001_2_83_84_omslag.indd 1
03-12-13 13:21
Oil • Gas • Petrochemical • Power • Cleantech
FME Energy guide 2014 - 2015
H EDITION
CLEANTEC
2014 - 2015
FME Energy guide Oil • Gas • Petrochemical • Power • Cleantech achtergrond_groen.indd 1
18-11-13 10:02
001_2_83_84_omslag.indd 2
03-12-13 13:22
Power Piping International BV is a manufacturer and supplier of a complete range of pipe supporting for all types of piping systems.The manufacturing facility is strategically located in Moergestel, The Netherlands directly on the A58 highway between the ports of Rotterdam and Antwerp. We are specialised in the manufacture and supply of insulated pipe supports for low temperature piping systems and insulated pipesupports for high temperature piping systems. Our Quality Management System has been audited and meets the ISO9001:2000 standards. • • • •
POWERFOAM™ HD PUF cryogenic pipe supports POWERFOAM™ HD PUF cryogenic anchors Timtherm® hot pipe supports Permali pipe supports
A modern manufacturing facility, a knowledgeable engineering department, years of experience and an innovative team support our activities. Short communication lines guarantee a quick and responsive supplier. Power Piping International BV, P.O. Box 464, 5000 AL Tilburg, The Netherlands Ind. Estate De Sonman, De Sonman 15, 5066 GJ Moergestel, The Netherlands Telephone: +31 13 595 29 23, Fax: +31 13 595 29 24, E-mail: info@powerpiping.nl www.powerpiping.nl
Engineering, manufacturing and commissioning of industrial burner systems. . Engineering, manufacturing and commissioning of industrial burner systems.
p75_powerpiping.indd 1 1 p71_powerpiping.indd
02-04-12 11:21 09-03-2011 10:20:39
Foreword The Netherlands increasingly exerts significant influence on the development of new energy technologies. Whether it concerns gas, petro chemistry or sustainable energy: the Dutch industry takes the lead in innovations and smart solutions for complex issues.
extraction are continuously developed for sustainable solutions. FME member Petrogas has, for instance, developed a method to gain fuel from plastic. The application of oil and gas solutions in large offshore wind projects is also being investigated.
This is mainly due to the fine Dutch knowledge infrastructure and the excellent collaboration between industry and knowledge institutes, such as TNO and KEMA. Companies and knowledge institutions effortlessly find one another to create innovative solutions. Companies also increasingly often work together in clusters, and therefore suppliers of partial solutions work together on total solutions. Combining forces takes centre stage.
We have collected all these Dutch innovation champions in this FME Energy Guide, in which they will further introduce themselves to you. I would like to invite you to become better acquainted with these companies that we, as FME, are exceptionally proud of.
Another element is most certainly the geographical position of The Netherlands. New maritime solutions for oil and gas are being worked on daily in the Rotterdam port area. This knowledge and these skills are now being used worldwide. Moreover, Dutch ports are an important base camp for increasing offshore activities in the North Sea, which also boost further innovation.
Ineke Dezentjé Hamming-Bluemink President FME-CWM Association FME-CWM Association FME-CWM is the Dutch association of enterprises in the technological sector. The organisation represents 2,400 members in the metal, plastic, electronics and electrical engineering industries. These enterprises together employ a workforce of 225,000 in total. Joint annual turnover of member companies amounts to around € 60 billion euro with a direct export totalling at € 36 billion. We actively protect our members’ interests nationally and internationally, provide
The Dutch energy industry is highly focused on the future. Existing technologies for conventional energy
services to individual member companies and clusters of member companies, and support 105 trade associations. FME ENERGY GUIDE 2014-2015
003_B_voorwoord.indd 3
3
03-12-13 14:50
Components for air-cooled heat exchangers, engineered-to-order; (on-site) assembly and maintenance. ENGINEERING Our engineers and technicians tailor air cooler components, including drives and fan configurations, to suit specific site conditions. FAN HOUSINGS with aerodynamic elliptical inlet bell, up to 7300 mm diameter in steel, larger sizes in FRP. BEARING BLOCKS for motors from 5 to 90 kW, designed for prevention of alignment errors and minimum maintenance (lubrication interval up to 32000 hours). LOUVRE DAMPERS individual units up to 3500 mm width and 7500 mm length; combinations for larger surfaces, in aluminium or steel, with manual, pneumatic or electric actuator. PLENUMS AND ASSEMBLY design and construction of plenums and support structure in a variety of materials; assembly and test running of complete installations, including dynamic balancing of the fans. ON-SITE MAINTENANCE service on drive components and fans by experienced field technicians.
More than 50 years of skilled know-how Our values: • solid engineering advice • quality products • on-time performance ISO certifi cation 9001:2008 SCC*/VCA* Rev.2008
004_geha.indd 1
We are ready to be of service. Our goal: long-term, mutually beneficial business relationships Please visit our website www.geha-holland.nl
Machinefabriek en Apparatenbouw Geha b.v. Veilingstraat 52, NL - 7833 HN Nieuw-Amsterdam Phone: +31 (0) 591 307050 Fax: +31 (0) 591 553781 E-mail: info@geha-holland.nl
28-11-13 11:54
3
The Netherlands increasingly exerts significant influence on the development of new energy technologies. Whether it concerns gas, petro chemistry or sustainable energy: the Dutch industry takes the lead in innovations and smart solutions for complex issues. The Netherlands is a small nation with relatively few energy resources. For quite some time we have been dealing with the challenges the world now faces when it comes to energy. It was therefore no surprise to see that a Dutch company is actively involved with cleantech developments in the US.
7
9
When a Dutch company gains the exclusive right to be the worldwide supplier of a unique product, then this says something about the relationship, about craftsmanship and trust. In the years to come, Petrogas from Gouda will be manufacturing installations for the Swiss Diesoil, in which diesel is produced from plastic.
Content
3
Foreword by Ineke DezentjĂŠ-Hamming-Bluemink President FME-CWM Association
7
Made in the World by Manon Janssen Chairman of the Dutch Top Sector Energy
Cleantech 7 Efficiency as a product 3 Cleantech Holland
9
Efficiency through craftsmanship
11
Dutch suppliers in the oil, gas and power industry acting in a cluster
13
Energy Guide Company Profiles
59
Energy Guide Supplier Matrix
67
Register, Advert Index
FME ENERGY GUIDE 2014-2015
5
18-11-13 10:02
005_C_inhoud.indd 5
03-12-13 13:23
Stanislav Yudin
Oleg Strashnov
Two vessels - one force We offer tailored ePCi & t&i solutions:
Renewables EPCI and T&I
Oil & Gas T&I
Substations
Platforms
Wind Turbine Generators
Deepwater structures
Foundations
Platform decommissioning
Cables
c/o Albert Einsteinlaan 50 w w w. s h l . c o m . c y
WindandWaves11.indd 006_seaway.indd 1 1
| 2719 ER Zoetermeer
| The Netherlands
| Phone: +31 79 363 77 00
A S U B S E A 7 J O I N T V E N T U R E C O M PA N Y
15-8-2013 17:51:00 28-11-13 11:54
Made in the World Recently I visited the United States as member of a trade mission with the Dutch Minister for the Environment. During one of the tours in a cleantech company in California, we noticed that the main piece of equipment used was manufactured in The Netherlands. While we were there to see the innovations the Americans develop, it turned out that the Dutch were empowering them in their cause. The Netherlands is a small nation with relatively few energy resources. For quite some time we have been dealing with the challenges the world now faces when it comes to energy. It was therefore no surprise to see that a Dutch company is actively involved with cleantech developments in the US. As a trading nation, the Dutch also know the importance of innovation. Today’s global economy is all about what you bring to the table: new products, ideas and concepts. For the Dutch energy sector this translates into products and services that are more energy efficient, more sustainable and integrate various energy resources. These solutions are not limited to the Dutch needs, but can be applied worldwide. The energy sector is one of the Dutch economy’s leading sectors. Thanks to a spirit of enterprise and innovation this sector provides tens of thousands of jobs occupying a strong position in Europe. The research and development activities in the sector are streamlined by the so-called ‘Top Sector approach’. Stimulated and backed by the government, the Dutch research
institutions and private companies have developed an unprecedented joined R&D agenda. This agenda brings all the necessary knowledge and resources together. All projects on this agenda have been documented in Innovation Contracts and Green Deals to make sure all parties contribute and make progress. The Top Sector Energy is committed to the development of clean technology. Energy companies invest about 4,9 billion euro. On top of that, the 380 companies and research institutions involved in the Top Sector Energy invest about 275 million euro’s each year. This money is used to collaborate in areas such as wind, solar, gas, bio-energy and energy efficiency in cities and industry. The final research area is the distribution of energy using smart grids. These investments also address the non-technical innovations needed, such as the training of highly skilled people and empowering consumers to be actively involved in their energy supply. The Dutch are ‘one to watch’ when it comes to cleantech. This energy guide gives an impression of our collective knowledge and experience. However, the best is yet to come if we are able to team up with you, the entrepreneurs, suppliers, and researchers from across the globe. Let’s join forces and innovate together under the joint label ‘Made in the World’.
Manon Janssen Chairman of the Dutch Top Sector Energy FME ENERGY GUIDE 2014-2015
007_F_topsector.indd 7
7
03-12-13 13:24
Born from the IndustrIal revolutIon
leadIng the energy evolutIon
Designed to exceed the rigorous critical stand-by power requirements of the Oil, Gas and Petrochemical industry in both off-shore and on-shore applications. Our AC and DC UPS systems and site services provide customizable solutions to meet your individual project requirements. By combining both innovative industrial UPS-systems with excellent customer services, AEG Power Solutions enables you to maximize your up-time and efficiency whilst minimizing your life cycle operating costs.
sales.nl@aegps.com www.aegps.com
008_AEG.indd 1
28-11-13 11:54
Efficiency through craftsmanship When a Dutch company gains the exclusive right to be the worldwide supplier of a unique product, then this says something about the relationship, about craftsmanship and trust. In the years to come, Petrogas from Gouda will be manufacturing installations for the Swiss Diesoil, in which diesel is produced from plastic. Dutch company Petrogas engineers, calculates and builds installations for the gas industry. The company became successful working for, amongst others, the Dutch Gasunie and now globally provides expertise and products, for instance, for the treatment of natural gas, oil and nitrogen. Installations that convert plastic waste into diesel will be added to this list in the following years.
erated, which covers the processes’ heat and energy production. Edwin Hoogwerf, Sales Director at Petrogas, explains: ‘It may seem too good to be true, but this is proven technology. Our engineers worked at the Swiss pilot plant for several weeks, where 300 kilograms are processed each hour. They witnessed and calculated that the process runs both efficiently and balanced.’
Waste plastic of the right composition can be sorted and cracked in a specifically designed process. The product that is released in this process condenses, and it becomes diesel. The by-products that do not condense, the so-called non-condensables, are incinerated in the incinerators that provide the heat for the process. The raw material for this process is plastic made from oil product. Plastic waste can be mechanically sorted into usable and unusable material. One kilogramme of plastic waste yields one litre of diesel. This manner of recycling is cost efficient and upgrades the value chain, which now runs from oil to plastic to diesel.
There is plenty of plastic waste. Usage and recycling is well-organised in the Netherlands and Belgium, but the landfill sites in countries such as India are filled with waste that includes a substantial amount of plastic. This waste can be efficiently divided into biocomponents and plastics. Waste all of a sudden becomes valuable, as approximately 55% of the plastic can be used for recycling. 45% may be unsuitable for recycling, but is suitable for making diesel. The fuel from the pilot plant complies with the European EN590 standard for diesel. The process is still being further optimised. Efficiently managing the cracking process will result in better specifications of the end product. This will have a huge impact on recycling plastics and on the environment. Such a change takes time, and investors must opt for long-term. Nevertheless, a new factory for 15,000 tons per year costs 24 million Euros, with already a return on investment of approximately 16%. As soon as the quality of the diesel improves and the product is certified, the value quickly rises and the payoff times decrease.
The patent for this process belongs to the Swiss company Diesoil. This enterprise has already been using a functioning pilot plant in Sihlbrugg, Switzerland for five years. The process is now being scaled up and the company markets plants with an annual capacity of 15,000 tons. The first commercial, large-scale application will be located in the German Grossenhain. This factory should be operational by the end of 2014 / beginning of 2015. There is a great demand from the rest of the world. The demand is currently determined by Petrogas’ production capacity, which is why the company from Gouda foresees a large expansion. The factories in which plastic is converted into diesel operate almost energy neutrally after start-up, as the products that cannot be converted into diesel are incin-
Edwin Hoogwerf is proud of the Diesoil plants’ production. The production of ample factories is planned for the next five years, creating many new jobs in The Netherlands and it contributes to processing an enormous amount of plastic waste. Moreover, the fact that these factories are built in The Netherlands is a sign for Hoogwerf that the craftsmanship and quality of Dutch products are recognised in the energy sector. FME ENERGY GUIDE 2014-2015
009_H_petrogas.indd 9
9
03-12-13 13:24
YOUR REPUTATION IS MINE.
CAN YOUR REPUTATION BECOME OUR RESPONSIBILITY?
As an independent inspection and examination body, Vinçotte Netherlands provides safety, quality and environmental services, offering the benefits of its expert knowledge in various areas, such as checking the integrity of structures, installations, machinery, appliances and buildings and vetting health and safety conditions. Vinçotte Netherlands’ workforce includes over 100 technical experts. In addition to the principal place of business in Breda we also have offices in Rotterdam, Terneuzen and Akersloot and logistical support centres throughout the country. Vinçotte Netherlands forms part of the international Vinçotte group, which operates as a centre of excellence based on the efforts of over 2,500 employees and branches in 16 countries. Can we, with all of our expertise, make your reputation our responsibility? Take a look on our website :
Safety, quality and environment
010_AIB.indd 1
WWW.VINCOTTE.NL
28-11-13 11:54
Dutch suppliers in the oil, gas and power industry acting in a cluster Members Duch Energy Solutions A. Hak International bv Assai Software Services bv bv Twentsche Kabelfabriek Bronswerk Heat Transfer bv Brooks Instrument bv BSM Valves bv Busch bv Dhatec bv Doedijns Hydraulics bv Dovianus bv Dynaflow Research Group bv EIN Enterprise bv
In the year 1959 a huge gas field was discovered in The Netherlands. Combined with offshore oil production, this was the start of the development of a wide range of innovative, technical products and services. These developments were rapidly taken over by the international offshore industry, and the Dutch industries have built up an excellent reputation for innovation, reliability and quality ever since. More than 600 companies are active in the oil, gas and power industry. The Netherlands has Europe’s most extensive gas distribution network and ever increasing; new LNG terminals are constructed at the port of Rotterdam. The Gulf State Region is the world’s largest energy producer and offers the Dutch supply industry numerous opportunities. Dutch Energy Solutions: Global Excellence, Local Performance is an export programme of FME and IRO, working closely together with the Dutch Ministry of Economic Affairs and the local embassies. The objective of the cluster is to continue the relationships and to intensify further business network between the Dutch industry and oil, gas and power companies worldwide. Many Dutch suppliers are involved in the newest technologies for energy efficiency and offshore oil and gas solutions. Knowledge institutes work closely together with the
FIB Industries bv FMC Separation Systems bv Gemco Industries bv Gouda Holland bv Hint Engineering bv Interdam Merford bv KEMA Nederland bv Lankhorst Mouldings Lovink Enertech bv M&I - LABTECH bv NEW COSMOS - BIE Petrogas Gas Systems bv Power Piping International bv Insu-W-Rapid bv Quercus Technical
Inspection Services bv Rosscor bv Stork Thermeq bv Tebodin Netherlands bv TNO BU Oil & Gas Topec bv Tradinco InstrumentenApparaten bv Van Leeuwen Buizen Groep bv VBR Turbine Partners bv VSL bv
Dutch industry and international partners to develop the innovations that meet requirements of the future. Already for three years Dutch Energy Solutions has been organizing trade missions to Saudi Arabia, Abu Dhabi, Qatar, Kuwait and even to the relevant EPC contractors in London. Also, there is a large Holland Pavillion at the ADIPEC exhibition in Abu Dhabi every year. The oil, gas and power sector will be receiving a lot of Dutch visitors over the next few years for the Dutch suppliers have joined forces. The Netherlands has years of experience in oil and gas extraction and is gradually becoming the gas roundabout of Europe. All of this expertise is an ideal fit for what is needed in the Gulf, namely working with a reliable partner that offers cutting-edge technologies. The longstanding relation between The Netherlands and the Gulf region is apparent considering The Netherlands as one of Europe’s largest investors in countries in the region but also vice versa. The offices of Aramco Overseas, SABIC and Kuwait Petroleum are based in The Netherlands and Shell is a strategic partner in many of the Gulf countries. For more information: www.dutch-energysolutions.nl FME ENERGY GUIDE 2014-2015
011_J_DES.indd 11
11
03-12-13 13:25
NEW KID ON THE GRID THE DAMEN FCS 2008 “
Damen Offshore Wind Vessels aim to support both energy companies and offshore contractors at every stage of an offshore wind farm’s lifecycle: development, installation and maintenance. Other ship types are: survey vessels, workboats, feedering pontoons and installation vessels.
”
PETER ROBERT BUSINESS DEVELOPMENT MANAGER OFFSHORE WIND
www.damen.nl/en/markets/fast-crew-supplier | +31 (0)183 63 99 22 | pro@damen.nl
012_damen.indd 1
28-11-13 11:53
A
A. Hak Steenoven 2-6 4196 HG Tricht PO box 151 4190 CD Geldermalsen The Netherlands T +31 (0)345 57 92 11 F +31 (0)345 57 93 80 E info@a-hak.nl W www.a-hak.nl
A.Hak offers total solutions for the transport and distribution of oil, gas, water and electricity, for data exchange and telecommunication and for sustainable energy. Both in the Netherlands and abroad the independent companies within the group are active in the engineering, construction, commissioning, management, inspection, maintenance and abandonment of pipelines and cable
The A.Hak companies have a wide variety of costumers that includes oil, gas and
networks, above and below ground. The group companies are also capable of
water companies, regional and national network operators, energy companies,
drilling, dewatering, and coating pipes, as well as the complete construction and
data communication and telecommunication companies, rail operators, local,
installation of thermal energy storage systems and manufacturing of appliances,
regional and national authorities, the chemical and petrochemical industry and
masts and gantries. This broad range of services enables A.Hak to deliver turnkey
waste processors.
projects. A.Hak - A world of connections
A. de Jong Group ‘s-Gravelandseweg 390 3125 BK Schiedam PO box 5 3100 AA Schiedam The Netherlands T +31 (0)10 446 92 22 F +31 (0)10 415 45 81 E info@dejong.nl W www.dejong.eu
A. de Jong Inc. was established in 1877 and since then has served many clients on numerous engineering and installation projects. We have built a reputation for innovative engineering, sound economics and a thoroughly professional approach to our clients requirements. The soundness of our methods and the quality of our work are evidenced by our many successfully concluded through our website and find out a little more about us. If you have any quesprojects and repeat assignments from our clients in The Netherlands. We are
tions or would like to see if we might be able to help you on a current or upco-
a dedicated group of professional engineers and technicians that strive for
ming project, please feel free to send an email or to give us a call.
excellence in our work. We employ 250 highly skilled professionals. We keep an edge over many firms; primarily due to our dedication to provide our staff
A. de Jong Installatietechniek bv
with the latest technology and best education. Our design teams consist of
A. de Jong Installatiebeheer
highly qualified professional engineers and technicians for the specific job at
A. de Jong Airconditioning
hand.
HRI Installatietechniek bv De Jong Combustion bv
Our teams keep a very active line of communication open with our clients and R&V Engineering bv contractors so as to provide a very thorough and complete job. We have crea-
Joost Naaktgeboren bv
ted a website (www.dejong.eu) to provide our current and future clients with information about who we are, what projects we are currently working on and what we have done in the past. Please take a few moments and browse
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 13
13
03-12-13 13:56
A
Aarding Thermal Acoustics bv Industrieweg 59 8071 CS Nunspeet PO box 65 8070 AB Nunspeet The Netherlands T +31 (0)341 25 26 35 F +31 (0)341 26 21 12 E info@aarding.com W www.aarding.com
Aarding Thermal Acoustics B.V. established in 1960 is specialised in engineering, contracting and supplying products in the power and petro-chemical market for new and retrofit projects. ATA is an independent company which operates in the business globally. Our headquarters is located in Nunspeet, The Netherlands and we have sales offices in Singapore and uSA. The products of ATA are tailor-made and can be subdivided into the following
Acoustical Components
groups:
• Vent Silencers for Steam and Gas Applications • Flue Gas Silencers
Gas Turbine Exhaust Systems
• Commissioning Silencers
• Diffusers/Plenum and GT Exhaust Ducts • Single Cycle Exhaust Systems
ATA products meet the most stringent quality standards. We make certain of
• Bypass Exhaust Systems
this by making the quality concept our strategic target at all stages of every proj-
• Exhaust Stacks
ect. Our company is certified by Lloyd’s ISO-9001:2008 and quality is the hallmark
• Thermal Insulation
of all our employees. They are expert, flexible and versatile and qualified to high
• Boiler Internals
levels.
AEG Power Solutions Weerenweg 29 1161 AG Zwanenburg The Netherlands T +31 (0)20 407 78 00 F +31 (0)20 407 78 01 E sales.nl@aegps.com W www.aegps.com
AVAILABILITY SECURED AEG Power Solutions: your partner for reliable solutions AEG Power Solutions offers a full-range of reliable, cost-effective solutions, from power conversion modules and high reliability uPS systems to industrial chargers and DC systems, backed by more than a century of innovation and customer service.
tion and control products with more than a 20-year lifetime. Delivering the
With operations in 16 countries worldwide, AEG Power Solutions designs,
industry-leading availability that customers need to protect their production
manufactures, sells and services AC and DC power solutions for a wide variety processes, thus ensuring optimal uptime, maximum return on their investment of industrial and communications applications and for the renewable energy
and reduced lifetime costs.
sector.
AEG PS strives to be innovative by offering state-of-the-art customized solutions
With our unrivalled, global service back up and know how we ensure that
that exceed our customers requirements complete with a package of full project
our focus remains on delivering the best reliable solutions and service to our
life cycle services to ensure exceptional reliability, even in extremely harsh envi-
many and varied customers.
ronments.
