*Kirlin's Compact Fluorescent Lighting Catalog 05-07FL by The Kirlin Company

Table of Contents - Page 1 of 3

Since 1895

For recent introductions, including LED, PL-H and Vandal Resistant designs, please visit www.kirlinlighting.com Renaissance: Advancement in the Science of Lighting

3-4

Photometry, Definitions and Cone of Light Key

Reflector & Housing Finishes, Trims, Lenses & Mounts

5-7

Type IC and Air Tight: The Kirlin Advantage

Lamp and Ballast Guide

Products: Features, Performance and Options

8 - 82

Description

Lamp Position

Maximum Wattage

Nominal Size*

Product Number

Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal

1 Triple 32 1 Triple 42 1 Triple 32 1 Triple 42 1 Triple 42 1 Triple 42 1 Triple 42 1 Triple 70 2 Triple 42 2 Triple 42 2 Triple 57 3 Triple 42

4" 6" 4" 6" 7" 6" 7" 9" 7" 9" 10" 10"

FRR-04001 FRR-06002 FRR-04003 FRR-06004 FRR-07005 FRR-06006 FRR-07007 FRR-09008 FRR-07009 FRR-09010 FRR-10011 FRR-10012

1 Triple 32 1 Triple 42 1 Triple 42 1 Triple 57 1 Triple 70 2 Triple 42 2 Triple 57 2 Triple 70 3 Triple 57 1 Triple 42 1 Triple 70 2 Triple 42

6" 6" 7" 7" 9" 7" 10" 11" 11" 7" 7" 7"

FRR-06013 FRR-06014 FRR-07015 FRR-07016 FRR-09017 FRR-07018 FRR-10019 FRR-11020 FRR-11021 FRR-07022 FRR-07023 FRR-07024

Page

RECESSED ROUND Open Downlights - Single Reflector Narrow Housing / Type IC Narrow Housing Type IC Type IC Type IC Type IC / Shallow Housing Type IC / Shallow Housing

* Size: Indicates aperture of trim for recessed fixtures and housing size (width x height) for surface and wall bracket fixtures.

: Air Tight optional.

Shallow Housing

8 9 10 11 12 13 14

Open & X-CELL Downlights - Dual Reflector Type IC / Shallow Housing Type IC / Shallow Housing Type IC

X-CELL / Type IC / Shallow X-CELL / Shallow Housing X-CELL / Shallow Housing

Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal

15 16 17 18 19 20 21

Open and Lensed Wall Washes and Adjustables Open Wall Wash / Shallow Open Wall Wash / Shallow Lensed Wall Wash / Type IC Lensed Wall Wash / Shallow Adjustable / Type IC Adjustable Adjustable

Horizontal Horizontal Horizontal Horizontal Vertical Horizontal Horizontal

1 Triple 57 2 Triple 42 1 Triple 42 1 Triple 57 1 Triple 42 1 Triple 57 2 Triple 42

7" 7" 6" 7" 7" 7" 7"

FRR-07025 FRR-07026 FRR-06027 FRR-07028 FRR-07029 FRR-07030 FRR-07031

Horizontal Horizontal Horizontal Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal

1 Triple 32 1 Triple 26 1 Triple 42 1 Triple 32 1 Triple 32 1 Triple 42 1 Triple 70 2 Triple 42 2 Triple 57 2 Triple 70 3 Triple 57 1 Triple 70 2 Triple 42

5" 6" 6" 6" 6" 7" 8" 8" 11" 11" 11" 8" 8"

FRR-05032 FRR-06033 FRR-06034 FRR-06035 FRR-06036 FRR-07037 FRR-08038 FRR-08039 FRR-11040 FRR-11041 FRR-11042 FRR-08043 FRR-08044

22 23 24 25

Lensed Downlights Dead Front / Type IC / Shallow Super Shallow / Type IC Super Shallow Narrow Housing / Type IC Type IC / Shallow Housing Type IC / Shallow Housing Shallow Housing Shallow Housing

Concrete Pour Concrete Pour

26 27 28 29 30 31 32 33

Table of Contents - Page 2 of 3

Since 1895

Description

Lamp Position

Maximum Wattage

Nominal Size*

Product Number

Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal

1 Triple 26 1 Triple 42 1 Triple 42 1 Triple 42 1 Triple 42 2 Triple 57 3 Triple 57 1 Triple 70 2 Triple 42 3 Triple 42 1 Triple 42 2 Triple 32

6" x 10" 6" x 15" 9" x 13" 9" x 13" 9" x 8" 12" x 16" 12" x 20" 12" x 10" 12" x 10" 12" x 16" 12" x 7" 12" x 7"

FSR-06045 FSR-06046 FSR-09047 FSR-09048 FSR-09049 FSR-12050 FSR-12051 FSR-12052 FSR-12053 FSR-12054 FSR-12055 FSR-12056

Horizontal Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal

1 Triple 42 1 Triple 26 1 Triple 42 1 Triple 42 1 Triple 70 2 Triple 32 2 Triple 42 2 Triple 57 3 Triple 42

12" x 4" 6" x 10" 9" x 13" 9" x 5" 12" x 8" 12" x 6" 12" x 8" 12" x 16" 12" x 16"

FSR-12057 FSR-06058 FSR-09059 FSR-09060 FSR-12061 FSR-12062 FSR-12063 FSR-12064 FSR-12065

41 42

Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal

2 Triple 2 Triple 2 Triple 2 Triple 2 Triple 4 Triple 2 Triple 4 Triple

6" x 18" 9" x 19" 6" x 18" 9" x 19" 12" x 16" 12" x 16" 12" x 16" 12" x 16"

FWR-06066 FWR-09067 FWR-06068 FWR-09069 FWR-12070 FWR-12071 FWR-12072 FWR-12073

Pages

SURFACE ROUND Open, Flare and X-CELL Downlights

Flare Trim

Flare Trim Flare Trim Flare Trim X-CELL X-CELL

35 36 37 38 39 40

Lensed Downlights

44 45

WALL BRACKET ROUND - DIRECT/INDIRECT Open Open / Flare Trim Regressed Lens Regressed Lens Open / Flare Trim Open / Flare Trim Regressed Lens Regressed Lens

32 42 32 42 70 42 70 42

47 48 49

VANDAL RESISTANT ROUND: NEW 7" and 8" available. See www.kirlinlighting.com Recessed / Type IC / Shallow Recessed / Shallow Housing Recessed / Shallow Housing Recessed Surface

Horizontal Horizontal Horizontal Horizontal Horizontal

1 Triple 42 1 Triple 70 2 Triple 32 2 Triple 42 2 Triple 42

10" 10" 10" 12" 12" x 8"

FRV-10074 FRV-10075 FRV-10076 FRV-12077 FSV-12078

Vertical Vertical Vertical Vertical Vertical Vertical

85 QL 165 QL 85 QL 85 QL 85 QL 165 QL

10" 11" 8" 11" 12" x 16" 15" x 24"

QRR-10079 QRR-11080 QRR-08081 QRR-11082 QSR-12083 QPR-15084

51 52

QL (INDUCTION) ROUND Recessed / Open Recessed / Open Recessed / Regressed Lens Recessed / Regressed Lens Surface / Open Flare Pendant / Open Flare

Product Numbering Guide

Lamp Fluorescent LED QL

Mount Pendant Recessed Surface Wall Bracket Nightlight

54 55

Example: F R R - 0 4 0 0 1 - 4 3

Shape Round Square T: Rectangle Vandal Resistant

cd e f g Trim / Housing Size f Nominal g Numeric h 04 = 4" 08 = 8" 12 = 12" Sequence 05 = 5" 06 = 6" 07 = 7"

09 = 9" 10 = 10" 11 = 11"

13 = 13" 15 = 15"

in Catalog

Options: Add after catalog number

: Air Tight optional.

* Size: Indicates aperture of trim for recessed fixtures and housing size (width x height) for surface and wall bracket fixtures.

Super Shallow Regressed Lens Regressed Lens Regressed Lens Regressed Lens Regressed Lens Regressed Lens Regressed Lens Regressed Lens

Table of Contents - Page 3 of 3

Since 1895 Lamp Position

Description

Maximum Wattage

Nominal Size*

Product Number

1 Triple 42 1 Triple 42 1 Triple 32 1 Triple 42 2 Triple 32 2 Triple 57 2 Triple 42

4" x 4" 6" x 6" 4" x 4" 6" x 6" 6" x 6" 9" x 9" 9" x 9"

FRS-04085 FRS-06086 FRS-04087 FRS-06088 FRS-06089 FRS-09090 FRS-09091

1 Triple 57 1 Triple 70 2 Triple 42

4" x 8" 6" x 11" 6" x 11"

FRT-04092 FRT-06093 FRT-06094

1 Triple 42 1 Triple 42 1 Triple 57 1 Triple 70 2 Triple 32 2 Triple 42

4" x 4" 6" x 6" 4" x 8" 6" x 11" 6" x 6" 6" x 11"

FRS-04095 FRS-06096 FRT-04097 FRT-06098 FRS-06099 FRT-06100

Pages

RECESSED SQUARE Square Open Appearance Downlights Type IC Type IC Shallow Housing Shallow Housing Shallow Housing X-CELL / Shallow Housing

Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal

56 57 58 59

Rectangular Open Appearance Downlights Shallow Housing

Horizontal Horizontal Horizontal

60 61

* Size: Indicates aperture of trim for recessed fixtures and housing size (width x height) for surface and wall bracket fixtures.

: Air Tight optional.

Square & Rectangular Lensed Wall Wash Square / Shallow Housing Square / Shallow Housing Rectangle / Shallow Housing Rectangle Square / Shallow Housing Rectangle

Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal

62 63 64

Square & Rectangular Lensed Downlights Regressed / Type IC / Shallow Regressed / Type IC / Shallow Regressed / Shallow Housing Regressed / Shallow Housing Regressed / Shallow Housing Regressed K-Lens / Type IC / Shallow K-Lens / Shallow Housing K-Lens K-Lens Rectangle K-Lens / Shallow Rectangle Regressed Lens

Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal

1 Triple 32 1 Triple 42 1 Triple 42 1 Triple 57 2 Triple 42 2 Triple 57 1 Triple 42 2 Triple 42 2 Triple 57 3 Triple 32 1 Triple 57 1 Triple 70

6" x 6" 8" x 8" 6" x 6" 8" x 8" 9" x 9" 11" x 11" 8" x 8" 10" x 10" 10" x 10" 12" x 12" 6" x 12" 6" x 11"

FRS-06101 FRS-08102 FRS-06103 FRS-08104 FRS-09105 FRS-11106 FRS-08107 FRS-10108 FRS-10109 FRS-12110 FRT-06111 FRT-06112

Regressed Lens Regressed Lens K-Lens K-Lens

Horizontal Horizontal Horizontal Horizontal

2 Triple 2 Triple 1 Triple 2 Triple

32 57 42 42

13" x 6" 13" x 9" 10" x 5" 13" x 6"

FSS-13113 FSS-13114 FSS-10115 FSS-13116

Open Regressed Lens K-Lens

Vertical Horizontal Horizontal

2 Triple 42 4 Triple 57 4 Triple 57

7" x 22" 13" x 22" 13" x 22"

FWS-07117 FWS-13118 FWS-13119

74 75

Recessed / Shallow Housing Surface

Horizontal Horizontal

2 Triple 57 2 Triple 57

12" x 12" 12" x 5"

FRV-12120 FSV-12121

66 67 68 69 70 71

SURFACE SQUARE

WALL BRACKET SQUARE

VANDAL RESISTANT SQUARE

NIGHTLIGHTS: NEW LED designs available. Please visit www.kirlinlighting.com Single Face / Type IC Single Face / Battery Pack Single Face / Type IC Rectangular Square Thru-the-Wall / Type IC Thru-the-Wall / Type IC Security Security

Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal

1 Quad 13 1 Quad 13 LED LED LED 2 Quad 13 LED 1 Quad 13 LED

7" x 10" 9" x 14" 7" x 10" 3" x 7" 5" x 5" 7" x 10" 7" x 10" 7" x 9" 7" x 9"

FNT-07122 FNT-09123 LNT-07124 LNT-03125 LNS-05126 FNT-07127 LNT-07128 FNV-07129 LNV-07130

77 78 79 80 81 82

Since 1895

Renaissance: Advancement in the Art and Science of Lighting 110 YEARS of INTEGRITY, QUALITY and VALUE Founded in 1895 by Otis Merritt Kirlin, The Kirlin Company is the nation’s oldest and most experienced independent lighting fixture manufacturer. Under the leadership of John Kirlin and Don Davis, rapid innovation, responsive customization, high standard quality and the highest level of customer service became Kirlin’s Hallmarks. This has and will continue to set us apart from the conglomerate mentality. We continue to build on this outstanding legacy of integrity, quality and value. This catalog is dedicated to these two Renaissance men, upon whose shoulders we reach for the highest levels of excellence.

John A. Kirlin

Donald W. Davis

Since the introduction of Kirlin’s first compact fluorescent lighting fixtures in 1984, our company has maintained its leadership in the compact fluorescent market through the development of hundreds of unique luminaires which incorporate each progressive step in energy-efficient lamp and ballast technological improvements. The result is this Renaissance Collection of 130 Kirlin luminaires which deliver maximum performance, aesthetic sophistication and energy efficiency. Whether the design goal is superior visual comfort or Type IC Air Tight construction, Kirlin’s expertise is unparalleled.

THE BENEFITS OF HORIZONTAL LAMP BURN POSITION

THE BENEFITS OF ALUMINUM HOUSINGS

Compact fluorescent lamp manufacturers have confirmed that vertical vs. horizontal lamp burn positions produce identical lamp performance. Lumen output, lumen maintenance, end of life protection, color and other performance characteristics are the same regardless of the burn position. However, a horizontal compact fluorescent lamp (CFL) burn position usually has significant advantages when compared to a vertical lamp position. The key to achieving these advantages is through Kirlin’s superior fixture design and material usage.

An important advantage of a horizontal burn position is a shallower fixture design. However, with smaller housings, heat becomes a more difficult challenge to address.

With a reflector and cone properly designed for a horizontal lamp burn position, the following benefits are realized:

MAXIMUM PERFORMANCE: Fluorescent lamps and ballasts are designed to operate optimally at designated temperatures. As temperatures start to rise above this, lumen output of the fixture is reduced.

Many outdoor and even indoor applications will experience very high ambient temperatures where lamp/ballast life and lumen output may start to decrease appreciably. The result often is premature lamp and ballast failure along with a fixture that does not perform to the manufacturer’s published standards.

VALUE: The number of fixtures required to light the space is reduced.

VISUAL COMFORT: Excellent cut-off and greater visual comfort are realized.

LONGER LIFE: By keeping the interior of the fixture cool, component life is dramatically increased. This is even more important with high wattage compact fluorescent lamps.

INSTALLATION EASE: With a horizontal lamp burn position and Kirlin's housing design, the fixture height may be reduced by up to 70% over steel fixtures. This greatly facilitates installation into shallow plenums. In addition, aluminum’s lighter weight reduces installation time and cost due to much easier handling and ceiling load requirements.

PERFORMANCE: Wider distribution and higher fixture efficiencies are achieved.

HOUSING DEPTH: Housings are shallower and suitable for even the most congested ceilings.

Kirlin’s all-aluminum "box" construction provides maximum surface area and superior heat dissipation qualities over steel. By doing so the following benefits are realized:

Luminaire: FSR-12062 FIRST Place ~ Manchester, New Hampshire Architecture and Lighting Design: Lavellee/Brensigner Architects

Kirlin superior designs incorporating all aluminum construction, horizontal compact fluorescent burn position, optimized optics, and unique heat management properties, permit shallow fixture housings and superior photometric performance.

Renaissance: Advancement in the Art and Science of Lighting

Since 1895

SPECIALIZED ENERGY EFFICIENT DESIGNS and APPLICATIONS Our newest Compact Fluorescent Catalog offers 130 luminaires, incorporating the newer 57 and 70 watt lamps in addition to industry standard 18/26 watt quad and 18/26/32/42 multiwattage/voltage triple tube lamps. You will also find other novel sources of energy efficient lighting: QL Induction and LED luminaires. Furthermore, Kirlin’s strength in designing solutions for special applications provides you with an even greater range of opportunity and service. Several categories are worth highlighting:

VANDAL RESISTANT: Kirlin’s high abuse compact fluorescent products combine the most innovative lamp and ballast technologies with vandal resistant features and architecturally pleasing designs. Utilizing polycarbonate lens, tamper-proof fasteners with trim retention to the full housing, these fixtures are as durable as they are attractive.

TYPE IC: Type IC fixtures are designed to be installed in direct contact with insulation thereby minimizing the amount of uninsulated plenum space and significantly reducing energy costs. It has been proven* that if only 4.2% of a ceiling is uninsulated, heat loss increases a disproportionate 34%! Kirlin's numerous Type IC listed fixtures are identified in the Table of Contents and featured on the product pages.

TYPE IC AIR TIGHT HOUSING: To maximize energy efficiency, some states (i.e. Washington State) require less than 2 cfm of air flow through the fixture. By minimizing air flow through the fixture, "conditioned" air will not pass from the conditioned space into the plenum. Energy costs are thereby reduced. Kirlin offers a variety of recessed round and square luminaires with an “-AT” option and delineated as “Air Tight” in the product description.

Luminaire: FRV-12120 Comerica Park ~ Detroit, Michigan Architecture: Hellmuth, Obata + Kassabaum, Inc. Lighting Design: Illuminating Concepts

DIRECT/INDIRECT: Building on our leadership in direct/indirect lighting, this catalog contains both cylinders and squares which provide down lighting and up lighting for indoor and outdoor applications.

CUSTOM FINISH: Option -94 is frequently desired to complete an award-winning design.

LOOK-ALIKE TRIMS: Kirlin offers matching trim styles, sizes, shapes and mounts. This is true not only within this Compact Fluorescent Catalog, but across our HID, Incandescent and Specialty product lines as well. This allows specifiers to mix sources, wattages, sizes and mounts while maintaining uniform style and appearance.

CUSTOM DESIGN: Kirlin’s custom design expertise has developed solutions for varied lighting objectives. Our luminaire design capabilities are available for resolving customers unique lighting needs. Luminaire: FRS-08107

Luminaire: FRR-06036

Ohio Judicial Center, The Supreme Court of Ohio ~ Columbus, Ohio Architecture and Lighting Design: SchooleyCaldwell Associates Photography: Brad Feinknopf, Feinknopf Photography

*Tests conducted by the U.S. Naval Civil Engineering Laboratory for the Johns-Manville Corporation.

Since 1895

Kirlin Classic Glow Rings: Option -33 for Select Luminaires Kirlin Glow Rings are made with the same high quality materials and craftsmanship that Kirlin has been known for since 1895. Kirlin Glow Rings are available for all products in this catalog that identify -33 in their respective Options section. To order your own Kirlin Glow Ring (1) add -33 to the product number, (2) use the chart below and (3) add 1 option from each of the 7 components listed. For example: FRR-04001-33-GLM-1L-FRR-ROF-BRF-ROSBRS If you chose a custom color, please supply a color sample. To order a custom Glow Ring, please use -99 and specify each component individually.

1. Ring Material (choose one)

Glass (-GLM)

Acrylic (-ACM)

Custom (-CUM)

1 Ring (-1L)

2 Rings (-2L)

3 Rings (-3L)

Frosted Ring (-FRR)

Clear Ring (-CRR)

Solid Disk (-SDR)

Round (-ROF)

Knurled (-KNF)

Cone (-COF)

Brass (-BRF)

Silver (-SIF)

Black (-BLF)

White (-WHF)

Custom (-CUF)

Round (-ROS)

Hexagonal (-HOS)

Brass (-BRS)

Silver (-SIS)

Black (-BLS)

White (-WHS)

Custom (-CFS)

2. # of Rings (choose one)

3. Ring Design (choose one)

4. Finial Design

Frosted Center (-FCR)

Frosted Disk (-FDR)

(choose one)

5. Finial Color (choose one)

6. Standoff Design (choose one)

7. Standoff Color (choose one)

Reflector Finishes, Luminaire Trims and Lenses Alzak速 Reflector Finishes

Since 1895

Luminaire Trims and Lenses

Clear Specular

Champagne Gold SofTex Option -90

White Smooth Flare Option -40

Black OptiGroove with Tempered Prismatic

Glass or Acrylic Glow Ring Option -33

Clear SofTex Option -70

Dune SofTex Option -71

Polycarbonate Dead Front Trim & Lens

Opal Glass Option -18

Tempered K-Lens

Pewter SofTex Option -57

Wheat SofTex Option -91

Convex Polycarbonate Option -CV

Fresnel Option -FR

Vandal Resistant Drop Polycarbonate

Titanium SofTex Option -77

White Flange Option -31

Wall Wash Option -WW

White Aluminum Eggcrate Option -20

Vandal Resistant Flat Option -13

Black OptiGroove Option -OG

All White Option -30

Double Wall Wash Option -DW

Tamperproof Trim & Lens Options -26-27

Custom Finish Option -94

Nightlights

White LED or Compact Fluorescent Louver

High Strength Acrylic Lens Option -17

Hospital Grade On-Off Switch Option -34

Hospital Grade GFCI Outlet Option -GF

Vandal Resistant Lens Option -17

Orange LED Option -OR

Green LED Option -GN

Blue LED Option -BL

Yellow LED Option -YE

Red LED Option -RA

White LED

Green LED Option -GN

Blue LED Option -BL

Yellow LED Option -YE

Red LED Option -RA Alzak速 is a registered trademark of ALCOA.

Housing Finishes and Mounts

Since 1895

Housing Finishes

Housing Mounts and Other Options

Sloped Ceiling Adapter Option -82

White Acrylic Enamel

Surface Junction Box Collar Option -80

QuickMount Option -QM

Top Access Option -TA

Aluminum Acrylic Enamel Option -35

Pendant Option -PM

Pendant for Direct/Indirect Option -PM

Black Acrylic Enamel Option -38

Wall Bracket Option -WB

WeatherCaps Options -86 or -89

Dark Bronze Acrylic Enamel Option -37

Gold Acrylic Enamel Option -36

Custom Cylinder Cluster Option -99

Custom Cylinder Cluster Configurations Option -99

FRR-04001 - Type IC FRR-06002

1 Triple

32 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

Since 1895

Inconspicuous Open Downlights with Super Narrow Recessed Housing Aluminum Housing: Only 7” Wide • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC. FRR-04001 approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

Glow Ring Option -33

SofTex Dune Option -71

SofTex Gold Option -90

SofTex Wheat Option -91

Wall Wash Option -WW

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FRR-04001: 32/26W triple. FRR-06002: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-04001 (1 Triple 32W)

FRR-04001: Type IC

90˚ 75˚

Ceiling Cut-out 5" Dia.

250 500

60˚ 45˚

750 0˚

Dist. 6 8 10 12 14 16

FC 16.6 9.4 6.0 4.2 3.1 2.3

Dia. 7.7 10.3 12.9 15.4 18.0 20.6

0° SC 1.3 15˚ 30˚ 45° SC 1.3 EFFICIENCY: 46.0% 90° SC 1.3 ITL TEST #54822 LER=30.7 AEC=$7.81

90˚ 75˚ 400

Ceiling Cut-out 6¾" Dia.

800 1200 0˚

75˚ 200

60˚

400

45˚

600 0˚

60˚ 45˚

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

Dist. 6 8 10 12 14 16

FC 26.6 15.0 9.6 6.7 4.9 3.7

-HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims -31 White acrylic enameled reflector flange. -32 White oversize trim ring. Specify O.D. -33 Decorative Glow Ring suspended beneath trim assembly for FRR-06002. See page 5. -45 Gasket between ceiling and reflector flange. -70 SofTex Clear reflector. (CP x .89) -71 SofTex Dune reflector. (CP x .85) -79 Extension collar for ceilings up to 2” thick for FRR-04001. -90 SofTex Champagne Gold reflector. (CP x .88) -91 SofTex Wheat reflector. (CP x .83) -94 Custom color/finish. Specify. Consult factory. -OG OptiGroove black seamless tapered aluminum reflector with white flange for FRR-06002. (CP x .80) -WW Wall wash. (See Additional Photometry p. 83)

Visit www.kirlinlighting.com for most current performance / specifications.

* Additional Photometry, Definitions and Keys begin on page 83.

15˚

Dia. 7.3 9.7 12.2 14.6 17.0 19.4

30˚

EFFICIENCY: 51.8% ITL TEST #54937

Cone of Light* Dist. 6 8 10 12 14 16

FC 14.3 8.1 5.2 3.6 2.6 2.0

Dia. 7.8 10.4 12.9 15.5 18.1 20.7

0° SC 1.3 45° SC 1.3 90° SC 1.3 LER=35.4 AEC=$6.78

FRR-06002 (1 Triple 32W) 90˚

Cone of Light*

0° SC 1.3 15˚ 30˚ 45° SC 1.3 EFFICIENCY: 46.9% 90° SC 1.2 ITL TEST #48597 LER=35.1 AEC=$6.84

90˚

FRR-06002 (1 Triple 42W)

FRR-06002

FRR-04001 (1 Triple 26W)

Cone of Light*

75˚ 300

60˚

600

45˚

900 0˚

15˚

30˚

EFFICIENCY: 49.5% ITL TEST #48595

Cone of Light* Dist. 6 8 10 12 14 16

FC 21.1 11.9 7.6 5.3 3.9 3.0

Dia. 7.3 9.7 12.2 14.6 17.1 19.5

0° SC 1.3 45° SC 1.3 90° SC 1.2 LER=34.6 AEC=$6.94

ShatterGuard™ Shield (Beneath Lamp) -17 .187” prismatic high strength acrylic for FRR-06002. -SG .125” clear polycarbonate for FRR-06002.

Top Access -TA Top access for servicing from above.

Other -99 Special modification. Consult factory. -AT Air tight with Type IC For FRR-04001. Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

32 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

Type IC - FRR-04003 Type IC - FRR-06004

Type IC 4” and 6” Aperture with Optional Air Tight Design Features Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FRR-04003: 32/26W triple. FRR-06004: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000

hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC. Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

90˚ 75˚

Ceiling Cut-out 5" Dia.

250

60˚

500 750 0˚

Wall Wash Option -WW

45˚ 15˚

FRR-04003 (1 Triple 26W)

Dist. 6 8 10 12 14 16

FC 16.6 9.4 6.0 4.2 3.1 2.3

Dia. 7.7 10.3 12.9 15.4 18.0 20.6

90˚

30˚

75˚ 200

60˚

400

45˚

600 0˚

90˚ 75˚ 400

Ceiling Cut-out 6½" Dia.

800 1200 0˚

60˚ 45˚

FC 26.6 15.0 9.6 6.7 4.9 3.7

Dia. 7.3 9.7 12.2 14.6 17.0 19.4

Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

30˚

ITL TEST #54937

Cone of Light* Dist. 6 8 10 12 14 16

FC 14.3 8.1 5.2 3.6 2.6 2.0

Dia. 7.8 10.4 12.9 15.5 18.1 20.7

0° SC 1.3 45° SC 1.3 90° SC 1.3 LER=35.4 AEC=$6.78

FRR-06004 (1 Triple 32W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

0° SC 1.3 15˚ 30˚ 45° SC 1.3 EFFICIENCY: 46.9% 90° SC 1.2 ITL TEST #48597 LER=35.1 AEC=$6.84

Options†

15˚

EFFICIENCY: 51.8%

FRR-06004 (1 Triple 42W)

FRR-06004: Type IC

75˚ 300

60˚

600

45˚

900 0˚

15˚

30˚

EFFICIENCY: 49.5% ITL TEST #48595

Cone of Light* Dist. 6 8 10 12 14 16

FC 21.1 11.9 7.6 5.3 3.9 3.0

Dia. 7.3 9.7 12.2 14.6 17.1 19.5

0° SC 1.3 45° SC 1.3 90° SC 1.2 LER=34.6 AEC=$6.94

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-WW Wall wash. (See Additional Photometry p. 83)

Trims

-17 .187” prismatic high strength acrylic for FRR-06004. -SG .125” clear polycarbonate for FRR-06004.

-31 White acrylic enameled reflector flange. -32 White oversize trim ring. Specify O.D. -33 Decorative Glow Ring suspended beneath trim assembly for FRR-06004. See page 5. -45 Gasket between ceiling and reflector flange. -70 SofTex Clear reflector. (CP x .89) -71 SofTex Dune reflector. (CP x .85) -79 Extension collar for ceilings up to 2” thick. -82 Sloped ceiling adapter for FRR-06004. Specify slope in 5º increments up to 30º. -90 SofTex Champagne Gold reflector. (CP x .88) -91 SofTex Wheat reflector. (CP x .83) -94 Custom color/finish. Specify. Consult factory. -OG OptiGroove black seamless tapered aluminum reflector with white flange for FRR-06004. (CP x .80)

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

SofTex Wheat Option -91

Cone of Light*

0° SC 1.3 45° SC 1.3 EFFICIENCY: 46.0% 90° SC 1.3 ITL TEST #54822 LER=30.7 AEC=$7.81

SofTex Gold Option -90

FRR-04003 (1 Triple 32W)

FRR-04003: Type IC

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

SofTex Dune Option -71

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

Emergency Ballast - Specify Voltage1

Glow Ring Option -33

ShatterGuard™ Shield (Beneath Lamp)

Top Access -TA Top access for servicing from above.

Other -99 Special modification. Consult factory. -AT Air tight with Type IC. Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7.

* Additional Photometry, Definitions and Keys begin on page 83.

FRR-07005 - Type IC

1 Triple

Since 1895

42 WATT MAXIMUM

Type IC Versatile 42 Watt with Optional Air Tight Design Features

Glow Ring Option -33

SofTex Dune Option -71

SofTex Gold Option -90

SofTex Wheat Option -91

Wall Wash Option -WW

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC. Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-07005: Type IC

FRR-07005 (1 Triple 32W)

FRR-07005 (1 Triple 42W) 90˚ 75˚ 500

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 50.9% ITL TEST #55411

90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 33.5 18.9 12.1 8.4 6.2 4.7

Dia. 6.5 8.7 10.9 13.0 15.2 17.4

0° SC 1.1 45° SC 1.0 90° SC 1.0 LER=38.1 AEC=$6.30

75˚ 450

60˚

900

45˚

1350 0˚

15˚

30˚

EFFICIENCY: 52.2% ITL TEST #55412

Cone of Light* Dist. 6 8 10 12 14 16

FC 31.0 17.4 11.1 7.7 5.7 4.4

Dia. 6.1 8.2 10.2 12.3 14.3 16.4

0° SC 1.0 45° SC 1.0 90° SC 1.0 LER=33.2 AEC=$7.24

Ceiling Cut-out 8" Dia.

Options† Ballast, Wattage and Voltage

Trims

ShatterGuard™ Shield (Beneath Lamp)

-39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-31 White acrylic enameled reflector flange. -32 White oversize trim ring. Specify O.D. -33 Decorative Glow Ring suspended beneath trim assembly. See page 5. -45 Gasket between ceiling and reflector flange. -70 SofTex Clear reflector. (CP x .89) -71 SofTex Dune reflector. (CP x .85) -79 Extension collar for ceilings up to 2” thick. -82 Sloped ceiling adapter. Specify slope in 5º increments up to 30º. -90 SofTex Champagne Gold reflector. (CP x .88) -91 SofTex Wheat reflector. (CP x .83) -94 Custom color/finish. Specify. Consult factory. -OG OptiGroove black seamless tapered aluminum reflector with white flange. (CP x .80) -WW Wall wash. (See Additional Photometry p. 83)

-17 .187" prismatic high strength acrylic. -SG .125" clear polycarbonate.

Visit www.kirlinlighting.com for most current performance / specifications.

* Additional Photometry, Definitions and Keys begin on page 83.

Top Access -TA Top access for servicing from above.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

42 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

Type IC - FRR-06006 Type IC - FRR-07007

Type IC Shallow Plenum 42 Watt Features Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes. Aluminum Housing: Shallow 6” Depth • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

Glow Ring Option -33

SofTex Dune Option -71

SofTex Champagne Gold Option -90

SofTex Wheat Option -91

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FRR-06006: Type IC

FRR-06006 (1 Triple 42W) 90˚ 75˚ 350

Ceiling Cut-out 6½" Dia.

60˚

700

45˚

1050 0˚

FRR-06006 (1 Triple 32W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 24.2 13.6 8.7 6.1 4.4 3.4

Dia. 8.1 10.8 13.4 16.1 18.8 21.5

0° SC 1.4 15˚ 30˚ 45° SC 1.3 EFFICIENCY: 49.5% 90° SC 1.3 ITL TEST #55111 LER=28.1 AEC=$8.53

75˚ 300

60˚

600

45˚

900 0˚

90˚ 75˚ 450

Ceiling Cut-out 8" Dia.

