Sealey leaflet Spring / Summer 2020

SPRING / SUMMER 2tonne Low Entry Trolley Jacks

Model No. SEA 1020LEB

Model No. SEA 1020LE

Model No. SEA 1020LEHV

• Min./Max. Saddle Height: 86/380mm.

• Chassis Length: 560mm.

• Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load.

• Profiled lifting arm allows low clearance height of just 86mm making these units suitable for sports and custom cars.

Model No. • Fitted with heavy-duty one-piece hydraulic unit SEA 1020LEBAGCOMBO with pump-through action SEA 1020LEBBAGCOMBO preventing handle locking at maximum ram extension.

SEA 1020LEHVBAGCOMBO

SEA 1020LEOBAGCOMBO

Model No. SEA 1020LEO

Combo Includes: Colour Red Blue

• AS2000F - Folding Axle Stands (Pair) 2tonne Capacity per Stand • AP600JB - Trolley Jack Bag • S0472 - 3pc 1/2"Sq Drive Extendable L-Bar Wrench Set • WCF01 - Folding Wheel Chocks - Pair

Green Orange

3 and 4Tonne Trolley Jacks with Rocket Lift

PROTECTIVE SLEEVE

MAGNETIC TRAY LARGE JACKING SADDLE

Model No. SEA 3040AY

Model No. SEA 3040AO Model No. SEA 3040AG

UNIVERSAL JOINT

TWIN PISTON

POLYURETHANE WHEELS

or

• Heavy base design and large jacking saddle for increased load stability.

• Universal joint release mechanism allows safer, more controlled lowering of the jack.

• Rocket Lift feature brings lifting arm into contact with jacking point with minimal pumps.

• Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor.

• Protective jack handle sleeve helps prevent accidental damage to car bodywork.

• 2 Year Warranty - 2nd year subject to T&Cs and registration on website (www.sealey.co.uk).

Colour

Capacity

Min./Max. Saddle Height

Max. Chassis Height

Length

Weight

SEA 3040AG

Green

3tonne

100/533mm

162mm

740mm

38kg

SEA 3040AO

Orange

3tonne

100/533mm

162mm

734mm

38kg

SEA 3040AY

Yellow

3tonne

100/533mm

162mm

734mm

38kg

SEA 4040AG

Green

4tonne

100/533mm

162mm

751mm

44kg

SEA 4040AO

Orange

4tonne

100/533mm

162mm

751mm

44kg

SEA 4040AY

Yellow

4tonne

100/533mm

162mm

751mm

44kg

Model No.

*Please refer to www.sealey.co.uk/guarantee for more information on guarantees.

35535_Intercars Summer 2020 48pp (english).indd 1

28/02/2020 13:33:05

3tonne Trolley Jack

Min./Max. Saddle Height: 133/505mm.

Chassis Length: 661mm.

Integral cog-type release mechanism with two-piece handle.

Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle.

• Fitted with safety overload valve and ‘pump-through’ valve to prevent handle locking once at maximum lift height.

• • • •

3tonne Trolley Jack Super Rocket Lift Combo

3tonne Standard Chassis Trolley Jack with Axle Stands (Pair)

Jack Min./Max. Saddle Height: 133/515mm.

Single-piece hydraulic unit with heavy chassis design.

Integral American cog-type release mechanism and long two-piece handle.

Heavy-duty castors and large saddle design ease positioning under vehicle.

Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension.

• Ideal for loaded vans up to 3.5tonne GVW. • Supplied with Ratchet Type Axle Stands, Model No. 3tonne (3000kg) capacity per stand (6tonne (6000kg) per pair).

SEA 3010CX • Axle Stand Min./Max. Working Height: 285/420mm.

• • • • •

Model No. SEA 3000CXD

1.5tonne Heavy-Duty Scissor Jack

Package includes: • 3015CXD - 3tonne Trolley Jack with Super Rocket Lift • AK730 - 600mm 1/2"Sq Drive Breaker Bar • MG796L - Mechanic’s Gloves Padded Palm - Large • VS8573 - Mechanic’s Kneeling Mat EVA - 28mm • AS3R - Axle Stands (Pair) 3tonne Capacity per Stand - Red

Model No. SEA 3015CXDCOMBO2

3tonne Trolley Jack Combo

Package includes: • 3290CX - 3tonne Standard Chassis Trolley Jack • AK730 - 600mm 1/2"Sq Drive Breaker Bar • MG796L - Mechanic’s Gloves Padded Palm - Large • AS3R - Axle Stands (Pair) 3tonne Capacity per Stand - Red • VS8573 - Mechanic’s Kneeling Mat EVA - 28mm

Model No. SEA 3290CXCOMBO

• Min./Max. Height: 100/375mm.

• Fine rolled threading and precision made thrust bearing for long life and smooth operation.

Model No. SEA 58M

4tonne Modular Pit Ramp Kit • Modular design is ideal for portability, storage and enables user to change length.

• Manufactured from durable UV resistant polypropylene.

• Suitable for professional or serious DIY applications.

• Allows access to the underside of the vehicle.

• 350mm Wide ramps for broad range of vehicles - recommended maximum tread width 290mm.

• 4tonne Maximum capacity 2tonne per ramp.

• Easy to remove and reattach the simple interlocking sections.

• Size: 4655 x 350 x 170mm (x2).

Model No. SEA PRK01

2 35535_Intercars Summer 2020 48pp (english).indd 2

28/02/2020 13:33:09

1tonne Adjustable Portable Gantry Crane Combo

Package includes: • SG1000 - 1tonne Portable Adjustable Gantry Crane • PT1000 - 1tonne Plain Trolley • CB1000 - 1tonne Chain Block 2.5m Drop

Model No. SEA SG1000KIT

300kg Capacity Engine Support Beam • • • •

Min./Max. Width: 585/1580mm.

Supports and accurately positions engine.

Ideal for replacing anti-vibration mountings.

Aids the removal of gearboxes and transmissions.

Model No. SEA ES300

Jacking Beams with 1.6m Extending Arms & Flat Roller Supports • Fully certified and approved to comply with MOT requirements.

• 1.6m Load arm reach.

• Beam Lift: 95-300mm.

• Two-stage mechanical safety lock and telescopic finger guards.

• Spring loaded flat arms with roller bearings.

• Optional hook arms supplied.

• Supplied with two pairs of aluminium support blocks.

• Wide lift configuration meets MOT recommendation for lifting on jacking point.

Model No.

or

Capacity

SEA SJBEX200

2Tonne

SEA SJBEX300

3Tonne

Under Vehicle Engine/Gearbox Support

10tonne Straightener Kit with Variable Tilt

• • • •

• Designed to support the engine or gearbox when mountings or gearbox are being removed.

• Ideal when replacing clutches or timing belts.

• Removes the need for using a transmission jack or engine support beam.

• Fully adjustable, making the unit suitable for most transverse and in-line configurations.

• Fitting is by suspending underneath the vehicle Model No. by support hooks and counter-balanced against SEA VS0110 the underside of the vehicle.

Fully interchangeable parts and hydraulics.

Variable position upright allows six preset angles of pull plus a seventh upright position.

Supplied as standard with SuperSnap® manual hydraulic pump and ram.

Supplied with Pull Clamp (x2), Sill Clamp (x2), Chain (x2), Chain Hook (x2), Carriage Anchorage Tube, Tube Stand (x2).

Model No. SEA DZRE92/C

3 35535_Intercars Summer 2020 48pp (english).indd 3

28/02/2020 13:33:13

Rivet & Threaded Nut Rivet Kit

• Drop-forged frame with patented folding mechanism for compact storage.

• Heavy-duty head suitable for fixing blind rivets and threaded nut rivets to thin sheet material.

• Suitable for aluminium, steel and stainless steel.

Model No. • Comfortable cushion grips.

SEA AK39602

Air/Hydraulic Riveter

Heavy-Duty Air/Hydraulic Riveter

• Suitable for aluminium, • steel and stainless steel rivets up to 3/16".

• • Supplied with four riveting nozzles and two spanners.

• • Trigger operated riveter with hardened steel jaw assembly and rivet shaft safety cap.

• • Will handle heavy assembly work.

Model No.

Suitable for aluminium, steel and stainless steel blind rivets up to 1/4".

Supplied with five riveting nozzles and two spanners.

Nozzle Sizes: 3/32"(2.4mm), 1/8"(3.2mm), 5/32"(4mm), 3/16"(4.8mm), 1/4"(6.4mm).

Trigger operated riveter with hardened steel jaw assembly Model No. and rivet shaft safety cap.

SEA GSA314 • Ideal for heavy assembly work.

SEA GSA312

Plastic Riveting Kit

Trim Clip Removal Pliers

• Suitable for applying plastic rivets found in automotive applications.

• Designed for one-handed operation and one-stroke setting.

• Allows access in hard-to-reach areas not accessible by conventional lever type tools.

• Universal nose piece suitable for all sizes of plastic rivets.

• Rivets: 10pc x Ø6.6 x 17.2mm, 10pc x Ø6.3 x 25.2mm, 10pc x Ø5 x 15.8mm, 10pc x Ø5 x 17.2mm.

Model No. SEA RT001

• Spring-loaded pliers for trim clip removal without trim damage.

• Easy access into confined areas, such as bumper covers.

Model No. • Length: 240mm.

27pc Trim & Panel Clip Tool Set

• Tools designed to simplify trim and trim stud removal.

• Manufactured from resilient plastic to minimize panel damage and marking.

• Comprehensive 27pc trim clip and panel removing set.

• Manufactured from resilient nylon to minimize marking.

• Supplied in a heavy-duty Model No. storage pouch.

Heavy Lift Suction Cup with Vacuum Grip Indicator

Heavy lift capacity.

Red line indicator warns of any vacuum loss.

Release valve lever for quick removal.

Easy attachment on smooth, non-porous flat surfaces.

Complete corrosion resistant finish.

Cup: Ø206mm.

Maximum Lift Capacity: Model No. 60kg (Horizontal).

SEA AK98945 • Supplied in storage case.

• • • • • • •

• Suitable for the removal of door trim clips on most vehicles.

• Features coated U-profile tip to reduce the risk of damage to surrounding trim and contoured textured comfort grip handle.

SEA RT004

5pc Trim & Upholstery Tool Set

Model No. SEA RT/KIT

Door Trim Clip Tool

Model No. SEA RT007

Rotating Panel Repair Stand

SEA RT27KIT

Upholstery/Body Cleaning Gun

Compact design but handles the larger bonnets, tailgates etc.

Ideal for doors, bonnets, bumpers, wings and spoilers.

Fully adjustable, rotates full 180°.

Adjustable and rotating bars make this stand suitable for almost all panel types.

• Portable for easy manoeuvring of application from preparation to spray booth.

• • • •

• Designed for the car dealer and professional valeter, this must have tool cleans hard to reach areas such as seat runners, door trims, dashboards, upholstery and bodywork.

Model No. • Tornado action lifts dirt out of SEA BS101 upholstery.

Model No. SEA MK79

4 35535_Intercars Summer 2020 48pp (english).indd 4

28/02/2020 13:33:18

75L Shot Blaster with Water Trap & Wheels

30W Cordless Plastic Welding Repair Kit

• Pressurised tank for maximum power.

• Supplied with 2.4m rubber hose, five ceramic nozzles and in-line water trap for moisture-free grit blasting.

• Also includes bayonet air line coupling and airflow regulator.

• Accepts a variety of grits up to 700microns and is suitable for stripping rust and paint from wheels, chassis, panels and other corroded/painted surfaces.

• Cordless and lightweight with durable anti-slip rubber grips for added comfort.

• Inbuilt LED to illuminate welding area in low light areas such as engine bays.

• Kit includes plastic welding tip, plastic welding with pipe guide tip, hot staple tip, plastic welding rods in ABS/PP/PE/PS, 3 pcs of reinforcing mesh, 50 pcs 0.8mm flat staples and 50pcs 0.6mm flat staples as well as USB charging lead and safety stand.

• Heats up to a max temperature of 500°C. • Battery: 2.4Ah Li-ion.

• Operating Time: 40min.

• Charging Time: 3.5hr.

Model No. SEA SB998

4pc Smart Eraser Air Tool Kit

4pc Air Tool Kit with Accessories

• Medium stroke air hammer, air die grinder, 1/2"Sq drive air impact wrench and 1/2"Sq drive air ratchet wrench.

• Includes; WallDrive® Sockets, Extension Bar, Grinding Points, Chisels and Accessories.

• Complete kit for a variety of body preparation tasks.

• Includes pinstripe removing pad, abrasive wheel and two wire wheels.

• Air tool features two handles for maximum control during use.

• All pads/wheels available separately.

• 2-Year Guarantee.

Slim Body Reciprocating Air Saw

Model No. SEA SA695

19pc Air Blow Gun Kit

Model No. SEA SA2004KIT

Paint Can Opener/ Stirrer Pack of 5

• Carbon steel paint can opener with black plastic handle.

• Tool Designed for the quick and easy opening of paint cans without damaging them.

• Easy to clean.

• Suitable for a variety of bodyshop applications such as cutting through panels, sills and chassis members.

• Excellent for initial crash-repair preparation when quick removal of damaged panels is required.

• Fitted with safety trigger device.

• Supplied with a starter pack of blades.

• Air Supply: 90psi.

Model No. SEA SA348

Model No. SEA PA01

Magnetic Spray Gun Holder 2 Gun

• Die-cast metal body with moulded handle and hanging point.

• Palm type gun with thumb trigger control.

• Supplied with jet and safety nozzle.

• Quick release coupling/adaptor kit and tyre pressure gauge.

• Ø1/4"(6mm) x 7m PE air hose with 1/4"BSP Male connectors.

Model No. • Maximum Operating Pressure: SEA SA320K 110psi.

• Heavy-duty magnetic bracket with six large magnets which will adhere to any ferrous surface.

• Composite covered magnets and PVC bumper help prevent against damaging surface.

• Dimensions (H X W): 120 x 200mm.

Model No. SEA MSH03

*Please refer to www.sealey.co.uk/guarantee for more information on guarantees.

35535_Intercars Summer 2020 48pp (english).indd 5

Model No. SEA SDL14

5 28/02/2020 13:33:22

1/2"Sq Drive Composite Air Impact Wrench Twin Hammer

1/2"Sq Drive Air Impact Wrench Twin Hammer

1/2"Sq Drive Composite Air Impact Wrench Twin Hammer

• Breakaway Torque: 1320lb.ft(1789Nm).

• Maximum Torque: 1000lb.ft(1355Nm).

• Twin hammer design gives the wrench a high torque output making it suitable for jobs that would normally require a 3/4" impact wrench.

• Features spring mounted rotor blades, providing constant power and extended life.

• Fingertip control of power and direction via lever on rear of wrench.

• Handle exhaust with built-in silencer to help reduce noise level and limits circulation of brake dust on wheel applications.

Model No. • 2-Year Guarantee.

• Breakaway Torque: 500lb.ft(680Nm).

• Maximum Torque: 480lb.ft(653Nm).

• Powerful impact wrench with twin hammer mechanism for increased torque.

• Air motor features quality bearings, ductile steel end plates and carefully finished components to ensure smooth running and maximum power.

• Combination forward/reverse and speed selector.

• 2-Year Guarantee.

Model No.

• Breakaway Torque: 590lb.ft(800Nm).

• Maximum Torque: 450lb.ft(610Nm).

• Combination of composite materials, alloyed metals and twin hammer design, result in a lightweight, durable and powerful air impact wrench.

• Composite handle helps reduce the effects of vibration and chill.

• Handle exhaust reduces noise output and limits the circulation of brake dust on wheel applications.

• Fingertip Control of power and direction via lever on rear of Model No. wrench.

SEA SA6007

SEA SA602

SEA SA201

20tonne Floor Type Hydraulic Press

30tonne Floor Type Hydraulic Press

50L Workshop Parts Cleaning Tank

Table Aperture: 100mm.

Working Table Width: 630mm.

Ram Stroke: 185mm.

Overall Height: 1796mm.

Detachable pump and ram allowing hydraulics to be used for other purposes when press is not in use.

• Supplied with gauge.

• • • • • •

Table Aperture: 164mm.

Working Table Width: 695mm.

Ram Stroke: 150mm.

Steel frame construction.

2-Speed hydraulic pump unit.

Sliding hydraulic ram assembly giving 200mm of lateral travel for off-centre pressing applications.

• Fitted with ram pressure gauge.

Model No. • Supplied with flat pressing SEA YK30F plate/V-blocks.

• • • •

• • • • •

Model No. SEA YK20F

American-Style Creeper

Composite Creeper with 6 Wheels

Heavy-duty steel.

Powder coat paint finish. Ø60mm Composite castors with ball bearing swivels.

Vinyl covered back and headrest.

Model No. • Size (L x W x H): SEA SCR75 920 x 430 x 95mm.

• • • • • •

• • • •

6 35535_Intercars Summer 2020 48pp (english).indd 6

One piece, moulded high impact polymer creeper.

Two integral tool trays.

Padded headrest.

Low profile.

Model No. Six Ø75mm swivel castors.

Size (L x W x H): SEA SCR80 1000 x 480 x 115mm.

One-piece heavy-duty steel tank.

Fully sealed electric motor with magnetic drive pump unit.

Flexible metal nozzle directs solvent over work.

Lid features self-latching fusible link which automatically snaps lid shut in the event of a fire.

• Supplied with removable shelf, small parts basket and workshop stand with integral storage shelf.

Model No.

SEA SM19

Composite Creeper with 4 Wheels

• • • • •

One piece, moulded high impact polymer creeper.

Padded headrest.

Low profile.

Four Ø50mm swivel castors.

Size (L x W x H): Model No. 915 x 410 x 95mm.

SEA SCR80S

*Please refer to www.sealey.co.uk/guarantee for more information on guarantees.

28/02/2020 13:33:25

900A 12V RoadStart® Emergency Jump Starter

1900A 12V RoadStart® Emergency Jump Starter

• Cable & Clamp Length: 0.6m.

• Delivers up to 900 Peak Amps of initial starting power.

• Suitable for starting vehicles with 4 cylinder petrol or diesel engines up to 2L. • Front panel displays internal battery charge level and includes an integral LED work light.

• Reverse polarity and short circuit protection with audible warning.

• Mains charger with automatic power cut-off prevents damage to battery whilst charging.

• Inbuilt MOSFET circuit protection.

• Use as a 12V power supply too - includes two vehicle accessory sockets.

• Single 5V 2.4A USB output.

Model No. • Supplied with mains charger.

SEA RS1B

• Cable & Clamp Length: 0.7m.

• Delivers up to 1900 Peak Amps of initial starting power.

• Suitable for starting vehicles with 8 cylinder petrol engines up to 5L and 6 cylinder diesel engines up to 3.5L. • Front panel displays internal battery charge level and includes an integral LED work light.

• Reverse polarity and short circuit protection with audible warning.

• Mains charger with automatic power cut-off prevents damage to battery whilst charging.

• Inbuilt MOSFET circuit protection.

• Use as a 12V power supply too - includes two vehicle accessory sockets.

• Single 5V 2.4A USB output.

Model No. • Supplied with mains charger.

SEA RS103B

Rechargeable Ultraviolet Leak Detection Torch

Auto Darkening Welding Helmet Shade 9-13

7.6L Oil/Fluid Drain Pan • Made from high density Polyethylene with UV stabilisers.

• Features anti-splash lip that contains fluid when carrying or pouring.

• Large handles and enclosed pouring spout aid return of oil/fluid to recycling container.

17L Antifreeze/Fluid Drain Pan

Model No. SEA DRP02

Three-Way Fill Pistol Type Grease Gun • Pistol style gun with contoured pump handle.

• Die-cast pump head with air-bleed valve.

