commARCH - July August 2013 by IdeaSoil

Commercial

J UJLU/ LA/UAGU G2 021011 3 V OV LO.L .9 1 1 N ON. O6. 6

BUILDING PRODUCTS

SERVING ARCHITECTS, CONTRACTORS, AND OWNERS IN COMMERCIAL CONSTRUCTION

Research Maximizes Renovation Blast Mitigation Requirements Touch-Free Hygienic Faucets

What’s Your Legacy? Flooring toxicity, and the choices they will remember you by Isn’t it time for a change? There are many great reasons to choose MCT tile flooring including the fact it costs less to own from Day One. But the days, years, and decades to come are where MCT truly excels. MCT is 100% BioBased, naturally antimicrobial, allergen and plasticizer free, and fully biodegradable without the toxicity or disposal nightmares of PVC-based products. Today, you’ll win design awards with MCT. Tomorrow, your rewards will be even more gratifying.

OR EF TIM

E NG HA C A

To learn more, visit www.forboflooringNA.com/legacy

with

creating better environments

For free information, circle 200

contents INSIDE

Induction lamps light Packer home. see page 36

F E AT U R E S 8 Research Maximizes Renovation Projects Taking time to understand goals for a space often results in a renovation that does more than simply upgrade.

12 Blast Mitigation Demands Careful Attention Well-planned blast mitigation protects buildings and saves lives.

D E PA R T M E N T S 6 24 56 59 60

The Green Angle Renovate! Marketplace Showcases Index Portfolio

18 Touch-Free Fixtures Tap Into Hygiene Touch-free innovations offer a number of benefits to a facility, including increased cleanliness and operational savings.

20 Renovate! PEX Pipe In Hotel Renovation 53

Using PEX-a piping makes possible plumbing replacement in a historical building without tearing out walls.

PROJECTS 26 Museum Of Flight, Seattle 28 Lambeau Field, Green Bay, WI 46

35 County Courthouse, Muscatine, IA

jul /aug 2013 vol. 11 no. 6

36 Museum Of Natural Sciences, Raleigh, NC

PRODUCTS 41 46 50 53 54 55

Interiors Exteriors HVAC & Plumbing Lighting & Electrical Building Technology Windows & Doors

About The Cover This expansion of the 1903 Wilson Hall at Haverford School, Haverford, PA, was part of a $28-million project that resulted in a LEED Gold landmark facility that is also a teaching tool for environmental responsibility. To learn more about this and other renovation projects, turn to pages 8, 20, and 35.

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS 1

E IL EM AT ST RS SY VE LIT ST P O S M EE UR FR O CTDU Outdoor Unit Indoor Unit

LOTS OF ROOMS? NO PROBLEM!

Our Most Versatile Duct-Free Split System. •

The efﬁciency of a single 54,000 BTU/h outdoor unit

•

Cooling and heating for up to 8 zones

•

Piping lengths as long as 228 feet

•

Ideal for residential and light commercial applications

INTRODUCING THE LG 8-ZONE MULTI F MAX. With the arrival of our MULTI F MAX 8-Zone system, LG brings a new scope of climate control innovation to residences, light commercial projects and ofﬁce expansions. One state-of-the-art inverter drive compressor connects with up to 8 interior units, available in a full range of wall-mount, ducted, and ceiling cassette models. When energy efﬁciency and installation ease are prime considerations, LG MULTI F MAX expands the boundaries of Duct-Free performance. Find out what LG has for your clients at lg-dfs.com. For free information, circle 201

contents ONLINE EDITORIAL PRODUCTS

CBPdigital E X T R A S

To learn more about the products mentioned in the features in this issue, visit our digital magazine at http://www.cbpmagazine.com/digital/julaug2013. Turn to the article that interests you and click on the icon to download a spec sheet or watch a video. Below is a summary of this issue’s Digital Extras.

As part of our variety of online editorial products, Commercial Building Products presents Commercial Conversation at http://www.commercialconversation.com. Commercial Conversation is a series of semi-monthly podcasts in which the editors speak with commercial-construction industry experts about issues that affect specifier decisions. Podcasts are supported by a resource page and are available for download from the website.

Glass For Interior Spaces: Diane Turnwall Diane Turnwall, market segment director for interiors at Guardian Industries Inc., Auburn Hills, MI, offers insight into the growing trend of using glass for interior walls and to define inner work spaces. In the podcast we talk about sound, privacy, lighting, safety, wayfinding, and other glass-related factors.

Fenestration Spec Factors For Buildings: Mike Turner Blast Mitigation Demands Careful Attention, p. 12: Click on the Digital Extra icon for this feature and you’ll travel to the portion of Kawneer’s website that deals with their blast-mitigation products. Touch-Free Fixtures Tap Into Hygiene, p. 18: The promotional video that accompanies this feature will provide you with more information about the Moen line of commercial restroom fixtures. PEX Pipe Big Factor In Hotel Renovation, p. 20: Click on the Digital Extra icon at the end of this feature and gain access to several videos that will help you better understand how the PEX piping system is installed.

Mike Turner, vice president of marketing at YKK AP America Inc., Austell, GA, and board member of the American Architectural Manufacturers Association, Schaumburg, IL, returns to discuss factors to consider when specifying fenestration for various building types. This podcast accompanies his article on p. 13 in which he discusses regional factors that affect fenestration specifications.

Sustainability And Its Future: Gale Tedhams Gale Tedhams, director of product and supply chain sustainability, Owens Corning, Columbus, OH, shares her views of current trends and the future of sustainable construction, along with the roles the LEED, IgCC, and BioPreferred programs are playing in the process.

Making Labs Work For Today’s Research: Jay Brotman Jay Brotman, AIA, and a partner with Svigals & Partners, New Haven, CT, is a leading expert in laboratory design. In our ninth podcast, he discusses the latest trends in laboratory design, the impact of sustainable construction, and the challenges of renovation projects.

www.cbpmagazine.com offers many online products meriting investigation. Just click on the icons on the website.

IP Cameras Fly High In Space Museum, p. 28: The Digital Extra for this feature will provide you with spec sheets for the Samsung SNB-5000 HD network camera and the H.264 network PTZ series of cameras. Induction Lamps Light Lambeau, p. 31: Click on the Digital Extra icon in the digital magazine and see a news report about Everlast and the Lambeau Field project. Judged To Be Efficient, p. 34: The Digital Extra item that accompanies this feature is a zip file containing the Mitsubishi City Multi product catalog, a product guide for the R2-Series VRF heat recovery system, and an interactive pdf that shows the HVAC layout for the lower level of the Muscatine, IA courthouse. Museum Creates Rock Stars With Tile, Granite, p. 39: Click on the Digital Extra icon at the end of this story to learn more about Laticrete’s Hydro Ban load-bearing waterproofing product.

Recent blog topics: • • • •

NRDC, NYU recognize energy-efficient commercial tenants AAMA offers certification exams Construction employment increases Prevent power disruptions with backup generator

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS 3

Have you Experienced the Savings? With over 50 years of EPDM manufacturing experience and 16 billion square feet of membrane installed, Carlisle SynTec’s EPDM can be trusted to deliver toughness, reliability, and industryleading weathering performance. » Factory-Applied Tape (FAT™ ) and prefabricated accessories enhance workmanship and improve system performance » Dark-colored EPDM can reduce energy consumption in cooler climates by decreasing a building’s heat demand

For free information, circle 202

J U L /A U G 2013

editor’s NOTEBOOK

VOLUME 11, NO. 6

Commercial

BUILDING PRODUCTS

SERVING ARCHITECTS, CONTRACTORS, AND OWNERS IN COMMERCIAL CONSTRUCTION

1300 S. Grove Ave, Suite 105 Barrington, IL 60010 847.382.8100 fax: 847.304.8603 www.cbpmagazine.com

EDITORIAL Gar y L. Parr Edit orial Dir ec t or

847.382.8100, ex t . 101 gpar r @ cbpmagazine.com

Marga Par r Assist ant Edit or

847.382.8100, ex t . 115 mparr @ cbpmagazine.com

Elisa Kendal-Ward Ar t Dir ec t or Ellen Sandkam List Rent al Ser vices

ekendalwar d @ cbpmagazine.com 847.382.8100, ex t . 110 esandkam @ at plist s.com

ADVERTISING SALES 1300 S. Grove Ave. Barringt on, IL 60010 847.382.8100 Fax : 847.304.8603 w w w.cbpmagazine.com

SUBSCRIPTIONS For subscript ion inquiries or change of addr ess, go t o w w w.cbpmagazine.com, or cont ac t Jef fr ey Heine, Cir culat ion Dir ec t or Phone : 630.739.0900 ex t . 204 Fax : 630.739.7967 E-mail : jheine @ cds1976.com

WEBSITE w w w.cbpmagazine.com Developed and maint ained by Web Publishing Group w w w.webpublishinggroup.com

Keeping The Old Ones Alive As a photographer, one of my favorite things to do is photograph old buildings, such as the one shown here from the Soulard district of St. Louis. Old buildings have that extra something that is rarely seen in “modern” architecture. I don’t know what that “something” is, but I sure enjoy looking at it. On the opposite side of that coin, I always feel a twinge of sadness when I see old buildings being destroyed to make room for the replacement of the day, be it a parking garage, park, skyscraper, or strip mall. (Don’t we have enough of those strip mall things?) My first thought is always, “Can’t we find a way to keep that old building, fix it up, and put those old ‘bones’ back to work?” That’s why I enjoy hearing and reading about renovation projects, the primary subject of this issue. Today’s renovation environment is exciting because those involved are doing so much more than replacing windows and slapping on a new coat of paint. As author Chris Sullivan points out in our lead feature (“Research Maximizes Renovation Projects,” p. 8), leading architects are taking a much broader view of renovation projects, doing some research, developing a thorough understanding about what a client needs, and renovating buildings so that they Old buildings, such as this one in the Soulard district of St. Louis, have a deliver a much-improved work environment, character that is rarely evident in save energy, and provide features that often modern architecture. the client doesn’t realize he/she needs. They are truly making those old bones live again. I also enjoy the way technology is making it possible to keep that old look while providing needed amenities. That is particularly evident in Jayson Drake’s article about renovating the Mayo Hotel in Tulsa, OK, (“PEX Pipe Big Factor In Hotel Renovation,” p. 20). Were it not for the many advantages of PEX piping, renovating that historical structure would have been extremely difficult, much more expensive, and likely at the price of much of the original character. The renovation also might have never happened and another beautiful structure would have been lost forever. There are lots of great old buildings that, with just a little effort, could be restored to their original beauty while providing the energy efficiency, indoor air quality, and creature comforts that we all would like in a work environment. I hope we continue this renovation movement so that the old buildings can shine once again.

Gary L. Parr Editorial Director Commer cial Building Produc t s ConSour ce LLC 1300 S. Gr ove Avenue, Suit e 105, Barringt on, IL 60010 847.382.8100

COMMERCIAL BUILDING PRODUCTS (USPS 23077) is published nine times/year in January, March, April, May, June, July, September, October, and November, by ConSource LLC, 1300 S. Grove Ave., Suite 105, Barrington, IL 60010 (Phone: 847-382-8100). Periodicals postage paid at Barrington, IL, and additional offices. Entire contents copyright 2013 by ConSource LLC. All rights reserved. SUBSCRIPTION: COMMERCIAL BUILDING PRODUCTS is mailed free to major users of commercial building products across several industries. Non-qualified subscriptions in the United States are $24 for one year. POSTMASTER: Please send address changes to: COMMERCIAL BUILDING PRODUCTS, Creative Data, 440 Quadrangle Dr., Suite E, Bolingbrook, IL 60440-9719. For other circulation information, call 630-739-0900.

Get free product information at www.cbpmagazine.com JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS 5

The Green Angle

Analyze Before You Illuminate With LEDs Lighting a space with LEDs generally results in energy savings, but realizing maximum bang for your buck requires a little homework. Brett Shriver, Global Lighting Technologies

he benefits of LED lighting are wellknown—no radiation, no flicker, long life, energy savings, instant on, no tubes to replace, and no ballasts to fail. The hazardous waste that accompanies today’s conventional light sources, such as the mercury in fluorescent and high-intensity-discharge lamps, is eliminated. However, replacing conventional lighting with LED fixtures is not necessarily a straightforward project. To realize maximum benefit from the technology, several factors must be carefully considered. For one, what’s the ROI? That depends on the scale of the retrofit and the technology used. We retrofitted all of the spaces in our 16,000-sq.-ft. facility with LED fixtures. We used 2 x 2-foot downlights in the areas with a 2 x 2-foot ceiling grid, and 1 x 4-foot lights in the areas with a 2 x 4-foot grid. Since completing the retrofit in November 2012, our monthly kW usage has dropped from 896 to 303, and our electric bill has dropped by more than 65%. Actually, for lighting alone, excluding any other source of electricity consumption, our savings are in the 75% to 80% range. Based on our experience, ROI is approximately 18 to 24 months, at the most. Plus, there is additional ROI from providing employees a more pleasant working environment that has more attractive lighting with significantly less glare. The cost What’s it going to cost? There is always a tradeoff between efficiency and cost. Component reliability and lifetime are also key issues. LEDs vary in price, and cheaper is not necessarily better. You’ll also be using power supplies, which last much longer than ballasts, and if you source good ones, they’ll eliminate the failures that are inherent with ballasts, not to mention the expensive visits from the electrician. Overall, on average, energy savings are around 75%, compared with a fluorescent system. Another consideration: How much

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

are the lights on? The longer they are on, the more you save. An extreme example is a casino, where the lights are in use 24/7. In this environment, LEDs are a no-brainer. The dimming capabilities of LEDs darken gaming tables not in use in the wee hours of the morning. Hospitals also benefit from this capability by dimming areas not in use during nighttime operation. This maintains a more genial atmosphere and makes hospitals more, well, hospitable. LED lighting in schools provides a more comfortable atmosphere for learning, another example of ROI you can’t quantify but is nonetheless genuine. Another option is occupancy and daylight sensors that will turn the lights on or off depending on whether anyone is in the room or if ambient light coming through the windows eliminates the need for artificial lighting. LED lighting can also be designed in a variety of sizes and colors.

Ask for the specs. What is the expected lifetime of the fixtures? 30,000 hours or better? Are they easy to install? What about a warranty? A reputable manufacturer will warrant its downlights for 2 to 5 years. What kind of technology are the fixtures using, and how efficient is it? Are they illuminated by LED arrays or LEDs spaced along the edges of a light guide, which typically uses fewer LEDs, lowers part count, and increases energy efficiency? What about the optical performance? How uniform is the lighting? LEDs, despite all of their advantages, do generate heat, which is emitted from the back of the unit. This problem requires a cooling solution, either active or passive, to properly dissipate the heat and ventilate the fixture. An adequate thermal heatsink solution to ventilate an LED system is vital for every lighting installation, especially recessed troffer/ceiling light fixtures. Watch out for high junction temperatures that can degrade LED performance. Every chip manufacturer tests and can provide junctiontemperature ratings for each of its products. Power dissipation indicates the amount of power wasted as heat by a given device. That is normally what is meant when an LED fixture is given a maximum power-dissipation rating. A power-dissipation rating of 46 W from an input of 100 to 240 VAC indicates low power consumption and high efficiency. As always, comparison shopping pays off. Make sure the components and materials provide good efficiency, have the UL label, use long-life LEDs, and incorporate good-quality power supplies.

Energy savings with LEDs are around 75% compared with fluorescents.

Features to seek, mistakes to avoid There are a number of errors and oversights to avoid. Number one is selecting the wrong vendor. If you’re outfitting a commercial building, you need an electrician to perform the installation. Make sure you hire reputable contractors who use good-quality LED fixtures, are experienced, and charge a reasonable rate. Installation should be relatively easy for a true professional. Don’t overpay. Be cautious of companies who say they will work with you to get grants and tax breaks from the government and then double the markup on the lighting fixtures and components. Don’t base your decision on cost alone without considering the quality of the components, particularly the LEDs and power supplies, which are the two main causes of failure. There’s a lot of poor quality out there, so caveat emptor applies.

Get free product information at www.cbpmagazine.com

Brett Shriver is vice president, sales & marketing, at Global Lighting Technologies (GLT) Inc., Brecksville, OH.

o p t i Q™ a smart new window series

Thermal intelligence jusT goT brighTer Introducing the Newest OptiQ™ Ultra Thermal Windows from Traco

The industry’s smartest window keeps getting smarter. The

ongoing partnership with the U.S. Department of Energy, the

new AA 5450 single and double hung windows – the latest in

AA®5450 series integrates innovative features to deliver the

the OptiQ™ Ultra Thermal Window series – continue to set

highest levels of thermal performance. With the AA®5450

the standard for brilliance in window design. The result of an

series, thermal intelligence just got brighter.

For free information, circle 203

feature REHAB/RETROFIT CONSTRUCTION

Research Maximizes Renovation Projects Taking time to understand the owner’s business and goals for a space often results in a renovation project that does much more than simply upgrade equipment. Chris Sullivan, C.C. Sullivan

he renovation universe comprises a wide variety of project approaches that span a spectrum from mere product replacement at one end to major reconstruction—additions, expansions, and other structural reconfigurations—on the other end. Yet even one of these categories involves quite a range of options: A product changeout can be relatively minor, for example, such as swapping LED lamps for existing halogen or incandescent bulbs, or it can be as extensive as a roof replacement, requiring new insulation board, waterproofing, membrane, and ballast. Retrofits, which typically describe a system changeout (the roofing example straddles the line between replacement and retrofit), contrast with building renovations, which tend to be extensive, multi-system projects such as a gutrehabilitation of an old office building. All of these terms describe the removal of existing building components and installation of new products and systems. The more complex and extensive the project, the further along

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

the spectrum it moves, where the designand-construction teams are bigger—and the bills can make owners turn pale. Toward the more-complex end, there are also more code considerations and regulatory hurdles to address. Each project approach has its place and time, says Layng Pew, AIA, managing principal for WXY Architecture + Urban Design, which recently renovated a major museum in the firm’s home town of New York, adding a Drawing Center in the process. “It’s important not to take a boilerplate approach to project planning or material and system selection, which can cause you to miss opportunities,” he said. “The first step for us is to understand where the client is coming from and how they want to grow.”

