Box Office Report Caitlyn O’Donnell, Georgia Mayor, Hannah Morton, Adrian Wasilewski, Anum Sharif
Contents
1.0 Location
5.0 Power and Data Services 5.1 Lighting
2.0 Photographic Survey
6.0 Construction Details
3.0 Flow of people
6.1 Construction Detail Sections
3.1 Concentration 3.2 Spatial Awareness and Interactions
7.0 Existing Materials
4.0 Site Survey
8.1 8.2 8.3 8.4
4.1 Plan 4.2 Elevations 4.3 Ceiling Plan
Concrete and Solid Wall Granite Flooring MDF and Felt Board Stainless Steel and Glass
CO’D
1.0 - Location
These are the initial plans we were given to provide an idea of our location within the New Adelphi building. The highlighted area on the plan is our focus point for this project which is across from the lifts in the main atrium. The toilets lie just beside the site and is visible to passers by. Although this plan gives us a starting point for this project we needed to go down and visualize this in person.
The view of the space is obstructed by the two large concrete pillars which run at the front view of the site. From the outside is it not the best space for advertisement and engaging the public as it has a restricted view. From both entrances it is not clear this is a reception/box office therefore this will be a key factor to remember in order to function well in this area.
AW
2.0 - Photographic Survey
These are a few photos taken at our site to give us a reference when designing what it looks like.
AW
3.0 - Flow of people Student’s that have lessons above the first floor of the atrium and are using the lifts to access their workspaces, will notice the box office on a regular basis as they will be passing this area a lot. When people are exiting the lifts the eye is drawn towards this if you are passing the box office and exiting through the cafÊ side entrance. If people are walking in from the entrance near the Santander bank viewing will be less successful. Student’s from ground floor will rarely notice it unless if they are entering from second entrance and going towards elevators or staircase near the fashion side. Every student who decides to go to toilet downstairs will inevitably see the box office which is a great advertisement scheme and to not make sure our design has something facing that way. The box office location is not ideal for drawing attention as it is blocked by the existing structural columns however this may be something we keep in mind for our designs.
AW
3.1 - Concentration of people
C
A
B
1. If you are coming into the building from entrance A most students focus is the lifts and the height of the main atrium. There is no visibility from here of the site therefore it may be beneficial to use some signage to direct the flow of people to this space for a clear visit. If our designs protrude from the existing columns and have eye catching features then this makes this area something people wont miss on their way to the lifts. 2. In you enter on the New Adelphi through the side which is located closest to the canteen this out of all three of the entrances has the clearest visibility of the site and would have the most foot traffic as people would be moving from the canteen in breaks and lunch alongside students making their way to their workspaces in the lifts. 3. Entrance C is located opposite chapman building and next to the reception area and gallery. Here you will have visibility of the side elevation of the columns where our design site is and should have some kind of side advertisement feature. This is the same view as what you would have if you pass it to go to the toilets.
A
3.2 - Spatial Awareness and Interactions The areas of movement between ‘closest’ & ‘furthest’ to the Project Space in colour order: §Red Zone= MAIN PROJECT SPACE §Orange Zone= Public Restrooms, Corridor, Theatre, Lower Staircase, Store & around the Elevators §Yellow Zone= Seating areas surrounding §Green & Blue Zones= Café, Walkways & Entrances
Spatial diagram of movement around the Mezzanine area. The highlighted areas indicate the main zones on the ground floor that people pass through nearby the Project Space, & how closely they navigate around it. During study hours it’s imagined to be the most busiest between it’s at peak times from 9:00AM-4:00PM on weekdays. After these hours, the Adelphi building generally becomes less occupied & quiet up until 10:00PM if there are no events taking place. This is based on how close the public interact with the proposed project space, rather than the quantity of people. It could be used to indicate which areas are at highest risk to the public for construction purposes when the potential box office is being built, or how the closest areas surrounding during the design process can be adapted to target & attract the public.
