Lighting set

2013

LIGHTING SET

MODULAR ADVANCED

FOR PLANE AND HELICOPTER AIRFIELDS AND DROP ZONES

Fire / Emergency services Industry / construction / OH&S

Oil / fuel industry Railroad / port

Trucking / Transport Automotive Aviation Military Marine Agriculture Recreation

ERGONOMICS Simplicity is the key to success. Flare’s specially designed shape makes it very handy and allows for a very quick installation of dedicated accessories. Easily attaches to belts, clothing, vehicles, cones and bollards. The compact beacons are perfectly portable, can be transported one by one or in sets, in customized boxes or virtually indestructible hard cases. The beacons can be operated separately or linked into networks. Customers can order a set of beacons powered by rechargeable batteries..

MODULARITY With Flare products, customers can enjoy many new ways of use of these ingenious products. We keep developing the beacon system and the huge amount of accessories makes it easy to combine modules into new kits. Every customer is approached individually and provided with professional support when customizing a Flare kit.

INTENSIVE LIGHT Visibility over 4km (Air), IR version 1km visible (with night goggles). Flares are available in a variety of one or two colour light combinations, steady-on or flashing, and in 3 light intensities.

SAFETY The safety issues concern the technology of manufacture of products (such as power sources, materials, etc.) which comply with current regulations on environmental protection and user safety.

The kind of light and its visibility facilitates the completion of planned activities (especially in emergency situation), and sometimes even makes it possible at all.

EXPERIENCE Flare systems are successfully used domestically and abroad, by civil and emergency services, the military and the so-called uniformed services. We focus on light systems and technologies, have excellent technical facilities and boast 20 years of experience.

Dear Customer, you have just found the best professionals in the market.

MAIN BENEFITS - Energy efficient light source - LEDs; - Lightweight and compact; - Flash and steady light operating modes; - Visible and IR light operating modes; - Variety of colors and modes; - can be powered from batteries, rechargeable batteries or mains, with 12V, 24V or 48V; - Code radio frequency controlled (optionally); - Low battery level indicator; - operating temperature range from -40°C to +50°C; - The beacons are also available with ATEX approval (for operation in explosion risk zones);

3 2 1

00 0

10

0

Metres (High)

20

10

20

30

40

20

10

Peak part of beam 5˚ width (9m high at 100m distance)

0 0

10

20

30

40

50 Metres (Distance)

[2]

60

70

80

90

100

BE SAFE BE SEEN IN EVERY SITUATION!

The variety of hazards and emergencies listed below are only a small number of situations when Flare could be easily deployed to provide protection when you need it most. The possible applications are only limited by your imagination:

Fire / Emergency service

- Personal visual protection - Location alert - Traffic management - Accident or hazardous scene alert - Helicopter landing zone demarcation

Industry / construction / OH&S

- Forklift area demarcation - Unusual hazards - Obstacle identification - Roadside skip alert - Cleaning, maintenance

Oil / fuel industry

- Hazardous area demarcation - Hazardous area demarcation in explosion zones - Directional markers - Maintenance - Directional markers

Railroad / port

- Overhead crane alert - Crane boom night light - Hazardous area demarcation - Maintenance

Trucking / Transport

- Breakdown - Accident - Location alert - Vehicle loading and unloading

Automotive

- Breakdown - Accident - Location alert

Aviation

- Emergency landing strip - Directional markers - Location alert

Military

- Landing zone demarcation - Location alert - Transport applications - Emergency services - Infrared applications

Marine

- Breakdown - Man overboard - Accident - Location alert

Agriculture

- Livestock crossings - Night harvesting - Vehicle loading and unloading - Location alert

Recreation

- Location alert

[3]

DESIGNED AND MANUFACTURED TO PROVIDE SAFETY AND VISIBILITY IN A QUICK AND EASY WAY! High-luminosity solid state LEDs rated for greater than 100,000 hour operating life.

Patented Fresnel lens to maximize beam conspicuity.

Low battery indicator to show when the batteries need to be Shatterproof polycarbonate lens to ensure maximum clarity,

replaced (not included in 400 series).

strength, durability and shock resistance.

Failsafe positive activation micro switch to prevent accidental

Coloured pins indicate the beacon light colours.

turning off or on of beacon.

Reflective strip and fluorescent body to maximize visibility, day and night.

Advanced battery protection system to protect circuits and batteries from shock if the beacon is dropped.

