MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED PROJECT BOOKLET SPRING 2022 COVER 0-000.00 Wood Innovation Design Center Vacation Cottages / PK Arkitektar Clyfford Still Museum / Allied Works Architecture
PART A
1A:
- Splash page
- Layer Wall Introduction
- Vacation Cottage Floor Plan Elevations Elevations & Sections
- Monolothic Wall Introduction
- Clyfford Still Museum Floor Plan Elevations Sections
- Curtain Wall Introduction
- Wood Innovation Design Center Floor Plan Elevations
Sections
1B:
- Splash page
- Vacation Cottage
- Clyfford Still Museum
- Wood Innovation Design Center
1C:
- Splash page
- Roof Section & Wall Section
- Floor Section & Foundation Section
PART B
1D:
- Splash page
- Wall to Roof Section Detail
- Floor to Wall Section Detail
- Window Jab Detail
- Foundation Footing Detail
A-000.00 A-100.00 A-101.00 A-102.00 A-103.00 A-200.00 A-201.00 A-202.00 A-203.00 A-300.00 A-301.00 A-302.00 A-303.00 B-200.00 B-201.00 B-202.00 B-203.00 C-300.00 C-301.00 C-302.00 D-400.00 D-401.00 D-402.00 D-403.00 D-404.00
2A: - Splash page - Wall Section - Floor Section - Elevation
2B: - Splash page - Wall to Roof Section Detail - Floor to Wall Section Detail - Window Jab Detail - Wall to Partition Section Detial
2C: - Splash page - Exterior Axon - Interior Axon
ANNOTATED BIBLIOGRAPHY
A-100.00 A-101.00 A-102.00 A-103.00 B-200.00 B-201.00 B-202.00 B-203.00 B-204.00 C-300.00 C-301.00 C-302.00 AB-500.00
MASTER OF ARCHITECTURE
COURSE: SP22_TSM2006
DETAILING AND CONSTRUCTION DOCUMENTS
INSTRUCTOR: MARY POLITES HELALUL ISLAM
DATE: 05/16/2022
SCALE: AS NOTED
0-000.00
TABLE OF
CONTENTS
MASTER OF ARCHITECTURE
COURSE: SP22_TSM2006
ASSIGNMENT ONE (A) – CASE STUDY FORENSICS
Analyze 3 buildings, one from each of the different assembly system types listed below. Choose buildings that broaden your range of knowledge. You will have a chance to refine your selection in later weeks.
- Layered Wall System: Vacation Cottages
- Monolithic Wall System: Clyfford Still Museum
- Curtain Wall System: Wood Innovation Design Center
DETAILING AND
CONSTRUCTION DOCUMENTS
INSTRUCTOR: MARY POLITES HELALUL ISLAM
DATE: 05/16/2022
SCALE: AS NOTED
A-000.00 1A
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED A-100.00 LAYERED WALL SYSTEM 1A - Fernanda Castro. “Vacation Cottage / PK Arkitektar.” ArchDaily. ArchDaily. December 15, 2015.
Ground Floor Plan
Vacation Cottages
PK Arkitektar
In 2012 award winning architecture firm, PK Aritektar was invited to and won a competition for vacation cottages for the Association of Academics in Iceland. The firm designed 20 carbon sensitive cabins located in Brekkuskógur, South West of Iceland. The cabins most prominent feature is its mending of the natural landscape into its sloped roofscape. The team at PK Aritektar wanted to create a semirural design using natural materials. With a goal of reducing carbon footprint as much possible.
” The building is a wooden construction resting on a concrete base. The exterior is clad with burnt hardwood paneling, utilizing a method well known in Japan, among other countries, to enhance the durability of the wood. The roof is a grass layer fused together with the surrounding slope, a traditional method used in the old vernacular turf houses in Iceland. The interior is composed of a floor finish of smooth-polished concrete, with walls and ceilings cladded in wood panels with the same intervals as on the exterior cladding.”
The construction details were left simple in order to cut down oncostly maintenance. The structure was erected using recycled materials, environmentally friendly systems such as geothermal hydro energy, all in accordance with the national ecological standards. Lastly but surely not less, the site is a picturesque parcel of land of the beautiful Iceland greenery and amazing views of lake, Laugarvatn.
MASTER OF ARCHITECTURE
DETAILING
SCALE: AS NOTED LAYERED WALL SYSTEM A-101.00
COURSE: SP22_TSM2006
AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
All quotes and images by archdaily.com Scale 1/8” = 1’- 0” 1A
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED LAYERED WALL SYSTEM A-102.00 Scale 1/8” = 1’- 0” 1A - Fernanda Castro. “Vacation Cottage / PK Arkitektar.” ArchDaily. ArchDaily. December 15, 2015.