HM
4.0 - Site Survey Sketches
HM
4.3 - AutoCAD Elevations
HM
5.0 - Power and Data Services
Power and Data: In this area there are 3 double 13 amp sockets. This could be used for power connections for things such as laptops. This connection point suitable for the use of laptops and 4 data connection point for the use of s phone. Each of these have galvanized conduct up the concrete pillars containing the wiring. These galvanized conducts are held up by saddle clips.
GM & HM
5.1 - Lighting Lighting Construction detail: Plasterboard acts as a skin for the ceiling
Non conductive material used as design and to protect the Bulb.
Bulb constructed into ceiling
Reflective material used inside the light frame to exaggerate the light
They are very light for the area and can be very over powering. There is a reflective mirror like material fitted into the lights to make the space seem much lighter. The bulb is fitted up into the top of the l=frame so the power/wires can run. Through the ceiling as this is for safety of the users and also creates a tidier atmosphere
There are 5 surface mounted down lighters protruding by 90mm. In addition to this there are two recessed downlighters flush on the floor in front of the left concrete columns.
GM
6.0 - Initial Construction Sketches
GM
6.1 - Construction Details Silicon cushioning, To reduce risk of glass getting in contact with harder surfaces.
Concrete Wall
Skirting Detail 10mm thick, 90mm high from the floor
Glass Panel sat between silicon cushioning.
Standard design spec/ flooring tiles
Typical Design Spec Tiling- Granite
Concrete slab Screed Rigid Insulation Stainless steel acting as the skin for the overhead
Skirting Detail The Skirting Detail consists of 3 layers of material, Insulation, Concrete and Terrazzo. The Skirting detail sits between the wall and the floor detail. Although it is 90mm high from the floor it sit into the floor construction by around 30mm to ensure it is sturdy.
Overhead Balustrade Detail Here is the Overhead Balustrade Section Detail, the glass panel is carefully sat in between 2 silicon blocks which sit on either side of the lass and inside of the stainless steel frame. The frame in fitted into the floor using a big screw. There is a layer of screed is applied over the fixture so the standard floor spec can be added onto the top.
CO’D
7.0 - Existing Materials and Finishes
5
Felt Board
2
Solid Wall Concrete
6
Stainless Steel
3
Granite
7
Glass
4
MDF
1
CO’D
7.1 - Solid Wall and Concrete
Solid Block wall
Concrete Column
What is Block Wall? • Block wall is normally foundation for concrete or masonry block walls are made out of concrete. These are build up like bricks using cements creating stable walls which can be stronger than concrete if built well. Sustainability? • The solid blocks are hollow therefore are lightweight, durable and also fireproof within the space. It is also soundproof. They remain in good shape for years. Feasibility? • This wall is plastered over solid blocks and finished in a white paint. The rest of the external walls within the space are painted this colour which acts as a blank canvas in our project therefore there will not be any contrasting colour palettes that may look wrong. • You are able to drill into this for fixtures and fittings however this is not relevant to our project.
What is Concrete? • It is formed from cement which is a natural material made up from limestone or other materials. Concrete is used in a lot of modernized buildings to give an industrial appearance. In this case it is a smooth finish with a pale beige coloring. This being such a large feature, it has a neutral earthy tone so it doesn’t overwhelm the space. This is an affordable material which is fire resistant so its properties are great for this space. Sustainability? • It is a strong and maintainable material • Within the space we have been given the concrete is an aesthetic feature with stands between the atrium however as it is inside, corrosion features are not a problem. • Concrete is recyclable and can be grinded down and be used in other constructions. Feasibility? • You would be able to drill into the concrete as there are already joints where pipework with electrics have been placed.
CO’D
7.2 - Granite Flooring Granite Floor Tiling What is Granite? • Granite is made up of minerals such as quartz and feldspar, which contribute to its characteristic sparkle. It is a tough material therefore had great longevity. It can be used in a unique to add sophistication and style to the room. Sustainability? • Granite is considered to be unsustainable materials as they are non-renewable resources and have very energy intensive manufacturing processes. However, this does not mean that Granite shouldn't be used they are both highly recyclable and reusable. They have high durability which means that this will not be a short term material and will have less replacement issues. Feasibility? • Due to its texture in this case there is a lot more grip factor therefore wheels or casters will hold in place with locks and any desk chairs wont glide in the workplace.
