All igubal self-aligning maintenance-free plain bearings by Inese Janauska

3. igubal. 速

... Self-aligning rod ends-, pillow block- and flange bearings

...

...plastics

igubal速

Application Examples: igubal速

Exciting applications can be viewed online at

LIMELIGHT BV Stadium paneling igubal速 spherical bearings of dimension series K are used in the main bearing assembly of every individual slat owing to their freedom from maintenance, corrosion resistance and

www.igus.co.uk/igubal-applications

atmospheric resistance. Since these slats can be swiveled, this allows the air flow inside the stadium to be regulated. Part number: igubal速 spherical bearing KGLM-08

RESEARCH INSTITUTE Mirror adjustment of the telescope is performed virtually free of backlash with igubal® flange bearings. Magnetic influences can be avoided. (Max-Planck Institut for physics and astrophysics)

SPECIAL-PURPOSE VEHICLE Insensitive to dirt and maintenance-free: The rugged clevises and spherical bearings never give in on the special-purpose municipal vehicles. (Multicar Spezialfahrzeuge GmbH)

PACKAGING MACHINE Long service life and, at the same time, food-safe design have been implemented in this application with igubal® rod ends. (Leeb GmbH)

CARAVAN STEP Rugged, insensitive to dirt and vibration-dampening igubal® rod ends withstand the loads even in worstcase conditions. (Hymner AG)

TEXTILE INDUSTRY Concentricity errors and jolts are compensated by means of spherical clevises in the support of the thread guide unit more efficiently than the alternative metal product. (Sahm GmbH & Co. KG)

CHOCOLATE DECORATION SYSTEM Decoration without grease by using maintenancefree igubal® rod ends turn all the sweets into sheer enjoyment. (Wolf Spezialmaschinen GmbH)

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 565

igubal速

igubal速 Selection | Materials Overview

KBRM/KBLM

Series K female thread right/left; metric (metal insert optional)

Rod Ends

page 576

KBRM CL KBLM CL

Series K female thread right/left; metric (metal insert optional)

page 578

KCRM/ KCLM

Series K female thread right/left; metric (metal insert optional)

page 581

KARM/KALM

Series K male thread right/left; metric (metal insert optional)

page 580

from page 571

KBRI/KBLI

Series K female thread right/left; Inches

page 590

Clevis Joints from page 602

GERM/GELM Series E metric

page 606

Pillow Block Bearings from page 619

KSTM

Series K metric

page 624

Flange Bearings from page 631

EFOM Series E metric

page 636

KARI/KALI

Series K Male thread right/left; Inches

page 592

EBRI/EBLI

Series E female thread right/left; Inches

page 594

WGRM WGLM right/left metric

page 596

GERMK/GELMK GERMF/GELMF GERMKE Series E Series E GELMKE metric

page 608

KSTI

Series K Inches

page 624

EFSM

Series E metric

page 638

metric

page 609

KSTM-GT Series K metric

page 626

KFSM-GT Series K metric

page 640

Series E metric

page 610

ESTM

Series E metric

page 627

EFOM HT Series E metric

page 641 NEW!*

Pressfit Spherical Bearings from page 643

KGLM Series K metric

page 648

Thrust Bearings

from page 663

Spherical Balls from page 667

Series K metric

page 649

KGLM SL Series K metric

page 650

KGLM H Series K metric

page 651

SAM metric

page 666

WKM/WKI Series K metric/Inches

page 671

566 More information

KGLM LC

www.igubal.co.uk

WEM/WEI Series E metric/Inches

page 671

RKM/REM Series K, E metric

page 672

XKM/XEM Series K, E metric

page 673

igubal®

KARM CL Series K male thread right; metric

page 582

EBRM/EBLM EARM/EALM EBRM HT Series E Series E EBLM HT female thread right/left metric

male thread right/left metric

page 584

Series E female thread right/left; metric

page 589

page 588

EARM HT EALM HT

Series E male thread right/left; metric

page 589

NEW!*

WGRM-LC WGLM-LC right/left metric

page 597

AGRM AGLM

AGRM-LC AGLM-LC

right/left metric

page 598

PKRM PKLM

Series K right/left; metric

page 599

page 600 NEW!*

NEW!*

GERMFE GELMFE Series E metric

page 611

GEFM

GBM

page 612

Series E metric

page 628

Circlip metric

page 613

NEW!* ESTM-GT

GSR

Spring-loaded pin Clevis pin metric metric

page 613

NEW!*

GERM-…-DT GEFM-...-DT GERMF-...-DT GELM-…-DT Detectable GELMF-...-DT Detectable clevis joints

page 614

spring-loaded pin Detectable combination

page 616

page 617

NEW!* ESTM-SL Series E metric

page 629

AD-01-ESTM Adapter for series E metric

page 630

EFSM HT Series E metric

page 642 NEW!*

KGLI

Series K Inches

page 652

EGLM

ECLM

Series E metric

page 653

page 654

ECLM-HD Series E metric

page 655

EGFM-… T Series E metric

page 656

EGZM Series E metric

page 658

EGXM Series E metric

page 659

NEW!*

WDGM KDGM Metric

Series K metric

page 660/661

NEW!*

JKM/JEM Series K, E metric

page 674

J4KM/J4EM UWEM Series K, E metric

page 675

Series E metric

page 676

J4VEM Series E metric

page 677

* in this catalog

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 567

igubal®

igubal® – self-aligning maintenance-free plain bearings made of high performance polymers igubal® puts a complete system of self-aligning bearings – spherical bearings, pillow block spherical bearings and rod ends – at the developer’s fingertips. Self-aligning bearings are easy to fit, adapt to all angular deviations and replace special housings in many cases. With igubal®, the user can take advantage of all the benefits of high performance polymers: vibration dampening, ability to operate in liquids or chemicals, and resistance to dirt and dust, which can impede the performance of greased metal components. They are very lightweight: 80 % lighter than steel. They save on installation space because of their small dimensions, and can save on cost at the time of purchase and during operation. igubal® bearings are also extremely cost competitive due to the elimination of maintenance and installation costs.

Advantages: Tough, resistant thermoplastic alloy Very low coefficients of friction while running dry High service life Vibration dampening Very good abrasion resistance Excellent wear resistance Maintenance-free Very good chemical resistance Suitable for rotating, oscillating and linear movements Also suitable for soft shafts

igubal® Housing Made from igumid G The housings are made of igumid G, a highly shock-resistant, long-fibre reinforced polymer. Material Table

Advantages of igubal®:

Advantages:

Exceptionally cost-effective Maintenance-free Lubrication-free Insensitive to dust and dirt Corrosion-resistant Can be used in liquid media Vibration-dampening Inner race set in housings with very low clearance Dirt can become embedded for shaft protection Light weight

igubal® Spherical Balls Made from iglidur® W300 In standard spherical bearings, the spherical ball is from the iglidur® W300 material ( page 131 ), which is known for its low coefficient of friction while running dry and extremely low tendency to stickslip. This is especially important for low loads and very slow movements. More spherical ball materials

568 More information

page 983

page 667

www.igubal.co.uk

Light weight Optimal sliding partner for iglidur® W300 spherical balls High mechanical strength Shock- and impact-resistant Corrosion-resistant Chemical-resistant Dimensionally stable

Areas of Application: igubal® bearing elements can be used without problems even in harsh environments. In moist or wet environments, the bearings are corrosion resistant, and resistant to weak acids and alkalines. The application temperatures range is from –30 to +80 °C. Resistance to dirt and dust is outstanding. Seals are not necessary, even in extremely contaminated conditions. This is true for fine dust as well as coarse dirt, which is present in agricultural equipment. The housing is made of an impact-resistant composite material which tolerates high alternating loads.

igubal®

igubal | Technical Data ®

Load

Application Temperatures

The load capacity of the maintenance-free igubal bearing element parts is very high at normal ambient temperatures. igubal® bearings absorb high forces and weigh only one fifth of traditional, metal bearing housings. The excellent dampening properties are based on the fact that the polymer material of the two part bearing can absorb vibrations differently than steel. However, plastic specific properties, such as dependence on temperature and behaviour under long-term stress, must be taken into consideration when using igubal® bear ings. The load capacity of the rod end should therefore be checked in a practical test, particularly if it will be used under continuous high loads and at elevated temperatures. Percentage tensile strength [%]

110 100 90 80 70 60 50 23

Temperature [ºC] Graph 01: Effect of the temperature on the maximum tensile strength of igubal® rod ends

Coefficients of Sliding Friction and Speed One important advantage of igubal® spherical bearings is that rapid, rotary movements of a mounted shaft take place directly in the spherical portion, made of iglidur® W300. In metallic rod ends, rotary motion takes place between the race and the spherical bearing. High speeds can be achieved with igubal® bearings. igubal® bearings are used in such a way that the angular movements of the spherical bearings take place at the outer diameter. By contrast, rotations of the shaft are supported directly in the inner diameter of the spherical portion. The advantage therefore lies in the polymer vs. steel relationship. Polymer produces lower friction and permits high speeds, even when running dry.

igubal® bearings can be used in temperatures from –30 °C to +80 °C. Table 01 shows the effect of temperature on the load capacity of igubal® bearings. igubal® Application Temperatures Minimum –30 °C Maximum, long term +80 °C Maximum, short term +120 °C Tabelle 01: Applications temperatures of igubal ® bearings Thread Description Pitch [mm] M2 0.40 M3 0.50 M4 0.70 M5 0.80 M6 1.00 M8 1.25 M10 1.50 M10 F 1.25 M12 1.75 M12 F 1.25 M14 2.00 M16 2.00 M16 F 1.50 M18 1.50 M20 1.50 M20 M20 2.50 M22 1.50 M24 2.00 M27 2.00 M30 2.00 ® Table 02: Thread pitches of igubal rod ends

Chemical Resistance The moisture absorption of igubal® is approximately 1.3 % of weight in standard atmosphere. The saturation limit in water is 6.5 %. This must be taken into account for these types of applications. iglidur® W300 and the housing made of igumid G are resistant to weak alkalines, weak acids and fuels, as well as all types of lubricants. You will find a chemicals table starting on page 974.

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 569

igubal®

igubal® | Technical Data

Medium Alcohol Hydrocarbons Greases, oils without additives Fuels Diluted acids Strong acids Diluted alkalines Strong alkalines

Resistance + to 0 + + + 0 to – – + 0

Check the Inner Diameter

Inadequate test equipment; mandril gauge to short

Wrong test equipment; caliper

Table 03: Chemical resistance of igubal® plain bearings + resistant 0 conditionally resistant – not resistant All data given at room temperature [+20 °C]

Radiation Resistance Self-aligning igubal® plain bearings are resistant to radiation up to an intensity of 3 · 102 Gy.

Tolerance test with gauge

UV Resistance The corrosion resistance of igubal® bearings gives them special value for outside applications. igubal® bearings are permanently resistant to UV radiation. A small change in colour (dark coloration) of the spherical ball due to UV radiation does not affect the mechanical, electrical or thermal properties.

Tolerances igubal® spherical bearings can be used with different tolerances according to each application. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have tolerances between h6 and h9. The tolerances are provided in the table below. Please contact us in case you require lower or other bearing tolerances. Basic size [mm] Tolerance Gauge falls Gauge hangs to 3 x,01 x,05 > 3 to 6 x,02 x,07 > 6 to 10 x,02 x,08 > 10 to 18 x,03 x,10 > 18 to 30 x,04 x,12 > 30 to 50 x,05 x,15 Table 04: Tolerances of inner diameter (spherical balls)

Service Life Calculation The igubal® expert (picture 04) allows to check the suitability of igubal® bearings for every application. You can choose from different igubal® bearings and specific load (radial, axial or static, cyclic and dynamic). The expert system will calculate from these input data: The bearing wear The theoretical service life

igubal® Expertsystem www.igus.co.uk/igubal-expert igubal® productfinder www.igus.co.uk/igubal-productfinder

570 Lifetime calculation, CAD files and much more support

www.igubal.co.uk

igubal速 rod ends

igubal速 Rod Ends Maintenance-free, self-lubricating High strength under impact loads High tensile strength Compensation of misalignment Compensation of edge loads Very low weight

571

igubal® rod ends

igubal® Rod Ends

igubal® rod ends can also be used in rough environments. They are corrosion-resistant in humid environments and resistant to weak acids and bases. The operation temperature is from –40 °C up to +80 °C. Rod ends are also insensitive to dirt and dust.

Maintenance-free, dry-running

High strength under impact loads

High tensile strength

Compensation of misalignment Compensation of edge loads

When to use it? If you want to save weight To realise rotating, oscillating and linear movements If high-frequency oscillations/vibrations preponderance If silent run is required If you need an electrical insulating article If corrosion resistance is required In combination with pneumatic cylinders and gas pressure springs If chemical resistance is required If high stiffness is requested

When not to use it? If temperatures are higher than +80 °C HT version If rotation speeds higher than 0.5 m/s are required If really high tensile and transverse loads prevail If applications with hydraulic cylinders should be realised If dimensions above 30 mm are necessary

Low weight

Temperature +80º

+200º

–30º

–40º

Standard

572

Product range

More information

18 types Ø 2–30 mm

High temperature

www.igus.co.uk/rod-end

igubal® Rod Ends | Application Examples

igubal® rod ends

Typical sectors of industry and application areas Bicycle manufacturing Plant construction Packaging Offshore etc.

Improve technology and reduce costs – 110 exciting examples online

www.igus.co.uk/igubal-applications

www.igus.co.uk/special-bikes

www.igus.co.uk/textile

www.igus.co.uk/packaging

www.igus.co.uk/offshore

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 573

igubal® rod ends

igubal® Rod Ends | Technical Data

Advantages Maintenance-free High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening Suitable for rotating, oscillating and linear movements Light weight Dimensional series K and E, according to standard DIN ISO 12240 Available with a metal sleeve to take a higher torque

Loads igubal® rod ends handle high loads at normal room temperatures, have excellent dampening properties and weigh only a fifth of traditional metallic rod ends. In applications with high continuous loads and high temperatures, the load capacity of igubal® rod ends should be tested in an experiment that simulates the application.

Coefficients of Friction and Speed One important advantage of igubal® spherical bearings is that rapid, rotary movements of a mounted shaft take place directly between the shaft and the iglidur® plain spherical bearing. In metallic rod ends, rotary motion takes place between the race and the spherical bearing. High speeds can be achieved with igubal® bearings.

Product Range igubal® rod ends are available in the dimensional series K and E for shaft diameters of 2 to 30 mm. Form A – with male thread and Form B – with female thread The dimensional series K is available in imperial dimensions, as well as a special version containing a stainless steel sleeve in the inner race. This allows a significantly higher torque than for the standard polymer race. Please ask us for more dimensons, delivery time and prices.

Temperatures Series E (types A+B) for temperatures up to +200 °C (HT material).

Tolerances igubal ® rod ends can be used at different tolerances depending on the individual application. In standard form, they are designed with a large amount of bearing clearance, which permits reliable operation even at high rotational speeds. The bore of the inner race is produced to a standard tolerance range. Shafts should also meet recommended tolerances. Please contact us if you have any questions regarding tolerances.

Pivot angle

574 Lifetime calculation, CAD files and much more support

www.igus.co.uk/rod-end

igubal® rod ends

igubal® Rod Ends | Product Overview igubal® rod ends with female thread

KBRM/KBLM

KBRM CL

Series K KBLM CL right/left Series K metric righ/left; metric (metal insert optional) (metal insert optional) from page 576

page 578

KBRI/KBLI

EBRI/EBLI

Series K right/left Inches from page 590

Series E right/left Inches from page 594

KCRM/KCLM

EBRM/EBLM

Series K Series E right/left right/left metric metric (metal insert optional) page 579

from page 584

EBRM HT/ EBLM HT Series E right/left metric page 588

igubal® rod ends with male thread

KARM/KALM

KARM CL

Series K right/left metric (metal insert otional)

Series K Series E right/left; metric right/left (metal insert optional) metric

from page 580

page 582

EARM/EALM

from page 586

EARM HT/ EALM HT Series E right/left metric page 589

KARI/KALI Series K right/left Inches from page 592

igubal® accessories for rod ends NEW!*

PKRM/PKLM Series K right/left metric page 600

GERMK/ GELMK

GERMF/ GELMF

WGRM/ WGLM

WGRM-LC WGLM-LC

AGRM AGLM

AGRM-LC AGLM-LC

Series E metric page 608

Series E metric page 609

right/left metric page 596

right/left metric page 597

right/left metric page 598

right/left metric page 599

* in this catalog

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 575

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with female thread: KBRM and KBLM

Standard design

Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening Suitable for rotating, oscillating and linear movements Very low weight Dimensional series K according to standard DIN ISO 12240 Available with a metal sleeve for a higher torque

Design with metal sleeve (MH)

Technical Data Part number

Max. static tensile strength

Max. static radial load

Min. Max. torque thread strength depth

Max. torque through ball

Weight

Long term [N]

Short term [N]

Long term [N]

Thread

Inner threading

Right-hand thread Left-hand thread

Short term [N]

[mm]

[Nm]

KBRM-02

200

100

0.30

–

0.4

100 250 250 400 700

50 125 125 200 350

5 7 7 8 11

0.50 0.75 1.00 1.50 5.00

2 5 5 10 12

4 12 12 15 40

2.7 3.5 3.4 4.7 8.6

800 800 900 900 1,000 1,300 1,300 1,600 2,100 2,100 2,200 2,300 2,500 2,500

400 400 450 450 500 650 650 800 1,050 1,050 1,100 1,150 1,250 1,250

13 13 15 15 17 19 19 21 22 22 25 28 34 34

15.00 6.00 20.00 15.00 25.00 30.00 27.50 45.00 60.00 60.00 75.00 120.00 135.00 135.00

20 20 30 30 35 40 40 45 55 55 60 60 60 60

50 50 70 70 75 110 110 150 200 200 – – – –

14.6 14.6 22 22 30.9 39.6 39.6 55 73.5 73.5 94.8 119.8 177 189.6

KBLM-02

KBRM-03 KBLM-03 800 400 KBRM-05 M4 KBLM-05 M4 1,000 500 KBRM-05 KBLM-05 1,000 500 KBRM-06 KBLM-06 1,400 700 KBRM-08 KBLM-08 2,100 1,050 KBRM-10 KBLM-10 3,100 1,550 KBRM-10 F KBLM-10 F 3,100 1,550 KBRM-12 KBLM-12 3,600 1,800 KBRM-12 F KBLM-12 F 3,600 1,800 KBRM-14 KBLM-14 4,000 2,000 KBRM-16 KBLM-16 4,200 2,100 KBRM-16 F KBLM-16 F 4,200 2,100 KBRM-18 KBLM-18 4,600 2,300 KBRM-20 KBLM-20 5,400 2,700 KBRM-20 M20 KBLM-20 M20 5,400 2,700 KBRM-22 KBLM-22 7,000 3,500 KBRM-25 KBLM-25 8,500 4,250 KBRM-30 KBLM-30 10,500 5,250 KBRM-30 M27x2 KBLM-30 M27x2 10,500 5,250

576 Lifetime calculation, CAD files and much more support

Standard Standard without MH with MH [Nm] [Nm]

