Volute

1.0 Presentazione Volute2011

8-04-2011

17:57

Pagina 1

1

Volute

1

Scrolls

1.1

Volute rifinite a freddo

1.1

Cold finished scrolls

1.2

Elementi decorativi

1.2

Decorative elements

1.3

Volute forgiate

1.3

Hand forged scrolls

1.5

Volute rifinite a caldo

1.5

Hot finished scrolls

1.6

Volute rifinite a spina di pesce

1.6

“Fish- tail” finished scrolls

1.7

Volute rifinite con pallina

1.7

Scrolls with hot finished ball

1.8

Volute con finitura “barocco”

1.8

“Baroque styled“ scrolls

1.9

Volute con finitura a nocciolo

1.9

Round ended scrolls

1.9

Volute con finitura a foglioline

1.9

Scrolls with leaves

1.10

Volute con foglie

1.10

Scrolls with forged leaves

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

1

1

1.0 Presentazione Volute2011

18-04-2011

11:54

Pagina 2

Battitura righe Grooves hammering Ripristino allineamento Alignment restoring Controllo allineamento Alignment checking Controllo misura Size checking

RIFINITO A FREDDO - c o l d f i n i s h kalt fein bearbeitet - Acabado en frio - Finition a froid Particolare del pezzo, piegato schiacciato ma non riscaldato.

Detail of the part which is bent, worked, crushed and trimmed without being heated.

Detail des Werkstücks das gebogen, bearbeitet, gepresst, entgratet wird ohne je aufgeheitzt zu werden.

Particolar de la pieza que es doblado, elaborado, aplastado y rebarbado sin ser calentado.

Détail de la pièce qui est pliée, travaillée, aplatie, ébavurée sans être chauffée.

RIFINITO A CALDO - h o t f i n i s h Heiss fein bearbeitet - Acabado en caliente - Finition a chaud Rifinitura di un particolare del pezzo che viene riscaldato, pressato con cura ed attenzione.

Finishing up of a detail of the part which is heated and then pressed or hammered with special care and attention. Feinarbeit eines Details das erhitzt und dann aufmerksam gerpresst oder geschmiedet wird.

Acabado de un particolar de la pieza que es calentado y luego prensado o batido cuidadosamente.

Finition d’un détail de la pièce qui est chauffé et puis pressé ou forgé avec soin et attention.

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

1.0 Presentazione Volute2011

8-04-2011

VOLUTE scrolls

17:57

Pagina 3

1

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright Š 2011

1.0 Presentazione Volute2011

1.1

4

8-04-2011 17:57 Pagina 4

1.1 Interno Volute2011

8-04-2011

17:58

Pagina 5

Volute rifinite a freddo Cold finished scrolls Martellato Hammered

1.1

Rifinito a caldo Hot finished

Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 60 x 115 h 2-3/8”x 4-1/2” h 5/8”x1/8” ■ 16 x 4 1015 3/4”x1/4” ■ 20 x 6 1016 1/2”x1/4” ■ 12 x 6 1017 5/16”x5/16” ■ 8x8 1018

mm 45 1-3/4” mm 41 1-5/8” mm 45 1-3/4”

mm 75 x 125 h 3”x 5” h ■ 8 x 8 5/16”x5/16” 1014

mm 60 x 115 h 2-3/8”x 4-1/2” h 5/8”x1/8” ■ 16 x 4 1015-067R 3/4”x1/4” ■ 20 x 6 1015-073R 1/2”x1/4” ■ 12 x 6 1015-063R 5/16” ■ 8x8 1015-023R

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 75x 125 h 3”x 5” h 1/2”x1/4” ■ 12 x 6 1014-063

mm 45 1-3/4”

mm 60 x 100 h 2-3/8”x 4” h mm 75 x 125 h 3”x 5” h ■ 12x6 1/2”x1/4” 1010 ■ 8 x 8 5/16”x5/16” 1009-063R ■ 14x5 9/16”x3/16” 1011 ■ 8 x 8 5/16”x5/16” 1009-064R ■ 10 x 5 3/8”x3/16” 1012 ■ 12 x 6 1/2”x1/4” 1012-063 ■ 20 x 4 1/4”x1/8” 1013 ■ 12 x 6 1/2”x1/4” 1012-063R

mm 41 1-5/8”

mm 60 x 100 h 2-3/8”x 4” h 1/2”x1/4” ■ 12 x 6 1009 ■ 14 x 5 9/16”x3/16” 1019

mm 70 x 140 h 2-3/4”x 5-1/2” h 1005-067R ■ 16 x 4 5/8x1/8” 1005-073R ■ 20 x 6 3/4x1/4” 1005-063R ■ 12 x 6 1/2x1/4” ■ 8 x 8 5/16x5/16” 1005-023R

mm 48 1-7/8”

mm 45 1-3/4”

mm 80 x 180 h 3-1/8”x 7” h mm 70 x 140 h 2-3/4”x 5-1/2” h 5/8”x1/8” ■ 16 x 4 5/8”x1/8” 1005 ■ 16 x 4 1001-067R 3/4”x1/4” ■ 20 x 6 3/4”x1/4” 1006 ■ 20 x 6 1001-073R 1/2”x1/4” ■ 12 x 6 1/2”x1/4” 1007 ■ 12 x 6 1001-063R 5/16” 1008 ■ 8x8 ■ 8 x 8 5/16”x5/16” 1001-023R

mm 45 1-3/4”

mm 80 x 180 h 3-1/8”x 7” h 5/8”x1/8” ■ 16 x 4 1001 3/4”x1/4” ■ 20 x 6 1002 1/2”x1/4” ■ 12 x 6 1003 ■ 8 x 8 5/16”x5/16” 1004

mm 45 1-3/4”

mm 75 3”

mm 75 3”

1.1

5

1.1 Interno Volute2011

8-04-2011

17:58

Pagina 6

Volute rifinite a freddo Cold finished scrolls Ferro pieno quadro ■ Square iron

1.1

Ferro pieno piatto ■ Flat iron

Ferro pieno tondo ● Round iron

mm 47 1-7/8”

mm 90 3-1/2”

mm 50 2”

1.1

mm 80 x 220 h 3-1/8”x 8-5/8” h 5/8”x1/8” ■ 16 x 4 1020 ■ 8 x 8 5/16”x5/16” 1021

mm 120 x 305 h - 4-3/4”x 12” h 5/8”x1/8” ■ 16 x 4 1025 ■ 8 x 8 5/16”x5/16” 1026

mm 65 2-9/6”