60˚

900

45˚

1350 0˚

15˚

30˚

EFFICIENCY: 61.7% ITL TEST #54831

FC 35.7 20.1 12.9 8.9 6.6 5.0

Dia. 7.9 10.5 13.1 15.7 18.4 21.0

0° SC 1.3 90° SC 1.3 180° SC 1.3 LER=40.7 AEC=$5.90

Dia. 8.1 10.8 13.4 16.1 18.8 21.5

FRR-07007 (1 Triple 32W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 22.0 12.4 7.9 5.5 4.0 3.1

0° SC 1.4 15˚ 30˚ 90° SC 1.3 EFFICIENCY: 59.7% 180° SC 1.3 ITL TEST #54824 LER=39.7 AEC=$6.05

FRR-07007 (1 Triple 42W)

FRR-07007: Type IC

Cone of Light* Dist. 6 8 10 12 14 16

75˚ 400

60˚

800

45˚

1200 0˚

15˚

30˚

EFFICIENCY: 66.9% ITL TEST #54832

Cone of Light* Dist. 6 8 10 12 14 16

FC 30.6 17.2 11.0 7.6 5.6 4.3

Dia. 7.7 10.2 12.8 15.3 17.9 20.4

0° SC 1.3 90° SC 1.3 180° SC 1.2 LER=42.8 AEC=$5.61

-73 Internal 1-lamp EM ballast. Specify voltage. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only Specify voltage.

Trims -31 White acrylic enameled reflector flange. -32 White oversize trim ring. Specify O.D. -33 Decorative Glow Ring suspended beneath trim assembly. See page 5. -45 Gasket between ceiling and reflector flange. -70 SofTex Clear reflector. (CP x .89) -71 SofTex Dune reflector. (CP x .85) -79 Extension collar for ceilings up to 2” thick.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

-82 Sloped ceiling adapter. Specify slope in 5º increments up to 30º. -90 SofTex Champagne Gold reflector. (CP x .88) -91 SofTex Wheat reflector. (CP x .83) -94 Custom color/finish. Specify. Consult factory. -OG OptiGroove black seamless tapered aluminum reflector with white flange. (CP x .80)

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 11

FRR-09008

1 Triple

Since 1895

70 WATT MAXIMUM

Outstanding Efficiency for Shallow Plenum with 70 Watt or 57 Watt (Option -43) Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

Glow Ring Option -33

SofTex Dune Option -71

SofTex Champagne Gold Option -90

SofTex Wheat Option -91

Lamp • Designed for one 4-pin triple/four tube amalgam compact fluorescent lamp: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-09008 (1 Triple 70W) 90˚

Cone of Light*

75˚ 700

FRR-09008

Dist. 6 8 10 12 14 16

60˚

1400

45˚

2100 0˚

15˚

FC 56.6 31.8 20.4 14.1 10.4 8.0

Dia. 8.4 11.2 14.0 16.8 19.7 22.5

0° SC 1.4 45° SC 1.4 90° SC 1.4 LER=43.2 AEC=$5.56

30˚

EFFICIENCY: 70.0% ITL TEST #54851

FRR-09008-43 (1 Triple 57W) 90˚ 75˚ 650

Ceiling Cut-out 9" Dia.

1300 1950 0˚

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 52.5 29.5 18.9 13.1 9.6 7.4

Dia. 8.1 10.9 13.6 16.3 19.0 21.7

0° SC 1.4 15˚ 30˚ 90° SC 1.4 EFFICIENCY: 74.4% 180° SC 1.2 ITL TEST #54942 LER=44.0 AEC=$5.45

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F)

or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims -31 White acrylic enameled reflector flange. -32 White oversize trim ring. Specify O.D. -33 Decorative Glow Ring suspended trim assembly. See page 5. -45 Gasket between ceiling and reflector flange. -70 SofTex Clear reflector. (CP x .89) -71 SofTex Dune reflector. (CP x .85) -79 Extension collar for ceilings up to 2” thick.

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

ShatterGuard™ Shield (Beneath Lamp) -15 Prismatic C#73 tempered glass lens. -SG .125" clear polycarbonate.

Other -99 Special modification. Consult factory. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

2 Triple

42 WATT MAXIMUM

2 Triple

42 WATT MAXIMUM

FRR-07009 FRR-09010

Excellent Cut-Off with 2 x 42 Watt in Shallow Housing Features Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes.

Aluminum Housing: Shallow Depth • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

SofTex Champagne Gold Option -90

SofTex Wheat Option -91

FRR-07009 (2 Triple 32W)

FRR-07009 (2 Triple 42W)

FRR-07009

90˚ 75˚

Ceiling Cut-out 8" Dia.

750

60˚

1500 2250 0˚

45˚ 15˚

90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 56.9 32.0 20.5 14.2 10.5 8.0

Dia. 7.9 10.6 13.2 15.9 18.5 21.1

0° SC 1.3 45° SC 1.3 90° SC 1.3 EFFICIENCY: 53.3% ITL TEST #54839 LER=37.2 AEC=$6.45

30˚

75˚ 600

60˚

1200

45˚

1800 0˚

90˚ 75˚ 850

Ceiling Cut-out 9" Dia.

60˚

1700 2550 0˚

45˚ 15˚

30˚

EFFICIENCY: 61.1% ITL TEST #44505

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

15˚

ITL TEST #54840

FC 58.1 32.7 20.9 14.5 10.7 8.2

Dia. 8.2 11.0 13.7 16.5 19.2 21.9

0° SC 1.4 45° SC 1.5 90° SC 1.5 LER=40.8 AEC=$5.89

Cone of Light* Dist. 6 8 10 12 14 16

FC 42.4 23.9 15.3 10.6 7.8 6.0

Dia. 8.2 10.9 13.7 16.4 19.1 21.9

0° SC 1.3 45° SC 1.4 90° SC 1.4 LER=35.4 AEC=$6.79

FRR-09010 (2 Triple 32W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

30˚

EFFICIENCY: 55.5%

FRR-09010 (2 Triple 42W)

FRR-09010

75˚ 750

60˚

1500

45˚

2250 0˚

15˚

30˚

EFFICIENCY: 66.2% ITL TEST #42853

Cone of Light* Dist. 6 8 10 12 14 16

FC 47.2 26.6 17.0 11.8 8.7 6.6

Dia. 8.2 11.0 13.7 16.4 19.2 21.9

0° SC 1.3 90° SC 1.5 180° SC 1.3 LER=39.2 AEC=$6.13

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-94 Custom color/finish. Specify. Consult factory. -OG OptiGroove black seamless tapered aluminum reflector with white flange for FRR-07009 only. (CP x .80)

Trims

ShatterGuard™ Shield (Beneath Lamp)

-31 White acrylic enameled reflector flange. -32 White oversize trim ring. Specify O.D. -33 Decorative Glow Ring suspended trim assembly. See page 5. -45 Gasket between ceiling and reflector flange. -70 SofTex Clear reflector. (CP x .89) -71 SofTex Dune reflector. (CP x .85) -79 Extension collar for ceilings up to 2” thick. -82 Sloped ceiling adapter. Specify slope in 5º increments up to 30º. -90 SofTex Champagne Gold reflector. (CP x .88) -91 SofTex Wheat reflector. (CP x .83)

-15 Prismatic C#73 tempered glass lens for FRR-09010. -SG .125” clear polycarbonate for FRR-09010.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

SofTex Dune Option -71

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

Glow Ring Option -33

Other -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRR-10011 FRR-10012

10"

2 Triple

57 WATT MAXIMUM

10"

3 Triple

42 WATT MAXIMUM

Since 1895

2 and 3 Lamp High Lumen Package With Optional Dimming or Switching Features

SofTex Dune Option -71

SofTex Champagne Gold Option -90

SofTex Wheat Option -91

Lamp • Designed for 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FRR-10011: two 57 watt triple/four tube. FRR-10012: three 42/32/26 watt triple or 26W quad. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • FRR-10011: ClickQuick connectors for easy service. • FRR-10012: Multi-wattage. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FRR-10011

FRR-10011 (2 Triple 57W) 90˚

Ceiling Cut-out 10¼" Dia.

75˚ 800

60˚

1600 2400 0˚

45˚ 15˚

30˚

EFFICIENCY: 54.3% ITL TEST #55299

FRR-10012

75˚ 850

60˚

1700

Ceiling Cut-out 10¼" Dia.

2550 0˚

45˚ 15˚

30˚

EFFICIENCY: 50.0% ITL TEST #55660

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-10011: for 4-pin 2x42/32/26W triple or 2x26W quad (multiwattage/voltage); FRR-10012: for 4-pin 3x18W triple or 3x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Cone of Light* Dist. 6 8 10 12 14 16

FC 61.2 34.4 22.0 15.3 11.2 8.6

Dia. 8.5 11.4 14.2 17.0 19.9 22.7

0° SC 1.4 45° SC 1.5 90° SC 1.5 LER=34.3 AEC=$7.01

FRR-10012 (3 Quad 26W)

FRR-10012 (3 Triple 42W) 90˚

• See Options for other finishes. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Dist. 6 8 10 12 14 16

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -74 Internal 2-lamp EM ballast. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims White acrylic enameled reflector flange. White oversize trim ring. Specify O.D. Gasket between ceiling and reflector flange. SofTex Clear reflector. (CP x .89)

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

FC 61.9 34.8 22.3 15.5 11.4 8.7

Dia. 8.6 11.5 14.3 17.2 20.0 22.9

0° SC 1.2 90° SC 1.5 180° SC 1.3 LER=36.8 AEC=$6.53

Emergency Ballast - Specify Voltage1

-31 -32 -45 -70

90˚

Cone of Light*

75˚ 500

60˚

1000 1500 0˚

45˚ 15˚

30˚

EFFICIENCY: 46.8% ITL TEST #40094

Cone of Light* Dist. 6 8 10 12 14 16

FC 38.6 21.7 13.9 9.7 7.1 5.4

Dia. 8.1 10.8 13.5 16.1 18.8 21.5

0° SC 1.3 90° SC 1.5 180° SC 1.4 LER=26.6 AEC=$9.01

-71 SofTex Dune reflector. (CP x .85) -79 Extension collar for ceilings up to 2” thick. -82 Sloped ceiling adapter. Specify slope in 5º increments up to 30º. -90 SofTex Champagne Gold reflector. (CP x .88) -91 SofTex Wheat reflector. (CP x .83) -94 Custom color/finish. Specify. Consult factory.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

32 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

Type IC - FRR-06013 Type IC - FRR-06014

Type IC Dual Reflector with Multiple Trims Features Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FRR-06013: 32/26W triple. FRR-06014: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) Alzak aluminum, one piece, self-flanged. • See Options for other finishes.

Aluminum Housing: Shallow Plenum • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC. Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Black OptiGroove Option -OG

FRR-06013 (1 Triple 32W)

FRR-06013: Type IC

90˚

Ceiling Cut-out 6½" Dia.

75˚ 300

60˚

600

45˚

900 0˚

15˚

30˚

EFFICIENCY: 72.6% ITL TEST #45412

Cone of Light* Dist. 6 8 10 12 14 16

FC 17.5 9.8 6.3 4.4 3.2 2.5

Dia. 9.3 12.3 15.4 18.5 21.6 24.7

0° SC 1.5 90° SC 1.6 180° SC 1.7 LER=42.4 AEC=$5.66

FRR-06014 (1 Triple 42W)

FRR-06014: Type IC

90˚ 75˚ 350

Ceiling Cut-out 6½" Dia.

700 1050 0˚

60˚ 45˚

Options† Ballast, Wattage and Voltage -39 Installed dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

FRR-06014 (1 Triple 32W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 27.3 15.4 9.8 6.8 5.0 3.8

Dia. 7.3 9.7 12.2 14.6 17.0 19.5

0° SC 1.2 15˚ 30˚ 90° SC 1.2 EFFICIENCY: 45.1% 180° SC 1.2 ITL TEST #48485 LER=30.7 AEC=$7.82

75˚ 300

60˚

600

45˚

900 0˚

15˚

30˚

EFFICIENCY: 49.2% ITL TEST #54828

Cone of Light* Dist. 6 8 10 12 14 16

FC 23.9 13.5 8.6 6.0 4.4 3.4

Dia. 7.0 9.3 11.6 14.0 16.3 18.6

0° SC 1.1 90° SC 1.2 180° SC 1.2 LER=31.4 AEC=$7.63

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-91 SofTex Wheat lower cone. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -OG OptiGroove black seamless tapered aluminum cone with white flange. (CP x .70)

Trims

ShatterGuard™ Shield (Beneath Lamp)

-30 -31 -32 -45 -57 -70 -71 -77 -79 -82

-17 .187” prismatic high strength acrylic for FRR-06014. -SG .125” clear polycarbonate for FRR-06014.

All white lower cone. (CP x .95) White acrylic enameled lower cone flange. White oversize trim ring. Specify O.D. Gasket between ceiling and cone flange. SofTex Titanium lower cone. (CP x .80) SofTex Clear lower cone. (CP x .92) SofTex Dune lower cone. (CP x .88) SofTex Pewter lower cone. (CP x .85) Extension collar for ceilings up to 2” thick. Sloped ceiling adapter. Specify slope in 5º increments up to 30º. -90 SofTex Champagne Gold lower cone. (CP x .91)

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

SofTex Titanium Option -57

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

All White Option -30

Other -99 Special modification. Consult factory. -AT Air tight with Type IC for FRR-06014. Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRR-07015 - Type IC

1 Triple

Since 1895

42 WATT MAXIMUM

Type IC with Exceptional Photometry in Popular Dual Reflector Design Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Black OptiGroove Option -OG

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC. Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) Alzak aluminum, one piece, self-flanged. • See Options for other finishes.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-07015: Type IC

FRR-07015 (1 Triple 42W) 90˚ 75˚ 500

60˚

1000 1500 0˚

45˚ 15˚

30˚

EFFICIENCY: 62.6% ITL TEST #45250

Cone of Light* Dist. 6 8 10 12 14 16

FC 40.3 22.7 14.5 10.1 7.4 5.7

Dia. 6.8 9.1 11.3 13.6 15.8 18.1

0° SC 1.2 45° SC 1.2 90° SC 1.2 LER=36.8 AEC=$6.52

Ceiling Cut-out 8" Dia.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims -30 -31 -32 -45 -57 -70 -71 -77 -79 -82

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

-90 SofTex Champagne Gold lower cone. (CP x .91) -91 SofTex Wheat lower cone. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -OG OptiGroove black seamless tapered aluminum cone with white flange. (CP x .70)

ShatterGuard™ Shield (Beneath Lamp) -17 .187" prismatic high strength acrylic. -SG .125" clear polycarbonate.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

57 WATT MAXIMUM

1 Triple

70 WATT MAXIMUM

FRR-07016 FRR-09017

High Wattage Dual Reflector Downlights See Options for Air Tight with Type IC Features

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple/four tube amalgam compact fluorescent lamp: FRR-07016: 57W triple/four tube. FRR-09017: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) Alzak aluminum, one piece, self-flanged. • See Options for other finishes.

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Black OptiGroove Option -OG

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-07016 (1 Triple 57W)

FRR-07016

90˚ 75˚ 500

Ceiling Cut-out 8" Dia.

60˚

1000

45˚

1500 0˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 39.8 22.4 14.3 9.9 7.3 5.6

Dia. 8.3 11.1 13.8 16.6 19.3 22.1

0° SC 1.4 15˚ 30˚ 90° SC 1.4 EFFICIENCY: 60.6% 180° SC 1.2 ITL TEST #54941 LER=36.5 AEC=$6.58

FRR-09017

FRR-09017 (1 Triple 70W) 90˚ 75˚ 850

60˚

1700

Ceiling Cut-out 9" Dia.

2550 0˚

45˚ 15˚

30˚

EFFICIENCY: 46.5% ITL TEST #55116

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use only. 10°C (50°F) minimum start. Please specify wattage and voltage; consult factory to request brand. -43 Lower wattage. FRR-07016: see FRR-07015 Type IC; FRR-09017: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. Also see Option -AT. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

FC 65.8 37.0 23.7 16.5 12.1 9.3

Dia. 5.9 7.9 9.8 11.8 13.7 15.7

0° SC 0.9 90° SC 1.0 180° SC 0.9 LER=28.8 AEC=$8.34

Trims All white lower cone. (CP x .95) White acrylic enameled lower cone flange. White oversize trim ring. Specify O.D. Gasket between ceiling and cone flange. SofTex Titanium lower cone. (CP x .80) SofTex Clear lower cone. (CP x .92) SofTex Dune lower cone. (CP x .88) SofTex Pewter lower cone. (CP x .85) Extension collar for ceilings up to 2” thick.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Dist. 6 8 10 12 14 16

-73 Internal 1-lamp EM ballast for FRR-09017. -75 Remote 1-lamp EM ballast for FRR-07016. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-09017. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-07016. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRR-09017. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRR-07016. 13-42W only. -30 -31 -32 -45 -57 -70 -71 -77 -79

FRR-09017-43 (1 Triple 57W) 90˚

Cone of Light*

75˚ 750

60˚

1500

45˚

2250 0˚

15˚

30˚

EFFICIENCY: 45.6% ITL TEST #55117

Cone of Light* Dist. 6 8 10 12 14 16

FC 56.2 31.6 20.2 14.0 10.3 7.9

Dia. 5.5 7.4 9.2 11.1 12.9 14.8

0° SC 0.9 90° SC 0.9 180° SC 0.8 LER=28.3 AEC=$8.47

-82 Sloped ceiling adapter. Specify slope in 5º increments up to 30º. -90 SofTex Champagne Gold lower cone. (CP x .91) -91 SofTex Wheat lower cone. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -OG OptiGroove black seamless tapered aluminum cone with white flange. (CP x .70)

Top Access -TA Top access for servicing from above. (FRR-09017 only)

Other -99 Special modification. Consult factory. -AT Air tight with Type IC for FRR-09017-43 (42W). Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. (Use with -43) -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRR-07018 FRR-10019

2 Triple

42 WATT MAXIMUM

10"

2 Triple

57 WATT MAXIMUM

Since 1895

2 Lamp Dual Reflector with Excellent Visual Comfort Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Black OptiGroove Option -OG

Lamp • Designed for two 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FRR-07018: 42/32/26W triple or 26W quad. FRR-10019: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRR-07018: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) Alzak aluminum, one piece, self-flanged.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-07018 (2 Triple 32W)

FRR-07018 (2 Triple 42W) FRR-07018

90˚ 75˚

Ceiling Cut-out 8" Dia.

600

60˚

1200 1800 0˚

45˚

Dist. 6 8 10 12 14 16

FC 46.1 25.9 16.6 11.5 8.5 6.5

Dia. 8.0 10.6 13.3 15.9 18.6 21.2

0° SC 1.2 45° SC 1.4 EFFICIENCY: 44.3% 90° SC 1.4 ITL TEST #50897 LER=30.4 AEC=$7.90

15˚

30˚

90˚ 75˚ 1000

60˚

2000

Ceiling Cut-out 10¼" Dia.

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-07018: for 4-pin 2x18W triple, 2x18-13W quad; FRR-10019: for 4-pin 2x42/32/26W triple, 2x26W quad (multi-wattage/voltage). Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

75˚ 550

3000 0˚

45˚

Dist. 6 8 10 12 14 16

FC 71.3 40.1 25.7 17.8 13.1 10.0

1650 0˚

15˚

-71 -77 -79 -82 -90 -91 -94 -OG

30˚

EFFICIENCY: 49.9% ITL TEST #54843

Cone of Light* Dist. 6 8 10 12 14 16

FC 39.6 22.3 14.3 9.9 7.3 5.6

Dia. 8.0 10.6 13.3 15.9 18.6 21.2

0° SC 1.3 45° SC 1.4 90° SC 1.4 LER=31.4 AEC=$7.64

FRR-10019-43 (2 Triple 42W)

Dia. 7.8 10.4 13.0 15.6 18.2 20.8

30˚

-74 Internal 2-lamp EM ballast for FRR-07018. Consult factory. -75 Remote 1-lamp EM ballast for FRR-10019. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-07018. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-10019. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRR-07018. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRR-10019. 13-42W only.

ShatterGuard™ Shield

45˚

90˚

Cone of Light*

0° SC 1.3 45° SC 1.3 EFFICIENCY: 44.9% 90° SC 1.3 ITL TEST #54939 LER=27.4 AEC=$8.45

15˚

60˚

1100

FRR-10019 (2 Triple 57W)

FRR-10019

90˚

Cone of Light*

75˚ 900

60˚

1800

45˚

2700 0˚

15˚

30˚

EFFICIENCY: 56.0% ITL TEST #55298

Cone of Light* Dist. 6 8 10 12 14 16

FC 52.6 29.6 18.9 13.1 9.7 7.4

Dia. 8.8 11.7 14.7 17.6 20.5 23.5

0° SC 1.3 90° SC 1.5 180° SC 1.3 LER=40.0 AEC=$6.00

SofTex Dune lower cone. (CP x .88) SofTex Pewter lower cone. (CP x .85) Extension collar for ceilings up to 2” thick. Sloped ceiling adapter. Specify slope in 5º increments up to 30º. SofTex Champagne Gold lower cone. (CPx.91) SofTex Wheat lower cone. (CP x .87) Custom color/finish. Specify. Consult factory. OptiGroove black seamless tapered aluminum cone with white flange for FRR-07018. (CPx.70)

Top Access

(Beneath Lamp)

-TA Top access for servicing from above. (FRR-10019 only) -15 Prismatic C#73 tempered glass for FRR-07018. -SG .125” clear polycarbonate for FRR-07018. Other Trims -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. -30 All white lower cone. (CP x .95) Use with Option -84. -31 White acrylic enameled lower cone flange. -FS Additional in-line fuse. -32 White oversize trim ring. Specify O.D. -LE With 4-pin electronic lamp. 3500°K standard. -45 Gasket between ceiling and cone flange. 82 CRI and 12,000 hour life. Specify wattage, -57 SofTex Titanium lower cone. (CP x .80) style and color temperature. -70 SofTex Clear lower cone. (CP x .92)

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

11"

2 Triple

70 WATT MAXIMUM

11"

3 Triple

57 WATT MAXIMUM

FRR-11020 FRR-11021

2 and 3 Lamp High Lumen Package in Dual Reflector Downlights Features

Lamp • Designed for 4-pin triple/four tube amalgam compact fluorescent lamps: FRR-11020: two 70W triple/four tube. FRR-11021: three 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • FRR-11020: ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) Alzak aluminum, one piece, self-flanged.

FRR-11020 Ceiling Cut-out 12¼" Dia.

75˚ 1300

60˚

2600

45˚

3900 0˚

FRR-11021

15˚

Dist. 6 8 10 12 14 16

FC 98.3 55.3 35.4 24.6 18.1 13.8

Dia. 7.6 10.2 12.7 15.3 17.8 20.4

30˚

FRR-11021 (3 Triple 57W - G.E.) 90˚ 75˚ 1400

60˚

2800

Ceiling Cut-out 12¼" Dia.

45˚

4200 0˚

15˚

30˚

EFFICIENCY: 47.6% ITL TEST #54945

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: FRR-11020: for 4-pin 2x57 triple/four tube or 2x42/32/26W triple or 2x26W quad (multi-wattage/ voltage). Specify wattage. FRR-11021: for 4-pin 3x42/32/26W triple or 3x26W quad (multi-wattage/voltage). -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

SofTex Wheat Option -91

FRR-11020-43 (2 Triple 57W) 90˚ 75˚ 1100

60˚

2200

45˚

3300 0˚

15˚

ITL TEST #55300

Dia. 7.5 10.0 12.5 15.0 17.5 20.0

0° SC 1.2 90° SC 1.3 180° SC 1.3 LER=30.7 AEC=$7.82

FC 64.5 36.3 23.2 16.1 11.8 9.1

Dia. 8.9 11.9 14.9 17.9 20.9 23.8

0° SC 1.4 45° SC 1.5 90° SC 1.5 LER=34.4 AEC=$6.98

FRR-11021 (3 Triple 57W - PHILIPS) 90˚

Cone of Light* Dist. FC 6 111.3 8 62.6 10 40.1 12 27.8 14 20.4 16 15.6

30˚

EFFICIENCY: 56.5%

Cone of Light* Dist. 6 8 10 12 14 16

75˚ 1400

60˚

2800

45˚

4200 0˚

15˚

30˚

EFFICIENCY: 46.4% ITL TEST #54873

Cone of Light* Dist. FC 6 104.6 8 58.8 10 37.6 12 26.1 14 19.2 16 14.7

Dia. 7.7 10.2 12.8 15.4 17.9 20.5

0° SC 1.1 90° SC 1.3 180° SC 1.3 LER=32.5 AEC=$7.38

0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -74 Internal 2-lamp EM ballast. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-90 SofTex Champagne Gold lower cone. (CP x .91) -91 SofTex Wheat lower cone. (CP x .87) -94 Custom color/finish. Specify. Consult factory.

Trims

-99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

-30 -31 -32 -45 -57 -70 -71 -77 -79

All white lower cone. (CP x .95) White acrylic enameled lower cone flange. White oversize trim ring. Specify O.D. Gasket between ceiling and reflector flange. SofTex Titanium lower cone. (CP x .80) SofTex Clear lower cone. (CP x .92) SofTex Dune lower cone. (CP x .88) SofTex Pewter lower cone. (CP x .85) Extension collar for ceilings up to 2” thick.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

SofTex Pewter Option -77

Cone of Light*

0° SC 1.2 45° SC 1.3 EFFICIENCY: 50.7% 90° SC 1.3 ITL TEST #54872 LER=31.9 AEC=$7.53

SofTex Dune Option -71

FRR-11020 (2 Triple 70W) 90˚

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from

SofTex Titanium Option -57

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

Emergency Ballast - Specify Voltage1

All White Option -30

Top Access -TA Top access for servicing from above.

Other

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRR-07022 - Type IC FRR-07023

1 Triple

42 WATT MAXIMUM

1 Triple

70 WATT MAXIMUM

Since 1895

X-CELL™ Parabolic Louver with Type IC in Shallow Housing Features

All White Option -30

White Flange Option -31

Wall Wash Option -WW

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC. FRR-07022 approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FRR-07022: 42/32/26W triple or 26W quad. FRR-07023: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRR-07022: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) semi-specular Alzak® aluminum cone and 4 cell parabolic cross baffle, self-flanged. • See Options for other finishes.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-07022 (1 Triple 42W) FRR-07022: Type IC

90˚ 75˚

Ceiling Cut-out 8" Dia.

450 900

60˚ 45˚

1350 0˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 38.2 21.5 13.8 9.5 7.0 5.4

Dia. 5.7 7.7 9.6 11.5 13.4 15.3

0° SC 0.9 15˚ 30˚ 90° SC 1.0 180° SC 0.9 EFFICIENCY: 41.6% ITL TEST #51514 LER=29.6 AEC=$8.11

90˚ 75˚ 650 1300

Ceiling Cut-out 8" Dia.

1950 0˚

60˚ 45˚

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-07022: for 4-pin 2x18W triple or 2x18-13W quad; FRR-07023: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multiwattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or

Dist. 6 8 10 12 14 16

with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FRR-07022. -75 Remote 1-lamp EM ballast for FRR-07023. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-07022. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-07023. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRR-07022. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRR-07023. 13-42W only.

Trims -30 -31 -32 -45

All white cross baffle and flange. (CP x .95) White flange (only) on cross baffle. White oversize trim ring. Specify O.D. Gasket between ceiling and baffle flange.

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

90˚

Cone of Light* FC 50.9 28.6 18.3 12.7 9.4 7.2

Dia. 6.9 9.2 11.5 13.8 16.1 18.4

0° SC 1.1 15˚ 30˚ 90° SC 1.2 180° SC 1.1 EFFICIENCY: 43.4% ITL TEST #54845 LER=27.0 AEC=$8.87

FRR-07023-43 (1 Triple 57W)

FRR-07023 (1 Triple 70W)

FRR-07023

75˚ 600

60˚

1200

45˚

1800 0˚

15˚

30˚

EFFICIENCY: 43.4% ITL TEST #55410

Cone of Light* Dist. 6 8 10 12 14 16

FC 46.1 26.0 16.6 11.5 8.5 6.5

Dia. 6.5 8.7 10.9 13.1 15.3 17.4

0° SC 1.1 90° SC 1.2 180° SC 1.0 LER=27.1 AEC=$8.86

-70 SofTex Clear cross baffle. (CP x .92) -79 Extension collar for ceilings up to 2” thick. -82 Sloped ceiling adapter. Specify slope in 5° increments up to 30°. -94 Custom color/finish. Specify. Consult factory. -WW Wall wash cross baffle.

ShatterGuard™ Shield (Beneath Lamp) -15 Prismatic C#73 tempered glass lens. -SG .125" clear polycarbonate for FRR-07022.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

2 Triple

FRR-07024

42 WATT MAXIMUM

X-CELL™ with 2 x 42 in Shallow Housing Features Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) semi-specular Alzak® aluminum cone and 4 cell parabolic cross baffle, self-flanged. • See Options for other finishes.

All White Option -30

SofTex Clear Option -70

Wall Wash Option -WW

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-07024 (2 Triple 42W) 90˚ 75˚ 800

60˚

1600

FRR-07024

45˚

2400 0˚

15˚

30˚

EFFICIENCY: 40.5% ITL TEST #54946

Cone of Light* Dist. 6 8 10 12 14 16

FC 61.2 34.4 22.0 15.3 11.2 8.6

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

0° SC 1.1 45° SC 1.1 90° SC 1.1 LER=26.5 AEC=$9.06

FRR-07024 (2 Triple 32W) 90˚ 75˚ 600

Ceiling Cut-out 8" Dia.

60˚

1200

45˚

1800 0˚

15˚

30˚

EFFICIENCY: 41.7% ITL TEST #54947

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-73 Internal 1-lamp EM ballast. Specify voltage. -74 Internal 2-lamp EM ballast. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims -30 -31 -32 -45 -70 -79 -82

All white cross baffle and flange. (CP x .95) White flange (only) on cross baffle. White oversize trim ring. Specify O.D. Gasket between ceiling and baffle flange. SofTex Clear cross baffle. (CP x .92) Extension collar for ceilings up to 2” thick. Sloped ceiling adapter. Specify slope in 5° increments up to 30°. -94 Custom color/finish. Specify. Consult factory. -WW Wall wash cross baffle.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Cone of Light* Dist. 6 8 10 12 14 16

FC 45.9 25.8 16.5 11.5 8.4 6.4

Dia. 6.8 9.1 11.4 13.6 15.9 18.2

0° SC 1.1 45° SC 1.1 90° SC 1.1 LER=24.5 AEC=$9.79

ShatterGuard™ Shield (Beneath Lamp) -15 Prismatic C#73 tempered glass lens. -SG .125" clear polycarbonate.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRR-07025 FRR-07026

1 Triple

57 WATT MAXIMUM

2 Triple

42 WATT MAXIMUM

Since 1895

Open Wall Wash in Shallow Housings • Outer: Etched and anodized 100% aluminum for uniform wall washing. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Double Wall Wash Option -DW

Lamp • Designed for 4-pin triple tube amalgam or quad compact fluorescent lamp(s): FRR-07025: one 57W triple/four tube. FRR-07026: two 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • Adjust 360°. • Inner: Low iridescence (L.I.) Alzak® aluminum one piece, self-flanged.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

90˚

SINGLE FIXTURE 1' 2' 3'

FRR-07025

FRR-07025 (1 Triple 57W) Ceiling Cut-out 8¾" Dia.

60˚

1100 1650 0˚

45˚ 15˚

30˚

WALL >

0° 90° 180° EFFICIENCY: 61.8%

DISTANCE FROM CEILING IN FEET

75˚ 550

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

17.4 22.2 21.4 19.8 16.2 12.5 9.9 8.1 6.4

14.5 19.7 19.9 19.1 15.6 12.4 9.7 8.3 6.6

9.1 13.3 14.4 14.8 13.2 11.1 8.9 7.7 6.4

4.6 7.4 8.7 9.8 9.5 8.8 7.6 6.6 5.9

2.4 3.9 4.9 5.8 6.3 6.6 6.1 5.5 5.1

27.5 38.6 40.3 40.8 38.2 33.9 30.2 27.4 25.5

26.2 38.0 40.3 41.2 38.4 34.4 31.0 27.8 24.2

ITL TEST #54938

90˚

FRR-07026

SINGLE FIXTURE 1' 2' 3'

700

60˚

1400

FRR-07026 (2 Triple 42W) Ceiling Cut-out 8¾" Dia.

2100 0˚

45˚ 15˚

30˚

WALL >

0° 90° 180° EFFICIENCY: 49.2%

DISTANCE FROM CEILING IN FEET

75˚

Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-07025: for 4-pin 42/32/26W triple or 26W quad (multiwattage/voltage); FRR-07026: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. (FRR-07026 only) -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FRR-07026. -74 Internal 2-lamp EM ballast. Consult factory. -75 Remote 1-lamp EM ballast for FRR-07025. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-07026. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-07025. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRR-07026. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRR-07025. 13-42W only.

