Igubal Rod ends

igubal速 rod ends

igubal速 Rod Ends Maintenance-free, self-lubricating High strength under impact loads High tensile strength Compensation of misalignment Compensation of edge loads Very low weight

571

igubal® rod ends

igubal® Rod Ends

igubal® rod ends can also be used in rough environments. They are corrosion-resistant in humid environments and resistant to weak acids and bases. The operation temperature is from –40 °C up to +80 °C. Rod ends are also insensitive to dirt and dust.

Maintenance-free, dry-running

High strength under impact loads

High tensile strength

Compensation of misalignment Compensation of edge loads

When to use it?

If you want to save weight To realise rotating, oscillating and linear movements If high-frequency oscillations/vibrations preponderance If silent run is required If you need an electrical insulating article If corrosion resistance is required In combination with pneumatic cylinders and gas pressure springs If chemical resistance is required If high stiffness is requested

When not to use it?

If temperatures are higher than +80 °C HT version If rotation speeds higher than 0.5 m/s are required If really high tensile and transverse loads prevail If applications with hydraulic cylinders should be realised If dimensions above 30 mm are necessary

Low weight

Temperature +80º

+200º

–30º

–40º

Standard

572

Product range

More information

18 types Ø 2–30 mm

High temperature

www.igus.co.uk/rod-end

igubal® Rod Ends | Application Examples

igubal® rod ends

Typical sectors of industry and application areas Bicycle manufacturing Plant construction Packaging Offshore etc.

Improve technology and reduce costs – 110 exciting examples online

www.igus.co.uk/igubal-applications

www.igus.co.uk/special-bikes

www.igus.co.uk/textile

www.igus.co.uk/packaging

www.igus.co.uk/offshore

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 573

igubal® rod ends

igubal® Rod Ends | Technical Data

Advantages Maintenance-free High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening Suitable for rotating, oscillating and linear movements Light weight Dimensional series K and E, according to standard DIN ISO 12240 Available with a metal sleeve to take a higher torque

Loads igubal® rod ends handle high loads at normal room temperatures, have excellent dampening properties and weigh only a fifth of traditional metallic rod ends. In applications with high continuous loads and high temperatures, the load capacity of igubal® rod ends should be tested in an experiment that simulates the application.

Coefficients of Friction and Speed One important advantage of igubal® spherical bearings is that rapid, rotary movements of a mounted shaft take place directly between the shaft and the iglidur® plain spherical bearing. In metallic rod ends, rotary motion takes place between the race and the spherical bearing. High speeds can be achieved with igubal® bearings.

Product Range igubal® rod ends are available in the dimensional series K and E for shaft diameters of 2 to 30 mm.

Form A – with male thread and Form B – with female thread The dimensional series K is available in imperial dimensions, as well as a special version containing a stainless steel sleeve in the inner race. This allows a significantly higher torque than for the standard polymer race. Please ask us for more dimensons, delivery time and prices.

Temperatures Series E (types A+B) for temperatures up to +200 °C (HT material).

Tolerances igubal ® rod ends can be used at different tolerances depending on the individual application. In standard form, they are designed with a large amount of bearing clearance, which permits reliable operation even at high rotational speeds. The bore of the inner race is produced to a standard tolerance range. Shafts should also meet recommended tolerances. Please contact us if you have any questions regarding tolerances.

Pivot angle

α

574 Lifetime calculation, CAD files and much more support

www.igus.co.uk/rod-end

igubal® rod ends

igubal® Rod Ends | Product Overview igubal® rod ends with female thread

KBRM/KBLM

KBRM CL

Series K KBLM CL right/left Series K metric righ/left; metric (metal insert optional) (metal insert optional) from page 576

page 578

KBRI/KBLI

EBRI/EBLI

Series K right/left Inches from page 590

Series E right/left Inches from page 594

KCRM/KCLM

EBRM/EBLM

Series K Series E right/left right/left metric metric (metal insert optional) page 579

from page 584

EBRM HT/ EBLM HT Series E right/left metric page 588

igubal® rod ends with male thread

KARM/KALM

KARM CL

Series K right/left metric (metal insert otional)

Series K Series E right/left; metric right/left (metal insert optional) metric

from page 580

page 582

EARM/EALM

from page 586

EARM HT/ EALM HT Series E right/left metric page 589

KARI/KALI Series K right/left Inches from page 592

igubal® accessories for rod ends NEW!*

PKRM/PKLM Series K right/left metric page 600

GERMK/ GELMK

GERMF/ GELMF

WGRM/ WGLM

WGRM-LC WGLM-LC

AGRM AGLM

AGRM-LC AGLM-LC

Series E metric page 608

Series E metric page 609

right/left metric page 596

right/left metric page 597

right/left metric page 598

right/left metric page 599

* in this catalog

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 575

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with female thread: KBRM and KBLM

Standard design

Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening Suitable for rotating, oscillating and linear movements Very low weight Dimensional series K according to standard DIN ISO 12240 Available with a metal sleeve for a higher torque

Design with metal sleeve (MH)

Technical Data Part number

Max. static tensile strength

Max. static radial load

Min. Max. torque thread strength depth

Max. torque through ball

Weight

Long term [N]

Short term [N]

Long term [N]

Thread

Inner threading

Right-hand thread Left-hand thread

Short term [N]

[mm]

[Nm]

KBRM-02

200

100

50

25

4

0.30

1

–

0.4

100 250 250 400 700

50 125 125 200 350

5 7 7 8 11

0.50 0.75 1.00 1.50 5.00

2 5 5 10 12

4 12 12 15 40

2.7 3.5 3.4 4.7 8.6

800 800 900 900 1,000 1,300 1,300 1,600 2,100 2,100 2,200 2,300 2,500 2,500

400 400 450 450 500 650 650 800 1,050 1,050 1,100 1,150 1,250 1,250

13 13 15 15 17 19 19 21 22 22 25 28 34 34

15.00 6.00 20.00 15.00 25.00 30.00 27.50 45.00 60.00 60.00 75.00 120.00 135.00 135.00