[g]

www.igus.co.uk/en/kbrm

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: KBRM and KBLM

B C1

Order key

KB…M-02

Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

d4 d5

d3 W

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [mm] Part number

h1 l3

Max. pivot angle

2 3 5

9 13 18

M02 M03 M04

4.0 6.5 9.0

4.6 8.0 12.0

3.0 4.5 6.0

4 12.5 6 6 18.5 7 8 27 10

17 25 36

SW04 SW06 SW09

30° 30° 30°

5 6 8 10 10 12 12 14 16 16 18 20 20 22 25 30 30

18 20 24 30 30 34 34 38 42 42 46 50 50 56 60 70 70

M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M18 x 1.5 M20 x 1.5 M20 x 2.5 M22 x 1.5 M24 x 2.0 M30 x 2.0 M27 x 2.0

9.0 10.0 13.0 15.0 15.0 18.0 18.0 20.0 22.0 22.0 25.0 28.0 28.0 30.0 32.0 37.0 37.0

12.0 13.0 16.0 19.0 19.0 22.0 22.0 25.0 27.0 27.0 31.0 34.0 34.0 37.0 41.0 50.0 50.0

6.0 7.0 9.0 10.5 10.5 12.0 12.0 13.5 15.0 15.0 16.5 18.0 18.0 20.0 22.0 25.0 25.0

8 27 10 9 30 12 12 36 16 14 43 20 14 43 20 16 50 22 16 50 22 19 57 25 21 64 28 21 64 28 23 71 32 25 77 33 25 77 33 28 84 37 31 94 42 37 110 50 37 110 50

36 40 48 58 58 67 67 76 85 85 94 102 102 112 124 145 145

SW09 SW11 SW14 SW17 SW17 SW19 SW19 SW22 SW22 SW22 SW27 SW30 SW30 SW32 SW36 SW41 SW41

30° 29° 25° 25° 25° 25° 25° 25° 23° 23° 23° 23° 23° 22° 22° 22° 22°

E10 Right-hand thread Left-hand thread

KBRM-02 KBRM-03 KBRM-05 M4 KBRM-05 KBRM-06 KBRM-08 KBRM-10 KBRM-10 F KBRM-12 KBRM-12 F KBRM-14 KBRM-16 KBRM-16 F KBRM-18 KBRM-20 KBRM-20 M20 KBRM-22 KBRM-25 KBRM-30 KBRM-30 M27x2

KBLM-02 KBLM-03 KBLM-05 M4 KBLM-05 KBLM-06 KBLM-08 KBLM-10 KBLM-10 F KBLM-12 KBLM-12 F KBLM-14 KBLM-16 KBLM-16 F KBLM-18 KBLM-20 KBLM-20 M20 KBLM-22 KBLM-25 KBLM-30 KBLM-30 M27x2

For rod ends with metal insert please add MH to the part number, e. g. KRBM-10 MH (Inner-Ø: 10 mm).

delivery available time from stock

prices price list online www.igus.co.uk/en/kbrm

order Part number example KBRM-02

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 577

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends, female thread; 2nd generation: KBRM CL and KBLM CL B C1

Order key d1

Ød2

KB…M-06 CL

2nd Generation Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

d3 d4

Housing with female thread Smooth design has no dirt traps Compensation of misalignment Light weight Excellent corrosion resistance Design with metal sleeve for higher torque strength available Standard spherical bearing: iglidur® W300

Material: Housing: igumid G page 983 Spherical ball: variable page 667

Technical Data Part number

Max. static tensile strength

Right-hand thread Left-hand thread

KBRM-06 CL KBRM-08 CL KBRM-10 CL

KBLM-06 CL KBLM-08 CL KBLM-10 CL

Max. static radial load

Short term [N]

Long term [N]

Short term [N]

Long term [N]

1,400 2,100 3,100

700 1,050 1,550

300 500 800

150 250 400

Min. Max. torque thread strength depth Inner Thread [mm]

threading [Nm]

8 11 13

0.75 2.0 3.0

Max. torque through ball

Weight

Standard Standard without MH with MH [Nm] [Nm]

10 12 20

15 40 50

[g]

4.5 8.6 14.1

Dimensions [mm] Part number Right-h. thread

d1 Left-h. thread

E10

Max. pivot angle α

KBRM-06 CL KBLM-06 CL KBRM-08 CL KBLM-08 CL KBRM-10 CL KBLM-10 CL

M06

SW10

40 36.5 30

20 46.5

5.7

40°

8 10

24 30

M08 M10

SW13 SW15

12 9 48 44.3 36 14 10.5 58 52.2 43

25 56.3 30 67.2

7.5 8.4

35° 35°

For rod ends with metal insert please add MH to the part number, e. g. KBRM-10 CL MH (Inner-Ø: 10 mm). For another spherical bearing material please add J, R or X to the part number, e. g. KBRM-10 CL J.

Spherical ball material to choose RKM: low-cost

page 667 XKM: high temperatures

JKM: Low moisture absorption

578 Lifetime calculation, CAD files and much more support

W300: standard spherical bearing with metal sleeve

www.igus.co.uk/en/kbrm-cl

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: KCRM and KCLM

Order key

KC...M-06 Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

Housing with female thread, Standard spherical ball: iglidur® W300 Smooth design has no dirt traps Spherical ball is clipped in Choice of iglidur® ball materials Compensation of misalignment Light weight Universal corrosion resistance Standard spherical bearing: iglidur® W300

Material: Housing: igumid G page 983 Spherical ball: variable page 667

Technical Data Part number

Max. static tensile strength

Max. static radial load

Max. torque strength

Max. torque through balls

Short term Long term Short term Long term Inner threading Right-hand thread Left-hand thread

KCRM-06 KCRM-08 KCRM-10

KCLM-06 KCLM-08 KCLM-10

[N]

[Nm]

1,400 2,100 3,100

700 1,050 1,500

300 500 800

150 250 400

0.75 2 3

Standard

Weight

Standard

with MH[Nm] with MH[Nm]

10 12 20

15 40 50

[g]

4.2 7.6 12,8

Dimensions [mm] Part number

Max. pivot angle

Right-hand thread Left-hand thread

KCRM-06

KCLM-06

M06

SW10

9.0

13.5

40°

KCRM-08 KCRM-10

KCLM-08 KCLM-10

8 10

24 30

M08 M10

SW13 SW15

12.0 14.0

9 10.5

36 43

17 22

48 58

35° 35°

For rod ends with metal insert please add MH to the part number, e. g. KCRM-10 MH (Inner-Ø: 10 mm).

delivery available time from stock

prices price list online www.igus.co.uk/en/kcrm

order Part number example KCRM-06

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 579

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with male thread: KARM and KALM

Standard design

Maintenance-free, self-lubricating High strength ander impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-restistant High vibration dampening capacity Suitable for rotating, oscillating, and linear movements Light weight Dimensional series K according to standard DIN ISO 12240 Available with metal sleeve for higher torque

Design with metal sleeve (MH)

Technical Data Part number

Max. static tensile strength

Max. static radial load

Right-hand thread Left-hand thread

Short term [N]

Long term [N]

Short term [N]

Long term [N]

[mm]

Outer threading [Nm]

KARM-05

KALM-05

800

400

0.4

2.7

KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-20 M20 KARM-22 KARM-25 KARM-30

KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-20 M20 KALM-22 KALM-25 KALM-30

100 200 300 300 400

50 100 150 150 200

15 18 20 20 22

0.5 2.0 5.0 3.0 6.0

10 12 20 20 30

15 40 50 50 70

3.9 7.1 12.5 12.5 18

22 25 26 26 29 32 32 34 39 46

6.0 12.0 17.0 17.0 20.0 25.0 25.0 25.0 45.0 85.0

30 35 40 40 45 55 55 60 65 70

70 75 110 110 150 200 200 – – –

18 25 34 34 45.9 58 58 86.2 99.1 160.4

1,000 500 1,700 850 2,500 1,250 2,500 1,250 2,700 1,350 2,700 3,400 3,900 3,900 4,200 6,000 6,000 7,200 7,500 8,800

1,350 1,700 1,950 1,950 2,100 3,000 3,000 3,600 3,750 4,400

400 200 700 350 800 400 800 400 1,000 500 1,300 650 1,300 650 1,500 750 1,900 950 2,300 1,150

Min. Max. torque thread strength depth Thread

580 Lifetime calculation, CAD files and much more support

Max. torque through ball

Weight

Standard Standard without MH with MH [Nm] [Nm]

[g]

www.igus.co.uk/en/karm

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with male thread: KARM and KALM

Order key

B C1

KA…M-05 Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (male thread) Series

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [mm] Part number

Max. pivot angle

18 20 24 30 30 34 34 38 42 42 46 50 50 56 61 71

M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M18 x 1.5 M20 x 1.5 M20 x 2.5 M22 x 1.5 M24 x 2.0 M30 x 2.0

6.0 7.0 9.0 10.5 10.5 12.0 12.0 13.5 15.0 15.0 16.5 18.0 18.0 20.0 22.0 25.0

8.0 9.0 12.0 14.0 14.0 16.0 16.0 19.0 21.0 21.0 23.0 25.0 25.0 28.0 31.0 37.0

33 36 42 48 48 54 54 61 66 66 72 78 78 84 95 112

19 21 25 28 28 32 32 36 37 37 41 45 45 48 55 66

42 46 55 63 63 71 71 79 88 88 96 104 104 112 126 147

30° 29° 25° 25° 25° 25° 25° 25° 23° 23° 23° 23° 23° 22° 22° 22°

E10 Right-hand thread

Left-hand thread

KARM-05 KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-20 M20 KARM-22 KARM-25 KARM-30

KALM-05 KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-20 M20 KALM-22 KALM-25 KALM-30

5 6 8 10 10 12 12 14 16 16 18 20 20 22 25 30

For rod ends with metal insert please add MH to the part number, e. g. KARM-10 MH (Inner-Ø: 10 mm).

delivery available time from stock

prices price list online www.igus.co.uk/en/karm

order Part number example KARM-05

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 581

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends, male thread; 2nd generation: KARM CL B C1

Order key d1

KARM-06 CL l1

2nd Generation Dimension Metric Thread Housing (male thread) Series

Male thread Smooth design has no dirt traps Compensation of misalignment Light weight Excellent corrosion resistance Design with metal sleeve for higher torque strength available Left-hand thread version KALM in preparation Standard spherical bearing: iglidur® W300

Material: Housing: igumid G page 983 Spherical ball: variable page 667

Technical data Part number

Max. static tensile strength

Max. radial load

Min. thread depth

Short term Long term Short term Long term [N] [N] [N] [N]

KARM-06 CL KARM-08 CL KARM-10 CL KARM-12 CL

Max. torque strength

Max. torque through ball

Weight

Thread [mm]

Outer threading [Nm]

Standard without MH [Nm]

Standard with MH [Nm]

[g]

1,000 1,700 2,500

500 850 1,250

100 200 300

50 100 150

15 18 20

0.5 2.0 5.0

10 12 20

15 40 50

3.5 6.2 11.2

2,700

1,350

400

200

6.0

15.6

Dimensions [mm] Part number

Max. pivot angle

E10

KARM-06 CL

M06

7.0

9.0

40°

KARM-08 CL KARM-10 CL KARM-12 CL

8 10 12

24 30 34

M08 M10 M12

9.0 10.5 12.0

12.0 14.0 16.0

42 48 54

25 28 32

55 63 71

35° 35° 35°

Rod ends can be ordered in metric dimensions with metal insert with the addition of MH after the part numbers listed here Part numbern, e. g. KARM-10 MH (Inner-Ø: 10 mm). For another spherical bearing material please add J, R or X to the part number, e. g. KARM-10 CL J.

delivery available time from stock

prices price list online www.igus.co.uk/en/karm-cl

582 Lifetime calculation, CAD files and much more support

order Part number example KARM-06 CL www.igus.co.uk/en/karm-cl

My Sketches

igubal速 rod ends

igus速 (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 583

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with female thread: EBRM and EBLM

Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements Light weight Dimensional series E according to standard DIN ISO 12240 50 % higher tensile force possible due to metal inlay (only dimension 16, more dimensions on request)

Technical Data Part number

Max. static tensile strength

Max. static radial load

Short term Long term Short term Long term

Min. thread depth

Max. torque Max. torque Weight strength through ball

Thread

Inner threading

Right-hand thread Left-hand thread

[N]

[mm]

[Nm]

[g]

EBRM-04 EBLM-04 EBRM-05 EBLM-05 EBRM-06 EBLM-06 EBRM-08 EBLM-08 EBRM-10 EBLM-10 EBRM-10 F EBLM-10 F EBRM-12 EBLM-12 EBRM-12 F EBLM-12 F EBRM-15 EBLM-15 EBRM-16 EBLM-16 EBRM-16 F EBLM-16 F EBRM-17 EBLM-17 EBRM-17 F EBLM-17 F EBRM-20 EBLM-20 EBRM-20 M20 EBLM-20 M20 EBRM-25 EBLM-25 EBRM-30 EBLM-30

800 1,300 1,500

400 650 750

100 150 200

50 75 100

7 8 8

0.4 0.5 1.5

2.0 2.0 2.5

1.8 3.2 4

2,000 2,300 2,300 3,300 3,300 4,800 5,000 5,000 5,300 5,300 7,200 7,200 10,000 10,500

1,000 1,150 1,150 1,650 1,650 2,400 2,500 2,500 2,650 2,650 3,600 3,600 5,000 5,250

450 500 500 550 550 800 850 850 1,100 1,100 1,800 1,800 2,600 3,000

225 250 250 275 275 400 425 425 550 550 900 900 1,300 1,500

11 13 13 14 14 18 18 18 19 19 22 22 27 33

5.0 15.0 6.0 20.0 15.0 25.0 20.0 15.0 30.0 27.5 60.0 60.0 115.0 130.0

7.0 14.0 14.0 25.0 25.0 30.0 32.0 32.0 35.0 35.0 40.0 40.0 55.0 70.0

6.9 11.2 11.2 17.1 17.1 28.9 32.6 32.6 42.4 42.4 65.8 65.8 125.9 184.1

Spherical ball material to choose J4VEM: clearance-free

page 667 JEM: low moisture absorption

REM: low-cost

584 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/ebrm

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: EBRM and EBLM B C1

Order key

EB…M-04

Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

d3 W

d4 d5

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671 More spherical balls on request page 667

Dimensions [mm] Part number

– 11 13 16 19 19 22 22 26 – – 30 30 34 34 41 48

3.5 4.4 4.4 6.0 7.0 7.0 8.0 8.0 10.0 10.5 10.5 11.0 11.0 13.0 13.0 17.0 19.0

5 6 6 8 9 9 10 10 12 13 13 14 14 16 16 20 22

E10 Right-h. thread

Max. pivot angle

Left-h. thread

4 5 6 8 10 10 12 12 15 16 16 17 17 20 20 25 30

delivery available time from stock

15 M04 – 19 M05 9.0 21 M06 11.0 24 M08 13.0 29 M10 15.0 29 M10 x 1.25 15.0 34 M12 18.0 34 M12 x 1.25 18.0 40 M14 21.0 43 M16 – 43 M16 x 1.5 – 46 M16 24.0 46 M16 x 1.5 24.0 53 M20 x 1.5 27.0 53 M20 x 2.5 27.0 64 M24 x 2.0 34.0 73 M30 x 2.0 41.0

prices price list online www.igus.co.uk/en/ebrm

22.5 9.5 30.0 SW08 30 12 39.5 SW09 30 8 40.5 SW11 36 14 48.0 SW14 43 18 57.5 SW17 43 18 57.5 SW17 50 20 67.0 SW19 50 20 67.0 SW19 61 26 81.0 SW22 64.5 26.5 86.0 SW22 64.5 26.5 86.0 SW22 67 27 90.0 SW27 67 27 90.0 SW27 77 31 103.5 SW30 77 31 103.5 SW30 94 38 126.5 SW36 110 47 146.5 SW41

33° 33° 27° 24° 24° 24° 21° 21° 21° 21° 21° 18° 18° 16° 16° 16° 13°

order Part number example EBRM-04

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 585

igubal速 rod ends

igubal速 Rod Ends | Product Range

Rod ends with male thread: EARM and EALM

Maintenance-free, dry-running High stiffness Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating, and linear movements Light weight Dimensional series E according to standard DIN ISO 12240

Technical Data Part number

Max. static tensile strength

Max. static radial load

Short term Long term Short term Long term Right-hand thread Left-hand thread

EARM-05 EARM-06 EARM-08 EARM-10

EALM-05 EALM-06 EALM-08 EALM-10

Min. thread depth

Max. torque Max. torque Weight strength through ball

Thread

Outer threading

[N]

[mm]

[Nm]

[g]

550 850 1,600 2,600

275 425 800 1,300

50 80 160 250

25 40 80 125

14 14 17 19

0.4 0.5 2.0 5.0

2.0 2.5 7.0 14.0

2.2 2.7 5.1 8.4

EARM-10 F

EALM-10 F

2,600

1,300

250

125

3.0

14.0

8.4

EARM-12 EARM-12 F EARM-15 EARM-17 EARM-17 F EARM-20 EARM-20 M20 EARM-25 EARM-30

EALM-12 EALM-12 F EALM-15 EALM-17 EALM-17 F EALM-20 EALM-20 M20 EALM-25 EALM-30

3,100 3,100 3,400 3,600 3,600 6,800 6,800 7,000 7,000

1,550 1,550 1,700 1,800 1,800 3,400 3,400 3,500 3,500

300 300 600 900 900 1,700 1,700 1,000 2,000

150 150 300 450 450 850 850 500 1,000

20 20 24 26 26 30 30 37 46

6.0 6.0 12.5 17.5 21.0 25.0 25.0 45.0 85.0

25.0 25.0 30.0 35.0 35.0 40.0 40.0 55.0 70.0

14.3 14.3 21.1 30.2 30.2 57.3 57.3 94.8 156.4

Spherical ball material to choose J4VEM: clearance-free preloaded

page 667 JEM: low moisture absorption

REM: Low-cost

586 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/earm

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with male thread: EARM and EALM B C1

Order key

EA…M-05

Abmessung Metric Thread L = left-hand thread R = right-hand thread Housing (male thread) Series Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671 More spherical balls on request page 667

Dimensions [mm] Part number

Max. pivot angle

19 21 24 29 29 34 34 40 46 46 53 53 64 73

M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M20 x 1.5 M20 x 2.5 M24 x 2.0 M30 x 2.0

4.4 4.4 6.0 7.0 7.0 8.0 8.0 10.0 11.0 11.0 13.0 13.0 17.0 19.0

6 6 8 9 9 10 10 12 14 14 16 16 20 22

36 36 41 47.5 47.5 54 54 63 69 69 80 80 97 113

20 20 24 27 27 29 29 34 37 37 43 43 53 65

45.5 46.5 53.0 62.0 62.0 71.0 71.0 83.0 92.0 92.0 106.5 106.5 129.0 149.5

33° 27° 24° 24° 24° 21° 21° 21° 18° 18° 16° 16° 16° 13°

E10 Right-hand thread Left-hand thread

EARM-05 EARM-06 EARM-08 EARM-10 EARM-10 F EARM-12 EARM-12 F EARM-15 EARM-17 EARM-17 F EARM-20 EARM-20 M20 EARM-25 EARM-30