Width in widest place 6 cm.

High strength clips to permit attachment of beacon to cones, signs, belts or vehicle windows.

Most models have an operating life of more than 40 hours for each set of batteries.

Precision o-rings to ensure beacon is waterproof, dustproof and safe to operate in hazardous areas.

Total height 20 cm.

Impact resistant ABS body and cap to maximize toughness and durability of beacon.

Beacon approved for operation on explosion hazard atmosphere.

Szerokość w najszerszym miejscu 6 cm.

Total height 20 cm.

Ex level (approved protection level): Ex ic IIC T4 Gc IP66

Weight: 439 g with batteries, 173 g w/o batteries.

Certificate no.: ITS10ATEX27129

Model

Operating mode

Light intensity

HZ 510

EF 512

HZ 530

EF 532

HZ 520

EF 522

EF 550

IR 510

IR 520

EF 400

FLASHING single colour

FLASHING single colour

FLASHING dual colour alternating

FLASHING dual colour alternating

STEADY single colour

STEADY single colour

STEADY dual colour directional

STEADY single colour

STEADY single colour

FLASHING coloured

ULTRA BRIGHT

SUPER BRIGHT

ULTRA BRIGHT

SUPER BRIGHT

ULTRA BRIGHT

SUPER BRIGHT

SUPER BRIGHT

ULTRA BRIGHT

ULTRA BRIGHT

IR

STANDARD

IR

Light colours

4 LED

[4]

8 LED

16 LED

RED

AMBER

GREEN

BLUE

WHITE

IR

APPLICATION

EF 350

HZ 510

EF 512

HZ 520

EF 521

EF 522

HZ 530

EF 532

EF 550

LS 510

TF 510

TF 610

IR 510

IR 520

EF 350

HZ 510

EF 512

HZ 520

EF 521

EF 522

HZ 530

EF 532

EF 550

LS 510

TF 510

TF 610

IR 510

IR 520

Transport Automotive Recreation Industry Fire / Emergency Marine Aviation Military Mining FEATURES

Single colour flashing Single colour steady Dual colour flashing Dual colour steady Low battery indicator Torch function Ex optional

PERFORMANCE

EF 350

HZ 510

EF 512

HZ 520

EF 521

EF 522

HZ 530

EF 532

EF 550

LS 510

TF 510

TF 610

IR 510

IR 520

Light power (candela)

20

12-30

40

4-13

9-13

5-17

8-24

10-34

10-20

30

30-200

25-200

0.13 w/s0.04-

0.06 w/s0.15-

Battery life (hrs)

30

40

25

40

40

25

40

25

25

40

40

40

40

40

Battery durability (hrs)

30

40

25

40

40

25

40

25

25

40

40

40

40

40

FLARE BEACONS

ACCESSORIES

POWER SUPPLY CONTROL

MOUNTS

ADVANCED SIGNAL LIGHTING SYSTEM Magnetic clip

Suction clip

Floatation collar

Magnetic base mount

Standard rubber base mount

Rubber aviation base mount

Rubber aviation base mount up to 2 kg load

Steel aviation base mount with adjustable height

Hard case for 5 beacons + base mounts

Hard case for 10 beacons + base mounts

Small PELI transport case

Medium PELI transport case with wheels

Large PELI transport case with wheels

R20 batteries

R20 rechargeable batteries

Individual Flare beacon converters DC / DC

Remote radio control

Control base unit

RUS flare

Telescopic pole

Anchors

Directional cover

Power cables

AC/DC power supply unit

MISCELLANEOUS

HARDCASES

CONTROL

BASEMOUNTS

Cone mount clip

Other accessories per customer request

[5]

BEACONS

FLARE

GENERAL CHARACTERISTICS

Depending on configuration, over 300 components may make up a set of beacons for securing drop zones, landing zones or airfield strips. The following may be considered main components of a set: 1. Light components 1.1 Flare / E-Flare beacons; 1.2 Mobile, battery-powered light systems - floodlights; 2. Control elements for a group of beacons or the whole set of beacons (all groups); 2.1 Wired control base unit; 2.2 Radio control base unit; 3. Power supply components: 3.1 Individual battery packs; 3.2 AC power supply units for battery packs; 3.3 Remote control;

The entire set, including beacons and control base unit, are powered by commonly available R20 rechargeable batteries.