6

mm 120 x 220 h 4-3/4”x 8-5/8” h 5/8”x1/8” ■ 16 x 4 1030 3/4”x1/4” ■ 20 x 6 1031 1/2”x1/4” ■ 12 x 6 1032 ■ 8 x 8 5/16”x5/16” 1033

mm 85 3-3/8”

mm 85 3-3/8”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 50 2”

mm 50 2”

mm 65 2-9/6”

mm 120 x 220 h 4-3/4”x 8-5/8” h 5/8”x1/8” ■ 16 x 4 1030-067R 3/4”x1/4” ■ 20 x 6 1030-073R 1/2”x1/4” ■ 12 x 6 1030-063R ■ 8 x 8 5/16”x5/16” 1030-023R

1.1 Interno Volute2011

8-04-2011

17:58

Pagina 7

Volute rifinite a freddo Cold finished scrolls

1.1

Rifinito a caldo Hot finished

Martellato Hammered

Forgiato a mano Hand forged

Particolare finitura Finish detail

1.1 mm 70 2-3/4”

mm 95 3-3/4”

mm 95 3-3/4”

mm 60 2-3/8”

mm 60 2-3/8”

mm 70 2-3/4”

mm 120 x 290 h 4-3/4”x 11-3/8” h 5/8”x1/8” ■ 16 x 4 1035 3/4”x1/4” ■ 20 x 6 1036 1/2”x1/4” ■ 12 x 6 1037 ■ 8 x 8 5/16”x5/16” 1038

mm 120 x 290 h 4-3/4”x 11-3/8” h 5/8”x1/8” ■ 16 x 4 1035-067R 3/4”x1/4” ■ 20 x 6 1035-073R 1/2”x1/4” ■ 12 x 6 1035-063R ■ 8 x 8 5/16”x5/16” 1035-023R mm 75 3”

mm 125 x 360 h 5”x 14-1/8” h 5/8”x1/8” ■ 16 x 4 1040 3/4”x1/4” ■ 20 x 6 1041 1/2”x1/4” ■ 12 x 6 1042 ■ 8 x 8 5/16”x5/16” 1043

mm 65 2-9/16”

mm 125 x 360 h 5”x 14-1/8” h 5/8”x1/8” ■ 16 x 4 1040-067R 3/4 x1/4” ■ 20 x 6 1040-073R 1/2”x1/4” ■ 12 x 6 1040-063R ■ 8 x 8 5/16”x5/16” 1040-023R

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 100 4”

mm 100 4”

mm 65 2-9/16”

mm 75 3”

7

1.1 Interno Volute2011

8-04-2011

17:58

Pagina 8

Volute rifinite a freddo Cold finished scrolls Ferro pieno quadro ■ Square iron

1.1

Ferro pieno piatto ■ Flat iron

Ferro pieno tondo ● Round iron

mm 87 3-7/16”

mm 108 4-1/4”

mm 360 14-1/8”

mm 50 2”

mm 150 6”

mm 108 4-1/4”

1.1

mm 140 x 720 h 5-1/2”x 28-3/8” h 3/4”x1/4” ■ 20 x 6 1050 ■ 10 x 10 3/8”x3/8” 1051

mm 75 x 720 h 3”x 28-3/8” h 5/8”x1/8” ■ 16 x 4 1055 3/4”x1/4” ■ 20 x 6 1056

8

mm 75 x 720 h 3”x 28-3/8” h 5/8”x1/8” ■ 16 x 4 1060 3/4”x1/4” ■ 20 x 6 1061

mm 150 x 900 h 5-7/8”x 35-1/2” h 5/8”x1/8” ■ 16 x 4 1065 3/4”x1/4” ■ 20 x 6 1066

mm 100 4”

mm 140 5-1/2”

mm 360 14-1/8”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 60 2-3/8”

mm 100 x 350 h 4”x 13-3/4” h 3/8”x3/16” ■ 10 x 5 1045 1/2”x1/4” ■ 12 x 6 1046

mm 125 x 720 h 5”x 28-3/8” h 5/8”x1/8” ■ 16 x 4 1070 3/4”x1/4” ■ 20 x 6 1071

1.1 Interno Volute2011

8-04-2011

17:58

Pagina 9

Volute rifinite a freddo Cold finished scrolls Martellato Hammered

Rifinito a caldo Hot finished

1.1 Forgiato a mano Hand forged

Particolare finitura Finish detail

1.1

mm 100 x 450 h 4”x 17-3/4” h 5/8”x1/8” ■ 16 x 4 1085

mm 70 x 350 h 2-3/4”x 13-3/4” h ■ 8 x 8 5/16”x5/16” 1090

mm 55 2-3/16”

mm 60 2-3/8”

mm 95 3-3/4”

mm 120 x 290 h 4-3/4”x 11-3/8” h 5/8”x1/8” ■ 16 x 4 1087

mm 70 x 350 h 2-3/4”x 13-3/4” h 5/8”x1/8” ■ 16 x 4 1095

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 75 x 720 h 3”x 28-3/8” h 3/4”x1/4” ■ 20 x 6 1081

mm 120 4-3/4”

mm 120 x 450 h 4-3/4”x 17-3/4” h 5/8”x1/8” ■ 16 x 4 1075 3/4”x1/4” ■ 20 x 6 1076

mm 70 2-3/4”

mm 57 2-3/16”

mm 100 4”

mm 325 12-3/4”

mm 170 6-3/4”

mm 75 3”

mm 92 3-5/8”

9

1.1 Interno Volute2011

8-04-2011

17:58

Pagina 10

Volute rifinite a freddo Cold finished scrolls Ferro pieno quadro ■ Square iron

1.1

Ferro pieno piatto ■ Flat iron

Ferro pieno tondo ● Round iron

mm 50 x 250 h 2”x 10” h 1/2”x1/8” ■ 12 x 3 1150

10

mm 125 5”

mm 55 x 250 h 2-3/16”x 10” h 1/2”x1/8” ■ 12 x 3 1160

mm 110 x 280 h 4-3/8”x 11” h 1/2”x3/16” ■ 12 x 5 1169-062

mm 68 2-11/16”

mm 100 4”

mm 67 2-5/8”

mm 45 x 280 h 1-3/4”x 11” h 1/2”x1/8” ■ 12 x 3 1155

mm 67 2-5/8”

mm 67 2-5/8”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 35 1-3/8”

mm 60 x 130 h 2-3/8”x 5-1/8” h 1/2”x1/8” 1148-061 ■ 12 x 3

mm 75 3”

mm 83 3-1/4”

mm 40 1-5/8”

mm 85 3-3/8”

mm 140 5-1/2”

mm 35 1-3/8”

mm 35 1-3/8”

mm 35 1-3/8”

