Glasurit Spray Painters

GLASURIT 90 LINE

GLASURIT 90 LINE

WHAT WILL THE CHANGE MEAN TO YOU?

HOW GLASURIT CAN HELP? BODYSHOP SPRAY PAINTERS

90 LINE - MAKING THE CHANGE Current Seminars

Ratio Custom 55/90 Line

Glasurit offers a large range of training courses aimed at

Ratio Custom will educate the delegates on all aspects of the

increasing Bodyshop productivity, cost-saving techniques

car refinishing process utilising the Glasurit product range.

and technology.

The course is broken into 2 segments.

1. Efficient Painting - theoretical & hands on, all KPI

These courses cater for all levels of spray painting

efficiencies are measured.

experience, from beginner to the more experienced

2. Rapid Repair - as outlined below.

spray painter.

Ratio Rapid Repair Details of Glasurit courses are outlined below, for more

The Rapid Repair seminar is targeted to maximise through

information, please contact our Technical Customer Service

put in the paint shop by identifying the most efficient repair

team on (02) 8787 0100 or visit our website;

method for small damage repairs.

www.glasurit.com.au Ratio-Basic Skills

Non Aggressive Basecoat

The Paint Shop

The very low solvent content of Glasurit 90 Line, means

The storage of waterborne basecoat due to the

that painting of solvent sensitive substrates is no longer

water content will change, as standard paint tins

an issue.

will simply rust. The 90 Line basecoat will now need

Colour Education 1

This program gives Bodyshop personnel a broad knowledge

The objective of this course is to enable the delegates

of about Glasurit products and their proper use in the

to understand the basic principles of color theory and

Bodyshop. It is recommended for employees with limited

economically manage the preparation of colour.

amounts of painting experience, or no Glasurit product experience.

to be stored in plastic containers or lacquer-lined tins.

Colour Education 2 Glasurit educates delegates with a more advanced

Ratio-OEM – (Porsche, Lexus, BMW & Mercedes-Benz)

Glasurit 90 Line has a higher solid content than

Solvent and water don’t mix

training which is designed to give a deeper insight into

A 2 day seminar which has been designed to meet the high

conventional solvent basecoat. This means less

The mixing of these two products will cause

colors and color physics especially with respect to process

expectations of prestige vehicle manufacturers and owners.

basecoat is required.

contamination during the mixing and refinishing

Higher Solid Content

process, therefore it’s important that you keep all

Ratio Spot Repair is an advanced course which focuses on

solvent and waterborne products and tools separate within the paint mixing room.

This expert seminar provides an overview of the optimum

small damage repair identification and teaches attendees

workflow arrangements in a paint shop, from reception to

how to utilise the most efficient repair processes and

with over 70% of car manufacturers using waterborne

Best Practices

delivery of the vehicle.

products for maximum throughput and profitability.

technology, the use of Glasurit 90 Line will make your

A clean paint shop and regular booth maintenance

job easier when it comes to reproducing the finish on

goes without saying, however it is even more important

late model vehicles.

now with the use of waterborne basecoat. As water

Cleaning of Equipment

shop can potentially lead to dust inclusions in the

Glasuirt 90 Line cleans up with water, reducing the

basecoat. By keeping your paint shop clean you will also

need for gunwash. Decreasing your exposure to

reduce the amount of time spent denibbing clearcoat.

solvents means less chance of contracting potential health ailments such as dermatitis and respiratory associated disorders.

A5 Brochure 28.5.2010.indd 1

THE REFINISHING PROCESS

Ratio-Spot Repair Process Optimisation

The way in which effect pigments lay down with

evaporates slower than solvent, an untidy/dirty paint

WHAT WILL THE CHANGE MEAN TO YOU?

improvements.

Better Colour Reproduction waterborne technology differs from solvent-borne. So

GLASURIT 90 LINE

Ratio Aqua This course is designed for delegates who want a full understanding of waterborne basecoats systems.

BASF Australia Ltd. 231-233, Newton Road, Wetherill Park, NSW 2164, Australia.

Email: contact-australia@basf.com Phone: 02 8787 0100 Fax: 02 8787 0133

Glasurit® is a brand of BASF Australia Ltd, a company in the BASF-Group. www.glasurit.com.au

27/07/10 3:39 PM

GLASURIT 90 LINE

GLASURIT 90 LINE

WHAT WILL THE CHANGE MEAN TO YOU?

