Sealey leaflet Summer 2019 by InterCars SA

SPRING - SUMMER 2019 3 and 4Tonne Trolley Jacks with Rocket Lift

Model No. SEA 3040AY

Model No. SEA 3040AO Model No. SEA 3040AG

or • Heavy base design and large jacking saddle for increased load stability. • Universal joint release mechanism allows safer, more controlled lowering of the jack. • Rocket Lift feature brings lifting arm into contact with jacking point with minimal pumps. • Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. • Protective jack handle sleeve helps prevent accidental damage to car bodywork. • 2 Year Warranty - 2nd year subject to T&Cs and registration on website (www.sealey.co.uk).

Colour

Capacity

Min./Max. Saddle Height

Max. Chassis Height

Length

Weight

SEA 3040AG

Green

3tonne

100/533mm

162mm

734mm

38kg

SEA 3040AO

Orange

3tonne

100/533mm

162mm

734mm

38kg

SEA 3040AY

Yellow

3tonne

100/533mm

162mm

734mm

38kg

SEA 4040AG

Green

4tonne

100/533mm

162mm

745mm

44kg

SEA 4040AO

Orange

4tonne

100/533mm

162mm

745mm

44kg

SEA 4040AY

Yellow

4tonne

100/533mm

162mm

745mm

44kg

Model No.

Trolley Jack Features

PROTECTIVE 1 SLEEVE

2 MAGNETIC TRAY

1 LARGE 3 JACKING SADDLE

4 UNIVERSAL JOINT

2 4

5 TWIN PISTON

6 6 POLYURETHANE WHEELS

11pc Hammer-Thru Screwdriver Set

44pc Screwdriver, Hex Key & Bit Set

• Hardened and tempered Chrome Vanadium steel shafts with a satin polished finish. • Features hexagonal bolsters for use with a wrench. • Contoured, textured handles with hammer caps. • Shot blasted and blackened tips. • Contents: Slotted; 6 x 38, 5 x 100, 6 x 125, 8 x 150, 8 x 200, 10 x 200mm, Phillips; #2 x 38, #1 x 75, #2 x 100, #2 x 150, #3 x 150mm.

4pc Heavy-Duty Prybar Set

• Heavy-duty, angled shafts. • Chrome Molybdenum steel with blackened finish. • Textured comfort grip handles with hammer cap. • Contents: 200, 300, 460, 610mm.

Model No. SEA AK9105

100W Soldering Iron

• Class 1 electrically insulated soldering iron with cool grip handle which stays comfortable during prolonged use. • Fitted with replaceable soldering tip. • Includes 1.5m cable with BS approved 230V/13Amp plug. • Complies with Low Voltage Directive and Model No. Electromagnetic SEA SD100 Compatibility Directives.

Model No. SEA AK4933

Model No. SEA S01090

Telescopic Magnetic Pick-Up Tool 1kg Capacity

Ø40mm Telescopic Articulated Inspection Mirror

• Chromed metal body with pocket clip for safe storage. • 1kg Pick-up capacity from Ø10mm magnet. • Minimum/Maximum Length: 130/650mm.

• Chromed metal body with pocket-clip for safe storage. • Ø40mm inspection mirror mounted on ball joint permitting full 360° rotation. • Minimum/Maximum Length: 125/690mm.

Model No. SEA AK651

Mini Robot Soldering Stand with Magnifier

Professional Soldering Kit

• Ideal for awkward jobs where a third hand is needed. • Cast steel base for extra stability. • Fitted with two fully articulated crocodile clamps and Ø60mm magnifying glass.

• • • •

8pc Soldering Gun/Iron Kit

• Comprehensive kit comprising 100W soldering gun, 30W soldering iron, iron holder, excess solder extractor, scraper, spare tips, solder wire and universal workpiece clamps. • Fitted with BS approved plugs.

• Chrome Vanadium satin finish shafts with shot blasted and magnetized tips. • Contoured soft grip handles with colour-coding for fast identification and hanging hole for alternative storage. • Contents: Screwdrivers; Slotted - 3 x 75, 4 x 100, 5 x 100, 6 x 125, 8 x 150mm, Phillips - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, Pozi - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, TRX-Star* - T25 x 100, T27 x 100, T30 x 125, T40 x 125mm, Bit Driver, 1/4" Hex Bits; TRX-Star* - T7, T8, T9, T10, T15, T20, Hex - 3, 4, 5, 6mm, Hex Keys; Metric - 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm, Imperial - 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4".

Model No. SEA SD150

Model No. SEA AK652

30/100W Dual powered pistol type soldering gun. Boost trigger function to increase temperature. Fitted with 1.5m cable and BS approved 230V/13Amp plug. Includes soldering wire, solder sucker, workpiece Model No. stand and metal soldering SEA SD250K iron stand.

Auto Darkening Welding Helmet Shade 9-13

Model No. SEA SD300K

• Welding helmet with infinitely adjustable shade control between 9-13. • Complies with BS EN 379, BS EN 175 and DIN standards. • Fully automatic switching from light to dark on striking arc. • Shade is selected by a rotary knob on side of helmet. • Grinding function enables user to grind without removing mask. • Solar panel power supply. • Features sensitivity and delay controls for switching light to dark. • Contoured design helmet with adjustable headband for added comfort. • Suitable for MIG, TIG and arc welding.

Model No. SEA S01001

56pc Security TRX-Star*/Hex/ Ribe/Spline Bit Set 3/8" & 1/2"Sq Drive

10pc Pipe Flaring & Cutting Kit

• Manufactured from Chrome Vanadium 6150 steel. • Convenient high-impact carry-case presents bits at an angle for easy selection. • Contents: Security TRX-Star* Bits; T20H, T25H, T30H, T40H, T45H, T50H, T55H, T60H (1 each 30 & 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 & 75mm), Ribe Bits; M5, M6, M7, M8, M10, M12, M14 (1 each 30 & 75mm), Model No. Spline Bits; M5, M6, M8, M10, M12 (1 each 30 & 75mm), SEA AK21956 Drive Adaptors; 3/8"Sq x 10mm Hex, 1/2"Sq x 10mm Hex.

Locking Pocket Knife

• Supplied with a high quality stainless steel blade. • Fitted with lightweight aluminium handle inlaid with rubber grip for added comfort and control. Model No. • Blade locks open for safe use. SEA PK1 • Supplied with belt clip.

2pc 15 Function Multi-Tool & Twin Blade Knife Set

• • • •

Manufactured from high quality stainless steel. Fully hardened and tempered for long life. Lightweight aluminium/composite handle construction. Multi-tool functions include combination pliers, long nose pliers, wire cutter, fine edge blade, bottle opener, can opener, slotted screwdrivers, Phillips screwdriver, fish scaler, file, Model No. hook remover, ruler, wood SEA PK27 saw and single/double file.

15 Function Multi-Tool

• • • •

500mm Magnetic Tool Holder

• Wall or toolbox mounting magnetic rack. • Size: 500 x 40mm. • Suitable for retaining frequently used steel tools such as screwdrivers, Model No. spanners and pliers. SEA AK211 • Supplied with fixing screws.

16pc 1/2"Sq Drive Deep Impact Socket Set- Metric

• Manufactured from Chrome Vanadium steel, hardened, tempered and with a phosphate finish for added corrosion resistance. • Deep WallDrive® sockets allow a transfer of up to 30% more torque to the fixing. • Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm. • Supplied in carry-case.

• Tubing kit suitable for cutting and flaring copper, brass or thin walled aluminium pipe. • Includes screw-type tube cutter with die-cast frame and integral de-burring tool. • Dies: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8".

Model No. SEA AK506

15 Function Multi-Tool

• • • •

Manufactured from high quality stainless steel. Fully hardened and tempered for long life. Fine blanking construction for superior performance. Multi-tool functions include pliers, wire cutters, scissors, wood saw, leather punch, bottle opener, file with hook remover, can opener, Model No. fine edge blade, slotted and SEA PK36 Phillips screwdrivers.

70mm 1"Sq Drive Impact Socket

• Chrome Molybdenum, drop-forged, WallDrive® impact socket. • Phosphate finish for greater corrosion resistance. • Ideal for use with air impact wrenches.

Model No. SEA IS170

53pc 3.6V Li-ion Cordless Screwdriver Set

Model No. SEA AK5816M

• Powerful, lightweight screwdriver featuring locking swivel adjustment from pistol to straight type. • Forward, reverse and trigger-lock control. • Eight adjustable torque settings. • Integral LED light to illuminate working area. • LED Torch in base of handle. • Quick-release 6mm bit holder. • Contents: Screwdriver Bits; Slotted - 3 (x2), 4 (x2), 5 (x2), 6mm (x2), Phillips - #1 (x5), #2 (x5), #3 (x4), Pozi - #1 (x4), #2 (x4), #3 (x4), TRX-Star* - T8 (x2), T10 (x2), T15 (x2), T20, T25, T27, T30, T40, T45, Hex - 3 (x2), 4 (x2), 5mm (x2), Magnetic Bit Holder.

Model No. SEA CP36S

Hydraulic Bearing Separator/Puller

3pc Triple Leg Gear Puller Set

• Forged steel three-way bearing separator and gear puller set. • Operated with supplied 10tonne hydraulic ram or manual force screw. • Puller Leg Reach (Size/Spread): 160 (190)mm. • Separator Capacity: 30-84mm. • Manual Thrust Screw Length: 210mm. • Selection of extension rods (x3): 15, 65, 185, 340mm.

• Drop-forged, carbon steel reversible legs, and body. • Swivel thrust plates on larger sizes prevent damage to shaft ends. • Hex head forcing screws suitable for use with a ratchet or spanner. • Size/Spread: 75, 100, 150mm.

Twin Leg Puller Bar Type 80 x 100mm

Easy removal of pulleys, flywheels, bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Zinc plated for corrosion resistance. Model No. • Thrust bearing prevents SEA AK46080 wear and damage to shaft. • • • •

Rear Main Oil Seal Remover/Installer Land Rover 2.25

• Crankshaft rear seal remover/installer. • Time saving tool, supplied with pin punch and self tapping screws to easily remove the old seal. • Unique design ensures the new seal is pushed in squarely and correctly. • Fits all petrol and diesel Model No. 2.25 engines with five SEA VSE3038 bearing crankshaft.

Model No. SEA PS9821

4pc O-Ring Removal Tool Set

• Set of four angled tools that allow removal of O-rings and seals without damage. • Features contoured and spoon tips. • Lengths: 130, 200mm.

Model No. SEA VS5211

8 & 10mm Glow Plug Heater Element Removal Set

Model No. SEA AK78

600mm Engine Dipstick - Audi

• Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems. • Can also be used to calibrate the driver’s instrument panel. • Will also check the engine oil level on Audi; A4/A5 3.2 Model No. 6-cylinder engines. SEA VS600ED

7pc 3/8" & 1/2"Sq Drive Oxygen Sensor Socket Set

• For removing the heater element that can break off during glow plug removal. • Supplied with seven drilling/tapping guides: M8 x 1, M10 x 1, M10 x 1.25mm. • Five glow plug extraction adaptors: M8 x 1, M10 x 1, M10 x 1.25mm. • Thread: M8, M10. Model • Drill Ø: 2.5, 3.3mm.

No. SEA VS315

• Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. • Windows and slots enable sockets to be fitted over wiring harness.

Model No. SEA SX032

Diesel Injection Leak Back Master Kit Bosch/Delphi/Denso

Thermal Imaging Camera

• Updated kit designed to measure return fuel flow on diesel vehicles up to six cylinders, fitted with common rail injection system. • Identifies worn, blocked or inoperative injectors quickly and easily. • Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation. • Master kit includes range of adaptors to suit Bosch, Delphi, Model No. New Delphi and Denso injectors for comprehensive SEA VS2048 coverage of common rail diesel vehicles.

• Combines the function of surface temperature measurement and real-time thermal imaging. • Features a traditional image camera to pinpoint test area with the ability to mix the thermal image over the top at varying intensities. • Includes on-screen cursor to accurately locate temperature hotspots. • Suitable for many industries including automotive, building and electrical. • Screen Size: 52mm. • Focal Distance: 50cm (Min. 20cm, Max. 1m). Model No. • Field of Vision: 65°. SEA VS912 • Powered by 4 x AA batteries (supplied).

Infrared Laser Digital Thermometer 12:1

Dial Bore Gauge 50-160mm

• Detects energy emission in the infrared spectrum and converts reading into a display of temperature. • Features laser pointer, data hold and auto power off. • Temperature is displayed on a large 23mm LCD panel with back-lit display for use in low light areas. • Temperature can be shown in either °C or °F. • Temperature Range: -50°C to +550°C/-58°F to +1022°F. • Powered by 9V battery (supplied).

• Precision mechanism with Ø55mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality. • Measuring Range: 50-160mm. • Will indicate the deviation from set size by up to 5mm with an accuracy of 0.01mm. • Probe body, dial indicator, anvils and spacer rings are also included. • Supplied in wooden storage case.

Model No. SEA VS904

Model No. SEA DBG5010

Piston Ring Groove Cleaner

12mm Spark Plug Thread Chaser

300mm Spark Plug Pliers

• Fast and reliable removal of carbon and glaze deposits from piston ring grooves. • Suitable for pistons between Ø51mm and Ø127mm. • Supplied with three 6-bladed Model No. cutters covering most SEA VS148 popular piston groove sizes.

• Suitable for cleaning corrosion and carbon build-up from spark plug threads. • Also possible to restore minor cross threading damage. • Designed for deep seated plugs where a slim profile drive is necessary to fit down into the head. • Features shank above threads for recessed threads. Model No. • Thread Length: 20mm. SEA VS724 • Drive: 3/8"Sq.

• Suitable for removal of spark plug boot on deep-seated engine applications. • Composite handles provide insulation from HT shock and Model No. give added comfort and SEA VS867 control.

OHV Valve Spring Compressor

Valve Collet Remover/Installer

• Permits valve springs and valve stem oil seals to be replaced without the need to remove the cylinder head when used in conjunction with VS1601 Compressed Air Adaptor. • Reversible jaw adaptor and automatic cam action lock to pre-set spring tension. • Suitable for use on a wide Model No. range of OHV, OHC and SEA VS160 CVH engines.

• For quick removal/installation of valve collets. • Firmly push or tap tool with a hammer to remove/install, magnet in tool captures collets. • Can be used with cylinder head in-situ or on work bench. • Ideal for replacing broken valve springs or valve stem oil seals without removing the head from the engine. • For in-situ use, a suitable adaptor (not included) will be required to allow compressed air into the combustion chamber to hold the valve Model No. closed while compressing SEA VS1542 the valve spring.

Valve Stem Seal Pliers Long Stem Straight 16/24v

• Steel long stem aids removal and installation of valve stem seals on 16 and 24 valve OHC engines. • Serrated tips aid grip. • Especially suited to Model No. stubborn seals.

SEA VS1671

Valve Spring Compressor Multi-Valve

• Suitable for use on multi-valve petrol and diesel engines with deep-seated valves. • Suitable also for general use on OHC, OHV and CVH engines. • Universal jaw with 55-175mm capacity and 165mm throat depth. • Reversible jaw and adaptor. Model No. • Twin cam action permits use from above or below valve. SEA VS154

2pc Valve Grinder Set

Damaged Glow Plug Removal Set 8 & 10mm

• Set of two valve grinders with wooden shafts. • Suitable for grinding most engine valves. • Features four sizes of rubber suction cup.

