Orbis Classic Range by Laidlaw Solutions Ltd

Uniclass L4 181

EPIC D181

CI/ SfB (31.5)

Orbis Classic Range

THE LAIDLAW SERVICE Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware to the UK construction industry. Laidlaw is able to offer a wide range of architectural products that combine design and function across a broad band of product categories. This is achieved by working closely with manufacturing partners ensuring consistent quality and performance are achieved from the products offered and by keeping up to date with market requirements and technical specifications to ensure Laidlaw remains at the forefront of the markets it serves. In addition to the renowned Orbis brand the Laidlaw portfolio also incorporates specialist product areas such as Electronic Access Control and Anti-Ligature fittings. Laidlaw is also able to offer a comprehensive system of Orbis Timber Doorsets which are fully compatible with the Orbis range of architectural hardware. For further information on any of the Laidlaw products and services, please refer to the full range of product brochures or alternatively call one of the Laidlaw branches nationwide as listed on the back page of this brochure.

Specification Advice Laidlaw's team of GAI trained consultants is available to assist with all of the detailed product enquiries associated with the increasingly complex subject of hardware specification. Whether it be advice on product compliance for Disability Discrimination Act (DDA) applications or test certification for fire door applications, your local Laidlaw Technical Consultant is always on hand to guide you to the most appropriate specification.

Product Development Orbis products are subject to continual design and manufacturing development in order to improve performance or to meet the changing demands of standards, testing or other building legislation.

Project Management Having provided guidance in the specification and selection of appropriate products, Laidlaw's scheduling team will produce fully detailed, door by door ironmongery schedules along with a full bill of materials. Laidlaw will then project manage the supply of product including the manufacture of special or bespoke items; supply of relevant installation drawings; and, where necessary, certification and delivery schedules. CPD seminars Laidlaw is a RIBA approved provider of CPD seminars and is able to offer specifiers seminars and workshops on a wide range of hardware related subjects including DDA, Doc M and BS 8300 compliance.

Packaging and Delivery Laidlaw will work alongside the customer's project management team to ensure the product arrives on site in the most appropriate form. This could include labelling to the architect's door numbers, or already installed on Orbis Timber Doors. Laidlaw will ensure deliveries are made in full and on time.

1 www.laidlaw.net

ORBIS CLASSIC - CONTENTS

THE LAIDLAW SERVICE

ORBIS CLASSIC INTRODUCTION

3-5

LEVER FURNITURE, BACKPLATES & ESCUTCHEONS

6 - 10

PULL HANDLES

11 - 13

PUSH PLATES, KICKING PLATES & FIXINGS

OVERHEAD DOOR CLOSERS

15 - 19

CONCEALED DOOR CLOSERS

FIRE DOOR CONTROLS

ELECTROMAGNETIC DOOR CLOSERS

FLOOR SPRINGS

23 - 24

HINGES

MORTICE CYLINDER LOCKCASES

26 - 28

CYLINDERS SIGNS & SYMBOLS

29 30 - 32

DOOR STOPS & HOLDERS

PULLS, HOOKS & WC FITTINGS

FLUSH & SLIDE BOLTS

PANIC EXIT HARDWARE

36 - 40

STANDARDS & BS EN CLASSIFICATIONS

41 - 42

DDA, APPROVED DOC. M & BS 8300

43 - 45

INDEX

2 www.laidlaw.net

ORBIS CLASSIC - INTRODUCTION

Orbis Classic

A comprehensive and fully co-ordinated range of architectural hardware defined by a simple and timeless aesthetic. This visual clarity is combined with high quality performance which lends itself to a wide range of applications from contemporary commercial offices to public buildings. Quality of design, manufacture, finish and performance are provided in equal measure in Orbis Classic, with most components available in Satin or Polished Stainless Steel or in a Silk Anodised Aluminium finish.

Front cover - Orbis 54 801.19 lever mounted on 50 800.3.7 backplate in Satin Stainless Steel This page - Orbis curved lever handle 54 833.22 on 50 800.6 rose used with 11 861R sashlock and Orbis Classic cylinder and turn

3 www.laidlaw.net

ORBIS CLASSIC - INTRODUCTION Within the Orbis Classic range is a selection of lever and pull handle designs and an advanced system of door closers including many which will enable building owners to satisfy their obligations under the Disability Discrimination Act.

Co-ordination of design and finish is achieved across a full range of products ensuring integrated Orbis Classic products can be specified for the full hardware requirement of most buildings.

Orbis Classic door furniture can be completely integrated with Orbis Timber Doorsets Range. Factory preparation for the hardware ensures perfect installation to maximise the high performance and aesthetics of the Orbis Classic Range. Please refer to our Orbis Timber Doorsets brochure. c

Each component in the Orbis Classic range is designed for maximum performance. Products are tried and fully tested to the latest BS EN standards with full certification and CE marking where applicable.

a. Orbis 19mm diameter pull handle used in conjunction with Orbis 12 851 deadlock b. Smoothline door closer 31 804 in Satin Stainless Steel finish SS7 c. Flush bolt 34 005.2 in Orbis Silk Anodised Aluminium finish, SA7 d. Bathroom lock with 78mm centres using Orbis 54 801.22 lever on concealed fixing backplate with large bathroom turn function

4 www.laidlaw.net

ORBIS CLASSIC - INTRODUCTION BS EN Performance standards Many of the product types within the Orbis Classic range have been developed specifically to meet or exceed the latest European Standards. Where different grades of compliance are applicable, this will be indicated in the description against each item. More detailed information on standards and BS EN Classifications can be found on page 41 & 42. CE Marking Where CE marking is permitted, items are marked with the CE icon. The CE classification is indicated against each item where this is appropriate. Further information on CE marking and classifications can be found on page 41.

Fire Testing Fire testing is an ongoing process with Laidlaw. Many of the Orbis Classic hardware items have been included on timber fire door tests up to 2 hours and on steel fire doors up to 4 hours. The icon indicates the item has been successfully included in fire tests and the brief details of these are included in the general descriptions.

DDA, Approved Doc. M & BS 8300 The principal of ensuring buildings are accessible to able and less able people alike is manifest in Approved Document M of the Building Regulations and with further guidance in BS 8300 which contains specific dimensional information for certain items of architectural hardware. The disabled symbol is used throughout this document to identify those Orbis Classic items which conform to the requirements of Approved Document M and are therefore appropriate for use in DDA applications. Further information can be found on pages 43 to 45.

Materials & Finishes Orbis Classic products are manufactured using only the highest grade materials including Grade 316 stainless steel. The range is available in Satin Stainless Steel, Polished Stainless Steel and Silk Anodised Aluminium.

Above - 53 833.30BB pull handles in Satin Stainless Steel

Ordering Products When ordering products from the catalogue remember to specify the finish code after the product code - e.g 53 833.30BBPS7

SS7 Satin Stainless Steel

In certain cases, an applied finish is used. These are carefully selected to match the main hardware finishes. Dimensions

PS7 Polished Stainless Steel

All dimensions shown throughout this brochure are in mm. The products listed within this publication are subject to a 5 year guarantee against defects proved to be the result of faulty manufacture or defective materials unless otherwise stated. Extended guarantees can be obtained for specific projects on application via your Laidlaw Technical Consultant and subject to an agreed maintenance programme. 5 www.laidlaw.net

SA7 Silk Anodised Aluminium

ORBIS CLASSIC - LEVER FURNITURE

The essence of the Orbis Classic range is a series of timeless round bar and eliptical section lever handles which are supplied independant of the rose or plate mounting. This modular approach provides flexibility and allows levers to be changed or replaced without having to remove the rose or plate mounting. Products can be ordered separately and put together on site.

Orbis Classic lever handle assemblies have the following features • All levers are interchangeable on both rose and plate mountings • Phosphor bronze bearing washer for extra durability as standard • Nylon bearing washer available to order • Supplied with M4 bolt through fixings for back to back assembly and optional face fixing screws • Snap on rose or plate cover conceals fixings • Fixing centres (38mm) compatible with all major lockcase ranges • 8mm 'Break Through' spindle supplied as standard for secure grub screw fixing • Other spindles available (see page 10)

6 www.laidlaw.net

ORBIS CLASSIC - LEVER FURNITURE Finishes

Lever Handle - Straight Item no.

• Round bar straight lever handle • Suitable for use with all rose or plate mountings (see pages 9-10) • 8mm spindle supplied • SS7 & PS7 finishes are Grade 316 stainless steel • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade)

Diameter (mm)

54 800.19

54 800.22

SS7 PS7

• •

SA7

• •

Unit pair pair

Specification advice Remember to specify roses or backplates for use with lever handles (see pages 9-10) 19Ø

Please note, all levers are supplied with "break through" type spindle for secure grub screw fixing.

134

Finishes

Lever Handle - Return to door Item no. 54 801.19

54 801.22

SS7 PS7

• •

SA7

• •

Unit pair pair

19Ø

• Round bar ‘return to door’ lever handle • Suitable for use with all rose and plate mountings (see pages 9-10) • 8mm spindle supplied • SS7 & PS7 finishes are Grade 316 stainless steel • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade) • Complies with BS8300 when used with 5mm thick roses or plates

Diameter (mm)

134

Specification advice For escape sashlock applications we recommend the use of a lever fixed to the rose. To fully suite by finish please refer to our Orbis Commercial Range brochure for details.

Fixed Rose Lever Option

7 www.laidlaw.net

Finishes

52Ø

Item no.

54 601.19 19Ø

As an alternative to the loose rose option, Orbis Classic Range also offers a fixed rose variant of the 19mm diameter 'return to door' lever mounted on a 5mm concealed fix rose. For complementary items to suite with this lever option please refer to our Centurion brochure.

134

Diameter (mm) 19

SS7 PS7

•

SA7

•

Unit pair

ORBIS CLASSIC - LEVER FURNITURE Finishes

Lever Handle - Curved Item no.

• Rounded section curved lever handle • Suitable for use with all rose or plate mountings (see pages 9-10) • 8mm spindle supplied • SS7 & PS7 finishes are Grade 316 stainless steel • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade)

54 833.22

Diameter (mm)

SS7 PS7

•

22 x 15

SA7

•

Unit pair

Specification advice Remember to specify roses or backplates for use with the lever (see pages 9 - 10)

22Ø 66

22Ø 15

Please note, all levers are supplied with "break through" type spindle for secure grub screw fixing.

131

Finishes

Lever Handle - Elliptical section Item no.

• Formed eliptical section ‘return to door’ lever handle • Suitable for use with all rose and plate mountings (see pages 9-10) • 8mm spindle supplied • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade) • Available in SA7 finish only

54 832.22

Diameter (mm)

SS7 PS7

22 x 12

SA7

•

Unit pair

Specification advice Remember to specify roses or backplates for use with the lever (see pages 9 - 10) 52

138

Finishes

Lever Handle - Scroll Item no. 54 834.22

SS7 PS7

•

SA7

Unit pair

Specification advice Remember to specify roses or backplates for use with the lever (see pages 9 - 10) 22Ø

• Round bar 'return to door' lever handle • Suitable for use with all rose or plate mountings (see pages 9-10) • 8mm spindle supplied • SS7 & PS7 finishes are Grade 316 stainless steel • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade) • Complies with BS8300 when used with 5mm thick roses or plates • Available in SS7 and PS7 only

Diameter (mm)

136

54 833.22 lever mounted on 50 800.6 concealed fix rose in SS7 finish

8 www.laidlaw.net

ORBIS CLASSIC - LEVER FURNITURE, ROSES & ESCUTCHEONS Finishes

Lever Rose - Concealed fixing • Low profile unsprung rose for use with all Orbis Classic levers • Phosphor bronze bearing washer for extra durability as standard • Nylon bearing washer packs available to order (see table opposite) • Supplied with M4 bolt through fixings for back to back assembly and optional face fixing screws • Snap on cover conceals fixings • Fixing centres (38mm) compatible with all major lockcase ranges • SS7 & PS7 finishes are Grade 316 stainless steel • Roses meet the requirements of BS8300 when used as a package with designated levers

Item no.

Size (mm)

50 800.6

52 x 5

SS7 PS7

•

SA7

•

Unit pair

Item no.

Description

50 800CW Nylon

Nylon bearing washer pack

Unit pair

50 800CW PB

Phosphor bronze bearing washer

pair

Specification advice Check lockcase springing is suitable for unsprung lever and rose furniture. Individual roses for half sets of levers are available to special order. For escape sashlock applications we recommend the use of a lever pre-fixed to the rose. Please refer to our Orbis Commercial brochure for details.

38ccs

Finishes

Escutcheons - Concealed fixing

51 800.0

• Suitable for use in conjunction with all Orbis Classic rose mounted lever handles or with pull handles • Snap on cover conceals fixings • Thumbturns complete with 5mm spindle and 8mm adapter suitable for door thicknesses from 35 to 54mm • Supplied with self-tapping screws for face fixing

51 800.1

51 800.4

51 800.2

51 800.3

51 800.5

51 800.15

Item no.

Function

51 800.0

blank

51 800.1

lever key

51 800.2

oval profile

51 800.3

euro profile

51 800.4

indicator/release

51 800.5

standard turn

51 800.15

large turn

51 800.25

extended turn

SS7 PS7

• • • • • • • •

SA7

• • • • • • • •

Unit single single single single single single single single

51 800.25

Specification advice Extended bathroom turn 51 800.25 is recommended for special needs applications. 60.5

9 www.laidlaw.net

ORBIS CLASSIC - LEVER FURNITURE BACKPLATES Backplates - Concealed fixing

50 800.5.7

50 800.4.7

• Suitable for use with all Orbis Classic and a range of Orbis Premier lever handle designs • Exceed BS EN 1906 grade 4 when used with Orbis Classic lever handles • Snap on cover conceals fixings • Bathroom turn and indicator options supplied with 5mm spindle and 8mm adapter suitable for door thicknesses from 35 to 54mm • Supplied with self-tapping screws for face fixing and with M4 bolt through fixings

50 800.15.7

Item no.

Function

50 800.0

blank

50 800.3.7

euro profile

50 800.4.7

indicator/release

50 800.5.7

standard turn

50 800.15.7

large turn

SS7 PS7

• • • • •

50 800.0

50 800.3.7

Item no.

