MD Charlton Catalog by MD Charlton

INDEX A

Gould & Goodrich........................ 238

Blackhawk................................... 151

Otis .......................................... 289

Damascus ....................................113 Hatch ....................................117-118

Blackhawk................................... 135

Clipboards.....................................20 Clothing

Belt Keepers ............................ 136

BlackHawk ........................... 157-167

Gould & Goodrich........................ 225

MDC Clothing....................... 201-207

MDC Nylon.................................. 219

Aerosol Projectors .................... 110 Alcohol Detectors .....................328 Ammunition Holders Blackhawk........................... 134, 144 Gould & Goodrich........................ 234 MDC Nylon.......................... 221, 223

Armour Bag ................................191 Armour Plates P.A.C.A................................. 187-188 Point Blank.......................... 195, 199

ASP Batons........................................... 39 Flashlights..................................... 48 Handcuffs ...................................... 44 Training Equipment ....................... 81

ASP Training by MD Charlton ............................. 84

Belts

Belt Keepers ............................ 237 Buckles .................................... 225

Traffic Apparel.......................... 327 Tru Spec............................... 208-214

Belt Keeper Straps .................. 216

Bike Patrol Gloves

Blackhawk........................... 143, 145 Damascus ....................................116 Hatch .......................................... 224 MDC Nylon Gear Bags................ 222 P.A.C.A........................................ 191 Point Blank.................................. 199

Balaclava Blackhawk................................... 150 Damascus ....................................116 Hatch ...........................................117

Ballistic Head Gear ...................128 Barricade Tape ...........................327 Batons AETCO.........................................111 ASP ............................................ 39 Baton Accessories End Cap....................................110 Gould & Goodrich Baton Holders.......................... 238

Baton Holders Blackhawk................................... 133

Coats BlackHawk .................................. 167

Damascus ................................... 246

MDC Clothing...................... 201, 206

Hatch .......................................... 258

Tru-Spec

Body Armour

BDU Coats............................... 209

P.A.C.A........................................ 189

Combat Apparel

P.A.C.A........................................ 193

Embroidery ...................................81 Emergency Mini Emergpak .............................. 15 MSA Gas Masks - Accessories .......... 14

Entry Tools BlackHawk ........................... 180-182 Tactical & Riot Equipment .... 130-131

Exothermic Cutting Torch .......129 Eye Protection Blackhawk................................... 151

Hard Armour Plates ................. 187

Blackhawk............................ 157-167

ESS ....................................... 35-37

K-9 Tactical .............................. 188

MDC Clothing....................... 201-207

Wiley X..................................... 33-34

Modular Pouches..................... 183

Tru-Spec ..................................... 208

Point Blank.................................. 194

Competition Targets .................291 Compressed Air Systems

Pro-Formance ............................. 200

FN Herstal................................... 295

Protective Body Gear ................ 85

Back Pack....................................222 Badge Holders ...................222, 237 Bags

Seam

MDC Nylon.................................. 216

Body Gear

Head Office: 1-866-652-2877

Crest .......................................... 288

Boots

Pepperball....................................112

Containment System

Blackhawk............................ 146-147

Ballistic Solutions ........................ 301

Original SWAT.......................... 10-13

CDC .......................................... 300

Brushes Firearms Cleaning Brushes......... 288

Buckles Gould & Goodrich........................ 225 MDC Nylon.................................. 216

D Day/Night Cameras ................... 311 Digital Video System

Digital Patroller............................ 352

Canine Straps ............................216 Caps Blackhawk................................... 168 Tru Spec...................................... 215

Carbide Lamp Kit ......................266 Cases ............................................22 Cellphone Holders Gould & Goodrich........................ 236 MDC Nylon.................................. 218

Chemical Munitions .................108 Chemical Projectiles ................107 Citation Books .............................20 Cleaning Brushes......................288 Cleaning Supplies

West: (604) 526-1631

Cutting Torch..............................129 Cycling Shorts ...........................IBC

Prairies: 1-866-652-2877

Duty Belts Blackhawk............................ 135-136 Gould & Goodrich........................ 225 MDC Nylon.................................. 216

Duty Gear BlackHawk ........................... 134-136 Gould & Goodrich................. 225-239 MDC Nylon........................... 216-223

E Ear Communication ..............28-31 Ear Protection .............................31 Elbow Pads

East: 1-877-993-9968

F Firearms FN Herstal Compressed Air Systems ........ 295 Pistols ...................................... 293 Submachine gun...................... 294 Glock Pistols ...................................... 296 Smith & Wesson Pistols ...................................... 293

Firearms Sights Carbide Lamp Kit ........................ 266 Laser Devices, Inc Laser Sights............................. 270 Tactical Lights .......................... 284 Meprolight Night Sights ............................. 267 Rec-T-Fire Laser Alignment Systems ........ 266

Firearm Accessories Ballistic Solutions Containment Systems ............. 301 Boonie Packer Safety Blocks........................... 299 Slings....................................... 299 CDC Containment System ............... 300

Crimson Trace Laser Grips .............................. 297 Hogue Grips ........................................ 298 JFS Speedfoam .............................. 300 Precision Gun Specialists Training Cartridges .................. 300 Tufloc Gun Locks ........................ 330-331

Firearm Cleaning Supplies Cleaning Brushes........................ 288 Crest .......................................... 288 Otis ................................... 289-290

Firearm Grips .............................298 Fire Fighting Coldfire / Firefreeze....................... 33

Flashers 100% Solid State Flashers ...... 339 Mechanical Flashers................ 340

Flashlights ASP ....................................... 48-50 Blackhawk................................... 152 Gould & Goodrich Flashlight Holders............. 238-239 ICE Light Intense Colour Emitter............... 51 Laser Devices ............................... 68 LED Logic Striker-VG.................................. 67 Rechargeable................................ 68 Streamlight............................... 52-67

Flash Terminators ..................... 311 Flight Gloves Damascus ................................... 249 Hatch .......................................... 253

Footwear Blackhawk............................ 146-147 Original SWAT.......................... 10-13

Damascus ............................ 240-249

Damascus ....................................116 Hatch .......................................... 224 MDC Nylon.................................. 222 Point Blank.................................. 199 ............................................81

Blackhawk ...................................168 Tru Spec ......................................215

Headgear

Gould & Goodrich

L Laser Aimer Modules ...............317 Laser Alignment Systems ......266 Laser Day/Night Technology

Glove Holders.......................... 232

Blackhawk ....................................150

Hatch ................................... 251-258

Damascus..................................... 116

B.E. Meyers................................. 314

MDC

Hatch .......................................... 117

Laser Grips .................................297 Laser Illuminator ................304-307 Laser Rangefinder (Night Vision)

Cut Resistant Gloves............... 250

MDC Clothing ...............................207

Glove Holder ......................217, 222 Golf Shirt .....................................207 Goggles

Headlamps ...............................64-65 Helmets

ESS ....................................... 35-37

P.A.C.A........................................ 193

Laser Sights .......................270-283 Latex Glove Case

RBR .......................................... 128

Blackhawk................................... 133

Wiley X..................................... 33-34

Goggles (Night Vision) Newcon Optik.............................. 315

Grips (Gun)

Maxpro ................................. 125-127

Holsters

Blackhawk................................... 178 Hogue ......................................... 298

Taser Holsters.......................... 229 MDC Nylon

Gun Cleaning Cleaning Brushes........................ 288

Thigh Holsters ......................... 221

Crest

Taser Holsters .................... 80, 221

Otis Cleaning Kits ........................... 298

Gun Grips Blackhawk................................... 178 Hogue ......................................... 298

Gun Locks ...........................330-331 Gun Racks ..................................330

Taser ................................. 70-71, 73

ASP ....................................... 44-47 Peerless ............................... 103-104 Smith & Wesson.......................... 102 Disposable Handcuffs Tuff-Tie....................................... 93 Restraints

Handcuff Holders

Taser Holsters................. 70-71, 73 Taser Training ............................... 80

Less Lethal Solutions Gas Guns .................................110

Lights Specialty Lights ................ 347-349

Instructor Certification Courses

Vehicle Lights ................... 332-338 Vehicle Light Accessories ........ 338

ASP Instructor Certification ........... 84

Adventure Lights .................. 259-265

Defense Technology

Alerte

Aerosol Projector, Chemical Muni-

Vehicle Lights .......................... 331 Eflare Safety Beacon ........................... 51

Handcuffs

Less Lethal

Able 2

tions, Distraction Devices . 105

Gould & Goodrich........................ 232

Taser ............................................ 69

Shoulder Holsters .................... 220

Cleaning Supplies.................... 288

Newcon Optik.............................. 318

MDC Nylon.................................. 217

BlackHawk ........................... 137-142 Gould & Goodrich................. 227-231

MDC Nylon ................................ 93

Gas Guns..................................... 110 Gas Masks................................. 14 Gear Bags

Hats

Blackhawk............................ 149-150

G&G Restraint Belt..................... 93

Gifts

Gloves

Federal Signal

Jackets .........................201, 206, 209 Jambs & Jamb Spreaders.......131

Specialty Lights ....................... 349 Strobe System ......................... 343 Vehicle Lights ................... 341-342 Vehicle Light Flashers ............. 343

ICE Light Intense Colour Emitter............... 51

Key Keepers .......................219, 236 K-9 Vest ........................................188 Knee Pads Blackhawk................................... 151

Laser Devices ............................... 68

Lockers Pistol Lockers................................ 21

Gould & Goodrich ....................... 233

Damascus .............................113-114

Hiatts ..................................... 99-101

Hatch ....................................117-118

MDC Nylon......................... 217, 223

P.A.C.A........................................ 193

Mag Holder

Handcuff Keys

Knives

Blackhawk................................... 134

ASP ............................................ 46

Blackhawk............................ 153-156

Hiatt .......................................... 101

Gerber........................................... 23

MDC Nylon.................................. 223

Peerless ...................................... 103

Leatherman................................... 27

Megaphone .................................132

Gould & Goodrich................. 234-235

Zak Tools..................................... 102

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Metal Detectors Garrett Ground Search Metal Detectors....16 Handheld Metal Detectors ......... 16 Walk-Thru Metal Detectors ........ 17 Torfino Enterprises

Pager Holders

Radio Audio

Gould & Goodrich

Ear Phone Connection............. 28-31

Pager Holders.......................... 236 MDC Nylon.......................... 218, 223

Handheld Metal Detector........... 18

Microphone

Pants Blackhawk.................... 158, 163-164 MDC Clothing........ 201-202, 204-205

VidMic ........................................... 32

Tru Spec............................... 208-211

Plates (Tactical)

Gould & Goodrich

P.A.C.A........................................ 188

Microphone Holders ................ 236 MDC Nylon.................................. 218

Mirrors Tactical Mirrors..................... 122-124

Motorcycle Gloves Damascus ................................... 246 Hatch .......................................... 258

N Night Sights ................................267 Night Vision Systems B.E. Meyers.......................... 292-314

Radio Holders Gould & Goodrich........................ 236

Ear Phone Connection.................. 30

Microphone Holders

VidMic ........................................... 32

Point Blank.................................. 195

Pistols

MDC Nylon.................................. 218

Rappel Gloves Damascus ................................... 248

Violent Prisoner Chair................ 95

FN Herstal................................... 293

Restraint Belt ............................. 93

Glock .......................................... 296

Bed Restraints ........................... 94

Smith & Wesson.......................... 293

Leather Cuff Restraints.............. 94

Hogue ......................................... 298

Nylon Restraints ........................ 93 The Grip ................................... 96-98

Able2 ................................... 350-351

The Wrap ...................................... 94

Federal Signal............................. 349

Locking Leather Restraints........ 94

Blackhawk................................... 178

Blackhawk............................ 160-161 MDC Clothing.............................. 207

Postal Gloves

Pouches

Restraint Jackets ....................... 94

Rifle Stock ...................................179 Riflescopes (Day/Night) ..........316 Riot Control Gloves

Roadside Alcohol Detectors

BlackHawk .......................... 134, 144

P.A.S. .......................................... 328

Gould & Goodrich........................ 232

Running Jacket ..........................165

MDC Nylon................... 217, 222-223

Prison Gloves

Night Vision Goggles ........ 315-316

Damascus ............................ 247-248

Riflescopes .............................. 316

Hatch .......................................... 251

Protective Body Gear

Evidence Notebooks.................. 20

Notebook Holders .....................222 NRA Targets ...............................291

O OC ...................................105-109 OC Holders ................................232 OC Spray Holders Gould & Goodrich ....................... 218 MDC Nylon.................................. 223

Odor Seal

Damascus .............................114-115 Hatch ................................... 119-120

Protective Gear

Optics/Electro Optics

Safety Beacon .............................51 Safety Blocks .............................229 Scabbards .....................................41 Shields Aetco .......................................... 132

T-shirts Blackhawk............................ 160-161 Clothing by MDC................. 201, 207 Tru-Spec Combat ............................ 213-214

Tactical & Riot Equipment Duty Aerosol ...................................106 Batons ............................................84 Aetco ...........................................111 ASP ............................................ 39 Baton Accessories Baton End Cap .........................110 BlackHawk

P.A.C.A........................................ 192

Entry Tools ........................ 180-182

Hatch ................................... 117-120

Shin Guards ................................ 118 Shirts

Holsters ............................ 137-142

Redman ................................... 85-88

Protective Gloves

Blackhawk............................ 159-162

Damascus ................................... 240 Hatch .......................................... 254

Protective Pads Damascus ....................................113 Redman ................................... 85-87

MDC Clothing...................... 201, 207

Shooting Gloves

West: (604) 526-1631

Crowd Management ................ 108 Chemical Projectiles.................... 109 Entry Tools ........................... 130-131

Hatch .......................................... 253

Exothermic Cutting Torch ............ 129

Shorts Clothing by MDC................. 201, 203 BDU Shorts.............................. 212

Prairies: 1-866-652-2877

Vests................................. 169-176 Chemical Munitions

Damascus ............................ 244-245

Tru-Spec

Meprolight ................................... 269

Head Office: 1-866-652-2877

Damascus .............................113-114

Hatch ...........................................118

Odor Suppressor........................... 38

For Vehicles............................. 330

Pole Camera ...............................121 Polo Shirts

Pistol Grip

Hatch .......................................... 251

Notebooks

Speedloader Holders ..............234 Storage Boxes Strobe System ...........................343 Submachine Gun ......................294 Sunglasses ...................................34 Sweaters ......................................206 Switch Boxes

Hatch .......................................... 255

Laser Rangefinder ................... 318

Federal Signal............................. 346 Speedfoam.................................. 300

Laser Day/Night Technology.... 314

Laser Aimer Modules............... 317

Able2 .......................................... 346

Rechargeable Flashlights .........68 Restraints

Damascus ............................ 247-248

Thermal Imaging Cameras.. 320-322

MDC Nylon.................................. 220

Sirens ............................... 344-345 Signal Lights .......................263-265 Slings ..................................... 299 Socks ..........................................148 Speakers

Speedloaders .............................221

Damascus ................................... 247

Newcon Optik

Gould & Goodrich........................ 228

Hatch .......................................... 252

Flash Terminators .....................311 L3 Communications

Shoulder Holsters

East: 1-877-993-9968

Jambs & Jamb Spreaders........... 131 Less Lethal Solutions Gas Guns .................................110 Megaphone ................................. 132