20 20 30 30 35 40 40 45 55 55 60 60 60 60

50 50 70 70 75 110 110 150 200 200 – – – –

14.6 14.6 22 22 30.9 39.6 39.6 55 73.5 73.5 94.8 119.8 177 189.6

KBLM-02

KBRM-03 KBLM-03 800 400 KBRM-05 M4 KBLM-05 M4 1,000 500 KBRM-05 KBLM-05 1,000 500 KBRM-06 KBLM-06 1,400 700 KBRM-08 KBLM-08 2,100 1,050 KBRM-10 KBLM-10 3,100 1,550 KBRM-10 F KBLM-10 F 3,100 1,550 KBRM-12 KBLM-12 3,600 1,800 KBRM-12 F KBLM-12 F 3,600 1,800 KBRM-14 KBLM-14 4,000 2,000 KBRM-16 KBLM-16 4,200 2,100 KBRM-16 F KBLM-16 F 4,200 2,100 KBRM-18 KBLM-18 4,600 2,300 KBRM-20 KBLM-20 5,400 2,700 KBRM-20 M20 KBLM-20 M20 5,400 2,700 KBRM-22 KBLM-22 7,000 3,500 KBRM-25 KBLM-25 8,500 4,250 KBRM-30 KBLM-30 10,500 5,250 KBRM-30 M27x2 KBLM-30 M27x2 10,500 5,250

576 Lifetime calculation, CAD files and much more support

Standard Standard without MH with MH [Nm] [Nm]

[g]

www.igus.co.uk/en/kbrm

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: KBRM and KBLM

d2

B C1

Order key

KB…M-02

l3

h1

l4

d1

Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

d4 d5

d3 W

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [mm] Part number

d1

d2

d3

d4

d5

C1

B

h1 l3

l4

W

Max. pivot angle

2 3 5

9 13 18

M02 M03 M04

4.0 6.5 9.0

4.6 8.0 12.0

3.0 4.5 6.0

4 12.5 6 6 18.5 7 8 27 10

17 25 36

SW04 SW06 SW09

30° 30° 30°

5 6 8 10 10 12 12 14 16 16 18 20 20 22 25 30 30

18 20 24 30 30 34 34 38 42 42 46 50 50 56 60 70 70

M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M18 x 1.5 M20 x 1.5 M20 x 2.5 M22 x 1.5 M24 x 2.0 M30 x 2.0 M27 x 2.0

9.0 10.0 13.0 15.0 15.0 18.0 18.0 20.0 22.0 22.0 25.0 28.0 28.0 30.0 32.0 37.0 37.0

12.0 13.0 16.0 19.0 19.0 22.0 22.0 25.0 27.0 27.0 31.0 34.0 34.0 37.0 41.0 50.0 50.0

6.0 7.0 9.0 10.5 10.5 12.0 12.0 13.5 15.0 15.0 16.5 18.0 18.0 20.0 22.0 25.0 25.0

8 27 10 9 30 12 12 36 16 14 43 20 14 43 20 16 50 22 16 50 22 19 57 25 21 64 28 21 64 28 23 71 32 25 77 33 25 77 33 28 84 37 31 94 42 37 110 50 37 110 50

36 40 48 58 58 67 67 76 85 85 94 102 102 112 124 145 145

SW09 SW11 SW14 SW17 SW17 SW19 SW19 SW22 SW22 SW22 SW27 SW30 SW30 SW32 SW36 SW41 SW41

30° 29° 25° 25° 25° 25° 25° 25° 23° 23° 23° 23° 23° 22° 22° 22° 22°

E10 Right-hand thread Left-hand thread

KBRM-02 KBRM-03 KBRM-05 M4 KBRM-05 KBRM-06 KBRM-08 KBRM-10 KBRM-10 F KBRM-12 KBRM-12 F KBRM-14 KBRM-16 KBRM-16 F KBRM-18 KBRM-20 KBRM-20 M20 KBRM-22 KBRM-25 KBRM-30 KBRM-30 M27x2

KBLM-02 KBLM-03 KBLM-05 M4 KBLM-05 KBLM-06 KBLM-08 KBLM-10 KBLM-10 F KBLM-12 KBLM-12 F KBLM-14 KBLM-16 KBLM-16 F KBLM-18 KBLM-20 KBLM-20 M20 KBLM-22 KBLM-25 KBLM-30 KBLM-30 M27x2

For rod ends with metal insert please add MH to the part number, e. g. KRBM-10 MH (Inner-Ø: 10 mm).

delivery available time from stock

prices price list online www.igus.co.uk/en/kbrm

order Part number example KBRM-02

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 577

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends, female thread; 2nd generation: KBRM CL and KBLM CL B C1

Order key d1

Ød2

h1

h2

L1

h

KB…M-06 CL

m

L2

2nd Generation Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

d3 d4

Housing with female thread Smooth design has no dirt traps Compensation of misalignment Light weight Excellent corrosion resistance Design with metal sleeve for higher torque strength available Standard spherical bearing: iglidur® W300

Material: Housing: igumid G page 983 Spherical ball: variable page 667

Technical Data Part number

Max. static tensile strength

Right-hand thread Left-hand thread

KBRM-06 CL KBRM-08 CL KBRM-10 CL

KBLM-06 CL KBLM-08 CL KBLM-10 CL

Max. static radial load

Short term [N]

Long term [N]

Short term [N]

Long term [N]

1,400 2,100 3,100

700 1,050 1,550

300 500 800

150 250 400

d3

d4

Min. Max. torque thread strength depth Inner Thread [mm]

threading [Nm]

8 11 13

0.75 2.0 3.0

Max. torque through ball

Weight

Standard Standard without MH with MH [Nm] [Nm]

10 12 20

15 40 50

[g]

4.5 8.6 14.1

Dimensions [mm] Part number Right-h. thread

d1 Left-h. thread

d2

B

C1

h

h1

h2

L2

L1

m

E10

Max. pivot angle α

KBRM-06 CL KBLM-06 CL KBRM-08 CL KBLM-08 CL KBRM-10 CL KBLM-10 CL

6

20

M06

SW10

9

7

40 36.5 30

20 46.5

5.7

40°

8 10

24 30

M08 M10

SW13 SW15

12 9 48 44.3 36 14 10.5 58 52.2 43

25 56.3 30 67.2

7.5 8.4

35° 35°

For rod ends with metal insert please add MH to the part number, e. g. KBRM-10 CL MH (Inner-Ø: 10 mm). For another spherical bearing material please add J, R or X to the part number, e. g. KBRM-10 CL J.