• Three-Way fill with cartridge, bulk or manual capability.

• Rigid delivery tube and push-on hydraulic 4-jaw coupling.

• Accepts standard 400g cartridges.

• Delivery per Stroke: 1.25cm³.

• Optional 300mm Flexible Delivery Tube Model Model No. GGH300.

• Ideal for detecting leaks in air conditioning and cooling systems with the use of fluorescent dye (not included).

• Illumination can be adjusted from spotlight to wide area, by simple push/ pull action of the head.

• Features lightweight aluminium housing.

• Battery charged via USB lead (supplied).

Model No. SEA VS6021

No. SEA AK446

Metal Drain Pans

Complies with BS EN 379, BS EN 175 and DIN standards.

Fully automatic switching from light to dark on striking arc.

Shade is selected by a rotary knob on side of helmet.

Solar panel power supply - no batteries required.

Features sensitivity and delay controls for switching light to dark.

• Suitable for MIG, TIG Model No. and arc welding.

SEA S01001 • • • • •

• Made from high density Polyethylene with UV stabiliser.

• Suitable for antifreeze changes.

• Features anti-splash lip that contains fluid when carrying or pouring.

• Large handles and enclosed pouring spout aids return of oil/fluid to recycling container.

• Diameter: Ø460mm.

• Height: 150mm.

Model No.

SEA DRP04

Needle Nose Grease Dispenser

3/4"BSP Zinc Die-Cast Lockable Drum Tap

• For use with all brands of manual grease gun (not for use with power greasers).

• Dispenses a fine bead of grease.

• Long nozzle provides access for hard to reach areas.

• Ideal for lubricating constant velocity joints.

• Zinc die-cast, push-pull tap.

• Locking facility to prevent unauthorised access.

• Nitrile seals, suitable for most liquids normally stored in plastic and steel drums.

Model No. SEA AK447

Model No. SEA TP128

Low Profile Drip Trays • Low profile drip trays manufactured from hard-wearing recycled polypropylene.

• These have a broad appeal to both the classic car user and general mechanic.

• Purpose-made for the recovery of oil and fluids, these drip trays can be left under most vehicles due to the low profile design.

• Ideal for use over prolonged periods of time, catching any drips that may occur whilst in storage or in the workshop.

. SEA el No

1

DRPM

Mod

Model

or

A o. SE

el N Mod

09

A DRPL

No. SE

4

DRPM

• Zinc plated pans, ideal for oil changes, cleaning and storing vehicle components.

• May also be used as a drip tray under vehicles.

el Mod

or

20

RPL1

EA D

No. S

Model No.

Capacity

Size (W x D x H)

SEA DRPM1

9L

432 x 331 x 89mm

Model No.

Capacity

SEA DRPM2

12L

489 x 371 x 91mm

SEA DRPL09

9L

570 x 390 x 50mm

SEA DRPM3

16L

432 x 331 x 143mm

SEA DRPL100

100L

1000 x 120 x 1000mm

SEA DRPM4

20L

489 x 371 x 153mm

SEA DRPL120

120L

1200 x 120 x 1200mm

Size (W x D x H)

7 35535_Intercars Summer 2020 48pp (english).indd 7

28/02/2020 13:33:30

Ø22mm x 3.14m Syphon Pump

• Long reach syphon for efficient transfer of fluids.

• Suitable for low viscosity oils and non-aggressive chemicals.

• Ø22mm hose for increased flow rate.

• Length: 3.14m.

6.5L Manual Vacuum Oil & Fluid Extractor

5.5L Manual Vacuum Oil & Fluid Extractor

• Ideal for other liquids such as water and soluble oil.

• Supplied with Ø5.8 and Ø6.7mm sprung steel lined suction probes and a Ø9.8 x 1m extension tube.

• Probes can be stored in the holder when not in use.

• To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit.

• Internal float valve for automatic cut off when unit has reached maximum capacity.

• Avoids searching for drain plug keys and getting under the vehicle.

• Unit can be tipped Model No. 90° for easier SEA TP69 emptying.

• Ideal for other liquids such as water.

• To remove oil from a car engine, simply push the probe down the dip-stick tube and pump the handle on the top of the unit.

• Allows other work to be undertaken whilst suction removes fluid.

• Avoids searching for drain plug keys Model No. and getting under SEA TP696 the vehicle.

Model No. SEA VS565

1L Multipurpose Mini Pump

• Multipurpose pump perfect for topping up difficult to access points on motor vehicles, lawnmowers, chainsaws and other jobs around the workshop and home.

• Suitable for all engine oils, transmission fluids, brake fluids and general purpose cleaners.

Model No. SEA TP6804

Oil Funnel

3pc Fixed Spout Funnel Set • Polyethylene funnel set suitable for many fluids including detergents, pesticides, diesel and petrol.

• Contains Ø75mm, Ø150mm and Ø250mm funnels with hanging tabs.

• Not suitable for acetone, gun wash or thinners.

• Square design and tapered spout fits into most engine filling holes.

• Manufactured from durable polypropylene material.

• Rectangular aperture (180 x 100 x 145mm) to accommodate up-ended containers.

Model No. SEA OIL1F

Ø160mm Flexible Spout Valved Funnel with Filter • Heavy-duty polyethylene funnel resistant to oil, fuel and some acids.

• Features lockable valve nozzle and integral wire mesh filter to keep contaminants out.

• Supplied with detachable flexible hose with end cap.

• Fitted with handle for safe and easy pouring.

5L Measuring Jug with Flexible Spout

• Transparent measuring jug with removable flexible spout. Wide base for extra stability.

Model No. SEA VS563

Model No. SEA F98

180ml Oil Can

• Metal can with flexible spout for directional control.

• Trigger operated action for high pressure oil spray.

Model No. SEA VFF1

Model No. SEA TP04

5L Oil Container with Lid & Flexi-Spout

2L Measuring Funnel with Lid and Base

• Tough polyethylene jug resistant to oil and most acids.

• Removable flexible spout.

• Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.

• A jug and funnel built into one.

• Graduations that can be used for transferring a measured quantity of fluid without any spills or splashes.

• Simple press of a lever dispenses liquid through a built-in metal sieve to ensure contaminant free transfer.

• Replace funnel back into base in between use, no need to pour unwanted liquids back into original storage container.

• Recommended use: oils and other similar viscosity liquids.

• Do not use with water based media.

Model No. SEA JDL5

Model No. SEA MF2/BC

8 35535_Intercars Summer 2020 48pp (english).indd 8

28/02/2020 13:33:33

Hydraulic Bearing Separator/Puller

• Forged steel three-way bearing separator and gear puller set.

• Operated with supplied 10tonne hydraulic ram or manual force screw.

• Puller Leg Reach (Size/Spread): 160 (190)mm.

• Separator Capacity: 30-84mm.

• Manual Thrust Screw Length: 210mm.

• Selection of extension rods (x3): 15, 65, 185, 340mm.

Twin Leg Puller Bar Type 80 x 100mm

Easy removal of pulleys, flywheels, bearings and gears.

Drop-forged Chrome Vanadium steel.

Heat treated for added strength.

Zinc plated for corrosion resistance.

Model No. • Thrust bearing prevents SEA AK46080 wear and damage to shaft.

• • • •

Rear Main Oil Seal Remover/Installer Land Rover 2.25

• Crankshaft rear seal remover/installer.

• Time saving tool, supplied with pin punch and self tapping screws to easily remove the old seal.

• Unique design ensures the new seal is pushed in squarely and correctly.

• Fits all petrol and diesel Model No. 2.25 engines with five SEA VSE3038 bearing crankshaft.

Infrared Laser Digital Thermometer 12:1

• Detects energy emission in the infrared spectrum and converts reading into a display of temperature.

• Features laser pointer, data hold and auto power off.

• Temperature is displayed on a large 23mm LCD panel with back-lit display for use in low light areas.

• Temperature can be shown in either °C or °F. • Temperature Range: -50°C to +550°C/-58°F to +1022°F. • Powered by 9V battery (supplied).

Model No. SEA VS904

3pc Triple Leg Gear Puller Set

Model No. SEA PS9821

• Drop-forged, carbon steel reversible legs, and body.

• Swivel thrust plates on larger sizes prevent damage to shaft ends.

• Hex head forcing screws suitable for use with a ratchet or spanner.

• Size/Spread: 75, 100, 150mm.

4pc O-Ring Removal Tool Set

• Set of four angled tools that allow removal of O-rings and seals without damage.

• Features contoured and spoon tips.

• Lengths: 130 (x2), 200mm (x2).

Model No. SEA VS5211

8 & 10mm Glow Plug Heater Element Removal Set

Model No. SEA AK78

600mm Engine Dipstick - Audi

• Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems.

• Can also be used to calibrate the driver’s instrument panel.

• Will also check the engine oil level on Audi; A4/A5 3.2 Model No. 6-cylinder engines.

SEA VS600ED

7pc 3/8" & 1/2"Sq Drive Oxygen Sensor Socket Set

• For removing the heater element that can break off during glow plug removal.

• Supplied with seven drilling/tapping guides: M8 x 1, M10 x 1, M10 x 1.25mm.

• Five glow plug extraction adaptors: M8 x 1, M10 x 1, M10 x 1.25mm.

• Thread: M8, M10.

Model • Drill Ø: 2.5, 3.3mm.

No. SEA VS315

• Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles.

• Windows and slots enable sockets to be fitted over wiring harness.

Model No. SEA SX032

Thermal Imaging Camera

• Combines the function of surface temperature measurement and real-time thermal imaging.

• Features a traditional image camera to pinpoint test area with the ability to mix the thermal image over the top at varying intensities.

• Includes on-screen cursor to accurately locate temperature hotspots.

• Suitable for many industries including automotive, building and electrical.

• Screen Size: 52mm.

• Focal Distance: 50cm (Min. 20cm, Max. 1m).

• Field of Vision: 65°.

• Powered by 4 x AA batteries (supplied).

Model No. SEA VS912

9 35535_Intercars Summer 2020 48pp (english).indd 9

28/02/2020 13:33:36

50-160mm Dial Bore Gauge

Diesel Injection Leak Back Master Kit Bosch/Delphi/Denso

• Precision mechanism with Ø55mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality.

• Measuring Range: 50-160mm.

• Will indicate the deviation from set size by up to 5mm with an accuracy of 0.01mm.

• Probe body, dial indicator, anvils and spacer rings are also included.

• Supplied in wooden storage case.

• Updated kit designed to measure return fuel flow on diesel vehicles up to 6 cylinders, fitted with common rail injection system.

• Identifies worn, blocked or inoperative injectors quickly and easily.

• Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation.

Model No. • Master kit includes range of adaptors to suit Bosch, Delphi, New Delphi and Denso injectors for comprehensive SEA VS2048 coverage of common rail diesel vehicles.

14mm 12-Point 3/8"Sq Drive Spark Plug Socket with Magnetic Retainer

• Designed for use where plug clearance is tight.

• Thin wall 12-point 14mm socket.

• Magnetic insert to retain Model No. spark plug.

SEA AK6568 • Application: BMW.

Valve Stem Seal Pliers Long Stem Straight 16/24V

• Steel long stem aids removal and installation of valve stem seals on 16 and 24 valve OHC engines.

• Serrated tips aid grip.

• Especially suited to Model No. stubborn seals.

SEA VS1671

Valve Spring Compressor Multi-Valve

• Suitable for use on multi-valve petrol and diesel engines with deep-seated valves.

• Suitable also for general use on OHC, OHV and CVH engines.

• Universal jaw with 55-175mm capacity and 165mm throat depth.

• Reversible jaw and adaptor.

Model No. • Twin cam action permits use from above or below valve.

SEA VS154

Model No. SEA DBG5010

12mm Spark Plug Thread Chaser

300mm Spark Plug Pliers

• Suitable for cleaning corrosion and carbon build-up from spark plug threads.

• Also possible to restore minor cross threading damage.

• Designed for deep seated plugs where a slim profile drive is necessary to fit down into the head.

• Features shank above threads for recessed threads.

Model No. • Thread Length: 20mm.

SEA VS724 • Drive: 3/8"Sq.

• Suitable for removal of spark plug boot on deep-seated engine applications.

• Composite handles provide insulation from HT shock and Model No. give added comfort and SEA VS867 control.

OHV Valve Spring Compressor

Valve Collet Remover/Installer

• Permits valve springs and valve stem oil seals to be replaced without the need to remove the cylinder head when used in conjunction with VS1601 Compressed Air Adaptor.

• Reversible jaw adaptor and automatic cam action lock to pre-set spring tension.

• Suitable for use on a wide Model No. range of OHV, OHC and SEA VS160 CVH engines.

• For quick removal/installation of valve collets.

• Firmly push or tap tool with a hammer to remove/install, magnet in tool captures collets.

• Can be used with cylinder head in-situ or on work bench.

• Ideal for replacing broken valve springs or valve stem oil seals without removing the head from the engine.

• For in-situ use, a suitable adaptor (not included) will be required to allow compressed air into the combustion chamber to hold the valve Model No. closed while compressing SEA VS1542 the valve spring.

2pc Valve Grinder Set

• Set of two valve grinders with wooden shafts.

• Suitable for grinding most engine valves.

• Features four sizes of rubber suction cup.

Model No. SEA VS1653

8 & 10mm Damaged Glow Plug Removal Set

• Designed to remove damaged/broken glow plugs from cylinder heads.

• Suitable for glow plugs with an M8 x 1mm and M10 x 1mm thread.

• Set includes all required adaptors for drilling, centring and pulling for the safe removal Model No. of glow plug.

SEA SX0408

10 35535_Intercars Summer 2020 48pp (english).indd 10

28/02/2020 13:33:38

Fuel Injection Pressure Test Kit Test Port

Turbo System Leakage Tester

• Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system.

• Kit supplied with four pairs of stepped adaptors to fit most sizes of hose.

• Adaptor Sizes: 35-90mm.

• Features a pressure gauge, shut-off valve and pressure release valve.

Model No. • Can also be used on cooling system hoses.

SEA VS2030 • Supplied in storage case.

26 Blade Offset Feeler Gauge Dual Marked

• • • •

Imperial graduated 26 blade feeler gauge.

Sizes: 0.005" to 0.030" (0.127 to 0.762mm).

Dual marked in Imperial and Metric.

Blade dimensions: 100 x 12.7mm Model No. (45º-25mm offset).

SEA S0515

• Comprehensive kit of adaptors and fittings for modern Schrader test-port fuel injection systems.

• Components fitted with quick coupling system and safety valve to prevent inadvertent discharge of fuel under pressure.

• High pressure, dual scale gauge with hanging hook and protective bumper.

• Pressure release valve with drain hose for safe fuel recovery.

Model No. SEA VSE211

12 Blade Offset Feeler Gauge Dual Marked

• • • •

Imperial graduated 12 blade feeler gauge.

Sizes: 0.008" to 0.026" (0.203 to 0.660mm).

Dual marked in Imperial and Metric.

Blade dimensions: 95 x 13mm Model No. (45º-25mm offset).

SEA S0516

Piston Ring Groove Cleaner

• Fast and reliable removal of carbon and glaze deposits from piston ring grooves.

• Suitable for pistons between Ø51mm and Ø127mm.

• Supplied with three 6-bladed Model No. cutters covering most SEA VS148 popular piston groove sizes.

Fuel Feed Pipe Pliers

Fuel Feed Pipe Pliers

3pc Petrol Engine Compression Test Kit

• Suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters.

• Designed to compress the quick connect lugs for easy removal without damaging the connector.

• Aluminium alloy construction with profiled head.

• Suitable for releasing connections on in-line fuel line filters.

• Fitted with long handle for restricted access.

• Fitted with Ø65mm gauge having two scales, reading from 0-300psi and 0-2000kPa. • Includes quick coupling 150mm rigid stem with cone-type adaptor and 320mm flexible adaptor with 14 and 18mm screw in adaptors.

• Supplied in storage case.

Model No.

Model No. SEA VS0453

Diesel High Pressure Pump Test Kit

Model No. SEA VS0458

SEA CT951

Diesel Compression Test Kit

• Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses.

• The kit also includes a set of dummy pump regulator and injector pipe blanks.

• Kit allows for a variety of tests to be conducted: - Engine cranking/running pressure test - Maximum pump pressure test - Pump pressure regulator test - Injector leakage test

Model No. SEA VS216

• Up-to-date kit for compression testing on diesel vehicles.

• Contains 17 of the most common dummy glow plugs, covering 29 glow plug types, 33 manufacturers and over 500 model/engine variants from 1999 to 2015.

• Also includes a set of injector adaptors if an alternative method of testing is required.

Model No. • See instructions on Sealey website for complete SEA VSE3158 vehicle applications.

11 35535_Intercars Summer 2020 48pp (english).indd 11

28/02/2020 13:33:41

14pc Diesel Injector Puller Set

Air Hammer Adaptor for Injector Puller

• Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors.

• Ball joint allows hammer to be used in confined areas.

• Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector.

• Supplied in storage case.

• Contents: Slide Hammer, 1/2"Sq Drive Sockets; 25, 27, 29, 30mm, Model No. Tamper-Proof Key, Adaptor (x5) SEA VS2059 (Bosch, Delphi, Denso, Siemens), Ball Joint.

• For use with Sealey injector puller slide hammer sets Model No’s VS2059 & VS2064 or a similar tool that has a minimum 350mm shaft length and air hammer.

• Adaptor allows the air hammer to be used to vibrate the injector loose, instead of using a slide hammer.

• Ideal for stubborn injectors when an alternative method of removal is required.

Model No. • Adaptor Shank Size: .401" Parker Taper.

SEA VS2074 • Supplied in storage case.

Diesel Fuel System Priming Device

4pc Air Conditioning Spring Lock Coupling Tool Set

• Essential for reintroduction of fuel into fuel pump following maintenance such as fitting of new diesel filter or following drainage of fuel tank.

• Must be used whenever Model No. fuel system is disturbed.

• Spring type coupling connectors for air conditioning lines.

• Locking action prevents spray when disconnecting lines.

• Suitable for most Chrysler, Model No. Ford and Vauxhall/Opel SEA VS0454 vehicles.

24mm Hex Drive Fuel Tank Sender Spanner 3-Leg Ø70-165mm

Diesel Injector Puller BMW M47/M57

SEA VS055

• For removing and refitting fuel tank sender mounting rings.

Model No. SEA VS6423

• Designed to remove the copper injector seal when it has stuck into the head.

• Adjusts to allow seals with 6.7-8.7mm internal diameter to be removed.

• Simply drop the tool into the hole left by the injector, tighten the handle and lift out the seal.

Model No.

SEA VS2054

Fuel Line Pliers - VAG

• Designed for removing BMW 2.0, 2.5, 3.0 diesel fuel injectors from M47/M57 engines.

• Allows the removal of seized injectors without the need to remove the cylinder head.

• Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector.

• Also suitable for some Land Rover, MG and Model No. Vauxhall/Opel vehicles that SEA VS2075 share the same engine.

Oil/Petrol/Diesel Transfer Syphon Pump

Injector Seal Removal Tool

• Suitable for fuel lines on VAG group vehicles with sprung hose clips.

• Rotating jaws for easy access to hose clips in confined spaces.

• Spring loaded jaws.

Model No. SEA VS0427

8L Vacuum Fuel/Fluid Extractor

• Suitable for the extraction of all types of engine, transmission and lubricating oils from vehicles and machinery.

• Also suitable for the extraction of petrol/diesel and low viscosity fluids.

• 1.5m Main hose, Ø6.7 x 700mm dipstick oil probe and Ø7 x 400mm universal fluid probe.

• Supplied with 240mm fuel system adaptor for use in conjunction with fuel kit Model No’s VS552, VS553, VS554 and VS555.