EALM-05 EALM-06 EALM-08 EALM-10 EALM-10 F EALM-12 EALM-12 F EALM-15 EALM-17 EALM-17 F EALM-20 EALM-20 M20 EALM-25 EALM-30

delivery available time from stock

5 6 8 10 10 12 12 15 17 17 20 20 25 30

prices price list online www.igus.co.uk/en/earm

order Part number example EARM-05

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 587

igubal® rod ends

igubal® Rod Ends | Product Range

High temperature rod ends with female thread: EBRM-HT and EBLM-HT

Order key

B C1

EB…M-05-HT

High Temperature Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

50° d3 W

d4 d5

For temperatures up to +200 °C Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements Light weight

Material: Housing: iguton G page 983 Spherical ball: iglidur® X page 673

Dimensions [mm] Part number

E10 Right-hand thread

Max. Weight pivot angle [g]

Left-hand thread

EBRM-05-HT EBLM-05-HT

M05 9.0

4.4

12 39.5 SW09

33°

3.8

EBRM-06-HT EBRM-08-HT EBRM-10-HT EBRM-12-HT

6 8 10 12

21 24 29 34

M06 M08 M10 M12

13 16 19 22

4.4 6.0 7.0 8.0

6 8 9 10

30 36 43 50

12 16 18 20

27° 24° 24° 21°

5 8.5 13.7 21.4

EBLM-06-HT EBLM-08-HT EBLM-10-HT EBLM-12 HT

delivery available time from stock

11.0 13.0 15.0 18.0

prices price list online www.igus.co.uk/en/ebrm-ht

588 Lifetime calculation, CAD files and much more support

40.5 48.0 57.5 67.0

SW11 SW14 SW17 SW19

order Part number example EBRM-05 HT www.igus.co.uk/en/ebrm-ht

igubal® rod ends

igubal® Rod Ends | Product Range High temperature rod ends with male thread: EARM-HT and EALM-HT B C1

Order key

EA…M-05-HT

High Temperature Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (male thread) Series

Material: Housing: iguton G page 983 Spherical ball: iglidur® X page 673

Dimensions [mm] Part number

19 21 24 29 34

M05 M06 M08 M10 M12

4.4 4.4 6.0 7.0 8.0

6 6 8 9 10

36 36 41 47.5 54

20 20 24 27 29

45.5 46.5 53.0 62.0 71.0

E10 Right-hand thread

Left-hand thread

EARM-05-HT EARM-06-HT EARM-08-HT EARM-10-HT EARM-12-HT

EALM-05-HT EALM-06-HT EALM-08-HT EALM-10-HT EALM-12-HT

delivery available time from stock

5 6 8 10 12

prices price list online www.igus.co.uk/en/earm-ht

Max. Weight pivot angle [g] 33° 27° 24° 24° 21°

2.8 3.4 6.1 10.2 15.7

order Part number example EARM-05 HT

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 589

igubal速 rod ends

igubal速 Rod Ends | Product Range | Inch

Rod ends with female thread: KBRI and KBLI

Technical Data Part number

Max. static tensile strength

Max. radial load

Short term Long term Short term Long term Right-hand thread Left-hand thread

KBRI-03 KBRI-04 KBRI-05 KBRI-06 KBRI-07 KBRI-08 KBRI-10 KBRI-12 KBRI-16

KBLI-03 KBLI-04 KBLI-05 KBLI-06 KBLI-07 KBLI-08 KBLI-10 KBLI-12 KBLI-16

Min. thread depth

Max. torque strength

Thread

Inner threading

Max. Weight torque through ball

[N]

[Inch]

[Nm]

[g]

900 1,100 1,700 2,000 2,300 2,600 4,900 5,600 6,000

450 550 850 1,000 1,150 1,300 2,450 2,800 3,000

300 400 500 1,000 1,200 1,500 1,700 2,300 2,600

150 200 250 500 600 750 850 1,150 1,300

.350 .480 .480 .568 .655 .743 .962 1.093 1.488

2 5 6 7 18 23 30 40 46

3 4 10 15 25 35 50 70 85

3.3 5.1 7.1 12.6 16.1 26.5 38.7 54.4 197.5

590 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/kbri

igubal® rod ends

igubal® Rod Ends | Product Range | Inch Rod ends with female thread: KBRI and KBLI B C1

Order key

KB…I-03

Dimension Inch Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

d3 W

d4 d5

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [Inch] Part number

Max. pivot angle

.406

.246

.312

1.062

.500

1.374

.312

25°

.469 .272 .365 .500 .340 .437 .687 .394 .500 .750 .456 .562 .875 .487 .625 1.000 .545 .750 1.125 .676 .875 1.625 1.000 1.375

1.312 1.375 1.625 1.812 2.125 2.500 2.875 4.125

.687 .687 .812 .937 1.062 1.375 1.562 2.125

1.687 .375 1.813 .437 2.125 .562 2.374 .625 2.781 .750 3.250 .875 3.750 1.000 5.500 1.500

25° 25° 22° 22° 22° 22° 22° 20°

E10

Right-h. thread Left-h. thread

KBRI-03

KBLI-03

.1900

.625

10-32

KBRI-04 KBRI-05 KBRI-06 KBRI-07 KBRI-08 KBRI-10 KBRI-12 KBRI-16

KBLI-04 KBLI-05 KBLI-06 KBLI-07 KBLI-08 KBLI-10 KBLI-12 KBLI-16

.2500 .3125 .3750 .4375 .5000 .6250 .7500 1.0000

.750 .875 1.000 1.125 1.312 1.500 1.750 2.750

1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 3/4-16 1-12

delivery available time from stock

prices price list online www.igus.co.uk/en/kbri

order Part number example KBRI-03

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 591

igubal速 rod ends

igubal速 Rod Ends | Product Range | Inch

Rod ends with male thread: KARI and KALI

Technical Data Part number

Max. static tensile strength

Max. radial load

Min. thread depth

Short term Long term Short term Long term Right-hand thread Left-hand thread

KARI-03 KARI-04 KARI-05 KARI-06 KARI-07 KARI-08 KARI-10 KARI-12 KARI-16

KALI-03 KALI-04 KALI-05 KALI-06 KALI-07 KALI-08 KALI-10 KALI-12 KALI-16

Max. torque strength

Max. Weight torque through ball

Outer threading

[N]

[Inch]

[Nm]

[g]

390 900 1,100 1,500 2,000 2,500 3,500 3,900 4,400

200 450 550 750 1,000 1,250 1,750 1,950 2,200

70 100 150 350 400 450 600 1,000 1,300

35 50 75 175 200 225 300 500 650

.525 .700 .875 .875 .962 1.050 1.137 1.226 1.488

0.5 1.0 2.0 3.0 6.0 9.0 12.0 25.0 45.0

3 4 10 15 25 35 50 70 85

2.1 3.5 6 8.8 12.4 18.5 27.6 42.8 143.3

592 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/kari

igubal® rod ends

igubal® Rod Ends | Product Range | Inch Rod ends with male thread: KARI and KALI

Order key

KA…I-03 Dimensions Inch Thread L = left-hand thread R = right-hand thread Housing (male thread) Series Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [Inch] Part number

Max. pivot angle

.312 .365 .437 .500 .562 .625 .750 .875 1.375

1.250 1.562 1.875 1.938 2.125 2.428 2.625 2.875 4.125

.750 1.000 1.250 1.250 1.375 1.500 1.625 1.750 2.350

1.563 1.937 2.313 2.438 2.688 2.094 3.375 3.750 5.500

25° 25° 25° 22° 22° 22° 22° 22° 20°

E10 Right-hand thread Left-hand thread

KARI-03 KARI-04 KARI-05 KARI-06 KARI-07 KARI-08 KARI-10 KARI-12 KARI-16

KALI-03 KALI-04 KALI-05 KALI-06 KALI-07 KALI-08 KALI-10 KALI-12 KALI-16

delivery available time from stock

.1900 .2500 .3125 .3750 .4375 .5000 .6250 .7500 1.0000

.625 10-32 .234 .750 1/4-28 .250 .875 5/16-24 .312 1.000 3/8-24 .359 1.125 7/16-20 .406 1.312 1/2-20 .453 1.500 5/8-18 .484 1.750 3/4-16 .593 2.750 1-12 1.000

prices price list online www.igus.co.uk/en/kari

order Part number example KARI-03

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 593

igubal速 rod ends

igubal速 Rod Ends | Product Range | Inch

Rod ends with female thread: EBRI and EBLI

Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements Light weight Dimensional series K according to standard DIN ISO 12240

Technical Data Part number

Max. static tensile strength

Max. radial load

Short term Long term Short term Long term Right-hand thread Left-hand thread

EBRI-03 EBRI-04 EBRI-05 EBRI-06 EBRI-07 EBRI-08 EBRI-10 EBRI-12

EBLI-03 EBLI-04 EBLI-05 EBLI-06 EBLI-07 EBLI-08 EBLI-10 EBLI-12

Min. thread depth

Max. torque strength

Weight

Inner threading

Max. torque through ball

Thread

[N]

[Inch]

[Nm]

[g]

1,300 1,500 2,000 2,300 3,300 3,300 5,000 7,200

650 750 1,000 1,150 1,650 1,650 2,500 3,600

150 200 450 500 550 550 850 1,800

75 100 225 250 275 275 425 900

.315 .315 .433 .512 .551 .551 .709 .866

2 5 6 7 18 23 30 40

2.0 2.5 7.0 14.0 25.0 25.0 32.0 40.0

3,1 3,8 6.9 11.5 17.6 18.1 31.9 61.5

594 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/ebri

igubal® rod ends

igubal® Rod Ends | Product Range | Inch Rod ends with female thread: EBRI and EBLI B C1

Order key

EB…I-03

Dimensions Inches Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

50°

d3 W

d4 d5

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [Inch] Part number

0.748 0.827 0.945 1.142 1.339 1.339 1.693 2.087

10–32 1/4–28 5/16–24 3/8–24 7/16–20 1/2–20 5/8–18 3/4–16

0.3543 0.4331 0.5118 0.5906 0.7087 0.7087 – 1.0630

0.4331 0.5118 0.6299 0.7480 0.8661 0.8661 – 1.3386

0.1732 0.1732 0.2362 0.2756 0.3150 0.3150 0.4134 0.5118

0.1900 0.2500 0.3125 0.3750 0.4063 0.4063 0.5000 0.6250

E10 Right-h. thread Left-h. thread

EBRI-03 EBRI-04 EBRI-05 EBRI-06 EBRI-07 EBRI-08 EBRI-10* EBRI-12

EBLI-03 EBLI-04 EBLI-05 EBLI-06 EBLI-07 EBLI-08 EBLI-10* EBLI-12

0.1900 0.2500 0.3125 0.3750 0.4375 0.5000 0.6250 0.7500

Part number

Max. pivot angle

0.4724 0.4724 0.6299 0.7087 0.7874 0.7874 1.0433 1.2205

0.35 0.43 0.55 0.67 0.75 0.75 0.87 1.18

30° 25° 22° 22° 18° 18° 16° 14°

E10 Right-hand thread

Left-hand thread

EBRI-03 EBRI-04 EBRI-05 EBRI-06 EBRI-07 EBRI-08 EBRI-10* EBRI-12

EBLI-03 EBLI-04 EBLI-05 EBLI-06 EBLI-07 EBLI-08 EBLI-10* EBLI-12

1.1811 1.1811 1.4173 1.6929 1.9685 1.9685 2.5394 3.0315

* EBRI-10/EBLI-10 special form with hexagonal foot

delivery available time from stock

prices price list online www.igus.co.uk/en/ebri

order Part number example EBRI-03

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 595

igubal® rod ends

igubal® Rod Ends | Product Range

Angle joint for rotating and pivoting motions: WGRM and WGLM

Order key

ød

WG...M-05 Dimension Metric Thread L = left-hand thread R = right-hand thread Housing Angle joint

l5 e

l1 d2

Connection for rotating and swivelling movements Light weight and robust Easy and quick assembly Vibration-dampening Insensitive to dirt and dust l2

ød

Material: e 1 Housing: igumid G page 983 ød Spherical cap: iglidur® W300 page 131 d2

l5 e

Technical Data Part number

Max. axial tensile force

Max. axial compressive force

Max. axial tensile force

(Ball stud axis*)

(Ball stud axis)

(Housing axis)

Short time Long term Short term Long term Short term Long term Right-h. thread Left-h. thread

WGRM-05 WGRM-06 WGRM-08 WGRM-10

WGLM-05 WGLM-06 WGLM-08 WGLM-10

Max. axial tensile Weight force in housing axis, with metal ball stud Short term

Long term

[N]

[g]

30 35 250 250

15 17.5 125 125

200 300 500 900

100 150 250 450

100 140 200 400

50 70 100 200

600 800 1,500 1,900

300 400 750 950

2.6 3.8 8 13.7

* MS = metal stud; e.g.: WGRM-05 MS

Dimensions [mm] Part number

+0.1

+0.5

+0.2

+0.3

Right-hand threadLeft-hand thread

–0.1

–0.5

–0.2

–0.3

WGRM-05 WGRM-06 WGRM-08 WGRM-10

8.0 M5 10.0 M6 13.0 M8 16.0 M10

WGLM-05 WGLM-06 WGLM-08 WGLM-10

delivery available time from stock

+0.5

+0.3

+0.5

–0.5

–0.3

–0.5

12.8 9.0 10.2 14.0 8.2 25.6 22.0 14.8 11.0 12.5 16.0 10.5 30.9 25.0 19.3 13.0 16.5 18.0 13.5 38.8 30.0 24.0 16.0 20.0 20.0 16.0 47.0 35.0

28.4 32.4 39.7 47.0

11.0 13.0 16.0 18.0

Min.

prices price list online www.igus.co.uk/en/wgrm

596 Lifetime calculation, CAD files and much more support

Max. pivot angle

SW 8 SW 9 SW12 SW14

25° 25° 25° 25°

order Part number example WGRM-05 www.igus.co.uk/rod-end

igubal® rod ends

igubal® Rod Ends | Product Range Ball and socket joint (low-cost): WGRM LC and WGLM LC

Order key

WG...M-05 LC Low-cost Dimension Metric Thread L = left-hand thread R = right-hand thread Angle joint

Dimensions as WGRM LC (low-cost) version is a two piece assembly with either a plastic or metal stud Low weight Maintenance-free Plastic stud for lowest price, metal stud for highest load

Material: Housing: igumid G

page 983

Technical Data Part number

Max. axial tensile force

Max. axial compressive force

Max. axial tensile force

(Ball stud axis*)

(Ball stud axis)

(Housing axis)

Max. axial tensile Weight force in housing axis, with metal ball stud

Short time Long term Short term Long term Short term Long term Short term Right-h. thread

WGRM-05 LC WGRM-06 LC WGRM-08 LC WGRM-10 LC

Left-h. thread

WGLM-05 LC WGLM-06 LC WGLM-08 LC WGLM-10 LC

Long term

[N]

[g]

30 35 250 250

15 17.5 125 125

200 300 500 900

100 150 250 450

100 140 200 400

50 70 100 200

600 800 1,500 1,900

300 400 750 950

2.6 4 8.2 13.8

* MS = metal stud; e.g.: WGRM-05 LC MS

Dimensions [mm] – technical drawing Part number Right-h. thread Left-h. thread

page 596 l1

+0.1

+0.5 +0.2 +0.3

–0.1

–0.5

WGRM-05 LC WGLM-05 LC 8.0

–0.2

–0.3

+0.4 +0.5 +0.5 Min. –0.4

–0.5

Piv. angle

+0.3 +0.5 +0.5 Recom. Max. –0.3

–0.5 –0.5

M5 12.8 9.0 10.2 14.0 8.2 10.8 0.65 25.6 SW 8 22.0 28.4 11,0 18 °

25°

WGRM-06 LC WGLM-06 LC 10.0 M6 14.8 11.0 12.5 16.0 10.5 12.3 0.70 30.9 SW 9 25.0 32.4 13,0 18 ° WGRM-08 LC WGLM-08 LC 13.0 M8 19.3 13.0 16.5 18.0 13.5 16.2 1.15 38.8 SW 12 30.0 39.7 16,0 18 ° WGRM-10 LC WGLM-10 LC 16.0 M10 24.0 16.0 20.0 20.0 16.0 20.0 1.15 47.0 SW 14 35.0 47.0 18,0 18 °

25° 25° 25°

delivery available time from stock

prices price list online www.igus.co.uk/en/wgrm-lc

order Part number example WGRM-05 LC

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 597

igubal® rod ends

igubal® Rod Ends | Product Range

Axial joint: AGRM and AGLM S1 d2

Order key

AG...M-08

Dimension Metric Thread L = left-hand thread R = right-hand thread Axial joint

ød1

For all mechanical combinations Very easy hand assembly Maintenance-free and predictable Corrosion-resistant Chemical-resistant Good vibration-dampening qualities

Material: Housing: igumid G page 983 Spherical cap: iglidur® W300 page 131

Technical data Part number

Max. static axial tensile force

Right-hand thread

Left-hand thread

AGRM-08

AGLM-08

Max. static axial compressive force

Max. assembling force

Weight

Short term

Long term

Short term

Long term

[N]

[g]

250

125

1,000

500

110

7.8

Dimensions [mm] Part number

+0.5

+0.3

+0.5

–0.5

–0.3

–0.5

+0.1

+0.5

+0.2

+0.3

Right-hand thread Left-hand thread

–0.1

–0.5

–0.2

–0.3

AGRM-08

13.0 M8 19.3 13.0 16.5 13.5 59.0 SW12 SW11 29.5 36.5 16.0

AGLM-08

delivery available time from stock

Min.

prices price list online www.igus.co.uk/en/agrm

598 Lifetime calculation, CAD files and much more support

Pivot angle

Min. Recom. Max.

18 °

25°

order Part number example AGRM-08 www.igus.co.uk/rod-end

NEW in this catalog! ®

igubal® rod ends

igubal Rod Ends | Product Range Axial joint: AGRM LC and AGLM LC

Order key

AG...M-06 LC Low-cost Dimension Metric Thread L = left-hand thread R = right-hand thread Axial joint

Dimensions as AGRM

S1 d4

page 983

Material: Housing: igumid G

LC (low-cost) version is a two piece assembly with either a plastic or metal stud Low weight Maintenance-free Plastic stud for lowest price, metal stud for highest load

S2 d2

Technical Data Part number

Max. static axial tensile force

Max. static axial compressive force

Short term

Long term

Short term

Long term

Weight

Right-hand thread

Left-hand thread

[N]

[g]

AGRM-06 LC

AGLM-06 LC

100

2,000

1,000

10.8

* MS = metal stud; e.g.: AGRM-06 LC MS

Dimensions [mm] Part number

+0.1

+0.5

+0.2

+0.3

Right-hand thread

Left-hand thread

–0.1

–0.5

–0.2

–0.3

AGRM-06 LC

AGLM-06 LC

10.0

delivery available time from stock

l6 Min.

+0.5

+0.3

+0.5

–0.5

–0.3

–0.5

e Min.

14.8 11.0 11.25 7.25 47.25 SW9 10.0 25.0 29.9 13.0

prices price list online www.igus.co.uk/en/agrm-lc

order Part number example AGRM-06 LC

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 599

igubal® rod ends

igubal® Rod Ends | Product Range

Adapter bolt: PKRM and PKLM d1

Order key

PK…M-06

Dimension Metric Thread L = left-hand thread R = right-hand thread Series K Adapter bolt

Material: POM page 984

Solid polymer bolts with a hexagonal head are an accessory to the series K rod ends. The plain shank fits into the inside diameter of the spherical ball and is secured by a circlip. The igubal® adapter bolts consist of highly shock-resistant, longfibre reinforced polymer POM.