Spherical ball material to choose RKM: low-cost

page 667 XKM: high temperatures

JKM: Low moisture absorption

578 Lifetime calculation, CAD files and much more support

W300: standard spherical bearing with metal sleeve

www.igus.co.uk/en/kbrm-cl

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: KCRM and KCLM

Order key

KC...M-06 Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

Housing with female thread, Standard spherical ball: iglidur® W300 Smooth design has no dirt traps Spherical ball is clipped in Choice of iglidur® ball materials Compensation of misalignment Light weight Universal corrosion resistance Standard spherical bearing: iglidur® W300

Material: Housing: igumid G page 983 Spherical ball: variable page 667

Technical Data Part number

Max. static tensile strength

Max. static radial load

Max. torque strength

Max. torque through balls

Short term Long term Short term Long term Inner threading Right-hand thread Left-hand thread

KCRM-06 KCRM-08 KCRM-10

KCLM-06 KCLM-08 KCLM-10

[N]

[N]

[N]

[N]

[Nm]

1,400 2,100 3,100

700 1,050 1,500

300 500 800

150 250 400

0.75 2 3

Standard

Weight

Standard

with MH[Nm] with MH[Nm]

10 12 20

15 40 50

[g]

4.2 7.6 12,8

Dimensions [mm] Part number

d1

d2

d3

W

B

C1

h1

I3

l4

Max. pivot angle

Right-hand thread Left-hand thread

KCRM-06

KCLM-06

6

20

M06

SW10

9.0

7

30

13.5

40

40°

KCRM-08 KCRM-10

KCLM-08 KCLM-10

8 10

24 30

M08 M10

SW13 SW15

12.0 14.0

9 10.5

36 43

17 22

48 58

35° 35°

For rod ends with metal insert please add MH to the part number, e. g. KCRM-10 MH (Inner-Ø: 10 mm).

delivery available time from stock

prices price list online www.igus.co.uk/en/kcrm

order Part number example KCRM-06

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 579

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with male thread: KARM and KALM

Standard design

Maintenance-free, self-lubricating High strength ander impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-restistant High vibration dampening capacity Suitable for rotating, oscillating, and linear movements Light weight Dimensional series K according to standard DIN ISO 12240 Available with metal sleeve for higher torque

Design with metal sleeve (MH)

Technical Data Part number

Max. static tensile strength

Max. static radial load

Right-hand thread Left-hand thread

Short term [N]

Long term [N]

Short term [N]

Long term [N]

[mm]

Outer threading [Nm]

KARM-05

KALM-05

800

400

80

40

13

0.4

5

12

2.7

KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-20 M20 KARM-22 KARM-25 KARM-30

KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-20 M20 KALM-22 KALM-25 KALM-30

100 200 300 300 400

50 100 150 150 200

15 18 20 20 22

0.5 2.0 5.0 3.0 6.0

10 12 20 20 30

15 40 50 50 70

3.9 7.1 12.5 12.5 18

22 25 26 26 29 32 32 34 39 46

6.0 12.0 17.0 17.0 20.0 25.0 25.0 25.0 45.0 85.0

30 35 40 40 45 55 55 60 65 70

70 75 110 110 150 200 200 – – –

18 25 34 34 45.9 58 58 86.2 99.1 160.4

1,000 500 1,700 850 2,500 1,250 2,500 1,250 2,700 1,350 2,700 3,400 3,900 3,900 4,200 6,000 6,000 7,200 7,500 8,800

1,350 1,700 1,950 1,950 2,100 3,000 3,000 3,600 3,750 4,400

400 200 700 350 800 400 800 400 1,000 500 1,300 650 1,300 650 1,500 750 1,900 950 2,300 1,150

Min. Max. torque thread strength depth Thread

580 Lifetime calculation, CAD files and much more support

Max. torque through ball

Weight

Standard Standard without MH with MH [Nm] [Nm]

[g]

www.igus.co.uk/en/karm

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with male thread: KARM and KALM

Order key

B C1

KA…M-05 Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (male thread) Series

l1

h

l2

d1

d2

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

d3

Dimensions [mm] Part number

d1

d2

d3

C1

B

h

l1

l2

Max. pivot angle

18 20 24 30 30 34 34 38 42 42 46 50 50 56 61 71

M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M18 x 1.5 M20 x 1.5 M20 x 2.5 M22 x 1.5 M24 x 2.0 M30 x 2.0

6.0 7.0 9.0 10.5 10.5 12.0 12.0 13.5 15.0 15.0 16.5 18.0 18.0 20.0 22.0 25.0

8.0 9.0 12.0 14.0 14.0 16.0 16.0 19.0 21.0 21.0 23.0 25.0 25.0 28.0 31.0 37.0

33 36 42 48 48 54 54 61 66 66 72 78 78 84 95 112

19 21 25 28 28 32 32 36 37 37 41 45 45 48 55 66

42 46 55 63 63 71 71 79 88 88 96 104 104 112 126 147

30° 29° 25° 25° 25° 25° 25° 25° 23° 23° 23° 23° 23° 22° 22° 22°

E10 Right-hand thread

Left-hand thread

KARM-05 KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-20 M20 KARM-22 KARM-25 KARM-30

KALM-05 KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-20 M20 KALM-22 KALM-25 KALM-30

5 6 8 10 10 12 12 14 16 16 18 20 20 22 25 30

For rod ends with metal insert please add MH to the part number, e. g. KARM-10 MH (Inner-Ø: 10 mm).

delivery available time from stock

prices price list online www.igus.co.uk/en/karm

order Part number example KARM-05

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 581

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends, male thread; 2nd generation: KARM CL B C1

Order key d1

d2

l2

KARM-06 CL l1

h

2nd Generation Dimension Metric Thread Housing (male thread) Series

d3

Male thread Smooth design has no dirt traps Compensation of misalignment Light weight Excellent corrosion resistance Design with metal sleeve for higher torque strength available Left-hand thread version KALM in preparation Standard spherical bearing: iglidur® W300

Material: Housing: igumid G page 983 Spherical ball: variable page 667

Technical data Part number

Max. static tensile strength

Max. radial load

Min. thread depth

Short term Long term Short term Long term [N] [N] [N] [N]

KARM-06 CL KARM-08 CL KARM-10 CL KARM-12 CL

Max. torque strength

Max. torque through ball

Weight

Thread [mm]

Outer threading [Nm]

Standard without MH [Nm]

Standard with MH [Nm]

[g]

1,000 1,700 2,500

500 850 1,250

100 200 300

50 100 150

15 18 20

0.5 2.0 5.0

10 12 20

15 40 50

3.5 6.2 11.2

2,700

1,350

400

200

22

6.0

30

70

15.6

Dimensions [mm] Part number

d1

d2

d3

C1

B

h

l1

l2

Max. pivot angle

E10

KARM-06 CL

6

20

M06

7.0

9.0

36

21

46

40°

KARM-08 CL KARM-10 CL KARM-12 CL

8 10 12

24 30 34

M08 M10 M12

9.0 10.5 12.0

12.0 14.0 16.0

42 48 54

25 28 32

55 63 71

35° 35° 35°

Rod ends can be ordered in metric dimensions with metal insert with the addition of MH after the part numbers listed here Part numbern, e. g. KARM-10 MH (Inner-Ø: 10 mm).

