®
2002 Brittmoore Road Houston, Texas 77043-2209
Buffalo Forge ThermaPlus™ Steel Doors Product Guide Effective April, 2016
BUFFALO FORGE THERMAPLUSTM STEEL ENTRY DOORS
This guide includes the following information: • Product specifications for Buffalo Forge ThermaPlus Steel Doors® • Glass options • Product section views • Maintenance Guidelines • Slab and Pre-Hang information
®
Contact Us
Hours of Operation
1-800-766-2196 — National Toll-Free 1-713-690-8282 — Local Sales 1-713-690-2919 Accounting 1-713-690-9994 E-mail: sales: doorsales@glasscraft.com customer service: orderentry@glasscraft.com accounting: accounting@glasscraft.com marketing: marketing@glasscraft.com
Monday through Friday Eastern 9:00 am – 6:00 pm Central 8:00 am – 5:00 pm Mountain 7:00 am – 4:00 pm Pacific 6:00 am – 3:00 pm
Weekday hours are listed above. Should you wish to pick up your order, please call to confirm that the order is available for loading prior to your arrival.
Fax: 713-690-2919 Web site:
www.glasscraft.com
Order Forms and Quotation Forms are on-line at www.glasscraft.com under the “CUSTOMER SERVICE” window... then in the “SERVICE CENTER” area.
This catalog is © 2016 GlassCraft ® Door Company, Houston, Texas. No reproduction of any design, drawing, or any other graphic image from GlassCraft Door Company is allowed without specific approval in writing from GlassCraft Door Company. Pricing and product information/specifications may change without notice.
Product Specifications for Buffalo Forge Steel ThermaPlus Doors ThermaPlus Steel composite product specification overview: Doors built for the Buffalo Forge Steel ThermaPlus Doors Series program are included in our Buffalo Forge Steel ThermaPlus Door color product catalog, and have the following specifications*:
BUFFALO FORGE THERMAPLUSTM STEEL ENTRY DOORS
Door Construction • All 4 exposed edges are composite, and engineered wood in door stiles. • Stiles of these doors use a laminated-engineered construction method which virtually eliminates the possibility of warping. These engineered stiles extend from the top to the bottom of each stile, eliminating the need for "lock blocks". The doors therefore are not "handed"....door hardware may be installed on either door edge. • 18 Gauge, heavy duty steel faces on both inside and outside faces of the door Thermal Break • Due to the door design, the door is 100% thermally broken to greatly reduce thermal transfer of heat from one side of the door to the opposite side.
®
Available Options • 3 Design Series — Solid Panel Doors, Contemporary Doors, and Wrought Iron Grille Doors • 6 color choices — SATIN finish, in Black, French Grey and Oil Rubbed Bronze, and ANTIQUE finish, in Pale Bronze, Pewter Grey and Copper Bronze. • 5 glass texture choices • Many Handle set choices — see catalog page 9-11 for specifications and requirements. May use standard multi-point hardware due to composite-edge construction. Glass Panels • Glass panels installed in the doors are made of insulated tempered safety glass. • Double IG glass panels. • All IG glass panels are 1 inch thick. Door Slabs • Doors are available pre-hung, or as individual door slabs. • True square-edge construction and are trimmable by up to 1/4" on top edge and 2 side edges. Trimmable by 1-1/2" on bottom edge. • All doors available prefinished only. Doors may be painted by customer Pre-hung Units • Pre-hung unit includes weatherstrip, composite sill, doors, steel reinforced composite jamb frames, flush-bolts, hinges. Lock set hardware not included. • Both inswing and outswing, and right and left-hand openings are available for all entry configurations. • Door jambs are 6-5/8" or 4-5/8" in width...same price for both. Sizing Information • stock slab sizes shown at right Product Approvals • Most Premium ThermaPlus Steel Series door configurations have been tested for Windstorm Performance. Please refer to our web site for DP-Ratings.
Standard Stock Sizes
6'8" doors
8'0" doors
Standard In-Stock Door Slab Sizes
36" x 80"
36" x 96"
Trimmable Sizes - 1/4" on 3 sides : 1.5" bottom
42" x 96"
Warranty
• Limited 10-Year warranty on door slabs. • IG glass panels have 5 year warranty. • 5-year warranty on factory finish. Please refer to Warranty Details listed on our web site.
