with any other interfaces by using commonly available RF adaptors. GAP WIRELESS http://ept.hotims.com/51123-101

Circuit breaker with antimicrobial cover shields patients TA35 thermal circuit breaker comes with an antimicrobial protective cover, making it suitable for medical applications. Device’s cover has been tested and confirmed to be antibacterial effective according to ISO 22196, particularly in protecting against the growth of the bacteria strains. The silver ions contained in the cover material prevent the growth of numerous other organisms. Device has an ingress protection rating of IP 65, and withstands the use of common cleaning agents and disinfectants. SCHURTER http://ept.hotims.com/51123-105

Sealed rocker switch delivers IP67 ratings, LED illumination R7 series rocker switch provides an ergonomic, panel mount design and offers solder, screw or faston termination options. Device provides an array of actuator styles, multiple functions and red, green & amber LED colors. IP67 rated to the front panel, device provides a contact rating of 20(8)A @ 125/250Vac, 50/60Hz, µT55. Device is suitable for transportation equipment, industrial machinery, marine and boating, and others. E-SWITCH http://ept.hotims.com/51123-106

Surge protector provides true CAT6 performance SurgeGate CAT6 RJ45 4-Pair surge protector is tested to meet or exceed CAT6 standards for signal integrity and featuring solid state technology for enhanced surge protection and industry-leading response time. Device provides improved protection for technologies using 10G Base – T Ethernet connections and features patented circuitry allowing the protector to provide an improved response time to capacitance ratio. Through the use of solid state technology, product ensures enhanced safety and a response time of 2-5 Nanoseconds, representing up to 2500% faster than the clamping speeds obtained with older gas-tube technologies. ITW PHOTONICS GROUP

http://ept.hotims.com/51123-102

Resettable fuse enhances system reliability NIS5132 resettable electronic fuse raises power system reliability by protecting against shutdown and catastrophic failures. By allowing a product to restart, the device enables a reduction in unnecessary field returns. Operating over a wide input voltage range from 9V to 18V, and provided in the small, low-profile DFN3030-10 package, the 3.6A rated device integrates a low onresistance NMOS buffer and an internal current limit. With the buffer’s typical RDS(ON) of only 30mohm and with no need for an external sense resistor in the load path, the device minimizes voltage drop and power loss. DIODES

ESD protectors guard automotive electronics ChipGuard CGA-MLC Series ESD protectors guard sensitive automotive electronics from the threat of electrostatic discharge (ESD) and are qualified to meet up to IEC 61000-4-2 Level 4 standards. The extremely fast bidirectional devices have low capacitance, minimal insertion loss and low leakage over a wide temperature range. Devices are available in ultrasmall, industry standard 0402 and 0603 packages. Devices are an ideal protection solution for a large range of automotive applications including antenna circuits, camera links, sensors, touchscreen interfaces, GPS systems, USB 3.0 devices and high-speed communication buses. BOURNS http://ept.hotims.com/51123-107

Hall-Effect sensor ICs simplify installation SS360PT and SS460P high sensitivity latching Hall-Effect sensor ICs with builtin pull-up resistors are high performance and well-suited for demanding, high-volume applications. Devices provide reliable switching points with a high magnetic sensitivity of 30 Gauss typical, at 25C, and 55 Gauss maximum over the full -40C to 125C temperature range, allowing for the use of smaller magnets or a wider air gap. Devices do not use chopper stabilization on the Hall element, providing a cleaner output signal and a faster latch response time when compared to competitive, chopper-stabilized, high sensitivity Hall-effect bipolar latching sensor ICs. HONEYWELL SENSING AND CONTROL http://ept.hotims.com/51123-108

Wireless, digital switches/sensors suit multiple applications Family of wireless, industrial-grade digital switches and sensors include limit, magnetic, inductive, foot,-operated, pull-wire, pushbutton, selector, and key-operated designs. Contact types provide an internal energy generator for battery-less operation. Non-contact types feature long-life batteries. Designed to operate at 915MHz, each device is CSA, FCC and IC-certified. Devices provide a life expectancy in excess of 1-million operations and an IP65 rating. STEUTE INDUSTRIAL CONTROLS http://ept.hotims.com/51123-109