For another spherical bearing material please add J, R or X to the part number, e. g. KARM-10 CL J.

delivery available time from stock

prices price list online www.igus.co.uk/en/karm-cl

582 Lifetime calculation, CAD files and much more support

order Part number example KARM-06 CL www.igus.co.uk/en/karm-cl

My Sketches

igubal速 rod ends

igus速 (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 583

igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with female thread: EBRM and EBLM

Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements Light weight Dimensional series E according to standard DIN ISO 12240 50 % higher tensile force possible due to metal inlay (only dimension 16, more dimensions on request)

Technical Data Part number

Max. static tensile strength

Max. static radial load

Short term Long term Short term Long term

Min. thread depth

Max. torque Max. torque Weight strength through ball

Thread

Inner threading

Right-hand thread Left-hand thread

[N]

[N]

[N]

[N]

[mm]

[Nm]

[Nm]

[g]

EBRM-04 EBLM-04 EBRM-05 EBLM-05 EBRM-06 EBLM-06 EBRM-08 EBLM-08 EBRM-10 EBLM-10 EBRM-10 F EBLM-10 F EBRM-12 EBLM-12 EBRM-12 F EBLM-12 F EBRM-15 EBLM-15 EBRM-16 EBLM-16 EBRM-16 F EBLM-16 F EBRM-17 EBLM-17 EBRM-17 F EBLM-17 F EBRM-20 EBLM-20 EBRM-20 M20 EBLM-20 M20 EBRM-25 EBLM-25 EBRM-30 EBLM-30

800 1,300 1,500

400 650 750

100 150 200

50 75 100

7 8 8

0.4 0.5 1.5

2.0 2.0 2.5

1.8 3.2 4

2,000 2,300 2,300 3,300 3,300 4,800 5,000 5,000 5,300 5,300 7,200 7,200 10,000 10,500

1,000 1,150 1,150 1,650 1,650 2,400 2,500 2,500 2,650 2,650 3,600 3,600 5,000 5,250

450 500 500 550 550 800 850 850 1,100 1,100 1,800 1,800 2,600 3,000

225 250 250 275 275 400 425 425 550 550 900 900 1,300 1,500

11 13 13 14 14 18 18 18 19 19 22 22 27 33

5.0 15.0 6.0 20.0 15.0 25.0 20.0 15.0 30.0 27.5 60.0 60.0 115.0 130.0

7.0 14.0 14.0 25.0 25.0 30.0 32.0 32.0 35.0 35.0 40.0 40.0 55.0 70.0

6.9 11.2 11.2 17.1 17.1 28.9 32.6 32.6 42.4 42.4 65.8 65.8 125.9 184.1

Spherical ball material to choose J4VEM: clearance-free

page 667 JEM: low moisture absorption

REM: low-cost

584 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/ebrm

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: EBRM and EBLM B C1

d2

Order key

d1

EB…M-04

l3

h1

l4

Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

d3 W

d4 d5

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671 More spherical balls on request page 667

Dimensions [mm] Part number

d1

d2

d3

d4

d5

C1

B

– 11 13 16 19 19 22 22 26 – – 30 30 34 34 41 48

3.5 4.4 4.4 6.0 7.0 7.0 8.0 8.0 10.0 10.5 10.5 11.0 11.0 13.0 13.0 17.0 19.0

5 6 6 8 9 9 10 10 12 13 13 14 14 16 16 20 22

h1

l3

l4

W

E10 Right-h. thread

Max. pivot angle

Left-h. thread

EBRM-04 EBLM-04 EBRM-05 EBLM-05 EBRM-06 EBLM-06 EBRM-08 EBLM-08 EBRM-10 EBLM-10 EBRM-10 F EBLM-10 F EBRM-12 EBLM-12 EBRM-12 F EBLM-12 F EBRM-15 EBLM-15 EBRM-16 EBLM-16 EBRM-16 F EBLM-16 F EBRM-17 EBLM-17 EBRM-17 F EBLM-17 F EBRM-20 EBLM-20 EBRM-20 M20 EBLM-20 M20 EBRM-25 EBLM-25 EBRM-30 EBLM-30

4 5 6 8 10 10 12 12 15 16 16 17 17 20 20 25 30

delivery available time from stock

15 M04 – 19 M05 9.0 21 M06 11.0 24 M08 13.0 29 M10 15.0 29 M10 x 1.25 15.0 34 M12 18.0 34 M12 x 1.25 18.0 40 M14 21.0 43 M16 – 43 M16 x 1.5 – 46 M16 24.0 46 M16 x 1.5 24.0 53 M20 x 1.5 27.0 53 M20 x 2.5 27.0 64 M24 x 2.0 34.0 73 M30 x 2.0 41.0

prices price list online www.igus.co.uk/en/ebrm

22.5 9.5 30.0 SW08 30 12 39.5 SW09 30 8 40.5 SW11 36 14 48.0 SW14 43 18 57.5 SW17 43 18 57.5 SW17 50 20 67.0 SW19 50 20 67.0 SW19 61 26 81.0 SW22 64.5 26.5 86.0 SW22 64.5 26.5 86.0 SW22 67 27 90.0 SW27 67 27 90.0 SW27 77 31 103.5 SW30 77 31 103.5 SW30 94 38 126.5 SW36 110 47 146.5 SW41

33° 33° 27° 24° 24° 24° 21° 21° 21° 21° 21° 18° 18° 16° 16° 16° 13°

order Part number example EBRM-04

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 585

igubal速 rod ends

igubal速 Rod Ends | Product Range

Rod ends with male thread: EARM and EALM

Maintenance-free, dry-running High stiffness Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating, and linear movements Light weight Dimensional series E according to standard DIN ISO 12240

Technical Data Part number

Max. static tensile strength

Max. static radial load

Short term Long term Short term Long term Right-hand thread Left-hand thread

EARM-05 EARM-06 EARM-08 EARM-10

EALM-05 EALM-06 EALM-08 EALM-10

Min. thread depth

Max. torque Max. torque Weight strength through ball

Thread

Outer threading

[N]

[N]

[N]

[N]

[mm]

[Nm]

[Nm]

[g]