• Can also be used for draining fish tanks, basins and sinks.

• Capacity: 8L. • Suitable for the syphoning of oil, petrol, diesel and non-aggressive fluids.

• Delivers approximately 9L/min.

• Transfer Pump Hoses: Ø13mm x 1m (x2), Ø18mm x 1m (x2).

Model No. SEA VS560

Model No. SEA TP204

12 35535_Intercars Summer 2020 48pp (english).indd 12

28/02/2020 13:33:44

Fuel Filter Key - Ford Transit

• For removing and refitting the fuel filter cap when replacing the fuel cartridge on diesel 2.0D, 2.4D and 2.5TDi engines found in VW and Volvo vehicles.

• Drive: 1/2"Sq.

• For removing and refitting fuel filter bowl when replacing the fuel cartridge.

Model No. SEA VS6427

6pc Double End Oil Drain Plug Key Set

Model No. SEA VS6428

Drain Plug Thread Repair Set

VAG Oil Drain Plug key

• Superb for repairing sump, gearbox and differential drain plug threads.

• Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied).

• Set is suitable for the most popular threads used on cars and light commercial vehicles.

• Tap Sizes: M13 x 1.5, Model No. M15 x 1.5, M17 x 1.5, SEA VS660 M20 x 1.5mm.

• 1/4"Sq drive key.

• Suitable for the plastic sump plugs found on VAG TFSi engines.

• Can also be used on the cam Model No. cover of new 1.6 and 2.0 twin SEA VS652 cam diesel VAG engines.

20pc 3/8"Sq Drive Oil Drain Plug Key Set

Safety Sump Plug Remover

Oil Drain Plug Thread Repair Set - M15

• Comprehensive set of keys with mini breaker bar.

• Suitable for sump plugs on engine, gearbox and back axle.

• Includes the new VAG plastic sump plug key.

Model No.

• Designed to remove the sump plug after it has been loosened, without making contact with hazardous hot oil.

• Features 90° edge for turning aid, and magnet for stability.

Model No.

• Ideal for repairing sump, gearbox and differential drain plug threads.

• Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer.

Model No. • Tap Size: M15 x 1.5mm.

• Double end carbon steel keys with chemically blackened finish.

• Suitable for sump plugs on engine, gearbox and back axle.

• Use with 19mm socket on ratchet driver.

• Supplied in storage case.

Model No. SEA AK658

SEA AK6587

SEA VS651

SEA VS615

Oil Drain Plug Master Thread Repair Set

21pc 3/8"Sq Drive Oil Drain Plug Key Set

• Comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads.

• Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied).

• Set is suitable for the most popular threads used on cars and light commercial vehicles.

• Tap Sizes: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5mm.

• Comprehensive set of Chrome Vanadium steel keys with sliding T-bar.

• Suitable for sump plugs on engine, gearbox and back axle.

• Contents: Square Male; 7, 8, 10, 11, 12, 13, 14mm, 5/16", 3/8", Square Female; 10mm, Hex; 8, 9, 10, 12, 13, 14, 17mm, Triangle; 10mm (PSA), Security Spline; M16 (VAG), Model No. TRX-Star**; T45 (Vauxhall/Opel), SEA AK6586 3/8"Sq Drive Sliding T-Bar.

Model No. SEA VS661

**TRX-STAR, TRX-TS and TRX-P tools are suitable for driving TORX® and TORX PLUS® fasteners respectively. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.

Fuel Filter Key - VW/Volvo 2.0/2.4/2.5 Diesel

13 35535_Intercars Summer 2020 48pp (english).indd 13

28/02/2020 13:33:47

Ø108mm 3/8"Sq Drive Fuel Filter Wrench Peugeot/Citroen/Renault

T-Handle Oil Drain Plug Key - VAG

3/8" & 1/2"Sq Drive Oil Filter Claw Wrench Ø65-110mm Capacity

• Designed specifically for the plastic sump plugs found on the VAG TFSi engines.

• Also designed for use on the cam cover of new 1.6 and 2.0 twin cam diesel VAG engines.

• Features T-handle for quick operation.

• Satin chrome finish steel construction with 1/2" & 3/8"Sq drives.

• Also suitable for use with a 21mm spanner.

• Claws grip filter tighter as more torque is applied.

Model No. SEA AK643

Model No. SEA VS653

• Suitable for PSA and Renault vehicles fitted with HDi diesel engines.

• This filter key is required when replacing the fuel filter cartridge.

Model No. SEA VS6430

150mm Strap Wrench

Oil Filter Wrench Band Type Ø65-105mm Capacity

Oil Filter Wrench Band Type Ø105-155mm Capacity

• Suitable for removing and installing oil filters as well as many other applications.

• Adjustable strap fits filters up to Ø150mm.

• Features soft grip handle for added comfort.

• Band type filter wrench.

• Steel strap with heavy-duty cast body and control knob.

• Removes filters with minimal risk of damage.

• Band type filter wrench.

• Steel strap with heavy-duty cast body and control knob.

• Removes filters with minimal risk of damage.

Model No. SEA AK644

Model No. SEA AK6407

Model No. SEA AK645

Oil Filter Strap Wrench Ø60-140mm Capacity

3/8" & 1/2"Sq Drive Oil Filter Claw Wrench Ø63-103mm Capacity

3/8" & 1/2"Sq Drive Oil Filter Strap Wrench Ø300mm Capacity

• Satin finished, drop-forged steel body with hanging hole.

• Reinforced, rubberised strap.

• Satin finished carbon steel construction with 3/8" & 1/2"Sq drive.

• Also suitable for use with a 21mm spanner.

• Claws grip filter tighter as more torque is applied.

• Satin finish cast steel body with 3/8" and 1/2"Sq drives.

• May also be used with a 21mm(13/16") spanner.

• Extra wide Nylon webbing strap suitable for filters up to Ø300mm.

• Use with ratchet wrench.

Model No. SEA AK6404

Model No. SEA AK642

Model No. SEA AK6403

14 35535_Intercars Summer 2020 48pp (english).indd 14

28/02/2020 13:33:49

Ø64.5mm Oil Filter Cap Wrench 14 Flutes - Lexus/Toyota

Ø74mm Oil Filter Cap Wrench 14 Flutes

• Cap type oil filter wrench.

• Crowned top provides extra leverage points for removing stubborn oil filter housing caps.

• Aluminium alloy material minimises risk of damage to filter housing.

• • • •

Model No. SEA VS7112

Cap type filter wrench prevents damage to filter housing.

Will withstand up to 115Nm(85lb.ft) of torque.

Low profile design suitable for use in confined areas.

Applications: Purlux grove filters fitted to Audi, BMW, Citroen, Fiat, Ford, Lancia, Mazda, Mercedes, Nissan, Peugeot, Model No. Porsche, Renault, Suzuki, SEA SX226 Toyota, Vauxhall/Opel, VW.

Ø64.5mm Oil Filter Cap Wrench 14 Flutes - Toyota

Oil Filter Cap Wrench - Mazda 1.5 Diesel

• Cap type oil filter wrench.

• Crowned top provides extra leverage points for removing stubborn oil filter housing caps.

• Aluminium alloy material minimises risk of damage to filter housing.

• Cap type oil filter wrench.

• Designed for the 1.5 Skyactiv-D Mazda engine, launched in 2015.

• Aluminium alloy material minimises risk of damage to filter.

Ø96mm Oil Filter Cap Wrench 18 Flutes - Renault

Oil Filter Remover - Vauxhall 2.0/2.2 Petrol

Model No. SEA VS7111

Oil Filter Cap Remover Ford/Jaguar/Citroen/ Peugeot 2.0D/2.2D Diesel

• Suitable for removing the cap from the oil filter housing on Ford, Citroen, Peugeot 2.0D/2.2D HDi/TDCi diesel engines (DW10C, DW12C) and Jaguar XF 2.2D from 2012 onwards.

• Allows access to the hard-to-reach 27mm hex located on the filter cap.

• Use with 1/2"Sq drive wrench.

Model No. SEA VS7200

30pc Oil Filter Cap Wrench Set

Model No. SEA VS7116

• Extensive set designed for a wide range of vehicles.

• Cap type filter wrenches, made from 7 and 16 gauge steel, will withstand up to 115Nm(85lb.ft) of torque.

• Designed to grip like sockets, thereby minimising the possibility of crushed filters.

• Adaptor allows use with 3/8" or 1/2"Sq drive wrenches.

Model No. • Adjustable oil filter wrench Ø65-120mm.

SEA VS7006

15pc Oil Filter Cap Wrench Set • Cap type oil filter wrench.

• Crowned top provides extra leverage points for removing stubborn oil filters.

• Aluminium alloy material Model No. minimises risk of damage SEA VS7115 to filter housing.

• Suitable for removing the cap from the oil filter housing on Vauxhall/Opel 2.0/2.2 petrol engines.

• Allows access to the hard-to-reach 32mm hex located on the filter cap.

• Use with 1/2"Sq drive wrench.

Model No.

SEA VS7201

Mercedes CDi Injector Stud Repair Kit

• Threaded insert repair kit for Mercedes CDi engine Injector clamping bolt.

• Enables a broken stud repair to be carried out with minimal dismantling.

• Contents: M8 x 1mm Tap, 7mm/8mm Stepped Drill, 6mm Drill, Drill Guide, Thread Insert Fitting Tool, M8 x 1mm Threaded Inserts (x5).

• Thread inserts available separately in packs of five.

Thread Repair Insert Refill Pack of 5

• Refill pack for VS640 injector stud repair kit.

• Contains five M8 x 1mm inserts.

Model No. SEA VS640

Model No. SEA VS640RF

• Cap type filter wrenches, made from 7 and 16 gauge steel and can withstand up to 115Nm(85lb.ft) of torque.

• Designed to grip like sockets, thereby minimising the possibility of crushing filters.

• Electro-black oxide finish Model No. for rust protection.

• Use with 3/8" or 1/2"Sq SEA VS7003 drive wrenches.

15 35535_Intercars Summer 2020 48pp (english).indd 15

28/02/2020 13:33:52

Thread Inserts

Thread Repair Master Kit

Model No. TRM6R

Model No.

Size

SEA TRM5R

M5 x 0.8mm

SEA TRM6R

M6 x 1mm

SEA TRM8R

M8 x 1.25mm

SEA TRM9R

M9 x 1.25mm

SEA TRM10R

M10 x 1.5mm

SEA TRM12R

M12 x 1.75mm

SEA TRM14R

M14 x 1.25mm

• Suitable for five common sizes of thread.

• Creates a stronger internal thread in soft metals.

• Ideal for repairing damaged or stripped internal threads.

• Protects tapped threads against wear and damage.

• Includes drill bits, thread taps, insert installation and lug breaking tools.

• Supplied in metal storage case.

M14 x 1.25mm 15mm Thread Insert for VS301 - Pack of 10

Thread Repair Kit M5 x 0.8mm

• Thread inserts for Model No. VS301.

• Creates a stronger internal thread in soft metals.

• Ideal for repairing damaged or stripped internal threads.

• Protects tapped threads against wear and damage.

• Includes drill bit, thread tap, insert installation and lug breaking tool.

• Supplied with three different lengths of thread insert.

Model No. SEA VS301.15

Ø6mm Video Borescope - Articulated

Model No. SEA TRMK

Model No. SEA TRM5

Ø5.5mm Camera Tablet Video Borescope

Probe storage

• Portable articulated borescope supplied with 70mm TFT colour display.

• Mini waterproof (IP67) camera with integral light (Ø6mm) mounted on 800mm flexible 2-way articulated probe.

• Using an attached dial, the camera head angle can be changed by up to 350˚ without having to remove camera from inspection area.

• Using 8GB micro SD card (supplied) up to 9hrs of video and 20000 still images can be recorded.

• Videos and still images can be downloaded to a PC via USB data cable (supplied).

• CMOS camera with six LED probe light and a focus distance of 20-50mm for fine control of light output and clear pictures.

• Potential applications; automobile maintenance, engine inspection, Model No. pipe line exploration etc.

• Powered by four x AA (not included).

SEA VS8233A

• High performance pistol grip borescopes with 85mm colour TFT screen and waterproof probe pod with IP67 rating.

• Features video record/playback, still images and stream live video via the AV out connection.

• Videos and images are stored on a 4GB micro SD card (supplied) allowing up to 4.5 hours of video and 10,000 images, which can be transferred to a PC via the USB connection.

• Also features digital zoom control and rotate/flip control of image.

• Powered by Lithium-ion battery pack giving up to 4 hours continuous use.

• AV and USB cables supplied.

Camera:

Ø3.9mm Camera Probe for VS8230, VS8231 & VS8232

or

SEA VS8231

SEA VS8232

Ø5.5mm

Ø3.9mm

Optional Probes:

ü

ü

Viewing Angle:

60°

80°

Pod Length: Camera Probe Length: Adjustable Light Control: Screen Resolution: Mirror Flip/Rotate Function:

30mm

20mm

1000mm

1000mm

ü

ü

320 x 240

320 x 240

ü

ü

8231 Model No. SEA VS

Video Borescopes

• Large 110mm TFT screen and tablet design makes the image incredibly clear but also very portable.

• Includes the added advantage of probe storage inside the rear of the case so no additional storage required.

• Features controls for light intensity, digital zoom and image rotation.

• Waterproof probe pod with IP67 rating and supplied in storage pouch.

Model No. • Powered by 4 x AA batteries (supplied).

SEA VS8223

• Ø3.9mm Borescope probe with 320 x 240 camera resolution.

• Waterproof probe pod with IP67 rating.

• Features lighting LEDs for a clear image in dark areas.

• Small enough to fit into a diesel combustion chamber through the glow plug hole.

• Use with Model No. VS8232, optional for Model No’s VS8230 and VS8231.

Model No. SEA VS8239

16 35535_Intercars Summer 2020 48pp (english).indd 16

28/02/2020 13:33:56

Workshop Timing Light

Exhaust Adaptor for Twin Pipes

Exhaust Spring Clamp Removal Tool VAG

• Composite cased Xenon timing light with inductive impulse pick-up.

• 8000rpm maximum.

• Supplied with 1.5m coiled 12V power supply lead, inductive coupler and operating instructions.

• Features soft rubber cylindrical exhaust pipe cones to suit most vehicles.

• Allows exhaust fume extractor to be used on twin exhaust vehicles.

• Suitable for use with EFS07 Exhaust Fume Extractor.

• Extractor Connector: Ø65-90mm Male Taper.

• Robust steel tool for the safe removal and installation of exhaust-to-manifold spring clamps.

• Applications: Audi, Seat, Skoda, VW.

Model No. SEA TL84

Model No. SEA EFS07DE

Model No. SEA VS1638

350ml Oil Inspection Syringe

3pc Fluid Transfer Syringe Set

Clutch Alignment Tool - Land Rover

• Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials.

• Translucent body allows easy inspection of oils and fluids.

• Includes twist shut-off valve to stop fluid escaping.

• Fluid Compatibility: AdBlue®, Antifreeze, Brake Fluid, Model No. Diesel, Oil, Water.

• Three multipurpose syringes with Viton® seals, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials.

• Set contains two suction syringes with collection bottles and a traditional suction/pump syringe with fluid shut-off valve.

• Fluid Compatibility: AdBlue®, Antifreeze, Brake Fluid, Diesel, Model No. Oil, Water.

SEA VS408 • Syringe/Bottle Capacity: 0.35/1L.

• Double end tool for aligning the clutch plate when fitting the clutch cover on Land Rover vehicles.

SEA VS407

Vacuum Tester & Brake Bleeding Kit

• Multifunction diagnostic tool used to test a variety of essential engine and associated functions.

• Also includes reservoir, hoses and adaptors for bleeding brake and clutch systems.

• Brass-bodied vacuum pump with easy-to-read vacuum gauge.

• Contents: Vacuum Pump, Fluid Container, Transfer Cap, Vacuum Hoses; 2 x 560mm, 4 x 80mm, Model No. 5 x Assorted Vacuum Hose Fittings, 3 x Bleed Nipple Adaptors.

SEA VS402

Brake Fluid Tester - Electrolytic

• Comparative electrolytic type tester.

• Checks moisture content of fluid by resistance to electric current.

• Easily calibrated using new brake fluid.

• Audible test cycle with three LED read-out.

• Just insert probe and press button for immediate result.

• Works on DOT 3, 4 and 5.1 specification fluids.

• Powered by a 9V battery (not included).

Model No. SEA VS027

Model No. SEA VS713

Pocket Brake Fluid Tester

• Integrated circuitry checks moisture content of fluid by measuring the electrical resistance and comparing it with acceptable limits.

• Easy calibration check using water.

• Five LED read-out.

• Just switch on and insert probe for immediate result.

• Works on all grades of brake fluid.

Model No. • Powered by one AAA SEA VS0274 battery (supplied).

17 35535_Intercars Summer 2020 48pp (english).indd 17

28/02/2020 13:33:58

1L Chemical Sprayer

5L Transmission Oil Filling System

• Ideal for use with some brake cleaners, detergents, traffic film remover, penetrating oils and weed killer.

• Adjustable nozzle enables easy and direct application of liquid exactly where it is required.

• Viton® seals allow use with a wide range of semi volatile chemicals that would deteriorate standard seals.

• A compatibility document is available.

Model No. SEA TP01

Pump operated oil dispensing unit with a five litre capacity.

Ideal for filling manual transmissions and differentials.

Supplied with 100° hooked metal and flexible adaptors.

Features a fluid shut-off valve to prevent accidental spillage.

Includes a pressure gauge.

Model No. SEA VS70096

1L Pneumatic Vacuum Brake Bleeder

• • • • •

• • • • •

The simple way to bleed hydraulic brakes.

One-person operation.

No special reservoir caps required.

Uses regular 90psi air supply.

Supplied with complete operating instructions.

Model

No. SEA VS020

Pneumatic Brake Bleeder

• One-person professional pneumatic brake bleeding tool.

• Pressure range makes unit suitable for use with ABS systems.

• Reservoir holds 3 litres, plenty to flush a whole system without the risk of running dry.

• Two drainage method options allow you to drain brake fluid via the brake caliper with the bottle option for replenishing, or brake reservoir pressurising for full brake bleed.

Model No. SEA VS0215

Brake & Clutch Bleeder

Brake & Clutch Bleeding System

• Bleeding requires no external power source.

• Design incorporates pressure control valve set at 20psi.

• Pressure range makes unit suitable for use with ABS systems.

• Fitted with Ø45mm cap which is suitable for most European models.

• Capacity: 400ml.

• One-person brake and clutch bleeding the professional way. Bleeding requires no external power source.

• Reservoir holds 2.5L of hydraulic fluid - flush the entire system with one fill, without the risk of running the reservoir dry.

• Pressure range makes unit suitable for use with ABS systems.

• Fitted with Ø45mm cap with 90° angled connector which is suitable for most European models.

• For other applications, order optional Brake Reservoir Cap 45mm Straight Connector - Model No. VS820SA, Universal Adaptor - Model No. VS820UA and Bleeder Cap Set - Model No. VS0204B.

Model No. SEA VS820

Model No. SEA VS1205

45mm Brake Reservoir Cap Straight Connector

Brake & Clutch Bleeding System Universal Adaptor

• For use in conjunction with Model No's VS820, VS821 & VS0204A Brake & Clutch Bleeding System.

• Brake reservoir cap Ø45mm with straight connector.

• Universal reservoir cap for Model No’s VS820, VS821 & VS0204A Brake & Clutch Bleeding System.

• Supplied with quick connect.

