Basic Nuclear Reactor Safety Nuclear Safety Principles and Engineered Safety Systems Jeffrey A. Mahn Nuclear Engineer (Retired) Albuquerque, NM USA jamahn47@gmail.com
Focus of Nuclear Reactor Safety • All energy forms have upsides and downsides – nuclear energy is no exception • Nuclear energy’s upside – Enormous amount of energy produced by U-235 fission (~1.5 million times more energy per gram of fuel than hydrocarbon fuels)
• Nuclear energy’s downside – Energy from decay of radioactive fission products continues to produce heat in reactor fuel even after fission reaction is terminated (i.e., reactor shutdown) – Radioactive decay energy (heat) must be removed from reactor fuel to prevent overheating, melting, and release of radioactive material to the environment
Nuclear Fission Energy Disposition Mev Fission Fragment Kinetic Energy 168 Fission Neutron Kinetic Energy 5 Prompt Gamma Ray Energy 7 Fission Fragment Delayed Radiation Beta Particles 8 Gamma Rays 7 Radiative Capture Gamma Rays 5 Total 200
% 84 2.5 3.5 4 3.5 2.5 100
Approximately 7.5% of the total energy from U-235 fission is contained in beta particles and gamma rays emitted by radioactive fission fragments and their radioactive decay products.
Reactor Decay Heat Generation • Radioactive fission fragments and their radioactive decay products have half-lives ranging from seconds to millions of years • While decay heat generation drops off quickly as shorter half-life radioisotopes disappear, one week after reactor shutdown decay heat power is still ~1.5% of reactor operating power
Decay Heat
One week after reactor shutdown decay heat power is ~1.5% of operating power.
Nuclear Reactor Safety • Basic purpose of nuclear reactor safety is to maintain integrity of the multiple barriers to fission product release; supported by a three-level defense-indepth approach • Control strategies developed to facilitate steady-power operations and to limit severity and/or mitigate consequences of potential accidents
Defense-in-Depth Level 1 • Prevention – seeks to avoid completely those operational occurrences that could result in system damage, loss of fuel performance, and abnormal releases of radioactivity; prevention measures include – inherently stable operating characteristics such as negative reactivity feedback (nuclear criticality control) – known materials in components/structures – design safety margins – periodic testing and inspections – operational instrumentation and automatic controls – plant personnel training – quality assurance – safety assessment
Defense-in-Depth Level 2 • Protection – seeks to halt or deal with unlikely, low-probability incidents and operational occurrences that cause reactor shutdown and that may lead to minor fuel damage and small releases of radioactivity; protection measures include – – – – – –
fast shutdown (reactor trip) primary coolant system pressure relief system/component operational interlocks automatic monitoring and safety-system initiation transient operating guidelines and procedures measurement and control of radiation levels, doses, and effluent radioactivity
Defense-in-Depth Level 3 • Mitigation – seeks to limit the consequences of accidents if they occur despite prevention and protection measures; mitigation measures include – emergency feedwater system – emergency core cooling systems – emergency electrical power (diesel generators, station batteries, and inverters) – radioactivity containment structures – emergency planning
Nuclear Power Plant Operational Safety Objectives • Core reactivity control – neutron population control • Heat removal capability • Fission product containment
Light Water Reactor (LWR) Operational Reactivity Control
Reactor Neutron Population Neutron Balance Equation Rate of neutron Rate of Rate of Rate of population = neutron – neutron – neutron increase production absorption leakage or
Accumulation = Production – Losses
Neutron Multiplication Factor k =
neutron production neutron losses
Reactivity Defined • A nuclear system is “critical” when neutron
production and loss rates are equal (k = 1) • k – 1 represents “excess multiplication” of a system’s neutron population
• (k – 1)/k represents system “fractional excess multiplication,” or system “reactivity” (ρ)
Relationship Between k, ρ, and System Criticality Multiplication Factor Reactivity State of Criticality k>1
ρ>0
Supercritical
k=1
ρ=0
Critical
k<1
ρ<0
Subcritical
Too much neutron absorption; no sustained chain reaction (k < 1)
Constant neutron population (k = 1)
Too little neutron absorption; exponentially increasing neutron population (k > 1)
Reactivity Feedback Mechanisms • Cause reactor core reactivity to change as neutron level changes • Operate on short time scales and are very important to reactor operation and safety • Feedback mechanisms described as reactivity coefficients – rate of change of core reactivity with respect to rate of change of a feedback variable (e.g., fuel temperature, moderator temperature, moderator voids)
Pressurized Water Reactor (PWR) Reactivity Control • Short Term – Full-length control rods (within fuel assemblies) • Drive mechanisms on top of vessel • Provide routine power control • Contain neutron absorbing material – Boron carbide (B4C) – Au-In-Cd (80%-15%-5%)
