e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science Volume:02/Issue:09/September-2020
Impact Factor- 5.354
www.irjmets.com
PLANNING, ANALYSIS AND DESIGN OF MINISTER’S HEADQUARTER’S WITH STAAD- Pro Mr. A.H.L. Swaroop*1, K. Ravi Raj*2, K. Sai Bindu Chandrika*3, B. Naga Supriya*4, M.P.C. Sekhar*5, M. Rajeev*6 *1 Sr.Gr.
Assistant Professor (ME, (Ph.D.)), Dept. of CIVIL, GEC college Gudlavlleru, A.P India. *2,3,4,5,6Student,
Dept. of CIVIL, GEC college, Gudlavlleru, A.P, India.
ABSTRACT An assembly buildings need to embody the transparency between citizens and their government which reflects the critical democratic dating. This is not literal transparency, but is about the building's feeling of public ownership and accessibility. It must impart the tremendous opportunity of the country larger than the individual, however supportive and engaging-now not aggressive or oppressive. The effects of these calculations are provided in tabular shape and pattern calculations are furnished in element. The detailing of the building is carried out via the use of AutoCAD. Loads are calculated in step with provisions of is codes, manual evaluation become achieved by means of kani's approach and limit state technique became used for design and those effects have been in comparison with staad seasoned. Keywords: AutoCAD, IS codes, kani's approach, staad seasoned.
I.
INTRODUCTION
1.1 General Preferred civil engineering is a steam of engineering training that offers with the form of activities that are near widespread public problems including planning, design, construction and upkeep of bodily and biological look of environment. It no longer simplest indicates the most effective construction of building but also consists of engineering activities like water control, waste water treatment procedures, and geotechnical, environmental. Coming to the development standards, it in particular relies upon upon cost, time, and type of creation. 1.2. Aim of the project Goal of the mission the primary objective of this project is to gain enough knowledge in planning, evaluation, and design of constructing. Our undertaking deals with the making plans, analysis and design of minister's headquarters which turned into performed the use of automobile cad and staad pro. It's far a strengthened concrete framed shape inclusive of g+3 which has wheeler & automobile parking facility within the ground. Is 456:2000 codes is the simple code for popular production in concrete systems, for this reason all of the structural individuals are designed using restrict state method in accordance with the is 456:2000 code and design aids. The making plans of any constructing in India may be identified through country wide constructing code (NBC), subsequently the building is deliberate according with the national building code of India.
II.
PLANNING
The plan and detailing became drawn the use of automobile cad. The whole plot region together with the wall is 2859.28 sq.M. The building consists of g+3. The parking area is furnished within the floor of the building. The ground top of the building is 3.1 m. The peak of the parapet wall is 1m.The staircase is furnished together with raise with enough space.
www.irjmets.com
@International Research Journal of Modernization in Engineering, Technology and Science
[422]
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science Volume:02/Issue:09/September-2020
Impact Factor- 5.354
www.irjmets.com
2.1. Layout
2.2. Plan of first floor
www.irjmets.com
@International Research Journal of Modernization in Engineering, Technology and Science
[423]
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science Volume:02/Issue:09/September-2020
Impact Factor- 5.354
www.irjmets.com
2.3. Plan of second floor
2.4. Plan of third floor
www.irjmets.com
@International Research Journal of Modernization in Engineering, Technology and Science
[424]
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science Volume:02/Issue:09/September-2020
III.
Impact Factor- 5.354
www.irjmets.com
STAAD PRO MODELLING AND ANALYSIS
3.1 Bending Moments
3.2 Shear Force
www.irjmets.com
@International Research Journal of Modernization in Engineering, Technology and Science
[425]
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science Volume:02/Issue:09/September-2020
IV.
Impact Factor- 5.354
www.irjmets.com
DESIGN OF BEAMS, COLUMN, FOOTING AND STAIRCASE:
4.1 DESIGN OF BEAM Design of beam sectional vicinity: 230mm x 350mm concrete grade: m20 Steel used: fe415
4.2 DESIGN OF COLUMN Design of column sectional place: 250mm x 350mm concrete grade: m20 Metal used: fe415
www.irjmets.com
@International Research Journal of Modernization in Engineering, Technology and Science
[426]
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science Volume:02/Issue:09/September-2020
Impact Factor- 5.354
www.irjmets.com
4.3 DESIGN OF FOOTING:
4.4 DESIGN OF STAIRCASE: Layout of staircase: staircase kind= dog legged Top of ground= 3.1m Height of every flight= 1.55m Flight width=1.85m Rise=150mm Thread=250mm No. Of risers required=1.8/0.15=12 in each flight No. Of thread in every flight=12-1=11 Width of touchdown= 1.85m
www.irjmets.com
@International Research Journal of Modernization in Engineering, Technology and Science
[427]
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science Volume:02/Issue:09/September-2020
V.
Impact Factor- 5.354
www.irjmets.com
COMPARISION OF CONSEQUENCES
VI.
CONCLUSIONS
In this challenge “planning, analysis and designing of minister's Headquarters’”. All of the individuals of our team have discovered to plot a constructing by using regarding country wide constructing code of India.
The variation between the manual analysis values and the STAAD Pro analysis values is varying between 1.21 % to 5.45 %. For accuracy, we went for precise method of analysis i.e. We analyzed a vital body by using the use of kani's technique of analysis.. Used is-456:2000 &staad.Seasoned, for the design of the structural participants. I.E we've got observed the limit state approach of layout. The important factor that we done become referring to numerous books for designing and we are very lots satisfied with exposing to discipline of design
VII. [1] [2] [3] [4] [5] [6]
REFERENCES
R.C.C. DESIGNS by Dr. B.C.Punmia R.C.C. DESIGNS by Varghese Advanced reinforced concrete design by Dr. Krisnam Raju Strength of materials by Dr. R.k.Bansal Theory of structures by Dr. A.Ramamrutam Sp: 16 charts
www.irjmets.com
@International Research Journal of Modernization in Engineering, Technology and Science
[428]