Compressed Air Systems FN Herstal ............................... 296 Pepperball ................................112 Pole Camera ............................. 121 Protective Gear Damascus..........................113-114 Hatch ................................ 119-120 Protective Head Gear Helmets Maxpro.............................. 125-127 P.A.C.A. ................................... 193 RBR ......................................... 128 Protective Pads Damascus.................................113 Hatch ........................................118 Ballistic Headgear ....................... 128 Shields Aetco ....................................... 132 P.A.C.A. ................................... 192 Shin Guards .................................118 Tactical Mirrors..................... 122-124 Tactical Vests Blackhawk ........................ 169-176 P.A.C.A. ............ 185-186, 188, 190 Point Blank ............... 194, 196-198 Wedges ....................................... 131

Tactical Apparel Blackhawk............................ 158-164 MDC Clothing....................... 201-207 Tru Spec............................... 208-215

Tactical Lights Adventure Lights .................. 259-265 Blackhawk................................... 152 Laser Devices ............................... 68 Streamlight............................... 59-61

Tactical Mirrors ...................122-124 Tactical Shirts

Thermal Imaging Cameras..320-322 Thigh Holsters ..........................221 Tire Blowout Protection .........326 Tire Deflators Warthog....................................... 248 PMG Roadblade ............................... 329 Tigertooth................................. 325

Traffic Equipment Whistles....................................... 329 Barricade Tape ............................ 327 Warthog Tire Deflator .................. 326 Roadside Alcohol Detector.......... 328 Traffic Slowers ............................ 323 Traffic Apparel ............................. 327 Tire Blowout Protection ............... 326

Traffic Safety Intense Colour Emitter................ 51

Traffic Slowers Crossing Guardian.......................323

Training & Equipment ASP Red Guns ............................. 82-83 Training Equipment.................... 81 MD Charlton ASP Training.............................. 84 Redman

Point Blank................... 194, 196-198

Targets ..................................291-292 Taser ............................................69 Gould & Goodrich Taser Holsters.......................... 229 MDC Nylon Taser Holsters.................... 80, 221 Taser Training ............................... 80

Speakers ................................. 346 Specialty Lights ....................... 349 Strobe System ......................... 343 Switch Boxes ........................... 349 Vehicle Lights ................... 341-343 Tufloc Gun Locks ........................ 330-331 Gun Racks............................... 330 Storage Boxes ......................... 330

Vehicle Lights Able 2 ................................... 332-338 Vehicle Light Accessories ........ 338 Alerte .......................................... 331

Vests BlackHawk ........................... 169-176 P.A.C.A................. 185-186, 188, 190 Point Blank................... 194, 196-198

Video System Digital Patroller............................ 352 VidMic ........................................... 32

Precision Gun Specialists ........... 300

Whistles .......................................329

Tactical & Riot Equipment ........... 131

Blackhawk.................... 158, 163-164 MDC Clothing........ 201-202, 204-205 Tru Spec............................... 208-211

Vehicle Accessories

P.A.C.A................. 185-186, 188, 190

Sirens ...................................... 345

Training Jacket (Running) ......165 Trousers

Training Cartridges

Tru Spec............................... 213-214 Blackhawk............................ 169-176

Light Flashers .......................... 343

Waterproof Jacket .....................167 Warthog (Tire Deflator) ...........326 Wedges

Protective Body Gear ........... 85-89

Tactical Vests

Federal Signal

Federal Signal...................... 341-343

Lights

MDC Clothing...................... 201, 207

Blackhawk............................ 159-162

Digital Video System ................... 352

Able 2 100% Solid State Flashers.. 339-340 Mechanical Flashers................ 340 Sirens ............................... 344-345 Speakers ................................. 346 Specialty Lights ................ 347-348 Switch Boxes .................... 350-351 Vehicle Lights ................... 332-338 Vehicle Light Accessories ........ 338 Alerte Vehicle Lights .......................... 331 Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

M.D. CHARLTON CO. LTD. History

“MD CHARLTON COMPANY is one of the largest law enforcement equipment distributors in Canada, incorporated in the provinces of British Columbia and Ontario, Canada. For over 30 years we have been providing our customers with quality equipment and honest, unexcelled service. To date, we employ over 50 staff and dealers across Canada; head office is located in beautiful Victoria, British Columbia, with a large warehouse, machine shop, and walk-in retail store. Other locations include a large retail store in Vancouver, British Columbia, a warehouse and walk-in retail store in Mississauga, Ontario, with authorized dealers in Quebec and the Maritimes. MD Charlton Company is also the Canadian warranty service & repair depot for GLOCK, SMITH & WESSON, STREAMLIGHT, COLDFIRE, & TASER INTERNATIONAL and other products. In addition to our day-to-day sales and servicing we are the TRAINING ACADEMY FOR CANADA offering courses in firearms safety programs, BAE SYSTEMS chemical munitions, distraction devices specialty impact, and crowd management, TASER INTERNATIONAL department and instructor training, and ASP tactical baton instructor certification. In January 2008, negotiations were concluded to acquire one of Canada's garment suppliers, located in Mississauga, Ontario. The purchase represented an opportunity for MD Charlton to solidify an important component in its product supply mix and open new opportunities by offering customized high quality products, backed by the service of Canadian manufacturing. The new company division operates under the business name of MDC Tactical Clothing Inc. We offer Safety Equipment, Footwear, Clothing, and Flashlights to the public at wholesale prices. Please visit us online at www.mdcharlton.ca We thank you in advance for your business. Sincerely,

Alec W. Rossa President • Full custom shop, custom tuning, revolver and pistol conversions • Individually factory trained gunsmiths • Fast and reliable turn around time • Canada's oldest and largest S&W warranty centre • On-site servicing of departmental firearms Many years of solid and practical experience, resulting in MDC's proven dependability and commitment to the satisfaction of our customers. NEW AND USED FIREARMS NOW AVAILABLE AT SPECIAL PRICES!

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

M.D. CHARLTON CO. LTD. Disclaimer of Liability

FROM M.D. CHARLTON CO. LTD. IMPORTANT PRODUCT INFORMATION & DISCLAIMER OF LIABILITY All firearms are potentially dangerous and may cause great harm, personal injury or death. No person should handle any firearm unless such person has successfully passed an accredited firearms safety course. Firearms should be stored, transported and used with great care. Such care also should be used in placing firearms into or removing firearms from your holster. Your holster should only be used with the specific firearm (frame and barrel size) for which it was designed. Neither your firearm nor your holster should be modified in any way. All holsters are designed for stock factory revolvers only. Do not use: trigger shoes, target triggers, grip adapters or any other articles interfering with the safe operation of your holster. Alteration of your holster or your weapon increases the chance for accidental discharge. Be certain that your firearm is securely seated in the holster before use. To avoid accidental discharge, a shoulder holster should be removed and pointed in a safe position before a firearm is inserted. A firearm should be held in place by hand during vigorous physical activity to avoid the firearm falling from the holster. For maximum security, holster safety straps must be used, when provided. Should your holster become worn, loose, defective, or ill-fitting at any time, cease use immediately. "ALL PRODUCTS ARE SOLD AS IS WITH ALL FAULTS." THE ENTIRE RISK AS TO QUALITY IS WITH THE BUYER!!! Should products prove defective following purchase, the buyer and not the manufacturer, distributor or retailer assumes the entire risk of all necessary servicing or repair. The implied warranties of merchantability and fitness for a particular purpose and any other warranties, express or implied, are excluded from this transaction and shall not apply to the product sold. THE DETERMINATION OF THE FITNESS OF THE SUITABILITY OF ANY PRODUCT FOR A SPECIFIC USE IS THE RESPONSIBILITY OF THE BUYER. M.D. CHARLTON CO. LTD. DOES NOT ACCEPT ANY LIABILITY ARISING FROM THE MISUSE OF ANY PRODUCT, INCLUDING THOSE SOLD TO LAW ENFORCEMENT AGENCIES. Law Enforcement Departments must assume the responsibility and risk of ensuring that all individuals using such equipment are properly trained in its use and safety.

PLEASE NOTE: Not all products in this catalogue are available for general distribution. Due to the unique security nature of many of our products, M.D. Charlton Co. Ltd. reserves the right to restrict sales at our discretion.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

M.D. CHARLTON CO. LTD. Ordering Information

CREDIT TERMS: All accounts are prepaid by VISA, Mastercard, or by cheque. Where insufficient funds are enclosed with order, shipment will be held for full payment. Any overpayment will be refunded with order. BACK ORDERS: Where custom leather or non-stocked items are requested, please expect a delay of 4 to 6 weeks. Many orders are shipped in 2 to 4 weeks. We also require a 50% non-refundable deposit on all custom leather and some special order items. SPLIT SHIPMENTS: Unless you specifically request that your entire order be shipped at one time, we will ship from stock first and then weekly as special orders come in from the manufacturers. TARGET PURCHASES: Large 'Silhouette' targets are available in quantities of 250 and must be shipped by Loomis Ground because of the weight and size of package. Canpar does not ship to the East from Victoria. SMITH & WESSON WARRANTY: Smith & Wesson requires proof of purchase for all warranty repairs. When shipping a firearm on behalf of a customer please enclose a copy of the bill of sale. (Customer is responsible for shipping to the Repair Centre only - return shipping is covered under warranty). All firearms must be carefully packaged to prevent shifting within the package. Please ship firearms to our Brentwood Bay P.O. Box address by Loomis Courier ONLY. Carefully unload all firearms before shipping and send explanatory notes where clarification is required.

FIREARM REPAIRS AND CHARLTON CUSTOM REVOLVERS: All firearms requests and repairs must be directed to our Brentwood Bay P.O. Box address or to our phone/fax numbers in Western Canada. If you have not already done so, please be sure to send us copies of your permits for our files. PRICES AND SALES TAX: Prices are subject to change without notice. Please note that on quoted pricing, Provincial Sales Tax and G.S.T. are extra. Provincial sales tax will be charged on your invoice unless a P.S.T. Exempt Number is on our files. Prices do not include shipping and handling. RETURNS: No returns for custom leather orders. Our authorization must precede all returns. Please package carefully, and insure fully with the carrier. Where shipping charges are the responsibility of M.D. Charlton Co. Ltd., we reserve the right to specify the carrier. A 15% restocking charge will apply to all goods returned after 30 days. Freight prepaid. FRENCH LANGUAGE ORDERS

To place orders in French, please contact MD Charlton Head Office and ask for Magdy Rafla. Pour passer des commandes en français, s’il vous plaît entrez en contact avec l’Office principal de MD Charlton et demandez Magdy Rafla. N.B.: Possession of this catalogue does not necessarily constitute the right to purchase. M.D. Charlton. Co. Ltd. reserves the right to refuse to sell to any individual or company without explanation or notice.

How to contact us VISIT US ON-LINE ...at: www.mdcharlton.ca, where you can browse our entire line of merchandise or even purchase, securely, through our web store. This site is registered with VERISIGN and protects information through standard encryption features, and also utilizes several additional unpublished security features. CD CATALOGUES Upon request, we will send you a copy of our current catalogue on CD. PRINTED CATALOGUES Upon request, we will provide your Department or contacts with printed copies of our current catalogue.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

HEAD OFFICE MAILING ADDRESS

Box 153, Brentwood Bay, B.C. V8M 1R3 HEAD OFFICE WALK-IN AND COURIER

6825 Veyaness Rd., Victoria, BC V8M 2A7 ON-LINE PURCHASES

sales@mdcharlton.ca www.mdcharlton.ca PHONE PURCHASES, DEPARTMENTAL OR PERSONAL

Toll Free: 1-866-652-2877 Phone: (250) 652-5266 Fax: (250) 652-4700

East: 1-877-993-9968

M.D. CHARLTON CO. LTD.

• From the Swartz Bay Ferry Terminal, follow the main highway. Turn right at Island View Rd., left onto Saanich Cross Rd., left onto Central Saanich Rd., right onto Keating Cross Rd., and right on Veyaness Rd. We are located at 6825 Veyaness Rd.

• From Victoria, take Blanshard St. / Pat Bay Highway. Follow the signs that lead to Butchart Gardens; turn left at Keating Cross Rd. and right at Veyaness Rd. Alternatively, take West Saanich Rd. from Royal Oak, and turn right onto Keating Cross Rd. and left onto Veyaness Rd. Store Hours: Monday - Friday: 8:00 AM - 4:30 PM

MAILING ADDRESS: Box 153 Brentwood Bay, B.C. V8M 1R3 STREET ADDRESS: 6825 Veyaness Rd. Victoria, B.C. V8M 2A7 Phone: (250) 652-5266 Fax: (250) 652-4700 Email: sales@mdcharlton.ca Online: www.mdcharlton.ca Toll Free: 1-866-652-2877

PRAIRIES - ALBERTA, SASKATCHEWAN, MANITOBA Phone: (306) 549-4602 Fax: (306) 549-4663 E-mail: ron@mdcharlton.ca

Toll-Free: 1-866-652-2877

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

M.D. CHARLTON CO. LTD. Contact us WESTERN CANADA - BC MAINLAND, YUKON, NORTH WEST TERRITORIES DIRECTIONS

From Hwy #1 take the Brunette Ave. South exit. This will put you on the Brunette overpass heading into New Westminster. Follow Brunette Ave. until it intersects with East Columbia St. Turn left onto East Columbia St. and follow it past McBride Blvd. until it becomes Columbia St. We are at 349 Columbia St. and 4th St. The store was established to cater to individual peace officer retail sales only - departmental purchases (requiring a P.O.) must be processed through our head office in Victoria. STORE HOURS: Monday - Saturday: 9:00 AM - 5:00 PM

349 Columbia St., New Westminster, B.C. V3L 5T6 Phone: (604) 526-6382 Fax: (604) 526-3217 E-mail: grant@mdcharlton.ca

ONTARIO & EASTERN CANADA DIRECTIONS

We are located near the intersection of Dixie and Eglington. Eastgate Parkway is one block East of Dixie off Eglington. Travelling West on the 401, take the Dixie Rd Exit South approx 1.5 km is Eglington turn left (East) two traffic lights is Eastgate pkwy. We are the second building on the right. STORE HOURS: Monday - Friday: 8:00 AM - 5:30 PM

Unit 3, 4580 Eastgate Parkway, Mississauga, ON L4W 4K4 Phone: (905) 625-9846 Fax: (905) 625-3538 Email: joe@mdcharlton.ca Toll Free: 1-877-993-9968 Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FOOTWEAR Footwear by ORIGINAL SWAT

CLASSIC 9’’ BLACK

Athletic Fit, Lightweight, Leather, Fabric Boot designed for Law Enforcement Professionals. SPECIFICATIONS - Full Grain Leather Toe - 1000 Denier Nylon - Triple Stitched Upper - Stitched Outsole - Self-Cleaning, Multi-Tred Carbon Rubber, Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Footbed - Moisture Wicking Lining - Rust Proof Hardware 1150 - Regular Width (D) 7 - 11.5, 12, 13, 14, 15 1150W - Wide Width (EEE) 8 -11.5, 12, 13, 14, 15 Weight 42 oz./pr (Size 9)

CLASSIC 9’’ TAN 1150TAN - Regular Width (D) 5 - 11.5, 12, 13, 14, 15 1150WTAN - Wide Width (EEE) 8 -11.5, 12, 13, 14, 15 Weight 39 - oz./pr (Size 9)

CLASSIC 9’’ SIDE ZIP

9’’ SIDE ZIP "MF" SAFETY

SPECIFICATIONS - YKK Zipper with Velcro Closure - Full Grain Leather Toe - 1000 Denier Nylon - Triple Stitched Upper - Stitched Outsole - Self-Cleaning, Multi-Tred Carbon Rubber, Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Footbed - Moisture Wicking Lining - Riveted Steel Shank Sandwiched Between 2 Flexible Lasting Boards - "Hot Melt" Heel & Toe Counters - Rust Proof Hardware - Round, Non-Fray Laces

