Orbis Premier Range by Laidlaw Solutions Ltd

Uniclass L4 181

EPIC D181

CI/ SfB (31.5)

Orbis Premier Range

THE LAIDLAW SERVICE Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware to the UK construction industry. Laidlaw is able to offer a wide range of architectural products that combine design and function across a broad band of product categories. This is achieved by working closely with manufacturing partners ensuring consistent quality and performance are achieved from the products offered and by keeping up to date with market requirements and technical specifications to ensure Laidlaw remains at the forefront of the markets it serves. In addition to the renowned Orbis brand the Laidlaw portfolio also incorporates specialist product areas such as Electronic Access Control and Anti-Ligature fittings. Laidlaw is also able to offer a comprehensive system of Orbis Timber Doorsets which are fully compatible with the Orbis range of architectural hardware. For further information on any of the Laidlaw products and services, please refer to the full range of product brochures or alternatively call one of the Laidlaw branches nationwide as listed on the back page of this brochure.

Specification Advice Laidlaw's team of GAI trained consultants is available to assist with all of the detailed product enquiries associated with the increasingly complex subject of hardware specification. Whether it be advice on product compliance for Disability Discrimination Act (DDA) applications or test certification for fire door applications, your local Laidlaw Technical Consultant is always on hand to guide you to the most appropriate specification.

Product Development Orbis products are subject to continual design and manufacturing development in order to improve performance or to meet the changing demands of standards, testing or other building legislation.

Project Management Having provided guidance in the specification and selection of appropriate products, Laidlaw's scheduling team will produce fully detailed, door by door ironmongery schedules along with a full bill of materials. Laidlaw will then project manage the supply of product including the manufacture of special or bespoke items; supply of relevant installation drawings; and, where necessary, certification and delivery schedules. CPD seminars Laidlaw is a RIBA approved provider of CPD seminars and is able to offer specifiers seminars and workshops on a wide range of hardware related subjects including DDA, Doc M and BS 8300 compliance.

Packaging and Delivery Laidlaw will work alongside the customer's project management team to ensure the product arrives on site in the most appropriate form. This could include labelling to the architect's door numbers, or already installed on Orbis Timber Doors. Laidlaw will ensure deliveries are made in full and on time.

1 www.laidlaw.net

ORBIS PREMIER - CONTENTS

THE LAIDLAW SERVICE

ORBIS PREMIER INTRODUCTION

3-4

NEW DUAL FINISH LEVER FURNITURE FOR BACKPLATE SYSTEM

5-6

LEVER BACKPLATE SYSTEM

7-8

LEVER FURNITURE - CONCEALED FIXING CONCEALED BACKPLATES & ESCUTCHEONS

9 10

PULL HANDLES

11 - 12

PUSH PLATES & KICKING PLATES

11 & 13

PULL HANDLE BACKPLATE SYSTEM

14 - 15

OVERHEAD DOOR CLOSERS

16 - 18

ELECTROMAGNETIC DOOR CLOSERS

19 - 20

MORTICE CYLINDER LOCKS & REBATE SETS

21 - 22

CYLINDERS

HINGES

SIGNS & SYMBOLS

25 - 27

ACCESSORIES

STANDARDS & BS EN CLASSIFICATIONS

DDA, APPROVED DOC. M & BS 8300

31 - 33

INDEX

2 www.laidlaw.net

ORBIS PREMIER - INTRODUCTION

A comprehensive and fully co-ordinated range of architectural hardware featuring unique lever and pull handle designs which can be combined with a distinctive backplate system. The unique design features of Orbis Premier are combined with high quality performance and an unrivalled level of production and finish quality suitable for the most high profile of applications. Within the Orbis Premier range is an advanced system of door closers including many which will enable building owners to satisfy their obligations under the Disability Discrimination Act.

Co-ordination of design and finish is achieved across a full range of products ensuring integrated Orbis Premier products can be specified for the full hardware requirement of most buildings.

Orbis Premier hardware can be completely integrated with Orbis Timber Doorsets. Factory preparation for the hardware ensures perfect installation to maximise the high performance and aesthetics of the Orbis Premier hardware. Please refer to our Orbis Timber Doorsets brochure.

Each component in the Orbis Premier range is designed for maximum performance. Products are tried and fully tested to the latest BS EN standards with full certification and CE marking where applicable.

a. Orbis 31 935 overhead closer in Satin Stainless Steel b. Offset elliptical lever 54 921.13FRS9 on Polished Stainless Steel backplate c. Integrated stainless steel hinges form an essential part of the range

3 www.laidlaw.net

ORBIS PREMIER - INTRODUCTION BS EN Performance standards Many of the product types within the Orbis Premier range have been developed specifically to meet or exceed the latest European Standards. Where different grades of compliance are applicable, this will be indicated in the description against each item. More detailed information on standards and BS EN Classifications can be found on page 29 & 30. CE Marking Where CE marking is permitted, items are marked with the CE icon. The CE classification is indicated against each item where this is appropriate. Further information on CE marking and classifications can be found on page 29.

Fire Testing Fire testing is an ongoing process with Laidlaw. Many of the Orbis Premier hardware items have been included on timber fire door tests up to 2 hours and on steel fire doors up to 4 hours. The icon indicates the item has been successfully included in fire tests and the brief details of these are included in the general descriptions.

DDA, Approved Doc. M & BS 8300 The principle of ensuring buildings are accessible to able and less able people alike is manifest in Approved Document M of the Building Regulations and with further guidance in BS 8300 which contains specific dimensional information for certain items of architectural hardware. The disabled symbol is used throughout this document to identify those Orbis Premier items which conform to the requirements of Approved Document M and are therefore appropriate for use in DDA applications. Further information can be found on pages 31 to 33.

Above - 53 922.45DSP pull handles in Dual finish Satin and Polished Stainless Steel.

The products listed within this publication are subject to a 15 year guarantee against defects proved to be the result of faulty manufacture or defective materials and subject to an agreed maintenance programme unless otherwise stated.

Materials & Finishes Orbis Premier products are manufactured using only the highest grade 316 stainless steel. Each Orbis Premier product is finished in a high quality Satin or mirror Polished finish. Orbis Premier also features a Dual finish, combining Polished and Satin Stainless Steel. Please see page 5 for full details.

SS7 Satin Stainless Steel

PS7 Polished Stainless Steel

Ordering Products When ordering products from the catalogue remember to specify the finish code after the product code - e.g 53 833.30BBPS7 In certain cases, an applied finish is used. These are carefully selected to match the main hardware finishes.

DPS Dual finish, Polished & Satin DSP Dual finish, Satin & Polished

Dimensions All dimensions shown throughout this brochure are in mm.

4 www.laidlaw.net

ORBIS PREMIER - LEVER FURNITURE DUAL FINISHES

Combining Finishes The system of components which make up the Orbis Premier backplate system are interchangeable and allow Polished and Satin Stainless Steel finishes to be intermixed. To complement this Laidlaw has developed a Dual finish for selected levers and pull handles.

A Multitude of Combinations With the 54 900.13FRS9 straight and 54 901.13FRS9 return to door lever types available in 2 Dual finish variations (DPS and DSP) and with 4 plate/finish variations, specifiers have a choice of 16 combinations. C A

Dual Finishes There are two combinations of Satin and Polished Stainless Steel finishes available for Orbis Premier lever and pull handles.

Combinations The combinations shown above illustrate the following options:

DSP - Dual Satin Polished finish featuring Satin centre portion with Polished ends.

A - DPS lever / Polished backplate and Satin inserts

DPS - Dual Polished Satin finish featuring Polished centre portion with Satin ends.

C - DSP lever / Polished backplate and Polished inserts

Please note; In all lever handle combinations, the lever is pre-fixed to a rose insert which matches the finish of the ends of the lever.

5 www.laidlaw.net

The combination of Satin and Polished finishes can give a totally different look, even using the same lever and plate designs.

B - DPS lever / Satin backplate and Satin inserts D - DSP lever / Satin backplate and Polished inserts

ORBIS PREMIER - LEVER FURNITURE

All pre-fixed lever and insert rose options have an integral phosphor bronze bearing washer and offer an improved 3 point fixing method: - Levers pre-fixed to rose - Secure M4 bolt through rose fixings at 38mm centres - Break through grub screw fixing into spindle

6 www.laidlaw.net

ORBIS PREMIER - LEVER FURNITURE FOR BACKPLATE SYSTEM Finishes

Lever Handle - Straight Item no. 54 900.13 FRS9

22 x 13

13 135

54 901.13 FRS9

22 x 13

SS7 PS7

•

DSP DPS

•

Unit pair

Finishes

Item no.

Section (mm)

54 920.13 FRS9

22 x 13

•

Item no.

Section (mm)

SS7 PS7

54 921.13 FRS9

22 x 13

SS7 PS7

DSP DPS

Unit pair

19Ø

135

Finishes

19Ø

22 135

7 www.laidlaw.net

Unit pair

135

Lever Handle - Return to Door • Offset elliptical section return to door lever handle • Suitable for use with all Orbis Premier insert plate mountings (see page 7) • 8mm 'Break Through' type spindle for secure grub screw fixing • All stainless steel finishes are Grade 316 • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade)

•

Split follower functions Split follower spindles are also available: FPL3.1 - for doors 38 - 54mm FPL3.2 - for doors 55 - 65mm

Item no.