Know the owner’s goals Some rules of the road may apply to any situation, experts agree. Replacement projects, for example, are meant to be tactical, simple, quick, and cost-effective, but in reality they may suffer from a lack of experienced oversight. Too often

Get free product information at www.cbpmagazine.com

they are driven by a single product vendor or specialty contractor whose sole aim is to make a sale. Of course, the seller may have the requisite knowledge to handle the work, and if the owner offers competent oversight of the project, it should all turn out fine. Joshua Zinder Architecture + Design (JZA+D), Princeton, NJ, is currently leading selective renovations of 506 Carnegie Center, a building in a commercial office complex in Princeton owned by Boston Properties. “For institutions and other owners that occupy or otherwise retain their buildings for the long term, any replacement project offering a good return on investment or life-cycle cost is worth consideration,” said Marlyn Zucosky, IIDA, partner and director of interior design at JZA+D. “Whether it’s durable flooring or LED lighting, we can review the ROI or conduct an LCA [life-cycle analysis] to weigh the costs and benefits from installation through the disposal, recycling, or reuse of the products at the end of their useful life.” As an example, New York architect Lee H.

3 4

Skolnick, FAIA, describes the high ROI of signage and exhibit replacements, where everything from informational displays and entire museum installations are swapped out to better support the building-owner’s core mission. The same is true of educational presentations that reflect a school’s curriculum or a manufacturer’s product line, or a brand-boosting showplace simply meant to pull in more traffic to a cultural landmark. For the Mohonk Preserve Visitor Center in New Paltz, NY, which reopened this spring with new signage, a topographical display, touch table, and other exhibits, the design team at Lee H. Skolnick Architecture + Design Partnership, New York, also adapted the gift shop for reuse as an orientation theater and added a handicappedaccessible sensory trail. “As opposed to schools, which tend to be curriculum- and standardsoriented, when you are developing highly interpretive exhibits and interior environments, a key to determining whether the investment is worthwhile is knowing the audience,” noted

Skolnick. “Research on their needs and interests allows us to create the best entry points for getting the visitors engaged with the subject matter.” This market orientation is common among even institutional projects and a major driver for replacement projects and full renovations alike.

Beware conﬂicts of interest While product replacement may be undertaken by the sole vendor or by in-house facilities’ staff, system retrofits by definition tend to require design guidance by an architect, engineer, or specialized consultants, or a mix of these professionals. In some cases, the manufacturer of a retrofit system may offer in-house engineering and expediting of approvals at a relatively low cost. For the energy retrofit market, the role of the 100 or so U.S. energy service companies (ESCOs) registered with the Department of Energy, Washington, has been a double-edged sword for building owners. ESCOs typically aim to provide an energy-saving upgrade opportunity with minimal capital investment. Anticipated energy

At The Drawing Center in New York, a museum specializing in works on paper, the firm WXY added 50% more gallery and programming space and a sophisticated lighting scheme that combines natural light and new, non-UV-emitting LED fixtures.

Joshua Zinder Architecture + Design (JZA+D), Princeton, NJ, is currently leading selective renovations of 506 Carnegie Center, a building in a commercial office complex in Princeton owned by Boston Properties.

The ﬂexible, new spaces of the W-B 24 scientific research hub for Yale Univ.’s growing West Campus accommodate the newly formed Nanobiology Institute and its study of cell biology and biophysics. The renovation project provides a strategic modular platform for customization to the unique needs of these recently announced interdisciplinary research groups.

The Mohonk Preserve Visitor Center features a topographical display, touch table, and other exhibits. The design team at Lee H. Skolnick Architecture + Design Partnership also adapted the gift shop for re-use as an orientation theater and added a handicapped-accessible sensory trail.

The Oliver Lofts in Boston are an adaptive re-use, mixed-income residential property that was formerly a brewery warehouse. Energy upgrades included medium-density spray foams and cellulose insulation to bring exterior enclosure R-values to R-23.

reductions are used to finance the new products, systems, engineering, operations support, and often even a warranty. That’s good news. But on the downside, many of the ESCOs are affiliated with utilities or product manufacturers, so they have a strong incentive to load up the retrofit with the product brands and fuel types that make them money, whether it’s lighting, HVAC systems, solar panels, or liquid natural gas. Still, energy retrofits are a fast-growing segment of the renovation universe, and projections by research firm SBI Energy, Rockville, MD, show that by 2015 as much as 15% of the total market could be driven by upgrades to building MEP (mechanical, electrical, and plumbing) systems. The benefits of energy retrofits, however, depend heavily on proper operations and maintenance practices following the work. Energy retrofits are only a fraction of the market for sustainability-focused green renovations. The trend took root in utility incentives for demand-side reductions and later the 2005 Energy Policy Act, which provided large

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS

feature REHAB/RETROFIT CONSTRUCTION tax breaks for investments in energy-saving technologies. Then the 2007 Energy Independence and Security Act gave added impetus to the use of renewable energy systems.

The greenest renovations According to Michael Binette, AIA, NCARB, and principal of The Architectural Team, Chelsea, MA, in some projects it’s possible to recycle on a very large scale—redeploy entire buildings, existing materials, structure, and MEP systems—saving money and resources in the process. Some of these adaptivereuse projects for historical factories open the door for adding modern cogeneration systems or even reviving hydroelectric capabilities. They can also accommodate renewable energy, using their large, flat roofs to support new photovoltaic panels and solar thermal collectors and by drilling geothermal wells below. Existing buildings usually can be reconnected to the grid more easily than most greenfield sites, too. “When evaluating the best gains, look for simple answers first,” Binette said. “We work often with historic mills, where new insulation offers the biggest benefit at the lowest cost. We have achieved thermal barrier values as high as R-23 with medium-density spray foams in combination with cellulose insulation on century-old masonry structures.” One such case was the Oliver Lofts in Boston, an adaptive reuse, mixed-income residential property that was formerly a brewery warehouse. The return on energy-related upgrades is well established. For green buildings and sustainability retrofits, there is a growing body of information underscoring the financial benefits of upgrades focused on occupant health and well being, lower toxicity, and occupant productivity. One study of hundreds of LEED-rated buildings by the Univ. of San Diego and the real-estate data company CoStar, Washington, showed rents increased by more than $11 and resale values jumped more than $170/sq. ft. for green buildings, compared with their non-green neighbors. This value can be captured for long-term property holders, too. For example, the Haverford School, Haverford, PA, undertook a $28-million restoration and expansion for an upper school and administration building to meet the educational needs of information-age students within and adjacent to a historical 1903 hall. The 10

COMMERCIAL BUILDING PRODUCTS

with a visioning session in the earliest part of the planning phase to establish a description of a futurestate based on shared values among the various stakeholders,” Brotman explained. For WXY’s work on the Drawing Center, the client’s planned expansion strategy led to a feasibility study. The cultural group had long considered a highprofile new building at the World Trade Center site, and compared that with another site several blocks away. The museum leadership eventually decided to stay at its existing, and iconic, location, said Layng, based on the favorable ROI of an extensive renovation including new gallery interiors, MEP systems, skylights, and stairs for the 19thcentury loft building. Behind the decision was a careful accounting of organizational needs and longterm vision, followed by a detailed analysis of design options and associated costs. “From these granular details come the inspiration and foundation of truly great projects, where their unique attributes fully serve the core of each organization’s goals,” said Brotman. “But this is only the case if the planning phase has thoroughly nurtured these granular details to generate something larger from them.” Kelley of MGA Partners, a firm that has expertise in university live-learn environments, agreed. “Often our challenge as the architect and planner is to help shape a new organizational system while adapting physical spaces to accommodate how they work.” The many different approaches to successful renovation boil down to extensive planning that involves everyone with a horse in the race. That key element, however, may be just about the only thing any given group of renovations has in common. As the saying goes, if you’ve seen one renovation, you’ve seen one renovation. Each project brings enough challenges and opportunities to keep the entire team on their toes for the duration.

For the Haverford School, MGA Partners restored the 1903 Wilson Hall, designed by noted architects Fred Furness and Allen Evans, and paired it with a sophisticated modernist expansion for a major new academic building certified LEED Gold.

JUL/AUG 2013

LEED Gold landmark facility is also a teaching tool for environmental responsibility, according to Daniel F. Kelley, FAIA, senior partner with MGA Partners, Philadelphia, and lead designer. “The project incorporates many strategies to minimize the building’s carbon footprint and create a healthy environment for learning,” said Kelley. “It has launched the school’s heightened commitment to sustainable practice across campus.” One example: an array of specialized meters and controls that give students and teachers real-time feedback on energy and water usage.

More than mere looks Other retrofit and renovation projects are geared toward aesthetic and performance upgrades, such as exterior recladding and overcladding. A number of school districts and healthcare providers are adding continuous exterior insulation, or CI, to existing buildings by overcladding. In addition to a renewed look, it’s an effective technique for improving acoustics and the effective R-value while controlling condensation and air infiltration. Yet some renovation approaches don’t work well. In many cases it’s because the old building can’t support the kinds of renovations envisioned, leading to costly added work. But usually projects fall short of expectations because the goals and the design vision are out of alignment, said Jay M. Brotman, AIA, a partner with the architecture firm Svigals + Partners, New Haven, CT. “We use a process of lab planning called Phusion that is ideal for these complex renovation projects,” said Brotman, who recently led the transformation of a corporate complex in New Haven, into the W-B 24 scientific research hub for Yale Univ.’s growing West Campus Integrated Science & Technology Center. “Phusion begins

Get free product information at www.cbpmagazine.com

Chris Sullivan is principal of C.C. Sullivan, a Montclair, NJ, marketing firm specializing in the commercial-building market.

for free information, CIRCLE 1 and visit our digital magazine at www.cbpmagazine.com/digital/julaug2013.

Don’t worry, she’s in the

SafeZone

Intelligent Door Closer with On-Board Sensor

Scan this Microsoft® Tag using your mobile phone. Download the free mobile app at http://gettag.mobi

SafeZone senses movement in the opening and holds the door open, creating a “zone of safety”. Extends the life of the opening by limiting unnecessary door cycles Provides energy savings, fire code compliance, and increased security Reduces damage to doors and frames To learn how, visit safezone.nortondoorcontrols.com

For free information, circle 204

feature DOORS The Sarasota Police Headquarters is an example of a whole-building solution. It features an impact-resistant curtain wall and entrances, including the 1600 Wall System1 curtain wall and 350 IR medium-stile entrances from Kawneer North America. Photo by Greg Wilson Group.

Blast Mitigation T Demands Careful Attention Well-planned blast mitigation protects buildings and saves lives. Donnie Hunter, Kawneer North America 12

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

hreats to our national security are everpresent in today’s global society. Within seconds, buildings can be irreparably damaged and landscapes can change. Increasing the safety of building occupants and preserving human life is the primary goal of blast protection. The demand for blast-mitigation products is increasing in new and retrofit building applications, giving architects a unique opportunity to safeguard human lives. Determining which fenestration solutions and systems to specify for blast mitigation is a formidable responsibility. Making the right decision lies in understanding how the products are produced and what they’re designed to do. Developing high-performing blast-mitigation solutions involves several interdependent steps to ensure the effectiveness of the products. Step One: Understanding Blasts. According to the Oxford Dictionary, a blast is “a destructive wave of highly compressed air spreading outward from an explosion.” Hazards resulting from a blast include flying glass shards, building components, shrapnel, dirt, rocks, and debris, leading to possible structural damage and/or building collapse. Fenestration

Get free product information at www.cbpmagazine.com

products cannot provide complete protection from an explosion, but in the unlikely event of a blast in or near a building, products designed to address blast hazards can help reduce the damage. When looking at the nature of a blast there are two elements to understand: the charge weight and the standoff distance. The charge weight is the amount of explosives used (TNT equivalent), while the standoff distance is the distance of the point of detonation from the target. Ultimately, the greater the standoff distance, the slighter the explosive threat to the building or target. Step Two: Assessment and Testing. According to the American Architectural Manufacturers Association (AAMA), Schaumburg, IL, the conditions for blastmitigating fenestration systems include limiting flying shards, glass preservation, frame support, and wall integrity. These criteria are all taken into consideration during product evaluation. The first step to any blast-mitigation project is a thorough threat assessment by a third-party consultant to determine the estimated size and nature of the potential explosive device, as well

ST CK

W TH WHAT W RKS. Flintlastic® SA Self-Adhering Low Slope Roof Systems Good products stick around. With superior adhesion for exceptional wind uplift resistance, Flintlastic® SA is a preferred application for all commercial low slope roofing. The self-adhering SBS modified bitumen material is easy to install and provides long system life.

Installs fast. No torches, no hot asphalt, no fumes or mess. Stays cool. Available with patent-pending, solar reflective CoolStar™ granule technology.

To learn all about how you can earn “No Limit” Rebates on all Flintlastic SA products, log onto www.certainteed.com/Pros/Rebates-Rewards.

For free information, circle 205

feature DOORS Kawneer’s 350 IR medium-stile entrances and IR 500/501 framing system, shown on the Tarpon Springs, FL, public-safety building, can offer protection from explosions. Photo by Gordon Schenck, Jr.

as the standoff distance. The consultant will evaluate issues such as the likelihood of an attack and how close a vehicle or carrier can get to a building. Risk-analysis software and site surveys help blast consultants determine the answers to those questions and more. Whatever the method, this step is critical and the results must go to the design team as the foundation for the project design. After the initial threat assessment, several test methods that simulate the effects of an explosion can measure blast resistance. These methods include: • Static testing, an economical method that employs the conventional static-testing methods used to test fenestration products. • Shock-tube testing, a moderate-cost method that uses a compressed-gas charge or a live explosive device to achieve the positive pressure of an explosion. However, this kind of test usually lacks negative-phase effects. • Open-air arena testing in which an actual explosive charge is positioned at the projected standoff distance. The most realistic and costly method, it produces positive- and negative-phase blast effects. 14

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

The blink of an eye The blast duration of a large explosive device is typically in the range of 28 to 42 milliseconds, which is roughly an eighth of the time it takes for an eye to blink. Destruction can vary greatly based on distance and the size of the explosive, so thorough testing can provide vital insight. The shock-tube and arena-test methods use a number-zoned “witness chamber” to help measure the effects of debris entering the room as a result of the blast. The performance of the glazing system is determined and given a performance condition or hazard rating relative to the testing standards. Building blast-resistance requirements, known as blast mitigation standards (BMS), are driven by the size of the explosive device and distance to the target. The BMS is typically expressed in pounds/square-inch•milliseconds (psi-msec) of reflected pressure and psi-msec of impulse. Without these elements, the BMS is incomplete and the building is likely to be inadequately protected. During this process, testers evaluate the building and wall assessment/reinforcement, addressing design and product options as

Get free product information at www.cbpmagazine.com

well as the blast resistance of the products and attachment methods. The evaluation and assessment must look at the products as a system and examine how the various elements work together. Key factors to consider include: • The glass can break but cannot send flying shards into the room. • The glass lite must stay in the frame, along with all interior window components. • The frame must remain anchored to the wall. • The wall must resist the load and retain the frame. Depending on building and construction methods, materials, and construction, several wall-anchoring options are offered: • Basic trim and clip, usually suitable for lowblast-load applications • Expansion and adhesive anchors • High-performance grout-filled anchors, particularly effective in retrofit applications where support for high blast loads requires tying together unrelated construction elements or deep anchoring. Highly skilled glazing contractors and window installers are essential to the overall process and critical to assuring proper

Unparalleled Performance.

Capture. Transfer. Deliver. Seems simple, right? In actuality, itâ&#x20AC;&#x2122;s taken us 20 years of research and development to perfect our Solatube Daylighting Systems. The first choice for the educational market, our systems use advanced optics and patented technologies to deliver reliable and consistent light output for unparalleled performance regardless of geographic location or building orientation.

