®
2002 Brittmoore Road Houston, Texas 77043-2209
Buffalo Forge Steel Doors® Product Guide Effective January, 2015
This guide includes the following information: • Product specifications for Buffalo Forge Steel Doors® • Glass options • Product section views
Contact Us
Hours of Operation
1-800-766-2196 — National Toll-Free 1-713-69 0-8282 — Local Sales Accounting
1-713-690-2919 1-713-690-9994
E-mail: sales: doorsales@glasscraft.com customer service: orderentry@glasscraft.com accounting: accounting@glasscraft.com marketing: marketing@glasscraft.com Fax: 713-690-2919 Web site:
Monday through Friday Eastern 9:00 am – 6:00 pm Central 8:00 am – 5:00 pm Mountain 7:00 am – 4:00 pm Pacific 6:00 am – 3:00 pm You are welcome to visit and tour our 185,000 square foot glass and door facility. Please call first, prior to your visit. Weekday hours are listed above. Should you wish to pick up your order, please call to confirm that the order is available for loading prior to your arrival.
www.glasscraft.com
Order Forms and Quotation Forms
D AMD
MEMBER
are on-line at www.glasscraft.com under the “CUSTOMER SERVICE” window... then in the “SERVICE CENTER” area. ®
This catalog is © 2015 GlassCraft® Door Company, Houston, Texas. No reproduction of any design, drawing, or any other graphic image from GlassCraft Door Company is allowed without specific approval in writing from GlassCraft Door Company. Pricing and product information/specifications may change without notice.
Product Specifications for Buffalo Forge Steel Doors® Series All entryways for this product line are completely assembled in steel wall bucks prior to shipment in order to ensure accurate and consise assembly. We photograph each unit prior to shipment in order to record the quality of the construction. Doors built for the Buffalo Forge Steel Doors® Series program are included in our Buffalo Forge Steel Doors® color product catalog, and have the following specifications*: 1) Entryways are designed with a modular assembly approach, and have been designed to be similar to wood door specifications. See page 2 of the Buffalo Forge Steel Doors® color catalog for detailed features and benefits of the Buffalo Forge series. 2) Buffalo Forge products are available as pre-hung, prefinished units only. 3) Both inswing and outswing, and right and left-hand openings are available for all entry configurations. 4) Unit includes weatherstrip, composite sill, doors, frames, flush-bolts, hinges. Lockset hardware not included. 5) Door jambs are 6-5/8" or 4-5/8" in width...same price for either. 6) Five glass textures are available for Buffalo Forge doors. All are insulated glass panels (see page 2 for more information). 7) All standard stock Buffalo Forge doors are 8´ tall and, 36" wide or 42" wide. 8) A detailed installation guide and an installation video guide CD is included with each Buffalo Forge entry (photo at right). This video is also available for viewing at www. glasscraft.com. 9) Available Options • 3 Design Series — NP-Series (Narrow Profile), WP-Series (Wide Profile) and WI-Series (Wrought Iron) • 6 color choices — SATIN finish, in Black, French Grey and Oil Rubbed Bronze, and ANTIQUE finish, in Pale Bronze, Pewter Grey and Copper Bronze. • 5 glass texture choices — see next page • 4 Handle set choices — see catalog page 58 for specifications and requirements • Custom design and production available 10) Installation instructions and an installation video are available on-line at www. glasscraft.com. It is very important to refer to these instructions so that the entry unit is installed correctly.
Available Stock Product Sizes • Single Doors: 36˝ x 96˝ x 1 1⁄2˝ or 42˝ x 96˝ x 1 1⁄2˝ • Double Doors: 72˝ x 96˝ x 1 1⁄2˝ Construction Doors: one-piece roll-formed 14 gauge steel doors are foam filled Door Frames: 4 5⁄8˝ and 6 5⁄8˝ widths and include pre-drilled mounting holes located to the “inside” of Q-Lon® weatherstrip.
Hinges and Jambs Hinges are stainless steel with ball bearings, solid bronze bushings and stainless steel pins. Jambs are industry standard sizes.
Product Approvals Glass is made in accordance with safety codes. Impact rated entryways are not available in this product line. Visit our web site for windload data under the Product Approvals link.
Custom Capabilities Custom products are available. Please refer to our Custom Doors Product Guide for more information.
Warranty See our warranty on our web site for this product line. * All specifications, product designs and information listed are subject to change without prior notice. We constantly are improving our products, and these improvements may cause us to change the specifications listed. 2
Product Specifications for Buffalo Forge Steel Doors速 Series Section Views
Glass Texture Options
Buffalo Forge WI-Series and WP-Series Doors
Primary Hinge
Glass Frame Hinge
Door Insulating Foam
Glass Panel Frame Butyl Sealant
Clear
1
Door Jamb Frame
Glass Privacy Rating
2
3
5
4
6
8
9
10
8
9
10
8
9
10
8
9
10
8
9
10
7
IG Glass Panel Weatherstrip
Mounting Screw (not included)
EXTERIOR
Decorative Wrought Iron
Reeds 1
2
Glass Privacy Rating
3
4
5
7
6
Frame Stop
Applies to standard Buffalo Forge Steel Doors in the Wrought Iron (WI) and Wide Profile (WP) series.