Model No. SEA VS820SA

Model No. SEA VS820UA

18 35535_Intercars Summer 2020 48pp (english).indd 18

28/02/2020 13:34:01

On-Vehicle Brake Pipe Flaring Tool

On-Vehicle Hydraulic Brake Pipe Flaring Kit

• Produces accurate automotive SAE and DIN flares on common sizes of brake pipe.

• Small body is suitable for on-vehicle applications.

• Ideal for splicing in replacement sections of brake pipe for repair or after accident damage.

• Use with ratchet and socket or standard spanner.

• • • •

Model No. SEA PFT08

Produces accurate automotive SAE and DIN flares on 3/16", 4.75mm, 5mm and 6mm brake pipes.

Ideal for splicing in replacement sections of brake pipe.

Powerful, lever operated hydraulic ram makes it suitable for steel pipes.

Model No. Features quick release chuck, twist lock die block housing for fast assembly SEA PFT15 and rotating hydraulic pipework to give easy access in confined spaces.

Brake Pipe Flaring Tool Turret Type

• Produces accurate automotive double flares on most common sizes of brake pipe.

• Cam-action body mounts in bench vice for ease of use.

• Supplied with 4.75mm, 3/16", 1/4", 5/16" and 3/8" dies and 4.75mm, 3/16", 1/4", 5/16" clamp blocks for forming most popular flares.

• Optional 3/8" clamp block available.

3pc 1/2"Sq Drive Brake Caliper Socket Set

Model No. SEA PFT07

4-in-1 Automotive Deluxe Pipe Bender

• • • •

Twin handles provide even force for accurate pipe forming.

Slender design allows pipes to be shaped in situ.

Ideal for aluminium, brass, copper and steel pipe.

Contoured vinyl grip handles provide extra comfort and control.

Brake Pipe Straightening Tool • Brake pipe straightener designed for use on automotive applications.

• This unique design is fast and easy to use.

• Suitable for 3/16"(4.76mm) cupro-nickel, copper and steel pipe.

• Features hole for marker pen.

Model No. SEA VS5056

• Chrome Vanadium steel 1/2"Sq drive sockets.

• Suitable for the adjustment and installation of Bendix and Girling brakes.

• Supplied in case for ease of storage.

Model No. SEA VS0460

Brake Pipe Bender

Model No. SEA VS0346

• Compact design for bending automotive brake pipes without crushing the pipe walls.

• Rigid construction makes it suitable for steel pipes.

• Will bend Ø3mm(1/8"), Ø4.75mm(3/16") and Ø6mm(1/4") pipe up to 90°.

Model No. SEA VS5055

Brake Wind-Back Tool - Low Profile VAG

• Enables retraction of the piston on rear brake calipers.

• Helps prevent damage to pistons and seals.

• Special low profile design for VAG vehicles.

Model No. SEA VS0245

19 35535_Intercars Summer 2020 48pp (english).indd 19

28/02/2020 13:34:03

21pc Brake Piston Wind-Back Tool Kit

4-in-1 Cylinder Hone Kit

• Suitable for push-back and wind-back brake pistons.

• Includes left and right-handed thrust bolt assemblies, reaction plate, hex bits and adaptors and includes the three pin VAG adaptor.

• Supplied in storage case.

• Four cylinder-honing tools in one kit covering 18mm to 89mm cylinder bores.

• Suitable for honing and de-glazing car brake and clutch cylinders plus motorcycle, outboard and lawnmower engine cylinders.

• Adjustable honing pressure and flexible drive shaft.

• Supplied in storage case.

Model No. SEA VS0282

11pc Brake Caliper Socket and Bit Set

Model No. SEA VS029

5pc 1/2"Sq Drive Brake Caliper Socket Set

• Comprehensive Range of Chrome Vanadium Hex Keys and Square Ribe Splined Sockets.

• Suitable for VAG, BMW, Ford and Mercedes vehicles.

• Contents: Hex Keys; 7, 9, 11mm, Hex Adaptors; 7, 8, 9mm, and Square Ribe Spline Sockets; 11.5, 15, 20, 22mm.

• Chrome Vanadium steel 1/2"Sq drive sockets.

• Updated set contains pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes.

• Socket Sizes: 10, 12.5, 14, 19mm.

• Socket Bit Size: 10mm.

Model No. SEA VS0322

Model No. SEA VS0464

Rear Brake Piston Wind-Back Adaptor VAG

Triple Leg Cylinder Hone

• Adaptor enables retraction of the piston on rear brake calipers when used in conjunction with a traditional wind-back tool with a two-pin adaptor mounting.

• Applications: Model No’s. VS0211, VS0240, VS0243, VS028, VS0282, VS0285, VS0286, VS0287.

• Three-pin design suitable for VAG vehicles.

• Flexible drive shaft and adjustable cutting control.

• Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from Ø25 to 64mm.

• Suitable for small and medium sized brake cylinders.

Model No. SEA VS02821

8 x 9mm Double End Brake Bleeder Spanner

10 x 11mm Double End Brake Bleeder Spanner

• Specially designed caliper bleed nipple spanner simplifies brake bleeding.

• Fitted with neoprene rubber seals which stops air being put into the system.

• Colour-coded for easy size identification.

• Spanner includes 8 & 9mm.

• Sizes 10 & 11mm available Model No, VS4512.

• Specially designed caliper bleed nipple spanner simplifies brake bleeding.

• Fitted with neoprene rubber seals which stops air being put into the system.

• Colour-coded for easy size identification.

• Spanner includes 10 & 11mm.

• Sizes 8 & 9mm available Model No. VS4511.

Model No. SEA VS4511

Model No. SEA VS023

Model No. SEA VS4512

20 35535_Intercars Summer 2020 48pp (english).indd 20

28/02/2020 13:34:06

Brake Disc Run-Out Kit

0-50mm Brake Disc Caliper

• Check for ball joint wear and brake disc run-out quickly and easily.

• Locking pliers secure to any convenient position, enabling DTI gauge to be placed against brake disc.

• Kit includes Metric calibrated DTI gauge.

• Stainless steel caliper suitable for accurate measurement of brake disc thickness.

• Floating jaw assembly enables easy removal of caliper from disc while retaining reading.

• Metric scale with 0.1mm graduations.

• Supplied in storage case.

Model No. SEA VS0290

M9 x 1.25mm Thread Insert for VS0462 Pack of 10

• Thread inserts for Model No. VS0462 Brake Caliper Thread Repair Kit.

Brake Spring Washer Pliers

Model No. SEA VS056

Caliper Cleaning File

• Designed to aid installation and removal of brake shoe retaining spring washers, found in drum brake assemblies.

• Spring loaded, offset jaws enable easy access to spring washer located behind wheel hubs.

Model No. • Suitable for cars and light SEA VS0362 commercial vehicles.

• Designed for removing corrosion, brake dust and road dirt from the brake pad carrier prior to fitting new pads.

• Double-sided blade features medium and coarse grooves.

• Length: 270mm.

0-45mm Brake Disc Caliper

150mm/6" Digital Brake Disc & Drum Caliper

2pc Brake Pipe Ratcheting Spanner Set

• For quick and accurate measurement of brake disc thickness.

• Long body design, allows use on some vehicles without the need to remove the wheel.

• Spring action plunger, allows quick operation.

• Suitable for motorcycles, cars and commercial vehicles.

• Metric scale with 1mm graduations.

Model No.

• • • • •

Measures disc thickness (external) and small drums (internal).

Hardened and tempered stainless steel gauge.

11mm High figures in LCD display for ease of reading.

Zero setting control allows for comparative measurement.

Supplied with calibration certificate and storage case.

• Range: 0-150mm(0-6").

Model No. • Battery: SR44 - 1.5V.

• Manufactured from Chrome Vanadium steel with a fully polished satin finish.

• Features 72-tooth ratchet with flexi-head for limited access applications and fixed head for initial loosening of the nut.

• Ideal for most brake pipe fittings.

Composite Hose Pinch Tool Small for Brake/Fuel Hoses

Composite Hose Pinch Tool Medium for Heater Hoses

2pc Auto Lock 45° Hose Pinch Tool Set

• Smooth rounded jaw edges prevent damage to internal hose reinforcement.

• Quick and simple - one handed use.

• Made from durable glass reinforced nylon.

• Smooth rounded jaw edges prevent damage to internal hose reinforcement.

• Quick and simple - one handed use.

• Made from durable glass reinforced nylon.

• Smooth rounded jaws prevent damage to internal hose reinforcement.

• Auto locking mechanism for one-handed operation.

• 45° Angle jaw for use in restricted spaces.

• Size/Maximum Jaw Opening: Model No. Small/29mm, Large/42mm.

Model No. SEA VS0462R

SEA VS0571

Model No. SEA VS030

SEA VS0566

Model No. SEA VS031

Model No. SEA VS0391

Model No. SEA VS0356

SEA VS0500

21 35535_Intercars Summer 2020 48pp (english).indd 21

28/02/2020 13:34:09

Hose Removal Pliers

Hose Clamp Pliers Angled

430mm Hose Clamp Pliers Double Jointed

• Easily disconnects hoses by firmly gripping the lines/tubes.

• Especially suitable for hoses connected to lines/tubes with a smooth surface where a pushing force is not possible.

• Pointed jaw tip allows access in confined spaces.

• Locking design enhances secure gripping and allows single handed operation.

• Suitable for 3/16"(5mm), 1/4"(6mm), and 3/8"(10mm) lines and tubes.

• Specially designed jaws give excellent grip onto a wide range of vehicle hose clamps.

• 35° Angled head allows access into tight areas in the engine bay.

• Clever spring loaded locking function allows use one-handed.

• Jaw capacity: 100mm.

• Length: 275mm.

• Specially designed jaws give excellent grip onto a wide range of vehicle hose clamps.

• 430mm Double jointed feature gives a long reach, allowing easy access into places like bottom radiator hoses.

• Clever spring loaded locking function allows use one-handed.

• Jaw capacity: 65mm.

Model No. SEA VS1655

Model No. SEA VS1677

Interchangeable Remote Action Hose Clamp Pliers

Model No. SEA VS1675

Remote Action Hose Clip Tool

• Long reach tool designed for awkwardly positioned tag-type hose clips.

• Flexible cable and compact head help operation in confined spaces.

• Three interchangeable heads.

• One cable for standard hose clamp 670mm long and 3-52mm opening.

• One cable for Clic-R® Type clamp 635m long and 0-24mm opening.

• One cable for dual-sided clamp for spring type and truck hose clamp, 670mm long and 0-75mm opening.

• Long reach tool designed for awkwardly positioned tag-type hose clips.

• Flexible cable and compact head help operation in confined spaces.

• Features ratchet action and vinyl dipped handles for comfort and close control.

Model No. SEA VS1663

Smoke Diagnostic Tool Leak Detector

2pc Hose Clip Pliers Set

• Heavy-duty construction with PVC dipped handles for added comfort and grip.

• Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips.

• Pliers with ratchet locking mechanism for ease of use on lower radiator hoses.

• Swivel jaws allow use where access is confined.

• Length: 220mm.

Model No. SEA VS1665

Air Conditioning Leak Detection Kit

• Allows the technician to pinpoint all manner of system leaks including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems.

• Fast and simple to use, maximising earning potential.

• Features single button operation, flow control valve and auto power off.

• Uses mineral oil and workshop air to generate smoke at low pressure while connected to a vehicle.

• System is clean and quick to use and connects to a 12V vehicle battery.

• Rubber Cones Sizes (Ø): 10-45, 30-65, 50-85, 70-100mm.

• Mineral oil not supplied.

Combustion Leak Detector • Diagnose blown gaskets, cracked blocks and cylinder heads on both petrol and diesel vehicles.

• Checks for CO2 in cooling system and indicates its presence by test fluid colour change.

• Use with cone adaptor or in conjunction with radiator caps from Model No’s VS001, VS0011, VS0013, VS0014, VS0033 and VS006.

• For Test Fluid Refill order Model No. VS0061F.

Model No. SEA VS1678

Model No. SEA VS870

• Find leaking hoses and joints in vehicle R134A air conditioning systems fast.

• Supplied with rugged 12V ultraviolet lamp and dye injector system for use in conjunction with any air conditioning recharge/recycle station.

• Includes ten single doses of fluorescing dye and UV enhancing spectacles for use in normal workshop lighting conditions.

Model No. • Supplied with hose adaptors, comprehensive operating instructions and storage case.

SEA VS600

Combustion Leak Detector

Model No. SEA VS0062

• Diagnose blown gaskets, cracked blocks and cylinder heads on both petrol and diesel vehicles.

• Checks for CO2 in cooling system and indicates its presence by test fluid colour change.

• Use with cone adaptor or in conjunction with radiator caps from Model No’s VS001, VS0011, VS0013, VS0014, VS0033 and VS006.

• For Test Fluid Refill order Model No. VS0061F.

250ml Combustion Leak Detector Fluid

• Detector fluid refill for VS0061 & VS0062.

Model No. SEA VS0061

Model No. SEA VS0061F

22 35535_Intercars Summer 2020 48pp (english).indd 22

28/02/2020 13:34:13

6pc Alternator Freewheel Pulley Removal Set

18pc Alternator Freewheel Pulley Removal Set

• Easy removal of freewheel pulley from alternator either on or off the vehicle.

• Allows alternator shaft to be held while the pulley retainer is removed.

• Applications: Audi, BMW, Citroen, Ford, Mercedes, Peugeot, Porsche, Renault, Skoda, Vauxhall/Opel.

• Enables easy removal of freewheel alternator pulley, either on or off the vehicle.

• Allows alternator shaft to be held while the pulley retainer is removed.

• Incorporates a complete range of combination TRX-Star**, spline and hex adaptors to fit most alternators.

4-Way Battery Post & Terminal Cleaner

• Removes heavy corrosion build-up on battery posts and terminals for improved electrical contact.

• Features clamp reamer and terminal scrapers.

10-120mm² Copper Lug Terminal Crimping Tool

• • • •

• Professional battery hydrometer.

• Float gauge and thermometer built-in.

Model No. SEA AK418

12V Battery & Alternator Tester LCD Screen

• LCD display verifies the condition of battery and alternator output.

• Suitable for 12V DC systems and connects to vehicle via the vehicle accessory power socket.

• Fitted with 250mm cable and powered by connection to vehicle.

Battery Fluid Tester - Tube Type

Model No. SEA AK500

Model No. SEA SX402

Copper lug terminal tool Crimp range 10-120mm² BS Standard type terminal.

Made from SCM40 hard tool steel.

Model No. SEA AK414

12V Digital Battery & Alternator Tester

• Compact device which accurately tests battery, cranking and alternator.

• No heat, no sparks and no misdiagnosis.

• Just key in the battery rating from the top of the battery and results are displayed on LCD screen.

• Includes a facility to print results via PC. • No internal battery and will test batteries with a residual charge of just 8V.

IR & RF Key Fob Tester

• Detects radio frequency and/or infrared emission from key fobs and remote controls.

• Diagnose faults quickly and easily without the need to dismantle the fob, remote or vehicle.

• Suitable for a wide variety of vehicle manufacturers.

• Detects new BMW frequencies.

• Powered by 9V battery (not included).

**TRX-STAR, TRX-TS and TRX-P tools are suitable for driving TORX® and TORX PLUS® fasteners respectively. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.

Model No. SEA SX400

Model No. SEA AK120B

Printing Roll for BT2012.V2 Pack of 2

• Suitable for Model No. BT2012.V2 and other leading brands of battery tester.

Model No. SEA BT105

Model No. SEA BT2012.V2-01

Air Conditioning System Manifold with Sight Glass • Test for variations in high and low pressure sides of vehicle air conditioning systems.

• Suitable for R134a and R12 applications.

• Lightweight, aluminium block design with sight glass.

• Easy-to-read large anti-flutter gauges.

• Professional service couplers (colour-coded and labelled).

• Three colour-coded charging hoses and a hanging hook to allow hands-free use.

Model No. SEA VS921

Model No. SEA VSAC002

23 35535_Intercars Summer 2020 48pp (english).indd 23

28/02/2020 13:34:15

100A Combined Battery Support Unit & Charger

92pc Test Lead Set

• Professional combined battery support unit and charger designed to supply power for prolonged use during vehicle software updates or for showroom demonstration.

• High frequency power supply utilises a microprocessing CPU controller when charging a battery and providing support during electronic diagnostic checks.

• Up to 100A supply at 13.5V/14.5V & 14.8V. • Designed for use with lead-acid batteries including WET, GEL and AGM types on 12V systems.

• Includes a function to recharge a deeply discharged battery.

• Safety circuitry which includes reverse polarity protection, Model No. short circuit protection, overload protection and the SEA BSCU100 detection of voltage errors.

Diagnostic Socket Memory Safe EOBD

Model No. SEA TA111

Jumper Test Lead Set - 5 Pairs x 450mm

• Attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicle’s own battery is disconnected.

• Features LED to indicate back-up battery power supply status.

• Saves valuable time spent Model No. re-programming lost codes.

SEA VS2072

8 Function Hi-Vis Digital Multimeters with Thermocouple • Features data hold function, temperature probe and diode test facility.

• Housed in rugged rubber boot with integral stand.

• Supplied with full set of leads and probes.

• Measures: AC and DC Voltage, DC Current, Resistance, Temperature, Audible Continuity, Diode/Transistor Verification Mode.

Model No.

Colour Yellow

SEA MM20 SEA MM20HV

• Comprehensive set of test leads and components suitable for testing, isolating and evaluating automotive electronic circuits.

• Includes standard Ø4mm banana style plugs and sockets suitable for use with most diagnostic multimeters and test equipment.

• Supplied in sectioned storage case for quick location of components.

Hi-Vis Green

Digital Insulation Tester • Specially designed for testing insulation on high voltage cables.

• Supplied with test leads, batteries and carry-case.

• Conforms to EN61010 CAT III (1000V).

Model No. SEA TA319

• Five pairs of coloured cables.

• Each cable has shrouded crocodile clips at each end.

• Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.

Model No.

SEA VS222

Digital Automotive Analyser/Insulation Tester - Hybrid Vehicles

• Specially designed for hybrid vehicles and conforms to EN61010 CAT III (1000V) and CAT IV (600V).

• Unlike other multimeters this unit has an insulation test function that allows testing of the insulation of the high voltage wires found on hybrid vehicles.

• Can be used as a stand-alone device or linked wirelessly with a USB interface to a PC or laptop enabling results to be graphed, saved or printed.

• Supplied with high voltage probes, thermocouple and wireless USB cable.

• The unit also has the usual functions expected on a high quality multimeter including true RMS (Root-Mean-Square) and Model IP67 waterproof rating.

No. SEA TA320

Professional Auto-Ranging Digital Multimeter

• Lightweight, auto-ranging digital multimeter with double moulded plastic housing and a 2000 counts LCD display.

• Features forward facing work light, data hold and non-contact voltage detection.

• Conforms to EN 61010-1 CATIII 1000V/CAT IV 600V safety standard.

Ratchet Crimping Tool Insulated Terminals

• All steel construction with large comfort grip handles and plate stamped jaws.

• Ratchet action ensures consistent crimping.

• Terminal Suitability: Model No. 0.5-1mm², 1.5-2.5mm², 4-6mm².

SEA AK385

5-in-1 Digital Multimeter

• Five-in-one digital multi-tester has been designed to combine the functions of Sound Level Meter, Light Meter (Lux), Humidity Meter, Temperature Meter and Digital Multimeter.

• Conforms to IEC-1010 and CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use.

• Features integral upright stand, auto and manual range selection, data hold, relative measurement, auto power off function, LCD display and back light.

• Supplied with test probes Model No. and thermocouple.

SEA TM104

Professional Auto-Ranging Digital Multimeter • Lightweight, compact digital multimeter with double moulded plastic housing and a 4000 counts LCD display.

• Drop-proof up to 2m.

