FoDR portfolio

FOUNDATION OF DESIGN: REPRESENTATION, SEM 1, 2017

HE YAN 980426 STUDIO 22 - TALIA STOCH

MODULE 01 HOW TO DRAW A CROSSIANT MODULE 02 PLATNESS vs PROJECTION MODULE 03 PATTERN vs SURFACE MODULE 04 FRAME vs FIELD

3

4

5

How to measure a Croissant?

I set the backgound and camera to get three different views of my croissant as photographs and also scanned the sections. Then I adjusted the scale of the photos with the scanned views of the section. As for the axonometric drawings, I created a 10x10 mm grid on the tracing paper to trace the scaled section views with the intersections points on the scale of 1:1. The corresponding grid were setting at 45 degrees angle. I rematked the intersection on the new gridlines and connected them to get the axonometric projection.

6

7

Two images projection in fineliner

8

My new Mario world is made up by the city of sky, the sea world and an ice berg on the bottom. I added a scaling ladder which is made by pink clouds to connet two layers to create a feeling of dreamy. As for the city of sky I used elements such as clouds and colorful balloons. The aquatic plants such as corals and water plants form the sea world.

There is also a fish tail hiding in the cloud.

Illustrated Mario’s new world 9

I used a T-square, 45 degree set square, 4H pencil, eraser and tracing paper. I vset my drawings and originval mario world elevation at a 45 degree which give objects depth and project them up in the picture.

I used two elevation view as a guide to form my world with two tracing papers. The bases are 200mm by 200mm. And then overlaid two layers together.

10

I traced the pencil drawings on the LED tracing pad. I used 0.05 fineliner pen for the lines and 0.4 fineliner pen for the section cut line.

11

12

I used three different panels to create my panelised lanscape, which are a higher and low triangular pyramid and a rectangular pyramid with an open side on the top. And i used four point attractors to form the whole flow of my off set points in order to make it variable.

13

The photo of one sample 3D panel is correspond to the left unroll template. I first cut down the unroll panel from printed A3 papers. And then I set up my working place using an A3 cutting pad, a ruler, scissor, a carving knife,isacorrespond glue, several to small clipstemplate. and a pen Iknife.And Themetal photo of aone sample 3D panel thebull leftnose unroll first cutthe down the bottom photo is aprinted part of A3 my papers. panels beforing folding used clips to fix paperanand unroll panel from And then I settogether. I up my working place using A3card cutting pad, a together to cut. To facilitatae the folding process, I use knife to cut lightly through the line. After metal ruler, a scissor, a carving knife, a glue, several small bull nose clips and a pen knife.And the cutting them, I folded them up and glued them on.

bottom photo is a part of my panels beforing folding together. I used clips to fix paper and card together to cut. To facilitatae the folding process, I use knife to cut lightly through the line. After cutting them, I folded them up and glued them on.

14

The design is based on the shape of batfish which also matches the flow of my terrain. I used three variable panels to create my landscape. There are two rectangular pyramids and a rectangular pyramid with an opening gap on the top. The rectangular pyramids make the whole module look different at different angle. The following four images are the photos that I took from four corners.Â

15

perspective 01

FRAME vs FIELD

perspective 02

16

HIDDEN CITIES 4: THEODORA In my isometric drawings, the notations tell the same story as the scenes which is illustrated in my perspectives graphically.

The camera position shows the view point of two scenes. There are two parts of my isometric. The left 1/3 shows the disaster that the city has been experienced. The three dash lines show the transition of space, time and light. The time passes from left to right. Furthermore, the sunlight shines from the right hand side.

17

18

I choosed the first perspective to describe the people calm and peaceful.

I usethe babies trying to create a sen I choosed the first perspective to describe people's life which looks like As for thetobackground, theand citybright of Flo calm and peaceful.future.

I use babies trying create a senseI use of hope future. As for theitbackground, the city of Florida.

The reason I choose is that theI use well-established building alsowhy revea choose it is thatHowever, the well-established also in reveal life. th the tail ofbuilding sphinxes thecitizens' wealthy hidden place and However, the tail of sphinxes in the hidden place and the bad prediction bring from the eagle which is illustrated at the bottom of the from the eagle which is illustrated at the bottom of the roof show the danger is coming.