Ice Flower Glass Privacy Rating
Buffalo Forge NP-Series Doors
Jamb
Panel Door
Buffalo Forge Hinge Assembly
1
2
3
4
5
6
7
Hinge Assembly Ball Bearing Bronze Bushing Rain
Glass Privacy Rating
Stainless Steel Pin 1
2
3
4
5
6
7
Glass Bead Glass
Applies to standard Buffalo Forge Steel Doors in the Narrow Profile (NP) series.
Available in Bronze or Steel finish options.
Ocean 1
2
3
Glass Privacy Rating
4
5
6
7
3
Product Specifications for Buffalo Forge Steel Doors® Series Buffalo Forge Unit Dimensions
• Dimensions shown with 2’’ heavy-duty no twist framing system. • To calulate the Rough Opening add 2˝ to the width and 1˝ to the height of the unit dimensions.
R62 1/2˝
99 3/4˝
99 3/4˝
99 3/4˝
99 3/4˝
86 11/16˝
40 3/8˝
463/8˝
Single Door Single Door
Single Door Single Door
76 1/2˝
76 1/2˝
Double Arch Top Double Arch Top
Double Door Double Door
R38 1/4˝
38 1/4˝
R3515/16˝ R20 1/8˝
R38 1/4˝
1159/16˝
99 3/4˝
99 /4˝ 3
40 3/8˝
SingleRound RoundTop Top Single
4
717/8˝
SingleSurround Surround Door Single Door
76 1/2˝
DoubleRound Round Top Top Double
99 3/4˝
76 1/2˝
Double with Transom Double with Transom
Product Specifications for Buffalo Forge Steel Doors® Series Buffalo Forge Handing Guide
In-swing Configurations
Left Hand In-swing
Right Hand In-swing
Left Hand In-swing
Right Hand In-swing
Right Hand Out-swing
Left Hand Out-swing
Right Hand Out-swing
Out-swing Configurations
Left Hand Out-swing
All doors are viewed from exterior.
Jamb Size Options
Pre-hang Configuration Options
All Buffalo Forge entryways shown in this catalog are pre-hung as assembled door units. We offer two jamb sizes, 4-5/8˝ wide or 6-5/8˝ wide to fit most construction needs.
All standard Buffalo Forge door designs are available with Inswing or Out-swing doors and can be ordered as left-handed or right-handed units. Please refer to the chart above to specify the handing when placing your order. All doors on the handing guide are viewed from the exterior of the home. Door units may also be ordered with ADA (Americans with Disabilities Act) accessible thresholds. ADA threshold units are made to order and will require extended lead times.
The jamb includes pre-drilled mounting holes for easy installation of the door unit into all framing types. A full set of installation instructions and a how-to video are provided with each Buffalo Forge unit and are also available to download from our web site at www.glasscraft.com. If needed, you can use any standard brickmold and interior casing applications with the Buffalo Forge steel frame to fit seamlessly into your home’s construction and trim options. If our standard frame size will not work, please call and talk to our custom order department to review custom jamb options for your project.
5
Product Specifications for Buffalo Forge Steel Doors® Series Handleset Options All Buffalo Forge doors are 1.5 inches thick and can use standard door lockset hardware specifically made to work with this door thickness. (Hardware for WI-Series should NOT have a “lever” handle on the inside, as this will not allow the glass panel to open). The doors are pre-bored with a 2-3/4 inch backset for a handleset and a dead bolt. GlassCraft will NOT pre-drill additional holes at the bottom of the lockset, unless it was purchased from and pre-drilled by GlassCraft. GlassCraft mounts a “spacer plate” behind the hardware options shown below, to fit these 1.5 inch thick doors. The locksets shown below are standard “one-point” traditional locksets and may be used for right-hand or left-hand door swings. All necessary hardware is included. Installation into the door slab is included in the pricing of these one-point lock sets. Sizes shown below in inches. Refer to NOTE below for more guidelines in choosing the right handleset for a Buffalo Forge door.