1.1

mm 95 x 280 h 1170

■ 12 x 5

3-3/4”x 11” h 1/2”x3/16”

mm 80 x 250 h 3-1/8”x 10” h 1/2”x1/4” ■ 12 x 6 3165

1.2 Interno Volute2011

18-04-2011

11:56

Pagina 11

Elementi decorativi Decorative Elements Martellato Hammered

1.2

Rifinito a caldo Hot finished

Forgiato a mano Hand forged

Particolare finitura Finish detail

1.2

mm 100 4”

mm 100 4”

mm 100 x 100 h 4”x 4” h 3/8” ■ 10 1200-024

mm 100 x 100 h 4”x 4” h 1/2” ■ 12 1200-025

mm 100 4”

mm 100 x 120 h 4”x 4-3/4” h 1/2”x 1/4” ■ 12 x 6 1205-063

mm 100 x 70 h 4”x 2-3/4” h Sp 8 Th 5/16” 1210-008

mm 285 x 100 h 11-1/4” x 4” h 5/8”x 5/16” ■ 16 x 8 1250-070

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 100 4”

11

1.3 Interno Volute2011

8-04-2011

18:00

Pagina 12

Volute forgiate Hand forged scrolls Ferro pieno quadro ■ Square iron

1.3

Ferro pieno piatto ■ Flat iron

Ferro pieno tondo ● Round iron

12

mm 120 x 470 h - 4-3/4”x18-1/2” h ■ 14

9/16”

mm 120 x 470 h - 4-3/4”x18-1/2” h 1310-245

mm 95 3-3/4” mm 95 3-3/4”

mm 120 x 470 h 4-3/4”x 18-1/2” h 9/16“ ■ 14 1301-226

mm 90 3-1/2”

mm 90 3-1/2”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 120 x 470 h 4-3/4”x 18-1/2” h 1/2“ ■ 12 1300-225

1305-226

mm 90 3-1/2” mm 90 3-1/2”

mm 90 3-1/2”

mm 90 3-1/2”

1.3

● 12

1/2”

mm 120 x 470 h 4-3/4”x 18-1/2” h 5/8“ ■ 16 1303-227

1.5 Interno Volute2011

8-04-2011

18:02

Pagina 13

Volute rifinite a caldo Hot finished scrolls Martellato Hammered

1.5

Rifinito a caldo Hot finished

Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 45 1-3/4”

mm 45 1-3/4”

mm 45 1-3/4”

mm 70 x 120 h 2-3/4”x 4-3/4” h 1/2”x 1/4” ■ 12 x 6 1505 5/8”x 1/4” ■ 16 x 6 1507

mm 70 x 120 h 2-3/4”x 4-3/4” h ■ 12 x 6 1/2”x1/4” 1505-063R ■ 16 x 6 5/8”x1/4” 1505-069R

mm 75 3”

mm 60 x 100 h 2-3/8”x 4” h ■ 12 x 6 1/2”x1/4” 1500-063R ■ 16 x 6 5/8”x1/4” 1500-069R

mm 45 1-3/4”

mm 50 2”

mm 60 x 100 h 2-3/8”x 4” h ■ 12 x 6 1/2”x 1/4” 1500 ■ 16 x 6 5/8”x 1/4” 1500-069

mm 50 2”

mm 45 1-3/4”

1.5

mm 80 x 140 h 3-1/8”x 5-1/2” h mm 80 x 140 h 3-1/8”x 5-1/2” h mm 60 x 120 h 2-3/8”x 4-3/4” h mm 80 x 180 h 3-1/8”x 7” h ■ 12 x 6 1/2”x 1/4” 1505-163R ■ 12 x 6 1/2”x1/4” 1509-063 ■ 12 x 6 1/2”x 1/4” 1509-163 ■ 12 x 6 1/2”x 1/4” 1505-163 ■ 16 x 6 5/8”x 1/4” 1505-169R ■ 16 x 6 5/8”x1/4” 1509-069 ■ 16 x 6 5/8”x 1/4” 1509-169 ■ 16 x 6 5/8”x 1/4” 1505-169

mm 120 x 305 h 4-3/4”x 12” h ■ 12 x 6 1/2”x 1/4” 1508-363 ■ 16 x 6 5/8”x 1/4” 1508-369

mm 80 3-1/8”

mm 80 3-1/8”

mm 60 2-3/8”

mm 110 x 270 h 4-3/8”x 10-5/8” h mm 110 x 270 h 4-3/8”x 10-5/8” h 1/2”x 1/4” 1510-063R ■ 12 x 6 ■ 12x6 1/2”x 1/4” 1510 5/8”x 1/4” 1510-069R ■ 16 x 6 ■ 16x6 5/8”x 1/4” 1512

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 80 x 220 h 3-1/8”x 8-5/8” h ■ 12 x 6 1/2”x 1/4” 1505-363 ■ 16 x 6 5/8”x 1/4” 1505-369

mm 80 3-1/8”

mm 55 2-3/16”

mm 60 2-3/8”

13

1.5 Interno Volute2011

8-04-2011

18:02

Pagina 14

Volute rifinite a caldo Hot finished scrolls Ferro pieno quadro ■ Square iron

1.5

Ferro pieno piatto ■ Flat iron

Ferro pieno tondo ● Round iron

1.5

14

mm 105 x 150 h 4-1/8”x 6” h ■ 12 x 6 1/2”x 1/4” 1555

mm 50 x 230 h 2”x 9” h ■ 12 x 6 1/2”x 1/4” 1560

mm 60 x 105 h 2-3/8”x 4-1/8” h ■ 12 x 6 1/2”x 1/4” 1551

mm 35 1-3/8” mm 70 2-3/4”

mm 70 2-3/4”

mm 90 x 140 h 3-1/2”x 5-1/2” h 1/2”x 1/4” ■ 12 x 6 1520

mm 55 2-3/16”

mm 60 x 105 h 2-3/8”x 4-1/8” h ■ 12 x 6 1/2”x 1/4” 1550

mm 33 1-5/16”

mm 57 2-1/4”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 70 x 140 h 2-3/4”x 5-1/2” h 1/2”x 1/4” ■ 12 x 6 1540 5/8”x 1/4” ■ 16 x 6 1545

mm 100 x 165 h 4”x 6-1/2” h ■ 12x6 1/2”x1/4” 1515-063R ■ 16x6 5/8”x1/4” 1515-069R

mm 55 2-3/16”

mm 47 1-7/8”