HOW GLASURIT CAN HELP? BODYSHOP SPRAY PAINTERS

90 LINE - MAKING THE CHANGE Current Seminars

Ratio Custom 55/90 Line

Glasurit offers a large range of training courses aimed at

Ratio Custom will educate the delegates on all aspects of the

increasing Bodyshop productivity, cost-saving techniques

car refinishing process utilising the Glasurit product range.

and technology.

The course is broken into 2 segments.

1. Efficient Painting - theoretical & hands on, all KPI

These courses cater for all levels of spray painting

efficiencies are measured.

experience, from beginner to the more experienced

2. Rapid Repair - as outlined below.

spray painter.

Ratio Rapid Repair Details of Glasurit courses are outlined below, for more

The Rapid Repair seminar is targeted to maximise through

information, please contact our Technical Customer Service

put in the paint shop by identifying the most efficient repair

team on (02) 8787 0100 or visit our website;

method for small damage repairs.

www.glasurit.com.au Ratio-Basic Skills

Non Aggressive Basecoat

The Paint Shop

The very low solvent content of Glasurit 90 Line, means

The storage of waterborne basecoat due to the

that painting of solvent sensitive substrates is no longer

water content will change, as standard paint tins

an issue.

will simply rust. The 90 Line basecoat will now need

Colour Education 1

This program gives Bodyshop personnel a broad knowledge

The objective of this course is to enable the delegates

of about Glasurit products and their proper use in the

to understand the basic principles of color theory and

Bodyshop. It is recommended for employees with limited

economically manage the preparation of colour.

amounts of painting experience, or no Glasurit product experience.

to be stored in plastic containers or lacquer-lined tins.

Colour Education 2 Glasurit educates delegates with a more advanced

Ratio-OEM – (Porsche, Lexus, BMW & Mercedes-Benz)

Glasurit 90 Line has a higher solid content than

Solvent and water don’t mix

training which is designed to give a deeper insight into

A 2 day seminar which has been designed to meet the high

conventional solvent basecoat. This means less

The mixing of these two products will cause

colors and color physics especially with respect to process

expectations of prestige vehicle manufacturers and owners.

basecoat is required.

contamination during the mixing and refinishing

Higher Solid Content

process, therefore it’s important that you keep all

Ratio Spot Repair is an advanced course which focuses on

solvent and waterborne products and tools separate within the paint mixing room.

This expert seminar provides an overview of the optimum

small damage repair identification and teaches attendees

workflow arrangements in a paint shop, from reception to

how to utilise the most efficient repair processes and

with over 70% of car manufacturers using waterborne

Best Practices

delivery of the vehicle.

products for maximum throughput and profitability.

technology, the use of Glasurit 90 Line will make your

A clean paint shop and regular booth maintenance

job easier when it comes to reproducing the finish on

goes without saying, however it is even more important

late model vehicles.

now with the use of waterborne basecoat. As water

Cleaning of Equipment

shop can potentially lead to dust inclusions in the

Glasuirt 90 Line cleans up with water, reducing the

basecoat. By keeping your paint shop clean you will also

need for gunwash. Decreasing your exposure to

reduce the amount of time spent denibbing clearcoat.

solvents means less chance of contracting potential health ailments such as dermatitis and respiratory associated disorders.

A5 Brochure 28.5.2010.indd 1

THE REFINISHING PROCESS

Ratio-Spot Repair Process Optimisation

The way in which effect pigments lay down with

evaporates slower than solvent, an untidy/dirty paint

WHAT WILL THE CHANGE MEAN TO YOU?

improvements.

Better Colour Reproduction waterborne technology differs from solvent-borne. So

GLASURIT 90 LINE

Ratio Aqua This course is designed for delegates who want a full understanding of waterborne basecoats systems.

BASF Australia Ltd. 231-233, Newton Road, Wetherill Park, NSW 2164, Australia.

Email: contact-australia@basf.com Phone: 02 8787 0100 Fax: 02 8787 0133

Glasurit® is a brand of BASF Australia Ltd, a company in the BASF-Group. www.glasurit.com.au

27/07/10 3:39 PM

GLASURIT 90 LINE

GLASURIT 90 LINE

THE ENVIRONMENT AND OUR INDUSTRY. In recognition of the significant adverse human health issues as a result of ozone and particulate matter, many governments worldwide have now committed to meet environmental and pollution standard ambient target levels.