550 850 1,600 2,600

275 425 800 1,300

50 80 160 250

25 40 80 125

14 14 17 19

0.4 0.5 2.0 5.0

2.0 2.5 7.0 14.0

2.2 2.7 5.1 8.4

EARM-10 F

EALM-10 F

2,600

1,300

250

125

19

3.0

14.0

8.4

EARM-12 EARM-12 F EARM-15 EARM-17 EARM-17 F EARM-20 EARM-20 M20 EARM-25 EARM-30

EALM-12 EALM-12 F EALM-15 EALM-17 EALM-17 F EALM-20 EALM-20 M20 EALM-25 EALM-30

3,100 3,100 3,400 3,600 3,600 6,800 6,800 7,000 7,000

1,550 1,550 1,700 1,800 1,800 3,400 3,400 3,500 3,500

300 300 600 900 900 1,700 1,700 1,000 2,000

150 150 300 450 450 850 850 500 1,000

20 20 24 26 26 30 30 37 46

6.0 6.0 12.5 17.5 21.0 25.0 25.0 45.0 85.0

25.0 25.0 30.0 35.0 35.0 40.0 40.0 55.0 70.0

14.3 14.3 21.1 30.2 30.2 57.3 57.3 94.8 156.4

Spherical ball material to choose J4VEM: clearance-free preloaded

page 667 JEM: low moisture absorption

REM: Low-cost

586 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/earm

igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with male thread: EARM and EALM B C1

d2

Order key

EA…M-05

l1

h

l2

d1

Abmessung Metric Thread L = left-hand thread R = right-hand thread Housing (male thread) Series Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671 More spherical balls on request page 667

d3

Dimensions [mm] Part number

d1

d2

d3

C1

B

h

l1

l2

Max. pivot angle

19 21 24 29 29 34 34 40 46 46 53 53 64 73

M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M20 x 1.5 M20 x 2.5 M24 x 2.0 M30 x 2.0

4.4 4.4 6.0 7.0 7.0 8.0 8.0 10.0 11.0 11.0 13.0 13.0 17.0 19.0

6 6 8 9 9 10 10 12 14 14 16 16 20 22

36 36 41 47.5 47.5 54 54 63 69 69 80 80 97 113

20 20 24 27 27 29 29 34 37 37 43 43 53 65

45.5 46.5 53.0 62.0 62.0 71.0 71.0 83.0 92.0 92.0 106.5 106.5 129.0 149.5

33° 27° 24° 24° 24° 21° 21° 21° 18° 18° 16° 16° 16° 13°

E10 Right-hand thread Left-hand thread

EARM-05 EARM-06 EARM-08 EARM-10 EARM-10 F EARM-12 EARM-12 F EARM-15 EARM-17 EARM-17 F EARM-20 EARM-20 M20 EARM-25 EARM-30

EALM-05 EALM-06 EALM-08 EALM-10 EALM-10 F EALM-12 EALM-12 F EALM-15 EALM-17 EALM-17 F EALM-20 EALM-20 M20 EALM-25 EALM-30

delivery available time from stock

5 6 8 10 10 12 12 15 17 17 20 20 25 30

prices price list online www.igus.co.uk/en/earm

order Part number example EARM-05

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 587

igubal® rod ends

igubal® Rod Ends | Product Range

High temperature rod ends with female thread: EBRM-HT and EBLM-HT

Order key

B C1

d2

d1

EB…M-05-HT

h1

l4

High Temperature Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

l3

50° d3 W

d4 d5

For temperatures up to +200 °C Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements Light weight

Material: Housing: iguton G page 983 Spherical ball: iglidur® X page 673

Dimensions [mm] Part number

d1

d2

d3

d4

d5

C1

B

h1

l3

l4

W

E10 Right-hand thread

Max. Weight pivot angle [g]

Left-hand thread

EBRM-05-HT EBLM-05-HT

5

19

M05 9.0

11

4.4

6

30

12 39.5 SW09

33°

3.8

EBRM-06-HT EBRM-08-HT EBRM-10-HT EBRM-12-HT

6 8 10 12

21 24 29 34

M06 M08 M10 M12

13 16 19 22

4.4 6.0 7.0 8.0

6 8 9 10

30 36 43 50

12 16 18 20

27° 24° 24° 21°

5 8.5 13.7 21.4

EBLM-06-HT EBLM-08-HT EBLM-10-HT EBLM-12 HT

delivery available time from stock

11.0 13.0 15.0 18.0

prices price list online www.igus.co.uk/en/ebrm-ht

588 Lifetime calculation, CAD files and much more support

40.5 48.0 57.5 67.0

SW11 SW14 SW17 SW19

order Part number example EBRM-05 HT www.igus.co.uk/en/ebrm-ht

igubal® rod ends

igubal® Rod Ends | Product Range High temperature rod ends with male thread: EARM-HT and EALM-HT B C1

Order key

EA…M-05-HT

d1

d2

l1

h

l2

High Temperature Dimension Metric Thread L = left-hand thread R = right-hand thread Housing (male thread) Series

d3

For temperatures up to +200 °C Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements Light weight Dimensional series K according to standard DIN ISO 12240

Material: Housing: iguton G page 983 Spherical ball: iglidur® X page 673

Dimensions [mm] Part number

d1

d2

d3

C1

B

h1

l1

l2

19 21 24 29 34

M05 M06 M08 M10 M12

4.4 4.4 6.0 7.0 8.0

6 6 8 9 10

36 36 41 47.5 54

20 20 24 27 29

45.5 46.5 53.0 62.0 71.0

E10 Right-hand thread

Left-hand thread

EARM-05-HT EARM-06-HT EARM-08-HT EARM-10-HT EARM-12-HT

EALM-05-HT EALM-06-HT EALM-08-HT EALM-10-HT EALM-12-HT

delivery available time from stock

5 6 8 10 12

prices price list online www.igus.co.uk/en/earm-ht

Max. Weight pivot angle [g] 33° 27° 24° 24° 21°

2.8 3.4 6.1 10.2 15.7

order Part number example EARM-05 HT

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 589

igubal速 rod ends

igubal速 Rod Ends | Product Range | Inch

Rod ends with female thread: KBRI and KBLI

Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating, and linear movements Light weight

Technical Data Part number

Max. static tensile strength

Max. radial load

Short term Long term Short term Long term Right-hand thread Left-hand thread

KBRI-03 KBRI-04 KBRI-05 KBRI-06 KBRI-07 KBRI-08 KBRI-10 KBRI-12 KBRI-16

KBLI-03 KBLI-04 KBLI-05 KBLI-06 KBLI-07 KBLI-08 KBLI-10 KBLI-12 KBLI-16

Min. thread depth

Max. torque strength

Thread

Inner threading

Max. Weight torque through ball

[N]

[N]

[N]

[N]

[Inch]

[Nm]

[Nm]

[g]