• Designed to remove damaged/broken glow plugs from cylinder heads. • Suitable for glow plugs with an M8 x 1mm and M10 x 1mm thread. • Set includes all required adaptors for drilling, centring and pulling for the safe removal of glow plug. Model No.

Model No. SEA VS1653

SEA SX0408

Turbo System Leakage Tester

Turbo System Leakage Tester - Commercial

• Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system. • Kit supplied with four pairs of stepped adaptors to fit most sizes of hose. • Adaptor Sizes: 35-90mm. • Features a pressure gauge, shut-off valve and pressure release valve. Model No. • Can also be used on cooling system hoses. SEA VS2030 • Supplied in storage case.

26 Blade Offset Feeler Gauge Dual Marked

• • • •

Imperial graduated 26 blade feeler gauge. Sizes: 0.005" to 0.030" (0.127 to 0.762mm). Dual marked in Imperial and Metric. Blade dimensions Model No. 100 x 12.7mm (45º-25mm offset). SEA S0515

• Designed to charge the turbo/intercooler system with a low pressure of regulated workshop air to show the presence of leaks within the system. • Features a pressure gauge, shut-off valve and pressure release valve. • Kit supplied with three pairs of stepped adaptors to fit most sizes of hose found on heavy commercial vehicles. Model No. • Adaptor Sizes: 105-110, 115-120, 125-130mm. SEA CV2030 • Supplied in storage case.

12 Blade Offset Feeler Gauge Dual Marked

• • • •

Imperial graduated 12 blade feeler gauge. Sizes: 0.008" to 0.026" (0.203 to 0.660mm). Dual marked in Imperial and Metric. Blade dimensions Model No. 95 x 13mm (45º-25mm offset). SEA S0516

Fuel Injection Pressure Test Kit Test Port

• Comprehensive kit of adaptors and fittings for modern Schrader test-port fuel injection systems. • Components fitted with quick coupling system and safety valve to prevent inadvertent discharge of fuel under pressure. • High pressure, dual scale gauge with hanging hook and protective bumper. • Pressure release valve Model No. with drain hose for safe SEA VSE211 fuel recovery.

Fuel Feed Pipe Pliers

3pc Petrol Engine Compression Test Kit

• Suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters. • Designed to compress the quick connect lugs for easy removal without damaging the connector.

• Aluminium alloy construction with profiled head. • Suitable for releasing connections on in-line fuel line filters. • Fitted with long handle for restricted access.

• Fitted with Ø65mm gauge having two scales, reading from 0-300psi and 0-2000kPa. • Includes quick coupling 150mm rigid stem with cone-type adaptor and 320mm flexible adaptor with 14 and 18mm screw in adaptors. • Supplied in carry-case. Model No.

Model No. SEA VS0453

Diesel High Pressure Pump Test Kit

Model No. SEA VS0458

SEA CT951

Compression Test Kit - Diesel

• Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses. • The kit also includes a set of dummy pump regulator and injector pipe blanks. • Kit allows for a variety of tests to be conducted: - Engine cranking/running pressure test - Maximum pump pressure test - Pump pressure regulator test - Injector leakage test

Model No. SEA VS216

• Up-to-date kit for compression testing on diesel vehicles. • Contains 17 of the most common dummy glow plugs, covering 29 glow plug types, 33 manufacturers and over 500 model/engine variants from 1999 to 2015. • Also includes a set of injector adaptors if an alternative method of testing is required. Model No. • See instructions on Sealey website for complete SEA VSE3158 vehicle applications.

14pc Diesel Injector Puller Set

Air Hammer Adaptor for Injector Puller

• Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors. • Ball joint allows hammer to be used in confined areas. • Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector. • Supplied in carry-case. • Contents: Slide Hammer, 1/2"Sq Drive Sockets; 25, 27, 29, Model No. 30mm, Tamper-Proof Key, Adaptor (x5) SEA VS2059 (Bosch, Delphi, Denso, Siemens), Ball Joint.

• For use with Sealey injector puller slide hammer sets Model No’s VS2059 & VS2064 or a similar tool that has a minimum 350mm shaft length and air hammer. • Adaptor allows the air hammer to be used to vibrate the injector loose, instead of using a slide hammer. • Ideal for stubborn injectors when an alternative method of removal is required. Model No. • Adaptor Shank Size: .401" Parker Taper. SEA VS2074 • Supplied in storage case.

Diesel Fuel System Priming Device

4pc Air Conditioning Spring Lock Coupling Tool Set

• Essential for reintroduction of fuel into fuel pump following maintenance such as fitting of new diesel filter or following drainage of fuel tank. • Must be used whenever Model No. fuel system is disturbed. SEA VS055

• Spring type coupling connectors for air conditioning lines. • Locking action prevents spray when disconnecting lines. • Suitable for most Chrysler, Model No. Ford and Vauxhall/Opel SEA VS0454 vehicles.

Fuel Tank Sender Spanner 3-Leg Ø70-165mm 24mm Hex Drive

Diesel Injector Puller BMW M47/M57

• For removing and refitting fuel tank sender mounting rings.

Model No. SEA VS6423

• Designed to remove the copper injector seal when it has stuck into the head. • Adjusts to allow seals with 6.7-8.7mm internal diameter to be removed. • Simply drop the tool into the hole left by the injector, tighten the handle and lift out the seal.

Model No. SEA VS2054

Fuel Line Pliers - VAG

• Designed for removing BMW 2.0, 2.5, 3.0 diesel fuel injectors from M47/M57 engines. • Allows the removal of seized injectors without the need to remove the cylinder head. • Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector. • Also suitable for some Land Rover, MG and Model No. Vauxhall/Opel vehicles that SEA VS2075 share the same engine.

Transfer Syphon Pump - Oil/Petrol/Diesel

Injector Seal Removal Tool

• Suitable for fuel lines on VAG group vehicles with sprung hose clips. • Rotating jaws for easy access to hose clips in confined spaces. • Spring loaded jaws.

Model No. SEA VS0427

8ltr Vacuum Fuel/Fluid Extractor

• Suitable for the extraction of all types of engine, transmission and lubricating oils from vehicles and machinery. • Also suitable for the extraction of petrol/diesel and low viscosity fluids. • 1.5m Main hose, Ø6.7 x 700mm dipstick oil probe and Ø7 x 400mm universal fluid probe. • Supplied with 240mm fuel system adaptor for use in conjunction with fuel kit Model No’s VS552, VS553, VS554 and VS555. • Can also be used for draining fish tanks, basins and sinks. • Capacity: 8ltr. • Suitable for the syphoning of oil, petrol, diesel and non-aggressive fluids. • Delivers approximately 9ltr/min. • Transfer Pump Hoses: Ø13mm x 1m (x2), Ø18mm x 1m (x2).

Model No. SEA VS560

Model No. SEA TP204

Fuel Filter Key - VW/Volvo 2.0/2.4/2.5 Diesel

• For removing and refitting the fuel filter cap when replacing the fuel cartridge on diesel 2.0D, 2.4D and 2.5TDi engines found in VW and Volvo vehicles. • Drive: 3/8"Sq.

6pc Double End Oil Drain Plug Key Set

Model No. SEA VS6427

• For removing and refitting fuel filter bowl when replacing the fuel cartridge.

Model No. SEA VS6428

Drain Plug Thread Repair Set

VAG Oil Drain Plug key

• Superb for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied). • Set is suitable for the most popular threads used on cars and light commercial vehicles. • Tap Sizes: M13 x 1.5, Model No. M15 x 1.5, M17 x 1.5, SEA VS660 M20 x 1.5mm.

• 1/4"Sq drive key. • Suitable for the plastic sump plugs found on VAG TFSi engines. • Can also be used on the cam Model No. cover of new 1.6 and 2.0 twin SEA VS652 cam diesel VAG engines.

20pc 3/8"Sq Drive Oil Drain Plug Key Set

Safety Sump Plug Remover

Oil Drain Plug Thread Repair Set - M15

• Comprehensive set of keys with mini breaker bar. • Suitable for sump plugs on engine, gearbox and back axle. • Includes the new VAG plastic Model No. sump plug key.

• Designed to remove the sump plug after it has been loosened, without making contact with hazardous hot oil. • Features 90° edge for turning Model No. aid, and magnet for stability.

• Ideal for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer. Model No. • Tap Size: M15 x 1.5mm.

• Double end carbon steel keys with chemically blackened finish. • Suitable for sump plugs on engine, gearbox and back axle. • Use with 19mm socket on ratchet driver. • Supplied in storage case.

Model No. SEA AK658

SEA AK6587

Fuel Filter Key - Ford Transit

SEA VS651

Oil Drain Plug Master Thread Repair Set

21pc 3/8"Sq Drive Oil Drain Plug Key Set

• Comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied). • Set is suitable for the most popular threads used on cars and light commercial vehicles. • Tap Sizes: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5mm.

• Comprehensive set of Chrome Vanadium steel keys with sliding T-bar. • Suitable for sump plugs on engine, gearbox and back axle. • Contents: Square Male; 7, 8, 10, 11, 12, 13, 14mm, 5/16", 3/8", Square Female; 10mm, Hex; 8, 9, 10, 12, 13, 14, 17mm, Triangle; 10mm (PSA), Security Spline; M16 (VAG), TRX-Star*; T45 (Vauxhall/Opel), 3/8"Sq Drive Sliding T-Bar.

Model No. SEA VS661

SEA VS615

Model No. SEA AK6586

T-Handle Oil Drain Plug Key - VAG

3/8" & 1/2"Sq Drive Oil Filter Claw Wrench 65-110mm Capacity

Oil Filter Strap Wrench Ø60-140mm Capacity

• Designed specifically for the plastic sump plugs found on the VAG TFSi engines. • Also designed for use on the cam cover of new 1.6 and 2.0 twin cam diesel VAG engines. • Features T-handle for quick operation.

• Satin chrome finish steel construction with 1/2" & 3/8"Sq drives. • Also suitable for use with a 21mm spanner. • Claws grip filter tighter as more torque is applied.

• Satin finished, drop-forged steel body with hanging hole. • Reinforced, rubberised strap.

Model No. SEA AK643

Model No. SEA VS653

Model No. SEA AK6404

150mm Strap Wrench

Oil Filter Wrench Band Type 65-105mm Capacity

Ø64.5mm Oil Filter Cap Wrench 14 Flutes - Lexus/Toyota

• Suitable for removing and installing oil filters as well as many other applications. • Adjustable strap fits filters up to Ø150mm. • Features soft grip handle for added comfort.

• Band type filter wrench. • Steel strap with heavy-duty cast body and control knob. • Removes filters with minimal risk of damage.

• Cap type oil filter wrench. • Crowned top provides extra leverage points for removing stubborn oil filter housing caps. • Aluminium alloy material minimises risk of damage to filter housing.

Model No. SEA AK644

Model No. SEA AK6407

Model No. SEA VS7112

15pc Oil Filter Cap Wrench Set

3/8" & 1/2"Sq Drive Oil Filter Claw Wrench 63-103mm Capacity

3/8" & 1/2"Sq Drive Oil Filter Strap Wrench 300mm Capacity

• Cap type filter wrenches, made from 7 and 16 gauge steel and can withstand up to 115Nm(85lb.ft) of torque. • Designed to grip like sockets, thereby minimising the possibility of crushing filters. • Electro-black oxide finish for rust protection. Model No. • Use with 3/8" or 1/2"Sq SEA VS7003 drive wrenches.

• Satin finished carbon steel construction with 3/8" & 1/2"Sq drive. • Also suitable for use with a 21mm spanner. • Claws grip filter tighter as more torque is applied.

• Satin finish cast steel body with 3/8" and 1/2"Sq drives. • May also be used with a 21mm(13/16") spanner. • Extra wide Nylon webbing strap suitable for filters up to Ø300mm. • Use with ratchet wrench.

Model No. SEA AK642

Model No. SEA AK6403

Oil Filter Wrench Band Type Ø105-155mm Capacity

• Band type filter wrench. • Steel strap with heavy-duty cast body and control knob. • Removes filters with minimal risk of damage.

Model No. SEA AK645

Ø74mm Oil Filter Cap Wrench 14 Flutes

• • • •

Cap type filter wrench prevents damage to filter housing. Will withstand up to 115Nm (85lb.ft) of torque. Low profile design suitable for use in confined areas. Applications: Purlux grove filters fitted to Audi, BMW, Citroen, Fiat, Ford, Lancia, Mazda, Mercedes, Nissan, Peugeot, Model No. Porsche, Renault, Suzuki, SEA SX226 Toyota, Vauxhall/Opel, VW.

Ø64.5mm Oil Filter Cap Wrench 14 Flutes - Toyota

Oil Filter Cap Wrench - Mazda 1.5 Diesel

• Cap type oil filter wrench. • Crowned top provides extra leverage points for removing stubborn oil filter housing caps. • Aluminium alloy material minimises risk of damage to filter housing.

• Cap type oil filter wrench. • Designed for the 1.5 Skyactiv-D Mazda engine, launched in 2015. • Aluminium alloy material minimises risk of damage to filter.

Model No. SEA VS7111

Ø96mm Oil Filter Cap Wrench 18 Flutes - Renault

• Cap type oil filter wrench. • Crowned top provides extra leverage points for removing stubborn oil filters. • Aluminium alloy material minimises risk of damage to filter housing.

Model No. SEA VS7115

Model No. SEA VS7116

Oil Filter Remover - Vauxhall 2.0/2.2 Petrol

• Suitable for removing the cap from the oil filter housing on Vauxhall/Opel 2.0/2.2 petrol engines. • Allows access to the hard-to-reach 32mm hex located on the filter cap. • Use with 1/2"Sq drive wrench.

Model No. SEA VS7201

Oil Filter Cap Remover Ford/Jaguar/Citroen/Peugeot 2.0D/2.2D Diesel

• Suitable for removing the cap from the oil filter housing on Ford, Citroen, Peugeot 2.0D/2.2D HDi/TDCi diesel engines (DW10C, DW12C) and Jaguar XF 2.2D from 2012 onwards. • Allows access to the hard-to-reach 27mm hex located on the filter cap. • Use with 1/2"Sq drive wrench. Model No.

SEA VS7200

30pc Oil Filter Cap Wrench Set

• Extensive set designed for a wide range of vehicles. • Cap type filter wrenches, made from 7 and 16 gauge steel, will withstand up to 115Nm (85lb.ft) of torque. • Designed to grip like sockets, thereby minimising the possibility of crushed filters. • Adaptor allows use with 3/8" or 1/2"Sq drive wrenches. Model No. • Adjustable oil filter wrench Ø65-120mm. SEA VS7006

Under Vehicle Engine/Gearbox Support

• Designed to support the engine or gearbox when mountings or gearbox are being removed. • Ideal when replacing clutches or timing belts. • Removes the need for using a transmission jack or engine support beam. • Fully adjustable, making the unit suitable for most transverse and in-line configurations. • Fitting is by suspending underneath the vehicle by support hooks and counter-balanced Model No. against the underside of the vehicle. SEA VS0110

Thread Inserts

Thread Repair Master Kit

• Suitable for five common sizes of thread. • Creates a stronger internal thread in soft metals. • Ideal for repairing damaged or stripped internal threads. • Protects tapped threads against wear and damage. • Includes drill bits, thread taps, insert installation and lug breaking tools. • Supplied in metal storage case.