SPECIFICATIONS - "MF" = Metal Free - Full Grain Leather Toe - 1000 Denier Nylon - Triple Stitched Upper - Self Cleaning, Multi-Tread Carbon Rubber Outsole - Slip Resistant, Non Marking Outsole - Compression Molded EVA Midsole - Removable Antimicrobial, Molded Orthotic Footbed - Moisture Wicking Lining - Side Zip Closure - Composite CSA Approved Puncture Resistant Midsole - Composite CSA Approved Safety Toe Cap

1152 - Regular Width (D) 7 - 11.5, 12, 13, 14, 15 Weight 44 oz./pr (Size 9) 1152W - Wide Width (EEE) 8 -11.5, 12, 13, 14, 15 Weight - 42 oz./pr (Size 9)

2252 - Regular Width (D) 5 - 11.5, 12, 13

9" WATERPROOF "MF" SAFETY

AIR 9” TACTICAL LEATHER WATERPROOF

SPECIFICATIONS - Leather and Nylon Upper - Internal Waterproof Breathable Membrane - Compression Molded EVA Midsole - Slip-Resistant, Oil-Resistant Outsole - Removeable Molded Orthotic Footbed - Moisture Wicking Lining - Airport Friendly Non-Metallic Shank - "Hot Metal" Heel Counter - Non-Fray Parachute Laces - Rust-Proof Hardware

SPECIFICATIONS - Full Grain Leather Toe - 1000 Denier Nylon - Slip-Resistant, Oil-Resistant Logo Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Footbed - Moisture Wicking Lining - Riveted Steel Shank Sandwiched Between 2 Flexible Lasting Boards - "Hot Melt" Heel Counter - Arch Ladder Tread - Rust Proof Hardware - Round, Non-Fray Laces

SPECIFICATIONS - Waterproof All Leather Upper - Internal Waterproof Breathable Membrane - Fully Gussetted YKK® Zipper with Velcro Closure - Removable Molded Orthotic Footbed - Slip-Resistant, Oil-Resistant Logo Outsole - Tough & Durable Moisture Wicking Lining - Steel Shank - "Hot Melt" Heel Counter - Arch Ladder Tread - Rubber Toe Cap - Round Non-Fray Laces - Rust-Proof Hardware

1270 - Regular Width (D) 5 - 11.5, 12, 13, 14, 15 1270W - Wide Width (EEE) 8 - 11.5, 12, 13, 14, 15 Weight - 47 oz./pr (Size 9)

1151 - Regular Width (D) 7 - 11.5, 12, 13, 14, 15 1151W - Wide Width (EEE) 8 -11.5, 12, 13, 14, 15 Weight - 41 oz./pr (Size 9)

1234 - Regular Width (D) 5 - 11.5, 12, 13, 14, 15 1234W - Wide Width (EEE) 8 - 11.5, 12, 13, 14, 15 Weight - 44 oz./pr (Size 9)

9" TACTICAL WATERPROOF

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FOOTWEAR Footwear by ORIGINAL SWAT

CLASSIC 9” WATERPROOF CAMO

SEK 9000

10" M.T.

SPECIFICATIONS - Internal Waterproof Breathable Membrane - Leather & 1000 Denier Mossy Oak® Camo - Tough & Durable Moisture Wicking Lining - Nylon Upper - Compression Moulded EVA Midsole - ”Hot Melt” Heel Counter - Removable Molded Orthotic Footbed - Steel Shank - Moisture Wicking Lining - Self-Cleaning, Multi-Tred Carbon Rubber Outsole - Round Non-Fray Laces - Rust-Proof Hardware

SPECIFICATIONS - Tumbled Leather Upper with Armo-Dillo Abrasion-Resistance - VIBRAM® Self-Cleaning, Multi-Tred Carbon Rubber Outsole - Removeable Molded Orthotic Footbed - Heel & Forefoot Gel Inserts - Moisture Wicking Lining - Lightweight, Riveted Steel Shank Sandwiched Between 2 Flexible Lasting Boards - Exclusive Original SWAT Tactical Last - "Hot Melt" Heel & Toe Counters - Rust-Proof Hardware - Non-Fray Tactical Laces

SPECIFICATIONS - Leather and Punture-Resistant Nylon Upper - Slip-Resistant, Oil-Resistant Logo Outsole - Compression Molded EVA Midsole - Removeable Molded Orthotic Footbed - Moisture Wicking Lining - Airport-Friendly Non-Metallic Shank Sandwiched Between 2 Flexible Lasting Boards - Lightweight, Riveted Steel Shank Sandwiched Between 2 Flexible Lasting Boards - "Hot Melt" Heel Counter - Arch Ladder Tread - Rust-Proof Hardware - Non-Fray Tactical Laces

9000G - Regular Width (D) 7 - 11.5, 12, 13 Weight - 43 oz./pr (Size 9)

1262 - Regular Width (D) 7 - 11.5, 12, 13, 14, 15 1262W - Wide Width (EEE) 8 - 11.5, 12, 13, 14, 15 Weight - 47 oz./pr (Size 9)

AIR 9’’ AIR SIDE ZIP M.T.

6’’ M.T.

AIR M.T. LO

SPECIFICATIONS - Full Grain Leather Toe - 1000 Denier Nylon - YKK® Zipper with Velcro® Closure - Air Cushion/Injection Molded EVA Midsole - Slip-Resistant, Oil-Resistant Logo Outsole - Moisture Wicking Lining - Airport-Friendly Non-Metallic Shank - "Hot Metal" Heel Counter - Arch Ladder Tread - Rubber Toe Cap - Rust Proof Hardware - Round, Non-Fray Laces

1232 - Regular Width 5 – 11.5, 12, 13, 14, 15 1232W - Wide Width (EEE) 8 – 11.5, 12, 13, 14, 15 Weight - 42 oz./pr (Size 9)

1151 - Regular Width (D) 7 - 11.5, 12, 13, 14, 15 1151W - Wide Width (EEE) 8 -11.5, 12, 13, 14, 15 Weight - 41 oz./pr (Size 9)

SPECIFICATIONS - Full Grain Leather Toe - 1000 Denier Nylon - Air Cushion/Injection Molded EVA Midsole - Slip-Resistant, Oil-Resistant Logo Outsole - Removable Molded Orthotic Footbed - Moisture Wicking Lining - Airport Friendly Non-Metallic Shank - "Hot Melt" Heel Counter - Arch Ladder Tread - Rubber Toe Cap - Rust Proof Hardware - Round, Non-Fray Laces - Weight - 29oz/pair (size 9 Men’s)

1276 - Regular Width (D) 7 - 11.5, 12, 13, 14, 15 1276W - Wide Width (EEE) 8 - 11.5, 12, 13, 14, 15 Weight - 44 oz./pr (Size 9)

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

1230 - Regular Width (D) 5 - 11.5, 12, 13, 14, 15 1230W - Wide Width (EEE) 8 - 11.5, 12, 13, 14, 15 Weight - 37 oz./pr (Size 9)

FOOTWEAR Footwear by ORIGINAL SWAT

DRESS OXFORD

CLASSIC 6’’ SIDE ZIP

SPECIFICATIONS - Clarino Style Upper - Slip and Oil Resistant Blown Rubber Welted Outsole - "Hot Melt" Heel and Toe Counters - Waxed Laces - Removable Molded Orthotic Footbed

SPECIFICATIONS - YKK Zipper with Velcro Closure - Full Grain Leather Toe - 1000 Denier Nylon - Triple Stitched Upper - Stitched Outsole - Self-Cleaning, Multi-Tred Carbon Rubber Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Footbed - Riveted Steel Shank Sandwiched Between 2 Flexible Lasting Boards - "Hot Melt" Heel & Toe Counters - Moisture Wicking Lining - Rust Proof Hardware - Weight - 37oz/pair (size 9)

1180 - Regular Width (D) 5 - 11.5, 12, 13 1180W - Wide Width (EEE) 8 -11.5, 12, 13 Weight - 37 oz./pr (Size9)

1251- Regular Width (D) 7 - 11.5, 12, 13, 14, 15 1251W - Wide Width (EEE) 8 -11.5, 12, 13, 14, 15 Weight - 41 oz./pr (Size 9)

ACCESSORIES S.W.A.T. SHIELD WATERPROOF

TRIPLE LAYER GEL INNERSOLE A2154 Size - Regular Width (D) 7 - 11.5, 12, 13, 14, 15

Waterproofs and protects your boots against water, dirt, and stains. A concentrated, colourless, topically applied spray with no adverse effects on the suppleness and breathability of your boots A4000

ORIGINAL S.W.A.T. TACTICAL LACES

Unique ridges construction, laces stay tied A9001 A9002

8-EYELET LACE-IN ZIPPER A1153 Black

55" 68"

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FOOTWEAR Footwear by DANNER

Waterproof, lightweight, and made in the USA, these are the smart choice for the officer who knows who he’s chasing, but not where the chase might take him.

DANNER VIBRAM® DURALOGICAL

8” ALL LEATHER Also available in: 8” LEATHER/CORDURA

Style No. 26055 Style No. 26053

ACADIA® ELITE STYLE #

MEN’S SIZE

COLOUR

INSULATION

WEIGHT

26053

3-16B, D, EE & 3-14EEEE

BLACK

48 OZ

26055

3-16B, D, EE & 3-14EEEE

BLACK

50 OZ

FORT LEWIS® 10” 200 GRAM PLAIN TOE MEN’S/WOMEN’S UNIFORM BOOT Created with the help of two career Army officers from Fort Lewis, Washington, the Fort Lewis is the standard that other military boots attempt to live up to. Made in the USA and FORSCOM approved, they are loaded with all the features that the consummate foot soldier needs. For those looking for the toughest cold weather work boot around, the Ft. Lewis cannot be beat. A cushioning Vibram outsole fights fatigue. A full-grain leather upper and GORE-TEX lining keep the boot completely waterproof. This soldier is ready for duty right out of the box.

Head Office: 1-866-652-2877

West: (604) 526-1631

• Color • Construction • Footbed

Black Stitchdown Airthotic

• Outsole • Shank • Toe

Vibram 148 Kletterlift Fiberglass Plain Toe

• Height • Insulation • Last

10” 200 G. Thinsulate(TM) 650

• Upper

• Lining • Midsole

Cambrelle Nylon 4.3 mm Rubber; 5.5 mm Polyurethane

2.0-2.2 mm Full-Grain Leather Yes 70 oz. GORE-TEX

Prairies: 1-866-652-2877

East: 1-877-993-9968

• Waterproof • Weight • Bootie

EMERGENCY Air-purifying Respirators by MSA GAS MASKS

The Millennium Chemical-Biological Gas Mask and the Advantage 1000 CBA-RCA Gas Mask are effective against biological agents and these chemical warfare (CW) agents: GA, GB (Sarin), GD, VX, Mustard, and Lewisite. Testing

conducted by MSA and independent laboratories assures that the gas mask and canister meet the requirements for effectiveness against CW agents using the test protocol recommended by the Chemical Agent Safety and Health

ADVANTAGE® 1000 CBA-RCA GAS MASK A clean, simplified respirator with Hycar facepiece (based on a proven facepiece design developed for the U.S. Armed Forces) that’s up to 40% lighter than conventional full-face respirators and gives high performance, customized fit, comfort, economy, and user acceptance. • Flexible, 1-piece polyurethane lens with wide field of vision is bonded to durable Hycar™ rubber facepiece • Dual-canister mount (bayonet mount) allows weapon sighting from either shoulder • Fully elastic, 6-point head harness promotes easy on-off, easy adjustment, no hair pulling • Standard nosecup helps eliminate lens fogging • Standard mechanical speaking diaphragm included, or add MSA’s optional ESP II Communications System • NIOSH-approved (No.TC-14G-0235) for protection against chloroacetophenone (CN), chlorobenzylidene (CS), P100 particulate efficiency level, and particulates Ordering Information Advantage 1000 CBA-RCA Gas Mask, complete with canister, nosecup and identification tag. Part No. Small 813860 Medium 813859 Large 813861 Advantage 1000 CBA/RCA Canisters, Box of 6 817590

Policy Action Committee (CASHPAC). They are also effective against OC (Oleoresin Capsicum) Riot Control Agent and HCN (Hydrogen Cyanide), but, again, have not been tested or approved by NIOSH for these applications.

MILLENNIUM™ CHEMICAL-BIOLOGICAL GAS MASK A Hycar version of the reliable military-style gas mask (MCU-2/P Mask, used by Air Force in Desert Storm) that combines high performance, customized fit, comfort, and cost efficiency. • Flexible, 1-piece polyurethane lens with wide field of vision is bonded to durable Hycar rubber face piece • Dual-canister mount (NATO 40mm thread) allows weapon sighting from either shoulder • Drinking tube provides connection for fluid ingestion in contaminated atmospheres • Fully elastic, 6-point head harness promotes easy on-off, easy adjustment, no hair pulling • Internal nosecup with 2 check valves deflects air from the lens, reduces fogging • Standard mechanical speaking diaphragm included, or add MSA’s optional ESP® II Communications System • NIOSH -approved (No. TC-14G-0254) for protection against chloroacetophenone (CN), chlorobenzylidene (CS), P100 particulate efficiency level, and particulates Ordering Information Millennium Chemical-Biological Mask, complete with canister, nosecup, drinking tube and clear polycarbonate outsert. Part No. Small 10007423 Medium 10007422 Large 10007424 Millennium CBA/RCA Canisters, Box of 6 818264

ADVANTAGE® 3200 CBA-RCA GAS MASK The Advantage 3200 CBA-RCA (Chemical Biological Agent-Riot Control Agent) Gas Mask is based on MSA's already very popular industrial Advantage 3200 Respirator. It features a soft, pliable silicone facepiece, yet serves as an economical, cost-effective alternative to more expensive Gas Masks for this application. • New 1-piece polycarbonate wraparound lens, engineered to be optically correct to eliminate distortion, promote superior visibility and peripheral vision. • Soft, pliable silicone facepiece with proven Advantage respirator seal that instantly conforms to wearer's face. • Choice of head harness: - New European-style Advantage head harness with easy on/off pre-adjustable straps, dons like a catcher's mask, or - More traditional Hycar rubber head harness • Dual-canister mount (bayonet mount) allows weapon sighting from either shoulder. • Proven exceptionally comfortable, lightweight, stable, and low maintenance. • Very low breathing resistance • Standard nosecup to help eliminate lens fogging • NIOSH-approved (No.TC-14G-0235) for protection against chloroacetophenone (CN), chlorobenzylidene (CS), P100 particulate efficiency level, and particulates.