Custom solutions for varying operational needs In the area of oil and gas, AEG PS has been providing robust and rugged power in a wide variety of oil & gas applications for over 60 years. In this sector the company offers a comprehensive range of world-class AC and DC power protec-
14 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 14
03-12-13 13:56
A
AIB Vinçotte Nederland bv Takkebijsters 8 4817 BL Breda PO box 6869 4802 HW Breda The Netherlands T +31 (0)76 571 22 88 F +31 (0)76 579 11 65 W www..vincotte.com
Vinçotte’s business is focused on quality, innovation and customer satisfaction. The experience, it has built up during its more than 135-year-old history, has enabled the company to develop into a Global Service Provider boasting over 130 specialist ‘Certification’, ‘Inspection’, ‘Testing’ and ‘Training’ activities seeking to enhance safety, quality and the environment in all industrial and service sectors. International presence
most qualified experts worldwide. Its internationally accepted team of experts
With over 2,500 employees and offices in 16 countries, we operate in Europe, Asia, are involved in countless top-priority projects in various areas, such as convenAfrica and the Middle East. Compelling evidence of our services are the interna-
tional and nuclear power plants, LNG terminals, pipelines, on off-shore-platforms
tional accreditations, approvals and authorisations bestowed upon Vinçotte. We
and construction sites.
are active in a wide range of sectors such as energy, the oil, gas & (petro)chemical industry, civil & industrial structures, health care and public utilities.
Vinçotte’s proficiency has led to the fact that it was chosen as a partner in the prestigious ITER nuclear fusion project. Vinçotte is responsible for checking the
Activities
design of the reactor vessel and the supervision of its construction.
Vincotte has a well-appreciated and internationally recognised reputation for its non-destructive testing (NDT), for its PED inspections as Notified Body and AKI
More information
services (pre-use inspections). The company has the experience and knowledge
Call upon the services of Vinçotte to be sure you are working with an organisation
that only comes from years of innovation and development efforts. In a number
that provides flexible and impartial services and multinational knowledge. For
of fields, such as automated ultrasonic testing, Vinçotte is renowned as one of the more information www.vincotte.com.
Altrex bv Mindenstraat 7 8028 PK Zwolle PO box 30160 8003 CD Zwolle The Netherlands T +31 (0)38 455 77 00 F +31 (0)38 455 77 11 E info@altrec.com W www.altrex.com
Altrex: Specialist in Access Equipment Altrex is an international brand which guarantees safety, responsibility and innovation: a global actor with a leading position in many markets for over 60 years. The company’s headquarters, including factory and logistic centre is established in Zwolle, The Netherlands. Additionally Altrex has subsidiaries in Belgium, Sweden and Spain. The wide assortment of access solutions varies from rolling towers, folding towers, façade scaffolding systems and suspended platform systems to ladders, folding ladders and stepladders, for professional usage as well as the DIy segment. Altrex also provides custom-made solutions for special situations. Some situations require customized work or a project based approach. Customized solution specialists personally advice customers for the best and safest solution in ladders, scaffolds, suspended platforms and other constructions. The engineering and production is carried out by a special team that has the necessary expertise and experience. It is possible to enable Altrex mechanics for a safe installation. Those who choose to work safely at great heights, choose Altrex. Therefore: Relax. It’s an Altrex.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 15
15
03-12-13 13:56
A
Anamet Europe Transformatorweg 30 1014 AK Amsterdam The Netherlands T +31 (0)20 586 35 86 F +31 (0)20 688 11 26 E info@anamet.nl W www.anamet.nl
Anamet Europe BV: Quality, Service & Partnership - The Pillars of Our Philosophy 65 years on, Anamet Europe’s philosophy continues to revolve around providing our customers with innovative products and excellent service. Today, our product range includes conduits, metal hoses, fittings and ancillary products available in a wide range of materials and specifications to meet practically every feasible application, whether electrical or industrial. By developing mutually beneficial
1. Anaconda flexible conduits and fittings: a solution close at hand
relationships with our customers, Anamet Europe is in a unique position to not
Sealtite, Multiflex, Multitite: Wide selection of mechanically strong metal flexible
only understand the nature of our customers business, but also to work with
conduits.
them to develop tailor-made solutions for their particular application require-
Available in a wide range of executions, Sealtite and Multitite are flexible
ment. Partnership, quality and service are the pillars on which our philosophy and metal conduits with cover, Multiflex are conduits without cover. Whether you success are built.
require square locked or fully interlocked, galvanized steel, stainless steel, bronze or aluminum, braided or unbraided, Anamet has a product to meet your requirements. With each type of conduit, there is a matching range of fittings including straight or elbow design, nickel-plated brass or stainless steel in ISO, PG or NPT.
Atlas Copco Compressors Nederland Merwedeweg 7 3336 LG Zwijndrecht PO box 200 3330 AE Zwijndrecht The Netherlands T +31 (0)78 623 02 30 F +31 (0)78 610 06 70 E info@nl.atlascopco.com W www.atlascopco.nl
Atlas Copco is the world’s largest manufacturer of air compressors. In addition to our broad range of rotary screw compressors and centrifugal compressors we also supply air dryers, air filtration equipment, aftercoolers, automatic control systems, industrial heat recovery systems and generators. Atlas Copco expertises in custom-engineered gas and air compressors as well as expansion turbines,
Products: lubricated and oilfree stationary and portable compressors, oilfree
primarily for process industries. Reliable compressor operation is vital for a
blowers, piston, screw and turbo. Modulair compressed air systems containerized,
smoothly running production. Food, pharmaceuticals and the electronic industry electric or diesel driven. Airdryers, gasdryers, aircoolers, generators, engineered benefit from Atlas Copco’s clean, oilfree air which ensures high quality in sensi-
turnkey projects.
tive and valuable products. The energy efficient operation of Atlas Copco compressors supports productivity of process industries. With advanced optimizing and controlling features Atlas Copco offers longlasting efficiency and substantial energy saving solutions. Worldwide Atlas Copco is represented in more than 160 countries, ensuring availability of supply, sales, rental and service. Our service organization operates on a 24/7 bases. Atlas Copco has been able to anticipate and meet increasingly stringent customer requirements and captured the leading position on the world market.
16 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 16
03-12-13 13:56
Bayards Aluminium Constructies
B
Veerweg 2 2957 CP Nieuw-Lekkerland PO box 9 2957 ZG Nieuw-Lekkerland The Netherlands T +31 (0)184 68 30 00 F +31 (0)184 68 43 45 E sales@bayards.nl W www.bayards.nl
Bayards Aluminium Construction BV is one of the world’s leading companies in engineering, design, fabrication and installation of complex aluminium struc-
• Link Bridges
tures for the offshore and shipbuilding industry. Bayards is an industry leader
• Service Platforms/Walkways
when it comes to developing structures and products with substantial weight
• Offshore Rig Ramps and Walkways, including
reduction and which require very little maintenance. As aptly noted in the com-
All construction includes design and engineering, procurement, prefabrication,
pany logo, Bayards offers Solutions in Aluminium.
transport, installation and commissioning on site.
Bayards ‘ focus on the Offshore Industry characterizes her as a full service contrac- Solutions in aluminium from Bayards are always custom-made, engineered with tor on a turnkey EPC contract basis. Bayards can offer you an ‘all inclusive’ pack-
profiles of their own development, and built in accordance with the latest inter-
age for every location including:
national safety regulations and highest quality standards.
• Complete Turn Key Helidecks
In addition to offshore and shipping, Bayards offers aluminium solutions to other
• Helideck Assembly Kits
market segments such as yacht-building, defence, high tech, tanks and vessels,
• Helidecks complete with: Aluminium Support Structures, Heat Tracing for Helideck
transport equipment, and civil engineering.
Winterisation, Aluminium Access System, Firefighting Equipment (including DIFFS),
Bayards is certified according to ISO 9001:2008 and AQAP2120-2 and is fully able
and Helideck Lighting
to meet all international offshore standards.
Bayards Safedeck - a helideck with enhanced, passive fire-suppressing performance
Thanks to 50 years of experience providing high-quality aluminium construction,
• Helicopter Hangars
Bayards has an extensive list of references from all over the world, available upon
• Stair Towers
request.
• Living Quarter Units
Please visit our website www.BAyARDS.nl and please contact us with any questions.
Machinefabriek Boessenkool bv Turfkade 13 7602 PA Almelo The Netherlands T +31 (0)546 48 88 00 F +31 (0)546 48 88 01 E info@boessenkool.com W www.boessenkool.com .
.
.
.
It can be a special machine with special demands and wishes. But it can also be
.
.
work of abnormal proportion, in categories such as new building, upgrading or
.
.
Proactive for prodigious engineering in off-shore and energy
revision. Our power is to supply special tasks of top technique. Company culture For the work we do, we have to be constantly in top shape. That’s why we created
. Special machines building, up to 40 meters; a 7000 m2 production facility with
a practical approach, in which three elementary parts play the lead, craftsman-
20 meter height and 120 ton hoisting capacity
ship, supply good solutions and a cooperative mentality of a pure co-maker. Together these elements give a superior quality signature to our work.
Certifications Qualified by several Notified Bodies to re-stamp official stamped quality steel (3.2
Capacities
cert.). Quality assurance ISO 9001:2008 (gold award).
. CNC Boring spindle 160 mm, work-area : 3.000 x 3.500 mm.
Workshop Approval by RINA, DNV, ABS, Bureau Veritas and Lloyds.
. CNC milling (4-axis) rotary table 3.000 x 3.500 mm, till 60 ton (weight),
Welding certification according to AWS D1.1, ASME IX, API6A, NEN EN 287-1 for
work-area : 20.000 x 6.000 x 3.000 mm, till 120 ton.
various welding process and various material combinations
. CNC vertical turning : Ø 5.500 x 4.000 mm, till 60 ton. . CNC turning : Ø 980 x 5.000 mm.
Machinefabriek Boessenkool is part of the Osse Equipment Manufacturing
. Grinding.
Group (www.oem-group.com )
. Assembly.
The group has capacity of: 150.000 man/machine hours a year; 10 large CNC
. Powder-coating
vertical lathes; 13 large CNC boring/milling machines; 5 large horizontal lathes;
. Precision welding, also in Aluminium and Stainless.
5 large drilling machines.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 17
17
03-12-13 13:56
Breman Machinery
B
Sasdijk 20 8281 BM Genemuiden PO box 135 8280 AC Genemuiden The Netherlands T +31 (0)38 385 53 73 E info@breman-machinery.nl W www.breman-machinery.nl
Breman Machinery makes components for builders of machinery, engineering bureaus and industrial end users, such as; offshore companies, the military, aerospace companies and other industrial firms. From simple structures to complex mechanical components. Work-pieces of high precision, often with extreme dimensions and weights.
• all machining and non-machining processing of (heavy) materials • welding and structures
Work-pieces that weigh tens or even hundreds of tonnes and are made to a
• assembly and fitting
precision of a hundredth of a millimeter. Samples of workmanship.
• corrosion protection
What’s unique about Breman Machinery is that they are able to produce these
Breman Machinery uses their unique machine capacity for their own projects
components and structures entirely in house.
and to supply specific components to third parties. What they aim for is customdesigned solutions.
They have the people, machines and facilities under their own roof. ISO9001, ISO3834 and VCA-certified. Extreme precision!
Bronswerk Heat Transfer Stationsweg 22 3862 CG Nijkerk PO box 92 3860 AB Nijkerk The Netherlands T +31 (0)33 247 25 00 F +31 (0)33 245 23 38 E info@bronswerk.nl W www.bronswerk.nl
Bronswerk was established seventy years ago. In this period, we generated a large amount of experience and knowledge in heat exchange solutions in the following markets: Power, Gas, Oil, Chemical, Air Handling and Food Processing, with a focus on Sustainability. Bronswerk specializes in sales, design, engineering and final assembly. All nonWe highly value delivering a good product and excellent service. We consider it
specialized side-steps are subcontracted. Since these subcontracting activities
a challenge to offer the best possible solution for every question in the area of
are always taking place through qualified partnerships, the quality is
heat transfer, fluid-flow systems and process design.
guaranteed. We aim to expand these partnerships in the future to further expand our possibilities as a whole.
Our engineering department consists of an enthusiastic team with well-trained and highly qualified professionals. The engineers from Bronswerk actively work together with the client to come up with the best solutions. They are capable of thinking out of the box and finding creative solutions. The organization values its transparency. We work in project teams allowing the client to deal with just one main contact, the projectmanager.
18 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 18
03-12-13 13:56
Brooks Instrument bv
B
Neonstraat 3 6718 WX Ede PO box 428 6710 BK Ede The Netherlands T +31 (0)318 54 93 00 F +31 (0)318 54 93 09 E brookseu@BrooksInstrument.com W www.brooksinstrument.com
C
About Brooks Instrument Brooks Instrument is a company of highly trained specialists with production locations in all world areas whose goal is to provide flow solutions that exceed customer expectations. The European headquarter is based in The Netherlands. Brooks provides the broadest array of flow products and systems in industries as Product Portfolio
bio pharmaceuticals, oil & gas, fuel cell, solar, chemicals, medical devices, analy-
Brooks Instrument’s portfolio for Oil & Gas industries includes metal and
tical instrumentation and semiconductors.
glass tube variable area flow meters (rota), magnetic level gauges, level and flow switches, thermal mass flow meters and a variety of flow accessories.
Service and Support
The strength of Brooks Instrument is the ability to produce flow meters for
Brooks Instrument provides a service network via representatives and distributors
extreme conditions such as low- and high temp, aggressive fluids and high
in almost every country. The nearest service point is easily traceable on our web-
pressures up to 20.000 PSI on wellhead applications and fluid injection. Serving
site. Brooks Instrument is certified to ISO 9001:2000.
EPC companies all over the world for more than 60 years we have built a lot of experience with projects, project documentation and test requirements. Our
www.BrooksInstrument.com
products are provided with international approvals for safe use and are exported to many different countries even where industrial laws require local approvals.
Cofely Nederland nv Kosterijland 20 3981 AJ Bunnik PO box 210 3980 CE Bunnik The Netherlands T +31 (0)30 656 94 00 F +31 (0)30 657 20 18 E info@cofely-gdfsuez.nl W www.cofely-gdfsuez.nl
To contribute to a better world through sustainable technology Cofely has extensive knowledge, experience and passion for technology. This enables us to deliver sustainable customer solutions in the areas of Energy Efficiency, Asset Efficiency and Human Comfort. By getting the most of resources, Cofely ensures comfortable and energy efficient working and living conditions, and the optimisation of technical installations and production processes. Cofely is part of GDF SuEZ Energy Services, the European leader in multi-technical services, with revenues of 14 billion euros in 2008 and 77,000 employees. GDF SuEZ Energy Services is a business branche of GDF SuEZ, one of the foremost energy companies in the world
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 19
19
03-12-13 13:56
D&C Engineering
D
Nieuwland Parc 301-302 2952 DD Alblasserdam PO box 1 2950 AA Alblasserdam The Netherlands T +31 (0)78 691 92 22 E info@dcengineering.nl W www.dcengineering.nl
D&C Engineering: a knowledge/know-how centre in the Overhead High Voltage Line and Storage Tank markets. For outsiders, these two disciplines seem to have almost no synergy. However, knowledge and know-how are the binding elements. In-depth knowledge of design, operation, inspection and maintenance of capital structures is a must for
accidents, which might occur during transfer and storage of dangerous cargo like
all D&C Engineering personnel.
petro-chemical products.
D&C Engineering’s ‘General Steel’ department is the market leader in The
Standards, codes and guidelines are indispensable in both fields, but directives
Netherlands in the field of design and construction of Overhead Voltage Lines and and regulations can only be written if knowledge of all processes involved is availSwitch Stations. Its involvement is either directly in projects for the energy provid- able. D&C Engineering is heavily involved in the implementation of this guideline ers and distributors or as engineer/advisor to the contractors who are involved in process for governmental authorities, the oil industry, depot/terminal owners manufacturing and installation of overhead lines and switch stations.
and energy providers. By being a member of committees (CEN/BSI and Cigré), as chairman of EEMuA, and by organising seminars D&C Engineering’s knowledge is
Its ‘Storage Tank’ department operates internationally for global petro-chemical
always at the forefront of the industry.
corporations as well as independent depot/terminal owners. D&C Engineering advises its clients with design, inspection and maintenance protocols as well as assisting the storage tank owners to prevent any human or environmental
Dhatec Line pipe Logistic Solutions Elskensakker 8 5571 SK Bergeijk The Netherlands T +31 (0)497 54 25 27 Skype bernadet_gijsbers E info@dhatec.nl W www.dhatec.nl
Dhatec Line pipe Logistic Solutions
With innovative products we provide safe, adjustable and flexible pipe transport
Dhatec specializes in developing and manufacturing products that prevent pipes
systems for trains and trucks.
from damaging during all logistics. We show pipe companies how they can guarantee a safe, efficient and damage free delivery of their pipes through the
Pipe Closure
entire supply chain. Dhatec’s customers have to deal with damages and accidents Closure of pipes against damage and contamination. during the logistics of pipes in the project’s supply chain. Dhatec can make a significant contribution in organizing for safe and damage free pipe logistics. Their
Pipe-end Protection
products and technical support improve the quality, efficiency and safety of
Protection of beveled ends of pipes and well heads.
the processes. With this expertise, Dhatec assists project managers in organizing the logistics of pipeline projects. The strengths of Dhatec are based on innovative- Pipe Coating ness, quality, flexibility and customer’s satisfaction. Based on these strengths the
We offer products for closure of pipes during blasting and temporary couplings
development department is in constant evolution. Existing products are continu-
during coating.
ously being customized to comply with the latest demands and specifications. Special sizes and extreme conditions are daily work. In addition, Dhatec offers
Pipe Handling
rental and recycling possibilities of its products to stimulate sustainability.
Easy and efficient pipe handling can be achieved with the solutions we offer for moving and lifting of the pipes.
Dhatec offers over 3.000 solutions in the following categories: Construction Pipe Storage
For construction at onshore, offshore and spool bases we have products available
Safe storage of line pipes can be facilitated by the use of our products.
such as stalk joining clamps, masking rings and water collectors.
Pipe Transport
20 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 20
03-12-13 13:56
Damen Shipyards Group Industrieterrein Avelingen West 20 4202 MS Gorinchem PO box 1 4200 AA Gorinchem The Netherlands T +31 (0)183 63 99 11 F +31 (0)183 63 21 89 E info@damen.com W www.damen.com
D
Damen Shipyards Group Damen Shipyards Group operates 40 ship- and repair yards, employing 8.000 people worldwide. Damen has delivered more than 5.000 vessels in more than 100 countries and delivers approx. 180 vessels annually to customers worldwide. Based on its unique, standardised ship-design concept Damen is able to guarantee consistent quality.
Damen Offshore Energy Offshore energy ranges from upstream oil & gas to offshore renewables. Damen
Damen’s focus on standardisation, modular construction and keeping vessels in
vessels and services are designed to support this industry. In order to design and
stock leads to short delivery times, low ‘total cost of ownership’, high resale value
built vessels that help our clients to be successful, Damen incorporates the key
and reliable performance. Furthermore, Damen vessels are based on thorough
stakeholders in the entire value chain, from oil producing companies to ship
R&D and proven technology.
operators and from wind turbine manufacturers to wind farm owners. I
Damen offers a wide range of products, including: tugs, workboats, naval and
In the oil & gas market more and more operations are being performed in
patrol vessels, high speed craft, cargo vessels, dredgers, vessels for the offshore
increasingly deeper waters and remote locations. This requires a range of vessels
industry, ferries, pontoons and super yachts.
supporting the complex offshore activities. The Damen focus is to design and build offshore vessels which can be utilized for these activities either by means of
For nearly all vessel types Damen offers a broad range of Services, such as mainte- PSV’s and Anchor Handling Tug’s or by Construction vessels, IRM vessels and ROV nance, spare parts delivery, training and transfer of (shipbuilding) know-how. To
support vessels. New and innovative vessels are being setup by Damen to meet
complete, Damen offers a variety of marine components, especially nozzles, rud-
the progressing market requirements, .
ders, anchors, anchor chains and steel works. In the offshore renewables industry Damen vessels can be deployed in all stages In addition to ship design and shipbuilding, Damen Shiprepair & Conversion
of an offshore wind farm, assisting research, information gathering, crew supply,
offers a network of 16 repair & conversion yards worldwide, with dry docks
cable laying, transport and feedering, turbine installation and more. But also in
ranging up to 420x80 metres. Conversion projects range from adapting vessels
the upcoming waves and tidal energy industy.
to today’s requirements and regulations to the complete conversion of large offshore structures. DS&C handles 1,500 repair and maintenance jobs annually.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 21
21
03-12-13 13:57
Discom bv
D
Staalindustrieweg 5 2952 AT Alblasserdam The Netherlands T +31 (0)78 681 09 60 F +31 (0)78 681 09 70 E info@discom.eu W www.discom.eu
The Discom Effect Exhaust systems are having to meet increasingly strict demands. Noise-limiting measures are being tightened. What is more, governments are setting new standards for the emission of contaminating gases. Discom’s specialist knowledge as regards the integration of different techniques and technologies is invaluable to anyone who wants to reuse heat from exhaust gases. Our focus on innovation enables us to meet the demands of today and tomorrow and to add value to any
Specialists in the energy market
assignment, no matter what the size. The added value of the Discom Effect.
Discom is a specialist in all aspects of exhaust systems and the energy market is one of our key fields of work. We develop custom-made systems for power plants, temporary and emergency power systems and combined heat and power installations. It may be that a power plant with a capacity of many megawatts has to fulfil a complex package of requirements and standards, or that you are looking for an efficient solution for a mobile generator set. In both cases, Discom can advise and produce in a custom-made fashion, taking account of specific circumstances and special standards. The solution can range from a simple maximum efficiency silencer to a complete exhaust system, from motor to flue.