Model No. TRM6R

Model No. SEA TRMK

Thread Repair Kit M5 x 0.8mm

Model No. TRM10R

Model No.

Size

SEA TRM5R

M5 x 0.8mm

SEA TRM6R

M6 x 1mm

SEA TRM8R

M8 x 1.25mm

SEA TRM9R

M9 x 1.25mm

SEA TRM10R

M10 x 1.5mm

SEA TRM12R

M12 x 1.75mm

SEA TRM14R

M14 x 1.25mm

Video Borescope Ø5.5mm Camera

• Creates a stronger internal thread in soft metals. • Ideal for repairing damaged or stripped internal threads. • Protects tapped threads against wear and damage. • Includes drill bit, thread tap, insert installation and lug breaking tool. • Supplied with three different lengths of thread insert.

M14 x 1.25mm 15mm Thread Insert for VS301 Pack of 10

• Thread inserts for Model No. VS301.

• High performance pistol grip borescope with 85mm colour TFT screen and waterproof probe pod with IP67 rating. • Features video record/playback, still images and stream live video via the AV out connection. • Videos and images are stored on a 4GB micro SD card (supplied) allowing up to 4.5 hours of video and 10,000 images, which can be transferred to a PC via the USB connection. • Also features digital zoom control and rotate/flip control of image. • Powered by lithium-ion battery pack giving up to 4 hours continuous use. • Kit includes 45° mirror and magnetic pick-up. • AV and USB cables supplied.

Model No. SEA TRM5

Model No. SEA VS301.15

Ø3.9mm Camera Probe for VS8230, VS8231 & VS8232

Model No. SEA VS8231

• Ø3.9mm Borescope probe with 320 x 240 camera resolution. • Waterproof probe pod with IP67 rating. • Features lighting LEDs for a clear image in dark areas. • Small enough to fit into a diesel combustion chamber through the glow plug hole. • Use with Model No. VS8232, optional for Model No’s VS8230 and VS8231.

Video Borescope Ø3.9mm Camera

Tablet Video Borescope Ø5.5mm Camera

• Large 110mm TFT screen and tablet design makes the image incredibly clear but also very portable. • Includes the added advantage of probe storage inside the rear of the case so no additional storage required. • Features controls for light intensity, digital zoom and image rotation. • Waterproof probe pod with IP67 rating and supplied in storage pouch. • Powered by 4 x AA batteries (supplied).

Model No. SEA VS8232

Model No. SEA VS8239

Model No. SEA VS8223

Workshop Timing Light

Exhaust Adaptor for Twin Pipes

Exhaust Spring Clamp Removal Tool VAG

• Composite cased Xenon timing light with inductive impulse pick-up. • 8000rpm maximum. • Supplied with 1.5m coiled 12V power supply lead, inductive coupler and operating instructions.

• Features soft rubber cylindrical exhaust pipe cones to suit most vehicles. • Allows exhaust fume extractor to be used on twin exhaust vehicles. • Suitable for use with EFS07 Exhaust Fume Extractor. • Extractor Connector: Ø65-90mm Male Taper.

• Robust steel tool for the safe removal and installation of exhaust-to-manifold spring clamps. • Applications: Audi, Seat, Skoda, VW.

Model No. SEA TL84

Model No. SEA EFS07DE

Model No. SEA VS1638

350ml Oil Inspection Syringe

3pc Fluid Transfer Syringe Set

Clutch Alignment Tool - Land Rover

• Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials. • Translucent body allows easy inspection of oils and fluids. • Includes twist shut-off valve to stop fluid escaping. • Fluid Compatibility: AdBlue®, Antifreeze, Brake Fluid, Model No. Diesel, Oil, Water.

• Three multipurpose syringes with Viton® seals, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials. • Set contains two suction syringes with collection bottles and a traditional suction/pump syringe with fluid shut-off valve. • Fluid Compatibility: AdBlue®, Antifreeze, Brake Fluid, Diesel, Model No. Oil, Water. SEA VS408 • Syringe/Bottle Capacity: 0.35/1ltr.

• Double end tool for aligning the clutch plate when fitting the clutch cover on Land Rover vehicles.

5ltr Transmission Oil Filling System

Brake Fluid Tester - Electrolytic

Pocket Brake Fluid Tester

Comparative electrolytic type tester. Checks moisture content of fluid by resistance to electric current. Easily calibrated using new brake fluid. Audible test cycle with three LED read-out. Just insert probe and press button for immediate result. Works on DOT 3, 4 and 5.1 specification fluids. Model No. • Powered by a 9V battery SEA VS027 (not included).

• Integrated circuitry checks moisture content of fluid by measuring the electrical resistance and comparing it with acceptable limits. • Easy calibration check using water. • Five LED read-out. • Just switch on and insert probe for immediate result. • Works on all grades of brake fluid. Model No. • Powered by one AAA SEA VS0274 battery (supplied).

SEA VS407

• • • • •

Pump operated oil dispensing unit with a five litre capacity. Ideal for filling manual transmissions and differentials. Supplied with 100° hooked metal and flexible adaptors. Features a fluid shut-off valve to prevent accidental spillage. Includes a pressure gauge.

Model No. SEA VS70096

• • • • • •

Model No. SEA VS713

Vacuum Tester & Brake Bleeding Kit

• Multifunction diagnostic tool used to test a variety of essential engine and associated functions. • Also includes reservoir, hoses and adaptors for bleeding brake and clutch systems. • Brass-bodied vacuum pump with easy-to-read vacuum gauge. • Contents: Vacuum Pump, Fluid Container, Transfer Cap, Vacuum Hoses; 2 x 560mm, 4 x 80mm, 5 x Assorted Vacuum Hose Fittings, 3 x Bleed Nipple Adaptors. • Supplied in carry-case.

1ltr Pneumatic Vacuum Brake Bleeder

• • • • •

The simple way to bleed hydraulic brakes. One-man operation. No special reservoir caps required. Uses regular 90psi air supply. Supplied with complete Model No. operating instructions. SEA VS020

Brake & Clutch Bleeder

Bleeding requires no external power source. Design incorporates pressure control valve set at 20psi. Pressure range makes unit suitable for use with ABS systems. Fitted with Ø45mm cap which is suitable for most Model No. European models. SEA VS1205 • Capacity: 400ml. • • • •

Brake & Clutch Bleeding System

• One-man brake and clutch bleeding the professional way. Bleeding requires no external power source. • Reservoir holds 2.5ltr of hydraulic fluid - flush the entire system with one fill, without the risk of running the reservoir dry. • Pressure range makes unit suitable for use with ABS systems. • Fitted with Ø45mm cap with 90° angled connector which is suitable for most European models. • For other applications, order optional Brake Reservoir Cap 45mm Straight Connector - Model No. VS820SA, Universal Adaptor - Model No. VS820UA and Bleeder Cap Set - Model No. VS0204B.

Model No. SEA VS402

45mm Brake Reservoir Cap Straight Connector

Brake & Clutch Bleeding System Universal Adaptor

• For use in conjunction with Model No's VS820, VS821 & VS0204A Brake & Clutch Bleeding System. • Brake reservoir cap Ø45mm with straight connector.

• Universal reservoir cap for Model No’s VS820, VS821 & VS0204A Brake & Clutch Bleeding System. • Supplied with quick connect.

Model No. SEA VS820SA

Model No. SEA VS820UA

1ltr Chemical Sprayer

Brake Pipe Flaring Tool - Turret Type

• Ideal for use with some brake cleaners, detergents, traffic film remover, penetrating oils and weed killer. • Adjustable nozzle enables easy and direct application of liquid exactly where it is required. • Viton® seals allow use with a wide range of semi volatile chemicals that would deteriorate standard seals. • A compatibility document is available.

• Produces accurate automotive double flares on most common sizes of brake pipe. • Cam-action body mounts in bench vice for ease of use. • Supplied with 4.75mm, 3/16", 1/4", 5/16" and 3/8" dies and 4.75mm, 3/16", 1/4", 5/16" clamp blocks for forming most popular flares. • Optional 3/8" clamp block Model No. available. SEA PFT07 • Supplied in carry-case.

On-Vehicle Brake Pipe Flaring Tool

• Produces accurate automotive SAE and DIN flares on common sizes of brake pipe. • Small body is suitable for on-vehicle applications. • Ideal for splicing in replacement sections of brake pipe for repair or after accident damage. • Use with ratchet and socket or standard spanner.

Model No. SEA VS820

Model No. SEA TP01

On-Vehicle Hydraulic Brake Pipe Flaring Tool

Model No. SEA PFT08

• Produces accurate automotive SAE and DIN flares on 3/16", 4.75mm, 5mm and 6mm brake pipes. • Ideal for splicing in replacement sections of brake pipe. • Powerful, lever operated hydraulic ram makes it suitable for steel pipes. • Features quick release chuck, twist lock die block housing for fast assembly and rotating hydraulic pipework to give easy access in confined spaces.

Model No. SEA PFT15

4-in-1 Automotive Deluxe Pipe Bender

• • • •

Twin handles provide even force for accurate pipe forming. Slender design allows pipes to be shaped in situ. Ideal for aluminium, brass, copper and steel pipe. Contoured vinyl grip handles provide extra comfort and control.

Brake Pipe Straightening Tool

Brake Pipe Bender

Model No. SEA VS0346

• Compact design for bending automotive brake pipes without crushing the pipe walls. • Rigid construction makes it suitable for steel pipes. • Will bend Ø3mm(1/8"), Ø4.75mm(3/16") and Ø6mm(1/4") pipe up to 90°.

Model No. SEA VS5055

3pc 1/2"Sq Drive Brake Caliper Socket Set

Brake Wind-Back Tool - Low Profile VAG

• Chrome Vanadium steel 1/2"Sq drive sockets. • Suitable for the adjustment and installation of Bendix and Girling brakes. • Supplied in case for Model ease of storage.

• Enables retraction of the piston on rear brake calipers. • Helps prevent damage to pistons and seals. • Special low profile design for VAG vehicles. Model No.

Rear Brake Piston Wind-Back Adaptor VAG

Triple Leg Cylinder Hone

5pc 1/2"Sq Drive Brake Caliper Socket Set

• Adaptor enables retraction of the piston on rear brake calipers when used in conjunction with a traditional wind-back tool with a two-pin adaptor mounting. • Applications: Model No’s. VS0211, VS0240, VS0243, VS028, VS0282, VS0285, VS0286, VS0287. Model No. • Three-pin design suitable SEA VS02821 for VAG vehicles.

• Flexible drive shaft and adjustable cutting control. • Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from Ø25 to 64mm. • Suitable for small and medium sized brake cylinders.

• Chrome Vanadium steel 1/2"Sq drive sockets. • Updated set contains pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes. • Socket Sizes: 10, 12.5, 14, 19mm. • Socket Bit Size: 10mm.

• Brake pipe straightener designed for use on automotive applications. • This unique design is fast and easy to use. • Suitable for 3/16"(4.76mm) cupro-nickel, copper and steel pipe. • Features hole for marker pen.

Model No. SEA VS5056

No. SEA VS0460

Model No. SEA VS023

Model No. SEA VS0464

4-in-1 Cylinder Hone Kit

21pc Brake Piston Wind-Back Tool Kit

• Suitable for push-back and wind-back brake pistons. • Includes left and right-handed thrust bolt assemblies, reaction plate, hex bits and adaptors and includes the three pin VAG adaptor. • Supplied in carry-case.

SEA VS0245

Model No. SEA VS0282

• Four cylinder-honing tools in one kit covering 18mm to 89mm cylinder bores. • Suitable for honing and de-glazing car brake and clutch cylinders plus motorcycle, outboard and lawnmower engine cylinders. • Adjustable honing pressure and flexible drive shaft. • Supplied in storage case.

Model No. SEA VS029

Brake Disc Run-Out Kit

0-50mm Brake Disc Caliper

• Check for ball joint wear and brake disc run-out quickly and easily. • Locking pliers secure to any convenient position, enabling DTI gauge to be placed against brake disc. • Kit includes Metric calibrated DTI gauge.

• Stainless steel caliper suitable for accurate measurement of brake disc thickness. • Floating jaw assembly enables easy removal of caliper from disc while retaining reading. • Metric scale with 0.1mm graduations. • Supplied in storage case.

Model No. SEA VS0290

Model No. SEA VS056

M9 x 1.25mm Thread Insert for VS0462 Pack of 10

Brake Spring Washer Pliers

Caliper Cleaning File

• Thread inserts for Model No. VS0462 Brake Caliper Thread Repair Kit.

• Designed to aid installation and removal of brake shoe retaining spring washers, found in drum brake assemblies. • Spring loaded, offset jaws enable easy access to spring washer located behind wheel hubs. Model No. • Suitable for cars and light SEA VS0362 commercial vehicles.

• Designed for removing corrosion, brake dust and road dirt from the brake pad carrier prior to fitting new pads. • Double-sided blade features medium and coarse grooves. • Length: 270mm.

0-45mm Brake Disc Caliper

150mm/6" Digital Brake Disc & Drum Caliper

2pc Brake Pipe Ratcheting Spanner Set

• For quick and accurate measurement of brake disc thickness. • Long body design, allows use on some vehicles without the need to remove the wheel. • Spring action plunger, allows quick operation. • Suitable for motorcycles, cars and commercial vehicles. • Metric scale with 1mm graduations.

• Measures disc thickness (external) and small drums (internal). • Hardened and tempered stainless steel gauge. • 11mm High figures in LCD display for ease of reading. • Zero setting control allows for comparative measurement. • Supplied with calibration certificate and storage case. Model No. • Range: 0-150mm(0-6"). • Battery: SR44 - 1.5V. SEA VS0566

• Manufactured from Chrome Vanadium steel with a fully polished satin finish. • Features 72-tooth ratchet with flexi-head for limited access applications and fixed head for initial loosening of the nut. • Ideal for most brake pipe fittings.

Model No. SEA VS0462R

Model No. SEA VS0571

Model No. SEA VS0391

Model No. SEA VS0356

Composite Hose Pinch Tool Small for Brake/Fuel Hoses

Composite Hose Pinch Tool Medium for Heater Hoses

• Smooth rounded jaw edges prevent damage to internal hose reinforcement. • Quick and simple - one handed use. • Made from durable glass reinforced nylon.

Model No. SEA VS030

Model No. SEA VS031

Refractometer Antifreeze/Battery Fluid/ Screenwash/AdBlue®

Refractometer Antifreeze/Battery Fluid/Screenwash

• Accurately measures the strength of battery fluid, screenwash, antifreeze and AdBlue® by measuring the refractive index of light passing through the mixture. • Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology), G13 and aqueous/urea content of AdBlue®. • Temperature corrected prism ensures accuracy. • Eyepiece with adjustable focus. Model No. • Simple calibration check using distilled water. SEA VS0052 • Supplied with pipette and storage case.

• Accurately measures the strength of battery fluid, screenwash and antifreeze by measuring the refractive index of light passing through the mixture. • Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology) and G13. • Temperature corrected prism ensures accuracy. Model No. • Eyepiece with adjustable focus. SEA VS005 • Supplied with pipette and storage case.

2pc Auto Lock 45° Hose Pinch Tool Set

Combustion Leak Detector

• Smooth rounded jaws prevent damage to internal hose reinforcement. • Auto locking mechanism for one handed operation. • 45° Angle jaw for use in restricted spaces. • Size/Maximum Jaw Opening: Small/29mm, Large/42mm. Model No.