Depending on the variant, these may be ordinary rechargeable batteries that require to be recharged at least once in 3 months (to keep them fully operational) or long-term storage batteries, for which manufacturers guarantee at least 75% charge level after 1 year of storage. Still, such batteries need to be recharged at least once in 6 months to ensure the beacon’s operating time in extreme temperature conditions is kept at proper level.

It is also important to remember to observe proper polarity when installing such rechargeable batteries. For beacons, the positive (+) pole is inside and in control base units the negative (-) pole is inside (this is due to the design of power supply packs in control base units).

The entire set may be controlled in three ways:

4. Installation elements for beacons: 4.1 Aviation base mounts for placing beacons in any position; 4.2 Aviation base mounts with ballast; 4.3 Steel aviation base mounts with adjustable height; 4.4 Modular poles with adjustable height; 4.5 Ground anchors for base mounts; 5. Elements for transportation of sets of beacons: 5.1 Landing hard carry bags for individual components of the set: 5.2 Transport cases;

[6]

1. Manual mode, where each beacon is switched on/off individually; 2. Combined mode, where individual beacons or groups of beacons may be controlled synchronously with a wired or radio remote control; 3. Remote control mode, where each beacon or group of beacons is switched on/off with its own control base unit, which is, in turn, controlled with the central control panel / remote control of the entire group.

There are two different kinds of Flares. They are easily distinguished with external housing and its colour. Another characteristic feature is the method of switching the beacon on and its operation mode.

Switching the power on: - EF/HZ (E-Flare) Turn the beacon’s head until perceptible resistance is felt to switch the beacon on. The turn distance is regulated with guiding channels where pins that determine the beacon’s colour are located. The beacon is immediately switched on. IR versions emit 3 short beeps to signal the start of operation.

- F12 Press the button in the housing once to switch it on in first operation mode.

Typ - EF/HZ

Typ - F12

[7]

BEACONS

FLARE

FLARE SELECTED APPLICATIONS

ADVANCED SIGNAL LIGHTING SYSTEM LIGHTING FOR AIRSTRIPS - Example of application of Flare beacons

1500m

15m min.

COMMENTS: Steady white light - line along landing strip.

1. White light positioned along the edge of the landing strip, every 30 m.

2. Green and red directional light, approach direction.

Steady red light - end of landing strip.

Steady green light - beginning of landing strip.

LIGHTING FOR MILITARY HELICOPTERS LANDING ZONES - Example of application of Flare beacons

14m

7m

7m

7m

White light - code letter outline, character Y.

[8]

LIGHTING FOR AIR AMBULANCE MEDICOPTER LANDING ZONES - Example of application of Flare beacons

Steady white light - outside edges of landing strip.

Steady red light - approach direction.

LIGHTING FOR DROP ZONES - Example of application of Flare beacons

DROP ZONE

0,5B DROP ZONE EDGE

ADDITIONAL MARKING 20M

CHARACTER CODE DROP ZONE CENTER

COUNTING LIGHT (ADDITIONAL MARKING)

COMMENTS: Steady white light.

Flashing amber light.

Flashing blue light.

Flashing green light.

1. Minimal size of code character: 10 m x 10 m.

2. Applicable code characters: A, C, J, R or S. 3. Minimal number of light points (white colour) in a code character - 10.

4. B = 300 m (100 m for combat drops).

5. Temporary drop prohibition: two parallel lines at the bottom of the character code (15 m x 15 m).

6. Drop prohibition at all times: character X (15 m x 15 m) or red light under the code character.

7. Arrow length: 15 m.

[9]

3F-FLARE SIGNALING - EMERGENCY BEACON 3F-FLARE is a signaling and emergency beacon. It may be used for warning and designating hazardous areas (emergency forces, uniform services, drivers, etc.). It may also be successfully applied to designate helicopter landing sites or signaling vehicle breakdowns.

Depending on the operation mode, beacons can be divided into two types: - INDIVIDUAL MODE beacons (IM). The LED module allows three illumination modes. The beacon is controlled with abutton placed on the housing’s side. The user may choose from three modes: quick flash, standard flash and steady light.

Diameter 5.5 cm.