Lightweight Excellent corrosion resistance Designed for use with K series rod ends High strength under impact loads Vibration-dampening Easy to fit Available in left- and right-hand threads

Technical Data and Dimensions [mm] Part number

Max. static Max. static tensile strength radial load

Right-h. thread Left-h. thread

PKRM-05 PKRM-06 PKRM-08 PKRM-10 PKRM-12 PKRM-14 PKRM-16 PKRM-18 PKRM-20

PKLM-05 PKLM-06 PKLM-08 PKLM-10 PKLM-12 PKLM-14 PKLM-16 PKLM-18 PKLM-20

Short term

Long term

Short term

Long term

[N]

100 150 250 500 700 800 900 800 500

50 75 125 250 350 400 450 400 250

delivery available time from stock

200 100 250 125 400 200 600 300 900 450 1,100 550 1,400 700 1,700 850 2,200 1,100

h11

Connection Total Length Thread Nut Thread length adjusting length width bolt

5 M05 6 M06 8 M08 10 M10 12 M12M 14 14M 16 16M 18 M18 x 1.5 20 M20 x 1.5

25.0 28.0 32.0 37.5 42.0 47.0 52.0 59.0 67.0

prices price list online www.igus.co.uk/en/pkrm

600 Lifetime calculation, CAD files and much more support

8.5 9.5 12.5 14.5 16.5 19.5 22.0 24.0 26.0

11.3 2.7 12.8 3.2 12.5 4.0 14.5 5.0 15.5 6.0 15.5 7.0 16.5 8.0 20.5 9.0 25.0 10.0

Weight

Width across flats

[g]

8 10 13 16 18 21 24 27 30

0.7 1.2 2.6 4 7.5 11.4 16.9 16.9 34.4

order Part number example PKRM-06 www.igus.co.uk/rod-end

igubal速 clevis joints

igubal速 Clevis Joints High tensile strength Vibration-dampening Noise-dampening Can be used in combination with series E rod ends Lightweight

601

igubal® clevis joints

igubal® Clevis Joints

igubal® clevis joints are all made of igumid G to DIN 71752, which can be used in combination with series E rod ends. Available components are clevis joint, clevis pin and clip or as an alternative, springloaded pin.

High tensile strength

Vibration-dampening

Noise-dampening Can be used in combination with series E rod ends

When to use it? If high stiffness is requested If corrosion resistance is required If no lubrication is to be used To save weight If maintenance-free, dry-running is required If simple assembly is to be realized In combination with pneumatic cylinders and gas pressure springs

When not to use it? If temperatures are higher than +200 °C If dimensions above 30 mm are necessary

Light weight

Temperature +80º

Product range 4 types Ø 4–20 mm

–30º

Standard

602

More information

www.igus.co.uk/clevis

igubal® Clevis Joints | Application Examples

igubal® clevis joints

Typical sectors of industry and application areas Food industry Packaging Heavy Duty Automotive Disposal engineering Automation etc.

Improve technology and reduce costs – 110 exciting examples online

www.igus.co.uk/igubal-applications

www.igus.co.uk/food

www.igus.co.uk//traffic

www.igus.co.uk/packaging

Pneumatic cylinder

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 603

igubal® clevis joints

igubal® Clevis Joints | Product Overview

GERM/GELM Series E metric

from page 606

GERMK/GELMK Series E metric

page 608

GERMF/GELMF Series E metric

page 609

GERMKE/GELMKE Series E metric

page 610

GERMFE/GELMFE Series E metric

page 611

GEFM – Spring-loaded pin; metric GBM – Clevis pin; metric GSR – Circlip; metric from page 612/613

NEW!*

GERM-DT GELM-DT

GEFM-DT

GERMF-DT GELMF-DT

Detectable spring-loaded pin

Detectable clevis joint from page 614

Detectable combination page 616

page 617

* in this catalog

604 Lifetime calculation, CAD files and much more support

www.igus.co.uk/clevis

My Sketches

igubal速 clevis joints

igus速 (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 605

igubal速 clevis joints

igubal速 Clevis Joints | Product Range

Clevis joint: GERM and GELM

Light weight High strength under impact loads Universal corrosion resistance High tensile strength Can be used in combination with series E rod ends Vibration-dampening Noise-dampening Available in left- (GELM) and right-hand-thread (GERM)

Technical Data Part number

Max. static tensile strength

Right-hand thread

Left-hand thread

GERM-04 M3.5 GERM-04 GERM-05 DIN M4 GERM-05 DIN M5 GERM-05 GERM-05 DIN M5 LS GERM-06 GERM-06 LS GERM-08 GERM-10 GERM-10 F GERM-12 GERM-12 F GERM-14 GERM-15 GERM-16 GERM-16 F GERM-17 GERM-17 F GERM-20 GERM-20 M20

GELM-04 M3.5 GELM-04 GELM-05 DIN M4 GELM-05 DIN M5 GELM-05 GELM-05 DIN M5 LS GELM-06 GELM-06 LS GELM-08 GELM-10 GELM-10 F GELM-12 GELM-12 F GELM-14 GELM-15 GELM-16 GELM-16 F GELM-17 GELM-17 F GELM-20 GELM-20 M20

Max. static radial load

Long term

Short term

Long term

Short term

Max. torque strength

[N]

[Nm]

[g]

650 650 1,000

325 325 500

250 250 250

125 125 125

0.4 0.4 0.4

0.9 0.9 1.5

1,000 1,200 1,000 1,400 1,400 2,700 4,700 4,700 5,700 5,700 6,600 3,200 7,500 7,500 3,600 3,600 9,500 9,500

500 600 500 700 700 1,350 2,350 2,350 2,850 2,850 3,300 1,600 3,750 3,750 1,800 1,800 4,750 4,750

250 250 130 300 130 650 800 800 900 900 1,000 1,000 1,200 1,200 1,200 1,200 3,000 3,000

125 125 65 150 65 325 400 400 450 450 500 500 600 600 600 600 1,500 1,500

0.5 0.5 0.5 1.5 1.5 5 15 6 20 15 25 25 30 27.5 30 27.5 60 80

1.5 2.7 2.3 2.5 3.6 6.3 13.2 13.2 20.2 20.2 29.9 30 49.9 49.9 50 50 105 105

606 Lifetime calculation, CAD files and much more support

Weight

www.igus.co.uk/en/germ

igubal® clevis joints

igubal® Clevis Joints | Product Range Clevis joint: GERM and GELM d1

Order key

90°

GE…M-04

Dimension Metric Thread design L = left-hand thread R = right-hand thread Dimensional series Clevis Material: Housing: igumid G

d2 d3

page 983

Dimensions [mm] Part number

h11

+0.3

B13

Thread tolerance 6H

+0.3

+0.5

+0.3

+0.2

–0.3

–0.5

–0.3

–0.2

Right-hand thread

Left-hand thread

GERM-04 M3.5

GELM-04 M3.5

M3.5

8.0

0.5

21.0

16.0

6.0

GERM-04 GERM-05 DIN M4 GERM-05 DIN M5 GERM-05 GERM-05 DIN M5 LS GERM-06 GERM-06 LS GERM-08 GERM-10 GERM-10 F GERM-12 GERM-12 F GERM-14 GERM-15 GERM-16 GERM-16 F GERM-17 GERM-17 F GERM-20 GERM-20 M20

GELM-04 GELM-05 DIN M4 GELM-05 DIN M5 GELM-05 GELM-05 DIN M5 LS GELM-06 GELM-06 LS GELM-08 GELM-10 GELM-10 F GELM-12 GELM-12 F GELM-14 GELM-15 GELM-16 GELM-16 F GELM-17 GELM-17 F GELM-20 GELM-20 M20

4 5 5 5 5

8 10 10 12 20

8 10 10 12 10

4 5 5 6 5

M04 M04 M05 M05 M05

8.0 9.0 9.0 10.0 9.0

0.5 0.5 0.5 0.5 0.5

21.0 25.0 25.0 30.6 36.0

16.0 20.0 20.0 24.0 30.0

6.0 7.5 7.5 9.0 7.5

6 6 8 10 10 12 12 14 15 16 16 17 17 20 20

12 24 16 20 20 24 24 28 28 32 32 32 32 40 40

12 12 16 20 20 24 24 27 27 32 32 32 32 40 40

6 6 8 10 10 12 12 14 14 16 16 16 16 20 20

M06 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M14 M16 M16 x 1.5 M16 M16 x 1.5 M20 x 1.5 M20 x 2.5

10.0 10.0 14.0 18.0 18.0 20.0 20.0 24.0 24.0 26.0 26.0 26.0 26.0 34.0 34.0

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0

30.6 43.0 41.6 51.3 51.3 61.3 61.3 71.3 71.3 81.9 81.9 83.0 83.0 105.0 105.0

24.0 36.0 32.0 40.0 40.0 48.0 48.0 56.0 56.0 64.0 64.0 64.0 64.0 80.0 80.0

9.0 9.0 12.0 15.0 15.0 18.0 18.0 22.5 22.5 24.0 24.0 24.0 24.0 30.0 30.0

delivery available time from stock

–0.16 –0.16

prices price list online www.igus.co.uk/en/germ

order part number example GERM-04

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 607

igubal® clevis joints

igubal® Clevis Joints | Product Range

Clavis joints with clevis pin and circlip: GERMK and GELMK

Order key

GE…MK-04 Dimension Clevis pin and circlip Metric Thread design L = left-hand thread R = right-hand thread Dimensional series Clevis joint

Light weight Universal corrosion resistance High tensile strength Can be used in combination with series E rod ends

Material: Housing: igumid G

page 983

Technical Data Part number

Max. static tensile strength

Max. static radial load

Weight

Long term

Short term

Long term

Short term

[N]

[g]

GELMK-04 M3.5

500

250

125

1.3

GELMK-04 GELMK-05 DIN M4 GELMK-05 DIN M5 GELMK-05 GELMK-05 DIN M5 LS GELMK-06 GELMK-06 LS GELMK-08 GELMK-10 GELMK-10 F GELMK-12 GELMK-12 F GELMK-14 GELMK-15 GELMK-16 GELMK-16 F GELMK-17 GELMK-17 F GELMK-20 GELMK-20 M20

500 800 800 900 800

250 400 400 450 400

250 250 250 250 130

125 125 125 125 65

1.3 2.1 2.1 3.3 2.9

1,300 1,300 2,100 3,000 3,000 3,500 3,500 6,100 2,800 7,000 7,000 3,600 3,600 9,000 9,000

650 650 1,050 1,500 1,500 1,750 1,750 3,050 1,400 3,500 3,500 1,800 1,800 4,500 4,500

300 130 650 800 800 900 900 1,000 1,000 1,200 1,200 1,200 1,200 3,000 3,000

150 65 325 400 400 450 450 500 500 600 600 600 600 1,500 1,500

3.3 4.4 7.9 16.4 16.4 25.3 25.3 31.2 38.9 60.8 60.8 62.3 62.3 125.2 125.2

Right-hand thread

Left-hand thread

GERMK-04 M3.5 GERMK-04 GERMK-05 DIN M4 GERMK-05 DIN M5 GERMK-05 GERMK-05 DIN M5 LS GERMK-06 GERMK-06 LS GERMK-08 GERMK-10 GERMK-10 F GERMK-12 GERMK-12 F GERMK-14 GERMK-15 GERMK-16 GERMK-16 F GERMK-17 GERMK-17 F GERMK-20 GERMK-20 M20

Single components: clevis pin GBM and circlip GSR page 613

608 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/germk

igubal® clevis joints

igubal® Clevis Joints | Product Range Clevis joints with spring-loaded pin: GERMF and GELMF

Order key

GE…MF-04 Dimension Spring-loaded pin Metric Thread design L = left-hand thread R = right-hand thread Dimensional series Clevis joint

Single piece design Easy to assemble Easy assembly also at hard to reach locations Can be used in combination with series E rod ends Corrosion-resistant and lightweight

Material: igumid G

page 983

Technical Data Part number

Max. static tensile strength

Right-hand thread

Left-hand thread

GERMF-04 M3.5 GERMF-04 GERMF-05 DIN M4 GERMF-05 DIN M5 GERMF-05 DIN M5 LS GERMF-05 GERMF-06 GERMF-06 LS GERMF-08 GERMF-10 GERMF-10 F GERMF-12 GERMF-12 F GERMF-16 GERMF-16 F

GELMF-04 M3.5 GELMF-04 GELMF-05 DIN M4 GELMF-05 DIN M5 GELMF-05 DIN M5 LS GELMF-05 GELMF-06 GELMF-06 LS GELMF-08 GELMF-10 GELMF-10 F GELMF-12 GELMF-12 F GELMF-16 GELMF-16 F

Max. static radial load

Weight

Long term

Short term

Long term

Short term

[N]

[g]

500 500 800 800 800 900 1,300 1,300 2,100 3,000 3,000 3,500 3,500 7,000 7,000

250 250 400 400 400 450 650 650 1,050 1,500 1,500 1,750 1,750 3,500 3,500

250 250 250 250 250 250 300 130 650 800 800 900 900 1,200 1,200

125 125 125 125 125 125 150 65 325 400 400 450 450 600 600

1.3 1.3 2.3 2.3 2.3 3.8 3.9 3.9 9.1 18.2 18.2 28.6 28.6 61.8 61.8

Single components: spring-loaded pins GEFM page 612

delivery available time from stock

prices price list online www.igus.co.uk/en/germf

order part number example GERMF-04

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 609

igubal® clevis joints

igubal® Clevis Joints | Product Range

Clevis joints combination: GERMKE and GELMKE

Order key

GE…MKE-05 Dimension With clevis pin, circlip and rod end Metric Thread design L = left-hand thread R = right-hand thread Dimensional series Clevis joint

Light weight Universal corrosion resistance High tensile strength Can be used in combination with series E rod ends

Material: igumid G

page 983

Technical Data Part number

Max. static tensile strength

Max. static radial load

Weight

Long term

Short term

Long term

Short term

[N]

[g]

Right-hand thread

Left-hand thread

GERMKE-05 GERMKE-06 GERMKE-08 GERMKE-10

GELMKE-05 GELMKE-06 GELMKE-08 GELMKE-10

900 1,300 2,000

450 650 1,000

150 200 450

75 100 225

6.4 7.3 14.6

2,300

1,150

500

250

27.1

GERMKE-10 F

GELMKE-10 F

2,300

1,150

500

250

27.1

GERMKE-12 GERMKE-12 F GERMKE-15 GERMKE-16 GERMKE-16 F GERMKE-17 GERMKE-17 F GERMKE-20 GERMKE-20 M20

GELMKE-12 GELMKE-12 F GELMKE-15 GELMKE-16 GELMKE-16 F GELMKE-17 GELMKE-17 F GELMKE-20 GELMKE-20 M20

3,300 3,300 2,800 5,000 5,000 3,600 3,600 7,200 7,200

1,650 1,650 1,400 2,500 2,500 1,800 1,800 3,600 3600

550 550 800 850 850 1,100 1,100 1,800 1800

275 275 400 425 425 550 550 900 900

42.7 42.7 68.4 86.9 86.9 98.3 98.3 175.2 175,2

Cleve joints with spring-loaded pin, can be used in combination with series E rod ends.

delivery available time from stock

prices price list online www.igus.co.uk/en/germke

610 Lifetime calculation, CAD files and much more support

order part number example GERMKE-05 www.igus.co.uk/en/germke

igubal® clevis joints

igubal® Clevis Joints | Product Range Clevis joints combination: GERMFE and GELMFE

Order key

GE…MFE-05 Dimension With spring-loaded pin and rod end Metric Thread design L = left-hand thread R = right-hand thread Dimensional series Clevis joint Material: igumid G

page 983

Technical Data Part number

Max. static tensile strength

Max. static radial load

Long term

Short term

Long term

Short term

Weight

Right-hand thread

Left-hand thread

[N]

[g]

GERMFE-05 GERMFE-06 GERMFE-08 GERMFE-10 GERMFE-10 F GERMFE-12 GERMFE-12 F GERMFE-16 GERMFE-16 F

GELMFE-05 GELMFE-06 GELMFE-08 GELMFE-10 GELMFE-10 F GELMFE-12 GELMFE-12 F GELMFE-16 GELMFE-16 F

900 1,300 2,000

450 650 1,000

150 200 450

75 100 225

7 7.9 15.9

2,300 2,300 3,300 3,300 5,000 5,000

1,150 1,150 1,650 1,650 2,500 2,500

500 500 550 550 850 850

250 250 275 275 425 425

29.2 29.2 46 46 94.4 94.4

Cleve joints with spring-loaded pin, can be used in combination with series E rod ends.

delivery available time from stock

prices price list online www.igus.co.uk/en/germfe

order part number example GERMFE-05

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 611

igubal® clevis joints

igubal® Clevis Joints | Product Range

Spring-loaded pin: GEFM l3

b a

Material: igumid G

page 983

l2 l1

Dimensions [mm] Part number

h11

±0.5

Weight [g]

GEFM-04

9.5

10.5

4.5

0.5

GEFM-05 DIN GEFM-05 DIN M5 LS GEFM-05 GEFM-06 LS GEFM-06 GEFM-08 GEFM-10 GEFM-12 GEFM-16

5 5 5 6 6

9 9 10 10 10

12 12 14 14 14

13.5 13.5 15.5 15.5 15.5

8 8 8 8 8

23 33 27 39 27

19 29 23 35 23

5.5 5.5 6.5 6.5 6.5

0.8 1 1.1 1 1.2

8 10 12 16

14 18 20 26

19 23 28 36

21.0 25.5 31.0 40.0

11 14 16 22

35.5 45 53 73

30 38 45 62

8.0 10.0 12.0 16.0

2.8 5 8.3 18.3

delivery available time from stock

prices price list online www.igus.co.uk/en/gefm

612 Lifetime calculation, CAD files and much more support

order part number example GEFM-04 www.igus.co.uk/en/gefm

igubal速 clevis joints

igubal速 Clevis Joints | Product Range Clevis pin: GBM l d

d2 d1

Material: igumid G

page 983

Dimensions [mm] Part number

Clip

Weight

h11

[g]

GBM-04

3.2

12.5

1.05

GSR-04

0.3

GBM-05 GBM-05 DIN GBM-06

5 5 6 8 10

4 4 4 5 7

8 8 9 12 15

16.5 14.5 16.5 21.5 27

12 10 12 16 20

1.15 1.15 1.15 1.15 1.35

GSR-06 GSR-06 GSR-06 GSR-08 GSR-10

0.5 0.5 0.7 1.5 3

12 14 15 16 17 20

9 12 12 12 12 15

18 22 23 24 25 30

31.5 36 36 42 42 51

24 27 27 32 32 40

1.5 1.7 1.7 1.7 1.7 2.0

GSR-12 GSR-16 GSR-16 GSR-16 GSR-16 GSR-20

4.8 5.7 8.3 10.4 12.3 19.2

GBM-08 GBM-10 GBM-12 GBM-14 GBM-15 GBM-16 GBM-17 GBM-20

Circlip: GSR

b d1 d2

Material: POM page 984

Dimensions [mm] Part number

Weight

GSR-04

3.2

0.05

GSR-06 GSR-08 GSR-10 GSR-12 GSR-16 GSR-20

4 5 7 9 12 15

9 11 14 18.5 23 28

1.1 1.1 1.3 1.4 1.6 1.9

0.06 0.12 0.16 0.31 0.58 0.96

[g]

delivery available time from stock

prices price list online www.igus.co.uk/en/gbm

order part number example GBM-04

igus速 (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 613

igubal速 clevis joints

NEW in this catalog! 速

igubal Clevis Joints | Product Range

Cleve joint, detectable: GERM-DT and GELM-DT

Detectable Insensitive to dust and dirt Maintenance-free, dry-running Vibration-dampening Light weight