mm 100 x 165 h 4”x 6-1/2” h 1/2”x 1/4” ■ 12 x 6 1515 5/8”x 1/4” ■ 16 x 6 1517

mm 62 2-7/16”

mm 62 2-7/16”

mm 35 1-3/8”

mm 50 2”

mm 90 x 140 h 3-1/2”x 5-1/2” h ■ 12x6 1/2”x 1/4” 1520-063R

1.5 Interno Volute2011

8-04-2011

18:02

Pagina 15

Volute rifinite a caldo Hot finished scrolls

1.5

Rifinito a caldo Hot finished

Martellato Hammered

Forgiato a mano Hand forged

Particolare finitura Finish detail

1.5

mm 65 2-9/16”

mm 120 x 220 h 4-3/4”x 8-5/8” h ■ 12 x 6 1/2”x 1/4” 1518-063 ■ 16 x 6 5/8”x 1/4” 1518-069

mm 95 3-3/4”

mm 85 3-3/8”

mm 85 3-3/8”

mm 50 2”

mm 50 2”

mm 65 2-9/16”

mm 60 2-3/8”

mm 65 2-9/16”

mm 120 x 220 h 4-3/4”x 8-5/8” h 1/2”x 1/4” ■ 12 x 6 1518-063R 5/8”x 1/4” ■ 16 x 6 1518-069R

mm 75 3”

mm 75 3”

4-3/4”x11-3/8” h ■12 x 6 ■16 x 6

1/2”x 1/4” 5/8”x 1/4”

mm 125 x 360 h 1518-263 1518-269

5”x 14-1/8” h

■ 12 x 6 ■ 16 x 6

1/2”x 1/4” 5/8”x 1/4”

mm 125 x 360 h 1518-263R 1518-269R

5”x 14-1/8” h

■12 x 6 ■16 x 6

1/2”x 1/4” 5/8”x 1/4”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 120 x 290 h 1518-163R 1518-169R

mm 100 4”

mm 95 3-3/4”

mm 100 4”

mm 60 2-3/8”

mm 65 2-9/16”

mm 65 2-9/16”

mm 70 2-3/4”

mm 120 x 290 h 4-3/4”x 11-3/8” h 1/2”x 1/4” ■ 12 x 6 1518-163 5/8”x 1/4” ■ 16 x 6 1518-169

15

1.5 Interno Volute2011

8-04-2011

18:02

Pagina 16

Volute rifinite a caldo Hot finished scrolls Ferro pieno quadro ■ Square iron

1.5

Ferro pieno piatto ■ Flat iron

Ferro pieno tondo ● Round iron

mm 85 3-3/8”

mm 95 3-3/4”

mm 100 4”

mm 85 3-3/8”

mm 95 3-3/4”

mm 100 4”

1.5

mm 120 x 290 h 4-3/4”x 11-3/8” h 1/2”x 1/4” ■ 12 x 6 1519-163 5/8”x 1/4” 1519-169 ■ 16 x 6

mm 125 x 360 h 5”x 14-1/4” h 1/2”x 1/4” ■ 12 x 6 1519-263 5/8”x 1/4” 1519-269 ■ 16 x 6

16

mm 110 x 280 h 4-3/8”x 11” h 1/2”x 1/4” ■ 12 x 6 1525

mm 135 5-3/8” mm 70 2-3/4”

mm 145 5-3/4”

mm 90 3-1/2”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2009

mm 65 2-9/16”

mm 55 2-3/16”

mm 95 x 105 h 3-3/4”x 4” h 1/2”x 1/4” ■ 12 x 6 1519-063 5/8”x 1/4” 1519-069 ■ 16 x 6

mm 105 x 300 h ■ 12 1525-125

4”x 12” h 1/2”

mm 180 x 160 h 7”x 6-1/4” h 1568-060R ■ 10 x 5 3/8”x 3/16”

1.5 Interno Volute2011

8-04-2011

18:02

Pagina 17

Volute rifinite a caldo Hot finished scrolls

1.5

Rifinito a caldo Hot finished

Martellato Hammered

Forgiato a mano Hand forged

Particolare finitura Finish detail

1.5

mm 120 x 170 h 4-3/4”x 6-3/4” h 1/2”x 1/4” ■ 12 x 6 1575

mm 75 x 125 h ■ 12 1605

3”x 5” h 1/2”

mm 80 x 130 h 3-1/8”x 5-1/8” h 9/16” ■ 14 1606

mm 45 1-3/4”

mm 125 x 235 h 5”x 9-1/4” h 1/2”x 1/4” ■ 12 x 6 1570 5/8”x 1/4” ■ 16 x 6 1571

mm 55 2-3/16”

mm 95 3-3/4”

mm 40 1-5/8”

mm 16 5/8”

mm 120 x 280 h ■ 12 1615 ■ 14 1616

mm 90 3-1/2”

4-3/4”x 11” h 1/2” 9/16”

mm 130 x 200 h 5-1/8”x 8” h 1/2” ■ 12 1620

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 110 x 210 h 4-3/8”x 8-1/4” h 1/2” ■ 12 1610 9/16” ■ 14 1611

mm 95 3-3/4”

mm 75 3”

mm 40 1-5/8”

mm 60 2-3/8”

17

1.5 Interno Volute2011

8-04-2011

18:02

Pagina 18

Volute rifinite a caldo Hot finished scrolls Ferro pieno quadro ■ Square iron

Ferro pieno piatto ■ Flat iron

1.5 Ferro pieno tondo ● Round iron

1.5

18

mm 110 x 210 h 1610-025B 1610-026B

4-3/8”x 8-1/4” h

mm 220 x 290 h 1621-025B

8-5/8”x 11-3/8” h

■ 12 ■ 14

1/2” 9/16”

mm 120 x 280 h 1615-025B 1615-026B

4-3/4”x 11” h ■ 12 ■ 14

1/2” 9/16”

mm 140 5-1/2”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 75 x 125 h 3”x 5” h 1/2” ■ 12 1605-025B 9/16” ■ 14 1605-026B

mm 220 x 290 h 1621-025

8-5/8”x 11-3/8” h ■ 12

1/2”

■ 12

1/2”

mm 220 x 290 h 1621-025R

8-5/8”x 11-3/8” h ■ 12

1/2”

1.5 Interno Volute2011

8-04-2011

18:02

Pagina 19

Volute rifinite a caldo Hot finished scrolls Martellato Hammered

1.5

Rifinito a caldo Hot finished

mm 70 2-3/4”