Fo r yo u r l o c a l S o l at u b e D ay l i g ht i n g E x p e r t C a l l 8 8 8 - 8 5 0 - 8 076 E m a i l c o m m s a l e s@s o l at u b e.c o m V i s i t w w w.s o l at u b e.c o m For free information, circle 206

feature DOORS anchorage and craftsmanship. These teams work closely with project designers, consultants, and engineers to create safe spaces that help protect building occupants and anyone nearby. Step Three: Security Criteria and International Standards. Today the design process for most government and military structures must take blast demands into account. More and more, the education sector is also considering them. In addition to assessment and testing, architects are required to specify products that meet certain government and international standards. While no criteria or testing methods can promise total protection from explosions, government agencies designed these standards to consider the effects of explosive events on their facilities and offer steps to mitigate the extent or probability of damage. Three common standards are: • Security criteria by the Interagency Security Committee (ISC) and the General Services Administration (GSA), both based in Washington. Initially established to address glazing in all federal buildings after the bombing of the A.P. Murrah Federal Building in Oklahoma City, the GSA security criteria resulted in the increased use of blast-resistant fenestration products in federal courthouses and similar government buildings. The ISC took it further by developing its own security criteria, which were approved for use in all new GSA buildings and major renovation projects. These criteria, intended to reduce potential hazards, require that windows be designed to mitigate the risk from flying glass fragments in the case of an explosion. These measures were designed with the understanding that not all fenestration products will survive a blast. • ASTM International Standards: Similar to the ISC/GSA performance, West Conshohocken, PA-based ASTM International’s ASTM F 1642-04 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loading establishes a testing method that evaluates levels of protection. These criteria require that glazed-window products meet performance levels that correspond to specific levels of protection. • Department of Defense (DoD): The Department of Defense, Washington, developed a blast-mitigation standard to minimize hazards caused by glazing to personnel. Know as the Unified Facilities Criteria (UFC)-DoD Minimum Antiterrorism Standard for Buildings, the standard applies to windows, skylights, and glazed doors on new and existing inhabited buildings. In February 2012, the UFC 4-010-01 was revised with several significant changes. These include expanding the applicability of the minimum antiterrorism standards to the purchase of existing buildings, visitor centers, museums and visitor-control centers and expanding the requirements for design submittals, calculations, test reports, and narratives. 16

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Additionally, the revised standard redefined conventional-construction standoff distance based on the type of construction materials and structural systems, which enables a project team to evaluate the resistance and strength of the structure with the standoff distances at a given site. Other modifications to the standard affect the requirements for unobstructed spaces and identifying required access control at building entrances. Step Four: Whole-Building Solutions. Anyone evaluating products for blast mitigation must think about the building as a whole. Windows, curtain walls, storefront framing, and entrances are all tested for blast

Windows such as the 8400TL single-hung windows from Kawneer, shown on Converse Hall at James Madison Univ., Harrisonburg, VA, can provide blast resistance. Photo by Gordon Schenck, Jr.

mitigation to ensure a safe building envelope. A comprehensive building solution is critical for optimum protection. A great deal can be accomplished with today’s glass and systems technology. As products are evaluated for blast mitigation, it is important to consider what other safety, sustainability, and overall occupant comfort features they may also have. When specifying products for schools, for example, daylighting and thermal performance are often considerations right along with safety. Many studies over the years indicate that natural daylight stimulates the brain more than artificial light. The same studies suggest that student performance increases where more direct daylighting is used. Natural ventilation and emergency egress are two more factors that architects have to consider when designing schools and educational facilities. The combination of aesthetics, functionality, code requirements, and simple logic plays a major role in an architect’s desire to use glazed entrances, storefronts, curtain walls, and operable windows. However, some are suggesting that schools or government facilities should be windowless or have fewer glazed openings to be safe.

Get free product information at www.cbpmagazine.com

Plans put into practice Government and federal facilities identify security as a top priority and often consider whole-building solutions. One such example is the Sarasota Police Headquarters in Sarasota, FL. When architects from Winter Park, FL-based Architect Design Group Inc. were developing the six-story, $38-million building they designed a facility that would achieve high energy performance and daylighting while delivering security against natural and manmade threats, balancing sustainability and security. The harsh Florida environment and hurricane-prone location was another major reason designers considered a comprehensive building solution. The building contains more than 40,000 sq. ft. of exterior glass and 6,000 sq. ft. of interior glass. The exterior of the building features an impact-resistant curtain wall with insulating, laminated, low-e, impact-rated glass as well as impact-resistant entrances. A high-performance framing system used on the interior and several doors provides strength and durability. The design also allows ample daylight, which is important in public or government facilities where people often spend a great deal of time indoors. The police headquarters achieved Leadership in Energy and Environmental Design (LEED) Silver certification from the U.S. Green Building Council (USGBC), Washington. By selecting products that achieved performance, safety, and aesthetic goals, the design team was able to provide occupants with a secure facility as well as energy and daylighting benefits, which contribute to overall occupant comfort.

The human element Buildings can affect their occupants by enhancing moods, affecting health and productivity, and protecting them from natural or manmade disasters. Each product in a building plays a role in the overall influence on its occupants. Incorporating any element into a building requires careful consideration, but when it comes to blast mitigation designed to safeguard human lives, thorough assessments, attention to regulations, and whole-building consideration are key elements in specifications. Protecting what’s inside is critical and selecting products with the highest levels of performance and defense help accomplish this objective. After all, it’s what–and who–is inside that matters most. Donnie Hunter currently serves as the architectural manager for Kawneer North America, Norcross, GA.

for free information, CIRCLE 3 and visit our digital magazine at www.cbpmagazine.com/digital/julaug2013 and click on the icon.

Time for a change

A retrofit as easy as L-E-D 15w • 830lm • Adjustable • 50,000 hours Looking for a fast, easy 6” LED downlight retrofit? The 15w Hornet LED Retrofit replaces up to 65w incandescent light sources. Small in size, but big on performance, the Hornet LED Retrofit provides crisp color, high performance, and adjustability that you did not have before. Once bitten by the buzz around the Hornet LED retrofit, you’ll never want or need anything else. To learn more visit us at amerlux.com or call 973.882.5010.

For free information, circle 207

feature RESTROOM FIXTURES

Touch-Free Fixtures Tap Into Hygiene Touch-free innovations offer a number of benefits to a facility, including increased cleanliness and hygiene, operational savings, and a level of sophistication to its restrooms. Sensor-operated faucets are an excellent choice in locker rooms for hygiene as well as eliminating the chance of water being left running.

Kristin Meyers, Moen Commercial

ealth-conscious end-users are behind the demand for hands-free products in commercial restrooms. Today’s society is germ obsessed, with industry reports estimating that approximately 30% of people avoid using a public restroom due to their fear of germs and other bacteria that reside on the surfaces of fixtures they would touch. However, the public is more likely to use restrooms with hands-free fixtures instead of manual types. The result is that specifiers and building owners are incorporating an increasing number of touch-free products in new-construction, renovation, and retrofit projects. In today’s restroom stall, there are two primary touch-free elements that help reduce the spread of germs and bacteria: • Automatic toilet-seat-cover dispensers: Industry studies on toilet seats found that in restaurants, gas stations, and other public places, 97% of toilet seats harbor micrococacceae, which can cause skin reactions. Installing automatic toilet-seat-cover dispensers separate the user from such bacteria. 18

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

•

Sensor-operated flush valves: High-efficiency flush valves increase water savings for commercial properties and can significantly reduce contamination in a restroom. These flush valves also promote energy savings with the help of an infrared sensor beam that activates a flush cycle only when a user is in range, ensuring optimal performance, efficient operation, and cost savings. Visitors are also accustomed to touchfree elements in the sink area of a commercial restroom. When these products are used in combination, visitors can remove as much as 99.9% of germs, according to Richard DiPaolo, an expert in the janitorial/sanitation industry. • Automatic soap dispensers: Dispensers automatically distribute a pre-measured amount of soap for hygienic hand washing, eliminating bacterial colonies left behind on traditional products. They also feature easy-to-use bag refills that further reduce contamination. • Sensor-operated faucets: Hands-free electronic faucets are a smart choice to help reduce the

Get free product information at www.cbpmagazine.com

spread of germs in any facility. It’s no surprise that professional groups give these fixtures good grades. A joint statement issued in April 2011 by the American Society of Healthcare Engineers, Chicago, and the Association for Professionals in Infection Control and Epidemiology, Washington, praised electronic faucets because they “lessen the risk of recontamination of hands after washing.” Sanitary control isn’t the only benefit offered by electronic faucets. They also help conserve water and reduce the chance of flooding. The plumbing-management team at Vanderbilt Univ. Hospital, Nashville, TN, reported that the use of hands-free electronic faucets for the past seven years has been a great success. They install electronic faucets in public areas, so there’s no worry about visitors turning something on and walking away with it still running. In other words, these fixtures are a win for everyone. • Automatic paper-towel dispensers and electronic hand dryers: While hands-free faucets play an important role in keeping bacteria off hands

in a commercial restroom, automatic paper dispensers are also an integral component. The Centers for Disease Control, Atlanta, recommends the use of paper towels over hand blowdrying devices. Research shows that end-users are more likely to choose paper towels, leading to less cross-contamination. Damp hands are 1,000 times more likely than dry hands to contract and spread germs.

Reliable, touch-free restrooms There’s no denying the popularity, demand, and need for touch-free products. However, if the products don’t perform properly on demand, it is frustrating for the end-user. Consider the following factors to limit operation issues, ensuring these fixtures perform reliably from the user’s entrance to exit. • High-quality products: When specifying automatic fixtures in a commercial restroom, be sure to select high-quality products. Specifiers should be careful about selecting electronic products from unknown or obscure manufacturers just because prices are lower. Reputable manufacturers provide sensor-operated fixtures that feature durable, solid brass, chrome-plated construction to withstand constant use. Vandal-resistant features are also a plus, preventing tampering or damage that can render them inoperable. Higher-quality products also include more advanced and reliable electronic components that help limit over-flushing and false sensing, two of the most common complaints associated with touch-free restrooms. • Select the right settings: For a touch-free restroom to receive high marks, the facilitymanagement team must be familiar with traffic and usage patterns. Observe the flow of the restroom and see where and why lines are forming. In high-traffic locations or during peak usage times and seasons, it’s important to adjust the settings on sensor-operated products accordingly. For automatic paper-towel dispensers, greater paper lengths and shorter delays between paper feeds will keep visitors moving through more quickly, whereas shorter lengths and longer delays work well in facilities where time is not as crucial. In the stall, dual-flush valves adjust automatically, using advanced electronics to ensure that every flush uses the right amount of water. Dual-flush valves rely on the timing of the individual in the stall to determine the strength of the flush in commercial water-closet applications, automatically reducing water usage by as much as 37% without sacrificing performance. The sensor-operated valves allow the user to be in range for as long as 60 seconds for a reduced 1.0-gallon flush. After 60 seconds, a full 1.6-gallon flush is activated, potentially saving thousands of gallons of water each year.

Public restrooms of all kinds conserve water with touch-free technology installed.

Keeping things flowing Products that feature a mechanical manualoverride button ensure that systems are always operational. If a product lacks such controls, the only way to solve functionality issues is to replace faulty components. If the warranty has lapsed or the manufacturer doesn’t cover replacement parts, keeping products operational can be costly.

Since touch-free products are automated, it’s important to perform regular service and maintenance checks to ensure that batteries are not dead and dispensers are not empty, leaving products unusable until the issue is resolved. If a facility does not have the resources to keep up with battery checks and replacement on a regular basis, selecting products with optional AC power adapters will keep restrooms running smoothly. Touch-free restroom technology will evolve and advance as available products, features, and equipment continue to improve. Ultimately, touch-free innovations offer a number of benefits to a facility, including increased cleanliness and hygiene, operational savings, and a level of sophistication to its restrooms. With the right products in place and appropriate maintenance, touch-free fixtures and devices will reliably provide these benefits for years to come. Kristin Meyers is marketing and product manager for Moen Commercial, North Olmsted, OH.

for free information, CIRCLE 4 and visit our digital magazine at www.cbpmagazine.com/digital/julaug2013 and click on the icon.

For free information, circle 208

Renovate!

PEX Pipe Big Factor In Hotel Renovation Using PEX-a piping makes possible plumbing replacement in a historical building without tearing out walls. Jayson Drake, Uponor North America

istorical buildings restored to their original look and feel can be awe-inspiring on the outside and exquisite within. But getting to that point while meeting all of the codes and regulations applicable to this special type of project can involve numerous challenges for building designers and installers. Nowhere are these complexities more acute than in the modern mechanical systems that must somehow fit within the confines of structures designed and built long ago to accommodate something far simpler and smaller. “There are lots of hoops and hurdles the owner of a historical building must jump through during the renovation process,” said Todd Ringgold of Palmer Mechanical, a Tulsa, OKbased contractor that has made renovations of historical buildings a major part of its business in recent years. High ceilings—“at least as high as the original building, if not higher,” he says—and plaster walls are musts, of course. While the interiors hearken back to an earlier era, all of the amenities must be thoroughly modern and efficient to attract buyers and tenants. Updates typically include larger bath and kitchen facilities equipped with the latest conveniences.

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Proper performance of those amenities demands an equally modern infrastructure, none of which can be conspicuous or take up much space to avoid detracting from the authenticity of the restoration. The updated wiring, ductwork, conduit, and piping for the communications, HVAC, electrical, and plumbing systems usually must fit into the available air space between the floors of these buildings, Ringgold said. “Essentially, we must squeeze a lot of piping into a very small chase.” The Palmer Mechanical portfolio contains five historical-building renovations in Tulsa over the past decade, including the Philtower Building, the former Tulsa City Hall (converted into a hotel) and—perhaps the most notable of all—the landmark, $40 million Mayo Hotel project. All were design-build projects that allowed Palmer to do its own system-design work to match the infrastructure to the radically altered configurations of the buildings after they had been completely gutted. “In these buildings, the newly enlarged bathrooms and kitchens don’t line up from one floor to the next as neatly as they did in the older structures with their simple tub-sink-toilet layouts,” said Ringgold, who has served as Palmer’s project

Get free product information at www.cbpmagazine.com

manager on each of the jobs. “That’s because the new bathrooms usually include large, marble-andtile showers with whirlpool tubs, marble-topped vanities, and bigger closets.” While carving out additional space for larger, better-appointed bathrooms, Ringgold and his crews still must leave enough room for equally well-appointed kitchens, living areas, and bedrooms. “The piping, wiring, venting, and so forth have to be completely redone,” he explained.

PEX-ability The design-build process gave Palmer Mechanical another advantage: more decision-making authority over the types of building materials used on the projects. This enabled the company to use a different type of plumbing pipe: crosslinked polyethylene (PEX-a) instead of copper. PEX-a’s flexibility and ease of use are major labor-saving, stress-reducing improvements over the rigid copper and plastic systems of the past. Just as the inherent characteristics of copper led to its replacing old-fashioned galvanized steel and cast iron, the significant benefits of flexible PEX-a have made it an ideal solution for meeting

▲

The Mayo Hotel has been a Tulsa, OK landmark since 1925, although it stood empty for 20 years before its restoration.

▲

The spectacular lobby at the Mayo reflects its history in authentic style. The PEX-a pipe used for the new plumbing system was installed with minimal damage to the existing structure.

▲

The Parlor Room’s stone floor conceals a network of PEX-a piping that provides radiant heating to the room and the rest of the hotel.

bought it for $250,000. Their vision was to restore its special character and former glory. The final result is now an elegant mix of hospitality and residential spaces, with 102 hotel rooms and 70 apartments ranging from 450 to 1,200 sq. ft. and offering views of the nearby Arkansas River, the BOK Center, and downtown Tulsa. In its own way, the Mayo’s refurbished infrastructure is as impressive as its restored interiors and exterior. Galvanized-steel mains deliver cold water to each floor of the hotel, with the run-outs to the living spaces made of AquaPEX PEX-a pipe furnished by Uponor North America, St. Paul, MN. Each residential space has its own water heater, although hot water for hydronic space heating is delivered by one of the boilers located in a basement mechanical room. This setup entails two piping systems on each floor–domestic hot water and space heating–each made of PEX-a and running from each residential unit to one of two nearby mechanical rooms on each level. “We installed about 70,000 feet of AquaPEX for the plumbing system and another 51,000 feet of Wirsbo hePEX for the hydronic heating and cooling runs,” reported Ringgold, who led a 20- to 25-man crew during an installation process that spanned five months. It is important to note that the Wirsbo hePEX (also manufactured by Uponor North America), features a special oxygen barrier to protect ferrous components in the system from corroding through contact with oxygen in the water.

A lot of pipe

the demands of historical renovation. Manufactured with the Engel method, which results in a very high degree of molecular crosslinking, PEX-a offers exceptional durability and flexibility. That flexibility, combined with the availability of PEX-a in long coils, eliminates many of the fittings and connections required in rigid metal- and plastic-plumbing systems. Fewer fittings means less material, less installation labor, and fewer potential leak points, all resulting in more efficient installs at lower costs. Ringgold happily put these advantages to work in all of the renovation jobs he has managed for Palmer Mechanical in recent years. His own first encounter with PEX-a came eight years ago at the behest of the new owner of a hotel in downtown Tulsa. Re-piping that building’s entire plumbing system with PEX-a, Ringgold estimated his labor costs were half what they would have been had he replaced copper with copper. “Once we got on the project, we discovered we could re-pipe the building at a faster pace than the rest of the trades could renovate the rooms,” he recalled. “By the end of the project, I was a true believer.”

With their special demands and limited space, the subsequent renovation projects he managed for Palmer only strengthened his conviction. Ringgold had previously done plumbing-service work in many of these projects, so he was familiar with their peculiarities and understood how a full-fledged gut renovation with a sharp eye on history would only lead to bigger construction hurdles.

The Mayo The most impressive example is the Mayo, also located in downtown Tulsa. Built in 1925 by brothers Cass A. and John D. Mayo, the original 18-story tower housed 600 guest rooms—each with its own ceiling fan, a major selling point— and served as a gathering place for Tulsa high society and visiting dignitaries and celebrities. (Oilman J. Paul Getty once made the Mayo his full-time home.) In 1980, the venerable hotel achieved recognition on the National Register of Historic Places, even as it struggled to regain its fading, grand-hotel luster. Following the last of several botched attempts at restoration, the Mayo sat idle for nearly two decades until 2001, when the Snyder family

All of this piping—nearly 23 miles worth—had to be stacked or racked with the electrical, fire-sprinkler, venting, and communications lines in chases concealed inside the 9-foot-high ceilings above the hallways on each floor. The dimensions of these overhead chases, Ringgold estimates, were only “three or four feet wide and four or five inches in depth,” hardly big enough for a grown man to crawl through, let alone one charged with making leak-free pipe connections. “That’s where PEX-a really comes into play for us,” said Ringgold. Installing long, straight runs of PEX-a pipe of as much as 140 feet within these cramped quarters was challenge enough. The saving grace: The PEX-a pipe required no connections since the pipe comes in coils up to 1,000 feet in length. Using straight lengths of copper would have required soldering a pipe joint every 20 feet. “Shoehorning an installer into those little spaces with a torch would’ve been just asking for trouble. Why mess with fire in tight spaces, especially one with hard, plasterboard ceilings?” asks Ringgold, who figures that using copper would have boosted installation costs by as much as 30%.