• IP65 rated as “dust tight" and protected against low pressure water jets (all directions).

• Features display back light and forward facing work light.

• Conforms to EN 61010-1 and EN 61010-2-033 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use.

Model No. SEA MM102

Model No. SEA MM104

24 35535_Intercars Summer 2020 48pp (english).indd 24

28/02/2020 13:34:19

3-48V Integrated Test Light/Voltmeter

• Identifies polarity of circuit being tested on LCD display, red for positive and green for negative.

• LCD meter draws minute currents making this tool safe to use around delicate electronic components.

• With a range of 3-48V DC, this tool is suitable for motorcycle, car, hybrid and commercial vehicles.

• Supplied with 3m coiled cable and Model No. insulated crocodile earth clamp.

SEA AK4012 • Do not use on air bags.

6-24V Circuit Tester

6/12/24V Circuit Tester with Test Light

Suitable for 6-24V DC circuits.

Knurled brass body with test light.

Probe tip is covered with protective brass screw cap.

Tester illuminates when voltage is present.

Model No. • Supplied with cable and SEA AK4008 alligator earth clip.

• Suitable for testing 6, 12 and 24V DC circuitry.

• Insulated, pointed probe tests through wire insulation.

• Supplied with 1.5m cable and crocodile earth clamp.

• • • •

AC/DC Clamp Meter & Multimeter

6-24V Auto Probe with 4.5m Cable

• Designed for the automotive electrician and conforms to EN61010 CAT III 600V. • Ideal for measuring current draw from vehicle components in situ.

• Features 10mm clamp.

• Supplied in pouch.

• Fitted with 4.5m cable allowing access to the rear of the vehicle.

• Just some of the tests, which can be done quickly and efficiently, on systems from 6V up to 24V: - Cooling fan motors - Fuel pumps - Window/Sunroof motors - Relays and Lamps - Wiper motors

Model No. SEA TA305

0-50V Automotive Wire Piercing Test Lead Probes

• Fully insulated probes have a spring loaded clamp.

• Stainless steel pin self-centres and punctures the insulation.

• Fitted with Ø4mm banana style connectors.

• Maximum Wire Size: Ø3.5mm.

• For automotive use only, Model No. with a maximum input of 50V DC. SEA TA114

0-30V Power Scope Automotive Probe

Model No. SEA PP1

2pc Lightweight Front Seat Protector Set

• Set includes two reuseable front seat covers.

• Manufactured from water resistant lightweight nylon.

• Ideal for protecting the vehicle’s interior from dirt, grease and oil, as well as food and drink spills.

• Suitable for most cars and light commercial vehicles.

• Can be fitted to seats with or without airbags.

Model No. SEA CSC5

• One of the most advanced automotive probes on the market, with a huge range of functions for effective automotive diagnostics, making short circuits and bad earths easy to find.

• Features a scope function to visually test component signals, with the added benefit of maximum/minimum volts, frequency and duty cycle displayed.

• Allows components to be activated in situ or prior to installation.

• The fly lead allows continuity and polarity testing with a high-contrast colour LCD display giving a 7mm high read-out.

• Features an audible continuity and positive/negative voltage indicator.

• Two integral work lights.

• 6m Lead connects to the battery supply and reaches to all areas of the vehicle.

• Includes a vehicle accessory socket adaptor and 6m extension cable.

Model No. SEA PP100

Windscreen Cutting Wire - Braided

Windscreen Cutting Wire - Square

• Braided stainless steel wire suitable for use with wire grips.

• Use a sawing action to cut through the urethane bond.

• Length: 22.5m.

• Becoming more popular than braided wire.

• Stainless steel square profile has four cutting edges.

• Fast and easy cutting of urethane bond even in cold conditions.

• Length: 22.5m.

Model No. SEA WK0513

Model No. SEA AK402

Model No. SEA WK0514

7pc Windscreen Removal Tool Kit

• Reinforced composite handles with heat treated chromed steel shafts.

• A complete tool kit for the removal of bonded and rubbered screens.

• Handles include hanging eye for storage.

Model No. SEA WK3

25 35535_Intercars Summer 2020 48pp (english).indd 25

28/02/2020 13:34:22

Front Wheel Bearing Puller - Ford Transit

Lower Ball Joint Socket Peugeot 405/Citroen

2pc Lower Ball Joint Socket Set

• Engineered for safe, in situ removal of drive flange with wheel bearing/hub assembly and wheel bearing from drive flange.

• Essential tool when replacing brake discs allowing the drive flange to be split from the hub assembly.

Model No. • Features a cleverly designed SEA VS2386 impact force screw.

• Heat treated alloy steel socket.

• 35mm Hex drive with Ø19mm internal clearance for OEM and non OEM fittings.

• Ø50mm Ring with drive pegs which locate in slots cut in Model No. the ball joint flange.

• Set of two heat treated alloy steel sockets.

• Suitable for removal of OEM and aftermarket lower ball joints.

• Applications: Citroen; Xantia, C5, C6, Peugeot; 405, 406, 407, 605, 607.

• Supplied in storage case.

Model No.

Universal Twin Camshaft Holding Tool

Diesel Engine Setting & Locking Kit VAG 1.4D, 1.6D, 2.0D Common Rail Belt Drive

Crankshaft Pulley Holder - Honda

• Designed to hold twin camshafts in their timed position by using sockets to locate onto the central camshaft fixings.

• Tool will hold the camshafts in position when replacing the timing belt or chain.

• Choice of adaptors gives a huge range of application Model No. coverage on many twin SEA VSE889 cam engines.

• Covers the new generation 3- and 4-cylinder common rail diesel engines.

• Includes the tools required for setting the camshaft drive gears within the cylinder head.

• Used to counter-hold the crankshaft pulley when loosening/tightening the pulley bolt.

• Short head design for use in confined spaces and on vehicles with a single crankshaft pulley.

• For use with 1/2"Sq drive breaker bar.

Model No. • Head Diameter: 50mm.

Auxiliary Belt Tensioner Spanner Set BMW Mini N12/N14/N16/N18 Chain Drive

Crankshaft Pulley Alignment Tool Ford B-Max 1.6 EcoBoost

Crankshaft Holding Tool - Citroen/ Peugeot/Toyota 1.0, 1.2 Petrol Engines

• Two piece spanner set covering both sizes of belt tensioner fitted to a wide range of BMW Mini engines.

• Slimline design for access where space is limited.

Model No. • Sturdy handle also has a SEA VSE6211 1/2"Sq drive if required.

• Crankshaft pulley alignment tool for Ford B-Max 1.6 EcoBoost engine.

• Ensures the crankshaft pulley is correctly aligned with the timing belt cover.

• Designed to counter hold the crankshaft pulley to release and tighten the centre bolt.

• Suitable for 1.0 and 1.2 Citroen, Peugeot and Toyota engines.

Crankshaft Turning Socket Audi 2.5 5-Cylinder - Chain Drive

Crankshaft Turning Socket - VAG

Crankshaft Pulley Holding Wrench VAG 1.8/2.0 TFSi - Chain Drive

• Crankshaft turning socket for Audi 5-cylinder petrol engines.

• Specially designed socket for turning the crankshaft on a wide range of 6- and 8-cylinder VAG engines.

• Essential tool required to counter hold the crankshaft pulley whist removing/tightening the crankshaft pulley bolt.

Model No. SEA VSE5026

SEA SX027

Model No. SEA VSE2090

Model No. SEA VSE5860

Model No. SEA VSE5058

SEA SX0271

SEA VSE5048S

Model No. SEA VSE5093

Model No. SEA VSE6237

26 35535_Intercars Summer 2020 48pp (english).indd 26

28/02/2020 13:34:24

Petrol Engine Timing Tool Kit - VAG 1.2, 1.4TFSi, 1.4, 1.6FSi - Chain Drive

1/2"Sq Drive Crankshaft Turning Socket Subaru/Saab 2.0/2.5

High Pressure Fuel Pump Sprocket Remover - Hyundai/Kia 2.5D

• Timing kit suitable for 1.2, 1.4TFSi and 1.4, 1.6FSi engines.

• Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking.

Model No. • Supplied in storage case.

• Crankshaft turning socket fits over the end of the crankshaft to enable the engine to be turned with any 1/2"Sq drive breaker bar or ratchet wrench.

• Specialised puller essential for the removal of the high pressure fuel pump sprocket.

Model No. SEA VSE5980

SEA VSE5950

Petrol Engine Timing Tool Kit - GM, EcoTec/EcoFLEX 1.4-2.2 - Belt Drive

• Timing tool kit suitable for GM 1.4-2.2 EcoTec/EcoFLEX petrol engines.

• Supplied with instructions in a convenient foam storage tray.

Model No. SEA VSE5932

53pc Diesel & Petrol Master Timing Tool Kit VAG - Belt/Chain Drive

• Master timing tool kit for VAG vehicles.

• Covers a wide range of petrol and diesel engines.

• Suitable for popular VAG vehicles from 1995 to present.

• Supplied in two high quality storage foams suitable for tool box drawers.

• Foam size: 560mm x 390mm x 45mm.

Model No. SEA VS4620

12pc Diesel Fuel Line Blanks Set

Model No. SEA VS5100MK

Diesel Engine Timing Tool Kit 1.2D, 1.4D, 1.6D, 2.0D - VAG, Ford & Mitsubishi - Belt Drive

• Set of twelve diesel fuel line blanks, mainly fitted to Ford, PSA and Renault.

• Contains six pairs of male and female connectors covering three connector types.

• Ideal for stopping the flow of fuel after pipework Model No. has been disconnected.

SEA VS557

• Master timing tool kit for a wide range of VAG, Ford and Mitsubishi diesel engines.

• Suitable for 3 and 4 cylinder belt drive engines.

• Includes oil pump and belt tensioner locking pins.

Model No. SEA VSE2092

Vibration Damper/Pulley Puller Ford 2.0 TDCi EcoBlue Engine

Mercedes 9G-Tronic Automatic Gearbox Oil Filler Set

• Suitable for Ford Transit fitted with EcoBlue 2.0 TDCi engine.

• Equivalent to OEM 205-295 and Model No. 204-158-01 (crankshaft end protection spigot).

SEA VSE6542

• Suitable for 9G Tronic 725 series gearboxes fitted to Mercedes E350 Bluetec (2013on) and CLS models (2014on).

• Contains a socket wrench to adjust oil level and a quick release coupling.

• Designed for drain and Model No. refilling operations.

SEA VS589

Crankshaft Sensor 4mm Ball Hex Key 80mm Long Reach - VAG

• Crankshaft sensor hex key 80mm long reach.

• Chrome Vanadium 4mm ball hex key.

• Fits a wide variety of VAG vehicles

Model No. SEA VS0584

27 35535_Intercars Summer 2020 48pp (english).indd 27

28/02/2020 13:34:28

Petrol Engine Timing Tool Kit - Audi 2.5 TFSi Chain Drive

Diesel Engine Timing Tool Kit - Land Rover, Range Rover 3.6D Chain Drive

• Suitable for Audi five cylinder 2.5 chain drive petrol engines.

• Contains the essential tools required to set and lock the engine.

• Includes a camshaft adjuster turning socket and a crankshaft turning socket.

• Supplied in a storage case with instructions and a warning tag.

• Setting and Locking kit for Range Rover L320 and L322 V8 3.6D. • Kit includes a flywheel locking plate and camshaft rotating pin.

• Supplied in a storage case.

Model No. SEA VSE5025

Petrol Engine Service Kit - Ford/Volvo 2.5 Belt Drive

Timing Tool Kit - VAG 1.2, 1.4TFSi, 1.4, 1.6FSi Chain Drive

• Includes a camshaft holding tool which is essential for holding the camshaft when checking the valve clearances, and a crankshaft front oil seal installer.

• Timing kit suitable for 1.2, 1.4TFSi and 1.4, 1.6FSi engines.

• Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking.

• Includes guide pins for aligning the supercharger.

• Supplied in storage case with instructions and a warning tag.

Model No. SEA VSE7680

Model No. SEA VSE5010

Model No. SEA VSE5988

Balance Shaft Locking Kit - Citroen, Ford, Jaguar, Land Rover 2.2D - Belt Drive

Timing Chain Tool Kit - Petrol/Diesel

• Contains the essential tools for setting and locking the balance shafts on 2.2 belt drive diesel engines fitted in Jaguar, Land Rover, Ford and Citroen vehicles.

• Timing chain splitting and fitting tool kit.

• Enables timing chain replacement with the minimum of engine dismantling.

• Suitable for Mercedes chain drive engines, and some Chrysler & Jeep applications.

Model No. • The kit includes tools to split the chain and also the temporary SEA VSE4802 chain links required to fit the new chain.

Model No. SEA VSE3029

Petrol Engine Timing Tool Kit - Audi 4.2 V8 Chain Drive

Petrol Engine Timing Tool Kit - Mercedes 1.6/1.8 M271 Chain Drive

• Kit includes camshaft setting plates, camshaft positioning sensor alignment tools and crankshaft locking pin.

• Supplied in a storage box with warning tag and comprehensive instructions.

Model No.

• Includes timing chain tensioner wedge to release the oil pressure from the hydraulic timing chain tensioner.

• A timing chain tensioner drift is provided to refit the blanking plug back into the crankcase after removing the chain tensioner.

Model No. • A star bit is provided to remove the camshaft sprocket SEA VSE4816 fixing bolts.

SEA VSE7407

28 35535_Intercars Summer 2020 48pp (english).indd 28

28/02/2020 13:34:31

Diesel Engine Timing Tool Kit - BMW, BMW Mini 1.5D, 1.6D, 2.0D, 3.0D - Chain Drive

Petrol Engine Timing Tool Kit - BMW, BMW Mini 1.2/1.6/2.0 Chain Drive

• Essential tools for timing the BMW, BMW Mini 1.5D, 1.6D, 2.0D and 3.0D chain drive diesel engines.

• Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool, also suitable for the new generation of modular engines.

• Kit also includes HP pump sprocket retaining tool required Model No. during pump removal/replacement applications on SEA VSE6121A N47/N57 engines.

• Fits the new generation of BMW modular petrol engines.

• Contains the tools required to set and lock the engine and for valve timing checking and adjusting.

Petrol Engine Timing Tool Kit - Jaguar, Land Rover 5.0 Chain Drive

Diesel/Petrol Engine Timing Tool Combination Kit - Ford, PSA Belt/Chain Drive

• Essential tools for setting and locking the engine during timing chain replacement.

• Contains camshaft turning tools, a flywheel locking tool and a timing chain pre-tensioner tool.

Model • Supplied in a storage case with instructions and a warning tag.

• Suitable for a wide range of belt or chain driven petrol and diesel engines.

• Contains a camshaft sprocket puller and flywheel locking tools.

• Supplied in a storage case with instructions and a warning tag.

Model

Petrol Engine Timing Tool Kit - Alfa Romeo, Fiat, GM, Saab - 1.4, 1.6, 1.8 Twinport - Belt Drive

Timing Tool Kit - VAG 1.4D, 1.6D, 2.0D Common Rail Belt Drive

• Comprises camshaft setting tools and belt tensioner locking pins.

• Suitable for timing applications on all 1.4, 1.6 and 1.8 Twinport petrol engines with belt drive.

• Covers the new generation 3- and 4-cylinder common rail diesel engines.

• Includes the tools required for setting the camshaft drive gears within the cylinder head.

No. SEA VSE3445

Model No. SEA VSE6122

No. SEA VSE5042A

Model No. SEA VSE5006

Model No. SEA VSE6281

Front Pivot Arm Bush Tool - Citroen C5/C6, Peugeot 407/508

Trailing Arm Bush Tool - Ford

• Suitable for the removal/installation of the front lower suspension pivot arm bush.

• Can be used in situ without removing the aluminium hub carrier from the vehicle.

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford Fiesta MkVI (08on).

• Can be used in situ without removing the arm from the vehicle.

• Also suitable for Mazda 2 MkIII (07-15).

Model

Model No. SEA VSE4785

No. SEA VSE4788

29 35535_Intercars Summer 2020 48pp (english).indd 29

28/02/2020 13:34:33

52pc Bearing Race & Seal Driver Set

Adjustable Press Support Plate

• Designed to be used with a standard workshop press.

• Adjustable diameter and six interchangeable support legs provide quick alignment of hub or suspension frame for secure and level pressing.

• Ideal when removing and installing wheel bearings and bushes.

Model No. • Operating Diameter: Ø78-100mm.

SEA VS7037

• Set of forty-nine square edged heavy-duty steel drivers.

• Sizes: 18-65mm (1mm increments), 74mm.

• Suitable for installation of bearings or seals without damaging the bearing, seal or housing.

• Adaptors can also be used in a standard workshop press.

Model No. SEA VS7032

Trailing Arm Bush Tool Ford Mondeo Mk IV

Trailing Arm Bush Tool Volvo, Ford

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford vehicles.

• Can be used in situ without removing the arm from the vehicle.

• Also suitable for some Volvo vehicles that share the same Model No. Ford platform.

SEA VSE4784 • Supplied in storage case.

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford/Volvo vehicles.

• Can be used in situ without removing the arm from the vehicle.

Model • Supplied in storage case.

No. SEA VSE4786

Trailing Arm Bush Tool Vauxhall/Opel

Diesel Engine Timing Tool Kit Dacia, Mercedes, Renault, 1.5D Belt Drive

Vibration Damper Holding Tool VAG 1.8/2.0 TFSi - Chain Drive

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Vauxhall/Opel vehicles.

• Can be used in situ without removing the arm from the vehicle.

• Features a slotted adaptor for visual reference while in Model No. operation.

• Essential tools for timing belt replacement on Dacia, Mercedes and Renault 1.5D dCi diesel engines.

• Supplied with a warning tag and instructions.

• Contains the essential tools required to maintain engine timing if the vibration damper has to be removed.

• Supplied in a storage case with full instructions.

Universal Press Support Block

Wheel Bearing Circlip Pliers - PSA

Water Pump Reaction Wrench - VAG

• Designed to be used with a standard workshop press.

• Multiple threaded holes in aluminium base plate enable the support bars to be installed in virtually any position, allowing the bearing or bush to be positioned horizontally.

Model No. • Includes a packing block for SEA VS7036 added versatility.

• Features specially designed tips for eyeless circlips, spring loaded jaws and vinyl dipped handles.

• Applications: Citroen C1; 1.0 Petrol, 1.4Hdi (05-15), Peugeot 107; 1.0 Petrol, 1.4Hdi (05-15), Renault Clio; Mk2 2.0 16V Model No. Sport (98-05), Toyota Aygo; SEA VS7040 1.0 Petrol, 1.4Hdi (05-15).

• Water pump reaction wrench suitable for VAG vehicles with three bolt water pump pulleys.

• Holds the pulley to assist with the removal of the fixing bolts.

• Handle includes 1/2"Sq drive to enable an extension to be Model No. fitted if required.

SEA VSE4787

Model No. SEA VSE4810

Model No. SEA VSE4251

SEA VSE4977

30 35535_Intercars Summer 2020 48pp (english).indd 30

28/02/2020 13:34:36

Master Locking Wheel Nut Removal Set

Blade C for SX299 - Pack of 10

• Simple to use master kit capable of removing practically any locking wheel nuts.

• Kit includes shroud, which protects the wheel against any damage.

• Very effective and a must have workshop tool.

• Replacement disposable blades available, Model No. SX299DB (Pack of 10).

• Designed for use on McGard locking wheel nuts.

• For use with Model No. SX299.