Ordering Information Advantage 3200 CBA-RCA Gas Mask, complete with canister, nosecup, and identification tag Part No. Advantage Head Harness Small 10036324 Medium 10036325 Large 10036326 Rubber Head Harness Small 10038695 Medium 10038696 Large 10038697 Accessories Advantage 3000 CBA/RCA Canisters, Box of 6 817590 Spectacle Kit for Advantage Respirators 10029298

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

EMERGENCY

Air-purifying Respirators by MSA GAS MASKS - ACCESSORIES ESP® II COMMUNICATIONS SYSTEM

RESPONSE™ ESCAPE HOOD

The ESP II Communications System, a 1-piece, self-contained, electronic speech projection device, allows wearers to speak normally, yet be heard loud and clear. • Lightweight, maintains visibility, comfortable to wear, and easy to use • Compact, rugged; resists water, heat, and impact • Compatible with handheld radios for clear, long-range communications • Uses two standard AAA alkaline batteries, which last up to 15 hours

When escaping from chemical, biological, or riot control agents, every second counts. Depend on the Response Escape Hood from MSA. The hood gives your employees the protection they need to escape from a terrorist situation safely, quickly and easily – whether they work in highprofile office environments, for government agencies or embassies, or as law enforcement or first responders. And since it fits mostly any size and is compatible with long hair, glasses or a beard, the MSA Response Escape Hood is the equipment of choice for today's diverse workforce. Engineered for Maximum Performance Manufactured with a high-performance laminate material, the hood is designed to provide you with the latest in head and neck coverage with respiratory protection against chemical and biological agents. The soft, high-stretch rubber neck seal conforms to irregular neck contours, allowing a secure fit on a wide variety of users. Its unique nose cup helps reduce lens fogging and carbon dioxide buildup by directing airflow inside the hood.

Ordering Information Part No. 10026265

Description ESP Communications System for Millennium Facepiece and Advantage 1000 Facepiece

OPTIMAIR® 6A PAPR WITH OPTIFILTER® CARTRIDGES A Powered Air-Purifying Respirator (PAPR) that filters contaminants from ambient air and provides a constant air flow to a facepiece. Respiratory Protection • Used with combination cartridges for protection against particulates, toxic gases and vapors, or a combination of these hazards • Full-face Hycar rubber Ultravue® Facepiece in 3 sizes • 1,500-hour brush-type motor in motor/blower module • Maintenance-free lithium battery with 10-year shelf life • Optional rechargeable NiCad battery Ordering Information

Designed for Comfort In addition to designing the hood for maximum protection, MSA also took into account the comfort factor. A user who is potentially under stress requires ease of donning and use. The large lens and translucent hood allow better visibility, face recognition and help reduce claustrophobia. The nose cup allows communication superior to that of conventional devices, which require wearers to breathe through a mouth bit. With the integrated nose cup, wearers can breathe and speak normally to provide potentially life-saving communications. The hood also features cradle-type head straps that allow for quick, no assistance donning in the event of an emergency. Ordering Information

Part No. 816892

Description OptimAir 6A PAPR, complete with medium Ultravue Facepiece, lithium battery, belt, motor/blower module Replacement Parts 816912 Lithium Battery Pack for OptimAir 6A PAPR 491102 Motor/Blower Module 10011890 CBA/RCA OptiFilter Cartridges, Box of 6 Optional Battery and Charger 491120 Rechargeable NiCad Battery 463471 Standard Single-Unit Battery Charger 486614 Single-Unit, Dual-Rate Battery Charger Protective Covers 808494 Protective Covers, Package of 5

Part No. 10022208

Description MSA Response Escape Hood with CBA/RCA canister, packaged

Cpr Equipment THE EMERGENCY PACK You know you’re at risk providing CPR under emergency conditions. Reduce your risk of potential biological contamination. The Emergency Pack contains a CPR MICROSHIELD®, a pair of latex gloves and a SANI-DEX antimicrobial hand wipe. The cost-effective kit was designed to attach conveniently and accessibly to a key ring (included).

LENS OUTSERT Polycarbonate lens outsert snaps into place over Millennium or Advantage 1000 facepiece lens, providing additional impact protection. Tinted outsert helps conceal identity (suitable only when sufficient light exists). Ordering Information Part No. Description Lens Outsert for Millennium Facepiece 10008907 Small, clear 10008906 Medium/Large, clear 10008909 Small, tinted 10008908 Medium/Large, tinted Lens Outsert for Advantage 1000 Facepiece 806463 Small, clear 806462 Medium/Large, clear 806465 Small, tinted 806464 Medium/Large, tinted

The Emergency Pack comes in a nylon pouch. The CPR MICROSHIELD® is composed of a clear soft membrane which conforms to the victim’s facial contours. In addition to the barrier membrane, the device has a unique antireflex, one-way valve which prevents the victim’s oral secretions from contacting the rescuer through the mouthpiece/airway.

CONTAINS: • Disposable one-way valve CPR MICROSHIELD® • Pair of Nitrate gloves • Antimicrobial handwipe • Small, lightweight, and portable SIZE 2.5”L x 1.5”w x 3”H

Laser Protection Outserts in 2-band & 3-band are available.

CARRIER 817040

Carrier, Black Vinyl

SPECTACLE KIT 816137

Spectacle Kit for Advantage 1000 and Millennium Gas Masks

HOOD 305022

Head Office: 1-866-652-2877

Butyl-Coated Nylon Hood

West: (604) 526-1631

Prairies: 1-866-652-2877

HZRI

East: 1-877-993-9968

Microshield

METAL DETECTION Metal Detectors by GARRETT HANDHELD METAL DETECTORS SUPER SCANNER

SUPERWAND

A long-time favorite of security and law enforcement professionals around the world, Super Scanner is virtually eliminating the need for pat downs during weapons screenings, saving patrons from embarrassment and helping to protect security/law enforcement officers from needles and other harmful paraphernalia.

The sleek, easy-grip design of the SuperWand helps make everyone an effective security screener. Exclusive 360º Plus provides uniform sensitivity along the scan area including tip pinpointing. Choice of audible or silent vibrate/LED alarm, for less conspicuous detecting. Optional belt holder available.

Super Scanner features a reduction switch to help minimize rebar sensitivity interference while scanning at ankle level. Large scan surface enables quick and thorough scanning. Optional holder available to mount the Super Scanner on a belt or car. GA1165170 GA1610200 GA1610200 GA1600100 GA1600800 GA9965600

Super Scanner, 9V Nicad Battery Kit 110V (battery & charger) Nicad Battery Kit 220V (battery & charger) Earphone Belt loop harness Belt holster

INSPECTOR G-100 SECURITY WEAPONS/METAL DETECTOR The Inspector G-100 is a versatile weapons-metal detector that features a hand-held searchcoil for more powerful detection and pinpointing and ease of use. It’s handy for use in virtually any situation where portable equipment can be used to locate concealed weapons or metal objects.

ENFORCER G-2 The smallest of all handheld body scanners, the Enforcer G-2 features automatic circuitry powerful and sensitive enough to detect all concealed metal weapons, including the smallest knives or guns. It slips easily into a shirt pocket and can be held in the palm of almost any adult hand. The Enforcer G-2 sounds an audible alarm and signals with a red light whenever a target is located. An earphone is available for “silent” scanning. Also available is a Recharging Unit to permit the use of nickel cadmium (NiCad) rechargeable batteries (included) GA1165500 GA1600100 GA1610200 GA1610800 GA1601100

Enforcer G-2

FEATURES: • Automatic Returning • Highly versatile and easy to use • 3-way operating configuration: desk model, belt mounted or hand-held. • 7 1/2-inch general-purpose searchcoil • Weighs 2lbs 12 oz. and uses rechargeable NiCad batteries • Warranty: 24 months, parts and labor

Enforcer G-2 with standard 9-volt battery Earplug 110V recharging unit (includes NiCad bat.) 220V recharging unit (includes NiCad bat.) Belt holster

GA1161000 GA1161070 GA1603000

Inspector G-100 with 110 V charging system Inspector G-100 with 220 V charging system Metal detector headphones

GROUND SEARCH METAL DETECTORS INVESTIGATOR G-500

INVESTIGATOR CX PLUS

The Investigator G-500 is a microprocessor-driven ground search detector that pinpoints targets automatically. Just press POWER, search for hidden weapons and evidence, and the Investigator 500’s patented Graphic Target Analyzer will reveal the item detected.

The microprocessor-driven Investigator CX Plus is designed to achieve extraordinary depth and efficiency under the toughest operating and ground conditions. This successor to the famed Master Hunter CX detector builds upon the technology of its predecessor, incorporating a more rugged LCD that reveals a detected target’s identity and conductivity while in the All-metal or Discrimination search mode.

The Investigator G-500 is extremely easy to use. The easy-to-read LCD continuously displays all control and discrimination settings, while the Target ID cursor helps identify specific targets even in very trashy areas. The G-500 offers an All-Metal search mode or a 24-notch Discrimination mode that can be tailored to exclude specific targets from detection.

To hunt for deeply buried targets, switch to the All-Metal mode and Garrett’s exclusive Fast Track will ground balance the detector’s circuitry. Attach Garrett’s famed Bloodhound Depth Multiplier and search at depths two to four times deeper than conventional searchcoils. GA1151173 GA1603000 GA2217800 GA2217600 GA1617000

Investigator G-500 with 8-1/2" Crossfire Searchcoil Headphones 12-1/2" Searchcoil Crossfire 4-1/2" Searchcoil Deluxe Carrying Case

#1199270

With 8 1/2" Crossfire searchcoil

SEA HUNTER MARK II The Garrett Sea Hunter Mark II is a microprocessor driven pulse induction submersible that is lightweight, highly durable and very easy to use. It can locate both ferrous and non-ferrous metals concealed within and beneath aquatic growth, bottom soil and rocks, wood and other non-metallic materials. Even large items such as, boats, motors and safes located several feet deep can be easily detected by the Sea Hunter Mark II. #1151970 With 8 1/2" Crossfire searchcoil, four stem mount arrangements, including the shortstem ScubaMate

an exclusive Discrete Target Elimination mode, in addition to a standard one, which enables it to differentiate between similarly conductive targets more precisely. Comes with four handy stem mounts: the long stem with top stem mount, under cuff stem mount, hip mount and the short stem ScubaMate. The long stem enables you to carry the control housing on your waist or shoulder, while the ScubaMate is ideal for searching on land or in shallow water.

A favorite among crime scene investigators. It boasts superb sensitivity, speedy target response and features

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

METAL DETECTION Metal Detectors by GARRETT WALK-THRU METAL DETECTORS MAGNA SCANNER MT 5500

MAGNASCANNER MS3500

Maximum throughput with multidimensional scanning. The Magnascanner MT 5500 indicates which side target is located and the detection field eliminates "hot spots." Eight touchpads on the overhead LCD Panel perform all control functions. Microprocessors in detection and control circuits insure sensitivity and flexibility of programming with a maximum of 200 separate and distinct levels of sensitivity.

Built for Maximum security with minimum Maintenance. This heavyweight champ is built to withstand outside weather conditions or rough handling anywhere, and yet give reliable screening at all times. The Magnascanner MS 3500 was designed specifically to stand up to the everyday demands of jails, prisons, and other facilities requiring maximum security with minimum maintenance. Or, for any outdoor venue where weather is a factor.

• • • • • •

• •

Fully automatic 90 to 265 VAC, 50 or 60 Hertz, 5 watts Audio and alarm lights indicate which side target is Multiple coil circuitry minimizes false alarms Touchpad control and security Weighs approx. 115 lb. (52.1 Kg) Approved by FAA

GA1167700 GA2225500 GA2225770 GA1168000 GA1603900 GA1167700 GA2225500 GA2225770 GA1168000 GA1603900

• • •

Magnascanner Remote control console for remote operation Battery Module (up to 20 hrs. use) quick recharge capability Magna Dolly wheel assembly for moving Stabilizer Base Magnascanner Remote control console for remote operation Battery Module (up to 20 hrs. use) quick recharge capability Magna Dolly wheel assembly for moving Stabilizer Base

Weighs approx. 189 lbs. Damage Proof Materials: All the materials used to assemble the unit were selected because of the nonreaction to weather capabilities. Electrical: fully automatic input: 100 to 240 VAC. 50-60 Hz, 5 watts. Operating Temperatures: -20°C to 70°C Warranty: 24 months, parts and labor

GA2225700 GA1600600 GA2225600

Battery Module (operates 20 hours in one charge) Operational Test Piece Desktop Remote Control - with standard 50 ft. length of cable

MAGNASCANNER CS5000 Microprocessor-controlled, walk-through metal detector, with Touchpad Controls and LCD for greater ease and clarity of operation, provides a maximum of 99 separate and distinct levels for both programs and sensitivity - an almost infinite number of precise, resettable program/sensitivity settings, enabling it to respond more effectively to weapons while ignoring harmless objects. Uniform detection from archway to floor meets the latest requirements of the Federal Aviation Administration and law enforcement agencies. Touchpads and an LCD that clearly reports all calibration and operating information simplify procedures. A dual-level system of access codes enhances security while eliminating bothersome keys.

• • • • • • •

ACCESS touchpad for changing codes is available only to authorized personnel; a tamper alarm sounds within 10 seconds after the ACCESS touchpad is pressed unless a proper access code is entered Electronics: Digital-controlled pulse induction metal detector with microprocessors utilized in both detection and control circuitry. Designed for tailoring specific programs to fulfill various security applications. Electronics are modular and designed for easy plug-in and change Overhead Control Unit: LCD Display, LED bar graph and control touchpad plus all wiring, connections and electronics are integrated in a single overhead compartment Regulatory Standards: Meets (or exceeds) all 1991 Federal Aviation Administration airport applications specifications as well as all requirements of National Institute of Law Enforcement and Criminal Justice (NILECJ)standard 0601.00, security levels 1-5 Weighs approximately 99 lbs. (45 kg) Warranty: 24 months, parts and labor

GA1167410 GA2225600 GA2225700

Magnascanner CS5000 Remote Control (operation from 50 feet) Battery Backup (up to 20 hrs.)

GA1168000 GA1603900

Magna Dolly wheel assembly for moving Stabilizer Base

MAGNASCANNER PD 6500 WALK-THROUGH METAL DETECTOR FOR PRECISE TARGET LOCATION Improved Detection Performance • Pinpoints targets — right, left, or center of body from head to toe • Multi-coil design reduces susceptibility to outside interference • Zone by zone calibration optimizes detection field • Less than 5% false alarm rates capability • Reduces false alarms caused by common items such as keys, coins, etc. Increased Operating Flexibility • Unique pacing lights for increased throughput • Touchpads and backlit LCD for greater ease and clarity • Continuous on-line operating status reports • Computerized access codes render settings tamperproof

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Proven Reliability, Quality, and Value • Meets latest requirements of FAA and other regulatory bodies • Complete, automatic self-diagnostic program • Rugged, yet designed for easy portability • Automatic voltage regulation for use anywhere • Optional battery back-up module • Simplified method for achieving optimum settings • Meets international standards for C E regulations • Modular unit design simplifies maintenance Proven dependability for over 35 years DETECTION

METAL DETECTION Metal Detectors by TORFINO ENTERPRISES INC. HANDHELD METAL DETECTOR

METAL-TEC 1400 Silently alerts the officer to weapons, razor blades, handcuff keys and drugs in metal foil from inches away. The METAL-TEC® gives the officer a tactical advantage during searches and pat downs of suspects.

• • • • • •

THE ONLY SILENT VIBRATING METAL/WEAPONS DETECTOR DESIGNED FOR LAW ENFORCEMENT METAL-TEC® includes a heavy duty nylon belt holster with a vehicle mounting kit allowing it to be Velcro® mounted to the prisoner cage, organizer, radio console, or door panel inside the patrol vehicle for easy access and convenience. METAL-TEC® can be detached from the vehicle and easily carried on the duty belt. The METAL-TEC® was designed to be used as an enhancement of the hand during searches, it can assist in locating with pinpoint accuracy, metal objects which may have been otherwise overlooked.