Section (mm)

Lever Handle - Straight • Offset elliptical section straight lever handle • Suitable for use with all Orbis Premier insert plate mountings (see page 7) • 8mm 'Break Through' type spindle for secure grub screw fixing • All stainless steel finishes are Grade 316 • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade)

•

DSP DPS

Finishes

Lever Handle - Return to Door • Elliptical section return to door lever handle • Suitable for use with all Orbis Premier insert plate mountings (see page 7) • 8mm 'Break Through' type spindle for secure grub screw fixing • All stainless steel finishes are Grade 316 • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade)

SS7 PS7

Specification advice FRS9 suffix denotes levers circlip fixed to Orbis Premier insert roses. Remember to specify Orbis Premier insert backplates and suitable insert escutcheons for use with the lever (see opposite page). Half sets of levers with a half spindle are available to special order.

• Elliptical section straight lever handle circlip fixed to Orbis Premier insert roses • Suitable for use with all Orbis Premier insert plate mountings (see page 7) • 8mm 'Break Through' type spindle for secure grub screw fixing • All stainless steel finishes are Grade 316 • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade)

Section (mm)

•

DSP DPS

Unit pair

ORBIS PREMIER - INSERT BACKPLATE SYSTEM Backplate System for Levers

50 911.72

Finishes

Backplates

• Suitable for use with all Orbis Premier lever handle designs • Suitable for locks with 72mm centres only • SS7 & PS7 finishes are Grade 316 stainless steel • SS7 & PS7 plates 2mm thick Please note, A range of Orbis Commercial round bar levers are also available pre-fixed to insert roses suitable for use with the Orbis Premier range of backplates and rose inserts as illustrated on this page. Please refer to the Orbis Commercial Range brochure for details of round bar lever handles.

50 901.72

Description

SS7

PS7

50 901.72

180 x 60 - radiused

50 911.72

240 x 60 - radiused

• •

Item no.

Unit pair pair

240

180

Backplate System Rose Insert • Improved 3 point fixing - Levers pre-fixed to rose - Secure M4 bolt through rose fixings at 38mm centres - Break through grub screw fixing into spindle • Grade 316 stainless steel • Phosphor bronze bearing washer for extra durability as standard

Backplate System Inserts 51 900.0

51 900.5

51 900.25

Function

SS7

PS7

51 900.0

blank insert

• • • • • •

51 900.3

euro profile

51 900.4

indicator/release

51 900.5

standard turn

51 900.15

large turn

51 900.25

extended turn

Unit single single single single single single

60.5

51 900.15

Item no.

51 900.3

• Suitable for use with Orbis flat backplates only • Suitable for locks with 72/78 mm centres only • All stainless steel finishes are Grade 316 • Suitable for a full range of lock functions • Bathroom function inserts are supplied with 5mm spindle and 8mm adapter sleeve suitable for Orbis Premier lockcases • SS7 & PS7 inserts 2mm thick • Oval profile inserts available to special order. Contact your Laidlaw Technical Consultant for details

Finishes

Backplate Inserts 51 900.4

8 www.laidlaw.net

ORBIS PREMIER - LEVER FURNITURE - CONCEALED FIXING Lever on Rose - Concealed Fix • Low profile unsprung rose fixing available on a range of Orbis Premier & Commercial levers • Levers are circlip fixed to 5mm concealed rose inners • Supplied with standard 8mm 'Break Through' type spindle for secure grub screw fixing • Phosphor bronze bearing washer for extra durability as standard • Improved 3 point fixing - Levers circlip fixed to inner rose - Secure M4 bolt through rose fixings at 38mm centres - Break through grub screw fixing into spindle • Snap on cover conceals fixings • Fixing centres (38mm) compatible with all major lockcase ranges • SS7 & PS7 finishes are Grade 316 stainless steel • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade)

FRS suffix denotes levers circlip fixed to Orbis Premier concealed roses. FRS lever types are supplied with 'Z' type cross-head screwdriver for easy installation.

Specification advice Check lockcase springing is suitable for unsprung lever and rose furniture. Split follower spindles are also available for locks with split follower functions. See below. a

Finishes Item no.

Description

54 900.13 FRS Lever on rose

SS7

•

PS7

•

Unit pair

a - Orbis Premier 54 901.19FRS and 51 800.3 SS7 c/w cylinder and turn b - Orbis Premier 54 900.13 SS7 lever and 50 800.5.7 SS7 plate

Finishes Item no.

Description

54 901.13 FRS Lever on rose

SS7

•

PS7

•

Unit pair

Lever on Plate - Concealed Fix Finishes

Orbis Premier levers as detailed in the table opposite (except Dual Finish) are available as independent items for use with the Concealed Fix backplates shown on page 10. • Phosphor bronze bearing washer for extra durability as standard • Break through grub screw fixing into spindle • SS7 & PS7 finishes are Grade 316 stainless steel • Exceeds the requirements of BS EN 1906 - grade 4 (highest grade)

9 www.laidlaw.net

Item no.

Description

SS7

Return to door lever and spindle assemblly

•

PS7

54 901.13

•

Unit pair

54 900.13

Straaight lever and spindle assemblly

•

pair

Split follower functions Split follower spindles are also available: FPL3.1 - for doors 38 - 54mm FPL3.2 - for doors 55 - 65mm

ORBIS - CONCEALED BACKPLATES & ESCUTCHEONS Backplates - Concealed Fixing • Suitable for use with Orbis Premier lever handles as shown on page 9 • Exceed BS EN 1906 grade 4 when used with Orbis Premier lever handles • Snap on cover conceals fixings • Bathroom turn and indicator options supplied with 5mm spindle and 8mm adapter suitable for door thicknesses from 35 to 54mm • Supplied with self-tapping screws and M4 bolt through fixings 50 800.0

Specification advice Make sure you select the correct backplate to suit the centres of the lock being used. To select a bathroom lock set, be sure to specify a turn and an indicator plate.

50 800.3.7

50 800.4.7

50 800.5.7

72mm centre lockcases

Item no.

Function

50 800.0

blank

180

50 800.3.7

DDA Applications Backplates and escutcheons meet the requirements of BS8300 when used as a package with designated levers

Escutcheons - Concealed Fixing

51 800.0

• Suitable for use in conjunction with all Orbis Commercial & Premier concealed rose mounted lever handles or with pull handles • Snap on cover conceals fixings • Thumbturns complete with 5mm spindle and 8mm adapter sleeve suitable for door thicknesses from 35 to 54mm • Supplied with self-tapping screws for face fixing

51 800.1

51 800.4

50 800.4.7

indicator/release

50 800.5.7

standard turn

50 800.15.7

large turn

51 800.2

51 800.5

euro profile

50 800.15.7

Finishes SS7

• • • • •

PS7

• • • • •

Unit pair pair single single single

51 800.3

51 800.15

51 800.25

Specification advice Extended bathroom turn 51 800.25 is recommended for special needs applications.

Finishes

5 43

60.5

Item no.

Function

SS7

PS7

51 800.0

blank

• • • • • • • •

51 800.1

lever key

51 800.2

oval profile

51 800.3

euro profile

51 800.4

indicator/release

51 800.5

standard turn

51 800.15

large turn

51 800.25

extended turn

Unit single single single single single single single single

10 www.laidlaw.net

ORBIS PREMIER - PULL HANDLE FURNITURE Pull Handles - Elliptical Section Designed to be compatible with 54 900.13 lever handle design

Please Note: these pull handles are also interchangeable with the pull handles in the Orbis Commercial range. For further details refer to the Orbis Commercial brochure.

53 922.18

• Supplied as dedicated bolt through or back to back fixing options c/w fixing pack • Bolt through handles are supplied with fixings FPP3 and back to back handles are supplied with fixing pack FPP5 • Can be used independently or in association with a unique system of backplates and inserts (see page 14) • Standard M8 fixing packs suit doors up to 55mm thick - other thicknesses to special order • Alternative fixing types are also available (see page 13)

Push Plates Designed to be used on the push side of the door with a bolt through or concealed rose fixed pull handle on the pull side. Push plate is used to conceal the bolt through pull handle fixing. • Full radiused ends • Suits bolt through handles up to 450mm centres • Supplied with wood screws

19 Ø

Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a single bolt through pull handle, appropriate push plates are available for fixing to the push side of the door (see below)

ccs

Specification advice For compliance with DocM, we recommend the use of pull handles with 450mm centres or longer.

Pull handle - Bolt through fixing Item no.

180

53 922.24

240

53 922.30

300

53 922.45

450

Pull handle - Back to back fixing Item no.

Centres (mm)

PS7

• • • •

PS7

• • • •

180

53 922.24BB

240

53 922.30BB

300

53 922.45BB

450

• • • •

Size (mm)

SS7

PS7

• • •

Item no. 52 901

360 x 90

52 903

300 x 90

52 905

510 x 90

Unit single single single single

Finishes SS7

53 922.18BB

Push plates

11 www.laidlaw.net

Centres (mm)

53 922.18

Finishes SS7

Unit pair pair pair pair

Finishes Unit single single single

ORBIS PREMIER - PULL HANDLE FURNITURE Pull Handles - Offset Elliptical

Finishes

'Thread side' pull handle

Designed specifically to complement the Orbis offset lever handle design.

Item no.

• Suitable for use with the Orbis Premier backplate system (see page 14) • Supplied as separate 'Thread side' and 'Pin side' handles • Available in PS & SS finishes • Thread side pull handles are supplied c/w FPP3.3 Fixing Pack • Pin side pull handles are supplied c/w FPP5.2 Fixing Pack

Centres (mm)

53 920.18.1

180

53 920.24.1

240

53 920.30.1

300

53 920.45.1

450

SS7

PS7

• • • •

single single single

Finishes

'Pin side' pull handle Item no.

Unit single

Centres (mm)

53 920.18.2

180

53 920.24.2

240

53 920.30.2

300

53 920.45.2

450

SS7

PS7

• • • •

Unit single single single single

53 920.30.1

Specification advice It is important to match the pull handle and fixing type selected. The diagrams on page 13 provide a guide to the correct combinations of fixing and 'Pin side' or 'Thread side' pull handles.