* All specifications, product designs and information listed are subject to change without prior notice. We constantly are improving our products, and these improvements may cause us to change the specifications listed. 2
Product Specifications for Buffalo Forge Steel ThermaPlus Doors • Excellent Price / Great value. • Patent-Pending thermal break design for energy efficiency • Patented "Plugless" insert frames, except speakeasies • Patented BioCore™ Foam (plant based urethane foam) • Patented Wrought Iron Grille design • No condensation forms on interior of door • Trimmable in the field for retrofit installations • Super-thick 18 gauge steel faces are 3-4 x thicker: no dents • 42" Steel 8'0" 3/4 lite doors with many options
• Both 6-8 and 8-0 tall doors available • Full Thickness doors are 1-3/4" thick • Wind Storm Tested • Arch Top Options available • All 4 edges utilize 100% recycled composite • Full sized door slabs for retrofit installations • Use standard door hardware • Steel reinforced jamb components standard • Excellent warranties
Multi-Patented Design for Strength and Performance A
Patent-Pending Trimmable edges. All door edges are trimmable, to allow for a perfect fit. 1/4” trim allowed on top and sides, and 1-1/2” on the bottom edge. Trimming the door more than this amount is not possible, as the saw blade will contact the steel face of the door. Use standard tools to trim door. These edges are moulded and positioned to be flush with the steel door skins faces on both sides of the door.
F
May be ordered pre-hung with factory installed 100% composite adjustable threshold is builtin to eliminate rotting or warping. Two threshold options available. These are solid thresholds (not hollow) and are adjustable for exact fit.
B
C
Six beautiful pre-finish options provide a durable finish in several colors and textures. Please refer to page 7 of the catalog to see colors available. Information on finish repair and touch-up is on page 9 of this brochure. Note that the homeowner may paint these doors. Order the door with a Black Satin finish, and then paint to the desired color,
C
LSL-Laminated Strand Lumber beams used on door stiles and rails provide the strongest steel door available! No “lock-blocks” used or needed. The entire door stile is a LSL beam! This is a very strong method of assembly. Much of the steel door skins is backed by this LSL timber, making it even more dent resistant.
D
Real hand wrought iron mounted to a composite frame for installation into the door. The iron grille can open for cleaning or be secured in the closed position for added security.
D
I
Also available are hand made clavos and hand forged iron door straps. These may be ordered in the same finish color as the door...or in a contrasting color of your choice. All at the same price.
E
The core of the door panels are filled with patented BioFoam™ GlassCraft’s unique insulating foam produced by utilizing plant-based oil sources. This is a closed-cell urethane foam with a density of approximately. 2.5 lbs. sq,foot.
F
All four door edges utilize 100% recycled composite content that is completely rot-resistant and waterproof.
G
Super-thick 18 gauge steel skin is 3 times thicker than ordinary steel door skins. Dent-resistant! And available with multipoint locks and StrikeJamb™ reinforcement in lock-side jamb leg.
H
Doors are a full 1-3/4” thick--thicker than many other premium steel doors. This allows for the use of standard door hardware or you can use multipoint locks!
B H
G E
A
I
Patented Insert Frames are 100% solid composite material....a PVC-based Wood Plastic Composite. Frames utilize GlassCraft's patented "plugless" frame design. Frame surfaces have a smooth texture.
3
Product Specifications for Buffalo Forge Steel ThermaPlus Doors Buffalo Forge ThermaPlus Unit Dimensions, Rough Openings, Design Pressure Ratings • Dimensions shown use our all-composite components The chart below lists rough opening dimensions, unit sizes, and “DP” Design Pressure ratings and Impact Approvals for all of our standard “inswing” entryway configurations for our Premium ThermaPlus Doors. Most of these entryway configurations have been approved by state regulatory entities for use in windstorm areas. Note that the “rough opening size” listed below is a “tight” size, and is for reference only. Your installer may wish to add to these rough opening sizes. It is important to measure your pre-hung entryway unit upon arrival at the job site, and to construct the opening to fit the individual entryway unit. “Inswing” and “outswing” units have the same rough opening size. In the chart below, “N/A” means that the product is not available OR the product configuration has not been tested for a DP Rating. For the most up-to-date information and test results for “outswing” entryways, please check your state regulatory website and/or our GlassCraft company website at www.glasscraft.com.