Trims -30 -31 -32 -45 -57

White inner trim. (CP x .95) White acrylic enameled inner trim flange. White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange. SofTex Titanium inner trim. (CP x .80)

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

22.2 30.1 31.9 31.8 29.7 26.9 24.2 22.4 19.8

19.1 27.3 30.4 31.1 29.6 26.9 24.4 22.1 18.8

22.2 30.1 31.9 31.8 29.7 26.9 24.2 22.4 19.8

LER=38.1 AEC=$6.29

MULTIPLE FIXTURES 3' CENTERS 4' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

16.4 20.1 25.2 24.0 18.3 13.6 10.3 8.1 6.7

13.4 16.2 21.3 21.4 17.1 13.0 10.0 7.9 6.6

8.2 9.9 12.7 14.9 13.8 11.3 9.0 7.3 6.2

5.0 5.9 6.7 8.7 9.5 8.9 7.6 6.5 5.7

3.3 3.7 3.9 4.8 5.8 6.2 6.0 5.5 5.0

31.1 36.9 43.8 46.9 43.3 38.2 33.0 28.9 26.1

29.7 35.0 43.7 47.5 43.7 38.1 33.2 29.2 26.3

ITL TEST #47220

Options†

27.5 38.6 40.3 40.8 38.2 33.9 30.2 27.4 25.5

31.1 36.9 43.8 46.9 43.3 38.2 33.0 28.9 26.1

25.9 30.8 36.4 37.1 33.4 29.7 26.3 23.2 21.0

21.9 25.5 31.4 36.1 34.5 30.0 26.2 23.0 21.2

25.9 30.8 36.4 37.1 33.4 29.7 26.3 23.2 21.0

LER=32.4 AEC=$7.40

-70 -71 -77 -79 -90

SofTex Clear inner trim. (CP x .92) SofTex Dune inner trim. (CP x .88) SofTex Pewter inner trim. (CP x .85) Extension collar for ceilings up to 2” thick. SofTex Champagne Gold inner trim. (CP x .91) -91 SofTex Wheat inner trim. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -DW Double wall wash. Two cut-outs at 180°.

Other -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. (FRR-07026 only) -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

42 WATT MAXIMUM

1 Triple

57 WATT MAXIMUM

Type IC - FRR-06027 FRR-07028

Lensed Wall Washes Features Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FRR-06027: 42/32/26W triple or 26W quad. FRR-07028: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRR-06027: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Trim Assembly • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) Alzak one piece, self-flanged. • Tempered prismatic C#73 spread lens.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC (non-dimming). FRR-06027 approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

90˚

FRR-06027: Type IC

SINGLE FIXTURE 1' 2' 3'

MULTIPLE FIXTURES 3' CENTERS 4' CENTERS

FRR-06027 (1 Triple 42W) Ceiling Cut-out 6½" Dia.

250

60˚

500 750 0˚

45˚ 15˚

30˚

WALL >

0° 90° 180° EFFICIENCY: 38.0%

DISTANCE FROM CEILING IN FEET

75˚ FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

8.1 6.1 3.5 17.0 14.0 8.5 17.2 14.9 10.2 13.7 12.3 9.2 9.9 9.0 7.2 7.0 6.7 5.6 5.1 4.9 4.2 3.9 3.9 3.5 3.0 3.0 2.8

1.5 4.3 6.0 6.1 5.1 4.3 3.5 2.8 2.4

0.7 2.0 3.3 3.8 3.5 3.2 2.7 2.3 2.1

12.1 26.9 31.5 28.9 24.2 19.6 16.1 13.5 11.9

11.3 26.3 31.4 29.1 24.4 19.9 16.4 13.8 11.4

ITL TEST #55301

90˚

FRR-07028

SINGLE FIXTURE 1' 2' 3'

12.1 26.9 31.5 28.9 24.2 19.6 16.1 16.5 11.9

10.9 20.8 24.7 22.5 18.9 15.6 13.0 11.1 9.5

8.9 18.3 23.2 21.8 18.6 15.6 13.0 11.1 9.0

10.9 20.8 24.7 22.5 18.9 15.6 13.0 11.1 9.5

LER=27.5 AEC=$8.73

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

300

60˚

600

FRR-07028 (1 Triple 57W) Ceiling Cut-out 8" Dia.

900 0˚

45˚ 15˚

30˚

WALL >

0° 90° 180° EFFICIENCY: 34.8%

DISTANCE FROM CEILING IN FEET

75˚ FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

13.7 24.2 22.4 17.0 12.1 8.6 6.3 4.8 3.7

10.6 6.1 20.3 12.8 19.8 13.9 15.4 11.8 11.0 8.9 8.1 6.8 5.9 5.1 4.7 4.2 3.6 3.4

2.7 6.7 8.5 8.0 6.5 5.3 4.2 3.4 2.9

1.3 3.3 4.7 5.0 4.5 4.0 3.3 2.8 2.5

20.3 39.8 42.8 37.4 30.4 24.1 19.6 16.3 14.2

19.2 39.3 42.9 37.6 30.5 24.4 19.9 16.5 13.6

ITL TEST #55303

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-06027: for 4-pin 18W triple or 18-13W quad; FRR-07028: for 4-pin 42/32/26W triple or 26W quad (multiwattage/voltage). Specify wattage. 0° to 50°C (32° to 122°F). Specify voltage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for 1

damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FRR-06027. -75 Remote 1-lamp EM ballast for FRR-07028. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-06027. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-07028. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRR-06027. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRR-07028. 13-42W only.

Trims -30 All white lower cone. (CP x .95) -31 White flange (only) on lower cone. -32 White oversize trim ring. Specify O.D.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

20.3 39.8 42.8 37.4 30.4 24.1 19.6 16.3 14.2

17.4 30.3 33.3 29.1 23.8 19.3 15.9 13.5 11.4

14.7 27.4 31.9 28.5 23.5 19.2 15.9 13.4 10.8

17.4 30.3 33.3 29.1 23.8 19.3 15.9 13.5 11.4

LER=23.9 AEC=$10.03

-45 -57 -70 -71 -77 -90

Gasket between ceiling and cone flange. SofTex Titanium lower cone. (CP x .80) SofTex Clear lower cone. (CP x .92) SofTex Dune lower cone. (CP x .88) SofTex Pewter lower cone. (CP x .85) SofTex Champagne Gold lower cone. (CP x .91) -91 SofTex Wheat lower cone. (CP x .87) -94 Custom color/finish. Specify. Consult factory.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 23

FRR-07029 - Type IC FRR-07030

1 Triple

42 WATT MAXIMUM

1 Triple

57 WATT MAXIMUM

Since 1895

Adjustable Downlights for Sloped Ceilings Air Tight Optional Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC. FRR-07029 approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Lamp • Designed for one 4-pin triple/four tube amalgam or quad compact fluorescent lamp: FRR-07029: 42/32/26W triple or 26W quad. FRR-07030: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRR-07029: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflectors • Upper: Specular Alzak® aluminum. Tilts up to 30° for sloped ceilings. 358° swivel for FRR-07029. • Lower: Low iridescence (L.I.) Alzak aluminum, one piece, self-flanged.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-07029 (1 Triple 42W)

FRR-07029: Type IC

90˚ 75˚

Ceiling Cut-out 8" Dia.

450

60˚

900

45˚

1350 0˚

15˚

30˚

EFFICIENCY: 42.7% ITL TEST #54837

90˚ 75˚ 500

60˚

1000

Ceiling Cut-out 8" Dia.

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 49.2% ITL TEST #55113

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-07029: for 4-pin 18W triple or 18-13W quad; FRR-07030: for 4-pin 42/32/26W triple or 26W quad (multiwattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Dist. 6 8 10 12 14 16

FC 31.9 17.9 11.5 8.0 5.9 4.5

Dia. 5.9 7.8 9.8 11.7 13.7 15.6

0° SC 1.0 90° SC 1.0 180° SC 1.0 LER=32.4 AEC=$7.42

FRR-07030 (1 Triple 57W)

FRR-07030

FRR-07029 (1 Triple 42W - 30° TILT) 90˚

Cone of Light*

75˚ 450

60˚

900 1350 0˚

45˚ 15˚

FC 38.0 21.4 13.7 9.5 7.0 5.3

Dia. 7.5 10.0 12.5 15.0 17.5 20.0

0° SC 1.3 90° SC 1.2 180° SC 1.2 LER=30.7 AEC=$7.83

30˚

EFFICIENCY: 46.7% ITL TEST #55043

0° SC 1.4 90° SC 1.2 180° SC 1.7 LER=34.0 AEC=$7.07

FRR-07030 (1 Triple 57W - 30° TILT) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

Data collected with lamp tilted at 30°

75˚ 500

60˚

1000

Data collected with lamp tilted at 30°

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 47.5% ITL TEST #55114

0° SC 1.1 45° SC 1.1 90° SC 0.8 LER=29.5 AEC=$8.13

-75 Remote 1-lamp EM ballast. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-90 SofTex Champagne Gold lower cone. (CP x .91) -91 SofTex Wheat lower cone. (CP x .87) -94 Custom color/finish. Specify. Consult factory.

Trims

-TA Top access for servicing from above.

-30 -31 -32 -45 -57 -70 -71 -77 -79

All white lower cone. (CP x .95) White flange (only) on lower cone. White oversize trim ring. Specify O.D. Gasket between ceiling and cone flange. SofTex Titanium lower cone. (CP x .80) SofTex Clear lower cone. (CP x .92) SofTex Dune lower cone. (CP x .88) SofTex Pewter lower cone. (CP x .85) Extension collar for ceilings up to 2” thick for FRR-07030. -82 Sloped ceiling adapter for FRR-07030. Specify slope in 5º increments up to 30º.

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

Top Access Other -99 Special modification. Consult factory. -AT Air tight with Type IC for FRR-07029. Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

2 Triple

FRR-07031

42 WATT MAXIMUM

Adjustable 2 x 42 Downlight for Sloped Ceilings Features

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • Upper: Specular Alzak® aluminum. Tilts up to 30° for sloped ceilings. • Lower: Low iridescence (L.I.) Alzak aluminum, one piece, self-flanged.

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-07031 (2 Triple 42W - 30° TILT) 90˚ 75˚ 700

60˚

FRR-07031 1400 2100 0˚

Data collected with lamp tilted at 30°

45˚ 15˚

30˚

EFFICIENCY: 41.8% ITL TEST #54864

0° SC 1.1 90° SC 1.0 180° SC 0.8 LER=26.9 AEC=$8.91

FRR-07031 (2 Triple 32W - 30° TILT) 90˚ 75˚ 600

Ceiling Cut-out 8" Dia.

60˚

1200 1800 0˚

45˚ 15˚

30˚

EFFICIENCY: 44.0% ITL TEST #54865

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims -30 -31 -32 -45 -57 -70 -71 -77 -79 -82

All white lower cone. (CP x .95) White flange (only) on lower cone. White oversize trim ring. Specify O.D. Gasket between ceiling and cone flange. SofTex Titanium lower cone. (CP x .80) SofTex Clear lower cone. (CP x .92) SofTex Dune lower cone. (CP x .88) SofTex Pewter lower cone. (CP x .85) Extension collar for ceilings up to 2” thick. Sloped ceiling adapter. Specify slope in 5º increments up to 30º. -90 SofTex Champagne Gold lower cone. (CP x .91)

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Data collected with lamp tilted at 30°

0° SC 1.0 90° SC 1.0 180° SC 0.8 LER=25.2 AEC=$9.51

-91 SofTex Wheat lower cone. (CP x .87) -94 Custom color/finish. Specify. Consult factory.

Top Access -TA Top access service for servicing from above.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 25

FRR-05032 - Type IC

1 Triple

Since 1895

32 WATT MAXIMUM

Type IC Lensed “Dead Front” Downlight Ideal for Showers Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC (non-dimming). Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

Drop Poly Option -76

Convex Poly Option -CV

Electrically “Dead Front” Design Air Tight Optional

Lamp • Designed for one 4-pin triple tube amalgam compact fluorescent lamp: 32/26W triple. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • Electrically non-conducting “dead-front”. • Rustproof. • Double gasketed. White polycarbonate trim with radial clear polycarbonate lens.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-05032-76 (1 Triple 32W) 0

90˚

Cone of Light*

75˚ 50

FRR-05032: Type IC

FRR-05032 (1 Triple 32W) 90˚ 75˚ 100

60˚

200 300 0˚

45˚

100

FC 8.1 4.6 2.9 2.0 1.5 1.1

Dia. 7.0 9.4 11.7 14.0 16.4 18.7

0° SC 1.2 90° SC 1.3 EFFICIENCY: 34.6% 180° SC 1.3 ITL TEST #45415 LER=20.5 AEC=$11.69

15˚

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

150 0˚

Dist. 6 8 10 12 14 16

15˚

30˚

FC 3.7 2.1 1.3 0.9 0.7 0.5

Dia. 7.7 10.2 12.8 15.4 17.9 20.5

0° SC 1.4 90° SC 1.4 180° SC 1.4 LER=15.1 AEC=$15.88

EFFICIENCY: 25.4% ITL TEST #45416

FRR-05032-CV (1 Triple 32W)

30˚

75˚ 60

Ceiling Cut-out 6½" Dia.

90˚

120 180 0˚

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 4.7 2.7 1.7 1.2 0.9 0.7

Dia. 7.1 9.4 11.8 14.1 16.5 18.9

0° SC 1.2 15˚ 30˚ 90° SC 1.3 EFFICIENCY: 21.3% 180° SC 1.3 ITL TEST #45418 LER=12.7 AEC=$18.88

Emergency Ballast - Specify Voltage

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from

0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses and Trims -32 White oversize trim ring. Specify O.D. -76 Drop white polycarbonate diffuser in white polycarbonate trim. -79 Extension collar for ceilings up to 2” thick.

Visit www.kirlinlighting.com for most current performance / specifications.

*Photometric Definitions and Keys begin on page 83.

-94 Custom color/finish. Specify. Consult factory. -CV Convex white polycarbonate diffuser in white polycarbonate trim.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

26 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

Type IC - FRR-06033 FRR-06034

Super Shallow Lensed Downlight with Type IC Features Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FRR-06033: 26W triple. FRR-06034: 42/32/26W triple or 26W quad. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRR-06034: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • White flat seamless aluminun one piece selfflanged or see Option -40. • Tempered prismatic C#73 spead distribution lens or many optional lenses.

Performance at a Glance*

Aluminum Housing: Super Shallow Depth • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC (non-dimming). FRR-06033 approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

White Grooveless Flare Option -40 (See Restrictions Below)

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets FRR-06033 (1 Triple 26W) 90˚ 75˚

FRR-06033: Type IC

190

Ceiling Cut-out 8" Dia.

60˚

380

45˚

570 0˚

15˚

30˚

EFFICIENCY: 66.8% ITL TEST #55661

Cone of Light* Dist. 6 8 10 12 14 16

FC 15.8 8.9 5.7 4.0 2.9 2.2

Dia. 7.6 10.1 12.7 15.2 17.7 20.3

0° SC 1.2 90° SC 1.3 180° SC 1.3 LER=45.7 AEC=$5.26

FRR-06034 (1 Triple 42W) 90˚

FRR-06034

75˚ 350

60˚

700

Ceiling Cut-out 8" Dia.

1050 0˚

45˚ 15˚

30˚

EFFICIENCY: 66.8% ITL TEST #52486

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast for FRR-06033. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-06033: 18W triple or 18-13W quad; FRR-06034: 2x9W twin. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

FC 28.1 15.8 10.1 7.0 5.2 4.0

Dia. 7.6 10.1 12.7 15.2 17.7 20.3

0° SC 1.2 90° SC 1.3 180° SC 1.3 LER=47.4 AEC=$5.86

-82 Sloped ceiling adapter. Specify slope in 5° increments up to 30°. -94 Custom color/finish. Specify. Consult factory. -FR Fresnel tempered glass lens. -UV UV filter. Consult factory.

Lenses and Trims

Other

-13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -17 .187” prismatic flat high strength acrylic. -18 Opal flat glass diffuser. -21 White flat polycarbonate diffuser. -32 White oversize trim ring. Specify O.D. -40 White grooveless flare trim for FRR-06033. (CP x 1.10) For 2 twin 13W (max.) electronic only. Type IC. Consult factory for lamps. -45 Gasket between ceiling and trim flange. -46 Gasket between trim and lens.

-99 Special modification. Consult factory. -AT Air tight with Type IC for FRR-06033. Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Cone of Light* Dist. 6 8 10 12 14 16

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 27

FRR-06035 - Type IC

1 Triple

Since 1895

32 WATT MAXIMUM

Type IC Lensed Downlight in Super Narrow Housing - Air Tight Optional Aluminum Housing: Only 7” Wide • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC (non-dimming). Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

Opal Diffuser Option -18

Fresnel Lens Option -FR

White Grooveless Flare Option -40

Lamp • Designed for one 4-pin triple tube amalgam compact fluorescent lamp: 32/26W triple. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-06035 : Type IC

FRR-06035 (1 Triple 32W) 90˚ 75˚ 140

60˚

280 420 0˚

Option -40 Also Shown

Ceiling Cut-out 6¾" Dia.

45˚

FRR-06035 (1 Triple 26W)

FC 12.1 6.8 4.4 3.0 2.2 1.7

Dia. 6.9 9.2 11.5 13.8 16.1 18.4

0° SC 1.2 45° SC 1.1 EFFICIENCY: 32.1% 90° SC 1.1 ITL TEST #54827 LER=23.7 AEC=$10.14

15˚

90˚

Cone of Light* Dist. 6 8 10 12 14 16

30˚

75˚ 120

60˚

240

45˚

360 0˚

15˚

30˚

EFFICIENCY: 41.9% ITL TEST #42382

Cone of Light* Dist. 6 8 10 12 14 16

FC 8.6 4.8 3.1 2.1 1.6 1.2

Dia. 8.7 11.7 14.6 17.5 20.4 23.3

0° SC 1.5 45° SC 1.5 90° SC 1.5 LER=25.9 AEC=$9.26

-HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-FT Flat white trim. -UV UV filter. Consult factory.

Lenses and Trims

Top Access

-13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” polycarbonate. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum egg-crate louver (1/2” cubes). -21 White flat polycarbonate diffuser. -32 White oversize trim ring. Specify O.D. -40 White grooveless flare trim. (CP x 1.10) -45 Gasket between ceiling and trim flange. -46 Gasket between trim and lens. -94 Custom color/finish. Consult factory. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens.

-TA Top access for servicing from above.

Visit www.kirlinlighting.com for most current performance / specifications.

*Photometric Definitions and Keys begin on page 83.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

32 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

Type IC - FRR-06036 Type IC - FRR-07037

Type IC (Air Tight Optional) Regressed Lens Shallow Plenum Downlights Features Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FRR-06036: 32/26W triple. FRR-07037: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC (non-dimming). Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Opal Diffuser Option -18

Fresnel Lens Option -FR

White Grooveless Flare Option -40

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-06036 (1 Triple 32W) FRR-06036: Type IC

90˚ 75˚ 250

Ceiling Cut-out 6½" Dia.

60˚

500 750 0˚

45˚ 15˚

30˚

EFFICIENCY: 41.9% ITL TEST #45417

Option -40 Also Shown

90˚ 75˚ 350

60˚

700

Ceiling Cut-out 8" Dia.

1050 0˚

45˚ 15˚

30˚

EFFICIENCY: 44.8% ITL TEST #55413

Option -40 Also Shown

Dia. 6.2 8.3 10.4 12.5 14.5 16.6

0° SC 1.0 90° SC 1.1 180° SC 1.2 LER=24.9 AEC=$9.63

FRR-07037-40 (1 Triple 42W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 25.5 14.4 9.2 6.4 4.7 3.6

Dia. 6.7 8.9 11.2 13.4 15.7 17.9

0° SC 1.1 90° SC 1.1 180° SC 1.2 LER=33.6 AEC=$7.14

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” polycarbonate. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum egg-crate louver (1/2” cubes). -21 White flat polycarbonate diffuser. -32 White oversize trim ring. Specify O.D. -40 White grooveless flare trim. (CP x 1.10) -45 Gasket between ceiling and trim flange. -46 Gasket between trim and lens. -79 Extension collar for ceilings up to 2” thick.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

FC 19.1 10.8 6.9 4.8 3.5 2.7

FRR-07037 (1 Triple 42W)

FRR-07037: Type IC

Cone of Light* Dist. 6 8 10 12 14 16

75˚ 350

60˚

700 1050 0˚

45˚ 15˚

30˚

EFFICIENCY: 50.7% ITL TEST #55414

Cone of Light* Dist. 6 8 10 12 14 16

FC 27.4 15.4 9.9 6.9 5.0 3.9

Dia. 6.7 8.9 11.1 13.3 15.5 17.7

0° SC 1.0 90° SC 1.1 180° SC 1.2 LER=38.0 AEC=$6.31

-82 Sloped ceiling adapter. Specify slope in 5º increments up to 30º. -94 Custom color/finish. Specify. Consult factory. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -FT Flat white trim -UV UV filter. Consult factory.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 29

FRR-08038

1 Triple

Since 1895

70 WATT MAXIMUM

High Wattage, Shallow Plenum Regressed Lens Downlight Features

Opal Diffuser Option -18

Fresnel Lens Option -FR

White Grooveless Flare Option -40

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple/four tube amalgam compact fluorescent lamp: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed prismatic C#73 spread lens.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-08038 (1 Triple 70W) 90˚ 75˚ 500

FRR-08038

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 50.3% ITL TEST #54868

Cone of Light* Dist. 6 8 10 12 14 16

FC 41.1 23.1 14.8 10.3 7.6 5.8

Dia. 6.1 8.1 10.1 12.1 14.2 16.2

0° SC 1.0 90° SC 1.0 180° SC 1.0 LER=31.1 AEC=$7.73

FRR-08038-43 (1 Triple 57W) 90˚

Option -40 Also Shown

75˚ 400

Ceiling Cut-out 9" Dia.

60˚

800

45˚

1200 0˚

15˚

30˚

EFFICIENCY: 51.4% ITL TEST #54943

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

-46 -76 -79 -82 -94 -CF -FR -FT -UV

Cone of Light* Dist. 6 8 10 12 14 16

FC 33.6 18.9 12.1 8.4 6.2 4.7

Dia. 6.3 8.4 10.5 12.6 14.6 16.7

0° SC 1.1 90° SC 1.0 180° SC 1.0 LER=30.5 AEC=$7.87

Gasket between trim and lens. Drop white polycarbonate diffuser. Extension collar for ceilings up to 2” thick. Sloped ceiling adapter. Specify slope in 5º increments up to 30º. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. Fresnel tempered glass lens. Flat white trim UV filter. Consult factory.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

2 Triple

42 WATT MAXIMUM

11"

2 Triple

57 WATT MAXIMUM

FRR-08039 FRR-11040

2-Lamp High Wattage with Regressed Lens Features Lamp • Designed for two 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FRR-08039: 42/32/26W triple or 26W quad. FRR-11040: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRR-08039: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove

with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

White Grooveless Flare Option -40

FRR-08039 (2 Triple 42W)

FRR-08039

90˚ 75˚ 700

60˚

1400

45˚

2100 0˚

Ceiling Cut-out 9" Dia.

FRR-08039 (2 Triple 32W)

Dist. 6 8 10 12 14 16

FC 55.2 31.0 19.9 13.8 10.1 7.8

Dia. 6.4 8.5 10.6 12.8 14.9 17.0

0° SC 1.1 15˚ 30˚ 45° SC 1.2 EFFICIENCY: 47.6% 90° SC 1.2 ITL TEST #44510 LER=33.2 AEC=$7.23

90˚ 75˚ 900

60˚

1800 2700 0˚

Ceiling Cut-out 12¼" Dia.

45˚

75˚ 500

60˚

1000

45˚

1500 0˚

15˚

ITL TEST #45483

90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 70.9 39.9 25.5 17.7 13.0 10.0

30˚

EFFICIENCY: 43.2%

Cone of Light* Dist. 6 8 10 12 14 16

FC 38.2 21.5 13.8 9.6 7.0 5.4

Dia. 6.3 8.4 10.6 12.7 14.8 16.9

0° SC 1.1 45° SC 1.1 90° SC 1.1 LER=27.1 AEC=$8.85

FRR-11040-43 (2 Triple 42W) Dia. 5.7 7.5 9.4 11.3 13.2 15.1

0° SC 0.9 45° SC 0.9 EFFICIENCY: 46.4% 90° SC 0.9 ITL TEST #54940 LER=31.2 AEC=$7.69

15˚

90˚

Cone of Light*

FRR-11040 (2 Triple 57W)

FRR-11040

Option -40 Also Shown

Fresnel Lens Option -FR

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

Option -40 Also Shown

Opal Diffuser Option -18

30˚

75˚ 950

60˚

1900

45˚

2850 0˚

15˚

30˚

EFFICIENCY: 49.7% ITL TEST #55047

Cone of Light* Dist. 6 8 10 12 14 16

FC 75.6 42.5 27.2 18.9 13.9 10.6

Dia. 5.2 6.9 8.6 10.4 12.1 13.8

0° SC 0.9 45° SC 0.9 90° SC 0.9 LER=33.3 AEC=$7.21

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-08039: for 4-pin 2x18W triple or 2x18-13W quad; FRR-11040: for 4-pin 2x42/32/26W triple or 2x26W quad (multi-wattage/voltage). Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” polycarbonate. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate diffuser. -32 White oversize trim ring. Specify O.D. -40 White grooveless flare trim. (CP x 1.10) -45 Gasket between ceiling and trim flange. -46 Gasket between trim and lens. -76 Drop white poly diffuser for FRR-08039.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

-79 Extension collar for ceilings up to 2” thick. -82 Sloped ceiling adapter for FRR-08039. Specify slope in 5º increments up to 30º. -94 Custom color/finish. Specify. Consult factory. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -FT Flat white trim. -UV UV filter. Consult factory.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRR-11041 FRR-11042

11"

2 Triple

70 WATT MAXIMUM

11"

3 Triple

57 WATT MAXIMUM

Since 1895

2 and 3 Lamp High Wattage Regressed Lens Downlights Features

Opal Diffuser Option -18

Fresnel Lens Option -FR

White Grooveless Flare Option -40

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FRR-11041

FRR-11041 (2 Triple 70W) 90˚

Ceiling Cut-out 12¼" Dia.

75˚ 1000

60˚

2000

45˚

3000 0˚

Option -40 Also Shown

75˚ 1000

60˚

2000

Ceiling Cut-out 12¼" Dia.

45˚

3000 0˚

15˚

30˚

EFFICIENCY: 44.3% ITL TEST #54944

Option -40 Also Shown

Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-11041: See FRR-11040; FRR-11042: for 4-pin 3x42/32/26W triple or 3x26W quad (multiwattage/voltage). -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

FC 79.2 44.5 28.5 19.8 14.5 11.1

Dia. 5.9 7.9 9.9 11.9 13.9 15.9

FRR-11042 (3 Triple 57W) 90˚

Options†

Cone of Light* Dist. 6 8 10 12 14 16

0° SC 1.0 15˚ 30˚ 45° SC 1.0 EFFICIENCY: 49.2% 90° SC 1.0 ITL TEST #54855 LER=32.4 AEC=$7.41

FRR-11042

trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FRR-11041: two 70W triple/four tube. FRR-11042: three 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • FRR-11041: ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove with white flange or all white smooth self-flanged

Dist. 6 8 10 12 14 16

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” polycarbonate. -18 Opal flat glass diffuser. -20 White aluminum egg-crate louver (1/2” cubes). -32 White oversize trim ring. Specify O.D. -40 White grooveless flare trim. (CP x 1.10) -45 Gasket between ceiling and trim flange. -46 Gasket between trim and lens. -79 Extension collar for ceilings up to 2” thick.

*Photometric Definitions and Keys begin on page 83.

FC 81.6 45.9 29.4 20.4 15.0 11.5

Dia. 6.1 8.2 10.2 12.3 14.3 16.4

0° SC 0.9 90° SC 1.0 180° SC 1.1 LER=29.7 AEC=$8.07

Visit www.kirlinlighting.com for most current performance / specifications.

FRR-11042-43 (3 Triple 42W) 90˚

Cone of Light*

-94 -CF -FR -FT

75˚ 1150 2300 3450 0˚

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 94.9 53.4 34.2 23.7 17.4 13.4

Dia. 5.9 7.8 9.8 11.8 13.7 15.7

0° SC 1.0 15˚ 30˚ 90° SC 1.0 EFFICIENCY: 50.8% 180° SC 1.0 ITL TEST #49001 LER=37.4 AEC=$6.42

Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. Fresnel tempered glass lens. Flat white trim

Top Access -TA Top access for servicing from above.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

70 WATT MAXIMUM

2 Triple

42 WATT MAXIMUM

FRR-08043 FRR-08044

Concrete Pour: Regressed Lens Downlights Features

with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens. • Fully gasketed. Housing • 16 GA. galvannealed steel; red oxide rustproof primer coat; black enamel finish. • Fully gasketed. • Entire luminaire serviced through aperture. • 2” collar promotes concrete flow. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • Recesses indoor or outdoor in poured concrete ceilings. UL, C-UL (Canada) Listings • For use in poured concrete. • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for 4-pin triple/four tube amalgam compact fluorescent lamp(s): FRR-08043: one 70W triple/four tube. FRR-08044: two 42/32/26W triple or 26W quad. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRR-08044: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove

Opal Diffuser Option -18

Fresnel Lens Option -FR

White Grooveless Flare Option -40

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRR-08043-43 (1 Triple 57W)

FRR-08043 (1 Triple 70W) FRR-08043

90˚ 75˚ 500

60˚

1000 1500 0˚

45˚ 15˚

30˚

EFFICIENCY: 50.3% ITL TEST #54868

Option -40 Also Shown

90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 41.1 23.1 14.8 10.3 7.6 5.8

Dia. 6.1 8.1 10.1 12.1 14.2 16.2

0° SC 1.0 90° SC 1.0 180° SC 1.0 LER=31.1 AEC=$7.73

75˚ 400

60˚

800

45˚

1200 0˚

90˚ 75˚ 700 1400 2100 0˚

60˚ 45˚

90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 55.2 31.0 19.9 13.8 10.1 7.8

Dia. 6.4 8.5 10.6 12.8 14.9 17.0

0° SC 1.1 15˚ 30˚ 45° SC 1.2 EFFICIENCY: 47.6% 90° SC 1.2 ITL TEST #44510 LER=33.2 AEC=$7.23

Option -40 Also Shown

30˚

FC 33.6 18.9 12.1 8.4 6.2 4.7

Dia. 6.3 8.4 10.5 12.6 14.6 16.7

0° SC 1.1 90° SC 1.0 180° SC 1.0 LER=30.5 AEC=$7.87

FRR-08044 (2 Triple 32W)

FRR-08044 (2 Triple 42W) FRR-08044

15˚

EFFICIENCY: 51.4% ITL TEST #54943

Cone of Light* Dist. 6 8 10 12 14 16

75˚ 500

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 43.2% ITL TEST #45483

Cone of Light* Dist. 6 8 10 12 14 16

FC 38.2 21.5 13.8 9.6 7.0 5.4

Dia. 6.3 8.4 10.6 12.7 14.8 16.9

0° SC 1.1 45° SC 1.1 90° SC 1.1 LER=27.1 AEC=$8.85

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRR-08043: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage); FRR-08044: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. (FRR-08044 only) -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-73 -74 -75 -CE

Internal 1-lamp EM ballast for FRR-08044. Internal 2-lamp version. Consult factory. Remote 1-lamp EM ballast. Specify voltage. Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-08044. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRR-08043. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRR-08044. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRR-08043. 13-42W only.

-32 -40 -45 -46 -76 -94 -CF -FR -FT -UV

Lenses and Trims

-99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. (FRR-08044 only) -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

-13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” polycarbonate. -17 .187” prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum egg-crate louver (1/2” cubes). -21 White flat polycarbonate diffuser. -26 Tamper-resistant OptiGroove trim and lens. One key / ten fixtures. Also available with -40.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

White oversize trim ring. Specify O.D. White flare trim. Also see -26. (CP x 1.10) Gasket between ceiling and trim flange. Gasket between trim and lens. Drop white polycarbonate diffuser. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. Fresnel tempered glass lens. Flat white trim UV filter. Consult factory.