Europe and America have already implemented VOC

is quite substantial. The use of conventional repair

legislation. Our neighbours in the Asia Pacific region

products will produce approx. 1070g of VOC based

have committed to lowering VOC limits, it’s just a

pollutants on a repair size of 1m².

matter of time before Australia follows suit.

By converting to Glasurit 90 Line Waterborne VOC Legislation

Technology and using low VOC products, a single

The Australian government are now contracting

Bodyshop will reduce their VOC emissions by 33%.

consultants to investigate and give recommendations on legislation requirements. This is being done on both State and Federal level. It’s now not a question if, but when legislation will come into effect.

What is VOC? Many of the products used in the automotive refinish industry contain Volatile Organic Compounds (VOC’s), including refinishing paint products, cleaners, spray

Industrial 27%

Architectural & Decorative 42%

REGULATION 17% Automotive (100% Refinishing)

Heavy Duty 14%

corrosion protection materials and adhesives. The VOC content of a refinishing product is basically the solvent content in the product or the solvent which is added.

When these solvents are released into the atmosphere

10,167,024 litres of refinish paint sold.

Equates to 6,358 tonnes of VOC product 20,089 tonnes of potential ozone formation VOC emission.

TOTAL VOCS FROM SURFACE COATINGS SOLD IN AUSTRALIA, EXCLUDING ‘SOURCE CONTROLLABLE COATINGS’ (2007).

they combine with nitrogen oxides to form ground level ozone air pollution such as smog. VOC’s are not only harmful to our environment, but contribute to eye and

What is the difference between waterborne and solvent–borne basecoat?

skin irritations and adverse respiratory health effects

Waterborne coating material is suspended in the water

such as asthma, bronchitis and on occasions even death.

carrier(polymer), instead of having the coating material

How can the refinish industry help?

dissolved in solvents. After the coating is applied, the water evaporates, leaving the coating material.

BODYSHOP SPRAY PAINTERS THAT HAVE MADE THE TRANSITION.

“ Glasurit’s strong point is their training programme. They held our hand and helped us through the whole process.

That’s what makes them stand out from their competitors. All my staff were trained up to use 90 Line and with great results.”

GARY WAITE Colin Waite Auckland, NZ

“ I went to the training myself and it was an excellent overview of how to best use the products.”

GLASURIT 90 LINE

THE REFINISHING PROCESS.

Preparation and Pre-cleaning

As the tinters are now highly consentrated the

The preparation process of the repair remains the same.

accuracy of formulation mixing is even more crucial

However pre-cleaning of contaminants is now a two

for colour reproduction, as the smallest over pour

step process. This is necessary as contaminants found

of tinting base will alter the colour. This also applies

on the surface of substrates are both solvent and water

to tinting.

soluble. Remember “Solvent & Waterbase don’t mix”.

Step 1. clean with Glasurit 541-5 Wax & Grease remover to remove solvent based contaminant.

Step 2. clean with Glasurit 700-1 water based cleaner to remove water based contaminants.

Primer/Primer Fillers During the transition from solvent-borne to waterborne, 285-550 Primer Filler Black / 285-650 Primer Filler White & W.O.W primers 285-49 Black

BRENT BUCKMASTER Mt Roskill Panel and Paint Auckland, NZ

“ Very, very good training from Glasurit… (they have) spent a lot of time down at the workshop to train our guys and supervise them so they are fully trained, to eliminate any problems that we may have had.”

JOHN TORRISI Prestige Paint and Panel Sydney

/ 285-38 White will be introduced. This combination of primers enables the painter to mix and use the recommended grey shades found in Profit Manager formulations. The use of grey shade primers eliminates the need for excessive basecoat application reducing the risk of water entrapment which is associated with incorrect flash off times before clearcoating. The use of an etch primer is always recommended for all bare metal surfaces including small rub throughs. Non priming of rub through areas prior to topcoating with waterborne basecoat will cause discolouration. If you think about it logically, water + bare steel = RUST.