Function

50 800.0

blank

50 800.3

euro profile

50 800.4

indicator/release

50 800.5

standard turn

50 800.15

large turn

SA7

• • • • •

Unit pair pair single single single

Finishes

57mm centre lockcases

SS7 PS7

• • • • •

SA7

• • • • •

Unit pair pair single single single

54 801.19 lever mounted on 50 800.3.7 backplate in SS7 finish

DDA Applications Backplates and escutcheons meet the requirements of BS8300 when used as a package with designated levers

57 / 78

57 / 72

180

Specification advice Make sure you select the correct backplate to suit the centres of the lock being used. To select a bathroom lock set, be sure to specify a turn and an indicator plate.

Finishes

72mm centre lockcases

Fixing Packs As standard all levers are supplied with FPL1.1 'Break Through' spindle and FPL1.1 back to back fixings for doors 38mm to 54mm thick and face fixing screws. Alternative fixing packs are available for thicker doors, for single sided applications or for use with locks which have a split follower function.

105 (FPL1.1) 120 (FPL1.2)

FPL1

Item no.

Description

Door Thickness

FPL1.1

'Break Through' spindle Back to back fixings bolts and face fixing woodscrews

38 - 54mm

FPL1.2

'Break Through' spindle Back to back fixings bolts and face fixing screws

55 - 65mm

FPL2.1

Swivel half spindle for single sided lever operation and face fixing woodscrews

38 - 54mm

FPL2.2

Swivel half spindle for single sided lever operation and face fixing woodscrews

55 - 65mm

FPL3.1

Split spindle Back to back fixings bolts and face fixing woodscrews

38 - 54mm

FPL3.2

Split spindle Back to back fixings bolts and face fixing woodscrews

55 - 65mm

FPL5.2

Adapter to convert 5mm bathroom spindle to suit 8mm follower

n/a

cut on site

Back to back fixing bolts

Face fixing screws 8

FPL2

105 (FPL1.1) 120 (FPL1.2)

FPL3 30

FPL5.2

10 www.laidlaw.net

ORBIS CLASSIC - PULL HANDLES Pull Handles - Curved Section

Item no.

Designed to be compatible with 54 833.22 lever handle design

Centres (mm)

•

Centres (mm)

SS7 PS7

300

53 833.30BB

•

Unit single

•

SA7

•

Unit pair

Specification advice Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a single bolt through pull handle, appropriate push plates are available for fixing to the push side of the door (see page 15)

300

22Ø

SA7

Finishes

Back to back fixing Item no.

SS7 PS7

300

53 833.30

• Bolt through or back to back fixing options • Standard M8 fixing packs suit doors up to 55mm thick - other thicknesses to special order • Alternative fixing types are also available (see page 14) Please note, these pull handles are also interchangeable with the pull handles and backplate system in the Orbis Premier range. For further details refer to the Orbis Premier Range brochure.

Finishes

Bolt through fixing

53 833.30

Pull Handles - Elliptical Section

53 832.13

Designed to be compatible with 54 832 lever handle design

53 832.28

Finishes

Bolt through fixing Item no.

• Bolt through or back to back fixing options • Choice of lengths available • Standard M8 fixing packs suit doors up to 55mm thick - other thicknesses to special order • Alternative fixing types are also available (see page 14) • Available in SA7 finish only

Centres (mm)

53 832.13

135

53 832.21

212

53 832.28

286

Item no.

centres

SS7 PS7

SA7

• • •

Unit single single single

Finishes

Back to back fixing

11 www.laidlaw.net

53 832.21

Centres (mm)

53 832.13BB

135

53 832.21BB

212

53 832.28BB

286

SS7 PS7

SA7

• • •

Unit pair pair pair

ORBIS CLASSIC - PULL HANDLES Pull Handles - Round Bar Section

Item no.

53 819.60

• Bolt through or back to back fixing options • Choice of lengths available • Choice of diameters available • Standard M8 fixing packs suit doors up to 55mm thick - other thicknesses to special order • Alternative fixing types are also available (see page 14)

53 819.45

53 819.24

Designed to be compatible with all round bar lever handle designs

53 819.30

Bolt through fixing

53 819.15

150

53 819.18

180

53 819.24

240

53 819.30

300

53 819.45

450

53 819.60

600

Back to back fixing Item no.

19Ø

SS7 PS7

• • • • • •

SA7

• • • • • •

Unit single single single single single single

Finishes

Diameter Centres (mm) (mm)

53 819.15 BB

150

53 819.18 BB

180

53 819.24 BB

240

53 819.30 BB

300

53 819.45 BB

450

53 819.60 BB

600

SS7 PS7

• • • • • •

SA7

• • • • • •

Unit pair pair pair pair pair pair

centres

Please note, these pull handles are also interchangeable with the pull handles and backplate system in the Orbis Premier range. For further details refer to the Orbis Premier Range brochure.

Finishes

Diameter Centres (mm) (mm)

Bolt through fixing

53 822.45

53 822.30

53 822.24

Item no.

Finishes

Diameter Centres (mm) (mm)

53 822.18

180

53 822.24

240

53 822.30

300

53 822.45

450

53 822.60

600

Back to back fixing Item no.

• Slimline rose • Concealed face fixings (included) • Suits all pull handle lengths • Available in all finishes 50 853.19.6 - For 19mm pull handles 50 853.22.6 - For 22mm pull handles

22Ø

• • • • •

SA7

• • • • •

Unit single single single single single

Finishes

Diameter Centres (mm) (mm)

53 822.18 BB

180

53 822.24 BB

240

53 822.30 BB

300

53 822.45 BB

450

53 822.60 BB

600

SS7 PS7

• • • • •

SA7

• • • • •

Unit pair pair pair pair pair

centres

A concealed fixing rose is available for surface mounting pull handles. Designed to be used with 19mm and 22mm round bar pull handles. The 52mm x 5mm rose mounting converts the pull handle to a concealed 'face fixed' pull.

SS7 PS7

Specification advice For compliance with DocM, we recommend the use of pull handles with 450mm centres or longer. Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a single bolt through pull handle, appropriate push plates are available for fixing to the push side of the door (see page 14)

12 www.laidlaw.net

ORBIS CLASSIC - PULL HANDLES

53 219.30

Ø 19

A 90

Centres 300

53 219.45

450

53 219.60

600

53 222.30

125

300

53 222.45

125

450

53 222.60

125

600

Ø 53 219.30BB 19 53 219.45BB 19

A 90

Centres 300

450

53 219.60BB 19 53 222.30BB 22

600

125

300

125

450

125

600

Item no.

A series of cranked round bar pull handles for single bolt through fixing or fixing back to back

Item no.

53 222.45BB 22 53 222.60BB 22

Item no.

A series of pillar fixed round bar pull handles for single bolt through fixing or back to back

53 332.1500

A 1500

C 1350

53 332.1800

1800

1650

Item no.

A 1000

SS/PS

• •

C 1350

SS/PS

53 332.1500BB

A 1500

53 332.1800BB

1800

1650

Item no.

• • • • • •

SS/PS

53 325.1000BB

Unit single single single single single single

A 1000

• • • • • •

Unit pair pair pair pair pair pair

• •

Unit single single

•

Unit single

• •

Unit pair pair

Finishes

Back to Back - 25mm Ø Item no.

• • • • • •

Finishes

Back to Back - 32mm Ø

Special Lengths Special length pull handles can be supplied. Please contact your Laidlaw Technical consultant for further details.

SS/PS

C 850

53 325.1000

Finishes

Bolt Through - 25mm Ø

• Supplied complete with fixings to suit timber doors • Available in 32mm and 25mm diameters • SS & PS finishes are Grade 316 • Spare bolt through fixing packs are available (see below)

• • • • • •

Finishes

Bolt Through - 32mm Ø

Entrance Pull Handles

SS/PS

Finishes

Back to Back

centres

• Supplied complete with fixings to suit timber doors • Available in 19mm and 22mm diameters • For push/pull applications select an appropriate push plate for the other side of the door (see page 15 for further details) • SS & PS finishes are Grade 316 • Spare bolt through fixing packs are available (see below)

Finishes

Bolt Through

Pull Handles - Cranked

C 850

SS/PS

•

Unit pair

Bolt Through Fixing Packs Item no. LA158.19 LA158.22

13 www.laidlaw.net

Description M6 bolt pack for 19mm pulls (SS & PS only) M8 bolt pack for all 22mm, 25mm & 32mm diameter pulls & 19mm pulls in SA finish

ORBIS CLASSIC - PUSH PLATES, KICKING PLATES & FIXINGS Push Plates

Finishes

Designed to be used on the push side of the door with a bolt through or concealed rose fixed pull handle on the pull side. Push plate is used to conceal the bolt through pull handle fixing.

corners

Size (mm)

52 801

radius

350 x 100

52 802

square

350 x 100

52 803

radius

500 x 100

52 804

square

500 x 100

52 805

radius

650 x 100

52 806

square

650 x 100

Item no.

• Square or radiused corners • Supplied with screw fixings • Suits bolt through handles up to 600mm centres

SS7 PS7

• • • • • •

SA7

• • • • • •

Unit single single single single single single

Kicking & Mid Rail Plates Kicking & mid rail plates must be ordered to suit the height and width required. Special designs are also available to order. Plates are supplied with selftapping wood screws.

Pull Handle Fixings Bolt through Orbis Classic 53 800 Series handles in all finishes are supplied as standard with fixings FPP3.5 and back to back handles are supplied with fixing pack FPP5.2. Alternative sizes and fixing types are also available as shown in the table below.

FPP1

Secret face fixing for timber doors with threaded plugs and M8 fixing bolts.

FPP5

Use one Thread side & one Pin side pull handle.

Use with Pin side pull handles only Pin side

FPP2.1

Pin side

Concealed rose face fixing (roses not included with fixing pack)

Back to back fixing for timber doors with M8 bolt.

FPP6.3

FPP5.2 FPP5.3

40 - 55mm doors 35mm doors

Back to back fixing for glass doors with M8 bolt, 13mmØ nylon bush and washers. Use one Thread side & one Pin side pull handle. Suitable for glass 10 - 14mm thick

Pin side

Thread side

FPP3

Thread side

Bolt through fixing for timber doors with CSK M8 bolts. FPP3.2 FPP3.3 FPP3.5

40 - 55mm doors 35mm doors 55 - 65mm doors

FPP7.3

Clearance hole in glass 14mmØ Bolt through fixing for glass doors with M8 'Pig nosed' bolt. Use with Thread side pull handles only Suitable for glass 10 - 14mm thick

Thread side

Clearance hole in glass 14mmØ 14 www.laidlaw.net

ORBIS CLASSIC - OVERHEAD DOOR CLOSERS Door Closers - Smoothline Orbis Classic Smoothline closers have been developed to provide high performance and a distinctive form, compatible with the Orbis Classic furniture • Fixed power and adjustable power units available • Fully compliant with BS EN 1154 • CE marked • Fully adjustable for closing speed and latch action • Hold-open, delayed action and backcheck facility available • Each unit supplied with brackets suitable for universal mounting (fig.1, fig.66 or fig.61 applications) • 31 806.30 slide track version suitable for mounting on pull or push side of the door or transom mounted (not illustrated) • Fully fire tested to BS EN 1634 and suitable for use on fire doors up to 2hr rating

31 806

31 803

Electromagnetic Hold-Open Designed for use on fire/smoke doors. The unit is controlled by the building fire/smoke detector and alarm system. On operation of the alarm, the track mounted holdopen facility is released and the door closes in the normal manner • Adjustable power 3 - 4 • Fully compliant with BS EN 1154 and BS EN 1155 • CE marked • Fully adjustable for closing speed and latch action • Slide track suitable for mounting on pull or push side of the door or transom mounted • Fully fire tested to BS EN 1634 and suitable for use on fire doors up to 2hr rating • 2 year electrical guarantee

Electrical requirements Operating voltage - 24v AC/DC (+10% - 15%) at 90mA max.

15 www.laidlaw.net

27 865

Opening and closing forces In order to show compliance with requirements for accessibility, the force needed to open the door, measured at the leading edge, from 0˚ must be less than 30N (see page 43 for further information). The size of the door, the accuracy of installation of the hardware, the presence of smoke or draught seals, the need to latch the door, the location of the door will all have a bearing on the force required to open it and as a consequence it may not be possible to provide a definitive statement as to which closers do or do not meet the opening force requirements of the regulations. For guidance purposes we have indicated in the chart opposite those closers which can in principle meet the opening force criteria for accessibility and also the closing force criteria for fire doors. Due to the principles of leverage, the door width is critical in assessing the relevant opening/closing forces. The chart indicates the minimum door leaf width that is possible to achieve the necessary opening force. The maximum leaf width may be governed by the maximum closer power in accordance with BS EN 1154.

Materials and construction The Orbis Classic Smoothline fixed power units have die cast aluminium mechanisms with die cast zinc covers and steel arms & brackets. 31 806 Smoothline adjustable mechanisms are cast iron. Finishes Smoothline closers have electrophoretic finishes with arms and brackets to match. ESS - Electrophoretic Satin Stainless (to match SS7) EPS - Electrophoretic Polished Stainless (to match PS7) ESA - Electrophoretic Silk Anodised Aluminium (to match SA7) In addition, a range of colour coated and sprayed metallic finishes complete with matching arms and brackets are available to special order.

ORBIS CLASSIC - OVERHEAD DOOR CLOSERS

337

BS EN 1154 Power size

576

min. projection 44

max. projection 10

40kg

60kg

80kg

100kg

120kg

1400mm

1250mm

Hold-Open closers The use of mechanical hold-open closers is NOT PERMITTED on fire door applications.

min. 57

min. 48

min. 41 min. 70

20kg

Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig.1 applications) only. Door sizes may vary for BS EN 1155 (see chart on page 22).

76 337

1100mm

Door width (mm) Door weight (kg)

950mm

850mm

294

750mm

Specification advice Fixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions - variables that may be unknown at the time of specification. Specifying an adjustable closer can therefore help to avoid installing an under-powered or over-powered unit.

min. projection 32

BS EN Classifications Orbis Commercial Smoothline closers have been fully tested to the requirements of BS EN 1154 (and BS EN 1155 where applicable) and have been designated with the Classification no. as shown below. Digit 3 applies to power size and depends on the closer specified.

min. 127

min. 80

max. projection 70

4 8 3 1 1 3 4 8 Features & Functions

Item no.