Other

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 33

FSR-06045 FSR-06046

1 Triple

26 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

Since 1895

Open Cylinders: Slender 6” Diameter Features

SofTex Dune Option -71 Pendant Mount Option -PM SofTex Champagne Gold Option -90

SofTex Wheat Option -91

Bracket Mount Option -WB

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FSR-06045: 26W triple. FSR-06046: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FSR-06045

FSR-06045 (1 Triple 26W) 90˚ 75˚ 250

60˚

500 750 0˚

Representative Views:

45˚ 15˚

30˚

EFFICIENCY: 51.7% ITL TEST #55029

(Above) With optional pendant mount (Option -PM)

FSR-06046

(Below) With optional wall bracket (Option -WB)

75˚ 400

60˚

800 1200 0˚

45˚ 15˚

30˚

EFFICIENCY: 46.9% ITL TEST #48597

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast for FSR06046. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Cone of Light* Dist. 6 8 10 12 14 16

Dia. 7.2 9.6 12.0 14.4 16.8 19.2

0° SC 1.2 45° SC 1.2 90° SC 1.2 LER=32.3 AEC=$7.43

Dist. 6 8 10 12 14 16

Luminaire (Housing) Finishes Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7)

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

FC 26.6 15.0 9.6 6.7 4.9 3.7

Dia. 7.3 9.7 12.2 14.6 17.0 19.4

0° SC 1.3 45° SC 1.3 90° SC 1.2 LER=35.1 AEC=$6.84

-70 SofTex Clear reflector. (CP x .89) -71 SofTex Dune lower reflector. (CP x .85) -90 SofTex Champagne Gold reflector. (CP x .88) -91 SofTex Wheat reflector. (CP x .83) -94 Custom color/finish. Specify. Consult factory.

FSR-06046 (1 Triple 32W) 90˚

Cone of Light*

Trims

-35 -36 -37 -38 -94

FC 16.4 9.2 5.9 4.1 3.0 2.3

FSR-06046 (1 Triple 42W) 90˚

F 3430

Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware included. • 2" collar for surface J-box mount. (Option -80) • Pendant, cable or wall bracket mount available. (See Options -AS, -88, -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

75˚ 300

60˚

600

45˚

900 0˚

15˚

30˚

EFFICIENCY: 49.5% ITL TEST #48595

Cone of Light* Dist. 6 8 10 12 14 16

FC 21.1 11.9 7.6 5.3 3.9 3.0

Dia. 7.3 9.7 12.2 14.6 17.1 19.5

0° SC 1.3 45° SC 1.3 90° SC 1.2 LER=34.6 AEC=$6.94

-87 Custom pendant / wall bracket / cable length. Specify length. Use with -AS, -PM, or -WB. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -AS 48" aircraft cable mount with white straight cord for FSR-06046. See -87. Consult factory. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -WB Wall bracket mount. Must add Option -89 for wet label listing.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

42 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

FSR-09047 FSR-09048

Open Cylinders with Flat or Flared Trim Features Exceeds 1000 hour ASTM 5% salt spray test. • FSR-09048: Interlocking flare trim. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware included. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

SofTex Dune Option -71 Pendant Mount Option -PM SofTex Champagne Gold Option -90

SofTex Wheat Option -91

Bracket Mount Option -WB

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

90˚ 75˚ 500

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 50.9%

Representative Views:

ITL TEST #55411

FSR-09048

(Above) With optional pendant mount (Option -PM)

90˚ 75˚ 400

60˚

800 1200 0˚

45˚ 15˚

30˚

EFFICIENCY: 46.9% ITL TEST #48597

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Dia. 6.5 8.7 10.9 13.0 15.2 17.4

75˚ 450

60˚

900

45˚

1350 0˚

15˚

FC 26.6 15.0 9.6 6.7 4.9 3.7

ITL TEST #55412

ShatterGuard™ Shield (Beneath Lamp) -17 .187” prismatic high strength acrylic. -SG .125” clear polycarbonate.

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet

Cone of Light* Dist. 6 8 10 12 14 16

FC 31.0 17.4 11.1 7.7 5.7 4.4

Dia. 6.1 8.2 10.2 12.3 14.3 16.4

0° SC 1.0 45° SC 1.0 90° SC 1.0 LER=33.2 AEC=$7.24

FSR-09048 (1 Triple 32W) Dia. 7.3 9.7 12.2 14.6 17.0 19.4

0° SC 1.3 45° SC 1.3 90° SC 1.2 LER=35.1 AEC=$6.84

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

30˚

EFFICIENCY: 52.2%

90˚

Cone of Light* Dist. 6 8 10 12 14 16

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

FC 33.5 18.9 12.1 8.4 6.2 4.7

0° SC 1.1 45° SC 1.0 90° SC 1.0 LER=38.1 AEC=$6.30

SofTex Clear reflector. (CP x .89) SofTex Dune reflector. (CP x .85) SofTex Champagne Gold reflector. (CP x .88) SofTex Wheat reflector. (CP x .83) Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Dist. 6 8 10 12 14 16

Trims -70 -71 -90 -91 -94

90˚

Cone of Light*

FSR-09048 (1 Triple 42W)

(Below) With optional wall bracket (Option -WB)

FSR-09047 (1 Triple 32W)

FSR-09047 (1 Triple 42W)

FSR-09047

75˚ 300

60˚

600

45˚

900 0˚

15˚

30˚

EFFICIENCY: 49.5% ITL TEST #48595

Cone of Light* Dist. 6 8 10 12 14 16

FC 21.1 11.9 7.6 5.3 3.9 3.0

Dia. 7.3 9.7 12.2 14.6 17.1 19.5

0° SC 1.3 45° SC 1.3 90° SC 1.2 LER=34.6 AEC=$6.94

box. 1/2" T.S. KO's. (See page 7) -87 Custom pendant / wall bracket / cable length. Specify length. Use with -PM, or -WB. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -QM QuickConnect mount for indoor (damp or dry) use only. (See page 7) -WB Wall bracket mount. Must add Option -89 for wet label listing.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 35

FSR-09049

1 Triple

Since 1895

42 WATT MAXIMUM

Open Shallow Cylinder with Exceptional Efficiency Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware included. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Features

SofTex Dune Option -71 Pendant Mount Option -PM SofTex Champagne Gold Option -90

SofTex Wheat Option -91

Bracket Mount Option -WB

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FSR-09049

FSR-09049 (1 Triple 42W) 90˚

Cone of Light*

75˚

Representative Views:

500

(Above) With optional pendant mount (Option -PM)

60˚

1000

(Below) With optional wall bracket (Option -WB)

Dist. 6 8 10 12 14 16

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 73.4% ITL TEST #54912

Options†

-HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

F 3630

-70 -71 -90 -91 -94

SofTex Clear reflector. (CP x .89) SofTex Dune reflector. (CP x .85) SofTex Champagne Gold reflector. (CP x .88) SofTex Wheat reflector. (CP x .83) Custom color/finish. Specify. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7)

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

FC 37.9 21.3 13.6 9.5 7.0 5.3

Dia. 8.4 11.2 14.0 16.8 19.6 22.3

0° SC 0.5 90° SC 1.4 180° SC 1.5 LER=43.1 AEC=$5.57

-87 Custom pendant / wall bracket / cable length. Specify length. Use with -PM, or -WB. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -QM QuickConnect mount for indoor (damp or dry) use only. (See page 7) -WB Wall bracket mount. Must add Option -89 for wet label listing.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

12"

2 Triple

57 WATT MAXIMUM

12"

3 Triple

57 WATT MAXIMUM

FSR-12050 FSR-12051

Dual Reflector Cylinders with Superior Cut-Off and Photometry Features

All White Option -30

Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends life. Installation • Center point mounting for snug fit to ceiling. Hardware included. • QuickConnect available. (-QM) Pendant Mount • 2" collar for surface J-box. (-80) Option -PM • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Bracket Three Year Limited Warranty Mount Option -WB • Complete standard fixture and ballast.

Lamp • Designed for 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FSR-12050: two 57W triple/four tube. FSR-12051: three 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • FSR-12050: ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) Alzak aluminum, one piece, self-flanged. • See Options for other finishes.

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FSR-12050 (2 Triple 57W) 90˚ 75˚

FSR-12050

1100

FSR-12051

60˚

2200 3300 0˚

45˚ 15˚

30˚

EFFICIENCY: 56.5% ITL TEST #55300

Representative Views: (Above) With optional pendant mount (Option -PM)

90˚ 75˚ 1400

60˚

2800 4200 0˚

45˚ 15˚

30˚

EFFICIENCY: 47.6% ITL TEST #54945

Ballast, Wattage and Voltage -43 Lower wattage. FSR-12050: for 4-pin 2x42/32/26W triple or 26W quad (multiwattage/voltage); FSR-12051: for 4-pin 3x42/32/26W triple or 3x26W quad (multiwattage/voltage). -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Trims -30 -57 -70 -71 -77 -90 -91 -94

All white lower cone. (CP x .95) SofTex Titanium lower cone. (CP x .80) SofTex Clear lower cone. (CP x .89) SofTex Dune lower cone. (CP x .85) SofTex Pewter lower cone. (CP x .81) SofTex Champagne Gold cone. (CP x .88) SofTex Wheat lower cone. (CP x .83) Custom color/finish. Specify. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7)

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

FC 64.5 36.3 23.2 16.1 11.8 9.1

Dia. 8.9 11.9 14.9 17.9 20.9 23.8

0° SC 1.4 45° SC 1.5 90° SC 1.5 LER=34.4 AEC=$6.98

FSR-12051 (3 Triple 57W)

(Below) With optional wall bracket (Option -WB)

Options†

Cone of Light* Dist. 6 8 10 12 14 16

Cone of Light* Dist. FC 6 111.3 8 62.6 10 40.1 12 27.8 14 20.4 16 15.6

Dia. 7.5 10.0 12.5 15.0 17.5 20.0

0° SC 1.2 90° SC 1.3 180° SC 1.3 LER=30.7 AEC=$7.82

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 37

FSR-12052 FSR-12053

12"

1 Triple

70 WATT MAXIMUM

12"

2 Triple

42 WATT MAXIMUM

Since 1895

Flared Cylinders with Exceptional Photometry Features

SofTex Dune Option -71 Pendant Mount Option -PM SofTex Gold Option -90

SofTex Wheat Option -91

Bracket Mount Option -WB

Lamp • Designed for 4-pin triple/four tube amalgam compact fluorescent lamp(s): FSR-12052: one 70W triple/four tube. FSR-12053: two 42/32/26W triple or 26W quad. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FSR-12053: Multi-wattage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • Single circuit wiring or see Option -84. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets FSR-12052 (1 Triple 70W) FSR-12052-43 (1 Triple 57W)

Performance at a Glance* FSR-12052

90˚ 75˚ 700 1400

Representative Views:

60˚ 45˚

2100 0˚

FC 56.6 31.8 20.4 14.1 10.4 8.0

Dia. 8.4 11.2 14.0 16.8 19.7 22.5

90˚ 75˚ 850 1700

60˚ 45˚

2550 0˚

-39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FSR-12052: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage); FSR-12053: 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. (FSR-12053 only) -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Dist. 6 8 10 12 14 16

-75 Remote 1-lamp EM ballast. Specify voltage. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FSR-12053. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FSR-12052. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FSR-12053. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FSR-12052. 13-42W only.

Trims -70 -71 -90 -91 -94

650

60˚

1300

45˚

1950 0˚

SofTex Clear reflector. (CP x .89) SofTex Dune reflector. (CP x .85) SofTex Champagne Gold reflector. (CP x .88) SofTex Wheat reflector. (CP x .83) Custom color/finish. Specify. Consult factory.

Emergency Ballast - Specify Voltage1

Luminaire (Housing) Finishes

-35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

ShatterGuard™ Shield (Beneath Lamp) -17 .187" prismatic high strength acrylic. -SG .125” clear polycarbonate.

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

15˚

FC 58.1 32.7 20.9 14.5 10.7 8.2

30˚

EFFICIENCY: 74.4% ITL TEST #54942

Cone of Light* Dist. 6 8 10 12 14 16

FC 52.5 29.5 18.9 13.1 9.6 7.4

Dia. 8.1 10.9 13.6 16.3 19.0 21.7

0° SC 1.4 90° SC 1.4 180° SC 1.2 LER=44.0 AEC=$5.45

FSR-12053 (2 Triple 32W) 90˚

Cone of Light* Dia. 8.2 11.0 13.7 16.5 19.2 21.9

0° SC 1.4 15˚ 30˚ 45° SC 1.5 EFFICIENCY: 61.1% 90° SC 1.5 ITL TEST #44505 LER=40.8 AEC=$5.89

Ballast, Wattage and Voltage

75˚

FSR-12053 (2 Triple 42W)

(Below) With optional wall bracket (Option -WB)

Options†

90˚

Cone of Light* Dist. 6 8 10 12 14 16

0° SC 1.4 15˚ 30˚ 45° SC 1.4 EFFICIENCY: 70.0% 90° SC 1.4 ITL TEST #54851 LER=43.2 AEC=$5.56

(Above) With optional pendant mount (Option -PM)

FSR-12053

Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Interlocking flare trim. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware included. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

75˚ 750

60˚

1500

45˚

2250 0˚

15˚

30˚

EFFICIENCY: 66.2% ITL TEST #42853

Cone of Light* Dist. 6 8 10 12 14 16

FC 47.2 26.6 17.0 11.8 8.7 6.6

Dia. 8.2 11.0 13.7 16.4 19.2 21.9

0° SC 1.3 90° SC 1.5 180° SC 1.3 LER=39.2 AEC=$6.13

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7) -87 Custom pendant/bracket/cable length. Specify. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -QM QuickConnect mount for indoor (damp or dry) use only. (See page 7) -WB Wall bracket mount. Must add Option -89 for wet label listing.

Other -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. (FSR-12053 only) -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

12"

3 Triple

FSR-12054

42 WATT MAXIMUM

3 x 42 Open Cylinder with Flared Trim Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Interlocking flare trim. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware included. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Features Lamp • Designed for three 4-pin triple tube amalgam compact fluorescent lamps: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes.

SofTex Dune Option -71 Pendant Mount Option -PM SofTex Champagne Gold Option -90

Bracket Mount Option -WB

SofTex Wheat Option -91

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FSR-12054

FSR-12054 (3 Triple 42W) 90˚ 75˚ 850

60˚

Representative Views: (Above) With optional pendant mount (Option -PM) (Below) With optional wall bracket (Option -WB)

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 3x18W triple or 3x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -74 Internal 2-lamp EM ballast. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

1700 2550 0˚

SofTex Clear reflector. (CP x .89) SofTex Dune reflector. (CP x .85) SofTex Champagne Gold reflector. (CP x .88) SofTex Wheat reflector. (CP x .83) Custom color/finish. Specify. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Dia. 8.6 11.5 14.3 17.2 20.0 22.9

30˚

Trims -70 -71 -90 -91 -94

FC 61.9 34.8 22.3 15.5 11.4 8.7

0° SC 1.2 90° SC 1.5 EFFICIENCY: 50.0% 180° SC 1.3 ITL TEST #55660 LER=36.8 AEC=$6.53

15˚

90˚

Cone of Light* Dist. 6 8 10 12 14 16

-HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7)

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

45˚

FSR-12054 (3 Quad 26W) 75˚ 500

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 46.8% ITL TEST #40094

Cone of Light* Dist. 6 8 10 12 14 16

FC 38.6 21.7 13.9 9.7 7.1 5.4

Dia. 8.1 10.8 13.5 16.1 18.8 21.5

0° SC 1.3 90° SC 1.5 180° SC 1.4 LER=26.6 AEC=$9.01

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 39

FSR-12055 FSR-12056

12"

1 Triple

42 WATT MAXIMUM

12"

2 Triple

32 WATT MAXIMUM

Since 1895

X-CELL™ Cross Baffle Cylinders with Excellent Visual Comfort Features

All White Option -30

White Flange Option -31

Wall Wash Option -WW

Pendant Mount Optional

Alzak® aluminum cone and 4 cell parabolic cross baffle, self-flanged. • See Options for other finishes. Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware furnished. • 2" collar for surface J-box mount. (Option -80) • Pendant mount available. (See Option -PM) • Indoor or outdoor for covered ceiling use. UL Listing • Wet, damp or dry locations, covered ceilings. Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for 4-pin triple tube amalgam or quad compact fluorescent lamp(s): FSR-12055: one 42/32/26W triple or 26W quad. FSR-12056: two 32/26W triple. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) semi-specular

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FSR-12055 (1 Triple 42W)

FSR-12055

90˚ 75˚ 450

60˚

900 1350 0˚

45˚ 15˚

30˚

EFFICIENCY: 41.6% ITL TEST #51514

Cone of Light* Dist. 6 8 10 12 14 16

FC 38.2 21.5 13.8 9.5 7.0 5.4

0° SC 0.9 90° SC 1.0 180° SC 0.9 LER=29.6 AEC=$8.11

FSR-12056 (2 Quad 26W)

FSR-12056 (2 Triple 32W)

FSR-12056

90˚ 75˚

Representative View:

600 With optional pendant mount (Option -PM)

60˚

1200 1800 0˚

45˚ 15˚

30˚

EFFICIENCY: 41.7% ITL TEST #54947

Ballast, Wattage and Voltage -39 Installed electronic dimming ballast for FSR12055. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FSR-12055: for 4-pin 18W triple or 18-13W quad; FSR-12056: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. (FSR-12056 only) -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 45.9 25.8 16.5 11.5 8.4 6.4

Dia. 6.8 9.1 11.4 13.6 15.9 18.2

0° SC 1.1 45° SC 1.1 90° SC 1.1 LER=24.5 AEC=$9.79

Options†

Dia. 5.7 7.7 9.6 11.5 13.4 15.3

75˚ 350

60˚

700 1050 0˚

45˚ 15˚

30˚

EFFICIENCY: 31.5% ITL TEST #54863

Cone of Light* Dist. 6 8 10 12 14 16

FC 26.0 14.6 9.4 6.5 4.8 3.7

Dia. 7.0 9.4 11.7 14.0 16.4 18.7

0° SC 1.1 90° SC 1.2 180° SC 1.1 LER=26.5 AEC=$9.05

Mounting -75 Remote 1-lamp EM ballast. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims -30 All white cross baffle and flange. (CP x .95) -31 White flange (only) on cross baffle. -70 SofTex Clear cross baffle. (CP x .92) -94 Custom color/finish. Specify. Consult factory. -WW Wall wash cross baffle.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

-80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7) -87 Custom pendant length. Specify length. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing.

Other -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. (FSR-12056 only) -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

12"

1 Triple

FSR-12057

42 WATT MAXIMUM

4” Deep Super Shallow Lensed Cylinder Features

Trim Assembly • White flat seamless aluminum, self-flanged. • Prismatic C#73 spread distribution lens. Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware furnished. • 2" collar for surface J-box mount. (Option -80) • Indoor or outdoor for covered ceiling use. UL Listing • Wet, damp or dry locations, covered ceilings. Three Year Limited Warranty • Complete standard fixture and ballast.

Opal Diffuser Option -18

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FSR-12057

FSR-12057 (1 Triple 42W) 90˚ 75˚ 350

60˚

700 1050 0˚

45˚ 15˚

30˚

EFFICIENCY: 66.8% ITL TEST #52486

Cone of Light* Dist. 6 8 10 12 14 16

FC 28.1 15.8 10.1 7.0 5.2 4.0

Dia. 7.6 10.1 12.7 15.2 17.7 20.3

0° SC 1.2 90° SC 1.3 180° SC 1.3 LER=47.4 AEC=$5.06

Options†

Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-36 -37 -38 -94

Lenses and Trims

-80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7)

-17 -18 -21 -46 -CF

.187” prismatic high strength acrylic lens. Opal flat glass diffuser. White flat polycarbonate diffuser. Gasket between trim and lens. High temperature color filter added to lens assembly. Specify color. -UV UV filter. Consult factory.

Mounting

Luminaire (Housing) Finishes -35 Natural aluminum acrylic enamel.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 41

FSR-06058 FSR-09059

1 Triple

26 WATT MAXIMUM

1 Triple

42 WATT MAXIMUM

Since 1895

Versatile Regressed Lens Cylinders Features

White Grooveless Flare Option -40

Pendant Mount Option -PM

Fresnel Lens Option -FR

Bracket Mount Option -WB

Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware furnished. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FSR-06058: 26W triple. FSR-09059: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FSR-06058 (1 Triple 26W) 90˚

FSR-06058

75˚

FSR-09059

120

60˚

240

45˚

360 0˚

Representative Views:

15˚

30˚

EFFICIENCY: 41.9% ITL TEST #42382

(Above) With optional pendant mount (Option -PM)

Cone of Light* Dist. 6 8 10 12 14 16

FC 8.6 4.8 3.1 2.1 1.6 1.2

Dia. 8.7 11.7 14.6 17.5 20.4 23.3

0° SC 1.5 45° SC 1.5 90° SC 1.5 LER=25.9 AEC=$9.26

FSR-09059 (1 Triple 42W) (Below) With optional wall bracket (Option -WB)

90˚ 75˚ 400

Option -40 Also Shown

60˚

800

Option -40 Also Shown

45˚

1200 0˚

15˚

30˚

EFFICIENCY: 44.2% ITL TEST #47479

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Cone of Light* Dist. 6 8 10 12 14 16

FC 31.5 17.7 11.4 7.9 5.8 4.4

Dia. 5.7 7.6 9.5 11.4 13.3 15.2

0° SC 1.0 45° SC 0.9 90° SC 0.9 LER=36.0 AEC=$6.67

Lenses and Trims

Mounting

-13 Vandal resistant tempered prismatic C#73 lens above 1/8” flat polycarbonate. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum egg-crate louver (1/2” cubes). -21 White flat polycarbonate diffuser. -40 White grooveless flare trim. (CP x 1.10) -46 Gasket between trim and lens. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -HO Holophane concave prismatic tempered lens. (FSR-09059 only) -UV UV filter. Consult factory.

-54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7) -87 Custom pendant / bracket length. Specify. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -QM QuickConnect mount for FSR-09059 only. Indoor (damp or dry) use only. (See page 7) -WB Wall bracket mount. Must add Option -89 for wet label listing.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

1 Triple

42 WATT MAXIMUM

12"

1 Triple

70 WATT MAXIMUM

FSR-09060 FSR-12061

Shallow Regressed Lens Cylinders Features

• Regressed tempered prismatic C#73 lens. Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware furnished. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple/four tube amalgam or quad compact fluorescent lamp: FSR-09060: 42/32/26W triple or 26W quad. FSR-12061: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • FSR-09060: Multi-wattage/voltage. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove with white flange or all white smooth self-flanged trim (Option -40) as shown in section view.

FSR-09060

90˚ 75˚ 350

60˚

700

Representative Views:

45˚

1050 0˚

90˚ 75˚ 900

60˚

1800 2700 0˚

Option -40 Also Shown

Ballast, Wattage and Voltage -39 Installed electronic dimming ballast for FSR09060. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FSR-09060: for 4-pin 18W triple or 18-13W quad; FSR-12061: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

45˚ 15˚

30˚

EFFICIENCY: 58.7% ITL TEST #55030

Cone of Light* Dist. 6 8 10 12 14 16

FC 24.2 13.6 8.7 6.0 4.4 3.4

Dia. 7.1 9.5 11.9 14.2 16.6 19.0

FSR-12061-43 (1 Triple 57W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 72.5 40.8 36.1 18.1 13.3 10.2

Dia. 5.0 6.7 8.4 10.1 11.8 13.5

0° SC 0.9 90° SC 0.8 180° SC 0.9 LER=38.1 AEC=$6.30

75˚ 850

60˚

1700

45˚

2550 0˚

15˚

30˚

EFFICIENCY: 63.1% ITL TEST #55031

Cone of Light* Dist. 6 8 10 12 14 16

FC 67.0 37.7 24.1 16.8 12.3 9.4

Dia. 4.9 6.5 8.2 9.8 11.4 13.1

0° SC 0.9 90° SC 0.8 180° SC 0.8 LER=40.4 AEC=$5.95

Lenses and Trims

Mounting

-13 Vandal resistant tempered prismatic C#73 lens above 1/8” flat polycarbonate. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum egg-crate louver for FSR-12061 (1/2” cubes). -21 White flat polycarbonate diffuser for FSR-12061. -40 White grooveless flare trim. (CP x 1.10) -46 Gasket between trim and lens. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -HO Holophane concave prismatic tempered lens for FSR-12061 only. -UV UV filter. Consult factory.

-54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7) -87 Custom pendant/bracket/cable length. Specify. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -QM QuickConnect mount for indoor (damp or dry) use only. (See page 7) -WB Wall bracket mount. Must add Option -89 for wet label listing.

Luminaire (Housing) Finishes

Other

-35 -36 -37 -38 -94

-99 Special modification. Consult factory. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Bracket Mount Option -WB

FSR-12061 (1 Triple 70W)

(Below) With optional wall bracket (Option -WB)

Options†

Pendant Mount Option -PM

0° SC 1.0 15˚ 30˚ 90° SC 1.3 180° SC 1.3 EFFICIENCY: 49.3% ITL TEST #45268 LER=29.6 AEC=$8.11

(Above) With optional pendant mount (Option -PM)

FSR-12061

Fresnel Lens Option -FR

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets FSR-09060 (1 Triple 42W)

Performance at a Glance*

Option -40 Also Shown

White Grooveless Flare Option -40

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 43

FSR-12062 FSR-12063

12"

2 Triple

32 WATT MAXIMUM

12"

2 Triple

42 WATT MAXIMUM

Since 1895

Shallow Multi-Lamp Lensed Cylinders trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens. Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware furnished. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Features

White Grooveless Flare Option -40

Fresnel Lens Option -FR

Pendant Mount Option -PM

Bracket Mount Option -WB

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: FSR-12062: 32/26W triple. FSR-12063: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove with white flange or all white smooth self-flanged

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FSR-12062 (2 Triple 32W)

FSR-12062

90˚ 75˚ 700

60˚

1400

45˚

2100 0˚

Option -40 Also Shown FSR-12063

(Above) With optional pendant mount (Option -PM)

90˚ 75˚ 950

60˚

1900

45˚

2850 0˚

Option -40 Also Shown

15˚

30˚

EFFICIENCY: 49.7% ITL TEST #55047

-39 Installed electronic dimming ballast for FSR12063. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FSR-12063. -75 Remote 1-lamp EM ballast for FSR-12062. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FSR-12063. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FSR-12062. Specify voltage. 1

90˚ 75˚ 500

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 49.3% ITL TEST #55294

Cone of Light* Dist. 6 8 10 12 14 16

FC 40.9 23.0 14.7 10.2 7.5 5.8

Dia. 5.3 7.1 8.9 10.7 12.5 14.2

0° SC 0.9 45° SC 0.9 90° SC 0.9 LER=29.1 AEC=$8.23

-13 Vandal resistant tempered prismatic C#73 lens above 1/8” flat polycarbonate. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate diffuser. -40 White grooveless flare trim. (CP x 1.10) -46 Gasket between trim and lens. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -HO Holophane concave prismatic tempered lens. -UV UV filter. Consult factory.

Luminaire (Housing) Finishes Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

FC 75.6 42.5 27.2 18.9 13.9 10.6

Dia. 5.2 6.9 8.6 10.4 12.1 13.8

0° SC 0.9 45° SC 0.9 90° SC 0.9 LER=33.3 AEC=$7.21

Lenses and Trims

* Photometric Definitions and Keys begin on page 83.

Dia. 5.2 6.9 8.6 10.3 12.1 13.8

Cone of Light* Dist. 6 8 10 12 14 16

-HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FSR-12063. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FSR-12062. 13-42W only.

-35 -36 -37 -38 -94

FC 58.1 32.7 20.9 14.5 10.7 8.2

FSR-12063 (2 Triple 42W)

(Below) With optional wall bracket (Option -WB)

Ballast, Wattage and Voltage

Dist. 6 8 10 12 14 16

0° SC 0.9 15˚ 30˚ 45° SC 0.9 EFFICIENCY: 50.6% 90° SC 0.9 ITL TEST #55048 LER=30.0 AEC=$7.99

Representative Views:

Options†

FSR-12062 (2 Triple 26W)

Cone of Light*

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7) -87 Custom pendant/bracket/cable length. Specify. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -QM QuickConnect mount for indoor (damp or dry) use only. (See page 7) -WB Bracket mount. Must add -89 for wet label .

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

12"

2 Triple

57 WATT MAXIMUM

12"

3 Triple

42 WATT MAXIMUM

FSR-12064 FSR-12065

Regressed Lens Cylinders: High Lumen Output Features Lamp • Designed for 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FSR-12064: two 57W triple/four tube. FSR-12065: three 42/32/26W triple or 26W quad. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • FSR-12064: ClickQuick connectors for easy service. • FSR-12065: Multi-wattage. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum one piece black OptiGroove

Performance at a Glance* FSR-12064

FSR-12065

with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens. Aluminum Housing White • White seamless acrylic enameled. Rustproof: Grooveless Flare Exceeds 1000 hour ASTM 5% salt spray test. Option -40 • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation Fresnel Lens • Center point mounting for snug fit to ceiling. Option -FR Mounting hardware furnished. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listing • Wet, damp or dry locations, covered ceilings. (See Option -89) Pendant Mount Option -PM Three Year Limited Warranty • Complete standard fixture and ballast.

Bracket Mount Option -WB

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets FSR-12064-43 (2 Triple 42W) FSR-12064 (2 Triple 57W) 90˚ 75˚ 900

60˚

1800 2700 0˚

45˚

FC 70.9 39.9 25.5 17.7 13.0 10.0

Dia. 5.7 7.5 9.4 11.3 13.2 15.1

0° SC 0.9 45° SC 0.9 90° SC 0.9 EFFICIENCY: 41.6% ITL TEST #54940 LER=31.2 AEC=$7.69

15˚

90˚

Cone of Light* Dist. 6 8 10 12 14 16

30˚

75˚ 950

60˚

1900

45˚

2850 0˚

15˚

30˚

EFFICIENCY: 49.7% ITL TEST #55047

Cone of Light* Dist. 6 8 10 12 14 16

FC 75.6 42.5 27.2 18.9 13.9 10.6

Dia. 5.2 6.9 8.6 10.4 12.1 13.8

0° SC 0.9 45° SC 0.9 90° SC 0.9 LER=33.3 AEC=$7.21

FSR-12065 (3 Triple 42W) 90˚

Option -40 Also Shown

75˚ 1150

Representative Views:

2300

(Left) With optional pendant mount (Option -PM)

3450 0˚

Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FSR-12064: for 4-pin 2x42/32/26W triple or 2x26W quad (multiwattage/voltage). FSR-12065: for 4-pin 3x18W triple or 3x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FSR-12065. -75 Remote 1-lamp EM ballast for FSR-12064. -CE Internal cold weather (-20° to 55°C) 1-lamp 1

45˚

FC 94.9 53.4 34.2 23.7 17.4 13.4

Dia. 5.9 7.8 9.8 11.8 13.7 15.7

0° SC 1.0 15˚ 30˚ 90° SC 1.0 EFFICIENCY: 50.8% 180° SC 1.0 ITL TEST #49001 LER=37.4 AEC=$6.42

(Right) With optional wall bracket (Option -WB)

Options†

60˚

Cone of Light* Dist. 6 8 10 12 14 16

EM ballast for FSR-12065. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FSR-12064. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FSR-12065. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FSR-12064. 13-42W only.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 lens above 1/8” flat polycarbonate. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -40 White grooveless flare trim. (CP x 1.10) -46 Gasket between trim and lens. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -HO Holophane concave prismatic tempered lens. -UV UV filter. Consult factory.

Luminaire (Housing) Finishes

Other -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and12,000 hour life. Specify wattage, style and color temperature.

-35 Natural aluminum acrylic enamel. -36 Gold acrylic enamel. -37 Dark Bronze acrylic enamel. -38 Black acrylic enamel. -94 Custom color/finish. Specify. Consult factory. Visit www.kirlinlighting.com for most current performance / specifications. † Additional information and photos are shown on pages 5-7.

Alzak® is a registered trademark of ALCOA.

* Photometric Definitions and Keys begin on page 83. 45

FWR-06066 FWR-09067

2 Triple

32 WATT MAXIMUM

2 Triple

42 WATT MAXIMUM

Since 1895

Open Direct/Indirect: Sleek Proportions Features Lamp • Designed for one direct/one indirect 4-pin triple tube amalgam or quad compact fluorescent: FWR-06066: one each 32/26W triple direct and indirect. FWR-09067: one each 42/32/26W triple or 26W quad direct and indirect. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD.

SofTex Dune Option -71

SofTex Champagne Gold Option -90

SofTex Wheat Option -91

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FWR-06066

Reflectors • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. • See Options for other finishes. Housing • Seamless (FWR-06066) white acrylic enameled aluminum with wall bracket. • FWR-09067: Interlocking flare trim (direct). • Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible hardware. • Cool operation: Extends component life. Installation • Wall bracket extrusion assembled to housing. Wall plate included, for recessed outlet box. • Mounting hardware included. • Indoor/outdoor for covered ceiling use (see -86). UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. (See Option -86) Three Year Limited Warranty • Complete standard fixture and ballast.