Technical Data Part number

Max. static tensile strength

Right-hand thread

Left-hand thread

GERM-04-DT GERM-05-DT GERM-06-DT GERM-08-DT GERM-10-DT GERM-10-DT F GERM-12 DT GERM-12 DT F

GELM-04-DT GELM-05-DT GELM-06-DT GELM-08-DT GELM-10-DT GELM-10-DT F GELM-12 DT GELM-12 DT F

delivery available time from stock

Max. static radial load

Weight

Long term

Short term

Long term

Short term

[N]

[g]

455 840 980 1,890 3,290 3,290 3,990 3,990

227.5 420 490 945 1,645 1,645 1,995 1,995

175 175 210 455 560 560 630 630

87.5 87.5 105 227.5 280 280 315 315

0.9 2.7 2.5 6.3 13.2 13.2 20.2 20.2

prices price list online www.igus.co.uk/clevis

614 Lifetime calculation, CAD files and much more support

order part number example GERM-04-DT www.igus.co.uk/clevis

NEW in this catalog! ®

igubal® clevis joints

igubal Clevis Joints | Product Range Cleve joint, detectable: GERM-DT and GELM-DT d1

Order key

90°

GE…M-04-DT

Detectable Dimension Metric Thread design L = left-hand thread R = right-hand thread Dimensional series Clevis joint

d2 d3

Material: RN246 page 985

Dimensions [mm] Part number

d1 H9

g h11

+0.3

–0.16

B13

Thread tolerance 6H

+0.3

+0.5

+0.3

+0.2

–0.3

–0.5

–0.3

–0.2

Right-hand thread

Left-hand thread

GERM-04-DT

GELM-04-DT

8.0

0.5

21.0 16.0

6.0

GERM-05-DT GERM-06-DT GERM-08-DT GERM-10-DT GERM-10-DT F GERM-12 DT GERM-12 DT F

GELM-05-DT GELM-06-DT GELM-08-DT GELM-10-DT GELM-10-DT F GELM-12 DT GELM-12 DT F

5 6 8 10 10 12 12

12 12 16 20 20 24 24

6 6 8 10 10 12 12

M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25

10.0 10.0 14.0 18.0 18.0 20.0 20.0

0.5 0.5 0.5 0.5 0.5 0.5 0.5

30.6 30.6 41.6 51.3 51.3 61.3 61.3

9.0 9.0 12.0 15.0 15.0 18.0 18.0

delivery available time from stock

prices price list online www.igus.co.uk/clevis

24.0 24.0 32.0 40.0 40.0 48.0 48.0

order part number example GERM-04-DT

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 615

igubal® clevis joints

NEW in this catalog! ®

l3 d1 igubal Clevis Joints | Product Range

b a

Spring-loaded pin, detectable: GEFM-DT d1

b ca

Order key

GEFM-04-DT

l2 l1 d1

Detectable Insensitive to dust and dirt Maintenance-free, dry-running Vibration-dampening Light weight

b a

l2 l1

Detectable Dimension Metric Spring-loaded pin Series Clevis joint

l2 l1

Material: RN246 page 985

Dimensions [mm] Part number

h11

±0.5

Weight [g]

GEFM-04-DT

9.5

10.5

4.5

0.5

GEFM-05-DT GEFM-06-DT GEFM-08-DT GEFM-10-DT GEFM-12-DT

5 6 8 10 12

10 10 14 18 20

14 14 19 23 28

15.5 15.5 21.0 25.5 31.0

8 8 11 14 16

27 27 35.5 45 53

23 23 30 38 45

6.5 6.5 8.0 10 12.0

1.1 1.2 2.8 5 8.3

delivery available time from stock

prices price list online www.igus.co.uk/clevis

616 Lifetime calculation, CAD files and much more support

order part number example GEFM-04-DT www.igus.co.uk/clevis

NEW in this catalog! ®

igubal® clevis joints

igubal Clevis Joints | Product Range Cleve joint with spring-loaded pin, detectable: GERMF-DT

Order key

GE…MF-04-DT Detectable Dimension Spring-loaded pin Metric Thread design L = left-hand thread R = right-hand thread Dimensional series Clevis joint

Detectable Insensitive to dust and dirt Maintenance-free, dry-running Vibration-dampening Light weight

Material: RN246 page 985

Technical Data Part number

Max. static tensile strength

Max. static radial load

Long term

Short term

Long term

Short term

Weight

Right-hand thread

Left-hand thread

[N]

[g]

GERMF-04-DT

GELMF-04-DT

350

175

87.5

1.3

GERMF-05-DT

GELMF-05-DT

630

315

175

87.5

3.8

GERMF-06-DT GERMF-08-DT GERMF-10-DT GERMF-10-DT F GERMF-12-DT GERMF-12-DT F

GELMF-06-DT GELMF-08-DT GELMF-10-DT GELMF-10-DT F GELMF-12-DT GELMF-12-DT F

910 1,470 2,100 2,100 2,450 2,450

455 735 1,050 1,050 1,225 1,225

210 455 560 560 630 630

105 227.5 280 280 315 315

3.9 9.1 18.2 18.2 28.6 28.6

Single components: cleve joint GERM-DT and spring-loaded pin GEFM-DT pages 614 and 616

delivery available time from stock

prices price list online www.igus.co.uk/clevis

order part number example GERMF-04-DT

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 617

igubal速 clevis joints

My Sketches

618 Lifetime calculation, CAD files and much more support

www.igus.co.uk/clevis

igubal速 pillow block bearings

igubal速 Pillow Block Bearings Maintenance-free, dry-running High tensile strength High endurance strength Lubrication-free Chemical-resistant High radial loads

619

igubal® pillow block bearings

igubal® Pillow Block Bearings

igubal® pillow block bearings are bearing units especially easy to install and which are able to compensate alignment errors and prevent edge loads.

Maintenance-free, dry-running High stiffness

When to use it? If chemical resistance is required If a cost-effective option is requested If you need dirt-resistant bearings To adjust misalignment If you need splitting components

High strength

When not to use it? If temperatures are higher than +80 °C If an integrated fixing collar is required If dimensions above 50 mm are necessary If rotation speeds higher than 0,5 m/s are required Maintenance-free, self-lubricating Can be used in liquid media High radial loads

Temperature +80º

Product Range 6 types Ø 5–50 mm

–30º

620

More information

www.igus.co.uk/pillow-block

igubal® Pillow Block Bearings | Application Examples

igubal® pillow block bearings

Typical sectors of industry and application areas Plant construction Machine building Packaging etc.

Improve technology and reduce costs – 110 exciting examples online

www.igus.co.uk/igubalPraxis

Stone processing

www.igus.co.uk/solar

Paper industry

www.igus-packaging.eu

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 621

igubal® pillow block bearings

igubal® Pillow Block Bearings | Technical Data

Advantages Maintenance-free, dry running High stiffness High strength under impact loads Compensation for alignment errors Compensation for edge loads Corrosion-free Chemically resistant Vibration damping Suitable for rotating, oscillating and linear movements Light weight High radial loads Can be used in liquid media Space-saving design Easy to install Predictable lifetime Maintenance-free, lubrication-free

Areas of Application The ability to pivot allows igubal® pillow block bearings to compensate for misalignment and possible shaft deflection. Applications in which these effects cannot be prevented are suitable for igubal® pillow block bearings.

Tolerances Maintenance-free igubal ® pillow block bearings are designed with an inside diameter tolerance of E10. The shaft should be made to tolerance class h6 to h9. These recommended tolerances allow for changes in the bearing due to temperature.

Fitting igubal® pillow block bearings are designed for mounting with 2 bolts. Precision mounting of the bearing is not necessary, since the spherical ball compensates for alignment errors.

Product Range igubal ® pillow block bearings can be supplied in the standard dimensions for shafts of 5 to 50 mm.

Pivot angle

622 Lifetime calculation, CAD files and much more support

www.igus.co.uk/pillow-block

igubal速 Pillow Block Bearings | Product Overview

KSTM/KSTI Series K metric/inches page 624

igubal速 pillow block bearings

KSTM-GT Series K metric

page 626

NEW!*

ESTM

Series E metric page 627

ESTM-GT

ESTM-SL

page 628

page 629

Series E metric

NEW!*

AD-01-ESTM

Adapter for series E metric page 630

* in this catalog

igus速 (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 623

igubal速 pillow block bearings

igubal速 Pillow Block Bearing | Product Range

Pillow block bearing KSTM and KSTI

Maintenance-free, dry-running High stiffness High strength under impact loads Compensation of misalignment and edge loads Corrosion- and chemical-resistant High vibration-dampening Suitable for rotating, oscillating and linear movements Light weight

Material: Housing: igumid G page 983 Spherical ball: iglidur速 W300 page 671

Technical Data Part number

Short term

Max. static tensile strenght Long term

Max. axial static compressive strength

Max. torque

Weight

for longitudinal

[N]

[Nm]

[g]

KSTM-05

700

350

300

0.6

1.7

KSTM-06 KSTM-08 KSTM-10 KSTM-12 KSTM-14 KSTM-16 KSTM-18 KSTM-20 KSTM-22 KSTM-25 KSTM-30

1,100 1,300 1,500 2,200 2,400 3,000 3,500 4,700 6,100 6,600 8,100

550 650 750 1,100 1,200 1,500 1,750 2,350 3,050 3,300 4,050

300 400 500 600 600 1,800 1,200 1,300 1,400 1,600 2,100

1.3 1.3 2.5 2.5 4.5 4.5 10.5 10.5 10.5 10.5 21.5

2.9 4.6 8.6 11.8 18.4 23.7 32.2 40 54 75.3 116.8

Max. torque

Weight

Technical Data Part number

Short term

Long term

Max. axial static compressive strength

for longitudinal

[N]

[Nm]

[g]

KSTI-03

550

275

300

0.6

1.7

KSTI-04 KSTI-05 KSTI-06 KSTI-07 KSTI-08

600 800 1,000 1,100 1,200 2,100 3,100 5,400

300 400 500 550 600 1,050 1,550 2,700

300 400 500 600 600 800 1,200 1,600

0.6 0.8 1.3 2.5 2.5 2.5 4.5 10.5

2.8 4.5 7.5 9.7 13.5 21.5 33.4 85.8

KSTI-10 KSTI-12 KSTI-16

Max. static tensile strenght

The maximum torques for longitudinal holes correspond to the permissible torque of the fixing screws (fixing category 5.8).

624 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/kstm

igubal® pillow block bearings

igubal® Pillow Block Bearing | Product Range Pillow block bearing KSTM and KSTI d1

Order key

h1 h3

KSTM-05 Dimension Metric Pillow block bearing Series

m a

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [mm] Part number

Max. pivot angle

E10

KSTM-05

6.0

3.3

30°

KSTM-06 KSTM-08 KSTM-10 KSTM-12 KSTM-14 KSTM-16 KSTM-18 KSTM-20 KSTM-22 KSTM-25 KSTM-30

43 47 62 65 82

6 8 10 12 14

9 12 14 16 19

7.0 9.0 10.5 12.0 13.5

10 10 14 14 18

18 20 26 28 34

33 33 46 46 60

5.5 6 7.5 8.5 9.5

4.5 4.5 5.5 5.5 6.6

6 7 8 9 11

29° 25° 25° 25° 23°

86 93 98 108 124 139

16 18 20 22 25 30

21 23 25 28 31 37

15.0 16.5 18.0 20.0 22.0 25.0

18 22 22 24 27 32

36 42 44 48 54 64

60 68 68 74 86 96

10.5 11.5 13 14 16 17

6.6 9.0 9.0 9.0 9.0 11.0

12 13 14 16 17 20

23° 23° 23° 22° 22° 22°

Max. pivot angle

Dimensions [Inch] Part number

E10

KSTI-03

1.4000

.1900

.312

.234

.290

.566

1.000

.165

.137

.200

25º

KSTI-04 KSTI-05 KSTI-06 KSTI-07 KSTI-08 KSTI-10 KSTI-12 KSTI-16

1.7500 1.9500 2.4000 2.5000 2.8000

.2500 3125 .3750 .4375 .5000

.375 .437 .500 .562 .625

.250 .312 .359 .406 .453

.390 .430 .550 .570 .600

.705 .824 1.022 1.082 1.191

1.250 1.350 1.800 1.850 2.000

.205 .236 .376 .315 .354

.137 .150 .180 .205 .205

.250 .280 .300 .330 .380

25º 25º 22º 22º 22º

3.3500 .6250 3.7500 .7500 5.0000 1.0000

.750 .875 1.375

.484 .593 1.005

.700 .860 1.100

1.409 1.687 2.163

2.300 2.700 3.500

.413 .472 .630

.205 .270 .520

.470 .530 .680

22º 22º 20º

delivery available time from stock

prices price list online www.igus.co.uk/en/kstm

order part number example KSTM-05

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 625

igubal® pillow block bearings

igubal® Pillow Block Bearing | Product Range

Pillow block bearing with split housing: KSTM-GT m

B C1

Order key

KSTM-GT40-GT a

0 E1

Split ball Inner diameter Split pillow block Metric Pillow block bearing Series

h h1

d3 (2x)

C1 B

Fitting is easy and does not require shaft removal Maintenance-free, dry-running For high static loads Space- and weight-saving design High stiffness Predictable lifetime

Material: Housing: RN33 page 984 Spherical ball: iglidur® J page 674

Technical Data Part number

Max. radial tensile strength Short term

Long term

Max. axial tensile strength Short term

Max. torque through ball fixing holes

Weight

Long term

[N]

[Nm]

[g]

KSTM-GT35*

11,000

5,500

2,500

1,250

250.3

KSTM-GT40 KSTM-GT40-GT** KSTM-GT45* KSTM-GT50 KSTM-GT50-GT**

11,000 11,000 15,000 15,000 15,000

5,500 5,500 7,500 7,500 7,500

2,500 2,500 3,000 3,000 3,000

1,250 1,250 1,500 1,500 1,500

20 20 20 20 20

15 15 20 20 20

228.4 235 405.2 370.5 389.2

Dimensions [mm] Part number

Max. pivot angle

E10

KSTM-GT35*

35.0

13.5

79.0

39.5

12.6

19.0

120.5

91.0

29.5

48.5

24°

KSTM-GT40 KSTM-GT40-GT** KSTM-GT45* KSTM-GT50 KSTM-GT50-GT**

40.0 40.0 45.0 50.0 50.0

13.5 13.5 13.5 13.5 13.5

79.0 79.0 100.0 100.0 100.0

39.5 39.5 50.0 50.0 50.0

12.6 12.6 12.6 12.6 12.6

19.0 19.0 19.0 19.0 19.0

120.5 120.5 149.0 149.0 149.0

91.0 91.0 114.0 114.0 114.0

29.5 29.5 35.0 35.0 35.0

48.5 48.5 60.0 60.0 60.0

24° 24° 24° 24° 24°

* Diameter given by iglidur® J bore reducer ** Split pillow block with split ball

delivery available time from stock

prices price list online www.igus.co.uk/en/kstm-gt

626 Lifetime calculation, CAD files and much more support

order part number example KSTM-GT35 www.igus.co.uk/en/kstm-gt

igubal® pillow block bearings

igubal® Pillow Block Bearing | Product Range Pillow block bearing ESTM h

B B

A A B

R1 R 1

C1 C1

A A

Order key

ESTM-08

B B

Dimension Metric Pillow block bearing Series

h2 h2

C1 d2

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671 Maintenance-free, self-lubricating Adapter available page 630

High radial loads Can be used in liquid media Space-saving design Easy to install Predictable lifetime

Max. radial tensile strength h2

Part number

Technical Data Max. radial compressive strength

Max. axial strength

Max. torque fixing holes

Weight

Short term

Long term

Short term

Long term

Short term

Long term

[N]

[Nm]

[g]

ESTM-08

2,500

1,250

4,300

2,150

600

300

1.3

ESTM-10 ESTM-12 ESTM-16 ESTM-20 ESTM-25 ESTM-30*

3,400 4,500 6,700 8,500 13,500 10,000

1,700 2,250 3,350 4,250 6,750 5,000

5,300 6,500 8,500 11,000 18,500 16,500

2,650 3,250 4,250 5,750 9,250 8,250

700 750 1,100 1,400 2,300 2,500

350 375 550 700 1,150 1,250

2.5 2.5 4.5 4.5 10.5 10.5

7.1 9 17.5 27.4 50.8 79.7

* Due to the different manufacturing method, the load values are lower

Dimensions [mm] Part number

Max. pivot angle

ESTM-08

8.0

4.5

–

9.5

–

31.0

22.0

9.0

8.0

4.5

22°

ESTM-10 ESTM-12 ESTM-16 ESTM-20 ESTM-25 ESTM-30

10.0 12.0 16.0 20.0 25.0 30.0

5.5 5.5 6.6 9.0 9.0 11.0

– – 10.6 14.0 14.0 17.0

22 26 34.0 40.0 48.0 56.0

11 13 17.0 20.0 24.0 28.0

– – 6.4 8.6 8.6 10.6

36.0 38.0 50.0 62.0 72.0 86.0

26.0 28.0 37.0 46.0 54.0 64.0

10.0 10.0 13.0 16.0 18.0 22.0

9.0 10.0 13.0 16.0 20.0 22.0

5.0 5.0 6.5 8.0 9.0 11.0

22° 22° 22° 22° 20° 20°

delivery available time from stock

prices price list online www.igus.co.uk/en/estm

order part number example ESTM-08

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 627

1 R

NEW in this catalog!! ®

igubal Pillow Block Bearing | Product Range

Pillow block bearing with split housing and split ball: ESTM-GT…-GT a

h h1

Order key B

d2 B

1 R

Split ball Dimension Split Metric Pillow block bearing Series

ESTM-GT16-GT

1 R

igubal® pillow block bearings

h1 h

Save time during assembly and disassembly of shafts, no more threading Low installation space and low weight High stiffening and fatigue strength Spherical ball material iglidur® J for low moisture absorption Ideal for outdoor use Adapter available page 630

Material: Housing: RN33 page 984 Spherical ball: iglidur® J page 674

Technical Data Part number

Max. static tensile strength

Max. static axial compressive strength

Weight

Short term

Long term

Short term

Long term

[N]

[g]