31 806

31 816

31 826

31 836

27 865

1-4

2-6

2-5

2-6

3-4

spring

BS EN 1154 compliant

•

BS EN 1155 compliant

n/a

•

Power size (see chart above) Fixed power or spring power adjustable

31 803V 31 813V

•

Min. door width (mm)

875

850

Max. door width (mm)

1100

1400

1250

1400

1100

Grade of opening angle (see note #)

Adjustable closing speed

•

Adjustable latch action

•

Adjustable back check

•

Adjustable delayed closing action

•

Electromagnetic hold-open track

•

Hold open armset (non fire doors only)

•

Fire tested to EN 1634 - 2 hr

•

CE Marked

2-6

1 1 3

* no min. door size limits for electromagnetic hold open closer # Grade 4 will close a door from 180˚ opening angle Grade 3 will close a door from 105˚ opening angle

16 www.laidlaw.net

ORBIS CLASSIC - OVERHEAD DOOR CLOSERS Door Closers - Softline Orbis Commercial Softline closers are high specification adjustable power closers which have clean and simple lines, ideally suited for use with Orbis Commercial round bar lever furniture • Adjustable power units • Fully compliant with BS EN 1154 where stated • CE marked • Fully adjustable for closing speed and latch action • Hold-open and backcheck facility available • Each unit supplied with brackets suitable for fig.1 and fig.66 applications • Fully fire tested to BS EN 1634 and suitable for use on timber fire doors up to 2 hr rating, • 31 800 & 31 810 - no power reduction in fig.1 or 66 applications • 2 year guarantee

31 807.30

31 800

31 808

Materials and construction The Orbis Commercial Softline closers have cast aluminium bodies with steel covers, arms and brackets. Finishes Softline closers have electrophoretic finishes with arms and brackets/track to match. ESS - Electrophoretic Satin Stainless (to match SS7) EPS - Electrophoretic Polished Stainless (to match PS7) ESA - Electrophoretic Silk Anodised Aluminium (to match SA7)

Electromagnetic Controls Designed for use on fire/smoke doors. The unit is controlled by the building fire/smoke detector and alarm system. On operation of the alarm, the integral hold-open mechanism is released and the door closes in the normal manner • Fixed power variants • Fully compliant with BS EN 1154 and BS EN 1155 where stated • CE marked • Fully adjustable for closing speed and latch action • Available in projecting arm and track arm configurations • Fully fire tested to BS EN 1634 and suitable for use on fire doors up to 2hr rating • 2 year guarantee Electrical requirements Operating voltage - 24v DC (+10% - 15%) at 2W max. with the exception of 27 894.30 (3.4W max.)

17 www.laidlaw.net

27 894.30

27 854

Operating Modes Fixed strength models are site selectable for either 'hold-open' or 'swing-free' operation. Hold open angle is available from 75˚ up to 105˚. The 'swing-free' facility allows the door to operate as if no closer were fitted. When the power to the closer is cut, or in the event of alarm activation, the closer is re-activated and closes the door. Materials and construction The Softline electromagnetic closers have extruded aluminium bodies with covers, arms and brackets in steel.

DDA applications Both operating modes of the electromagnetic door control facilitate access and are specifically recommended in the Building Regulations as a means of satisfying the opening force requirements.

ORBIS CLASSIC - OVERHEAD DOOR CLOSERS

491

BS EN 1154 Power size

302

20kg

40kg

60kg

80kg

100kg

120kg

1400mm

1250mm

1100mm

Door width (mm) Door weight (kg)

31 808 31 818

950mm

251

750mm

31 800 31 807 31 810 31 817

850mm

31 807.30

Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig.1 applications) only.

251

max. projection 25

Hold-Open closers The use of mechanical hold-open closers is NOT PERMITTED on fire door applications.

94mm - 31 800; 31 807 112mm - 31 808 130mm - 31 800; 31 807 136mm - 31 808

BS EN Classifications Orbis Classic Softline closers have been fully tested to the requirements of BS EN 1154 and have been designated with the Classification no. as shown above. Digit 3 applies to power size and depends on the closer specified.

fig. 1 fig. 66

94mm - 31 800; 31 807 112mm - 31 808

3 8 fig. 61

Mechanical Controls Item no.

Electromagnetic Controls

31 817 31 807.30 31 808

31 800

31 810

31 807

2-4

Fixed power or spring power adjustable

fixed**

spring

Addition of template adjustable option**

•

n/a

BS EN 1154 compliant & CE Marked

•

BS EN 1155 compliant & CE Marked

Projecting arm (P) or Track arm (T)

Electromagnetic hold-open Electromagnetic swing-free

Power size (see chart above)

1 1 3

Insert power size into Classification number

fig. 30 slide track

Features & Functions

2-4

31 818

27 853

27 854

27 855

2-5

27 893.30 27 894.30 3

1-4

spring

n/a

spring

fixed

spring

n/a

•

Grade of opening angle (see note #)

Adjustable closing speed

•

Adjustable latch action

•

Adjustable back check

•

Hold open armset

•

Fire tested to EN 1634 - 2 hr

•

** by altering the mounting position of the closer, the closing strength can be adjusted # Grade 4 will close a door from 180˚ opening angle. Grade 3 will close a door from 105˚ opening angle

18 www.laidlaw.net

ORBIS CLASSIC - OVERHEAD DOOR CLOSERS Door Closers Orbis Classic 31 700 Series is a comprehensive range of trimplate and covered options • Adjustable and fixed power units • Fully compliant with BS EN 1154 • CE marked • Fully adjustable for closing speed and latch action • Hold-open and backcheck facility available • Projecting arm and slide track variants • Fully fire tested to BS EN 1634 and suitable for use on timber fire doors up to 2 hr rating, • 2 year guarantee

31 700

31 736

Note: The use of mechanical holdopen closers is NOT PERMITTED on fire door applications. Features & Functions

Item no.

31 703V

31 701.30

31 706

31 716

31 726

31 736 31 703.30

31 700

31 710

31 701

31 711

31 702

31 712

31 701.30

1-4

2-6

2-5

2-6

2 - 4*

2-4

2-5

Power adjustment type or fixed power

spring

fixed

spring

fixed

Trimplate or All-over cover

Cover

Trim.

BS EN 1154 compliant

•

Projecting arm (P) or Slide Track (T)

Power size (see chart page 18)

31 703V 31 713V

position position spring

Grade of opening angle (see note #)

Adjustable closing speed

•

Adjustable latch action

•

Adjustable back check

•

Adjustable delayed closing action

•

Hold-open armset

•

Fire tested to EN 1634 - 2 hr timber door

•

CE Marked

•

Certifire Approved

•

* Test evidence gained in Power size 3 # Grade 4 will close a door from 180˚ opening angle. Grade 3 will close a door from 105˚ opening angle

31 703V closer is a high efficiency closer capable of meeting the closing force requirements of EN1154 for door applications and the maximum opening force requirements for DDA applications (See also note on page 15)

31 703V - 31 736

48 (31 703 & 31 713) 55 (all others)

249 (31 703 & 31 713) 310 (all others)

59 (31 703 & 31 713) 66 (all others)

Power sizes See power size chart on page 18. The dimensions stated in the chart relate to closers mounted on the pull side of the door (fig.1 applications) only. BS EN Classifications Orbis Classic 31 700 Series closers have been fully tested to the requirements of BS EN 1154 and have been designated with the Classification no. as shown below. Digit 3 applies to power size and depends on the closer specified.

31 700 - 31 712

62 (31 702 & 31 712) 61 (all others)

4 8 53 (31 702 & 31 712) 42 (all others)

19 www.laidlaw.net

283 (31 702 & 31 712) 232 (all others)

2-4

1 1 3 Insert power size into Classification number

ORBIS CLASSIC - CONCEALED DOOR CLOSERS Door Closers - Concealed 31 133

A series of concealed and semi concealed overhead door closers for mounting in the top edge of the door. Suitable for all types of single action internal doors with a minimum thickness of 44mm • Fixed power size 3 • Fully concealed and semi concealed versions • Fully compliant with ANSI standard A156.4 Grade 1 having undergone 2 million test cycles • Fully adjustable for closing speed and latch action • Hold-open and backcheck facility available • Available with intumescent pack for use on fire doors up to 1 hr fire rating (see chart below)

Features & Functions

Item no.

31 333

31 033

31 133

31 133.1

31 333

31 333.1

31 033

31 033.1

Fixed power size (see chart opposite)

ANSI A156.4 compliant

•

CE marked (when used on 54mm thick door)

•

Grade of opening angle (see note #)

Adjustable closing speed

•

Adjustable latch action

•

Adjustable back check

•

Slide track mounted in head frame

•

Visible parallel arm and soffit bracket

•

Visible regular projecting arm

•

Hold open armset

•

Suitable for pull side of the door

•

Suitable for push side of the door

•

Fire rating (using intumescent pack) 1 hr

•

Power sizes All Orbis Classic concealed closers are fixed power size 3, suitable for doors up to 950mm wide. See chart opposite. Closers suitable for doors up to 1200mm wide are available to special order. Please contact your Laidlaw Technical Consultant for further information.

Specification advice Concealed closers are handed and must be specified to suit left or right hand doors.

# Grade 4 will close a door from 180˚ opening angle. Grade 3 will close a door from 105˚ opening angle

Clockwise closing Left hand ISO. 5.0

Anti-clockwise closing Right hand ISO. 6.0

20 www.laidlaw.net

ORBIS CLASSIC - FIRE DOOR CONTROLS Finish

Electromagnetic Door Holders Wall and floor mounted electromagnetic door holders are used in conjunction with either an overhead door closer or floor spring. When connected to the building fire/smoke detection and alarm system they will allow a fire door in a high traffic location, such as a corridor, to be held open during normal use. In an emergency situation the holder is de-activated and the door closes under the action of the door closer. The door can always be pulled manually off hold open to allow the door to close. • Fully compliant with BS EN 1155 • CE Marked • Surface or semi recessed wall mounting • Built-in test button to simulate alarm conditions • Floor mounting bracket option • Max. holding force 200 Newtons • 2 year electrical guarantee

Item no.

27 533.1

27 533

27 533 FMB

Description

27 533

wall mounted - semi recessed

27 533.1

surface mounting case for use with 27 533

27 533FMB

floor mounting bracket

SS PCP

•

• •

Specification advice The hold-open device should be sited at the same level as the closing device (or as close as practical) to minimise the stress placed on the door whilst it is being held open. A skirting mounted hold-open unit used in conjunction with an overhead door closer could induce the door to twist, causing the door to fail to close fully. 86

Power for the electromagnet must not be drawn from the fire alarm system except in alarm condition. A separate power supply is designed specifically for the electromagnetic units (see below).

BS EN Classifications Orbis electromagnetic hold-open units have been fully tested to the requirements of BS EN 1155 and have been designated with the Classification no. as shown below.

3 5

3-6

1 1 3

Electrical requirements Operating voltage - 24vDC (22v min / 30v max.) - 50mA nominal A series of transformer/rectifiers with facilities for plug in relays are available to power single or multiple units. Transformer/rectifier Item no. 27 114

For hold-open units 27 533 & 27 534

Max. no of units 4

27 120

27 533 & 27 534

27 150

27 533 & 27 534

Finishes Orbis electromagnetic hold-open units are available in applied finishes. SS and PCP are electro plated to match SS7 and PS7. The SE finish is a sprayed silver finish to suite with SA7 products.

21 www.laidlaw.net

ORBIS CLASSIC - ELECTROMAGNETIC DOOR CLOSERS Door Closers - Electromagnetic DDA applications Both operating modes of the electromagnetic door control facilitate access and are specifically recommended in the Building Regulations as a means of satisfying the opening force requirements.

Dual function electromagnetic door with site selectable 'hold-open' or 'swing-free' operation. The units incorporate an electromagnet which is controlled by the building fire/smoke detection and alarm system. In general operation, the door can be allowed to swing free of the door closer or be held in the open position, typically in a high traffic location. On activation of the fire/smoke detection system the electromagnet will be deactivated and the door will close under normal closer power

Features & Functions

Item no.

BS EN 1155 Power size

• Fixed power sizes 3 to 5 • Fully compliant with BS EN 1154 and BS EN 1155 • CE Marked • Fully adjustable for closing speed and latch action • Hold-open and swing-free selectable on installation • Adjustable hold open position • Versions suitable for mounting in fig.1, fig.61 or fig.66 applications • 2 year guarantee 27 163

27 164

27 165

27 663

27 664

27 665

27 765

3-4

Fixed power size (see chart above)

fig1. & 61 fig1. & 61 fig1. & 61

fig.66

fig1. & 61

Grade of opening angle (see note #)

Adjustable closing speed

•

Adjustable latch action

•

Adjustable backcheck

•

Electromagnetic swing-free

•

Electromagnetic hold-open

•

Mounting options

85˚ - 95˚ (fig.1) 103˚ - 110˚ (fig.1)

Hold-open angle adjustment

65˚ - 85˚ (fig.66) 90˚ - 105˚˚ (fig.66)

85˚ - 95˚ (fig.61) Fire tested EN1634 on timber door - 2hr

•

# Grade 3 will close a door from 105˚ opening angle

58 - min. top rail depth

98 min

305

80kg

100kg

120kg

1400mm

3 8 4 1 1 3 BS EN Classifications Orbis electromagnetic closers have been fully tested to the requirements of BS EN 1154 and BS EN 1155 and have been designated with the Classification no. as shown above. Digit 3 applies to power size and depends on the closer specified. Electrical requirements Operating voltage - 24vDC (22v min / 30v max.) - 90mA nominal A series of transformer/rectifiers with facilities for plug in relays are available to power single or multiple units.

Item no.

60kg

Transformer/rectifier 20/30*

1250mm

Door width (mm) Door weight (kg)

1100mm

27 163

950mm

Power sizes All units are fixed power sizes from size 3 to size 5 (see chart below). The door sizes given are related to mounting in fig.1 application.