PEX-a perks The special characteristics of PEX-a pipe also deliver other time- and money-saving advantages

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS

Renovate! in a large and complex renovation project such as the Mayo. Bend instead of break. Ringgold recalled one especially difficult part of the installation in which the layout called for routing plumbing lines through an attic area above the hotel ballroom. This space was “jammed with electrical gear,” so his crews needed to circle the lines around the equipment. With copper, every change in direction necessitates cutting the pipe and soldering two connections. With PEX-a, which has the smallest bend radius of any type of PEX, it’s simply a matter of bending the pipe in the desired direction. In this instance, the ease-of-use advantage had benefits beyond speed, given the precarious location of the attic above a set of stairs. “Instead of trying to sweat copper connections while perched 25 to 30 feet in the air over a stairwell,” Ringgold said, “we were able to maneuver a continuous length of PEX-a pipe through the hangers in much less time and with less hazard and cost.” Swift, sure connections. In places where pipe joints are unavoidable, making them is relatively easy when installers capitalize on the natural ability of PEX-a to expand and contract, using an ASTM F1960 cold-expansion connection. One of the simplest, strongest, and most reliable connections available, it involves four simple steps: 1. Cut the pipe with a plastic-pipe cutter. 2. Place a PEX-a expansion ring on the end of the pipe. 3. Expand the pipe and the ring with a Milwaukee ProPEX M12 or M18 expansion tool. 4. Insert the larger-diameter fitting. The pipe and ring will then immediately and naturally begin contracting back to their original shape, compressing tightly against the primary and secondary fitting barbs with as much as 7,800 pounds of radial force. There’s no deburring, torches, flux, solder, cements, or curing or cooling time. The resulting permanent connection holds tight in tests of as much as 1,000 pounds of pull force. In addition, since the pipe is expanded before the fitting is inserted, it’s impossible to dry-fit the connection, eliminating the possibility of incomplete fittings and the resulting blow-off leaks. As Ringgold noted, “The flexibility of PEX-a gave us not only much more maneuverability for the install, but also far fewer chances for problems post installation.” Superior heat retention. The Mayo project was Palmer Mechanical’s first experience using PEX-a pipe for heating and cooling lines, and Ringgold was impressed by the fact that his crews did not need to insulate the pipe. Not only does PEX-a resist condensation on coldwater lines better than copper, but it also offers superior heat retention in hot-water supply runs. At the Mayo, the system-temperature levels were 22

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

In Brief: The Mayo Hotel Architect: Built in 1925, the original hotel was designed by George Winkler in the Chicago School vernacular developed by Louis Sullivan. The base of two-story Doric columns supports 14 floors with false terracotta balconies, a two-story stone crown, and a dentiled cornice. Glamorous surrounding and advanced features, such as running ice water and ceiling fans in each room made the Mayo a wellknown local hangout for celebrity entertainers such as Bob Hope, Mae West, and Oklahoma native son Will Rogers. Before and After: The Mayo Hotel originally had 600 guest rooms; the redesigned, renovated building includes 102 hotel rooms and 70 luxury loft apartments. Try, Try Again: Six renovation attempts failed before the current owners purchased the property and successfully completed a refurbishment that restored its original look while delivering modern amenities to residents and guests—all while maintaining its place on the National Register of Historic Places. “We did not buy this building planning on doing any of this with it,” said owner Macy Snyder Amatucci, who is director of sales at the Mayo. “That wasn’t the plan. That was a dream, but a very farfetched dream. We never thought it would end where it is today. We’ve come a long way.”

such that no insulation was needed. “That saved a lot of installation time as well,” said Ringgold.

The voice of PEX-perience Todd Ringgold offers some tips for plumbing and mechanical contractors looking to tackle a large historical renovation: Familiarize yourself with the relevant rules and regulations. A smart contractor becomes thoroughly familiar with what local authorities will allow and then plans the project accordingly, down to minute details. On occasion, these rules may seem to border on pure fussiness, but that doesn’t mean a contractor will have much luck arguing his way free of them. “At the Mayo, for example, they told us exactly

Get free product information at www.cbpmagazine.com

where we could position cleanouts—and the hallways were definitely off limits!” Ringgold recalled. “They also specified the paint color for the windows. Sounds like small stuff, I know, but that’s how seriously they take the issue of historical authenticity. There were no cleanouts in the hallways of the original structure, so there mustn’t be any in the renovated building either.” Leave yourself some “wiggle room” in your budgeting for surprises. In fact, a contractor can pretty well count on more than one close encounter with the entirely unexpected. That comes with the territory when doing historical renovations, warns Ringgold. “You don’t know what you’re up against until you start opening up the building. Then it may be too late.” Ringgold believes that PEX-a is the way to go for plumbing and heating systems. Although he embraced PEX-a quickly after his initial experience in 2005, he knows that some contractors, engineers, and owners remain unconvinced. Among those working with the tools, the biggest objection he has encountered has been an aesthetic complaint: It’s not as pretty as copper—an objection that Ringgold finds bewildering considering the economic arguments for PEX-a, including the comparatively high and rising cost of copper. That cost, in turn, makes copper a prime target for jobsite theft. Still, some of the trades remain skeptical of plastic in general for reasons beyond appearance. Many of these professionals hesitate because of their long, negative memories of polybutylene (PB) and the problems failed PB systems caused builders and installers around the country in the early 1990s. But the problems of gone-but-notforgotten PB have nothing to do with PEX-a, which was first commercialized in Europe in the 1970s and came to North America in 1984. Ringgold pointed to the length of the warranty for PEX-a versus copper: In Uponor’s case, that protection extends 25 years on AquaPEX pipe and the ProPEX fittings installed by a factorytrained professional. “What copper producer offers that kind of warranty?” he asked. “For me, it provides so much peace of mind.” The most important assurance of all for Ringgold is the trouble-free performance of the systems. “We have seen no problems and no complaints with the PEX-a systems on any of these historical-renovation projects, including the very first one that served as our learning curve. Their system still runs like a top.” Jayson Drake is the director of plumbing and fire safety at Uponor North America, St. Paul, MN.

for free information, CIRCLE 2 and visit our digital magazine at www.cbpmagazine.com/digital/julaug2013 and click on the icon.

or..

y hw CHOOSE? energy savings

Pure White™ light

With EYE Cera Arc®, you can have both energy savings AND Pure White™ light.

EYE Lighting has developed the awardwinning family of Cera Arc® Ceramic Metal Halide lamps that provide the benefits of energy savings, beautiful Pure White™ light with great color rendering, high lumen output, high lumen maintenance, and extremely long life. Several wattages have been developed in conjunction with controllable electronic

PROUD WINNERS

CERA-ARC ® CERA-TEK

™

Ceramic Metal Halide Lamps

“Uni que, Innovative, Sig nific ant ”

CERA-ARC ®

Ceramic Metal Halide Lamps

“Continued Innovation S uccess”

Call (888) 665-2677, visit eyelighting.com, or e-mail sales@eyelighting.com to learn more about how EYE Lighting can help lower energy costs while providing beautiful Pure White™ light — without compromise.

True Lighting.™

PROUD WINNERS

20I2

20II

ballasts, providing unprecedented control and even greater energy savings.

CERA-ARC ®

Ceramic Metal Halide Lamps

“Cont inued Innovation S uccess”

For free information, circle 209

advertising RENOVATE! MARKETPLACE Products from the manufacturers on the following two pages can help you with your renovation projects.

E X T E RIO R S

Carlisle SynTec Systems

Cer tainTeed Corp.

Duro - L ast Roofing Inc.

Carlisle, PA 8 0 0.479.6 8 3 2 w w w.c arlislesyntec.com

Valley Forge, PA 8 0 0. 2 3 3.8 9 9 0 www.certainteed.com/products/roofing

S aginaw, MI 8 0 0. 2 4 8.028 0 w w w.duro - last.com

For free information, circle 250

For free information, circle 251

For free information, circle 252

MBCI

DuPont

Metallic Building Co.

H ouston 877.713.6 2 2 4 w w w.mbci.com

W ilming ton, DE 8 0 0.4 4 .t y vek www.weatherization.tyvek.com/NFPA285

H ouston 8 0 0.75 5.73 3 9 w w w.metallic.com

For free information, circle 253

For free information, circle 254

For free information, circle 255

Kawneer Co. Inc.

Hanover Architec tural Produc ts

N orcross, G A 770.8 4 0.6 4 4 9 w w w.kaw neer.com

H anover, PA 8 0 0.4 26.4 2 4 2 w w w.hanoverpavers.com

For free information, circle 256

For free information, circle 257

L IG H T I N G

A merlux

EverL ast Lighting Inc.

Emergi - Lite

Fair field, N J 973.8 8 2 .5 010 w w w.amerlux.com

Jackson, MI 8 8 8.3 8 3.7578 w w w.everlastlight.com

Memphis, T N 8 8 8.9 3 5.3 6 0 5 w w w.emergi - lite.com

For free information, circle 258

For free information, circle 259

For free information, circle 260

E Y E Lighting International Mentor, O H 8 8 8.6 6 5. 2677 w w w.eyelighting.com For free information, circle 261

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Get free product information at www.cbpmagazine.com

advertising RENOVATE! MARKETPLACE I N T E RIO R S

Forbo Flooring Systems

Max xon Corp.

Scranton Produc ts

H azleton, PA 8 0 0.8 4 2 .78 3 9 w w w.forboflooringna.com

H amel, M N 8 0 0.3 5 6.78 87 w w w.max xoncorporation.com

S cranton, PA 8 0 0.4 4 5.514 8 w w w.scrantonproduc ts.com

For free information, circle 262

For free information, circle 263

For free information, circle 264

W I N D OWS

D O O R S

Kreiger S pecialt y Produc ts

DORM A

Solatube International Inc.

Pico Rivera, CA 8 0 0. 251.3 3 9 6 w w w.kriegerproduc ts.com

Reamstow n, PA 8 0 0.5 2 3.8 4 8 3 w w w.dorma.com

V ista, CA 8 8 8.76 5. 28 8 2 w w w.solatube.com

For free information, circle 265

For free information, circle 266

For free information, circle 267

H VAC

P LU M BI N G

Aquatherm Pipe

Mars A ir Systems

T hybar Corp.

L indon, U T 8 01.8 0 5.6 6 57 w w w.aquatherm.com

Gardena, CA 8 0 0.4 21.126 6 w w w.marsair.com

Addison, IL 8 0 0.6 6 6. 2872 w w w.thy bar.com

For free information, circle 268

For free information, circle 269

For free information, circle 270

United Cool A ir Corp.

Carlisle H VAC Produc ts

York , PA 717.8 4 3.4 311 w w w.unitedcoolair.com

W ylie, T X 877.4 9 5.4 8 2 2 w w w.c arlislehvac.com

For free information, circle 271

For free information, circle 272

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS

project SECURITY A full-fuselage trainer is the crown jewel of the Charles Simonyi Space Gallery, Seattle. Although the museum was unable to acquire a retired space shuttle orbiter, the trainer is very similar. The FFT was used as a test bed for upgrades to the shuttle fleet and for astronaut training such as extra-vehicular activity (EVA) and emergency egress.

IP Cameras Fly High In Space Museum D

uring their design and manufacture, the space-travel-related artifacts at the Charles Simonyi Space Gallery, Seattle, were top-security projects closely guarded by NASA. Now watchful eyes again protect them and the entire interior and exterior of the newly constructed addition to The Museum of Flight campus. This time, however, some of those “eyes” are IP-based video cameras from Samsung, Ridgefield Park, NJ. Ten Samsung IP cameras, tied into the Museum of Flight’s existing video management system (VMS), help ensure the physical security of the new facilities, artifacts, staff, and visitors. Video from the cameras is used to monitor all activities at the new Space Gallery, including reviewing incidents on the premises to prevent future occurrences, searching for children separated from their parents, and providing a visual deterrent to crime. Video also enables visual inspection of exterior doors to confirm the status 28

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Low-light capabilities meet surveillance needs at high-tech museum. reported by the building’s access-control system. Brandon Knutson, security and safety manager at the Museum of Flight, considered other network camera brands for the new facility but concluded that Samsung cameras offered the same or better features at lower prices. “The image quality is on the top end compared with our other IP cameras,” said Knutson. “Also, the Samsung organization and their local representatives have been genuinely interested and committed to this project.” Other factors in the decision were Samsung’s broad product line, the cameras’ lowlight capabilities, and embedded content analytics.

Get free product information at www.cbpmagazine.com

New cameras expand surveillance Samsung cameras installed to watch the Space Gallery building include three SNB-5000 1.3-megapixel HD box cameras with Samsung SLA-M2882 auto-iris varifocal lenses, used to monitor a public entry, service entry, and admission sales counter. Another three 1.3-megapixel, HD, vandal-resistant, fixed-dome cameras, Samsung SNV-5080, monitor public entries; one is mounted on the exterior of the building to monitor an additional entry point. Two SNP-3301H interior H.264 network pan-tilt-zoom (PTZ) dome cameras mounted at opposite corners of the Space Gallery allow security staff to monitor any violations of established visitor and staff expectations. Two additional exterior vandal-resistant PTZ dome cameras, both Samsung SNP-3120V, sit high on the building’s exterior to monitor parking and the Airpark, an outdoor area with several significant aircraft, including a Concorde supersonic

PHILADELPHIA NOV. 20â&#x20AC;&#x201C;22, 2013 GREENBUILDEXPO.ORG REGISTER TODAY: Join thousands of professionals, innovators, and experts at the world's largest green building conference and expo. PRESENTED BY THE U.S. GREEN BUILDING COUNCIL

For free information, circle 210

project SECURITY passenger jet, the first jet-powered Air Force One, and the prototype Boeing 747. Eight of the Samsung IP cameras are power-over-ethernet (PoE) models with power supplied by a 16-port Altronix (Altronix Corp., Brooklyn, NY) NetWay 16M mid-span. A Pelco (Pelco, Clovis, CA) 24-V power supply powers two exterior PTZ cameras. Knutson created the system specifications and design using the museum’s request-for-proposal process; Aronson Security Group (ASG), Renton, WA, provided the system drawings, installation, and integration. In addition to security benefits, the Samsung cameras also boost operational efficiencies. After hours, video helps to verify the identity of vendors when providing remote access to the Space Gallery. Customer-service staff benefits from the ability to monitor the size of lines at admission counters and to call upon additional service agents as needed. Remote surveillance also enables the staff to confirm the status of tables, stages, and other equipment for private functions.

Part of a larger system The Museum of Flight is a mid-sized campus comprising several buildings. The security staff monitors the video-surveillance system on a regular basis and the system is always recording to post-incident review. Other museum departments have live access to select cameras using their desktop PCs for operational purposes.

Unleash your inner hero. What if your piping systems were invulnerable to corrosion and pinhole leaks? Or if your connections were faster and more reliable than anyone thought possible? And what if your systems helped save time, money, and the planet? With Aquatherm, you can do all that and more. So visit us at Aquatherm.com/savetheday and find out more about the best sidekick you’ll ever have.

aquatherm 30

The videoof storage for the ten surveillance system is Samsung cameras and managed using OnSSI six other IP cameras NetDVMS software and nearby. The system uses Ocularis client software, off-the-shelf PCs and 19both manufactured by to 42-inch LCD screens On-Net Surveillance to monitor video. Systems Inc., Pearl River, All equipment uses NY. The OnSSI NetDVMS uninterruptible power video-management supplies and emergency system runs on two generator backup. Microsoft servers located to minimize network What comes next traffic. Each server uses The museum has onboard HDD storage standardized the use of for live and archived IP cameras moving forvideo. An on-board ward. IP also provides RAID controller provides superior image detail redundancy for the over analog. Knutson operating system and said he sees a “sweet applications. The main spot” balance of image components of the quality and bandwidth network are linked by consumption with 720p fiber and subcomponents HD images provided by are linked by network 1.3-megapixel cameras The exhibit includes the FTT’s cargo bay cabling. There are 51 using H.264 compreswith the inertial upper stage (upper left) and cameras in all, including sion. IP cameras also a Hubble 2 space telescope (center right). 21 IP-based cameras provide easy camera and 30 analog cameras set-up and settings conconnected through video encoders. trol using a Web browser. The Samsung cameras all head-end to a The video system is not integrated with local network room where they are connected other systems, but the museum has wired door to a managed-network switch. A Dell server in contact switches and sensors to the alarm inputs the same equipment rack provides 4 terabytes on nearby IP cameras. This configuration allows the camera to send an email whenever a sensor is triggered. Finally, IP cameras provide easier expansion by using Cat-6 cabling to the nearest network switch and PoE for camera power. The cameras have been invaluable in monitoring exterior doors as contractors and visitors come and go. “The security challenges we anticipate are people crossing physical boundaries around exhibited artifacts, tampering with the artifacts, and too many people occupying the building at one time,” said Knutson. Such application will likely use the onboard intelligent video analytics of the Samsung cameras, specifically the crossing-line and disappearing detection rules. Inside and out, the Space Gallery has stateof-the-art security equipment to protect artifacts that were once extremely high tech. With the assistance and protection provided by the security system, those artifacts will be available to the public even as the system that protects them progresses in the future.

for free information, CIRCLE 17 801.805.6657

www.aquatherm.com For free information, circle 211

and visit our digital magazine at www.cbpmagazine.com/digital/julaug2013 and click on the icon.

project LIGHTING New induction high-bays illuminate the concourses under the stadium’s end-zone seats.

Historic Lambeau Field, home of the Green Bay Packers, is getting an energy-efficient upgrade using induction-lamp technology.