Asperspective, for the second perspective, themore fauna arearemor As for the second the fauna are more and which dragons, unicorns and condors.

The background change the darker sky and dragons, unicorns and condors.

Thetobackground change much more clouds, bring pressure to the people.

People to start be awarePe muchfogs more clouds, fogs bring pressure thetopeople. of the risk and the whole city is under a atmosphere of fear and anxiety. of the risk and the whole city is under a atmosphe

According to the interpretation above, along with the notation of changing to tourist the interpretation above, withofthe time, the routeAccording that I set for let them experience thealong transition time, from past to future. time, the route that I set for tourist let them exper

time

19

20

Go back as far as the beginning of this semester, when I went to the first lecture and tutorial, the scanning and drawing of the croissant seems like a tough tasks for me. I have not studied any software before the university. Using software is an extremely big challenge for me. The interesting I modified module when 1 preparing portfolio, I foundand there are athe lot scanning of things and could be improve photoshop, Go back thing as farisasthat the when beginning of thisthe semester, I went my to the first lecture tutorial, drawing of theusing croissant seems which I have learned a lot software such asbefore PS, Indesign.

When I attended the workshop, I alwaysbigfelt confused likemeans a toughthat tasks for me.

I have notabout studied any software the university.

Using software is an extremely challenge forand me.could The not keep up with the speed of the teacher.

I hadthe to module reviewed the content workshop whenthere I did are my module following it step by step.using The progress is could be improve photoshop, interesting thing is that when I modified 1 preparing my of portfolio, I found a lot of things longwhich and difficult, however, I gain the knowledge throughsuch it. Itas is PS, worth mentioning when I the did workshop, the moduleI always 2, I struggled at the first step which means that I have learned a lot about software Indesign.

Whenthat I attended felt confused and could not is creating worldof based on the two plan I spent lot of time looking the instruction finally is keep up the withMario the speed the teacher.

I had to images. reviewedAfter the content of workshop when through I did my module followingonitthe steplms bycarefully, step. TheI progress understood to dohowever, it a littleI gain bit. When I firstly created theit.line the world inthat thewhen illustrator, every time2,when I need to lookfirst for on thewhich long and how difficult, the knowledge through It iswork worthofmentioning I did the module I struggled at the step menu bar. After for several I learned to click theI shortcut which is a step forward.

In Module 3, learned to do modules by is creating thedoing Marioit world basedtime, on the two planhow images.

After spent lotkey, of time looking through the instruction onI the lms carefully, I finally hand using some tools such cutting board,I firstly knife and glue. the It was hugeofwork we need to make 100time panels, however, final understood how to do it aaslittle bit. When created lineawork the because world in the illustrator, every when I need tothe look forwork on the gives me bar. a sense accomplishment. menu Afterofdoing it for several time, I learned how to click the shortcut key, which is a step forward. In Module 3, I learned to do modules by hand using some tools such as cutting board, knife and glue. It was a huge work because we need to make 100 panels, however, the final work gives me a sense of accomplishment.

The first module which is how to draw a croissant, I need to improve a lot because it is the first time. Especially for the format, the problems on designing of the layout, the size of the word and typo makes my work not very satisfied. So I changed them in my portfolio. As same as modulethe which is how a croissant, need to improve a lot because it ishow the first time.issuu Especially forwix thepage, format, the Iproblems theThe firstfirst problem, journal for to thedraw module 2, there Iare many problems.

I did not know to insert into the which on designing theand layout, the size themodule word and typo my realized work notthat verythe satisfied.

I changed them mythe portfolio. samesoas learned it on theoflms improved it inofmy 3 and 4. makes And I also journalSo is important as wellin as moduleAs itself, firsta lot problem, the journal the module 2, there are3,many problems.

I didof notmyknow how to issuubackground. into the wixFurthermore, page, which II thatthe I put more time on my for journal.

As for my module I retake the photo modules andinsert edit the learned it tone on theoflms improved scenes it in mytomodule and 4.more And contrast I also realized that the journal is importanton as my wellisometric. as the module itself, so changed the twoand perspective give it3much and the some of the annotations that I put a lot more time on my journal. As for my module 3, I retake the photo of my modules and edit the background. Furthermore, I changed the tone of two perspective scenes to give it much more contrast and the some of the annotations on my isometric.

21