s2.12 Mounting of the Pin Seal

2.12 Mounting of the Pin Seals

2.12.1 Backhoe (Z 23006)

Position Designation

02; 06; 11; 15 seal ring 03; 07; 12; 16 upper ring half 04; 08; 13; 17 lower ring half 05; 10; 14 seal fixing 20; 21; 22 bolt

The illustration shows the mounting places of the one piece design seals.

Fill the groove of the fixing halves with grease before installing. Proper functioning of the seal is only established in case of an intact seal ring.

Z 21963

2.12.2 Bullclam bucket (Z 21963)

The illustration shows the mounting places (A, B; C) of the one piece design seals of the bullclam bucket attachment.

Mounting procedure (For example place “B”)

1. Insert both seals (1). 2. Assemble the stick and the rear wall as described on pages before. 3. Install both fixing halves (2) over the seal ring and tighten bolts (3).

Z24031