• Diagnose blown gaskets, cracked blocks and cylinder heads on both petrol and diesel vehicles. • Checks for CO2 in cooling system and indicates its presence by test fluid colour change. • Use with cone adaptor or in conjunction with radiator caps from Model No’s VS001, VS0013, VS0014, VS0011, VS0033 and VS006. Model No. • For Test Fluid Refill order Model No. VS0061F. SEA VS0061

• Test for variations in high and low pressure sides of vehicle air conditioning systems. • Suitable for R134a and R12 applications. • Lightweight, aluminium block design with sight glass. • Easy-to-read large anti-flutter gauges. • Professional service couplers (colour-coded and labelled). • Three colour-coded charging hoses and a hanging hook Model No. to allow hands-free use. SEA VSAC002

Combustion Leak Detector

Radiator Coupler - Scania

Remote Action Hose Clip Tool

SEA VS0500

• Diagnose blown gaskets, cracked blocks and cylinder heads on both petrol and diesel vehicles. • Checks for CO2 in cooling system and indicates its presence by test fluid colour change. • Use with cone adaptor or in conjunction with radiator caps from Model No's VS001, VS0011, VS0013, VS0014, VS0033 and VS006. • For Test Fluid Refill order Model No. Model No. VS0061F.

• Radiator coupler for draining and filling coolant system fitted to Scania trucks and buses.

Model No. SEA CV014

SEA VS0062

2pc Hose Clip Pliers Set

• • • • •

• Long reach tool designed for awkwardly positioned tag-type hose clips. • Flexible cable and compact head help operation in confined spaces. • Features ratchet action and vinyl dipped handles for comfort and close control.

Model No. SEA VS1663

6pc Alternator Freewheel Pulley Removal Set

Heavy-duty construction with PVC dipped handles for added comfort and grip. Special ‘V’ slot and cross-slot jaws for installation and removal of tag and wire type hose clips. Pliers with ratchet locking mechanism for ease of use on lower radiator hoses. Swivel jaws allow use where access is confined. Length: 220mm. Model No.

Air Conditioning System Manifold with Sight Glass

SEA VS1665

• Easy removal of freewheel pulley from alternator either on or off the vehicle. • Allows alternator shaft to be held while the pulley retainer is removed. • Applications: Audi, BMW, Citroen, Ford, Mercedes, Peugeot, Porsche, Renault, Skoda, Vauxhall/Opel.

Model No. SEA SX400

Diagnostic Socket Memory Safe EOBD

18pc Alternator Freewheel Pulley Removal Set

• Attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicle’s own battery is disconnected. • Features LED to indicate back-up battery power supply status. • Saves valuable time spent re-programming lost codes.

• Enables easy removal of freewheel alternator pulley, either on or off the vehicle. • Allows alternator shaft to be held while the pulley retainer is removed. • Incorporates a complete range of combination TRX-Star*, spline and hex adaptors to fit most alternators.

4-Way Battery Post & Terminal Cleaner

• Removes heavy corrosion build-up on battery posts and terminals for improved electrical contact. • Features clamp reamer and terminal scrapers.

Battery Fluid Tester - Tube Type

Model No. SEA AK418

Model No. SEA AK500

Detects radio frequency and/or infrared emission from key fobs and remote controls. Diagnose faults quickly and easily without the need to dismantle the fob, remote or vehicle. Suitable for a wide variety of vehicle manufacturers. Model No. Detects new BMW frequencies. Powered by 9V battery (not included). SEA VS921

Model No. SEA AK120B

Printing Roll for BT2012.V2 - Pack of 2

• Compact device which accurately tests battery, cranking and alternator. • No heat, no sparks and no misdiagnosis. • Just key in the battery rating from the top of the battery and results are displayed on LCD screen. • Includes a facility to print results via PC. • No internal battery and will Model No. test batteries with a residual charge of just 8V. SEA BT105

IR & RF Key Fob Tester

• • • • •

Copper lug terminal tool Crimp range 10-120mm² BS Standard type terminal. Made from SCM40 hard tool steel.

Model No. SEA AK414

12V Digital Battery & Alternator Tester

Model No. SEA SX402

10-120mm² Copper Lug Terminal Crimping Tool

• • • •

• Professional battery hydrometer. • Float gauge and thermometer built-in.

12V Battery & Alternator Tester LCD Screen

• LCD display verifies the condition of battery and alternator output. • Suitable for 12V DC systems and connects to vehicle via the vehicle accessory power socket. • Fitted with 250mm cable and powered by connection to vehicle.

Model No. SEA VS2072

• Suitable for Model No. BT2012.V2 and other leading brands of battery tester.

Model No. SEA BT2012.V2-01

Digital Insulation Tester

• Specially designed for testing insulation on high voltage cables. • Supplied with test leads, batteries and carry-case. • Conforms to EN61010 CAT III (1000V).

Model No. SEA TA319

Professional Auto-Ranging Digital Multimeter

• Lightweight, auto-ranging digital multimeter with double moulded plastic housing and a 2000 counts LCD display. • Features forward facing work light, data hold and non-contact voltage detection. • Conforms to EN 61010-1 CATIII 1000V / CAT IV 600V safety standard.

• Lightweight, compact digital multimeter with double moulded plastic housing and a 4000 counts LCD display. • Drop-proof up to 2m. • IP65 rated as “dust tight” and protected against low pressure water jets (all directions). • Features display back light and forward facing work light. • Conforms to EN 61010-1 and EN 61010-2-033 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use.

Model No. SEA MM102

Model No. SEA MM104

8 Function Hi-Vis Digital Multimeter with Thermocouple

• Heavy-duty general purpose multimeter with clear and easy-to-read LCD display. • Features data hold function, temperature probe and diode test facility. • Housed in rugged rubber boot with integral stand. • Supplied with full set of leads and probes. • Measures: AC and DC Voltage, DC Current, Resistance, Temperature, Audible Continuity, Diode/Transistor Verification Mode.

Model No. SEA MM20HV

5-in-1 Digital Multimeter

• Five-in-one digital multi-tester has been designed to combine the functions of Sound Level Meter, Light Meter (Lux), Humidity Meter, Temperature Meter and Digital Multimeter. • Conforms to IEC-1010 and CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. • Features integral upright stand, auto and manual range selection, data hold, relative measurement, auto power off function, LCD display and back light. Model No. • Supplied with test probes SEA TM104 and thermocouple.

Automotive Wire Piercing Test Lead Probes 0-50V

• • • • • •

Fully insulated probes have a spring loaded clamp. Stainless steel pin self-centres and punctures the insulation. Fitted with Ø4mm banana style connectors. Maximum Wire Size: Ø3.5mm. Suitable for use with most multimeters and analysers. For automotive use only, with a maximum input of Model No. 50V DC. SEA TA114

• Designed for the automotive electrician and conforms to EN61010 CAT III 600V. • Ideal for measuring current draw from vehicle components in situ. • Features 10mm clamp. • Supplied in pouch.

Model No. SEA TA305

6-24V Auto Probe with 4.5m Cable

6/12/24V DC Long Probe Heavy-Duty Circuit Tester

• Fitted with 4.5m cable allowing access to the rear of the vehicle. • Just some of the tests, which can be done quickly and efficiently, on systems from 6V up to 24V: - Cooling fan motors - Fuel pumps - Window/Sunroof motors Model No. - Relays and Lamps SEA PP1 - Wiper motors

• Suitable for testing 6, 12 and 24V DC electric circuits. • 195mm Insulated probe, with pointed tip, tests through wire insulation. • Supplied with 3m coiled cable and insulated crocodile earth clamp.

0-30V Power Scope Automotive Probe

• Probably the most advanced automotive probe on the market, with a huge range of functions for effective automotive diagnostics, making short circuits and bad earths easy to find. • Features a scope function to visually test component signals, with the added benefit of maximum/minimum volts, frequency and duty cycle displayed. • Allows components to be activated in situ or prior to installation. • The fly lead allows continuity and polarity testing with a high-contrast colour LCD display giving a 7mm high read-out. • Features an audible continuity and positive/negative voltage indicator. • Two integral work lights. • 6m Lead connects to the battery supply and reaches to all areas of the vehicle. • Includes a vehicle accessory socket adaptor and 6m extension cable.

AC/DC Clamp Meter & Multimeter

Model No. SEA AK4005

50A Fuse Current Tester

Model No. SEA PP100

• The next level of simplicity in hand-held automotive current measuring tools. • Revolutionary new method now makes it possible to determine the amount of current in a fused circuit, without removing the fuse. • Troubleshoots parasitic drain problems and identifies active/inactive circuits via the fuse box. • Suitable for 6, 12 and 24V systems. • Powered by 3 x AA batteries (supplied).

Model No. SEA TA113

Jumper Test Lead Set - 5 Pairs x 450mm

100A Combined Battery Support Unit & Charger

• Five pairs of coloured cables. • Each cable has shrouded crocodile clips at each end. • Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.

• Professional combined battery support unit and charger designed to supply power for prolonged use during vehicle software updates or for showroom demonstration. • High frequency power supply utilises a microprocessing CPU controller when charging a battery and providing support during electronic diagnostic checks. • Up to 100A supply at 13.5V/14.5V & 14.8V • Designed for use with lead-acid batteries including WET, GEL and AGM types on 12V systems. • Includes a function to recharge a deeply discharged battery. • Safety circuitry which includes reverse polarity protection, Model No. short circuit protection, overload protection and the SEA BSCU100 detection of voltage errors.

Model No. SEA VS222

Ratchet Crimping Tool Insulated Terminals

Ratchet Crimping Tool without Jaws

• All steel construction with large comfort grip handles and plate stamped jaws. • Ratchet action ensures consistent crimping. • Terminal Suitability: 0.5-1mm², 1.5-2.5mm², 4-6mm².

• All steel construction with large soft grip handles. • Supplied without the required jaws which are sold separately, this allows selection of specific jaws for the large variety of crimping terminals used today.

Model No. SEA AK385

Model No. SEA AK3858

Insulated Terminal Crimping Jaws

Heat Shrink Butt Connector Crimping Jaws

Insulated Flag Terminal Crimping Jaws

• Quick change hardened and tempered jaws. • For use with Model No’s AK3857 & AK3858.

Model No. SEA AK3858/A

Closed End & Heat Shrink Crimping Jaws

• Quick change hardened and tempered jaws. • For use with Model No’s AK3857 & AK3858.

Model No. SEA AK3858/A5

Model No. SEA AK3858/A1

Model No. SEA AK3858/A4

Non-Insulated Terminal Crimping Jaws

Open Barrel Crimping Jaws

• Quick change hardened and tempered jaws. • For use with Model No’s AK3857 & AK3858.

Model No. SEA AK3858/B

Model No. SEA AK3858/C

Open Barrel Crimping Jaws

Open Barrel & D-Sub Crimping Jaws

Superseal Series 1.5 Crimping Jaws

• Quick change hardened and tempered jaws. • For use with Model No’s AK3857 & AK3858.

Model No. SEA AK3858/C1

Model No. SEA AK3858/H

Model No. SEA AK3858/H2

Superseal Series 1.5 Crimping Jaws

Delphi Weather Pack Crimping Jaws

• Quick change hardened and tempered jaws. • For use with Model No’s AK3857 & AK3858.

Model No. SEA AK3858/H3

Model No. SEA AK3858/H6

Storage Case for AK3857 & AK3858

Door Trim Clip Remover

• Tough and durable polyethylene carry-case, for storage of Model No. AK3857 or AK3858 ratchet crimping tool and jaws. • Allows additional storage of terminals for easy selection. • Features 25 compartments.

2pc Lightweight Front Seat Protector Set

• Set includes two reuseable front seat covers. • Manufactured from water resistant lightweight nylon. • Ideal for protecting the vehicle’s interior from dirt, grease and oil, as well as food and drink spills. • Suitable for most cars and light commercial vehicles. • Can be fitted to seats with or without airbags.

Model No. SEA CSC5

Model No. SEA AK3858/H7

Model No. SEA AK3858/CASE

Induction Block

• Suitable for the removal of door trim clips on most vehicles. • Features coated U-profile tip to reduce the risk of damage to surrounding trim and Model No. contoured textured comfort grip handle. SEA RT007

Induction Coil - Flex 920mm

• Induction block for Model No. VS230.

Model No. SEA VS2311

• Induction coil for Model No. VS230.

Model No. SEA VS2310

2000W Induction Heater

Mobile induction heater for fast heat delivery. Install appropriate coil and place over or around ferrous metal. Ideal for loosening stubborn and seized fixings. Supplied with special dent induction block for panel expansion and induction pad for plastic trim/sticker removal. • Induction element delivers high heat fast and effectively. • Contents: Direct Coil; Ø20, Ø30mm, Side Coil; Ø20, Ø30mm, Pad Coil; Ø55mm, Flex Coil; 740mm, Induction Block - 50 x 35 x 30mm. • Supplied in carry-case. • • • •

Model No. SEA VS230

Induction Coil - Direct Ø15mm

Induction Coil - Side Ø15mm

Induction Coil - Direct Ø20mm

• Induction coil for Model No. VS230.

Model No. SEA VS2301

Induction Coil - Side Ø20mm

• Induction coil for Model No. VS230.

Model No. SEA VS2302

Induction Coil - Direct Ø30mm

• Induction coil for Model No. VS230.

Model No. SEA VS2304

Model No. SEA VS2303

Induction Coil - Side Ø30mm

• Induction coil for Model No. VS230.

Model No. SEA VS2305

Model No. SEA VS2306

Induction Coil - Direct Ø32mm

Induction Coil - Side Ø32mm

Induction Coil - Pad Ø55mm

• Induction coil for Model No. VS230.

Model No. SEA VS2307

Model No. SEA VS2308

Model No. SEA VS2309

Trim Clip Removal Pliers

5pc Trim & Upholstery Tool Set

• Spring-loaded pliers for trim clip removal without trim damage. • Easy access into confined areas, such as bumper covers. • Length: 240mm.

• Tools designed to simplify trim and trim stud removal. • Manufactured from resilient plastic to minimise panel damage and marking.

Model No. SEA RT004

Model No. SEA RT/KIT

Windscreen Cutting Wire - Braided

Windscreen Cutting Wire - Square

7pc Windscreen Removal Tool Kit

• Braided stainless steel wire suitable for use with wire grips. • Use a sawing action to cut through the urethane bond. • Length: 22.5m.

• Becoming more popular than braided wire. • Stainless steel square profile has four cutting edges. • Fast and easy cutting of urethane bond even in cold conditions. • Length: 22.5m. Model No.

• Reinforced composite handles with heat treated chromed steel shafts. • A complete tool kit for the removal of bonded and rubbered screens. • Handles include hanging Model No. eye for storage.

Front Wheel Bearing Puller - Ford Transit

Lower Ball Joint Socket Peugeot 405/Citroen

2pc Lower Ball Joint Socket Set

• Engineered for safe, in situ removal of drive flange with wheel bearing/hub assembly and wheel bearing from drive flange. • Essential tool when replacing brake discs allowing the drive flange to be split from the hub assembly. Model No. • Features a cleverly designed SEA VS2386 impact force screw.

• Heat treated alloy steel socket. • 35mm Hex drive with Ø19mm internal clearance for OEM and non OEM fittings. • Ø50mm Ring with drive pegs which locate in slots cut in Model No. the ball joint flange.

• Set of two heat treated alloy steel sockets. • Suitable for removal of OEM and aftermarket lower ball joints. • Applications: Citroen; Xantia, C5, C6, Peugeot; 405, 406, 407, 605, 607. • Supplied in carry-case. Model No.