* max. projection for swing free applications is 20mm. max. projection for hold-open applications is 30mm

27 114

(all) 27 163 - 27 665

closers suitable

max. no of units 3

27 120

(all) 27 163 - 27 665

27 150

(all) 27 163 - 27 665

Finishes Available in a wide range of coloured and metallic finishes. SS - Satin Stainless PS - Polished Stainless PB - Polished Brass ESA - Electro Satin Aluminium SA - Satin Aluminium PA - Polished Aluminium SE - Sprayed Silver GE - Sprayed Gold BE - Sprayed Brown Plus the full range of coloured finishes shown on page 39.

370 min. opening

22 www.laidlaw.net

ORBIS CLASSIC - FLOOR SPRINGS Floor Springs A series of floor springs is available offering a high level of sophisticated door control specifically for high traffic locations. The range includes a wide selection of accessories to suit timber, metal and glass doors. • Fixed power sizes 3 to 6 suitable for doors up to 300kg • Variable power unit, size 1 - 4 • Fully compliant with BS EN 1154 and BS EN 1155 where stated • CE Marked • Certifire Approved (cert. no. 128) • Fully adjustable for closing speed and latch action • Adjustable backcheck • Single action and double action • Complete with cement box • 2 year guarantee

Clockwise closing Left hand ISO. 5.0

Anti-clockwise closing Right hand ISO. 6.0

Electromagnetic Option Electromagnetic hold-open and free-swing versions are available. When connected to the building fire alarm/detection system, the door can be allowed to swing free or be held open in high traffic locations. On activation of the fire/smoke detection system the electromagnet will be deactivated and the door will close under normal spring power. The hold open position is adjustable between 75˚ and 180˚. Electromagnetic versions conform to EN 1155. Complete with plug connector for 24V supply. Electrical requirements Operating voltage 24vDC + 15%, residual ripple max. 30% Power input 2.3W

30 863/DA 30 864/DA 30 866/DA

30 864/F 30 865/F 30 866/F

30 764 30 764/DA 30 764/HO

30 864/HO 30 865/HO 30 866/HO

30 864/FS 30 865/FS 30 866/FS

3/4/6

4/5/6

1-4

4/5/6

fixed

spring

fixed

BS EN 1154 compliant & CE Marked

•

BS EN 1155 compliant & CE Marked

•

Certifire Approved for fire doors

•

Grade of opening angle (see note #)

Adjustable closing speed

•

Adjustable latch action (15˚ - 0˚)

•

Adjustable back check

•

Adjustable delayed closing action

•

30 764/DA

Mechanical hold-open

•

30 764/HO

Electromagnetic hold-open

•

Features & Functions

Item no.

Power size (see note below) * Fixed power or spring power adjustable

Electromagnetic swing-free Max. leaf weight (kg)

•

300

120

300

# Grade 4 will close a door from 180˚ opening angle

Power size * With the exception of the 30 764 model, the Orbis Classic floorsprings are fixed power units and must be ordered to suit each application. Use the product reference from the chart above according to the power size required. For example, a 30 863/DA is power size 3; a 30 864/DA is power size 4; and 30 866/DA is power size 6.

23 www.laidlaw.net

all others

285

341

308

358

105

20kg

40kg

60kg

80kg

100kg

120kg

1400mm

1250mm

1100mm

950mm

30 764

BS EN 1154 Power size

Dimensions (mm)

850mm

Door width (mm) Door weight (kg)

750mm

ORBIS CLASSIC - FLOOR SPRINGS

Power sizes Orbis floorsprings are fixed power (except 30 764 which is adjustable power). Please contact your Laidlaw Technical Consultant for further information.

Accessories for single action doors

Accessories for double action doors 56

51 min.

29 013 29 011 56

29 012

235

29 010

Accessories A wide range of accessories is available for use with the Orbis Classic range of floorsprings. The selection of appropriate accessories relates to the type of door and the use of single action or double action doors. For glass door fittings and additional accessories for metal, glass or timber doors please contact your Laidlaw Technical Consultant for further advice.

Accessories for single action doors Item no.

Description

Finish

29 012

Door strap for bottom of door - suitable for flush doors

Zinc plated

29 013

Top centre with eccentric pin. Suitable for flush doors - non handed

Zinc plated

29 016/L

Cover cap for single door strap - Left Hand

Mill Finish

29 016/R

Cover cap for single door strap - Right Hand

Mill Finish

29 017

Double cover caps for top centres

Mill Finish

Accessories for double action doors Item no.

Description

Finish

29 010

Door strap for bottom of door

Zinc plated

29 011

Adjustable top centre c/w frame and door portion

Steel

24 www.laidlaw.net

ORBIS CLASSIC - HINGES Ball Bearing Hinges

37 801.1

Radiused corner hinges

37 800.1

• Ball bearing hinge • Exceed BS EN 1935 grade 13 suitable for doors up to 120kg (Weight based on 3 hinges per door leaf) • Tested to BS7352 class 13 • Radiused and square corner versions • Stainless steel versions are Grade 304 • Supplied with 32mm x No.10 pozidrive stainless steel woodscrews • Machine screws available on request for metal doors/frames • Security stud option

Size (mm)

37 800.1

102 x 76mm

37 801.1

102 x 102mm

37 810.1

102 x 76mm with stud

10mmR

102

10mmR

37 800.2

2.5

102

2.5

Rising Butt Hinges 37 879.5

37 879.6

Item no.

Size (mm)

37 800.2

102 x 76mm

37 801.2

102 x 102mm

32 810.2

102 x 76mm with stud

SA7

Unit single single single

SS7 PS7

• • •

SA7

Unit single single single

Specification advice Ball bearing hinges are suitable for all types of internal and external applications. When used on fire doors, intumescent packs need to be specified IP H1 - to suit 76 x 102mm hinges IP H2 - to suit 102 x 102mm hinges Note: Each hinge pack contains intumescent material for a pair and a half of hinges. For 30 min. fire door applications specify 1 intumescent pack per pair and a half of hinges. For 60 min. fire door applications specify 2 intumescent packs per pair and a half of hinges.

Finishes

Rising butt hinges Item no.

Handing

37 879.5

CW closing

37 879.6

ACW closing

Clockwise closing Left hand ISO. 5.0

SSS

• •

Anti-clockwise closing Right hand ISO. 6.0

102

Finishes SSS - Satin Stainless Steel

25 www.laidlaw.net

• • •

Finishes

Square corner hinges

37 810.2

• Rising butt hinges suitable for light internal doors, providing a soft 'self closing' action • Must be specified as Clockwise Closing (CW) or Anti-Clockwise Closing (ACW) • Stainless steel versions are Grade 304 • Supplied with 32mm x No.10 pozidrive zinc plated woodscrews • Maximum adjusted door weight 60kg • 2 hinges per leaf recommended • Require regular maintenance • 1 year guarantee

Item no.

Finishes SS7 PS7

Unit single single

ORBIS CLASSIC - MORTICE CYLINDER LOCKCASES Euro Profile Mortice Lockcases

Finishes

Radiused forend

An integrated series of modular euro profile cylinder mortice lockcases designed to meet the requirements of BS EN 12209

10 861

11 861R

• Precision manufactured slimline case with 6 function variants • Modular design allows interchangeability of lock models • Meets the requirements of BS EN12209 and with the dimensional characteristics of DIN18251 • 60mm backset (escape sashlock 55mm) & 72/78mm centres • Patented spring clip follower retains the lever spindle for a firm positive assembly • Bolt through fixings at lever and cylinder positions • 20mm double throw deadbolt • Quick reversible latchbolt without opening the lockcase • Springing suitable for unsprung lever furniture • Cylinder operates deadbolt and latchbolt • 2 part forend in grade 304 stainless steel with matching strike plate • Radiused or square forend styles • Meets BS 8300 dimensional recommendations making it suitable for DDA applications • Rebate kits available for square forend locks only, see below

11 862R

Item no.

Function

13 861R

latch only

11 861R

sashlock

12 861R

deadlock

13 862R

bathroom lock

10 861R

nightlatch

11 862R

escape sashlock

SS7

• • • • • •

SA7

Unit single single single single single single

Finishes

Square ended forend Item no.

Function

13 861

latch only

11 861

sashlock

12 861

deadlock

13 862

bathroom lock

10 861

nightlatch

11 862

escape sashlock

SS7

• • • • • •

SA7

Unit single single single single single single

Specification advice Escape sashlocks 11 862 & 11 862R have split followers and require the use of lever handles with split spindles. Please specify suitable spindle (see page 10) When used on fire doors, intumescent packs need to be specified IP L1 - For all Orbis Commercial European style lockcases except 11 862 & 11 862R IP L2 - For 11 862 & 11 862R Orbis Commercial European style lockcases For 30 min fire door applications specify 1 pack per lockcase. For 60 min fire door applications specify 2 packs per lockcase.

165

21,5 35

45 32

195

165

235

21,5

235

11 861R - sashlock

Rebate Sets for Cylinder Locks

Rebate Kits

Used to convert the meeting stiles of rebated double doors so that the standard mortice lock can be used.

Lock ref:

• 13mm and 25mm rebate depths • Strike plates produced in Grade 316 stainless steel • Suitable for square forend locks only

13mm rebate

25mm rebate

13 861

08 865

08 864

11 861

08 863

08 862

12 861

08 867

08 866

13 862

08 863

08 862

10 861

08 861

08 860

11 862

08 863

08 862

26 www.laidlaw.net

ORBIS CLASSIC - MORTICE CYLINDER LOCKCASES Dual Profile Mortice Lockcases

Finishes

Radiused forend

An integrated series of modular cylinder mortice lockcases which are suitable for use with oval or euro profile cylinders • Designed to meet the requirements of BS EN 12209 • Modular design allows interchangeability of lock models • 57mm backset • Bolt through fixings at lever and cylinder positions at 38mm centres (excluding nightlatch) • Single throw deadbolt with saw resistant rotating steel pins • Quick reversible latchbolt without opening the lockcase • Springing suitable for unsprung lever furniture • Patented adjustable spring tension allows fine tuning of the lock springing to suit heavier or drooping levers • 2 part forend in grade 316 stainless steel with matching strike plate • Optional radiused or square forend styles • Suitable for use with 56mm centres oval profile or 57mm centres euro profile cylinders • Nightlatch has anti-thrust and hold-back functions • Rebate kits available for square forend locks only

12 851

11 851 11 851

Item no.

Function

13 851R

latch only

SS7

11 851R

sashlock

12 851R

deadlock

13 852R

bathroom lock

10 851R

nightlatch

• • • • •

SA7

single single single single

Finishes

Square ended forend Item no.

Function

13 851

latch only

SS7

11 851

sashlock

12 851

deadlock

13 852

bathroom lock

10 851

nightlatch

• • • • •

SA7

single single single single

Rebate Kits 13mm rebate

25mm rebate

13 851

08 855

08 854

11 851

08 853

08 852

12 851

08 857

08 856

13 852

08 853

08 852

10 851

08 851

08 850

Lock ref:

57 76

108

146

165

108

56/57

27 www.laidlaw.net

Unit single

Specification advice Please note that a conversion plate is fitted to the lockcase suitable for euro profile cylinders. The plate must be removed for use with oval profile cylinders.

12 851 - deadlock

Unit single

ORBIS CLASSIC - MORTICE CYLINDER LOCKCASES 25

Dual Profile Mortice Lockcases A series of Euro profile and oval profile mortice cylinder lockcases, lever lockcases and latches.

14 16

13 701 Horizontal locks Item no.

Function / Description

11 702.3

Euro profile cylinder sashlock

Forend Square

11 702.2

Oval profile cylinder sashlock

Square

11 702

3 lever sashlock

Square

For radiused forend locks use Suffix R - e.g 11 702.2R 12 723.3

11 706.2 13 712

Rebate Kits

13mm rebate

Lock ref:

07 110.13 07 110.25

11 701; 11 706*; 13 702; 13 714

07 112.13 07 112.25

12 718; 12 731; 13 712

07 114.13 07 114.25

11 702

07 116.13 07 116.25

12 723R; 12 731R; 12 751R*

07 110.13R 07 110.25R

11 701R; 11 706R*; 13 702R; 13 714R 07 112.13R 07 112.25R

Function / Description Euro profile cylinder sashlock

Forend Square

Case depth 63, 76, 101mm

12 751.3

Euro profile cylinder deadlock

Square

63, 76, 101mm

12 723.3

Euro profile escape deadlock

Square

76, 101mm

13 702

Latch

Square

63, 76, 101mm

11 706.2

Oval profile cylinder sashlock

Square

63, 76, 101mm

12 751.2

Oval profile cylinder deadlock

Square

63, 76, 101mm

12 723.2

Oval profile escape deadlock

Square

76, 101mm

13 714

Bathroom lock 5mm spindle

Square

63, 76, 101mm

13 714

Bathroom lock 8mm spindle

Square

63, 76, 101mm

07 114.13R 07 114.25R

11 702R

07 116.13R 07 116.25R

* Note: the rebate kit is appropriate for all case depth variants of the relevant lock cases and for all follower size variants in the case of bathroom locks Small Case locks 25

63/76/101

152

Item no. 11 706.3

12 718R; 12 731R; 13 712R

43/57/80

For radiused forend locks use Suffix R - e.g 11 706.2R 25

25mm rebate

12 723; 12 731; 12 751*

152

11 706.2

11 701

12 751.3

Full Case locks

101

152

43/57/80

152

Full Case locks 63/76/101

11 702

11 702.3

• Designed to meet the requirements of BS EN 12209 • Various backset options • Common case sizes across a range of functions • Bolt through furniture fixings at 38mm centres (excluding nightlatch) • Single throw brass deadbolt and brass latchbolt • Quick reversible latchbolt without opening the lockcase • Springing suitable for unsprung lever furniture • 2 part forend with forend covers available in Satin Stainless steel or Satin Chrome finish with matching strike plate • Optional radiused or square forend styles • Suitable for use with oval or euro profile cylinders • Rebate kits available for square and radiused forend locks

151

12 731

63/76/101

11 701

3 Lever sashlock

Square

63, 76, 101mm

12 731

3 Lever deadlock

Square

63, 76, 101mm

25 25

63/76/101

Small Case locks

43/57/80

11 706.3

63/76/101

152

108

For radiused forend locks use Suffix R - e.g 11 701R

Item no.