MASTER OF ARCHITECTURE
DETAILING AND CONSTRUCTION DOCUMENTS
SCALE: AS NOTED LAYERED WALL SYSTEM A-103.00 Scale 1/8” = 1’- 0” 1A -
PK
COURSE: SP22_TSM2006
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
Fernanda Castro. “Vacation Cottage /
Arkitektar.” ArchDaily. ArchDaily. December 15, 2015.
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED A-200.00 MONOLITHIC WALL SYSTEM 1A - Ross, Kritiana. “Clyffors Still Museum / Allied Works Architecure.” ArchDaily. ArchDaily. January
MASTER OF ARCHITECTURE
DETAILING AND CONSTRUCTION DOCUMENTS
DATE:
SCALE: AS NOTED Clyfford Still Museum Allied Works Architecture “Through the trees, the structure of the building is visible, consisting of cast-in-place architectural concrete walls with a variety of surface relief and texture. The façade features thin, vertical lines of concrete that project from the building’s surface in a fractured, organic, and random pattern, creating a rich surface that changes in the intense Denver sunlight and forms varied shadows across.” All quotes by archdaily.com MONOLITHIC WALL SYSTEM A-201.00 01 02 1. Reception 2. Research Labs 3. Office 4. Painting Storage 5. Conservation Labs 6. Archive Display 7. Mechanical 8. Loading Ground Floor Plan Scale 1/32” = 1’- 0” 1A
COURSE: SP22_TSM2006
INSTRUCTOR: MARY POLITES HELALUL ISLAM
05/16/2022
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED MONOLITHIC WALL SYSTEM A-202.00 North Elevation Scale 1/16” = 1’- 0” West Elevation Scale 1/16” = 1’- 0” 1A - Brad Cloepfil “Clyffors Still Museum / Allied Works Architecure.” Archilovers. Archilovers. July 25, 2008.
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED MONOLITHIC WALL SYSTEM A-203.00 Scale 1/32” = 1’- 0” Scale 1/32” = 1’- 0” 02 01 1A - Ross, Kritiana. “Clyffors Still Museum / Allied Works Architecure.” ArchDaily. ArchDaily. January
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED A-300.00 CURTAIN WALL SYSTEM 1A -
Castro. “Wood Innovation Design Centre / Michael Green Architecture” 09 Oct 2021. ArchDaily. Accessed Feb. 6. 2022.
Fernanda
Wood Innovation Design Center
Micheal Green Architecture
The former tallest modern all timber structure, The Wood Innovation Design Center. Is still the benchmark for efficient timber design in the modern world. An 8-story mixed use building located in British Columbia. The structure was erected in 2015 and won a short list of notable awards such as the 2015 RAIC Award of Excellence for Innovation in Architecture. The project just like its name’s sake, Truly innovated in the construction and detailing of its wood curtain wall system. But more on that later.
“WIDC is about celebrating wood as one of the most beautiful and sustainable materials for building here in BC and around the globe. MGA have been champions of this message for quite some time and have been able to connect to a very global conversation of possibility. Our goal is to use the WIDC design as a stepping-stone for further innovation and scale that will continue to grow the wood story and industry.”
The architects wear their design on their sleeves so too speak. By featuring their innovative all wood timber structure and its summitry with the glass panels. The detail is then repeated throughout the floors. ” This is the best way to ensure that the BC wood economy grows: Through repeatable meaningful innovation.”
MASTER
DETAILING
SCALE:
OF ARCHITECTURE COURSE: SP22_TSM2006
AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
AS NOTED
All quotes and images
CURTAIN WALL SYSTEM A-301.00 2. Demonstration Area below 4. Elevator Lobby 5. Lecture Theater 6. Research Lab below 8. Electrical Platform 9. Mechanical Platform 13. Projection Room 14. Mezzanine 15. Storage Room First Floor Plan Scale 1/16” = 1’- 0” 01 1A
by MGArchitecture.com
MASTER OF ARCHITECTURE
DETAILING AND CONSTRUCTION DOCUMENTS
SCALE: AS NOTED CURTAIN WALL SYSTEM A-302.00 Scale 1/32” = 1’- 0” Scale: NTS 1A - “Wood Innovation Design Centre / Michael Green Architecture” MGK work.
COURSE: SP22_TSM2006
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED 01 CURTAIN WALL SYSTEM A-303.00 1. Vestibule 2. Demonstration Area 3. Future Cafe Space 5. Lecture Theatre 13.Projection Room 14. Mezzanine 16. Tenant Space 17. Classroom 18. Office Section Scale 1/16” = 1’- 0” 1A - Fernanda Castro. “Wood Innovation Design Centre / Michael Green Architecture” 09 Oct 2021. ArchDaily. Accessed Feb. 6. 2022.
