ROPE HOIST
Demag supplies rope hoists and V-type girders to motorsports giant in Germany
When Bischoff + Scheck AG based in Rheinmünster, Germany invested in a new assembly facility that required expanded manufacturing capacity for its production operations they needed a lightweight crane system that would not damage their newly installed roof which had solar panels installed. Demag, a globally recognised supplier of crane equipment that meets all forms of stringent manufacturing requirements suggested their DMR rope hoists and double-girder overhead travelling crane with V-type girders.
with a load capacity of 6.3 tons that can work individually or in tandem. Both crabs travel on a double-girder overhead travelling crane, with V-type girders, that can transport the truck bodywork components across a span of 28.7 meters”.
“Due to the solar panel installation, the additional weight of these panels meant that the roof structure had a reduced load capacity. The facility needed a crane model that was as lightweight as possible and that would not overload the building structure” said Emil Berning Managing Director of Demag in South Africa.
“The corresponding cranes are used to lift the large and heavy truck bodies onto the chassis and install them. This requires a high level of precision that the Demag solution met perfectly” added Berning.
“Demag believed that the most efficient method for the safe handling and dedicated positioning of large and heavy loads was to operate cranes in tandem and recommended two DMR rope hoists
The roof structure’s reduced load capacity has been accommodated by reducing the load-bearing capacity of the crabs in tandem crane operation to 5 tonnes each in the outdoor area of the bay. If necessary, crane operators can use their radio control system to switch between individual and tandem modes safely and easily.
Special features The V-type girder design with diaphragm joints reduces the equipment’s weight. This has a positive effect and makes it possible to use the crane’s load capacity while adhering to the restrictions posed by the building’s structure. The smart SafeControl system continuously monitors the crane data and ensures that the equipment will be shut down if any irregularities occur, also concerning the starting conditions in the outdoor area of the bay. Crane operators can lower the load or move it back to the area that has no load reduction. Load summation protects against crane bridge overloading. Besides, SafeControl can prevent accidental collisions between the two crabs with optical distancing.