Doedijns Group International (DGI) Coenecoop 103-105 2741 PH Waddinxveen PO box 179 2740 AD Waddinxveen The Netherlands T + 31 (0)182 30 28 88 F + 31 (0)182 30 27 77 E info@doedijns.com W www.dgi-corp.com
Doedijns Group International (DGI) designs, produces and distributes engineered power, motion and control solutions to its clients in the oil & gas and maritime industries. DGI is trusted by its clients as a solutions provider for complete project management and as an official distributor of a wide range of components from
Each of the DGI members is ISO certified and works according to stringent, inter-
well-known brands.
nationally recognised quality standards.
DGI members include Doedijns, Koppen & Lethem, Wilmax Control Systems and Logan Industries. Whether a standard or custom-build solution is needed, we are there to provide support and develop a system that fully meets the requirements. Our solutions include: • Heave compensation Systems • Helicopter Refueling Systems (heliRFS) • Hydraulic Oil Filtration Systems (RMF Systems) • Hydraulic Power Units / Systems • Sampling Systems • Valve Automation Systems • Wellhead Control Panels • Winch Systems & Spoolers
22 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 22
03-12-13 13:57
Dorset Green Machines bv
sustainable supplier
Weverij 26 7122 MS Aalten The Netherlands T +31 (0)543 47 21 03 F +31 (0)543 47 53 55 E gm@dorset.nu W www.dorset.nu
D
Dorset Green Machines BV: Manufacturing and Engineering. We focus on commercially attractive solutions for treatment of biomass waste products, using available residual heat for drying biomass, such as manure and sewage sludge. Pyrolysis systems for energy from old tyres, plastics, sewage sludge, biomass. The dried product can be sold as valuable organic fertilizer or as fuel for green energy or can be processed further. Dorset manufactures complete pelletizing plants in plug-and-play solutions. Pelletizing makes the dried product more marketable and significantly decreases the volume, which results in new export possibilities and further lower transport and storage costs. Our newest development is the pyrolysis plant, turning biomass etc. into 50% oil/gas and 50% biochar. The oil and gas provide fuel for creating green energy through combustion. The ashes can be used/sold as a concentrated fertiliser.
Duiker Mechanical bv Chroomstraat 144 2718 RH Zoetermeer PO box 27 2700 AA Zoetermeer The Netherlands T +31 (0)79 360 11 30 F +31 (0)79 361 11 81 E info@duikerme.nl W www.duikerme.nl
Duiker Mechanical is supplier to machine builders, oil and gas industry, offshore industry, chemical industry, aviation, engineering companys and the maritime industry. Duiker Mechanical specialises in customised small to medium sized series of products where hig standards for quality, measurements and deliverability are key- factors Duiker Mechanical is ISO-9001: 2008 certified and delivers according to several standards as set by Lloyds , DNV, BV, ABS en GL.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 23
23
03-12-13 13:57
Eaton Industries (Netherlands) bv PO box 23 7550 AA Hengelo The Netherlands T +31 (0)74 246 68 88 E info.electrical@eaton.com W www.eaton.eu/electrical
E
Eaton Industries (Netherlands) bv (Hydraulics) PO box 9707 5602 LS Eindhoven The Netherlands T +31 (0)6 39 01 41 32 E info.hydrowa@eaton.com W www.eaton.com/hydraulics
Eaton Corporation is active in both the electrical sector and the industrial sector. Hydraulics business Electrical business
Eaton Hydraulics offers a full portfolio of fluid conveyance and power & motion
Eaton’s Electrical Solutions & Services (ESS) Business unit is responsible for the
control products for hydraulic applications. It has a number of family brands with
execution of complex projects for the Electrical Group of Eaton within EMEA.
world class reputation like Eaton, Vickers, Char-Lynn, Aeroquip, Walterscheid,
Market segments covered by ESS are: Oil & Gas, Mining, Critical Power, utility and Gromelle / Hansen Hydrowa, Hydro-Line, Indunorm, Integrated Hydraulics, Industry.
Synflex, ultronics and more.
The ESS team offers a comprehensive portfolio of support, tailored for every stage
Contact:
of a power system’s life cycle. Through our design, build and support services, we
Eaton Electrical: Bert Droppers, Director Marketing & Services
are dedicated to understanding your challenges and ensuring that your entire
Eaton Hydraulics: Roelof de Bruyn Prince, Key Account Manager Benelux
electrical infrastructure functions at its highest level.
ELEQ Tukseweg 130 8331 LH Steenwijk PO box 12 The Netherlands T +31 (0)521 53 33 33 F +31 (0)521 53 33 91 E info@eleq.com W www.eleq.com
ELEQ Mastering Electricity ELEQ is an international company which plays a leading role in electrical energy management technology for more than 60 years. Optimum control through metering and connecting – from source to outlet – making ELEQ a trusted and versatile partner for the electrical energy sector. With some 250 employees divided over the locations in Steenwijk (NL), Kerpen (D) ELEQ supplies a wide and varied range of international clients. ELEQ produces a
and Kenitra (MA), ELEQ occupies a leading market position. ELEQ provides a chal-
broad assortment of current transformers, transducers, measuring instruments
lenging working environment where German “Gründlichkeit” goes hand-in-hand
and light-mast junction boxes for industry, the transport and distribution of ener- with Dutch entrepreneurial spirit. gy, the shipping sector, and public lighting. Standard and customised products alike. Solidly and durably built in keeping with our customers’ requirements. These properties have given the brand name ELEQ international renown.
24 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 24
03-12-13 13:57
Escher Process Modules bv Noordhoek 37 3351 LD Papendrecht The Netherlands T +31 (0)78 644 82 50 F +31 (0)78 644 82 51 E info@escher.nl W www.escher.nl
E
Escher Process Modules (‘Escher’) is a leading global Process Technology House and provider of process solutions since 1925.
F
We engineer, fabricate, package and supply: A) Oil & Gas Treatment Systems • Dehydration: TEG, Mole Sieve, Glycol Regeneration and CO2 dehydration • Hydro Carbon Dew Pointing: LTS, Silica Gel, Joule Thompson and Chilling • Fuel Gas Conditioning • Pump, Metering and Chemical Injection Skids B) Combustion Systems
C) Process Vessels • Gravity Separators G/L separators and L/L Separators • L/L Extractors Rotating Disc Contactor • Crystallizers
• Elevated Flare Systems Derrick Supported (retractable or fixed), Guy Wired and Free Standing
Our After Sales Service Department is 24/7 available to serve your inquiries to
• Non-Elevated Combustion Systems
ensure optimal operation during and even after the system life cycle. The after sales
Ground Flares, Burn Pits and G/L incinerators
services include the supply of spare parts, services and replacements.
• Flare Tips
Escher continuously focusses on safety first, delivery of quality and on-time perfor-
Open Pipe (c/w steam or air assist), Sonic Multi arm and special combined
mance. Innovation, value added technology and lessons learnt since 1925 are inte-
systems • Flare Stacks
grated in our process solutions. Sustainable system design and project execution is a high priority within Escher.
FIB Industries bv Einsteinweg 18 8912 AP Leeuwarden PO box 314 8901 BC Leeuwarden The Netherlands T +31 (0)58 294 59 45 F +31 (0)58 212 57 42 E info@fib.nl W www.fib.nl
We are a fabricator of pressure- and process containing equipment constructed from stainless and nickel alloy materials and which usually form a critical part of a process installation. Typical equipment include: Our design and construction is carried out in accordance with the most com• Reactor Internals (for hydro-processing technology)
mon international codes, such as PED, ASME VIII, AD-2000, PD 5500, RToD
• Column Internals
(Stoomwezen), CODAP, API 620, API 650 and BS 2654, KIWA and GB-160 (China).
• Industrial Burners (Gasification and LowNox)
We are certified to ISO 9001:2000 (general), ASME U/R-Stamp, HP-0 (TUV), SQL
• Oxygen Mixing Nozzles
(China Manufacturers License) and we are authorized to issue CE certification.
• Plate packs • Flare tips • Columns (fully dressed, including internals) • Scrubbers • Heat Exchangers Our customers are OEM’s, EPC Contractors and Plant Owners and we deliver our products on a global basis. Major market segment is in downstream processing (chemical and oil and gas).
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 25
25
03-12-13 13:57
Geha bv Veilingstraat 52 7833 HN Nieuw-Amsterdam PO box 29 7833 HN Nieuw-Amsterdam The Netherlands T +31 (0)591 30 70 50 F +31 (0)591 55 37 81 E info@geha-holland.nl W www.geha-holland.nl
Geha b.v. is an independent manufacturer of machinery and equipment,
G
focused on components for air-cooled heat exchangers and condensers. Our 50 employees’ activities include design, development, engineering, production and assembly of equipment to suit your special needs. Our philosophy: Our business is built on supplying what our customers rightly The company
expect: solid engineering advice, quality production / products and on-time
We are a family-owned company, founded in 1957, located in the Northeast
execution of projects. To this end we encourage our employees to remain updated
of the Netherlands. Our production facilities include 3,500 m2 under roof
in their individual field of expertise. ISO-, SCC-, and SLV-certification assure that
plus 6.300 m2 for assembly and testing of coolers. We engineer-to-order in 3-D
our processes and our tooling are fit-for-purpose. Please refer to our ad in this
modelling for a wide variety of climates, from dry desert to offshore and sub-
publication for more information about our product range.
arctic. Our markets Typically, our customers are manufacturers of fin pipe bundles, mainly located in Western Europe. Through them our products find application on gas- and oilrigs, and in petro-chemical installations throughout the world.
Global Gas Network Initiative
Concourslaan 17 9727 KC Groningen PO box 19 9700 MA Groningen The Netherlands T +31 (0)50 521 30 00 E info@ggni.nl W www.ggni.nl
Global Gas Network Initiative is a network of independent Senior Gas Experts with the ambition to help governments, authorities and companies to use natural gas as the fuel of choice. We can help you with questions about gas exploration & production, gas transportation, storage and distribution. The GGNI Senior Experts will gladly support you in using natural gas in an economical and sustainable way. Our services: Coaching
Our Senior Experts with many years of experience in the sector are excellent coaches for you and your staff.
Workshops
Interactive workshops in which we will discuss your gas business, using the Dutch gas infrastructure as a reference model.
Audit & Advice Our experts can audit your solutions and help you optimize your gas infrastructure, both on a strategic and operational level. They offer advice, practical assistance from well to burner. Proven expertise: independent and committed.
26 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 26
03-12-13 13:57
Glynwed bv Steenpad 5 4797 SG Willemstad PO box 53 4797 ZH Willemstad The Netherlands T +31 (0)168 47 36 51 F +31 (0)168 47 32 00 E info@glynwed.nl W www.glynwed.nl
Glynwed bv is responsible for consulting, sales and service activities of Rheinh端tte pumps which are used in the chemical, petrochemical, environmental and steel
G
industries. As a specialist in corrosion and wear resistant materials, since 1857 Rheinh端tte
We dispose of a strong (brand independent) service department which offer
lead the field in know-how in many specific areas, and have a world-wide repu-
custom made solutions for the maintenance of pumps and valves, available
tation in the handling of sulphur and sulphuric acid applications.
24 hours a day, 7 days a week.
The basis for our comprehensive pump range are the three material groups:
Our strength is supplying custom-made solutions, based on the specific require-
Metal, Plastics and Ceramics. Thanks to this wide variety of materials and more
ments from our clients.
than 40 different pump ranges we are able to offer solutions specific to the process and the medium.
Gouda Holland bv PO box 8 2851 AW Haastrecht The Netherlands T +31 (0)182 50 62 00 F +31 (0)182 50 62 09 E info@goudaholland.com W www.goudaholland.com
Company profile Gouda Holland Gouda Holland is a manufacturer of cable management systems for both industrial as well as commercial use. years of experience and effective reactions to the ever changing demands of this industry have led to a wide range of readily available industrial cable duct systems each suitable for its own specific area of application. Gouda Holland cable ducts are applied in the widest variety of industries, such as the chemical and petrochemical industries, offshore activities, energy, telecommunications and dairy and food industry.
Wide span cable ladder Marine ladder
Gouda Holland is able to provide solutions for specific requirements, especially because the company produces its own standard range of cable ducts in stainless Material types: steel, hot dip galvanized steel and aluminum. The Crafty, Crafty MF and Lock sys-
Stainless steel AISI 304 BS 304 / WL Standard 1.4301
tems are particularly popular due to their high span capacity. Other systems also
Stainless steel AISI 316 BS 316 / WL Standard 1.4404
regularly used in (petro-) chemical industry are Resist, Tray and Marine Ladder.
Mill Galvanised steel EN 10142 Mill Galvanised steel EN 10142 and coated
Gouda Holland is VCA-P and ISO-9001-2008 certified.
Hot Dip Galvanised steel NEN-EN-ISO 1461 Aluminum EN-AW-1050A
Product range: Cable tray
Contact:
Trunking
Akram Achikhi, Manager Sales
Cable ladder
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 27
27
03-12-13 13:57
GustoMSC Karel Doormanweg 66 3115 JD Schiedam PO box 687 3100 AR Schiedam The Netherlands T +31 (0)10 232 08 00 F +31 (0)10 232 08 01 E marketing@GustoMSC.com W www.GustoMSC.com
GustoMSC is a renowned design and engineering company with a 150+ year
G H
history. The company speciality targets mobile offshore units for the oil, gas and wind energy industries: jack-ups, semi-submersibles, drillships and other monohulls. The business approach is to deliver class approved proprietary designs
Picture courtesy Seadrill
(built by independents) and associated equipment such as VSD rack and pinion jacking-, fixation and X-y skidding systems, and offshore cranes. Drilling jack-ups GustoMSC developed the highly successful CJ series of drilling jack-ups for exploration and development drilling and production. The CJ46-X100-D is the starting design aimed for 375 ft water depth, with to date 9 units operational and 17 under construction. Additionally the focus on the North Sea is through the CJ54-X135-A and the CJ70-X150-B. The CJ series has been recognized by the major operators and drilling contractors as the most efficient units for drilling in up to 150 m water depth. For jack-ups on the Norwegian Continental Shelf the West Elara (CJ70) holds the record at 135 m at Gullfaks. Of these huge units, 3 are operational and 7 under construction. Just some names to remember: Maersk Innovator, Maersk Inspirer, West Elara and West Linus.
Hatenboer-Water bv Mercuriusweg 8 3113 AR Schiedam PO box 6013 3002 AA Rotterdam The Netherlands T +31 (0)10 409 12 00 F +31 (0)10 409 12 10 E info@hatenboer-water.com W www.hatenboer-water.com
Hatenboer-Water supplies sustainable solutions for all your water-related challenges and basic needs: with specialist expertise, in house engineering, design and production in a modern operating environment. The entire process, from water intake to water distribution, can be taken care of for you by Hatenboer-
Productmatrix
Water. From the supply of a standard product such as a pump or filter, right up
• Boilers, Heaters & Heat exchanges
to fully integrated custom-made water treatment systems that consist of proven
• Construction & Modification
technologies to innovative developments. With all necessary worldwide after
• Engineering & Consultancy
sales service, consultancy and quality assurance. Hatenboer-Water; your partner
• Fluid control
in water treatment & services.
• Health, Safety, Environment equipment Hatenboer-Water: Fresh in water since 1906 • Maintenance
A few examples of our solutions:
• Mechanical automation
• production of industrial process water and ultra pure water
• Metal structures & supports
• production of boiler feedwater
• Process Control
• reclaim of valuable components from process streams
• Rotary equipment
• supply of drinking water for offshore, hotels, domestic and industrial
• Shipbuilding & Offshore Vessels
complexes
• Transport & Logistic systems
• upgrade of brackish groundwater to process water or potable water
• Utilities & Power supplies
• disinfection of different process water streams
• Miscellaneous
• prevention of legionella infection
28 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 28
03-12-13 13:57
Heerema Fabrication Group SE Noordweg 8 3336 LH Zwijndrecht PO box 58 3330 AB Zwijndrecht The Netherlands T +31 (0)78 625 04 25 F +31 (0)78 619 40 69 E info@hfg-heerema.com W www.heerema.com
Heerema Fabrication Group (HFG) is a leading contracting group which specializes in the engineering and fabrication of large and complex structures, mainly for the oil & gas and energy industry. HFG owns three large fabrication yards, situated around the North Sea, a workshop facility in Poland and a multidisciplined facility engineering company in the Netherlands. The fabrication locations are all equipped with large prefabrication and assembly halls and rank
HFG is widely recognized for its integrated project management capabilities to
amongst the largest indoor construction facilities in Europe. All locations are
ensure execution of EPC(I) projects on time and within budget.
H
large enough to handle several large projects simultaneously. units fabricated by HFG range from jackets, topsides and modules for leading oil & gas and energy companies. The engineering company HFG Engineering is specialized in fabrication-driven engineering and practical designs to offers clients an intgrated engineering and fabrication approach.
Hitec Power Protection Bedrijvenpark Twente 40 7602 KB Almelo PO box 65 7600 AB Almelo The Netherlands T +31 (0)546 58 95 89 F +31 (0)546 58 94 89 E info@hitec-ups.com W www.hitec-ups.com
Hitec Power Protection Hitec Power Protection develops, manufactures and delivers turnkey power solutions to ensure uninterruptible, continuous and conditioned power supply to mission critical processes. Core of the Hitec Power Protection solution are rotary uPS (uninterruptible Power Supply) systems using flywheel energy storage. This is proven technology, based on more than 55 years of experience
Markets
and supported by a global installed base of more than 2.000.000 kVA in high
• Internet Datacenter
demanding industries.
• Semiconductor • Telecom
A global partner to rely on
• Finance
Hitec Power Protection, with its headquarters in The Netherlands, has eight local
• Process
sales and service offices worldwide and highly qualified partners in more than
• Aviation
50 countries. Our offices are located in the united States, united Kingdom, Spain,
• Government
China, Singapore, Taiwan and Malaysia. Our global 24/7 helpdesk offers immedi-
• Healthcare
ate round the clock support where and when needed.
• Pharmaceutical • Textile • 24/7 manufacturing • Defence
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 29
29
03-12-13 13:57
Howden Netherlands bv Lansinkesweg 4 7553 AE Hengelo PO box 975 7550 AZ Hengelo The Netherlands T +31 (0)74 255 60 00 F +31 (0)74 255 60 60 E cooling.fans@howden.nl W www.howdencoolingfans.com
Howden Netherlands designs and supplies industrial cooling fans. We also provide a full aftermarket service for all Howden fans, and heat exchangers installed in the Benelux countries. Howden industrial cooling fans are designed for cooling towers, heat exchangers
H
and steam condensers. They range in size from fans for packaged cooling systems to fans up to 25 m diameter for cooling towers. Each of our cooling fan designs has its own unique characteristics in terms of efficiency, noise levels and application. We have developed our cooling fans over the last 50 years and offer the most reliable and quietest cooling fans available. Our cooling fans are widely used in the power and petrochemical industries and for large scale HVAC applications.
Howden Thomassen Compressors Havelandseweg 8-a PO box 99 6990 AB Rheden The Netherlands T +31 (0)26 497 52 00 F +31 (0)26 497 52 01 E tcs@thomassen.com W www.thomassen.com
Howden Thomassen Compressors (HTC) was founded over 100 years ago. Since then, it has established a first-class reputation for providing quality, tailor-made compression solutions to the oil, gas, refining and chemical industries. Our in-depth knowledge of field processes and compressor-related systems enables us to design, build, install, maintain and repair all reciprocating compres- The technical specifications of our compression systems - which meet or exceed sors and to service, revamp and overhaul also centrifugal compressors and steam
API and ISO - reflect the strict requirements of the major oil and chemical com-
turbines. HTC provides reciprocating compressors including all kinds of auxiliary
panies. We engage in fundamental research and have developed several innova-
equipment used in conjunction with this equipment.
tive techniques that save you time and money. We additionally offer tailor-made training courses to our customers, which are well known for their thoroughness,
HTC’s service is comprehensive and includes:
attention to detail and high standards.
• The installation, maintenance and monitoring of compression systems. • The supply of spare parts. • Field and factory repairs. • 24/7 Call-Out service. • Complete system overhauls. • Revamping of existing compression equipment.
30 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 30
03-12-13 13:57
Huisman Equipment bv Admiraal Trompstraat 2 3115 HH Schiedam PO box 150 3100 Ad, Schiedam The netherlands T +31 (0)10 245 22 22 F +31 (0)10 245 22 20 E info@huisman-nl.com W www.huismanequipment.com
Huisman is a globally operating company with extensive experience in the design and manufacturing of heavy construction equipment for leading offshore companies. Our equipment, varying from stand-alone components to highly engineered and integrated systems is designed and manufactured under own management. Our product range can be subdivided into six main categories:
H
Our new production facility in Brazil should be operational in 2014. Additional • Cranes
sales, engineering and service support offices are located in Australia, Brazil,
• Pipelay Equipment
norway, Slovakia, Singapore and the uSA.
I
• Drilling Equipment • Winches
We are constantly working on new solutions and systems which we believe add
• Vessel Designs
value to the market’s existing technologies, and which have been implemented
• Specials
into many of our products. As we have extensive operational experience with a wide variety of heavy construction equipment, we are able to use the best
We are internationally known for our technical and creative solutions, timely
solutions for new products and projects. Our internal disciplines include
delivery of high quality equipment with full capacity from day one and a high
Mechanical, Structural, naval, Hydraulical, Electrical and Software Engineering.
reliability guarantee during operations. Our production is divided between our
Our in-house design and engineering expertise, in combination with our pro-
production facilities in The Netherlands, China and the Czech Republic.
duction, testing, commissioning and installation facilities, enable us to deliver custom designed equipment on a turnkey basis.
Iemants bv industrieterrein Hoge Mauw 200 2370 ArEndOnK Belgium T +32 (0)14 672 281 F +32 (0)14 672 092 E info@iemco.be W www.iemants.com
iemants nv is, as part of the Smulders group, an international steel construction company with over 50 years of experience in the engineering, fabrication, supply and assembly of steel constructions. Together with the sister companies Willems in Balen (B) and Spomasz in Zary (Poland) we dispose of a workshop surface of approx. 100.000 m². The annual pro- The well-equipped factories are furnished in such a manner that internal logistics duction capacity of the three companies is approx. 55.000 tons.
run as smoothly as possible. Large and heavy pieces are the standard rather than the exception, as there is sufficient space and a hoisting capacity of up to 600
The Smulders group also disposes of a department Offshore Wind.
tons. All handlings are controlled and executed by employees with a decent and
With a track record of more than 950 foundations for the offshore wind industry
qualified training, both in their area of skilled expertise and in safety. Meeting
(delivery started in 2002), Smulders Projects Belgium can be seen as one of the
the required standards and having the necessary certificates are fundamental to
most important suppliers worldwide.
iemants. in 2008 iemants also created “Angus” in india, an Engineering Office with approx-
All locations are supplied with a modern machine park with its own shot-blasting imately 15 engineers (on top of the 55 engineers in Belgium). cabins and paint shops. The machine park of each division is completely computer controlled and linked to the different engineering departments. This causes Since September 2013 the entire Smulders group has been taken over by the the data to be streamlined and exchangeable.