ASSIGNMENT ONE (B) – CASE STUDY FORENSICS
Using Assignment One (A) as a launching point, produce supporting diagrams and an axonometric diagram to identify the major systems of each case study. Some speculation may be necessary, so back up your descriptions by providing technically appropriate explanations.
MASTER OF ARCHITECTURE
COURSE: SP22_TSM2006
DETAILING AND CONSTRUCTION DOCUMENTS
INSTRUCTOR: MARY POLITES HELALUL ISLAM
DATE: 05/16/2022
SCALE: AS NOTED
B-200.00 1B
MASTER OF ARCHITECTURE
DETAILING AND CONSTRUCTION DOCUMENTS
SCALE: AS NOTED OUTSIDE INSIDE OUTSIDE INSIDE OUTSIDE INSIDE OUTSIDE LAYERED WALL SYSTEM B-201.00 Wall Section Scale 3/4” = 1’- 0” Floor Section Scale 3/4” = 1’- 0” EXTERIOR TO INTERIOR 1. 70 mm Sawn hardwood strips 2. 45 mm Wood battens 3. 9 mm Plywood sheeting 4. 150 mm Rock-wool Insulation 5. 35 mm Wood battens 6. (2x) 13 mm Gypsum board INSIDE OUTSIDE INSIDE OUTSIDE Exterior Perspective 1B
COURSE: SP22_TSM2006
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
MASTER OF ARCHITECTURE
DETAILING AND CONSTRUCTION DOCUMENTS
DATE:
SCALE: AS NOTED MONOLITHIC WALL SYSTEM B-202.00 Wall Section Scale 1/2” = 1’- 0” Floor Section Scale 3/4” = 1’- 0” EXTERIOR TO INTERIOR 1. Concrete wall 2. Rigid insulation 3. Studs / Mechanical space 4. Blocking 5. Gypsum board 6. Interior finish INSIDE OUTSIDE INSIDE OUTSIDE INSIDE OUTSIDE INSIDE OUTSIDE INSIDE OUTSIDE INSIDE OUTSIDE Axon 1B
COURSE: SP22_TSM2006
INSTRUCTOR: MARY POLITES HELALUL ISLAM
05/16/2022
MASTER OF ARCHITECTURE
DETAILING AND CONSTRUCTION DOCUMENTS
SCALE: AS NOTED INSIDE OUTSIDE A B C D INSIDE OUTSIDE CURTAIN WALL SYSTEM B-203.00 Wall Section Scale 1/8” = 1’- 0” Floor Section Scale 3/4” = 1’- 0” EXTERIOR TO INTERIOR 1. Triple glazed thermally 2. Laminated veneer lumber mullion 3. Inside air INSIDE OUTSIDE INSIDE OUTSIDE A B C D INSIDE OUTSIDE Axon 1B
COURSE: SP22_TSM2006
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
MASTER OF ARCHITECTURE
COURSE: SP22_TSM2006
ASSIGNMENT ONE (C) – CASE STUDY FORENSICS
Select one case study assembly from Assignment One (B) to further explore in greater detail and understanding. Draw and annotate a wall section, an exterior wall plan detail, a partition section detail and an elevation detail. Each drawing should show enough information to convey how it’s assembled, and the components relate to each other. Some speculation may be necessary, so back up your descriptions by providing technically appropriate explanations.