Forgiato a mano Hand forged

Particolare finitura Finish detail

1.5 mm 55 2-3/16”

mm 55 2-3/16”

mm 70 2-3/4”

mm 70 2-3/4”

mm 100 4”

mm 70 x 400 h 2-3/4”x 15-3/4” h 1/2” ■ 12 1630-025 9/16” ■ 14 1630-026

mm 70 x 400 h 2-3/4”x 15-3/4” h ■ 14 x 5 9/16”x 3/16” 1630-064B ■ 16 x 8 5/8”x 5/16” 1630-070B

mm 100 x 300 h 4”x 12” h 1/2” ■ 12 1630-125 9/16” ■ 14 1630-126

mm 130 x 290 h 5-1/8”x 11-3/8” h 1/2” ■ 12 1630-325 9/16” ■ 14 1630-326

mm 230 x 250 h 9”x 10” h 1/2” ■ 12 1630-525 9/16” ■ 14 1630-526

mm 230 x 250 h 9”x 10” h 1/2” ■ 12 1630-525B 9/16” ■ 14 1630-526B

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 230 9”

mm 190 7 - 1/2”

mm 230 9”

mm 190 7 - 1/2”

mm 100 4”

mm 130 5-1/8”

19

1.5 Interno Volute2011

8-04-2011

18:02

Pagina 20

Volute rifinite a caldo Hot finished scrolls Ferro pieno quadro ■ Square iron

1.5 Ferro pieno tondo ● Round iron

Ferro pieno piatto ■ Flat iron

1.5

mm 190 7 - 1/2”

mm 230 9”

mm 110 4 - 3/8”

mm 140 5 - 1/2”

mm 110 4 - 3/8”

mm 140 5 - 1/2”

mm 230 x 250 h 9”x 10” h ■ 14 x 5 9/16”x 3/16” 1630-564 5/8”x 1/4” ■ 16 x 6 1630-569

mm 140 x 300 h 5-1/2”x 12” h 1/2” ■ 12 1636-325 9/16” ■ 14 1636-326

mm 140 x 300 h 5-1/2”x 12” h 1/2” ● 12 1636-345 9/16” ● 14 1636-346

mm 80 3 - 1/8”

mm 110 4 - 3/8”

mm 130 5 - 1/8” mm 190 7 - 1/2”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

20

mm 110 2 - 3/4”

mm 100 4” mm 70 2 - 3/4”

mm 100 4”

mm 100 x 300 h 4”x 12” h 1/2” ■ 12 1637-225

mm 100 x 300 h 4”x 12” h 1/2” ■ 12 1638-225

mm 240 x 480 h 1645-026B

9-1/2”x 19” h ■ 14

9/16”

1.5 Interno Volute2011

18-04-2011

12:02

Pagina 21

Volute rifinite a caldo Hot finished scrolls

1.5

Rifinito a caldo Hot finished

Martellato Hammered

Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 55 2-3/16”

1.5

mm 75 x 125 h ● 12 1655

3”x 5” h

mm 80 3-1/8”

mm 55 2-3/16”

mm 70 2-3/4”

mm 40 1-5/8”

mm 60 2-3/8”

mm 110 x 210 h 4-3/8”x 8-1/4” h 1/2” ● 12 1660 9/16” ● 14 1661

1/2”

4-3/4”x 11” h 1/2” 9/16”

mm 250 x 720 h 10”x 28-3/8” h 3230

■ 12

1/2”

mm 250 x 820 h 10”x 32-1/4” h 3231

■ 12

1/2”

mm 250 x 1000 h 10”x 39-3/8” h 3232

■ 12

1/2”

mm 250 x 1200 h 10”x 47-1/4” h 3233

■ 12

1/2”

mm 250 x 1500 h 10”x 59” h 3234

■ 12

1/2”

mm 250 x 1800 h 10”x 70-7/8” h 3235

■ 12

1/2”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 210 8-1/4”

mm 70 2-3/4”

mm 80 x 130 h 3-1/8”x 5-1/8” h 9/16” ● 14 1656

mm 120 x 280 h ● 12 1665 ● 14 1666

21

1.6 Interno Volute2011

8-04-2011

18:03

Pagina 22

Volute rifinite a spina di pesce “Fish-tail” finished scrolls Ferro pieno quadro ■ Square iron

Ferro pieno piatto ■ Flat iron

1.6

Ferro pieno tondo ● Round iron

mm 40 1-5/8”

mm 40 1-5/8”

mm 60 x 110 h 2-3/8”x 4-3/8” 1/2”x 1/4” ■ 12 x 6 1580 01 ■ 14 x 5 9/16”x 3/16” 1580 02 5/8”x 1/4” ■ 16 x 6 1580 03

mm 45 1-3/4”

1.6

mm 75 x 120 h 3”x4-3/4” 1582 01 1582 02 1582 03

1/2”x 1/4” ■ 12 x 6 ■ 14 x 5 9/16”x 3/16” 5/8”x 1/4” ■ 16 x 6

mm 80 x 140 h 3-1/8”x 5-1/2” 1584 01 1584 02 1584 03

1/2”x 1/4” ■ 12 x 6 ■ 14 x 5 9/16”x 3/16” 5/8”x 1/4” ■ 16 x 6

mm 65 2-9/16”

22

mm 80 3-1/8”

mm 85 3-3/8”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 40 1-5/8”

mm 60 2-3/8”

mm Ø 105 Ø 4” mm Ø 125 Ø 5” mm 110 x 210 h 4-3/8”x 8-14” h mm 110 x 280 h 4-3/8”x 11” h 1/2”x 1/4” 1/2”x 1/4” 1590 01 1/2”x 1/4” 1594-063 ■ 12 x 6 1/2”x 1/4” 1595-063 ■ 12 x 6 ■ 12 x 6 ■ 12 x 6 1588 01 ■ 14 x 5 9/16”x 3/16” 1595-064 ■ 14 x 5 9/16”x 3/16” ■ 14 x 5 9/16”x 3/16” 1590 02 ■ 14 x 5 9/16”x 3/16” 1594-064 1588 02 5/8”x 1/4” 5/8”x 1/4” 1590 03 5/8”x 1/4” 1594-069 ■ 16 x 6 5/8”x 1/4” 1595-069 ■ 16 x 6 ■ 16 x 6 ■ 16 x 6 1588 03

1.7 Interno Volute2011

8-04-2011

18:05

Pagina 23

Volute rifinite con pallina Scrolls with hot finished ball Rifinito a caldo Hot finished

Martellato Hammered

1.7

Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 75 3”

mm 110 x 180 h 4-3/8”x 7” h 1/2“ ● 12 1708-045M

mm 125 x 290 h 5”x 11-3/8” h 1/2“ ● 12 1709-045

mm 60 2-3/8”

