How To Equip Bluetooth to
RQ-HUNO
Cable
Bluetooth Board
Bluetooth Chip
2s rivet
1) Prepare “Bluetooth Board, Bluetooth Chip, 2s rivet, Cable”.
2) Take out Battery.
4) Connect one side of Cable to Bluetooth Board.
3) Take out Chest Part.
5) Put through the one side of Cable to the hole of Body part.
6) Make cable as shown above.
7) Insert cable to “COM� connector of RQ Controller.
8) Insert 2s rivets to Bluetooth Board.
9) 2s rivets are inserted as shown above.
10) Put “Bluetooth Board” into “Body Part”.
12) Check Bluetooth Chip Pin connector well.
11) You can see as show above.
13) Insert Bluetooth Chip.
14) Cover “Chest Part” to Body Part.
16) Completed!
15) Insert Battery as shown above.