Savoy Exterior
Interior
Exterior exterior
IH3001AN1PTBF One-point IH3001ANBF Dummy
IH3001ORB1PTBF One-point IH3001ORBBF Dummy
Savoy - Oil Rubbed Bronze / Black
Interior interior
Savoy - Antique Nickel
San Jose
Interior
Interior
With 11” x 2.5” trim plate
With 11” x 2.5” trim plate
I47020CORB1PTBF One-point I47020CORBBF Dummy
I47020CAN1PTBF One-point I47020CANBF Dummy
Exterior
San Jose - Oil Rubbed Bronze / Black
Exterior
San Jose - Antique Nickel
NOTE: All Buffalo Forge Door panels are 1-1/2’’ thick. In choosing a compatible handleset, make sure that your hardware selection will fit based on these specifications: a) Door thickness - 1-1/2” b) Backset - 2-3/4” c) Grip center - 5-1/2” (grip center is the distance between the middle of the thumb latch hole and the bottom hole in the door) d) For WI-Series, handlesets must not have a lever handle for the interior of the door e) Must be a one-point lockset f) Lock strip measurement - 12-15/16" 6
Product Specifications for Buffalo Forge Steel Doors® Series Technical Drawings (NP-Series) NP Buffalo Forge Series NP Series SeriesSquare SquareTop TopSingle: Single: Buffalo Forge Series Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Buffalo Forge Series
Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
1.25”
©GlassCraft Door Company Houston Texas
1.25”
*specifications may change without notice
©GlassCraft Door Company Houston Texas 7
Product Specifications for Buffalo Forge Steel Doors® Series Technical Drawings (NP-Series) NP Series Square Top Double : Buffalo Forge Series NP Series Square Top Double: Buffalo Forge Series Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Buffalo Forge Series
Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
1.25”
©GlassCraft Door Company Houston Texas 1.25”
*specifications may change without notice 8
©GlassCraft Door Company Houston Texas
Product Specifications for Buffalo Forge Steel Doors® Series Technical Drawings (NP-Series) NP Series Arch Top Double: Buffalo Forge Series Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Buffalo Forge Series
Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
1.25”
1.25”
© GlassCraft Door Company Houston, Texas *specifications may change without notice
©GlassCraft Door Company Houston Texas 9
Product Specifications for Buffalo Forge Steel Doors® Series Technical Drawings (NP-Series)
NP Series Round Top Double : Buffalo ForgeForge SeriesSeries NP Series Round Top Double: Buffalo Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Buffalo Forge Series
Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
1.25”
©GlassCraft Door Company 1.25” Houston Texas *specifications may change without notice 10
©GlassCraft Door Company Houston Texas
Product Specifications for Buffalo Forge Steel Doors® Series Technical Drawings (WP-Series) WP Square TopTop Single DoorBuffalo Entry Forge Series WPSeries Series Square Single: Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Buffalo Forge Series
Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
2”
2”
1.25”
*specifications may change without notice Door Company GlassCraft
Houston, Texas USA
©GlassCraft Door Company Houston specifications may change without Texas notice 11
Product Specifications for Buffalo Forge Steel Doors® Series WP Series Square Top Double Door Entry
Technical Drawings (WP-Series)
WP Series WP Square TopSquare Double Door EntryBuffalo Series Top Double: PANEL DOOR (see detail A)
Screw
4 58 " 4 58 "
(C200)
PANEL DOOR (see 1 detail A)
4"
5 8"
R175 ( (C200)
2"
5 8"
(C200)
2"
NP Series Square Top Single: Buffalo Forge Series 3 3 4 "X1 4 ")
Screw
FLAT BAR 1 441 "X" 21 " R175 (
Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, Forge WP Series Series and WI Series are identical. Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
3 3 4 "X1 4 ")
Screw
FLAT BAR 1 1 4 "X 2 "
Jamb 4
5 8"
Door jambs available in both Screw 4-5/8” and 6-5/8” widths. 1 Door jambs used in NP Series, WP Series and WI4 Series are identical.
1
Screw
Screw
Screw
2
2 Screw
4 Screw
Jamb 4
5 8"
Screw3 Screw 1-Panel Door 2-Grill 3-Glass frame 4-Glass
3 Screw
99 3 4 "
1-Panel Door 2-Grill 3-Glass frame 4-Glass
99 3 4 " 2”
96" 2”
2”
96"
Backset 2
3
Backset 2
3
4
"
4
"
2”
44"
44"
36" 1.25” 76 7 16 "
*specifications may change 12
without36" notice
GlassCraft Door Company
76 7 16 "
©GlassCraft Door Company Houston Texas specifications may change without notice
Product Specifications for Buffalo Forge Steel Doors® Series Technical Drawings (WP-Series) WP WP Series ArchTop Door Entry Series ArchDouble Top Double: Buffalo Forge Series Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Buffalo Forge Series
Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
2”
2”
1.25”
*specifications may change without notice GlassCraft Door Company
Houston, Texas USA
©GlassCraft Door Company Texas specifications may changeHouston without notice 13
Product Specifications for Buffalo Forge Steel Doors® Series Technical Drawings (WP-Series) WPSeries Series Round Round Top Top Double Entry WP Double:Door Buffalo Forge Series Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Buffalo Forge Series
Door jambs available in both 4-5/8” and 6-5/8” widths. Door jambs used in NP Series, WP Series and WI Series are identical.
2”
2”
1.25”
14
*specifications may change GlassCraft without notice Door Company Houston, Texas USA
©GlassCraft Door Company Houston Texas
specifications may change without notice