WARNINGS CONT. • Vehicle MUST be operated at low speed over even ground when the bale feeder is attached. It must be kept as low as practical to the ground when traveling on a loader or telehandler. • Take EXTREME CAUTION when driving the vehicle on non-le vel ground, with the balefeeder attached. Do not exceed 15 degrees’ side slope when attached to the 3-point linkage of a tractor. • KEEP CLEAR of moving feed platform and pivot mechanism. DO NOT use for transporting anything other than a bale. • KEEP CLEAR of feed rotors. These have sharp points which are needed for teasing the bale. • ENSURE chain covers are in place when the machine is operating. Chain may cause pinch point. • KEEP CLEAR of bale tynes when the linkage frame is not connected to the mainframe. • REGULARLY check the machine for signs of wear, stress or damage. ENSURE any parts are repaired/replaced if needed. • ENSURE the platform lift arm is completely lowered before engaging the linkage frame with the feed unit.
WARNING! BEFORE ATTEMPTING ANY MAINTENANCE, ENSURE ENGINE IS SHUT OFF AND NO ONE IS NEAR THE HYDRAULIC CONTROLS
7