Induction Lamps Light Lambeau O

ne of the National Football League’s most revered stadiums, Lambeau Field in Green Bay, WI, home of the Green Bay Packers, features the only true retro look in the entire league. Recently the structure has been transformed from a football stadium that fans used only 10 days during the season to a Packers cultural center that can be enjoyed throughout the year. Lambeau Field managers also implemented a major lighting overhaul. Powrtek Engineering Inc., an electrical-engineering firm based in Waukesha, WI, searched for a solution that would meet building codes and decrease maintenance costs. The final choice: 200-W induction high-bay fixtures from EverLast Lighting, Jackson, MI. Designed to improve safety and visibility and meet emergency regulations, the induction high-bays offer 100,000 hours of lamp life and an efficacy of 85 lumens/W, making the technology very energy efficient and cost effective. The concourses under the south end zone received 71 induction high bays to supplement existing lighting. Several hundred additional induction fixtures will

High-bay fixtures with induction lamps are saving energy and providing the desired color temperature at the home of the Green Bay Packers.

A 100-year-old overnight sensation

be installed throughout the stadium this winter. “The manufacturer provided a color temperature that we needed as a custom blend at 3,000 K,” said Greg Sadowski, president of Powrtek Engineering. “Additionally, there were strict emergency-lighting specifications that we had to meet. The fixture had to be able to turn on within 10 seconds in the event of an outage. The induction fixtures are doing double duty: They possess the required color rendition in

Induction technology is an electrode-less lamp that has been around for more than 100 years. Due to recent advancements, it has become an effective lighting option for roadways, parking structures, municipalities, warehouses, and largescale facilities. With no electrodes, the lamp relies on the fundamental principles of gas discharge and electromagnetic induction to produce light. Based on these principles, light is generated using gas discharged through magnetism. Rings with magnetic coils create an electromagnetic field

addition to the instant-on feature. “HID [high-intensity-discharge lamps] cannot provide the specifications required,” Sandowski added. “Furthermore, with induction’s 100,000-hour lifetime on their fixtures, it was an easy decision. We would’ve been lucky to get 20,000 hours out of any other fixtures. Once we took the warranty and the lower maintenance costs into consideration, we knew that we wanted to go with induction.”

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS

project LIGHTING using a high frequency generated by an electronic ballast. This field goes around a gas-filled glass tube. The discharge path induced by the coils forms a closed loop, accelerating free electrons that collide with mercury atoms and excite the electrons. As the electrons begin to reach a lower, more stable level, they give off energy in the form of invisible ultraviolet light, which converts to visible light when it passes through a phosphor coating on the surface of the tube. The lamp’s unique shape maximizes the fields generated during this process. The system blends technology that was first discovered more than 30 years ago with new features that were not commercially practical until now. Induction has overcome the barriers of high cost and technological setbacks such as electromagnetic interference, lumen depreciation, and inability to dim. ”The induction high-bay fixture has been sought out especially in large facilities where lower maintenance costs have been deciding factors as a result of the long life span of the fixture and the 10-year warranty,” said Jim Fink, who covers the state of Wisconsin for Alternative Sales and Marketing, Forest Lake, MN, and worked with Powrtek on the project. “Once we began evaluating the new construction, it was obvious that was the direction that we would go.”

“The success of the induction fixtures in the upper Midwest region has been phenomenal for reasons such as engineering support, providing lighting layouts, custom modifications when needed, product stock, and a U.S.manufactured product,” said Fink. “The key successes in this market are the operation of the induction lighting in exceptionally cold weather.” EverLast Lighting engineered its 200-W Huron aluminum high-bay unit to match the existing lighting temperature and protect the visual integrity of the historic stadium. Virtually maintenance-free for as long as 15 years, the fixtures are 50% to 70% more energy-efficient than metal halides. The fixtures provide a more natural, higher color-rendition light than traditional metal-halide fixtures. In addition, induction lighting fixtures are available with a bi-level dimming option triggered by photosensors, providing even more energy savings when areas are vacant. Building codes often require large sports stadiums to have lights on all day or all night, regardless of the lighting need. Bi-level fixture controls present an opportunity to save energy by dimming light levels in unoccupied areas. They also can turn off perimeter lights in areas that receive sufficient daylight to meet lighting needs.

Artificial sunshine In addition to the savings from bi-level controls, replacing existing light fixtures with high-performance fixtures, such as induction, can produce significant energy and lifecycle cost savings. Fixture replacements and bi-level controls can create peak demand reductions (kW) and hourly energy-use reductions (kWh). Typical energy savings for parking lots and garages retrofitted with bi-level lighting are 20% to 70%, depending on the previous and newly installed equipment. “Proprietary to the manufacturer, our bilevel option includes an advanced internal heatmanagement system designed for separation and airflow between the ballast and lamp. By isolating specific areas, the technology is able to ensure electronic components have a longer life cycle,” explained Justin Baldwin, EverLast vice president. “When developing the technology, we took into consideration fixture maintenance and ease of installation.” The result is a lamp with a life span roughly equivalent to 100 incandescent, five HID, five typical fluorescent, or two LED lamp changes. Because lighting technologies vary, the lighting specifiers considered visibility lumens for the Lambeau Field application. Metered footcandle readings—the intensity of illumination without regard for the contribution of the eye’s rods in color recognition and how the human eye works—only tell half the story. The more artificial light varies from natural sunlight, the less effective it is for visual acuity. Induction is the closest light to the natural, full-color spectrum of sunlight. Visually effective lumens (VEL) are the measure of lumens factored to account for visual acuity. VEL reflects a combination of the color-rendering index (CRI) of a light source as well as the Kelvin temperature (K). Induction lighting combines very high CRI with 5,000 K, and the natural, full-color spectrum of sunlight. The result is excellent acuity. However, management at Lambeau Field wanted to maintain the feel of their stadium, which is why they decided to pursue the custom 3,000 K blend, which emits a warm light that matches the history and character of the stadium. “Projects like Lambeau Field get us excited because we are lighting-solution providers, not just fixture manufacturers,” explained Brandon Marken, vice president of sales at EverLast. “When customers and/or our representatives come to us with a specific set of criteria and needs, we feel confident that we can deliver a customized solution that will exceed their expectations.”

Induction vs. LED Although LED technology has become a major force in the lighting industry, several factors drove Lambeau managers’ decision not to pursue LEDs as a stadium lighting solution: 32

For free information, circle 212

project LIGHTING •

Induction offers considerably lower luminaire incentives. Induction high bays also offer 68% Packer fans, players, and coaches will see each prices, and the fixtures’ lamp life is twice as long more delivered lumens than conventional game—and each Lambeau Leap—more clearly as LEDs. technologies and 50% less glare than LED high than ever. bays. • Induction luminaires can be easily re-lamped, unlike many LED fixtures. With traditional architecture and a history or free information, CIRCLE 18 of great football plays and players, venerable • Induction technology has much better lumen and visit our digital magazine at maintenance over the lifetime of the fixture. Lambeau Field will see its 55th season of football www.cbpmagazine.com/digital/julaug2013 • Induction prevents the harsh glare of directional this year. Thanks to the new induction lighting, and click on the icon. LED light sources because of its spherical light source and visually comfortable color rendering, typically ranging between 2,700 K to 6,000 K. White-light LEDs are in a higher range, emitting too much Best PVC Custom Prefabricated The Industry’s Best EXCEPTIONAL® Metals Duro-Guard® Membranes Insulation Flashings Warranties Edge Details blue light. & Accessories Federal, state, and local tax incentives are currently available to offset the cost of implementing energy-efficient lighting. “The federal tax incentive for installing induction lights is 60 cents/square foot,” explained Bryan Schultz, west coast regional sales manager for EverLast. “A number of utility companies are also offering incentives, such as credits and rebates, for energy-efficiency upgrades.” The 200-W Huron high bays installed in Lambeau Field present several options besides bi-level technology to increase fixture efficiency. The manufacturer offers a patented septum to maximize lamp geometry, which improves spacing ratios throughout the facility and increases the efficiency of the fixture. The septum also increases down light, minimizes trapped light, and decreases up light. Duro-Last® is your single-source for complete The Huron high bay offers a unique fixture lens and optional roofing systems, engineered to provide long-term white coating inside the fixture Edge-to-Edge & Deck-to-Sky™ protection. housing. The lens incorporated Installed by authorized contractors, and warranty issued by into each high bay, made with U.S. raw material, produces a lower the industry’s largest and best-trained quality assurance team. haze to allow more transparent light distribution. Although the standard spun-aluminum material increases reflectivity, the white coating also increases reflectivity and increases down light by more CONTACT DURO-LAST, INC. than 5%. FOR THE “WORLD’S BEST ROOF”® Induction high-bay fixtures boast the lowest total cost of ownership, compared with T8, www.duro-last.com / Twitter: @durolast LED, HPS, and HID lighting solutions. Many U.S. facilities Duro-Last, Duro-Guard, EXCEPTIONAL, and the “World’s Best Roof” are registered marks owned by Duro-Last Roofing, Inc. EXCEPTIONAL Metals is a division of Duro-Last Roofing, Inc. have begun to take advantage of the technology and its rebate

Edge-to-Edge & Deck-to-Sky™

800-248-0280

For free information, circle 213

project HVAC

uscatine, IA is home to a Beaux-Arts-style courthouse constructed in 1907 and listed on the National Register of Historic Places in 1981. According to county budget director Sherry Seright, there were growing signs that the building’s more than 30-year-old cooling and heating system needed to be replaced. “We found water in the basement from the old boilers, and the pipes were starting to leak. The indoor units were loud, moldy, and fuzzy, and everyone disliked the huge, ugly condenser unit sitting prominently on the roof of our handsome … building, spoiling the view,” she said.

The Beaux Arts-style courthouse in Muscatine, IA, uses a VRF/geothermal integrated HVAC system from Mitsubishi Electric Cooling & Heating.

Searching for green

Judged To Be Efficient Integrated VRF and geothermal systems save energy for an historical courthouse. 34

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Get free product information at www.cbpmagazine.com

The County Board of Supervisors wanted to learn more about going green and knew it was time to replace the courthouse’s failing, outdated HVAC system. A proposal from Vic Amoroso, a 40-year HVAC design engineer and president of A&J Associates PC, North Liberty, IA, caught their attention. Amoroso explained the basics of a closed-loop geothermal system and how smoothly it would work in tandem with a variable-refrigerant-flow (VRF) zoning system from Mitsubishi Electric Cooling & Heating, Suwanee, GA. Bruce Senti, an independent sales representative from Mitsubishi Electric, explained to Amoroso how the VRF zoning water-source system would interface with a geothermal field. “Our new W-series modular units perfectly combine the energy effectiveness of geothermal systems with the excellent efficiencies of our VRF zoning technology,” said Senti. “These new units are 30% smaller than previous models and can be easily transported down the stairs into the basement of the courthouse. By connecting to the geothermal loop, backup heat would not be needed as it might with air-source units.” The system, which uses water instead of air as a heat-exchange medium, is superior to air-cooled systems, especially in Iowa, where it is not uncommon for winter temperatures to dip below –10 F. The system’s dry mode is effective for the months of July and August, which can make Iowa feel like a greenhouse. Because of the hot, humid Iowa summers, Senti recommended another key VRF zoning product, a Mitsubishi Electric City Multi dedicated outdoor air system (DOAS). The DOAS would supply outdoor ventilation air to the courthouse, delivering the proper amount of fresh air to each room, and also provide ample dehumidification without excessive reheat. The DOAS would also increase the VRF zoning system’s energy efficiency because it pre-conditions outside air for introduction into the downstream HVAC units, reducing the load on the HVAC system. The fact that the DOAS and the VRF zoning system were designed to work together was appealing to Senti. “The DOAS from Mitsubishi Electric was very convenient for us,” he said.

project HVAC “Because the outdoor-air system and the VRF system were manufactured by the same company, we didn’t have to cobble together a system with components from different manufacturers that might decrease the system’s energy efficiency. Additionally, this system combination provided us with a one-stop shop regarding parts, warranties, installation, service, and repair.” Amoroso was interested in the VRF zoning system because its engineering design would overcome the installation challenges posed by the 105-year-old building with its 24-inch-thick limestone walls. The gas-fired boiler supplying heat to the courthouse would be eliminated, providing the county with significant natural-gas savings in the winter. But Amoroso also saw something even more significant—the VRF zoning system efficiencies, coupled with the heat-sync exchange of the campus geothermal field, could serve the courthouse and the new jail addition across the street. The geothermal campus was a hybrid, closed-loop system with 60 vertical and 40 horizontal wells. Amoroso’s presentation to the board convinced the members that this was the right decision.

Order in the court The transition to the new system was smooth, with not one courthouse office losing a day of work. Judges even held court during the transi-

DORMA ACCESS SOLUTIONS —

The courthouse is listed on the National Register of Historic Places and now boasts an updated HVAC system that saves energy and money.

tion. Mechanical contractor Heath Allard, president of Climate River Valley, Eldridge, IA, said, “This smooth installation had a lot to do with the native intelligence of the Mitsubishi Electric VRF zoning system design. Because it’s the industry’s only two-pipe system, there are far fewer fittings on the refrigerant lines, which saved us a lot of labor and equipment costs. Because the

W2-series units are installed indoors, we did not have to drill through the thick limestone walls, which would have made quite a racket.” “There are so many benefits to this new system it is hard to know where to begin,” Amoroso said. “First of all, there is the historic preservation accommodation of this technology, which is the least intrusive, less destructive factor

www.dorma.com

Enabling better buildings DORMA is a market leader of innovative and inspiring designs and technologies for access solutions. DORMA features a design oriented portfolio of architectural door hardware, specialty hardware for glass door and wall applications, door automation systems including Crane revolving doors, operable wall systems featuring Modernfold, and electronic access control systems with Rutherford Controls.

Opening & Closing

For free information, circle 214

Securing

Dividing

project HVAC

Prest® Pavers • Roof and Plaza Pavers • Prest® Brick • Permeable Pavers • Asphalt Block • Garden and Landscape Walls

Historic preservation was important for a new courthouse HVAC system. Mitsubishi Electric’s two-pipe system installation was non-intrusive.

of this two-pipe system. There is the super-quiet aspect of all the indoor units, ideal for an office environment: It’s so quiet, people often ask if it is operating. There is the system’s remarkable ‘dry mode’ setting, which has great impact on indoor comfort during our humid summers. Then, there is the unique 100% inverter-driven compressor that varies its speed to match the indoor cooling or heating demand. This is great engineering. When the system is operating at partial load, the energy efficiency is significantly higher than that of a standard fixed-speed system.” Inside the buildings, the VRF zoning-system heat pumps recover excess heat and reuse it to heat cold spots and to warm water. When the building temperatures are satisfied, the excess heat is then shared with the second building served by the campus geothermal loop. The second building’s heat-pump system uses the shared energy to maintain the temperatures in the jail addition. If both building temperatures are satisfied, then the excess heat is transferred to the loop field to be stored for later use. This use of a single energy unit provides overall campus energy savings. “We sized the geothermal loop field to handle 450 gallons/minute flow at the design heating and cooling load,” Amoroso continued. “The geothermal pumps are variable speed and

Equipment Installed

RF equipment from Mitsubishi Electric Cooling & Heating, Suwanee, GA,

installed at the Muscatine (IA) County Courthouse includes: One PURY R2-series outdoor unit Six PQRY WR2-series outdoor units Six PLFY ceiling-concealed indoor units Eight PKFY wall-mounted indoor units Fifty-seven PFFY fl oor-standing concealed indoor units One PEFY dedicated outside air system (DOAS) Fifty-eight PAC Simple MA remote controllers Eleven PAR MA remote controllers Seven CMB branch circuit (BC) controllers Two AG-150A centralized controllers.

adjust to what is needed in the overall campus balance. We have observed this past summer that the field can handle the campus system heattransfer requirement with just 20% of the design flow. The savings in pumping energy alone has been tremendous. This result is due in large part to the ability of the courthouse VRF zoning system to share and save heating and cooling energy for use in the other building and for storing for later use.”

Positive verdict “We are all thrilled with the performance of this technology partnership,” Seright said. “As budget director, I can tell you the clearest proof of the success of our decision came when the 30,000-sq.-ft. new jail addition came online and was tied into the campus geothermal field between both buildings. The energy bill did not move up one tick! That’s amazing proof of how this technology works.” “Perhaps best of all, we were able to remove that hideous chiller on the courthouse’s roof that spoiled its classic lines,” she continued. “The diminutive demands of this VRF zoning system have helped us bring back the grandeur of our courthouse.”

Historic South Capitol Park, Harrisburg, PA

Hanover® Asphalt Block

Produced with Recycled Content, Asphalt Block is a unique paving alternative helping to earn SS Credits and LEED points. Available in several shapes, sizes and colors, Hanover® Asphalt Block will enhance any project.

for free information, CIRCLE 16 www.hanoverpavers.com • 800.426.4242

For free information, circle 215

and visit our digital magazine at www.cbpmagazine.com/digital/julaug2013 and click on the icon.

project INTERIORS One of the most popular exhibits at the Nature Research Center is the Daily Planet, a threestory globe of the earth.

the existing museum with a two-level pedestrian bridge. The upper story features a progression of handmade tiles, created by artist Barbara Page, positioned along handrails to represent the passage of geologic time. In a nutshell, one can start at one end of the bridge and see tiles portraying life forms dating back 542 million years. By the time he or she gets to the other end of the bridge, the tiles impart images of living creatures that have evolved from back then until right now.