By lowering the amount of solvent used within the

Comparing waterborne basecoat with similar solvent-

industry, we are helping to ensure a brighter future

borne products, the waterborne product can have

for generations to come. Although there are only

anywhere from 55% to 90% less solvent.

approximately 4,200 Bodyshops Australia wide,

The majority of Glasurit tinting bases are 500ml tins.

Glasurit 90 Line Waterborne Technology

the refinish industries contribution to VOC emission

This is due to the higher solid content and the need

has 90% less solvent.

for less product.

A5 Brochure 28.5.2010.indd 2

Mixing and Tinting of Colour

The mixing of formulation will now be more regimented and all instructions must be followed. The use of 90 Line M4 Binder is the first step in formula mixing, this is followed by the addition of tinting bases. The binder and bases are mixed at a ratio 70:30. You must now mix these two components thoroughly prior to reducing.

The Glasurit Colour Profi System can also be used in conjunction with Glasurit 90 Line.

Reducing of Colour The 90 Line E3 viscosity adjuster can now be added at a mixing ratio of 2:1. This also requires immediate stirring. Profit Manager will prompt you during the formulation mixing process.

Application of 90 Line Glasurit 90 Line is applied by conventional application method, HVLP spray guns are recommended. Hand held Venturi blowers will be introduced to assist in the drying of the waterborne basecoat.

Application of Clearcoat All Glasurit Clearcoats are compatible with 90 Line.

Once the waterborne basecoat has had sufficient time to flash off, clearcoat application is as per standard Glasurit application process.

27/07/10 3:39 PM

GLASURIT 90 LINE

GLASURIT 90 LINE

THE ENVIRONMENT AND OUR INDUSTRY. In recognition of the significant adverse human health issues as a result of ozone and particulate matter, many governments worldwide have now committed to meet environmental and pollution standard ambient target levels.

Europe and America have already implemented VOC

is quite substantial. The use of conventional repair

legislation. Our neighbours in the Asia Pacific region

products will produce approx. 1070g of VOC based

have committed to lowering VOC limits, it’s just a

pollutants on a repair size of 1m².

matter of time before Australia follows suit.

By converting to Glasurit 90 Line Waterborne VOC Legislation

Technology and using low VOC products, a single

The Australian government are now contracting

Bodyshop will reduce their VOC emissions by 33%.

consultants to investigate and give recommendations on legislation requirements. This is being done on both State and Federal level. It’s now not a question if, but when legislation will come into effect.

What is VOC? Many of the products used in the automotive refinish industry contain Volatile Organic Compounds (VOC’s), including refinishing paint products, cleaners, spray

Industrial 27%

Architectural & Decorative 42%

REGULATION 17% Automotive (100% Refinishing)

Heavy Duty 14%

corrosion protection materials and adhesives. The VOC content of a refinishing product is basically the solvent content in the product or the solvent which is added.

When these solvents are released into the atmosphere

10,167,024 litres of refinish paint sold.

Equates to 6,358 tonnes of VOC product 20,089 tonnes of potential ozone formation VOC emission.

TOTAL VOCS FROM SURFACE COATINGS SOLD IN AUSTRALIA, EXCLUDING ‘SOURCE CONTROLLABLE COATINGS’ (2007).

they combine with nitrogen oxides to form ground level ozone air pollution such as smog. VOC’s are not only harmful to our environment, but contribute to eye and

What is the difference between waterborne and solvent–borne basecoat?

skin irritations and adverse respiratory health effects

Waterborne coating material is suspended in the water

such as asthma, bronchitis and on occasions even death.

carrier(polymer), instead of having the coating material

How can the refinish industry help?

dissolved in solvents. After the coating is applied, the water evaporates, leaving the coating material.

BODYSHOP SPRAY PAINTERS THAT HAVE MADE THE TRANSITION.

“ Glasurit’s strong point is their training programme. They held our hand and helped us through the whole process.

That’s what makes them stand out from their competitors. All my staff were trained up to use 90 Line and with great results.”

GARY WAITE Colin Waite Auckland, NZ

“ I went to the training myself and it was an excellent overview of how to best use the products.”

GLASURIT 90 LINE

THE REFINISHING PROCESS.

Preparation and Pre-cleaning

As the tinters are now highly consentrated the

The preparation process of the repair remains the same.

accuracy of formulation mixing is even more crucial

However pre-cleaning of contaminants is now a two

for colour reproduction, as the smallest over pour

step process. This is necessary as contaminants found

of tinting base will alter the colour. This also applies

on the surface of substrates are both solvent and water

to tinting.

soluble. Remember “Solvent & Waterbase don’t mix”.