Function / Description

12 731

3 Lever deadlock

Forend Square

Case depth 63, 76, 101mm

13 701

Latch

Square

63, 76, 101mm

13 712

Bathroom deadlock 5mm spindle

Square

63, 76, 101mm

13 712

Bathroom deadlock 8mm spindle

Square

63, 76, 101mm

13 701 43/57/80 25

63/76/101

Item no.

Function / Description

12 718.3

Euro profile clawbolt deadbolt

Forend Square

Case depth 76, 101mm

152

108

Sliding door locks

152

For radiused forend locks use Suffix R - e.g 13 701R

13 712

For radiused forend locks use Suffix R - e.g 12 718.3R 43/57/80

43/57/80

13 714

28 www.laidlaw.net

ORBIS CLASSIC - CYLINDERS Cylinders Suitable for use with all Orbis Classic cylinder mortice lock cases • Patented 6 pin security until December 2014 • EN 1303 Grade 6 Key security • EN 1303 Grade 6 Durability • EN 1303 Grade 2 Attack Resistance (when used with a 01 810 security escutcheon) • Unique raised plug with slotted face • Improved key strength • Patented key blanks are restricted for greater key control and security • Euro profile, oval profile, rim and rim mortice cylinders available • Range of euro and oval profile cylinder lengths • Available as masterkeyed or standard differ variants. Supplied with 2 differ keys • Available in satin nickel and polished chrome to match SS7 and PS7 finishes • 2 year guarantee

01 803.1

01 823.1

01 833.1

01 805.1

Single cylinder

Length

Euro profile

Oval profile

40mm

01 803.1

01 802.1

45mm

01 803.2

01 802.2

50mm

01 803.3

Length

Euro profile

Oval profile

40mm

01 813.1

01 812.1

45mm

01 813.2

01 812.2

50mm

01 813.3

Length

Euro profile

Oval profile

60mm

01 823.1

01 822.1

70mm

01 823.2

01 822.2

80mm

01 823.3

01 822.3

Length

Euro profile

Oval profile

60mm

01 833.1

01 832.1

70mm

01 833.2

01 832.2

80mm

01 833.3

01 832.3

10 variable

Single thumbturn

60/70/80

34Ø

60/70/80

32Ø

Double cylinder

01 805.1

01 804.1

01 810

Cam locks Where a complete masterkeyed system is required, even cupboards or cabinets can be included on the system Scandinavian cylinders Where scandinavian locks are used, corresponding cylinders are available to suit internal and external variants

Double cylinder & turn

01 806.1 19.5

Rim cylinder

01 805.1 Scandinavian Internal

01 807.1

Rim mortice cylinder

01 804.1 Scandinavian External

01 808.1

Cam lock

01 806.1 Scandinavian Pair - Int/Ext

01 809.1

Specification advice Select the cylinder length to suit the combined thickness of the door and the hardware. The minimum cylinder projection is required for visual and security reasons. For locks fitted off-centre within the door thickness, offset cylinders are available to special order. 29 www.laidlaw.net

ORBIS CLASSIC - SIGNS & SYMBOLS Finishes

Card frames Slide in inserts are suitable for engraving or for applied lettering/ graphics.

SS7 PS7

SA7

Item no.

Description

60 903.1

Card frame 60 x 60mm

60 903.2

Card frame 180 x 60mm

• •

Item no.

Symbol

PVC

60 001.1

male

Unit single single

• Screw fixings are concealed by the insert • Clear perspex insert to allow cards to be inserted

Tactile Symbols Orbis tactile signs incorporate a combination of visual identification, Braille, raised symbols and letters to assist visually impaired people to locate facilities within a building.

60 001.3

60 001.2

• High contrast ivory on dark blue signs • Self adhesive back for easy fixing to most flat surfaces

Symbols A comprehensive range of face fixed symbols for general application in WC and washroom facilities and on fire door applications. • Supplied with face fixing screws • 76mm diameter • Available in all finishes • Fire signs comply with BS5499:5 2002

60 001.2

female

60 001.3

disabled

60 001.4

baby change

60 001.7

telephone

• • • • •

Unit single single single single single

Disability Discrimination The use of tactile signage is a requirement of Part M2 of the Building Regulations 1991 and it is recognises the use of tactile signs ensures people with visual impairments are considered under the requirements of the Disability Discrimination Act.

Fire door keep shut

Fire door keep locked

Fire door keep locked shut

Keep locked shut

Automatic fire door keep clear

60 601

60 602

60 603

60 604

60 617

Fire door keep clear

Fire exit keep clear

Fire door keep closed

60 618

60 619

60 620

Finishes Item no. 60 601

60 605

60 608

60 606

60 609

60 607

60 621

Push

Pull

60 622

60 623

60 624

Symbol Fire Door Keep Shut

60 602

Fire Door Keep Locked

60 603

Fire Door Keep Locked Shut

60 604

Keep Locked Shut

60 605

Male

60 606

Female

60 607

Disabled

60 608

Unisex

60 609

Shower

60 617

Automatic Fire Door Keep Clear

60 618

Fire Door Keep Clear

60 619

Fire Exit Keep Clear

60 620

Fire Door Keep Closed

60 621

Baby Change

60 622

60 623

Push

60 624

Pull

SS PS

• • • • • • • • • • • • • • • • •

SA PA

• • • • • • • • • • • • • • • • •

Unit single single single single single single single single single single single single single single single single single

30 www.laidlaw.net

ORBIS CLASSIC - SIGNS & SYMBOLS Fire Exit Signs

60 411.1 - 60 411.2

Fire exit signs are used on doors, emergency or fire escape routes. The Orbis Classic range of fire exit signs incorporates 75mm letter height to comply with Fire Precautions Act 1971 and include 'symbol only' versions to suit EC Council Directives. • Designed to comply with EC Council Directive 92/558/EEC and Fire Precautions Act 1971 • Supplied with woodscrews or self adhesive pads for alternative fixing method • All signs available in the following finish and fixing combinations:

Aluminium - screw fixed Aluminium - self adhesive Vinyl - self adhesive Plastic - screw fixed Plastic - self adhesive

Photoluminescent Signs The signs shown on this page are also available in photoluminescent material which are energised by exposure to light. When the light source fails, the material emits a highly visible luminescense which lasts for several hours. The natural photoluminescent daylight colour of light green has been officially recognised in BS 5499 and BS 5378 as suitable for use in safety signs.

60 011.1

60 412.1 - 60 412.2

60 411.1 - 60 411.2

60 414.1 - 60 414.2

60 413.1 - 60 413.2

Please Note The signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown.

60 013.1 - 100mm x 630mm 60 417.1 - 60 417.2

60 416.1 - 60 416.2

60 014.1 - 100mm x 630mm

60 415.1 - 60 415.2

EXIT

FIRE EXIT Break glass bolt to open in event of fire

Break glass to reach latch in event of fire

FIREPushEXIT bar to open

60 055 150mm x 150mm

60 051 225mm x 225mm

FIRE EXIT

31 www.laidlaw.net

FIRE EXIT FIRE 60 014.2 - 200mm x 600mm

Push pad to open

60 060 - 100mm x 140mm

60 418.1 - 60 418.2

Dimensions .1 100mm x 240mm .2 150mm x 360mm

60 071 - 75mm x 150mm

Light switch for fire escape

60 011.1 - 100mm x 630mm

60 012.1 - 100mm x 630mm

FIRE EXIT

Sizes The standard signs are available in the sizes shown. All the signs are available in other sizes to special order.

FIRE EXIT FIRE EXIT FIRE EXIT FIRE FIRE EXIT EXIT FIRE EXIT FIRE FIRE EXIT EXIT FIRE EXIT FIRE EXIT

Light switch for emergency exit 60 062 - 100mm x 140mm

60 070 - 75mm x 150mm

Push bar to open

60 056 - 150mm x 280mm

External emergency light switch 60 063 - 100mm x 140mm

Break glass/cover in event of fire

60 072 - 75mm x 150mm

Break glass for key in event of fire

60 073 - 75mm x 150mm

Push bar to open 60 054 - 140mm x 470mm

Push bar to open 60 052.1 - 65mm x 280mm 60 052.2 - 130mm x 565mm

ORBIS CLASSIC - SIGNS & SYMBOLS Safety & Security Signs Safety and security signs are mandatory and require a specific behaviour or action to be taken. By separating the symbol and the wording the signs are designed to comply with EC Council Directive 92/58/EEC. • Designed to comply with EC Council Directive 92/58/EEC • All signs white lettering on blue background • Supplied with woodscrews or self adhesive pads for alternative fixing method • Dual language signs in Welsh and English are also available • All signs available in the following finish and fixing combinations:

Aluminium - screw fixed Aluminium - self adhesive Vinyl - self adhesive Plastic - screw fixed Plastic - self adhesive

60 031

Sizes Signs 60 030 to 60 048 are 80mm x 80mm. Signs 60 345.2 & 60 346.2 are 400mm x 300mm. Signs 60 345.1 & 60 346.1 are 200mm x 150mm. 60 036

Other sizes available to order along with non-standard signs. Please contact your Laidlaw Technical Consultant for further details.

Fire escape keep clear

Fire exit keep clear

Please Note The signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown.

60 345.1

60 345.2 - 400mm x 300mm

60 346.2 - 400mm x 300mm

Fire escape keep clear

Fire exit keep clear

60 345.1 - 200mm x 150mm

Automatic fire door Keep clear

60 030

Alarm will sound if this door is opened

60 036

This door is connected to the alarm system and must not be opened except in emergency

60 042

Fire door Keep locked

60 031

Keep locked shut 60 037

This door must not be locked or bolted when premises are occupied

60 043

Secure door open when premises are occupied

60 032

Close this door 60 038

Fire door keep shut when not in use

60 044

60 346.1 - 200mm x 150mm

Fire check door Keep clear This door will automatically close when the alarm system is operated Test release device weekly

60 033

Automatic fire door Keep clear Close at night

60 039

Close at night and in emergency

60 045

This door to be kept locked shut when not in use

60 034

Remove security fastening when premises are occupied

60 040

This door must be kept closed

60 047

Keep unlocked during working hours

60 035

Fire door Keep shut

60 041

Close this door at night

60 048

32 www.laidlaw.net

ORBIS CLASSIC - DOOR STOPS & HOLDERS Door Stops & Skirting Buffers Designed to fix onto the wall, skirting or floor to limit the opening of the door and to protect door hardware from damage • Skirting mounted options • Rose fixed skirting option • Wall or floor mounted • Range of projections to suit different hardware

Finishes

Skirting buffer Item no.

Projection

32 800.1

75mm

32 800.2

95mm

Concealed rose fixed

32 801.1

32 800.1

Item no.

Projection

32 801.1

75mm

32 801.2

95mm

32 800.2 Wall or floor mounted

32 800.1 & 32 800.2 19Ø

32 801.1 75 / 95

52Ø

75 / 95

Item no.

32 811

52Ø

Projection

• •

SA7

• •

Projection

SA7

•

SS PS

32 803

40.5mm

• •

Face Plate

SS7 PS7

Item no.

40.5 45

25Ø

2.5

25Ø 2.5

Unit single single

round - 45mm

32 835

square - 45mm

• •

Face plate

SS7 PS7

SA7

Unit single single

Finishes

32 850

round - 45mm

32 845

square - 45mm

• •

SA7

Specification advice Door holders must not be used on fire door applications.

45Ø

Unit single

Finishes

32 840

Item no.

32 840

single

Finishes SS7 PS7

24.5mm

Non-lockable

Unit single

29Ø

35Ø

45Ø 24.5

single

Finishes SS7 PS7

32 802

Lockable

32 835

33 www.laidlaw.net

Unit single

32 803

32 850

• Dual purpose stop/holder • High resistance to deforming under heavy usage • Lockable versions can be held in the retracted position • Available with round or square face plate • Grade 316 stainless steel • 100,000 cycle tested • Installation kit included

• •

Finishes

Door Stops & Door Holder 32 845

SA7

Item no.

Designed for floor mounting in timber or solid substrates. The dual purpose door stop & holder will act as a door stop and can be pushed down to act as a door holder.

• •

40mm

Floor mounted

32 802

SS7 PS7

Unit single single

ORBIS CLASSIC - PULLS, HOOKS & WC FITTINGS Flush Pulls 50

SS7 PS7

Item no.

Size (mm)

61 800

100 x 50

•

Item no.

Function

SS7 PS7

62 800.0

blank

SA7

•

Unit single

100

• Supplied with self-tapping screws for surface fixing • Flush pull suitable for doors 20mm thick minimum • Available in all finishes

Finishes

Flush pull

61 800

Cylinder Pulls

62 800.0

62 800.1

62 800.2

Finishes

Cylinder pulls

A series of face fixed cylinder pulls suitable for use with rim nightlatches and mortice nightlatches. • Supplied with self-tapping screws for surface fixing • All locking and cylinder types included

62 800.3

62 800.8

62 800.1

lever key locks

62 800.2

oval profile cylinder

62 800.3

euro profile cylinder

62 800.8

round (rim) cylinder

• • • • •

Function

SS7 PS7

SA7

• • • • •

Unit single single single single single

Hooks & WC Fittings

Finishes

Hooks

A compact series of hooks and wc fittings. Additional items may also be available from the Orbis Premier Series of hardware.

Item no.

81 803

81 804

80 802

81 802

81 801

hat & coat hook

81 802

buffered hat/coat hook

81 803

robe hook

81 804

buffered robe hook

• • • •

SA7

• • • •

Unit single single single single

81 801

Indicator bolt Item no.

Size (mm)

89 003

62 x 40 x 10

89 901

75 x 52

Finishes SCP

Unit single

SS7/PS7/SA7 single

89 901 89 003

Finishes

WC roll holder Item no.

Size (mm)

80 802

149 x 74 x 31

80 802

130 x 72 x 28

SS7 PS7

•

SA7

Unit single

•

single

34 www.laidlaw.net

ORBIS CLASSIC - FLUSH & SLIDE BOLTS Flush Bolts A series of lever action flush bolts, primarily intended for mounting in the leading edge or inside face of the normally closed leaf of a pair of doors or a leaf and a half. • Smooth lever action • Range of lengths to suit different door heights • 13mm diameter shoot • Radius end and square end variants

Finishes

Square ended bolts 34 005.3

ESS EPS

Item no.