Curtain Wall System
- Wood Innovation Center
DETAILING AND CONSTRUCTION DOCUMENTS
INSTRUCTOR: MARY POLITES HELALUL ISLAM
DATE: 05/16/2022
SCALE: AS NOTED
C-300.00 1C
MASTER OF ARCHITECTURE
DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL
DATE: 05/16/2022 SCALE: AS NOTED TRIPLE GLAZED THERMALLY - BROKEN CURTAIN WALL WITH ARGON FILLING AND LOW-E COATING LAMINATED VENEER LUMBER MULLION LOW IRON OUTER PAN LOW-E COATING CAVITIES FILLED WITH INERT GAS (ARGON) WARM EDGES SPACE BARS EDGE SEALS CARPET 1/4" ACOUSTICAL UNDERLAYMENT 4" THREE-LAYER CLT PANEL 1/2" PLYWOOD (TWO PLY) 4" THREE-LAYER CLT PANEL 6 1/2" FIVE-LAYER CLT PANEL 4" THREE-LAYER CLT PANEL 6 1/2" FIVE-LAYER CLT PANEL 3" RIGID GLASS FIBER INSULATION BOARD ROOFING PAVER ASSEMBLY CONCRETE FOOTING SIDEWALK CLT WOOD AND GLASS CURTAIN WALL SYSTEM CONCRETE FLOOR ABOVE 3" RIGID INSULATION ON COMPACTED GRAVEL FILL 3" RIGID GLASS FIBER INSULATION BOARD
Section A Scale 1/2” = 1’- 0” TRIPLE GLAZED THERMALLY - BROKEN CURTAIN WALL WITH ARGON FILLING AND LOW-E COATING LAMINATED VENEER LUMBER MULLION LOW IRON OUTER PAN LOW-E COATING CAVITIES FILLED WITH INERT GAS (ARGON) WARM EDGES SPACE BARS EDGE SEALS CURTAIN WALL SYSTEM C-301.00 Code Requirements for Climate Zones 6 Ceiling R-Value = 49 Wood Frame Wall R-Value = 20 Fenestration and Skylight U-Factors = 0.35 Floor R-Value = 30 Basement Wall, Slab and Crawlspace R-Values = 15 1C
Section B Scale 1/2” = 1’- 0” Slate Roofing paver assembly 3” Rigid glass fiber insulation board 4” Three layared CLT panel 6 1/2” Five layared CLT panel 25 15.00 01.25 x 4 01.25 x 6.5 = 25.00 = 15.00 = 05.00 = 08.125 R-VALUE TOTAL R-VALUE = 53.395 Glazed panel Inert Gas Low E-coating / HS2-C180 Laminated veneer lumber mullion 07.00 08.314 05.433 01.25 x 8.5 = 07.00 = 08.314 = 05.433 = 10.625 R-VALUE TOTAL R-VALUE = 31.372 https://basc.pnnl.gov/images/iecc-climate-zone-map
COURSE: SP22_TSM2006
ISLAM
Roof
Wall
MASTER OF ARCHITECTURE COURSE:
DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED AND LOW-E COATING LAMINATED VENEER LUMBER MULLION LOW IRON OUTER PAN CAVITIES FILLED WITH INERT GAS (ARGON) WARM EDGES SPACE BARS CARPET 1/4" ACOUSTICAL UNDERLAYMENT 4" THREE-LAYER CLT PANEL 1/2" PLYWOOD (TWO PLY) 4" THREE-LAYER CLT PANEL 6 1/2" FIVE-LAYER CLT PANEL 4" THREE-LAYER CLT PANEL 6 1/2" FIVE-LAYER CLT PANEL 3" RIGID GLASS FIBER INSULATION BOARD CONCRETE FOOTING SIDEWALK CLT WOOD AND GLASS CURTAIN WALL SYSTEM CONCRETE FLOOR ABOVE 3" RIGID INSULATION ON COMPACTED GRAVEL FILL 3" RIGID GLASS FIBER INSULATION BOARD
Section C Scale 1/2” = 1’- 0” TRIPLE GLAZED THERMALLY - BROKEN CURTAIN WALL WITH ARGON FILLING AND LOW-E COATING LAMINATED VENEER LUMBER MULLION LOW IRON OUTER PAN LOW-E COATING CAVITIES FILLED WITH INERT GAS (ARGON) WARM EDGES SPACE BARS EDGE SEALS CONCRETE FOOTING SIDEWALK CLT WOOD AND GLASS CURTAIN WALL SYSTEM CONCRETE FLOOR ABOVE 3" RIGID INSULATION ON COMPACTED GRAVEL FILL CURTAIN WALL SYSTEM C-302.00 Code Requirements for Climate Zones 6 Ceiling R-Value = 49 Wood Frame Wall R-Value = 20 Fenestration and Skylight U-Factors = 0.35 Floor R-Value = 30 Basement Wall, Slab and Crawlspace R-Values = 15 1C Foundation Section D Scale 1/2” = 1’- 0” 4” Three layared CLT panel 1/2” Plywood (2) 3” Rigid glass fiber insulation board 4” Three layared CLT panel 6 1/2” Five layared CLT panel 01.25 x 4 01.25 x 1 15.00 01.25 x 4 01.25 x 6.5 = 05.00 = 01.25 = 15.00 = 05.00 = 08.125 R-VALUE TOTAL R-VALUE = 34.375 12” Concrete flooring 3” Rigid glass fiber insulation board Gravel fill 02.025 15.00 00.08 x 24 = 02.025 = 15.00 = 01.92 R-VALUE TOTAL R-VALUE = 18.945 https://basc.pnnl.gov/images/iecc-climate-zone-map
SP22_TSM2006
Floor
ASSIGNMENT ONE (D) – CASE STUDY FORENSICS
Using Assignment One (C) as a launching point, utilize the wall section as a base drawing to call out specific details described below. Draw a plan detail and three section details at a scale of 1-1/2” = 1’-0”. Select location of details with instructor, making sure to show the most useful information about the systems and components, while minimizing redundant information. Some speculation may be necessary, so back up your descriptions by providing technically appropriate explanations.