• Intermediate/Long Term – Soluble neutron absorber (boric acid) in reactor coolant minimizes control rod use
PWR Fuel Assembly
PWR Reactivity Control (cont.) • Shutdown [Safety] Rods – Held out of reactor core – Used to terminate unanticipated reactor excursions and for planned shutdowns
• Burnable Neutron Absorber (Shim) Rods – Match reactor core fuel burnup (create relatively uniform neutron flux across core) – Reduce core power peaking (flatten energy generation profile across core) – Offset positive increase in moderator temperature coefficient of reactivity as reactor coolant soluble boron is used up
Boiling Water Reactor (BWR) Reactivity Control • Short Term – Control rod motion – Reactor coolant flow rate adjustment (preferred) • Negative reactor coolant (moderator) void feedback • Power varies directly with coolant flow rate
• Long Term/Large Change Control – Full-length control rods (between fuel assemblies) • Drive mechanisms on bottom of reactor vessel (avoids steam dryers and separators at top of vessel) • Provide routine power control • Contain B4C material
BWR Fuel Assembly
BWR “Fuel Module” Fuel Rod
Water Rod Control Blade
BWR Reactivity Control (cont.) • Long Term/Large-Change Control (cont.) – Burnable neutron absorber (Gadolinia) in fuel pellets • Several burnable neutron absorber rods per fuel assembly • Positioned to reduce power peaking in fuel assembly
LWR Operational Heat Removal
Boiling Water Reactor Power Plant
(Animation)
Pressurized Water Reactor Power Plant
(Animation)
LWR Shutdown Heat Removal
Nuclear Fission Energy Disposition Fission Fragment Kinetic Energy Fission Neutron Kinetic Energy Prompt Gamma Ray Energy Fission Fragment Delayed Radiation Beta Particles Gamma Rays Radiative Capture Gammas Total
Mev 168 5 7
% 84 2.5 3.5
8 7 5 200
4 3.5 2.5 100
Delayed radiation from fission fragment radioactive decay accounts for ~7.5% of total fission energy and continues to generate heat in the nuclear fuel material even after the fission process is terminated. This heat must be removed from the fuel material to prevent overheating.
Decay Heat Production Following Reactor Shutdown (WASH-1400)
Examples of Medium Half-Life Fission Products Half Life (years)
Decay Energy MeV
Decay Mode
155Eu
4.76
0.252
β,γ
85Kr
10.76
0.687
β,γ
113mCd
14.1
0.316
β
90Sr
28.9
2.826
β
30.23
1.176
β,γ
121mSn
43.9
0.390
β,γ
151Sm
90
0.077
β
Fission Product
137Cs
Long Half-Life Fission Products Half Life (years)
Decay Energy MeV
Decay Mode
99Tc
211,000
0.294
β
126Sn
230,000
4.050
β,γ
79Se
327,000
0.151
β
93Zr
1,530,000
0.091
β,γ
135Cs
2,300,000
0.269
β
107Pd
6,500,000
0.033
β
15,700,000
0.194
β,γ
Fission Product
129I
PWR Residual Heat Removal (RHR) System
BWR Residual Heat Removal System
LWR Fission Product Containment
Fission Product Retention Barriers Defense-in-Depth • Fuel Pellet • Fuel Pin Cladding • Primary Coolant System Boundary • Reactor Containment Building
Multiple Barriers Close-up of steam generator showing the 3rd Barrier
1st & 2nd Barriers Pellet & Fuel Rod Cladding
3rd Barrier Primary System Boundary
4th Barrier Reactor Containment
Nuclear Power Plant Operational Occurrence/Accident Safety Objectives • • • • •
Core reactivity control Reactor coolant inventory control Core heat removal capability Containment heat removal capability Radioactivity containment
Engineered Safety Features and Functions • Reactor Protection System – reactor trip (RT) terminates nuclear chain reaction (core reactivity control) • Emergency Core Cooling Systems (ECCS) – inject coolant into reactor vessel upon loss of reactor coolant inventory and remove heat from nuclear fuel (reactor coolant inventory control & core heat removal capability) • Post-Accident Heat Removal (PAHR) – removes heat from containment building (containment heat removal capability)
Engineered Safety Features and Functions (cont.) • Post-Accident Radionuclide Removal (PARR) – removes radionuclides from containment atmosphere and filters containment effluents (radioactivity containment) • Reactor Containment Building Integrity (CI) – prevents release of post-accident radioactivity (radioactivity containment)
Engineered Safety Features (ESFs)
Engineered Safety System Reliability • Reliability design principles and criteria assure protection and safety function availability at all times – System/component redundancy provides single-failure protection – System/component diversity provides common-mode failure protection – Physical separation provides protection against simultaneous loss (e.g., by fire or flood)
Fail-Safe Design Principle â&#x20AC;˘ Assures that systems and components designed to automatically return to safest condition upon failure or loss of power
Gen 2 vs. Gen 3+ Reactor Safety • Generation 2 reactor safety has inherent weakness – safety devices added to reactor plant design as result of accident considerations – safety dependent on active Defense-in-Depth Level 3 mitigation measures (see slide 10)
• Safety of Generation 3+ reactors is fundamental consideration of reactor plant design – passive safety makes use of gravity, natural circulation, high temperature resistance
Contact Information Jeffrey A. Mahn Nuclear Engineer (Retired) Albuquerque, NM USA jamahn47@gmail.com