French group Eiffage. This taking over will consolidate our position in the international market.
FME EnErgy guidE 2014-2015
013-57_profielen.indd 31
31
03-12-13 14:59
IHC Hydrohammer bv Smitweg 6 2961 AW Kinderdijk PO box 26 2960 AA Kinderdijk The Netherlands T +31 (0)78 691 03 02 F +31 (0)78 691 03 04 E info.hh@ihcmerwede.com W www.ihchydrohammer.com W www.ihcmerwede.com
IHC Hydrohammer B.V. designs, manufactures and supplies hydraulic piling hammers, for on- and offshore use and is known throughout the world for its innovative approach. This innovative approach is not simply confined to the hammers, but also extends to entirely new piling techniques, foundation equipment and hammer accessories, with a view to making pile driving more efficient, more controllable, less noisy and more widely usable.
I
IHC Merwede Offshore & Marine Rivierdijk 586 3371 ED Hardinxveld-Giessendam PO box 5 3370 AA Hardinxveld-Giessendam PO box 216 2920 AE Krimpen aan den IJssel The Netherlands T +31 (0)184 67 73 00 F +31 (0)184 67 73 01 E shipyard.mws@ihcmer-wede.com W www.ihcmerwede.com
Company profile IHC Merwede – Offshore division other locations around the world. The Offshore division of IHC Merwede is focussed on the continuous develop-
Through its pioneering role, IHC Merwede ensures compliance with the latest
ment, design and construction of reliable, custom-built assets for the specialist
technological developments, strictest safety regulations and most stringent
oil and gas, and renewable energy markets. It is a low-risk, one-stop shop for the
environmental standards for pipelay, well intervention, diving support and multi-
best design consultancy, product offering and finance package supplied to cus-
purpose offshore support vessels.
tomers in the offshore market. The company has several offshore equipment business units and therefore draws IHC Merwede has in-house expertise for engineering and manufacturing innova-
on a long history of designing, constructing, assembling, commissioning, deliv-
tive vessels and advanced equipment, as well as providing life-cycle support. Its
ering and maintaining a broad range of offshore equipment for the oil and gas
integrated systematic approach has helped to develop optimum product perfor-
sector. This varies from the fabrication of single parts to complete integrated
mance and long-term business partnerships.
systems, such as equipment for pipe- and cablelaying, and diving and offshore support.
Due to its expertise and strong relationships with suppliers, manufacturers and sub-contractors, IHC Merwede is able to take responsibility for complete turnkey
Technological innovation will remain the company’s underlying strength through
projects. The company’s production facilities in The Netherlands can accommo-
its continuous investment in research and development. Moreover, it helps to
date the construction of large new-build vessels and it can also build vessels in
safeguard a sustainable environment.
32 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 32
03-12-13 13:57
Jenbacher bv Kelvinring 58 2952 Bg Alblasserdam PO box 114 2950 AC Alblasserdam The netherlands T +31 (0)88 001 97 00 F +31 (0)88 001 97 01 E jenbacher.netherlands@ge.com W www.ge-distributedpower.com
gE Energyís gas Engines division is a manufacturer of gas engines, generator sets, combined heat and power (CHP) modules, Organic rankine Cycle (OrC) systems and auxiliaries. With a legacy of technological innovation across three product lines, including Jenbacher gas engines, Waukesha gas engines and Heat recovery Solutions technology, gEís gas engines set the industry standard for flexible fuel capability, low emissions and efficiency. Engines can operate not only on natural gas, but on a broad range of alternative gases such as biogas, landfill gas, coal mine gas, flare gas and sewage gas featuring impressive fuel flexibility. Solutions include combined heat and power, gas compression, and waste heat-to-electricity generation in industries ranging from oil & gas and agriculture and are deployed in over 80 countries. With this ability to provide diverse power output, ranging
J
from 0.12 ñ 9.5 MW, and eight products and solutions qualified through the gE ecomagination program, gEís gas Engines business offers specialized local power
K
solutions to deliver cleaner, more efficient, affordable energy around the world.
Keppel Verolme Prof. gerbrandyweg 25 3197 KK rotterdam - Botlek PO box 1001 3180 AA rozenburg The netherlands T +31 (0)181 23 43 00 F +31 (0)181 23 43 46 E mail@keppelverolme.nl W www.keppelverolme.nl
Keppel Verolme, a wholly-owned subsidiary of Keppel Offshore and Marine Ltd, spans over 54 hectares in rotterdam’s Botlek area. This location in the Port of rotterdam offers convenient access to both the north Sea and much of the vast industrial hinterland of Western and Central Europe. it is the first repair yard available when entering the Port of rotterdam from either the English Channel or the north Sea. The yard is situated at only 11 miles sailing distance from the open With these excellent facilities, the ideal location of the yard, the high skills of dedsea, without any restrictions like overhead obstacles.
icated employees, vast experience, the strength of the Keppel Offshore & Marine
The Keppel Verolme yard can accommodate any seagoing vessel and floating
group, and willingness to adapt to ever changing market situations, Keppel
offshore unit. The facilities of the yard comprise workshops and warehouses,
Verolme offers her clients creative solutions.
three graven dry-docks, with the largest drydock measuring 405 meters in length and 90 meters in width, 2000 meters of quay side with a water depth of up to 12.00 meters, all equipped with suitable craneage. Keppel Verolme works according quality management system which is based on the nEn-En-iSO 9001, iSO 14001 and OHSAS 18001 requirements. yard is SCC** and iSPS certified.
FME EnErgy guidE 2014-2015
013-57_profielen.indd 33
33
03-12-13 16:37
Klip bv van Markenstraat 2 2941 BX Lekkerkerk PO box 2517 2940 AA Lekkerkerk The Netherlands T +31 (0)180 45 21 88 F +31 (0)180 66 23 08 E sales@klip.nl W www.klip.nl
Established in 1947 Klip is a privately owned, multi-trade full Service Industrial Contractor. We offer a highly skilled workforce of Engineers, estimators, planners, quality control personnel and buyers in our management team. Together with our performance motivated field staff of pipe fitters, boilermakers, maintenance mechanics and operating engineers, we provide complete industrial mechanical service in
• Mechanical & Piping.
the Petrochemical, Energy and Industrial Sectors.
• Engineering.
Our fabrication facilities use state-of-the-art welding and fabrication
• Main- and sub contracting for process installations and shutdowns.
techniques, which allow us to prefabricate piping, vessels, steel and modular assem-
K
blies in alloys ranging from carbon steel to titanium. All fabrication is proudly per-
Construction codes
Certification
formed in accordance with PED, ISO-9001 and VCA** safety and quality standards.
• RtoD
• VCA**
• PD 5500
• NEN-EN-ISO 9001
Types of fabrication.
• ASME VII div. I
• NEN 4400-1
• Turnkey modular assemblies from simple mount pumps to complicated
• AD2000
• Marking allowance for Lloyds
packages of structural steel, piping, vessels, pumps, exchangers, electrical,
• NEN-EN 13445
• ASME U-stamp
instrumentation, insulation.
• NEN-EN 13480
• NEN-EN-1090-I
• Distillation columns, pressure-vessels and heat exchangers.
• NEN 3650 (offshore)
• ISO 3834
• Modifications of installations and process equipment.
• PED
• KIWA
Kooiman Apparatenbouw bv Baanhoek 196 3361 GN Sliedrecht PO box 10 3350 AA Papendrecht The Netherlands T +31 (0)184 42 28 33 F +31 (0)184 42 23 52 E info@kooimanbv.nl W www.kooimanbv.nl
Kooiman Apparatenbouw b.v. is a manufacturer of process equipment like shell & tube heat-exchangers and pressure vessels for the oil & gas, chemical and petro-chemical industry. Our clients are mainly companies in petrochemical and power industry. We are manufacturing Shell & Tube heat exchangers in all known TEMA types, Air Coolers and also repairwork of heat exchangers is part of our production
Our products are manufactured by very well trained and skilled craftsman with
program. Pressure vessels, including internals and dressed when required are
extensive experience in field of metal working and working with state of the art
manufactured up to a wall thickness of 80 mm and in diameters up to 4.000 mm
machinery.
and weights up to 30 tons.
Welders are qualified to all processes including internal bore welding.
All equipment is manufactured in a very wide range of materials from plain Carbon steel and Stainless steels up to more exotic materials like Nickel and
All the above is monitored by a quality system which is certified by Lloyds QA to
Copper alloys and Titanium.
ISO 9001 also to PED module H/H1 and ASME U-stamp.
All in solid or clad / weld-overlay execution. We are able to perform the mechanical design to all known design codes and client specifications. For heat exchangers we also perform heat balance calculations in accordance with HTRI. All drawings are made in Auto-Cad.
34 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 34
03-12-13 13:57
KROHNE Nederland bv Kerkeplaat 14 3313 LC Dordrecht PO box 110 3300 AC Dordrecht The Netherlands T+ 31 (0)78 630 62 00 F + 31 (0)78 630 64 05 E infonl@krohne.com W www.krohne.com
KROHNE is a global leader in the area of development and production of innovative and reliable measuring technology and provides measuring solutions for all industries imaginable. KROHNE was founded in 1921 in Duisburg, Germany and has its own factories and sales offices in more than 60 countries worldwide. Thanks to years of experience, KROHNE is familiar with the most diverse The Dutch sales and service organisation is situated in Dordrecht, at the same
applications. Our specialists are therefore able to give you excellent advice on
location as the largest factory for magnetic inductive and ultrasonic flow meters
which solution is suitable for your application.
in the world: KROHNE Altometer. This is also where KROHNE’S own calibration circuit is located. Approximately 60,000 instruments are produced and calibrated each year, varying in diameter from 2.5 mm to 3 metres.
K
Kuehne + Nagel nv Lloydstraat 35 3024 EA Rotterdam PO box 1294 3000 BG Rotterdam The Netherlands T +31 (0)252 46 75 90 E knnl.oilandgas@kuehne-nagel.com W www.kuehne-nagel.com
Our dedicated Oil & Gas staff (more than 600) within the worldwide network ensure that your shipments are in safe hands wherever in the world. Kuehne + Nagel’s Oil & Gas capabilities encompass all transportation services to move your freight throughout the entire supply chain. Kuehne + Nagel’s Oil & Gas capabilities help energy organizations manage logistics strategy and operations across functional areas, including order man-
Kuehne + Nagel provides:
agement, transportation management, physical distribution and supply chain
• Supply Chain Management
security.
• Rig & Maritime Support • Supply Base to Base Logistics
We can help you leverage logistics resources to improve customer fulfillment and
• Project Management
capitalize on new market opportunities.
• Key Account Management Putting the Energy into your Supply Chain!
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 35
35
03-12-13 13:57
LBP|SIGHT Kelvinbaan 40 3439 MN Nieuwegein PO box 1475 3430 BL Nieuwegein The Netherlands T +31 (0)23 231 13 77 E info@lbpsight.nl W www.lbpsight.nl
With more than forty years of experience and employing about 100 professionals, LBP|SIGHT has all the expertise to excel in creating smart, practical solutions. At the same time our company is small enough to guarantee personal attention, short communication lines and tailor-made solutions. This constitutes an ideal
By combining our expertise on industrial engineering, building physics, and envi-
mix, as projects become increasingly more complex. Knowledge is crucial, but
ronmental aspects, we make practical, sustainable and integrated energy saving
even more important is the ability to solve problems as a whole and intertwined.
solutions possible. In doing so, we improve the cost and energy efficiency of both
In the end, it is all about the puzzle, not about the pieces.
industrial processes and (non-)residential, and industrial buildings.
The art of saving energy is not simply reducing your energy consumption, but to
Through our association with branch organisation Stichting Adviescentrum
do that in an economically sound way. Saving energy is primarily a technological
Metaal, we are consulting partners specifically for entrepreneurs within the
challenge, both for industrial production processes and the energy efficiency of
metal and metalworking industry. Together we pave the way to ecodesign and
buildings.
sustainable produ
L
Lovink Enertech bv Lovinkweg 3 7061 DT Terborg PO box 111 7060 AC Terborg The Netherlands T +31 (0)315 33 56 00 F +31 (0)315 34 15 47 E info.le@lovink.com W www.lovink-enertech.com Contactpersoon: Export Manager Dennis Jansen (d.jansen@lovink.com)
Solution provider for the energy network
Reliable products and innovative solutions for specific problems, that is the challenge that we are working on every day. Take a look at our worldwide projects on
Lovink Enertech specialises in medium voltage accessories. For more than 90
the website: www.lovink-enertech.com
years, our cable joints have been used with great success on the electricity grid. The LoviSil速 fluid silicone joints adapt to all cable configurations and cable types and this technology offers the highest network reliability. Last but not least: the cable joints are hydrocarbon-resistant and can be installed without the need of external heat sources. Our extensive market knowledge and customer-specific engineering possibilities often lead to smart solutions. To maintain the paper insulated cable network Lovink Enertech recently developed an LoviSil速 oil refill joint for chemistry parks. With this transition joint the cable is continuously fed with oil, providing the paper-insulated cables with optimum protection.
36 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 36
03-12-13 13:57
M&I-Labtech bv Tankhoofd 7-8 3196 KE Vondelingenplaat RT The Netherlands T +31 (0)10 263 07 77 F +31 (0)10 416 09 27 E info@mi-labtech.com W www.mi-labtech.com
M&I-Labtech is specialized in the design, engineering, supply and installation of turnkey laboratories, tailor made to clients sampling and analytical requirements. The company has since 1993 executed more then 300 projects, worldwide and for a large number of 1st class international companies. Our clients can be found among international EPC-contractors, industrial enterprises and international governmental organizations. “One stop shop”, M&ILabtech takes responsibility for supply of all laboratory equipment as well as for the installation and commissioning on site. Furthermore we can give the necessary training to operators. Key features: • Technical knowledge of laboratory equipment requirements • Extensive experience with project documentation requirements • Worldwide network of suppliers, agents and contacts • Worldwide references in laboratory projects
M Mechanische Industrie Menzing
THERE’S A WORLD TO
EXPLORE
Nijverheidsstraat 5 7482 GZ Haaksbergen PO box 123 7480 AC Haaksbergen The Netherlands T +31 (0)535 72 39 15 F +31 (0)535 72 39 25 E j.veenhoven@menzing.nl W www.menzing.nl
In roughly 50 year of its existence, Mechanische Industrie Menzing has developed into a leading specialist in the processing of exotic materials into high value customer-specific products and high value customer-specific (sub) assemblies.
LEADING SPECIALIST IN THE PROCESSING OF EXOTIC MATERIALS
Our customer base is made up of well-known international businesses that supply applications for the offshore, petrochemical, oil and gas extraction, vacu-
Contact:
um technology and high pressure sectors, amongst others. Applications that have E.van Engelenhoven, General Manager been developed based upon years of intensive research and are used under
Tel: +31 (0)53 5723915
extreme and highly demanding conditions. understandably, this has farreaching consequences for the requirements that have to be exacted on the manufacturing process. We understand these requirements and have incorporated them into our organization. Material management and effective control over all process stages are combined with special expertise in the machining of exotic materials. As a result, we are able to guarantee a very high level of reliability, speed and flexibility. We would be pleased to examine with you what possibilities exist for the mutual collaboration. Stamp Authorized By Lloyds and TuV
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 37
37
03-12-13 13:57
Merford Noise Control Franklinweg 8 4207HZ Gorinchem PO box 160 4200 AD Gorinchem The Netherlands T +31 (0)183 67 50 00 F +31 (0)183 62 64 40 E info@merford.nl W www.merford.nl
Merford has a unique position when it comes to reducing noise in the environment. For practically every situation, Merford designs a solution to noise problems and guarantees an acoustic end result. Merford has more than 35 years experience in supplying custom-made noise control solutions, considering also conditions like ventilation and fire safety. Solutions Reducing noise in power / energy industry concern e.g.: consist of sound insulating enclosures, silencers, (acoustic) ventilation grills,
• Steam / gas turbines
acoustic doors, or a combination of these products.
• Transformers / transformer rooms • Engines / engine rooms • Boilers • Cogeneration stations • Compressors • Cooling systems / condensors • Pumps • Valves • High, medium and low voltage areas • Electricity substations
M
• Linking stations
MFE Loubergweg 7 6961 EJ Eerbeek PO box 49 6960 AA Eerbeek The Netherlands T +31 (0)313 67 46 74 F +31 (0)313 67 46 75 E info@mfe.nl W www.mfe.nl
Best Solutions for Energy MFE MFE is a customer focused organization able to offer fully traceable and flexible solutions for the oil and gas, power generation, wind energy, offshore and maritime markets.
Machining MFE produces large high-precision shafts, rollers and machine parts. With
Engineering
its wide array of machinery, work pieces up to 20 meters and 100 Ton can be
From the start of the design phase, our team of experienced engineers works
handled. Machining includes turning, milling, grinding, dynamic balancing and
closely together with you in order to-along with our extensive knowledge of pro-
deephole drilling.
duction processes- propose the best possible solution. Dedicated project managers are your one point of contact.
Assembly and Maintenance Our VCA* 2008/5.1 certified mechanics, works on in-house assembly projects, as
Construction
well on location for the maintenance, service and repair of industrial installa-
MFE is NEN/EN 3834-2 certified and our skilled certified welders, produce com-
tions.
plex welded constructions in compliance with LRS, ABS, DNV, BV and other certify- To be able to comply to your quality standards with a focus to create a sustainable ing body standards.
industry MFE is ISO 9001-2008 and ISO 14001-2004 certified.
38 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 38
03-12-13 13:58
NEM Energy bv Kanaalpark 159 2312 JW Leiden PO box 162 2300 AD Leiden The Netherlands T +31 (0)71 579 24 44 F +31 (0)71 579 27 92 E info@nem.nl W www.nem-group.com
NEM Energy b.v. is a preferred partner for custom made solutions in the field of Heat Recovery Steam Generators (HRSGs), Industrial and utility Boilers and related equipment. We discern ourselves from our competitors by developing custom made products and solutions which, due to our know-how, are unique or indispensable to our clients. NEM supplies custom made solutions regarding
NEM specializes in HRSGs, Direct Fired Boilers, Process Boilers and components
HRSGs for power generation and Industrial and utility Boilers for applications
for Power Plants like Diverters and Dampers. NEM also offers Engineering and
throughout the world. NEM’s HRSGs take up the largest portion of the company’s
Maintenance Services.
activities. The firm’s driving forces are its distinctive know-how and continuous
As a globally leading company NEM maintains a high standard regarding the
technological innovation, with an eye for new applications such as steam genera-
quality of services and products and the know-how and dedication of over 550
tion for solar power applications.
employees. NEM operates through business units in the Netherlands, Germany, united States, Dubai and Malaysia.
N
New Cosmos - BIE bv Maxwellstraat 7 1704 SG Heerhugowaard The Netherlands T +31 (0)72 576 56 30 E sales@newcosmos-europe.com W www.newcosmos-europe.com
New Cosmos - BIE is a supplier of gas detection equipment mixing high qualified gas detectors with smart forms of communications started in Europe with the range of detectors for the Semiconductor Industry as their main target. Since effectively February 2011, we are a part of the New Cosmos organization,
Sensor features:
whilst continue the developments of products for the European Market combin-
• Unique selectivity
ing the excellent technology from both sides. Meanwhile the company developed
• Long life time
a European wide organization with representatives and service organizations in
• Low operational cost
many countries. With the parent company based in Japan we serve beside Europe • Suitable for use in remote areas also customers in the Middle East.
• Easy to maintain • On board self check functions
Solutions for the following markets:
• Perfect integration in various models
• New Energy Markets • Gas & Oil Exploration
Sensor Development:
• Chemical & Petrochemical
• In house development in the laboratories in Japan
• Automotive Industry
• Over 50 years of sensor knowledge
• Laboratories
• Development of sensors following the new chemicals and gasses
• Robotics
introduced at our clients.
• Micro Electronics • PV Industry
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 39
39
03-12-13 13:58
NMI Certin bv
.
The Netherlands T +31 (0) 78 633 23 08 E nmi@nmi.nl W www.nmi.nl
NMi Certin B.V.: World leading certification institute NMi is the independent expert for testing, certifying, calibrating and training in the fields of metrology and gaming. NMi offers more than just a service – we guide you towards the fastest, trouble-free market entry even for special applications and other variations. As one of the leading metrological institutes globally, NMi is an important part-
Our Complete Services in Testing, Auditing & Certification
ner for governments and international groups (NoBoMet, OIML, WELMEC, IEC,
• Worldwide market access (CE, OIML, MID, IEC, EN)
CENELEC), which ensures that we are always informed about the latest require-
• CE type approval for all measuring instruments
ments and legislation.
• Dedicated knowledge on Energy and Oil&Gas measurement • Software & Communication protocols
NMi certificates and test reports are accepted worldwide. Many foreign institutes
• Advice and Training
and governments immediately grant approval for the relevant country on the
• Design Review Measuring Installations
basis of the NMi certificate and our test reports, without requiring that the mea-
• Life Cycle Management
suring instrument be re-tested. NMi offers added value with speed, knowledge, reliability and acceptance through innovation in procedures and facilities.
N P
Petrogas Gas Systems Harderwijkweg 2 2803 PW Gouda PO box 20 2800 AA Gouda The Netherlands T +31 (0)182 56 53 95 F +31 (0)182 56 53 95 E sales@petrogas.nl W www.petrogas.nl
Petrogas design and manufacture skid mounted systems for the gas/energy distribution companies and power industry. With an experience of 60 years Petrogas supplied their installation for power plants and gas distribution companies worldwide, from Mexico to Singapore and from the Russia to Australia. The installations can be supplied according to all international rules and regulations of local gas/energy distribution companies.