CO’D
CO’D
7.3 - MDF and Feltboard
MDF
Felt Board
What is MDF? • Medium-density fibreboard is made up of hard or soft wood residuals and engineered to mix with a wax to produce this material. It is usually denser than plywood and is used in this case to make a partition wall in the space which is temporary. Sustainability? • It is a sustainable material itself however the bonding agent or glue is not sustainable. Feasibility? • As this is only a temporary partition wall it could be removed however as we were given the task to use the space we were given this is a great way of hanging light weight items such as programme times and other light marketing items.
What is it felt board? • Felt board is commonly used in school classrooms however in this building it is used as a lining under the stair balustrade. Most of the time the underneath is lined with cork or sponge therefore you can pin items onto it or hang things. Sustainability? • If its being used constantly its sustainability may age and get plucked so might need to be reupholstered. Feasibility? • This is a great way to showcase papers or signs for direction or informational purposes. • This is also a bold representing colour of the university branding so could be included in the design of the box office.
CO’D
7.4 - Stainless Steel and Glass
Stainless Steel
Glass
What is Stainless Steel? • This material is hard and durable and doesn’t get corroded very easily therefore it can link both indoor and outdoor spaces. This material doesn’t need extensive maintenance and because its so easy to clean it does not absorb bacteria it is hygienic therefore for such a large scale building it is the best material. Sustainability? • Steel is a highly recyclable material and so much of the stainless is repurposed therefore it is very sustainable. It is strong and durable so can withstand stresses unlike other framing materials so can hold box office design if required do. Feasibility? • As this is a pretty sturdy material we are able to hand things from this from the top balustrade. If you wanted to hand signs or a suspended section of your design this is something you can consider attaching to.
What is it? • Toughened Safety Glass Balustrade Panels are made of tempered glass which is a safety glass processed by controlled thermal treatments increasing its strength compared with normal glass. They vary thickness from 15-19mm. It is the best modernised way of creating an open space in such a large scale building. Sustainability? • This is a fully recyclable material which provides environmental benefits. It is made from natural materials and is versatile. Feasibility? • This is not something that may that useful within structural design however materials that you can reflect in your design may be this.
Materials: Moisture resistant MDF and concrete or concrete effect paint -Working out how the desk might work
Brochure stand and extra box to secure MDF blackboards -filling this gap gives a consistent line from the box office.
Types of Casters and how they're drawn
How Drawers are assembled
Different types of Joints
Front Elevation
Side Elevation
Plan View
13
53
72
13
210
2.5 mm Acrylic at an angle to support a5 brochure's
Front section cut to resemble old style tickets
53
13
13
174
56
Scale: 1:2 Name: Hannah Morton Paper Size: A3 Title: Brochure Stands Date: 26/10/18 Project: Box Office Architecture technology and special design
Material Specification:
2.5mm Transparent colourless acrylic
Name: Hannah Morton
Scale:
1:40
Title: Blackboard Casing around columns
Paper Size:
A3
Project: Architectural technology and special design -Box office
Date: 22/10/18
Plan View Scale 1:50
Front Elevation 00
10
Hemnes hat and coat stand
18mm moisture resistant MDF boardacting as partition wall with a hinge door for acces to the box office painted in RAL Signal White (9003) 0% gloss 18mm MDF cube with a layer of concrete to match desk -acts as a support to blackboard panels
105
268
0
750
E
15
400
18mm MDF stand with a layer of concrete to match the desk - for brochures and leaflets
Desk Plan View 17
99
Cross Section A
185 35
Detail E Scale 2:1
98
17
99
Aluminium Channel Bracket , Cubical Fitting -supporting the far right panel
495
Long Section of Panels
Low arrogate concrete layer on approximately 5 mm
1595
535
Cross section A 18mm moisture resistant MDF
Adhesive Vinyl Lettering Font- Replica pro to match University branding 354
Panel Elevations 1686
10
10
A
B O X
B
115 330
5mm MDF for drawers
2425
Hidden castors light duty swivel castor and wheel break with grey rubber wheel
Detail A Scale 1:1
Detail B Scale 1:1 Butt Joint secured with wood glue
WHAT'S ON
B O X