Teamwork pays off

Museum Creates Rock Stars With Tile, Granite Use of a Laticrete system contributes to the beauty and durability of an interactive research lab.

he North Carolina Museum of Natural Sciences’ new Nature Research Center wing, a state-of-the-art 80,000-sq.-ft. building with its cornerstone three-story globe of the earth, The Daily Planet, opened in late April 2012 in Raleigh. Its declared mission was to bring research scientists into the public eye, demystify what can be an intimidating field of study, and ultimately inspire educators and students toward a new generation of young scientists. According to the museum’s communications director, Jon Pishney, “Traditionally, museums show us more about what we know. Our new Nature Research Center gets visitors so involved they leave after learning via hands-on processes.” Designed to meet LEED Gold criteria, the new wing offers highly visible research laboratories where qualified scientists conduct research projects while visitors are right next to them, observing and learning. Additional investigative labs offer visitors a chance to perform their own small-scale experiments and try their hand at using tools of the trade. “This way, we’re able to get visitors more directly involved in the scientific process,” added Pishney. “It’s very possible at the Nature Research Center for a museum guest to use a high-powered microscope to look at plant or animal cells hundreds of times bigger than life.” The Nature Research Center is connected to

“These exterior hand-made tiles were installed in a stainless-steel pan,” said Jason W. Banks, LEED AP, project manager, BD+C at David Allen Co., an NTCA 5-star contractor and CTEF certified installer with headquarters in Raleigh, NC. “We knew from the start that working with the museum would involve a number of very unique tile projects. That’s why we trusted the Laticrete System for all installation materials. We used Latapoxy 300 adhesive for the handmade ‘time tiles’ due to its bonding strength. We caulked the entire perimeter and joints of these with Laticrete Latasil highperformance silicone sealant. Glass tile at the café was installed with Laticrete 254 Platinum. Before bathrooms were tiled, we protected all substrates by waterproofing them with Laticrete Hydro Ban. Each time, the outcome was perfect.” All products are from Laticrete International, Bethany, CT. The team from David Allen worked throughout specific areas within the new wing, primarily using Dallas-based Daltile products in the main bathrooms, kitchen, and café. Horizontal granite was specified for the main lobby entrance and as stair treads on the monumental floating staircase. “Great coordination work was done by the general contractor, Clancy & Theys Construction Co. of Raleigh, to get the main lobby and kitchen areas completed on time. The glass barrier around the edge of the floating stairs, for example, could not be put in place until the granite treads and landings were installed,” said Banks. “When it comes to the selection of products, our hands are tied here a bit, as the architect dictates what tile materials they intend and specify as a basis of design,” Banks said. “The architectural firm that designed the Nature Research Center, O’Brien/Atkins Associates PA [Durham, NC], did an outstanding job choosing products that were both beautiful and functional, while at the same time qualified for LEED points. “With my knowledge as a LEED AP BD&C, I understand the LEED scorecard and thus can properly fill out the paperwork for the GC. This helps streamline the process a bit for them. It also helps when looking to collect LEED points within the materials selected. While the specification may indicate only a regional requirement for the product, I can research the product and perhaps add to the recycling content LEED point.”

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS 39

project INTERIORS

▲

▲ A series of handmade tiles represent the passage of geologic time. Visitors can follow tiles portraying life forms dating back 542 million years.

Granite serves as the treads on the monumental floating staircase. Despite the visual weight of the stone, the glass barriers around them create the illusion that the slabs are floating.

Rock stars One area where Banks had some leeway was the choice of setting materials used. He explained that the LaticreteSystem was a great choice for this project due to optimal performance and the convenience of the company’s Hamlet, NC, location. “That allowed most of the installation products used to contribute to the regional-materials LEED certification.” Greene County granite and Virginia Mist granite were fabricated by North Carolina Granite Corp. in Mt. Airy, NC. Again, because the materials were shipped from their source location less than 500 miles from Raleigh, points were added to the project’s LEED scorecard. For the museum’s 24-hour grand opening, more than 1,000 people stood in line, waiting 45 minutes for a chance to go inside the threestory globe that had gradually taken shape over the past year. Many were interested in the center’s philosophy of getting visitors interactively involved with scientists. “We’re taking scientists out of their lab coats and isolated labs and putting them into the spotlight,” said Meg Lowman, director of the center. “They are the new rock stars.” The North Carolina Museum of Natural Sciences’ Nature Research Center has moved its tile-and-stone installation into a veritable spotlight position, as well. “Believe it or not,” Banks concluded, “there is a great deal of scientific know-how involved in these various tile projects. Maybe someday, a technical-services guru from Laticrete will be on hand in this building, offering cutting-edge information to a young, interested generation of potential tile-installation professionals about the correct ways to install tile and stone.”

for free information, CIRCLE 13 and visit our digital magazine at www.cbpmagazine.com/digital/julaug2013 and click on the icon. 40

For free information, circle 216

products INTERIORS

High-trafﬁc linear tiles

The company’s linear tiles for high-traffic entrances have a durable, polypropylene, needle-punch rib-pattern carpet insert for sand, dirt, and slush removal. The 1/2-inch-thick interlocking tile is made from recycled PVC with five carpet inserts/tile. Tiles snap together to install and replace and have a grid back that allows drainage and an area for dirt to accumulate under the tiles until it can be cleaned. Musson Rubber Co. Akron, OH Free information: Circle 50

Linear tiles: • For high-trafﬁc entrances • Interlocking • Made from recycled PVC

IAQ gypsum board

chair has a taller seat to make entry and exit easier. An upholstered aluminum J-bar between chair seats and backs allows the back to flex with a patient’s movement. Grand Rapids Chair Co. Grand Rapids, MI Free information: Circle 52

AirRenew Essential 1/2-inch gypsum board and 5/8inch Type X fire-resistant gypsum board are said to proactively capture VOCs, specifically formaldehyde and other aldehydes, and convert them into safe, inert compounds. Products are Greenguard Gold certified and contain as much as 99% total recycled content. CertainTeed Gypsum Tampa, FL Free information: Circle 51

Nadia healthcare seating line includes a patient chair and hip chair. The patient chair has an angled seat and sloped arms that aid a patient sitting and rising. A high back supports the head and shoulders. An optional ottoman stores under the chair. The hip

Retro-look furniture The Detroit furniture collection is influenced by 1950’s American diners, classic cars, and rock n’ roll. Hand-crafted details include cascading steel drawer pulls and a retro-fitted Hyedua wood veneer. Jonathan Charles Rocky Mount, NC Free information: Circle 54

PVC/VOC-free tile

Healthcare seating

EDITORS’ CHOICE

Stonescape PVC/VOC-free tile includes a 36-color palette in four graduated groups that offer tone-ontone harmony throughout the line. Custom colors are available. The product also contains no plasticizers, no phthalates, no chlorine, no halogen, no heavy metals, and no solvents. Stonescape colors work well with the company’s AB Pure rubber flooring. American Biltrite Sherbrooke, Quebec Free information: Circle 53

California-built panels Pacific Coastal collection panels use redwood repurposed from post-industrial manufacturing falloff and blue pine from beetle-felled tree stands throughout the western United States. Several sizes and styles are available. All panels are unfinished. Panels can contribute to LEED credits. Kirei Solana Beach, CA Free information: Circle 55

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS

products INTERIORS

modulararts.com I 206.788.4210 I now with 50 InterlockingRock ® designs I made in the USA

Fabric for healthcare

Lightweight, High Quality, Alpha-Gypsum Panels with steel-reinforced joints, precisely interlock for seamless surfaces of any size. No finicky track or z-clips. No formaldehyde! Smooth, rock-hard surface. Follows standard wall finish schedules. 10 YEARS, 50 DESIGNS, and over 250,000 PANELS WORLDWIDE! DESIGNED AND MANUFACTURED ENTIRELY IN THE USA.

For free information, circle 217

Classic Living II fabrics for senior-living and healthcare environments feature 63 upholsteries and three printed-drapery designs. The collection fuses multi-hued designs and textures with the color palettes of Mediterranean, Tuscan, Spa, Classic, and Bouquet. Each fabric has a working barrier such as Nano-tex, Durablock, or Crypton, and wide ranges of designs are bleach cleanable. Patterns include Extra Mile, Hexagon Links, Saddle Stitch, and Satin Paisley. Robert Allen Contract Foxboro, MA Free information: Circle 56

Lockers Duralife lockers made from HDPE are fully fire rated and NFPA 286 compliant for corridor applications. Reported to be impact, scratch, and dent resistant, the lockers have a high-security six-point latching mechanism. Their non-porous surface resists odors, mold, mildew, and graffiti. The lockers are said to never rust, corrode, or delaminate. A quiet-close feature reduces noise. Scranton Products Scranton, PA Free information: Circle 57 1307int16p

Stackable, colorful seating Poly line of multi-purpose stackable side seating combines practicality and design. The product’s uniform shape and size reportedly makes it easy to stack, move, and store. A breathable 100% polyester mesh back and seat are available in five colors including Big Sky, Black Tie, Crimson, Tangerine, and Kiwi. Available individually or in sets of four, the chairs can be stacked to 30 high on a transport dolly or 10 high on the floor. Kimball Ofﬁce Jasper, IN Free information: Circle 58

products INTERIORS

Healthcare broadloom Invision’s Artisan broadloom collection uses bold patterns and subtle textures to create a high-end aesthetic for a healthcare or senior-living setting. Based on designs found in hand-painted Spanish tiles, the line includes two patterns available in ten colors that include soft neutrals, cool and warm mid-tones, and deep saturated tones. Valencia is a modern version of a floral tile pattern; Barcelona uses a smaller repeat of the same pattern. The carpet uses 100% bleachresistant fiber and has the company’s ColorLoc Plus stain-resistant technology. J+J Flooring Group Dalton, GA Free information: Circle 59

Building transportation PORT personal occupant requirement terminal is an intuitive, two-way communication interface between elevator occupants and the environment. The app learns and adapts to the specific traffic patterns of each tenant. The device has a proximity sensor that operates in low-energy mode when not in use. An ambient light sensor determines the necessary brightness level for the illuminated screen. The system manages elevator trips to move passengers through a building in the most efficient manner. An ECO energy control option defines the average acceptable waiting time for a building. Schindler Elevator Corp. Morristown, NJ Free information: Circle 60

For free information, circle 218

Photography-influenced carpeting Moment flooring collection is influenced by the ‘art in memory’ concept with photography playing a key role. Each image was selected to reflect the energy, dramatic impact, and scale that occur naturally in large public spaces. Designs include Swept Away, On the Avenue, City Escape, and Saturday Morning. A wide range of varying gray tones keeps the focus on the movement within a design and allows the viewer to create their own visual journey. Available in broadloom and tile, the designs use colors and dimensions not typically seen in conventional carpet. Milliken Spartanburg, SC Free information: Circle 61

products INTERIORS

NEED A FAST FLOOR FACELIFT? Sheet flooring Takiron flooring line includes Pathways and MT sheet products. Pathways is a slip-resistant product for use in environments with hard-soled shoes as well as soft soles and bare feet. With a herringbone-like pattern, the flooring has a multidirectional wear layer. MT is also slip resistant and is available in whimsical primary and subtle earth-tone colors. The products can be used indoors and outdoors and can be heat or chemically welded for a seamless floor. CBC Flooring Commack, NY Free information: Circle 62

Transform floors fast

LEVEL-RIghT UNDERLAymENTS ®

with

Now there’s hope for floors marred by sags, wrinkles, dips or weather damage. Level-Right can transform even the most damaged floors into smooth, level floors — just 2 to 4 hours after pouring. Level-Right Self-Leveling Floor Underlayments have restored floors worldwide, and offer solutions for every floor challenge:

• Level entire floors or transition areas, featheredge to deepfill

• Provides a temporary wear surface in as little as 2 to 4 hours after application

• Resurface old or damaged concrete floors

• Accepts nearly all floor coverings

• Top old ceramic, marble or terrazzo floors

• Contains recycled materials

• New construction or renovation

• Up to 7200 PSI; water resistant • No troweling required • Encloses VCT, VAT or asbestos adhesive

Stainless-steel cable assemblies

High-performance flooring Tuf Stuf collection of high-performance flooring includes Fancy Free and Classic Cut lines. Each is available in a palette of 15 mix-and-match colors. The flooring has an overall gauge of 2.3 mm and can be used in combination with other 2.3-mm flooring collections, including Teknoflor. Flooring products feature a no-buff, no-wax finish and anti-bacterial properties. Shannon Specialty Floors Inc. Milwaukee Free information: Circle 63

CableRail railing systems include a wide selection of standard and custom stainless-steel cable assemblies. Made of 316-grade stainless steel with more than 70% recycled content, the cables and components offer low maintenance and a visually unobtrusive alternative to wooden or metal picket inﬁll. Systems have QuickConnect cable ﬁttings with automaticlocking jaws. Assemblies are available in pre-cut lengths from 5 to 70 feet. Feeney Inc. Oakland, CA Free information: Circle 64

THERE’S MORE ON OUR WEBSITE To learn more: 800-356-7887 info@maxxon.com • www.Maxxon.com © 2013 Maxxon® Corporation, all rights reserved. Level-Right is a registered trademark of Maxxon® Corporation, Hamel, MN.

For free information, circle 219

You can ﬁnd more Interiors products on our website. Go to www.cbpmagazine.com

products INTERIORS L I G H T I N G

Leather fabric Ultraleather Pro is a polyurethane fabric said to be unaffected by the most difficult stains. Available for a range of applications from corporate and educational to healthcare and hospitality, the durable surface is tested for abrasion resistance. The product is also antimicrobial and Greeguard certified. A wide range of colors is available. Ultrafabrics Westchester, NY Free information: Circle 65

Lambeau Field, Green Bay, WI

Resilient flooring Ruby collection flooring is a heterogeneous vinyl sheet flooring said to balance aesthetics, performance, and value. A polyurethane surface treatment and 28-mil wear layer provide wear resistance and low maintenance. Surface embossing provides slip resistance. The flooring is available in 20 colors, 10 rich wood, and 10 all-over patterns, and is Floorscore certified. Johnsonite Chagrin Falls, OH Free information: Circle 66

Dynamic-suspension seating Flavors Noodle chair has a suspension that responds to and tilts with a userâ&#x20AC;&#x2122;s motions in all directions. Applications include student classroom seating where the chair helps children expend excess energy to increase attention span. Available in three shell sizes and 17 colors, the chairs include a seat pan with waterfall front and back cutouts to aid in facing multiple directions. Smith System Plano, TX Free information: Circle 67

*Protected by U.S. Patent No. D659,897

Anything less is

IrresponsIble 2x the lifetime of LED High Bays, 50% lower glare. Delivers 68% more lumens than competitor induction. Lowest Total Cost of Ownership over T8, LED, HPS and HID.

The intersection of innovation and economy

Scan Me! Manufactured in U.S.A. Per Buy American Act 41U.S.C.

For free information, circle 220

products EXTERIORS

Roof waterproofing Kemperol roof-membrane systems adhere to substrates and are self-flashing and selfsealing for reported easy installation and edge-to-edge protection. The systems are reinforced with needle-punched 165 polyester fleece that absorbs resin and is said to achieve proper membrane thickness in a single topcoat. For green roofs, the monolithic, seamless, rot- and rootresistant systems provide long-term protection for landscape designs. For blue roofs, the product resists UV rays and is said to be unaffected by temperature cycling, standing water, and ice. Cool, white reflective finishes are available to reduce building energy demands. The company’s Kemperol 2K-PUR membrane system is odor free and can contribute to LEED credits. Kemper System America West Seneca, NY Free information: Circle 88

EDITORS’ CHOICE

Kemperol roof membrane: • Self-flashing and self-sealing • Reinforced with 165 polyester fleece • For green, blue, and white roofs

and customized information including information on the company’s insulation products, specifications, case studies and project profiles, and technical information. MyStuff allows users to create a customized virtual-information portfolio. Roxul Inc. Milton, Ontario Free information: Circle 90

stalls vertically and horizontally. Concealed fasteners and common lock joints work interchangeably, as well as with the company’s Concept Series panels. Panels can be stucco-embossed or smooth finish. Centria Moon Township, PA Free information: Circle 91

Product catalog The company’s architectural-products catalog describes its line of hatches; automatic fire vents; floor, vault, and sidewalk doors; and safety products. Details are included on the Lumivent automatic fire vent and a redesigned fall-protection grating. Lumivent provides security and the value of an automatic fire vent with the additional benefits of a skylight. The grating provides a permanent means of fall protection for its single- and double-leaf floor access doors and meets OSHA standard 29 CFR 1910.23. The Bilco Co. New Haven, CT Free information: Circle 89

Insulation spec tool RSPEC online tool provides information for specifying insulation for a range of projects. The tool is said to be an all-inclusive resource of facts, insights, videos, 46

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Heat-reflective wall coating Metal-panel system The Profile series Cascade metal-panel system is an interchangeable rainscreen panel that combines curves with a flat-slope rib profile. A 1 1/2-inch-deep rib combines a soft curve with an angular-sloped web, creating a play of light and shadow on the metal façade. Available in seven profiles, the product in-

Get free product information at www.cbpmagazine.com

StoCoat X-black is a heat-reflective exterior wall coating that reflects sunlight, resulting in a significantly lower surface temperature than occurs with the same color of exterior paint. The coating minimizes color fading and can be applied on most claddings including EIFS, stucco, concrete, wood, brick, or prepainted surfaces. It is available in 570 colors. Sto Corp. Atlanta Free information: Circle 92

products EXTERIORS Vinyl cedar shingles

Framing clamp system A 3-inch framing clamp system supports roof hatches, exhaust fans, and skylights. The system has a distributed load capacity of 1,000 pounds in upload and download conditions. Installed underneath and flush against the flute of an exiting corrugated roof deck, the system is said to eliminate the need for filling materials. Bolted connections eliminate the hazards and risks associated with traditional welding methods. No drilling or specialized tools are required. A system includes four Jaw clamps, four T-brackets, and four pieces of 3x2x1/8-inch tubing. Chicago Clamp Co. Broadview, IL Free information: Circle 93

Portsmouth shake and shingle line includes the V-Pro series vinyl shake. The line has ten color options, including two weathered colors. With a Class A fire rating, the shingles also have a grain pattern mimicking real cedar shingles. Royal Building Products Woodbridge, Ontario Free information: Circle 95

Asphalt anchors BoltHold asphalt anchors are said to withstand as much as 2,500 pounds of pull force. Anchor types include the 6-inch SP10 and SP12, the SP12M8 12 inch, and SP18 18-inch anchor. To install, a hole is drilled and filled with the companyâ&#x20AC;&#x2122;s EPX2 grout and the anchor inserted. After a setting time of about 15 minutes, the structure may be permanently bolted. Anchors permit the removal of structures or equipment mounted on them and are flush to the ground. Asphalt Anchors Group West Orange, NJ Free information: Circle 94 For free information, circle 221

products EXTERIORS

High-density cover boards The company’s high-density ISO cover boards provide a protective layer over board-stock insulation or as a re-cover over an existing roofing system. Two versions are available: HD with more than 80 psi and HD Plus with more than 110 psi compressive strength. EnergyGuard HD is a 1/2-inch-thick board with an R-value of 2.5. GAF Wayne, NJ Free information: Circle 96

Soffits Perimeter soffits provide a smooth, flat, non-perforated surface for improved airflow. Available in Triple 3 1/3-inch solid and hidden vent styles, the product comes in a wide range of 14 low-gloss colors. CertainTeed Corp. Valley Forge, PA Free information: Circle 97

ENERgy-Fit wITh NuRoof

Do you have an underperforming roof that needs an upgrade? Then you ® need MBCI’s NuRoof retrofit system that not only improves your roof’s performance, but also increases its aesthetic appeal. ®

Why NuRoof ?

