PLASMA SERIES CNC
Available in 4' x 4', 4' x 8', and 5' x 10' • Precision square profile linear bearings on X, Y, and Z axes • Covered Y-Axis Bearing Rails • Helical rack and pinion drive system for X and Y axes (Smooth and precise motion for amazing cut quality) • Precision ball screw for Z axis • Central oiling system for all axes • Heavy Duty Water Table Frame, (Proven SmartShop Frame and motion devices) (Water table minimizes fumes by cooling flash) • Break away torch holder with sensor (Detects torch collision and stops program) • ARC feedback "Auto Torch Height Control" ATHC system (Uses divided Arc voltage to sense the change in cut height and adjusts automatically.) • The Touchscreen has a simple plasma setup screen to input the cutting parameters from the cut charts pierce height, cut height, pierce delay and feed rate. This allows for ease of setup and the ability to use the same G-code for many different metal thicknesses. This also allows for very simple Cam software like V-carve to work flawlessly. Advanced Controls for Higher-End Users • For advanced users there are fine-tuning parameters for the height control to allow fine-tuning for specific production methods • 5 Micron Filter set for the pneumatic air to the power supply, included • Laguna's plasma controller will work with any power supply that can provide a divided ARC feedback less than 10vdc Max
4th Axis Rotation Available • Belt driven 4th axis turning device • The Driven shaft is threaded 1 1/4"- 8” so any turning chuck or face plate can be used to hold material. • The tail stock has a Morse taper receiver for use with any style rotating center.
12
B+R PLC control system with Networkcapable Touchscreen (Built in HTTP server for networking, file (Built-in transfers and remote diagnostics) (4-year track record on controller with SmartShops and IQ) Z-Axis Control
Tables Available In: • 4' x 4' • 4' x 8' • 5' x 10' • Custom Sizes
Break-Away Torch Safety System