CL
CL
3445
CL
7945
1500
CL 3000
CL CL CL CL CL CL CL CL CL CL CL CL CL 500 500 500
500 500 500 500 500
247
365
500 452 500
JOISTS
CL CL C C L L
BEARERS
CL
CL
1808
cross section: 100 x 100 height: 572
150
CL
458
305
2673*
CL CL
CL
PAD FOOTINGS
1374
CL N
OTHER INFORMATION + REFERENCE TABLE
MAX. ALLOWABLE SPACING (mm) 450
MAX. ALLOWABLE SPAN (mm)
[e.g. F7 unseasoned Cypress]
MATERIAL (stress grade + timber type)
F14 un-
450
gap between boards (mm): 6 Ref. Table: 4. Allowable decking board spans
single span:
Joists selected
cross section: 1. 400 x400 2. 500 x 500 depth: 1.200 2. 200
concrete
3900
N/A
Stump height abobe ground is 173 Ref. Table: Australian standards AS 2870- 2011 Residential Slabs & footings p. 80
If you cannot see the thick clipping plane is cutting through your desig properly linked to Tributary yourarea: viewport (see video Ref. Table:
reinforced concrete
- 19.4 sqm for 500 x 500 stump - 6.2 sqm for 400 x 400 stumps
Australian standards AS 2870- 2011 Residential Slabs & footings p. 80
The joists and bearers will videport. Instead DECK AREA CALCULATIONS: you will see dashed lines r Total surface area = area (left plane)+ area (middle plane) + area (right plane) structural members =(4233 x 2608) + (3850 x 4819) + (1350 x 4358) -(1500x 757) = 11039664 + 18553150 + 5883300 -(1500x 757) = 36173394- 1135500 = 34340614 = 34.340614 m^2
BEARER AND JOIST LAYOUT PLAN Scale: 1:50
2018 Semester 2
N/A
to support up J + Bseasoned Layout 1300 Gum Forto 4.5 kN point est Red maximum Display Mode cantilever: live load. 325 Ref. Table: Layout to InDesign - Plan and Sec continuous 6. Deck Joists, J + B Layout span: unseasoned. Layout Size: 280 1800x 250 maximum Scale: 1:50 Displaycantilever: Mode 450 If you cannot see the thicker lines 2/200 x 75 F14 Un1800 single span: Floor Load Layout to InDesign - Plan seasoned 3700 Width [FLW]: cutting through your design, make Gum formaximum 2400 est Red to your viewportcantilever: (see video) Layout 925 Size: x 250 continuous 280 Ref. Table: The joists and bearers not be v span: 7.will Deck Bear3900 ers, unseayou will see dashed represen maximum lines soned timber Scale: 1:50 cantilever:
CLCL
230
496
CL CL
CL
2466
Construction as Alchemy ARCH10002
150 x 50
F14 Unseasoned Merbau Timber decking
975
STUMPS
1303
2953
1166
1950
CL
484
CL
CL
500 500 500 500 492
35 x 120
CL
CL
CL
MEMBER SCHEDULE DECKING
HEIGHT (mm) x WIDTH (mm)
Additional notes: - All spacing of decking is 500 unless otherwise dimensioned. - * Span of bearers on engaged piers - All pad footings are 400 x 400 except for one 500 x 500 footings in the centre of deck
Studio Leader: Yi Lobachevski Studio: 07
Name: Jarel Cheah Student Number: 98651
Part 1B : Relaxation Deck
B1
8060 1450
CL
3050 300
section
Partial Site Plan Display Mode Layout to InDesign - Plan and Sections Layout Size: 200 x 160 Scale: 1:100 If you cannot see the thicker lines where the clipping plane is cutting through your design, make sure clipping is properly linked to your viewport (see video) section
2933
2
Deck Plan Display Mode Layout to InDesign - Plan and Sections Layout Size: 200 x 160 Scale: 1:50 If you cannot see the thicker lines where the clipping plane is cutting through your design, make sure clipping is properly linke to your viewport (see video)
461
1
elev
586
1329
96
4358 4819
4233
500
5200
797
1
CL
3560
2
elev
gap 2608
20
3850
20
Pond
1636
N
DECK PLAN
N
PARTIAL SITE PLAN
557
372 173
135
ELEVATION 1
ELEVATION 2
Scale: 1:50
Construction as Alchemy ARCH10002
Elevation 1 Display Mode Layout to InDesign - Elevations Layout Size: 200 x 80 Scale: 1:50
185
372
Edge detailing, 3 stacks of 35 x 120 timber
2140
Scale: 1:100
1582
Scale: 1:50
Post used as reference point. 200 x 200.
Scale: 1:50
2018 Semester 2
Studio Leader: Yi Lobachevski Studio: 07
Name: Jarel Cheah Student Number: 98651
Part 1B : Relaxation Deck
B2
557 600
200
400
172
557
172 200 150 35
Section 1 Display Mode Layout to InDesign - Plan and Sections Layout Size: 200 x 250 Scale: 1:20
500
SECTION 1 SHOWING EDGE
2018 Semester 2
400
1316
CL
SECTION 2 SHOWING EDGE
Scale: 1:20
Construction as Alchemy ARCH10002
CL
Scale: 1:20
Studio Leader: Yi Lobachevski Studio: 07
Name: Jarel Cheah Student Number: 98651
Part 1B : Relaxation Deck
B3
Timber Decking Runs along openings of wall.
Gap between timber decking and wall, 20
Timber decking alternated according to spacing of joists. No more than 5400
Concrete pad footings 400 x 200 x 400
steps Concrete steps compliant with Australian Standards 1657 with 135 rise and 300 run.
Edge Treatment Covers ends of decking board. Secured with studs
3D HERO VIEW
Construction as Alchemy ARCH10002
2018 Semester 2
Studio Leader: Yi Lobachevski Studio: 07
Name: Jarel Cheah Student Number: 98651
Part 1B : Relaxation Deck
B4
PERSPECTIVE 2
Perspective 1 Display Mode Layout to InDesign - Perspectives Layout Size: 200 x 120
Pad Footings All pad footings with area of 400 x 400, aligned together on edge of bearers
Perspective 1 Display Mode Layout to InDesign - Perspectives Layout Size: 200 x 120
Gap All joists have a gap of 20 between brick wall.
Steps Perspective 1 Mode align with Display top of deck. Layout to InDesign - Perspectives Layout Size: x 120 Overall height of 200 557
PERSPECTIVE 1
Engaged pier Single skin, height of 344
PERSPECTIVE 2 Bearer Ends with gap of 20 from wall with length of 1584.
Steps Inserted into cut out openings of 1450. Gap of 20 between deck recommended.
Perspective 3 Display Mode Layout to InDesign - Perspectives Layout Size: 200 x 120
Pad Footing Only pad footing with area of 500 x 500 placed in the middle for efficiency
Perspective 1 Display Mode Layout to InDesign - Perspectives Layout Size: 200 x 120
Bearers 3 separate bearers of 2/200 x 75 with varying lengths.
PERSPECTIVE 3 Construction as Alchemy ARCH10002
Engaged pier Single skin, height of 344
PERSPECTIVE 4 2018 Semester 2
Studio Leader: Yi Lobachevski Studio: 07
Name: Jarel Cheah Student Number: 98651
Part 1B : Relaxation Deck
B5