The METAL-TEC® requires only one hand for operation leaving the other hand available for more important tasks. METAL-TEC® can be hand held between the fore finger and the thumb freeing up the other fingers so they can be used during a search or frisking of the suspect. The METAL-TEC® can find a metal object, and pinpoint its location without the need for a constant sweeping motion. There is no adjustment necessary on the unit, sensitivity is factory preset and automatically compensates for temperature changes which may affect sensitivity. FCC approved/protected by US Patents No. 5,959,451 and Design Patent No. D410,399

DENSITY DISCRIMINATION

SPECIFICATIONS

The METAL-TEC® can help you determine the threat level of the metal weapon being detected based upon the objects size. The distance at which the unit detects an object can help the officer determine the objects size. Larger objects such as handguns can be detected approximately 3 to 4 inches away, and metal foil (which may contain drugs) can be detected approximately 1/8 inch to 1 inch away based on the size or amount of foil.

Detection:

VIBRATION SIGNATURE The METAL-TEC® can determine the approximate physical shape (length and width) of a metal/weapon being detected. After detecting a metal/weapon take the unit and turn it on end, pointing it toward the object. Now move it up and down (vertically) and side to side (horizontally) over the object being detected. By observing where the vibration starts and stops while moving the unit over the object you can determine its approximate length and width.

• • •

Made of high impact ABS plastic that can withstand 6,800 pounds per sq. inch Water resistant housing Non-slip vinyl rubber grip Simple operation, no adjustment needed, push on/off button concealed in the grip Approximately 200 searches with one 9 volt alkaline battery (included) The low battery indicator causes the unit to constantly vibrate as soon as the power is turned on, which notifies the user to replace the battery Includes heavy duty black nylon belt holster and vehicle mounting kit Engineered and assembled in the USA and includes a three year manufacturers warranty Only 7.9" long and weighs 8.8 ounces

Triaxial detection field, uniformly detects ferrous and nonferrous metals inches away, in all directions regardless of the position relative to the subject. Dimensions: Length - 7.9" (20 cm,) width - 1.75" (4.5 cm), height - 1.30” (3.5 cm) Weight: 8.8 ounces (249.4 grams) Sensitivity control: Factory set and calibrated Indicators: Silent vibration Controls: Single control (power on/off) Battery: Standard 9 volt alkaline Operating temperatures: –15°F (–26°C) to 130°F (54°C) Humidity: 98% Non condensing Case material: High impact ABS plastic with a tensile strength of 6,800 p.s.i. Operating frequency: 360 kHz Regulatory standards: FCC Part 15 (ID# NJ21200METAL-TEC), meets OSHA CFR1910.97a2i, IEEE C95.1-1992 CE – meets standards: EN 50082-1:1997 harmonized & EN 50081-1:1993 harmonized

Helps reduce contact when a male officer is searching a female suspect.

The METAL-TEC® includes a heavy duty nylon holster and vehicle mounting kit. Using the self adhesive Velcro mounting kit, allows the METAL-TEC® to be mounted to the prisoner cage, door panel, windows, organizers, radio console, or any smooth surface in the vehicle. This allows the officer to switch between carrying it on the belt or vehicle mounting for easy access.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLIPBOARDS Clipboards by SOMAR CORP.

THE POSSE BOX

• • • • • • • • • •

THE POSSE JUNIOR

SO-PB37C & SO-PB37L

• • • • • • • •

Lightweight, nonreflective hard, anodized aluminum Self-locking latch Non-skid base Police model patented wide clip Separate pencil tray Dual tray convenience Forms held flat on lid Fits inside command post Patented clip grip to secure pencil/pen to Posse Box Accommodates Posse P-Lite PL-10

CODE ASOPB37C ASOPB37L ASOPB37S

SIZE 9" X 14" X 1-1/2" 9" X 16" X 1-1/2" (LEGAL) Side Opening

THE POSSE JUNIOR SO-PJ32D & SO-PJ32L

• • • • • • • • • •

Lightweight, non-reflective hard, anodized aluminum Self-locking latch Non-skid base Police model patented wide clip Separate pencil tray Dual tray convenience Forms held flat on lid Fits inside command post Patented clip grip to secure pencil/ pen to Posse Box Accommodates Posse P-Lite PL-10

CODE ASOPJ32D ASOPB37L SO-LF32L

• • • •

SIZE 9" X 14" X 1" 9" X 16" X 1" (LEGAL) POSSE LONG FORM

CITE CADDY SO-CT3 & ASO-RT5

• • • •

Lightweight, non-reflective hard, anodized aluminum or Black Vinyl Patented pencil holder clip Recessed hinge springs protects clothing from tears Cork on bottom holds unit firm on smooth surface Slim storage keeps forms dry and protected Smooth outer lid provides hard writing surface & prevents imprinting on carbons below

Lightweight, non-reflective hard, anodized aluminum or Black Vinyl Compact storage for extra Cite Book, Cheat Sheet and completed copies Quick-opening front allows rapid handling of Citations Built-in Driver's License Holder behind clip

ASOCT3 ASORT5

Holds up to 6" x 9-1/2" booklet Holds up to 6" x 10-5/8" booklet

SO-TTS43

• • • • •

Lightweight, non-reflective, hard, anodized aluminum or Black Vinyl Special Drivers License Clip built in Heavy-duty snap/strap prevents accidental opening of unit Compact storage for extra cite Book, Cheat Sheet and completed copies Quick opening front allows rapid handling of Citations

4-1/2" x 10" x 5/8"

FLAT CLIP BOARD™

4 SIZES OF SNAPAKS

Lightweight, non-reflective hard, anodized aluminum Wider and longer than the standard dimensions Wide full-grip POSSE® Clip to accommodate the P-Lite™ Small bite holds forms tight Patented "Clip-Grip" to secure pencil to clip board

CODE SOLL155 ASOLR125 ASOSP875

Lightweight, non-reflective hard, anodized aluminum or Black Vinyl Stronger material is lightweight, but wears longer Slim storage keeps forms dry and protected Smooth outer lid provides hard writing surface & prevents imprinting on carbons below

8-1/2" x 14" x 1/2"

Fits all sizes to 8 1/2" x 11" Storage tray 3/4" deep

• • • • •

SO-SSA45

Lightweight, non-reflective hard, anodized aluminum Stronger material is lightweight, but wears longer Slim storage keeps forms dry and protected Smooth outer lid provides hard writing surface-prevents imprinting on carbons below Fits all sizes up to 8-1/2" x 12" forms

SO-SSA46

STYLE A HOLDER SO-SSA45 DEEP BOTTOM

• • • • • •

Aluminum Anodized seven colours - Blue, Red, Gold, Green, Brown, Yellow, Black Vinyl Clad-White and Black Marble Durable, non-reflective easy to clean Heavy duty clip holds from 1 sheet to 1" of paper Hinged on the left side and opens like a book for easy one-handed operation Nickel Plated latch keeps both compartments closed securely Double cork strips prevents unit from sliding Special Drivers License Clip

STYLE A HOLDER

• • • • •

VAASO-PJ32S

• • •

SIZE 9-1/4" x 15-1/2" (LEGAL) 9-1/4" X 12-1/2" (LETTER) 9-1/4" X 8-3/4" (SHIPPER)

Sturdy, easy to open clip holds your forms in place A functional, hinged cover serves as a solid, even writing surface The storage compartments hold over 30 completed forms

CODE SOMAB8512 SOMAB5795 SOMAB8514 SORAB43 (DEEP)

SIZE 8-1/2" X 12" 5-2/3" X 9-1/2" 8-1/2" X 14" 10" X 4-1/2" X 1-1/4"

SO-CHP50

• • • •

Lightweight, non-reflective hard, anodized aluminum or Black Vinyl Special Drivers License Clip Outer strap secures entire unit Positive snap secures cite storage

Holds up to 4-1/2" x 10-1/2" booklet Overall 5" x 12-1/4" x 1

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLIPBOARDS & NOTEBOOKS The Command Post by SOMAR CORP. STANDARD COMMAND POST™ SOPCP-12

• • • •

Tough ABS construction Patrol system at officer's fingertips Cutaway base for immediate access to horizontal shotgun Writing surface on lid with clip and strap to secure papers

Built to withstand more stress than its owner Overall 16" x 12" x 8" Accommodates the Posse box and patrol light (not included) Accommodates all paperwork in lid to give first access to emergency items in base

EXTRA WIDE CLIP ON THE OUTSIDE

ELASTIC BAND holds your papers flat and in place

PAPERWORK ORGANIZER two compartment file folder

SELF-LOCKING BRACE

FULL LENGTH STEEL PIANO HINGE

DEEP LOWER COMPARTMENT 16" x 11-3/4" x4"

ALUMINUM DIVIDER keeps the POSSE BOX clipboard neatly stored in the lid

QUICK RELEASE LATCHES

TWO CORK STRIPS keep the COMMAND POST on the seat of your vehicle

TOUGH ABS CONSTRUCTION 30% thicker than Samsonite Cases

Clipboard Accessories by POSSE PRODUCTS STEERING BOARD WRITER SOSBW

CLIPBOARD LIGHT SO-PL10

For people on the go. It fits over most standard steering wheels in any position, and works great for left or right handed people. Constructed of durable, non-reflective black or silver vinyl clad aluminum. Easily stored beside or under the seat, or in attache case away from your vehicle.

•

9-1/4" x 15-1/2"

•

• • • • •

Shielded bulb protects night vision and prevents silhouette Flexible to maneuver beam Floods entire writing surface Clips on all POSSE® equipment Overall base 6-3/4" x 1" White bulb furnished, 2 AA batteries not furnished Accommodates red bulb, not furnished

Evidence Notebooks by TRIFORM

• • • • • •

200 Writing pages, with every page numbered, 1-200, offering tighter control and exact page referencing. This better system replaces folio numbering of one side only, 1-100. All pages have horizontal rulings with a vertical Day / Time / Key Word column at the left. The pages will not fall out because of the Sewn Construction Binding. The pages lie flat for easier writing because of the Sewn Construction Binding. Your written notes stand out because of faint blue tint ink colour of ruled lines. Contents of text pages are up-dated. TRIFORM NOTEBOOKS never stand still; they grow to meet your needs and requirements.

TFDBC-24

Citation & Notebooks by MD CHARLTON MD CHARLTON CUSTOM NYLON Rugged, all-weather nylon citation book. CNWM013

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

LOCKERS

Pistol Lockers by CANADIAN LOCKER DESIGNED AS STACKABLE MODULES, EACH COMPRISED OF FOUR INDIVIDUAL COMPARTMENTS.

May Be Wall or Desktop Mounted

Each opening is 121⁄2" deep x 6" wide x 41⁄2" high and padded. Constructed of heavy gauge steel, each cabinet is phosphate treated with blue baked on enamel finish. The fluted anodized aluminum sliding doors operate within extruded tracks and are

secured by a proprietary key system, with over 16 million combinations not available to the commercial market. Each pistol locker weighs just 24 lbs., comes with two (2) keys per lock, and is shipped fully assembled. The modules may be used individually or in groups attached to counters, wall, desks or file cabinets. Product Code: CCL-00253000

Lockers by TUFLOC MODUBOX™

LOCKBOXES

ModuBox™ Lockers and Security Compartment boxes protect evidence, property and weapons. Available in a wide range of sizes, these units are manufactured from heavy (12/14 gauge) welded steel. Exterior surfaces are finished with an off-white baked epoxy powder coating for durable good looks. Individually keyed units are available in several optional colors.

Heavy gauge steel and Medeco cylinders store handguns and valuables safely and conveniently. Tufloc lockboxes offer unlimited mounting options in many areas including vehicles and buildings.

Other Features Include: Key or combination locks Keyed alike or different Optional interior configurations Free standing or in-wall mount Modules can be stacked Lockers are 18" deep and 15" wide Boxes are 13.5" deep and 14" wide Boxes include a fully padded interior

• • • • • • • •

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CASES

Cases by STORM CASE CASES

iM2050

iM2075

iM2100

iM2306

iM2370

iM2700

iM2720

iM2750

iM2300

iM2500

iM2600

iM2875

iM2950

Exterior Length (in.)

Exterior Width (in.)

Exterior Height (in.)

Wheels & Telescoping Handle

Meets Carry-On Reg.

iM3200

Interior Height (in.)*

iM3075

Interior Width (in.)

Model # iM2050 iM2075 iM2100 iM2200 iM2300 iM2306 iM2370 iM2400 iM2500 iM2600 iM2700 iM2720 iM2750 iM2875 iM2950 iM2975 iM3075 iM3100 iM3200 iM3300

iM2400

Interior Length (in.)

iM2975

iM2200

9.5 9.5 13.0 15.0 17.0 17.0 18.2 18.0 20.5 20.0 22.0 22.0 22.0 22.5 29.0 29.0 29.8 36.5 44.0 50.5

7.5 7.5 9.2 10.5 11.7 6.3 12.1 13.0 11.5 14.0 17.0 17.0 17.0 21.1 18.0 18.0 20.8 14.0 14.0 14.0

4.25 7.25 6.0 6.0 6.2 6.2 5.2 6.7 7.2 7.7 8.0 10.0 12.7 11.4 10.5 13.8 17.8 6.0 6.0 6.0

11.8 11.8 14.2 16.2 18.2 18.2 20.0 19.2 21.7 21.2 24.6 24.6 24.6 24.9 31.3 31.3 33.3 39.8 47.2 53.8

9.8 9.8 11.4 12.7 13.4 8.4 14.7 15.2 14.1 16.0 19.7 19.7 19.7 23.7 20.4 20.4 24.4 16.5 16.5 16.5

4.7 7.7 6.5 6.6 6.7 6.7 5.8 7.3 8.9 8.3 8.6 11.7 14.4 13.1 12.2 15.5 19.3 6.7 6.7 6.7

N N N N N N N N Y N N Y Y Y Y Y Y N N N

Y Y Y Y Y Y Y Y Y N N N N N N N N N N N

Head Office: 1-866-652-2877

iM3300

HARDIGG STORM CASE

Storm Cases are the most solid protective cases in the industry. More than just a protective shell, they’re integrated protection systems. Manufactured with our own HPX® high performance resin, easy Press & Pull latches and durable soft-grip handles, they’re the most comfortable, toughest transport cases available. Our multilayer foam option allows you to easily customize the foam to your exact needs. If you’ve got sensitive, expensive or vital equipment to move, you need the power of a Storm behind you. We’ll even guarantee it for life. That’s how sure we are that our Storm Cases will never fail. Storm Cases are more than just watertight, padlockable and made in the USA, they’re also Unconditionally Guaranteed for Life. Ideal For Use In: Electronics, Video Broadcast, Aerospace, Chemical/Petroleum, Marine, Scuba, Law Enforcement, Fire & Emergency Services, Military/Government, Sports & Recreation, Public Safety and Photography. Any place you need superior protection.

* Includes 2” lid depth

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

MULTI-TOOLS & KNIVES Multi-Tools & Knives by GERBER KNIVES

LMF II Infantry - Black Blade, Coyote Brown Handle w/sheath

LMF II ASEK KNIFE SYSTEM

TECH SPECS • Overall Length: • Length of Blade: • Blade Material: • Handle Material:

This knife is as adaptable as the personnel who carry it. Use it to cut through the skin of a fuselage. Or sever a seat belt. Or egress through the Plexiglas of a chopper. Plus, the LMF II does a slick job cutting firewood and building shelter. The over-molded handle successfully limits blistering. There is complete separation between the tang and butt cap, so the knife absorbs the shocks from hammering and prevents the shocks of electricity. Smartly situated grooves and lashing holes let the LMF II convert to a spear. The low-profile sheath facilitates movement, limits noise, works for parachuting, and attaches to a belt or Molle vest. The patented, integrated sharpener means edge retention in the field.