Universal Twin Camshaft Holding Tool

Diesel Engine Setting & Locking Kit VAG 1.4D, 1.6D, 2.0D Common Rail Belt Drive

Crankshaft Pulley Holder - Honda

• Designed to hold twin camshafts in their timed position by using sockets to locate onto the central camshaft fixings. • Tool will hold the camshafts in position when replacing the timing belt or chain. • Choice of adaptors gives a huge range of application Model No. coverage on many twin SEA VSE889 cam engines.

• Covers the new generation three- and four-cylinder common rail diesel engines. • Includes the tools required for setting the camshaft drive gears within the cylinder head.

• Used to counter-hold the crankshaft pulley when loosening/tightening the pulley bolt. • Short head design for use in confined spaces and on vehicles with a single crankshaft pulley. • For use with 1/2"Sq drive breaker bar. Model No. • Head Diameter: 50mm.

Model No. SEA WK0513

SEA WK0514

SEA SX027

Model No. SEA VSE2090

SEA WK3

SEA SX0271

SEA VSE5048S

Auxiliary Belt Tensioner Spanner Set BMW Mini N12/N14/N16/N18

Crankshaft Pulley Alignment Tool Ford B-Max 1.6 EcoBoost

Crankshaft Holding Tool - Peugeot/ Citroen/Toyota 1.0, 1.2 Petrol Engines

• Two piece spanner set covering both sizes of belt tensioner fitted to a wide range of BMW Mini engines. • Slimline design for access where space is limited. Model No. • Sturdy handle also has a SEA VSE6211 1/2"Sq drive if required.

• Crankshaft pulley alignment tool for Ford B-Max 1.6 EcoBoost engine. • Ensures the crankshaft pulley is correctly aligned with the timing belt cover.

• Designed to counter hold the crankshaft pulley to release and tighten the centre bolt. • Suitable for 1.0 and 1.2 Peugeot, Citroen and Toyota engines.

1/2"Sq Drive Crankshaft Rotator - MAN

Crankshaft Rotator for DAF 1/2"Sq Drive

Crankshaft Rotator - DAF

• Designed to rotate crankshaft on MAN commercial vehicles via flywheel ring gear.

• Designed to rotate crankshaft on DAF commercial vehicles via flywheel ring gear.

Model No. SEA CV005

Crankshaft Turning Socket Audi 2.5 5-Cylinder - Chain Drive

• Crankshaft turning socket for Audi 5-cylinder petrol engines.

Model No. SEA VSE5026

Model No. SEA VSE5860

Model No. SEA CV002

Crankshaft Turning Socket - VAG

• Specially designed socket for turning the crankshaft on a wide range of 6- and 8-cylinder VAG engines.

Model No. SEA VSE5058

Model No. SEA VSE5093

Model No. SEA CV026

Crankshaft Pulley Holding Wrench VAG 1.8/2.0 TFSi - Chain Drive

• Essential tool required to counter hold the crankshaft pulley whist removing/tightening the crankshaft pulley bolt.

Model No. SEA VSE6237

Setting/Locking Kit VAG 1.2, 1.4TFSi, 1.4, 1.6FSi Chain Drive

1/2"Sq Drive Crankshaft Turning Socket Subaru/Saab 2.0/2.5

High Pressure Fuel Pump Sprocket Remover - Hyundai/Kia 2.5 Diesel

• Timing kit suitable for 1.2, 1.4TFSi and 1.4, 1.6FSi engines. • Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Model No. • Supplied in storage case.

• Crankshaft turning socket fits over the end of the crankshaft to enable the engine to be turned with any 1/2"Sq drive breaker bar or ratchet wrench.

• Specialised puller essential for the removal of the high pressure fuel pump sprocket.

SEA VSE5950

Model No. SEA VSE5980

Model No. SEA VSE5932

Setting/Locking Kit - Audi 2.5 TFSi Chain Drive

Setting/Locking Kit - Range Rover 3.6D Chain Drive

• Suitable for Audi five cylinder 2.5 chain drive petrol engines. • Contains the essential tools required to set and lock the engine. • Includes a camshaft adjuster turning socket and a crankshaft turning socket. • Supplied in a storage case with instructions and a warning tag.

• Setting and Locking kit for Range Rover L320 and L322 V8 3.6D. • Kit includes a flywheel locking plate and camshaft rotating pin. • Supplied in a storage case.

Model No. SEA VSE5025

Model No. SEA VSE5010

Service Kit - Ford/Volvo 2.5 Belt Drive

Setting & Locking Kit - VAG 1.2, 1.4TFSi, 1.4, 1.6FSi

• Includes a camshaft holding tool which is essential for holding the camshaft when checking the valve clearances, and a crankshaft front oil seal installer.

• Timing kit suitable for 1.2, 1.4TFSi and 1.4, 1.6FSi engines. • Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. • Includes guide pins for aligning the supercharger. • Supplied in storage case with instructions and a warning tag.

Model No. SEA VSE7680

Model No. SEA VSE5988

Balance Shaft Locking Kit - Jaguar/Land Rover/Citroen/Ford 2.2D - Belt Drive

Timing Chain Tool Kit

• Contains the essential tools for setting and locking the balance shafts on 2.2 belt drive diesel engines fitted in Jaguar, Land Rover, Ford and Citroen vehicles.

• Timing chain splitting and fitting tool kit. • Enables timing chain replacement with the minimum of engine dismantling. • Suitable for Mercedes chain drive engines, and some Chrysler & Jeep applications. Model No. • The kit includes tools to split the chain and also the temporary SEA VSE4802 chain links required to fit the new chain.

Model No. SEA VSE3029

Setting & Locking Kit - Audi 4.2 V8 Chain Drive

Setting/Locking Kit - Mercedes 1.6/1.8 M271 Chain Drive

• Kit includes camshaft setting plates, camshaft positioning sensor alignment tools and crankshaft locking pin. • Supplied in a storage box with warning tag and comprehensive instructions. Model No.

• Includes timing chain tensioner wedge to release the oil pressure from the hydraulic timing chain tensioner. • A timing chain tensioner drift is provided to refit the blanking plug back into the crankcase after removing the chain tensioner. Model No. • A star bit is provided to remove the camshaft sprocket SEA VSE4816 fixing bolts.

SEA VSE7407

Setting/Locking Kit - BMW & Mini 1.5D, 1.6D, 2.0D, 3.0D Chain Drive

Setting/Locking Kit - BMW 1.2/1.6/2.0 Chain Drive

• Essential tools for timing the BMW, BMW Mini 1.5D, 2.0D and 3.0D chain drive diesel engines. • Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool, also suitable for the new generation of modular engines. • Kit also includes HP pump sprocket retaining tool required Model No. during pump removal/replacement applications on SEA VSE6121A N47/N57 engines.

• Fits the new generation of BMW modular petrol engines. • Contains the tools required to set and lock the engine and for valve timing checking and adjusting.

Setting/Locking Kit - Jaguar, Land Rover 5.0 Chain Drive

Setting/Locking Combination Kit Ford, PSA - Belt/Chain Drive

• Essential tools for setting and locking the engine during timing chain replacement. • Contains camshaft turning tools, a flywheel locking tool and a timing chain pre-tensioner tool. Model No. • Supplied in a carry-case with instructions and a warning tag.

• Suitable for a wide range of belt or chain driven petrol and diesel engines. • Contains a camshaft sprocket puller and flywheel locking tools. • Supplied in a storage case with instructions and a warning tag. Model

Setting/Locking Kit - Alfa Romeo, Fiat, GM, Saab 1.4, 1.6, 1.8 Twinport - Belt Drive

Setting/Locking Kit - VAG 1.4D, 1.6D, 2.0D Common Rail Belt Drive

• Comprises camshaft setting tools and belt tensioner locking pins. • Suitable for timing applications on all 1.4, 1.6 and 1.8 Twinport petrol engines with belt drive.

• Covers the new generation 3- and 4-cylinder common rail diesel engines. • Includes the tools required for setting the camshaft drive gears within the cylinder head.

SEA VSE3445

Model No. SEA VSE6122

No. SEA VSE5042A

Model No. SEA VSE5006

Model No. SEA VSE6281

Front Pivot Arm Bush Tool - Peugeot 407/508, Citroen C5/C6

Trailing Arm Bush Tool - Ford

• Suitable for the removal/installation of the front lower suspension pivot arm bush. • Can be used in situ without removing the aluminium hub carrier from the vehicle.

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford Fiesta MkVI. • Can be used in situ without removing the arm from the vehicle. • Also suitable for Mazda 2. Model

Model No. SEA VSE4785

No. SEA VSE4788

52pc Bearing Race & Seal Driver Set

Adjustable Press Support Plate

• Designed to be used with a standard workshop press. • Adjustable diameter and six interchangeable support legs provide quick alignment of hub or suspension frame for secure and level pressing. • Ideal when removing and installing wheel bearings and bushes. Model No. • Operating Diameter: 78-100mm. SEA VS7037

• Set of forty-nine square edged heavy-duty steel drivers. • Sizes: 18-65mm (1mm increments), 74mm. • Suitable for installation of bearings or seals without damaging the bearing, seal or housing. • Adaptors can also be used in a standard workshop press.

Model No. SEA VS7032

Trailing Arm Bush Tool Ford Mondeo Mk IV

Trailing Arm Bush Tool Volvo, Ford

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford vehicles. • Can be used in situ without removing the arm from the vehicle. • Also suitable for some Volvo vehicles that share the same Model No. Ford platform. SEA VSE4784 • Supplied in carry-case.

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford/Volvo vehicles. • Can be used in situ without removing the arm from the vehicle. Model No. • Supplied in carry-case. SEA VSE4786

Trailing Arm Bush Tool Vauxhall/Opel

Setting/Locking Kit Dacia, Mercedes, Renault, 1.5D Belt Drive

Vibration Damper Holding Tool VAG 1.8/2.0 - Chain Drive

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Vauxhall/Opel vehicles. • Can be used in situ without removing the arm from the vehicle. • Features a slotted adaptor for visual reference while in Model No. operation.

• Essential tools for timing belt replacement on Dacia, Mercedes and Renault 1.5D dCi diesel engines. • Supplied with a warning tag and instructions.

• Contains the essential tools required to maintain engine timing if the vibration damper has to be removed. • Supplied in a storage case with full instructions.

Universal Press Support Block

Wheel Bearing Circlip Pliers - PSA

Water Pump Reaction Wrench - VAG

• Designed to be used with a standard workshop press. • Multiple threaded holes in aluminium base plate enable the support bars to be installed in virtually any position, allowing the bearing or bush to be positioned horizontally. Model No. • Includes a packing block for SEA VS7036 added versatility.

• Features specially designed tips for eyeless circlips, spring loaded jaws and vinyl dipped handles. • Applications: Citroen C1; 1.0 Petrol, 1.4Hdi (05-15), Peugeot 107; 1.0 Petrol, 1.4Hdi (05-15), Renault Clio; Mk2 2.0 16V Model No. Sport (98-05), Toyota Aygo; SEA VS7040 1.0 Petrol, 1.4Hdi (05-15).

• Water pump reaction wrench suitable for VAG vehicles with three bolt water pump pulleys. • Holds the pulley to assist with the removal of the fixing bolts. • Handle includes 1/2"Sq drive to enable an extension to be Model No. fitted if required.

SEA VSE4787

Model No. SEA VSE4810

Model No. SEA VSE4251

SEA VSE4977

Hydraulic Coil Spring Compressing Station with Gauge 2000kg Capacity

Hydraulic Coil Spring Compressor 1000kg Capacity

• Hydraulic hand pump unit powers 1tonne capacity ram and yoke assembly. • Up to 50% quicker than using other ratchet driven spring compressors. • Equipped with two pairs of spring yokes with plasticized covers to prevent slippage and damage to springs. • Suitable for springs from 80mm ID to 165mm OD.

Model No. SEA VS7011

• Foot operated hydraulic unit, with gauge showing force applied to the spring under compression. • Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications. • Fitted with plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer’s warranty. • Suitable for springs from Model No. Ø87mm to Ø202mm.

Air/Hydraulic Coil Spring Compressing Station 1500kg Capacity

Coil Spring Compressor Air Operated 1000kg Capacity

• 1500kg Capacity air actuated hydraulic unit with alternative foot operation. • Quicker and easier than using ratchet driven spring compressor. • Plastic coated yokes reduce the risk of spring slippage/damage. • Suitable for springs from Ø80mm to Ø175mm.

• Fast and safe compression of road springs. • 1000kg Air operated unit with safety locking guard. • Supplied with two interchangeable plastic coated lower yokes and a suspensionstrut clamp. • Fits a wide range of spring configurations and diameters. • Also features a strut locating platform for easy movement of the suspension strut to avoid unnecessary lifting.

Model No. SEA RE232

SEA RE2311

Model No. SEA RE300

2pc Long Reach Coil Spring Compressor

Hub Cleaner

2pc 1/2"Sq Drive Strut Leg Pry Socket Set

• Carbon steel, hardened lead screws and cast jaws. • Wrap over coil jaws for extra safety. • Long reach jaws are ideal for the longer type of coil spring found on modern vehicles. • Maximum Capacity Per Pair: 1000kg. Model No.

• Removes surface dirt and corrosion on hubs that use wheel bolts. • Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. • Use with 1/2"Sq drive.

• Reduces risk of damage to hub casting. • Includes two sizes of pry socket: 7 x 5mm and 8.2 x 5.5mm. • Suitable for removal and installation of strut legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW.

SEA AK3846

14pc Stud Hub Cleaner

• • • • •

Removes surface dirt and corrosion on hubs fitted with studs. Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. Cleaning discs fit over wheel studs. Use with power drill or air impact wrench. Model No. Supplied with 1/2"Sq drive adaptor. SEA VS8002

Model No. SEA VS8001

Model No. SEA SX034

CVJ Boot Tool - Air

• Innovative tool saves time, money and frustration. • Installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft. • No effort and no mess! • Save on labour time by up to 70% and prevent damage to CV joint. • Composite body with simple control valve, works from standard workshop air supply. • While fitting boot the tool can be removed from the air line when pressurized (arms open) and will maintain pressure until Model No. the release button is pressed. SEA BSL103 • Suitable for cars and light commercial vans.

8pc Strut Nut Set

1/2"Sq Drive Alloy Wheel Impact Socket Star Profile for Mercedes

80mm 3/4"Sq Drive Front Hub Nut Socket Scania

• Castellated Sockets: Drives; 15, 21, 22mm, Sizes (Internal Ø/Tooth Width); 10.5 x 3.5, 12.5 x 3, 12.5 x 3.5, 14 x 2.5, 14 x 5, 14.5 x 5mm. • Ovals: 1/2"Sq Drive, Sizes Model No. (Internal Ø/Tooth Width): SEA SX0331 7 x 5, 8.2 x 5.5mm.

• Star profile wheel nut socket which is now used on some Mercedes vehicles. • Manufactured from Chrome Molybdenum with protective Model No. sleeve. SEA SX0417 • Size: 17mm.

• Drop-forged, 8-point, steel impact socket designed for the removal of front hub nut found on Scania trucks.

1"Sq Drive 85mm Impact Socket Commercial

M12 x 800mm 1/2"Sq Drive Extra-Long Spline Socket Bit

22pc Locking Wheel Nut Key Set - Audi

• Chrome Molybdenum, drop-forged, 6-point impact socket. • Phosphate finish for greater corrosion resistance. • Ideal for use with air impact wrenches.