• Special skid mounted process units. - Gas Dehydration and glycol regeneration system.
• The product range is:
- Gas mixining installations.
Natural gas receiving stations consisting of ESD inlet valves, condensate removal, filtering, heating, pressure reducing, custody transfer metering & analyzer
The skid-mounted concept reduces the erection, commissioning and start-up
sections.
time on the site. Training programs for the operators can be provided.
• Modular skid mounted units around the gasturbine. - Final runs with filters and/or filter/separators, metering sections, electrical start-up heaters and efficiency heating with hot water or steam. - Fuel oil installations such as unloading, forwarding and transfer pump skids to the gasturbine, including heating and metering. - LPG units for the startup or continuous operation of gasturbines.
40 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 40
03-12-13 13:58
Power Piping International De Sonman 15 5066 GJ Moergestel PO box 464 5004 DC Tilburg The Netherlands T +31 (0)13 595 29 23 F +31 (0)13 595 29 24 E casper@powerpiping.nl W www.powerpiping.nl
Power Piping International BV is part of VOC Holding BV located in Moergestel, The Netherlands. Power Piping Int’l BV (ISO 9001:2008) is actively involved in the design, detail engineering, manufacturing and supply of a complete line of insulated and noninsulated pipe support systems from our facility in Moergestel, The Netherlands.
Products and services:
Also part of VOC Holding BV is Insu-W-Rapid BV Thermal Insulation Products;
• POWERFOAM SUPERSCRIPT High Density Polyurethane insulated pipe supports
a supplier of a complete package of ancillary materials for the thermal insula-
and anchors are specifically developed for low- and cryogenic temperature pip-
tion industry worldwide. Insu-W-Rapid BV is ISO 9001:2000 certified and offers a
ing systems. Fully insulated POWERFOAM™ cryogenic pipe anchors, fully tested
one-stop- shop concept for the insulation contractor with products ranging from
under load and cryogenic conditions by independent laboratories with new
jacketing, banding, fastening and finishing products. Quality products against competitive pricing, short communication lines, customer satisfaction and excel-
formulated high-density foams with a zero ODP for ecological purposes. • Timtherm® insulated pipe supports for high temperature piping systems. Engineered high density calcium silicate pipe supports that prevent hot spots
lent logistical location are key words.
in high temperature piping. • Permali pipe supports • Fabricated pipe supports
RebelGroup Advisory
sustainable supplier
Rebel Wijnhaven 23 3011 WH Rotterdam The Netherlands T +31 (0)10 275 59 95 E info@RebelGroup.com W www.rebelgroup.com
P R
Rebel is a platform of entrepreneurs which want to bring about valuable changes in the world. At the intersection of public and private initiative, as our passion is where social values and private entrepreneurship come together. This complex relationship between public interests and private realities is specifically evident within the market of energy generation and savings. We contribute to the effective realisation of sustainable energy projects in the Netherlands and beyond. Through public-private collaborations, the financing of complex business
We believe changing over to sustainable energy isn’ t a luxury, but a necessity.
cases, structuring, contracts, sustainable purchasing, DBFM contracts, shaping
This change can only be realised in a professional business-like manner where
Socially Responsible Enterprising, smart financing and the consideration for
front runners - both public and private - take the lead. By effectively identifying
societal interests in intelligent incentive structures. For small and medium sized
risks and persisting with a correct role fulfilment in agile partnerships. We would
companies, large companies and government authorities.
gladly translate the complex task into a viable business case together with you. NO CHANGE WITHOuT A REBEL.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 41
41
03-12-13 13:58
ONE PARTNER FOR LIFE
WWW.STORKTECHNICALSERVICES.COM
STS0577_Rej_adv_spread_FME_v4.indd 1 042_43_stork.indd 2
31-10-13 14:47 03-12-13 14:54
STS057
3 14:47
STORK TECHNICAL SERVICES IS THE EXPERT PROVIDER OF ASSET OPTIMISATION AND INTEGRITY MANAGEMENT SERVICES TO THE GLOBAL OIL & GAS, CHEMICAL AND POWER INDUSTRIES. Stork Technical Services is dedicated to improving asset integrity for clients throughout the asset lifecycle. Our services are tailored to help our clients optimise performance by maintaining, repairing and modifying major assets. We work as one team; a team committed to continuity, quality, innovation and cost efficiency to ensure that we add value throughout the asset lifecycle with safety always as our first priority. For our clients, we aim to be their ONE partner for life.
ASSET LIFECYCLE INTEGRITY PARTNER
STS0577_Rej_adv_spread_FME_v4.indd 2 042_43_stork.indd 3
31-10-13 14:47 03-12-13 14:54
DE REGT Marine Cables bv Zaag 2 2931 LD Krimpen aan de Lek The Netherlands T +31 (0)180 66 88 00 F +31 (0)180 66 88 99 E info@deregtcables.com W www.deregtcables.com
DE REGT Marine Cables is -and has been- a prominent name in the design and manufacture of Custom-engineered, specialty, dynamic or static cable solutions used in subsea applications. The company boasts over 90 years of technological innovation and strength around cable design. These have been applied in many areas; the Oil & Energy sector, Defence, Seismic Exploration and scientific projects. The company’s engineering design departments include all the disciplines required for the specification and design of cable systems for subsea and surface applications. DE REGT Marine Cables has a strong team of engineers, capable of working on conceptual design studies as well as working on a project level, translating concepts to products.
Royal HaskoningDHV
R
sustainable supplier
Barbarossastraat 35 6522 DK Nijmegen PO box 151 6500 AD Nijmegen The Netherlands T +31 (0)24 328 42 84 F +31 (0)24 323 93 46 M info@rhdhv.com W www.royalhaskoningdhv.com
The world is changing, global energy demand increases. Royal HaskoningDHV is committed to work with our clients in partnerships to achieve sustainable and innovative solutions in an increasingly complex society. We work in close cooperation to overcome issues in supply, demand, energy security and decarbonisation, utilizing innovations such as carbon capture storage, algae technology, biogas
About Royal HaskoningDHV
recovery from waste and low head hydro. Within the energy sector we are actively We are a leading independent, international project management and engineerinvolved in areas such as renewables, biomass, transmission and resource recov-
ing consultancy service provider. Specialising in planning and transport, infra-
ery. The global and local expertise and experience of our professionals allow us
structure, water, maritime, aviation, industry, energy, mining and buildings, each
to consider all technical, logistical, environmental and economic aspects of your
year we contribute to the delivery of some 30,000 projects around the world. With
project.
our 7,000 staff we cover more than 35 countries through a fully integrated international office network. As leaders in sustainability and innovation, we are deeply committed to continuous improvement, business integrity and sustainable development, and work with our clients, stakeholders and communities to enhance society together.
44 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 44
03-12-13 13:58
SARENS NEDERLAND bv Pieter Hoebeeweg 99 NL 3316 BT Dordrecht PO box 1055 NL 3300 BB Dordrecht The Netherlands T : +31 (0)78 648 29 29 F : +31 (0)78 631 31 81 W : www.sarens.nl E : info@sarens.nl
In addition to straightforward crane rental, Sarens also offers total solutions in the field of horizontal and vertical transport, domestically as well as internationally. By bundling the strengths of the versatile companies of the Sarens Group, we are in a position to offer a solution to any challenge. The companies that are part of the Sarens Nederland BV are Sarens Steel Erectors and Sarens Materieel. Safety and quality are an important part of our services. We are NEN-EN-ISO 9001:2008, OHSAS 18001:2007 and certified for SSC - Petrochemical Industry. By involving Sarens at an early stage, we can assist you from the very beginning in finding the most efficient solutions, technically as cost based. Safety, quality and commitment are key considerations in this regard and therefore offer you the assurance of achieving optimal results.
Saval Fire Protection Huifakkerstraat 22 4815 PN Breda PO box 3499 4800 DL Breda The Netherlands T +31 (0)76 548 70 00 F +31 (0)76 541 79 22 E systems@saval.nl W www.saval.nl
S
Protection of life and capital equipment requires a professional and specialized system. Saval offers custom made solutions, specially designed in accordance with client specifications, including supervision and commissioning for your fire & gas detection and fire suppression systems. From then ‘till now
Storage tank protection
Saval started manufacturing extinguishers back in 1925 and is still a leading
Saval BV is an experienced leading company for fire protection of storage tanks.
company for fire fighting equipment such as:
Especially our CFI rim seal protection systems are famous all over the world.
fire detection and fire suppression combined in total integrated fire control and management systems. Constant care for quality and reliability of the products is a main company rule. ISO 9001 and AQAP 4 certifications are proof of this philosophy. Saval is involved in various aspects of safety, environment and economy. Never ending changes in points of view keep our design and research teams up to date. Due to flexibility, experience and a willing ear in listening to the demands from the field, Saval is a very steady business partner for Oil & Gas fire protection projects. Since 2010, Saval is part of the SK FireSafety Group.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 45
45
03-12-13 13:58
Schelde Exotech bv Koningsweg 2 4381 NA Vlissingen PO box 531 4380 AM Vlissingen The Netherlands T +31 (0)118 48 59 01 F +31 (0)118 48 59 59 E info@exo.schelde.com W www.exotech.nl
Member of the VE Group bv
Schelde Exotech was founded in 1998, and has arisen from AKF Goes, Schelde Boiler Division and Schelde MT-Products. With the specific knowledge of these three companies a wide range of customers has been established in the chemical and petrochemical industries, electrical power plants, uranium enrichment facilities and research institutes. Among our customers are: DOW Chemical, Shell, yara, Essent, urenco, CERN, EPZ, Eastman, Indorama, DSM and many other well
Schelde Exotech possess several quality certificates such as ISO 9001:2000,
known companies.
ASME VIII Div 1&2, PED and China Manufacturing License. Schelde Exotech located in Vlissingen - The Netherlands, covers 13,000 m2 pro-
The engineers of Schelde Exotech develop, in consultation with the customer,
duction workshops, including two cleanrooms in which equipment can be manu-
products which are produced in Vlissingen. They work with 3-D engineering soft-
factured in temperature and humidity controlled conditions. Repair and replace-
ware and the production department uses sophisticated production techniques
ment of this equipment can be done in our workshops in Vlissingen as well as at
such as waterjet cutting, nc controlled machining and electron beam welding.
the customer’s location. Shipments are possible by road and open water.
The main activities are concentrated on the processing and welding of exotic and high alloyed materials. Nearly all conceivable welding processes are qualified and applied.
Seaway Heavy Lifting c/o Albert Einsteinlaan 50 2719 ER Zoetermeer The Netherlands T + 31 (0)79 363 77 00 E ba@shl.nl W www.shl.com.cy
Seaway Heavy Lifting is a leading offshore contractor in the global Oil & Gas
S
and Renewables industry, offering tailored Transport & Installation (T&I) and Engineering, Procurement, Construction and Installation (EPCI) solutions. By utilizing our highly skilled and motivated workforce, quality assets and continuous focus on new technologies we provide our clients with safe, effective and added value solutions. Seaway Heavy Lifting operates crane vessels Stanislav yudin and Oleg Strashnov, which have a revolving lift capacity of 2,500mt and 5,000mt respectively. Both vessels are state of the art and certified to the highest standards. Seaway Heavy Lifting operates globally focussing on the North Sea, Mediterranean, America’s, Africa and Asia Pacific/Middle East. Seaway Heavy Lifting is a Subsea 7 Joint Venture company
46 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 46
03-12-13 13:58
SGS Nederland bv Industrial Services Malledijk 18 3208 LA Spijkenisse PO box 200 3200 AE Spijkenisse The Netherlands T +31 (0)181 69 36 30 F +31 (0)181 69 35 86 E nl.ndt.sales@sgs.com W www.nl.sgs.com/industrial
Industrial Services, as one of the biggest Business Lines of the SGS Group, is a global service provider for technical verification, inspection, testing and conformity assessment, instilling confidence to clients. SGS support the integrity, safety and reliability of your activities, equipment and operations with technical solutions.
We have decades of experience and some remarkable references in serving key
We ensure that our customers’ installations, material, equipment, facilities and
industries, such as:
projects meet all quality and performance requirements, whether they are regu-
• Construction Industry
latory, voluntary or customer based. We have a comprehensive suite of services
• Industrial Manufacturing & Trade
to help industrial and manufacturing processes run smoothly – whether you are
• Oil, Gas and Petrochemical Industry
fabricating components, or finished products to be sold directly to consumers.
• Power Generation and Transmission
SGS is actively involved in a very broad range of services, such as In-Service
• Wind Energy
Inspections (Tank storage inspection), Non-Destructive Testing (Radiography,
Industrial Services is your local partner with global experience and connections.
ultrasonic Testing, Guided Wave Inspection, Time of Flight Diffraction - ToFD),
Our strength lies in understanding our customers’ operational challenges and
Product Certification (CE-Marking, Pressure Equipment Certification, Lifts
adding value by providing dedicated solutions.
and Machinery Directive). Thanks to their experience and wide-ranging skills, our experts are adept at helping you build a better, stronger, more competitive and profitable business.
Sinus Jevi Electric Heating Nijverheidsweg 2 1671 GC Medemblik The Netherlands T +31 (0)227 54 91 00 F +31 (0)227 54 91 50 E info@sinusjevi.com W www. sinusjevi.com
Sinus-Jevi Electric Heating bv
S
Is a leading company in the field of industrial electric heating equipment and installations. Design and manufacturing of high quality heating installations for the offshore, petrochemical and process industries are areas where Sinus-Jevi Electric Heating B.V. has built up a reputation over the years. Flameproof heaters complete with control panels are certified according to the
Special applications:
ATEX 94/9/EC directive. Furthermore the design and manufacturing takes place
• Fuel gas pre and after heating
according to customer specifications to the codes of ASME VIII - AD 2000 - EN
• Glycol regeneration boilers
13445 - RToD Stoomwezen - PD 5500 and in accordance with the PED directives.
• Heating mineral, heavy and heat transfer oil • Heating and super heating hydrogen, nitrogen, regeneration gas, steam etc.
The manufacturing programme contains:
• Load resistors
• Flameproof immersion heater batteries • Flameproof heater vessels
They find themselves lucky to have a professional staff with expertise in working
• Flameproof air heaters
on projects for international contractors. Needless to say they are very eager to
• Flameproof gas heaters
solve your heating problems safe and sound. So if you have one, call one of the
• Miscellaneous industrial appliances
engineers of Sinus Jevi Electric Heating. you can rely on them.
• Control panels NEN-EN-ISO 9001:2000, ATEX 94/9/EC, IECEx and GOST R certified Member of the Swedish Nibe Group
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 47
47
03-12-13 13:58
Smit Transformatoren Groenestraat 336 6531 HJ Nijmegen PO box 9107 6500 HJ Nijmegen The Netherlands T +31 (0)24 356 89 11 F +31 (0)24 356 85 98 E info@smit-trafo.nl W www.smittransformatoren.nl
Smit Transformatoren B.V. is an internationally orientated company which has designed and manufactured large power transformers since 1913 in Nijmegen. Smit Transformatoren B.V. is part of the SGB-SMIT GROuP and as a group we are capable of designing and manufacturing transformers from 50kVA up to 1200 MVA and voltages up to 800kV. Our customers are mainly energy generation, distribution and transmission companies worldwide. Although Smit has
Final installation at sites worldwide is managed by Smit in cooperation with local
been in business for almost 100 years, the company is innovative and always
suppliers. Smit Transformer Services (STS) is a separate business unit, taking care
looking for new opportunities to improve and renew. Our main strength is the
of after sales and transformer refurbishment, diagnostics and maintenance of
proven combination of excellent technology, efficient manufacturing processes
transformers of all different brands.
and quality awareness. Our manufacturing portfolio consists of: Complex and unique transformer designs and calculations enable Smit to meet
• Grid Transformers
individual customer demands and we link fully integrated design programs to
• Generator Step-up Transformers
a very modern production and testing environment. Our test programs include
• Auto Transformers
electrical and functional tests to comply with the internationally recognized stan- • Phase Shifters dards such as IEC and ANSI. We include specific tests regarding temperature rise,
• Series and Shunt Reactors
impulse voltage withstand and noise measurements.
- Quad Boosters
Stork Technical Services Van Deventerlaan 101 3528 AG utrecht PO box 2776 3500 GT utrecht The Netherlands T +31 (0)30 669 17 00 F +31 (0)30 666 47 33 E info.technicalservices@stork.com W www.storktechnicalservices.com
S
Improving performance, reducing cost When you partner with Stork Technical Services, you get more than just effective, efficient and safe services. you reap the rewards of our integrated, innovative
An unrivalled support partner
and international approach. And you access the very best in terms of people, pro-
That’s because we’re a partner. A partner that saves you money, speeds up your
cesses and technologies.
operations and solves your problems. We do this by combining several services in one contract. By working innovatively using the latest equipment and techniques.
Through the provision of our unrivalled suite of asset integrity services,
By operating bases around the world. And by employing multi-skilled teams
we partner with operators and tier-one contractors worldwide, we help to deliver: trained to the highest standards in the industry. They minimize interruptions and downtime. They cut the number of suppliers you need, with all the associ• improved HSEQ performance
ated administration that requires. And they lead to safer working practices and
• asset integrity assurance
environments.
• asset lifespan extension • increased operating efficiency
Visit our website www.storktechnicalservices.com to view our service portfolio
• energy efficiency solutions
and find out how we can add value for you.
48 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 48
03-12-13 13:58
Strukton Systems – Energy Solutions Welbergweg 60 7556 PE Hengelo PO box 258 7550 AG Hengelo The Netherlands T +31 (0)74 255 88 00 E info@struktonsystems.com W www.struktonsystems.com
Thank you for taking a moment to read about our company, our energy solutions divisions in particular, and the things we can offer. We, Strukton Systems, are an all-round international contractor with in-house engineering and consultancy. Our Energy Solutions division specialises in high voltage power generation, transmission and distribution. Our roots go back to the company of “Holec”, which was established in the 1960s. We bring along the Holec experiences to our current projects, developments and innovations. We have a highly internationally oriented approach and cover the entire range from engineering up to commissioning. Our focus is on power plants, on- and offshore substations and other forms of electrical infrastructure. Our expertise and the quality of our work is evidenced by the many successful projects concluded and by the repeated assignments from customers. Recent projects include the offshore Riffgat and Dantysk substations. Naturally, we hope to have aroused your interest. Feel free to call us or send us an e-mail if you have any questions or wish to know how we can help you.
Sulzer Turbo Services Rotterdam bv Moezelweg 190 3198 LS Europoort Rt. The Netherlands T +31 (0)181 28 20 00 F +31 (0)181 28 20 02 W www.sulzerts.com
Sulzer Turbo Services provides comprehensive repair, refurbishment, and maintenance on rotating equipment on a global basis. As the leading non-OEM provider
S
of turbines, compressors and other rotating equipment repair services, Sulzer Turbo services can offer reliable, effective and efficient solutions to problems on any brand of thermal rotating equipment. Our services are available 24 hours a day, 365 days a year. Field Service:
Shop service:
As an independent specialist Sulzer Turbo Services Rotterdam provide services
Sulzer Turbo Services Rotterdam offers all basic repair and overhaul services such
as major inspections, repair and maintenance for steam turbines, centrifugal
as, manufacturing of blades, nozzles, diaphragms and impellers, advanced weld-
compressor, recip compressors, expanders and other thermal rotating equipment. ing repair for rotors, coatings and high speed balancing. In case repair is not posThis service can be performed on scheduled or unscheduled emergency mainte-
sible Sulzer Turbo Services Rotterdam has the capabilities, experience and techni-
nance.
cal know-how to manufacture new parts based on reversed engineering.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 49
49
03-12-13 13:58
Tss4U bv Looyenbeemd 3a 5652 BH Eindhoven PO box 8583 5605 KN Eindhoven The Netherlands T +31 (0)40 235 17 02 F +31 (0)40 235 18 81 E info@tss4u.nl W www.tss4u.nl
Tss4U is specialized in customized solar power systems for industrial applications. Our head office is based in the Netherlands. We serve our Middle East customers through our affiliate Tss4U ME in Abu Dhabi. We pro-actively serve our other markets worldwide with selected partners. Industrial applications Total cost of ownership
• Offshore platforms
Tss4u meets your power requirements in remote areas by simply converting the local
• Pipelines
amount of sun into the required amount of energy while meeting stringent functional
• Valve stations
specifications in terms of operation, safety, quality and lifetime expectancy. From design • Wellheads to after sales, working with Tss4u results in an attractive total cost of ownership.
• Telecom stations • Security systems
Hazardous area’s (Ex-proof)
• Instrumentation
Tss4u is one of the few solar companies worldwide that is certified for the design, • … engineering and supply of ATEX Zone 1 complete systems. With carefully selected suppliers, our own ATEX Zone 1 certified solar module and our extensive experi-
Quality
ence in this very demanding application area, we help our customers meeting
Tss4u is ISO 9001:2008 certified.
their power requirements in hazardous areas.
Van Beest bv Industrieweg 6 3361HJ Sliedrecht PO box 57 3360AB Sliedrecht The Netherlands T +31 (0)184 41 33 00 F +31 (0)184 41 49 59 E sales@vanbeest.com W www.vanbeest.com
Van Beest is a leading manufacturer and supplier for a complete program of
T
standard fittings for chain and steel wire rope. For over 90 years the production of high tensile shackles has been our core business. Van Beest manufactures these high quality Green Pin® shackles in its own pro-
V
duction facility in The Netherlands. A genuine “Made in Holland” product.
Furthermore many shipbuilders and owners worldwide choose Green Pin®
Since 2007 the Excel chain accessories factory in France is part of the Van Beest
products for their reliability and high quality. Apart from maritime applica-
International group. In this factory we produce an extensive program of chain
tions, our products are used in various other environments. For example in the
accessories, like for example: grade 8 and 10 hooks, lifting points, swivels etc.
construction of civil works. And there are countless other applications. Any kind
Van Beest has branches in Germany, France and the uSA, and exports to more
of lifting, lashing, mooring and joining can be done with Green Pin® products.
than 80 countries worldwide.
Therefore you will find them in almost any kind of industry.