900 1,100 1,700 2,000 2,300 2,600 4,900 5,600 6,000

450 550 850 1,000 1,150 1,300 2,450 2,800 3,000

300 400 500 1,000 1,200 1,500 1,700 2,300 2,600

150 200 250 500 600 750 850 1,150 1,300

.350 .480 .480 .568 .655 .743 .962 1.093 1.488

2 5 6 7 18 23 30 40 46

3 4 10 15 25 35 50 70 85

3.3 5.1 7.1 12.6 16.1 26.5 38.7 54.4 197.5

590 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/kbri

igubal® rod ends

igubal® Rod Ends | Product Range | Inch Rod ends with female thread: KBRI and KBLI B C1

d2

Order key

KB…I-03

l3

h1

l4

d1

Dimension Inch Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

d3 W

d4 d5

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [Inch] Part number

d1

d2

d3

d4

C1

B

h1

l3

l4

W

Max. pivot angle

.406

.246

.312

1.062

.500

1.374

.312

25°

.469 .272 .365 .500 .340 .437 .687 .394 .500 .750 .456 .562 .875 .487 .625 1.000 .545 .750 1.125 .676 .875 1.625 1.000 1.375

1.312 1.375 1.625 1.812 2.125 2.500 2.875 4.125

.687 .687 .812 .937 1.062 1.375 1.562 2.125

1.687 .375 1.813 .437 2.125 .562 2.374 .625 2.781 .750 3.250 .875 3.750 1.000 5.500 1.500

25° 25° 22° 22° 22° 22° 22° 20°

E10

Right-h. thread Left-h. thread

KBRI-03

KBLI-03

.1900

.625

10-32

KBRI-04 KBRI-05 KBRI-06 KBRI-07 KBRI-08 KBRI-10 KBRI-12 KBRI-16

KBLI-04 KBLI-05 KBLI-06 KBLI-07 KBLI-08 KBLI-10 KBLI-12 KBLI-16

.2500 .3125 .3750 .4375 .5000 .6250 .7500 1.0000

.750 .875 1.000 1.125 1.312 1.500 1.750 2.750

1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 3/4-16 1-12

delivery available time from stock

prices price list online www.igus.co.uk/en/kbri

order Part number example KBRI-03

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 591

igubal速 rod ends

igubal速 Rod Ends | Product Range | Inch

Rod ends with male thread: KARI and KALI

Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating, and linear movements Light weight

Technical Data Part number

Max. static tensile strength

Max. radial load

Min. thread depth

Short term Long term Short term Long term Right-hand thread Left-hand thread

KARI-03 KARI-04 KARI-05 KARI-06 KARI-07 KARI-08 KARI-10 KARI-12 KARI-16

KALI-03 KALI-04 KALI-05 KALI-06 KALI-07 KALI-08 KALI-10 KALI-12 KALI-16

Max. torque strength

Max. Weight torque through ball

Outer threading

[N]

[N]

[N]

[N]

[Inch]

[Nm]

[Nm]

[g]

390 900 1,100 1,500 2,000 2,500 3,500 3,900 4,400

200 450 550 750 1,000 1,250 1,750 1,950 2,200

70 100 150 350 400 450 600 1,000 1,300

35 50 75 175 200 225 300 500 650

.525 .700 .875 .875 .962 1.050 1.137 1.226 1.488

0.5 1.0 2.0 3.0 6.0 9.0 12.0 25.0 45.0

3 4 10 15 25 35 50 70 85

2.1 3.5 6 8.8 12.4 18.5 27.6 42.8 143.3

592 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/kari

igubal® rod ends

igubal® Rod Ends | Product Range | Inch Rod ends with male thread: KARI and KALI

Order key

KA…I-03 Dimensions Inch Thread L = left-hand thread R = right-hand thread Housing (male thread) Series Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [Inch] Part number

d1

d2

d3

C1

B

h

l1

l2

Max. pivot angle

.312 .365 .437 .500 .562 .625 .750 .875 1.375

1.250 1.562 1.875 1.938 2.125 2.428 2.625 2.875 4.125

.750 1.000 1.250 1.250 1.375 1.500 1.625 1.750 2.350

1.563 1.937 2.313 2.438 2.688 2.094 3.375 3.750 5.500

25° 25° 25° 22° 22° 22° 22° 22° 20°

E10 Right-hand thread Left-hand thread

KARI-03 KARI-04 KARI-05 KARI-06 KARI-07 KARI-08 KARI-10 KARI-12 KARI-16

KALI-03 KALI-04 KALI-05 KALI-06 KALI-07 KALI-08 KALI-10 KALI-12 KALI-16

delivery available time from stock

.1900 .2500 .3125 .3750 .4375 .5000 .6250 .7500 1.0000

.625 10-32 .234 .750 1/4-28 .250 .875 5/16-24 .312 1.000 3/8-24 .359 1.125 7/16-20 .406 1.312 1/2-20 .453 1.500 5/8-18 .484 1.750 3/4-16 .593 2.750 1-12 1.000

prices price list online www.igus.co.uk/en/kari

order Part number example KARI-03

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 593

igubal速 rod ends

igubal速 Rod Ends | Product Range | Inch

Rod ends with female thread: EBRI and EBLI

Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt, dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements Light weight Dimensional series K according to standard DIN ISO 12240

Technical Data Part number

Max. static tensile strength

Max. radial load

Short term Long term Short term Long term Right-hand thread Left-hand thread

EBRI-03 EBRI-04 EBRI-05 EBRI-06 EBRI-07 EBRI-08 EBRI-10 EBRI-12

EBLI-03 EBLI-04 EBLI-05 EBLI-06 EBLI-07 EBLI-08 EBLI-10 EBLI-12

Min. thread depth

Max. torque strength

Weight

Inner threading

Max. torque through ball

Thread

[N]

[N]

[N]

[N]

[Inch]

[Nm]

[Nm]

[g]