FWR-09067

FWR-06066 (1/1 Triple 32W) 180˚165˚150˚

135˚

500

FWR-06066 (1/1 Triple 26W) 180˚165˚150˚

120˚ 105˚

90˚

60˚

500

(Right) With optional pendant mount (Option -PM)

Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast (direct position). -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast (direct position). Specify voltage. 1

60˚ 45˚

90˚ 75˚

500 1000

60˚ 45˚

EFFICIENCY: 47.7% ITL TEST #54919 LER=29.0 AEC=$8.28

EFFICIENCY: 48.9% ITL TEST #55053 LER=28.1 AEC=$8.53

EFFICIENCY: 58.5% ITL TEST #54924 LER=36.4 AEC=$6.60

Trims (Direct Position Only)

Emergency Ballast - Specify Voltage1

500

105˚

0° SC 1.0 90° SC 1.1 180° SC 1.1

Ballast, Wattage and Voltage

SofTex Clear reflector. (CP x .89) SofTex Dune reflector. (CP x .85) SofTex Champagne Gold reflector. (CP x .88) SofTex Wheat reflector. (CP x .83) Custom color/finish. Specify. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

0° SC 1.2 45° SC 1.3 90° SC 1.3

-HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast (direct position). 13-42W only. -70 -71 -90 -91 -94

90˚

0° SC 1.3 90° SC 1.3 180° SC 1.3

Options† -39 Installed electronic dimming ballast for both lamps. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

45˚

105˚

500

75˚ 250

135˚ 120˚

120˚ 250

75˚ 250

180˚165˚150˚ 1000

500

250

Representative View:

135˚

FWR-09067 (1/1 Triple 42W)

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

ShatterGuard™ Shield (Beneath Lamp) -SG .125” clear poly (FWR-09067 direct only).

Mounting

custom pendant stem (other than 48”) or wall bracket length (FWR-09067). Specify length. -88 Swivel canopy (FWR-09067) for sloped ceilings up to 40°. Use with -PM. -PM Pendant mount for FWR-09067 for damp or dry locations only. 48” stem plus 4” offset (see diagram). Also see Option -87.

Other -86 Prismatic WeatherCap (indirect position) tempered glass lens. Required for wet label. Not available with -PM. -99 Special modification. Consult factory. -DN Downlight only version of direct / indirect. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

-87 Custom wall bracket length (FWR-06066) or

Visit www.kirlinlighting.com for most current performance / specifications. Photometric Definitions and Keys begin on page 83.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

2 Triple

32 WATT MAXIMUM

2 Triple

42 WATT MAXIMUM

FWR-06068 FWR-09069

Lensed Direct/Indirect: Wall Mount Features Lamp • Designed for one direct/one indirect 4-pin triple tube amalgam or quad compact fluorescent: FWR-06068: one each 32/26W triple direct and indirect. FWR-09069: one each 42/32/26W triple or 26W quad direct and indirect. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • Specular Alzak® aluminum. Trim Assemblies - FWR-06068 • Direct and Indirect: Tapered aluminum one piece black OptiGroove with white flange or see Option -40. Regressed tempered prismatic C#73 lens.

Trim Assemblies - FWR-09069 • Direct: Tapered aluminum one piece black OptiGroove with white flange or see Option -40. Regressed tempered prismatic C#73 lens. White • Indirect: Tempered C#73 prismatic glass lens. Grooveless Flare Housing Option -40 • Seamless (FWR-06068) white acrylic enameled aluminum with wall bracket. • Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. Fresnel Lens • No visible hardware. Option -FR • Cool operation: Extends component life. Installation • Wall bracket extrusion assembled to housing. Wall plate included, for recessed outlet box. • Mounting hardware included. • Indoor/outdoor for covered ceiling use (see -86). UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. (See Option -86) Pendant Mount Three Year Limited Warranty Option -PM • Complete standard fixture and ballast. For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FWR-06068

FWR-09069

FWR-06068 (1/1 Triple 32W) 180˚165˚150˚

FWR-06068 (1/1 Triple 26W)

135˚

600

180˚165˚150˚

120˚ 105˚

90˚

600

Representative View: (Right) With optional pendant mount (Option -PM)

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast for both lamps. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast (direct position). -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast (direct position). Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast (direct position). 13-42W only. 1

60˚

90˚

500 0

540

60˚ 45˚

105˚ 90˚ 75˚

500 1000

60˚ 45˚

0° SC 1.0 90° SC 1.0 180° SC 1.0

0° SC 1.0 45° SC 1.0 90° SC 1.0

0° SC 1.0 90° SC 1.1 180° SC 1.1

EFFICIENCY: 35.2% ITL TEST #54920 LER=22.6 AEC=$10.64

EFFICIENCY: 41.3% ITL TEST #43979 LER=25.0 AEC=$9.69

EFFICIENCY: 51.7% ITL TEST #54925 LER=36.9 AEC=$6.50

Lenses (Direct Position Only)

Mounting

-13 Vandal resistant tempered prismatic C#73 lens above 1/8” flat polycarbonate. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate diffuser. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -HO Holophane concave prismatic tempered lens for FWR-09069. -UV UV filter. Consult factory.

-87 Custom wall bracket length (FWR-06068) or custom pendant stem (other than 48”) or wall bracket length (FWR-09069). Specify length. -88 Swivel canopy (FWR-09069) for sloped ceilings up to 40°. Use with -PM. -PM Pendant mount for FWR-09069 for damp or dry locations only. 48” stem plus 4” offset (see diagram). Also see Option -87.

Trims (Direct and Indirect Position) -40 White grooveless flare trim. (CP x 1.10) -46 Gasket between trim and lens.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

45˚

105˚

75˚ 270

135˚ 120˚

120˚ 270

75˚ 300

180˚165˚150˚ 1000

540

300

Option -40 Also Shown

135˚

FWR-09069 (1/1 Triple 42W)

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 47

FWR-12070 FWR-12071

12"

2 Triple

70 WATT MAXIMUM

12"

4 Triple

42 WATT MAXIMUM

Since 1895

Open Direct/Indirect: High Lumen Package Features

SofTex Dune Option -71

SofTex Champagne Gold Option -90

SofTex Wheat Option -91

Lamp • Designed for 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FWR-12070: one each 70W triple/four tube direct and indirect. FWR-12071: two each 42/32/26W triple or 26W quad direct and indirect. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FWR-12071: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Trim Assemblies / Reflectors • Direct: Low iridescence (L.I.) Alzak® one piece, self-flanged reflector or see Options.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FWR-12070

• Indirect: Specular Alzak aluminum reflector with tempered C#73 prismatic glass lens. Housing • Seamless white acrylic enameled aluminum with wall bracket. • Interlocking flare trim (direct position). • Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible hardware. • Cool operation: Extends component life. Installation • Wall bracket extrusion assembled to housing. Wall plate included, for recessed outlet box. • Mounting hardware included. • Indoor/outdoor for covered ceiling use (see -86). UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. (See Option -86) Three Year Limited Warranty • Complete standard fixture and ballast.

FWR-12070 (1/1 Triple 70W)

FWR-12071

180˚165˚150˚

FWR-12071 (2/2 Triple 42W)

135˚

1600

180˚165˚150˚

120˚ 800

105˚

90˚

120˚ 1000 0

75˚ 800

Representative View: (Right) With optional pendant mount (Option -PM)

Options† Ballast, Wattage and Voltage -43 Lower wattage. FWR-12070: for 4-pin 2x57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage); FWR12071: for 4-pin 4x18W triple or 18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast (direct position). -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast (direct position). Specify voltage. 1

-HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast (direct position). 13-42W only.

Trims (Direct Position Only) -70 -71 -90 -91 -94

SofTex Clear reflector. (CP x .89) SofTex Dune reflector. (CP x .85) SofTex Champagne Gold reflector. (CP x .88) SofTex Wheat reflector. (CP x .83) Custom color/finish. Specify. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

60˚

1600

2 LAMPS IN EACH POSITION

1 LAMP IN EACH POSITION

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

ShatterGuard™ Shield (Beneath Lamp) -SG .125” clear polycarbonate (direct only).

Mounting

135˚

2000

45˚

105˚ 90˚ 75˚

1000 2000

60˚ 45˚

0° SC 1.3 90° SC 1.4 180° SC 1.4

0° SC 1.3 45° SC 1.3 90° SC 1.3

EFFICIENCY: 56.5% ITL TEST #54922 LER=33.0 AEC=$7.27

EFFICIENCY: 56.3% ITL TEST #54921 LER=35.9 AEC=$6.69

bracket length. Specify length. -88 Swivel canopy for sloped ceilings up to 40°. Use with -PM. -PM Pendant mount for damp or dry locations only. 48” stem plus 4” offset (see diagram). See -87.

-87 Custom pendant stem (other than 48”) or wall

Visit www.kirlinlighting.com for most current performance / specifications. Photometric Definitions and Keys begin on page 83.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

12"

2 Triple

70 WATT MAXIMUM

12"

4 Triple

42 WATT MAXIMUM

FWR-12072 FWR-12073

Lensed Direct/Indirect for 2 or 4 Lamps Features

Trim Assemblies • Direct: Tapered aluminum one piece black OptiGroove with white flange or see Option -40. Regressed tempered prismatic C#73 lens. • Indirect: Tempered C#73 prismatic glass lens. Housing • Seamless white acrylic enameled aluminum with wall bracket. • Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible hardware. • Cool operation: Extends component life. Installation • Wall bracket extrusion assembled to housing. Wall plate included, for recessed outlet box. • Mounting hardware included. • Indoor/outdoor for covered ceiling use (see -86). UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. (See Option -86) Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FWR-12072: one each 70W triple/four tube direct and indirect. FWR-12073: two each 42/32/26W triple or 26W quad direct and indirect. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • FWR-12073: Multi-wattage/voltage. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • Specular Alzak® aluminum.

Pendant Mount Option -PM

FWR-12072 (1/1 Triple 70W)

FWR-12073

180˚165˚150˚

135˚

2500

FWR-12073 (2/2 Triple 42W) 180˚165˚150˚

120˚ 105˚

90˚

120˚ 1500 0

75˚ 1250

Option -40 Also Shown 1 LAMP IN EACH POSITION

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast (direct position). -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast (direct position). Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast (direct position). 13-42W only. 1

90˚ 75˚

1500 3000

60˚ 45˚

0° SC 0.9 90° SC 0.7 180° SC 0.9

0° SC 0.8 45° SC 0.8 90° SC 0.8

EFFICIENCY: 52.4% ITL TEST #54926 LER=34.5 AEC=$6.96

EFFICIENCY: 55.4% ITL TEST #54923 LER=37.9 AEC=$6.34

Lenses (Direct Position Only)

Mounting

-13 Vandal resistant tempered prismatic C#73 lens above 1/8” flat polycarbonate. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate diffuser. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -HO Holophane concave prismatic tempered lens. -UV UV filter. Consult factory.

-87 Custom pendant stem (other than 48”) or wall bracket length. Specify length. -88 Swivel canopy for sloped ceilings up to 40°. Use with -PM. -PM Pendant mount for damp or dry locations only. 48” stem plus 4” offset (see diagram). See -87.

Trims (Direct and Indirect Position) -40 White grooveless flare trim. (CP x 1.10) -46 Gasket between trim and lens.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

45˚

105˚

2 LAMPS IN EACH POSITION

(Right) With optional pendant mount (Option -PM)

-43 Lower wattage. FWR-12072: for 4-pin 2x 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage); FWR-12073: for 4-pin 4x18W triple or 4x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

60˚

2500

Representative View:

Ballast, Wattage and Voltage

135˚

3000

1250

Options†

Fresnel Lens Option -FR

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FWR-12072

White Grooveless Flare Option -40

Other -86 Prismatic WeatherCap (indirect position) tempered glass lens. Required for wet label. Not available with -PM. -99 Special modification. Consult factory. -DN Downlight only version of direct/indirect. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 49

FRV-10074 - Type IC FRV-10075

10"

1 Triple

42 WATT MAXIMUM

10"

1 Triple

70 WATT MAXIMUM

Since 1895

Vandal Resistant: Attractive and Shallow Air Tight Version Available • Lens combines 1/4” clear polycarbonate below with prismatic .187” high-strength acrylic. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. • Tamperproof tools included. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC (non-dimming). FRV-10074 approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

White Grooveless Flare Option -40

Lamp • Designed for one 4-pin triple/four tube amalgam or quad compact fluorescent lamp: FRV-10074: 42/32/26W triple or 26W quad. FRV-10075: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRV-10074: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim / Lens Assembly • Vandal resistant tapered aluminum one piece black OptiGroove with white flange or see -40. • Flush tamperproof hex screws with center pin secure trim to captive nuts in housing. • Continuous ring and four screws secure lens.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRV-10074 (1 Triple 42W)

FRV-10074: Type IC

90˚

Cone of Light*

75˚

Ceiling Cut-out 10½" Dia.

350

60˚

700

45˚

1050 0˚

15˚

30˚

EFFICIENCY: 49.3% ITL TEST #45268

Option -40 Also Shown

Dist. 6 8 10 12 14 16

0° SC 1.0 90° SC 1.3 180° SC 1.3 LER=29.6 AEC=$8.11

90˚ 400

Options†

45˚

1200 0˚

15˚

30˚

EFFICIENCY: 46.3%

Option -40 Also Shown

Dist. 6 8 10 12 14 16

60˚

800

Ceiling Cut-out 10½" Dia.

ITL TEST #54897

-39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRV-10074: for 4-pin 18W triple or 18-13W quad; FRV-10075: for 4pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1

Lenses and Trims -32 White oversize trim ring. Specify O.D. -40 White tamperproof flare trim. (CP x 1.10)

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

FC 32.0 18.0 11.5 8.0 5.9 4.5

Dia. 7.2 9.5 11.9 14.3 16.7 19.1

0° SC 1.2 90° SC 1.2 180° SC 1.1 LER=38.8 AEC=$6.19

damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FRV-10074. -75 Remote 1-lamp EM ballast for FRV-10075. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRV-10074. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRV-10075. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRV-10074. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRV-10075. 13-42W only.

Ballast, Wattage and Voltage

FRV-10075-43 (1 Triple 57W) 90˚

Cone of Light*

75˚

Dia. 7.1 9.5 11.9 14.2 16.6 19.0

FRV-10075 (1 Triple 70W)

FRV-10075

Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for

FC 24.2 13.6 8.7 6.0 4.4 3.4

-45 -46 -79 -94 -CF -UV

75˚ 400 800 1200 0˚

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 30.2 17.0 10.9 7.5 5.5 4.2

Dia. 7.1 9.4 11.8 14.1 16.5 18.8

0° SC 1.2 15˚ 30˚ 90° SC 1.2 EFFICIENCY: 51.6% 180° SC 1.1 ITL TEST #54898 LER=32.8 AEC=$7.32

Gasket between ceiling and trim flange. Gasket between trim and lens. Extension collar for ceilings up to 2” thick. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. UV filter. Consult factory.

Other -99 Special modification. Consult factory. -AT Air tight with Type IC for FRV-10074. Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

10"

2 Triple

32 WATT MAXIMUM

12"

2 Triple

42 WATT MAXIMUM

FRV-10076 FRV-12077

Attractive and Versatile Vandal Resistant Features

• Continuous ring and four screws secure lens. • Lens combines 1/4” clear polycarbonate below with prismatic .187” high-strength acrylic. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. • Tamperproof tools included. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: FRV-10076: 32/26W triple or 26W quad. FRV-12077: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim / Lens Assembly • Vandal resistant tapered aluminum one piece black OptiGroove with white flange or see -40. • Flush tamperproof hex screws with center pin secure trim to captive nuts in housing.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FRV-10076

75˚ 350

60˚

700 1050 0˚

45˚

Ceiling Cut-out 10½" Dia.

15˚

FC 27.8 15.6 10.0 6.9 5.1 3.9

Dia. 6.7 9.0 11.2 13.5 15.7 18.0

75˚ 130

60˚

260

45˚

390 0˚

600 1200 1800 0˚

Ceiling Cut-out 12¼" Dia.

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from

60˚ 45˚

Dist. 6 8 10 12 14 16

Dia. 5.3 7.0 8.8 10.5 12.3 14.1

0° SC 0.9 15˚ 30˚ 45° SC 0.9 EFFICIENCY: 38.7% 90° SC 0.9 ITL TEST #45267 LER=23.8 AEC=$10.08

Lenses and Trims White oversize trim ring. Specify O.D. White tamperproof flare trim. (CP x 1.10) Gasket between ceiling and trim flange. Gasket between trim and lens. Extension collar for ceilings up to 2” thick.

Visit www.kirlinlighting.com for most current performance / specifications.

FC 46.0 25.9 16.6 11.5 8.5 6.5

30˚

ITL TEST #42383

Cone of Light* Dist. 6 8 10 12 14 16

FC 10.3 5.8 3.7 2.6 1.9 1.5

Dia. 7.1 9.5 11.8 14.2 16.6 18.9

0° SC 1.2 90° SC 1.3 180° SC 1.3 LER=14.6 AEC=$16.45

FRV-12077 (2 Triple 32W) 90˚

Cone of Light*

15˚

EFFICIENCY: 25.9%

FRV-12077 (2 Triple 42W) 75˚

Alzak® is a registered trademark of ALCOA.

Dist. 6 8 10 12 14 16

30˚

90˚

Cone of Light*

0° SC 1.1 45° SC 1.2 90° SC 1.3 EFFICIENCY: 42.3% ITL TEST #45266 LER=26.8 AEC=$8.97

FRV-12077

Option -40 Also Shown

FRV-10076 (2 Quad 26W)

FRV-10076 (2 Triple 32W) 90˚

Option -40 Also Shown

White Grooveless Flare Option -40

75˚ 500

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 49.2% ITL TEST #42385

Cone of Light* Dist. 6 8 10 12 14 16

FC 40.3 22.7 14.5 10.1 7.4 5.7

Dia. 5.8 7.7 9.6 11.5 13.5 15.4

0° SC 1.0 45° SC 1.0 90° SC 1.0 LER=30.1 AEC=$7.97

-94 Custom color/finish. Specify. Consult factory. -CF High temperature color filter. Specify color. -UV UV filter. Consult factory.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 51

FSV-12078

12"

2 Triple

Since 1895

42 WATT MAXIMUM

Surface Mount Vandal Resistant Features

White Grooveless Flare Option -40

Pendant Mount Option -PM

Bracket Mount Option -WB

• Lens combines 1/4” clear polycarbonate below with prismatic .187” high-strength acrylic. Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware included. • QuickConnect mounting available. (Option -QM) • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) • Tamperproof tools included. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim / Lens Assembly • Vandal resistant tapered aluminum one piece black OptiGroove with white flange or see -40. • Flush tamperproof hex screws with center pin secure trim to captive nuts in housing. • Continuous ring and four screws secure lens.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FSV-12078

FSV-12078 (2 Triple 42W) 90˚ 75˚

Representative Views: (Above) With optional pendant mount (Option -PM) (Below) With optional wall bracket (Option -WB)

600 1200 1800 0˚

60˚ 45˚

FSV-12078 (2 Triple 32W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 46.0 25.9 16.6 11.5 8.5 6.5

Dia. 5.3 7.0 8.8 10.5 12.3 14.1

0° SC 0.9 15˚ 30˚ 45° SC 0.9 EFFICIENCY: 38.7% 90° SC 0.9 ITL TEST #45267 LER=23.8 AEC=$10.08

75˚ 500

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 49.2% ITL TEST #42385

Cone of Light* Dist. 6 8 10 12 14 16

FC 40.3 22.7 14.5 10.1 7.4 5.7

Dia. 5.8 7.7 9.6 11.5 13.5 15.4

0° SC 1.0 45° SC 1.0 90° SC 1.0 LER=30.1 AEC=$7.97

Option -40 Also Shown

Options†

-HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -74 Internal 2-lamp EM ballast. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

Lenses and Trims -40 -46 -94 -CF -UV

White tamperproof flare trim. (CP x 1.10) Gasket between trim and lens. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. UV filter. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7)

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

10"

85 WATT MAXIMUM

11"

165 WATT MAXIMUM

QRR-10079 QRR-11080

Open QL Induction Downlights: 55-165 Watt Features Lamp Vessel (Included) • One vertical QL lamp vessel: QRR-10079: 85W (maximum). QRR-11080: 165W (maximum). • See Option -43 for lower wattages. • High efficiency with low operating costs. • Electrode-less induction lamp vessel with power coupler. Extra long 100,000 hour system life. • Flicker-free instant-on, high light output, excellent color rendering (>80 CRI). Constant color. • QRR-11080: Extruded heat sink surrounds lamp base. • Indoor or outdoor use. -30oF rated. • 3000oK standard. Add Option -LT for 4000oK. • Resistant to voltage fluctuation and vibration. Generator • Electronic high frequency generator. • 120 volt standard. • For other input voltages, see Option -97. Reflectors - QRR-10079 • Upper: Specular Alzak® aluminum. • Lower: Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged.

Reflector - QRR-11080 • Low iridescence (L.I.) specular Alzak® aluminum, one piece, self-flanged. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast. Thermal Protection (Per Current NEC) • Thermal protector included.

White Flange Option -31

100,000 Hour Life Ideal for Inaccessible Areas: Stairwells Freezers Mass Transit

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

Ceiling Cut-out 10¼" Dia.

QRR-10079

QRR-10079 (QL 85W) 90˚ 75˚ 1050

60˚

2100 3150 0˚

45˚ 15˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 84.5 47.5 30.4 21.1 15.5 11.9

Dia. 6.7 8.9 11.2 13.4 15.6 17.9

30˚

EFFICIENCY: 63.5% SC 1.1 ITL TEST #51090 LER=48.0 AEC=$5.00

QRR-11080 QRR-11080 (QL 165W) 90˚ 75˚ 1750

60˚

3500 5250 0˚

45˚ 15˚

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

30˚

EFFICIENCY: 64.5% ITL TEST #54799

Ceiling Cut-out 12¼" Dia.

Cone of Light* Dist. FC 6 142.9 8 80.4 10 51.5 12 35.7 14 26.3 16 20.1

SC 1.1 LER=47.4 AEC=$5.07

Options† Trims Generator, Wattage and Voltage -43

Lower wattage. QRR-10079: QL 55 watt; QRR-11080: QL 85 or 55 watt. Specify wattage and voltage.

-58 277 volt 60 Hz. ballast. -97 Other input voltage. Consult factory.

-31 White acrylic enameled lower cone/reflector flange. -32 White oversize trim ring. Specify O.D. -45 Gasket between ceiling and cone/reflector flange. -79 Extension collar for ceilings up to 2” thick.

-82 Sloped ceiling adapter for QRR-10079. Specify slope in 5o increments up to 30o. -94 Custom color/finish. Specify. Consult factory.

Other -99 Special modification. Consult factory. -LT

With 4000oK lamp vessel instead of standard 3000oK lamp.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

* Photometric Definitions and Keys begin on page 83. 53

QRR-08081 QRR-11082

85 WATT MAXIMUM

11"

85 WATT MAXIMUM

Regressed Lens QL Induction Downlights Features

White Grooveless Flare Option -40

Fresnel Lens Option -FR

Many Optional Lenses 100,000 Hour Life

Lamp Vessel (Included) • One vertical QL lamp vessel: 85W (maximum). • See Option -43 for lower wattages. • High efficiency with low operating costs. • Electrode-less induction lamp vessel with power coupler. Extra long 100,000 hour system life. • Flicker-free instant-on, high light output, excellent color rendering (>80 CRI). Constant color. • Indoor or outdoor use. -30oF rated. • 3000oK standard. Add Option -LT for 4000oK. • Resistant to voltage fluctuation and vibration. Generator • Electronic high frequency generator. • 120 volt standard. • For other input voltages, see Option -97. Reflector • Specular Alzak® aluminum. Trim Assembly • Black seamless tapered aluminum one piece OptiGroove with white flange or all white smooth

self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast. Thermal Protection (Per Current NEC) • Thermal protector included.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

Ceiling Cut-out 9¼" Dia.

QRR-08081

QRR-08081 (QL 85W) 90˚ 75˚ 500

60˚

1000 1500 0˚

45˚ 15˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 38.4 21.6 13.8 9.6 7.1 5.4

Dia. 6.4 8.5 10.7 12.8 14.9 17.1

30˚

EFFICIENCY: 45.3% SC 1.1 ITL TEST #50720 LER=34.1 AEC=$7.03

Option -40 Also Shown QRR-11082

QRR-11082 (QL 85W) 90˚ 75˚ 800

60˚

1600 2400 0˚

Option -40 Also Shown

45˚ 15˚

FC 63.0 35.4 22.7 15.8 11.6 8.9

Dia. 5.7 7.6 9.5 11.4 13.2 15.1

30˚

EFFICIENCY: 59.6% ITL TEST #50722

Ceiling Cut-out 12¼" Dia.

Cone of Light* Dist. 6 8 10 12 14 16

SC 0.9 LER=44.8 AEC=$5.35

Options† Generator, Wattage and Voltage -43

Lower wattage. QL 55W. Specify voltage.

-58 277 volt 60 Hz. ballast. -97 Other input voltage. Consult factory.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -17 .187” prismatic high strength acrylic lens.

-20 -26 -32 -40 -45 -46 -79 -82

White aluminum 1/2” cube egg-crate louver. Vandal resistant version. Consult factory. White oversize trim ring. Specify O.D. White grooveless flare trim. (CP x 1.10) Gasket between ceiling and trim flange. Gasket between trim and lens. Extension collar for ceilings up to 2” thick. Sloped ceiling adapter for QRR-08081. Specify slope in 5o increments up to 30o. Not available with Option -26.

-94 Custom color/finish. Specify. Consult factory. -FR Fresnel tempered glass lens. -ML Microprismatic tempered lens.

Other -99 Special modification. Consult factory. -LT

With 4000oK lamp vessel instead of standard 3000oK lamp.

† Additional information and photos are shown on pages 5-7.

Photometric Definitions and Keys begin on page 83.

Alzak® is a registered trademark of ALCOA.

Since 1895

12"

85 WATT MAXIMUM

15"

165 WATT MAXIMUM

QSR-12083 QPR-15084

Surface and Pendant QL Induction Features Lamp Vessel (Included) • One vertical QL lamp vessel: QSR-12083: 85W maximum. QPR-15084: 165W maximum. • See Option -43 for lower wattages. • High efficiency with low operating costs. • Electrode-less induction lamp vessel with power coupler. Extra long 100,000 hour system life. • Flicker-free instant-on, high light output, excellent color rendering (>80 CRI). Constant color. • QPR-15084: Extruded heat sink surrounds lamp base. • Indoor or outdoor use. -30oF rated. • 3000oK standard. Add Option -LT for 4000oK. • Resistant to voltage fluctuation and vibration. Generator • Electronic high frequency generator. • 120 volt standard. • For other input voltages, see Option -97. Reflector • Low iridescence (L.I.) Alzak® aluminum, one piece, self-flanged. Aluminum Housing • Seamless white acrylic enameled. Rustproof:

Exceeds 1000 hour ASTM 5% salt spray test. • Interlocking flare trim. • No visible cylinder hardware. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. Surface Mount Installation - QSR-12083 • Center point mounting for snug fit to ceiling. Mounting hardware included. • QuickConnect mounting available. (Option -QM). • 2” collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) Pendant Mount Installation - QPR-15084 • Pendant mount: 3/8” T.S. x 18”. • For custom length or swivel canopy mount for sloped ceilings, see Options -87, -88. • Indoor or outdoor for covered ceiling use. Also see Option -89. • Bracket mount available. See Options -WB, -89. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Bracket Mount Option -WB

Pendant Mount Option -PM

Desirable for High Ceilings

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* QSR-12083

White Flange Option -31

QPR-15084

QSR-12083 (QL 85W) 90˚ 75˚ 800

60˚

1600 2400 0˚

45˚ 15˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 64.6 36.4 23.3 16.2 11.9 9.1

Dia. 7.6 10.1 12.7 15.2 17.7 20.3

30˚

EFFICIENCY: 77.0% ITL TEST #55051

SC 1.3 LER=48.2 AEC=$4.98

QPR-15084 (QL 165W) 90˚ 75˚

Representative Views:

1750

(Left) With optional pendant mount (QSR-12083 only) (Option -PM)

3500 5250 0˚

(Right) With optional wall bracket (QSR-12083 and QPR-15084) (Option -WB)

Options† Generator, Wattage and Voltage -43

Lower wattage. QSR-12083: QL 55W; QPR-15084: QL 85 or 55W. Specify wattage and voltage.

-58 277 volt 60 Hz. ballast. -97 Other input voltage. Consult factory.

Trims -31 White acrylic enameled reflector flange. -94 Custom color/finish. Specify. Consult factory.

Luminaire (Housing) Finishes -35 Natural aluminum acrylic enamel. -36 Gold acrylic enamel.

60˚ 45˚ 15˚

Mounting -54 Safety cable through pendant stem. 12” longer than specified stem length. Anchored to fixture. Use with -PM. -80 2” collar for mounting beneath surface outlet box (QSR-12083). 1/2” T.S. KO’s. (See p. 7) -87 Custom pendant / wall bracket length. Specify length. -88 Swivel canopy for sloped ceilings up to 40°. Consult factory for higher angles. With -PM. -89 Sealed top WeatherCap. Required for wet

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

30˚

EFFICIENCY: 64.5% ITL TEST #54799

-37 Dark Bronze acrylic enamel. -38 Black acrylic enamel. -94 Custom color/finish. Specify. Consult factory.

Cone of Light* Dist. FC 6 142.9 8 80.4 10 51.5 12 35.7 14 26.3 16 20.1

SC 1.1 LER=47.4 AEC=$5.07

label. QSR-12083: with Options -PM or -WB; QPR-15084: standard or with Option -WB. -PM Pendant mount for QSR-12083. 8” stem or see Option -87. Option -89 required for wet label. -QM QuickConnect mount for indoor (damp or dry) use only for QSR-12083. (See page 7) -WB Wall bracket mount. Option -89 required for wet label.

Other -99 Special modification. Consult factory. -LT

With 4000oK lamp vessel instead of standard 3000oK lamp.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

* Photometric Definitions and Keys begin on page 83. 55

FRS-04085 - Type IC FRS-06086 - Type IC

4" x 4"

1 Triple

42 WATT MAXIMUM

6" x 6"

1 Triple

42 WATT MAXIMUM

Since 1895

Square Type IC Open Dual Reflector Air Tight with Type IC Optional Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Corrugated Option -CG

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflectors • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex aluminum, self-flanged. • See Options for other finishes. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FRS-04085: Type IC

FRS-04085 (1 Triple 42W) 90˚

Ceiling Cut-out 5¼” Sq.

75˚ 200 400

60˚ 45˚

600 0˚

90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 13.6 7.6 4.9 3.4 2.5 1.9

Dia. 7.8 10.4 13.0 15.6 18.2 20.8

0° SC 1.3 15˚ 30˚ 45° SC 1.3 EFFICIENCY: 29.6% 90° SC 1.3 ITL TEST #55406 LER=23.7 AEC=$10.11

FRS-06086: Type IC

FRS-04085 (1 Triple 32W) 75˚ 170

60˚

340

45˚

510 0˚

75˚ 300

Ceiling Cut-out 6¾” Sq.

600 900 0˚

60˚ 45˚

FC 17.8 10.0 6.4 4.5 3.3 2.5

Dia. 8.0 10.7 13.3 16.0 18.7 21.3

0° SC 1.3 15˚ 30˚ 45° SC 1.3 EFFICIENCY: 37.5% 90° SC 1.3 ITL TEST #55408 LER=29.5 AEC=$8.13

FC 12.0 6.8 4.3 3.0 2.2 1.7

Dia. 7.7 10.2 12.8 15.3 17.9 20.5

0° SC 1.3 45° SC 1.3 90° SC 1.3 LER=23.3 AEC=$10.30

FRS-06086 (1 Triple 32W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

30˚

ITL TEST #55407

FRS-06086 (1 Triple 42W) 90˚

15˚

EFFICIENCY: 32.8%

Cone of Light* Dist. 6 8 10 12 14 16

75˚ 250

60˚

500

45˚

750 0˚

15˚

30˚

EFFICIENCY: 39.1% ITL TEST #55409

Cone of Light* Dist. 6 8 10 12 14 16

FC 16.8 9.5 6.1 4.2 3.1 2.4

Dia. 7.6 10.1 12.7 15.2 17.8 20.3

0° SC 1.2 45° SC 1.2 90° SC 1.2 LER=25.9 AEC=$9.26

-73 Internal 1-lamp EM ballast. Specify voltage. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims -30 -31 -32 -45 -57 -71 -77 -79 -90

All white lower trim. (CP x .95) White acrylic enameled lower trim flange. White oversize trim extender. Specify size. Gasket between ceiling and trim flange. SofTex Titanium lower trim. (CP x .80) SofTex Dune lower trim. (CP x .88) SofTex Pewter lower trim. (CP x .85) Extension collar for ceilings up to 2” thick. SofTex Champagne Gold lower trim. (CP x .91)

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

-91 SofTex Wheat lower trim. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -CG Corrugated SofTex Clear lower trim.