CUSTOM CONTROL SOLUTIONS

http://ept.hotims.com/51123-103

• CONSTRUCTION • FORESTRY • INDUSTRIAL • MILITARY

Anti-surge resistors come in 1/4W body size ASRM14 anti-surge metal film resistors have a mini ¼ watt body size and provide a max working voltage of 500 volts, overload voltage of 1000 volts and capacitor discharge surge withstanding up to 2000 volts 10 times. Device delivers single square pulse handling that is more than three times better than comparably-sized metal film resistors. Products are lower cost replacements for ceramic composition and carbon composition resistors. STACKPOLE ELECTRONICS http://ept.hotims.com/51123-104

http://ept.hotims.com/51123-20

w w w. e p t . c a

ProductSource

electronic products and technology • march-april 2014

product source feature product source feature product source feature New 2638A Hydra Series III Data Acquisition System/Digital Multimeter Price-performance breakthrough in a stand-alone data acquisition system. DC measurement accuracy of 0.0024%, basic 0.5°C thermocouple accuracy, full-color display, easyto-use menu system and industrial safety ratings put it in a category of its own as a precision data acquisition system, plus it has a dedicated 6.5 digit digital multimeter (DMM) mode for added utility and value. FLUKE CALIBRATION www.flukecal.com

B&E Electronics Ltd. since 1975 has offered a full range of products required for the electronic maintenance and manufacturing industries. • electronic components & equipment • test equipment • wire and cable • batteries, power & protection products • electronic chemicals • tools and cases B&E Electronics is a founding member of EDGE Marketing, a North American buying group of independent electronic distributors.

OrCAD is the #1 Choice for Schematic Capture Cadence® OrCAD® Capture® represents the industry standard in schematic design. From complex multi-gigabit networking systems to the electronics powering LED lighting, OrCAD Capture is the tool of choice for defining PCB logic. Join the tens of thousands of engineers that depend on OrCAD Capture daily for their schematic capture needs.

www.be-electronics.com

EMA DESIGN AUTOMATION www.ema-eda.com/Capture

Head Office: B&E Electronics Ltd. 444 Manitou Road SE, Calgary, AB T2G 4C4 • Tel: 800.661.5619

Toll Free: 800-363-5853

info@ema-eda.com

Branches: Regina: 800.667.3528 • Saskatoon: 888.249.5144

http://ept.hotims.com/51123-21

Low Viscosity Toughened Epoxy Two Component EP21FL • Withstands rigorous thermal cycling • Electrically insulative • Excellent for potting • Long working life

www.masterbond.com

MPS Half Bridge LLC Resonant Transformers In today's energy conscious environment, electronic product manufacturers are focused on efficiency and faced with the difficult task of improving performance while consuming less power. To assist our customers, MPS Industries introduces two new LLC Resonant transformers that are designed to provide very high efficiency and very low power loss. MPS INDUSTRIES http://mpsind.com/MPS-pages/ MPS-press/llc-resonant-transformers-press.html Contact email: sales@mpsind.com

http://ept.hotims.com/51123-24

Highly Specialized Stripping Machine for Semi-Rigid Coaxial Cables

The innovative LP-SPT™ RF surge protection tester can test any lightning protection device or component to ensure its proper functioning and capability to protect critical and expensive RF equipment. Weighing only 16 ounces and powered by two 9 volt batteries, the ruggedized hand-held unit is completely portable making it ideal for field use.

New SemiRigid 1050 strips aluminum or copper jacketed semi-rigid coaxial cable. Easy to use unit handles cables with outer diameters ranging from 0.034” to 0.177”. Machine can be programmed to perform: n A one or two step strip, with or without pointing of the center conductor n Stripping and pointing of the inner conductor on cables with soldered connector already in place.

GAP WIRELESS www.gapwireless.com

SCHLEUNIGER

http://ept.hotims.com/51123-27

ADVERTISERS’ INDEX Active Tech Electronics Canada . . . . . . . . . . . . 4 Agilent Technologies Canada Inc. . . . . . . . . OBC Allied Electronics, Inc . . . . . . . . . . . . . . . . . . 17 Avnet Electronic Marketing . . . . . . . . . . . . . . . 5 B&E Electronics . . . . . . . . . . . . . . . . . . . . . . 22 Carling Technologies Inc. . . . . . . . . . . . . . . . . 18 Conec Corp. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Digi-Key Corp . . . . . . . . . . . . . . . . . . . . . . . . IFC EMA Design Automation . . . . . . . . . . . . . . . . 22 EMX Enterprises Ltd. . . . . . . . . . . . . . . . . . . . . 6 Fluke Calibration . . . . . . . . . . . . . . . . . . . . . 22 GAP Wireless . . . . . . . . . . . . . . . . . . . . . . . . 22 GlobTek . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hammond Mfg. Co. . . . . . . . . . . . . 7 (insert), IBC Harting Inc of North America . . . . . . . . . . . . . 19 J-Squared Technologies . . . . . . . . . . . . . . . . 14 Master Bond Inc . . . . . . . . . . . . . . . . . . . . . . 22 Mega Electronics Inc. . . . . . . . . . . . . . . . . . . 10 Miller-Stephenson Chemical Co. Inc. . . . . . . . 20 MPS Industries . . . . . . . . . . . . . . . . . . . . . . . 22 Murata Power Solutions . . . . . . . . . . . . . . . . . 8 Orion Fans . . . . . . . . . . . . . . . . . . . . . . . . . . 22 ODU USA Inc. . . . . . . . . . . . . . . . . . . . . . . . . 15 Otto Engineering . . . . . . . . . . . . . . . . . . . . . . 21 Pioneer Magnetics . . . . . . . . . . . . . . . . . . . . 22 Protocase . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Schleuniger . . . . . . . . . . . . . . . . . . . . . . . 16, 22 Schurter Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 20 TDK- Lambda Americas Inc. . . . . . . . . . . . . . . . 9