A very demanding user group is the offshore industry. In oil and gas production, safety is all-important. In this high-risk environment, one can rely on the continu- Green Pin® your reliable partner! ous high quality of Van Beest products. For this reason Green Pin® Standard and Polar shackles have DNV 2.7-1 Type Approval.
50 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 50
03-12-13 13:58
Van Dam bv PO box 53 4793 ZH Fijnaart The Netherlands T +31 (0) 167 52 96 00 F +31 (0) 167 52 96 01 E info@van-dam.nl W www.van-dam.nl
Expertise & Focus in the Oil & Gas Industry Van Dam provides both the external and internal architectural fit-out for Oil & Gas offshore structures. The architectural package is part of our ‘one-stop shopping’ concept. Fire and Blast protective products and solutions: to protect personnel and critical safety equipment! The Total Concept Our core business and focus in the Oil & Gas Industry! Focus is on the complete external and internal architectural package, we supply features from our own product range: blast walls, fire walls, doors, windows,
Fire rated doors
the complete internal partitioning, winterizing walls and all interfacing work.
Watertight and gastight doors
Our services include the design and engineering, manufacturing, supplying the products and even supervising the installation on site. Full installation can also
Windows
be incorporated!
Offshore Windows A60 / H60 / H120 rated
Blast & Fire Walls
Typical applications for our solutions: Living Quarters (LQ) and protective com-
Blast-resistant or relieving walls
partments in the Oil & Gas Industry, both on and off-shore.
Fire-rated walls & cladding
• Production Platforms, fixed and floating
Jet-fire walls
• TLPs, Spars and Semi Subs
• FPSO, FSO
• Typical offshore topside modules
Winterizing walls Van Dam, serving you with high-level integrated solutions. Designed and engiDoors Both external and internal
neered to meet the requirements of the application. Let our experience be your
Blast-resistant doors
added value!
Van Heck PO box 14 8390 AA Noordwolde The Netherlands T +31 (0)561 43 17 39 F +31 (0)561 43 17 66 E info@vanheckgroup.com W www.vanheckgroup.com W www.seatrophy.com
Van Heck is the specialist in ‘Watermanagement’. We engineer, design, develop, construct, install and operate diesel, hydraulically and electrically driven pump units, siphon arrangements and ballasting systems. Within our scope of activities, we provide pumps for offshore cable trenching, dredging works, load-out and float-over operations, temporary sewer redirection,
The Sea Trophy, Van Heck’s newest innovation, expands our possibilities even fur-
industrial cooling installations, fire fighting, polder drainage, salvage work and
ther. The Sea Trophy is a small, agile, hydraulically driven pump that can be used
pipeline cleaning.
for fast oil recovery. Applications include:
Our rental fleet includes single pump units with capacities up to 8,000 m3/hour
• Oil spill prevention or restriction
and discharge pressures up to 36 bar. Each pump is built to meet the latest noise, • Fast oil transfer for a wide range of oil viscosities emission and environmental regulations.
• Insertion into suitable sounding/venting pipes or in combination with the
In the offshore industry Van Heck stands for a professional and specialised
• ‘Preparedness’ for calamities or simplified off-spec fuel removal.
approach. One of the major advantages of our system is the rapid installation.
• In short, the Sea Trophy is capable of almost limitless ‘green and easy oil recovery’.
V
Milkcan or mobile riser pipe
Depending on the complexity of the project, we can customize our approach to meet our client’s particular wishes.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 51
51
03-12-13 13:58
Van Oord Offshore Wind Projects bv
sustainable supplier
Stationsweg 23 PO box 458 4200 AL gorinchem The netherlands T +31 (0)183 64 27 50 F +31 (0)183 64 27 60 E area.owp@vanoord.com W www.vanoord.com
Van Oord is an international dredging and marine contractor with a dedicated business unit for the Offshore Wind industry. Van Oord Offshore Wind Projects bv serves the wind sector as EPC (Engineering, Procurement and Construction) contractor and as dedicated subcontractor for installation activities for foundations and turbines, cabling and scour protection. Van Oord is well prepared to execute preparatory work activities such as design works and subcontract enquiries in the initial stage of the project before Financial Close. We are a leading EPC contractor in the offshore wind industry with projects such as Princess Amalia Offshore Wind Park, Belwind Phase i Offshore Wind Farm, Teesside (in progress), dan Tysk (in progress), gemini (in progress) and the installation of two meteo masts in the north Sea. Van Oord Offshore Wind Projects has its focus on the north West European market. Van Oord invested in an innovative and advanced Offshore wind farm installation vessel called Aeolus. The Aeolus, available for operations in spring 2013, will be 139 m long, 38m wide and fitted with a crane capable of hoisting 900 tonnes at 30 metre radius.
Van Vliet Trucks Holland Parallelweg Zuid 215 2914 LE nieuwerkerk a/d iJssel PO box 3 2910 AA nieuwerkerk a/d iJssel The netherlands T +31 (0)180 31 26 44 F +31 (0)180 31 91 58 E info@vanvliet.com W www.vanvliet.com
A permanent stock of more than 1500 new and used trucks Since its establishment in 1953, Van Vliet Trucks has maintained the highest standards of quality. Van Vliet has become one of the largest suppliers in Europe. The main reason for this is its permanent stock of more than 1500 trucks. Van Vliet has a comprehensive selection covering most categories, weights and specifications. Van Vliet all over the world
V
Tailor-made supplies
Over the years, we have gained a wealth of experience in the export market.
Van Vliet boasts comprehensive, modern garage facilities. Van Vliet trucks
Over 90% of our products are exported to countries all over the world. Van Vliet
are made to measure, all to the highest standards of craftsmanship and
employs export specialists too, so we can sort out language or customs problems.
strictly according to the customer’s requirements and in accordance with the international quality standard iSO 9001. Spare parts service A rapid spare parts service is a vital feature of our service package. We can always supply new or used parts for all current makes at short notice.
52 FME EnErgy guidE 2014-2015
013-57_profielen.indd 52
03-12-13 16:36
Varco BJ bv Nijverheidsweg 45 4879 AP Etten - Leur PO box 17 4870 AA Etten - Leur The Netherlands T +31 (0)76 508 30 00 F +31 (0)76 504 60 00 E receptie@nov.com W www.nov.com
Varco BJ B.V. is a subsidiary of Houston based National Oilwell Varco, which manufactures complete land drilling rigs and in combination with various shipyards around the world also delivers complete drilling and service packages for the drill ships, semi submersibles and jack ups used for drilling for oil and gas. Our manufacturing plant in Etten - Leur is the head office of the handling tool division. We have at the moment 256 persons working at our manufacturing
We are API 8A,8C and 7K licensed and ABS PQA certified. Our management
plant and offices. The handling tools are used for handling all the tubulars used
system is ISO 9001:2008 certified. All of our equipment complies with the
for various applications during the drilling process.
Machinery and ATEX directives.
The tools can be manual, pneumatic or hydraulic operated. We continuously develop, with our own team of engineers, new systems and tools which makes the work environment on drilling rigs safer and more efficient and are worldwide accepted as the best quality tools by operators and drilling contractors. Our machines do consist for almost 100% of CNC machines and efficient equipment to effect Magnetic Partical Inspection and load testing of all the equipment manufactured.
VECOM GROUP bv Mozartlaan 3 3144 NA Maassluis PO box 27 3140 AA Maassluis The Netherlands F +31 (0) 10 593 02 99 E info@vecom-group.com W www.vecom-group.com
The Vecom group is founded in 1953 and is a family owned company with its origins in the Maritime Industry. Vecom offers her customers a great variety of products and services in cleaning & maintenance of metal surfaces in both the Marine and Industrial market. On-site Services Treatment, Maintenance & Cleaning products
Vecom Industrial Services B.V. has many years of experience in the field of chemi-
The Vecom group manufactures Treatment, Maintenance & Cleaning Products.
cal technical cleaning and the treatment of hazardous waste water. The mobile
Next to production facilities, Vecom operates state-of-the-art laboratories. These
cleaning-units and waste water treatment facilities provide on-site services
laboratories are used for research and development purposes and for handling
worldwide. These services include a.o. boiler cleaning, pre-commissioning and
consultancy demands.
maintenance cleaning services, cleaning of heat exchangers and steam boilers.
Services for Metal Surface Treatment
Vecom is ISO and VCA certified.
V
With 16 locations in northwestern Europe, the Vecom group is the biggest specialist in the area of chemical metal surface treatment. Metal surface treatment services mainly consist of chemical cleaning of stainless steel and carbon steel. Other services are oxygen cleaning, ultrasonic cleaning and cleaning of heat exchangers.
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 53
53
03-12-13 13:58
Verebus Engineering Handelskade 49 2288 BA Rijswijk PO box 1045 2280 CA Rijswijk The Netherlands T +31 (0)70 352 82 00 F +31 (0)70 352 82 05 E verebus@verebus.nl W www.verebus.nl
Verebus Engineering is an engineering consulting firm with clients in the market segments: defence, infrastructure (including rail infrastructure), marine & offshore, aviation and the energy and building sectors. Our activities include consultancy, design, engineering, as built services, managing (hosting) your technical documentation (systems), developing training courses, and training of your staff. We offer support during the complete life cycle As a result we develop and produce technical information which exactly meets of your technical systems and installations. We are independent. If requested or
your needs and wishes, regarding the purpose, the user and the most optimal
required we will work with partners on projects on a complementary basis.
form of the documentation. Examples are: technical manuals/product information; training documentation and computer-based training; (interactive)
Verebus offers a unique combination of:
technical documentation, including help functions and e-books; procedures,
• technical knowledge including a broad variety of engineering processes,
instructions and descriptions; training or maintenance worksheets;
• understanding of the various user groups’ needs and abilities,
explodedview drawings and illustrations for use in catalogues or spare parts
• ability to harmonise the information concerned,
manuals. Verebus Engineering is member of TÜV NORD Group.
• writer skills and ICT experience.
VMB Besturingstechniek bv Veersedijk 79 3341 LL Hendrik Ido Ambacht PO box 4036 2980 GA Ridderkerk The Netherlands T +31 (0)88 681 00 00 F +31 (0)88 681 00 09 E info@vmb-nl.eu W www.vmb-nl.eu
VMB Besturingstechniek offers total solutions in control technology. We do engineering, develop the software, build control panels, take care for the installation and commissioning. We have experience with various manufactures and projects. Industrial automation is determinative for the performance of your machines
V
and equipment. Substantive knowledge of your industry is a condition for the
Are you looking for high quality solutions in control technology? Do you want
development of a solution.
a machine or system to perform optimally? Discover the expertise and years of
VMB Besturingstechniek has an unique position when it comes to control tech-
experience at VMB Besturingstechniek. We design and realize complete control
nology. How extensive, complex and/or international your project is, you will
systems for clients in sectors like water, oil & gas, agro & food etc. We built
always have one contact at VMB Besturingstechniek. That would be a person who
specialized knowledge in these sectors. Share your challenges with us!
is substantively aware of your project. We combine structured project management with inspiring interaction. In that way, we have completed the most wonderful projects already.
54 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 54
03-12-13 13:58
voestalpine Böhler Welding Nederland bv Haarlemmerstraatweg 89 1165 MK Halfweg (NH) The Netherlands T +31 (0)20 448 66 22 F +31 (0)20 448 66 44 E welding.nederland@voestalpine.com W www.voestalpine.com/welding
voestalpine Böhler Welding Nederland bv A complete range of welding fillers ranging from low-to-high alloyed materials including sophisticated alloys. Our expertise in the field of high temperatue and creep resistant applications is based on many years of experience and extensive research into creep rupture behaviour under long period stressing under varied conditions. For constructions this experience guarantees fabricator, surveryor and owner company a high degree of safety. Our products are synonymous with
Experience in applications
quality on the market. We traditionally develop and test our products in close
In oil, gas, petrochemical and power applications we are leading in application
cooperations with our customers, renowed materials institutes and base material experience. Our list of references is impressive in pressure in vessel building, applymanufactures. Products are marketed under various brand names but all carry
ing corrosion resistant layers by strip cladding, piping constructions in P1 up to P92
the guarantee stamp of our group.
and higher temperature resistant base materials, pipeline constructions on- and offshore, offshore constructions needing our duplex - super duplex and titanium alloys etc. We are unique in this field and generally considered as proven best partner for welding applications, everywhere in the world - also in The Netherlands.
Willtéco PO box 48 1723 ZG Noord-Scharwoude The Netherlands T +31 (0)226 313 054 F +31 (0)226 320 222 E info@willteco.com I www.willteco.com
WE DESIGN WE ENGINEER WE MANuFACTuRE WE REPAIR WE INSTALL WE COORDINATE We don’t think problems, we think solutions. So what-ever your needs are, we will One of the cornerstones of Willteco’s service package is the supply of technical deliver. And if we have not thought of it already, our innovation takes over and we components and spare parts for the 24-hour industry. Through our excellence in
V
invent it. We are here to ensure that you can do business and excel at what you
technical support our company grew into an organisation that works round the
do best. Just like us.
clock on design, production, engineering and installation of technically durable
Willteco takes care of the complete technical support; from regular maintenance
solutions. Our specialists can put innovative solutions into practice with their
through the supply of machine parts to technical solutions. Our team of special-
decisive actions. We are in the right place for all your technical and mechanical
ists is always ready to carry out technical maintenance and to provide innovative
problems. Of course, during all our activities we adhere to all the regulations and
solutions. It goes without saying that our company is SCC** certified and our staff
repair your equipment according to API specifications or according to DNV, ABS, or
works by those guidelines. We can now also offer our services throughout Asia.
Lloyds regulations.
W
Willtech Asia operates from Singapore and will carry out our services with the same level of expertise that our customers are used to.
WE WILL SOLVE yOuR PROBLEM!
FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 55
55
03-12-13 13:59
WLT Liquid & Gas Loading Technology bv Timmerfabriekstraat 19 2861 GW Bergambacht PO box 24 2820 AA Stolwijk The Netherlands T +31 (0)182 35 44 40 F +31 (0)182 35 44 80 E info@wlt.nl W www. wlt.nl
Introduction WLT Liquid & Gas Loading Technology B.V. is a leading manufacturer of equipment for the transfer of (hazardous) liquids and gasses to and from ship, tanker, rail car and other storage means. Full service
Sales department
WLT is a comprehensive service company. The products/services cover advice,
T +31 (0)182 35 44 40
development, design and manufacture to installation, maintenance and overhaul F +31 (0)182 35 44 80 of loading arms (land and marine), hose towers, fall protection and loading plat-
M +31 (0)6 12 31 25 34
forms, tank equipment etc.
E aduiverman@wlt.nl W www.wlt.nl
Worldwide WLT operates on a global scale. The WLT products find their way to renowned producers of (petro) chemical liquids and gasses, at home and abroad. WLT’s head office and manufacturing unit are located in Bergambacht, near Rotterdam. For more information about our company and products, we invite you to visit our web-site www.wlt.nl.
Th. Wortelboer bv Sluisweg 9 6582 AG Heumen PO box 5 6580 AA Malden The Netherlands T +31 (0)24 358 65 14 F +31 (0)24 358 70 79 E info@wortelboer.ws W www.wortelboer.ws
Th. Wortelboer bv is a Dutch manufacturer of stationary pipe end preparation machines for mainly the oil and gas industry. These heavy duty bevel machines are also used in offshore platform construction, pipe manufacturing, pipeline constructions and so on. Investing in a PBM machine is investing in quality. A well prepared bevel decreases the change on failures during welding, and increases the quality of the welding process.
For cleaning pipe ends after bevelling, Th. Wortelboer BV introduced a hand held TPP polishing machine which enables the user to clean both inside and outside of
W
The complete PBM series, starting with the PBM-4, now has a range capacity of
the pipe end at the same time.
1/2” till 30” pipe (clamping range upto 780 mm. o.d.). The PBM-30 is cap[able to
More information can be found on www.wortelboer.ws
prepare a pipe with 25 mm. wall thickness in one machining operation. Heavier can be done with the CNC models from 2” till 30” pipe. Alternative, heavier wall thickness can also be machined in multiple passes. Besides end preparation Th. Wortelboer BV is developing a stationary cutting- and bevelling machine for thick walled pipes. This new ABM machine is able to cut and bevel at the same time. Tough material and thick pipe walls are machined in seconds.
56 FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 56
03-12-13 13:59
Zitron Droogdokstraat 6 7553 GW Hengelo PO box 179 7550 AD Hengelo The Netherlands T +31 (0)74 240 82 73 F +31 (0)74 240 82 66 E alidus.wessels@zitron.nl W www.zitron.nl
Zitron Nederland B.V. offers their customers comprehensive ventilation packages, meeting the current and future needs of the Energy and boiler market. Our capabilities include: • Design and sizing of fans and ventilation components. • System pressure drop- and noise calculations including on site meaurements. • Detailed engineering of fans, fan foundations and components.
To ensure total compliance with customers specifications we have a policy of
• Manufacturing of fans and sub-contracting of components.
dealing with only approved suppliers for dampers, attenuators, electric motors
• Project management.
and auxiliary equipment, as these are, beyond the fans, key elements in the
• Transport to the site.
ventilation system.
• Installation, commissioning and testing. • Maintenance.
Further Zitron supplies a wide range of parts and carry out services also for other
• Trouble shooting.
brands.
• Quality management.
The types of the fans are:
• Workshop balancing as well as balancing on site.
• Variable Pitch Fans.
• Aftermarket.
• Mixed Flow Fans.
• Reverse Engineering.
• Manual Adjustable Fans.
• Refurbisment. • Modernisation.
Brush HMA bv Ringdijk 390B 2983 GS Ridderkerk PO box 3007 2980 DA Ridderkerk T +31 (0)180 44 55 00 F +31 (0)180 44 54 45 W www.brush.eu
Brush has been at the forefront of the power generation industry for over 130 years providing world class products, and is the largest independent manufacturer of turbo generators in the world, combining the resources of three major manufacturers of generators for gas turbine, steam turbine and hydro-turbine drive. Brush has customers across all continents. Brush Aftermarket division has a lot of knowledge and experience build up in maintenance and revision of electrical machines. Expertise on not just Brush machines but all marks on the field of generators and motors, for example explosion-proof motors, submersible motors, 2-pole and 4 pole generators.
Z FME ENERGy GuIDE 2014-2015
013-57_profielen.indd 57
57
03-12-13 13:59
Created and produced by
Announcing Offshore Energy 2014 28 & 29 October | Amsterdam RAI | the Netherlands
book stand your now!
Call or em +31 (0)10 2 ail sale 09 s@nav 2600 ingo.c om
Your platform for the future
28 & 29 OCTOBER 2014
Media partners
www.offshore-energy.biz
OE13_Adv_FMEenergyGuide_185x268mm_fc_27sept2013.indd 1
077_navingo.indd 1
Supported by
In association with
27-11-13 09:56
28-11-13 11:55
Utilities & Power supplies
Miscellaneous
x
x
x
Cleantech
Transport & Logistic systems
Shipbuilding, Offshore Vessels
Rotary equipment
Process Control
Metal structures & supports
Mechanical automation
Maintenance
Engineering & Consultancy
x
Health, Safety, Environment equipment
Construction & Modification
x
Fluid control
Boilers, Heaters & Heat exchangers
Specialisations
Description on page
x
A A. Hak Beheer
13
A. de Jong Groep
13
Aarding Thermal Acoustics bv
14
AEG Power Solutions bv
14
AIB Vinรงotte Nederland bv
15
Alenso
9
Altrex
15
Anamet Europe
16
Atlas Copco Compressors Nederland
16
x
x
x
x x
x
x
x x x
x
x
x
x
x
x
x
x
x
x
x x
x
x
B Bayards Aluminium Constructies bv
17
x
BBE Biogas
9
x
Bluestream Offshore
10
x
Boessenkool bv
17
Bosal Emission Control Systems
10
Breman Machinery
18
Bronswerk Heat Transfer bv
18
Brooks Instrument
19
Brush HMA
57
x
x
x
x
x
x
x
x
x
x
x
x
x
x x
x x
x
x
x
x x
x
x
x
x
x x
C Cofely Nederland nv
19
x
x
x
x
x
x
x
x
x
x
x
x
x
x
D D&C engineering
20
Damen Shipyards
21
Dhatec Line pipe Logistic Solutions bv
20
Discom bv
22
Doedijns International bv
22
Dorset Group bv
23
Dorset Group bv
11
Duiker Mechanical bv
23
x
x
x
x x
x
x
x x
x x x
x
x
x
x
x
x x x
x
x
x
FME ENERGY GUIDE 2014-2015
059_61_63_65_I_matrix.indd 59
59
03-12-13 16:26
Your supplier for all access equipement in the Energy Industry
www.altrex.com
Tss4U Solar Power Systems for: • • • •
Cathodic Protection Instrumentation Security Lighting ...
Both safe and hazardous area. www.tss4u.nl ISO 9001-2008
060_altrex_Tss4U.indd 1
28-11-13 11:54
Miscellaneous
x
Cleantech
Utilities & Power supplies
Transport & Logistic systems
Shipbuilding, Offshore Vessels
Rotary equipment
Process Control
Metal structures & supports
Mechanical automation
Maintenance
Health, Safety, Environment equipment
Fluid control
Engineering & Consultancy
Construction & Modification
Boilers, Heaters & Heat exchangers
Specialisations
Description on page
x
E Eaton Industries (Netherlands) bv
24
ECN
11
ELEQ
24
Escher Process Modules bv
25
x
x
x
x x x
x
F FIB Industries bv
25
Flexicontrol
12
x
x
x
x x
G Geha Machinefabriek bv
26
x
x
GGNI
26
x
Glynwed bv
27
x
Gouda Holland
27
GustoMSC
28
x
x
x
x
x
x
x
x
x x
x
x
x
x
x
x
x
H Hatenboer-Water bvÂ
28
x
x
HeatMatrix Group bv
12
Heerema Fabrication Group bv
29
Hitec Power Protection bv
29
Howden Netherlands bv
30
Howden Thomassen Compressors
30
x
Huisman Equipment
31
x
Iemants
31
x
IHC Hydrohammer bv
32
IHC Merwede Offshore & Marine
32
x
x x
x x
x
x
x
x
x x x
x x
x
I x x x
x
x
x
x
J Jenbacher bv
33
x
K Keppel Verolme bv
33
Kersten Europe
13
x
x
x x
FME ENERGY GUIDE 2014-2015
059_61_63_65_I_matrix.indd 61
61
03-12-13 16:26
See the Damen Fast Crew Supplier 2610 in action. Scan this ad with your Layar-app.