Finishes

'Thread side' pull handle Item no.

53 922.30.1DSP

As with Orbis Premier lever handles, the pull handle range is also available in the unique combinations of Polished and Satin Stainless Steel. The dual finish is available on pull handle sizes and fixing options as shown in the tables opposite. To specify the Dual Finish, simply add one of the following suffixes to the product reference: DPS - For Dual finish Polished centre and Satin ends DSP - For Dual finish Satin centre and Polished ends The examples shown opposite are:

53 922.30.1DPS

Centres (mm)

53 922.18.1

180

53 922.24.1

240

53 922.30.1

300

53 922.45.1

450

DSP

• • • •

Unit single single single single

Finishes

'Pin side' pull handle Item no.

DPS

Centres (mm)

53 922.18.2

180

53 922.24.2

240

53 922.30.2

300

53 922.45.2

450

DSP

• • • •

DPS

• • • •

Unit single single single single

Important Ordering Information • For standard bolt through application order 'Thread side' pull handle only • For back to back applications order 1 No. 'Thread side' and 1 No. 'Pin side' pull handle • Thread side pull handles are supplied c/w FPP3.3 Fixing Pack • Pin side pull handles are supplied c/w FPP5.2 Fixing Pack

53 922.30.1DSP 53 922.30.1DPS

12 www.laidlaw.net

ORBIS PREMIER - PULL HANDLE FIXINGS & KICKING PLATES Bolt through pull handle on backplate used with a push plate on the reverse is fitted to a 44mm door using the unique FPP4 fixing.

Pull Handle Fixings Standard bolt through handles 53 922.18 to 53 922.45 in SS7 and PS7 finishes are supplied as standard with fixings FPP3.5 and back to back handles are supplied with fixing pack FPP5.2. Alternative sizes and fixing types are also available as shown in the table below.

Description FPP1

Secret face fixing for timber doors with threaded plugs and M8 fixing bolts.

Item no.

Door thickness

Finish

FPP1

n/a

FPP3.2 FPP3.3 FPP3.5

40 - 55mm 35mm 55 - 65mm

n/a n/a n/a

For use with Pin side pull handles only

Pin side

FPP3

Bolt through fixing for timber doors with CSK M8 bolts. For use with Thread side pull handles only

Kicking & mid rail plates must be ordered to suit the height and width required. Special designs are also available to order. Plates are supplied with self-tapping wood screws.

Thread side

FPP4

M8 bolt through fixing for timber doors with M3 machine screw fixing for push plate into pull handle fixing bolt.

FPP5

Back to back fixing for timber doors with M8 bolt.

Thread side

Pin side

FPP6

Pin side

FPP4.3 FPP4.4 FPP4.5 FPP4.6

40 - 55mm 40 - 55mm 35mm 35mm

SS7 PS7 SS7 PS7

FPP5.2 FPP5.3

40 - 55mm 35mm

n/a n/a

FPP6.3

10 - 14mm Glass

n/a

FPP7.3

10 - 14mm Glass

n/a

Thread side pull handles only

Thread side

For use with one Thread side and one Pin side pull handle.

Back to back fixing for glass doors with M8 bolt, 13mmĂ&#x2DC; nylon bush and washers. Thread side

FPP7

For use with one Thread side and one Pin side pull handle.

Bolt through fixing for glass doors with M8 'Pig nosed' bolt. For use with Thread side pull handles only

Thread side

Note: Clearance hole for glass door fixings FPP6 and FPP7 - 14mm Ă&#x2DC;

13 www.laidlaw.net

Kicking & Mid Rail Plates

Contact your Laidlaw Technical Consultant for further information.

ORBIS PREMIER - PULL HANDLE BACKPLATE SYSTEM Backplate System for Levers

Pull Plate

• Suitable for use with Orbis Commercial and Premier pull handles with compatible centres • Can be used with insert escutcheons or symbol inserts • Available as identical plates for mounting pull handles back to back or with a push plate for bolt through applications • SS7 & PS7 finishes are Grade 316 stainless steel • SS7 & PS7 plates 2mm thick

Item no.

Length

Centres

SS7

PS7

55 901.18

360mm

180mm

55 901.24

420mm

240mm

55 901.30

480mm

300mm

55 901.45

630mm

450mm

• • • •

Item no.

Length

Centres

SS7

PS7

56 901.18

360mm

180mm

56 901.24

420mm

240mm

56 901.30

480mm

300mm

56 901.45

630mm

450mm

• • • •

55 901.18

Finishes

Push Plate

Please Note: Orbis Commercial pull handle designs with the appropriate centres are also compatible with the Orbis Premier range of backplates and inserts as illustrated on this page. Please refer to the Orbis Commercial brochure for details of Orbis Commercial pull handles.

Unit single single single single

Finishes Unit single single single single

Pull handle centres

Length

Important Ordering Information When specifying 56 901 Push Plates, please order the appropriate FPP4 Fixing pack (see details opposite)

56 901.30

Backplate System Inserts

51 900.3

• Suitable for use with Orbis flat backplates only • Suitable for locks with 72/78 mm centres only • SS7 & PS7 finishes are Grade 316 stainless steel • Suitable for a full range of lock functions • Bathroom function inserts are supplied with 5mm spindle and 8mm adapter suitable for Orbis Premier lockcases • SS7 & PS7 inserts 2mm thick

51 900.15

51 900.4

51 900.5

51 900.0

51 900.25

Finishes Item no.

Function

51 900.0

blank insert

51 900.3

euro profile

51 900.4

indicator/release

51 900.5

standard turn

51 900.15

large turn

51 900.25

extended turn

SS7

• • • • • •

PS7

• • • • • •

Unit single single single single single single

14 www.laidlaw.net

ORBIS PREMIER - PULL HANDLE BACKPLATE SYSTEM Symbol Inserts A series of 50mm diameter insert symbols for use with the Orbis Premier backplate system • Suitable for use with all backplate sizes on push or pull side • Tab prevents rotation and allows suitable inserts to be placed in 4 alternative positions • SS7 & PS7 finishes are Grade 316 stainless steel • SS7 & PS7 inserts 2mm thick

Finishes Item no.

Symbol

SS7

PS7

60 900.1

Male

• • • • • • • • • • • • • • •

60 900.2

Female

60 900.3

Disabled

60 900.4

Baby Change

60 900.5

Unisex toilet

60 900.6

No Smoking

60 900.7

Telephone

60 900.8

Direction Arrow

60 900.9

Shower

60 900.10

Plain Insert

60 900.11

PUSH

60 900.12

PULL

60 900.13

Fire door keep shut

60 900.14

Fire door keep locked

60 900.15 Automatic fire door keep clear

53 922.30DPS pull handle combination in DPS finish, Polished Stainless Steel with Satin Stainless Steel brackets and ends used in conjunction with a 55 901.30.SS7 Satin Stainless Steel backplate and 60 900.2.SS7 symbol insert. The bolt through assembly is completed with a push plate mounted on the inside face of this washroom door.

15 www.laidlaw.net

Unit single single single single single single single single single single single single single single single

ORBIS PREMIER - DOOR CLOSERS

Orbis Premier closers are high specification adjustable power closers which have clean and simple lines, ideally suited for use with Orbis Premier lever and pull handle furniture.

16 1 www.laidlaw.net

ORBIS PREMIER - OVERHEAD DOOR CLOSERS Door Closers Orbis Premier closers are high specification adjustable power closers which have clean and simple lines, ideally suited for use with Orbis Premier round bar lever furniture • Adjustable power units • Fully compliant with BS EN 1154 where stated • CE marked • Fully adjustable for closing speed and latch action • Hold-open and back check facility available • Universal adjustable armset supplied as standard • Each unit supplied with brackets suitable for fig.1 and fig.66 applications • Fully fire tested to BS EN 1634 and suitable for use on timber fire doors up to 2 hr rating • Available with unique Streamline body cover for all closer body variants • 31 800 & 31 810 - no power reduction in fig.1 or 66 applications • Orbis Streamline cover is designed to suite with Orbis Premier elliptical lever furniture • 10 year guarantee

31 947

31 935

31 955 with Streamline cover option in Satin Stainless Steel finish, SS7. 31 955

Opening and closing forces In order to show compliance with requirements for accessibility, the force needed to open the door, measured at the leading edge, from 0˚ must be less than 30N (see page 31 for further information). The size of the door, the accuracy of installation of the hardware, the presence of smoke or draught seals, the need to latch the door, the location of the door will all have a bearing on the force required to open it and as a consequence it may not be possible to provide a definitive statement as to which closers do or do not meet the opening force requirements of the regulations. For guidance purposes we have indicated in the chart opposite those closers which can in principle meet the opening force criteria for accessibility and also the closing force criteria for fire doors. Due to the principles of leverage, the door width is critical in assessing the relevant opening/closing forces. The chart indicates the minimum door leaf width that is possible to achieve the necessary opening force. The maximum leaf width may be governed by the maximum closer power in accordance with BS EN 1154. 17 www.laidlaw.net

Finishes Orbis Premier closers have electrophoretic finishes with arms and brackets to match. ESS - Electrophoretic Satin Stainless (to match SS7) EPS - Electrophoretic Polished Stainless (to match PS7) ESA - Electrophoretic Silk Anodised Aluminium (to match SA7) In addition, a range of colour coated and sprayed metallic finishes complete with matching arms and brackets are available to special order.

ORBIS PREMIER - OVERHEAD DOOR CLOSERS

290

BS EN 1154 Power size

20kg

40kg

60kg

80kg

100kg

120kg

55 (65)

1400mm

Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig.1 applications) only. Hold-Open closers The use of mechanical hold-open closers is NOT PERMITTED on fire door applications.