Model No. SEA SX299

8pc Strut Nut Set

Model No. SEA SX299DB

22pc Locking Wheel Nut Key Set Audi

22pc Locking Wheel Nut Key Set BMW

• Castellated Sockets: Drives; 15, 21, 22mm, Sizes (Internal Ø/Tooth Width); Ø10.5 x 3.5, 12.5 x 3, 12.5 x 3.5, 14 x 2.5, 14 x 5, 14.5 x 5mm.

• Ovals: 1/2"Sq Drive, Sizes Model No. (Internal Ø/Tooth Width): Ø7 x 5, 8.2 x 5.5mm.

SEA SX0331

• Set of twenty locking keys for the removal of locking wheel nuts on Audi vehicles.

• Adaptor can be used with either a 1/2"Sq drive or 21mm socket.

• Set includes drift to aid Model No. removal of key from adaptor.

SEA SX206

• Set of twenty locking keys for the removal of locking wheel nuts on BMW vehicles.

• Adaptor can be used with either a 1/2"Sq drive or 21mm socket.

• Set includes drift to aid Model No. removal of key from adaptor.

SEA SX207

10pc Locking Wheel Nut Key Set BMW & Mini

21pc Locking Wheel Nut Key Set BMW & Mini

23pc Locking Wheel Nut Key Set VAG

• Set of ten locking keys for the removal of security splined locking wheel nuts on BMW and Mini.

• Key Drive: 17mm Hex.

• Set of twenty keys for the removal of security spline and ribe locking wheel nuts on BMW and Mini.

• Includes 17mm wheel nut socket with 1/2"Sq drive.

Model No.

• Set of twenty-two keys for the removal of spline and security ribe locking wheel nuts on VAG vehicles.

• Includes 17mm wheel nut socket with 1/2"Sq drive.

Model No.

Model No. SEA SX208

SEA SX209

17mm 1/2"Sq Drive Wheel Bolt Security Socket - Honda/ Hyundai/Toyota

1/2"Sq Drive Alloy Wheel Impact Socket - Star Profile for Mercedes

• Manufactured from Chrome Vanadium steel.

• Seven-sided 17mm wheel bolt security socket suitable for Honda, Hyundai and Toyota vehicles.

• Star profile wheel nut socket which is now used on some Mercedes vehicles.

• Manufactured from Chrome Molybdenum with protective sleeve.

• Size: 17mm.

Model No.

Model No. SEA SX0177

SEA SX0417

SEA SX210

1/2"Sq Drive Extra-Long Spline Socket Bit M12 x 800mm

• • • • • •

Save valuable time and loosen drive shaft screws from the outside.

Suitable for VAG vehicles.

Hardened and tempered Chrome Vanadium steel socket.

Chrome plated with satin finish.

Model No. Knurled ring on socket to assist gripping with oily fingers.

SEA AK5537 S2 Steel spline bit extension with phosphate coating.

31 35535_Intercars Summer 2020 48pp (english).indd 31

28/02/2020 13:34:39

Single Barrel Foot Pump

Tyre Pressure Gauge with Clip-On Connector

• Steel framed foot pump with Ø50 x 120mm steel barrel.

• Dial type pressure gauge with rotating bezel.

• Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar.

• Fitted with 610mm of flexible pressure hose with clip-on type connector.

• Supplied with accessory for inflating items such as small Model No. inflatable boats, air beds SEA S0540 and balls.

Tyre Inflator with Clip-On Connector

• • • • •

• Robust gauge with protective rubber bumper.

• Supplied with clip-on connector.

• Scale: 0-7bar/0-100psi.

Heavy-duty extruded aluminium body and zinc head.

Linear pressure scale, dual calibrated in psi and bar.

0.5m Rubber hose with steel protection sleeve.

Range: 0-9.6bar(0-140psi).

Fitted with clip-on connector.

Model No. SEA TST/PG6

Tyre Inflator with Clip-On Connector

Tyre Inflator with Clip-On Connector

• Die-cast body and dial type gauge with rubber protector.

• Fitted with single clip-on connector.

• Range: 0-10bar(0-145psi).

• 1/4"BSP Air inlet.

• • • • •

Model No. SEA SA395

Tyre Inflator with 2.7m Hose & Clip-On Connector

Die cast body and dial type gauge with rubber protector.

Features a glow in the dark measuring scale.

Displayed in psi and bar.

Range: 0-7bar(0-100psi).

Fitted with 500mm rubber hose and single clip-on Model No. connector.

SEA SA399 • Inlet Size: 1/4"BSP.

Model No. SEA SA924

Digital Tyre Inflator with Clip-On Connector

Digital Tyre Inflator with 0.5m Hose & Push-On Connector

• Heavy-duty extruded aluminium body and zinc head.

• Linear pressure scale, read in psi and bar.

• 2.7m Hose for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres.

• Range: 0-9.6bar(0-140psi).

Model No.

SEA SA396

Compact Rechargeable Tyre Inflator & Powerbank with Work Light

Digital tyre inflator with output of 12L/min.

Maximum Pressure: 120psi.

Pressure gauge reads psi, kpa, kg/cm² and bar.

140mm Extension tube with Schrader connection.

Micro USB rechargeable (cable supplied).

USB output for charging mobile phone etc. (5V/2A).

Supplied with sports ball pin adaptor, balloon/ inflatables adaptor and also a Presta valve adaptor for road bicycle tyres.

• Built-in 1W SMD LED for ease of use at night.

• Preset the desired pressure, unit will stop automatically once pressure is reached.

• Auto cut-out if hose kinks, to avoid damage to pump.

• • • • • • •

• Die-cast body and digital type gauge with rubber protector.

• Displayed in psi, bar, kpa and kg/cm².

• Range: 0-17bar(0-250psi).

• Display Type: backlit LCD. • Fitted with 500mm rubber hose and single clip-on connector.

• Batteries: 2 x AAA (supplied).

Model No. • Inlet Size: 1/4"BSP.

• Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator.

• Auto power off after 8 seconds and auto power on once pressure is sensed, or air inflation starts.

• 0.5m Flexible hose fitted with 240mm push-on air connector.

Model No. SEA SA374

SEA SA400

Premier Anodised Tyre Inflator with Twin Push-On Connector

• Manufactured to comply with EN 12645.

• Aluminium body with rubber bumper.

• Linear pressure scale, dual calibrated in psi and bar, with parallax correction.

• 0.5m Flexible hose fitted with 240mm twin push-on air connector.

• Range: 0-9.6bar(0-140psi).

• Supplied with a serial numbered calibration certificate.

• Three year guarantee.

32 35535_Intercars Summer 2020 48pp (english).indd 32

Model No. SEA CTI120

Premier Anodised Digital Tyre Inflator with Twin Push-On Connector

Model No. SEA SA37/93B

• Anodised black aluminium body with impact absorbing rubber bumper.

• Auto power on/off backlit LCD digital display.

• Calibrated in psi, bar and kPa. • 0.5m Flexible hose fitted with 240mm twin push-on air connector.

• Range: 0.3-17.2bar(4-250psi).

• Supplied with a serial numbered calibration certificate.

• Features a battery level indictor.

• Powered by 2 x AAA batteries (supplied).

• 3 year guarantee.

Model No. SEA SA37/96B

*Please refer to www.sealey.co.uk/guarantee for more information on guarantees.

28/02/2020 13:34:43

Professional Air Qube Digital Tyre Inflator with OPS + Nitrogen Purge

Torque Limited Tyre Valve Tool

• Pocket size tool specifically designed to prevent over tightening of valve cores fitted to wheels/tyres with TPMS. • Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs.

Model No. • Preset Torque Value: 0.45Nm(4lb.in).

• Touch screen technology with human touch recognition software.

• Electronic pressure preset with additional four button memory function.

• Three modes - inflate, deflate and over pressure setting (OPS) - for automated bead seating.

• Nitrogen (N2) purge capability.

• Red flashing light, flashing screen and audio signal for end of cycle.

• Auto-start Inflation.

• Ceramic sensor gives guaranteed accuracy to ± 0.5% of full scale reading even with hose up to 50m in length.

• 21mm Backlit transflective LCD gives a clear easy-to-read display.

• Supplied with a wall bracket, 5m hose with new patented design PCL clip-on connector and 3-pin plug.

• 2 Year Guarantee.

SEA TST18

Digital Tyre Pressure & Tread Depth Gauge Model No. SEA SA390

127kg Wheel & Tyre Handling Dolly

• Tyre pressure gauge with integral tread depth gauge and work light.

• Push-button operation with backlit LED display for tyre pressure.

• Read-out available in bar, psi, kg/cm² or kPa. • Integral tread depth gauge reads up to 20mm.

• Auto power-off.

Model No. SEA TSTPG11

Digital Tyre Tread Depth Gauge

Model No. SEA TH002

• For commercial sized wheel and tyre removal/installation.

• Fork Centres: 535mm.

4-Way Wheel Brace

1/2"Sq Drive 4-Way Wheel Brace

• Forged construction with hot forged sockets and baked finish.

• Socket Sizes: 17, 19, 21, 22mm.

• Forged construction with polished mirror finish.

• Features three popular size wheel nut sockets and 1/2"Sq drive adaptor for standard sockets.

• Socket Sizes: 17, 19, 21mm.

Model No. SEA AK2090

Sump plug m17

Model No. SEA VS660.06

Model No. SEA AK2093

Sump plug m15

Model No. SEA VS660.07

• • • • •

Tough composite sliding gauge.

10mm High figures in LCD display.

Metric and Imperial calibration with conversion between the two.

Range: 0-25mm(0-1").

Model No. Zero setting control allows for comparative measurement.

SEA VS0564

1/2"Sq Drive Extra-Long 4-Way Wheel Brace

• Lever bar length: 506mm.

• Longer than most other wheel braces on the market, allowing extra force to be applied.

• Manufactured from carbon steel with chrome finish.

• Features three popular sizes of wheel nut sockets, and 1/2"Sq drive adaptor for standard sockets.

• Socket Sizes: 17, 19, 21mm.

Sump plug m20

Model No. SEA VS660.05

*Please refer to www.sealey.co.uk/guarantee for more information on guarantees.

35535_Intercars Summer 2020 48pp (english).indd 33

Model No. SEA AK2096

Tap m15

Model No. SEA VS660.03

33 28/02/2020 13:34:47

Magnetic Camber Castor & Kingpin Gauge

Steering Turntables - Pair

• Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber, castor angles and kingpin inclination.

• Two large adjuster knobs, one for conveniently zeroing bubble during angle measurement, and one for adjusting kingpin inclination.

• Camber gauge with fixed graduation from -5° to +5°.

• Adjustable castor gauge graduated from -3° to +11°.

• Kingpin gauge graduated from 0° to 14° left to right.

• Magnetic plate Ø: 85mm.

• Supplied in storage case.

• Use in conjunction with Model No. GA42 Gauge Set for accurate castor and kingpin alignment.

• Also measures steering angles.

• Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements.

• Measures up to 45º rotation in either direction.

• Maximum loading 1360kg per pair.

Steering Rack Knuckle Tool

• Suitable for the fast and easy removal of the steering knuckle.

• Fits racks with hex drive, two flats and round ends.

• Ideal for vehicles with limited access and avoids the need to remove the rack assembly.

• Suitable for steering rack Model No. knuckles with a diameter SEA VS4000 of Ø33 to 41mm.

Model No. SEA GA450

1/2"Sq Drive Mercedes Sprinter Rear Axle Hub Nut Spanner

• Mercedes Sprinter (W901-W905) rear axle hub nut spanner.

• Tightens the grooved lock nut when replacing wheel bearings.

• Fitted with a 1/2"Sq Drive if required.

Model No. SEA VS4990

Model No. SEA GA44

Steering Wheel Level

• Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment.

• Ideal for use with Four-Wheel Laser Aligners such as Model No. GA70.

• Self-retaining and centring using a spring loaded mechanism.

• Features a level bubble to show horizontal position.

• Suitable for steering wheels with an internal diameter of between 270mm and 340mm.

Model No. SEA GA460

Four-Wheel Laser Wheel Aligner

• Fast, simple and accurate alignment of both front and rear wheels.

• Optimises vehicle performance and set up after installation or modification of steering and suspension components.

• Simple and fast to use, it is ideal for the busy professional workshop and has a fast return on investment - potentially adding value to every steering or suspension job.

• This fully portable kit is also ideal for track-day set up for the enthusiast.

• Works on practically all cars and light commercials with rim diameters between 330mm(13") and 560mm(22").

• Supplied with steering wheel clamp, wheel turn plates and Model No. wheeled storage rack.

SEA GA70 • Supplied with comprehensive operating instructions.

34 35535_Intercars Summer 2020 48pp (english).indd 34

28/02/2020 13:34:50

2000kg Hydraulic Coil Spring Compressing Station with Gauge

1000kg Hydraulic Coil Spring Compressor

• Hydraulic hand pump unit powers 1tonne capacity ram and yoke assembly.

• Up to 50% quicker than using other ratchet driven spring compressors.

• Equipped with two pairs of spring yokes with plasticized covers to prevent slippage and damage to springs.

• Suitable for springs from 80mm ID to 165mm OD.

Model No. SEA VS7011

• Foot operated hydraulic unit, with gauge showing force applied to the spring under compression.

• Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications.

• Fitted with plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer’s guarantee.

• Suitable for springs from Model No. Ø87mm to Ø202mm.

1500kg Air/Hydraulic Coil Spring Compressing Station

1000kg Coil Spring Compressor Air Operated

• 1500kg Capacity air actuated hydraulic unit with alternative foot operation.

• Quicker and easier than using ratchet driven spring compressor.

• Plastic coated yokes reduce the risk of spring slippage/damage.

• Suitable for springs from Ø80mm to Ø175mm.

• Fast and safe compression of road springs.

• 1000kg Air operated unit with safety locking guard.

• Supplied with two interchangeable plastic coated lower yokes and a suspension strut clamp.

• Fits a wide range of spring configurations and diameters.

• Also features a strut locating platform for easy movement of the suspension strut to avoid unnecessary lifting.

Model No. SEA RE232

SEA RE2311

Model No. SEA RE300

2pc Long Reach Coil Spring Compressor

Hub Cleaner

2pc 1/2"Sq Drive Strut Leg Pry Socket Set

• Carbon steel, hardened lead screws and cast jaws.

• Wrap over coil jaws for extra safety.

• Long reach jaws are ideal for the longer type of coil spring found on modern vehicles.

• Maximum Capacity Per Pair: 1100kg.

Model No.

• Removes surface dirt and corrosion on hubs that use wheel bolts.

• Ideal for preparing wheels, hubs and brake discs or drums for re-assembly.

• Use with 1/2"Sq drive.

• Reduces risk of damage to hub casting.

• Includes two sizes of pry socket: 7 x 5mm and 8.2 x 5.5mm.

• Suitable for removal and installation of strut legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW.

Model No. SEA VS8001

SEA AK3846

14pc Stud Hub Cleaner

• • • • •

Model No. SEA SX034

CVJ Boot Tool - Air

Removes surface dirt and corrosion on hubs fitted with studs.

Ideal for preparing wheels, hubs and brake discs or drums for re-assembly.

Cleaning discs fit over wheel studs.

Use with power drill or air impact wrench.

Model No. Supplied with 1/2"Sq drive adaptor.

SEA VS8002

• Innovative tool saves time, money and frustration.

• Installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.

• No effort and no mess!

• Save on labour time by up to 70% and prevent damage to CV joint.

• Composite body with simple control valve, works from standard workshop air supply.

• While fitting boot the tool can be removed from the air line when pressurized (arms open) and will maintain pressure until Model No. the release button is pressed.

SEA BSL103 • Suitable for cars and light commercial vans.

35 35535_Intercars Summer 2020 48pp (english).indd 35

28/02/2020 13:34:52

1kV Electrician’s Safety Gloves Pair

• High voltage electrician’s gloves suitable for use on hybrid and electric vehicles.

• Grade 0 gloves suitable for working on systems up to 1kV AC in accordance with EN 60903.

Model No. SEA HVG1000VL

High Voltage Rescue Pole

• High voltage rescue pole suitable for use up to 45kV AC in dry conditions, in accordance with EN 50508.

• Supplied with wall mounting brackets and instructions for use.

• Suitable for hybrid and electric vehicle applications.

• Length: 1.79m.

Model No. SEA HRP45

25m Red/White Post & Chain Kit

Pneumatic Glove Tester

• Highly visible post and chain kit ideal for creating a temporary safety barrier when working on hybrid and electric vehicles.

• Consists of six red/white posts, six bases, 25m x 6mm red/white plastic chain and chain securing hooks.

• Post base can be filled with dry sand for extra stability.

• Pneumatic glove tester used to carry out a pressure test on electricians high voltage gloves.

• Suitable for use with Model No. HVG1000VL gloves.

Model No. SEA RWSBKIT

Electrician’s Insulating Rubber Safety Mat

• Class 2 High voltage insulating rubber floor mat.

• Essential item required to protect vehicle technicians from the risk of electric shock when working on electric or hybrid vehicles.

• Independently tested and certified as offering safe protection up to 17kV AC in accordance with BS EN 61111.

Model No. • Size: 1 x 1m.

SEA HVM17K02

200 x 300mm High Voltage Warning Sign

Model No. SEA GT117

90pc Electrician’s Tool Kit

6pc Electrical VDE Tool Set

BLE AVAILA E JUN

BLE AVAILA E JUN • Comprehensive range of frequently used hand tools.

• Manufactured from hardened and tempered Chrome Vanadium steel.

• Includes 1/4" and 1/2"Sq drive sockets, hex keys, spanners, VDE approved screwdrivers and Model No. mains tester, VDE approved pliers, tape measure, SEA S01217 ball pein hammer, scissors, bits and accessories.

8pc Screwdriver Set VDE Approved

• Chrome Vanadium shafts with magnetic and corrosion resistant tips.

• Fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1000V. • Contents: Slotted; 3.5 x 100, 4 x 100, 5.5 x 125mm, 6.5 x 150mm, Phillips; Model No. #1 x 80, #2 x 100, Pozi; #1 x 80mm, SEA AK6124 #2 x 100mm.

• Manufactured from hardened and tempered Chrome Vanadium steel.

• Each tool is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC. • Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).

• Contents: Screwdrivers: Slotted - 5.5 x 125mm, Phillips - #0 x 75mm, #2 x 100mm, 175mm Combination Pliers, Model No. 150mm Side Cutters, 200mm Long Nose Pliers.

SEA S01218

6pc Extra-Long Hex Key Set

• Manufactured from heat treated and hardened S2 steel with a chemically blackened finish for resistance to corrosion.

• Keys range in length from 135mm to 215mm and in size from 2.5mm to 8mm.

• Fitted with PP/TPR handles, fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC. • Contents: 2.5, 3, 4, 5, 6, 8mm.

• Ideal for technicians working on Model No. modern hybrid and electrical vehicles SEA AK7177 (1500V DC safe live working).

• Electrical hazard warning sign, suitable for use on an exclusion zone around a hybrid or electric vehicle during repair or service operations.

• Rigid 3mm thick Model No. plastic warning SEA HVSA4 sign.

11pc Electrical VDE Tool Set

BLE AVAILA E JUN • Manufactured from hardened and tempered Chrome Vanadium steel.

• Each tool is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC. • Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).

• Contents: Screwdrivers: Slotted - 3 x 75mm, 4 x 100mm, 5.5 x 125mm, 6.5 x 150mm, Phillips - #0 x 75mm, #1 x 80mm, #2 x 100mm, 175mm Combination Pliers, 150mm Side Cutters, Model No. 200mm Long Nose Pliers, SEA S01219 Voltage Tester.

3/8"Sq Drive Calibrated VDE Torque Wrench 20-100Nm

• Chrome Vanadium steel ratchet head with smooth action mechanism.

• Calibration tolerance in accordance with BS EN ISO 6789:2003.