HIGH SPEED SUPPORT VESSEL THE NEW INDUSTRY STANDARD
The Damen Twin Axe offers your and your clients’ crew a swift and safe trip offshore. It combines comfort with superb handling characteristics in all weather conditions.
19 VESSELS DELIVERED IN 2 YEARS 20 VESSELS UNDER CONSTRUCTION
WWW.DAMEN.COM | PRo@DAMEN.COM | +31 183 65 51 77
adv_2610.indd 1 1 062_damen.indd
15-08-13 11:54 13:42 28-11-13
13
Klip Bv Pijpleidingen- Montage
34
x
Kooiman Apparatenbouw bv
34
x
Krohne Nederland
35
Kuehne + Nagel
35
Cleantech
Miscellaneous
Utilities & Power supplies
Transport & Logistic systems
Shipbuilding, Offshore Vessels
Rotary equipment
Process Control
Metal structures & supports
Mechanical automation
Maintenance
Health, Safety, Environment equipment
Fluid control
Engineering & Consultancy
Construction & Modification
Boilers, Heaters & Heat exchangers
Specialisations
Description on page
KIC InnoEnergy Belenux
x x
x
x
x
x
x
x
x
x x
x
x
L LBP Sight bv
36
Locamation
14
Lovink Enertech
36
x
x
x
x x x
M M&I-Labtech bv
37
Mechanische Industrie Menzing
37
Merford Noise Control
38
MFE Machining & Construction bv
38
x
x
x x
x
x
x
x
x
x x
x
x x
x x
x
x x
x
x x
N NEM bv
39
x
New Cosmos - BIE bv
39
x
Nijhuis Water
14
NMI Certin
40
NXP Semiconductors nv
15
x
x
x
x
x
x
x x x
x
x
x
x
x
x
x x
P Petrogas Gas Systems bv
40
x
x
x
x
x
x
x
Plugwise
15
Power Piping International bv
41
x
RebelGroup Advisory bv
41
x
x
De Regt Marine Cables bv
44
x
x
Royal Haskoning Nederland
44
x
x
x x
R
S Sarens Nederland
45
Saval bv
45
x x
x
x
x
x
FME ENERGY GUIDE 2014-2015
059_61_63_65_I_matrix.indd 63
63
03-12-13 16:26
Meet the power of cooperation Architectural constructions Bridges High-grade industrial constructions Oil & Gas on-and offshore constructions Offshore Wind constructions Renovation projects
Iemants NV
Industrieterrein Hoge Mauw 200 2370 Arendonk
Tel: +32 14 67 22 81 Fax: +32 14 67 20 92
iemco@iemco.be www.iemants.com
8
ACTIVE IN THE
POWER AND PETRO-CHEMICAL MARKET FOR NEW AND RETROFIT PROJECTS
1 2 3 4 5 6 7 8 9 10 11 12
Exhaust Diffuser / Exhaust Plenum Exhaust Duct Exhaust Bypass System Silencer Exhaust / HRSG Inlet Duct HRSG Internal Insulation Vent Silencer Stack Expansion Joint Diverter Damper Stack Damper Guillotine Damper
7
11 4
8
4
12
3 2
Lloyd’s certified
ISO-9001:2008
1 4
10
9
5
6
Headquarters
www.aarding.com a Ceco Environmental company
064_Imants_Aarding.indd 1
Industrieweg 59 / P.O. Box 65 / 8070 AB Nunspeet / The Netherlands T +31 341 252635 / F +31 341 262112 / E info@aarding.com / www.aarding.com Offices The Netherlands - Canada - USA - Brazil - Singapore
28-11-13 11:55
SGS Nederland
47
Sinus Jevi Electric Heating bv
47
Smit Ovens
16
Smit Transformatoren bv
48
Stork Technical Services Holding
48
Strukton Systems, PMC Energy Solutions bv Sulzer Turbo Services Rotterdam bv
x
Cleantech
Miscellaneous
Utilities & Power supplies
Transport & Logistic systems
Shipbuilding, Offshore Vessels
Rotary equipment
Process Control
Metal structures & supports
Mechanical automation
x
Maintenance
x
Health, Safety, Environment equipment
x
Fluid control
Engineering & Consultancy
46
Construction & Modification
Seaway Heavy Lifting
Boilers, Heaters & Heat exchangers
46
Specialisations
Description on page
Schelde Exotech bv
x x
x
x
x
x
x x x x
x
x
x
x
49
x
x
x
x
49
x
x
x
x
x
x
x
x
x
x
x
x
T TCE GoFour bv
16
Tss4U bv
50
Typhoon Offshore
17
x x
x
x x
V Van Beest bv
50
x
Van Dam bv
51
x
Van Heck
51
Van Oord Offshore Wind Projects bv
52
Van Vliet Trucks Holland bv
52
Varco BJ bv
53
Vecom Group
53
Verebus Engineering bv
54
VMB Besturingstechniek bv
54
x
voestalpine Bรถhler Welding Nederland bv
55
x
x
x
x
x x
x
x
x
x
x
x
x x x
x
x x
x
x
x
x
x
x x
x
x
x
x
x
x
x
x
x x
x
x
x
x
x
x
x
W Willteco bv
55
WLT Liquid & Gas Loading Technology bv
56
Th. Wortelboer bv
56
x x x
x
x
x
x
x
x
x
x
x
x
x x
x
x
Z Zitron
57
ZON Energie Groep
17
x
x
x
x
x
x x
FME ENERGY GUIDE 2014-2015
059_61_63_65_I_matrix.indd 65
65
03-12-13 16:26
Petrogas where nature and technology meet Earth, the origin of gas. Fire, the point where it releases its energy. Water, the source of life. And air, the boundary of our familiar world. Four elements, all partners in nature.
Who we are... Petrogas is a Dutch engineering company that is specialised in the development of ‘tailor made’ gas treatment systems. We deliver skid-mounted units, which are easy to transport and install. Clients are national and international gas companies, engineering firms, gas turbine and gas motor suppliers. More about Petrogas? Please visit www.petrogas.nl
Harderwijkweg 2, 2803 PW Gouda, P.O.box 20, 2800 AA Gouda, The Netherlands Phone: +31 182 565 395, Fax: +31 182 565 325, E-mail: info@petrogas.nl, Internet: www.petrogas.nl
16631 Petrogas Adv.1210x297.indd 1 066_petrogas.indd
13-11-13 11:53 12:24 28-11-13
ADVERT INDEX A. de Jong Groep .....................................................................................................................................................................................2 Aarding Thermal Acoustics ....................................................................................................................................................................64 AEG Power Solutions ...............................................................................................................................................................................8 AIB Vincotte Nederland ..........................................................................................................................................................................10 Altrex ......................................................................................................................................................................................................60 Atlas Copco Nederland ............................................................................................................................................................................8 Damen Shipyards ..............................................................................................................................................................................12, 62 Geha Machinefabriek ...............................................................................................................................................................................4 Iemants ....................................................................................................................................................................................................64 Navingo ..................................................................................................................................................................................................58 Petrogas .................................................................................................................................................................................................66 Power Piping International .......................................................................................................................................................................2 Seaway Heavy Lifting ................................................................................................................................................................................6 Stork ..................................................................................................................................................................................................42, 43 Tss4U .....................................................................................................................................................................................................60
Colophon Association FME–CWM Boerhaavelaan 40 2713 HX Zoetermeer PO box 190 2700 AD Zoetermeer T +31 (0)79 353 13 90 F +31 (0)79 353 13 65 E internationaal@fme.nl W www.fme.nl
Uitgave van / published by: Industrielinqs pers en platform PO box 12936 1100 AX Amsterdam E info@industrielinqs.nl W www.industrielinqs.nl
Editors: Mark Oosterveer, Breg Schoen Design:Gabriele Köbbemann Sales: www.jetvertising.nl Contact: FME: Nicole de Borst Print: DeltaHage in Den Haag The FME Energy Guide has a broad global reach with over 1000 editions in print and an active electronic distribution via Dutch Economic Trade Missions and via www.fme.nl
FME ENERGY GUIDE 2014-2015
067_colofon_index.indd 67
67
03-12-13 15:28
001_2_83_84_omslag.indd 1
03-12-13 13:21
Oil • Gas • Petrochemical • Power • Cleantech
FME Energy guide 2014 - 2015
TION I D E H C E T CLEAN
2014 - 2015
FME Energy guide Oil • Gas • Petrochemical • Power • Cleantech achtergrond_groen.indd 1
18-11-13 10:02
001_2_83_84_omslag.indd 2
03-12-13 13:22
Power Piping International BV is a manufacturer and supplier of a complete range of pipe supporting for all types of piping systems.The manufacturing facility is strategically located in Moergestel, The Netherlands directly on the A58 highway between the ports of Rotterdam and Antwerp. We are specialised in the manufacture and supply of insulated pipe supports for low temperature piping systems and insulated pipesupports for high temperature piping systems. Our Quality Management System has been audited and meets the ISO9001:2000 standards. • • • •
POWERFOAM™ HD PUF cryogenic pipe supports POWERFOAM™ HD PUF cryogenic anchors Timtherm® hot pipe supports Permali pipe supports
A modern manufacturing facility, a knowledgeable engineering department, years of experience and an innovative team support our activities. Short communication lines guarantee a quick and responsive supplier. Power Piping International BV, P.O. Box 464, 5000 AL Tilburg, The Netherlands Ind. Estate De Sonman, De Sonman 15, 5066 GJ Moergestel, The Netherlands Telephone: +31 13 595 29 23, Fax: +31 13 595 29 24, E-mail: info@powerpiping.nl
Engineering, manufacturing and commissioning of industrial burner systems. .
www.powerpiping.nl
Engineering, manufacturing and commissioning of industrial burner systems. p75_powerpiping.indd p71_powerpiping.indd 1 1
02-04-12 11:21 09-03-2011 10:20:39
Cleantech Holland Your Portal to Dutch Cleantech Solutions The Dutch technological industry has an outstanding reputation worldwide when it comes to energy efficiency and renewable energy. Export organization Cleantech Holland can help establish contacts with Dutch clean technology companies, experts and solutions. CLEANTECH SOLUTIONS The development of sustainable energy technology is a top priority in the Netherlands. Active partnerships between Dutch industry, government and knowledge institutes have cleared the way for energy innovation. In addition, the Dutch are investing heavily in energy efficiency. The following applied solutions are to be found in the Netherlands; • (Offshore) Wind Energy Cogeneration • Solar Energy Waste to Energy • Smart Grids Energy Efficiency • Bio Energy Blue Energy • Tidal Energy Smart Cities Please visit our website to see the latest developments, newest solutions and most recent applications. www.cleantechholland.com
EXAMPLES OF DUTCH SOLUTIONS FOR GLOBAL CHALLENGES Offshore Wind Energy The Dutch are particularly experienced in offshore wind energy solutions. One example for instance is the Prinses Amalia Windpark located in block Q7 of the Dutch Continental Shelf. This block is located 23 kilometers from the shore where the water is 19 to 24 metres deep. This makes the Prinses Amalia Wind Farm the first offshore wind farm to be constructed in such deep waters and at such a distance from the shore (beyond the 12-mile limit). Operational since 2008 it has annual power production of 435 Gwh, enough to power 125.000 households. Solar Energy Another example of a high-quality technology solution from the Netherlands is the “City of the Sun “in the Dutch town of Heerhugowaard. This neighbourhood is “carbon neutral“, producing enough energy to offset what it uses. The City of the Sun is one of the largest photovoltaic (PV) projects in the housing sector worldwide. This project also includes wind turbines and every home has been built according to high standards of energy efficiency. What does Cleantech Holland do? Organize & support: Dutch pavilions, in-and outgoing trade missions, seminars, conferences, workshops, matchmaking, support international promotion of Dutch Cleantech Solutions.
PO box 190, 2700 AD Zoetermeer T +31 (0)79 353 13 90 F +31 (0)79 353 13 65 E info@cleantechholland.com W www.cleantechholland.com Offshore Wind Energy • Solar Energy • Smart Grids • Bio Energy • Tidal Energy Cogeneration • Smart Cities • Waste to Energy • Blue Energy • Energy Efficiency
Bio Energy Wind Offshore
Smart Grids
Solar
Energy savings Industry
FME ENERGY GUIDE 2014-2015
082_L-CTH.indd 3
3
03-12-13 16:27
ECN: Efficiency as a product The Energy research Centre of the Netherlands (ECN) is the largest research institute in the Netherlands in the field of energy. Approximately 500 employees are actively involved in projects concerning wind and solar energy, bio energy, energy efficiency, corrosion and material analysis, policy advice and environmental research. These projects take place both domestically and internationally, in collaboration with the industry, authorities and research institutes. ECN’s research has a major influence on daily life. Energy saving and energy efficiency are significant pillars of ECN’s activities. The institute is internationally known for its knowledge of heat regulation in processes, and how to improve these processes and develop new solutions. Peter Alderliesten, Program Development Manager Energy Efficiency at ECN, sees ample opportunities for innovative technology. ‘Energy and sustainability are often discussed in the context of supply. We focus on identifying opportunities for improvements on the user’s side’, explains Alderliesten. Approximately 80% of all energy use in the industry consists of heat, which is often still generated by classic processes using oil or gas-fired furnaces. The efficiency of these processes varies, and a relevant question is whether they are still the right processes to use. And what else can you do with the heat that currently still escapes via the chimney or cooling water? Alderliesten and his team are involved in numerous analyses of energy and heat flows in divergent industrial processes, while also looking for room to innovate within these processes. ,Among other things, ECN has vast knowledge of, and experience in the field of heat pumps. These pumps can be used to upgrade released heat of, for instance, 60 to 120 degrees Celsius to a higher temperature for heating, or to lower temperatures for cooling. This heat can subsequently be reused in the process, thus improving efficiency. The technical challenges faced by ECN are mainly found in the great difference between the temperature of waste heat and the relatively high working temperatures needed. 4
Unfortunately, this energy efficient technology is not yet widely available. A new 200kW heat pump was recently installed at paper manufacturer Smurfit Kappa. The collaboration between the contractor, Bronswerk, IBK and ECN led to a 10% saving in energy use. What is innovative about this heat pump is that much higher temperatures can be reached with this concept. The heat pump can upgrade the waste heat temperature within this system from 60 to 140 degrees Celsius via a natural refrigerant, producing steam. This is much higher compared to the performances of common heat pump systems. Another novelty of this heat pump is the way in which the system is integrated into the paper factory. Today, heat pump systems are still frequently added to existing installations. Heat pumps that are actally integrated in the process are the next step towards a far-reaching improvement of energy efficiency. These heat pumps are tailored to the specific process, unlocking a considerably higher efficiency potential. One of the most important future technologies is the thermoacoustic heat pump. Within two years, Bronswerk and ECN expect to have set up an operational pilot that demonstrates a substantial efficiency improvement in processes, using an electrically driven heat pump. The available knowledge and experience are used for farreaching optimisation of heat management in the industry worldwide. ECN has identified six core activities with opportunities for the industry, business sector, government authorities and knowledge institutes: ► Solar energy. Together with manufacturers of solar modules, production equipment and materials, ECN ensures that the latest scientific insights are applied in usable concepts for solar cells, modules and processes. ► Wind energy. ECN participates in improving designs of wind farms, turbines and turbine parts as well as more efficient maintenance. These efforts focus on substantially lowering the costs of offshore wind energy. ► Biomass. The institute’s efforts are targeted at the biobased economy, with a focus on thermochemical conversion of biomass. Working areas include pretreatment, gasification, purification and biorefining.
FME ENERGY GUIDE 2014-2015
078-81_G_ECN.indd 4
03-12-13 13:18
► Energy efficiency. ECN’s know-how and network of expertise is used to make industrial processes more efficient, for example by means of heat pumps, separation technology and revolutionary chemical reactors. ► Environment & Energy Engineering. ECN develops and designs experimental installations, prototypes and high tech components, and supports innovative businesses and institutes with ground-breaking technology. The environmental research focuses on measurements and analyses of air quality and reusing contaminated waste. ► Policy studies. Engineers, economists, social scientists and environmental experts collaborate with the technical departments to develop strategic advice. Supply and demand of energy In the world of energy, transport and distribution is also an ever-changing field of work. The growth of decentralised generation via conventional and new technology impacts the use of the electricity network. As a consultant for ECN, Marco Bakker works on both domestic and international studies of electricity networks within the framework of energy policy. ‘The demand for electricity is increasing, and in Europe we see a shift from gas to electricity. Energy supply is becoming progressively
decentralised, due to the strong growth in solar and wind energy. Contrary to the supply of a conventional power plant, this supply cannot be controlled. What should we do to accommodate the generation of solar and wind energy? These questions must be solved.’ The changes in supply and demand lead to an increasing need for flexibility from the network, the market and from providers. The need for a network’s peak capacity is increasingly determined by supply rather than by demand. Energy prices will be more volatile, whilst conventional plants will be used more frequently to fill the gap caused by the intermittent solar and wind energy supply. However, these conventional plants have been built to supply a constant, fixed output. The business case for conventional energy plants is therefore crumbling. This change also creates challenges for the electricity network. Most European countries have legal requirements stating that network administrators shall organise energy transports upon request. This means that if a farmer has a substantial number of solar modules on his barn, the capacity of his connection must be enlarged. At present, this additional investment is often not considered in the final decision, because the network administrator is not involved at this stage. The FME ENERGY GUIDE 2014-2015
078-81_G_ECN.indd 5
5
03-12-13 13:18
offshore insTallaTion ... our core business
seaWay Heavy lifting is a leading offsHore ContraCtor in tHe oil & gas and reneWables industry
c/o Albert Einsteinlaan 50 w w w. s h l . c o m . c y
WindandWaves11.indd 081_seaway.indd 1 2
| 2719 ER Zoetermeer
| The Netherlands
| Phone: +31 79 363 77 00
A S U B S E A 7 J O I N T V E N T U R E C O M PA N Y
15-8-2013 17:51:02 28-11-13 11:55
costs of this suboptimal choice are, however, ultimately borne by civilians. The policy makers that work on these issues see plenty of options, but they have difficulty making the right decision. ‘At ECN, we help government authorities and enterprises to shape the policy and make strategic decisions’, Bakker adds. ‘We make specific analyses of the market forces and we search for viable new business models, with specific focus on the roles of the market operators.’ Bakker quotes a recent study in which the growth of decentralised generation and the effects on the electricity network in the province of North Holland have been researched. In 2020, the supply from decentralised generation is likely to be much higher than the current network capacity. A rigorous capacity expansion is expensive. Remote control of the production of cogeneration installations of growers could provide a solution. The income that these growers lose due to lower electricity production could easily be compensated by the network administrator. As this missed income is more than four times lower than the avoided network investment amount, the net savings are still very large. This is a smart grid on a regional scale. Another aspect of the transition to a flexible energy system is being tested in a pilot project on the Danish island
of Bornholm. ECN is closely involved in this project, in which two thousand households and a wide array of sustainable solar and wind generation are connected by a smart grid. This project focuses on controlling consumers’ energy demand: ranging from active, direct remote control to offering energy saving suggestions. The objective of the project is to find out what drives consumers in saving energy. Some people have financial reasons, while others want to contribute to a better world, and a third driver is to decrease the dependency on fossil fuels. Bakker concludes: ‘The field experiment clearly demonstrates that there are different reasons for users to change their energy consumption behaviour. These groups all require a different approach.’ ECN’s knowledge is used to develop energy efficient technologies that are practically applicable to both existing and new processes, ranging from recycling and upgrading process heat to the emergence of smart grids in energy nets. ECN also helps countries where sustainability has not yet taken centre stage. ECN helps to establish sustainable energy policy in areas where energy generation is unable to meet demand and where the need for energy will strongly increase in the years to come. See also page 11 in Cleantech part for contactdetails. FME ENERGY GUIDE 2014-2015
078-81_G_ECN.indd 7
7
03-12-13 13:18
Energy-efficient solutions of Atlas Copco
Sustainable productivity and reduction of operating costs
Atlas Copco is an industrial group with a world-leading position in compressors, expanders and air treatment systems and is known for its quality, reliability and innovation. We are committed to optimise our customers’ productivity and reduce their operating costs. With our energy-efficient solutions we make a contribution to a sustainable future. If you are interested to know about our products and how we can help you to lower your energy consumption and carbon footprint, feel free to contact us for custom advice matching your situation. Temporary requirements? Our Rental division offers rental solutions for your temporary needs. Visit www.atlascopcorental.nl and look for the various possibilities or contact us at our free telephone number + 31 (0)0800 1768 1768. Atlas Copco Compressors Nederland P.O. box 200, 3330 AE Zwijndrecht (the Netherlands) Tel +31 (0)78 6230 230 Fax +31 (0)78 6100 670 www.atlascopco.nl
079_atlas.indd 1
28-11-13 11:55
13 10:02
Alenso, Energymanagement
A
Beekstraat 21 6443 VB Brunssum The Netherlands T +31 (0)857 85 14 48 F +31 (0)847 52 87 34 E info@alenso.eu W www.alenso.eu @Alenso_energie
B
Alenso is a Energy Consultancy company who provides specialized services and solutions to industrial organizations, companies and government. The company is specialized in energy saving/CO2 reduction for production lines and buildings. Products: - Energy audit - Energy management ISO 50001 - Energy monitoring - Advising on energy saving projects - CO2 footprint - Energy contract management SAVING ENERGY=REDUCTION CO2
BBE Biogas bv De Bosch Kemperlaan 7 3818 HC Amersfoort The Netherlands T +31 (0)338 88 74 18 E info@bbebeheer.nl W www.bbebiogas.nl
**- *QWOI[ *>
Background BBE Biogas is a very experienced Dutch company active in the wet anaerobic digestion (AD) industry. With over 10 years of experience in developing, constructing, financing and operating AD plants, BBE Biogas can be considered one of the market leaders in the Netherlands. Being an international active company with projects under development in among other South Africa, Japan and China, BBE Biogas is carrying out its green mission world wide. BBE Biogas specializes in the anaerobic digestion of many kinds of organic waste, ranging from food- and agricultural waste to different kinds of manure and solid municipal waste.