48 (50)

280 (345)

1250mm

31 947

1100mm

Door width (mm) Door weight (kg)

950mm

264

850mm

31 935 31 945

750mm

Specification advice Fixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions - variables that may be unknown at the time of specification. Specifying an adjustable closer can therefore help to avoid installing an under-powered or over-powered unit.

Streamline cover 31 955 31 965 31 967

(dimensions in brackets)

Features & Functions Standard cover

31 935

31 945

31 947

Streamline cover

31 955

31 965

31 967

2-5

1-6

spring

BS EN 1154 compliant

•

CE Marked

•

Universal adjustable armset

•

Power size (see chart above) Fixed power or spring power adjustable

3 8

1-6

1 1 3

3 8

2-5

1 1 3

BS EN Classifications Orbis Premier closers have been fully tested to the requirements of BS EN 1154 (and BS EN 1155 where applicable) and have been designated with the Classification no. as shown below. Digit 3 applies to power size and depends on the closer specified.

Min. door width (mm)

820

870

Max. door width (mm)

950

Grade of opening angle (see note #)

Adjustable closing speed

•

Adjustable latch action

•

Adjustable back check

•

Delayed Action For delayed action variants suffix the product code with /DA

Adjustable delayed closing action - optional

•

e.g. 31 935/DA

Hold open armset - optional

Fire tested BS EN 1634 on timber doors

•

CERTIFIRE approved

•

# Grade 3 will close a door from 105˚ opening angle

18 www.laidlaw.net

ORBIS PREMIER - ELECTROMAGNETIC DOOR CLOSERS Electromagnetic Hold-Open Designed for use on fire/smoke doors. The unit is controlled by the building fire/smoke detector and alarm system. On operation of the alarm, the hold-open facility is released and the door closes in the normal manner • Adjustable power (sizes 2 - 4) unit with slide track • Fixed power (sizes 3, 4 & 5) units with projecting arm • Fig.1 application • Fully compliant with BS EN 1154 and BS EN 1155 • CE marked • Fully adjustable for closing speed and latch action • Slide track unit suitable for mounting on pull side of the door only • Fully fire tested to BS EN 1634 and suitable for use on fire doors up to 2hr rating • All units available with Standard or Streamline cover options • 2 year guarantee

27 966.30

Operating Modes Fixed strength models are site selectable for either 'hold-open' or 'swing-free' operation. Hold open angle is available from 75˚ up to 170˚ in a figure 1 application. The 'swing-free' facility allows the door to operate as if no closer were fitted. When the power to the closer is cut, or in the event of alarm activation, the closer is reactivated and closes the door. Suitable for Fig.1 or Fig.66 applications.

DDA applications Both operating modes of the electromagnetic door control facilitate access and are specifically recommended in the Building Regulations as a means of satisfying the opening force requirements.

Electrical requirements Operating voltage - 24v AC/DC (+10% - 15%) at 90mA max.

19 www.laidlaw.net

27 964

Materials and construction The Orbis Premier electromagnetic hold-open closers have cast aluminium mechanisms with covers, arms and brackets in steel. Finishes Orbis Premier closers have electrophoretic finishes with arms and brackets/track to match. ESS - Electrophoretic Satin Stainless (to match SS7) EPS - Electrophoretic Polished Stainless (to match PS7) ESA - Electrophoretic Silk Anodised Aluminium (to match SA7)

ORBIS PREMIER - ELECTROMAGNETIC DOOR CLOSERS

345

BS EN 1154 Power size

570

20kg

40kg

60kg

80kg

100kg

120kg

1400mm

1250mm

Door width (mm) Door weight (kg)

1100mm

27 983 27 984 27 985

950mm

280

850mm

27 963 27 964 27 965

750mm

Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig.1 applications) only.

65 (76)

290 (345)

48 (50)

27 966.30 27 988.30 (cover dimensions shown in brackets)

Features & Functions Standard cover

27 963

27 964

27 965

27 966.30

Streamline cover

27 983

27 984

27 985

27 986.30

2-4

Fixed

Spring

•

Power size (see chart above) Fixed power or spring power adjustable BS EN 1155 compliant CE Marked

•

‡

Projecting arm (P) or Track arm (T)

Min. door width (mm)

Max. door width (mm)

950

1100

1250

1100

Hold Open Function

•

Swing Free Function

•

Grade of opening angle (see note #)

Adjustable closing speed

•

Adjustable latch action

•

Adjustable back check

option

Adjustable delayed closing action

Fire tested BS EN 1634 on timber doors

•

CERTIFIRE approved

•

3 8 3 1 1 3 BS EN Classifications Orbis Premier closers have been fully tested to the requirements of BS EN 1155 and have been designated with the Classification no. as shown above. Digit 3 applies to power size and depends on the closer specified.

* Please Note: there is no minimum door width limit for electromagnetic hold open or swing free door closers

# Grade 3 will close a door from 105˚ opening angle ‡ Currently undergoing CE Testing

20 www.laidlaw.net

ORBIS PREMIER - MORTICE CYLINDER LOCKCASES Dual Profile Mortice Lockcases

11 961

An integrated series of modular cylinder mortice lockcases for use with either oval or euro profile cylinders designed to meet the requirements of BS EN 12209

11 962R

Item no.

Function

13 961R

latch only

11 961R

sashlock

12 961R

deadlock

13 962R

bathroom lock

10 961R

nightlatch

SS7

• • • • • • • •

10 961.1R nightlatch with holdback escape sashlock

11 962R *

10 962R * nightlatch with anti-thrust

Item no.

Function

13 961

latch only

11 961

sashlock

12 961

deadlock

13 962

bathroom lock

10 961

nightlatch

SS7

10 961.1

nightlatch with holdback

11 962 *

escape sashlock

12 963

sliding door lock

10 962 *

• • • • • • • • •

nightlatch with anti-thrust

single single single single single single single

PS7

Unit single single single single single single single single single

For 10 962 please specify LH or RH

RH Inward Fig.2

LH Outward Fig.3

For 11 962 please specify Fig.1, Fig.2 Fig.3 or Fig.4

RH Outward Fig.4

Fire Door Applications When used on fire doors, intumescent packs need to be specified IP L1 - to suit all Orbis Premier European style lockcases For 30 minute fire door applications specify 1 pack per lockcase. For 60 minute fire door applications specify 2 packs per lockcase.

13 962R - bathroom lock 23

165

21,5

45 32

195

165

235

21,5

235

Inward opening doors

LH Inward Fig.1

21 www.laidlaw.net

Unit single

* 10 962 & 11 962 lockcases are handed (see chart below for guidance)

11 961R - sashlock

PS7

Finishes

Square forend

Outward opening doors

• Precision manufactured slimline case with 9 function variants • Modular design allows interchangeability of lock models • Meets the requirements of BS EN12209 and dimensionally compatible with DIN18251 • BS EN 12209 Grade 3 category of use (highest grade) • 60mm backset & 72/78mm centres • Patented spring clip follower retains the lever spindle for a firm positive assembly • Bolt through fixings at lever and cylinder positions • 20mm double throw deadbolt • Quick reversible latchbolt without opening the lockcase • Springing suitable for unsprung lever furniture • Cylinder operates deadbolt and latchbolt • 2 part forend in grade 304 stainless steel with matching strike plate • Optional radiused or square forend styles • Meets BS 8300 dimensional recommendations making it suitable for DDA applications • Sliding door lock suitable for Euro profile cylinders only • Rebate kits available • 12 month guarantee

Finishes

Radiused forend

13 962

ORBIS PREMIER - MORTICE CYLINDER LOCKS & REBATE SETS Specification advice Escape sashlocks 11 962 & 11 962R have split followers and require the use of lever handles with split spindles. Please specify fixed rose lever furniture and compatible split follower spindle - see page 6 or page 9 for details.

Dual Profile Mortice Lockcases The Orbis Premier lockcase encompasses all the lockcase requirements of a building in a single lock case package (except sliding door locks). The range includes the following functions: Latch - for latched doors requiring no security Sashlock - providing latch and deadbolt which can be operated by cylinder from either side

12 963 - sliding door lock 93

Deadlock - providing deadbolt locking only operated by cylinder

235

165

21,5

Nightlatch - for latched doors which can be operated by lever handle from inside and by cylinder from outside. Available with or without the ability to hold back the latch to provide free access

Bathroom lock - providing latch and deadbolt thrown by thumbturn operation

Escape sashlock - providing a sashlock operation where the latch and deadbolt can be withdrawn simultaneously using the inside lever handle to meet EN 179 for Emergency Escape applications.

Sliding door lock - incorporating a special hook bolt for use on sliding doors

12 961 - deadlock

Rebate Sets for Cylinder Locks The rebate set will convert the meeting stiles of a rebated pair of doors so that the standard mortice lock can be used. • Available in 13mm and 25mm rebate depths • Strike plates produced in Grade 316 stainless steel • Suitable for square forend locks only

09 903

09 905

Lock ref:

13mm rebate

25mm rebate

13 961

09 903

09 905

11 961

09 913

09 915

12 961

09 923

09 925

13 962

09 913

09 915

10 961

09 903

09 905

10 961.1

09 903

09 905

11 962

09 913

09 915

12 963

22 www.laidlaw.net

ORBIS PREMIER - CYLINDERS Cylinders

Single cylinder

Orbis Premier features 2 integrated cylinder systems which are suitable for use with all Orbis Premier cylinder mortice lock cases • 10 pin security • Reversible flat key system • EN 1303 Grade 6 Key Security • EN 1303 Grade 6 Durability • EN 1303 Grade 1 Attack Resistance (Premier S) • Tested to 100,000 cycles • Available as masterkeyed or standard differ variants. Supplied with 2 differ keys • 2 year guarantee • Available in satin nickel finish as standard. Other finishes available to order. Please contact your Laidlaw Technical Consultant for details.