Step 1. clean with Glasurit 541-5 Wax & Grease remover to remove solvent based contaminant.

Step 2. clean with Glasurit 700-1 water based cleaner to remove water based contaminants.

Primer/Primer Fillers During the transition from solvent-borne to waterborne, 285-550 Primer Filler Black / 285-650 Primer Filler White & W.O.W primers 285-49 Black

BRENT BUCKMASTER Mt Roskill Panel and Paint Auckland, NZ

“ Very, very good training from Glasurit… (they have) spent a lot of time down at the workshop to train our guys and supervise them so they are fully trained, to eliminate any problems that we may have had.”

JOHN TORRISI Prestige Paint and Panel Sydney

/ 285-38 White will be introduced. This combination of primers enables the painter to mix and use the recommended grey shades found in Profit Manager formulations. The use of grey shade primers eliminates the need for excessive basecoat application reducing the risk of water entrapment which is associated with incorrect flash off times before clearcoating. The use of an etch primer is always recommended for all bare metal surfaces including small rub throughs. Non priming of rub through areas prior to topcoating with waterborne basecoat will cause discolouration. If you think about it logically, water + bare steel = RUST.

By lowering the amount of solvent used within the

Comparing waterborne basecoat with similar solvent-

industry, we are helping to ensure a brighter future

borne products, the waterborne product can have

for generations to come. Although there are only

anywhere from 55% to 90% less solvent.

approximately 4,200 Bodyshops Australia wide,

The majority of Glasurit tinting bases are 500ml tins.

Glasurit 90 Line Waterborne Technology

the refinish industries contribution to VOC emission

This is due to the higher solid content and the need

has 90% less solvent.

for less product.

A5 Brochure 28.5.2010.indd 2

Mixing and Tinting of Colour

The mixing of formulation will now be more regimented and all instructions must be followed. The use of 90 Line M4 Binder is the first step in formula mixing, this is followed by the addition of tinting bases. The binder and bases are mixed at a ratio 70:30. You must now mix these two components thoroughly prior to reducing.

The Glasurit Colour Profi System can also be used in conjunction with Glasurit 90 Line.

Reducing of Colour The 90 Line E3 viscosity adjuster can now be added at a mixing ratio of 2:1. This also requires immediate stirring. Profit Manager will prompt you during the formulation mixing process.

Application of 90 Line Glasurit 90 Line is applied by conventional application method, HVLP spray guns are recommended. Hand held Venturi blowers will be introduced to assist in the drying of the waterborne basecoat.

Application of Clearcoat All Glasurit Clearcoats are compatible with 90 Line.

Once the waterborne basecoat has had sufficient time to flash off, clearcoat application is as per standard Glasurit application process.

27/07/10 3:39 PM

GLASURIT 90 LINE

GLASURIT 90 LINE

THE ENVIRONMENT AND OUR INDUSTRY. In recognition of the significant adverse human health issues as a result of ozone and particulate matter, many governments worldwide have now committed to meet environmental and pollution standard ambient target levels.

Europe and America have already implemented VOC

is quite substantial. The use of conventional repair

legislation. Our neighbours in the Asia Pacific region

products will produce approx. 1070g of VOC based

have committed to lowering VOC limits, it’s just a

pollutants on a repair size of 1m².

matter of time before Australia follows suit.

By converting to Glasurit 90 Line Waterborne VOC Legislation

Technology and using low VOC products, a single

The Australian government are now contracting

Bodyshop will reduce their VOC emissions by 33%.

consultants to investigate and give recommendations on legislation requirements. This is being done on both State and Federal level. It’s now not a question if, but when legislation will come into effect.

What is VOC? Many of the products used in the automotive refinish industry contain Volatile Organic Compounds (VOC’s), including refinishing paint products, cleaners, spray

Industrial 27%

Architectural & Decorative 42%

REGULATION 17% Automotive (100% Refinishing)

Heavy Duty 14%

corrosion protection materials and adhesives. The VOC content of a refinishing product is basically the solvent content in the product or the solvent which is added.

When these solvents are released into the atmosphere

10,167,024 litres of refinish paint sold.