Length

34 005.1

150mm

34 005.2

200mm

34 005.3

300mm

• • •

Item no.

Length

ESS EPS

34 007.1

150mm

34 007.2

200mm

34 007.3

300mm

SA7

• • •

Unit single single single

34 005.2 Finishes

Radius ended bolts 34 007.2

34 005.1

• • •

SA7

• • •

Unit single single single

Square end SS and PS finish flush bolts are made from 18mm wide section. All radius end and SA square end flush bolts are made from 20mm wide section.

Flush Bolts - Knob Slide

Finishes

Knob slide bolts

34 006.2

A series of sliding knob flush bolts designed for mounting on the inside face of the normally closed leaf of a pair of doors or a leaf and a half.

Item no.

Length

34 006.1

152mm

34 006.2

229mm

34 006.3

305mm

PCP SCP

• • •

Unit single single single

• Smooth slide action • Range of lengths to suit different door heights • 11mm diameter shoot

Surface Bolts

34 010.2

Surface bolt - straight

A series of surface mounted bolts in straight and cranked formats. 34 010.1

• Range of lengths to suit different door heights • 10mm diameter shoot • All bolts 35mm wide • Supplied with self-tapping screws

Item no.

Length

34 010.1

150mm

34 010.2

200mm

34 010.3

250mm

Surface bolt - cranked

34 011.2

Item no.

Length

34 011.1

100mm

34 011.2

150mm

Bolt Sockets Sockets for flush bolts. Floor mounted, suitable for 13mm diameter shoots only. • Easy clean variant • Sprung loaded dust excluding variant • Suitable for timber or concrete floor substrates • Suits 13mm diameter shoot

35 www.laidlaw.net

34 028

34 029.3

34 028 34 029.3

• • •

Unit single single single

Finishes ESS EPS

• •

Unit single single

Finishes

Floor sockets Item no.

Finishes SS7 PS7

Type easy clean dust excluding

SCP

• •

Unit single single

ORBIS CLASSIC - PANIC EXIT HARDWARE Abusing the bolt

Pushbar Devices

Testing the strength of the bolt involves the equivalent of the combined strength of 4 people trying to pull the bolt away from the door.

When lives may depend on an exit device Laidlaw feel they have a responsibility to test products to exceed all current performance and safety standards, ensuring they will operate first time, every time.

An attempted break-in is simulated to test the security of the bolt, force is applied to the anti-thrust device as if the bolt were being â&#x20AC;&#x2DC;jemmiedâ&#x20AC;&#x2122; out of its socket.

Rigorous testing is continually being carried out on the Laidlaw range of exit hardware providing peace of mind for specifiers, distributors, installers and users.

Corrosion resistance

Repeatedly tested to operate at 50% lower than the standard requirement, ensuring that the door can be operated with minimum force, for example by small children, the elderly and people with special needs.

A test which measures how suitable the exit device is for varying environmental conditions. All Briton 376E series panic and emergency exit hardware have been tested to EN 1670 Building Corrosion Requirements and have achieved at least grade 3 (high resistance). This ensures the product will function correctly in wet, polluted and exterior environments. Note, EN 1670 test does not relate to the finish.

Two tests are undertaken. The first is to operate the door with a maximum force of 80 Newtons.

The standard EN 179 features a number of tests used in EN 1125 but has different levels of security testing.

Low operating force

The second test simulates a panic situation whereby the door is put under 1000 Newton pressure to simulate a group of people pushing against the door.

EN Classification Codes

The operating force on the device with this weight should not exceed 220 Newtons.

Category of use Class 3 = high frequency of use by public and others with little incentive to exercise care.

(3)

(6/7)

(5/6)

Abusing the crossbar The crossbar is attacked with a force equivalent to that of a 16 stone man (1000 Newtons) pulling and pushing it in all directions and standing on it, after which the bar must still operate.

Cycle tested to measure durability for everyday use. Briton 376E series products exceed the highest requirement of 200,000 cycles.

(1)

(3/4)

2 2

To reduce the risk of trapping fingers and/or the blocking of the panic device, any gap shall not trap a test rod of 10mm diameter at any position of the bar travel during the operation of the panic device.

Under both standards each product is classified and graded to identify the level of compliance within each category. These classifications are set out opposite.

Fire Resistance (EN 1634) Classification 1 - suitable for fire/smoke door use Classification 0 - not suitable for fire/smoke door use

Safety All panic and emergency devices have a critical safety function therefore only grade 1 is identified. Corrosion Resistance (EN 1670) Grade 3 - high resistance Grade 4 - very high resistance.

(2)

(1/2)

The finger trap test

Door size/mass Class 5 - doors up to 100kg Class 6 - doors up to 200kg.

(0/1)

Cycle testing

Durability (Cycle Testing) Grade 6 - 100,000 cycles Grade 7 - 200,000 cycles

(A/B)

Security EN 1125 - Grade 2 - up to 1000N. EN 179 - Grade 2 - 1000N - Grade 3 - 2000N - Grade 4 - 3000N

Projection of Device Class 1 - projection up to 150mm Class 2 - projection up to 100mm Type of Operation EN 1125 Type A - 'push bar' operation Type B - 'touch bar' operation EN 179 Type A - 'lever handle' operation Type B - 'push pad' operation

36 www.laidlaw.net

ORBIS CLASSIC - PANIC EXIT HARDWARE

Pushbar range - EN 1125 Where personnel have not been trained in the location and operation of the buildings exit devices or members of the public have access, exit devices conforming to ENâ&#x20AC;&#x2C6;1125 must be specified and installed. IMPORTANT If you are in any doubt at all ALWAYS use products that conform to EN 1125 The following range consists of a vertical panic bolt, rim panic latch and a mortice nightlatch operator. Each product is operated by a horizontal push bar, which when pushed in a downward arc withdraws either the bolts or the latch, releasing the door for immediate escape in the event of an emergency.

59 776 - Vertical panic bolt

59 778 - Reversible rim panic latch

59 777 - Rebated double door panic set

Item no.

Description

Item no.

Description

Item no.

Description

59 776.1

Panic bolt

59 778.1

Rim panic latch - LH

59 777.1

Double rebated door panic set - LH

59 776.2

Panic bolt - alarmed

59 778.2

Rim panic latch - RH

59 777.2

Double rebated door panic set - RH

59 776.3

Panic bolt - with Pulmans

59 778.3

Rim panic latch - LH with dogging

59 776.4

Panic bolt - with dogging

59 778.4

Rim panic latch - RH with dogging

59 776.5

Panic bolt - with Pulmans & dogging

Double rebated door panic set Comprises a vertical panic bolt and reversible rim panic latch complete with a double door strike in one convenient pack.

37 www.laidlaw.net

ORBIS CLASSIC - EMERGENCY EXIT HARDWARE

Push pad range - EN 179 Products conforming to EN 179 are only intended for use by personnel who are fully aware of the escape routes and have been trained to operate these devices. The following range consists of a push pad vertical bolt, reversible push pad rim latch and push pad mortice nightlatch. Each product when operated withdraws either the bolts or the latch, releasing the door for immediate escape in the event of an emergency.

â&#x20AC;&#x153;These products should never be used in areas open to the general public.â&#x20AC;?

59 779 - Mortice panic nightlatch

59 772 - Push pad vertical bolt

59 738 - Reversible push pad rim latch

Item no.

Description

Item no.

Description

Item no.

Description

59 779.1

Mortice panic nightlatch

59 772

Emergency push pad vertical bolt

59 738

Emergency push pad latch - reversible

59 779.2

Mortice panic nightlatch - alarmed

59 779.3

Mortice panic nightlatch - with dogging

Pad operated vertical bolt suitable for single and double doors up to 2500mm high x 1300mm wide

Pad operated rim latch for use on single doors and first opening leaf of double rebated doors. Reversible on site, the latch can be used with a rim cylinder fitted to the outside of the door

Mortice panic nightlatch Mortice nightlatch operated by panic push bar. Suitable for single doors and the first opening leaf of a double door application. 38 www.laidlaw.net

ORBIS CLASSIC - PANIC EXIT HARDWARE To provide access from outside the Laidlaw 59 700 Series includes a lever or knob operated unit which can be integrated with the panic or emergency device • Designed to suite with all devices within the 59 700 series of EN compliant exit devices.

Item no.

Description

36 413KE/NC

Knob OAD - No cylinder

36 413KE

Knob OAD - With cylinder

Item no.

Description

36 413LE/NC

Lever OAD - No cylinder

36 413LE

Lever OAD- With cylinder

• Choice of interchangeable knob, or lever (available separately) • Supplied with euro-profile cylinder as standard. Cylinders can be keyed-alike or master-keyed • Suitable for doors between 40mm and 70mm thick • Fixings supplied are suitable for timber & metal doorsets • Powder coated for additional durability • Choice of plated finishes – satin stainless steel, polished stainless steel and polished brass. • 5 year warranty. 36 413/LE - lever variant • The lever is secured by a special shear screw designed to fail if the lever is severely abused (e.g. attempted break in, or vandalism) ensuring the mechanism is protected from damage. The shear pin can then be simply replaced to restore normal operation. • Lever is supplied loose to allow easy on-site handing 36 413/KE – knob variant

• Ergonomic design providing improved grip in wet conditions. • Non-handed

57 376.1 Flush face keeper plate • For use with 59 776.1, 59 776.4, 59 776.2, and 59 772 •

For applications where there is a flush head frame a flush face keeper plate can be used to secure the bolt.

39 www.laidlaw.net

57 378DDS - Double door strike

57 376.2 - Extra long top shoot

• For use on double rebated door applications with a rim • Extra long top shoots are suitable for use on panic latch on the first opening leaf and a vertical bolt on the doors in areas that require the push bar to be in a lower position ie schools. It can also be second opening leaf. used on doors up to 3350mm high, however • Available in a wide range of finishes doors over 2500mm are outside the scope of EN 1125 and EN 179. • For use with Briton 59 776.1, 59 776.2, 59 776.3, 59 776.4, 59 776.5, and 59 772. • Available in a wide range of finishes.

ORBIS CLASSIC - PANIC EXIT HARDWARE

Finishes All exit devices and outside access devices are now available in a wide range of finishes including: Powder coated finishes Silver (SE), gold (GE) brown bronze (BE) and the full range of colours to match the Normbau range of nylon architectural hardware. Dual finishes green and white, black and red All coloured finishes are now powder coated for increased durability and have been salt-spray tested in excess of 240 hours. Metallic plated finishes satin stainless steel (SS), polished stainless steel (PS), polished brass (PB) Double door strikes and metal door strikes are now available colour matched.

Colour coded powder coated silver (SES) 1. Pushbar/Touchbar - Silver 2. Main and end casing covers - Silver 3. Upper, lower or side Pullman covers - Silver 4. Rods - Silver Coloured powder coated 1. Pushbar/Touchbar - Choose from powder coated swatches 2. Main and end casing covers - Matt Black 3. Upper, lower or side Pullman covers - Matt Black 4. Rods - Matt Black

Metallic powder coated 1. Pushbar/Touchbar - Choose from metallic swatches 2. Main and end casing covers - Matt Black 3. Upper, lower or side Pullman covers - Matt Black 4. Rods - Matt Black

Due to the limitation of the printing process, we suggest you check your final choice of finish against the actual products or a sample swatch Metallic Finishes

Satin Stainless Steel (SS)

Polished Stainless Steel (PS)

Powder Coated Finishes

Polished Brass (PB)

Silver (SE)

Matt Black (BM)

Brown Bronze (BE)

Gold (GE)

White 19 (NWH)

Black 16 (BM)

Manhattan 67 (NMG)

Dark Grey 18 (NDG)

RAL - 9016

RAL - 9005

RAL - 7038

RAL - 7043

Slate Blue 63 (NSB)

Blue 11 (NBU)

Dark Blue 37 (NDB)

Ivory 65 (NIV)

Yellow 22 (NYE)

Green 13 (NGR)

Red 12 (NRE)

Dark Red 35 (NDR)

RAL - 5014

RAL - 5002

RAL - 5003

RAL - 1013

RAL - 1023

RAL - 6016

RAL - 3003

RAL - 3005

40 www.laidlaw.net

STANDARDS & BS EN CLASSIFICATIONS The standards compliance of Orbis Classic products falls into 3 categories • Performance testing to the latest European standards, including CE marking where this is appropriate • Suitability for fire & smoke doors with products successfully included on timber and steel door fire tests • Compliance with the requirements of Approved Document M of The Building Regulations and BS 8300, and thereby considered suitable for use in DDA applications BS EN Standards are the benchmark for product performance in several major product areas within architectural hardware. Each standard prescribes a set of test procedures for products which are selected at random from stock production items. The test data and product evaluation produces a multi digit classification code which runs in parallel across each product area (or as close as practically possible). The relevant BS EN standards are summarised opposite. Further details of these BS EN standards are available from The Association of Builders Hardware Manufacturers at www.abhm.org.uk

CE Marking is applicable only to those products where the BS EN Standard has been harmonised under the Construction Products Directive.

BS EN 1906 is the European standard for 'Lever handles & knob furniture' and is applicable only to items which are used to operate locks or latches. Testing and evaluation results in an 8 digit code.

Digit 1- Category of Use (Grades 1 to 4) Grade 3 is high frequency use by the public with a high chance of misuse. Digit 2 - Durability (Grade 6 or 7) Testing to 100,000 (Grade 6) or 200,000 cycles (Grade 7) Digit 3 - Door Mass (No requirement)

3 7

1-4

6-7

Digit 4 - Fire Resistance (Grade 0 or 1) Grade 0 is not suitable for fire door applications

- 1 0 3 2 U -

0-1

0-4

ABU

Digit 5 - Safety (Grade 0 or 1) Digit 6 - Corrosion Resistance (Grade 0 to 4) Grade 3 is the minimum for external applications

Example Orbis 54 800.19 lever classification 37-1032U

Digit 7 - Security (Grade 0 to 4) Digit 8 - Type of Operation (Type A, B or U) Type U is unsprung lever furniture

BS EN 12209 is the European standard for 'Mechanically Operated Locks and Latches'. The standard is wide ranging and covers physical testing of the lock and also classifies it according to the method of operation. Testing and evaluation results in an 11 digit code. BS EN 12209 is harmonised under the Construction Products Directive and CE marking of approved products is permitted.