Single thumbturn

Double cylinder 01 903.1

01 923.1

01 933.1

Euro profile

40mm

01 903.1

45mm

01 903.2

50mm

01 903.3

Length

Euro profile

40mm

01 913.1

45mm

01 913.2

50mm

01 913.3

Length

Euro profile

01 905.1 60mm

01 923.1

70mm

01 923.2

80mm

01 923.3

Length

Euro profile

60mm

01 933.1

70mm

01 933.2

80mm

01 933.3

variable

Double cylinder & turn

For a range of Oval profile cylinders please refer to our Orbis Commercial Range brochure

Rim cylinder

60/70/80

34Ø

Length

32Ø

Rim mortice cylinder

01 905.1

01 904.1

When specifying Premier S cylinders, use the suffix S after the product code e.g. 01 923.1S 01 904.1

10 Pin key bitting system produces over 1.6 million key differs Anti pick profiled Brass pins and drivers

01 905.1

Clutch cam fitted as standard to Premier S cylinders to allow operation even if the key has been left in the other side

Hardened steel pin and driver in first position protects from drilling

NB: not applicable to 01 913, 01 904.1 and 01 905.1 Orbis Premier Premier S cylinders benefit from the additional feature of a 'Snap Resistant' laminated core. Premier and Premier S cylinders can be used in conjunction, allowing specifiers to use the higher grade attack resistance of Premier S on perimeter doors only within the same master key suite.

Special driver profile provides “pick protection” on Premier S range

DIN compatible Sintered steel cam provides push resistance to prevent the cylinder being forced out of the lockcase

Premier S cylinders have a patented laminated steel core that provides snap resistance to both flexural and pulling test. The core is also visible from both ends to provide a visual deterrent.

23 www.laidlaw.net

Bump resistant device fitted as standard to Premier S cylinder

Specification advice Select the cylinder length to suit the combined thickness of the door and the hardware. The minimum cylinder projection is required for visual and security reasons. For locks fitted off-centre within the door thickness, offset cylinders are available to special order.

ORBIS PREMIER - HINGES Concealed Bearing Hinges

Square corner hinges

• Fixed pin • Triple knuckle • Concealed, self lubricating porous bronze bearing • Exceed BS EN 1935 grade 13 suitable for doors up to 120kg (Weight based on 3 hinges per door leaf) • Radiused and square corner versions • Maintenance free • Stainless steel versions are Grade 316 • Supplied with 32mm x No.10 stainless steel woodscrews • Machine screws available on request for metal doors/frames • Security stud option

37 901.2

37 900.2

102 x 76mm

37 901.2

102 x 102mm

Item no.

Size (mm)

37 900.1

102 x 76mm

37 901.1

102 x 102mm

Finishes SS7

• •

PS7

• •

Unit single single

Finishes SS7

• •

PS7

• •

Unit single single

Specification advice Concealed bearing hinges are suitable for all types of internal and external applications. Doors up to 2250mm high require 3 hinges per leaf. Doors over 2250mm high require 4 hinges per leaf.

102

37 900.1

102

10mmR

37 901.1

Clockwise closing Left hand

102

10mmR

102

Fire door applications When used on a fire door, intumescent packs need to be specified IP H1 - to suit 76 x 102mm hinges IP H2 - to suit 102 x 102mm hinges For 30 min. fire door applications specify 1 pack per pair and a half of hinges For 60 min. fire door applications specify 2 packs per pair and a half of hinges.

Size (mm)

Radiused corner hinges

Finishes SSS - Satin Stainless Steel

Applications Hinges 102 x 76mm are suitable for doors with a minimum thickness of 35mm. Hinges 102 x 120mm are suitable for doors with minimum thickness of 44mm. Radiused corner hinges are generally recommended for machine prepared doors and frames.

37 900.2

Item no.

Anti-clockwise closing Right hand

24 www.laidlaw.net

ORBIS - SIGNS & SYMBOLS Tactile Symbols The use of tactile signage is a requirement of Part M2 of the Building Regulations 1991 and it is recognised that use of tactile signs ensures people with visual impairments are considered under the requirements of the Disability Discrimination Act. Orbis tactile signs incorporate a combination of visual identification, Braille, raised symbols and letters to assist visually impaired people to locate facilities within a building.

60 001.3

60 001.2

Item no.

Symbol

60 001.1

male

60 001.2

female

60 001.3

disabled

60 001.4

baby change

60 001.7

telephone

PVC

• • • • •

Unit single single single single single

• High contrast ivory on dark blue signs • Self adhesive back for easy fixing to most flat surfaces

Symbols A comprehensive range of face fixed symbols for general application in WC and washroom facilities and on fire door applications. • Supplied with woodscrews • 90mm diameter • Available in SS7 and PS7 finishes

Finishes Item no.

Symbol

SS7

PS7

60 901.1

Male

• • • • • • • • • • • • • • •

60 901.2

Female

60 901.3

Disabled

60 901.4

Baby Change

60 901.5

Unisex Toilet

60 901.6

No Smoking

60 901.7

Telephone

60 901.9

Shower

60 901.11

PUSH

60 901.12

PULL

60 901.13

Fire door keep shut

60 901.14

Fire door keep locked

60 901.15 Automatic fire door keep clear

25 www.laidlaw.net

60 901.S

STAFF

60 901.T

TOILETS

Unit single single single single single single single single single single single single single single single

ORBIS - SIGNS & SYMBOLS Fire Exit Signs 60 411.1 - 60 411.2

Fire exit signs are used on doors, emergency or fire escape routes. The Orbis Premier range of fire exit signs incorporates 75mm letter height to comply with Fire Precautions Act 1971 and include 'symbol only' versions to suit EC Council Directives. • Designed to comply with EC Council Directive 92/558/EEC and Fire Precautions Act 1971 • Supplied with woodscrews or self adhesive pads for alternative fixing method • All signs available in the following finish and fixing combinations:

Aluminium - screw fixed Aluminium - self adhesive Vinyl - self adhesive Plastic - screw fixed Plastic - self adhesive

Photoluminescent Signs The signs shown on this page are also available in photoluminescent material which are energised by exposure to light. When the light source fails, the material emits a highly visible luminescense which lasts for several hours. The natural photoluminescent daylight colour of light green has been officially recognised in BS 5499 and BS 5378 as suitable for use in safety signs.

60 011.1

60 412.1 - 60 412.2

60 411.1 - 60 411.2

60 414.1 - 60 414.2

60 413.1 - 60 413.2

Please Note The signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown.

60 013.1 - 100mm x 630mm 60 417.1 - 60 417.2

60 416.1 - 60 416.2

60 014.1 - 100mm x 630mm

60 415.1 - 60 415.2

FIRE EXIT FIRE EXIT

60 014.2 - 200mm x 600mm

FIRE EXIT

Break glass to reach latch in event of fire

Break glass bolt to open in event of fire

FIREPushEXIT 60 071 - 75mm x 150mm

bar to open

60 055 150mm x 150mm

60 051 225mm x 225mm

FIRE EXIT

60 060 - 100mm x 140mm

60 418.1 - 60 418.2

Dimensions .1 100mm x 240mm .2 150mm x 360mm

Push pad to open

Light switch for fire escape

60 011.1 - 100mm x 630mm

60 012.1 - 100mm x 630mm

FIRE EXIT

Sizes The standard signs are available in the sizes shown. All the signs are available in other sizes to special order.

FIRE EXIT FIRE EXIT FIRE EXIT FIRE FIRE EXIT EXIT FIRE EXIT FIRE FIRE EXIT EXIT FIRE EXIT FIRE EXIT

Light switch for emergency exit 60 062 - 100mm x 140mm

60 070 - 75mm x 150mm

Push bar to open

60 056 - 150mm x 280mm

External emergency light switch 60 063 - 100mm x 140mm

Break glass/cover in event of fire

60 072 - 75mm x 150mm

Break glass for key in event of fire

60 073 - 75mm x 150mm

Push bar to open 60 054 - 140mm x 470mm

Push bar to open 60 052.1 - 65mm x 280mm 60 052.2 - 130mm x 565mm

26 www.laidlaw.net

ORBIS - SIGNS & SYMBOLS Safety & Security Signs Safety and security signs are mandatory and require a specific behaviour or action to be taken. By separating the symbol and the wording the signs are designed to comply with EC Council Directive 92/58/EEC.

60 031

• Designed to comply with EC Council Directive 92/58/EEC • All signs have white lettering on blue background • Supplied with woodscrews or self adhesive pads for alternative fixing method • Dual language signs in Welsh and English are also available • All signs are available in the following finish and fixing combinations:

Aluminium - screw fixed Aluminium - self adhesive Vinyl - self adhesive Plastic - screw fixed Plastic - self adhesive

Sizes Signs 60 030 to 60 048 are 80mm x 80mm. Signs 60 345.2 & 60 346.2 are 400mm x 300mm. Signs 60 345.1 & 60 346.1 are 200mm x 150mm. 60 036

Other sizes available to order along with non-standard signs. Please contact your Laidlaw Technical Consultant for further details.

Fire escape keep clear

Fire exit keep clear

Please Note The signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown.