ESTM-GT16-GT

2,500

1,250

4,000

2,000

ESTM-GT20-GT ESTM-GT25-GT ESTM-GT30-GT

3,500 5,000 5,000

1,750 2,500 2,750

6,000 3,500 5,000

3,000 3,500 5,000

28 52 84

Dimensions [mm] Part number

Max. pivot angle

E10

ESTM-GT16-GT

16.0

10.6

34.0

17.0

6.4

50.0

37.0

13.0

6.5

22°

ESTM-GT20-GT ESTM-GT25-GT ESTM-GT30-GT

20.0 25.0 30.0

14.0 14.0 17.0

40.0 48.0 56.0

20.0 24.0 28.0

8.6 8.6 10.6

62.0 72.0 86.0

46.0 54.0 64.0

16.0 18.0 22.0

16.0 20.0 22.0

8.0 9.0 11.0

22° 22° 22°

delivery available time from stock

prices price list online www.igus.co.uk/en/estm-gt

628 Lifetime calculation, CAD files and much more support

order part number example ESTM-GT16-GT www.igus.co.uk/en/estm-gt

igubal® pillow block bearings

igubal® Pillow Block Bearing | Product Range h1

Pillow block bearing slimline:B ESTM SL d1 h

Order key

ESTM-05 SL Slimline Dimension Metric Pillow block bearing Series

d2 m a h1

A C1

Light weight Extremly space saving Low-cost Predictable lifetime d2 Maintenance- and lubricant-free m With M3 thread, e. g. ESTM-10-SL-M3a For spax screw with outer diameter 3.5 mm

Material: Housing: igumid G page 983 Spherical ball: iglidur® J page 674 h2

B d1

Technical Data Part number

Max. radial tensile strength

Max. radial compressive strength

Max. lateral strength

Max. axial strength

Weight

Short term

Long term

Short term

Long term

Short term

Long term

Short term

Long term

[N]

[g]

ESTM-05 SL

1,500

750

1,400

700

900

450

150

1.6

ESTM-06 SL ESTM-08 SL ESTM-10 SL

1,500 1,600 1,600

750 800 800

1,400 1,400 1,400

700 700 700

900 950 1,000

450 475 500

150 100 100

75 50 50

1.7 1.7 1.9

Dimensions [mm] Part number

Max. pivot angle

H10

ESTM-05 SL

5.0

2.5

18.0

10.0

6.5

16.0

10.0

6.0

17°

ESTM-06 SL ESTM-08 SL ESTM-10 SL

6.0 8.0 10.0

2.5 2.5 2.5

18.0 19.0 20.0

10.0 10.0 10.0

6.5 6.5 6.5

16.0 18.0 20.0

10.0 12.0 14.0

6.0 6.0 6.0

17° 17° 17°

delivery available time from stock

prices price list online www.igus.co.uk/en/estm-sl

order part number example ESTM-05 SL

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 629

igubal® pillow block bearings

NEW in this catalog!! ®

igubal Pillow Block Bearings | Product Range

Adapter for pillow block bearings of series E

Order key

AD-01-ESTM-20 L

Dimension Metric Pillow block bearing Series Adapter

H1 H1

ØMx

R a

a N1

Same depth gauge as metal pillow blocks Light weight For pillow block bearings of series E (ESTM, ESTM-GT) Corrosion- and chemical-resistant Fits directly Space-saving

Technical Data Part number

Max. radial tensile strength [Fz]

Max. radial compressive strength [Fd]

lateral strength [Fs]

Max. axial Weight strength [Fa] (Tension/pression)

Short term

Long term

Short term

Long term

Short term

Long term

Short term

Long term

[N]

[g]

2,400 2,400 2,400

1,200 1,200 1,200

10,000 10,000 10,000

5,000 5,000 5,000

3,000 3,000 3,000

1,500 1,500 1,500

1,200 1,200 1,200

600 600 600

29.8 74 124

AD-01-ESTM-20* AD-01-ESTM-25** AD-01-ESTM-30**

Dimension [mm] Part number

for ESTM-…

AD-01-ESTM-20* ESTM-20

130

AD-01-ESTM-25** ESTM-25 AD-01-ESTM-30** ESTM-30

25 30

130 158

20 25

10 12.5

102 118

12.5 14.9

11 14

9 10

54 64

M8 M10

* Material: plastic ** Material: aluminum

delivery available time from stock

prices price list online www.igus.co.uk/en/ad-01-estm

630 Lifetime calculation, CAD files and much more support

order part number example AD-01-ESTM-20 www.igus.co.uk/pillow-block

igubal速 flange bearings

igubal速 Flange Bearings Maintenance-free, dry-running High tensile strength High endurance strength Compensation of alignment errors Compensation of edge loads Light weight

631

igubal® flange bearings

igubal® Flange Bearings

igubal® flange bearings have been developped for the support of shaft ends or for shafts lead-through. Like all igubal® products, these bearings consist of an igumid G housing and an iglidur® W300 spherical ball. igubal® flange bearings are made to the di mensional series E and are offered with two or four mounting holes.

Maintenance-free, dry-running

High stiffness

When to use it? If chemical resistance is required If a cost-effective option is requested If you need dirt-resistant bearings To adjust misalignment If you need splitting components

High strength under impact loads When not to use it? If temperatures are higher than +200 °C HT Version, page 641 If an integrated fixing collar is required If dimensions above 50 mm are necessary If rotation speeds higher than 0.5 m/s are required

Temperature +80º

+200º

–30º

–40º

Standard

632

Product Range 5 types Ø 4–50 mm

High temperature

More information

www.igus.co.uk/igubal-flange

igubal® Flange Bearings | Application Examples

igubal® flange bearings

Typical sectors of industry and application areas Plant construction Automation Agricultural machines Machine building Food industry etc.

Improve technology and reduce costs – 110 exciting examples online

www.igus.co.uk/igubal-applications

Conveyor technique

www.igus.co.uk/rotary-sorter

www.igus.co.uk/agrar

www.igus.co.uk/food

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 633

igubal® flange bearings

igubal® Flange Bearings | Technical Data

General Properties igubal® Flange bearings have been developped for the support of shaft ends or for shafts lead-through. Like all igubal® products, these bearings consist of an igumid G housing and an iglidur® W300 spherical ball. igubal® flange bearings are made to the di mensional series E and are offered with two or four mounting holes.

Areas of Application Since igubal® flange bearings are made for maintenancefree use, they are especially suitable for applications in which access to the bearing is limited, in moist or wet environments or clean room environments. igubal® flange bearings are also found in electric brushes, awnings, conveyor technology, and bakery machines.

Installation igubal® flange bearings are designed for mounting with 2 or 4 bolts, depending on the design. The 2-hole types are provided with elongated holes, which allow easy and flexible installation. An exact positioning of the bearing housing is not necessary, since the flange bearing compensates for alignment errors.

Pivot angle

634 Lifetime calculation, CAD files and much more support

www.igus.co.uk/igubal-flange

igubal速 Flange Bearings | Product Overview

EFOM Series E metric

from page 636

EFSM

Series E metric from page 638

EFOM-HT

EFSM-HT

page 641

page 642

Series E metric

igubal速 flange bearings

KFSM-GT Series K metric

page 640

Series E metric

igus速 (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 635

igubal® flange bearings

igubal® Flange Bearings | Product Range

Flange bearing with 2 mounting holes: EFOM

iglidur® W300 highly wear resistant spherical ball Easy to install Compensation of misalignment errors Corrosion-resistance Light weight Maintenance-free, self-lubricating

Technical Data Part number

Maximum static axial load

Maximum static radial load

Maximum static torque

Max. pivot angle

Weight

Short term

Long term

Short term

Long term

Holes

[N]

[Nm]

EFOM-04

400

200

750

375

0.6

28°

1.9

EFOM-05 EFOM-06 EFOM-08 EFOM-10 EFOM-12 EFOM-15 EFOM-16 EFOM-17 EFOM-20 EFOM-25 EFOM-30

400 500 700 850 1,100

200 250 350 425 550

750 800 1,100 2,000 2,200

375 400 550 1,000 1,100

0.6 0.6 1.3 2.5 2.5

29° 25° 25° 25° 21°

2.3 1.8 4.1 6.8 8.9

1,300 1,400 1,800 1,800 3,000 3,500

650 700 900 900 1,500 1,750

2,400 2,800 3,200 5,500 6,000 6,500

1,200 1,400 1,600 2,750 3,000 3,250

4.5 4.5 4.5 10.5 10.5 21.5

20° 27° 21° 19° 15° 14°

15 17.7 24.9 32.8 58.5 78.9

Spherical ball material to choose J4VEM: clearance-free

[g]

page 667 JEM: low moisture absorption

REM: low-cost

636 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/efom

igubal® flange bearings

igubal® Flange Bearings | Product Range dB d1

Order key

EFOM-04 Inner diameter Metric 2 holes Flange bearing Series

J H

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [mm] Part number

E10

Size

Width

Hole pitch ±0.1

Height of plate

Height total

Bore diameter dxl

EFOM-04

14.0

33.8

16.0

24.0

4.5

8.5

3.2 x 5.0

EFOM-05 EFOM-06 EFOM-08 EFOM-10 EFOM-12 EFOM-15 EFOM-16 EFOM-17 EFOM-20 EFOM-25 EFOM-30

5 6 8 10 12

14.0 14.0 18.0 22.2 25.0

33.8 33.8 44.2 52.0 56.7

16.0 16.0 22.0 26.0 31.0

24.0 24.0 31.0 36.0 41.0

4.5 4.5 5.5 6.5 7.0

8.5 8.5 10.5 12.0 13.0

3.2 x 5.0 3.2 x 5.5 4.3 x 6.5 5.3 x 8.0 5.3 x 8.0

15 16 17 20 25 30

29.8 32.0 34.8 40.0 48.5 55.0

68.6 72.6 74.6 89.0 101.0 118.0

36.0 38.0 41.0 47.0 58.5 65.0

50.0 53.0 55.0 65.0 75.0 87.5

8.5 10.0 10.0 11.0 14.0 15.0

15.5 17.5 18.0 20.0 25.0 26.0

6.4 x 10.0 6.4 x 10.1 6.4 x 10.2 8.4 x 12.5 8.4 x 12.6 10.5 x 16.0

To apply to following standard tolerances: from 0,5 to 6 mm: ±0.1 mm over 6 to 30 mm: ±0.2 mm over 30 to 120 mm: ±0.3 mm

delivery available time from stock

prices price list online www.igus.co.uk/en/efom

order Part number example EFOM-04

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 637

igubal® flange bearings

igubal® Flange Bearings | Product Range

Flange bearing with 4 mounting holes: EFSM

Spherical ball made from high wear-resistant iglidur® W300 Easy assembly Compensation of alignment errors Corrosion-resistant Light weight Mainteance-free, dry-running

Technical Data Part number

Maximum static axial load

Maximum static radial load

Maximum static torque

Max. pivot angle

Weight

Short term

Long term

Short term

Long term

Holes

[N]

[Nm]

EFSM-04

200

100

1,000

500

0.6

28°

2.6

EFSM-05 EFSM-06 EFSM-08 EFSM-10 EFSM-12 EFSM-15 EFSM-16 EFSM-17 EFSM-20 EFSM-25 EFSM-30

300 300 450 700 850

150 150 225 350 425

1,000 1,000 1,400 2,000 2,500

500 500 700 1,000 1,250

0.6 0.6 1.3 2.5 2.5

29° 25° 25° 25° 21°

2.7 2.8 5.9 9.1 11

1,100 1,350 1,600 2,000 2,400 2,800

550 675 800 1,000 1,200 1,400

3,000 3,200 3,400 4,000 5,600 6,000

1,500 1,600 1,700 2,000 2,800 3,000

4.5 4.5 4.5 10.5 10.5 21.5

20° 27° 21° 19° 15° 14°

20.2 23.3 27.9 45 76 100.7

Spherical bearing material to choose J4VEM: clearance-free

[g]

page 667

JEM: low moisture absorption

REM: low-cost

638 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/efsm

igubal® flange bearings

igubal® Flange Bearings | Product Range

Order key

EFSM-04

A1 A1

Ag Ag

Inner diameter Metric 4 holes Flange bearing Series

d1 d1 dB dB

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [mm] Part number

E10

EFSM-04 EFSM-05 EFSM-06 EFSM-08 EFSM-10 EFSM-12 EFSM-15 EFSM-16 EFSM-17 EFSM-20 EFSM-25 EFSM-30

Width

Hole pitch ±0.1

Height of plate

Height total

Bore d

4 5 6

14.0 14.0 14.0

25.0 25.0 25.0

17.0 17.0 17.0

4.5 4.5 4.5

8.5 8.5 8.5

3.2 3.2 3.2

8 10 12 15 16 17 20 25 30

18.0 21.9 25.0 30.0 32.0 35.0 40.0 48.5 54.5

33.0 38.0 40.0 49.0 52.0 54.0 65.0 74.0 85.0

22.0 26.0 28.0 34.0 36.0 38.0 45.0 52.0 60.0

5.5 6.5 7.0 8.5 9.0 10.0 11.0 14.0 15.0

10.5 12.0 13.0 15.5 16.5 18.0 20.0 25.0 26.0

4.3 5.3 5.3 6.4 6.4 6.4 8.4 8.4 10.5

To apply to following standard tolerances: from 0,5 to 6 mm: ±0.1 mm over 6 to 30 mm: ±0.2 mm over 30 to 120 mm: ±0.3 mm

delivery available time from stock

prices price list online www.igus.co.uk/en/efsm

order part number example EFSM-04

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 639

igubal® flange bearings

igubal® Flange Bearings | Product Range

Flange bearing with 4 mounting holes and split housing: KFSM GT L J

Order key

KFSM-GT-35

L J

d1 dn

J L

Inner diameter Split housing Metric 4 holes Flange bearing Series

A1 B

J L

A1 B

d1 dn

Preassembled delivery Resistant to dirt

Material: Housing: RN33 page 983 Spherical ball: iglidur® J page 674

Light weight For high static loads High tensile strength Predictable lifetime Maintenance-free, dry-running

Technical Data Part number

Maximum static radial load

Maximum static axial load

Weight

Short term

Long term

Short term

Long term

[N]

[g]

KFSM-GT-35*

5,000

2,500

4,500

2,250

183.5

KFSM-GT-40 KFSM-GT-45* KFSM-GT-50

5,000 6,000 6,000

2,500 3,000 3,000

4,500 5,000 5,000

2,250 2,500 2,500

161.6 294.6 260.1

Max. tightening torque for fixing: 30 Nm

Dimensions [mm] Part number

Max. pivot angle

E10

KFSM-GT-35*

35.0

59.0

26.0

66.0

30.0

45.0

48.5

66.0

92.0

13.5

24°

KFSM-GT-40 KFSM-GT-45* KFSM-GT-50

40.0 45.0 50.0

59.0 72.0 72.0

26.0 26.0 26.0

66.0 82.0 82.0

30.0 40.0 40.0

45.0 60.0 60.0

48.5 60.0 60.0

66.0 78.0 78.0

92.0 104.0 104.0

13.5 13.5 13.5

24° 24° 24°

For KFSM with distance pieces, please add an “A” to the part no, e. g.: KFSM-GT50A Diameter given by iglidur® J bore reducer

delivery available time from stock

prices price list online www.igus.co.uk/en/kfsm-gt

640 Lifetime calculation, CAD files and much more support

order Part number example KFSM GT-35 www.igus.co.uk/en/kfsm-gt

igubal® flange bearings

igubal® Flange Bearings | Product Range High-temperature flange bearing with 2 mounting holes: EFOM-HT dB d1 dB d1

EFOM-06-HT

L L

N N

Order key

High temperature Dimensions Metric 2 holes Flange bearing Series

Ag Ag

A1 A1

J H J H

Applicable at high temperatures up to +200 °C Spherical ball made of high temperature resistant iglidur® X

Material: Housing: iguton G page 983 Spherical ball: iglidur® X page 673

Easy assembly Compensation for alignment errors Corrosion-resistance Light weight Maintenance-free, dry-running Chemical-resistant, under-water use

Dimensions [mm] Part number

E10

Length

Width

Hole pitch ±0.1

Height of plate

Total height

Bore diameter d·l

Max. pivot angle

Weight

[g]

EFOM-05-HT

14.0

33.8

16.0

24.0

4.5

8.5

3.2 x 5.0

29°

2.5

EFOM-06-HT EFOM-08-HT EFOM-10-HT EFOM-12-HT

6 8 10 12

14.0 18.0 22.0 25.0

33.8 44.2 52.0 56.7

16.0 22.0 26.0 31.0

24.0 31.0 36.0 41.0

4.5 5.5 6.5 7.0

8.5 10.5 12.0 13.0

3.2 x 5.5 4.3 x 6.5 5.3 x 8.0 5.3 x 8.0

27° 24° 24° 21°

2.3 5.0 8.3 10.7

delivery available time from stock

prices price list online www.igus.co.uk/en/efom-ht

order Part number example EFOM-06 HT

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 641

igubal® flange bearings

igubal® Flange Bearings | Product Range

High-temperature flange bearing with 4 mounting holes: EFSM-HT

EFSM-06-HT

Order key

High temperature Dimension Metric 4 holes Flange bearing Series

d1 dB d1 dB

Applicable at high temperatures up to +200 °C Spherical ball made of high temperature resistant iglidur® X Easy assembly Compensation for alignment errors Corrosion-resistance Light weight Maintenance-free, dry-running Chemical-resistant, under-water use

Material: Housing: iguton G page 983 Spherical ball: iglidur® X page 673

Dimensions [mm] Part number

E10

Max.

Length

Hole pitch ±0.1

Height of plate

Total height

Bore diameter

pivot angle

Weight [g]

EFSM-05-HT

14.0

25.0

17.0

4.5

8.5

3.2

29°

3.5

EFSM-06-HT EFSM-08-HT EFSM-10-HT EFSM-12-HT

6 8 10 12

14.0 18.0 22.0 25.0

25.0 33.0 38.0 40.0

17.0 22.0 26.0 28.0

4.5 5.5 6.5 7.0

8.5 10.5 12.0 13.0

3.2 4.3 5.3 5.3

25° 25° 25° 21°

3.3 7.1 11.2 13.3

delivery available time from stock

prices price list online www.igus.co.uk/en/efsm-ht

642 Lifetime calculation, CAD files and much more support

order part number example EFSM-06 HT www.igus.co.uk/en/efsm-ht

igubal速 pressfit spherical bearing

igubal速 Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength

643

igubal® pressfit spherical bearing

igubal® Pressfit Spherical Bearings

The use of pivoting bearings is usually associated with high weight materials, difficult installation, and high costs. Most of the time, maintenance is still necessary long term, and the bearings are only corrosion resistant in special designs. igubal® pressfit spherical bearings put an end to all of these disadvantage: they are easy to fit, cost-effective, lightweight and robust.

Easy to fit

Extremely cost-effective

Chemical-resistant

Light weight

When to use it? For high axial and radial loads When an easy installation is required In case of reduced installation place If chemical resistance is required If a cost-effective option is requested If you need dirt-resistant bearings To adjust misalignment If you need splitting components

When not to use it? If temperatures are higher than +80 °C If dimensions above 30 mm are necessary If rotation speeds higher than 0.5 m/s are required

High strength

Temperature +80º

Product range 13 types Ø 2–30 mm

–30º

644

More information

www.igus.co.uk/pressfit-sphericals

igubal® Pressfit Spherical Bearings | Application Examples

igubal® pressfit spherical bearing

Typical sectors of industry and application areas Food industry Railway technology Automotive Plant construction etc.

Improve technology and reduce costs – 110 exciting examples online

www.igus.co.uk/igubal-applications

www.igus.co.uk/food

www.igus.co.uk/traffic

www.igus.co.uk/automotive

www.igus.co.uk/hose-skiving

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 645

igubal® pressfit spherical bearing

igubal® Pressfit Spherical Bearings | Technical Data

The use of spherical bearings is usually associated with high weight materials, difficult installation, and high costs. Most of the time, maintenance is still necessary long term, and the bearings are only corrosion resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design.