COMING SOON
O F F I C E
O F F I C E
Tee Joint secured with wood glue Concealed ball bearing drawer runner 1020 Adhesive Vinyl Stickers of Film Tape Black cam buck strap to secure feature boards
Detail F Scale 1:10
D 5mm MDF coated in Rust-Oleum Black - Chalkboard Pain
University logo cast in concrete, set into the desk, secured, joints covered with concrete to look seamless
Detail C Scale 1:5
C Harmony C-Clamp connecting the two desk sections
Detail D Scale 1:5
Rim Lock Case, Short Bolt Travel, Backset 25 mm, Symo 3000
Name: Hannah Morton
Scale: 1:25
Title: Architectural Technology and Spatial Design
Paper Size: A1
Project: Box Office Level 5
Date: 26/10/18
2115
135
10 mm MDF drawer frame
Hannah Morton Level 5 Box Office Architectural Technology
Rationale My design My design was based around the main aspect of the box office, which is the desk. This is the space that people interactive with the most. The desk is protruding at an angle, this is to give people going to the theatre a sense of direction and stops the box office from being hidden away. I decided on a rectilinear desk at an angle to mimic the shapes and levels of the New Adelphi building. The desk is in two sections which are able to be clipped together with a small clamp, each section is on 4 lockable castors. This enables easy movement and also means the desks can be positioned in different shapes and angles to also create a sense of theatre in the building. On each section of the desk there are 3 drawers for storage, the top drawer is lockable for safe storage of cash boxes. I have also made sure there is enough room for one worker on each section of the desk, there is also close access to power and data points for use of laptops and phones. The materials used for the desk are moisture resistant MDF with skim coat of concreate. This compliments the raw finishes throughout the building and by being on MDF keeps a light and changeable design. Surrounding the desk are two columns running up though the building. I decided to use these columns as a basis for the theatre production lists. To do this I have designed a blackboard casing around the columns, where production lists can be written on and also gives the opportunity for students to come together and decorate the blackboards to go with the theatre productions. In addition to this I have taken advantage of the floor lighting that shines on the bottom of these columns, I saw this as a way to represent the performance spotlights. There are also vinyl stickers of film tapes running up each side of the blackboards, I thought this was also fitting for the light to shine up against this as a way of representing how film tapes are watched through light shining through. Each blackboard casing is secured with cam-buckle straps which can be seen at the back of the columns, this celebrates the tough fittings and fixtures represented throughout the building. I have also considered small parts of my design such as the chairs being a certain colour to match the chairs in the theatre. I have also designed a small casting of the Salford university logo into concrete and placed at the front of the desk to represent Salford university branding. For staff storage, I have included a coat and bag stand, I feel this adds a small sense of character to such a linear design as this echoes the costume changes from the theatre production. In addition to this my design has a small MDF partition wall to create a separation between the corridor to the toilets and the box office. This partition wall is a free-standing waist height as not to take away from the openness of the building. Furthermore, I have designed a brochure stand where the front is in shape of an old-style theatre ticket again making more references to the theatre aspect of the design. Materials For my design I have tried to stick to using cost effective and sustainable materials such as:
Hannah Morton Level 5 Box Office Architectural Technology
•
•
•
MDF- this is a low-cost material and is also light weight, which enables easy assembly and movement. This material can also be given a range of finishes and coats. Which makes it ideal for my design. Concrete- I have chosen to use concrete in my design mainly to match the aesthetic of the building but also because it can give a seamless and sophisticated look at the same time as being a hard and resilient material for a worktop. Blackboards- these blackboards will be a thin piece of MDF coated in blackboard paint. I chose this material as it is a cheap and easy way to show production lists and also gets involved in the creative aspect of the building where other students can get involved.