60 345.1

60 345.2 - 400mm x 300mm

60 346.2 - 400mm x 300mm

Fire escape keep clear

Fire exit keep clear

60 345.1 - 200mm x 150mm

Automatic fire door Keep clear

60 030

Alarm will sound if this door is opened

60 036

This door is connected to the alarm system and must not be opened except in emergency

60 042

27 www.laidlaw.net

Fire door Keep locked

60 031

Keep locked shut 60 037

This door must not be locked or bolted when premises are occupied

60 043

Secure door open when premises are occupied

60 032

Close this door 60 038

Fire door keep shut when not in use

60 044

60 346.1 - 200mm x 150mm

Fire check door Keep clear This door will automatically close when the alarm system is operated Test release device weekly

60 033

Automatic fire door Keep clear Close at night

60 039

Close at night and in emergency

60 045

This door to be kept locked shut when not in use

60 034

Remove security fastening when premises are occupied

60 040

This door must be kept closed

60 047

Keep unlocked during working hours

60 035

Fire door Keep shut

60 041

Close this door at night

60 048

ORBIS PREMIER - ACCESSORIES Door Stop

Finishes

Designed to limit the opening of the door and to protect door hardware from damage

• Floor mounted • Designed to complement Orbis Premier elliptical section lever and pull handles

30Ø

Floor door stop Item no. 32 902

Dimensions (mm)

SS7

PS7

30 x 30

•

Unit single

32 902

Flush Pulls 61 900

Item no. 61 900

Size (mm) 90 x 90

SS7

PS7

•

Unit single

• Supplied with self-tapping screws for single sided fixing • Flush pull suitable for doors 34mm thick minimum

Finishes

Flush pull

Indicator Bolt

89 901

• To suit 18 - 44mm door thickness

Finishes

Indicator bolt

A surface mounted bolt which features a large turn and for mounting back to back with emergency release/indicator.

Item no. 89 901

Size (mm) 75 x 52

SS7

•

PS7

•

Unit single

For further accessories, please refer to our Orbis Commercial Range brochure

Card Frames

Finishes

Sliding insert card frames are suitable for applied or engraved lettering • Screw fixed backplate • Slide in inserts in matching finish and clear PVC

Item no.

Dimensions (mm)

SS7

PS7

60 903.1

60 x 60

60 903.2

60 x 180

• •

Unit single single

60 903.2

60 903.1

28 www.laidlaw.net

STANDARDS & BS EN CLASSIFICATIONS The standards compliance of Orbis Premier products falls into 3 categories • Performance testing to the latest European standards, including CE marking where this is appropriate • Suitability for fire & smoke doors with products successfully included on timber and steel door fire tests • Compliance with the requirements of Approved Document M of The Building Regulations and BS 8300, and thereby considered suitable for use in DDA applications BS EN Standards are the benchmark for product performance in several major product areas within architectural hardware. Each standard prescribes a set of test procedures for products which are selected at random from stock production items. The test data and product evaluation produces a multi digit classification code which runs in parallel across each product area (or as close as practically possible). The relevant BS EN standards are summarised opposite. Further details of these BS EN standards are available from The Association of Builders Hardware Manufacturers at www.abhm.org.uk

CE Marking is applicable only to those products where the BS EN Standard has been harmonised under the Construction Products Directive.

BS EN 1906 is the European standard for 'Lever handles & knob furniture' and is applicable only to items which are used to operate locks or latches. Testing and evaluation results in an 8 digit code.

Digit 1- Category of Use (Grades 1 to 4) Grade 3 is high frequency use by the public with a high chance of misuse. Digit 2 - Durability (Grade 6 or 7) Testing to 100,000 (Grade 6) or 200,000 cycles (Grade 7) Digit 3 - Door Mass (No requirement)

3 7

1-4

6-7

Digit 4 - Fire Resistance (Grade 0 or 1) Grade 0 is not suitable for fire door applications

- 1 0 3 2 U -

0-1

0-4

ABU

Digit 5 - Safety (Grade 0 or 1) Digit 6 - Corrosion Resistance (Grade 0 to 4) Grade 3 is the minimum for external applications

Example Orbis 54 901.13 lever classification 37-1032U

Digit 7 - Security (Grade 0 to 4) Digit 8 - Type of Operation (Type A, B or U) Type U is unsprung lever furniture

BS EN 12209 is the European standard for 'Mechanically Operated Locks and Latches'. The standard is wide ranging and covers physical testing of the lock and also classifies it according to the method of operation. Testing and evaluation results in an 11 digit code. BS EN 12209 is harmonised under the Construction Products Directive and CE marking of approved products is permitted.

3 X 8 1 0 F 2 B A 2 0

1-3

A-W

1-9

0-1

0-G

1-7

ABU

0-H

0-4

0-H

Example Orbis 11 951 Lockcase classification 3X810F2BA20

Digit 1- Category of Use (Grades 1 to 3) Grade 3 is high frequency use by the public with a high chance of misuse. Digit 2 - Durability (Grades A to W) A complex grading sytem based on a combination of side load and test cycles Digit 3 - Door Mass (Grades 1 to 9) A complex grading system based on a combination of door mass and maximum closing force required Digit 4 - Fire Resistance (Grade 0 or 1) Grade 0 is not suitable for fire door applications Digit 5 - Safety (Grade 0 or 1) Digit 6 - Corrosion Resistance (Grade 0 & A-G) Digit 7 - Security (Grade 1 to 7) Digit 8 - Field of Door Application (Type A to R) Digit 9 - Type of Key Operation (Grade 0 & A to H) Digit 10 - Type of Spindle Operation (Grade 0 to 4) Digit 11 - Key Identification (Grade 0 & A to H)

BS EN 1154 is the European standard for 'Controlled Door Closing Devices'. The standard measures mechanical door closer performance resulting in a 6 digit classification.

BS EN 1155 is a parallel standard for 'Electrically Powered Hold-open Devices' and is therefore relevant to Electromagnetic door closers. Such closers must satisfy the requirements of both standards, BS EN 1154 and BS EN 1155. BS EN 1154 and BS EN 1155 are both harmonised standards and CE marking became mandatory in 2004

Digit 1- Category of Use (Grades 3 to 4) (Grade 3) Defines the angle from which it will close the door Digit 2 - Durability (Grade 8 only) (Grades 5 to 8) Grade 8 describes 500,000 test cycles for both standards but is the only grade available in BS EN 1154 Digit 3 - Door Mass (Grades 1 to 7) (Grades 3 to 7) Identifies the closing power of the closer by max. door width and weight (see chart below) Power size

4 8 3 1 1 4

3-4

1-7

0-4

3 8 3 1 1 4 3

5-8

3-7

0-4

BS EN 1154 classification BS EN 1155 classification

Example Orbis 31 935 closer classification 382-5113

29 www.laidlaw.net

max. door size width mm 750 weight kg 20

2 850 40

950 1100 1250 1400 1600 60 80 100 120 160

Digit 4 - Fire Resistance (Grade 0 or 1) (Grade 1) Grade 0 is not suitable for fire door applications. Grade 1 must be supported by fire tests to BS EN 1634 Digit 5 - Safety (Grade 1only) Grade 1 identifies the closer is hazard free Digit 6 - Corrosion Resistance (Grade 0 to 4)

STANDARDS & BS EN CLASSIFICATIONS

Fire Testing Individual products are not in themselves fire tested, but are included as an integral part of a fire test carried out on a timber or steel fire door. As a consequence, the details of the test, the construction of the door, the inclusion of intumescent material etc must be considered when specifying products suitable for use on a fire door. Where Laidlaw products are indicated as suitable for fire door applications, the products have been successfully included on the test door which has achieved the stated rating. Laidlaw holds comprehensive test certification for all appropriate products and these are available on request.

BS EN 1125 & BS EN 179 Products which are designed to provide safe and effective escape from a building in an emergency situation are covered by two European standards which have clearly defined applications. BS EN 1125 is the European standard for 'Panic Exit Devices'. The primary determining factor is that a 'Panic' device must be fitted where members of the public are present and have no prior knowledge of the exit or the hardware. BS EN 179 is the standard covering 'Emergency Exit Devices'. In 'Emergency' situations it is assumed the occupants will have prior knowledge of the exit and a panic situation is unlikely to occur. Testing and evaluation to each standard results in a 9 digit code. BS EN 1125 and BS EN 179 are harmonised under the Construction Products Directive and products must therefore carry the CE mark.

Digit 1- Category of Use (Grades 3) Grade 3 is high frequency use by the public with a high chance of misuse. Digit 2 - Durability (Grades 6 or 7) Cycle testing, Grade 7 having undergone 200,000 cycles Digit 3 - Door Mass (Grades 5 or 6) Determined only by door mass of 100g or 200kg Digit 4 - Fire Resistance (Grade 0 or 1) Grade 0 is not suitable for fire door applications Digit 5 - Safety (Grade 1 only) All panic and emergency exit devices have a critical safety function Digit 6 - Corrosion Resistance (Grade 3 or 4) Digit 7 - Security (Grade 2 only) (Grade 2 - 4 in BS EN 179) Digit 8 - Projection of Device (Grade 1 or 2) Grade 2 is low projection, less than 100mm

3 7 6 1 1 4 2 2 A 3

6-7

5-6

0-1

3-4

1-2

A-B

Example Orbis 59 871 Panic Device classification 37611422B (see Orbis Commercial brochure for details)

BS EN 1935 is the European standard for 'Single Axis Hinges' used on doors and windows. Testing and evaluation of the product results in a 8 digit code. BS EN 1935 is harmonised under the Construction Products Directive and products must therefore carry the CE mark.