1.7

mm 90 3-1/2”

mm 90 3-1/2”

mm 70 2-3/4”

mm 60 2-3/8”

mm 75 3”

mm 125 x 290 h 1709-045M

5”x 11-3/8” h ● 12

1/2“

5-1/8”x 14-1/8” h ● 12

1/2“

mm 125 x 310 h 5”x 12-1/4” h 9/16“ ● 14 1710

mm 90 3-1/2”

mm 125 x 310 h 5”x 12-1/4” h 9/16“ ■ 14 1710-026

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 130 x 360 h 1709-145M

mm 90 3-1/2”

mm 90 3-1/2”

mm 60 2-3/8”

mm 75 3”

23

1.7 Interno Volute2011

8-04-2011

18:05

Pagina 24

Volute rifinite con pallina Scrolls with hot finished ball Ferro pieno quadro ■ Square iron

Ferro pieno tondo ● Round iron

mm 48 1-7/8”

mm 200 8”

mm 75 3”

mm 65 2-9/16”

mm 65 2-9/16”

1.7

Ferro pieno piatto ■ Flat iron

1.7

mm 170 x 380 h 6-3/4”x 15”h 1/2“ ■ 12 1642-025

mm 85 x 150 h 3-3/8”x 6” h 3/8“ ● 10 1750 3/8“ ■ 10 1751

24

mm 200 8”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 75 3”

mm 65 2-9/16”

mm 65 2-9/16”

mm 170 x 380 h 6-3/4”x 15”h 1/2“ ● 12 1642-045

mm 170 x 380 h 6-3/4”x 15”h 9/16“ ■ 14 1735

mm 170 x 380 h 6-3/4”x 15”h 9/16“ ● 14 1740

1.8 Interno Volute2011

11-04-2011

16:59

Pagina 25

Volute con finitura “barocco” “Baroque styled” scrolls Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 40 1-5/8”

Rifinito a caldo Hot finished

Martellato Hammered

1.8

1.8

mm 70 x 120 h 2-3/4”x 4-3/4” h ■ 14 x 5 9/16” x 3/16” 4300

mm 70 2-3/4”

mm 70 2-3/4”

mm 40 1-5/8”

mm 40 1-5/8”

mm 60 2-3/8”

mm 90 x 200 h 3-1/2”x 8” h ■ 14 x 5 9/16” x 3/16” 4310

mm 110 x 290 h 4-3/8”x 11-3/8” h ■ 14 x 5 9/16” x 3/16” 4315 mm 60 2-3/8”

4-3/8”x 7” h 1/2”x 1/4“

mm 70 x 140 h 2-3/4”x 5-1/2” h 1/2” x 1/4“ ■ 12 x 6 4335

mm 70 2-3/4”

mm 90 x 200 h 4340

■ 12 x 6

3-1/2”x 8” h 1/2”x 1/4”

mm 80 x 600 h 3-1/8”x 23-5/8” h 1/2” x 1/4“ ■ 12 x 6 4350

mm 42 1-11/16”

mm 70 x 120 h 2-3/4”x 4-3/4” h 1/2”x 1/4” ■ 12 x 6 4360

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 110 x 290 h 4-3/8”x 11-3/8” h 1/2”x 1/4” ■ 12 x 6 4345

mm 60 2-3/8”

mm 70 2-3/4”

mm 480 19”

mm 40 1-5/8”

mm 110 x 180 h ■ 12 x 6 4330

mm 52 2-1/16”

mm 75 3”

mm 40 1-5/8”

mm 40 1-5/8”

mm 50 2”

25

1.8 Interno Volute2011

11-04-2011

16:59

Pagina 26

Volute con finitura “barocco” “Baroque styled” scrolls Ferro pieno quadro ■ Square iron

Ferro pieno piatto ■ Flat iron

1.8 Ferro pieno tondo ● Round iron

26

mm 60 x 220 h 2-3/8”x 8-5/8” h ■ 16 x 8 5/8”x 5/16” 4110

mm 60 x 220 h 2-3/8”x 8-5/8” h ■ 16 x 8 5/8”x 5/16” 4111

mm 60 x 120 h 2-3/8”x 4-3/4” h 5/8”x 5/16” ■ 16 x 8 4120

mm 80 x 120 h 3-1/8”x 4-3/4” h 1/2” ● 12 4420

mm 220 x 560 h 8-5/8”x 22” h ■ 16 x 8 5/8” x 5/16” 4115

mm 220 x 560 h 8-5/8”x 22” h ■ 16 x 8 5/8” x 5/16” 4116

mm 220 x 560 h ● 12 4415

mm 220 x 560 h ● 12 4416

mm 150 7-1/2”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 50 2”

mm 50 2”

mm 125 5”

mm 95 3-3/4”

1.8

8-5/8”x 22” h 1/2”

8-5/8”x 22” h 1/2”

1.8 Interno Volute2011

11-04-2011

16:59

Pagina 27

Volute con finitura “barocco” “Baroque styled” scrolls Martellato Hammered

Rifinito a caldo Hot finished

1.8

Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 90 3-1/2”

mm 100 4”

mm 90 3-1/2”

mm 130 x 350 h 5-1/8”x13-3/4”h 1/2” ● 12 4418

mm 140 x 320 h 5-1/2”x12-5/8”h ■ 16 x 8 5/8”x 5/16” 4119

mm 140 x 320 h 5-1/2”x12-5/8”h 1/2” ● 12 4419

mm 80 3-1/8”

mm 120 x 180 h 4-3/4”x 7” h mm 120 x 350 h 4-3/4”x13-3/4”h mm 110 x 160 h 4-3/8”x 6-1/4” h 1/2” 4133 5/8”x 5/16” ● 12 ■ 16 x 8 5/8”x 5/16” 4134 ■ 16 x 8 4425

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 110 x 165 h 4-3/8”x 6-1/2” h ■ 16 x 8 5/8”x 5/16” 4125

mm 70 2-3/4”

mm 60 2-3/8”

mm 150 7-1/2”

mm 95 3-3/4”

mm 130 x 350 h 5-1/8”x13-3/4”h 5/8”x 5/16” ■ 16 x 8 4118

mm 100 4”

mm 60 2-3/8”

mm 60 2-3/8”

1.8

27

1.8 Interno Volute2011

11-04-2011

16:59

Pagina 28

Volute con finitura “barocco” “Baroque styled” scrolls Ferro pieno quadro ■ Square iron