Height 23.5 cm

- GROUP MODE beacons (GM). An extended IM beacon. The beacon may operate independently or in a group of beacons, synchronized with signal transmitted by wire (KUS) or by radio (RUS). Depending on the used light module, the beacon operates in only one colour, or in extended mode, where one of several colours and light types can be used: 1. IR invisible light; 2. RGB; 3. Amber; 4. White;

3F-FLARE image in 1:1

[10]

3F-FLARE STANDARD

3F-FLARE RUS TYPE 1

HEIGHT

235 mm

DIAMETER

55 mm

WEIGHT

Up to 0.5 kg with power source. The weight may differ depending on the applied batteries.

2 x R20 Alkaline / rechargeable battery min. 5 Ah

POWER SUPPLY STORAGE STORAGE OF READY TO USE BEACONS

3F-FLARE RUS TYPE 2

With uninstalled power source. Rechargeable b atteries must be recharged every 1-3 months.

Beacons in transport hard cases, with installed power sources (new or freshly recharged batteries).

STORAGE OF BEACONS FOR LONG PERIODS WITHOUT USE

Beacons in transport hard cases, with uninstalled power sources.

- Batteries: to be controlled before use - Rechargeable batteries: if a beacon is not used and its rechargeable batteries are not recharged, it is recommended to fully charge them at least once in 3 months.

OPERATING TIME

Depends on the power source, operating mode and ambient temperature. For example, for 5 Ah rechargeable battery operating in + 15/20째C the STEADY LIGHT mode is up to 10 h / the FLASHING LIGHT mode is up to 20 h continuous work.

CHARGE STATUS INDICATOR

Yes

OPERATING RANGE / TEMPERATURE OPERATING MODES

- 30째C / + 40째C 3

2

2

STEADY LIGHT

Yes

Yes

Yes

FLASHING LIGHT SEQUENCE 1

Yes

Yes

Yes

FLASHING LIGHT SEQUENCE 2

Yes

No

No

1

1

5

Yes

Yes

Yes

LIGHT OPERATING COLOUR

COLOUR TYPE

IR VERSION HOUSING MATERIAL

ABS

HOUSING COLOUR

YELLOW

MANUAL START / CONTROL REMOTE START / CONTROL

Yes No

STAND-ALONE GROUP OPERATION

Yes

Yes

Yes No

Yes

Tak

[11]

BEACONS

FLARE

GROUP CONTROL

Thanks to group control, the user can synchronously switch on / off all beacons within a specific group. Depending on the type of beacons it is also possible to select the operating mode (steady / flashing) and light colour (RBG + WHITE + AMBER + IR). Manual or remote control is

possible at every level. Consequently, situations like damage, loss or discharge of the remote control - which makes it impossible to switch on a group of beacons - can be avoided. See the diagram below for better understanding of the control structure.

Remote control

G1

G2

G3

G4

G5 Control base unit

RUS flare

...

...

...

The user may switch on individual groups of beacons or the entire set. Before starting operation, mode of operation and light colour (if the beacons have such functions) can be selected for each group of beacons.

The number of Flare beacons is unlimited for any group, and a group can be composed of just 1 beacon, too. This only depends on the range of operation of a given control base unit and the layout of beacons assigned to such a control base unit. Beacons can be freely moved be-

...

...

tween groups (a beacon must be then logged in the new control base unit). Control base unit operates on various frequency bands, which means beacons can be placed close to each other or even mixed.

A beacon assigned to a given control base unit will only react to signal from this particular control base unit. A control base unit receives commands from the user, via a remote control or a control panel on the control base unit housing. Such control protocol translates into versatility of a set of beacons in their use for military, emergency or other purposes. See a modified Drop Zone diagram below.

LIGHTING FOR DROP ZONES - Example of application of Flare beacons

DROP ZONE

0,5B

G3

DROP ZONE EDGE G5

G2

ADDITIONAL MARKING

20M

G4

G1

DROP ZONE CENTER

CHARACTER CODE COUNTING LIGHT (ADDITIONAL MARKING)

[12]

BEACONS

FLARE

SELECTED EFLARE ACCESSORIES

Flare beacon, RUS

3F-FLARE RUS Flare beacon is adapted for operation in a group of beacons. It features a specially adapted electronic circuit with a module for receiving radio signal from the control base unit. The beacon can operate independently (IM) and in group mode (GM).

Control base unit, RUS

The RUS control base unit synchronizes the operation of all beacons in a group, assigned to a particular control base unit. The control base unit can be controlled manually, via a special control panel, or with a radio remote control.