Inswing Entry Units with 6'8" Tall Doors 36" x 6-8 door DP Rating
Rough Opening Size
Unit Size*
single door
TBD
38-1/4 x 82-1/2
37-1/2 x 82
double door
TBD
74-3/4 x 82-1/2
74 x 82
Inswing Entry Units with 8’0" Tall Doors 42" x 8-0 door
4
36" x 8-0 door
DP Rating
Rough Opening Size
Unit size*
DP Rating
Rough Opening Size
Unit size*
single door
TBD
44-1/4 x 98-1/2
43-1/2 x 98
TBD
38-1/4 x 98-1/2
37-1/2 x 98
single arch top door
N/A
44-1/4 x 98-1/2
43-1/2 x 98
N/A
38-1/4 x 98-1/2
37-1/2 x 98
double door
TBD
86-3/4 x 98-1/2
86 x 98
TBD
74-3/4 x 98-1/2
74 x 98
Product Specifications for Buffalo Forge Steel ThermaPlus Doors All-Composite Jamb Frame Components include StrikeJamb™ Steel reinforcement Buffalo Forge Steel THERMAPLUS Doors are available as door-only or as pre-hung with rot-proof composite door frame with StrikeJamb™. Pre-hung units include brick mold, T-astragal (for double doors), sill cover, door sweep, weatherstripping, and adjustable threshold, plus 3 ball-bearing hinges on 6’-8” tall doors and 4 ball-bearing hinges on 8’-0” tall doors. ALL Pre-hung units include GlassCraft’s exclusive StrikeJamb™ reinforcement, providing extra security around the door frame strike plate area with the addition of a large 18 gauge steel reinforcing plate on single doors, and a steel reinforcing plate added to the astragal for double doors. Pre-hung units may be ordered unfinished or factory finished. Standard pre-hung door units can be ordered with any of our standard double bore or multi-point lock sets and handle set options. Pre-hung entryways include 4-5/8” or 6-5/8” full composite jamb options and composite exterior brick mold. GlassCraft composite jamb system can be stained or painted. The Strike Jamb reinforcement (image shown at right) is installed on the lock side jamb leg for safety and security. For double door units, a steel reinforcement plate is added to the smooth composite T-Astragal for reinforcement. (Double door units do not include steel reinforcement in the jamb legs...only in the Astragal). Prices in the price list for pre-hung units include a factory pre-finish on both door and jamb. To order a prefinished door pre-hung in an unfinished door jamb fame, order the door slab only and add the pre-hung stock number from the next page (page 6) which is for an unfinished pre-hung unit.
Buffalo Forge Steel ThermaPlus Door Handing Guide In-swing Configurations
Left Hand In-swing
Right Hand In-swing
Left Hand In-swing
Right Hand In-swing
Right Hand Out-swing
Left Hand Out-swing
Right Hand Out-swing
Out-swing Configurations
Left Hand Out-swing
All doors are viewed from exterior. 5
Premium ThermaPlus Door Pre-hang & Jamb Kits Pre-hung Unit: We pre-hang the following 5 entry configurations available using our 3´ 0˝ wide and 6´ 8˝ or 8´ 0˝ tall ThermaPlus doors, and our 3-6 wide x 8-0 tall ThermaPlus doors. Pre-hung units include brick mould, door sweep, weatherstripping and adjustable threshold, plus 3 hinges on 6´ 8˝ doors and 4 hinges on 8´ 0˝ doors. Also included is our new StrikeJamb 18-gauge steel reinforcement. Standard pre-hang includes use of composite jamb, frame, and sash components. Pre-hung units may be ordered unfinished or prefinished to match your door. For rough opening information please see page 4.
Single 6´ 8˝ Door Pre-hung Unit: Single 36˝ X 6´ 8˝ Door for 4 5⁄8˝ or 6 5⁄8˝ thick walls. Jamb Kit: includes jamb legs, header, brick mould, and compression weatherstrip. Kits available for 3´ 0˝ door width. Kit does not include door, sill, casing, hardware or glass panel.