Top Access -TA Top access for servicing from above.

Other -99 Special modification. Consult factory. -AT Air tight with Type IC. Meets / exceeds ASTM E283 restricted airflow of 2CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

4" x 4"

1 Triple

32 WATT MAXIMUM

6" x 6"

1 Triple

42 WATT MAXIMUM

FRS-04087 FRS-06088

Shallow Plenum Open Squares Air Tight with Type IC Optional Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Optional Type IC. Approved for direct contact with insulation. See Option -AT. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: FRS-04087: 32/26W triple. FRS-06088: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflectors • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex aluminum, self-flanged. • See Options for other finishes.

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Corrugated Option -CG

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRS-04087 (1 Triple 32W)

FRS-04087: Type IC

90˚ 75˚

Ceiling Cut-out 5¼” Sq.

200 400

60˚ 45˚

600 0˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 14.7 8.3 5.3 3.7 2.7 2.1

Dia. 6.4 8.5 10.7 12.8 14.9 17.0

0° SC 1.0 15˚ 30˚ 90° SC 1.2 EFFICIENCY: 32.0% 180° SC 0.8 ITL TEST #54882 LER=17.8 AEC=$13.47

90˚ 75˚ 350

Ceiling Cut-out 6¾” Sq.

700 1050 0˚

60˚ 45˚

Dist. 6 8 10 12 14 16

Trims -30 -31 -32 -45 -57 -71 -77 -79 -90

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

90˚

Cone of Light* FC 21.7 12.2 7.8 5.4 4.0 3.1

Dia. 7.4 9.9 12.4 14.9 17.4 19.9

0° SC 1.0 15˚ 30˚ 90° SC 1.3 EFFICIENCY: 44.9% 180° SC 1.1 ITL TEST #54885 LER=33.1 AEC=$7.26

Options†

FRS-06088 (1 Triple 32W)

FRS-06088 (1 Triple 42W)

FRS-06088: Type IC

75˚ 250 500 750 0˚

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 16.3 9.2 5.9 4.1 3.0 2.3

Dia. 7.4 9.9 12.4 14.8 17.3 19.8

0° SC 1.1 15˚ 30˚ 90° SC 1.3 EFFICIENCY: 44.4% 180° SC 0.9 ITL TEST #55295 LER=28.5 AEC=$8.41

-94 Custom color/finish. Specify. Consult factory. -CG Corrugated SofTex Clear lower trim.

ShatterGuard™ Shield (Beneath Lamp) -17 .187” prismatic high strength acrylic. -ML MicroLux tempered mircroprismatic lens. -SG .125” clear polycarbonate.

Other -99 Special modification. Consult factory. -AT Air tight with Type IC in 9-1/2” housing. Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRS-06089 FRS-09090

6" x 6"

2 Triple

32 WATT MAXIMUM

9" x 9"

2 Triple

57 WATT MAXIMUM

Since 1895

Open Squares with High Lumen Output Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Corrugated Option -CG

Lamp • Designed for two 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FRS-06089: 32/26W triple. FRS-09090: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRS-06089: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex aluminum, self-flanged. • See Options for other finishes.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRS-06089 (2 Triple 32W) FRS-06089

90˚ 75˚

Ceiling Cut-out 6¾” Sq.

400

60˚

800 1200 0˚

45˚

Dist. 6 8 10 12 14 16

FC 29.5 16.6 10.6 7.4 5.4 4.1

Dia. 6.8 9.1 11.4 13.7 16.0 18.2

0° SC 1.0 45° SC 1.2 EFFICIENCY: 33.3% 90° SC 1.3 ITL TEST #54886 LER=19.9 AEC=$12.08

15˚

FRS-06089 (2 Triple 26W) 90˚

Cone of Light*

30˚

75˚ 300 600

90˚ 75˚ 700

60˚

1400

Ceiling Cut-out 9½” Sq.

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRS-06089: for 4-pin 2x18W triple or 2x18-13W quad; FRS-09090: for 4-pin 2x42/32/26W triple or 2x26W quad (multi-wattage/voltage). Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

2100 0˚

45˚

15˚

Dist. 6 8 10 12 14 16

FC 55.6 31.3 20.0 13.9 10.2 7.8

Dia. 6.6 8.8 11.0 13.1 15.3 17.5

30˚

EFFICIENCY: 35.3% ITL TEST #54887

FC 22.5 12.6 8.1 5.6 4.1 3.2

Dia. 7.1 9.4 11.8 14.2 16.5 18.9

0° SC 1.0 45° SC 1.2 90° SC 1.3 LER=21.5 AEC=$11.16

FRS-09090-43 (2 Triple 42W) 90˚

Cone of Light*

0° SC 1.0 45° SC 1.1 EFFICIENCY: 37.5% 90° SC 1.2 ITL TEST #54890 LER=28.2 AEC=$8.53

15˚

45˚

900 0˚

FRS-09090 (2 Triple 57W)

FRS-09090

60˚

Cone of Light* Dist. 6 8 10 12 14 16

75˚ 650

60˚

1300

45˚

1950 0˚

15˚

30˚

EFFICIENCY: 40.8% ITL TEST #54891

Cone of Light* Dist. 6 8 10 12 14 16

FC 51.0 28.7 18.4 12.8 9.4 7.2

Dia. 6.3 8.4 10.5 12.6 14.7 16.8

0° SC 0.9 45° SC 1.0 90° SC 1.1 LER=30.4 AEC=$7.88

-73 Internal 1-lamp EM ballast. Specify voltage. -74 Internal 2-lamp EM ballast. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

ShatterGuard™ Shield (Beneath Lamp)

Trims

Top Access

-17 .187” prismatic high strength acrylic for FRS-06089. -ML MicroLux tempered microprismatic lens for FRS-06089. -SG .125” clear polycarbonate for FRS-06089.

All white lower trim. (CP x .95) -TA Top access for servicing from above. White acrylic enameled lower trim flange. (FRS-09090 only) White oversize trim extender. Specify size. Other Gasket between ceiling and trim flange. -99 Special modification. Consult factory. SofTex Titanium lower trim. (CP x .80) -FD Two additional in-line fuses. One per ballast. SofTex Dune lower trim. (CP x .88) Use with Option -84. SofTex Pewter lower trim. (CP x .85) -FS Additional in-line fuse. Extension collar for ceilings up to 2” thick. Emergency Ballast - Specify Voltage1 -LE With 4-pin electronic lamp. 3500°K standard. SofTex Champagne Gold lower trim. Internal (factory installed) ballast, test switch and 82 CRI and 12,000 hour life. Specify wattage, (CP x .91) indicator light. Suitable for damp locations from style and color temperature. -91 SofTex Wheat lower trim. (CP x .87) 0° to 50°C (32° to 122°F) or with Cold Weather -94 Custom color/finish. Specify. Consult factory. version (see -CE) -20° to 55°C (-4° to 131°F). -CG Corrugated SofTex Clear lower trim for to 55°C (-4° to 131°F). FRS-06089. 1 Visit www.kirlinlighting.com for most current performance / specifications. † Additional information and photos are shown on pages 5-7.

-30 -31 -32 -45 -57 -71 -77 -79 -90

* Photometric Definitions and Keys begin on page 83.

Alzak® is a registered trademark of ALCOA.

Since 1895

9" x 9"

2 Triple

FRS-09091

42 WATT MAXIMUM

Square X-CELL™ in Shallow Housing Features Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • Upper: Full size, highly reflective white finish. • Lower: Low iridescence (L.I.) semi-specular Alzak® aluminum cone and 4-cell parabolic cross baffle, self-flanged. • See Options for other finishes.

White Option -30

White Flange Option -31

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRS-09091 (2 Triple 42W) 90˚ 75˚ 600

60˚

1200

FRS-09091

1800 0˚

45˚ 15˚

30˚

EFFICIENCY: 46.0% ITL TEST #45272

Cone of Light* Dist. 6 8 10 12 14 16

FC 45.0 25.3 16.2 11.3 8.3 6.3

Dia. 6.8 9.1 11.4 13.7 16.0 18.3

0° SC 1.3 45° SC 1.2 90° SC 1.1 LER=28.4 AEC=$8.45

FRS-09091 (2 Quad 26W) 90˚ 75˚ 300

Ceiling Cut-out 9¾” Sq.

60˚

600 900 0˚

45˚ 15˚

30˚

EFFICIENCY: 43.2% ITL TEST #42080

Cone of Light* Dist. 6 8 10 12 14 16

FC 15.8 8.9 5.7 4.0 2.9 2.2

Dia. 9.2 12.3 15.4 18.5 21.5 24.6

0° SC 1.2 90° SC 1.6 180° SC 1.4 LER=23.2 AEC=$10.36

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory. 1

Emergency Ballast - Specify Voltage

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from

Lenses and Trims -12 -15 -28 -30 -31

Prismatic acrylic above 1/4” polycarbonate. Prismatic C#73 flat glass lens. UV absorbing clear tempered glass lens. All white cross baffle. (CP x .95) White flange (only) on cross baffle.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

-32 White oversize trim extender. Specify size. -45 Gasket between ceiling and cross baffle flange. -79 Extension collar for ceilings up to 2” thick. -94 Custom color/finish. Specify. Consult factory.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 59

FRT-04092 FRT-06093

4" x 8"

1 Triple

57 WATT MAXIMUM

6" x 11"

1 Triple

70 WATT MAXIMUM

Since 1895

Open Appearance Rectangles • MicroLux tempered microprismatic lens mounted above trim. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Corrugated Option -CG

Lamp • Designed for one 4-pin triple/four tube amalgam compact fluorescent lamp: FRT-04092: 57W triple/four tube. FRT-06093: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflectors • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex aluminum, self-flanged. • See Options for other finishes.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FRT-04092

FRT-04092-43 (1 Triple 42W)

FRT-04092 (1 Triple 57W)

Ceiling Cut-out 5¼” x 9½”

90˚ 75˚ 350 700

60˚ 45˚

1050 0˚

Dist. 6 8 10 12 14 16

FC 26.0 14.6 9.4 6.5 4.8 3.7

Dia. 6.9 9.2 11.5 13.8 16.2 18.5

0° SC 1.1 15˚ 30˚ 90° SC 1.1 180° SC 1.3 EFFICIENCY: 36.4% ITL TEST #55735 LER=25.8 AEC=$9.29

FRT-06093

90˚

Cone of Light*

75˚ 300

60˚

600 900 0˚

45˚ 15˚

30˚

EFFICIENCY: 43.0% ITL TEST #55734

Cone of Light* Dist. 6 8 10 12 14 16

FC 23.8 13.4 8.6 6.0 4.4 3.3

Dia. 6.8 9.1 11.3 13.6 15.9 18.1

0° SC 1.2 90° SC 1.0 180° SC 1.2 LER=31.9 AEC=$7.52

FRT-06093 (1 Triple 70W) 90˚ 75˚ 400 800 1200 0˚

Ceiling Cut-out 63/4” x 121/8”

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 30.4 17.1 10.9 7.6 5.6 4.3

Dia. 7.4 9.9 12.3 14.8 17.2 19.7

0° SC 1.3 15˚ 30˚ 90° SC 1.2 EFFICIENCY: 37.1% 180° SC 1.1 ITL TEST #55427 LER=26.2 AEC=$9.15

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRT-04092: for 4-pin 42/32/26W triple or 26W quad (multiwattage/voltage); FRT-06093: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and

indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-77 SofTex Pewter lower trim. (CP x .85) -79 Extension collar for ceilings up to 2” thick. -90 SofTex Champagne Gold lower trim. (CP x .91) -91 SofTex Wheat lower trim. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -CG Corrugated SofTex Clear lower trim.

Lenses and Trims

-99 Special modification. Consult factory. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

-30 -31 -32 -45 -57 -71

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

Other

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

6" x 11"

2 Triple

FRT-06094

42 WATT MAXIMUM

2 x 42 Open Appearance Rectangle Features Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex aluminum, self-flanged. • See Options for other finishes. • MicroLux tempered microprismatic lens mounted above trim.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Corrugated Option -CG

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRT-06094

FRT-06094 (2 Triple 42W) 90˚ 75˚ 550

60˚

1100 1650 0˚

45˚ 15˚

30˚

EFFICIENCY: 41.4% ITL TEST #55419

Cone of Light* Dist. 6 8 10 12 14 16

FC 44.5 25.0 16.0 11.1 8.2 6.3

Dia. 7.0 9.3 11.6 14.0 16.3 18.6

0° SC 1.1 45° SC 1.1 90° SC 1.1 LER=32.4 AEC=$7.40

Ceiling Cut-out 63/4” x 121/8”

Options† Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-90 SofTex Champagne Gold lower trim. (CP x .91) -91 SofTex Wheat lower trim. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -CG Corrugated SofTex Clear lower trim.

Lenses and Trims

-30 -31 -32 -45 -57 -71 -77 -79

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Other

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 61

FRS-04095 FRS-06096

4" x 4"

1 Triple

42 WATT MAXIMUM

6" x 6"

1 Triple

42 WATT MAXIMUM

Since 1895

Square Lensed Wall Washes: Air Tight with Type IC Optional Aluminum Housing: Shallow Plenum • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Optional Type IC. Approved for direct contact with insulation. See Option -AT. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Trim Assembly • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex aluminum, self-flanged. • MicroLux tempered microprismatic lens.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

90˚

SINGLE FIXTURE 1' 2' 3'

75˚

FRS-04095 (1 Triple 42W)

250

Ceiling Cut-out 5¼” Sq.

500

60˚ 45˚

750 0˚

15˚

WALL >

30˚ 0° 90° 180°

DISTANCE FROM CEILING IN FEET

FRS-04095

EFFICIENCY: 26.0%

MULTIPLE FIXTURES 3' CENTERS 4' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

4.9 3.3 12.6 9.8 14.0 12.4 11.7 10.9 8.9 8.3 6.5 6.3 4.9 4.7 3.7 3.8 2.9 2.9

1.6 4.6 7.4 7.7 6.6 5.3 4.1 3.4 2.7

0.6 1.6 3.1 4.2 4.2 3.8 3.3 2.7 2.3

0.4 0.7 1.3 2.0 2.4 2.5 2.4 2.1 1.9

6.8 16.6 21.3 21.3 19.1 16.2 13.7 11.7 10.4

5.9 16.2 22.5 22.5 19.7 16.5 13.9 11.8 9.9

ITL TEST #55421

FRS-06096

90˚

SINGLE FIXTURE 1' 2' 3'

250

60˚

500

FRS-06096 (1 Triple 42W) Ceiling Cut-out 6¾” Sq.

45˚

750 0˚ WALL >

15˚

30˚ 0° 90° 180°

EFFICIENCY: 34.4%

DISTANCE FROM CEILING IN FEET

75˚

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 1

6.6 13.6 17.2 16.3 14.5 12.5 10.7 9.3 8.0

4.5 10.5 15.9 16.7 15.0 12.8 10.8 9.2 7.5

6.6 13.6 17.2 16.3 14.5 12.5 10.7 9.3 8.0

LER=20.7 AEC=$11.57

MULTIPLE FIXTURES 3' CENTERS 4' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

9.3 6.3 17.3 13.4 15.1 13.3 11.5 11.0 8.6 8.3 6.4 6.3 4.8 4.7 3.8 3.9 2.9 3.0

2.9 6.8 8.6 8.3 7.0 5.7 4.4 3.6 2.9

1.0 2.6 4.1 5.0 4.8 4.3 3.7 3.1 2.6

0.6 1.1 1.8 2.6 2.9 3.0 2.8 2.4 2.3

12.0 23.1 24.8 23.2 20.7 17.7 15.2 13.2 11.8

10.4 22.4 25.7 24.2 21.3 18.1 15.5 13.3 11.3

ITL TEST #54893

Options†

6.8 16.6 21.3 21.3 19.1 16.2 13.7 11.7 10.4

12.0 23.1 24.8 23.2 20.7 17.7 15.2 13.2 11.8

10.8 18.4 19.6 17.7 15.8 13.7 11.9 10.6 9.2

7.5 14.7 18.7 18.4 16.5 14.2 12.2 10.5 8.7

10.8 18.4 19.6 17.7 15.8 13.7 11.9 10.6 9.2

LER=27.8 AEC=$8.62

0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-77 SofTex Pewter lower trim. (CP x .85) -90 SofTex Champagne Gold lower trim. (CP x .91) -91 SofTex Wheat lower trim. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -CG Corrugated SofTex Clear lower trim.

Lenses and Trims

-99 Special modification. Consult factory. -AT Air tight with Type IC in 9-1/2” housing. Meets / exceeds ASTM E283 restricted airflow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

-30 -31 -32 -45 -57 -71

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

Other

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

4" x 8"

1 Triple

57 WATT MAXIMUM

6" x 11"

1 Triple

70 WATT MAXIMUM

FRT-04097 FRT-06098

Rectangular Lensed Wall Washes Features

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple/four tube amalgam compact fluorescent lamp: FRT-04097: 57W triple/four tube. FRT-06098: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Trim Assembly • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex aluminum, self-flanged. • MicroLux tempered microprismatic lens.

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRT-04097 (1 Triple 57W)

Ceiling Cut-out 5¼” x 9½”

90˚

FRT-04097

SINGLE FIXTURE 1' 2' 3'

400

60˚

800 1200 0˚

45˚ 15˚

WALL >

30˚ 0° 90° 180°

DISTANCE FROM CEILING IN FEET

75˚

EFFICIENCY: 47.5%

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

12.2 28.6 28.3 21.0 14.7 10.5 7.8 6.1 4.7

9.4 23.9 25.5 19.8 13.9 10.2 7.5 6.1 47.

5.4 2.4 14.3 6.7 18.1 10.4 15.8 10.8 12.0 9.0 9.2 7.4 6.8 6.0 5.6 4.9 4.5 4.2

1.3 3.1 5.3 6.5 6.2 5.7 4.8 4.1 3.7

18.9 44.7 52.7 47.4 39.3 31.8 26.4 22.4 19.8

18.0 44.8 53.8 48.1 39.7 32.2 26.7 22.6 18.9

ITL TEST #55416

18.9 44.7 52.7 47.4 39.3 31.8 26.4 22.4 19.8

17.5 34.5 40.9 36.3 30.4 25.1 21.2 18.5 15.9

14.5 31.0 40.2 36.8 30.8 25.4 21.3 18.2 14.9

17.5 34.5 40.9 36.3 30.4 25.1 21.2 18.5 15.9

LER=29.4 AEC=$8.17

FRT-06098 (1 Triple 70W) FRT-06098

90˚

SINGLE FIXTURE 1' 2' 3'

400

60˚

800 1200 0˚ WALL >

Ceiling Cut-out 63/4” x 121/8”

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRT-04097: for 4-pin 42/32/26W triple or 26W quad (multiwattage/voltage); FRT-06098: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

15˚

30˚ 0° 90° 180°

EFFICIENCY: 40.8%

Lenses and Trims -30 -31 -32 -45

All white lower trim. (CP x .95) White acrylic enameled lower trim flange. White oversize trim extender. Specify size. Gasket between ceiling and trim flange.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

45˚

DISTANCE FROM CEILING IN FEET

75˚

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

16.9 33.6 30.8 22.0 14.9 10.2 7.4 5.7 4.4

13.8 29.7 29.1 21.4 14.4 10.2 7.3 5.8 4.5

8.1 19.0 21.8 17.6 12.6 9.3 6.7 5.5 4.3

3.7 9.5 13.4 12.7 9.7 7.7 6.0 4.8 4.0

1.9 4.4 7.0 7.9 6.9 6.0 4.9 4.1 3.6

25.7 54.7 60.1 50.7 40.1 31.4 25.4 21.1 18.5

24.5 54.9 60.9 51.3 40.5 31.7 25.8 21.4 17.7

ITL TEST #55418

25.7 54.7 60.1 50.7 40.1 31.4 25.4 21.1 18.5

22.9 41.4 46.2 39.1 31.3 24.9 20.5 17.5 14.9

19.3 38.2 45.9 39.1 31.2 25.1 20.6 17.3 14.0

22.9 41.4 46.2 39.1 31.3 24.9 20.5 17.5 14.9

LER=28.3 AEC=$8.47

-57 -71 -77 -90

SofTex Titanium lower trim. (CP x .80) SofTex Dune lower trim. (CP x .88) SofTex Pewter lower trim. (CP x .85) SofTex Champagne Gold lower trim. (CP x .91) -91 SofTex Wheat lower trim. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -CG Corrugated SofTex Clear lower trim.

† Additional information and photos are shown on pages 5-7.

*Photometric Definitions and Keys begin on page 83.

FRS-06099 FRT-06100

6" x 6"

2 Triple

32 WATT MAXIMUM

6" x 11"

2 Triple

42 WATT MAXIMUM

Since 1895

High Output Square and Rectangular Lensed Wall Washes Trim Assembly • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex aluminum, self-flanged. • Microlux tempered clear glass lens. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: FRS-06099: 32/36W triple or 26W quad. FRT-06100: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD.

SofTex Wheat Option -91

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRS-06099 (2 Triple 32W) 90˚ 75˚ 400

60˚

800 1200 0˚

45˚ 15˚

WALL >

30˚ 0° 90° 180°

SINGLE FIXTURE 1' 2' 3' DISTANCE FROM CEILING IN FEET

Ceiling Cut-out 6½” Sq.

FRS-06099

1 2 3 4 5 6 7 8 9

13.7 30.8 30.4 22.6 15.5 10.8 7.8 6.0 4.6

9.8 24.4 26.2 20.5 14.1 10.2 7.4 5.9 4.6

5.0 13.1 17.0 15.2 11.5 8.8 6.5 5.3 4.3

1.9 5.5 8.8 9.6 8.1 6.8 5.5 4.4 3.8

1.0 2.3 4.1 5.3 5.3 5.0 4.3 3.6 3.2

18.9 43.5 50.5 44.9 36.7 29.3 24.1 20.3 17.9

17.2 42.2 50.7 45.3 36.9 29.5 24.4 20.5 17.1

ITL TEST #54894

18.9 43.5 50.5 44.9 36.7 29.3 24.1 20.3 17.9

17.8 34.1 39.7 34.6 28.4 23.1 19.2 16.5 14.1

13.3 28.3 37.0 34.1 28.3 23.1 19.1 16.2 13.2

17.8 34.1 39.7 34.6 28.4 23.1 19.2 16.5 14.1

LER=23.6 AEC=$10.16

FRT-06100 (2 Triple 42W)

FRT-06100

SINGLE FIXTURE 1' 2' 3'

75˚ 600

60˚

1200 1800 0˚ WALL >

Ceiling Cut-out 63/4” x 121/8”

45˚ 15˚

30˚ 0° 90° 180°

DISTANCE FROM CEILING IN FEET

90˚

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from

0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast. Specify voltage. -74 Internal 2-lamp EM ballast. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Trims -30 -31 -32 -45 -57 -71

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

19.4 41.8 40.4 29.4 20.2 14.3 10.7 8.5 6.6

15.0 34.7 36.0 27.3 18.8 13.8 10.3 8.5 6.7

8.7 20.9 25.5 21.6 16.0 12.2 9.2 7.7 6.3

4.0 10.2 15.0 15.0 12.1 9.9 8.0 6.6 5.7

2.2 4.8 7.8 9.3 8.6 7.7 6.5 5.5 5.0

30.2 66.4 75.8 66.3 53.9 43.6 36.3 31.0 27.5

28.6 65.8 76.6 67.0 54.4 44.1 36.9 31.3 26.3

ITL TEST #55420

EFFICIENCY: 47.8%

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

EFFICIENCY: 38.5%

-77 -90 -91 -94 -CG

30.2 66.4 75.8 66.3 53.9 43.6 36.3 31.0 27.5

27.4 51.0 58.9 51.1 42.1 34.6 29.2 25.5 22.0

22.6 45.7 57.3 51.0 42.1 34.8 29.3 25.2 20.7

27.4 51.0 58.9 51.1 42.1 34.6 29.2 25.5 22.0

LER=36.3 AEC=$6.61

SofTex Pewter lower trim. (CP x .85) SofTex Champagne Gold lower trim. (CP x .91) SofTex Wheat lower trim. (CP x .87) Custom color/finish. Specify. Consult factory. Corrugated SofTex Clear lower trim.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

6" x 6"

1 Triple

32 WATT MAXIMUM

8" x 8"

1 Triple

42 WATT MAXIMUM

Type IC - FRS-06101 Type IC - FRS-08102

Type IC Square Regressed Lens Downlights Air Tight Optional Features Lamp • Designed for one 4-pin triple tube amalgam compact fluorescent lamp: FRS-06101: 32/26W triple. FRS-08102: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum black OptiGroove with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens.

Performance at a Glance*

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. • Air Tight design. See Option -AT. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC (non-dimming). Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

White Grooveless Flare Option -40

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets FRS-06101 (1 Triple 32W)

FRS-06101: Type IC

90˚ 75˚ 200

Ceiling Cut-out 6¾” Sq.

60˚

400 600 0˚

45˚ 15˚

30˚

EFFICIENCY: 36.7% ITL TEST #45275

Option -40 Also Shown

Cone of Light* Dist. 6 8 10 12 14 16

FC 16.0 9.0 5.8 4.0 2.9 2.3

Dia. 6.1 8.1 10.2 12.2 14.2 16.3

0° SC 1.1 90° SC 1.1 180° SC 0.9 LER=22.7 AEC=$10.57

FRS-08102 (1 Triple 42W) FRS-08102: Type IC

90˚ 75˚ 300

60˚

600

Ceiling Cut-out 8½” Sq.

900 0˚

30˚

FC 22.7 12.8 8.2 5.7 4.2 3.2

Dia. 6.4 8.6 10.7 12.9 15.0 17.1

0° SC 1.2 90° SC 1.1 180° SC 1.0 LER=25.4 AEC=$9.43

-46 -79 -94 -CF -UV

Lenses and Trims

Other

-13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -17 .187” prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate diffuser. -32 White oversize trim extender. Specify size. -40 White grooveless flare trim. (CP x 1.10) -45 Gasket between ceiling and trim flange.

-99 Special modification. Consult factory. -AT Air tight with Type IC. Meets / exceeds ASTM E283 restricted airlfow of 2 CFM maximum. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

15˚

EFFICIENCY: 42.4% ITL TEST #45276

Option -40 Also Shown

Options†

45˚

Cone of Light* Dist. 6 8 10 12 14 16

Gasket between trim and lens. Extension collar for ceilings up to 2” thick. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. UV filter. Consult factory.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRS-06103 FRS-08104

6" x 6"

1 Triple

42 WATT MAXIMUM

8" x 8"

1 Triple

57 WATT MAXIMUM

Since 1895

Shallow Square Regressed Lens Downlights Features

White Grooveless Flare Option -40

(Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple/four tube amalgam or quad compact fluorescent lamp: FRS-06103: 42/32/26W triple or 26W quad. FRS-08104: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRS-06103: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum black OptiGroove with white flange or all white smooth self-flanged trim

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRS-06103 (1 Triple 42W)

FRS-06103

90˚

Ceiling Cut-out 6¾” Sq.

75˚ 300

60˚

600 900 0˚

45˚ 15˚

30˚

EFFICIENCY: 33.9% ITL TEST #55422

Option -40 Also Shown

90˚ 75˚ 500

1500 0˚

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or

45˚ 15˚

30˚

EFFICIENCY: 50.5% ITL TEST #55423

Option -40 Also Shown

-39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRS-06103: for 4-pin 1 8W triple or 18-13W quad; FRS-08104: for 4-pin 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

60˚

1000

Ceiling Cut-out 8½” Sq.

Ballast, Wattage and Voltage

FC 21.3 12.0 7.7 5.3 3.9 3.0

Dia. 6.2 8.2 10.3 12.4 14.4 16.5

0° SC 1.0 90° SC 1.0 180° SC 1.0 LER=26.5 AEC=$9.07

FRS-08104 (1 Triple 57W)

FRS-08104

Options†

Cone of Light* Dist. 6 8 10 12 14 16

with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FRS-06103. -75 Remote 1-lamp EM ballast for FRS-08104. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRS-06103. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRS-08104. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRS-06103. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRS-08104. 13-42W only.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -17 .187” prismatic high strength acrylic lens. -18 Opal flat glass diffuser.

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

-20 -21 -32 -40 -45 -46 -79 -94 -CF -UV

Cone of Light* Dist. 6 8 10 12 14 16

FC 37.0 20.8 13.3 9.3 6.8 5.2

Dia. 6.6 8.8 11.1 13.3 15.5 17.7

0° SC 1.2 90° SC 1.1 180° SC 1.1 LER=31.9 AEC=$7.52

White aluminum 1/2” cube egg-crate louver. White flat polycarbonate diffuser. White oversize trim extender. Specify size. White grooveless flare trim. (CP x 1.10) Gasket between ceiling and trim flange. Gasket between trim and lens. Extension collar for ceilings up to 2” thick. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. UV filter. Consult factory.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

9" x 9"

2 Triple

42 WATT MAXIMUM

11" x 11"

2 Triple

57 WATT MAXIMUM

FRS-09105 FRS-11106

2 Lamp Square Regressed Lens Downlights Features Lamp • Designed for two 4-pin triple/four tube amalgam compact fluorescent lamps: FRS-09105: 42/32/26W triple or 26W quad. FRS-11106: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRS-09105: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum black OptiGroove with white flange or all white smooth self-flanged trim

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* Ceiling Cut-out 9½” Sq.

FRS-09105 (2 Triple 32W)

FRS-09105 (2 Triple 42W)

FRS-09105

90˚ 75˚ 550

60˚

1100 1650 0˚

45˚ 15˚

30˚

EFFICIENCY: 37.5% ITL TEST #55738

Option -40 Also Shown

90˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 42.4 23.8 15.3 10.6 7.8 6.0

Dia. 6.9 9.2 11.4 13.7 16.0 18.3

0° SC 1.1 45° SC 1.2 90° SC 1.2 LER=26.3 AEC=$9.12

75˚ 450

90˚ 75˚ 800

60˚

1600 2400 0˚

Ceiling Cut-out 12¼” Sq.

45˚ 15˚

30˚

EFFICIENCY: 39.6% ITL TEST #55736

60˚

900

45˚

1350 0˚

15˚

ITL TEST #45277

FC 64.3 36.2 23.1 16.1 11.8 9.0

Cone of Light* Dist. 6 8 10 12 14 16

FC 33.9 19.1 12.2 8.5 6.2 4.8

Dia. 6.4 8.5 10.7 12.8 14.9 17.1

0° SC 1.1 45° SC 1.2 90° SC 1.2 LER=43.2 AEC=$5.56

FRS-11106-43 (2 Triple 42W) 90˚

Cone of Light* Dist. 6 8 10 12 14 16

30˚

EFFICIENCY: 42.1%

FRS-11106 (2 Triple 57W)

FRS-11106

Option -40 Also Shown

White Grooveless Flare Option -40

Dia. 6.4 8.5 10.6 12.7 14.8 17.0

0° SC 1.0 45° SC 1.1 90° SC 1.1 LER=26.0 AEC=$9.25

75˚ 700

60˚

1400 2100 0˚

45˚ 15˚

30˚

EFFICIENCY: 51.0% ITL TEST #45278

Cone of Light* Dist. 6 8 10 12 14 16

FC 57.5 32.3 20.7 14.4 10.6 8.1

Dia. 6.2 8.3 10.3 12.4 14.5 16.6

0° SC 1.0 45° SC 1.1 90° SC 1.1 LER=57.6 AEC=$4.17

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRS-09105: for 4-pin 2x18W triple or 2x18-13W quad; FRS-11106: for 4-pin 2x42/32/26W triple or 2x26W quad (multi-wattage/voltage). Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-79 -94 -CF -FR -UV

Lenses and Trims

-13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -17 .187” prismatic high strength acrylic lens for FRS-09105. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate for FRS-09105. -32 White oversize trim extender. Specify size. -40 White grooveless flare trim. (CP x 1.10) -45 Gasket between ceiling and trim flange. -46 Gasket between trim and lens.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Extension collar for ceilings up to 2” thick. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. Fresnel tempered glass lens. UV filter. Consult factory.