• Accuracy of ±4% and issued with an individually numbered test certificate.

• Fully insulated to VDE and EN 60900 to protect from electric shocks up to 1500V DC and 1000V AC. • Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).

• Length: 450mm.

Model No. • Supplied in storage case.

SEA STW802

36 35535_Intercars Summer 2020 48pp (english).indd 36

28/02/2020 13:34:59

6pc Motorcycle Swingarm Lock Nut Set

• Four tooth sockets, specially designed to remove castellated lock nuts found on motorcycle swingarms.

• Also suitable for some engine mounting nuts.

Motorcycle Chain Breaker & Riveter

Model No. SEA SMC1

10pc Bridge Bearing Puller Set

• Size: 1/2"Sq Drive H24.

• Length 53mm.

• Can be used for removing the front and rear wheels on modern motorbikes with internal hex axle, suitable for maximum loads.

• Suitable for BMW, Honda, Suzuki, Model No. Yamaha, Ducati, Kawasaki and many other makes.

SEA SMC37

Model No. SEA VS779

Heavy-Duty Motorcycle Chain Splitter & Riveting Tool Set

• 10pc Screw type bridge extractor set.

• The thin tapered lips on the collets secure a positive grip on the curved surface of the internal bearing bore.

• Gently removes blind bearings where the use of a slide hammer Model No. may damage the surrounding material.

SEA AK7160 • Bearing extractor collets with internal capacity from 8 to 27mm.

H24 1/2"Sq Drive Motorcycle Wheel Nut Socket

• Breaks and rejoins most types of chain quickly and easily.

• Suitable for most sizes of drive or cam chain from #35 to #630.

• Supplied with a range of pins, dies and detailed instructions.

• Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links.

• Set is also ideal for use on horticultural and agricultural machinery.

• Includes tools designed for riveting and plate holder for connecting links accurately.

Model No. SEA SMC4

2.5L Motorcycle Oil Drain Pan

• Heavy-duty polypropylene construction, ideal for draining oils and antifreeze.

• Sloped design to easily tip contents out of pan.

• Thin contoured design to prevent accidental movement while in use.

Model No. SEA MDRP01

24 Bin & Panel Combination

24 Bin & Panel Combination

Key Cabinet with 45 Key Tags

• Bins manufactured from shockproof polymer which is resistant to mild acids, solvents and oils.

• Bins have a high thermal stability and resist damage from extremes of temperature.

• Bin Dimensions (W x D x H): 100 x 110 x 75mm.

• Steel Panel Dimensions (W x D x H): 630 x 10 x 380mm.

• Supplied with heavy-duty steel back panel.

• Bins manufactured from shockproof polymer which is resistant to mild acids, solvents and oils.

• Bins have a high thermal stability and resist damage from extremes of temperature.

• Bin Dimensions (W x D x H): Medium; 100 x 160 x 75mm, Large; 100 x 210 x 75mm.

• Steel Panel Dimensions (W x D x H): 630 x 10 x 380mm.

• Supplied with heavy-duty steel back panel.

• Seamless steel construction with durable coating for corrosion resistance.

• Fitted with high quality cam type lock and supplied with two keys.

• Piano hinged door with catch plate gives added security.

• Supplied with a pack of colour-coded key tags.

• Includes mounting screws and wall plugs.

• Size (W x D x H): 240 x 80 x 300mm.

Model No. SEA TPS130

Model No. SEA TPS131

Model No. SEA SKC45

37 35535_Intercars Summer 2020 48pp (english).indd 37

28/02/2020 13:35:02

56pc Security TRX-Star**/Hex/ Ribe/Spline Bit Set 3/8" & 1/2"Sq Drive

42pc 3/8" & 1/2"Sq Drive TRX-Star**/ Hex/Spline Bit Set

• Manufactured from Chrome Vanadium 6150 steel.

• Convenient high-impact carry-case presents bits at an angle for easy selection.

• Contents: Security TRX-Star** Bits; T20H, T25H, T30H, T40H, T45H, T50H, T55H, T60H (1 each 30 & 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 & 75mm), Ribe Bits; M5, M6, M7, M8, M10, M12, M14 (1 each 30 & 75mm), Model No. Spline Bits; M5, M6, M8, M10, M12 (1 each 30 & 75mm), SEA AK21956 Drive Adaptors; 3/8"Sq x 10mm Hex, 1/2"Sq x 10mm Hex.

• Manufactured from Chrome Vanadium steel.

• • Contents: TRX-Star** Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 & 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 & 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 & 75mm), Drive Adaptors; 3/8"Sq x 10mm Hex, Model No. 1/2"Sq x 10mm Hex.

42pc 3/8" & 1/2"Sq Drive TRX-Star**/Hex/Spline Bit Set

SEA AK219

• High quality S2 steel bits with a zinc phosphate finish, each size in 30 and 75mm lengths.

• Hardened (58-62 HRC) and tempered for added strength.

• Includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.

• Contents: TRX-Star** Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 & 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 & 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 & 75mm), Model No. Drive Adaptors; 3/8"Sq x 10mm Hex, SEA AK21942P 1/2"Sq x 10mm Hex.

• High quality S2 steel bits with a zinc phosphate finish, each size in 30 and 75mm lengths.

• Hardened (58-62 HRC) and tempered for added strength.

• Includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.

• Contents: TRX-Star** Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 & 75mm), Security TRX-Star** Bits; T20H, T25H, T30H, T40H, T45H, T50H, T55H, T60H (1 each 30 & 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 & 75mm), Ribe Bits; M5, M6, M7, M8, M9, M10, M12, M14 (1 each 30 & 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 & 75mm), Drive Adaptors; 3/8"Sq x 10mm Hex, 1/2"Sq x 10mm Hex.

44pc Hammer-Thru Screwdriver, Hex Key & Bit Set

44pc Screwdriver, Hex Key & Bit Set • Chrome Vanadium satin finish shafts with shot blasted and magnetized tips.

• Contents: Screwdrivers; Slotted - 3 x 75, 4 x 100, 5 x 100, 6 x 125, 8 x 150mm, Phillips - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, Pozi #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, TRX-Star** T25 x 100, T27 x 100, T30 x 125, T40 x 125mm, Bit Driver, 1/4" Hex Bits; TRX-Star** - T7, T8, T9, T10, T15, T20, Hex - 3, 4, 5, 6mm, Hex Keys; Metric - 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm, Imperial - 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4".

Model No. SEA AK21974P

Model No. Model No. S01090

Model No. S01106

SEA S01090 SEA S01106

11pc Hammer-Thru Screwdriver Set

• Hardened and tempered Chrome Vanadium steel shafts with a satin polished finish.

• Features hexagonal bolsters for use with a wrench.

• Contoured, textured handles with hammer caps.

• Shot blasted and blackened tips.

• Contents: Slotted; 6 x 38, 5 x 100, 6 x 125, 8 x 150, 8 x 200, 10 x 200mm, Phillips; #2 x 38, #1 x 75, #2 x 100, #2 x 150, #3 x 150mm.

Hammer-Thru ✘ ✔

4pc Heavy-Duty Prybar Set

Model No. SEA AK4933

• Heavy-duty, angled shafts.

• Chrome Molybdenum steel with blackened finish.

• Textured comfort grip handles with hammer cap.

• Contents: 200, 300, 460, 610mm.

Model No. SEA AK9105

**TRX-STAR, TRX-TS and TRX-P tools are suitable for driving TORX® and TORX PLUS® fasteners respectively. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.

74pc 3/8" & 1/2"Sq Drive TRX-Star**/Security TRX-Star**/ Hex/Ribe/Spline Bit Set

38 35535_Intercars Summer 2020 48pp (english).indd 38

28/02/2020 13:35:07

16pc 1/2"Sq Drive Deep Impact Socket Set - Metric

Refractometer Antifreeze/Battery Fluid/Screenwash/AdBlue®

70mm 1"Sq Drive Impact Socket

• Accurately measures the strength of battery fluid, screenwash, antifreeze and AdBlue® by measuring the refractive index of light passing through the mixture.

• Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology), G13 and aqueous/urea content of AdBlue®.

• Temperature corrected prism ensures accuracy.

• Eyepiece with adjustable focus.

• Simple calibration check using distilled water.

• Supplied with pipette and storage case.

Model No. SEA VS0052

Brake Pad Thickness Gauge

• Manufactured from Chrome Vanadium steel, hardened, tempered and with a phosphate finish for added corrosion resistance.

• Deep WallDrive® sockets allow a transfer of up to 30% more torque to the fixing.

• Sizes: 10-32mm.

• Chrome Molybdenum, drop-forged, WallDrive® impact socket.

• Phosphate finish for greater corrosion resistance.

• Ideal for use with air impact wrenches.

Model No. SEA AK5816M

Model No. SEA IS170

12V 1100A ElectroStart® Batteryless Jump Starter

• Measures the brake pad lining on the vehicle without removing the road wheel.

• Slim design enables the tool to locate the rear of the pad backing plate, allowing the probe to measure the distance between the underside of the backing plate and brake disc.

• Suitable for both internal and external brake pads.

• Features calibration line, plus minimum 1.5mm pre-MOT check mark.

• Range: 1.5-13mm.

• Designed for brake pads that have a normal 6mm thick backing plate (Class IV, V).

Model No. SEA VS058

100pc Mechanic’s Tool Kit

• Output: 1100A (Peak), 550A (EN).

• Innovative technology with no internal battery so no need to wait hours for the unit to charge before use.

• Simple and safe to use with no long term battery storage issues.

• Can be fully energised in approximately three minutes.

• Compact and lightweight for easy handling and storage, yet still delivers the same result as heavy, bulky, lead acid battery equivalents.

Model No.

• Comprehensive range of frequently used hand tools for professional mechanics and serious DIY experts.

• 1/4" & 1/2"Sq drive 90-tooth offset comfort grip ratchet wrenches.

• Includes 1/4" and 1/2"Sq drive sockets, spark plug sockets, extension bars, spanners, screwdrivers, ball pein hammer, pliers, bits and accessories.

• Contents: 1/4"Sq Drive Standard Sockets; 4-13mm, 1/4"Sq Drive Deep Sockets; 9-13mm, 1/4"Sq Drive Tools; Offset Ratchet Wrench, Universal Joint, 75mm Extension Bar, Bit Holder, Spinner Handle, 1/2"Sq Drive Standard Sockets; 10-32mm, 1/2"Sq Drive Spark Plug Sockets; 16 & 21mm, 1/2"Sq Drive Tools; Offset Ratchet Wrench, Universal Joint, 125mm Extension Bar, Combination Spanners; 8-19mm, 25mm Adaptor, 1/4"Hex Bits; Slotted - 4, 5.5, 7mm, Phillips - #1, #2, #3, Hex - 3 ,4, 5, 6mm, TRX Star** - T15, T20, T30, Hex Keys; 1.5, 2, 2.5mm, Screwdrivers; Slotted - 5 x 38mm, 6 x 100mm, Phillips - #1 x 38mm, #2 x 100mm, Pozi - #2 x 150mm, Pliers; Water Pump, Combination, Side Cutters, 12oz Ball Pein Hammer, Wire Stripper/Crimper, Terminals (x26).

• Case Size (W x D x H): 465 x 375 x 90mm.

SEA E/START1100

360° 3W COB + 1W LED Rechargeable Lithium-Polymer Inspection Lamp

• Mini, lightweight lamp with unique and innovative 360° swivel and tilt function.

• 3W COB LED produces up to 300 lumens with a CRI-80 rating.

• Even and constant spread of light.

• 1W High power LED directional torch.

• Base magnet and swivel hook for hands-free operation.

• Rechargeable 3.7V 1.5Ah Li-Polymer battery.

• Operating Time (Side/Top): 2/6hr.

Model No. • Micro USB charging port.

SEA LED3601 • Supplied with USB cable.

Model No. SEA AK7400

Brake Fluid Tester - Boil Test

• The approved method of testing the water content of brake fluid.

• Just 3% of moisture can lower the brake fluid boiling point by over 100°C. • The best way to detect this small water content is to measure the boiling point of the fluid.

• The unit incorporates a heater element, LCD display and a power lead for use on 12V DC power supplies.

• Works on DOT 3, 4, 5 and 5.1 specification fluids.

Model No. SEA VS0275

Diesel Fuel Priming Set

• A comprehensive fuel priming set fitted with the latest male and female quick connectors found on Fiat, Ford, Land Rover, Mercedes, PSA, Renault, Rover and Vauxhall/Opel vehicles.

• Designed to work in conjunction with the low pressure fuel circuit, to reintroduce fuel back up to the fuel line after maintenance.

• Clear pipes allow visual detection of any air within the fuel system or being inadvertently drawn into the fuel line.

• Two universal connectors and one clear pipe allow connection Model No. to older vehicles not fitted with SEA VS555 quick release connectors.

39 35535_Intercars Summer 2020 48pp (english).indd 39

28/02/2020 13:35:12

Locking Pocket Knife

• Supplied with a high quality stainless steel blade.

• Fitted with lightweight aluminium handle inlaid with rubber grip for added comfort and control.

Model No. • Blade locks open for safe use.

SEA PK1 • Supplied with belt clip.

15 Function Multi-Tool

• • • •

15 Function Multi-Tool

Manufactured from high quality stainless steel.

Fully hardened and tempered for long life.

Lightweight aluminium/composite handle construction.

Multi-tool functions include combination pliers, long nose pliers, wire cutter, fine edge blade, bottle opener, can opener, slotted screwdrivers, Phillips screwdriver, fish scaler, file, Model No. hook remover, ruler, wood SEA PK28 saw and single/double file.

2pc 15 Function Multi-Tool & Twin Blade Knife Set

• • • •

Manufactured from high quality stainless steel.

Fully hardened and tempered for long life.

Fine blanking construction for superior performance.

Multi-tool functions include pliers, wire cutters, scissors, wood saw, leather punch, bottle opener, file with hook remover, can opener, Model No. fine edge blade, slotted and SEA PK36 Phillips screwdrivers.

500mm Magnetic Tool Holder

• Manufactured from high quality stainless steel.

• Fully hardened and tempered for long life.

• Lightweight aluminium/composite handle construction.

• Multi-tool functions include combination pliers, long nose pliers, wire cutter, fine edge blade, bottle opener, can opener, slotted screwdrivers, Phillips screwdriver, fish scaler, file, hook remover, ruler, Model No. wood saw and single/double file.

SEA PK27

10pc Pipe Flaring & Cutting Kit

• Wall or toolbox mounting magnetic rack.

• Size: 500 x 40mm.

• Suitable for retaining frequently used steel tools such as screwdrivers, spanners and pliers.

• Supplied with fixing screws.

GripMAX® Sealey Bottle Openers

• Tubing kit suitable for cutting and flaring copper, brass or thin walled aluminium pipe.

• Includes screw-type tube cutter with die-cast frame and integral de-burring tool.

• Dies: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8".

• Ergonomic polypropylene and TPV rubber soft grip handle.

• Includes hanging hole for alternative storage.

Model No.

Model No. SEA AK506

SEA AK4368 SEA AK4368HV

Telescopic Magnetic Pick-Up Tool 1kg Capacity

• Chromed metal body with pocket clip for safe storage.

• 1kg Pick-up capacity from Ø10mm magnet.

• Minimum/Maximum Length: 130/650mm.

Model No. SEA AK211

Colour Red Hi-Vis Green

Ø40mm Telescopic Articulated Inspection Mirror

Model No. SEA AK651

• Chromed metal body with pocket-clip for safe storage.

• Ø40mm inspection mirror mounted on ball joint permitting full 360° rotation.

• Minimum/Maximum Length: 125/690mm.

Model No. SEA AK652

40 35535_Intercars Summer 2020 48pp (english).indd 40

28/02/2020 13:35:15

3pc Miniature Brush Set

3pc Auto Engineer’s Wire Brush Set

3pc Miniature Wire Brush Set

• Composite stocked brush set with hanging holes.

• Steel, nylon and brass filled heads.

• Suitable for cleaning spark plugs and smaller engineering components.

• Composite handles with hanging holes.

• Small and medium (35 and 90mm headed) brass filled brushes for components such as glow/spark plugs and contacts and a large steel filled brush (90mm head) for removal of rust and welding slag.

• Composite stocked brush set with contoured soft grip handles.

• Stainless steel, nylon and brass filled heads suitable for cleaning spark plugs and smaller engineering components.

• Includes hanging hole.

Model No. SEA AK9801

Model No. SEA AK9791

Ø65mm Twist Knot Wire Cup Brush M14 x 2mm

Model No. SEA WB100

Brassed Steel Wire Brush

12"(300mm) Broom Soft Bristle

• Brassed steel filaments.

• Curved, folded, alloy stock with composite handle.

• Soft bristle broom.

• Fitted with handle support bracket.

• Ideal for indoor or outdoor use.

Model No. SEA WB05/R

Ø75mm Magnifying Glass • Suitable for use with power tools up to the maximum rated rpm.

• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.

Model No. SEA TKCB651

• Lightweight composite handle housing a glass lens with x5 magnification.

• Ideal for enlarging small work areas for detailed inspection.

• Includes hanging hole for storage.

20pc Screw Pitch Gauge Set

• Folding 20 blade set, individually stamped with accurate thread profiles.

• Range: 0.4-6mm.

Model No. SEA AK71SPG

Model No. SEA AK9647

Tow Pole with Shock Spring 2000kg Rolling Load Capacity

• 2000Kg rolling capacity tow bar ideal for the safe secure towing of motor vehicles.

• Connects to car towing eyes with secure attachment hooks.

• Tow pole has a damping spring to mitigate shock from acceleration or braking.

• Pole easily adjusted to match the towing eye orientation of both towed and towing vehicle.

• Breaks down for easy storage and is supplied with storage bag.

Model No. SEA TPK2522

Model No. SEA BM12S

50mm x 3m Steel Wheel Car Transporter Ratchet Tie Down 4500kg Load Test

• Manufactured from polyester webbing with stitched reinforcement around hooks.

• Suitable for securing cars on transporters using wheel strap, which slides on to the main tie down.

• Features wheel chocker with ‘O’ ring for use with steel wheels.

• A double-locking, short narrow handle ratchet ensures there is no risk of disengagement or tension loss until the handle is released.

• Load Test: 4500kg.

Model No. • Webbing Length: 3m.

• Cross Strap Length: 320mm.

SEA TDRWS

41 35535_Intercars Summer 2020 48pp (english).indd 41

28/02/2020 13:35:17

150mm(6") Vernier Caliper

200mm(8") (0.02mm-1/1000"Acc) Vernier Caliper

• Traditional pattern stainless steel vernier with exterior/interior measurement and depth gauge.

• Dual locking carriage with micro-thumb adjustment.

• Accurate to 0.02mm or 1/1000".

• Supplied in storage case.

• • • •

High quality, hardened and tempered stainless steel caliper.

Dual locking carriage with micro-thumb adjustment.

Accurate to 0.02mm or 1/1000".

Supplied in storage case.

300mm(12") (0.02mm-1/1000"Acc) Vernier Caliper

• • • •

High quality, hardened and tempered stainless steel caliper.

Dual locking carriage with micro-thumb adjustment.

Accurate to 0.02mm or 1/1000".

Supplied in storage case.

Model No. SEA AK9622

Model No. SEA AK962

Model No. SEA AK9623

200mm Double End Engineer’s Scriber

150mm Carbide Tipped Scriber

Heavy-Duty Magnetic Stand without Indicator

• Precision manufactured tool with hardened steel tips.

• Features straight and 90° tips with knurled body.

• Fitted with pocket clip.

• Suitable for use on glass, metals and ceramics.

• Ideal for machinists, welders, tinsmiths and hobbyists.

• Precision ground base with rotary magnetic control.