5 4 ⁄8 ˝ Width 6 5⁄8 ˝ Width LIST
Single 36˝ X 6´ 8˝ Door Pre-hung Unit (non-impact)
PH100 684SCM
PH100 686SCM
$620
6´ 8˝ Single Door Entry
Double 6´ 8˝ Doors Pre-hung Unit: Double 6´ 8˝ tall doors X 36˝, wide, unit is for 4 5⁄8˝ or 6 5⁄8˝ thick walls. Jamb Kit: includes jamb legs, header, brick mould, t-astragal, and compression weatherstrip. Does not include doors, sill, hardware, casing, or glass panel. Kit may be used for 3´ 0˝wide doors. 6´ 8˝ Double Door Entry
5 4 ⁄8 ˝ Width 6 5⁄8 ˝ Width LIST
Two 36˝ X 6´ 8˝ Doors Pre-hung Unit (non impact)
PH200 684SCM
PH200 686SCM
$920
Single 8´ 0˝ Door Pre-hung Unit: Single door 8´ 0˝ X 36" or 42" wide. Unit is for 4 5⁄8˝ or 6 5⁄8˝ walls. Jamb Kit: includes 9´ jamb legs, header, brick mould, quarter round, and compression weatherstrip. Does not include sill, hardware, casing, door or glass. Kits available for 3´ 0˝ or 3´ 6˝ wide doors.
5 4 ⁄8 ˝ Width 6 5⁄8 ˝ Width LIST
Single 36˝ X 8´ 0˝ Door Pre-hung Unit Single 42˝ X 8´ 0˝ Door Pre-hung Unit
PH100 804SCM PH100 804SCM42
PH100 806SCM PH100 806SCN42
$715 $820
8´ 0˝ Single Door Entry
8´ 0˝ Single Arch Top Door Pre-hung Unit: Single 8´ 0˝ Door x 36" wide, arch top door for 4 5⁄8˝ or 6 5⁄8˝ walls. Jamb Kit: includes jamb legs, arched header, brick mould, and compression weatherstrip. Does not include door, sill, hardware or glass panel. Single 36˝ X 8' Door Pre-hung Unit
4 5⁄8 ˝ Width
6 5⁄8 ˝ Width
LIST
PH100 804SCMA
PH100 806SCMA
$1,125
8´ 0˝ Single Arch Top Door Entry
Two 8´ 0˝ Doors Pre-hung Unit: Double 8´ 0˝ Doors X 36˝ or 42˝ wide. Unit is for 4 5⁄8˝ or 6 5⁄8˝ walls. Jamb Kit: includes 9´ jamb legs, header, brick mould, quarter round, t-astragal, and compression weatherstrip. Does not include hardware, doors, sill, or glass panel. Kits available for 3´ 0˝ or 3´ 6˝ wide doors.
5 4 ⁄8 ˝ Width 6 5⁄8 ˝ Width
8´ 0˝ Double Door Entry 6
Double 36˝ X 8´ 0˝ Doors Entry Pre-hung Double 42˝ X 8´ 0˝ Doors Entry Pre-hung
PH200 804SCM PH200 804SCM42
PH200 806SCM PH200 806SCM42
$1,050 $1,120
Composite Jamb & Trim Components: smooth Listed below are the standard jamb and trim composite component parts usually required for door installations. Smooth texture...no wood grain. Available lengths are listed. Special pricing may be available for orders of full pallet quantities....please inquire.
Exterior Jamb Legs - all jamb legs are kerfed for weatherstrip
Stock #
Description
Dimensions
List
Composite Jamb Legs R-458K-7SCM R-458K-8SCM
with smooth texture 82" Jamb Leg, 4 5/8˝ Width 98.5" Jamb Leg, 4 5/8˝ Width
1 1⁄4˝ X 4 5/8˝ X 82" 1 1⁄4˝ X 4 5/8˝ X 99"
$72 $87
R-658K-7SCM R-658K-8SCM
82" Jamb Leg, 6 5/8˝ Width 99" Jamb Leg, 6 5/8˝ Width
1 1⁄4˝ X 6 5/8 X 82" 1 1⁄4˝ X 6 5/8˝ X 99"
$110 $125
Stock #
Description
Dimensions
List
Composite Brick Mould B-180-7SCM B-180-100SCM
85˝ Composite Brick Molding 102˝ Composite Brick Molding
1 1⁄4˝ X 2 X 85" 1 1⁄4˝ X 2 X 102˝
$36 $43
Description
Dimensions
List
1 3⁄8˝ X 3 1⁄2˝ X 5⁄8 ˝ X 96˝
$74
Dimensions
List
Brick Mould — WM180 Profile
Astragal, T-astragal type, kerfed for weatherstrip
Stock #
Composite T-astragal with smooth texture T-1-9SCM Composite T-astragal, 96˝
Weatherstrip — Compression Type
Stock #
Description
QEB-650-81
Weatherstrip
82˝ length
$7
QEB-650-96
Weatherstrip
98˝ length
$9
7
Glass Panel Product Information
Construction Specifications of Glass Panels for ThermaPlus Doors 1) The glass used in our ThermaPlus Steel Doors meets or exceeds the 2011 Consumer Product Safety Commission Requirements for Safety Glazing in Architectural Entries and the International Residential CodeÂŽ for One and Two Family Dwellings section R308 Glazing Guidelines. All glass panels are in compliance with the CPSC 16 CFR 1201 requirements. 3) Our double thick IG decorative glass panels are produced with Insulated Glass construction using tempered safety glass on both sides. Using IG glass panels in our doors allows for easier cleaning, energy efficiency, and more security. All glass panels in the Buffalo Forge ThermaPlus Catalog doors are two layers thick. 4) Upon installation, glass panels are mounted into the door using structural silicone sealant. This sealant provides several benefits, including a straight, black sight line, and excellent weatherproof seal, and a further cushion for the glass panel to absorb the shock of a door slam. 5) The Buffalo Forge Steel ThermaPlus Door series offers various textured glass options for the double-thickness glass panels. See the next page for more information on these glass texture options.