3 X 8 1 0 F 2 B A 2 0

1-3

A-W

1-9

0-1

0-G

1-7

ABU

0-H

0-4

0-H

Example Orbis 11 851 Lockcase classification 3X810F2BA20

Digit 1- Category of Use (Grades 1 to 3) Grade 3 is high frequency use by the public with a high chance of misuse. Digit 2 - Durability (Grades A to W) A complex grading sytem based on a combination of side load and test cycles Digit 3 - Door Mass (Grades 1 to 9) A complex grading system based on a combination of door mass and maximum closing force required Digit 4 - Fire Resistance (Grade 0 or 1) Grade 0 is not suitable for fire door applications Digit 5 - Safety (Grade 0 or 1) Digit 6 - Corrosion Resistance (Grade 0 & A-G) Digit 7 - Security (Grade 1 to 7) Digit 8 - Field of Door Application (Type A to R) Digit 9 - Type of Key Operation (Grade 0 & A to H) Digit 10 - Type of Spindle Operation (Grade 0 to 4) Digit 11 - Key Identification (Grade 0 & A to H)

BS EN 1154 is the European standard for 'Controlled Door Closing Devices'. The standard measures mechanical door closer performance resulting in a 6 digit classification.

BS EN 1155 is a parallel standard for 'Electrically Powered Hold-open Devices' and is therefore relevant to Electromagnetic door closers. Such closers must satisfy the requirements of both standards, BS EN 1154 and BS EN 1155. BS EN 1154 and BS EN 1155 are both harmonised standards and CE marking became mandatory in 2004

Digit 1- Category of Use (Grades 3 to 4) (Grade 3) Defines the angle from which it will close the door Digit 2 - Durability (Grade 8 only) (Grades 5 to 8) Grade 8 describes 500,000 test cycles for both standards but is the only grade available in BS EN 1154 Digit 3 - Door Mass (Grades 1 to 7) (Grades 3 to 7) Identifies the closing power of the closer by max. door width and weight (see chart below) Power size

4 8 3 1 1 4

3-4

1-7

0-4

3 8 3 1 1 4 3

5-8

3-7

0-4

BS EN 1154 classification BS EN 1155 classification

Example Orbis 31 803 Smoothline closer classification 483113

41 www.laidlaw.net

max. door size width mm 750 weight kg 20

2 850 40

950 1100 1250 1400 1600 60 80 100 120 160

Digit 4 - Fire Resistance (Grade 0 or 1) (Grade 1) Grade 0 is not suitable for fire door applications. Grade 1 must be supported by fire tests to BS EN 1634 Digit 5 - Safety (Grade 1only) Grade 1 identifies the closer is hazard free Digit 6 - Corrosion Resistance (Grade 0 to 4)

STANDARDS & BS EN CLASSIFICATIONS

Fire Testing Individual products are not in themselves fire tested, but are included as an integral part of a fire test carried out on a timber or steel fire door. As a consequence, the details of the test, the construction of the door, the inclusion of intumescent material etc must be considered when specifying products suitable for use on a fire door. Where Laidlaw products are indicated as suitable for fire door applications, the products have been successfully included on the test door which has achieved the stated rating. Laidlaw holds comprehensive test certification for all appropriate products and these are available on request.

BS EN 1125 & BS EN 179 Products which are designed to provide safe and effective escape from a building in an emergency situation are covered by two European standards which have clearly defined applications. BS EN 1125 is the European standard for 'Panic Exit Devices'. The primary determining factor is that a 'Panic' device must be fitted where members of the public are present and have no prior knowledge of the exit or the hardware. BS EN 179 is the standard covering 'Emergency Exit Devices'. In 'Emergency' situations it is assumed the occupants will have prior knowledge of the exit and a panic situation is unlikely to occur. Testing and evaluation to each standard results in a 9 digit code. BS EN 1125 and BS EN 179 are harmonised under the Construction Products Directive and products must therefore carry the CE mark.

Digit 1- Category of Use (Grades 3) Grade 3 is high frequency use by the public with a high chance of misuse. Digit 2 - Durability (Grades 6 or 7) Cycle testing, Grade 7 having undergone 200,000 cycles Digit 3 - Door Mass (Grades 5 or 6) Determined only by door mass of 100g or 200kg Digit 4 - Fire Resistance (Grade 0 or 1) Grade 0 is not suitable for fire door applications Digit 5 - Safety (Grade 1 only) All panic and emergency exit devices have a critical safety function Digit 6 - Corrosion Resistance (Grade 3 or 4) Digit 7 - Security (Grade 2 only) (Grade 2 - 4 in BS EN 179) Digit 8 - Projection of Device (Grade 1 or 2) Grade 2 is low projection, less than 100mm

3 7 6 1 1 4 2 2 B 3

6-7

5-6

0-1

3-4

1-2

A-B

Example Orbis 59 778 Panic Device classification 37611422B

BS EN 1935 is the European standard for 'Single Axis Hinges' used on doors and windows. Testing and evaluation of the product results in a 8 digit code. BS EN 1935 is harmonised under the Construction Products Directive and products must therefore carry the CE mark.

Digit 9 - Type of Device (Type A or B) BS EN 1125 - Type A is a pushbar operation BS EN 1125 - Type B is touchbar operation BS EN 1125 - Type A is with lever handle operation BS EN 1125 - Type B is with push pad operation

Digit 1- Category of Use (Grades 1 to 4) Grade 3 is heavy duty use. Digit 2 - Durability (Grades 3, 4 or 7) Cycle testing, Grade 7 having undergone 200,000 cycles Digit 3 - Door Mass (Grades 0 to 7) Table of door mass from 10kg up to 160kg Digit 4 - Fire Resistance (Grade 0 or 1) Grade 0 is not suitable for fire door applications

3 7 6 1 1 3 0 13

1-4

3-4-7

0-7

0-1

0-4

0-1

1-14

Example Orbis 37 801.1 hinge classification 37611422A

Digit 5 - Safety (Grade 1 only) All hinges have a critical safety function Digit 6 - Corrosion Resistance (Grades 0 to 4) Grade 3 is high resistance Digit 7 - Security (Grade 0 or 1) Grade 0 is not suitable for burglar resistance Digit 8 - Hinge Grade (Grades 1 to 14) Grading is by combination of test cycles and door mass. Grade 13 is 200,00 cycles of a door mass of up to 120kg

42 www.laidlaw.net

DDA, APPROVED DOC. M & BS 8300 The implementation of legislation in 1996 made it a legal duty on those responsible for buildings used by the general public, and employers responsible for places of work, to ensure that the building and its facilities are accessible to disabled people. The aim of The Disability Discrimination Act (DDA) is to make it a duty to avoid discrimination againsts disabled people and this duty requires that Service Providers make "reasonable" adjustments to the design of the building in order to provide this universal level of access.

The details on this page are a simple summary of the primary sources of information related to the use of hardware products in order to satisfy disabled access. The Disability Discrimination Act It is important to remember that the Disability Discrimination Act is civil rights legislation and does not set out specific requirements or guidance in the design of buildings. As such it is therefore not appropriate to attach any notion of conformity to products, such as "DDA compliant" or "Conforms to DDA requirements". The legislation came into force on 1st October 2004. Any new building or alterations to existing buildings, in order to satisfy obligations under the DDA, must comply (in England & Wales) with The Building Regulations, and in particular, the 2004 edition of Approved Document M (ADM) which became effective in May 2004. Where certain issues are not covered in ADM, further reference will be made to BS 8300. Further detailed information can be obtained from the following: Office of the Deputy Prime Minister www.odpm.gov.uk Association of Buildiers Hardware Manufacturers www.abhm.org.uk BSI Customer Services cservices@bsi-global.com Office of Public Sector Information www.uk-legislation.hmso. gov.uk Disability Rights Commission www.drc-gb.org Guild of Architectural Ironmongers www.gai.org.uk

43 www.laidlaw.net

Approved Document M (ADM) The main requirements set out in ADM are, as with all parts of The Building Regulations, performance based and the guidelines set out in the document are recognised as one way of achieving the requirements. The scope of the requirements are clearly set out, requiring that provision is made for people to "a) gain access to and b) use the building and its facilities". This includes the provision of sanitary accomodation in domestic and non-domestic buildings. ADM applies not only to new building but also to alterations and extension of existing buildings. Where certain issues are not covered within ADM, further reference will be made to BS 8300.

BS 8300:2001 This standard provides guidance on good practice in the design of buildings to make them suitable for use by disabled people. The standard is often used as a supplement to ADM and includes more specific dimensional guidance, particularly regarding the sizes of door operating hardware.

ADM contains a number of very specific requirements for the following aspects related to architectural hardware specification.

BS 8300 contains the following recommendations related to architectural hardware specification.

Accessible Doors ADM recognises that negotiating entrance doors can be difficult for the general public, not just disabled people: parents with children, those carrying luggage or with pushchairs etc. It is stated within ADM that doors which are required to be self closing must require a force no greater than 20N at the leading edge in order to open them. In most practical applications "A powered door opening and closing system .... is the most satisfactory solution for most people" (ADM 2.10). Although the 20 Newtons ‘rule’ technically still exists it has been generally superceded by a two-phase criteria established within BS 8300 in 2005. This states a maximum opening force of 30N at the initial opening stage (0˚ to 30˚), reducing to 22.5N from 30˚ to 60˚ opening angle.

Accessible Doors Aside from the ‘headline’ figures of ADM, the guidance in BS 8300 points clearly to the use of powered solutions including low energy operators to achieve the level of accessibility required on external doors (including recommendations for the positioning of any manual controls.

Fire & Smoke Doors BS EN 1154 requires fire doors to be held closed by a door closer with a minimum power size 3. This requires a force in excess of 20N (see chart below) and therefore puts it into conflict with the 20N opening force requirement of ADM. In these circumstances ADM recommends the use of electromagnetic hold open or low energy door operators. For fire doors within corridors the preference is for electromagnetic hold open units. Where privacy is still a requirement, such as doors to individual rooms, an electromagnetic device which offers a 'swing free' facility is preferable.

Fire & Smoke Doors Doors to escape stairs and final exit doors are not specifically covered in ADM. In BS 8300 it is considered suitable to use a conventional door closer in these cases, as such doors are likely to be opening in the direction of escape (ie push to exit). In these situations BS 8300 recommends a maximum opening force of 30N.

BS EN 1154 BS EN 1154

size 1

size 3

BS EN 1154 min. closing moment

9 Nm

18 Nm

Min. closing force (moment/door width)

10.59 N

21.17 N

BS EN 1154 min. closer efficiency

50%

55%

Corresponding min. opening force

21.18 N

38.5 N

Note: calculations are based on a door leaf width of 850mm.

Internal Doors For internal doors which need to be self closing for privacy or environmental reasons, they must meet the maximum opening force criteria of 20N. In these circumstances a high efficiency variable power door control is required. When set to the lowest strength (size 1) to reduce the opening force it may cause problems in latching the door, especially in locations which may be susceptible to drafts or air pressure differences. Locks with a 'soft action latch' and high quality hinges will help in making sure the door latches properly each time.

Closing & Opening forces As can be seen from the chart opposite, a door closer power size 1 with only the minimum efficiency allowed in the EN standard (50%) will not satisfy the maximum opening force to satisfy the 20N limit in ADM. Also clearly evident is the fact that a power size 3 closer (the min. allowed in satisfying the requirements for a fire door) has an opening force at the edge of the door beyond the 30N maximum allowed in the revised regulations. Only high efficiency closers will therefore meet the dual requirements for an accessible fire door.

DDA, APPROVED DOC. M & BS 8300

Lever handle dimensions

Approved Document M (ADM)

BS 8300:2001

Door Opening Hardware Guidance on the specification for door hardware falls into 2 main categories

Door Opening Hardware BS 8300 is more detailed in its recommendations, prescribing dimensional parameters for locks & latches, lever and pull handle furniture.

- ability to grip and operate the hardware - ability to visually locate the hardware

19mmØ 45mm minimum 'generous length'

Lock & latch critical dimensions BS 8300

Ability to grip and operate the hardware The requirement within ADM is that "where fitted with a latch, the door opening furniture can be operated with one hand using a closed fist, e.g. a lever handle" (ADM 2.17). Whilst no specific dimensional requirements are laid down in ADM, such recommendations are covered in BS 8300.

72mm minimum

It is a requirement of ADM that external handles (ie those used to open manual external doors), should not be 'cold to the touch'. Whilst most people will find a bare metal handle unpleasant to grip in the depths of winter, for some, particularly elderly people, it can be quite painful.

hor

izo n hantal pu dle ll

min .l 600ength mm

It also requires a backset of 54mm minimum (from edge of door to the lockcase operating centre - see diagram opposite). Lever handles The principal requirements are that "where possible, door opening furnitue with a lever action should be used .... without tightly grasping it or twisting the wrist e.g by using a closed fist".It also recommends levers return to the door face at the open end to aid the grip and avoid catching clothing. Dimensional characteristics for lever handles are covered by Fig. 17 of BS 8300. See diagram opposite. Whilst lever handles are the preferred solution, there are circumstances where other issues can take precedence. The requirement to prevent self harm is one such issue where the risk associated with the lever furniture takes precedence over disabled access. Such situations will be covered by the provision of an Access Statement at the planning stage.

Pull handle recommendations - BS 8300

Pull handles Recommendations are included concerning the positioning and size of pull handles

400

kin

late

1000mm

kic

1400mm

900 - 1100mm 1000 preferred

54mm minimum

Locks & latches To improve physical and visual access to the lever and lock keyway, the distance from the edge of the door and between the lever and keyway should be maximised; "..the cylinder should either be above the lever handle, or the minimum distance between the handle and the keyway .. should be 72mm." (BS 8300 - 6.5.3.2)

Building Regulations in Scotland & Northern Ireland Technical Handbooks are published to guide specifiers in Scotland and Northern Ireland in much the same way as ADM but are not as detailed, offering little or no guidance in the specification of door hardware although the amended Technical Booklet (Part R) published in Northern Ireland does contain specific information related to handrailing and sanitary fittings. In most cases the Handbooks for Scotland refer specifiers to the guidance contained in BS 8300.