Model No. SEA CV085

• Save valuable time and loosen drive shaft screws from the outside. • Suitable for VAG vehicles. • Hardened and tempered Chrome Vanadium steel socket. • Chrome plated with satin finish. • Knurled ring on socket to assist gripping with oily fingers. Model No. • S2 Steel spline bit extension SEA AK5537 with phosphate coating.

22pc Locking Wheel Nut Key Set BMW

Model No. SEA CV001

• Set of twenty locking keys for the removal of locking wheel nuts on Audi vehicles. • Adaptor can be used with either a 1/2"Sq drive or 21mm socket. • Set includes drift to aid Model No. removal of key from adaptor. SEA SX206

10pc Locking Wheel Nut Key Set BMW & Mini

• Set of twenty locking keys for the removal of locking wheel nuts on BMW vehicles. • Adaptor can be used with either a 1/2"Sq drive or 21mm socket. • Set includes drift to aid removal of key from adaptor.

Model No. SEA SX207

21pc Locking Wheel Nut Key Set BMW & Mini

• Set of twenty keys for the removal of security spline and ribe locking wheel nuts on BMW and Mini. • Includes 17mm wheel nut socket with 1/2"Sq drive.

• Set of ten locking keys for the removal of security splined locking wheel nuts on BMW and Mini.

Model No. SEA SX208

23pc Locking Wheel Nut Key Set VAG

Model No. SEA SX209

• Set of twenty-two keys for the removal of spline and security ribe locking wheel nuts on VAG vehicles. • Includes 17mm wheel nut socket with 1/2"Sq drive.

Model No. SEA SX210

Steering Rack Knuckle Tool

• Suitable for the fast and easy removal of the steering knuckle. • Fits racks with hex drive, two flats and round ends. • Ideal for vehicles with limited access and avoids the need to remove the rack assembly. • Suitable for steering rack Model No. knuckles with a diameter SEA VS4000 of 33 to 41mm.

Wheel & Tyre Handling Dolly 127kg Capacity

Wheel Bolt Thread Restorer Kit Commercial

• Contains four common wheel bolt thread sizes. • Suitable for cleaning and repairing damaged threads saving time and money. • Use with a 32mm socket or spanner. • Thread sizes: M18 x 1.5mm, M20 x 1.5mm, M22 x 1.5mm, Model No. 7/8" x 11 BSF. SEA CV203 • Supplied in storage case.

Heavy-Duty 4-Way Wheel Brace

• Lever bar length: 506mm. • Longer than most other wheel braces on the market, allowing extra force to be applied. • Manufactured from carbon steel with chrome finish. • Features three popular sizes of wheel nut sockets, and 1/2"Sq drive adaptor for standard sockets. • Socket Sizes: 17, 19, 21mm.

Model No. SEA AK2096

Single Barrel Foot Pump

Tyre Inflator with Clip-On Connector

• Steel framed foot pump with Ø50 x 120mm steel barrel. • Dial type pressure gauge with rotating bezel. • Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar. • Fitted with 610mm of flexible pressure hose with clip-on type connector. • Supplied with accessory for inflating items such as small Model No. inflatable boats, air beds SEA S0540 and balls.

• • • • •

Tyre Inflator with 2.75m Hose & Clip-On Connector

Professional Digital Tyre Inflator with Twin Push-On Connector

Tyre Pressure Gauge with Clip-On Connector

• Heavy-duty extruded aluminium body and zinc head. • Linear pressure scale, dual calibrated in psi and bar. • 2.75m Hose for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres. Model No. • Range: 0-9.5bar(0-140psi).

• Die cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. • Auto power off after eight seconds and auto power on once pressure is sensed, or air inflation starts. • 350mm Flexible hose fitted with 240mm, twin push-on, Model No. air connector. SEA SA397

• Robust gauge with protective rubber bumper. • Supplied with clip-on connector. • Scale: 0-7bar/0-100psi.

• For commercial sized wheel and tyre removal/installation. • Fork Centres: 535mm.

Model No. SEA TH002

SEA SA396

Heavy-duty extruded aluminium body and zinc head. Linear pressure scale, dual calibrated in psi and bar. 350mm Rubber hose with steel protection sleeve. Range: 0-9.5bar(0-140psi). Fitted with clip-on connector.

Model No. SEA SA395

Model No. SEA TST/PG6

Digital Tyre Pressure & Tread Depth Gauge

Torque Limited Tyre Valve Tool

Dual Wheel Separator

• Tyre pressure gauge with integral tread depth gauge and work light. • Push-button operation with backlit LED display for tyre pressure. • Read-out available in bar, psi, kg/cm² or kPa. • Integral tread depth gauge reads up to 20mm. • Auto power-off.

• Pocket size tool specifically designed to prevent over tightening of valve cores fitted to wheels/tyres with TPMS. • Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs. • Preset Torque Value: 0.45Nm(4lb.in).

• Designed to remove stubborn steel wheels on commercial vehicles. • Applicable for twin and single wheel set up. • Blackened finish for added corrosion resistance. • Suitable for use with air/electric impact guns. • Supplied in storage case.

Model No. SEA TSTPG11

Sump plug m17

Model No. SEA TST18

Sump plug m15

Model No. SEA VS660.06

Tap m15

Sump plug m20

Model No. SEA VS660.07

Adaptor 3/16"

Model No. SEA VS660.03

Model No. SEA CV500

Model No. SEA VS660.05

Adaptor 1/4"

Model No. SEA AK506.V2-03

Model No. SEA AK506.V2-04

7.6ltr Oil/Fluid Drain Pan

Ø160mm Flexible Spout Valved Funnel

• Made from high density Polyethylene with UV stabilisers. • Features anti-splash lip that contains fluid when carrying or pouring. • Large handles and enclosed pouring spout aid return of oil/fluid to recycling container.

Model No. SEA DRP02

17ltr Antifreeze/Fluid Drain Pan

• Heavy-duty polyethylene funnel resistant to oil, fuel and some acids. • Features lockable valve nozzle and integral wire mesh filter to keep contaminants out. • Supplied with detachable flexible hose with end cap. • Fitted with handle for safe and easy pouring.

Model No. SEA VFF1

Oil Funnel

• Made from high density Polyethylene with UV stabiliser. • Suitable for antifreeze changes. • Features anti-splash lip that contains fluid when carrying or pouring. • Large handles and enclosed pouring spout aids return of oil/fluid to recycling container. • Colour-coded to help keep different fluids isolated and reduces cross contamination. Model No. • Approximate Diameter: 460mm. SEA DRP04 • Height: 150mm.

9ltr Low Profile Drip Tray

• Square design and tapered spout fits into most engine filling holes. • Manufactured from durable polypropylene material. • Rectangular aperture (180 x 100 x 145mm) to accommodate up-ended containers.

Model No. SEA OIL1F

3pc Fixed Spout Funnel Set

• Low profile drip tray is manufactured from hard-wearing recycled polypropylene. • These have a broad appeal to both the classic car user and general mechanic. • Purpose-made for the recovery of oil and fluids, this drip tray can be left under most vehicles due to the low profile design. Model No. • Ideal for use over prolonged periods of time, catching any SEA DRPL09 drips that may occur whilst in storage or in the workshop.

• Polyethylene funnel set suitable for many fluids including detergents, pesticides, diesel and petrol. • Contains Ø75mm, Ø150mm and Ø250mm funnels with hanging tabs. • Not suitable for acetone, gun wash or thinners.

Metal Drain Pans

5ltr Measuring Jug with Flexible Spout

Model No. SEA F98

• Transparent measuring jug with removable flexible spout. Wide base for extra stability.

Model No. SEA VS563

180ml Oil Can

• Zinc plated pans, ideal for oil changes, cleaning and storing vehicle components. • May also be used as a drip tray under vehicles.

Model No.

Capacity

Size (W x D x H)

SEA DRPM1

9ltr

432 x 331 x 89mm

SEA DRPM2

12ltr

489 x 371 x 91mm

SEA DRPM3

16ltr

432 x 331 x 143mm

SEA DRPM4

20ltr

489 x 371 x 153mm

• Metal can with flexible spout for directional control. • Trigger operated action for high pressure oil spray. • Capacity: 180ml.

Model No. SEA TP04

Ø22mm x 3.14m Syphon Pump

• • • •

6.5ltr Manual Vacuum Oil & Fluid Extractor

5.5ltr Manual Vacuum Oil & Fluid Extractor

Long reach syphon for efficient transfer of fluids. Suitable for low viscosity oils and non-aggressive chemicals. Ø22mm hose for increased flow rate. Model Length: 3.14m.

No. SEA VS565

1ltr Multipurpose Mini Pump

• Multipurpose pump perfect for topping up difficult to access points on motor vehicles, lawnmowers, chainsaws and other jobs around the workshop and home. • Capacity: 1ltr. • Suitable for all engine oils, transmission fluids, brake fluids and general purpose cleaners.

Model No. SEA TP6804

• Ingenious vacuum device. • Ideal for other liquids such as water and soluble oil. • Supplied with Ø5.8 and Ø6.7mm sprung steel lined suction probes and a Ø9.8 x 1m extension tube. • Probes can be stored in the holder when not in use. • To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit. • Sets up a permanent fluid transfer while you do something else. • Internal float valve for automatic cut off when unit has reached maximum capacity. • Avoids searching for drain plug keys and getting under the vehicle. • Unit can be tipped Model No. 90° for easier SEA TP69 emptying.

3/4"BSP Zinc Die-Cast Lockable Drum Tap

3-Way Fill Pistol Type Grease Gun

• Zinc die-cast, push-pull tap. • Locking facility to prevent unauthorised access. • Nitrile seals, suitable for most liquids normally stored in plastic and steel drums. • 3/4"BSP Thread.

• • • • • • •

Model No. SEA TP128

Deluxe 36" American Style Creeper with 6 Wheels

• • • • •

Heavy-duty steel. Powder coat paint finish. Ø60mm Composite castors with ball bearing swivels. Vinyl covered back and headrest. Size (L x W x H): Model No. 920 x 430 x 95mm.

SEA SCR75

Pistol style gun with contoured pump handle. Die-cast pump head with air-bleed valve. 3-Way fill with cartridge, bulk or manual capability. Rigid delivery tube and push-on hydraulic four-jaw coupling. Accepts standard 400g cartridges. Delivery per Stroke: 1.25cm³. Optional 300mm Flexible Model No. Delivery Tube - Model No. SEA AK446 GGH300.

Composite Creeper with 6 Wheels

• • • • • •

One piece, moulded high impact polymer creeper. Two integral tool trays. Padded headrest. Low profile. Six Ø75mm swivel castors. Model No. Size (L x W x H): 1000 x 480 x 115mm. SEA SCR80

5.5ltr Capacity. Ingenious vacuum device. Ideal for other liquids such as water. To remove oil from a car engine, simply push the probe down the dip-stick tube and pump the handle on the top of the unit. • Allows other work to be undertaken whilst suction removes fluid. • Avoids searching for drain plug keys Model No. and getting under SEA TP696 the vehicle. • • • •

Needle Nose Grease Dispenser

• For use with all brands of manual grease gun (not for use with power greasers). • Dispenses a fine bead of grease. • Long nozzle provides access for hard to reach areas. • Ideal for lubricating constant velocity joints.

Model No. SEA AK447

Composite Creeper with 4 Wheels

• • • • •

One piece, moulded high impact polymer creeper. Padded headrest. Low profile. Four Ø50mm swivel castors. Size (L x W x H): Model No. 915 x 410 x 95mm.

SEA SCR80S

1.5tonne Heavy-Duty Scissor Jack

• Min./Max. Height: 100/375mm. • Fine rolled threading and precision made thrust bearing for long life and smooth operation.

Model No. SEA 58M

50mm x 3m Steel Wheel Car Transporter Ratchet Tie Down 4500kg Load Test

Tow Pole with Shock Spring 2000kg Rolling Load Capacity

• Manufactured from polyester webbing with stitched reinforcement around hooks. • Suitable for securing cars on transporters using wheel strap, which slides on to the main tie down. • Features wheel chocker with ‘O’ ring for use with steel wheels. • A double-locking, short narrow handle ratchet ensures there is no risk of disengagement or tension loss until the handle is released. • Load Test: 4500kg. Model No. • Webbing Length: 3m. SEA TDRWS • Cross Strap Length: 320mm.

• Rolling Load Capacity: 2000kg. • Spring loaded damper unit. • Locking tow hook feature ensures secure attachment to vehicle. • Suitable for mixed towing hook configurations, i.e. not both horizontal or vertical. • Supplied in pouch.

3tonne Professional Trolley Jack

Min./Max. Saddle Height: 140/525mm. Chassis Length: 655mm. Integral cog-type release mechanism with two-piece handle. Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safety overload valve and ‘pump-through’ valve to prevent handle locking once at maximum lift height. • • • •

Model No. SEA TPK2522

3tonne Standard Chassis Trolley Jack with Axle Stands (Pair)

Jack Min./Max. Saddle Height: 133/515mm. Single-piece hydraulic unit with heavy chassis design. Integral American cog-type release mechanism and long two-piece handle. Heavy-duty castors and large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. • Ideal for loaded vans up to 3.5tonne GVW. • Supplied with Ratchet Type Axle Stands, Model No. 3tonne (3000kg) capacity per stand (6tonne (6000kg) per pair). SEA 3010CX • Axle Stand Min./Max. Working Height: 285/420mm. • • • • •

Model No. SEA 3000CXD

Engine Support Beam 300kg Capacity

• • • •

Min./Max. Width: 585/1580mm. Supports and accurately positions engine. Ideal for replacing anti-vibration mountings. Aids the removal of gearboxes and transmissions.

Model No. SEA ES300

Jacking Beams with 1.6m Extending Arms & Flat Roller Supports or • • • • • • • •

Fully certified and approved to comply with MOT requirements. 1.6m Load arm reach. Beam Lift: 95-300mm. Two-stage mechanical safety lock and telescopic finger guards. Spring loaded flat arms with roller bearings. Optional hook arms supplied. Supplied with two pairs of aluminium support blocks. Wide lift configuration meets MOT recommendation for lifting on jacking point.

Model No.

Capacity

SEA SJBEX200

2Tonne

SEA SJBEX300

3Tonne

1/2"Sq Drive Air Impact Wrench Twin Hammer

• Maximum Torque: 480lb.ft(653Nm). • Breakaway Torque: 500lb.ft(680Nm). • Powerful impact wrench with twin hammer mechanism for increased torque. • Air motor features quality bearings, ductile steel end plates and carefully finished components to ensure smooth running and maximum power. • Combination forward/reverse and speed selector. • Suitable for heavy tyre Model No. shop use.

SEA SA602

4pc Air Tool Kit with Accessories

4pc Smart Eraser Air Tool Kit

• Medium Stroke Air Hammer, Air Die Grinder, 1/2"Sq Drive Air Impact Wrench and 1/2"Sq Drive Air Ratchet Wrench. • Includes; WallDrive® Sockets, Extension Bar, Grinding Points, Chisels and Accessories. • Suitable for workshop and bodyshop applications. Model No. • Supplied in carry-case.

• Complete kit for a variety of body preparation tasks. • Includes pinstripe removing pad, abrasive wheel and two wire wheels. • Air tool features two handles for maximum control during use. • All pads/wheels available Model No. separately.