Equates to 6,358 tonnes of VOC product 20,089 tonnes of potential ozone formation VOC emission.

TOTAL VOCS FROM SURFACE COATINGS SOLD IN AUSTRALIA, EXCLUDING ‘SOURCE CONTROLLABLE COATINGS’ (2007).

they combine with nitrogen oxides to form ground level ozone air pollution such as smog. VOC’s are not only harmful to our environment, but contribute to eye and

What is the difference between waterborne and solvent–borne basecoat?

skin irritations and adverse respiratory health effects

Waterborne coating material is suspended in the water

such as asthma, bronchitis and on occasions even death.

carrier(polymer), instead of having the coating material

How can the refinish industry help?

dissolved in solvents. After the coating is applied, the water evaporates, leaving the coating material.

BODYSHOP SPRAY PAINTERS THAT HAVE MADE THE TRANSITION.

“ Glasurit’s strong point is their training programme. They held our hand and helped us through the whole process.

That’s what makes them stand out from their competitors. All my staff were trained up to use 90 Line and with great results.”

GARY WAITE Colin Waite Auckland, NZ

“ I went to the training myself and it was an excellent overview of how to best use the products.”

GLASURIT 90 LINE

THE REFINISHING PROCESS.

Preparation and Pre-cleaning

As the tinters are now highly consentrated the

The preparation process of the repair remains the same.

accuracy of formulation mixing is even more crucial

However pre-cleaning of contaminants is now a two

for colour reproduction, as the smallest over pour

step process. This is necessary as contaminants found

of tinting base will alter the colour. This also applies

on the surface of substrates are both solvent and water

to tinting.

soluble. Remember “Solvent & Waterbase don’t mix”.

Step 1. clean with Glasurit 541-5 Wax & Grease remover to remove solvent based contaminant.

Step 2. clean with Glasurit 700-1 water based cleaner to remove water based contaminants.

Primer/Primer Fillers During the transition from solvent-borne to waterborne, 285-550 Primer Filler Black / 285-650 Primer Filler White & W.O.W primers 285-49 Black

BRENT BUCKMASTER Mt Roskill Panel and Paint Auckland, NZ

“ Very, very good training from Glasurit… (they have) spent a lot of time down at the workshop to train our guys and supervise them so they are fully trained, to eliminate any problems that we may have had.”

JOHN TORRISI Prestige Paint and Panel Sydney

/ 285-38 White will be introduced. This combination of primers enables the painter to mix and use the recommended grey shades found in Profit Manager formulations. The use of grey shade primers eliminates the need for excessive basecoat application reducing the risk of water entrapment which is associated with incorrect flash off times before clearcoating. The use of an etch primer is always recommended for all bare metal surfaces including small rub throughs. Non priming of rub through areas prior to topcoating with waterborne basecoat will cause discolouration. If you think about it logically, water + bare steel = RUST.

By lowering the amount of solvent used within the

Comparing waterborne basecoat with similar solvent-

industry, we are helping to ensure a brighter future

borne products, the waterborne product can have

for generations to come. Although there are only

anywhere from 55% to 90% less solvent.

approximately 4,200 Bodyshops Australia wide,

The majority of Glasurit tinting bases are 500ml tins.

Glasurit 90 Line Waterborne Technology

the refinish industries contribution to VOC emission

This is due to the higher solid content and the need

has 90% less solvent.

for less product.

A5 Brochure 28.5.2010.indd 2

Mixing and Tinting of Colour

The mixing of formulation will now be more regimented and all instructions must be followed. The use of 90 Line M4 Binder is the first step in formula mixing, this is followed by the addition of tinting bases. The binder and bases are mixed at a ratio 70:30. You must now mix these two components thoroughly prior to reducing.

The Glasurit Colour Profi System can also be used in conjunction with Glasurit 90 Line.

Reducing of Colour The 90 Line E3 viscosity adjuster can now be added at a mixing ratio of 2:1. This also requires immediate stirring. Profit Manager will prompt you during the formulation mixing process.

Application of 90 Line Glasurit 90 Line is applied by conventional application method, HVLP spray guns are recommended. Hand held Venturi blowers will be introduced to assist in the drying of the waterborne basecoat.

Application of Clearcoat All Glasurit Clearcoats are compatible with 90 Line.

Once the waterborne basecoat has had sufficient time to flash off, clearcoat application is as per standard Glasurit application process.