Architectural copper Z-T products are coated on both sides with Z-T Alloy that is said to offer the advantages of copper or stainless steel with a naturally weathering earthtone gray. FreedomGray and Independence Gray/TCS II/TCS II Satin Z-T Alloy consist of three layers: zinctin alloy with satin finish, intermetallic layer, copper (99.5% pure) or 304-stainless steel. The coated products can be formed, installed, and subjected to sub-freezing temperatures. Applications include those that would use copper or lead-coated copper. Common underlayments can be used. Revere Copper Products Inc. Rome, NY Free information: Circle 98

• Improve building energy efficiencies • Increase property value • Enhance aesthetics with a new standing seam metal roof • Increase roof’s lifespan • Save on maintenance costs • Reduce landfill waste

Water-based adhesive

Visit www.mbci.com/cbfit to learn more! 877.713.6224 • info@mbci.com

facebook.com/mbci.metal

For free information, circle 222

@MBCImetal

HydroBond PVC water-based adhesive is an addition to the Sure-Flex line. The product is a high-strength, one-sided, wet lay-in dispersion adhesive for use with all Sure-Flex PVC and FleeceBack products. HydroBond bonds PVC membranes in a wet lay-in application to various porous and non-porous substrates on slopes to 2:12 and is said to work as a contact adhesive on higher slopes and vertical surfaces. It can be roller or spray applied. Carlisle SynTec Carlisle, PA Free information: Circle 99

products EXTERIORS a surface coat, providing a seamless barrier against the elements. Gray tint is available in Polybrite 70, PG 700, and Polybrite 24 coatings. Polyglass U.S.A. Inc. Deerfield Beach, FL Free information: Circle 102

Online LEED assistant

Waterproofing system

A LEED project-certification-assistant online tool automatically generates the necessary data for submittals for a LEED project. The tool produces a pdf file with details on the company’s products used in a project. Technical data sheets and a map showing the location of the upcoming project are also provided. Laticrete Supercap Bethany, CT Free information: Circle 100

Preprufe Plus waterproofing system is said to allow fast installation and provide strong adhesion at the seam. Applications include protecting below-grade areas of buildings from water and moisture entry, waterproofing under the concrete slab, and for building sites where over excavation around the perimeter or the below grade area is unwanted or not feasible, such as confined sites in cities. The membrane is said to be puncture and chemical resistant and not affected by moisture during installation. Grace Construction Products Cambridge, MA Free information: Circle 104

Stone cladding LedgeStone fiber-cement stone panel is part of the KuraStone line. The panels combine the classic elegance of stacked large stones, deep textures, and a rainscreen system that manages airflow and moisture. The product does not require a scratch coat, metal lath, or mortar. A hidden-clip system is used for installation. Nichiha USA Norcross, GA Free information: Circle 103

Special Purpose Custom

dooRS and wIndowS

Metal wall solutions The company’s brochure, Garland Metal Wall Panels and Accessories, includes schematics to illustrate how systems work and photos depicting a range of aesthetic options, including structural and architectural design solutions. A metal color-selector chart is also included. The Garland Co. Inc. Cleveland Free information: Circle 101

Gray roof coating The company’s elastomeric roof coatings are available with a gray-tint option. Used in a base coat, the tint provides a way to identify the base from the surface coat during installation. It can also be used as

STC 50 rated pairs of doors with wood molding

188 in. by 158 in. STC 55 rated door and frame assembly

For over 75 years, the world’s leading architects and security consultants have turned to Krieger Specialty Products to develop custom doors and windows that accentuate interior design while quietly operating as high performance sound barriers, security armor, thermal shields and more.

Request a free Idea Catalog at: www.KriegerProducts.com/CBP or give us a call 1-800-528-8141

For free information, circle 223

products HVAC & PLUMBING

Green restroom design

XChanger Combo Kit transforms waste-producing restrooms from paper-towel dispensers to Xlerator-equipped restrooms. Xlerator hand dryers are said to provide a hygienic environment with anti-microbial wall guards that protect surfaces from excess water. The retrofit kits provide transformation from paper towels without major renovation. The kit includes an adjustable panel for the space left behind by a former paper towel dispenser and is said to not cause damage to existing wall surfaces. An Xlerator hand dryer is then installed into a recess kit. An ADA-compliant version is available. Excel Dryer Inc. East Longmeadow, MA Free information: Circle 73

XChanger: • Kit changes from paper towels to Xlerator dryer

EDITORS’ CHOICE

• Uses available space • ADA-compliant version available

Applications include new construction and remediation projects. The product has a 5-year warranty. Carlisle HVAC Products Carlisle, PA Free information: Circle 75

10-ton unit Slide-bar grab system A slide-bar grab-bar system is said to provide increased shower safety. The system includes a chrome hand shower and an ADA-compliant stainless-steel grab bar. Mounted with the company’s SecureMount anchors, the system supports as much as 500 pounds and installs at any angle without a stud. Moen Commercial North Olmsted, OH Free information: Circle 74

Tate

Ductwork sealant

Jessup, M D

Hardcast Spray-Seal sprayable duct sealant is said to provide accurate control resulting in uniform duct-sealant coverage, less product waste, and minimized overspray. 50

COMMERCIAL BUILDING PRODUCTS

WeatherExpert 10-ton rooftop air conditioner provides an IEER of 20.8. Exceeding the parameters of the Department of Energy RTU Challenge, the WeatherExpert line includes models from 3 to 23 tons, reaching a high-IEER rating of 21.0 Carrier Syracuse, NY Free information: Circle 76

JUL/AUG 2013

877.9 9 9.8 28 3 w w w.tateinc.com For free information, circle 248

Get free product information at www.cbpmagazine.com

Touchless dispenser A brushed, stainless finish is available on the company’s enMotion automated, touchless soap and sanitizer dispensers. The dispensers have an adjustable portion-control setting of 0.4 and 0.7 ml. When paired with the line’s foam soap and sanitizer products, users experience fast response, no-touch dispensing to minimize cross-contamination. Georgia-Pacific Professional Atlanta Free information: Circle 77

products HVAC & PLUMBING Edge features a square design. Tiber takes the square layout and adds soft curves. Chelsea uses circular frames. Each collection includes a fixed shower head, various faucets models, pressure-balance valves, and tub spouts. Speakman Co. New Castle, DE Free information: Circle 82

Ventilation products Linear drains The company’s linear drains use architectural-grade stainless steel for channel drains and tile-tray inserts. Channel drains are ADA compliant. Drains can be placed anywhere in the shower for a range of design options. The products are said to fit all standard 2-inch floor drains. Standard channel-drain lengths are 30, 36, 48, and 60 inches. Luxe Linear Drains Atlanta Free information: Circle 78

A product brochure is available highlighting descriptions and specifications for the company’s range of ventilation equipment. Information is included on the AireShare room-to-room and level-to-level transfer fans, Dryer Duct booster fan for long dryerduct runs, Duct Booster fans for extended duct runs and supply/exhaust applications, UnderAire crawl-space fans, and Xchanger reversible basement-ventilation fans. Tjernlund Products Inc. White Bear Lake, MN Free information: Circle 80

Toilet partitions

Wall-hung boilers P-K Mach boiler line includes models CM300 (300 MBTU/hour), CM399 (399 MBTU/hour), and CM500 (500 MBTU/hour). The units have a 40% smaller footprint when compared with previous models and are available as floor-standing or wall-hung products. The boilers are CSA certified at 90%-plus efficiency and low NOx. Top and front panels remove to allow easy access to key components. Harsco Industrial Patterson-Kelley East Stroudsburg, PA Free information: Circle 79

Using the same materials and processes as the company’s SL-17 FRP doors, a line of toilet partitions is available for restrooms expected to endure heavy use and willful abuse, along with corrosive environments. Applications include schools, stadiums, parks, rest areas, and retail facilities, along with locker rooms, pools, and showers. Special-Lite Inc. Decatur, MI Free information: Circle 81

Shower/bath collections The company’s line of luxury bathroom fixtures includes The Edge, Chelsea, and Tiber. For free information, circle 224

products HVAC & PLUMBING respectively, versus conventional chilled-water loop or rooftop forced-air HVAC systems. Five universal 6-inch-diameter duct knockouts, with spin-fit collars in the top or any of the four sides and universal water-piping connection locations, allow beams to snap into two mounting brackets. A 12-slot airflow nozzle is field adjustable. The integral flow-pattern control can be angled to 45 degrees. The beams can be installed in a ceiling grid or as a pendant. Semco Columbia, MO Free information: Circle 85

ERV system DryCool products for building dehumidification are said to provide 100% makeup air at space-neutral temperature and below-space humidity. Based on a condenser-reactivated desiccant wheel, the evaporator coil provides cooling prior to the desiccant process. Energy recovery devices such as heat recovery wheels and heat pipes can be incorporated. Units range from 200 to 16,000 cfm and may contribute to LEED credits. Munters Selma, TX Free information: Circle 84

Filter curbs

Vertical hand dryer VMax hand-in vertical hand dryer is said to provide a 25% wider drying opening than other vertical dryers. Reported dry time is 10 to 12 seconds. The unit has a HEPA filter system with an odor-neutralizing tablet for a fresh restroom environment. No hard-wiring is required. The dryer meets ADA standards and is said to operate quietly. World Dryer Corp. Berkeley, IL Free information: Circle 83

The company’s filter curbs for rooftop equipment are manufactured to specifications and most are shipped fully assembled. Laser technology provides tight tolerances. The curbs feature all-welded construction, factory-insulated walls, filter rack, and access door. Options include a built-in roof pitch, extra height for installation of sound traps beneath the unit, and a pressure-treated wood nailer. Thybar Corp. Addison, IL Free information: Circle 86

Chilled beams IQHC series chilled beams are said to provide a 25% and 50% reduction in pump and fan horsepower,

ON THE PROJECT, ON THE SHELF, ON THE JOB

Miniaturization through Technology ™

Introducing the New Lux-Ray LED ® Emergency Lighting from Emergi-Lite Smaller battery: compact unit, reduced environmental impact Designed with the environment in mind, the Lux-Ray ™ uses high-performance, low power consumption LEDs that run on a smaller Lead-free or Cadmium-free battery. Higher performance: fewer units required The patent-pending Lux-Ray ™ light engine uses LEDs that generate a wide beam, enabling 50- to 70-foot spacing of units in path-of-egress illumination.

RUGGED . VERSATILE . SOPHISTICATED For more information about this product, visit:

For free information, circle 225

www.emergi-lite.com/LuxRay

Contemporary faucet Ono series includes a bathroom faucet with clean lines. Available in two, single-lever models, each has a fixed spout rising at a 16-degree angle from the perpendicular pillar. The series includes a freestanding tub filler and bathtub spout, overhead showers, and complementary accessories. KWC America Norcross, GA Free information: Circle 87

products LIGHTING & ELECTRICAL

Sleek LED lighting system

EDITORS’ CHOICE

Lumenline is a sleek, slender, indoor general lighting system designed to have minimal presence to blend into any architectural space. Clean, uninterrupted lines of LED light illuminate areas including offices, classrooms, retail, or institutional environments. With a 2 1/2-inch profile, the luminaire is said to provide a 25% energy savings over T5 HO fluorescent systems. Available in 1- to 8-foot lengths, as well as continuous runs, the fixture is available in pendant, surface-mount, and recessed formats and can be configured with various colors and color temperatures. Lumenpulse Lighting Inc. Quebec Free information: Circle 68

Lumenline: • Sleek, slender LED units • Available in 1- to 8-foot lengths • Pendant, surface-mount, and recessed formats

5-sided pendant

Field-custom LED track head TLM-R16 LED track head has adjustable light levels and beam angles that can be changed on demand by the end user. The unit is said to seamlessly integrate with existing track-lighting fi xtures with 35- or 50-W halogen equivalence. The fi xture uses LEDSense thermal protection to ensure colored and specialized beam-spread lenses can be used without the unit overheating. Dynamic Transformer Recognition is built in to create compatibility with existing low-voltage transformers and phase dimmers for smooth and flickerfree dimming. Three replaceable lenses and four userselectable light-output levels are adjusted with a push button on the unit’s side. Beam shapes include spot beam, narrow flood, flood, and wide flood. It is available with 430 or 640 lumens in four color temperatures. TerraLux Inc. Longmont, CO Free information: Circle 69

Quintetta is a 5-sided, linear, LED pendant that sets the mood for applications including hotel/corporate lobbies, reception areas, and conference rooms. Providing 5 W/foot, the fixture’s lit ends and sides glow with clean, white color. An ultra-thin, low-voltage suspension cable provides power. Amerlux Fairfield, NJ Free information: Circle 70

LED task/table light Pensum LED task/table light is part of the Twivell series, using a dual-swivel concept. The luminaire has a low-scale design with a tubular light head that rotates 350 degrees. The vertical light arm swivels 160 degrees in a left/right arc. The adjustments use fingertip friction control to stay where set, until readjusted. Nessen Lighting Mamaroneck, NY Free information: Circle 71

LED retrofit lamps LEDioc lamps provide field retrofit from an HID to LED light source in post-top and pendant luminaires. The 37-W lamps include a driver and surge protector and can be used in 120- to 277-V systems. The 5,000-K model provides 44,000 initial lumens, 70 CRI, and 106 lumens/W. EYE Lighting International Mentor, OH Free information: Circle 72

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS

products BUILDING TECHNOLOGY

Building-management solutions EDITORS’ CHOICE

The company’s 3-Series Control System and Fusion enterprise-management software combines control of AV, room scheduling, BMS, voice and data, HVAC, security, lighting, and energy management. The 3-Series integrates the technologies and systems on the same platform to work together as a single system. The software communicates with the control system and provides a dashboard to monitor, manage, and control the technology in all rooms and in all buildings across a campus or global enterprise. Detailed usage data are collected and reported. The system provides a complete picture of what is happening throughout, not just bits and pieces. Applications include detecting high-energy usage time, finding anomalies and power spikes, identifying areas that created the fastest ROI, and receiving instant notifications. Crestron Electronics Inc. Rockleigh, NJ Free information: Circle 105

3-Series Control System: • Integrates building systems on one platform • Fusion software provides dashboard • Detailed usage data collected and reported provides sharp scene alignment. The series is available in four models and is suitable for a variety of indoor environments. Schneider Electric Palatine, IL Free information: Circle 107

web-based HOBO U30 data-logging systems. The software provides scheduled automatic delivery of exported data files, in CSV or XLSX format, by email or FTP. Data can now be configured in a highly customized manner. Onset Bourne, MA Free information: Circle 109

Button, latching timer A universal button with UL-listed latching timer can be used as is or reconfigured for a specific application. The button can be used in a latching mode that can be reset with a contact closure. The single-gang button has two sets of Form C contacts. The faceplate is cast aluminum and is slightly oversized to cover old plate-installation marks. Other versions available include pneumatic, touch free, or a 2-inch button that is ADA compliant. Safety Technology International Inc. Waterford, MI Free information: Circle 106

Video surveillance Pelco IP video-surveillance products include the Sarix IL10 series mini-box and micro-dome cameras. The cameras are said to produce high-quality, color HDTV video. An integrated fixed-focal-length lens 54

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Building automation AspectFT v2.0 building-automation and energy-control solution integrates building control with technology such as Twitter, RSS, email, Google Calendar, Microsoft Outlook, and Apple iCAL. Incorporating HTML5, the system allows users to access and alter information from web devices with no additional plug-ins. American Auto-Matrix Export, PA Free information: Circle 108

Web-based monitoring An enhanced version of the company’s HOBOlink web-enabled software platform provides 24/7 data access and remote management for the company’s

Get free product information at www.cbpmagazine.com

Indoor, vandal-resistant cameras The M50-V PTZ dome network cameras for indoor surveillance are lightweight and said to be easy to install. The IP66- and IK10-rated units are resistant to water, dust, and vandalism. The network cable is protected in the ceiling mount to enhance tamper protection. Models provide automatic alerts for motion detection, camera tampering, or when someone enters a restricted area. Axis Communications Chelmsford, MA Free information: Circle 110

products WINDOWS & DOORS EDITORS’ CHOICE

Flood protection

tions. Fabrics include Ion high-performance fabric that provides energy efficiency and glare control, regardless of color; Polar, that has the same properties as Ion but in a PVC-free blend; Sure Block, a basket weave that maximizes view clarity and is available in rolls to 122 inches wide; and Habitat, a PVC-free, lead-free, bacterial- and fungal-resistant, Greenguard-certified, 100%-recyclable fabric. InPro Corp. Muskego, WI Free information: Circle 114