SEA SA2004KIT

50ltr Workshop Parts Cleaning Tank

75ltr Shot Blaster with Water Trap & Wheels

• One-piece heavy-duty steel tank. • Fully sealed electric motor with magnetic drive pump unit. • Flexible metal nozzle directs solvent over work. • Lid features self-latching fusible link which automatically snaps lid shut in the event of a fire. • Supplied with removable shelf, small parts basket and workshop stand with integral storage shelf.

• Pressurised tank for maximum power. • Supplied with 2.4m rubber hose, five ceramic nozzles and in-line water trap for moisture-free grit blasting. • Also includes bayonet air line coupling and airflow regulator. • Accepts a variety of grits up to 700microns and is suitable for stripping rust and paint from wheels, chassis, panels and other corroded/painted surfaces.

Model No. SEA SM19

20tonne Floor Type Hydraulic Press

Table Aperture: 100mm. Working Table Width: 630mm. Ram Stroke: 185mm. Overall Height: 1796mm. Detachable pump and ram allowing hydraulics to be used for other purposes when press is not in use. • Supplied with gauge. • • • • •

Model No. SEA YK20F

Model No. SEA SB998

30tonne Floor Type Hydraulic Press

Table Aperture: 164mm. Working Table Width: 695mm. Ram Stroke: 150mm. Steel frame construction. 2-Speed hydraulic pump unit. Sliding hydraulic ram assembly giving 200mm of lateral travel for off-centre pressing applications. • Fitted with ram pressure gauge. • Supplied with flat pressing plate/V-blocks. • • • • • •

Model No. SEA YK30F

SEA SA695

360° 10 SMD LED + 3W LED Lithium-ion Rechargeable Inspection Lamp

360° 8 SMD LED + 1W LED Lithium-ion Rechargeable Inspection Lamp

• Unique and innovative 360° swivel and tilt function. • Each lamp houses 10 super bright SMD LEDs providing up to 400 lumens output with 120° spread of light. • Includes an additional high power 3W LED in the end for use as a directional torch. • Features two swivel hooks and three rubber covered magnets. • High quality 2.2Ah Lithium-ion battery for longer life. • Operating Time Side(High/Low)/Top: (3/6)/8hr. • Charging Model No. Time: 3.5hr.

• Unique and innovative 360° swivel and tilt function. • Eight super bright SMD LEDs providing up to 300 lumens output with 120° spread of light. • 1W High power LED directional torch. • 360° swivel hook on the rear and a rubber coated magnet on the base. • High quality 2.2Ah Lithium-ion battery. • Micro USB charging port. • Operating Time Side(High/Low)/Top: (3.5/8)/10hr. • Charging Model No. Time: 3.5hr.

SEA LED360

SEA LED3605RA

360° 3W COB + 1W LED Rechargeable Lithium-Polymer Inspection Lamp

• Mini, lightweight lamp with unique and innovative 360° swivel and tilt function. • 3W COB LED producing up to 300 lumens with a CRI-80 rating. • Even and constant spread of light. • 1W High power LED directional torch. • Base magnet and swivel hook for hands-free operation. • Rechargeable 3.7V 1.5Ah Li-Polymer battery. • Operating Time (Side/Top): 3/6hr. • Micro USB charging port. • Supplied with USB cable.

Rechargeable Ultraviolet Leak Detection Torch

• Ideal for detecting leaks in air conditioning and cooling systems with the use of fluorescent dye (not included). • Illumination can be adjusted from spotlight to wide area, by simple push/pull action of the head. • Features lightweight aluminium housing. • Battery charged via USB lead (supplied).

Model No. SEA LED3601R

Model No. SEA VS6021

Interchangeable COB LED Inspection Lamp & Torch

Plastic Riveting Kit

Rivet & Threaded Nut Rivet Kit

• Innovative two in one work light. • Quick release function enables user to change between 250 lumen torch with sliding focus, and a slimline 350 lumen COB inspection lamp with 180° tilt function, which features an additional LED directional torch. • Features a power indicator on the switch and a magnet on the base for hands free operation. Model No. • Supplied in a presentation SEA LED0121B box.

• Suitable for applying plastic rivets found in automotive applications. • Designed for one-handed operation and one-stroke setting. • Allows access in hard-to-reach areas not accessible by conventional lever type tools. • Universal nose piece suitable for all sizes of plastic rivets. • Rivets: 10pc x Ø6.6 x 17.2mm, 10pc x Ø6.3 x 25.2mm, Model No. 10pc x Ø5 x 15.8mm, SEA RT001 10pc x Ø5 x 17.2mm.

• Drop-forged frame with patented folding mechanism for compact storage. • Comfortable cushion grips. • Heavy-duty head suitable for fixing blind rivets and threaded nut rivets to thin sheet material. • Suitable for aluminium, steel and stainless steel.

Upholstery/Body Cleaning Gun

10tonne Straightener Kit with Variable Tilt

• • • •

Model No. SEA AK39602

Fully interchangeable parts and hydraulics. Variable position upright allows six preset angles of pull plus a seventh upright position. Supplied as standard with SuperSnap® manual hydraulic pump and ram. Supplied with Pull Clamp (x2), Sill Clamp (x2), Chain (x2), Chain Hook (x2), Carriage Anchorage Tube, Tube Stand (x2).

• Designed for the car dealer and professional valeter, this must have tool cleans hard to reach areas such as seat runners, door trims, dashboards, upholstery and bodywork. • Tornado action lifts dirt out of upholstery.

Model No. SEA BS101

Model No. SEA DZRE92/C

12"(300mm) Broom Soft Bristle

36pc Letter & Number Punch Sets

20pc Screw Pitch Gauge Set - Metric

• Soft bristle broom. • Fitted with handle support bracket. • Ideal for indoor or outdoor use.

• High carbon steel punches. • Hardened, tempered and chemically blackened. • Full set of alpha-numeric characters including the ampersand symbol (number 6 doubles as number 9). • Supplied in composite case.

Model No. SEA BM12S

Model No.

Length

SEA AK8297

66mm

8mm

SEA AK8298

73mm

10mm

• Folding 20 blade set, individually stamped with accurate thread profiles. • Range: 0.4-6mm.

Character Height

Model No. SEA AK71SPG

3pc Miniature Brush Set

3pc Auto Engineer’s Wire Brush Set

3pc Miniature Wire Brush Set

• Composite stocked brush set with hanging holes. • Steel, nylon and brass filled heads. • Suitable for cleaning spark plugs and smaller engineering components.

• Composite handles with hanging holes. • Small and medium (35 and 90mm headed) brass filled brushes for components such as glow/spark plugs and contacts and a large steel filled brush (90mm head) for removal of rust and welding slag.

• Composite stocked brush set with contoured soft grip handles. • Stainless steel, nylon and brass filled heads suitable for cleaning spark plugs and smaller engineering components. • Includes hanging hole.

Model No. SEA AK9791

Model No. SEA AK9801

Model No. SEA WB100

Ø65mm Twist Knot Wire Cup Brush M14 x 2mm

Ø75mm Magnifying Glass

150mm Heavy-Duty Professional Cast Iron Fixed Base Vice

• Suitable for use with power tools up to the maximum rated rpm. • Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.

• Lightweight composite handle housing a glass lens with x5 magnification. • Ideal for enlarging small work areas for detailed inspection. • Includes hanging hole for storage.

• • • • •

Model No. SEA TKCB651

Model No. SEA AK9647

Super quality cast iron construction. Replaceable steel jaws. Features an anvil. 2 Year guarantee against breakage. Jaw Opening: 150mm.

Model No. SEA CV150XT

150mm(6") Vernier Caliper

200mm(8") (0.02mm-1/1000"Acc) Vernier Caliper

• Traditional pattern stainless steel vernier with exterior/interior measurement and depth gauge. • Dual locking carriage with micro-thumb adjustment. • Accurate to 0.02mm or 1/1000". • Supplied in storage case.

• • • •

High quality, hardened and tempered stainless steel caliper. Dual locking carriage with micro-thumb adjustment. Accurate to 0.02mm or 1/1000". Supplied in storage case.

300mm(12") (0.02mm-1/1000"Acc) Vernier Caliper

• • • •

High quality, hardened and tempered stainless steel caliper. Dual locking carriage with micro-thumb adjustment. Accurate to 0.02mm or 1/1000". Supplied in storage case.

Model No. SEA AK9622

Model No. SEA AK962

Model No. SEA AK9623

200mm Double End Engineer’s Scriber

150mm Carbide Tipped Scriber

Heavy-Duty Magnetic Stand without Indicator

• Precision manufactured tool with hardened steel tips. • Features straight and 90° tips with knurled body.

• Fitted with pocket clip. • Suitable for use on glass, metals and ceramics. • Ideal for machinists, welders, tinsmiths and hobbyists.

• Precision ground base with rotary magnetic control. • Articulated arm with rotary lock. • Combination dial and scribing clamp with fine adjustment control.

Model No. SEA AK9752

Model No. SEA AK9751

Model No. SEA AK960

3pc Micrometer Set - Metric

4pc Measuring Tool Set

200mm Tap Wrench

• Set includes 3 external micrometers ranging from 0-75mm. • Supplied with extension sets and adjusting wrench.

• Four of the most commonly used precision engineering measuring/checking devices. • Contents: 200mm Vernier Caliper, 0-25mm Micrometer, 100 x 70mm Bevelled Edge Square, 150mm(6") Stainless Steel Rule.

• Professional style steel tap wrench with sliding jaws. • Suitable for tap sizes between M3 and M12.

Model No. SEA AK9651M

Model No. SEA AK91SET

Model No. SEA AK727

3pc T-Handle Tap Wrench Set

40pc Tap & Die Set - Split Dies Metric

• General purpose tap wrenches for tapping and reaming. • Solid jaw design and heavy knurled cap. • Supplied in pouch.

Model No. SEA AK9799

• High carbon steel taps and dies. • Dies with machined lead-ins for ease of use. • Set includes one long handled adjustable tap wrench with professional type sliding jaw. • Steel die-holder with retention screw, suitable for dies from M3 up to M12. Model No. • Also includes T-Bar type tap wrench, screwdriver and thread gauge. SEA AK301

45pc Tap & Die Set Split Dies Metric

76pc Tap & Die Set Split Dies Metric

• Ideal for the engineer and farmer. • Complete range of metric Tungsten taps and dies, 6mm up to 24mm. • Includes Tap Wrench, T-Bar Tap Wrench and Steel Die Wrench.

• Split dies with machined lead-ins for ease of use. • Die holder features self-centring mechanism for straight and accurate thread cutting. • Contents: Taps & Dies; Coarse - 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1, 8 x 1.25, 10 x 1.5, 12 x 1.75mm, Fine - 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1, 10 x 1.25, 12 x 1.25mm, Taper & Plug Tap & Die; 1/8"BSP, HSS Drill Bits; 1.7, 2.5, 2.6, 2.9, 3.3, 3.5, 3.8, 4.2, 4.5, 5, 5.3, 6.8, 7, 8.5, 8.8, Model No. 10.3, 10.7mm, Tap Wrench, T-Bar Tap Wrench, Die Holder, SEA AK3076 Thread Gauge, Screwdriver.

Model No. SEA AK303

Double End Long Reach Spark Plug Box Spanners with L-Bar

lS de

10pc Diamond Needle File Set

158

S16

E lS

• Double end, traditional style, long reach spark plug box spanners with L-bar.

A SE

160

Model No.

Size

Length

SEA MS160

14/16mm

180mm

SEA MS158

16/21mm

100mm

SEA MS161

18/21mm

175mm

• Vinyl dipped handle shafts for extra comfort. • Contents: Flat Parallel, Flat Taper, Half-Round, Three-Square, Square Form, Round Form, Oval Form, Knife Form, Crossing File, Barrette File. • Average Overall Length: 140mm.

Model No. SEA AK577

Ø43-102mm Motorcycle Oil Filter Claw Wrench

Pilot Screw Adjusting Tool

Motorcycle Locking Pulley Holder

• Chrome polished carbon steel construction with 3/8" & 1/2"Sq drive. • Also suitable for use with a 21mm spanner. • Claws grip filter tighter as more torque is applied. • Fits a range of popular motorcycle can filters ranging from 43 to 102mm.

• 460mm Deep access tool, particularly suited to adjustment of motorcycle carburettors. • 110° Angled head gives improved access to hard to reach areas. • One turn of handle equals one turn of slotted blade. • Blade tip height is adjustable Model No. allowing it to be set in place during operation. SEA MS013

• Suitable for holding flywheels, clutches and pulleys during removal and installation. • 8mm Pins on one side and flat blades on the other. • Features locking adjustment screw to keep tool at required set size with quick release when finished.

Model No. SEA MS004

Model No. SEA MS036

3pc Motorcycle Compression & Fuel Pressure Gauge Set

2.5ltr Motorcycle Oil Drain Pan

Fork Seal Driver

• Set of three gauges with connectors and adaptors for testing compression and fuel pressure on motorcycles. • Gauges range from 0-300psi for compression testing, 0-7bar(0-100psi) for fuel pressure and 0-1bar(0-100kPa) for low pressure fuel. • Spark Plug Sizes: 8, 10, 12, 14mm. • Hose Lengths: 220mm. Model No. • Fuel Connector Sizes: Ø6.4, 7.9mm.

• Heavy-duty polypropylene construction, ideal for draining oils and antifreeze. • Sloped design to easily tip contents out of pan. • Thin contoured design to prevent accidental movement while in use. Model No.

• Designed for easy installation of fork seals. • Limits potential damage caused by other installation methods to the forks. • Minimum/Maximum Fork Ø: 35-55mm.

SEA MS100

SEA MDRP01

Motorcycle Fork Seal Drivers

Model No. SEA MS016

6pc Motorcycle Swingarm Lock Nut Set

M o. lN

e od

Model No. MS053

• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. • Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance. • Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily. • Limits potential damage to the forks caused by using other methods.

Model No. MS058

Model No.

Fork Diameter

SEA MS052

33mm

SEA MS053

35-36mm

SEA MS054

39mm

SEA MS055

41mm

SEA MS056

43mm

SEA MS057

45mm

SEA MS058

46-47mm

SEA MS059

48mm

SEA MS060

49-50mm

SEA MS061

54mm

• Four tooth sockets, specially designed to remove castellated lock nuts found on motorcycle swingarms. • Also suitable for some engine mounting nuts. • Supplied in storage case.

Model No. SEA MS050

9pc Motorcycle Wheel Bearing Removal Kit

Motorcycle Steering Stem Bearing Race Removal Tool

3pc Motorcycle Spindle Tool Set

• For easy removal of wheel bearings. • Covers sizes from 10-25mm so will suit most popular motorcycles and ATV/Quad Bikes. • Drift Shafts; 250, 400mm. • Collets; Ø10, 12, 15, 17, 19, 20, 25mm.

• Prevents damage associated with removal of stem bearing. • Universal tool works on most steering stem bearings ranging from Ø30-68mm. • Can be used in conjunction with Model No. VS1831 Steering Tube Bearing Installer.

• Prevents spindle from spinning when tightening or loosening wheel nut. • Use appropriate socket on free end of tool to hold spindle. • Six sizes to fit a variety of motorcycle makes and models.