10.59” 4.84” Sandvic 12C27 Stainless Steel Glass-filled nylon core with rubber grip

LMF II Infantry - Black Blade, Black Handle w/sheath

MULTI-USE SITUATIONS

ATTACHMENT OPTIONS

Use as a hammer Calf Attachment

Belt Attachment

Converts to a spear

Plexiglas punch for quick egress

Molle Compatible

PARAFRAME™ I

TECH SPECS • Overall Length: • Length Closed: • Length of Blade: • Weight: • Blade Material: • Handle Material: • Blade Style: • Blade Type:

SERRATED EDGE

There is a simplicity to this knife that relates as much to function as it does to form. It’s a breeze to open. The clip point blade configuration is ideal for cutting in close quarters. Openness rules the day where the handle is concerned—there’s more air than metal—so it’s quite lightweight and quite easy to keep clean.

HINDERER RESCUE

Heavy Duty Blade

Oversized Thumb Stud

It took a fire fighter with a genius for knife design to conceive this feature-rich rescue knife. And Rick Hinderer did himself proud. He’s integrated some of the most important features a fire fighter will need. Even while wearing turn-out gloves, using this knife will not be an issue. The knife has larger, beefier features and mechanisms built-in. This is no ordinary rescue knife

External Lock Release

Safety Hook Cutter for Webbing & Clothing

7.01” 4.11” 3.01” 2.6 oz. High Carbon Stainless Stainless Steel Clip Point Serrated

Window Punch

TECH SPECS • Overall Length: • Length Closed: • Length of Blade: • Weight: Oxygen Tank Wrench (on backside of handle)

8.5” 5.1” 3.5” 5.6 oz.

Lanyard Hole

KNIFE FEATURES

USAGE

External Blade Release

Integrated sharpener

Over Sized Thumb Stud

9 Piece Tool Kit Use hook cutter on clothing

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

Safely slice seat belt

East: 1-877-993-9968

Window punch

Oxygen tank valve opener

MULTI-TOOLS & KNIVES Multi-Tools & Knives by GERBER MULTI-TOOLS FLIK

TOOL FEATURES

For those looking for the latest in multi-tool innovation from Gerber we proudly introduce the FliK, a revolutionary new tool that delivers industrial strength and professional grade functionality within a compact design meant for everyday use. The latest in our line combines one-handed deployment of pliers with outboard tools and a saw. Our patented Saf.T.Plus™ locking system assures tool components stay in place while in use.

Open-hand opening pliers

One-handed opening outboard tools with SAF.T.Plus locking system

TECH SPECS • Overall Length: 5.8” • Length Closed: 4.4” • Pliers Type: sliding jaw • Components: needlenose pliers, pinch style wire cutter, saw blade, can opener, cross driver, fine edge blade, scissors, small and medium flat drivers, bottle opener, serrated knife, lanyard • Handle Material: stainless steel • Sheath Material: ballistic nylon

TOOL KITS add to the functionality of your MultiPlier® by using this add-on tool kit. Contains an adapter, three different sizes of flathead bits, cross point bits and hex head bits.

MULTI-PLIER® 600 NEEDLENOSE

This much-applauded multi-tool offers profound versatility, and failsafe performance. And a level of rock-solid design and construction that pleases the eye and satisfies the soul. It all begins with high quality stainless steel. Then we incorporated Gerber’s patented one-handed opening pliers.

PRO SCOUT™

TECH SPECS • Overall Length: 6.61” • Length Closed: 4.92” • Pliers Type: Needlenose • Components: Needlenose pliers, wire cutter, wire crimper, fine edge knife, serrated knife, cross point screwdriver, small, medium and large flat blade screwdrivers, lanyard ring, can opener, bottle opener, file, and ruler. • Handle Material: Stainless Steel • Handle Color: Bead Blast • Sheath Material: Ballistic nylon

TECH SPECS • Overall Length: 6.61” • Length Closed: 5.04” • Pliers Type: Needlenose • Components: Needlenose pliers, wire cutter, wire crimper, serrated knife, RemGrit® saw with universal saw coupler, Fiskars® scissors, cross point screwdriver, small and medium flat blade screwdrivers, can opener, bottle opener, file, and ruler. • Handle Material: Stainless Steel • Handle Color: Bead Blast • Sheath Material: Ballistic nylon

MULTI-PLIER® 600, NEEDLENOSE The Pro-Scout is the most deluxe version of our Multi-Plier 600 line, with Fiskars® scissors and the patented universal saw coupler with the premium RemGrit™ blade. Like it’s brethren in the Multi-Plier 600 family of products, the Pro-Scout is engineered from premium stainless steel. And it sports our popular one-hand opening pliers and the Saf.T.Plus locking system.

V-cut wire cutters

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

MULTI-TOOLS & KNIVES Multi-Tools by LEATHERMAN MULTI-TOOLS

Today’s outdoor enthusiasts want to keep weight and volume to a minimum without sacrificing quality and true functionality. While multi-tools have multiple options, they’re often heavier with more features than are used on a regular basis. Conversely, pocket knives are light and streamlined, but render themselves useless when necessary adjustments call for a tool. Enter the new Skeletool platform: Minimal weight, compact size and endless capabilities.

Charge® AL includes scissors that slice through just about anything with beveled edges that allow them to get close to whatever you’re cutting, for a clean trim every time. Bit drivers for versatility, diamond-coated files for fine-point work and a 154CM clip-point knife are all housed in 6061-T6, hard-anodized aluminum alloy handles. Rounded edges for grip comfort and a stainless steel badge make this a Leatherman that’s really earned its name.

SPECS Tungsten DLC Scratcg-resistant Coating Carbon-fiber Handle Scale Needlenose Pliers Regular Pliers Wire Cutters Hard-wire Cutters 154CM Stainless Steel Combo Knife Carabiner/Bottle Opener Bit Driver Removable Pocket Clip Length: 4 in | 10 cm Weight: 5.0 oz | 142 g

Charge Nylon

CHARGE® AL

Charge Leather

SKELETOOL™ CX

INCLUDED BITS Phillips #1 and #2 Screwdriver 3/16" and 1/4"

CORE® Core® is one solid tool for your toughest jobs. Leatherman’s latest 4.5” tool has powerful new pliers, longer blades, and easy-to-use locks. Core is the first Leatherman to feature hollow-ground screwdrivers in the standard sizes professionals use. Comfortable handles are rounded to give you a firm grip.

Head Office: 1-866-652-2877

Diamond-coated File Large Bit Driver Small Bit Driver Large Screwdriver 8 Double-ended Bits Ruler (8 inch/19 cm) Bottle/Can Opener Wire Stripper Fixed Lanyard Ring Quick Release Lanyard Ring Length: 4 in | 10 cm Weight: 8.3 oz | 235 g

INCLUDED BITS Phillips and flat tip eyeglasses screwdriver Phillips #1 and #2 Hex 5/32” and 9/64” Hex 1/16” and .050 Hex 1/8” and 7/64” Robertson #2 and #3 Hex 3/32” and 5/64” Screwdriver 1/8” and Torx #15 Removable Pocket Clip Quick-release Lanyard Ring

CRUNCH®

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Standard Nylon

SPECS Locking Pliers Wire Cutters Hard-Wire Cutters Serrated Knife Metal/Wood File Ruler (Inch/Metric) Bottle Opener Large Screwdriver Phillips Screwdriver (#1 and #2) Hex Bit Driver Wire Stripper Lanyard Attachment Length: 4 in. / 10 cm Weight: 6.9 oz / 196 grams

Standard Leather

Standard Nylon

Locking pliers that fold away make Crunch unlike any multi-tool available today. It’s like carrying a vise with you. Clamps up to a 1" diameter pipe. Remove the adjusting screw and you’ll find a 1⁄4” hex-bit adapter built right in. Locking blades release with the push of a button.

Standard Leather

SPECS Stainless Steel Body All-Locking Blades Needlenose Pliers Regular Pliers Wire Cutters Hard-Wire Cutters Stranded-Wire Cutters Electrical Crimper Clip-Point Knife Serrated Knife Wood/Metal File Saw 5/16” Screwdriver 7/32” Screwdriver 1/8” Screwdriver Phillips Screwdriver Awl w/Thread Loop Ruler (9 inches/22 cm) Bottle/Can Opener Wire Stripper Lanyard Ring Length: 4.5 in | 11.5 cm Weight: 10.8 oz | 307 g

SPECS Hand - anodized Aluminum Handles Needlenose Pliers Regular Pliers Wire Cutters Hard-wire Cutters Crimper 154CM Clip-point Knife Serrated Knife Scissors Saw Wood/Metal File

MULTI-TOOLS & KNIVES WAVE®

JUICE® CS4

The most popular full-size Leatherman tool is now better than ever. Larger knives, stronger pliers, longer wire cutters and all-locking blades make the new Wave an essential piece of equipment for most any job or adventure. Add the Leatherman Bit Kit for maximum versatility.

The Juice Cs4 is packed with excitement. Built on the same medium-sized chassis as the S2, it is protected by boldly colored anodized aluminum handles. The Cs4 comes with pliers, wire cutters and four screwdrivers, as well as a convenient saw and awl. Extremely useful serrated scissors are easily accessed, along with a handy corkscrew, perfect for an emergency picnic on the slopes. A lanyard attachment ensures that your Juice is always nearby, at the ready. The Cs4 is covered by Leatherman’s 25-year warranty.

Juice Leather*

SPECS Needlenose Pliers Straight Knife Wire Cutters Hard-Wire Cutters Extra-Small Screwdriver Small Screwdriver Med/Lrg Screwdriver Phillips Screwdriver Lanyard Attachment Can/Bottle Opener Corkscrew with Assist Scissors Saw Awl Length: 3.25 in | 8.25 cm Weight: 5.5 oz | 156 g

Wave Nylon

*Sold Separately

Spring-action scissors and personal care features that fit on your key chain are just part of what makes the Micra truly unique. Ten useful tools are packed into this tiny, lightweight Leatherman. Available in several colors in addition to the standard brushed stainless finish. Makes a superb gift.

SPECS Needlenose Pliers Regular Pliers Wire Cutters Hard-Wire Cutters Clip-Point Knife Wood/Metal File Saw Scissors Large Screwdriver Small Screwdriver Phillips Screwdriver Small Bit Driver Ruler (8 inch/19 cm) Bottle/Can Opener Wire Stripper Lanyard Ring Length: 4 in | 10 cm Weight: 6.9 oz | 196 g

SPECS Scissors Clip-Point Knife Tweezers Nail File / Cleaner Flat Phillips Screwdriver Extra Small Screwdriver Medium Screwdriver Bottle Opener Ruler Key Ring Attachment Length: 2.5 in | 6.5 cm Weight: 1.8 oz | 51 g

Micra Sleeve*

Loaded with the most requested features, Blast is ready for work. Longer blades mean easier slicing, sawing, filing and more, while Zytel handle inserts provide a comfortable, reliable grip. New designs for the handles and pliers help Blast sustain more than double the squeezing load of the original PST. Got a job to do? Have a Blast!

Standard Nylon

MICRA®

Standard Leather

BLAST®

Colors: Red, Green, Blue

INCLUDED BITS Phillips and Flat Tip Eyeglasses Screwdriver Screwdriver 3/16" and 1/4" Phillips # 1-2 and Screwdriver 3/16"

Wave Leather

SPECS Needlenose Pliers Regular Pliers Wire Cutters Hard-Wire Cutters Clip-Point Knife Serrated Knife Saw Scissors Wood/Metal File Diamond-Coated File Large Bit Driver Small Bit Driver Large Screwdriver Ruler (8 inch/19 cm) Bottle/Can Opener Wire Stripper Lanyard Ring Length: 4 in | 10 cm Weight: 8.5 oz | 241 g

Juice Polycarbonate*

Multi-Tools by LEATHERMAN MULTI-TOOLS

*Sold Separately

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

MULTI-TOOLS & KNIVES Multi-Tools & Knives by LEATHERMAN MULTI-TOOLS & KNIVES E300

K502X

A classic locking liner with Leatherman’s Blade Launcher®™ knife deployment mechanism. Durable glass-reinforced nylon handles provide a sure grip for working with the 420HC stainless steel blade.

Take everything you expect from a traditional lockback folder. Then pile on the features—can opener, bottle opener, bit driver (with six screw bit tips), even a carabiner clip—but do it so the extra versatility isn’t noticed until it’s needed. What you get is a product engineers like to call “feature dense,” which means the k502x and k503x provide maximum usefulness with minimum bulk. SPECS Thumb Stud 154CM Stainless Steel Blade Aluminum and Glass-filled Nylon Grip Carabiner / Bottle Opener Can Opener Bit Driver Removable Pocket Clip Blade Length: 3.1 in | 7.9 cm Weight: 7.2 oz | 307 g

TOOL ADAPTERS

90 degree angle

Closes handles to secure

45 degree angle

Leather Sheath

SPECS 1/4" Hex Drive 3 Locking Positions Lanyard Ring

Tool Adapters make your favorite Leatherman tool even more versatile by quickly converting it to a 1⁄4” hex drive. Standard Tool Adapter fits PST, PST II, Super Tool 200, Sideclip, Flair and Pulse. Wave Tool Adapter fits Wave only. Sold as a kit with six hex bits and case. Also available in a combination sheath with PST, PST II, Super Tool 200 and Wave.

Slides easily over plier jaws

Nylon Sheath

INCLUDED BITS Phillips #1 and #2 Screwdriver 3/16" and 1/4" Screwdriver 1/8" and Torx #15 k502x | combo blade

k502x | straight blade

e301 | combo blade

e300 | straight blade

SPECS Blade Launcher® Thumb Stud 420HC Stainless Steel Blade Glass-filled Nylon and Rubber Grip Carabiner / Bottle Opener Removable Pocket Clip Blade Length: 2.8 in | 7.1 cm Weight: 3.9 oz | 111 g

INCLUDED BITS #8-10 Slotted Bit #0 Phillips Bit #3 Phillips Bit #1 Robertson Bit #2 Robertson Bit #15 Torx Bit

POCKET TOOL HOLDERS MD CHARLTON CUSTOM NYLON

• • • •

Made of tough, reinforced, web nylon Velcro flap encases tool and holds it securely Velcros to duty belt Reinforced at stress points for durability

Specify Mini, Original or Supertool

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

EAR COMMUNICATION

Two-Way Radio Audio Accessories by EAR PHONE CONNECTION HAWK - SINGLE WIRE LAPEL MICROPHONE The entire unit consists of one wire. It runs from the radio, to the microphone, then up to the users private speaker. This practical & functional design makes the Hawk the most innovative audio accessory to date. Most of the unit is concealed under the uniform making it inaccessible to the bad guys, and since it is worn under your uniform it won't fall off. Included at no cost to you is your choice of a Rubber Ear-Mold fitted to either the left or right ear in three sizes; small, medium, or large.

The uni-directional microphone is sensitive to a whisper. It is no longer necessary to twist your head and speak into your shoulder.

The Acoustic Tube pictured here is fitted with a Rubber Ear Mold. It is easily concealable, difficult for the bad guys to get a hold of and can be worn comfortably for hours.

This unit is available with the Quick Releaseâ&#x201E;˘ feature

JAGUAR - TWO-WIRE SURVEILLANCE MICROPHONE

The Jaguar features an extra Push-To-Talk button that can be attached to your belt. The user only has to reach up to their waist to activate the microphone.

The multi-purpose microphone can be attached to your lapel or run down your sleeve & be used as a palm microphone.