Digit 9 - Type of Device (Type A or B) BS EN 1125 - Type A is a pushbar operation BS EN 1125 - Type B is touchbar operation BS EN 1125 - Type A is with lever handle operation BS EN 1125 - Type B is with push pad operation

Digit 1- Category of Use (Grades 1 to 4) Grade 3 is heavy duty use. Digit 2 - Durability (Grades 3, 4 or 7) Cycle testing, Grade 7 having undergone 200,000 cycles Digit 3 - Door Mass (Grades 0 to 7) Table of door mass from 10kg up to 160kg Digit 4 - Fire Resistance (Grade 0 or 1) Grade 0 is not suitable for fire door applications

3 7 6 1 1 3 0 13

1-4

3-4-7

0-7

0-1

0-4

0-1

1-14

Example Orbis 37 901.1 hinge classification 37611422A

Digit 5 - Safety (Grade 1 only) All hinges have a critical safety function Digit 6 - Corrosion Resistance (Grades 0 to 4) Grade 3 is high resistance Digit 7 - Security (Grade 0 or 1) Grade 0 is not suitable for burglar resistance Digit 8 - Hinge Grade (Grades 1 to 14) Grading is by combination of test cycles and door mass. Grade 13 is 200,00 cycles of a door mass of up to 120kg

30 www.laidlaw.net

DDA, APPROVED DOC. M & BS 8300 The implementation of legislation in 1996 made it a legal duty on those responsible for buildings used by the general public, and employers responsible for places of work, to ensure that the building and its facilities are accessible to disabled people. The aim of The Disability Discrimination Act (DDA) is to make it a duty to avoid discrimination againsts disabled people and this duty requires that Service Providers make "reasonable" adjustments to the design of the building in order to provide this universal level of access.

The details on this page are a simple summary of the primary sources of information related to the use of hardware products in order to satisfy disabled access. The Disability Discrimination Act It is important to remember that the Disability Discrimination Act is civil rights legislation and does not set out specific requirements or guidance in the design of buildings. As such it is therefore not appropriate to attach any notion of conformity to products, such as "DDA compliant" or "Conforms to DDA requirements". The legislation came into force on 1st October 2004. Any new building or alterations to existing buildings, in order to satisfy obligations under the DDA, must comply (in England & Wales) with The Building Regulations, and in particular, the 2004 edition of Approved Document M (ADM) which became effective in May 2004. Where certain issues are not covered in ADM, further reference will be made to BS 8300. Further detailed information can be obtained from the following: Office of the Deputy Prime Minister www.odpm.gov.uk Association of Buildiers Hardware Manufacturers www.abhm.org.uk BSI Customer Services cservices@bsi-global.com Office of Public Sector Information www.uk-legislation.hmso. gov.uk Disability Rights Commission www.drc-gb.org Guild of Architectural Ironmongers www.gai.org.uk

31 www.laidlaw.net

Approved Document M (ADM) The main requirements set out in ADM are, as with all parts of The Building Regulations, performance based and the guidelines set out in the document are recognised as one way of achieving the requirements. The scope of the requirements are clearly set out, requiring that provision is made for people to "a) gain access to and b) use the building and its facilities". This includes the provision of sanitary accomodation in domestic and non-domestic buildings. ADM applies not only to new building but also to alterations and extension of existing buildings. Where certain issues are not covered within ADM, further reference will be made to BS 8300.

BS 8300:2001 This standard provides guidance on good practice in the design of buildings to make them suitable for use by disabled people. The standard is often used as a supplement to ADM and includes more specific dimensional guidance, particularly regarding the sizes of door operating hardware.

ADM contains a number of very specific requirements for the following aspects related to architectural hardware specification.

BS 8300 contains the following recommendations related to architectural hardware specification.

Accessible Doors ADM recognises that negotiating entrance doors can be difficult for the general public, not just disabled people: parents with children, those carrying luggage or with pushchairs etc. It is stated within ADM that doors which are required to be self closing must require a force no greater than 20N at the leading edge in order to open them. In most practical applications "A powered door opening and closing system .... is the most satisfactory solution for most people" (ADM 2.10). Although the 20 Newtons ‘rule’ technically still exists it has been generally superceded by a two-phase criteria established within BS 8300 in 2005. This states a maximum opening force of 30N at the initial opening stage (0˚ to 30˚), reducing to 22.5N from 30˚ to 60˚ opening angle.

Accessible Doors Aside from the ‘headline’ figures of ADM, the guidance in BS 8300 points clearly to the use of powered solutions including low energy operators to achieve the level of accessibility required on external doors (including recommendations for the positioning of any manual controls.

Fire & Smoke Doors BS EN 1154 requires fire doors to be held closed by a door closer with a minimum power size 3. This requires a force in excess of 20N (see chart below) and therefore puts it into conflict with the 20N opening force requirement of ADM. In these circumstances ADM recommends the use of electromagnetic hold open or low energy door operators. For fire doors within corridors the preference is for electromagnetic hold open units. Where privacy is still a requirement, such as doors to individual rooms, an electromagnetic device which offers a 'swing free' facility is preferable.

Fire & Smoke Doors Doors to escape stairs and final exit doors are not specifically covered in ADM. In BS 8300 it is considered suitable to use a conventional door closer in these cases, as such doors are likely to be opening in the direction of escape (ie push to exit). In these situations BS 8300 recommends a maximum opening force of 30N.

BS EN 1154 BS EN 1154

size 1

size 3

BS EN 1154 min. closing moment

9 Nm

18 Nm

Min. closing force (moment/door width)

10.59 N

21.17 N

BS EN 1154 min. closer efficiency

50%

55%

Corresponding min. opening force

21.18 N

38.5 N

Note: calculations are based on a door leaf width of 850mm.

Internal Doors For internal doors which need to be self closing for privacy or environmental reasons, they must meet the maximum opening force criteria of 20N. In these circumstances a high efficiency variable power door control is required. When set to the lowest strength (size 1) to reduce the opening force it may cause problems in latching the door, especially in locations which may be susceptible to drafts or air pressure differences. Locks with a 'soft action latch' and high quality hinges will help in making sure the door latches properly each time.

Closing & Opening forces As can be seen from the chart opposite, a door closer power size 1 with only the minimum efficiency allowed in the EN standard (50%) will not satisfy the maximum opening force to satisfy the 20N limit in ADM. Also clearly evident is the fact that a power size 3 closer (the min. allowed in satisfying the requirements for a fire door) has an opening force at the edge of the door beyond the 30N maximum allowed in the revised regulations. Only high efficiency closers will therefore meet the dual requirements for an accessible fire door.

DDA, APPROVED DOC. M & BS 8300

Lever handle dimensions

Approved Document M (ADM)

BS 8300:2001

Door Opening Hardware Guidance on the specification for door hardware falls into 2 main categories

Door Opening Hardware BS 8300 is more detailed in its recommendations, prescribing dimensional parameters for locks & latches, lever and pull handle furniture.

- ability to grip and operate the hardware - ability to visually locate the hardware

19mmØ 45mm minimum 'generous length'

Lock & latch critical dimensions BS 8300

Ability to grip and operate the hardware The requirement within ADM is that "where fitted with a latch, the door opening furniture can be operated with one hand using a closed fist, e.g. a lever handle" (ADM 2.17). Whilst no specific dimensional requirements are laid down in ADM, such recommendations are covered in BS 8300.

72mm minimum

It is a requirement of ADM that external handles (ie those used to open manual external doors), should not be 'cold to the touch'. Whilst most people will find a bare metal handle unpleasant to grip in the depths of winter, for some, particularly elderly people, it can be quite painful.

Pull handle recommendations - BS 8300

Locks & latches To improve physical and visual access to the lever and lock keyway, the distance from the edge of the door and between the lever and keyway should be maximised; "..the cylinder should either be above the lever handle, or the minimum distance between the handle and the keyway .. should be 72mm." (BS 8300 - 6.5.3.2) It also requires a backset of 54mm minimum (from edge of door to the lockcase operating centre - see diagram opposite). Lever handles The principal requirements are that "where possible, door opening furnitue with a lever action should be used .... without tightly grasping it or twisting the wrist e.g by using a closed fist".It also recommends levers return to the door face at the open end to aid the grip and avoid catching clothing. Dimensional characteristics for lever handles are covered by Fig. 17 of BS 8300. See diagram opposite. Whilst lever handles are the preferred solution, there are circumstances where other issues can take precedence. The requirement to prevent self harm is one such issue where the risk associated with the lever furniture takes precedence over disabled access. Such situations will be covered by the provision of an Access Statement at the planning stage.

54mm minimum

hor

izo n hantal pu dle ll

min .l 600ength mm

Pull handles Recommendations are included concerning the positioning and size of pull handles

400

kin

late

1000mm

kic

1400mm

900 - 1100mm 1000 preferred

• • •

Minimum diameter 19mm Projection from door face 45mm Mounting height for pull handles as shown opposite

Recommendations also include the provision of a horizontal pull handle on doors fitted with a latch to enable wheelchair users to pull the door closed.See diagram opposite. Building Regulations in Scotland & Northern Ireland Technical Handbooks are published to guide specifiers in Scotland and Northern Ireland in much the same way as ADM but are not as detailed, offering little or no guidance in the specification of door hardware although the amended Technical Booklet (Part R) published in Northern Ireland does contain specific information related to handrailing and sanitary fittings. In most cases the Handbooks for Scotland refer specifiers to the guidance contained in BS 8300.

Grab rails Part M3 of Approved Document M of The Building Regulations covers the provision of sanitary facilities. Whilst not specifically part of the Orbis Premier range, we have a full range of grab rails and disabled fittings. Please contact your Laidlaw Technical Consultant for further details.

32 www.laidlaw.net

DDA, APPROVED DOC. M & BS 8300

Approved Document M (ADM) Continued Colour contrast & light reflectance For people with impaired vision the ability to identify key objects in the environment determines their ability to live independantly. It is a requirement of ADM that "all door opening furniture (on manually operated doors) contrasts visually with the surface of the door" (ADM 2.17). "All door furniture should contrast in colour and luminance with the surface of the door ..." (BS 8300 - 6.5.1) The measure of brightness or luminance is measured by the amount of light which objects reflect (Light Reflectance Value - LRV). Whilst people with impaired vision may not be able to easily identify colour they will generally be able to identify some reflected light. The greater the difference in LRV between the door and the hardware, ie the contrast between the two, the easier the hardware will be to locate. On a basic scale of 1 - 100, where a black object which reflects very little light has a LRV of typically less than 10, the recommended contrast is 30 points of difference (although it is recognised that a value of 20 points may be adequate). Metallic finishes The suitability of metallic finishes is a complex issue due to numerous external factors which affect the percieved LRV of metallic substrates. The level and angle of incident light, the colour and nature of the door surface and the surrounding structure of walls, ceiling and floor will all have a bearing on the amount of light which each item of hardware reflects. It is therefore not possible to state which finishes are good and which are not; each must be judged in context to the surrounding environment.