Model No. SEA MS062

Model No. SEA MS040

Model No. SEA MS008

1ltr Motorcycle Portable Fuel Tank

Motorcycle Twin-Clamp Cable Oiler

9pc Spoke Wrench Set

• Must have item, when needing to remove fuel tank to perform maintenance on your motorcycle. • Eliminates need to balance fuel tank in an awkward position. • Simply remove your tank, connect the auxiliary fuel tank, which is gravity fed, and hang it up using the hook provided. • Features 1ltr tank, 950mm hose, two hose clamps and on/off tap.

• Twin-clamp cable oiler for use with spray type silicone or oil on motorcycle cables.

• Specially designed spoke wrench with eight interchangeable sized heads. • Suitable for adjusting spoke tension and correcting buckled wheels. • Sizes: 5.4, 5.6, 5.8, 6, 6.2, 6.4, 6.6, 6.8mm.

Disc Brake Opening Tool

Heavy-Duty Motorcycle Chain Splitter & Riveting Tool Set

Weighted Motorcycle Brake Bleeder

• Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement. • Features moulded rubber handle enabling extra grip.

• Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links. • Set is also ideal for use on horticultural and agricultural machinery. • Includes tools designed for riveting and plate holder for connecting links accurately.

• One-man bleeding/servicing of hydraulic brakes and clutches. • The kit utilizes a small weighted non-return valve and a connector hose that attaches to the scooter or motorcycle bleed nipple. • As the brake/clutch are bled, the valve prevents the used fluid and air being drawn Model No. back into the system.

Model No. SEA MS029

Model No. SEA MS015

Model No. SEA MS038

Model No. SEA MS025

Model No. SEA MS086

SEA MS098

24 Bin & Panel Combination

Key Cabinet with 45 Key Tags

• Bins manufactured from shockproof polymer which is resistant to mild acids, solvents and oils. • Bins have a high thermal stability and resist damage from extremes of temperature. • Bin Dimensions (W x D x H): 100 x 110 x 75mm. • Steel Panel Dimensions (W x D x H): 630 x 10 x 380mm. • Supplied with heavy-duty steel back panel.

• Bins manufactured from shockproof polymer which is resistant to mild acids, solvents and oils. • Bins have a high thermal stability and resist damage from extremes of temperature. • Bin Dimensions (W x D x H): Medium; 100 x 160 x 75mm, Large; 100 x 210 x 75mm. • Steel Panel Dimensions (W x D x H): 630 x 10 x 380mm. • Supplied with heavy-duty steel back panel.

• Seamless steel construction with durable coating for corrosion resistance. • Fitted with high quality cam type lock and supplied with two keys. • Piano hinged door with catch plate gives added security. • Supplied with a pack of colour-coded key tags. • Includes mounting screws and wall plugs. • Size (W x D x H): 240 x 80 x 300mm.

Model No. SEA TPS130

Model No. SEA TPS131

Model No. SEA SKC45

White Cable Ties - Packs of 100

d Mo

C o.

N el

Cutting Disc Ø75 x 2mm 10mm Bore Pack of 5

4 00

Splashproof Standard Blade Fuse Holders - Packs of 10

Model No. FHSP20

0 T3

C o. lN

8 04

Model No. FHSP30

• Ties manufactured from nylon 66 making them heat resistant over the temperature range -40°C to +85°C. • Supplied in handy sized packs. • Suitable for workshop, garden and home applications.

Model No.

• General purpose flat cutting discs recommended for use with Sealey and other leading makes of grinding and cutting power tools.

• Splashproof fuse holders. • Packs of 10.

Size

Model No.

Rating

SEA CT20048P100W

200 x 4.8mm

SEA FHSP20

20Amp

SEA CT30048P100W

300 x 4.8mm

SEA FHSP30

30Amp

Model No. SEA PTC/3C5

180pc 50 & 100mm Heat Shrink Tubing Assortment - Mixed Colours

100pc 200mm Heat Shrink Tubing

88pc Bonded Seals Assortment - Metric

Thin wall heat shrink tubes. RoHS compliant. Shrink Ratio: 2:1. Mixed Colours: Black, Blue, Red, White, Yellow. Lengths: 50, 100mm. Size (Approximate Quantity) - 50mm: Ø3.2 (x60), Ø4.8 (x40), Ø6.4mm (x20). • Size (Approximate Quantity) Model No. 100mm: Ø3.2 (x30), Ø4.8 (x20), Ø6.4mm (x10). SEA HST501MC • Supplied in partitioned box.

• • • • • •

Thin wall heat shrink tubes. RoHS compliant. Shrink Ratio: 2:1. Colour: Black. Length: 200mm. Size (Approximate Quantity): Ø3.2 (x30), Ø4.8 (x30), Ø6.4 (x20), Ø9.5 (x10), Ø12.7mm (x10). • Supplied in a pack.

• Bonded seals (Dowty Seals) assortment. • Contents (Approximate Quantity): M18 (x8), M20 (x5), M22 (x5), M24 (x5), M10 (x20), M12 (x15), M14 (x15), M16 (x15). • Supplied in partitioned box.

225pc Rubber O-Ring Assortment Metric

225pc Air Conditioning Rubber O-Ring Assortment - Metric

419pc Rubber O-Ring Assortment Metric

• Contents (Approximate Quantity): Ø3.5 x 1.7 (x20), 4.5 x 1.7 (x20), 5 x 1.7 (x20), 6 x 1.7 (x20), 7.5 x 1.7 (x20), 9 x 1.5 (x15), 9.5 x 2.5 (x15), 10.5 x 2.5 (x15), 12.5 x 2.5 (x10), 14 x 2.5 (x10), 15.5 x 2 (x10), 15.5 x 2.5 (x10), 17 x 2.5 (x10), 18.5 x 3.5 (x10), 19 x 2.5 (x10), 21 x 3.5mm (x10). • Supplied in partitioned box.

• Made from HNBR. • Designed for use with Freon R134a making them suitable for automotive air conditioning units and many other applications.

• Manufactured from Buna-N. • Suitable for personal and professional workshops, garages and plumbing. • Supplied in partitioned interspaced box.

• • • • • •

Model No. SEA AB004OR

Model No. SEA HST200B

Model No. SEA ACOR225

Model No. SEA AB010DS

Model No. SEA BOR419

Universal CVJ Boot Clamp Kit

Automotive Blade Fuse Combination Kit

• Fast and simple to use. • Kit includes 56m of high quality stainless steel banding with a tensile strength of 420N/mm². • Dispenser case also houses 150* clamp sets and unique pliers with integrated cutters and band tensioner. Model No. • Never be caught without the right sized boot clamp again. SEA BSL102 * Approximate quantities

• Combination of 24 packs of the most popular automotive mini, standard and maxi blade fuses. • 24 bin wall mounted storage system. • High thermal stability and resists damage from extremes of temperature. • Heavy-duty steel back panel. • Labelling tags supplied. • Contents: MBF250, MBF350, MBF450, MBF550, MBF1050, MBF1550, MBF2050, MBF2550, MBF3050, MBF7550, MF2010, MF3010, MF4010, MF5010, SBF350, SBF550, MF6010, MF7010, MF8010, SBF1050, SBF1550, SBF2050, SBF3050, SBF7550, TPS131

Model No. SEA COMBOABF

Automotive Fuse Checker & Puller

60Amp Splash Proof Maxi Blade Fuse Holder - Pack of 2

Parts Cleaning Brush with Hose

• Checks continuity of blade-type automotive fuses, in or out of fuse holder. • Green LED indicates fuse is OK. • Also simplifies the removal of faulty fuses.

• Splashproof fuse holder. • Suitable for maxi blade fuses up to 60A.

• Fits onto the flexible spout of Sealey parts cleaning tanks (except SM21) and allows a stream of fluid to pass through the bristles for extra cleaning power. • Supplied with hose, adaptor nipple and two hose clips.

Model No. SEA FHMAXSP60

Model No. SEA CFT1

555pc Imperial & Metric Split Pin Assortment Small Sizes

• Contents (Approximate Quantity): 1/16" x 1" (1.6 x 25.4mm) (x150), 3/32" x 1" (2.4 x 25.4mm) (x150), 3/32" x 1-1/2" (2.4 x 38mm) (x100), 1/8" x 1-1/4" (3.2 x 32mm) (x75), 1/8" x 2" (3.2 x 51mm) (x50), 5/32" x 2-1/2" (4 x 63mm) (x30). • Supplied in partitioned box.

Model No. SEA AB001SP

5m Clear Silicone Repair Tape

• • • • • • • • •

Self-fusing silicone. Non-adhesive. Flexible between -50°C to +260°C. Neaten up lines and extension cords in stowage. Wrap hydraulic fittings and other exposed metal connections to help prevent corrosion. Works even over wet, dirty, or oily surfaces. Wrap it around anything that you want to secure, and it will never leave any sticky residue. RoHS Compliant. Model No. Not to be used with Petrol, SEA ST5C Diesel or Brake Fluid.

Ø56-116mm Universal Stretch Boot

• Universal CVJ boot made from high quality neoprene material suitable for use with boot installation tools. • Resistant to grease, water, ozone and extremes of temperature. • Supplied with fitting kit including clips and grease sachet. • Suitable for most car and car-derived van applications. Model No. • Joint Diameter: 56-116mm. SEA CVB01 • Shaft Diameter: 19-30mm.

Bodyshop & Refinishing Combination Kit

Ø56-116mm Universal Stretch CVJ Boot

• Universal CVJ boot made from high quality elastomer material suitable for use with air operated boot installation tools. • Supplied with fitting kit including clips, grease sachet and cutting guide. • Suitable for most car and car derived van applications.

Model No. SEA CV96

Model No. SEA SM201

• Combination of 24 packs of the most popular sized rivets, threaded inserts, cable ties and screws used in the automotive bodyshop. • 24 bin wall mounted storage system. • Heavy-duty steel back panel. • Labelling tags supplied. • Contents: ASW14, ASW101, ASW121, BST3513, BST4219, BST4816, CT20048P100, CT38048P100, PTNP5, PTNP6, PTNP7, RAB3210L, RAB4010L, RAB4010S, RAB4814L, RB4827, RB6419S5, RM4813S, RM4819S, RP4819, RW519, RW825, TIFHM6, TIFHM8, TPS131.

Model No. SEA COMBOBAR

10mm Cylindrical Front End Cut Tungsten Carbide Rotary Burr

10mm Cylindrical Ball Nose Tungsten Carbide Rotary Burr

10mm Arc Pointed Nose Tungsten Carbide Rotary Burr

10mm Conical Ball Nose Tungsten Carbide Rotary Burr

• 10mm Burr made from Tungsten Carbide. • Cylindrical front end No. 6 cut (universal). • For use on soft and hard metals, including welded seams. • Supplied in a plastic storage box.

• 10mm Burr made from Tungsten Carbide. • Ball nose No. 6 cut (universal). • For use on soft and hard metals, including welded seams. • Supplied in a plastic storage box.

• 10mm Burr made from Tungsten Carbide. • Arc Pointed Nose No. 6 cut (universal). • For use on soft and hard metals, including welded seams. • Supplied in a plastic storage box.

• 10mm Burr made from Tungsten Carbide. • Conical ball nose No. 6 cut (universal). • For use on soft and hard metals, including welded seams. • Supplied in a plastic storage box.

Model No. SEA SDB01

Model No. SEA SDB02

4-30mm Double Flute HSS M2 Step Drill Bit

• • • • •

High-speed HSS M2 double flute step drill. Double straight flutes for efficient swarf clearance. Allows clog-free precision drilling. Hole Sizes: 4-30mm in 2mm increments. Supplied in plastic storage case.

Model No. SEA AK4732

Model No. SEA SDB03

9pc Ø10mm Spot Weld Cutter & Drill Bit Set

19pc HSS Cobalt Split Point Fully Ground Drill Bit Set - Metric

• Spot weld cutter features spring loaded centre point to guide cutting crown onto weld. • 8mm HSS drill with 5% Cobalt for longer life, suitable for more specialist materials including galvanized, boron and high stress steels. • Solid cobalt stock allows re-sharpening. • Set includes replacement centre points and cutter crowns.

• Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials. • 135° Split point tip enables bits to bite workpiece quickly, reducing the need for centre mark. • Drills can be re-sharpened without affecting their performance. • Sizes: 1-10mm in 0.5mm increments.

Model No. SEA AK4730

5kg Tub Shot Blasting Beads - Glass

Model No. SEA AK4701

Superseal Male & Female Connector Set

• • • • • • Beads suitable for use in shot blasting cabinets. • Size: 180-300microns.

Model No. SEA SDB06

Model No. SEA B5KG

Designed for applications when a waterproof joint is required. Suitable for cable sizes from 0.5mm² to 1.5mm². Kit contains male and female housing, terminals and seals. Waterproof to IP65. Contents: 1-Way Female Connector (x6), 1-Way Male Connector (x6), 2-Way Female Connector (x6), 2-Way Male Connector (x6), 3-Way Female Connector (x4), 3-Way Male Connector (x4), 4-Way Female Connector (x4), 4-Way Male Connector (x4), 5-Way Female Connector (x3), 5-Way Male Connector (x3), 6-Way Female Connector (x2), 6-Way Male Connector (x2), Model No. Rubber Seal (x100), Female Pin (x100), Male Pin (x100). SEA SSCSET1

Magnetic Camber Castor & Kingpin Gauge

Steering Turntables - Pair

• Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber, castor angles and kingpin inclination. • Two large adjuster knobs, one for conveniently zeroing bubble during angle measurement, and one for adjusting kingpin inclination. • Camber gauge with fixed graduation from -5° to +5°. • Adjustable castor gauge graduated from -3° to +11°. • Kingpin gauge graduated from 0° to 14° left to right. • Magnetic plate Ø: 85mm. • Supplied in carry-case.

• Use in conjunction with Model No. GA42 Gauge Set for accurate castor and kingpin alignment. • Also measures steering angles. • Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements. • Measures up to 45º rotation in either direction. • Maximum loading 1360kg per pair.

Model No. SEA GA450

Steering Wheel Level

1000W 1000WInduction InductionHeater Heater

Model No. SEA VS240

Model No. SEA GA44

• Mobile induction heater for fast heat delivery. • Install appropriate coil and place over or around ferrous metal. • Ideal for loosening stubborn and seized fixings. • Supplied with induction pad for plastic trim/sticker removal. • Induction element delivers high heat fast and effectively. • Contents: Direct Coil; Ø20, Ø32mm, Pad Coil; Ø55mm, U-Coil; 430mm, Flex Coil; 830mm.

• Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. • Ideal for use with Four-Wheel Laser Aligners such as Model No. GA70. • Self-retaining and centring using a spring loaded mechanism. • Features a level bubble to show horizontal position. • Suitable for steering wheels with an internal diameter of between 270mm and 340mm.

Model No. SEA GA460

Four-Wheel Laser Wheel Aligner

• Fast, simple and accurate alignment of both front and rear wheels. • Optimises vehicle performance and set up after installation or modification of steering and suspension components. • Simple and fast to use, it is ideal for the busy professional workshop and has a fast return on investment - potentially adding value to every steering or suspension job. • This fully portable kit is also ideal for track-day set up for the enthusiast. • Works on practically all cars and light commercials with rim diameters between 330mm(13") and 560mm(22"). • Supplied with steering wheel clamp, wheel turn plates and Model No. wheeled storage rack. SEA GA70 • Supplied with comprehensive operating instructions. *TRX-STAR, TRX-TS and TRX-P tools are suitable for driving TORX® and TORX PLUS® fasteners respectively. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.

Promotion Valid Until 30th August 2019