The company’s flood barrier for entries uses a permanently fixed aluminum frame and removable PVC panels. The product meets Miami Dade 1886 and 1996 missile and cyclical testing to 60 psf. Closed-cell silicon gaskets seal the frame to a building. Stainless-steel compression latches seal the lightweight, tongue-and-groove PVC panels to the frame to create a reportedly watertight seal against floodwaters. Applications include entry doors, overhead doors, ventilation openings, and low-level windows. FloodArk USA Plainview, NY Free information: Circle 112

Clean-environment door

Blast series Energsave G-500 blast aluminum window series has a U value of 0.15. The series meets Department of Defense UFC 4-01001 specifications. The window is anchored inward to allow the product to flex, absorbing energy and preventing transfer to the wall for increased structural integrity. The unit is also anchored at only the head and sill. The series uses aluminum bars placed within the thermal break to serve as an isolation piece to slow heat flow, while low-e foil is used on each side of the thermal break to reflect heat back. The design allows different exterior and interior finishes. Peerless Architectural Windows and Doors Ft. Scott, KS Free information: Circle 111

Tiger FRP pharmaceutical-duty door series serves interior medical environments where cleanliness is pre-eminent. The series is seamless and manufactured with non-organic materials. The smooth, non-porous surface is said to be easy to keep clean. The door core consists of a 4-mm cell polypropylene honeycomb surrounded by a rigid tubular FRP subframe. Outer composite skins are fused to the door faces and edges, forming a bond that integrates all components. Overly Door Co. Greenburg, PA Free information: Circle 113

Unitized wall system YUW 750 XTH unitized wall system is an addition to the company’s ProTek line. The system is said to be the most innovative hurricane impact-resistant system available. It delivers impact resistance while exceeding stringent energy codes. The system can be configured for multi-span curtain-wall applications, single-span ribbon walls, and combinations that transition between the two. It can be specified for a fully captured appearance with visible exterior face covers, in four-sided structural silicone glazed for an all-glass exterior, or a combination. Its thermal-barrier design is said to provide U factors as low as 0.30. YKK AP America Inc. Austell, GA Free information: Circle 115

Energsave G-500: • Blast aluminum window series • U value of 0.15 • Anchored to allow flex

Sun-control louvers Solar shades Solarity solar shades use a solar-screen fabric to control sunlight and heat without blocking window views. Ten fabrics accommodate a variety of applica-

The company’s operable sun-control louvers provide control of sunlight and solar heat gain. Reversing the louvers in colder months brings sunlight into a space. Savannah Trims Inc. Lake Park, FL Free information: Circle 116

Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS

products WINDOWS & DOORS events. Said to be compatible with screened windows, options include a retractable louvered screen for solar control and natural ventilation or a traditional shade with slats for solar control, privacy, and improved U value. The system is integrated into a window, not an add on. Marvin Windows and Doors Warroad, MN Free information: Circle 119

Low-e coating

Fire-rated door sweep

Thermal window OptiQ ultra thermal-window line includes the AA 5450 series window. Available in single and doublehung configurations, including a matching fixed option, the windows are said to deliver superior thermal performance while offering a range of aesthetic choices for new and retrofit construction. A polyamide thermal break allows the windows to achieve higher thermal performance than tradition thermal breaks and the windows accommodate a 1-inch double-pane or 1 1/2-inch triple-pane insulating glass. The aluminum units have a 4 5/8-inch frame depth and a dual-color option. Kawneer Co., Traco division Norcross, GA Free information: Circle 117

The company’s sill-protection sweep with Intumescent and neoprene insert is ITS approved for 20-minute fire-rated wood or metal doors with excessive undercut to 1 1/4 inches. A 90-minute UL-approved sweep is available for metal doors. Applications include doors cut too short or with alignment problems that result in lost fire ratings. Zero International Bronx, NY Free information: Circle 118

Automated exterior shades An automated exterior-shading system is fully programmable and uses infrared and radio-frequency technology. Shades can be programmed with timed

Vue-30 coating is said to provide superior visible light transmittance relative to the solar heat gain performance. When the coating is applied to a 1/4-inch clear substrate, the performance reportedly provides a solar-heat-gain coefficient of 0.18 and a visible light transmittance of 31%. The result is a light-to-solargain ratio of 1.72. The coating also balances natural light provision and solar performance while reducing potential internal and external glare. Its levels of interior (20%) and exterior (19%) reflectivity are low given the light-to-solar-gain ratio. The coating is available on any of the company’s glass substrates and can also be combined with silk-screen patterns or digital printing. Viracon Inc. Owatonna, MN Free information: Circle 120

advertising SHOWCASE W

hen a Touch of

legance Matters

Bespoke Cabinetry, Furniture, Light Fixtures, Art Glass Candle Sleeves, Sculptures & more

Commercial or residential, indoor or outdoor, our unique products offer advanced sound absorption and barrier solutions.

Call 813-980-1400 or visit www.acoustiblok.info Powerful LED Performance. Up to 85% Savings. Lumark Crosstour MAXX LED meets high lumen output requirements. TM

The LED wall pack and site luminaires deliver up to 7,416 lumens replacing up to a 400 watt metal halide fixture, while consuming only 85 watts and providing up to 85% in energy and maintenance savings.

to learn more about Acoustiblok and our specialized noise reducing products: • QuietFiber® • Acoustiblok® • Acoustifence® • Quiet-Cloud® • Acoustiblok Wallcover ® • All Weather Sound Panels® • Thermablok® Aerogel Insulation Featured Product: Screw-in LED Bulbs Flicker, Steady, Dual-Mode & Dimmable

View Our Installation Video At:

acoustiblok.com/acoustiblok-video.php

www.cooperlighting.com.

415-255-6703 www.AnneThullFineArtDesigns.com

G REENBUILD B OOTH 1313S

G REENBUILD B OOTH 3875N

G REENBUILD BOOTH #599

G REENBUILD B OOTH 3868N

Free information: Circle 230

Free information: Circle 231

Free information: Circle 232

Free information: Circle 233

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Get free product information at www.cbpmagazine.com

advertising SHOWCASE ClimateMaster® Tranquility® 22 High Efficiency Series

This unique, industry-changing product incorporates high-end features: two-stage compressor, EnergyStar™ tier 3 efficiency, variable speed fan, communicating digital controls and true “plug-and-play” functionality at a very competitive price point. It also has one of the industry’s smallest footprint, making it suitable for installation in tight places.

climatemaster.com

OuR PaRTiTiOnS Hang TOugH in a CRuEL WORLD. Engineered to be as durable as our legendary FRP doors, new Special-Lite® Toilet Partitions put an end to constant repairs and costly replacements with partitions designed to hang tough in the most difficult applications.

800.821.6531

special-lite.com/tough

Greenbuild booth 1032

AIA booth 2003

Greenbuild Booth 4565N

Free information: Circle 234

Free information: Circle 235

Free information: Circle 236

TOLL FR E E 866.443. F LE X (3539)

Design Flexibility with Security

TEXAS A&M UNIVERSITY LIBERAL ARTS & HUMANITIES BUILDING

CURVED FRAMING MADE

EASIER

FLE

X-C

TRA

Hammer-Lock Feature makes using Flex-C Trac, Flex-C Angle, and Flex-C Arch easier and

FREE DUPONT TYVEK FLUID APPLIED WB SYSTEM DELIVERS SUPERIOR PROTECTION, OFFERS ENHANCED DURABILITY & SAVES TIME. ™

It’s what you can expect from: The Curved Wall People™

• Proven Track Record 800+ projects 3 million+ square feet • Time Saving Tools

BIM models, Spec Writer

Read the case study: www.fluidapplied.tyvek.com/casestudies

Tel.866.443.3539

REQUEST YOUR FREE GUIDE

SEE ALL OUR LEADING CURVABLE FRAMING PRODUCTS AT:

liveroof.com/designguide Code #CBP13R (800) 875-1392

Copyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont and Tyvek are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. Photo courtesy of BRW Architects. ™

faster than ever.

GREEN ROOF DESIGN GUIDE

www.flexabilityconcepts.com

Greenbuild booth #939

AIA booth 3414

AIA booth 1020

Greenbuild booth 644

Free information: Circle 237

Free information: Circle 238

Free information: Circle 239

Free information: Circle 240

www.cbpmagazine.com Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS

advertising SHOWCASE ZERO’S WORLD-FAMOUS AUTOMATIC DOOR BOTTOMS ONLY CLEAVER-BROOKS HAS THIS TECHNOLOGY IN A 12,000 MBTU HYDRONIC CONDENSING BOILER. Large Capacity, Small Footprint

The new ClearFire-LC hydronic condensing boiler can provide up to 12,000 MBTU in a single boiler.

Sizes To Fit Your Needs With six different large MBTU/HR capacity sizes available up to 12,000 MBTU, there’s a 4,000 MBTU/HR CFLC that’s right for you.

12,000

+ Patented Technology To build the industry’s best heat exchanger, we combined our patented AluFer tubes with our proprietary spiral tubes achieving 99% efficiency, 5:1 turndown and ultra-low emissions.

ClearFire®–LC Learn more at cleaverbrooks.com or call 1.800.250.5883.

Patented technology activates to drop the seal with a scissors-like motion when the door closes, and retract when opened. A smooth drop, without drag for a tight seal against the saddle or floor. Many models to choose from: for sound ratings, fire-ratings, lead lining, surfaced mounted, semi or full mortised, both regular or heavy duty models - All USA made. For complete information, our 76-page catalog, printed or on-line. ZERO INTERNATIONAL 718-585-3230 zerointernational.com

Greenbuild booth 1032

Greenbuild booth 833

AIA booth 552

Free information: Circle 241

Free information: Circle 242

Free information: Circle 243

The New Look

of Commercial Chamfer Bead

BREATHE NEW LIFE INTO BUILDINGS

WITH A FAST FLOOR FACELIFT

Turn your roof tops into beautiful, useful decks With Level-Right Self-Leveling Underlayments floors marred by sags, wrinkles, dips or weather damage can be transformed into smooth, level floors – just two to four hours after pouring!

Enhance the interior architectural details of any space with Chamfer Bead. The newly designed line of Chamfer Beads now features sharper & cleaner lines.

• Top old ceramic, marble or terrazzo floors • Up to 7200 PSI; water resistant • Encloses VCT, VAT or asbestos adhesive • Accepts virtually all floor coverings • GREENGUARD Gold Certified

800-356-7887 • www.Maxxon.com

www.trim-tex.com

• Transforms flat roofs into attractive, maintenancefree, landscaped paver stone terraces. • Elevates paver stones for perfect drainage. • Levels paver stones and ensures their uniform spacing for an ideal roof terrace surface. • Ideal for laying paver walkways in roof gardens.

ENVIROSPEC INCORPORATED

716-689-8548 • www.envirospecinc.com

AIA booth 514

Greenbuild booth 644

Greenbuild booth #939

Greenbuild Booth 1437S

Free information: Circle 244

Free information: Circle 245

Free information: Circle 246

Free information: Circle 247

www.cbpmagazine.com 58

The PAVE-EL® Pedestal System

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Get free product information at www.cbpmagazine.com

supplier INDEX

Commercial

BUILDING PRODUCTS

page number

circle number

Acoustiblok ................................................. 56 .................... 231

SERVING ARCHITECTS, CONTRACTORS, AND OWNERS IN COMMERCIAL CONSTRUCTION

Amerlux ....................................................... 17 .................... 207

Gary L. Parr

Anne Thull Fine Art Designs .................... 56 .................... 233

E xecu t i ve V ice Pr esiden t , C onSour ce L L C 847.382.8100 ex t .101 gpar r @ cbpmaga zine.com

Aquatherm Pipe ......................................... 30 .................... 211 Carlisle HVAC Products ............................ 40 .................... 216

Jack Curley

Carlisle SynTec .......................................... 4 ...................... 202

Regional Sales Manager Nor t heas t 201.569.5481 201.805.9529 cell jcur ley @ cbpmaga zine.com

Scott Cunningham

Regional Sales Manager Sou t heas t , Mid-Sou t h, OH, IN 770.913.0115 678.576.1487 cell s cunningham @ cbpmaga zine.com

CertainTeed Roofing .................................. 13 .................... 205 Cleaver-Brooks .......................................... 58 .................... 241 ClimateMaster Inc. .................................... 57 .................... 234

COMING

in future issues

Cooper Lighting .......................................... 56 .................... 230 CPI Daylighting .......................................... 58 .................... 243 DORMA ....................................................... 37 .................... 214 DuPont Fluid Applied ................................. BC, 57 ............. 227, 237 Duro-Last Roofing Inc. .............................. 33 .................... 213

Jon Heng Patricia Heng

Everlast Lighting ........................................ 45 .................... 220 Envirospec Inc. .......................................... 58 .................... 246

Regional Sales Manager s Wes t C oas t , MN, MO 626.799.3610 jheng @ cbpmaga zine.com pheng @ cbpmaga zine.com

EYE Lighting ............................................... 23 .................... 209 Flex-Ability Concepts ................................ 57 .................... 240 Forbo ........................................................... IFC .................. 200

Tracy Ryle

Inside S ales, Regional S ales IL , MI, W I 847.382.8100 ex t . 103 t r y le @ cbpmaga zine.com

Marga Parr

Pr oduc t ion Manager 847.382.8100 ex t . 115 mpar r @ cbpmaga zine.com

Greenbuild .................................................. 29 .................... 210

SEPTEMBER Healthcare/Senior Care

Kawneer Co. Inc. ....................................... 7 ...................... 203

Flooring

Krieger Specialty Products ...................... 49 .................... 223

Lighting

LG Electronics ............................................ 2 ...................... 201

OCTOBER

Ellen Sandkam

L is t Ren t al Ser v ices 847.382.8100 ex t . 110 esandk am @ a t plis t s.com

Hanover Architectural Products ............. 38 .................... 215

Green Construction Roofing Wall Products

Jill Kaletha

LiveRoof ...................................................... 57 .................... 239 Major Industries ........................................ 57 .................... 236 Mars Air Systems ...................................... 19 .................... 208 Maxxon Corp. ............................................. 44, 58 .............. 219, 245 MBCI ............................................................ 48 .................... 222 Metallic Building Co. ................................. 43 .................... 218

F os t er Repr in t Ser v ice 866.879.914 4 ex t . 168 jillk @ f os t er pr in t ing.com

Modulararts ................................................ 42 .................... 217 Musson Rubber .......................................... 58 .................... 247 Norton Door Controls ................................ 11 .................... 204

Arthur L. Rice

Samsung Techwin America ...................... IBC.................. 226

C hair man / C E O 847.382.8100 ex t . 106 ar ice @ a t pne t wor k .com

Scranton Products .................................... 47 .................... 221 Solatube International .............................. 15 .................... 206 Special-Lite Inc. ......................................... 57 .................... 235 Thomas & Betts ......................................... 52 .................... 225 SE RECYCL EA E L P

Thybar Corp. ............................................... 32 .................... 212 Tjernlund Products Inc. ............................ 56, 57 .............. 232, 238 Trim-Tex....................................................... 58 .................... 244

Commercial Building Products ConSource LLC 1300 S. Gr ove Avenue, Sui t e 105, Bar r ing t on, IL 60010 847.382.8100 w w w.cbpmaga z ine.com

United Cool Air ........................................... 51 .................... 224 Zero International Inc. .............................. 58 .................... 242 Get free product information at www.cbpmagazine.com

JUL/AUG 2013

COMMERCIAL BUILDING PRODUCTS 59

portfolio T

he Wawona Sculpture at the Museum of History and

Industry in Seattle is a 56-foottall kinetic sculpture created from computer-cut, handcarved timber planks salvaged from the Wawona, an 1897 schooner used to transport lumber. Suspended vertically from the buildingâ&#x20AC;&#x2122;s roof and reaching down to 12 inches from the floor, the sculpture responds to pushes from visitors by swinging slightly. Artist: John Grade, Seattle. Structural engineering: Arup, Seattle. Project manager, Hans-Erik Blomgren. Inset: The sculptureâ&#x20AC;&#x2122;s exterior resembles the old-growth trees that supplied the lumber for the original ship.

COMMERCIAL BUILDING PRODUCTS

JUL/AUG 2013

Get free product information at www.cbpmagazine.com

Total IP Security Products Samsung provides customers with a comprehensive line of IP security products that include network cameras, NVRs, monitors, license-free viewing and recording software, mobile viewing solutions, layer 2 switches, controllers encoders and much more. To see the full line of Samsung Security products visit samsung-security.com.

877-213-2333 www.samsung-security.com For free information, circle 226

TEXAS A&M UNIVERSITY LIBERAL ARTS & HUMANITIES BUILDING COLLEGE STATION, TX

APPROVED & APPLIED FOR TEXAS A&M. Only the most effective air and water barrier could pass the test to be used on the new Liberal Arts & Humanities Building at Texas A&M. The DuPont™ Tyvek® Fluid Applied System scored high for performance and ease of application to earn high marks from the installers, builders and architects. Learn more at: www.fluidapplied.tyvek.com/casestudies Copyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont and Tyvek are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. Photo courtesy of BRW Architects. ™

For free information, circle 227

commARCH - July August 2013

Articles inside

Granite

IP Cameras Fly High In Space Museum

Judged To Be Efficient

Induction Lamps Light Lambeau

PEX Pipe Big Factor In Hotel Renovation

Blast Mitigation Demands Careful Attention

Touch-Free Fixtures Tap Into Hygiene