Ex ATEX eFlare beacon

A version of eFlare beacon designed for operation in explosion hazard areas. This is of crucial importance when securing an area, conducting typical engineering activities or when specialized fire & emergency services are at work. Red beacons placed at the edges of a zone determine its range. The exit from a hazard zone may be marked with a line of beacons placed on rubber base mounts, where the middle part of the line comprises beacons with steady amber light, the starting point in the zone is designated with red flashing light and the end point, the so-called Safety Zone, is made with flashing green light.

Steel aviation base mount - adjustable height

For securing landing zones for combat helicopters or Air Ambulance medicopters, landing strips for large cargo planes or light civilian aircraft. The adjustable height beacons may be used in various terrain types, such as snow, tall grass or uneven land. The low center of gravity and rod supports make it impervious to gusts of wind. This is especially important in terms of safety, e.g. when securing landing zones for large helicopters. The standard version of base mounts is anodized in black.

Any color may be applied to the base mount, or it can be coated with special reflective tape for better visibility for field personnel (optionally). A matter of key importance when securing a landing zone during exercises or when aircraft crew with night goggles approach the airstrip. The base mount is of simple design and boasts excellent resistance to elements. One beacon can be installed normally, or two, with an adapter. The base mount can also be anchored to the ground with pins.

Rubber aviation base mount

The most popular choice for securing airstrips or drop zones. The base mount can be secured in any position thanks to the beacon’s catches. The lightweight device is portable. This is especially appreciated by user who carries around a lot of personal equipment (servicemen, soldiers).

Hard case for 10 beacons + base mounts

A hard case for 10 Flare beacons and 10 rubber aviation base mounts. The hard case can be used for parachuting. The beacons are placed in the hard case so that they are additionally protected from the top and bottom by the rubber base mounts.

Customers may also request other models of hard cases, for more beacons and ones that can be transported on back. The hard case is made of green Cordura that does not react to IR, and the top cover is closed with a hefty YKK zip (other camo patterns are also available).

[13]

E-FLARE

ATEX

SAFETY IN EXPLOSION HAZARD ATMOSPHERE

E-Flare beacons are certified for use in explosion hazard zones. The certification applies to all E-Flare 500 and E-Flare 350 Red and Amber beacons (series 300 is obsolete). „Ex” stands for approval for use pursuant to „explosion proof proEx level (approved protection level): tection” standards.

Ex ic IIC T4 Gc IP66 Certificate no.: „ic” is very close in its meaning to the previously explained symITS10ATEX27129 bol „3”. Equipment also for use in areas where explosion risk is not present. „IIC” designates equipment for use in places other than mines, i.e. in industrial facilities placed overground (with explosive gas atmosphere). The gas may be a mixture of nitrogen and air; this category is marked „C”. „T4” means that the maximal temperature of the surface of the part of or the entire device does not exceed 135°C when the ambient temperature is 40°C. „Gc” means operation protection in gas atmosphere and level of protection of the device itself, when it operates normally without any defects.

The approval for operation in explosion hazard zones is only valid if beacons are powered with the following kinds of batteries: Energizer Industrial E91 (AA Cell) Energizer Industrial MN1300 (D Cell) Explanation of symbols:

Duracell Procell PC1500 (AA Cell) Duracell Procell PC1300 (D Cell)

II 3 G Coding pursuant to ATEX Directive no. 94/9/EC The special Ex symbol designates protection in „Explosive Atmosphere” or „Explosion Hazard Zones”. „3” Means category 3 equipment for use in zone 2. The equipment, given its operating parameters specified by the manufacturer, is designed for operation in areas where explosion risk occurs due to presence of mixture of air and gases, vapors, mists or gas and dust mixtures. The explosion risk is improbable, but if it takes place, this happens infrequently and for a short period of time. A good example are areas where vehicles are refueled. „G” means gas (namely, a mixture of air with gases, vapors or mists). If used, „D” means dust (namely, gas and dust mixtures). „Ex ic IIC T4 Gc” is the coding method used after the Directive 94/9/WE came into life. Before, ATEX coding would not provide complete information about certifications. This marking is used additionally and ensures better understanding of the device’s parameters and consequently helps avoid misunderstandings.