Tolerances Maintenance-free igubal® spherical bearings are designed to be oversized before being pressfitted. After correct installation into a recommended housing bore, the inner diameter adjusts to meet our specified tolerances. Please pressfit the igubal® spherical bearings into a housing tolerance of H7, and use a shaft of h tolerance, normally h6 to h9. This will help to ensure optimal performance of iglidur® plain bearings. If you have any questions, please contact an iglidur® technical expert for assistance.

Installation igubal pressfit spherical bearings are easy to fit igubal® pressfit spherical bearings are cost-effective igubal® pressfit spherical bearings are light weight igubal® pressfit spherical bearings have a high strength ®

igubal® spherical bearings are pressfitted into a recommended housing bore and axially secured. An exact orientation of the bearing housing is not necessary, since the spherical bearing compensates for alignment errors.

Area of application

Dimensions

Ease of installation makes diverse applications possible for igubal® spherical bearings. They can be used anywhere. The self-aligning feature offers design advantages or helps to simplify assembly.

igubal® spherical bearings are manufactured according to DIN ISO 12240 dimensional series K and E. The product range provides dimensions from 0.19 to 1.0” and 2 to 30 mm. Please contact us if you need other dimensions.

Pivot angle

646 Lifetime calculation, CAD files and much more support

www.igubal.co.uk

igubal® Pressfit Spherical Bearings | Product Overview

igubal® pressfit spherical bearing

igubal® pressfit spherical bearing NEW!*

KGLM Series K metric

page 648

KGLM LC

KGLM SL

page 649

page 650

Series K metric

KGLM H Series K metric

page 651

KGLI

Series K inches

page 652

EGLM Series E metric

page 653

igubal® self-aligning clip bearing

ECLM

Series E metric

page 654

ECLM-HD Series E metric

page 655

EGFM-…T Series E metric

page 656

igubal® double joint

EGZM Series E metric

page 658

EGXM Series E metric

page 659

NEW!*

WDGM

KDGM

metric

page 660

Series K metric

page 661

* in this catalog

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 647

igubal® pressfit spherical bearing

igubal® Pressfit Spherical Bearings | Product Range

Pressfit spherical bearing: KGLM B

Order key

Dimension Metric Pressfit spherical bearing Series

30°

KGLM-02

KGLM

Compensation of misalignment and edge loads Corrosion-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Technical Data and Dimensions [mm] Part number

KGLM-02 KGLM-03 KGLM-05 KGLM-06 KGLM-08 KGLM-10 KGLM-12 KGLM-14 KGLM-16 KGLM-18 KGLM-20 KGLM-22 KGLM-25 KGLM-30

Max. static compressive strength

Max. torque through ball

E10

Max. pivot angle

Weight

radial

axial*

[N]

[Nm]

300 550 1,300

60 200 500

1 2 5

2 3 5

8 10 13

4 6 8

3.0 4.5 6.0

32° 32° 30°

0.1 0.5 1.0

1,800 2,700 4,000 5,400 6,000 8,000 9,000 10,000 11,700 13,600 20,000

650 1,200 1,400 1,500 2,500 3,000 4,000 5,000 6,500 7,500 9,000

10 12 20 30 35 40 45 55 60 65 70

6 8 10 12 14 16 18 20 22 25 30

16 19 22 26 28 32 35 40 42 47 55

9 12 14 16 19 21 23 25 28 31 37

6.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0 20.0 22.0 25.0

29° 25° 25° 25° 23° 23° 23° 23° 22° 22° 22°

1.6 2.9 4.4 7.0 9.1 12.8 16.6 24.4 28.5 39.3 62.6

[g]

* The maximum static axial load is determined in a remote location hole.

delivery available time from stock

prices price list online www.igus.co.uk/en/kglm

648 Lifetime calculation, CAD files and much more support

order part number example KGLM-02

www.igus.co.uk/pressfit-sphericals

igubal® pressfit spherical bearing

igubal® Pressfit Spherical Bearings | Product Range Pressfit spherical bearing: KGLM Low Cost B C

Order key

KGLM-10 LC

30°

Low Cost Dimension Metric Pressfit spherical bearing Series

f B C

Spherical ball can be replaced Easy to install Low-cost Slotted housing

Material: Housing: igumid G page 983 Spherical balls: iglidur® W300 page 671 Other spherical balls on request page 667 30 °

Technical Data Part number

Max. static compressive strength (short term)

KGLM-10 LC KGLM-12 LC KGLM-16 LC KGLM-20 LC KGLM-25 LC KGLM-30 LC

Weight

radial

axial

[N]

[g]

4,000 5,400

1,400 1,500

4.3

8,000 10,000 13,600 20,000

3,000 5,000 7,500 9,000

12.7 23.6 38.9 61.0

6.9

* The maximum static axial load is determined in a remote location hole.

Dimensions [mm] Part number

KGLM-10 LC

22.0

10.5

0.8

Max. pivot angle 25°

KGLM-12 LC KGLM-16 LC KGLM-20 LC KGLM-25 LC KGLM-30 LC

12 16 20 25 30

26.0 32.0 40.0 47.0 55.0

16 21 25 31 37

12 15 18 22 25

0.8 0.8 0.8 0.8 1.0

25° 23° 23° 22° 22°

E10

delivery available time from stock

prices price list online www.igus.co.uk/en/kglm-lc

order part number example KGLM-10 LC

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 649

igubal® pressfit spherical bearing

igubal® Pressfit Spherical Bearings | Product Range

Pressfit spherical bearing: KGLM Slim Line

Order key

KGLM-08 SL

30 ϒ

Slim line Dimension Metric Pressfit spherical bearing Series d2 Pressanpassung in Aufnahme d2

d2 d2 d1 Pressanpassung Pressanpassung in Aufnahme in Aufnahmed2 d2

d1 d1

30 ϒ

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

B B

5ϒ

m 5ϒ

a x.

5ϒ

Very small space, wall thickness 50 % thiner than KGLM compared to KGLM Angle compensation up to 5 ° Low weight

Technical Data and Dimensions [mm] Part number

Max. static compressive Max. static compressive strength (short term) strength (long term)

E10

Max. pivot angle

Weight

radial

axial

radial

axial

[N]

KGLM-08 SL

2,700

450

1,350

225

9.0

0.5

5°

1.1

KGLM-10 SL KGLM-12 SL KGLM-16 SL

4,000 4,500 6,500

750 750 500

2,000 2,250 3,250

375 375 250

10 12 16

16 18 22

10.5 0.5 12.0 0.5 15.0 0.5

5° 5° 5°

1.5 2.0 3.1

delivery available time from stock

[g]

prices price list online www.igus.co.uk/en/kglm-sl

650 Lifetime calculation, CAD files and much more support

order part number example KGLM-08 SL

www.igus.co.uk/pressfit-sphericals

NEW in this catalog! ®

igubal Pressfit Spherical Bearings | Product Range

igubal® pressfit spherical bearing

Pressfit spherical bearing: KGLM-H Soft Touch

Order key

KGLM-16 H Haptics Dimension Metric Pressfit spherical bearing Series

B C

Material: Housing: igumid G page 983 Spherical ball: iglidur® L250 page 239

30 °

0,8

Quiet operation Low tolerances Easy to install Chemical- and corrosion-resistant Compensation of misalignment errors, precise run

Technical Data and Dimensions [mm] Part number

KGLM-16-H

Max. static compressive Max. static compressive strength (short term) strength (long term) radial

axial

radial

axial

[N]

4,000

300

2,000

150

delivery available time from stock

E10

Max. pivot angle

Weight

[g]

prices price list online www.igus.co.uk/en/kglm-h

21.0

22°

12.2

order part number example KGLM-16 H

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 651

igubal® pressfit spherical bearing

igubal® Pressfit Spherical Bearings | Product Range

Pressfit spherical bearing: KGLI B C

B C

Order key

Dimension Inch Pressfit spherical bearing Series

30°

d2 d1

KGLI-03

KGLI

Inch dimensions Compensation of misalignment and edge loads Corrosion-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Technical Data and Dimensions [Inch] Part number

KGLI-03 KGLI-04 KGLI-05 KGLI-06 KGLI-07 KGLI-08 KGLI-10 KGLI-12 KGLI-16

Max. static compressive strenght

Max. torque through ball

radial

axial*

[N]

[Nm]

1,000 1,500 2,000 2,800 3,750 4,250 5,300 8,500 13,600

150 250 350 400 450 500 750 850 2,500

5 10 12 20 30 35 40 55 65

delivery available time from stock

E10

Max. pivot angle

Weight

[g]

.1900 .2500 .3125 .3750 .4375 .5000 .6250 .7500 1.0000

.5625 .312 .6562 .375 .7500 .437 .8125 .500 .9375 .562 1.0625 .625 1.1875 .750 1.4375 .875 2.1250 1.375

prices price list online www.igus.co.uk/en/kgli

652 Lifetime calculation, CAD files and much more support

.218 .250 .281 .312 .343 .390 .500 .593 1.005

34° 30° 29° 25° 25° 25° 23° 23° 23°

1.2 1.7 2.6 3.3 4.9 7.1 10.2 17.5 62.7

order part number example KGLI-03

www.igus.co.uk/pressfit-sphericals

igubal® Pressfit Spherical Bearings | Product Range

igubal® pressfit spherical bearing

Pressfit spherical bearing: EGLM B C

Order key

Dimension Metric Pressfit spherical bearing Series 30°

EGLM-04

Compensation of misalignment errors and edge loads Corrosion-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Technical Data and Dimensions [mm] Part number

Max. static Max. compressive strength torque through ball radial

axial*

[N]

E10

Max. pivot angle

[Nm]

Weight

[g]

EGLM-04

600

3.0

37°

0.4

EGLM-05 EGLM-06 EGLM-08 EGLM-10 EGLM-12 EGLM-15 EGLM-16 EGLM-17 EGLM-20 EGLM-25 EGLM-30

1,000 1,200 1,800 2,500 3,800

130 150 175 400 650

2 2.5 7 14 25

5 6 8 10 12

14 14 16 19 22

6 6 8 9 10

4.0 4.0 5.0 6.0 7.0

33° 27° 24° 24° 21°

0.8 0.9 1.2 1.9 2.8

5,500 6,000 6,300 9,000 14,000 17,000

1,000 1,150 1,200 1,400 2,900 4,000

30 32 35 40 55 70

15 16 17 20 25 30

26 28 30 35 42 47

12 13 14 16 20 22

9.0 9.5 10.0 12.0 16.0 18.0

21° 21° 21° 18° 16° 13°

6.9 9.0 10.6 16.3 29.0 37.4

* The maximum static axial load is determined in a remote location hole.

delivery available time from stock

prices price list online www.igus.co.uk/en/eglm

order part number example EGLM-04

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 653

igubal® pressfit spherical bearing

igubal® Self-aligning Clip Bearing | Product Range

Self-aligning clip bearing: ECLM b2 b1

Order key y

d4 b2

d1 b1

ECLM-05-02 B

d4 d1

Sheet thickness Dimension Metric Self-aligning clip bearing Series

y B

Very easy installation by simply snapping into sheet metal No additional axial fastening necessary Extremely small installation space: space-saving, thin-walled design

Material: Housing: igumid G page 983 Spherical ball: iglidur® J page 674

Technical Data Part number

ECLM-05-02 ECLM-06-02 ECLM-08-02 ECLM-10-03 ECLM-12-03 ECLM-16-03

Max. static compressive strength (short term)

Max. static compressive strength (long term)

radial

axial

Weight

axial

[N]

[g]

700 700 1,000 1,400 1,800 2,800

25 25 25 15 20 40

350 350 500 700 900 1,400

12.5 12.5 12.5 7 10 20

0.5 0.5 0.5 0.8 0.8 1.1

Dimensions [mm] Part number

E10

ECLM-05-02 ECLM-06-02 ECLM-08-02 ECLM-10-03 ECLM-12-03 ECLM-16-03

5 6 8 10 12 16

delivery available time from stock

±0.2

9 9 10.5 12.4 14.2 18.15

12 12 14 16 18 22

±0.1

13 13 15 17 19 24

2.0 2.0 2.0 3.0 3.0 3.0

prices price list online www.igus.co.uk/en/eclm

654 Lifetime calculation, CAD files and much more support

3.9 3.9 3.9 4.5 4.5 4.5

6.0 6.0 6.0 6.7 6.7 6.7

Max. pivot angle 25° 18° 16° 12° 12° 12°

order part number example ECLM-05-02

www.igus.co.uk/pressfit-sphericals

igubal® Self-aligning Clip Bearing | Product Range

igubal® pressfit spherical bearing

Self-aligning clip bearing: ECLM-HD

Order key d4 d2

d1 E10

ECLM-10-05-HD Heavy Duty Sheet thickness Dimension Metric Self-aligning clip bearing Series

High axial and radial loads Adjustment of axial and radial clearance by preloading Easily clips into sheet metal No additional axial fastening necessary For sheet thickness 5 mm

Material: Housing: igumid G page 983 Spherical balls: iglidur® W300 page 671 Other spherical balls on request page 667

Technical Data Part number

ECLM-10-05-HD

Max. static compressive strength (short term)

Max. static compressive strength (long term)

radial

axial

Weight

axial

[N]

[g]

2,500

150

1,250

3.1

Dimensions [mm] Part number

E10

ECLM-10-05-HD

10.0

9.0

Spherical bearing material to choose REM: low-cost

delivery available time from stock

±0.15

JEM: low moisture absorption

22.0

y ±0.1

5.0

Max. pivot angle 24°

page 667 UWEM: for under water applications

prices price list online www.igus.co.uk/en/eclm-hd

J4VEM: clearance-free spherical ball

order part number example ECLM-10-05-HD

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 655

igubal® pressfit spherical bearing

igubal® Self-aligning Clip Bearing | Product Range

Self-aligning clip bearing: EGFM-T

Order key

EGFM-08 T Tolerance compensation Inner diameter d1 Metric Self-aligning clip bearing with flange Series Material: Housing: igumid G page 983 Spherical balls: iglidur® W300 page 671 Other spherical balls on request page 667

Maintenance-free, dry-running Easy to fit Max. tolerance compensation ±0.2 mm

Technical Data Part number

Max. stat. compressive force (short term)

EGFM-08 T SL EGFM-10 T EGFM-12 T EGFM-16 T EGFM-20 T EGFM-25 T EGFM-30 T

Max. stat. compressive force (long term)

Weight

radial

axial

radial

axial

[N]

[g]

1,100 1,900 2,500 6,000 9,000 14,000 17,000

150 220 270 600 800 2,800 3,000

550 950 1,250 3,000 4,500 7,000 8,500

75 110 135 300 400 1,400 1,500

0.9 2.4 3.0 6.6 11.1 19.0 24.0

Dimensions [mm] Part number EGFM-08 T SL* EGFM-10 T EGFM-12 T EGFM-16 T EGFM-20 T EGFM-25 T EGFM-30 T

d1 8 (H10) 10 (E10) 12 (E10) 16 (E10) 20 (E10) 25 (E10) 30 (E10)

min.

max.

15.8 20.8 22.8 29.8 34.8 41.8 46.8

16.5 21.6 23.6 30.6 35.6 42.6 47.6

d3 18 26 28 35 42 50 55

C 5.0 6.0 7.0 9.5 12.0 16.0 18.0

6 9 10 13 16 20 22

1.1 1.0 1.0 1.5 2.0 2.0 2.0

Housing min.

max.

15.8 20.8 22.8 29.8 34.8 41.8 46.8

16.2 21.2 23.2 30.2 35.2 42.2 47.2

Max. pivot angle 11° 24° 21° 21° 18° 16° 13°

* Spherical ball from iglidur® J

Spherical bearing material to choose REM: low-cost

delivery available time from stock

page 667

UWEM: for under water applications

J4VEM: clearancefree spherical ball

prices price list online www.igus.co.uk/en/egfm-t

656 Lifetime calculation, CAD files and much more support

order part number example EGFM-08 T

www.igus.co.uk/pressfit-sphericals

My Sketches

igubal速 pressfit spherical bearing

igus速 (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 657

igubal速 pressfit spherical bearing

igubal速 Double Joint | Product Range

Double joint: EGZM

Order key

EGZM-04-25 d1 d1 a

d2 d2

Pitch X Inner diameter d1 Metric Double joint Series

Material: Housing: igumid G page 983 Spherical ball: iglidur速 W300 page 671

Maintenance-free, self-lubricating Mechanical joining link between 2 components Compensation of misalignment errors Corrosion-resistant

Technical Data and Dimensions [mm] Part number

Max. static tensile Max. static tensile strength (short term) strength (long term)

Weight

E10

radial

axial

radial

axial

[N]

EGZM-04-25

1,100

1,300

550

650

3.5

EGZM-04-50 EGZM-04-75 EGZM-05-25 EGZM-05-50 EGZM-05-75 EGZM-06-25 EGZM-06-50 EGZM-06-75 EGZM-08-60 EGZM-08-100 EGZM-10-60 EGZM-10-85

1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 3,000 3,000 2,500 2,500

750 500 1,300 750 500 1,300 750 500 3,500 1,900 3,500 2,300

550 550 550 550 550 550 550 550 1,500 1,500 1,250 1,250

375 250 650 375 250 650 375 250 1,750 950 1,750 1,150

04 04 05 05 05 06 06 06 08 08 10 10

20 20 20 20 20 20 20 20 20 30 30 30

50 75 25 50 75 26 50 75 60 100 60 85

4 4 4 4 4 4 4 4 7 7 7 7

10 10 10 10 10 10 10 10 15 15 15 15

4.8 6.1 2.2 4.9 6.3 3.4 4.8 3.4 15.2 19.5 15.3 18.1

EGZM-10-100

2,500

1,900

1,250

950

100

19.4

EGZM-12-60 EGZM-12-100

2,000 2,500

3,500 1,900

1,000 1,000

1,750 950

12 12

30 30

60 100

7 7

15 15

14.7 18.8

Spherical bearing material to choose REM: low-cost

delivery available time from stock

[g]

page 667

JEM: low moisture absorption

J4VEM: clearancefree spherical ball

prices price list online www.igus.co.uk/en/egzm

658 Lifetime calculation, CAD files and much more support

order part number example EGZM-04-25

www.igus.co.uk/pressfit-sphericals

igubal® pressfit spherical bearing

igubal® Double Joint | Product Range Double joint: EGXM

Order key

EGXM-06-75 Pitch Dimensions Metric Double joint, turned 90 ° Series

ø E10 Double joint, turned 90 ° Easy to fit Custom-design, with or without ball stud Maintenance-free iglidur® W300 spherical ball

Material: Housing: igumid G page 983 Spherical ball: variabel page 667

Technical Data and Dimensions [mm] Part number

EGXM-06-75

Max. permitted tensile force

Max. permitted ø Centre Head Housing compressive strength Sphercial distance thickness size ball short term long term short term long term

Weight

[N]

[g]

1,100

550

1,600

800

7.7

Further dimensions on request Further combinations: EGXM-06-75 ZM (with metal ball stud) EGXM-06-75 ZK (with plastic ball stud) EGXM-06-75 EK (with stainless steel ball)

delivery available time from stock

prices price list online www.igus.co.uk/en/egxm

order part number example EGXM-06-75

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 659

igubal® pressfit spherical bearing

NEW in this catalog! ®

igubal Double Joint | Product Range

Variable double joint: WDGM

Order key

WDGM-05-XX Center distance Dimension Metric Double joint Angle Version A Version B Version C

Socket cup M5, M6, M8 and M10 Individual center dimensions and lengths Individual alignment of the bearing position

Material: Housing: igumid G page 983 Ball stud: igumid G, steel or stainless steel

Dimensions [mm] Part number

WDGM-05-XX

12.8

8.0

45.0

10.8

4.6

19.2

Max. pivot angle 23°

WDGM-06-XX

14.8

10.0

50.0

12.3

6.1

23.5

25°

WDGM-08-XX WDGM-10-XX

M8 M10

19.3 24.0

12.0 14.0

60.0 70.0

16.2 20.0

5.9 7.9

29.5 36.0

24° 25°

min.