IP55-rated Fan Specialists Orion Fans offers a select series of DC and AC fans with an IP55 rating for protection from dust and jet spray in ● ● ● ●

HVAC Industrial machines Wind power Telecom

ORION FANS

http://ept.hotims.com/51123-25

Times Microwave : LP-SPT™ RF Lightning Protection Tester

Tel: 855.826.3781 • info@gapwireless.com

http://ept.hotims.com/51123-23

http://ept.hotims.com/51123-22

We’ll Make You a Fan 214.340.0265 orionfans.com

http://ept.hotims.com/51123-26

www.schleuniger-na.com (603) 668-8117 http://ept.hotims.com/51123-28

http://ept.hotims.com/51123-29

newswatch

Active Tech re-focuses with new business model As the exodus of electronic contract manufacturers and R&D firms continues from North America, it would seem that the marketplace for electronic distribution as a consequence appears bleak. Well, for one firm pursuing a new business model – Active Tech Electronics Canada Inc., Richmond Hill ON, has prospered given its new perspective. Previously flagged as Active Electronics and operating as a national electronics distributor, the firm was recently acquired by Active Tech Electronics Canada and quickly determined that the distribution marketplace had changed. Acting on its findings, the repositioned concern forged a dynamic business plan, focused on the demographic shift in users, technology trends going forward, industry and educational transformation, client valuation of the distribution chain and of the customer experience specifically. Active Tech made another logical step in ensuring its continues on the right path as it appointed industry veteran of 30-years Elci Gos, to the position of general manager of sales. “Elci has brought a whole new perspective to our company and is bringing exceptional differentiated value to new clients and our present client base. He has a wealth of experience and brings a fresh and thoroughly researched perspective to our client’s needs” says Andrew Roberts, president of Active Tech Electronics Canada. Shortly after being hired, Gos relocated the firm’s Toronto location into a sales office in Richmond Hill.

“For some time now the growth of online electronics sales has been growing. We needed to harness this behaviour in a specific way as one facet, to aid in the growth of our business” says Gos. “Active Tech Electronics Canada is growing. The foundations are being set for the next cycle of electronic clients and we are well on our way to build upon these foundations” Gos adds.

PEOPLE • Electronic components distributor Allied Electronics Canada has appointed Duane Booth to the position of territory manager, responsible for the Toronto and SW Ontario territory for the large industrial / automation market-focused distributor. • Toronto-based Tectrol Inc. has appointed Rick Vandermolen to the position of regional sales manager. Tectrol specializes in designing and manufacturing standard and custom power supplies and solutions. • Ottawa-based manufacturers’ representatives J-Squared Technologies Inc. has added two new people to its team, including Karen Wyad as VP business development in its Montreal office and Peter Campbell to the position of VP product marketing at the Toronto location.

full online product listings at ept.hotims.com

http://ept.hotims.com/51123-32

http://ept.hotims.com/51123-30

http://ept.hotims.com/51123-33

http://ept.hotims.com/51123-31

http://ept.hotims.com/51123-34

http://ept.hotims.com/51123-35

No other oscilloscope can touch it. But you can.

The oscilloscope experience redeﬁned. Agilent 4000 X-Series Oscilloscopes

Agilent 3000 X-Series Oscilloscopes

200 MHz to 1.5 GHz

100 MHz to 1 GHz

Starting at $5,611*

Starting at $3,222*

12.1” capacitive touch display

8.5” display

InﬁniiScan Zone touch triggering

—

1M waveforms/sec update rate

Fully upgradable: bandwidth, MSO, dual-channel WaveGen, DVM, serial analysis including USB

Fully upgradable: bandwidth, MSO, WaveGen, DVM, and serial analysis

* Prices are in USD and are subject to change

Scan the QR code or use the Layar app to see a video

866-436-0887 www.microlease.com/agilent

Experience the difference. Get time-saving app notes. www.microlease.com/Agilent/scope

http://ept.hotims.com/51123-36