1,300 1,500 2,000 2,300 3,300 3,300 5,000 7,200

650 750 1,000 1,150 1,650 1,650 2,500 3,600

150 200 450 500 550 550 850 1,800

75 100 225 250 275 275 425 900

.315 .315 .433 .512 .551 .551 .709 .866

2 5 6 7 18 23 30 40

2.0 2.5 7.0 14.0 25.0 25.0 32.0 40.0

3,1 3,8 6.9 11.5 17.6 18.1 31.9 61.5

594 Lifetime calculation, CAD files and much more support

www.igus.co.uk/en/ebri

igubal® rod ends

igubal® Rod Ends | Product Range | Inch Rod ends with female thread: EBRI and EBLI B C1

d2

Order key

d1

EB…I-03

h1

l4

Dimensions Inches Thread L = left-hand thread R = right-hand thread Housing (female thread) Series

l3

50°

d3 W

d4 d5

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 671

Dimensions [Inch] Part number

d1

d2

d3

d4

d5

C1

B

0.748 0.827 0.945 1.142 1.339 1.339 1.693 2.087

10–32 1/4–28 5/16–24 3/8–24 7/16–20 1/2–20 5/8–18 3/4–16

0.3543 0.4331 0.5118 0.5906 0.7087 0.7087 – 1.0630

0.4331 0.5118 0.6299 0.7480 0.8661 0.8661 – 1.3386

0.1732 0.1732 0.2362 0.2756 0.3150 0.3150 0.4134 0.5118

0.1900 0.2500 0.3125 0.3750 0.4063 0.4063 0.5000 0.6250

E10 Right-h. thread Left-h. thread

EBRI-03 EBRI-04 EBRI-05 EBRI-06 EBRI-07 EBRI-08 EBRI-10* EBRI-12

EBLI-03 EBLI-04 EBLI-05 EBLI-06 EBLI-07 EBLI-08 EBLI-10* EBLI-12

0.1900 0.2500 0.3125 0.3750 0.4375 0.5000 0.6250 0.7500

Part number

h1

I3

W

Max. pivot angle

0.4724 0.4724 0.6299 0.7087 0.7874 0.7874 1.0433 1.2205

0.35 0.43 0.55 0.67 0.75 0.75 0.87 1.18

30° 25° 22° 22° 18° 18° 16° 14°

E10 Right-hand thread

Left-hand thread

EBRI-03 EBRI-04 EBRI-05 EBRI-06 EBRI-07 EBRI-08 EBRI-10* EBRI-12

EBLI-03 EBLI-04 EBLI-05 EBLI-06 EBLI-07 EBLI-08 EBLI-10* EBLI-12

1.1811 1.1811 1.4173 1.6929 1.9685 1.9685 2.5394 3.0315

* EBRI-10/EBLI-10 special form with hexagonal foot

delivery available time from stock

prices price list online www.igus.co.uk/en/ebri

order Part number example EBRI-03

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 595

igubal® rod ends

igubal® Rod Ends | Product Range

Angle joint for rotating and pivoting motions: WGRM and WGLM

d4

Order key

1

ød

WG...M-05 Dimension Metric Thread L = left-hand thread R = right-hand thread Housing Angle joint

d2

h2

l1

S1

l5 e

d4

S2

S2

l6

l2

d4

b

d4

h1

h2

l1 d2

h3

l6

l2

l6

Connection for rotating and swivelling movements Light weight and robust Easy and quick assembly Vibration-dampening Insensitive to dirt and dust l2

h2

l1

1

ød

h3

l5

Material: e 1 Housing: igumid G page 983 ød Spherical cap: iglidur® W300 page 131 d2

a

h1

S1

l5 e

S1

d4

d2

Technical Data Part number

Max. axial tensile force

Max. axial compressive force

Max. axial tensile force

(Ball stud axis*)

(Ball stud axis)

(Housing axis)

Short time Long term Short term Long term Short term Long term Right-h. thread Left-h. thread

WGRM-05 WGRM-06 WGRM-08 WGRM-10

WGLM-05 WGLM-06 WGLM-08 WGLM-10

Max. axial tensile Weight force in housing axis, with metal ball stud Short term

Long term

[N]

[N]

[N]

[N]

[N]

[N]

[N]

[N]

[g]

30 35 250 250

15 17.5 125 125

200 300 500 900

100 150 250 450

100 140 200 400

50 70 100 200

600 800 1,500 1,900

300 400 750 950

2.6 3.8 8 13.7

* MS = metal stud; e.g.: WGRM-05 MS

Dimensions [mm] Part number

d4

l1

l2

+0.1

d1

+0.5

+0.2

+0.3

Right-hand threadLeft-hand thread

–0.1

–0.5

–0.2

–0.3

WGRM-05 WGRM-06 WGRM-08 WGRM-10

8.0 M5 10.0 M6 13.0 M8 16.0 M10

WGLM-05 WGLM-06 WGLM-08 WGLM-10

delivery available time from stock

d2

l5

l6

h3

a

b

e

+0.5

+0.3

+0.5

+0.5

–0.5

–0.3

–0.5

–0.5

12.8 9.0 10.2 14.0 8.2 25.6 22.0 14.8 11.0 12.5 16.0 10.5 30.9 25.0 19.3 13.0 16.5 18.0 13.5 38.8 30.0 24.0 16.0 20.0 20.0 16.0 47.0 35.0

28.4 32.4 39.7 47.0

11.0 13.0 16.0 18.0

Min.

prices price list online www.igus.co.uk/en/wgrm

596 Lifetime calculation, CAD files and much more support

S1

Max. pivot angle

SW 8 SW 9 SW12 SW14

25° 25° 25° 25°

order Part number example WGRM-05 www.igus.co.uk/rod-end

igubal® rod ends

igubal® Rod Ends | Product Range Ball and socket joint (low-cost): WGRM LC and WGLM LC

Order key

WG...M-05 LC Low-cost Dimension Metric Thread L = left-hand thread R = right-hand thread Angle joint

Dimensions as WGRM LC (low-cost) version is a two piece assembly with either a plastic or metal stud Low weight Maintenance-free Plastic stud for lowest price, metal stud for highest load

Material: Housing: igumid G

page 983

Technical Data Part number

Max. axial tensile force

Max. axial compressive force

Max. axial tensile force

(Ball stud axis*)

(Ball stud axis)

(Housing axis)

Max. axial tensile Weight force in housing axis, with metal ball stud

Short time Long term Short term Long term Short term Long term Short term Right-h. thread

WGRM-05 LC WGRM-06 LC WGRM-08 LC WGRM-10 LC

Left-h. thread

WGLM-05 LC WGLM-06 LC WGLM-08 LC WGLM-10 LC

Long term

[N]

[N]

[N]

[N]

[N]

[N]

[N]

[N]

[g]

