Battery Charging • The battery level indicator is shown on the remote switch transmitter unit. Battery level indication as follows . Green - ready to use Red - Requires charging Flashing red - Battery flat charge immediately No light - Remote switch power unplugged, or electric control unit switched off. • To charge the battery, move the bale feeder into a suitable location near a 100v -240v power source. • Connect the charger to power source. • Connect the other end of the charger into the electric control unit charging socket. • Ensure the electric control unit is switched off to save further battery usage. • Switch the power source on and the charge level indicator on the battery charger will shine RED. The light will change to GREEN once the battery level when charging commences. • Once the battery is fully charged; turn off power source, unplug battery charger from the power source and electric control unit charging socket. • Before connecting the battery charger, ENSURE both the plug and the socket are clean and dry. • Hustler Equipment recommend not charging the battery until the red light is showing on the battery level indicator. Also charging the battery unitll the green light is showing on the battery charger. This will result in a longer battery life.
8