[14]

Varta MN1500 (AA Cell) Varta MN1300 (D Cell)

SIGNALING DISCS M-FLARE EXTENSION OF BEACON RANGE THE M-FLARE is safer and more eco-friendly than a standard beacon. M-Flare is a source of emergency light that produces no sparks or open flame, does not generate harmful gases, fumes or toxic substances. M-Flare’s durable, rubber housing makes it perfect for use in traffic environment. M-Flares can be placed on the ground, attached

BATTERY VERSIONS DIMENSIONS

RECHARGEABLE BATTERY VERSION

11.2 cm X 3.5 cm (in widest place)

WEIGHT

~195 g

POWER SUPPLY STORAGE RECHARGING

Batery CR 123 3V

Rechargeable battery Li-ion 3.7V 700 mAh

10 years

recharge once in 3 months

- NA -

12V DC / 230V AC

OPERATING TEMPERATURE

- 40°C / 110°C

LIGHT EMISSION

360° or directional light MODE

LIGHT MODES

OPERATION

VISIBILITY

LIGHT TYPE

LIGHT OPERATION

I

ROTATION LIGHT

FLASHING

2 LED

II

360° LIGHT - 3 IMPULSES

FLASHING

100%

III

360° LIGHT - 1 IMPULSES

FLASHING

100%

IV

ROTATION LIGHT

ALTERNATING

100%

V

360° LIGHT

S-O-S

100%

VI

360° LIGHT

STEADY

100%

VII

360° LIGHT

STEADY

50%

VIII

DIRECTIONAL LIGHT

STEADY

2 LED

IX

DIRECTIONAL LIGHT

STEADY

4 LED

POWER

X

Signaling disk switched off

ON

Switching on and changing mode by pressing the ON/OFF button.

Switching the disk off, without saving the mode, by selecting the X MODE (all modes in a loop).

OFF

NIGHT DAY

LIGHT COLOR

with adapters to post or cones, or to metal items, with a magnet. The beacons are water proof and floatable. With IP68 protection class the beacon can be immersed up to 10 m. The M-Flare can be charged with a car 12V DC charger, a standard mains 230V AC charger, either one by one or in a group or charged with CR123 battery.

L-DS-WHITE-AKU, L-DS-AMBER-AKU

Switching the disk off, with saving the mode, by pressing and holding the ON/OFF button for 3 sec.

Switching the disk off is signaled with 5 flashes of IX MODE. Up to 900 m (road, water) Up to 16 km (from air) Up to 300 m

The colour of the housing denotes the light colour: WHITE, YELLOW, AMBER, BLUE, RED, GREEN.

MATERIAL

Dyed polymer

FEATURES

Strong fixing magnet, hanging adapter, anchoring eyes, polarity marked in pins, signaling and quick start functions, shock resistant.

OPERATING TIME

L-DS-WHITE-AKU, L-DS-AMBER-AKU

Up to 60h

ACCESSORIES SELECTED AVAILABLE COLOURS

L-DS-PACK-AMBER-AKU

[15]

Dear Customer!

Remember!

When you buy counterfeit products, you not only risk lower quality, but also the loss of such product. (The Law dated June 30th, 2000 on industrial ownership law, Journal of Laws, 01.49.508 dated May 21st, 2001, Item 305). Disposal pursuant to WEEE Directive. For more information on the disposal of electrical appliances see our website at www.mactronic.com.pl

Visit our website to see more products:

www.mactronic.pl

www.tacticalpro.pl

Flare beacon sets have been approved by emergency services as signaling beacons for securing medicopter landing sites and other areas where proper emergency lighting is required. Additionally, such beacons are used by the Air Ambulance Service for training medical rescue workers and fire fighters. Our beacons are successfully used by airborne, military and air forces for securing airstrips and drop zones.

10 years of service from the date of purchase.

ROHS Ministry of Interior and Administration of the Republic of Poland Concession no. B-409/2003

ISO 9001-2008

CONTACT

MacTronic ul. Metalowców 25 a 54-156 Wrocław 0048 71 351 86 53, 0048 71 351 14 37 0048 71 358 44 42 mactronic@mactronic.pl

DISTRIBUTOR

[16]

Trade Department / Institutions Tactical Department / Arms accessories 0048 71 351 86 53 wew. 31 0048 661 990 207 tactical@mactronic.pl Institutional Department / Fire Brigade, Emergency Services 0048 71 351 86 53 ext. 31 0048 519 309 791 streamlight@mactronic.pl Trade Department / Export (Polish, English, German, Italian) 0048 71 351 86 53 ext. 13 0048 661 960 422 export_manager@mactronic.pl