30 35 250 250

15 17.5 125 125

200 300 500 900

100 150 250 450

100 140 200 400

50 70 100 200

600 800 1,500 1,900

300 400 750 950

2.6 4 8.2 13.8

* MS = metal stud; e.g.: WGRM-05 LC MS

Dimensions [mm] – technical drawing Part number Right-h. thread Left-h. thread

d1

d2

d4

page 596 l1

l2

+0.1

+0.5 +0.2 +0.3

–0.1

–0.5

WGRM-05 LC WGLM-05 LC 8.0

–0.2

–0.3

l5

l6

h1

h2

h3

+0.4 +0.5 +0.5 Min. –0.4

–0.5

–0.5

S1

a

b

e

Piv. angle

+0.3 +0.5 +0.5 Recom. Max. –0.3

–0.5 –0.5

M5 12.8 9.0 10.2 14.0 8.2 10.8 0.65 25.6 SW 8 22.0 28.4 11,0 18 °

25°

WGRM-06 LC WGLM-06 LC 10.0 M6 14.8 11.0 12.5 16.0 10.5 12.3 0.70 30.9 SW 9 25.0 32.4 13,0 18 ° WGRM-08 LC WGLM-08 LC 13.0 M8 19.3 13.0 16.5 18.0 13.5 16.2 1.15 38.8 SW 12 30.0 39.7 16,0 18 ° WGRM-10 LC WGLM-10 LC 16.0 M10 24.0 16.0 20.0 20.0 16.0 20.0 1.15 47.0 SW 14 35.0 47.0 18,0 18 °

25° 25° 25°

delivery available time from stock

prices price list online www.igus.co.uk/en/wgrm-lc

order Part number example WGRM-05 LC

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 597

igubal® rod ends

igubal® Rod Ends | Product Range

Axial joint: AGRM and AGLM S1 d2

Order key

AG...M-08

h3

b

a

e

d4

Dimension Metric Thread L = left-hand thread R = right-hand thread Axial joint

l2

l6

l1

ød1

d2

S2

For all mechanical combinations Very easy hand assembly Maintenance-free and predictable Corrosion-resistant Chemical-resistant Good vibration-dampening qualities

Material: Housing: igumid G page 983 Spherical cap: iglidur® W300 page 131

Technical data Part number

Max. static axial tensile force

Right-hand thread

Left-hand thread

AGRM-08

AGLM-08

Max. static axial compressive force

Max. assembling force

Weight

Short term

Long term

Short term

Long term

[N]

[N]

[N]

[N]

[N]

[g]

250

125

1,000

500

110

7.8

Dimensions [mm] Part number

d1

d2

d4

l1

l2

l6

h3

S1

S2

a

b

+0.5

+0.3

+0.5

–0.5

–0.3

–0.5

e

+0.1

+0.5

+0.2

+0.3

Right-hand thread Left-hand thread

–0.1

–0.5

–0.2

–0.3

AGRM-08

13.0 M8 19.3 13.0 16.5 13.5 59.0 SW12 SW11 29.5 36.5 16.0

AGLM-08

delivery available time from stock

Min.

prices price list online www.igus.co.uk/en/agrm

598 Lifetime calculation, CAD files and much more support

Pivot angle

Min. Recom. Max.

18 °

25°

order Part number example AGRM-08 www.igus.co.uk/rod-end

NEW in this catalog! ®

igubal® rod ends

igubal Rod Ends | Product Range Axial joint: AGRM LC and AGLM LC

Order key

AG...M-06 LC Low-cost Dimension Metric Thread L = left-hand thread R = right-hand thread Axial joint

Dimensions as AGRM

S1 d4

d2

page 983

b

a

e

Material: Housing: igumid G

h3

LC (low-cost) version is a two piece assembly with either a plastic or metal stud Low weight Maintenance-free Plastic stud for lowest price, metal stud for highest load

l6

l2

l1

d1

S2 d2

Technical Data Part number

Max. static axial tensile force

Max. static axial compressive force

Short term

Long term

Short term

Long term

Weight

Right-hand thread

Left-hand thread

[N]

[N]

[N]

[N]

[g]

AGRM-06 LC

AGLM-06 LC

100

50

2,000

1,000

10.8

* MS = metal stud; e.g.: AGRM-06 LC MS

Dimensions [mm] Part number

d1

d2

d4

l1

l2

+0.1

+0.5

+0.2

+0.3

Right-hand thread

Left-hand thread

–0.1

–0.5

–0.2

–0.3

AGRM-06 LC

AGLM-06 LC

10.0

delivery available time from stock

M6

l6 Min.

h3

S1

S2

a

b

+0.5

+0.3

+0.5

–0.5

–0.3

–0.5

e Min.

14.8 11.0 11.25 7.25 47.25 SW9 10.0 25.0 29.9 13.0

prices price list online www.igus.co.uk/en/agrm-lc

order Part number example AGRM-06 LC

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 599

igubal® rod ends

igubal® Rod Ends | Product Range

Adapter bolt: PKRM and PKLM d1

Order key

l1

l4

PK…M-06

l3

l2

Dimension Metric Thread L = left-hand thread R = right-hand thread Series K Adapter bolt

d3

Material: POM page 984

SW

Solid polymer bolts with a hexagonal head are an accessory to the series K rod ends. The plain shank fits into the inside diameter of the spherical ball and is secured by a circlip. The igubal® adapter bolts consist of highly shock-resistant, longfibre reinforced polymer POM.

Lightweight Excellent corrosion resistance Designed for use with K series rod ends High strength under impact loads Vibration-dampening Easy to fit Available in left- and right-hand threads

Technical Data and Dimensions [mm] Part number

Max. static Max. static tensile strength radial load

Right-h. thread Left-h. thread

PKRM-05 PKRM-06 PKRM-08 PKRM-10 PKRM-12 PKRM-14 PKRM-16 PKRM-18 PKRM-20

PKLM-05 PKLM-06 PKLM-08 PKLM-10 PKLM-12 PKLM-14 PKLM-16 PKLM-18 PKLM-20

Short term

Long term

Short term

Long term

[N]

[N]

[N]

[N]

100 150 250 500 700 800 900 800 500

50 75 125 250 350 400 450 400 250

delivery available time from stock

200 100 250 125 400 200 600 300 900 450 1,100 550 1,400 700 1,700 850 2,200 1,100

d1

h11

d3

l1

l4

l3

l2

Connection Total Length Thread Nut Thread length adjusting length width bolt

5 M05 6 M06 8 M08 10 M10 12 M12M 14 14M 16 16M 18 M18 x 1.5 20 M20 x 1.5

25.0 28.0 32.0 37.5 42.0 47.0 52.0 59.0 67.0

prices price list online www.igus.co.uk/en/pkrm

600 Lifetime calculation, CAD files and much more support

8.5 9.5 12.5 14.5 16.5 19.5 22.0 24.0 26.0

11.3 2.7 12.8 3.2 12.5 4.0 14.5 5.0 15.5 6.0 15.5 7.0 16.5 8.0 20.5 9.0 25.0 10.0

SW

Weight

Width across flats

[g]

8 10 13 16 18 21 24 27 30

0.7 1.2 2.6 4 7.5 11.4 16.9 16.9 34.4

order Part number example PKRM-06 www.igus.co.uk/rod-end