• • •

Minimum diameter 19mm Projection from door face 45mm Mounting height for pull handles as shown opposite

Recommendations also include the provision of a horizontal pull handle on doors fitted with a latch to enable wheelchair users to pull the door closed.See diagram opposite. Grab rails Part M3 of Approved Document M of The Building Regulations covers the provision of sanitary facilities. Whilst not specifically part of the Orbis Classic range, we have a full range of grab rails and disabled fittings. Please contact your Laidlaw Technical Consultant for further details.

44 www.laidlaw.net

DDA, APPROVED DOC. M & BS 8300

Approved Document M (ADM) Continued Colour contrast & light reflectance For people with impaired vision the ability to identify key objects in the environment determines their ability to live independantly. It is a requirement of ADM that "all door opening furniture (on manually operated doors) contrasts visually with the surface of the door" (ADM 2.17). "All door furniture should contrast in colour and luminance with the surface of the door ..." (BS 8300 - 6.5.1) The measure of brightness or luminance is measured by the amount of light which objects reflect (Light Reflectance Value - LRV). Whilst people with impaired vision may not be able to easily identify colour they will generally be able to identify some reflected light. The greater the difference in LRV between the door and the hardware, ie the contrast between the two, the easier the hardware will be to locate. On a basic scale of 1 - 100, where a black object which reflects very little light has a LRV of typically less than 10, the recommended contrast is 30 points of difference (although it is recognised that a value of 20 points may be adequate).

The use of backplates could contribute to increasing the visibility of the operating hardware.

Metallic finishes The suitability of metallic finishes is a complex issue due to numerous external factors which affect the percieved LRV of metallic substrates. The level and angle of incident light, the colour and nature of the door surface and the surrounding structure of walls, ceiling and floor will all have a bearing on the amount of light which each item of hardware reflects. It is therefore not possible to state which finishes are good and which are not; each must be judged in context to the surrounding environment. Recent Research The Research Group for Inclusive Environments was commissioned to undertake specific research in this area in association with the GAI (Guild of Architectural Ironmongers). A small (but nonetheless representative) group of visually impaired people tested actual ironmongery samples against various typical door finishes. Results showed that even at LRV differences of 10, over 72% of the test sample were confident of locating the hardware. It is thought that the 3D nature of the hardware, with its highlights and shadows contributes to the ease of location. Also, the nature of the hardware (gloss or matt) appeared to have no significant bearing on how easy it is to detect (see www.gai.org.uk for further information). Measurements Available to specifiers of Laidlaw products is a portable 'Spectrophotometer' which enables LRV readings to be taken of any material, for example door finishes and veneers, to compare with LRV readings of Laidlaw products. Please ask your Laidlaw Technical Consultant for more information. CPD seminars Laidlaw can provide a comprehensive series of RIBA approved CPD seminars including presentations covering DDA and Doc M issues. Subjects covered will include all aspects of colour contrast and demonstrations on the use of the 'Spectrophotometer'.

CPD seminar at our Salford branch showing the use of the Spectrophotometer.

45 www.laidlaw.net

ORBIS CLASSIC - INDEX item no.

page

item no.

page

item no.

page

item no.

page

item no.

page

01 802.1 01 802.2 01 803.1 01 803.2 01 803.3 01 804.1 01 805.1 01 806.1 01 807.1 01 808.1 01 809.1 01 810 01 812.1 01 812.2 01 813.1 01 813.2 01 813.3 01 822.1 01 822.2 01 822.3 01 823.1 01 823.2 01 823.3 01 832.1 01 832.2 01 832.3 01 833.1 01 833.2 01 833.3 07 110.13 07 110.13R 07 110.25 07 110.25R 07 112.13 07 112.13R 07 112.25 07 112.25R 07 114.13 07 114.13R 07 114.25 07 114.25R 07 116.13 07 116.13R 07 116.25 07 116.25R 08 850 08 851 08 852 08 853 08 854 08 855 08 856 08 857 08 860 08 861 08 862 08 863 08 864 08 865 08 866 08 867 10 851 10 851R 10 861 10 861R 11 701 11 701R 11 702 11 702R 11 702.2 11 702.2R 11 702.3 11 702.3R 11 706.2 11 706.2R 11 706.3 11 706.3R 11 851 11 851R 11 861 11 861R 11 862 11 862R 12 718.3 12 718.3R 12 723.2 12 723.2R 12 723.3

29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 27 27 27 27 27 27 27 27 26 26 26 26 26 26 26 26 27 27 26 26 28 28 28 28 28 28 28 28 28 28 28 28 27 27 26 26 26 26 28 28 28 28 28

12 723.3R 12 731 12 731R 12 751.2 12 751.2R 12 751.3 12 751.3R 12 851 12 851R 12 861 12 861R 13 701 13 701R 13 702 13 702R 13 712 13 712R 13 714 13 714R 13 851 13 851R 13 852 13 852R 13 861 13 861R 13 862 13 862R 27 114 27 120 27 150 27 163 27 164 27 165 27 533 27 533.1 27 533FMB 27 663 27 664 27 665 27 765 27 853 27 854 27 855 27 865 27 893.30 27 894.30 29 010 29 011 29 012 29 013 29 016/L 29 016/R 29 017 30 764 340 764/DA 30 863/DA 30 864/DA 30 864/F 30 864/FS 30 864/HO 30 865/F 30 865/FS 30 865/HO 30 866/DA 30 866/F 30 866/FS 30 866/HO 31 033 31 033.1 31 133 31 133.1 31 333 31 333.1 31 700 31 701 31 701.30 31 702 31 703.30 31 703V 31 706 31 710 31 711 31 712 31 713V 31 716 31 726 31 736 31 800

28 28 28 28 28 28 28 27 27 26 26 28 28 28 28 28 28 28 28 27 27 27 27 26 26 26 26 22 22 22 22 22 22 21 21 21 22 22 22 22 18 18 18 16 18 18 24 24 24 24 24 24 24 23 23 23 23 23 23 23 23 23 23 23 23 23 23 20 20 20 20 20 20 19 19 19 19 19 19 19 19 19 19 19 19 19 19 18

31 803V 31 806 31 807 31 807.30 31 808 31 810 31 813V 31 816 31 817 31 818 31 826 31 836 32 800.1 32 800.2 32 800.8 32 801.1 32 801.2 32 802 32 803 32 811 32 835 32 840 32 845 32 850 34 005.1 34 005.2 34 005.3 34 006.1 34 006.2 34 006.3 34 007.1 34 007.2 34 007.3 34 010.1 34 010.2 34 010.3 34 011.1 34 011.2 34 028 34 029.3 36 413KE 36 413KE/NC 36 413LE 36 413LE/NC 37 800.1 37 800.2 37 801.1 37 801.2 37 810.1 37 810.2 37 879.5 37 879.6 50 800.0 50 800.3 50 800.3.7 50 800.4 50 800.4.7 50 800.5 50 800.5.7 50 800.15 50 800.15.7 50 800.6 50 800.6CW 51 800.0 51 800.1 51 800.2 51 800.3 51 800.4 51 800.5 51 800.15 51 800.25 52 801 52 802 52 803 52 804 52 805 52 806 53 219.30 53 219.30BB 53 219.45 53 219.45BB 53 219.60 53 219.60BB 53 222.30 53 222.30BB 53 222.45 53 222.45BB 53 222.60

16 16 18 18 18 18 16 16 18 18 16 16 33 33 34 33 33 33 33 33 33 33 33 33 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 39 39 39 39 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 9 9 9 9 9 9 9 9 9 9 14 14 14 14 14 14 13 13 13 13 13 13 13 13 13 13 13

53 222.60BB 53 325.1000 53 325.1000BB 53 332.1500 53 332.1500BB 53 332.1800 53 332.1800BB 53 819.15 53 819.15BB 53 819.18 53 819.18BB 53 819.24 53 819.24BB 53 819.30 53 819.30BB 53 819.45 53 819.45BB 53 819.60 53 819.60BB 53 822.18 53 822.18BB 53 822.24 53 822.24BB 53 822.30 53 822.30BB 53 822.45 53 822.45BB 53 822.60 53 822.60BB 53 832.13 53 832.13BB 53 832.21 53 832.21BB 53 832.28 53 832.28BB 53 833.30 53 833.30BB 54 601.19 54 800.19 54 800.22 54 801.19 54 801.22 54 832.22 54 833.22 54 834.22 57 376.1 57 376.2 57 378DDS 59 738 59 772 59 776.1 59 776.2 59 776.3 59 776.4 59 776.5 59 777.1 59 777.2 59 778.1 59 778.2 59 778.3 59 778.4 59 779.1 59 779.2 59 779.3 60 001.1 60 001.2 60 001.3 60 001.4 60 001.7 60 011.1 60 012.1 60 013.1 60 014.1 60 014.2 60 030 60 031 60 032 60 033 60 034 60 035 60 036 60 037 60 038 60 039 60 040 60 041 60 042 60 043

13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 11 11 11 11 11 11 11 11 7 7 7 7 7 8 8 8 39 39 39 38 38 37 37 37 37 37 37 37 37 37 38 38 38 38 38 30 30 30 30 30 31 31 31 31 31 32 32 32 32 32 32 32 32 32 32 32 32 32 32

60 044 60 045 60 047 60 048 60 051 60 052.1 60 052.2 60 054 60 055 60 056 60 060 60 062 60 063 60 070 60 071 60 072 60 073 60 345.1 60 345.2 60 346.1 60 346.2 60 411.1 60 411.2 60 412.1 60 412.2 60 413.1 60 413.2 60 414.1 60 414.2 60 415.1 60 415.2 60 416.1 60 416.2 60 417.1 60 417.2 60 418.1 60 418.2 60 903.1 60 601 60 602 60 603 60 604 60 605 60 606 60 607 60 608 60 609 60 617 60 618 60 619 60 620 60 621 60 622 60 623 60 624 60 903.2 61 800 61 800.0 61 800.1 61 800.2 61 800.3 80 802 81 801 81 802 81 803 81 804 89 003 89 901

32 32 32 32 31 31 31 31 31 31 31 31 31 31 31 31 31 32 32 32 32 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 34 34 34 34 34 34 34 34 34 34 34 34

FPL1.1 FPL1.2 FPL2.1 FPL2.2 FPL3.1 FPL3.2 FPL5.2 FPP1 FPP2.1 FPP3 FPP5 FPP6.3 FPP7.3 IP H1 IP H2 LA158.19 LA158.22

10 10 10 10 10 10 10 14 14 14 14 14 14 25 25 13 13

46 www.laidlaw.net

As the UK's leading specifier and supplier of architectural hardware, timber doorsets and handrail & balustrade solutions, Laidlaw offers its unique service through a national network of 12 sales offices and trade counters.

www.laidlaw.net Barnstaple Unit 1, Branham Crescent Roundswell Business Park (West) Barnstaple, North Devon EX31 3TD T: 01271 311920 F: 01271 311929

Liverpool 3 - 5 Century Building Summers Road Brunswick Business Park Liverpool, Merseyside L3 4BL T: 0151 709 9438 F: 0151 709 9455

Bristol Unit 8, Riverside Business Park St. Annes Road, St. Annes Bristol BS4 4ED T: 0117 300 3980 F: 0117 980 3058

London The Building Centre 26 Store Street London WC1E 7BT T: 0207 436 0779 F: 0207 436 0740

Cardiff Ty Cefnfor, Ocean Park Cardiff CF24 5PE T: 029 2047 1808 F: 029 2049 0250

Perth PO Box 15, Arran Road Perth PH1 3DU T: 01738 620581 F: 01738 633262

Gateshead Unit 1 Halifax Court Halifax Road Dunston, Gateshead Tyne & Wear NE11 9JT T: 0191 461 4100 F: 0191 461 4101

Salford Centurion House Dakota Avenue, Salford Manchester M50 2PU T: 0161 848 0101 F: 0161 872 9313

Glasgow 4 Clifford Court 171 Woodville Street Ibrox Business Park Glasgow G51 2RQ T: 0141 445 8892 F: 0141 445 8871

Sheffield Unit 4 Sheffield Industrial Estate Surbiton Street Sheffield S9 2DN T: 0114 243 8916 F: 0114 242 6591

Kinmel Bay Unit 37 Tir Llwyd Industrial Estate St Asaph Avenue Kinmel Bay, Rhyl North Wales LL18 5JA T: 01745 332151 F: 01745 332493

Willenhall Strawberry Lane Willenhall West Midlands WV13 3RS T: 01902 600400 F: 01902 600490

To email a sales office use the following format: info.office@laidlaw.net e.g. info.bristol@laidlaw.net

Laidlaw subscribes to NBS Plus which contains full specification clauses for all Laidlaw products and is a RIBA approved supplier of CPD seminars.

chi

tectural

Architectural Hardware Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware, including Access Control, to the UK construction industry. As with all its product portfolios, Laidlaw's huge range of architectural hardware, including the renowned Orbis brand, is designed to comply with European building standards. Handrail and Balustrade Solutions Using a modular system in either stainless steel, nylon, timber or a combination of these, Laidlaw's handrail and balustrade solutions are designed to satisfy each client's specifications. Offering the complete technical service, highly trained staff are involved at every stage of each project, from site surveys and design through to supply and installation.

While Laidlaw has taken every care to ensure the accuracy of information, data and advice contained in this literature, no liability in respect of such information whether given negligently or not can be accepted by the company. Due to variations in the printing process, actual colours may differ from those shown. Laidlaw retains the right to amend the technical specification of any range of equipment shown.

adv

RS 10508

Timber Doorsets Saving up to 40% installation time and eliminating co-ordinating problems between doors and ironmongery, Laidlaw has pioneered the Orbis Timber Doorsets solution which is supplied complete with the door, frame, architraves and factory fitted ironmongery to minimise on-site work.

Sales Office Trade Counter Distribution Centre

Laidlaw also subscribes and is an active member of The Guild of Architectural Ironmongers (GAI) which is a recognised body that promotes standards in integrity and excellence in the business of architectural ironmongery.

Each Laidlaw sales office is supported by a centralised distribution centre at Willenhall which has the capacity to pack and despatch individual items or by doorset.

i membe

ÂŠ Laidlaw Solutions Limited November 2007/L107/001