Method The skilled and flexible team of BBE Biogas realizes projects together with the
Scope
customer. We deliver turn-key projects on a transparent basis, whereby using as
The involvement of BBE Biogas is not limited to design and construction of AD
much local equipment as possible. All (cost) calculations are available for the cus-
plants. Our background in operations of AD plants allows us to educate future
tomer for maximal transparency.
operators on the job, before commissioning and start-up. If desired, BBE Biogas can also advise existing AD plants on operations and efficiency improvements.
Information More information? Please visit our website and do not hesitate to contact us via e-mail or telephone.
FME ENERGY GUIDE 2014-2015
achtergrond_groen.indd 1 068-76_profielen_cleantech.indd 9
9
18-11-13 14:01 10:02 03-12-13
Bluestream Offshore bv
B
Koperslagersweg 2 1786 RA Den Helder The Netherlands T +31 (0)223 63 77 84 F +31 (0)223 66 86 38 E info@bluestreamoffshore.com W www.bluestreamoffshore.com
Bluestream is a service providing offshore company in the Oil & Gas and Renewable Energy sector, providing a wide range of topside and subsea services. We distinguish ourself by innovation and tailor-made technical solutions combined with a high level of service. Key factors are smart engineering, early involvement and personal commitment. Bluestream Offshore is specialized in: ROV, Diving and Rope Access Services. Including: Inspection, Repair & Maintenance, Non Destructive Testing, Drill
Diving
Support, Construction & Installation, UXO clearance, Decommissioning, Marine
Bluestream provides integrated engineering solutions and diving. We maintain a
Salvage and Remote Tooling.
motivated, creative and experienced team and a versatile range of compliant and fully certified diving equipment which can be configured to provide diving solu-
Remotely Operated Vehicles (ROV)
tions for any worksite.
We provide cost efficient subsea solutions. Combining compact electric observation and Light Work Class ROVs with full size Work Class ROV tooling is a success-
Rope Access Services
ful approach in shallow water projects. The advantages are the minimum deck
Our qualified personnel performs specific tasks at height or difficult accessible
space requirements, fast mobilization time and system set-up, smaller teams
locations using rope access techniques in combination with full project manage-
required and the economically favorable conditions.
ment. We are member of the IRATA.
Bosal Nederland bv Kamerlingh Onnesweg 5 PO box 212 4130 EE Vianen The Netherlands T +31 (0)34736 29 11 E stef.wezenbeek@eur.bosal.com W www.bosal.com
BOSAL GROUP BOSAL’s core business for the future is to develop and deliver globally fully integrated emission control and energy conversion solutions. BOSAL is a result driven organization, with a desire to provide customer satisfaction through superior quality and premium value to our customers. ENERGY CONVERSION INDUSTRY (ECI) The Business Unit ECI has been active for more than 15 years in the field of high performance welded stainless steel heat exchangers. These products are designed to function in very hot (up to 1000°C), pressurized and corrosive environments to improve the efficiency of top level micro turbines, fuel cell stacks, stirling engines and waste heat recovery systems in general. The customized gas/ gas and gas/liquid heat exchangers are conceived in a modular way for small and large systems to support heat and power generation. Our engineers take care of the complete product creation path, from prototyping to mass production. At the moment we are building up a new semi automated production line for heat exchangers in the BOSAL factory in Vianen, Netherlands.
10 FME ENERGy GUIDE 2014-2015
068-76_profielen_cleantech.indd 10 achtergrond_groen.indd 1
04-12-13 10:02 11:38 18-11-13
achterg
13 10:02
Dorset Green Machines bv Weverij 26 7122 MS Aalten The Netherlands T +31 (0)543 47 21 03 F +31 (0)543 47 53 55 E gm@dorset.nu W www.dorset.nu
D E
Drying Equipment Dorset Green Machines is a leading global designer, manufacturer and marketer of biomass drying systems. We focus on commercially attractive solutions for treatment of biomass waste products, using available residual heat. The most common biomass products for drying are: - poultry manure, - digestate, - sewage sludge,
Pyrolysis plants
- woodchips.
Our most recent development is the pyrolysis plant, which turns dried (pelletized) manure into 50% oil & gas and 50% ashes. The oil and gas provide fuel for creat-
Drying significantly reduces storage and transport costs. The dried product can be ing green energy through combustion. The ashes can be used or sold as a concensold as valuable organic fertilizer or as fuel for green energy or can be processed
trated organic fertiliser.
further. Dorset was founded at Aalten in 1984. It’s main production facilities and engiPelletizing plants
neering department are still located in The Netherlands. The sales and service
Dorset manufactures complete pelletizing plants in plug-and-play container
departments are spread through various locations across Europe in order to be
solutions. Pelletizing makes the dried product more marketable and significantly
close to the customer.
decreases the volume, which results in new export possibilities and further lower transport and storage costs.
ECN Westerduinweg 3 1755 LE Petten PO box 1 1755 ZG Petten The Netherlands T +31 (0)88 515 49 49 E info@ecn.nl W www.ecn.nl
With and for the market, ECN develops knowledge and technology that enable a transition to a sustainable energy system. Countries and their economies develop and grow. To meet the future energy needs, the global energy system needs to become more sustainable. ECN’s groundbreaking renewable energy technologies and knowledge offer businesses and governments economic opportunities and innovative distinctiveness. ECN plays a leading role in energy R&D and policy advice and has gained a strong reputation worldwide in the fields of solar and wind energy, bio-energy, energy efficiency, materials and corrosion, environmental research and policy studies. Our track record of success is illustrated by the fact that over 60% of all solar modules in the world contain ECN technology and 80% of Europe’s offshore wind farms is realised with R&D and support from ECN. Employing around 500 professionals and having multiple branches in Europe and Asia, ECN works on sustainability every day.
FME ENERGY GUIDE 2014-2015
achtergrond_groen.indd 1 068-76_profielen_cleantech.indd 11
11
18-11-13 14:01 10:02 03-12-13
Flexicontrol Newtonstraat 27 1704 SB Heerhugowaard The Netherlands T +31 (0)72 576 25 50 E Rene.Balvers@Flexicontrol.nl W www.Flexicontrol.nl @Flexicontrol
We are developers of ready-to-use electronics. These products are character-
F
ized by their integrated approach to the various disciplines within the building. This means that separate systems such as air-conditioning, lighting and access provision, are easily integrated into one system using the Flexicontrol solutions with all its additional advantages. For the end user our products focus on saving energy, making homes more comfortable and safe to live and work in.
H
Wendy, our home automation computer, is the center of any modern household. She connects your house to the smart grid. This enables Wendy to make the
Our ambition for the coming years is to continuously invest in product innova-
utmost use of ‘smart appliances’. For example: Wendy postpones the start of the
tion. Next to that we aim to grow our marketshare in the Netherlands for home
washing machine until there is solar energy in abundance. But most of all, Wendy automation solutions. We also are investigating the need for Flexicontrol prodmakes sure you are comfortable in your home while taking care of your lighting
ucts in Europe.
and safety 24/7. Wendy can be accessed over the web, through smartphone, tablet and an attractive in-house display. Wendy gained national recognition in March of 2013 by winning the Dutch Smart Grid Innovation Award.
HeatMatrix Group Directiekade 15 3089 JA Rotterdam The Netherlands T +31(0)10 848 53 17 E info@heatmatrixgroup.com W www.heatmatrixgroup.com
HeatMatrix Group – Turn Waste Heat Into Profit The Dutch company HeatMatrix (www.heatmatrixgroup.com) has developed a new generation air-preheater that enables heat recovery from corrosive and/ or fouling gas streams originating from industrial boilers (fired by natural gas, biomass, oil or coal), (refinery) furnaces, ovens, biomass heaters, biogas CHP units, industrial dryers, spray-dryers, etc. This innovative heat exchanger consists of lightweight, corrosion resistant, plastic modules, which can be applied at high temperatures and is ideally suited for flue gasses that are corrosive and/or have fouling in it. The core of the HeatMatrix heat exchanger is a rigid matrix of connected, thin wall plastic tubes. The full length of the tubes contains supporting ribs providing strength to the construction. The plastic HeatMatrix exchangers are corrosion and/or fouling resistant, light-
Using the HeatMatrix heat exchangers allow companies to save on energy costs
weight, compact, cost effective and have a high efficiency. They improve energy
and to fulfill their sustainability targets.
efficiency and reduce CO2 emission by 5 - 20 % within a very short payback period.
For more information and/or an overview of references don’t hesitate to contact HeatMatrix.l
12 FME ENERGY GUIDE 2014-2015
068-76_profielen_cleantech.indd 12 achtergrond_groen.indd 1
03-12-13 10:02 14:01 18-11-13
achterg
13 10:02
Kersten Europe Piet van Elsstraat 7 5861 AW Wanssum The Netherlands T +31 (0)478 53 71 11 F +31 (0)478 53 71 10 E nl@kersteneurope.com W www.kersteneurope.com @KerstenEurope
Kersten Europe has been a specialist in bending technology for decades. The Business Unit Renewable Energy is fully dedicated to Offshore Wind. Core business is bending profiles and plates in steel, stainless steel and aluminium. The team of professional staff works with the latest generation of bending machines, robots and advanced mechanical processing machines. Profile bending Bending the complete series of standard construction profiles, varying from a small UNP 80 up to a heavy HEA 1000 and tubes up to Ø610mm. Plate bending Rolling and press braking plates into dishes, cylinders and cones up to th=150mm and w=3.3m. Kersten Europe also bends special alloys, such as Hardox, Duplex,
Our scope
Inconel and clad materials.
* J-tubes
K
* S-tubes Additional processes
* Bellmouths
Kersten Europe offers complete project management. This includes: engineering,
* J-tube constructions
prototyping, (3D contour) cutting, qualified welding processes (EN1090), logistics
* Heavy cones and cylinders
and transport.
* Cable Access Towers * Heavy constructions
KIC InnoEnergy Benelux PO box 513 5600 MB Eindhoven The Netherlands T +31 (0)40 247 39 56 E ccbenelux@kic-innoenergy.com W www.kic-innoenergy.com
What we do KIC InnoEnergy is a world-class alliance of top European players with a proven
As CC Benelux we deliver innovative products and services for energy-efficient
track record. The consortium consists of 30+ shareholders and additional 100+
buildings and cities. We help entrepreneurs to realize start-up companies. The
partners: companies, research institutes, universities and business schools
Master, PDEng and PhD programs supported by KIC InnoEnergy will also enable
covering the whole energy mix. They are organized around six regional units or
students to shape future of energy.
Co-Location Centers (CC): France, Benelux, Germany, Iberia, Poland and Sweden.
Full partners: TU/e, KU Leuven, TNO, VITO, Eandis
Energy-Efficient Buildings and Cities
www.kic-innoenergy.com/ccbenelux
The Co-Location center Benelux (CC Benelux) coordinates the theme: ‘EnergyEfficient Buildings and Cities‘. Klaas Schuring, CEO: ‘It is a cross-disciplinary theme whose aim is to strengthen the sustainability of the energy system and to reduce environmental impact by developing the deployment of energy-efficient buildings and energy systems in cities’. The CC Benelux is establishing a joint innovation platform to stimulate and support innovation and high-tech entrepreneurship within the KIC InnoEnergy community.
FME ENERGY GUIDE 2014-2015
achtergrond_groen.indd 1 068-76_profielen_cleantech.indd 13
13
18-11-13 14:01 10:02 03-12-13
Locamation bv Beitelstraat 2 7556 NB Hengelo (Ov) The Netherlands T +31 (0)74 255 21 90 F +31 (0)74 255 21 99 E info@locamation.nl W www.locamation.nl @locamation
Locamation is a leading developer and supplier of proven, visionary substation
Benefits:
automation solutions by using standard information and communication tech-
1. Conventional Functions like Monitoring, Control and Protection combined with
nology.
new ones like Real-Time Thermal Rating or advanced Grid Analytics
Due to its 20 years of experience in primary and secondary substations
2. Functionality separated from interfacing to optimise lifetime spending of the
Locamation has continuously enhanced the capability and functionality of their
grid
products and solutions. Understanding that the challenges of the energy market
3. Installation and testing is very simple & fast to reduce downtime and opera-
transition towards a smart grid require more digitization of the grid and a new
tional costs.
architecture of the system Locamation is continuously opening its solution to become a real-time operating platform to execute the functions and algorithms needed to cover future challenges. In the early 90s, Locamation entered the electricity transmission and distribution market with SAS2000, a solution for high-voltage substation automation. In 2004 the SASensorTM solution was invented and today already a great number of primary and secondary substations mainly in the Netherlands, the UK, Sweden and China are equipped with this cutting-edge solution which contributes significantly towards better grid planning, TCO targets, distribution efficiency and
L N
improved quality of supply.
Nijhuis Water Industries Arnholtseweg 32 7091 HB Dinxperlo The Netherlands T +31 (0)315 65 54 66 F +31 (0)315 65 54 94 E info@nijhuisindustries.com W www.nijhuisindustries.com @Nijhuis_Ind
Purifying water, recovering valuable resources and energy Nijhuis Industries is an international group consisting of the Dutch subsidiaries: Nijhuis Water Technology and Nijhuis Ozone Solutions (former Excellent Ozone Solutions), as well as UK based Nijhuis H2OK. Nijhuis Industries is worldwide active offering solid solutions in a fluid world and has 2400 references in more than 50 countries with focus on the Food, Beverage, Dairy, Textile, Pharma, Oil, Gas and Agricultural industries. Offices in the Netherlands, Poland, Russia,
Nijhuis H2OK is as a specialist for wastewater treatment and flood risk manage-
Ukraine, China, Indonesia, U.S, Canada and Colombia and a global network of
ment, as well as a waste to energy turnkey solution provider. The company has
over 40 certified partners. Nijhuis Water Technology is specialized in the design,
the in-house skills and technical knowledge to provide clients with turnkey proj-
manufacture and delivery of ‘ready for use’ industrial waste water treatment
ects, from design to complete operational solutions.
and waste-to-value projects. Nijhuis Water Technology consistently operates at the forefront of sustainable, profitable innovation and real value-from-waste creation. Nijhuis Ozone Solutions is an expert in the field of cooling water and process water treatment with ozone. Its Q and XL series ozone treatment systems are among the most accurate, safest, most sustainable and energy-efficient systems in the world.
14 FME ENERGy GUIDE 2014-2015
068-76_profielen_cleantech.indd 14 achtergrond_groen.indd 1
04-12-13 10:02 11:38 18-11-13
achterg
13 10:02
NXP Semiconductors nv High Tech Campus 60 5656 AG Eindhoven The Netherlands T +31 (0)40 272 99 99 F +31 (0)40 272 99 61 E nederland.nxp@nxp.com W www.nxp.com
NXP Semiconductors nv (NASDAQ: NXPI) creates solutions that enable secure connections for a smarter world. Building on its expertise in High Performance Mixed Signal electronics, NXP is driving innovation in the automotive, identification and mobile industries, and in application areas including wireless infrastructure, lighting, healthcare, industrial, consumer tech and computing. NXP has operations in more than 25 countries, and posted revenue of $4.36 billion in 2012. Find out more at www.nxp.com. The smarter way to energy efficiency. NXP is committed to innovate for the benefit of our customers, our communities and society overall. Our research and development is focused on areas that contribute to improving quality of life for all. Our GreenChip technology, for example, is aimed at improving energy efficiency and reducing carbon emissions, and lies at the heart of our cost-effective, high-efficiency power and lighting ICs. GreenChip products are suitable for any device that draws AC power and offer many additional benefits, from minimal standby power (as low as 10 mW) to CFLdimming capability.
N
Plugwise Int. Headquarters Wattstraat 56 2171 TR Sassenheim The Netherlands T +31 (0)252 43 30 70 E info@plugwise.com W www.plugwise.com
P
The growing global demand for energy and the changing utilization of the grid due to increased usage of alternative energy resources has made the perfect combination of supply and demand of growing importance. By developing a smart network of electricity users. (e.g. appliances, lightning, heating and cooling.) peaks in energy consumption can be reduced and the available electricity can be distributed more evenly. Since 2006, Plugwise is dedicated to design, develop and produce wireless energy management and control systems to increase the building efficiency and sustainability within the residential and business markets. Plugwise is a Dutch company, internationally oriented and with a fully automated high-tech production facility in Eindhoven. Besides The Netherlands, Plugwise sales branches are located in Germany and Australia and are selling products directly to end users as well as through a growing network of selected (inter)national distribution partners. Plugwise products and services make it possible to move energy in time with Alert and Control: sending notifications and subsequently taking action in an automated manner. It is even possible to link up to Demand Response by which appliances can be switched on or off, louder or softer, based on the availability and price of energy.
FME ENERGY GUIDE 2014-2015
achtergrond_groen.indd 1 068-76_profielen_cleantech.indd 15
15
18-11-13 14:01 10:02 03-12-13
Smit Ovens Ekkersrijt 4302 5692 DH Son The Netherlands T +31 (0)499 49 45 49 F +31 (0)499 49 45 45 E info@smitovens.nl W www.smitovens.nl
Concerns about limited fossil fuel resources and carbon emissions are driving huge growth in green energy and solar power. We believe our knowledge and experience in thermal processes for glass, electronics and electronics-on-glass are invaluable to photovoltaic manufacturers. They can speed up the transition from product development and lab demonstrators to high-volume production. And by
Based on our in-house expertise, we can define thermal processes for virtually
continuously developing our technologies and ways of working, we can help push any application. We also invest heavily in R&D to develop entirely new process solar energy efficiency forward in line with evolving market demands.
types, often in cooperation with external partners. These partners include leading universities and research institutions such as TNO (the Dutch national applied
At Smit Ovens, we design and manufacture thermal process solutions for high-
science organization) and ECN (Energy research Center of the Netherlands). TNO
volume manufacturing. We understand the challenges involved in high volume
is active in numerous programs related to solar energy, while ECN investigates all
manufacturing of CIGS, CdTe and thin film silicon panels.
kinds of sustainable energy technology.
For Roll to Roll as well as glass substrates we defined solutions for mass production and R&D: deposition tools, active selenium reactors for crystallization, spatial ALD, fast cooling modules etc.
TCE Gofour bv Veenstraat 11 9502 EZ Stadskanaal PO box 435 9500 AK Stadskanaal The Netherlands T +31 (0)599 65 81 84 F +31 (0)599 62 16 03) E info@tcegofour.com W www.tcegofour.com
S T
Make Money, Make the Green Turn! TCE Gofour BV is an international organization that sells and develops “ecofriendly” products and services all over the world. Located in Stadskanaal in the province of Groningen, this pioneering company aims to develop revolutionary green technologies such as the Bio Product Processor and the HydroxFinn to preserve the living and working environment. All developed innovations by TCE
Bio Product Processor
Gofour BV are very cost efficient for the end user, with a short payback period and Valuable raw materials from crops without the need of having several subsidies.
“A technology that could be interesting for many links in the agrifood chain is the Bio Product Processor (BPP), developed by TCE GoFour from Stadskanaal. The jury
HydroxFinn
was impressed by the technology and the many possibilities of the BPP to pro-
The HydroxFinn is an effective retrofit hydrogen technology that significantly
duce biomass on location in the Netherlands as well as in developing countries”.
reduces both harmful emissions and fuel consumption. Designed for commercial
(Jury report Food Valley Award 2013)
diesel engines, the system is scalable from 200 hp (150 kW) power generators
The Bio Product Processor converts (on location) agricultural crops into high value
to the largest Wartsila-Sulzer RTA96-C 109,000 hp (82,000 kW). The system is an
food nutrients, electricity, heat and biofuel (APPO) by using an enzymatic process.
invaluable tool for the marine industry.
This makes it possible to completely meet your own energy needs in a fully sustainable manner.
16 FME ENERGy GuIDE 2014-2015
068-76_profielen_cleantech.indd 16 achtergrond_groen.indd 1
04-12-13 10:02 11:39 18-11-13
achterg
13 10:02
Typhoon Offshore Amstelveenseweg 760 1081 JK Amsterdamt The Netherlands E info@typhoonoffshore.eu W www.typhoonoffshore.eu
Typhoon Offshore is the Independent Energy Innovator with a unique expertise in offshore Wind. We are active in the European arena since 2010, and focus exclusively on the North Sea. We bring offshore wind from concept to reality. Where developers focus on the consenting phase of offshore wind projects, we bring these projects to a point where construction can begin. More specifically, Typhoon Offshore acquires permitted offshore wind projects and subsequently arranges all the contracting, structuring and financing to enable the offshore wind project to transition from paper to real spinning and electricity generating assets. Typhoon Offshore is currently developing project Gemini. The largest offshore wind farm in the Netherlands. The total 600MW of installed capacity will produce electricity for over 785,000 households /1,540,000 habitants per and equals a reduction in emissions of 1,250,000 Tons of CO2.
ZON Energie Groep Spanbroekerweg 162 1715 GV Spanbroek The Netherlands T +31 (0)226 45 08 85 F +31 (0) E info@zonenergie.nu W www.sunenergyinternational.com
Sustainable Solutions in ESCO models
T
ZON Energie and SUN Energy Balkan, provides, as an Energy Service Company (ESCo) sustainable solutions to utilities and households for heating, cooling and hot domestic water powered by renewable energy sources.
With development of advanced information systems we are able to introduce real time management of systems, metering substations and other asset manage-
An ESCO company is a comprehensive provider of broad range of energy related
ment applications. Parallel to this, companies gain automated real time analysis
services. Our services include design, implementation, risk management, energy
and reporting on key performance indicators. This way, operations are becoming
efficiency assessment, financing of projects, energy production and management
even more efficient allowing companies to further exceed energy saving require-
of such systems.
ments. This relatively new bre
We generate profits and return on our investments solely through achieving
When you build a new building or go for reconstruction of an existing one – we
energy savings. As a ESCO companie we operate on long term basis and often
support you throughout the project. Our role can be visible and significant from
involve re-investments in installed systems to further improve energy efficiency.
the beginning and assessment of the idea to financing and operation of the system.
Z FME ENERGY GUIDE 2014-2015
achtergrond_groen.indd 1 068-76_profielen_cleantech.indd 17
17
18-11-13 14:01 10:02 03-12-13