Glass Texture Direction in ThermaPlus Doors
Butyl Rubber Gaskets
Safety Glass Safety Glass
The Water, Flemish, Reeds, and Rain glass textures shown below have textures with a direction. It is important to note that the direction usually is positioned to run from the top to the bottom edge of the glass panel.
Desiccant inside plugless frame
Door
However, in certain of our Contemporary Doors, this glass direction is positioned to run from side to side. This includes our Newport and our Beverly door options
exterior plugless frame Double thick IG unit installed into ThermaPlus door with plugless frame
DOUBLE IG ( INSULATED GLASS)
CLEAR
1 - PRIVACY RATING
8
WATER
3 - PRIVACY RATING
FLEMISH
5 - PRIVACY RATING
REEDS 7 - PRIVACY RATING
RAIN 9 - PRIVACY RATING
ThermaPlus Door Pre-finish Information Shown below are the six colors available for ThermaPlus door finishing. These are the same six colors that are offered for Buffalo Forge Classic doors. The three "satin finish" colors are all 1 color spray applied colors. The three "antique finish" colors utilize a faux-finish application of color over a black base coat.
SATIN FINISH
ANTIQUE FINISH The photos of the finish colors shown at left offer an indication of the final appearance. Due to the hand finish process, color of actual finished doors may vary from the finish samples in this catalog.
BLACK SATIN
ANTIQUE PALE BRONZE
If adding speakeasy grilles, clavos and straps to a 2 panel solid door; or clavos and straps to wrought iron doors, please note that these decorative options can be prefinished to match the door, or can be finished in another color above. Your choice. You should note your color choices on the Buffalo Forge ThermaPlus Prehang Order Form. Field Touch Up of colors: Satin Finish: The three Satin Finish colors may be touched up in the field if needed to repair construction damage or scratches from use. All three colors are easily available at local paint supply vendors. Use Rustoleum® Universal® Spray in the following colors. Be sure to closely follow the manufacturers directions and safety warnings when applying these paint finishes.
FRENCH GREY SATIN
ANTIQUE PEWTER GREY
for Black Satin: Universal Flat Spray: Flat black color for French Grey Satin: Universal Metallic: Dark Steel color for Oil Rubbed Bronze Satin: Universal Metallic: Oil Rubbed Bronze color
®®
OIL RUBBED BRONZE SATIN
ANTIQUE COPPER BRONZE
Antique Finish: The three Antique Finish colors may be touched up in the field if needed to repair construction damage or scratches from use. A separate touch up guide is available for this process. This painting and touch up guide is available on our web site: www.glasscraft.com/pdfs/bfpaintguide.pdf And a video guide is available here: www.glasscraft.com/pdfs/bfpaintingguide.mov
GlassCraft Door Company manufactures several products in steel and offers them in three finishes. We currently offer black, antique bronze and antique pewter finishes.
PAINTING GUIDE
Buffalo Forge Buffalo Forge Steel Doors Steel Doors
®
®
These products may need to be touched up due to minor damage during shipping, handling or installation. This guide will instruct you in a step-by-step approach to touch up of finishes in the field. Professional painters and finishers may also be contacted in your area for additional support. Repairs for severe damage due to exposure to excessive water, salt water or corrosive chemicals, or any ofther misuse should be carried out by a professional.