MASTER OF ARCHITECTURE
COURSE: SP22_TSM2006
DETAILING AND CONSTRUCTION DOCUMENTS
INSTRUCTOR: MARY POLITES HELALUL ISLAM
DATE: 05/16/2022
SCALE: AS NOTED
D-400.00 1D
MASTER OF ARCHITECTURE INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED 4" THREE-LAYER CLT PANEL 6 1/2" FIVE-LAYER CLT PANEL 3" RIGID GLASS FIBER INSULATION BOARD ROOFING PAVER ASSEMBLY TRIPLE GLAZED THERMALLY - BROKEN CURTAIN WALL WITH ARGON FILLING AND LOW-E COATING LAMINATED VENEER LUMBER MULLION ALUMINUM CURTAIN WALL VENEER FRAMING GLULAM BEAM DIMENSIONS VARY METAL PANEL CAP PARAPET WITH FLASHING WARM EDGE SPACE BARS AND SEALANT CURTAIN WALL SYSTEM D-401.00 1D Section Detail - Wall to Roof Scale 1 1/2” = 1’- 0”
MASTER OF ARCHITECTURE INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED CURTAIN WALL SYSTEM D-402.00 1D Section Detail - Floor to Wall Scale 1 1/2” = 1’- 0” CARPET 1/4" ACOUSTICAL UNDERLAYMENT 4" THREE-LAYER CLT PANEL 1/2" PLYWOOD (TWO PLY) 1" SEMI-RIGID GLASS FIBER INSULATION BOARD (TWO-PLY) 4" THREE-LAYER CLT PANEL 6 1/2" FIVE-LAYER CLT PANEL LAMINATED VENEER LUMBER MULLION GLULAM BEAM DIMENSIONS VARY ALUMINUM CURTAIN WALL VENEER FRAMING TRIPLE GLAZED THERMALLY - BROKEN CURTAIN WALL WITH ARGON FILLING AND LOW-E COATING WARM EDGE SPACE BARS AND SEALANT MECHANICAL UNIT
MASTER OF ARCHITECTURE
MARY
DATE:
SCALE: AS NOTED CURTAIN WALL SYSTEM D-403.00 1D Section Detail - At Window Jab Scale 1 1/2” = 1’- 0” LEVELING FRAMING BACKUP
GLAZED THERMALLY - BROKEN CURTAIN WALL WITH ARGON FILLING AND LOW-E COATING ALUMINUM CURTAIN WALL VENEER FRAMING 18 MM WOOD PANEL 18 MM OSB INTERIOR AIR SEAL AT JOINTS
TRANSITION STRIP ABB/WRB/ ATTACHED WITH SILICONE TO CURTAIN AND WALL MEMBRANE CHARRED FIRE-TREATED CEDAR CLADDING 30 MM PLYWOOD BACK UP 13MM AND CLEAT SYSTEM OVER DRAINED AND VENTILATED RAIN SCREEN CAVITY SILICONE APPLIED LIQUID AR/WRB SIP POLYSTYRENE FOAM 140 MM
INSTRUCTOR:
POLITES HELALUL ISLAM
05/16/2022
TRIPLE
SILICONE
MASTER OF ARCHITECTURE
SCALE:
CURTAIN WALL SYSTEM D-404.00 1D Section Detail - At Foundation Footing Scale 1 1/2” = 1’- 0”
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
AS NOTED
SEMI POLISHED FINISH CAST- IN PLACE CONCRETE SLAB CONCRETE FLOOR ABOVE 3" RIGID INSULATION ON COMPACTED GRAVEL FILL VAPOR BARRIER VAPOR BARRIER RE-INFORCED CONCRETE SPREAD FOOTING RE-INFORCED CONCRETE MECHANICAL KEY CONNECTION COMPRESSED EARTH
OF ARCHITECTURE
DETAILING AND CONSTRUCTION DOCUMENTS
SCALE:
ROOF SYSTEM 08 60 00 SKYLIGHT WITH DOUBLE GLAZE INSULATED PANELS 05 10 00 PRATT TRUSS SUPPORT FOR ROOF 05 60 00 DRAINAGE LINE AND GUTTER 07 10 00 WATER PROOFING 05 10 00 HSS BEAM ATTACHED TO POST 05 40 00 TRANSOM / MULLION WALL SYSTEM 05 40 00 TRANSOM / MULLION 08 90 00 DOUBLE GLAZE INSULATED GLASS PANELS 05 50 00 BASE CAP FOUNDATION SYSTEM 07 10 00 WATERPROOF MEMBRANE 07 20 00 RIGID INSULATION 02 40 00 CONCRETE FOUNDATION FLOOR SYSTEM 09 60 00 WOOD FINISH FLOORING 03 40 00 PRE-CAST CONCRETE SLAB A-100.00 2A
One
launching
case
if your case study was
load-bearing
load-bearing
ASSIGNMENT TWO (A) – TRANSFORMATION CSI 16 Divisions Specification
MASTER
COURSE: SP22_TSM2006
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