Other

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 67

FRS-08107 - Type IC

8" x 8"

1 Triple

Since 1895

42 WATT MAXIMUM

Type IC “K” Lens with Exceptional Efficiency Features

Tempered Prismatic C#73 Lens Option -15

Shallow 6¼” Depth

• Attractively beveled cast aluminum frame tooled to ensure close fit with door. White acrylic finish. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Type IC (non-dimming). Approved for direct contact with insulation. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • GlasSurfaced™ multi-faceted specular aluminum. Trim Assembly • Shock-resisting, UV absorbing prismatic convex widespread Kirlin lens. See Options for others. • Rustfree polished nickel stainless door (304-L) and captive thumb screw. Concealed hinges for fast relamping.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRS-08107 (1 Triple 42W) 90˚ 75˚ 300

FRS-08107: Type IC

60˚

600

45˚

900 0˚

15˚

30˚

EFFICIENCY: 64.3% ITL TEST #45273

Cone of Light* Dist. 6 8 10 12 14 16

FC 22.6 12.7 8.1 5.6 4.1 3.2

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

0° SC 1.2 90° SC 1.2 180° SC 1.0 LER=37.7 AEC=$6.36

FRS-08107 (1 Triple 32W) 0

90˚ 75˚

210

Ceiling Cut-out 9½” Sq.

60˚

420

45˚

630

EFFICIENCY: 62.8% ITL TEST #42484

Cone of Light* Dist. 6 8 10 12 14 16

FC 16.6 9.3 6.0 4.1 3.0 2.3

Dia. 6.5 8.7 10.8 13.0 15.2 17.4

0° SC 1.0 90° SC 1.2 180° SC 1.1 LER=36.7 AEC=$6.55

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -14 Drop opal glass diffuser. -15 Prismatic C#73 tempered glass lens. -17 .187” prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate diffuser. -26 Tamper-resistant button head recessed hex screw with center pin and 1 key / 10 fixtures. -32 White oversize trim extender. Specify size.

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

-45 -46 -94 -CF

Gasket between ceiling and trim flange. Gasket between trim and lens. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. For use with Options -13, -15, -17, -18, -21. -DG Drop Guard with tempered prismatic C#73 glass lens. -UV UV filter. For use with Options -13, -15, -17, -18, -21. Consult factory.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

10" x 10"

2 Triple

42 WATT MAXIMUM

10" x 10"

2 Triple

57 WATT MAXIMUM

FRS-10108 FRS-10109

Versatile 2 Lamp “K” Lens Downlights Features Lamp • Designed for two 4-pin triple/four tube amalgam compact fluorescent lamps: FRS-10108: 42/32/26W triple or 26W quad. FRS-10109: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FRS-10108: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • GlasSurfaced™ multi-faceted specular aluminum. Trim Assembly • Shock-resisting, UV absorbing prismatic convex widespread Kirlin lens. See Options for others. • Rustfree polished nickel stainless door (304-L)

and captive thumb screw. Concealed hinges for fast relamping. • Attractively beveled cast aluminum frame tooled to ensure close fit with door. White acrylic finish. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. (FRS-10109) Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FRS-10108

90˚ 75˚

600 1200

60˚ 45˚

1800 0˚ 15˚ 30˚ EFFICIENCY: 61.8%

ITL TEST #45274

Cone of Light* Dist. 6 8 10 12 14 16

FC 46.9 26.4 16.9 11.7 8.6 6.6

Dia. 6.4 8.5 10.6 12.8 14.9 17.0

0° SC 1.1 45° SC 1.2 90° SC 1.2 LER=37.2 AEC=$6.36

90˚ 75˚

450 900

60˚ 45˚

1350 0˚ 15˚ 30˚ EFFICIENCY: 64.0%

ITL TEST #42486

Cone of Light* Dist. 6 8 10 12 14 16

FC 36.0 20.3 13.0 9.0 6.6 5.1

Dia. 6.3 8.4 10.5 12.6 14.7 16.8

0° SC 1.0 45° SC 1.1 90° SC 1.2 LER=37.1 AEC=$6.48

FRS-10109 (2 Triple 57W)

FRS-10109 0

90˚ 75˚

700 1400

60˚ 45˚

2100

Ceiling Cut-out 12¼” Sq.

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRS-10108: for 4-pin 2x18W triple or 2x18-13W quad; FRS-10109: for 4-pin 2x42/32/26W triple or 2x26W quad (multi-wattage/voltage). Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

EFFICIENCY: 56.5% ITL TEST #55739

Cone of Light* Dist. 6 8 10 12 14 16

FC 57.0 32.1 20.5 14.3 10.5 8.0

Dia. 6.9 9.2 11.4 13.7 16.0 18.3

0° SC 1.1 45° SC 1.1 90° SC 1.1 LER=36.3 AEC=$6.61

-74 Internal 2-lamp EM ballast for FRS-10109. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -14 Drop opal glass diffuser. -15 Prismatic C#73 tempered glass lens. -17 .187” prismatic high strength acrylic lens for FRS-10108. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat poly diffuser for FRS-10108. -26 Tamper-resistant button head recessed hex screw with center pin and 1 key / 10 fixtures. -32 White oversize trim extender. Specify size. -45 Gasket between ceiling and trim flange.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

FRS-10108 (2 Triple 32W)

FRS-10108 (2 Triple 42W)

Ceiling Cut-out 12¼” Sq. 0

Tempered Prismatic C#73 Lens Option -15

-46 Gasket between trim and lens. -94 Custom color/finish. Specify. Consult factory. -CF High temperature color filter. Specify color. For use with Options -13, -15, -17, -18, -21. -DG Drop Guard with C#73 tempered lens. -DH Drop Holophane tempered lens. -UV UV filter. For use with Options -13, -15, -17, -18, -21. Consult factory.

Other -47 Wet plaster frame for wet plaster ceiling for FRS-10108. -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83. 69

FRS-12110

12" x 12" 3 Triple

Since 1895

32 WATT MAXIMUM

3-Lamp High Wattage “K” Lens Downlight Two Circuit Wiring Optional Features Lamp • Designed for three 4-pin triple tube amalgam compact fluorescent lamps: 32/26W triple. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • GlasSurfaced™ multi-faceted specular aluminum. Trim Assembly • Shock-resisting, UV absorbing prismatic convex widespread Kirlin lens. See Options for others. • Rustfree polished nickel stainless door (304-L) and captive thumb screw. Concealed hinges for fast relamping.

Tempered Prismatic C#73 Lens Option -15

• Attractively beveled cast aluminum frame tooled to ensure close fit with door. White acrylic finish. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FRS-12110 (3 Triple 32W)

FRS-12110 0

90˚ 75˚

700

60˚

1400

45˚

2100

EFFICIENCY: 54.0% ITL TEST #55424

Cone of Light* Dist. 6 8 10 12 14 16

FC 57.4 32.3 20.6 14.3 10.5 8.1

Dia. 6.4 8.5 10.7 12.8 15.0 17.1

0° SC 0.9 90° SC 1.1 180° SC 1.0 LER=35.3 AEC=$6.80

Ceiling Cut-out 12¼” Sq.

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 3x18W triple or 3x18-13W quad. Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory. 1

Emergency Ballast - Specify Voltage

-74 Internal 2-lamp EM ballast. Consult factory. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -14 Drop opal glass diffuser. -15 Prismatic C#73 tempered glass lens. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -26 Tamper-resistant button head recessed hex screw with center pin and 1 key / 10 fixtures. -32 White oversize trim extender. Specify size. -42 Drop bisymmetric prismatic polycarbonate lens.

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

-45 -46 -94 -CF

Gasket between ceiling and trim flange. Gasket between trim and lens. Custom color/finish. Specify. Consult factory. High temperature color filter. Specify color. For use with Options -13, -15, -18. -DG Drop Guard with C#73 tempered lens. -UV UV filter. For use with Options -13, -15, -18. Consult factory.

Other -47 Wet plaster frame for wet plaster ceiling. -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

6" x 12"

1 Triple

57 WATT MAXIMUM

6" x 11"

1 Triple

70 WATT MAXIMUM

FRT-06111 FRT-06112

Rectangles with Flat or Regressed Lens Features Lamp • Designed for one 4-pin triple/four tube amalgam compact fluorescent lamp: FRT-06111: 57W triple/four tube. FRT-06112: 70W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Reflector • FRT-06111: GlasSurfaced™ multi-faceted specular aluminum. • FRT-06112: Specular Alzak® aluminum. Trim Assembly - FRT-06111 • Shock-resisting, UV absorbing prismatic convex widespread Kirlin lens. See Options for others. • Rustfree polished nickel stainless door (304-L) and captive thumb screw. Concealed hinges.

• Beveled cast aluminum frame. White finish. Trim Assembly - FRT-06112 • Tapered aluminum black OptiGroove with white flange or see Option -40. • Regressed tempered prismatic C#73 lens. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Lightweight: Minimizes ceiling load. • Cool operation: Extends component life. • Entire luminaire serviced through aperture. • Built-in plaster frame. (FRT-06112; optional for FRT-06111) Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation • 27" galvanized hanger bars with adjustable mounting brackets (2) supplied. • Recesses indoor or outdoor in covered locations. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

90˚ 75˚

350

60˚

700

45˚

1050 0˚ 15˚ 30˚ EFFICIENCY: 53.1%

ITL TEST #54876

FRT-06112

Cone of Light* Dist. 6 8 10 12 14 16

FC 27.8 15.7 10.0 7.0 5.1 3.9

Dia. 6.7 9.0 11.2 13.5 15.7 18.0

0° SC 1.2 90° SC 1.1 180° SC 1.2 LER=39.5 AEC=$6.07

FRT-06112 (1 Triple 70W) 90˚ 75˚ 500 1000 1500 0˚ 3 4

1 8

Ceiling Cut-out 6 / ” x 12 / ”

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FRT-06111: for 4-pin 42/32/26W triple or 26W quad (multi-wattage/ voltage); FRT-06112: for 4-pin 57W triple/ four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

(FRT-06112)

FRT-06111 (1 Triple 57W)

Ceiling Cut-out 73/4” x 131/4”

Option -40 Also Shown

White Grooveless Flare Option -40

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FRT-06111

Tempered Prismatic C#73 Lens Option -15 (FRT-06111)

60˚ 45˚

Dist. 6 8 10 12 14 16

FC 38.8 21.8 14.0 9.7 7.1 5.5

Dia. 7.3 9.8 12.2 14.6 17.1 19.5

0° SC 1.2 15˚ 30˚ 90° SC 1.2 EFFICIENCY: 50.4% 180° SC 1.2 ITL TEST #54800 LER=34.3 AEC=$6.99

-73 Internal 1-lamp EM ballast for FRT-06112. -75 Remote 1-lamp EM ballast for FRT-06111. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FRT-06112. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FRT-06111. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FRT-06112. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FRT-06111. 13-42W only.

Lenses and Trims

FRT-06112-43 (1 Triple 57W) 90˚

Cone of Light*

75˚ 400

60˚

800 1200 0˚

45˚ 15˚

30˚

EFFICIENCY: 48.2% ITL TEST #54801

Cone of Light* Dist. 6 8 10 12 14 16

FC 32.2 18.1 11.6 8.0 5.9 4.5

Dia. 7.1 9.5 11.9 14.3 16.7 19.0

0° SC 1.3 90° SC 1.1 180° SC 1.1 LER=30.7 AEC=$7.81

-32 -40 -45 -46 -79

White oversize trim extender. Specify size. White grooveless flare trim for FRT-06112. Gasket between ceiling and trim flange. Gasket between trim and lens. Extension collar for ceilings up to 2” thick for FRT-06112 only. -94 Custom color/finish. Specify. Consult factory. -CF High temperature color filter. Specify color. For use with Options -13, -15, -18. -UV UV filter. For use with Options -13, -15, -18. Consult factory.

Other -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -47 Wet plaster frame for wet plaster ceiling for Emergency Ballast - Specify Voltage1 -15 Prismatic C#73 tempered lens. (FRT-06111) FRT-06111. Internal (factory installed) or remote (field mounted) -18 Opal flat glass diffuser. -99 Special modification. Consult factory. ballast, test switch and indicator light. Suitable for -20 White aluminum 1/2” cube egg-crate louver. -FS Additional in-line fuse. damp locations from 0° to 50°C (32° to 122°F) or -26 Tamper-resistant button head recessed hex -LE With 4-pin electronic lamp. 3500°K standard. with Cold Weather version (see -CE or -CR) -20° screw for FRT-06111 only. With center pin 82 CRI and 12,000 hour life. Specify to 55°C (-4° to 131°F). and 1 key / 10 fixtures. wattage, style and color temperature. 1 Visit www.kirlinlighting.com for most current performance / specifications. † Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

* Photometric Definitions and Keys begin on page 83.

FSS-13113 FSS-13114

13" x 13" 2 Triple

32 WATT MAXIMUM

13" x 13" 2 Triple

57 WATT MAXIMUM

Since 1895

Surface Mounted Regressed Lens Features White Grooveless Flare Option -40

flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens. Aluminum Housing • Rigid, rustproof, with white enameled finish. Exceeds 1000 hour ASTM 5% salt spray test. • No visible housing hardware. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware included. • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listings • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple/four tube amalgam or quad compact fluorescent lamps: FSS-13113: 32/26W triple. FSS-13114: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • FSS-13113: Multi-wattage/voltage. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum. Trim Assembly • Tapered aluminum black OptiGroove with white

Pendant Mount Option -PM

Bracket Mount Option -WB

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FSS-13113 (2 Quad 26W)

FSS-13113 (2 Triple 32W) FSS-13113

90˚ 75˚ 450

60˚

900 1350 0˚

Option -40 Also Shown FSS-13114

Representative Views:

45˚ 15˚

(Above) With optional pendant mount (Option -PM)

90˚ 75˚ 800 1600 2400 0˚

-39 Installed electronic dimming ballast. Indoor use. (FSS-13114:: 2x42W max.) 10°C (50°F) min. start. Specify wattage, voltage and brand. -43 Lower wattage. FSS-13113: for 4-pin 2x18W triple or 18-13W quad; FSS-13114: 2x42/32/26W triple or 26W quad (multiwattage/voltage). Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FSS-13113. -75 Remote 1-lamp EM ballast for FSS-13114. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FSS-13113. Specify voltage.

72 F 30

FC 40.8 22.9 14.7 10.2 7.5 5.7

Dia. 6.7 8.9 11.2 13.4 15.6 17.9

0° SC 1.1 45° SC 1.2 90° SC 1.2 LER=30.9 AEC=$7.77

60˚ 45˚

Dist. 6 8 10 12 14 16

-CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for FSS-13114. Specify voltage. -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for FSS-13113. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FSS-13114. 13-42W only.

Lenses and Trims -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -17 .187” prismatic high strength acrylic (FSS-13113). -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat poly diffuser for FSS-13113. -40 White grooveless flare trim. (CP x 1.10) -45 Gasket between trim and housing. -46 Gasket between trim and lens. -94 Custom color/finish. Consult factory. -CF High temperature color filter. Specify color. -FR Fresnel tempered glass lens. -UV UV filter. Consult factory.

Luminaire (Housing) Finishes -35 Natural aluminum acrylic enamel. -36 Gold acrylic enamel.

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

75˚ 250

60˚

500

45˚

750 0˚

15˚

30˚

EFFICIENCY: 47.9% ITL TEST #41343

FC 64.3 36.2 23.1 16.1 11.8 9.0

Cone of Light* Dist. 6 8 10 12 14 16

FC 18.4 10.4 6.6 4.6 3.4 2.6

Dia. 8.1 10.8 13.4 16.1 18.8 21.5

0° SC 1.4 90° SC 1.5 180° SC 1.3 LER=26.6 AEC=$9.03

FSS-13114-43 (2 Triple 42W) 90˚

Cone of Light* Dia. 6.4 8.5 10.6 12.7 14.8 17.0

0° SC 1.0 15˚ 30˚ 45° SC 1.1 EFFICIENCY: 39.6% 90° SC 1.1 ITL TEST #55736 LER=26.0 AEC=$9.25

Option -40 Also Shown

Ballast, Wattage and Voltage

Dist. 6 8 10 12 14 16

FSS-13114 (2 Triple 57W)

(Below) With optional wall bracket (Option -WB)

Options†

30˚

EFFICIENCY: 54.2% ITL TEST #42489

90˚

Cone of Light*

75˚ 700

60˚

1400

45˚

2100 0˚

15˚

30˚

EFFICIENCY: 51.0% ITL TEST #45278

Cone of Light* Dist. 6 8 10 12 14 16

FC 57.5 32.3 20.7 14.4 10.6 8.1

Dia. 6.2 8.3 10.3 12.4 14.5 16.6

0° SC 1.0 45° SC 1.1 90° SC 1.1 LER=57.6 AEC=$4.17

-37 Dark Bronze acrylic enamel. -38 Black acrylic enamel. -94 Custom color/finish. Specify. Consult factory.

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7) -87 Custom pendant / bracket length. Specify. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -WB Bracket mount. Must add -89 for wet label.

Other -99 -FD -FS -LE

Special modification. Consult factory. Two additional in-line fuses.Use with -84. Additional in-line fuse. With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

10" x 10" 1 Triple

42 WATT MAXIMUM

13" x 13" 2 Triple

42 WATT MAXIMUM

FSS-10115 FSS-13116

Streamlined Surface with Kirlin “K” Lens Features Lamp • Designed for 4-pin triple tube amalgam or quad compact fluorescent lamp(s): FSS-10115: one 42/32/26W triple or 26W quad. FSS-13116: two 42/32/26W triple or 26W quad. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • GlasSurfaced™ multi-faceted specular aluminum. Trim Assembly • Shock-resisting, UV absorbing prismatic convex widespread Kirlin lens. See Options for others. • Rustfree polished nickel stainless door (304-L) and

captive thumb screw. Concealed hinges for fast relamping. • Attractively beveled cast aluminum frame tooled to ensure close fit with door. White acrylic finish. Aluminum Housing • Rigid, rustproof, with white enameled finish. Exceeds 1000 hour ASTM 5% salt spray test. • No visible housing hardware. • Cool operation: Extends component life. Installation • Center point mounting for snug fit to ceiling. Mounting hardware included. • 2" collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL Listings • Wet, damp or dry locations, covered ceilings. (See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Pendant Mount Option -PM

90˚

FSS-10115

75˚ 300

60˚

600

Representative Views: (Above) With optional pendant mount (Option -PM) (Below) With optional wall bracket (Option -WB)

45˚

900 0˚

15˚

30˚

EFFICIENCY: 64.3% ITL TEST #45273

Cone of Light* Dist. 6 8 10 12 14 16

FC 22.6 12.7 8.1 5.6 4.1 3.2

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

0° SC 1.2 90° SC 1.2 180° SC 1.0 LER=37.7 AEC=$6.36

90˚ 75˚

1200

60˚ 45˚

Dist. 6 8 10 12 14 16

FC 46.9 26.4 16.9 11.7 8.6 6.6

Dia. 6.4 8.5 10.6 12.8 14.9 17.0

0° SC 1.1 45° SC 1.2 EFFICIENCY: 61.8% 90° SC 1.2 ITL TEST #45274 LER=37.2 AEC=$6.46

-39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage. FSS-10115: for 4-pin 18W triple or 18-13W quad; FSS-13116: 2x18W triple or 2x18-13W quad. Specify wattage. -84 Wired for two circuits. See -FD. (FSS-13116) -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1

75˚ 210 420

60˚ 45˚

630 EFFICIENCY: 62.8% ITL TEST #42484

Cone of Light* Dist. 6 8 10 12 14 16

FC 16.6 9.3 6.0 4.1 3.0 2.3

Dia. 6.5 8.7 10.8 13.0 15.2 17.4

0° SC 1.0 90° SC 1.2 180° SC 1.1 LER=36.7 AEC=$6.55

90˚ 75˚

450 900

60˚ 45˚

1350

EFFICIENCY: 64.0% ITL TEST #42486

Cone of Light* Dist. 6 8 10 12 14 16

FC 36.0 20.3 13.0 9.0 6.6 5.1

Dia. 6.3 8.4 10.5 12.6 14.7 16.8

0° SC 1.0 45° SC 1.1 90° SC 1.2 LER=37.1 AEC=$6.48

-HE Internal higher lumen (up to 1250) 1-lamp EM ballast for FSS-13116. 13-42W only. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast for FSS-10115. 13-42W only.

-36 -37 -38 -94

Lenses and Trims

Mounting

-13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -14 Drop opal glass diffuser. -15 Prismatic C#73 tempered glass lens. -17 .187" prismatic high strength acrylic lens. -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate diffuser. -26 Tamper-resistant button head recessed hex screw with center pin and 1 key / 10 fixtures. -45 Gasket between trim and housing. -46 Gasket between trim and lens. -CF High temperature color filter. Specify color. Use with -13, -15, -17, -18, -21 only. -DG Drop Guard with tempered C#73 glass lens. -DH Drop Holophane tempered lens (FSS-13116). -UV UV filter. Use with Options -13, -15, -17, -18, -21 only. Consult factory.

-54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2" collar for mounting beneath surface outlet box. 1/2" T.S. KO's. (See page 7) -87 Custom pendant / bracket length. Specify. -88 Swivel canopy for sloped ceilings up to 40°. Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing. -PM Pendant mount. 8” stem or see Option -87. Must add Option -89 for wet label listing. -WB Wall bracket mount. Must add Option -89 for wet label listing.

Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM ballast for FSS-13116. -74 Internal 2-lamp version. Consult factory. -75 Remote 1-lamp EM ballast for FSS-10115. -CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for FSS-13116. Specify voltage. Luminaire (Housing) Finishes -CR Remote cold weather (-20° to 55°C) 1-lamp -35 Natural aluminum acrylic enamel. EM ballast for FSS-10115. Specify voltage. 1 Visit www.kirlinlighting.com for most current performance / specifications. Alzak® is a registered trademark of ALCOA.

90˚

FSS-13116 (2 Triple 32W)

Cone of Light*

1800

Ballast, Wattage and Voltage

FSS-13116 (2 Triple 42W)

600

Options†

Bracket Mount Option -WB

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets FSS-10115 (1 Triple 32W) FSS-10115 (1 Triple 42W)

Performance at a Glance*

FSS-13116

Tempered Prismatic C#73 Lens Option -15

Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Other -99 -FD -FS -LE

Special modification. Consult factory. Two additional in-line fuses. Use with -84. Additional in-line fuse. With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature. † Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FWS-07117

7" x 7"

2 Triple

Since 1895

42 WATT MAXIMUM

Open Square Direct / Indirect Wall Mount Optional ShatterGuard™ Lens Features

All White Option -30

SofTex Titanium Option -57

SofTex Dune Option -71

SofTex Pewter Option -77

SofTex Wheat Option -91

Corrugated Option -CG

Lamp • Designed for one direct/one indirect 4-pin triple tube amalgam or quad compact fluorescent lamp: one each 42/32/26W triple or 26W quad direct and indirect. Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS. -FD. Reflectors • Upper: Specular Alzak® aluminum. • Lower: Clear SofTex Aluminum, self-flanged. • See Options for other finishes.

WeatherCap • Indirect position. Prismatic tempered glass lens. Aluminum Housing • Rustproof, tempered extruded 6063-T6 with white acrylic enameled finish. • Exceeds 1000 hour ASTM 5% salt spray test. • No visible housing hardware. • Cool operation: Extends component life. Installation • Wall bracket extrusion assembled to housing. Wall plate included, for recessed outlet box. • Mounting hardware included. • Indoor or outdoor for covered ceiling use. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FWS-07117

180˚165˚150˚

135˚

900

FWS-07117 (1/1 Triple 42W)

120˚ 450 0

0° SC 1.2 45° SC 1.3 90° SC 1.3 EFFICIENCY: 39.5% ITL TEST #54932 LER=26.6 AEC=$9.01

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast (direct position). Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp 1

74 F 30

EM ballast (direct position). Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast (direct position). 13-42W only. Specify voltage.

Trims (Direct Position Only) -30 -31 -57 -71 -77 -90

All white lower trim. (CP x .95) White acrylic enameled lower trim flange. SofTex Titanium lower trim. (CP x .80) SofTex Dune lower trim. (CP x .88) SofTex Pewter lower trim. (CP x .85) SofTex Champagne Gold lower trim. (CP x .91) -91 SofTex Wheat lower trim. (CP x .87) -94 Custom color/finish. Specify. Consult factory. -CG Corrugated SofTex clear lower trim.

Luminaire (Housing) Finishes -35 Natural aluminum acrylic enamel. -36 Gold acrylic enamel. -37 Dark Bronze acrylic enamel.

Visit www.kirlinlighting.com for most current performance / specifications.

* Photometric Definitions and Keys begin on page 83.

105˚ 90˚ 75˚

450 900

60˚ 45˚

-38 Black acrylic enamel. -94 Custom color/finish. Specify. Consult factory.

ShatterGuard™ Shield (Beneath Lamp) -ML MicroLux tempered mircroprismatic lens. Specify position. -SG .125” clear polycarbonate. Specify position.

Mounting -87 Custom wall bracket length. Specify length.

Other -99 Special modification. Consult factory. -DN Downlight only version of direct/indirect luminaire. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

13" x 13" 4 Triple

57 WATT MAXIMUM

13" x 13" 4 Triple

57 WATT MAXIMUM

FWS-13118 FWS-13119

100W MH Equivalent Direct/Indirect: Wall Mount Features Lamp • Designed for two direct/two indirect 4-pin triple/four tube amalgamcompact fluorescent lamps: two each 57W triple/four tube direct and indirect. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Single circuit wiring or see Option -84. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflectors • GlasSurfaced™ multi-faceted specular aluminum. Trim Assemblies - FWS-13118 • Tapered aluminum black OptiGroove with white flange or all white smooth self-flanged trim (Option -40) as shown in section view. • Regressed tempered prismatic C#73 lens.

Trim Assemblies - FWS-13119 • Shock-resisting, UV absorbing prismatic convex widespread Kirlin lens. See Options for others. • Rustfree polished nickel stainless door (304-L) and captive thumb screw. Concealed hinges. • Beveled cast aluminum frame. White finish. Aluminum Housing • Rigid, rustproof with white acrylic enameled White finish. Grooveless Flare Option -40 • Exceeds 1000 hour ASTM 5% salt spray test. (FWS-13118) • No visible housing hardware. • Cool operation: Extends component life. Installation • Wall bracket extrusion assembled to housing. Wall plate included, for recessed outlet box. • Mounting hardware included. • Indoor or outdoor for covered ceiling use. (See Option -86) UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. Tempered (See Option -89) Prismatic Three Year Limited Warranty C#73 Lens Option -15 • Complete standard fixture and ballast. (FWS-13119)

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

FWS-13118 (2/2 Triple 57W) FWS-13118

FWS-13119

180˚165˚150˚

135˚

2500

FWS-13119 (2/2 Triple 57W) 180˚165˚150˚

120˚ 1250

105˚

90˚

120˚ 1050 0

75˚ 1250

60˚

2500

45˚

Option -40 Also Shown 2 LAMPS IN EACH POSITION

Options† Ballast, Wattage and Voltage -43 Lower wattage: for 4-pin 4x42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F). -75 Remote 1-lamp EM ballast (direct position). -CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast (direct position). Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast (direct position). 13-42W only.

2 LAMPS IN EACH POSITION

90˚

60˚ 45˚

0° SC 1.0 45° SC 1.0 90° SC 1.0

0° SC 1.1 45° SC 1.2 90° SC 1.2

EFFICIENCY: 41.3% ITL TEST #54931 LER=28.9 AEC=$8.32

EFFICIENCY: 60.5% ITL TEST #54929 LER=41.5 AEC=$5.78

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

2100

-13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -14 Drop opal glass diffuser for FWS-13119. -15 Tempered prismatic C#73 lens (FWS-13119). -18 Opal flat glass diffuser. -20 White aluminum 1/2” cube egg-crate louver. -21 White flat polycarbonate diffuser. -26 Tamper-resistant recessed hex screw with center pin. 1 key/10 fixtures. FWS-13119. -CF High temperature color filter. Specify color. (FWS-13119 with Options -13, -15, -18, -21.) -DG Drop Guard with tempered C#73 (FWS-13119). -DH Drop Holophane tempered lens (FWS-13119). -FR Fresnel tempered glass lens (FWS-13118). -UV UV filter. Use with Options -13, -15, -18, -21. Consult factory. -40 White grooveless flare trim for FWS-13118. (CP x 1.10) -45 Gasket between trim and housing. -46 Gasket between trim and lens.

105˚

75˚ 1050

Lenses (Direct Position Only)

Trims (Direct and Indirect Position)

135˚

2100

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Mounting -87 Custom wall bracket length. Specify length.

Other -86 Prismatic WeatherCap (indirect position) tempered glass lens. Required for wet label. -99 Special modification. Consult factory. -DN Downlight only version of direct/indirect luminaire. -FD Two in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7.

* Photometric Definitions and Keys begin on page 83.

FRV-12120 FSV-12121

12" x 12" 2 Triple

57 WATT MAXIMUM

12" x 14" 2 Triple

57 WATT MAXIMUM

Since 1895

Vandal Resistant Squares: 100 Watt MH Alternatives Features Lamp • Designed for two 4-pin triple/four tube amalgam compact fluorescent lamps: 57W triple/four tube. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • Single circuit wiring or see Option -84. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Options -FS, -FD. Reflector • Full size aluminum with 94% reflectivity (min.). • Removable for servicing. Trim / Lens Assembly • Injection molded polycarbonate drop bisymmetric distribution lens or see Options. • Permanent continuous extruded tempered aluminum white lens clamps; four flush mounted center pin tamperproof screws with captive nuts.

• Tamperproof tools included. One per ten fixtures. Aluminum Housing • Super-strong 6063-T6 tempered extruded. • White enamel finish. Rustproof: exceeds 1000 hour ASTM 5% salt spray test. Outlet Box - FRV-12120 • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2" and 3/4" knockouts. Installation - FRV-12120 • Two die-formed vertically adjustable 16 gauge steel mounting yokes supplied. • Recesses indoor or outdoor in covered locations. Installation - FSV-12121 • Indoor or outdoor in covered locations. • 1/2” trade size (7/8” dia.) wiring KO’s. • Four mounting holes (1/2” diameter). UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • FRV-12120: Through-branch conductors (6 #12). Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance*

Ceiling Cut-out 13½ x 15½” FRV-12120 0

90˚ 75˚

FRV-12120 FSV-12121

550 1100

(2 Triple 57W)

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 25.9 14.6 9.3 6.5 4.8 3.6

Dia. 11.3 15.0 18.8 22.6 26.3 30.1

1650

0° SC 2.0 90° SC 1.3 EFFICIENCY: 54.9% 180° SC 2.0 ITL TEST #55036 LER=38.7 AEC=$6.20

FSV-12121 0

90˚ 75˚

FRV-12120-43 FSV-12121-43

450 900

(2 Triple 42W)

60˚ 45˚

Cone of Light* Dist. 6 8 10 12 14 16

FC 35.9 20.2 12.9 9.0 5.0 7.9

Dia. 10.5 13.2 15.8 18.4 21.1

1350

0° SC 1.3 90° SC 1.4 EFFICIENCY: 65.7% 180° SC 1.2 ITL TEST #52007 LER=46.8 AEC=$5.13

Options† Ballast, Wattage and Voltage -39 Consult factory for installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand. -43 Lower wattage: for 4-pin 2x42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage. -84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or

with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F). -73 Internal 1-lamp EM (42W max.) ballast. -74 Internal 2-lamp EM ballast. Consult factory. -75 Remote 1-lamp EM (57W) ballast. -CE Internal cold weather (-20° to 55°C) 1-lamp EM (42W max.) ballast. Specify voltage. -CR Remote cold weather (-20° to 55°C) 1-lamp EM (57W) ballast. Specify voltage. -HE 1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage. -HR 1 Remote higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses -13 Vandal resistant tempered prismatic C#73 spread lens above 1/8” flat polycarbonate. -15 Tempered prismatic C#73 glass lens. -ML MicroLux tempered mircroprismatic lens.

Visit www.kirlinlighting.com for most current performance / specifications.

Photometric Definitions and Keys begin on page 83.

Luminaire (Housing) Finishes - FSV-12121 -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Other -47 Wet plaster frame for wet plaster ceiling. (FRV-12120 only) -78 Housing modified for concrete pour. (FRV-12120 only). -99 Special modification. Consult factory. -FD Two additional in-line fuses. One per ballast. Use with Option -84. -FS Additional in-line fuse. -LE With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

7" x 10" 1 Quad

13 WATT MAXIMUM

9" x 14" 1 Quad

13 WATT MAXIMUM

Type IC - FNT-07122 Type IC - FNT-09123

Quad 13 NightLight / Emergency NightLight • Die-formed and louvered aluminum door bolts tightly to frame with two flush mounted screws. • Gasketing between door and frame. • White finish standard. Optional colors. • Optional lens (-17) instead of louver available. • Tamper resistant available. See Option -26. • Optional hospital grade duplex receptacle, GFCI and push button on-off switch available. Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Serviceable through removable door and frame. • Cool operation: Extends component life. Installation • Recesses in wall indoor or outdoor, covered locations. Min. operating temp. -22ºF (-30ºC). • Eight 1/2” T.S. (7/8” dia.) wiring KO’s. • Mounting holes provided on top, bottom and ends for direct mounting to masonry or steel studs. UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings. • Type IC. Approved for direct contact with insulation. Three Year Limited Warranty • Complete standard fixture and ballast.