WARNING: Wear protective gloves and safety goggles.
To download a video version of this installation guide, please visit our website: www.glasscraft.com
Materials & Supply List Rub ‘n BuffTM ½ fl. oz. tube*: “Autumn Gold” (for Bronze) “Silver Leaf” (for Pewter) Rust-OleumTM or other good quality enamel paint: “Flat Black”
(for Black Satin)
Rust-OleumTM Metallic Paint & Primer In One: “Flat Soft Iron” (for French Grey) “Oil Rubbed Bronze” Cheesecloth
Lacquer thinner
Lacquer
Clean, lint-free rag
*Rub ‘n BuffTM is available directly from the manufacturer at: http://www.amaco.com or at hobby, craft and art supply stores.
1
9
ThermaPlus Door Finishing & Maintenance Information Maintenance and Troubleshooting Maintenance: This is a steel faced door with 100% composite edges on all sides. If a GlassCraft composite jamb system is used, then all materials are composite. No maintenance is necessary other than occasional touching up of the steel if the steel face of the door or the wrought iron grille (if applicable) are scratched, or installed in a salt-water environment. Rust: The door is finished with a top-quality finish system to inhibit the formation of rust on both the surface of the door as well as on the wrought iron grilles. The doors are not warranted against rusting if scratched or installed near a salt-water environment. If rust is visible, you should sand the rusted area with 400 grit sandpaper. And then re-finish according to the guidelines on page 9.
Binding or Sticking of the Door: Ensure that the door(s) continues to swing freely, does not bind in the frame, and that all hardware remains completely functional. First check to ensure that all hinge screws are securely fastened and secure. If the door continues to stick or bind in the door frame, sand the edge of the door (use an electric sander or a hand plane) to trim the door so that it does not bind or stick. Be sure to refinished the newly sanded exposed area.
Cleaning the Door: Cleaning of the door is best performed by simply dusting the interior and exterior of the door using a soft, clean cloth. If required, a very mild soap and water solution may be needed to remove dirt from the door. Do not use any abrasive detergent or solvent based product, as these products will harm the quality of the finish. DO NOT use a water blaster to clean your door. Do not use any solvent to clean the door.
10
ThermaPlus Door Finishing & Maintenance Information Installation Notes: Trimming Edges, beveling, hinge pockets: All ThermaPlus doors may be trimmed to ensure a good fit into the jamb. The doors are produced to allow trimming of 1/4 inch maximum on the 2 long edges and the top edge. Do not trim more than this amount, or you will hit the steel face of the door. You may use standard wood-working tools to trim these edges, such as a powered saw or a wood plane or sander. The door edge may be beveled, but do not remove more than 1/4" in this process. The door edge should also be prepped for your hinges. We suggest using only 4 inch or larger ball-bearing hinges, and at least 3 hinges for a 80 inch tall door and 4 hinges for a 96 inch door. Be sure to not remove more than 1/4 inch when prepping the door for the hinges. Door edges do not have to be refinished after trimming, as the edges are all composite, and are waterproof. However, you may paint the edges after trimming if you wish. Paint colors listed on page 9.
Boring: To bore holes in the door for your door hardware, make sure that your drill bit is rated for use with metal.
Hinges and Screws used: ThermaPlus doors are very heavy, and the installer of the door into a home must use the correct hardware and fasteners in order for the door to be problem-free. It is essential that the door hinges be heavy-duty ball-bearing hinges...we suggest a weight rating of at least 200 pounds per hinge pair. Use 4 hinges for 8 foot tall doors and at least 3 hinges for 6-8 tall doors. Hinges must be mounted with long screw fasteners in order to correctly secure and hold the door. We suggest using wood screws that are at least 3 inches long to hold the hinge plate onto the edge of the door. Use screws of equal or longer length to affix the hinge through the jamb leg and into the wall framing. It is up to the installer to ensure that the hardware choices and installation methods are correct and proper to ensure a functioning and safe door installation.
Jamb Section — Single Door Entry Brick Veneer, Drywall, & Brick Mould View from Top
long screw fasteners extend into wall framing and at least 3" into door slab
Ball bearing Hinge
INSIDE Door
Interior Casing Drywall
Rough Framing Weather Stripping Jamb Exterior Siding
Brick Mould
Brick Veneer
OUTSIDE
11