AS NOTED
Using Assignment
as a
point, choose one
study to Transform into a different assembly system. For example,
a
brick wall system, consider changing it to a curtain wall system with brick panels. Alternatively, a
brick wall system can be transformed to a concrete post and beam system with brick in-fill
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL
DATE: 05/16/2022 SCALE: AS NOTED CURTAIN WALL SYSTEM A-101.00 2A Vacation Cottages - Precedent Vacation Cottage - Curtain Wall Section Scale: 3/4” = 1’- 0” OUTSIDE RIGID INSULATION BASE CAP BASE TRANSOM DOUBLE GLAZE INSULATED GLASS PANELS WOOD FINISH FLOORING ABOVE WATERPROOF MEMBRANE CURTAIN WALL TRANSOM CURTAIN WALL MULLION DOUBLE GLAZE INSULATED GLASS PANELS 6'-0" TOP TRANSOM WATER PROOF MATERIAL DRAINAGE LINE AND GUTTER HSS BEAM ATTACHED TO POST PRATT TRUSS SUPPORT FOR ROOF SKYLIGHT WITH DOUBLE GLAZE INSULATED PANELS 2.4 7.2 7.1 5.5 5.4 8.9 9.6 5.4 5.4 8.9 5.1 7.1 5.6 5.1 8.6 5.4 3.4 B 201 B 202 CONCRETE SLAB CONCRETE FOOTING OUTSIDE DOUBLE GLAZE INSULATED GLASS PANELS WOOD FINISH FLOORING ABOVE CURTAIN WALL TRANSOM CURTAIN WALL MULLION DOUBLE GLAZE INSULATED GLASS PANELS 6'-0" TOP TRANSOM WATER PROOF MATERIAL DRAINAGE LINE AND
HSS
ATTACHED
POST PRATT TRUSS SUPPORT
SKYLIGHT WITH DOUBLE GLAZE INSULATED PANELS 8.9 9.6 5.4 5.4 8.9 5.1 7.1 5.6 5.1 8.6 5.4 3.4 B 201 B CONCRETE SLAB
ISLAM
GUTTER
BEAM
TO
FOR ROOF
MASTER OF ARCHITECTURE COURSE:
DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL
DATE:
SCALE: AS NOTED CURTAIN WALL SYSTEM A-102.00 2A Vacation Cottage - Curtain Wall Floor Section Scale: 3/4” = 1’- 0” INSIDE OUTSIDE 9.6 3.4 5.4 8.9 5.1 5.5 B 203 CURTAIN WALL MULLION WOOD FINISH FLOORING ABOVE CONCRETE SLAB DOUBLE GLAZE INSULATED GLASS PANELS CORNER CAP PIECE HSS BEAM ATTACHED TO COLUMNS
SP22_TSM2006
ISLAM
05/16/2022
MASTER OF ARCHITECTURE COURSE:
DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED Vacation Cottage - Curtain Wall Elevation Scale: 3/4” = 1’- 0” CURTAIN WALL SYSTEM A-103.00 2A DOUBLE GLAZE INSULATED BASE CAP BASE TRANSOM DOUBLE GLAZE INSULATED GLASS PANELS CURTAIN WALL TRANSOM CURTAIN WALL MULLION DOUBLE GLAZE INSULATED GLASS PANELS TOP TRANSOM 5.5 5.4 8.9 5.4 5.4 8.9 5.4
SP22_TSM2006
ASSIGNMENT TWO (B) – TRANSFORMATION
Using wall Section from Assignment Two (A), call out 4 connection details to further explore in greater detail at a scale of 1-1/2” = 1’-0”. Select location of details with instructor, making sure to show the most useful information about the systems and components, while minimizing redundant information. Make sure to back up you details with technically accurate drawings, annotations and descriptive.
MASTER OF ARCHITECTURE
COURSE: SP22_TSM2006
DETAILING AND CONSTRUCTION DOCUMENTS
INSTRUCTOR: MARY POLITES HELALUL ISLAM
DATE: 05/16/2022
SCALE: AS NOTED
B-200.00 2B
SKYLIGHT ASSEMBLY WITH DOUBLE GLAZE INSULATED PANELS AND GALVANIZED ALUMINUM FRAMING
WOOD PRATT TRUSS SYSTEM ASSEMBLY AT ROOF ANCHORED TO HSS TUBE AT COLUMNS. PRESSURE TREATED
DRAINAGE LINE AND GUTTER
WATER PROOF MATERIAL
RIBBED METAL CLADDING ALUMINUM: GALVANIZED BLOCKING AS REQ.