Ferro pieno piatto ■ Flat iron

1.8 Ferro pieno tondo ● Round iron

mm 110 4-3/8”

mm 110 4-3/8”

mm 45 1-3/4”

mm 40 1-5/8”

1.8

mm 130 x 175 h 5-1/8”x 7” h ■ 16 x 8 5/8”x 5/16” 4131

mm 125 x 190 h 5”x 7-1/2” h 1/2” ● 12 4430

mm 125 x 190 h 5”x 7-1/2” h 1/2” ● 12 4431

mm 130 5-1/8”

mm 70 2-3/4”

mm 130 x 175 h 5-1/8”x 7” h ■ 16 x 8 5/8”x 5/16” 4130

mm 200 x 280 h 8”x 11” h ■ 16 x 8 5/8”x 5/16” 4141

mm 200 x 290 h 8”x 11-3/8” h 1/2” ● 12 4440

mm 200 x 290 h 8”x 11-3/8” h 1/2” ● 12 4441

28

mm 140 5-1/2”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 58 2-1/4”

mm 200 x 280 h 8”x 11” h ■ 16 x 8 5/8”x 5/16” 4140

1.8 Interno Volute2011

11-04-2011

16:59

Pagina 29

Volute con finitura “barocco” “Baroque styled” scrolls Martellato Hammered

Rifinito a caldo Hot finished

1.8

Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 75 3”

mm 190 7-1/2”

1.8

mm 265 x 400 h 10-1/2”x 15-3/4” h ■ 16 x 8 5/8”x 5/16” 4132

mm 270 x 400 h ● 12 4432

10-5/8” 15-3/4” h 5/8”x 5/16”

mm 200 x 300 h 8”x 12” h ■ 16 x 8 5/8”x 5/16” 4135

mm 200 x 300 h ● 12 4435

8”x 12” h 5/8”x 5/16”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 115 4-1/2”

mm 65 2-9/16”

mm 115 x 185 h 4-1/2”x 7-1/4” h ■ 16 x 8 5/8”x 5/16” 4123

mm 120 4-3/4”

mm 45 1-3/4”

mm 145 x 225 h 5-3/4”x 9” h 5/8”x 5/16” ■ 16 x 8 4128

29

1.9A Interno Volute2011

8-04-2011

18:08

Pagina 30

Volute con finitura a nocciolo Round ended scrolls Ferro pieno quadro ■ Square iron

1.9

Ferro pieno piatto ■ Flat iron

Ferro pieno tondo ● Round iron

mm 170 6-3/4”

1.9

mm 185 x 500 h 7-1/4”x 19-5/8” h 1/2” ■ 12 4411-525

mm 270 x 570 h 10-5/8”x 22-1/2” h 1/2” ■ 12 4411-725

mm 110 x 180 h 4-3/8”x 7” h 9/16” ● 14 4410-046M

mm 75 3”

mm 115 x 195 h 4-1/2”x 7-5/8” h 1/2” ■ 12 4410-125

mm 70 2-3/4”

mm 70 2-3/4” mm 140 5-1/2”

mm 200 8”

mm 55 2-3/16”

mm 105 4-1/8”

mm 105 4-1/8”

mm 140 5-1/2”

30

mm 190 x 300 h 7-1/2”x 12” h 9/16” ● 14 4410-346M

mm 125 x 290 h 5”x 11-3/8” h 9/16” ● 14 4411-146M

mm 130 x 360 h 5-1/8”x 14-1/8” h 9/16” ● 14 4411-246M

mm 120 4-3/4”

mm 110 4-3/8”

mm 100 4”

mm 120 4-3/4”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 65 2-9/16”

mm 80 3-1/8”

mm 150 x 530 h 6”x 21” h 9/16” ● 14 4411-346M

1.9A Interno Volute2011

8-04-2011

18:08

Pagina 31

Volute con finitura a nocciolo Round ended scrolls Martellato Hammered

Rifinito a caldo Hot finished

1.9 Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 80 3-1/8”

mm 70 x 140 h 2-3/4”x 5-1/2”h 5/16” ■8 4193

mm 80 x 140 h 3-1/8”x 5-1/2”h 3/8” ● 10 4199

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 70 x 120 h 2-3/4”x 4-3/4”h 3/8” ● 10 4189

mm 110 x 220h 4-3/8”x 8-5/8”h 5/16” ■8 4192 3/8” ● 10 4196

mm 50 2”

mm 120 x 290h 4-3/4”x11-3/8”h 5/16” ■8 4191 3/8” ● 10 4195

mm 50 2”

mm 170 x 235 h 6-3/4”x 9-1/4”h 1/2”x 1/4” ■ 12 x 6 4185

mm 125 x 360h 5”x14-1/8”h 5/16” ■8 4190 3/8” ● 10 4194

mm 50 2”

mm 110 4-3/8”

mm 130 x 350h 5-1/8”x 13-3/4”h 1/2”x 1/4” ■ 12 x 6 4188

mm 85 3-3/8”

mm 95 3-3/4”

mm 90 3-1/2”

mm 45 1-3/4”

mm 55 2-3/16”

mm 55 2-3/16”

1.9

31

1.9B Interno Volute2011

8-04-2011

18:08

Pagina 32

Volute con foglioline

V

Scrolls with forged leaves Ferro pieno quadro ■ Square iron

Ferro pieno piatto ■ Flat iron

1.9

Ferro pieno tondo ● Round iron

mm 60 2-3/8”

mm 85 x 270 h 3-3/8”x 10-5/8”h ■ 20 x 10 3/4”x 3/8“ 4160

mm 130 x 180 h 5-1/8”x 7”h ■ 12 x 6 1/2”x 1/4” 4170

mm 70 2-3/4”

mm 65 2-9/16”

mm 90 x 155 h 3-1/2”x 6-1/8”h ■ 20 x 10 3/4”x 3/8“ 4155

mm 80 3-1/8”

mm 160 x 160 h 6-1/4”x 6-1/4”h 3/4”x 3/8“ ■ 20 x 10 4150

mm 50 2”

mm 60 2-3/8”

1.9

mm 95 x 295 h 3-3/4”x 11-5/8”h ■ 12 x 6 1/2”x 1/4” 4175

32

mm 120 x 290 h 4-3/4”x 11-3/8”h ■ 12 x 6 1/2”x 1/4” 4178

mm 75 3”

mm 82 3-1/4”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 45 1-3/4”

mm 60 2-3/8”

mm 120 x 290 h 4-3/4”x 11-3/8”h ■ 12 x 6 1/2”x 1/4” 4179

mm 100 x 220 h 4”x 8-5/8”h ■ 12 x 6 1/2”x 1/4” 4176

mm 100 x 220 h 4”x 8-5/8”h ■ 12 x 6 1/2”x 1/4” 4177

1.9B Interno Volute2011

8-04-2011

18:08

Pagina 33

Volute 20x10 con finitura a nocciolo Round ended scrolls 20x10 Rifinito a caldo Hot finished