The use of backplates could contribute to increasing the visibility of the operating hardware.

Recent Research The Research Group for Inclusive Environments was commissioned to undertake specific research in this area in association with the GAI (Guild of Architectural Ironmongers). A small (but nonetheless representative) group of visually impaired people tested actual ironmongery samples against various typical door finishes. Results showed that even at LRV differences of 10, over 72% of the test sample were confident of locating the hardware. It is thought that the 3D nature of the hardware, with its highlights and shadows contributes to the ease of location. Also, the nature of the hardware (gloss or matt) appeared to have no significant bearing on how easy it is to detect (see www.gai.org.uk for further information). Measurements Available to specifiers of Laidlaw products is a portable 'Spectrophotometer' which enables LRV readings to be taken of any material, for example door finishes and veneers, to compare with LRV readings of Laidlaw products. Please ask your Laidlaw Technical Consultant for more information. CPD seminars Laidlaw can provide a comprehensive series of RIBA approved CPD seminars including presentations covering DDA and Doc M issues. Subjects covered will include all aspects of colour contrast and demonstrations on the use of the 'Spectrophotometer'.

CPD seminar at our Salford branch showing the use of the Spectrophotometer.

33 www.laidlaw.net

ORBIS PREMIER - INDEX Item No.

Page No.

FPPL3.1 FPPL3.2 FPP1 FPP3 FPP4 FPP5 FPP6 FPP7

6 6 13 13 13 13 13 13

01 903.1 01 903.2 01 903.3 01 913.1 01 913.2 01 913.3 01 923.1 01 923.2 01 923.3 01 933.1 01 933.2 01 933.3 01 904.1 01 905.1 09 903 09 905 09 913 09 915 09 923 09 925 10 961 10 961R 10 961.1 10 961.1R 10 962 10 962R 11 961 11 961R 11 962 11 962R 12 961 12 961R 13 961 13 961R 13 962 13 962R 13 963 13 963R 27 963 27 964 27 965 27 966.30 27 983 27 984 27 985 27 986.30 31 935 31 945 31 947 31 955 31 965 31 967 32 902 37 900.1 37 900.2

23 23 23 23 23 23 23 23 23 23 23 23 23 23 22 22 22 22 22 22 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 20 20 20 20 20 20 20 20 18 18 18 18 18 18 28 24 24

Item No. 37 901.1 37 901.2 50 800.0 50 800.3.7 50 800.4.7 50 800.5.7 50 800.15.7 50 901.72 50 911.72 51 800.0 51 800.3 51 800.4 51 800.5 51 800.15 51 800.25 51 900.0 51 900.3 51 900.4 51 900.5 51 900.15 51 900.25 52 901 52 903 52 905 53 920.18.1 53 920.18.2 53 922.18 53 922.18BB 53 922.18.1 DPS 53 922.18.1 DSP 53 922.18.2 DPS 53 922.18.2 DSP 53 922.24 53 920.24.1 53 920.24.2 53 922.24BB 53 922.24.1 DPS 53 922.24.1 DSP 53 922.24.2 DPS 53 922.24.2 DSP 53 922.30 53 922.30.1 53 922.30.2 53 922.30BB 53 922.30.1 DPS 53 922.30.1 DSP 53 922.30.2 DPS 53 922.30.2 DSP 53 922.45 53 922.45.1 53 922.45.2 53 922.45BB 53 922.45.1 DPS 53 922.45.1 DSP 53 922.45.2 DPS 53 922.45.2 DSP 54 900.13 54 900.13 FRS 54 900.13FRS9 54 901.13 54 901.13FRS 54 901.13FRS9 54 920.13FRS9 54 921.13FRS9

Page No. 24 24 10 10 10 10 10 7 7 10 10 10 10 10 10 7 & 14 7 & 14 7 & 14 7 & 14 7 & 14 7 & 14 11 11 11 12 12 11 11 12 12 12 12 11 12 12 11 12 12 12 12 11 12 12 11 12 12 12 12 11 12 12 11 12 12 12 12 8 8 6 8 8 6 6 6

Item No. 55 901.18 55 901.24 55 901.30 55 901.45 56 901.18 56 901.24 56 901.30 56 901.45 60 001.1 60 001.2 60 001.3 60 001.4 60 001.7 60 011.1 60 012.1 60 013.1 60 014.1 60 014.2 60 030 60 031 60 032 60 033 60 034 60 035 60 036 60 037 60 038 60 039 60 040 60 041 60 042 60 043 60 044 60 045 60 047 60 048 60 051 60 052.1 60 052.2 60 054 60 055 60 056 60 060 60 062 60 063 60 070 60 071 60 072 60 073 60 345.1 60 345.2 60 346.1 60 346.2 60 411.1 60 411.2 60 412.1 60 412.2 60 413.1 60 413.2 60 414.1 60 414.2 60 415.1 60 415.2 60 416.1

Page No. 14 14 14 14 14 14 14 14 25 25 25 25 25 26 26 26 26 26 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 26 26 26 26 26 26 26 26 26 26 26 26 26 27 27 27 27 26 26 26 26 26 26 26 26 26 26 26

Item No. 60 416.2 60 417.1 60 417.2 60 418.1 60 418.2 60 900.1 60 900.2 60 900.3 60 900.4 60 900.5 60 900.6 60 900.7 60 900.8 60 900.9 60 900.10 60 900.11 60 900.12 60 900.13 60 900.14 60 900.15 60 903.1 60 903.2 61 900 89 901

Page No. 26 26 26 26 26 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 28 28 28 28

34 www.laidlaw.net

As the UK's leading specifier and supplier of architectural hardware, timber doorsets and handrail & balustrade solutions, Laidlaw offers its unique service through a national network of 12 sales offices and trade counters.

www.laidlaw.net Barnstaple Unit 1, Branham Crescent Roundswell Business Park (West) Barnstaple, North Devon EX31 3TD T: 01271 311920 F: 01271 311929

Liverpool 3 - 5 Century Building Summers Road Brunswick Business Park Liverpool, Merseyside L3 4BL T: 0151 709 9438 F: 0151 709 9455

Bristol Unit 8, Riverside Business Park St. Annes Road, St. Annes Bristol BS4 4ED T: 0117 300 3980 F: 0117 980 3058

London The Building Centre 26 Store Street London WC1E 7BT T: 0207 436 0779 F: 0207 436 0740

Cardiff Ty Cefnfor, Ocean Park Cardiff CF24 5PE T: 029 2047 1808 F: 029 2049 0250

Perth PO Box 15, Arran Road Perth PH1 3DU T: 01738 620581 F: 01738 633262

Gateshead Unit 1 Halifax Court Halifax Road Dunston, Gateshead Tyne & Wear NE11 9JT T: 0191 461 4100 F: 0191 461 4101

Salford Centurion House Dakota Avenue, Salford Manchester M50 2PU T: 0161 848 0101 F: 0161 872 9313

Glasgow 4 Clifford Court 171 Woodville Street Ibrox Business Park Glasgow G51 2RQ T: 0141 445 8892 F: 0141 445 8871

Sheffield Unit 4 Sheffield Industrial Estate Surbiton Street Sheffield S9 2DN T: 0114 243 8916 F: 0114 242 6591

Kinmel Bay Unit 37 Tir Llwyd Industrial Estate St Asaph Avenue Kinmel Bay, Rhyl North Wales LL18 5JA T: 01745 332151 F: 01745 332493

Willenhall Strawberry Lane Willenhall West Midlands WV13 3RS T: 01902 600400 F: 01902 600490

To email a sales office use the following format: info.office@laidlaw.net e.g. info.bristol@laidlaw.net

Laidlaw subscribes to NBS Plus which contains full specification clauses for all Laidlaw products and is a RIBA approved supplier of CPD seminars.

chi

tectural

Architectural Hardware Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware, including Access Control, to the UK construction industry. As with all its product portfolios, Laidlaw's huge range of architectural hardware, including the renowned Orbis brand, is designed to comply with European building standards. Handrail and Balustrade Solutions Using a modular system in either stainless steel, nylon, timber or a combination of these, Laidlaw's handrail and balustrade solutions are designed to satisfy each client's specifications. Offering the complete technical service, highly trained staff are involved at every stage of each project, from site surveys and design through to supply and installation.

While Laidlaw has taken every care to ensure the accuracy of information, data and advice contained in this literature, no liability in respect of such information whether given negligently or not can be accepted by the company. Due to variations in the printing process, actual colours may differ from those shown. Laidlaw retains the right to amend the technical specification of any range of equipment shown.

adv

RS 10508

Timber Doorsets Saving up to 40% installation time and eliminating co-ordinating problems between doors and ironmongery, Laidlaw has pioneered the Orbis Timber Doorsets solution which is supplied complete with the door, frame, architraves and factory fitted ironmongery to minimise on-site work.

Sales Office Trade Counter Distribution Centre

Laidlaw also subscribes and is an active member of The Guild of Architectural Ironmongers (GAI) which is a recognised body that promotes standards in integrity and excellence in the business of architectural ironmongery.

Each Laidlaw sales office is supported by a centralised distribution centre at Willenhall which has the capacity to pack and despatch individual items or by doorset.

i membe

ÂŠ Laidlaw Solutions Limited November 2007/L109/001