When you are in the field & discretion is of the utmost importance, you need a Jaguar surveillance kit. The Jaguar comes standard with a Clear Acoustic Tube Earphone & a fitted Rubber Ear-Mold for both added discretion & comfort.

Head Office: 1-866-652-2877

This unit is available with the Quick Releaseâ&#x201E;˘ feature

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

EAR COMMUNICATION

Two-Way Radio Audio Accessories by EAR PHONE CONNECTION RHINO - HEAVY DUTY SPEAKER MICROPHONE The heavy-duty speaker microphone has set the standard for many years. It allows you to keep the radio on your belt and your hands on your work. • Professional quality, water resistant remote speaker microphone • Heavy duty construction featuring polyurethane cables & an impact resistant polycarbonate housing • Rubber sealed housing for heavy duty use in wet environments • High quality speaker & microphone elements that allow for clear audio while transmitting & receiving • Large PTT switch and a metal reinforced clothing clip that rotates a full 360 degrees • Features a 3.5mm earphone accessory jack providing the option of a listening only earpiece The Rhino is the perfect radio accessory for keeping your hands free during critical situations.

This unit is available with the Quick Release™ feature

FOX - LISTENING ONLY EARPHONES CLASSIC

MODERN

CLEAR

Discreet, covert and comfortable make the Clear Fox earphone indispensable. The Fox Series earphones are available in both long (20 inch) and short (6 inch) cable models. - The long cable models are available with 2.5mm, 3.5mm and 3.5mm threaded connectors. - The short cable models are available with 2.5mm and 3.5mm connectors.

Head Office: 1-866-652-2877

West: (604) 526-1631

The adjustable speaker can swivel allowing both the Classic and Modern earhooks to fit in either ear. The speaker can also be adjusted up or down to accommodate any size ear.

Prairies: 1-866-652-2877

The comfortable 15mm speaker produces a rich, full, natural sound and rests securely in your ear.

East: 1-877-993-9968

The Clear Fox earphone is formed from high grade surgical tubing that is attached to a high output speaker that connects discreetly below the collar. The Rubber Ear-Mold is the ideal accessory for use with any Acoustic Tube. This silicone rubber ear insert allows the user to hear all ambient sounds. It is lightweight and can be worn comfortably for hours.

EAR COMMUNICATION

Two-Way Radio Audio Accessories by EAR PHONE CONNECTION PYTHON - BOOM MICROPHONE

This comfortable lightweight Python Boom Microphone includes an earphone constructed of a soft rubber composite that will hold the headset in place, even during strenuous activity.

The large Push-To-Talk button is mounted in a rugged polycarbonate housing for maximum durability and has an accessory jack that will accept an additional Push-To-Talk button.

This unit is available with the Quick Release™ feature

The ring finger PTT accessory is the most practical accessory to use in conjunction with the Python Boom Microphone.

The adjustable speaker design will adjust to fit comfortably on any size ear, without having to disassemble the headset. The rotating microphone design can swivel 180 degrees, allowing the headset to be worn on either ear. This unit is equipped with a high-quality electric condenser microphone element that produces an excellent audio transmission. The boom armature can flex for optimum sound quality.

PANTHER - BONE VIBRATION MICROPHONE • • • • •

All-in-ear integrated microphone and speaker Communicate freely in highly noisy environments No wind interference sound Highly sensitive vibration pick-up microphone Features a 2.5mm accessory jack for an additional PTT button

COMPLICATED SITUATIONS REQUIRE INNOVATIVE SOLUTIONS PROBLEM: When all suited up, where do you put a microphone?

SOLUTION: Combine both speaker and microphone into the Panther earphone that fits completely in your ear, and you get the ability to speak and be heard without any complications. The ergonomically designed, simple to use Panther earphone can easily fit into the ear under any gas-mask and is the ideal accessory to wear while fighting fires or wearing a HAZMAT suit.

Head Office: 1-866-652-2877

Accessories: The ring finger accessory is the most comfortable way to key your microphone while suited up.

West: (604) 526-1631

Prairies: 1-866-652-2877

The Ear Cup can be used to secure the Panther in the ear.

East: 1-877-993-9968

EAR COMMUNICATION

Two-Way Radio Audio Accessories by EAR PHONE CONNECTION BULLDOG - THROAT MICROPHONE

With two vibration microphone pick-ups on either side of the throat, virtually no background noise can be heard. The unit can easily be worn with a gas mask or SCBA unit.

• Blocks background noise by picking up the vibrations of the user's vocal chords • Heavy duty construction featuring polyurethane rubbers and high impact polycarbonate plastics • Dual vibration microphone elements • Comfortable acoustic tube earphone complete with a soft Rubber Ear-Mold • Multiple Push-To-Talk buttons for various tactical setups

This unit is available with the Quick Release™ feature

The small PTT can be run down the sleeve and attached to your finger

The large PTT button can be used when wearing gloves. The junction box PTT can be worn on a utility belt.

ELECTRONIC EAR MUFFS

Head Office: 1-866-652-2877

TACTICALTM 7 STEREO NRR 24 DB

TACTICALTM 6 STEREO NRR19 DB

Enables you to hear warning signals, speech and other important sounds at up to three times greater distance than possible with other conventional active hearing protectors. • Protects from both continuous and impulse noise • Maximum amplification ca be incrementally adjusted down to the “off” position • Advanced electronics enable amplification of weak signals but will not exceed 82 dB(A) equivalent sound level. • Wide, soft padded headBand distributes weight while two-point suspension exerts low pressure for comfortable, long term use • Soft, liquid foam-filled ear cushions provide added comfort • Assists people with impaired hearing

The compact, folding electronic hearing protector electronically perceives and localizes weak sounds. • Excellent for hunting applications, and for persons with preexisting hearing loss • Impulse noise attenuated immediately • Features dual, stereo volume controls • Wide, soft padded headBand distributes weight while two-point suspension exerts low pressure for comfortable, long term use • Soft, liquid foam-filled ear cushions provide added comfort • Light weight 8.8 ounces • Four 1.5 V long life AAA batteries provide 200+ hours of service.

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VIDEO/AUDIO Video Microphone VIDMIC

FRONT

BACK

LEFT SIDE

RIGHT SIDE

Fully operational mic with 1 GB of memory:

(Replaces your existing shoulder mic & works with most radios) • Colour Video Recorder - 3 hours & up

• Audio Recorder - 3 hours & up

An upgrade to the advanced software package is available which will roll out in 3 phases. • The first phase is a file management system that will allow the department to keep track of all of its photos and video by officer, incident, case number and universal search.

“The incident that hits close to home for me is the Halloween 2006 firework incident were I instinctively drew my pistol for fear of my safety and others after being nearly hit by a Roman candle projectile. The VIDMIC would have shown the incident in its entirety and given the viewer the true picture of chaos the police and fire department experienced that night.” Oak Bay Police Constable

British Columbia, Canada

• Camera (still photos)

• The second phase will allow officers to send data back to headquarters wirelessly from the in-car laptop. • The third phase will allow the department to review data and stabilize the video, zoom in on the photo or video and clarify blurry footage.

The quality of video and photos are amazing. The mic takes away the “he said she said” issue we in the security industry always have to contend with. No longer can persons make false or misleading statements about our officer’s conduct. When this happens we just simply hand the video to police or show the complainant the actual transaction. This is usually enough to have them leave without further complaint. The Mics also encourage the individual officer to bring their level of professionalism to higher standards when dealing with all contacts. They know that their transactions can be viewed at any time. The videos captured have also become a valuable training and debriefing tool for our team. Security Supervisor Cornwall Centre, Regina, SK Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

EYE PROTECTION Eye Protection by WILEY X GOGGLE SERIES CQC • Low profile goggle that easily converts to ballistic spectacle • Optional Rx insert available • Meets VO ballistic impact test mil-prf-31013 • Meets ANSI high velocity impact standard

FITS HEAD SIZE: M–L 2 LENS PACKAGE Rx Plug In #WX 491X

491 / Smoke / Gloss Black Frame

WX 491 LENSES: Smoke / Clear FRAME: Gloss Black

Temples Included

FITS HEAD SIZE: M–L 2 LENS PACKAGE

SG-1 • First modular system created • Mil-prf-31013 ballistic certified • New Top Down™ ventilation system • Authorized for use by the U.S. and Danish military • Low profile, light weight, NVG compatible • Meets ANSI Z87.1-2003 high velocity standard

Temples Included

71 / Smoke / Matte Black Frame APEL (Authorized Protective Eyewear List)

71 New Top Down™ ventilation Lenses: smoke / clear Frame: matte black

FITS HEAD SIZE: L 2 LENS PACKAGE

WX PATRIOT • Largest goggle in series for maximum facial coverage • Meets mil-v-43511c ballistic requirement • First tactical goggle developed with removable Facial Cavity™ seal • Facial Cavity™ seal can be washed for prolonged life • More comfortable than standard tactical goggle • Rx insert adapts to Spear, and G-Eye

WX GOPATB LENSES: Smoke / Clear FRAME: Matte Black WX GOPATT LENSES: Smoke / Clear FRAME: Tan WX GOPATB / Smoke / Matte Black Frame

Rx Plug In WX CHXPST

70 v-cut™ (controlled ventilation) Lenses: smoke / clear Frame: matte black

WX GOPATG LENSES: Smoke / Clear FRAME: Foliage Green

Removable Facial Cavity™ Seal included, #WX GOPATF

FITS HEAD SIZE: M–L 2 LENS PACKAGE

SPEAR • New multi-functional goggle • Meets mil-v-43511c ballistic requirement • Symmetrical venting system keeps you fog free • 2.5mm lens provides 100% uv protection • Rx insert adapts to G-Eye, WX Talon, and WX Patriot • Low profile design that is NVG compatible

WX SP28T LENSES: Smoke / Clear FRAME: Tan WX SP28G LENSES: Smoke / Clear FRAME: Foliage Green

WX SP28 / Smoke / Matte Black Frame

Rx Plug In WX CHXPST for Spear

WX SP28 LENSES: Smoke / Clear FRAME: Matte Black

PROTECTIVE OPTICS LENS ANATOMY LA™ LIGHT ADJUSTING LENSES Darken as the brightness of the sun dictates. Darkest on bright days, clear on overcast days. Maximize optical clarity. Shatterproof. Light transmission: 85% to 17% (in sunlight).

SMOKE GREEN LENSES* Maximum glare reduction without distorting colors. Great for general daytime use. Light transmission: 21.09%, 19.03% Polarized.

SMOKE (GREY) LENSES* Maximum glare reduction. Won’t distort colors. Excellent in bright/glare conditions. Light transmission: 20.23%, 13.40% Polarized.

BRONZE BROWN LENSES For superior visual definition. Increase contrast, enhance ground level contours in most light conditions. Light transmission: 20.15%, 19.25% Bronze Flash, 19.05% Bronze Brown Flash.

CLEAR LENSES Maximum light transmission. See precise color values. Hazy or overcast, dusk/dawn conditions. Light transmission: 89.30%.

COPPER LENSES* Great lens to curb glare and enhance contrast of colors found in various global terrains. Light transmission: 18.17% Polarized.

LIGHT RUST LENSES Filters out blue light waves, the chief component of glare and haze. Enhance contrast in medium to low-light conditions. Light transmission: 53.23%.

SILVER FLASH MIRROR LENSES* Multi-coat, Z-Oxide mirror over smoke lens. Reduces glare. Excellent on bright days. Light transmission: 7.19%, 9.60% Polarized.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

EYE PROTECTION Eye Protection by WILEY X CHANGEABLE SERIES

G-EYE • New Zeiss® Voodoo™ lens technology provides clarity throughout field of vision • Conforms to facial contour extending peripheral vision • First ballistic eye shield with performance features across entire lens surface • Meets ANSI Z87.1-2003 high velocity safety standard • Exceeds the military’s stringent mil-prf-31013 ballistic standard • First ballistic shield designed for larger head sizes

FITS HEAD SIZE: L–XL 2 LENS PACKAGE WX CHGEY1 LENSES: Smoke/Clear FRAME: Matte Black 3 LENS PACKAGE WX CHGEY2 LENSES: Smoke/Clear/Light Rust FRAME: Matte Black

WX CHGEY2/Smoke/Matte Black Frame

Rx Plug-In WX CHX

FITS HEAD SIZE: M–L SINGLE LENS PACKAGE

XL-1 • No Tears™ system for total sun/sand/wind protection • Removable Ultra Foam™ gasket • Exceeds ballistic standard for spectacles mil-prf-31013 • Double injected temple tips for added stability • Exceeds ansi z87.1-2003+ safety • Changeable lenses provide all day protection

WX 297 LENSES: LA™ Light Adjusting Grey FRAME: Matte Black 2 LENS PACKAGE WX 291 LENSES: Smoke / Clear FRAME: Matte Black WX 291 / Smoke / Matte Black Frame

Removable Ultra Foam™ Gasket XLG included

FITS HEAD SIZE: S–M 2 LENS PACKAGE

PT-1 VIPER CUT • Smaller version of our popular PT-1 • Circular frame design cuts wind and debris • Newly developed nose bridge adjusts to fit any face • Meets ANSI Z87.1-2003 + military VO ballistic standards

WX PTR-1SC LENSES: Smoke / Clear FRAME: Matte Black 3 LENS PACKAGE WX PTR-1SCL LENSES: Smoke / Clear / Light Rust FRAME: Matte Black

Rx Plug In #PTX fits both PT-1 and PT-3 WX PTR-1SC / Smoke / Matte Black Frame

CLASSIC SERIES SABER™ • Excellent for indoor/outdoor shooting • Patented rubber saber tipped temples secure frames while training • Felt brow bar eliminates perspiration from eyes • Meets ANSI Z87.1-2003+ high velocity standard

FITS HEAD SIZE: M–L SINGLE LENS PACKAGE WX 302 LENSES: Smoke FRAME: Matte Black

WX 302 / Smoke / Matte Black Frame

Head Office: 1-866-652-2877

West: (604) 526-1631

WX 303 LENSES: Clear FRAME: Matte Black

Prairies: 1-866-652-2877

East: 1-877-993-9968

EYE PROTECTION Eye Protection by ESS PROFILE NVG™

THE MOST WIDELY-ISSUED GOGGLE BY THE U.S. MILITARY The patented ESS Profile NVG™ is the only compact military/tactical goggle system with no compromises. Created with direction from elite U.S. Special Forces groups, it has all the advantages of a low-profile, night-visioncompatible frame, without sacrifices in dust filtration, field of view, impact protection, or anti-fog performance.

Model Numbers: Foliage Green: #EP01FG1-MSR Desert Tan:

#EP01DT1-MSR

Black:

#EP01BK1-TSR

Includes: Two 2.8mm polycarbonate high-impact lenses (Clear & Smoke Gray), an anti-reflective SpeedSleeve™ and a protective soft case. NOW AVAILABLE: ACU Camo SpeedSleeves (with Foliage Green models only) • Authorized for use and issued by the U.S. Army, USMC & USAF • Low-profile design is compatible with night vision systems • 2.8mm impact-resistant lenses exceed ANSI Z87.1-2003+ and U.S. Military .22 caliber ballistic impact test MIL-V-43511C • Advanced ESS ClearZone FC™ anti-fog and anti-scratch lens coatings • Full-perimeter ventilation and filtration system minimizes lens fogging and filters airborne particles, dust, and splashes • Durable, smooth frame is easy to clean and conforms to any face shape • Prescription lenses fit into the P-2B™ Rx Insert; also compatible with the ESS ICE™ Eyeshields

Outrigger™ Strap System positions the strap for optimal compatibility with helmets.