Martellato Hammered

Forgiato a mano Hand forged

1.9 Particolare finitura Finish detail

mm 50 2”

mm 55 2-3/16”

1.9

mm 170 x 100 h 6-3/4”x 4”h ■ 20 x 10 3/4”x 3/8” 4152-075

mm 200 x 120 h 8”x 4-3/4”h ■ 20 x 10 3/4”x 3/8” 4152-175

mm 65 2-9/16”

mm 90 3-1/2”

mm 130 x 360 h 5-1/8”x 14-1/8”h ■ 20 x 10 3/4”x 3/8” 4161-175

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 125 x 290 h 5”x 11-3/8”h ■ 20 x 10 3/4”x 3/8” 4161-075

mm 110 4-3/8”

mm 100 4”

mm 60 2-3/8”

mm 80 3-1/8”

33

1.10 Interno Volute2011

8-04-2011

18:09

Pagina 34

Volute con foglie Scrolls with leaves Ferro pieno quadro ■ Square iron

1.10

Ferro pieno piatto ■ Flat iron

Ferro pieno tondo ● Round iron

1.10

mm 40 1-5/8”

mm 240 9-1/2”

mm 180 7”

mm 75 3”

mm 80 x 310 h 3-1/8”x 12-1/4” h ■ 12 x 6 1/2”x 1/4” 4035

mm 80 x 310 h 3-1/8”x 12-1/4” h ■ 12 x 6 1/2”x 1/4” 4036

mm 120 x 360 h 4-3/4”x 14-1/8”h ■ 12 x 6 1/2”x 1/4” 4047

mm 120 x 360 h 4-3/4”x 14-1/8”h ■ 12 x 6 1/2”x 1/4” 4048

mm 100 4”

mm 130 5-1/8”

34

mm 110 4-3/8”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 60 2-3/8”

mm 75 3”

mm 160 x 410 h 6-1/4”x 16-1/8”h ■ 12 x 6 1/2”x 1/4” 4080

mm 160 x 410 h 6-1/4”x 16-1/8”h ■ 12 x 6 1/2”x 1/4” 4081

mm 120 x 240 h 4-3/4”x 9-1/2” h ■ 12 x 6 1/2”x 1/4” 4082

mm 120 x 240 h 4-3/4”x 9-1/2” h ■ 12 x 6 1/2”x 1/4” 4083

1.10 Interno Volute2011

8-04-2011

18:09

Pagina 35

Volute con foglie Scrolls with leaves Martellato Hammered

Rifinito a caldo Hot finished

1.10 Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 80 x 320 h 3-1/8”x 12-5/8” h ■ 12 x 6 1/2”x 1/4” 4075

mm 160 x 240 h 6-1/4”x 9-1/2” h 1/2”x 1/4” ■ 12 x 6 4096

mm 125 x 255 h 5”x 10” h ■ 12 x 6 1/2”x 1/4” 4100

mm 125 x 255 h 5”x 10” h ■ 12 x 6 1/2”x 1/4” 4101

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 70 2-3/4”

mm 95 3-3/4”

mm 160 x 240 h 6-1/4”x 9-1/2” h 1/2”x 1/4” ■ 12 x 6 4095

mm 160 x 250 h 6-1/4”x 10” h 1/2”x 1/4” ■ 12 x 6 4105

mm 55 2-3/16”

mm 80 x 320 h 3-1/8”x 12-5/8” h ■ 12 x 6 1/2”x 1/4” 4070

mm 60 2-3/8”

mm 160 x 380 h 6-1/4”x 15” h ■ 12 x 6 1/2”x 1/4” 4085

mm 80 3-1/8”

mm 85 3-3/8”

mm 240 9-1/2”

mm 125 5”

mm 310 12-1/4”

1.10

35

1.10 Interno Volute2011

8-04-2011

18:09

Pagina 36

Volute con foglie Scrolls with leaves Ferro pieno quadro ■ Square iron

1.10

mm 120 x 135 h 4-3/4”x 5-3/8”h 5/16” ●8 4454

5-1/2”x 8”h 3/8”

mm 140 x 200 h ● 10 4461

mm 120 x 135 h 4-3/4”x 5-3/8”h 5/16” ●8 4455

mm 95 3-3/4”

mm 40 1-5/8”

mm 115 x 120 h 4-1/2”x 4-3/4” h 5/16” ●8 4451

mm 130 5-1/8”

mm 125 4-7/8”

5-1/2”x 8”h 3/8”

mm 170 x 290 h 6-3/4”x 11-3/8”h 3/8” ● 12 4465

mm 170 x 290 h 6-3/4”x 11-3/8”h 3/8” ● 12 4466

mm 200 8”

mm 125 5”

mm 80 3-1/8”

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

36

Ferro pieno tondo ● Round iron

mm 75 3”

mm 35 1-3/8”

mm 115 x 120 h 4-1/2”x 4-3/4” h 5/16” ●8 4450

mm 145 5-3/4”

Ferro pieno piatto ■ Flat iron

mm 120 4-3/4”

mm 110 4-3/8”

mm 140 x 200 h ● 10 4460

1.10

mm 130 x 190 h 5-1/8”x 7-1/2” h 5/16” ●8 4459

mm 130 x 190 h 5-1/8”x 7-1/2” h 5/16” ●8 4458

mm 160 x 280 h 6-1/4”x 11” h 1/2” ● 12 4445

1.10 Interno Volute2011

8-04-2011

18:09

Pagina 37

Volute con foglie Scrolls with leaves Rifinito a caldo Hot finished

Martellato Hammered

1.10 Forgiato a mano Hand forged

Particolare finitura Finish detail

mm 210 8-1/4”

mm 50 2”

mm 25 1”

1.10

mm 320 x 340 h 12-5/8”x 13-3/8” h 1/2” ● 12 4536

mm 320 x 340 h 12-5/8”x 13-3/8” h 1/2” ● 12 4537

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright © 2011

mm 240 9-1/2”

mm 75 x 420 h 3”x 16-1/2” h ■ 16 x 8 5/8”x 5/16” 4248

37

Creato da Artifer s.r.l. - Tutti i diritti riservati - Copyright Š 2011

1.10 Interno Volute2011

1.10

38

8-04-2011 18:09 Pagina 38