HSS BEAM WITH INSULATION HSS 6 x 6 x 3/8" ANCHORED COLUMN
TOP TRANSOM PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED
DOUBLE GLAZE INSULATED GLASS PANELS PART OF CURTAIN WALL ASSEMBLY
SP22_TSM2006
INSTRUCTOR: MARY POLITES HELALUL ISLAM
DATE: 05/16/2022
MASTER OF ARCHITECTURE
COURSE:
DETAILING AND CONSTRUCTION DOCUMENTS
SCALE:
CURTAIN WALL SYSTEM B-201.00 2B Scale: 1 1/2” = 1’- 0” Section Detail - Wall to Roof 10" 6" 2" 1 3/4" 7" 4 3/4" 6" 5 3/4"
AS NOTED
CEILING CAVITY FOR MECHANICAL SYSTEM
WOOD FINISH FLOORING ABOVE FLOOR MAT/ LEVELING OVER CONCRETE SLAB
CURTAIN WALL MULLION PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED
DOUBLE GLAZE INSULATED GLASS PANELS PART OF CURTAIN WALL ASSEMBLY
BASE TRANSOM PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED
HARD WOOD BASE WITH BLOCKING
4"
7"
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
BOARD ON PLYWOOD BACKING
3" INSULATION
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS
SCALE:
CURTAIN WALL SYSTEM B-202.00 2B Scale: 1 1/2” = 1’- 0” Section Detail - Floor to Wall
6" 5 1/2" 1 1/2"
AS NOTED
10" 6" 2" 1 3/4"
CONCRETE FLOOR SLAB LIGHTWEIGHT / PRECAST ONE LAYER GYP.
RIGID INSULATION OVER FOUNDATION WITH VAPOR BARRIER
CONCRETE FOUNDATION
CORNER MULLION
PART OF CURTAIN WALL ASSEMBLY CAPPING OVER STRUCTURAL POST. HOUSING INSULATION.
BLOCKING AS REQ.
HSS STRUCTURAL COLUMN HSS 6 x 6 x 3/8" ANCHORED TO FOUNDATION
CURTAIN WALL MULLION PART OF CURTAIN WALL ASSEMBLY
DOUBLE GLAZE INSULATED GLASS PANELS PART OF CURTAIN WALL ASSEMBLY
CURTAIN WALL MULLION PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
DOUBLE GLAZE INSULATED GLASS PANELS PART OF CURTAIN WALL ASSEMBLY
WOOD FLOORING PERIMETER WOOD FLOORING LARGER SIZE: MITER CUT AT ALL CORNERS
WOOD FLOORING FINISHED AND SEALED 2" x 6" FLOORING
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS
CURTAIN WALL SYSTEM B-203.00 2B Scale: 1 1/2” = 1’- 0” Section Detail - Window Jamb
SCALE: AS NOTED
OUTSIDE 3'-11" 4 1/2" 10" 3'-8" 4 3/4" 6" 2" 1 3/4" 10" 1 1/2" 2" 6"
OF ARCHITECTURE
DETAILING AND
DOCUMENTS
SCALE: AS
CURTAIN WALL SYSTEM B-204.00 2B Scale: 1 1/2” = 1’- 0” Section Detail - Wall to Partition OUTSIDE
6"
6" 7"
FINISHED
INSULATION
STUDS
MASTER
COURSE: SP22_TSM2006
CONSTRUCTION
INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022
NOTED
10" 6" 2" 1 3/4"
6" 6"
CURTAIN WALL MULLION PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED DOUBLE GLAZE INSULATED GLASS PANELS PART OF CURTAIN WALL ASSEMBLY WOOD FLOORING
AND SEALED 2" x 6" FLOORING TWO LAYERS OF GYP. BOARD ON EACH SIDE PART OF PARTITION WALL ASSEMBLY DOUBLE GLAZE INSULATED GLASS PANELS PART OF CURTAIN WALL ASSEMBLY HSS STRUCTURAL COLUMN HSS 6 x 6 x 3/8" ANCHORED TO FOUNDATION BLOCKING AS REQ. FIBER GLASS
IN BETWEEN METAL
METAL STUDS 18" O.C.
MASTER OF ARCHITECTURE
COURSE: SP22_TSM2006
ASSIGNMENT TWO (C) – TRANSFORMATION
Using Assignment Two (A) and (B) as a launching point, develop 2 axonometric wall sections, one showing the interior plane and the other showing the exterior. These should illustrate the various materials, components, and connections, as well as their relationships from interior to exterior. Select location and view angle of each detail with instructor, making sure to show the most useful information about the systems and components, while minimizing redundant information. Make sure to back up your details with technically accrate drawings, annotations, and descriptive explanations.