Please complete the part no. with the required center distance in mm and the alignment of the bearing position. Order example: WDGM-05-100-A, center distance 100 mm, ball stud in the same alignment.

delivery available time from stock

prices price list online www.igus.co.uk/en/wdgm

660 Lifetime calculation, CAD files and much more support

order part number example WDGM-05-XX

www.igus.co.uk/pressfit-sphericals

igubal® pressfit spherical bearing

NEW in this catalog! ®

igubal Double Joint | Product Range Variable double joint: KDGM

Order key

KDGM-06-XX Center distance Dimension Metric Double joint Series

Version A

Version B

Ball diameters 6, 8, 10 and 12 mm Individual center dimensions and lengths Individual alignment of the bearing position

Material: Housing: igumid G page 983 Ball: iglidur® W300, iglidur® J, iglidur® J4 and stainless steel

Dimensions [mm] Part number

Max.

20.0 24.0 30.0 34.0

6.0 8.0 10.0 12.0

50.0 65.0 80.0 90.0

9.0 12.0 14.0 16.0

7.0 9.0 10.5 12.0

pivot angle 40° 35° 35° 35°

E10

KDGM-06-XX KDGM-08-XX KDGM-10-XX KDGM-12-XX

6.0 8.0 10.0 12.0

Please complete the part no. with the required center distance in mm and the alignment of the bearing position. Order example: KDGM-05-100-A, center distance 100 mm, ball in the same alignment.

delivery available time from stock

prices price list online www.igus.co.uk/en/kdgm

order part number example KDGM-06-XX

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 661

igubal速 pressfit spherical bearing

My Sketches

662 Lifetime calculation, CAD files and much more support

www.igus.co.uk/pressfit-sphericals

igubal速 thrust bearings

igubal速 Spherical Thrust Bearings Easy to install Compensation of misalignment errors Compensation of edge loads Very good friction and wear properties

663

igubal® thrust bearings

igubal® Spherical Thrust Bearing

igubal® self-aligning spherical thrust bearings are very easy to fit and help to compensate misalignment errors and prevent edge loads.

Easy to install

Compensation of misalignment errors Prevent edge loads Very good friction and wear properties

Temperature +80º

When to use it? If you want to save weight If corrosion resistance is desired If a bearing with a good coefficient of friction is sought

When not to use it? At very high loads If temperatures are higher than +80 °C If a high number of revolutions have to achieved

Product range 1 types Ø 5–20 mm

–30º

664

More information

www.igus.co.uk/thrust

igubal® Spherical Thrust Bearing | Technical Data

igubal® thrust bearings

Mechanical Properties

Coefficients of Friction and Speed

igubal self-aligning spherical thrust bearings are very easy to fit and help to compensate for alignment errors and prevent edge loads.The housing pad is made of the impact resistant, thermoplastic composite material igumid G. The spherical washer is made of the iglidur® W300 plain bearing material. This combination provides exceptionally good friction and wear properties.

Taking into account the radial load, maximum surface speeds up to 0.5 m/s rotating are possible.

Loads The load capacity of igubal® spherical thrust bearings is very high for standard ambient temperatures. For high continuous loads and high temperatures, the load capacity of the thrust bearings should be tested in an experiment that simulates the application.

Installation The housing pad is installed so that it is countersunk and secured. The spherical washer is loosely fitted in the socket and is held in place by the shaft that is placed into the bearing.

Product Range igubal® spherical thrust bearings are available in standard form to suit diameters from 5 to 20 mm. Please contact us if you require other dimensions.

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 665

igubal® thrust bearings

igubal® Spherical Thrust Bearing | Product Range

Spherical thrust bearing: SAM

Order key

SAM-05 Inner-Ø d1 Metric Type

Spherical washer R1-Ball h1

Material: Spherical washer: iglidur® W300 page 131 Housing pad: igumid G page 683

d1 d2

Housing pad

d3 d2

Technical Data Part number

Maximum static axial tensile strength

short term

long term

[N]

[g]

4,000 5,000 8,000 10,000 12,000 17,000 22,000

2,000 2,500 4,000 5,000 6,000 8,500 11,000

0.9 1.1 2.2 3.4 5.9 8.5 12.8

SAM-05 SAM-06 SAM-08 SAM-10 SAM-12 SAM-16 SAM-20

Weight

Dimensions [mm] Part number

SAM-05 SAM-06 SAM-08 SAM-10 SAM-12 SAM-16 SAM-20

housing pad DIN 7168

spherical washer DIN 7168

5.2 6.2 8.2 10.2 12.5 16.5 20.2

7.0 7.5 10.0 12.0 14.5 19.0 23.0

delivery available time from stock

15.0 16.0 20.0 24.0 30.0 36.0 44.0

housing pad

spherical washer

total height

radius

3.0 3.0 4.0 4.5 5.0 5.5 6.0

3.5 4.0 5.0 5.5 6.0 6.5 7.0

4.7 5.3 6.8 7.5 8.0 8.7 8.6

15.0 16.0 20.0 24.0 32.0 40.0 45.0

prices price list online www.igus.co.uk/en/sam

666 Lifetime calculation, CAD files and much more support

Compensation angle

3º 3º 2º 2º 2º 2º 2º

order part number example SAM-05 www.igus.co.uk/thrust

igubal速 spherical balls

igubal速 Spherical Balls Maintenance-free, self-lubricating Corrosion-resistant High compressive strength High elasticity Light weight Different materials

667

igubal® spherical balls

igubal® Spherical Balls

Every single iglidur® material has its own special properties, which determines the suitability for your special applications and requirements. Today, we offer you spherical bearings from iglidur® materials W300 (standard), J, J4, R, UW and X.

Maintenance-free, self-lubricating

Corrosion-resistant

When to use it? If you need maintenance-free material When dimensional series E and K components should be installed If different iglidur® materials should be tested If high compressive strength is required If high elasticity is required

High compressive strength

High elasticity

When not to use it? If temperatures are higher than +250 °C If dimensions above 50 mm are necessary If rotation speeds higher than 0.5 m/s are required

Light weight

Different materials

668

Temperature

Product Range

Tolerances

Depend on material

6 types Ø 2–50 mm

The tolerance of the inner diameter is E10. The shaft tolerance should be included between h6 and h9.

More information

www.igus.co.uk/spherical-balls

igubal® Spherical Balls | Application Examples

igubal® spherical balls

Typical sectors of industry and application areas Plant construction Model building Furniture/Industrial design etc.

Improve technology and reduce costs – 110 exciting examples online

www.igus.co.uk/igubal-applications

Drum bearing in a tumble dryer

www.igus.co.uk/food

Carriage in a crane system

www.igus.co.uk/design

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 669

igubal® spherical balls

igubal® Spherical Balls | Product Overview

igubal® spherical balls – standard

igubal® spherical balls – low-cost

iglidur® W300

iglidur® R

WKM/WKI

WEM/WEI

RKM

REM

Series K metric/Inches

Series E metric/Inches

Series K metric

Series E metric

page 671

page 672

igubal® spherical balls – high temperatures iglidur® X

page 672

igubal® spherical balls – low moisture absorption iglidur® J

XKM

XEM

JKM

JEM

Series K metric

Series E metric

Series K metric

Series E metric

page 673

page 674

igubal® spherical balls – cost-effective iglidur® J4 NEW!*

NEW!*

J4KM

J4EM

Series K metric

Series E metric

page 675

igubal® spherical balls – under water applications iglidur® UW

igubal® spherical balls – clearance free

UWEM

J4VEM

Series E metric

page 676

page 677

* in this catalog

670 Lifetime calculation, CAD files and much more support

www.igus.co.uk/spherical-balls

igubal® spherical balls

igubal® Spherical Balls | Product Range Standard spherical balls: WKM and WKI/WEM and WEI B

WKM-02-04

30°

Order key

+90º

Width B Inner diameter d1 Measuring system m = Metric I = Inch Dimensonal series K = Series K E = Series E Spherical balls made of iglidur® W300

0,3

–40º

30°

0,3

Dimensions [mm] Part number

Dimensions [Inch] B

E10

Weight

Part number

[g]

E10

Weight [g]

WKM-02-04

2.00

3.90

5.10

4.00

0.1

WKI-03

.1900

.307

.444

.312

0.6

WKM-03-06 WKM-05-08 WKM-06-09 WKM-08-12 WKM-10-14 WKM-12-16 WKM-14-19 WKM-16-21 WKM-18-23 WKM-20-25 WKM-22-28 WKM-25-31 WKM-30-37

3.00 5.00 6.00 8.00 10.00

5.10 7.70 8.90 10.30 12.90

8.10 11.30 12.80 16.00 19.00

6.00 8.00 9.00 12.00 14.00

0.3 0.6 0.9 1.6 2.7

.2500 .3125 .3750 .4375 .5000

.354 .447 .504 .601 .700

.516 .625 .718 .828 .938

.375 .437 .500 .562 .625

1.0 1.7 2.3 3.5 5.0

12.00 14.00 16.00 18.00 20.00 22.00 25.00 30.00

15.40 16.80 19.30 21.80 24.30 25.80 29.50 34.80

22.10 25.40 28.40 31.50 35.10 38.30 42.90 51.20

16.00 19.00 21.00 23.00 25.00 28.00 31.00 37.00

4.0 6.0 8.2 10.8 14.5 18.7 26.0 44.7

WKI-04 WKI-05 WKI-06 WKI-07 WKI-08 WKI-10 WKI-12 WKI-16

.6250 .838 .7500 .978 1.0000 1.269

1.125 1.312 1.750

.750 .875 1.375

8.2 12.5 31.7

Weight

Dimensions [mm] Part number

Dimensions [Inch] dn

E10

Weight

Part number

E10

[g]

WEM-04-05

4.00

6.25

8.30

5.00

0.2

WEI-03

.1900

.354

.402

.1900

0.3

WEM-05-06 WEM-06-06 WEM-08-08 WEM-10-09 WEM-12-10 WEM-15-12 WEM-16-13 WEM-17-14 WEM-20-16 WEM-25-20 WEM-30-22

5.00 6.00 8.00 10.00 12.00

8.00 8.00 10.00 13.00 15.00

10.30 10.30 13.30 16.20 18.10

6.00 6.00 8.00 9.00 10.00

0.3 0.4 0.7 1.2 1.5

15.00 16.00 17.00 20.00 25.00 30.00

18.00 19.50 20.00 24.00 29.00 34.00

22.00 24.10 25.10 29.10 35.60 40.90

12.00 13.00 14.00 16.00 20.00 22.00

2.4 3.3 3.7 5.3 9.5 12.1

WEI-04 WEI-05 WEI-06 WEI-07 WEI-08 WEI-10 WEI-12 WEI-16

.2500 .314 .3125 .415 .3750 .506 .4375 .581 .5000 .581 .6250 .802 .7500 .951 1.0000 1.180

.402 .520 .630 .709 .709 .945 1.138 1.398

.2500 .3125 .3750 .4063 .4063 .5000 .6250 .7500

0.3 0.7 1.3 1.6 2.6 3.1 5.9 9.2

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 671

igubal® spherical balls

igubal® Spherical Balls | Product Range

Low-cost spherical balls: RKM and REM B

R...M-10-14

30°

Order key

+90º

Width B Inner diameter d1 Metric Dimensional series K = Series K E = Series E Spherical balls made of iglidur® R

0,3

–50º

30°

0,3

Dimensions [mm] Part number

E10

Weight [g]

10.00

12.90

19.00

14.00

2.9

Part number

Weight

REM-05-06

5.00

8.00

10.20

6.00

0.4

REM-06-06 REM-08-08 REM-10-09 REM-12-10

6.00 8.00 10.00 12.00

8.00 10.00 13.00 15.00

10.20 13.20 16.10 18.10

6.00 8.00 9.00 10.00

0.4 0.8 1.3 1.6

RKM-10-14

Dimensions [mm] E10

delivery available time from stock

[g]

prices price list online www.igus.co.uk/en/rkm

672 Lifetime calculation, CAD files and much more support

order Part number example RKM-10-14 www.igus.co.uk/en/rkm

igubal® spherical balls

igubal® Spherical Balls | Product Range High temperatures spherical balls: XKM and XEM B

X...M-10-14

30°

Order key

+250º

Width B Inner diameter d1 Metric Dimensional series K = Series K E = Series E Spherical balls made of iglidur® X

0,3

–100º

30°

0,3

Dimensions [mm] Part number

E10

Weight [g]

10.00

12.90

19.10

14.00

2.9

Part number

Weight

XEM-05-06

5.00

8.00

10.30

6.00

0.4

XEM-06-06 XEM-08-08 XEM-10-09 XEM-12-10

6.00 8.00 10.00 12.00

8.00 10.00 13.00 15.00

10.20 10.30 16.10 18.10

6.00 8.00 9.00 10.00

0.4 0.8 1.3 1.6

XKM-10-14

Dimensions [mm] E10

delivery available time from stock

[g]

prices price list online www.igus.co.uk/en/xkm

order part number example XKM-10-14

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 673

igubal® spherical balls

igubal® Spherical Balls | Product Range

Low moisture absorption spherical balls: JKM and JEM B

J...M-03-06

30°

Order key

+90º

Width B Inner diameter d1 Metric Dimensional series K = Series K E = Series E Spherical balls made of iglidur® J

0,3

–50º

30°

0,3

Dimensions [mm] Part number

E10

Weight [g]

JKM-03-06

3.00

5.10

8.10

6.00

0.3

JKM-05-08 JKM-06-09 JKM-08-12 JKM-10-14 JKM-12-16 JKM-16-21 JKM-20-25 JKM-25-31 JKM-30-37 JKM-40-49 JKM-50-60

5.00 6.00 8.00 10.00 12.00

7.70 8.90 10.30 12.90 15.40

11.30 12.80 15.90 19.00 22.10

8.00 9.00 12.00 14.00 16.00

0.7 1.0 1.9 3.1 4.7

16.00 20.00 25.00 30.00 40.00 50.00

19.30 24.30 29.50 34.80 44.50 56.50

28.40 35.10 42.80 51.20 66.30 82.40

21.00 25.00 31.00 37.00 49.00 60.00

9.4 17.6 31.6 53.0 54.5 92.1

Weight

Dimensions [mm] Part number

E10

[g]

JEM-04-05

4.00

6.25

8.30

5.00

0.3

JEM-05-06 JEM-06-06 JEM-08-08 JEM-10-09 JEM-12-10 JEM-15-12 JEM-16-13 JEM-17-14 JEM-20-16 JEM-25-20 JEM-30-22

5.00 6.00 8.00 10.00 12.00

8.00 8.00 10.00 13.00 15.00

10.20 10.20 13.30 16.10 18.10

6.00 6.00 8.00 9.00 10.00

0.4 0.4 0.8 1.3 1.7

15.00 16.00 17.00 20.00 25.00 30.00

18.00 19.50 20.00 24.00 29.00 34.00

22.00 24.10 25.20 29.10 35.60 40.90

12.00 13.00 14.00 16.00 20.00 22.00

2.9 3.9 4.1 6.4 11.5 14.5

674 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/jkm

igubal® spherical balls

NEW in this catalog! ®

igubal Spherical Balls | Product Range Cost-effective spherical balls: J4KM and J4EM B

J4...M-04-05

30°

Order key

+90º

Width B Inner diameter d1 Metric Dimensional series K = Series K E = Series E Spherical balls made of iglidur® J4

0,3

–50º

30°

0,3

Dimensions [mm] Part number

E10

J4KM-10-14

Weight [g]

10.00

12.90

19.10

14.00

3.1

Weight

Dimensions [mm] Part number

E10

[g]

J4EM-04-05

4.00

6.25

8.25

5.00

0.3

J4EM-05-06 J4EM-06-06 J4EM-08-08

5.00 6.00 8.00

8.00 8.00 10.00

10.20 10.20 13.20

6.00 6.00 8.00

0.4 0.4 0.8

J4EM-10-09

10.00

13.00

16.00

9.00

1.3

J4EM-12-10 J4EM-15-12 J4EM-16-13 J4EM-17-14 J4EM-20-16 J4EM-25-20 J4EM-30-22

12.00 15.00 16.00 17.00 20.00 25.00 30.00

15.00 18.00 19.50 20.00 24.00 29.00 34.00

18.00 22.00 24.00 25.10 28.90 35.50 40.90

10.00 12.00 13.00 14.00 16.00 20.00 22.00

1.7 2.9 3.9 4.1 6.4 11.5 14.5

delivery available time from stock

prices price list online www.igus.co.uk/en/j4km

order part number example J4KM-04-05

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 675

igubal® spherical balls

igubal® Spherical Balls | Product Range

Spherical balls for under water applications: UWEM B

Order key

30°

+100º

UWEM-04-05

–50º

Dimension Inner diameter d1 Metric Series Spherical balls made of iglidur® UW

0,3

Dimensions [mm] Part number

E10

Weight [g]

UWEM-16-13

16.00

19.50

23.80

13.00

4.0

UWEM-20-16 UWEM-25-20 UWEM-30-22

20.00 25.00 30.00

24.00 29.00 34.00

29.10 35.30 40.50

16.00 20.00 22.00

6.5 11.6 15.2

delivery available time from stock

prices price list online www.igus.co.uk/en/uwem

676 Lifetime calculation, CAD files and much more support

order part number example UWEM-04-05 www.igus.co.uk/spherical-balls

igubal® spherical balls

igubal® Spherical Balls | Product Range Clearance-free, single piece: J4VEM

Order key +90º

J4VEM-10-09

–50º

Width Inner-Ø Metric Series Preloaded Material iglidur® J4

Can be combined with all series E housing Sizes 8 to 20 mm Preloaded Totally clearance-free, even in unloaded state

Dimensions [mm] Part number

Weight

E10

[g]

J4VEM-08-08

13.20

8.00

0.7

J4VEM-10-09 J4VEM-12-10 J4VEM-16-13 J4VEM-20-16

10 12 16 20

16.10 18.10 24.10 29.10

9.00 10.00 13.00 16.00

1.2 1.5 3.7 6.2

5 Sizes available: Ø 8, 10, 12, 20 mm combinable with: igubal® Rod Ends EA(L)RM ® igubal Rod Ends EB(L)RM ® igubal Pillow Block Bearing ESTM igubal® Flange Bearing EFOM

delivery available time from stock

page 586 page 588 page 627 page 636

igubal® Flange Bearing igubal® Pivoting Bearing igubal® Pivoting Bearing igubal® Double Joint

prices price list online www.igus.co.uk/en/j4vem

EFSM EGFM EGLM EGZM

page 638 page 656 page 653 page 658

order part number example J4VEM-10-09

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 677