27/07/10 3:39 PM

GLASURIT 90 LINE

GLASURIT 90 LINE

WHAT WILL THE CHANGE MEAN TO YOU?

HOW GLASURIT CAN HELP? BODYSHOP SPRAY PAINTERS

90 LINE - MAKING THE CHANGE Current Seminars

Ratio Custom 55/90 Line

Glasurit offers a large range of training courses aimed at

Ratio Custom will educate the delegates on all aspects of the

increasing Bodyshop productivity, cost-saving techniques

car refinishing process utilising the Glasurit product range.

and technology.

The course is broken into 2 segments.

1. Efficient Painting - theoretical & hands on, all KPI

These courses cater for all levels of spray painting

efficiencies are measured.

experience, from beginner to the more experienced

2. Rapid Repair - as outlined below.

spray painter.

Ratio Rapid Repair Details of Glasurit courses are outlined below, for more

The Rapid Repair seminar is targeted to maximise through

information, please contact our Technical Customer Service

put in the paint shop by identifying the most efficient repair

team on (02) 8787 0100 or visit our website;

method for small damage repairs.

www.glasurit.com.au Ratio-Basic Skills

Non Aggressive Basecoat

The Paint Shop

The very low solvent content of Glasurit 90 Line, means

The storage of waterborne basecoat due to the

that painting of solvent sensitive substrates is no longer

water content will change, as standard paint tins

an issue.

will simply rust. The 90 Line basecoat will now need

Colour Education 1

This program gives Bodyshop personnel a broad knowledge

The objective of this course is to enable the delegates

of about Glasurit products and their proper use in the

to understand the basic principles of color theory and

Bodyshop. It is recommended for employees with limited

economically manage the preparation of colour.

amounts of painting experience, or no Glasurit product experience.

to be stored in plastic containers or lacquer-lined tins.

Colour Education 2 Glasurit educates delegates with a more advanced

Ratio-OEM – (Porsche, Lexus, BMW & Mercedes-Benz)

Glasurit 90 Line has a higher solid content than

Solvent and water don’t mix

training which is designed to give a deeper insight into

A 2 day seminar which has been designed to meet the high

conventional solvent basecoat. This means less

The mixing of these two products will cause

colors and color physics especially with respect to process

expectations of prestige vehicle manufacturers and owners.

basecoat is required.

contamination during the mixing and refinishing

Higher Solid Content

process, therefore it’s important that you keep all

Ratio Spot Repair is an advanced course which focuses on

solvent and waterborne products and tools separate within the paint mixing room.

This expert seminar provides an overview of the optimum

small damage repair identification and teaches attendees

workflow arrangements in a paint shop, from reception to

how to utilise the most efficient repair processes and

with over 70% of car manufacturers using waterborne

Best Practices

delivery of the vehicle.

products for maximum throughput and profitability.

technology, the use of Glasurit 90 Line will make your

A clean paint shop and regular booth maintenance

job easier when it comes to reproducing the finish on

goes without saying, however it is even more important

late model vehicles.

now with the use of waterborne basecoat. As water

Cleaning of Equipment

shop can potentially lead to dust inclusions in the

Glasuirt 90 Line cleans up with water, reducing the

basecoat. By keeping your paint shop clean you will also

need for gunwash. Decreasing your exposure to

reduce the amount of time spent denibbing clearcoat.

solvents means less chance of contracting potential health ailments such as dermatitis and respiratory associated disorders.

A5 Brochure 28.5.2010.indd 1

THE REFINISHING PROCESS

Ratio-Spot Repair Process Optimisation

The way in which effect pigments lay down with

evaporates slower than solvent, an untidy/dirty paint

WHAT WILL THE CHANGE MEAN TO YOU?

improvements.

Better Colour Reproduction waterborne technology differs from solvent-borne. So

GLASURIT 90 LINE

Ratio Aqua This course is designed for delegates who want a full understanding of waterborne basecoats systems.

BASF Australia Ltd. 231-233, Newton Road, Wetherill Park, NSW 2164, Australia.

Email: contact-australia@basf.com Phone: 02 8787 0100 Fax: 02 8787 0133

Glasurit® is a brand of BASF Australia Ltd, a company in the BASF-Group. www.glasurit.com.au

27/07/10 3:39 PM