• Articulated arm with rotary lock.

• Combination dial and scribing clamp with fine adjustment control.

Model No. SEA AK9752

Model No. SEA AK9751

Model No. SEA AK960

3pc Micrometer Set

4pc Measuring Tool Set

200mm Tap Wrench

• Set includes three external micrometers ranging from 0-75mm.

• Supplied with extension sets and adjusting wrench.

• Four of the most commonly used precision engineering measuring/checking devices.

• Contents: 200mm Vernier Caliper, 0-25mm Micrometer, 100 x 70mm Bevelled Edge Square, 150mm(6") Stainless Steel Rule.

• Professional style steel tap wrench with sliding jaws.

• Suitable for tap sizes between M3 and M12.

Model No. SEA AK9651M

Model No. SEA AK91SET

Model No. SEA AK727

42 35535_Intercars Summer 2020 48pp (english).indd 42

28/02/2020 13:35:19

3pc T-Handle Tap Wrench Set

45pc Tap & Die Set - Split Dies

• General purpose tap wrenches for tapping and reaming.

• Solid jaw design and heavy knurled cap.

• Maximum Square Size; Small Wrench – 3.9mm, Medium Wrench – 5mm, Large Wrench – 7mm.

• Supplied in pouch.

• Ideal for the engineer and farmer.

• Complete range of metric Tungsten taps and dies, 6mm up to 24mm.

• Includes Tap Wrench, T-Bar Tap Wrench and Steel Die Wrench.

Model No. SEA AK9799

Model No. SEA AK303

40pc Tap & Die Set - Split Dies

• • • • •

76pc Tap & Die Set - Split Dies

High carbon steel taps and dies.

Dies with machined lead-ins for ease of use.

Set includes one long handled adjustable tap wrench with professional type sliding jaw.

Steel die-holder with retention screw, suitable for dies from M3 up to M12.

Also includes T-Bar type tap wrench, screwdriver and thread gauge.

Model No.

SEA AK301

• Split dies with machined lead-ins for ease of use.

• Die holder features self-centring mechanism for straight and accurate thread cutting.

• Contents: Taps & Dies; Coarse - 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1, 8 x 1.25, 10 x 1.5, 12 x 1.75mm, Fine - 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1, 10 x 1.25, 12 x 1.25mm, Taper & Plug Tap & Die; 1/8"BSP, HSS Drill Bits; 1.7, 2.5, 2.6, 2.9, 3.3, 3.5, 3.8, 4.2, 4.5, 5, 5.3, 6.8, 7, 8.5, 8.8, Model No. 10.3, 10.7mm, Tap Wrench, T-Bar Tap Wrench, Die Holder, SEA AK3076 Thread Gauge, Screwdriver.

10pc Step Drill Screw/Bolt Extractor Set

10pc Diamond Needle File Set

250mm Wide Opening Locking Pliers

• Heat treated Chrome Molybdenum steel screw extractors and fully ground step drill bits.

• Ideal for removing right-hand thread broken/seized screws and bolts.

• Step drills produce a conical hole which when used with the corresponding extractor provide increased grip to easily remove damaged fitting.

• Special design of the extractors cut into the side of the hole allowing increased force and make removing heavily seized Model No. fittings easier.

• Popular sized diamond needle files.

• Vinyl dipped handle shafts for extra comfort.

• Contents: Flat Parallel, Flat Taper, Half-Round, Three-Square, Square Form, Round Form, Oval Form, Knife Form, Crossing File, Barrette File.

• Average Overall Length: 140mm.

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.

• Heat treated Chrome Molybdenum jaws and handle.

• Deeply serrated and hardened teeth on a contoured jaw offers secure grip on both flat and round material.

• Features a four-position slide and lock joint allowing for an extra wide opening of the jaws.

• Jaw Capacity: 80mm.

SEA AK8187

Model No. SEA AK577

Model No. SEA AK6870

43 35535_Intercars Summer 2020 48pp (english).indd 43

28/02/2020 13:35:22

10mm Cylindrical Front End Cut Tungsten Carbide Rotary Burr

10mm Cylindrical Ball Nose Tungsten Carbide Rotary Burr

10mm Arc Pointed Nose Tungsten Carbide Rotary Burr

10mm Conical Ball Nose Tungsten Carbide Rotary Burr

• 10mm Burr made from Tungsten Carbide.

• Cylindrical front end No. 6 cut (universal).

• For use on soft and hard metals, including welded seams.

• Supplied in a plastic storage box.

• 10mm Burr made from Tungsten Carbide.

• Ball nose No. 6 cut (universal).

• For use on soft and hard metals, including welded seams.

• Supplied in a plastic storage box.

• 10mm Burr made from Tungsten Carbide.

• Arc Pointed Nose No. 6 cut (universal).

• For use on soft and hard metals, including welded seams.

• Supplied in a plastic storage box.

• 10mm Burr made from Tungsten Carbide.

• Conical ball nose No. 6 cut (universal).

• For use on soft and hard metals, including welded seams.

• Supplied in a plastic storage box.

Model No. SEA SDB01

4-30mm Double Flute HSS M2 Step Drill Bit

• • • • •

High-speed HSS M2 double flute step drill.

Double straight flutes for efficient swarf clearance.

Allows clog-free precision drilling.

Hole Sizes: 4-30mm in 2mm increments.

Supplied in plastic storage case.

Model No. SEA AK4732

Model No. SEA SDB02

Model No. SEA SDB03

9pc Ø10mm Spot Weld Cutter & Drill Bit Set

• Spot weld cutter features spring loaded centre point to guide cutting crown onto weld.

• 8mm HSS drill with 5% Cobalt for longer life, suitable for more specialist materials including galvanized, boron and high stress steels.

• Solid cobalt stock allows re-sharpening.

• Set includes replacement centre points and cutter crowns.

Model No. SEA AK4730

19pc HSS Cobalt Split Point Fully Ground Drill Bit Set

• Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials.

• 135° Split point tip enables bits to bite workpiece quickly, reducing the need for centre mark.

• Drills can be re-sharpened without affecting their performance.

• Sizes: 1-10mm in 0.5mm increments.

Model No. SEA AK4701

350pc Superseal Male & Female Connector Assortment

5kg Tub Shot Blasting Beads - Glass

• • • • • • Beads suitable for use in shot blasting cabinets.

• Size: 180-300microns.

Model No. SEA SDB06

Model No. SEA B5KG

Designed for applications when a waterproof joint is required.

Suitable for cable sizes from 0.5mm² to 1.5mm².

Kit contains male and female housing, terminals and seals.

Waterproof to IP65.

Contents: 1-Way Female Connector (x6), 1-Way Male Connector (x6), 2-Way Female Connector (x6), 2-Way Male Connector (x6), 3-Way Female Connector (x4), 3-Way Male Connector (x4), 4-Way Female Connector (x4), 4-Way Male Connector (x4), 5-Way Female Connector (x3), 5-Way Male Connector (x3), 6-Way Female Connector (x2), 6-Way Male Connector (x2), Model No. Rubber Seal (x100), Female Pin (x100), Male Pin (x100).

SEA SSCSET1

44 35535_Intercars Summer 2020 48pp (english).indd 44

28/02/2020 13:35:24

Ø75 x 2mm Cutting Disc 10mm Bore Pack of 5

23L Backpack with Reflective Strips

• Manufactured from durable polyester.

• Functional design with padded internal laptop pocket, to suit most 15" laptops.

• Reflective strip for clear front back and side visibility.

• Two outward facing zip pockets, one main and two elasticated side pockets.

• Carry handle.

• Adjustable padded straps.

• General purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.

• Supplied in a cost saving pack of five.

Model No. SEA PTC/3C5

Model No. SEA RSBP1

8pc Soldering Gun/Iron Kit

Professional Soldering Kit

• Comprehensive kit comprising 100W soldering gun, 30W soldering iron, iron holder, excess solder extractor, scraper, spare tips, solder wire and universal workpiece clamps.

• Fitted with 3-pin plugs.

Model No. SEA SD300K

100W Soldering Iron

• • • •

30/100W Dual powered pistol type soldering gun.

Boost trigger function to increase temperature.

Fitted with 1.5m cable and 3-pin plug.

Includes soldering wire, solder sucker, workpiece stand and metal soldering iron stand.

Mini Robot Soldering Stand with Magnifier

• Class 1 electrically insulated soldering iron with cool grip handle which stays comfortable during prolonged use.

• Fitted with replaceable soldering tip.

• Includes 1.5m cable with 3-pin plug.

• Complies with Low Voltage Directive and Electromagnetic Compatibility Directives.

Model No. SEA SD100

• Ideal for awkward jobs where a third hand is needed.

• Cast steel base for extra stability.

• Fitted with two fully articulated crocodile clamps and Ø60mm magnifying glass.

Model No. SEA SD250K

36pc Letter & Number Punch Sets

• High carbon steel punches.

• Hardened, tempered and chemically blackened.

• Full set of alpha-numeric characters including the ampersand symbol (number 6 doubles as number 9).

• Supplied in composite case.

Model No. SEA SD150

Model No.

Length

SEA AK8297

66mm

Character Height 8mm

SEA AK8298

73mm

10mm

45 35535_Intercars Summer 2020 48pp (english).indd 45

28/02/2020 13:35:29

60A Splash Proof Maxi Blade Fuse Holder - Pack of 2

Splashproof Standard Blade Fuse Holders - Packs of 10

Model No. FHSP30 Model No. FHSP20

• Splashproof fuse holder.

• Suitable for maxi blade fuses up to 60A.

Model No.

Model No. SEA FHMAXSP60

• Splashproof fuse holders.

• Packs of 10.

Quick Release Positive-Negative Battery Clamps - Pair

Rating

SEA FHSP20

20A

SEA FHSP30

30A

100pc Automotive MINI Blade Fuse Assortment

Copper-zinc plated steel & brass.

RoHS Compliant.

Cable Size: 25mm².

Post Size (Positive/Negative): Ø19mm/Ø17.5mm.

• Blue & red.

• Enables quick release.

• • • •

• Contents (Approximate Quantity): 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A (10 of each).

Model No. SEA BTQK12

Model No. SEA BCF100

180pc 50 & 100mm Heat Shrink Tubing Assortment - Mixed Colours

Thin wall heat shrink tubes.

RoHS compliant.

Shrink Ratio: 2:1.

Mixed Colours: Black, Blue, Red, White, Yellow.

Lengths: 50, 100mm.

Size (Approximate Quantity) - 50mm: Ø3.2 (x60), Ø4.8 (x40), Ø6.4mm (x20).

• Size (Approximate Quantity) 100mm: Ø3.2 (x30), Model No. Ø4.8 (x20), Ø6.4mm (x10).

SEA HST501MC • Supplied in partitioned box.

• • • • • •

225pc Rubber O-Ring Assortment

• Contents (Approximate Quantity): Ø3.5 x 1.7 (x20), 4.5 x 1.7 (x20), 5 x 1.7 (x20), 6 x 1.7 (x20), 7.5 x 1.7 (x20), 9 x 1.5 (x15), 9.5 x 2.5 (x15), 10.5 x 2.5 (x15), 12.5 x 2.5 (x10), 14 x 2.5 (x10), 15.5 x 2 (x10), 15.5 x 2.5 (x10), 17 x 2.5 (x10), 18.5 x 3.5 (x10), 19 x 2.5 (x10), 21 x 3.5mm (x10).

• Supplied in partitioned box.

Model No. SEA AB004OR

100pc 200mm Heat Shrink Tubing

Thin wall heat shrink tubes.

RoHS compliant.

Shrink Ratio: 2:1.

Colour: Black.

Length: 200mm.

Size (Approximate Quantity): Ø3.2 (x30), Ø4.8 (x30), Ø6.4 (x20), Ø9.5 (x10), Ø12.7mm (x10).

• Supplied in a pack.

• • • • • •

Model No. SEA HST200B

88pc Bonded Seals Assortment

• Bonded seals (Dowty Seals) assortment.

• Contents (Approximate Quantity): M18 (x8), M20 (x5), M22 (x5), M24 (x5), M10 (x20), M12 (x15), M14 (x15), M16 (x15).

• Supplied in partitioned box.

Model No. SEA AB010DS

225pc Air Conditioning Rubber O-Ring Assortment

419pc Rubber O-Ring Assortment

• Made from HNBR. • Designed for use with Freon R134a making them suitable for automotive air conditioning units and many other applications.

• Manufactured from Buna-N. • Suitable for personal and professional workshops, garages and plumbing.

• Supplied in partitioned interspaced box.

Model No. SEA ACOR225

Model No. SEA BOR419

46 35535_Intercars Summer 2020 48pp (english).indd 46

28/02/2020 13:35:32

120pc Automotive Standard Blade Fuse Assortment

Universal CVJ Boot Clamp Kit • Fast and simple to use.

• Kit includes 56m of high quality stainless steel banding with a tensile strength of 420N/mm².

• Dispenser case also houses 150* clamp sets and unique pliers with integrated cutters and band tensioner.

• Never be caught without the right sized boot clamp again. * Approximate quantities

Automotive Fuse Checker & Puller

Model No. SEA BSL102

Model No. SEA BCF120

• Contents (Approximate Quantity): 3A, 5A, 7.5A, 15A, 20A, 30A (15 of each), 10A (x30).

Parts Cleaning Brush with Hose

Ø56-116mm Universal Stretch CVJ Boot EU • Universal CVJ boot made from high quality neoprene material suitable for use with air operated boot installation tools.

• Supplied with fitting kit including clips and cutting guide.

• Suitable for most car and car derived van applications.

• Checks continuity of blade-type automotive fuses, in or out of fuse holder.

• Green LED indicates fuse is OK. • Also simplifies the removal of faulty fuses.

Model No. SEA CFT1

555pc Imperial & Metric Split Pin Assortment - Small Sizes

Model No. SEA CV96EU

Ø50-110mm CVJ Boot Ear Clamp Pack of 25

• Fits onto the flexible spout of Sealey parts cleaning tanks (except SM21) and allows a stream of fluid to pass through the bristles for extra cleaning power.

• Supplied with hose, adaptor nipple Model No. and two hose clips.

SEA SM201

5m Clear Silicone Repair Tape

• Stainless steel, single ear, low profile CVJ boot clamps.

• Size: Ø50-110mm.

Model No. • Manufactured to DIN 1.4301.

SEA CVC02 • Contents (Approx. Quantity): 1/16" x 1" (1.6 x 25.4mm) (x150), 3/32" x 1" (2.4 x 25.4mm) (x150), 3/32" x 1-1/2" (2.4 x 38mm) (x100), 1/8" x 1-1/4" (3.2 x 32mm) (x75), 1/8" x 2" (3.2 x 51mm) (x50), 5/32" x 2-1/2" (4 x 63mm) (x30).

Model No. SEA AB001SP

• • • • • • • • •

Self-fusing silicone.

Non-adhesive.

Flexible between -50°C to +260°C. Neaten up lines and extension cords in stowage.

Wrap hydraulic fittings and other exposed metal connections to help prevent corrosion.

Works even over wet, dirty, or oily surfaces.

Wrap it around anything that you want to secure, and it will never leave any sticky residue.

RoHS Compliant.

Not to be used with Petrol, Diesel or Brake Fluid.

Headlight Restoration Kit

30" Oscillating Tower Fan 3-Speed Model No. SEA ST5C

150mm Heavy-Duty Professional Cast Iron Fixed Base Vice

• Three-stage headlight restoration kit designed to eliminate the worst cases of headlight degradation, yellowing, oxidation and scratches.

• Includes everything needed to restore the cloudiest lenses.

• One kit is intended to restore two headlight lenses.

• Contents: Sanding Discs; P800 (x2), P1200 (x2), P2000 (x2), M10 Male to Female Adaptor, 40g Polishing Paste (x2), 3ml Protection Liquid (x2), 3m x 20mm Masking Tape, Model No. Backing Pad M10 Female Thread, Sponge Discs; Orange, White.

SEA HRK01

• Slimline fan design, suitable for floor or desktop.

• Matte finish with built-in carry handle and up to 2 hour auto shut-off timer.

• Smooth running motor powers fan blades and oscillating gearbox to aid powerful and even air distribution.

• Fitted with 3-pin plug.

Super quality cast iron construction.

Replaceable steel jaws.

Features an anvil.

2-Year guarantee against Model No. breakage.

SEA CV150XT • Jaw Opening: 150mm.

• • • •

*Please refer to www.sealey.co.uk/guarantee for more information on guarantees.

35535_Intercars Summer 2020 48pp (english).indd 47

Model No. SEA STF30

47 28/02/2020 13:35:35

2000W Induction Heater

2300W Induction Heater Rapid Heat

Mobile induction heater for fast heat delivery.

Install appropriate coil and place over or around ferrous metal.

Ideal for loosening stubborn and seized fixings.

Supplied with special dent induction block for panel expansion and induction pad for plastic trim/sticker removal.

• Contents: Direct Coil; Ø20, Ø30mm, Side Coil; Ø20, Ø30mm, Pad Coil; Ø55mm, Flex Coil; 740mm, Model No. Induction Block - 50 x 35 x 30mm.

SEA VS230 • Supplied in storage case.

• • • •

1000W Induction Heater

• Mobile induction heater for fast heat delivery.

• Install appropriate coil and place over or around ferrous metal.

• Ideal for loosening stubborn and seized fixings.

• Supplied with induction pad for plastic trim/sticker removal.

• Induction element delivers high heat fast and effectively.

• Contents: Direct Coil; Ø20, Ø32mm, Pad Coil; Ø55mm, U-Coil; 430mm, Flex Coil; 830mm.

• Supplied in storage case.

Model No. SEA VS240

Mobile induction heater for fast heat delivery.

Install appropriate coil and place over or around ferrous metal.

Ideal for loosening stubborn and seized fixings.

Supplied with special dent induction block for panel expansion and induction pad for plastic trim/sticker removal.

• Contents: Direct Coil; Ø20mm, Direct Coil; Ø30mm, Side Coil; Ø20mm, Side Coil; Ø30mm, Pad Coil; Ø55mm, Flex Coil; 740mm, Model No. Induction Block; Ø32mm x 45mm, Pad Coil; Ø37mm.

SEA VS250 • Supplied in storage case.

• • • •

Induction Coil - Direct Ø15mm

Induction Coil - Side Ø15mm

• Induction coil for Model No’s. VS230 & VS250.

• Induction coil for Model No’s. VS230 & VS250.

Model No. SEA VS2301

Model No. SEA VS2302

Induction Coil - Direct Ø20mm

Induction Coil - Side Ø20mm

• Induction coil for Model No’s. VS230 & VS250.

• Induction coil for Model No’s. VS230 & VS250.

Model No. SEA VS2303

Model No. SEA VS2304

Induction Coil - Direct Ø30mm

Induction Coil - Side Ø30mm

Induction Coil - Direct Ø32mm

Induction Coil - Side Ø32mm

• Induction coil for Model No’s. VS230 & VS250.

• Induction coil for Model No’s. VS230 & VS250.

• Induction coil for Model No’s. VS230 & VS250.

• Induction coil for Model No’s. VS230 & VS250.

Model No. SEA VS2305

Induction Coil - Pad Ø55mm

Model No. SEA VS2306

Induction Coil Flex 920mm

• Induction coil for Model No’s.

VS230 & VS250.

• Induction coil for Model No’s. VS230 & VS250.

Model No. SEA VS2309

Model No. SEA VS2310

Model No. SEA VS2307

Model No. SEA VS2308

Induction Block

• Induction coil for Model No’s. VS230 & VS250.

Model No. SEA VS2311

Promotion Valid Until 30.09.2020 35535_Intercars Summer 2020 48pp (english).indd 48

28/02/2020 13:35:41