DETAILING AND CONSTRUCTION DOCUMENTS
INSTRUCTOR: MARY POLITES HELALUL ISLAM
DATE: 05/16/2022
SCALE: AS NOTED
C-300.00 2C
MASTER OF ARCHITECTURE COURSE:
DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL
DATE: 05/16/2022 SCALE: AS NOTED 08 60 00 DOUBLE GLAZE INSULATED GLASS PANELS PART OF CURTAIN WALL ASSEMBLY CURTIAN WALL TRANSOM PART OF CURTAIN WALL ASSEMBLY ALUMINUM:
DRAINAGE LINE AND GUTTER SKYLIGHT ASSEMBLY WITH DOUBLE GLAZE INSULATED PANELS AND GALVANIZED ALUMINUM FRAMING RIBBED WOOD CLADDING BLOCKING AS REQ. 05 60 00 05 40 00 HSS BEAM WITH INSULATION HSS 6 x 6 x 3/8" ANCHORED COL. 05 10 00 05 40 00 08 90 00 ONE LAYER GYP. BOARD ON PLYWOOD BACKING 3" INSULATION RIGID INSULATION OVER FOUNDATION WITH VAPOR BARRIER
TRANSOM
WALL MULLION
CONCRETE FLOOR SLAB LIGHTWEIGHT / PRECAST CEILING CAVITY FOR MECHANICAL SYSTEM WOOD FINISH FLOORING ABOVE FLOOR MAT/ LEVELING OVER CONCRETE SLAB 05 40 00 05 40 00 07 20 00 CONCRETE FOUNDATION 02 40 00 09 60 00 03 40 00 09 20 00 07 20 00 CURTAIN WALL SYSTEM C-301.00 2C Scale: 1/2” = 1’- 0” Axonometric Wall Section Detail - Exterior
SP22_TSM2006
ISLAM
GALVANIZED
BASE
PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED CURTAIN
PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED
MASTER OF ARCHITECTURE COURSE: SP22_TSM2006 DETAILING AND CONSTRUCTION DOCUMENTS INSTRUCTOR: MARY POLITES HELALUL ISLAM DATE: 05/16/2022 SCALE: AS NOTED 08 60 00 DOUBLE GLAZE INSULATED GLASS PANELS PART OF CURTAIN WALL ASSEMBLY CURTIAN WALL TRANSOM PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED WOOD PRATT TRUSS SYSTEM ASSEMBLY AT ROOF ANCHORED TO HSS TUBE AT COLUMNS. PRESSURE TREATED SKYLIGHT ASSEMBLY WITH DOUBLE GLAZE INSULATED PANELS AND GALVANIZED ALUMINUM FRAMING 05 10 00 HSS BEAM WITH INSULATION HSS 6 x 6 x 3/8" ANCHORED COL. 05 10 00 05 40 00 08 90 00 ONE LAYER GYP. BOARD ON PLYWOOD BACKING 3" INSULATION RIGID INSULATION OVER FOUNDATION WITH VAPOR BARRIER BASE TRANSOM PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED CURTAIN WALL MULLION PART OF CURTAIN WALL ASSEMBLY ALUMINUM: GALVANIZED CONCRETE FLOOR SLAB LIGHTWEIGHT / PRECAST WOOD FINISH FLOORING ABOVE FLOOR MAT/ LEVELING OVER CONCRETE SLAB 05 40 00 05 40 00 07 20 00 CONCRETE FOUNDATION 02 40 00 09 60 00 03 40 00 09 20 00 07 20 00 CURTAIN WALL SYSTEM C-302.00 2C Scale: 1/2” = 1’- 0” Axonometric Wall Section Detail - Interior
- Fernanda Castro. “Vacation Cottage / PK Arkitektar.” ArchDaily. ArchDaily. December 15, 2015. <http://www.archdaily.com/778709/vacation-cottages-pk-arkitektar https://issuu.com/detail-magazine/docs/bk_dee-2016-6_roofs_issn1614-4600
CLYFFORD STILL MUSEUM - ALLIED WORKS ARCHITECTURE
- Ross, Kritiana. “Clyffors Still Museum / Allied Works Architecure.” ArchDaily. ArchDaily. January 31, 2012. <http://www.archdaily.com/203388/clyfford-still-museum-allied-works-architecture-2 http://www.alliedworks.com/projects/clyfford-still-museum/
- Brad Cloepfil “Clyffors Still Museum / Allied Works Architecure.” Archilovers. Archilovers. July 25, 2008. < https://www.archilovers.com/projects/9802/clyfford-still-museum.html#images
MASTER OF ARCHITECTURE
COURSE: SP22_TSM2006
WOOD
INNOVATION DESIGN