Features Lamp • Designed for one 4-pin quad compact fluorescent lamp: 13W quad. Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected. For 9W (FNT-07122 only) see -43. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors for easy service. • Cold weather -22ºF (-30ºC). • End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. Battery Pack: Included with FNT-09123 • Test switch and indicator light on faceplate. • Damp location. Ambient temp. limits: 0°–50°C (32°–122°F). • Specify voltage. Reflector • Full size white 85% (min.) reflectivity. Lens • .220” clear polycarbonate behind louver. Trim Assembly • Attractively beveled and gasketed cast aluminum frame pulls tight to wall.

Lens Option -17

On-Off Switch Option -34

GFCI Option -GF

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FNT-07122: Type IC

FNT-09123: Type IC

FNT-07122 FNT-09123 (1 Quad 13W)

STANDARD WITH BATTERY PACK

90˚ 75˚

60˚

45˚

60 0° SC 1.3 90° SC 1.4 180° SC 1.4

Optional Faceplace Appearances

ITL TEST #54808 LER=34.3 AEC=$6.99

FNT-07122 Standard view

Lens Option -17

Options†

On-Off Switch Option -34

GFCI Option -GF

FNT-09123 Standard View

-43 Lower wattage: for 4-pin 9W twin. Consult factory for FNT-09123. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-34 With hospital grade push button on-off switch (see photo). Indoor use. -GF With duplex hospital grade GFCI installed (see photo). Indoor use. -HD With duplex hospital grade receptacle installed (see photo). Indoor use.

Lenses and Trims

Luminaire (Faceplate) Finishes

-17 Prismatic high strength acrylic lens with door instead of louvers (see photo). -26 Tamper-resistant flush mounted door screws and key.

-35 -36 -37 -38 -94

Wattage and Voltage

* Photometric Definitions and Keys begin on page 83. Alzak® is a registered trademark of ALCOA.

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory. † Additional information and photos are shown on pages 5-7.

www.kirlinlighting.com

LNT-07124 - Type IC

7" x 10"

Since 1895

LED

LED Type IC Louvered NightLight Optional Lens and LED Colors Features

Lens Option -17

On-Off Switch Option -34

GFCI Option -GF

LED • White recessed module (colors optional). • 2.7 watts - energy efficient, uniform luminance, cool. • 35 lumens typical. LED Power Supply • 10 volt DC. Electronically stabilized. • Minimum operating temperature -4°F (-20°C). • 120 volt standard. Load insensitive. Lens • .187" high strength acrylic prismatic lens behind louver. Trim Assembly • Attractively beveled and gasketed cast aluminum frame pulls tight to wall. • Die-formed and louvered aluminum door bolts tightly to frame with two flush mounted screws. • Gasketing between door and frame. • White finish standard. Optional colors.

• Optional lens (-17) instead of louver available with all colors. • Tamper resistant available. See Option -26. • Optional hospital grade duplex receptacle, GFCI and push button on-off switch available. Housing: Shallow 3” • Cool. Acrylic enameled aluminum. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Dissipates heat across entire surface area. • Serviceable through removable door assembly. Installation • Recesses in wall indoor or outdoor, covered locations. Minimum operating temp. -4°F (-20°C). • Mounting holes provided on top, bottom and ends. UL, C-UL (Canada) Listings • Damp or dry locations, covered locations. • Type IC. Approved for direct contact with insulation. Three Year Limited Warranty • Complete standard fixture.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance LNT-07124: Type IC

Footcandle Performance* Installed Top View

Optional Faceplace Appearances

Standard View

Lens Option -17

On-Off Switch Option -34

GFCI Option -GF

* Based on 14” mounting height; measuring footcandles at the floor perpendicular to the louvers.

Options† LED Colors -BL -GN -OR -RA -YE

Blue LED module instead. Green LED module instead. Orange LED module instead. Red/Amber LED module instead. Yellow LED module instead.

Voltage / Battery Pack -58 -73 -97 -98

277 volt 60 Hz. ballast. Emergency battery pack. Consult factory. Other voltage input. Consult factory. 347 volt, 50/60 Hz. input. Consult factory.

Lenses and Trims

Luminaire (Faceplate) Finishes

-17 .187" high strength prismatic acrylic lens with door instead of louvers. -26 Tamper-proof flush mounted door screws. -34 With hospital grade push button on-off switch. Controls LED panel. Indoor use. -GF With duplex hospital grade GFCI installed. White. Indoor use. -HD With white duplex hospital grade receptacle installed. Indoor use.

-35 Natural aluminum acrylic enameled faceplate/door and frame. -36 Gold acrylic enameled faceplate/door and frame. -37 Dark Bronze acrylic enameled faceplate/door and frame. -38 Black arcylic enameled faceplate/door and frame. -94 Custom color. Specify parts. Consult factory.

Other -99 Special modification. Consult factory. † Additional information and photos are shown on pages 5-7..

www.kirlinlighting.com

Alzak® is a registered trademark of ALCOA.

3" x 7"

Since 1895

LNT-03125

LED

LED Super Shallow Lensed StepLight Features LED • White recessed module (colors optional). • 1.4 watts - energy efficient, uniform, cool. • 17 lumens typical. LED Power Supply • 10 volt DC. Electronically stabilized. • Minimum operating temperature -4°F (-20°C). • 120 volt standard. Load insensitive. Lens • .125” white polycarbonate lens in front of LED source. • Optional .187" high strength prismatic acrylic. Trim Assembly • Gasketed aluminum frame pulls tight to wall. • White finish standard. Optional colors. • Tamper resistant available. See Options.

Housing: Super Shallow 1½” Depth • Cool. Acrylic enameled aluminum. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test. • Dissipates heat across entire surface area. • Serviceable through removable frame. Installation • Recesses in wall indoor or outdoor, covered locations. Minimum operating temp. -4°F (-20°C). • Mounting holes provided on top, bottom and ends. UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings. Three Year Limited Warranty • Complete standard fixture.

Blue LED Panel Option -BL

Green LED Panel Option -GN

Red/Amber LED Panel Option -RA

Yellow LED Panel Option -YE

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance

LNT-03125

Footcandle Performance* Installed Top View

* Based on 14” mounting height; measuring footcandles at the floor perpendicular to the lens.

Options† LED Colors

Lenses and Trims

Voltage / Battery Pack

-BL -GN -RA -YE

-17 .187" high strength acrylic prismatic lens. -26 Tamper-proof flush mounted frame screws.

-75 Remote emergency battery pack. Consult factory. -97 Other voltage input. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Blue LED module instead. Green LED module instead. Red/Amber LED module instead. Yellow LED module instead.

Frame Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Other -99 Special modification. Consult factory.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

www.kirlinlighting.com

LNS-05126

5" x 5"

LED

Since 1895

Square LED Marker Light Mounts in Standard 2-Gang Outlet Box (Provided)

Features

Blue LED Panel Option -BL

Green LED Panel Option -GN

Red/Amber LED Panel Option -RA

Yellow LED Panel Option -YE

LED • White recessed module (colors optional). • 4.4 watts - energy efficient, uniform, cool. • 108 lumens typical. LED Power Supply • 10 volt DC. Electronically stabilized. • Minimum operating temperature -4°F (-20°C). • 120 volt standard. Load insensitive. Lens • .125" translucent white acrylic lens in front of LED source. • Gasketing between lens and faceplate provided. Trim Assembly • Gasketed aluminum frame pulls tight to wall.

• White finish standard. Optional colors. • Tamper resistant available. See Options. Housing: Shallow 2” • 4” x 4” x 2” standard U. L. listed 2-gang galvanized steel outlet box. • Serviceable through removable frame. Installation • Recesses in wall indoor or outdoor, covered locations. Minimum operating temp. -4°F (-20°C). • Mounting holes provided on top, bottom and ends. UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings. Three Year Limited Warranty • Complete standard fixture.

Performance at a Glance

LNS-05126

Footcandle Performance* Installed Top View * Based on 14” mounting height; measuring footcandles at the floor perpendicular to the lens.

Options† LED Colors -BL -GN -RA -YE

Blue LED module instead. Green LED module instead. Red/Amber LED module instead. Yellow LED module instead.

Trims -26 Tamper-proof flush mounted door screws.

Frame Finishes -35 Natural aluminum acrylic enamel. -36 Gold acrylic enamel.

-37 Dark Bronze acrylic enamel. -38 Black acrylic enamel. -94 Custom color/finish. Specify. Consult factory.

Voltage / Battery Pack -75 Remote emergency battery pack. Consult factory. -97 Other voltage input. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

Other -99 Special modification. Consult factory.

† Additional information and photos are shown on pages 5-7.

www.kirlinlighting.com

Alzak® is a registered trademark of ALCOA.

7" x 10" 2 Quad 7" x 10"

Since 1895

Type IC - FNT-07127 Type IC - LNT-07128

13 WATT MAXIMUM

LED

Thru-Wall Type IC NightLights: Q13 and LED Features Lamp and Ballast - FNT-07127 • Designed for two 4-pin quad 13W compact fluorescent lamps. • Installed electronic high power factor, thermally protected. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors. Single circuit wiring. • Cold weather -22ºF (-30ºC). End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. LED - LNT-07128 • Two white recessed modules (colors optional). • 5.3 watts - energy efficient, uniform, cool. • 69 lumens typical. LED Power Supply - LNT-07128 • 10 volt DC (quantity: 2). Electronically stabilized. • Minimum operating temperature -4°F (-20°C). • 120 volt standard. Load insensitive. Lenses Behind Louvers (Gasketed) • FNT-07127: Clear .220" poly. • LNT-07128: High strength .187" prismatic acrylic. • Prevents sound transmission between rooms.

Trim Assemblies - Both Sides (Gasketed) • Attractively beveled and gasketed cast aluminum frame pulls tight to wall. White finish standard. • Die-formed and louvered aluminum door bolts tightly to frame with two flush mounted screws. • Tamper resistant available. See Option -26. • Optional lens, hospital grade duplex receptacle, GFCI and push button on-off switch available. Housing • Cool. Acrylic enameled aluminum. Rustproof. • Exceeds 1000 hour ASTM 5% salt spray test. • Dissipates heat across entire surface area. • Serviceable through removable door assembly. Installation • Recesses indoors or outdoors, covered locations. • Minimum operating temperature: (Q13) -22ºF (-30ºC); (LED) -4°F (-20°C). • Adjusts to walls from 4-3/8" to 5-1/4" thick. • Mounting holes provided on top, bottom and ends for mounting to masonry or steel studs. UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings. • Type IC. Approved - direct contact with insulation. Three Year Limited Warranty • Complete standard fixture (and ballast).

Lens Option -L1, -L2

On-Off Switch Option -S1

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FNT-07127: Type IC

GFCI or Receptacle Option -G1, -G2, -H1, -H2

LNT-07128: Type IC

FNT-07127 (2 Quad 13W)

75˚ 20

0° SC 1.3 90° SC 1.4 180° SC 1.4

ITL TEST #54808 LER=34.3 AEC=$6.99

90˚

60˚ 45˚

LNT-07128: 14” Mounting Height

Optional Faceplace Appearances Standard and Optional Appearances STANDARD

Options†

Lens Option -L1, -L2

GFCI Option -G1, -G2

Lenses and Trims

Footcandle Performance - Installed Top View Luminaire (Faceplate) Finishes

-26 Tamper-proof flush mounted door screws. -35 Natural aluminum acrylic enamel. -G1 With duplex hospital grade GFCI installed on -36 Gold acrylic enamel. Wattage and Voltage one side. White. Indoor use. -37 Dark Bronze acrylic enamel. -43 Lower wattage. FNT-07127: for 4-pin 9W -G2 With duplex hospital grade GFCI installed on -38 Black acrylic enamel. twin. both sides. White. Indoor use. -94 Custom color/finish. Specify. Consult factory. -75 Remote emergency battery pack. Consult -H1 With duplex hospital grade receptacle on factory. Other one side. White. Indoor use. -84 Wired for two circuits. Also see -FD. -99 Special modification. Consult factory. -H2 With duplex hospital grade receptacle on (FNT-07127 only) -FD Two additional in-line fuses. One per ballast. both sides. White. Indoor use. -97 Specify other voltage. Consult factory. Use with Option -84. (FNT-07127) -L1 .187" high strength acrylic prismatic lens and -98 347 volt, 50/60 Hz. input. Consult factory. -FS Additional in-line fuse. (FNT-07127) door instead on one side. Louvers on other -LE With 4-pin electronic lamp (FNT-07127). LED Colors - LNT-07128 side. 3500°K standard. 82 CRI and 12,000 hour life. -BL Blue LED module instead. -L2 .187" high strength acrylic prismatic lens and Specify wattage, style and color temperature. -GN Green LED module instead. door instead on both sides. -OR Orange LED module instead. -S1 With hospital grade push button on-off -RA Red/Amber LED module instead. switch installed on one side. Controls both -YE Yellow LED module instead. lamps / LED panels. Indoor use. † Additional information and photos are shown on pages 5-7. * Photometric Definitions and Keys begin on page 83. Alzak® is a registered trademark of ALCOA.

www.kirlinlighting.com

FNV-07129 LNV-07130

7" x 9" 1 Quad 7" x 9"

13 WATT MAXIMUM

LED

Since 1895

Vandal Resistant NightLights: Q13 and LED Features

Acrylic Lens Option -17

• Secured between faceplate and housing by four center pin tamperproof screws and captive nuts. • Gasketing between lens and faceplate standard. Faceplate (Gasketed) • White polyester enameled die-formed 16 gauge galvanized steel. Removable for servicing. • Secured to housing by four center pin tamperproof screws and captive nuts. • Gasketing between faceplate and wall standard. Housing • 16 gauge galvanized steel, formed and welded. • White acrylic enamel finish. Installation • Recesses indoors or outdoors, covered locations. • Minimum operating temperature: (Q13) -22ºF (-30ºC); (LED) -4°F (-20°C). • Ten 1/2” T.S. (7/8” dia.) wiring KO’s. • Mounting holes provided on top, bottom and ends for direct mounting to masonry or steel studs. UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings. Three Year Limited Warranty • Complete standard fixture (and ballast).

Lamp and Ballast - FNV-07129 • Designed for one horizontal 4-pin quad 13W compact fluorescent lamp. • Installed electronic high power factor, thermally protected. • 120-277 multi-volt; 50/60 Hz. THD < 10%. • ClickQuick connectors. Single circuit wiring. • Cold weather -22ºF (-30ºC). End of lamp life protection circuit. RFI filter. • Internally fused. Also see Option -FS. LED - LNV-07130 • White recessed module (colors optional). • 2.7 watts - energy efficient, uniform, cool. • 35 lumens typical. LED Power Supply - LNV-07130 • 10 volt DC. Electronically stabilized. • Minimum operating temperature -4°F (-20°C). • 120 volt standard. Load insensitive. Lens Behind Louver (Gasketed) • FNV-07129: Clear .220" polycarbonate. • LNV-07130: High strength .187" prismatic acrylic behind .220” clear polycarbonate.

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

Performance at a Glance* FNV-07129

LNV-07130

FNV-07129 (1 Quad 13W)

75˚ 20

0° SC 1.3 90° SC 1.4 180° SC 1.4

ITL TEST #54808 LER=34.3 AEC=$6.99

90˚

60˚ 45˚

LNV-07130: 14” Mounting Height

STANDARD APPEARANCE

Lens Option -17

Footcandle Performance - Installed Top View

Housing KO’s

Options† Wattage and Voltage

Lens

Other

-43 Lower wattage. FNV-07129: for 4-pin 9W twin. -75 Remote battery pack. Consult factory. -97 Specify other voltage. Consult factory. -98 347 volt, 50/60 Hz. input. Consult factory.

-17 .187” high strength prismatic acrylic lens behind .220 clear polycarbonate and door instead of louvers.

-78 -99 -FS -LE

LED Colors - LNV-07130 -BL -GN -OR -RA -YE

Blue LED module instead. Green LED module instead. Orange LED module instead. Red/Amber LED module instead. Yellow LED module instead.

Luminaire (Faceplate/Frame) Finishes -35 -36 -37 -38 -94

* Photometric Definitions and Keys begin on page 83.

www.kirlinlighting.com

Natural aluminum acrylic enamel. Gold acrylic enamel. Dark Bronze acrylic enamel. Black acrylic enamel. Custom color/finish. Specify. Consult factory.

Concrete pour modification. (FNV-07129) Special modification. Consult factory. Additional in-line fuse for FNV-07129. With 4-pin electronic lamp (FNV-07129). 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

† Additional information and photos are shown on pages 5-7. Alzak® is a registered trademark of ALCOA.

Since 1895

ADDITIONAL PHOTOMETRY, DEFINITIONS and KEYS

Additional Photometry (1 Triple 32W) SINGLE FIXTURE 1' 2' 3'

600

60˚

1200 1800 0˚

45˚ 15˚

WALL >

30˚ 0° 90° 180°

DISTANCE FROM CEILING IN FEET

75˚

EFFICIENCY: 41.7%

FRR-06004-WW

300

2.8 5.2 5.4 5.5 5.1 4.1 3.3 2.7 2.1

2.2 4.4 4.7 5.0 4.7 4.0 3.2 2.7 2.1

1.3 2.8 3.4 3.8 3.9 3.5 2.9 2.5 2.1

0.7 1.5 2.1 2.6 2.7 2.7 2.5 2.1 1.9

0.4 0.8 1.2 1.6 1.8 1.9 1.9 1.8 1.6

4.9 9.1 10.9 12.2 12.6 11.9 10.8 9.7 8.8

4.6 9.0 10.8 12.4 12.9 12.1 11.0 9.8 8.4

ITL TEST #54947

FRR-06002-WW

SINGLE FIXTURE 1' 2' 3'

60˚

600

45˚

900 0˚

15˚

WALL >

30˚ 0° 90° 180°

DISTANCE FROM CEILING IN FEET

75˚ 300

EFFICIENCY: 32.1%

1 2 3 4 5 6 7 8 9

2.5 1.9 10.0 8.1 13.8 11.9 11.7 10.7 8.4 7.9 6.1 5.9 4.6 4.5 3.7 3.7 2.9 3.0

1.0 4.4 7.7 7.7 6.3 5.1 3.9 3.4 2.8

0.5 1.8 4.0 4.7 4.3 3.8 3.2 2.7 2.4

SINGLE FIXTURE 1' 2' 3'

15˚

30˚ 0° 90° 180°

EFFICIENCY: 41.7%

DISTANCE FROM CEILING IN FEET

WALL >

45˚

45˚ 15˚

WALL >

0° 90° 180°

EFFICIENCY: 32.1%

0.3 0.7 1.9 2.6 2.7 2.7 2.4 2.1 2.0

3.9 13.8 22.4 23.1 20.0 16.8 14.2 12.4 11.3

3.6 13.4 22.5 23.4 20.5 17.3 14.5 12.5 10.8

2.5 1.9 10.0 8.1 13.8 11.9 11.7 10.7 8.4 7.9 6.1 5.9 4.6 4.5 3.7 3.7 2.9 3.0

1.0 4.4 7.7 7.7 6.3 5.1 3.9 3.4 2.8

3.9 13.8 22.4 23.1 20.0 16.8 14.2 12.4 11.1

3.2 9.5 16.3 17.2 15.7 13.4 11.5 10.1 8.4

SINGLE FIXTURE 1' 2' 3'

75˚

4.3 11.1 17.7 17.8 15.5 13.1 11.3 10.1 8.8

0.3 0.7 1.9 2.6 2.7 2.7 2.4 2.1 2.0

3.9 13.8 22.4 23.1 20.0 16.8 14.2 12.4 11.3

3.6 13.4 22.5 23.4 20.5 17.3 14.5 12.5 10.8

60˚

750 0˚

45˚ 15˚

WALL >

30˚ 0° 90° 180°

EFFICIENCY: 32.4%

3.9 13.8 22.4 23.1 20.0 16.8 14.2 12.4 11.1

4.2 11.1 17.6 17.8 15.5 13.1 11.3 10.1 8.8

3.2 9.5 16.3 17.2 15.7 13.4 11.5 10.1 8.4

4.3 11.1 17.7 17.8 15.5 13.1 11.3 10.1 8.8

LER=24.1 AEC=$9.97

(1 Triple 42W)

90˚

500 4.2 11.1 17.6 17.8 15.5 13.1 11.3 10.1 8.8

0.5 1.8 4.0 4.7 4.3 3.8 3.2 2.7 2.4

ITL TEST #55039

MULTIPLE FIXTURES 3' CENTERS 4' CENTERS

30˚

1 2 3 4 5 6 7 8 9

MULTIPLE FIXTURES 3' CENTERS 4' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

7.7 6.4 11.4 9.6 13.1 11.0 12.6 11.1 9.8 8.8 7.4 6.9 5.4 5.2 4.2 4.1 3.2 3.3

4.1 6.3 7.0 7.8 6.8 5.6 4.5 3.7 3.0

LER=24.1 AEC=$9.97

2.2 3.6 3.9 4.5 4.5 4.1 3.5 3.0 2.5

1.2 2.0 2.2 2.4 2.8 2.7 2.5 2.3 2.1

13.2 20.5 23.0 23.8 21.4 18.3 15.5 13.3 11.9

12.8 19.9 22.7 23.8 21.6 18.5 15.6 13.5 11.5

ITL TEST #54950

13.2 20.4 23.0 23.7 21.4 18.3 15.5 13.3 11.9

10.6 15.9 18.3 18.4 16.6 14.3 12.2 10.8 9.3

9.4 14.3 16.6 17.6 16.5 14.4 12.3 10.6 8.8

10.6 15.9 18.3 18.4 16.6 14.3 12.2 10.8 9.3

LER=25.2 AEC=$9.54

(1 Triple 32W)

75˚

1800 0˚

900 0˚

LER=25.4 AEC=$9.79

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

90˚

1200

4.3 7.1 8.6 9.6 9.8 9.3 8.6 7.9 7.0

250

FRR-04003-WW

60˚

3.7 6.5 8.3 9.4 9.9 9.5 8.7 7.9 6.6

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

FRR-07005-WW

ITL TEST #55039

600

4.3 7.1 8.6 9.6 9.8 9.3 8.6 7.9 7.0

(1 Triple 42W)

90˚

60˚

600

4.9 9.1 10.9 12.2 12.6 11.9 10.8 9.7 8.8

SINGLE FIXTURE 1' 2' 3'

75˚

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

(1 Triple 42W)

90˚

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

DISTANCE FROM CEILING IN FEET

90˚

DISTANCE FROM CEILING IN FEET

FRR-04001-WW

MULTIPLE FIXTURES 4' CENTERS 3' CENTERS

FIXTURE INSTALLED 3' FROM WALL Footcandle Distribution on Wall Surface

1 2 3 4 5 6 7 8 9

2.8 5.2 5.4 5.5 5.1 4.1 3.3 2.7 2.1

2.2 4.4 4.7 5.0 4.7 4.0 3.2 2.7 2.1

1.3 2.8 3.4 3.8 3.9 3.5 2.9 2.5 2.1

0.7 1.5 2.1 2.6 2.7 2.7 2.5 2.1 1.9

0.4 0.8 1.2 1.6 1.8 1.9 1.9 1.8 1.6

4.9 9.1 10.9 12.2 12.6 11.9 10.8 9.7 8.8

4.6 9.0 10.8 12.4 12.9 12.1 11.0 9.8 8.4

ITL TEST #54947

4.9 9.1 10.9 12.2 12.6 11.9 10.8 9.7 8.8

4.3 7.1 8.6 9.6 9.8 9.3 8.6 7.9 7.0

3.7 6.5 8.3 9.4 9.9 9.5 8.7 7.9 6.6

4.3 7.1 8.6 9.6 9.8 9.3 8.6 7.9 7.0

For detailed ITL reports see www.kirlinlighting.com or data disk or submittal sheets

LER=25.4 AEC=$9.79

Definitions and Keys

Cone of Light * Cone of Light Key

Sample:

Ft. Distance from fixture FC Footcandles at nadir (0°) Dia. Circle of light at 50% of FC * Dia. (in ft.) shown is where FC value is half the FC at nadir.

LER (Luminaire Efficiency Rating) LER = Luminaire Efficiency x Total Lamp Lumens x Ballast Factor* Input Watts

AEC (Annual Energy Cost) AEC = Annual Energy Cost per 1000 lumens (based on 3000 hours use @ $0.08 KWH)

Dist. 6 8 10 12 14 16

FC 38.6 21.7 13.9 9.7 7.1 5.4

Dia. 8.1 10.8 13.5 16.1 18.8 21.5

In furtherance of Kirlin’s mission to promote and provide high efficiency lighting, we have included these formulas and the LER and AEC values on each product page as part of a voluntary program developed by NEMA and Fixture Manufacturers to satisfy the basic requirements of the Federal Energy Policy Act (EPACT) which became effective October 1, 1995. All manufacturers of luminaires should be distributing this information so that owners, designers and specifiers can assess the relative energy efficiency and operating cost of their products.

*Ballast factors typically range between 0.85 and 1.00. All LER data assumes 0.90 ballast factor. www.kirlinlighting.com

Since 1895

KIRLIN HALLMARKS OF VALUE For over a century, Kirlin has maintained a consistent philosophy and focus in every aspect of our business that has translated into these outstanding hallmarks of value: •

•

Optimized Optics. Kirlin optical systems are designed to maximize performance and efficiency for each specific lamp and application. Accurate Photometry. All Kirlin products are independently tested using a complete luminaire, as installed, eliminating the 500 “unexpected” that occurs with “in-house” data or photometry 1000 1500 measured with optical 0˚ 15˚ components only.

•

Three Year Warranty. Best in the industry and includes the ballast.

•

All Aluminum Housings. Rustproof enameled aluminum maximizes heat dissipation, prevents corrosion and lightens ceiling loads, unlike competitive steel housings.

•

Reflection Point and www.kirlinlighting.com. Our lighting education center and website offer excellent “in-person” and “on-line” opportunities to extend your knowledge of lighting and all that Kirlin offers. Our proprietary interactive website database provides quick searches of our products to find those best suited to your project.

Shallow Plenum Design. Through an efficient design that dissipates heat and positions the lamp horizontally, Kirlin’s shallow fixture housing (up to 70% shallower than competitive models) is the solution for shallow plenum areas.

www.kirlinlighting.com

•

Options, Options and More Options. Just look inside. No one in the industry offers a wider array of options than Kirlin.

•

Quick Ship Program: Within 5 business days! In addition, standard products ship within 2-4 weeks!

•

U.L. Listed. Wet, damp or dry locations in covered ceilings.

•

Self-flanged reflectors. One piece 100% aluminum, with no plastic trim rings to warp, discolor or misplace.

•

Cooler Operation. Aluminum construction throughout provides maximum heat dissipation/cooling, which improves performance and extends component life.

•

Super Quiet WhisperPack™ Ballasts. Kirlin HID WhisperPack is the industry’s premium sound reduction technology.

•

Easy Servicing. Even when installed in inaccessible ceilings, all Kirlin products are easily accessed and serviced through the housing aperture.

•

Fuses and Mounting Hardware Included. No hidden or extra material or installation costs.

•

Top Accessible Available. Most recessed products can be accessed and serviced from above with Option “-TA”.

90˚ 75˚ 60˚ 45˚ 30˚

COMPACT FLUORESCENT TRIPLE TUBE BALLAST and AMALGAM LAMP OPERATING DATA

Since 1895

ELECTRONIC FLUORESCENT STANDARD BALLAST ELECTRICAL DATA LAMP WATTS MIN. START. TEMP - °F /°C TOTAL INPUT WATTS (2) 1 lamp 2 lamp 3 lamp INPUT VOLTAGE MAX. INPUT AMPS (3) 1 lamp 2 lamp 3 lamp

(1)

13 WATT -22°F / -30°C

18 WATT -22°F / -30°C

26 WATT -22°F / -30°C

32 WATT -22°F / -30°C

42 WATT -22°F / -30°C

57 WATT -22°F / -30°C

70 WATT -22°F / -30°C

16 29 45

20 39 59

29 54 87

36 68 100

46 93 126

64 130 194

75 156 —

120

277

120

277

120

277

120

277

120

277

120

277

120

277

0.13 0.25 0.38

0.06 0.11 0.17

0.17 0.33 0.50

0.08 0.14 0.22

0.24 0.45 0.74

0.11 0.21 0.31

0.31 0.57 0.83

0.13 0.25 0.36

0.39 0.80 1.10

0.17 0.33 0.46

0.52 1.07 1.59

0.23 0.50 0.73

0.64 1.30 —

0.27 0.56 —

ELECTRONIC FLUORESCENT DIMMING BALLAST ELECTRICAL DATA LAMP WATTS MIN. START. TEMP - °F /°C TOTAL INPUT WATTS (2) 1 lamp 2 lamp 3 lamp INPUT VOLTAGE MAX. INPUT AMPS (3) 1 lamp 2 lamp 3 lamp

13 WATT —

18 WATT 50°F / 10°C

26 WATT 50°F / 10°C

32 WATT 50°F / 10°C

42 WATT 50°F / 10°C

57 WATT 50°F / 10°C

70 WATT 50°F / 10°C

— — —

22 43 65

31 58 89

38 76 114

49 98 137

66 132 198

80 160 —

120

277

120

277

120

277

120

277

120

277

120

277

120

277

— — —

0.20 0.42 0.62

0.08 0.17 0.25

0.26 0.50 0.76

0.12 0.21 0.33

0.32 0.64 0.96

0.14 0.28 0.42

0.41 0.82 1.23

0.18 0.36 0.54

0.55 1.10 1.65

0.24 0.48 0.72

0.67 1.34 —

0.29 0.58 —

ELECTRONIC 4-PIN COMPACT FLUORESCENT TRIPLE TUBE LAMP DATA NOMINAL WATTS INITIAL / MEAN LUMENS (4) NOM. LUMENS PER WATT LAMP BASE RATED AVERAGE LIFE (Hrs) (5) COLOR RENDERING INDEX (CRI) COLOR TEMPERATURE (°K) Manufacturers as follows: (a) = General Electric (b) = Philips (c) = Osram Sylvania NOM. LAMP VOLTS NOM. LAMP CURRENT (Amps)

13 900 / 755 69 GX24q-1 12,000 82 2700 (a,c) 3000 (a,c) 3500 (a,c) 4100 (a,c) 5000 — 77 0.165

18 1200 / 1020 66 GX24q-2 12,000 82

26 1800 / 1530 69 GX24q-3 12,000 82

32 2400 / 2040 75 GX24q-3 12,000 82

42 3200 / 2720 76 GX24q-4 12,000 82

57 4300 / 3690 75 GX24q-5 12,000 82

70 5200 / 4470 74 GX24q-6 12,000 82

2700 3000 3500 4100 5000

2700 (a,b,c) 3000 (a,b,c) 3500 (a,b,c) 4100 (a,b,c) 5000 — 101 0.320

2700 (a,b,c) 3000 (a,b,c) 3500 (a,b,c) 4100 (a,b,c) 5000 — 135 0.320

2700 (a,b,c) 3000 (a,b,c) 3500 (a,b,c) 4100 (a,b,c) 5000 (a) 182 0.320

2700 (a,c) 3000 (a,c) 3500 (a,c) 4100 (a,c) 5000 (a) 220 0.320

(a,b,c) (a,b,c) (a,b,c) (a,b,c) —

80 0.210

(a,b,c) (a,b,c) (a,b,c) (a,b,c) —

80 0.300

Notes: (1) Values shown are typical for ballasts provided by The Kirlin Company. Actual starting temperatures vary among ballast manufacturers. To ensure the lowest possible starting temperature as standard, choose Kirlin quality! (2) Total input watts will vary among ballast manufacturers. Values shown are generally the maximum for ballast models currently available. Ballast factors generally range between 0.85 and 1.00. (3) Maximum input current will vary among manufacturers. Values shown represent the highest rated values for ballast models currently available. (4) Lighting calculations for compact fluorescent lamps and fixtures should be based on Mean Lumens. Additional factors for dirt depreciation and ballast factor variations should also be applied. (5) Rated average lamp life is based on 3 hours per start, at 50% lamp mortality.

GX24q-1

GX24q-2

GX24q-3

GX24q-4

GX24q-5

GX24q6