2.8. Mounting of Cab (Z 24029

from Komatsu Hydraulic Mining Shovel PC3000-6 General Assembly Procedure Manual – PDF DOWNLOAD

31a2.2 Assembly of Superstructure onto the Undercarriage (Z 90

2.8. Mounting of Cab (Z 24029)

1. Lift the cab.

Lifting eyebolts are delivered with the machine. 2. Align the cab with the cab base. 3. Lower the cab fully down and fasten the cab with bolts (1)

M16x2 and sleeves (02). 4. Connect electric cables and the hydraulic hoses. 5. If the machine is equipped with an air conditioner, connect the air hoses and cables. 6. Mount the handrails to the cab if not yet done.

Z 20371a

2.8. Mounting of Cab (Z 24029

Next Article

31a2.2 Assembly of Superstructure onto the Undercarriage (Z 90

2.8. Mounting of Cab (Z 24029)

More articles from this publication:

31a2.2 Assembly of Superstructure onto the Undercarriage (Z 90

Z 240252.7. Mounting of Handrails, Steps and Gratings

2.1. Assembly of Undercarriage (Z 24016; Z 24017; Z 24018

2.6. Mounting of Counterweight (Z 24024

stick2.11 Assembly of the bucket to the

s2.12 Mounting of the Pin Seal

ion (Z 240312.13 Putting the Central Lubrication System into operat

Stick2.10 Mounting of

t up2.9 Pre-checks prior Initial Star

This article is from:

Komatsu Hydraulic Mining Shovel PC3000-6 General Assembly Procedure Manual – PDF DOWNLOAD