RECOMMENDED ACCESSORIES:

Tear-off Lens Covers

Laser Protective Lenses P-2B™ Rx Lens Insert

SpeedSleeve™

ArticZone™ Dual-Thermal Lenses

LAND OPS™ THE MOST WIDELY-ISSUED GOGGLE FOR USE OVER PRESCRIPTION EYEWEAR

Model Numbers: Foliage Green #ESS01FG-MLR Desert Tan

The ESS Land Ops™ provides high-performance eye protection and exceptional fog resistance for active ground troops. It is one of the only goggles authorized by the U.S. Army for use over prescription eyewear.

#ESS01DT-MLR

Open-cell face padding for superior, long-lasting comfort

Includes: Two 2.4mm polycarbonate high-impact lenses (Clear & Smoke Gray) and an anti-reflective SpeedSleeve™, now available in ACU camo. Protective soft case available. NOW AVAILABLE: In Foliage Green & Desert Tan

RECOMMENDED ACCESSORIES:

• Authorized for use and issued by the U.S. Army • Full-perimeter Hi-Flow™ ventilation & filtration system ventilates humid air while filtering out airborne particles, air blasts, and splashes • Foliage Green or Desert Tan frames feature extra-soft face padding for superior comfort and a sealed fit • 40mm-wide, high-memory elastic strap features quick-adjust slides • 2.4mm impact-resistant lenses exceed ANSI Z87.1-2003+ and U.S. Military .22 caliber ballistic impact test MIL-V-43511C • 100% UVA/UVB protection • ESS ClearZone FC™ anti-fog & anti-scratch lens coatings • Roomy frame fits over most eyeglasses • Prescription lenses fit into the Striker™ Rx Insert

SpeedSleeve™

Striker™ Rx Insert Hi-Def Yellow Lens

Head Office: 1-866-652-2877

West: (604) 526-1631

Laser Protective Lenses

Prairies: 1-866-652-2877

ArticZone™ Dual-Thermal Lenses

East: 1-877-993-9968

EYE PROTECTION Eye Protection by ESS VEHICLE OPS™

The ESS Vehicle Ops™ goggle is designed for warfighters exposed to harsh environments while operating vehicles. It was selected as the award-winning goggle in the U.S. Army’s Combat Eye Protection (CEP) Solicitation. Low-Flow™ filtration provides the ultimate barrier against airborne debris while traveling at high speeds. This goggle is easy to maintain and as tough as the troops who use it. Includes: Two 2.4mm polycarbonate high-impact lenses (Clear & Smoke Gray) and an anti-reflective SpeedSleeve™. Protective soft case available. • Full-perimeter Low-Flow™ ventilation & filtration system venti-

• • • • • • •

lates humid air while filtering out airborne particles, air blasts, and splashes 40mm-wide, high-memory elastic strap features quick-adjust slides 2.4mm impact-resistant lenses exceed ANSI Z87.1-2003+ and U.S. Military .22 caliber ballistic impact test MIL-V-43511C Advanced ClearZone FC™ anti-fog & anti-scratch lens coatings 100% UVA/UVB protection Black durable frame is easy to clean and maintain Roomy frame fits over most eyeglasses Prescription lenses fit into the Striker™ Rx Insert

Model Numbers: Black

#ESS01BK-MCSR Closed-cell face padding is durable and easy to clean

RECOMMENDED ACCESSORIES:

SpeedSleeve™

Laser Protective Lenses Striker™ Rx Insert

Tear-off Lens Covers ArticZone™ Dual-Thermal Lenses

PROFILE TURBO FAN™ LOW-PROFILE, FAN-POWERED ANTI-FOG SYSTEM Already the preferred fan goggle of US Special Forces groups, the ESS Profile TurboFan™ is now better and tougher than ever. This improved fog-elimination system features the robust PowerPod™ battery pack with a push-button switch, now positioned near the back of the head for snag-free operation. A single AA battery powers the two-speed fan system for up to 150 hours of continuous operation, exhausting humidity to prevent lens fogging. The goggle frame is a variation of the ESS Profile NVG™ with extra face padding. Includes: Two 2.8mm polycarbonate high-impact lenses (Clear & Smoke Gray), an anti-reflective SpeedSleeve™, and a protective soft case. • Newly-designed PowerPod™ battery pack is extremely robust and water-resistant for all-weather operation • 2-speed push-button switch features patented new technology to provide constant fan speeds as battery power diminishes • Enhanced battery life runs for up to 150 hours on a single AA battery at low speed. “Auto-off” maximizes battery life • Improved TurboFan™ Blade Geometry is up to 5x more efficient than previous versions • Closed-cell face padding is durable, easy to clean, and ideal for extended comfort in all weather conditions • Low-profile design compatible with night vision systems • New: Now available in Foliage Green, Desert Tan & Black

2-speed PowerPod™ pushbutton switch has up to 150 hours of battery life.

Patented 2-speed TurboFan™ draws fresh air in through the goggle bottom and forces humid air out the top at up to 13,000 rpm

Model Numbers: Black #EP01BK1-CAM Foliage Green #EP01FG1-CAM Desert Tan #EP01DT1-CAM

RECOMMENDED ACCESSORIES:

Tear-off Lens Covers

ArticZone™ Dual-Thermal Lenses P-2B™ Rx Insert

SpeedSleeve™

Head Office: 1-866-652-2877

Laser Protective Lenses

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

EYE PROTECTION Eye Protection by ESS STRIKER TURBO FAN™ ANTI-FOG SYSTEM FOR EYEGLASS USERS The original Striker TurboFan™ offers 2-speed exhaust technology in a goggle that fits over most glasses. Now featuring the robust PowerPod™ battery pack with a push-button switch, made tougher and positioned near the back of the head for snagfree operation. A single AA battery powers the two-speed fan system for up to 150 hours of continuous-speed operation. Includes: Two 2.4mm polycarbonate high-impact lenses (Clear & Smoke Gray), an anti-reflective SpeedSleeve™, and a protective soft case. • Newly-designed PowerPod™ battery pack is extremely robust and water-resistant for all-weather operation • 2-speed push-button switch features patented new technology to provide constant fan speeds as battery power diminishes • Enhanced battery life runs for up to 150 hours on a single AA battery at low speed. “Auto-off” maximizes battery life • Improved TurboFan™ Blade Geometry is more efficient than previous versions • Soft face padding for superior comfort, absorption, and fit • 40mm durable elastic strap has rear buckle for quick release • 2.4mm impact resistant lenses exceed ANSI Z87.1-2003+ and U.S. Military .22 caliber ballistic impact test MIL-V-43511C • ESS ClearZone FC™ anti-fog and anti-scratch lens coatings • 100% UVA/UVB protection • Frame fits over most eyeglasses • Prescription lenses fit into the Striker™ Rx Insert

Model Number: #ESS01BK-CAM

2-speed PowerPod™ push-button switch has up to 150 hours of battery life .

Patented 2-speed TurboFan™ draws fresh air in through the goggle bottom and forces humid air out the top at up to 13,000 rpm.

ArticZone™ Dual-Thermal Lenses

Tear-off Lens Covers

Striker™ Rx Insert Laser Protective Lenses

PROFILE THERMAL™ TACTICAL THERMAL™

The Profile Thermal™ features a compact, low-profile frame for improved functionality with helmets, night vision equipment, and weapons sighting. Even in extreme temperatures, closedcell face padding provides extra comfort while the extra-thick ArcticZone™ dual-thermal lens ensures maximum resistance to impacts and lens fogging. Includes a protective soft case. Model Number: #EP02BK2-TFR

The Profile Thermal™ uses Profile™ Series accessories

Model Numbers: Tactical Thermal #ESS02BK-T Tactical SC Thermal #ESS02BK-TSC Tactical XT # ESS01BK-TXT

The Tactical Thermal™ is the benchmark goggle for tactical antifog performance. The ArcticZone™ dual-thermal lens provides outstanding fog resistance and impact protection in extreme temperatures. The 40mm strap has a rear buckle for quick release. Includes a protective pouch and Tear-Off Lens Covers. NIGHT-VISION COMPATIBLE

TACTICAL SERIES KEY FEATURES:

• ArcticZone™ dual-thermal anti-fog lenses for extreme temperatures (not included with Tactical XT™) • Impact-resistant lenses exceed ANSI Z87.1-2003+ and U.S. Military .22 caliber ballistic impact test MIL-V-43511C • 100% UVA/UVB protection • Replacement lenses available in Smoke Gray, Hi-Def Yellow, Clear, ArcticZone™ dual-thermal, and Laser Protective • Tactical Series frames fit over most eyeglasses • Prescription lenses fit into the Striker™ Rx Insert

TACTICAL SC THERMAL™

TACTICAL XT™ The Tactical XT™ is an economical high-performance goggle with all the core performance features of the ESS Tactical Series, without the accessories. Includes a ClearZone FC™ high-impact single lens. The 40mm strap has slides for easy strap adjustment.

Developed specifically for use with helmets, the Tactical SC Thermal™ features a slim 26mm strap and the patented Speed-Clip™ system for quick strap adjustment. Velcro® tabs secure strap to helmet. The ArcticZone™ dual-thermal lens provides outstanding fog resistance and impact protection in extreme temperatures. Includes a protective pouch and Tear-Off Lens Covers.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIRE FIGHTING Coldfire by FIREFREEZE

APPLICATION:

UNDERWRITERS LABORATORIES LISTING:

Cold Fire® can be added to pumper apparatus, reservoirs or inducted into fire hose lines in order to attack large fires. Cold Fire® is added at given percentages depending on the nature of the combustible material involved (Class A: 1-3% Class B: 3-6% Class D: 6-10%). It can also be used in water extinguishing units, closed loop systems, sprinkler systems, and on-board systems for aviation, rail, boating, and automobile industries

Cold Fire® is UL listed for Class A & B Fires. Listing # 2N75. Tested in accordance with NFPA 18, Standard for Wetting Agents, UL 162, applicable portions of the Standard for Foam Equipment and Liquid Concentrates, and UL 711 (For Class B fires). Cold Fire® is also ULC listed. File#: Cex1225. Product was investigated and found to be in compliance with the requirements under ULC Subj. C175 ENVIRONMENTAL PROTECTION AGENCY: Cold Fire® is registered by United States Environmental Protection Agency on their SNAP (Significantly New Alternative Products) Program Vendor List. Cold Fire® is classified by the US EPA under : "Surfactant Blend A". Cold Fire® is approved by the US EPA as a substitute for Halon 1211.

• • • • • • • • • • •

TOXICITY: Tested in accordance with US EPA Office of Pollution Prevention and Toxic Criteria for ranking the acute toxicity of chemicals in the aquatic environment, Cold Fire® is considered to be of LOW concern. Cold Fire® is NOT considered a skin sensitizing agent, a dermal, primary skin, or ocular irritant and is NOT acutely toxic to laboratory animals following oral administration at 5.0 g/kg.

•

Environmentally Safe Non Toxic & Non-Corrosive Biodegradable Rapid Cooling Effect UL Listed Wetting Agent Reduces the Density of Hydro carbon Smoke Possesses a Unique Thermal Enhances the Penetration of Water No Messy Cleanup Required Prevents Re-ignition Tested and Used by Professional Firefighters Worldwide Available in 5 and 55 Gallon Drums

HAZARDOUS MATERIALS IDENTIFICATION SYSTEMS RATINGS (HMIS): Health Hazard = 0 Reactivity = 0 Flammability = 0 12OZ. SPRAY CAN IS HANDY FOR:

GARAGES CARS

FIREPLACES BARNS TRAILERS

CAMPERS BOATS OFFICES

LIVESTOCK B-B-Q'S WOOD

PLASTICS PAPER LIQUIDS

GREASE OIL GASOLINE

APPLICATION: Cold Fire® can be added to pumper apparatus, reservoirs or inducted into fire hose lines in order to attack large fires. Cold Fire® is added at given percentages depending on the nature of the combustible material involved (Class A: 1-3% Class B: 3-6% Class D: 6-10%). It can also be used in water extinguishing units, closed loop systems, sprinkler systems, and on-board systems for aviation, rail, boating, and automobile industries TOXICITY: Tested in accordance with US EPA Office of Pollution Prevention and Toxic Criteria for ranking the acute toxicity of chemicals in the aquatic environment, Cold Fire® is considered to be of LOW concern. Cold Fire® is NOT considered a skin sensitizing agent, a dermal, primary skin, or ocular irritant and is NOT acutely toxic to laboratory animals following oral administration at 5.0 g/kg. ENVIRONMENTAL PROTECTION AGENCY: Cold Fire® is registered by United States Environmental Protection Agency on their SNAP (Significantly New Alternative Products) Program Vendor List. Cold Fire® is classified by the US EPA under : "Surfactant Blend A". Cold Fire® is approved by the US EPA as a substitute for Halon 1211. HAZARDOUS MATERIALS IDENTIFICATION SYSTEMS RATINGS (HMIS): Health Hazard = 0 Reactivity = 0 Flammability = 0

WHERE CAN ODOR SEAL® BE USED? Odor Seal® can be used in all areas/situations that produce an odor(s). Home, office, automobile, or boat. Use to eliminate tough pet, cooking, smoke, vomit, decay and musty/mildew odors. Can be used in HV/AC systems. INDUSTRIAL APPLICATIONS Sewage treatment plants, garbage dumpsters, trucks, and chutes, restaurants, landfills, public and portable toilets, compost facilities, zoos, kennels, holding tanks, fisheries, rendering plants, etc. Odor Seal® is also an effective degreasing agent. Excellent for use in restaurant grease traps. Odor Seal has also proven to be highly effective at removing hydrogen sulfide from mill and processing plants efficiently and at a cost effective rate. HOW IS ODOR SEAL® SOLD? It is available in 32 oz. refillable spray bottles. HOW IS ODOR SEAL® APPLIED? Odor Seal® can be applied using a pump spray bottle, portable spray unit, power washer, or can be induced into a misting system. Odor Seal® can also be added to wash water when cleaning floors, restrooms fixtures, food processing equipment and counter tops to eliminate odor and degrease the area.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BATONS & ACCESSORIES Batons by ASP TACTICAL BATONS®

The ASP Tactical Baton is the most tactically sophisticated impact weapon currently available to law enforcement personnel. Tested by the most elite federal teams, the ASP Baton has proven itself "virtually indestructible." The premium materials, exceptional workmanship and flawless function of the ASP Baton sets it apart from all others in quality, durability and performance.

F16 F21 F26

ASP Tactical Batons are available in F16, F21, and F26 configurations. BATON

F16

F21

F26

Airweight® (with Foamed Vinyl Grip)

2212

2412

2612

Black Chrome (with Foamed Vinyl Grip)

2211

2411

2611

Chrome (with Foamed Vinyl Grip)

2210

2410

2610

DuraTec® (Airweight with Injection Molded Grip)

2214

2414

2614

Electroless® (with Foamed Vinyl Grip)

2213

2413

2613

Federal® (Black Chrome with Injection Molded Grip)

2215

2415

2615

Gold (with Foamed Vinyl Grip)

2219

2419

2619

Foamed

Molded

Baton Grips are available in two styles. Molded Santoprene is permanently bonded to the baton handle. Foamed Vinyl is replaceable. Both provide a firm, durable hold.

*Airweight and DuraTec Batons weigh 45% less than steel models. They are not recommended for uniform duty use. Injection Molded DuraTec and Federal Grips are permanently bonded to the baton handle.

LEVERLOC BATONS These innovative new batons employ a heat treated extension mechanism. Four internal lugs provide a positive lockout. Eccentric retention grooves allow opposing locking lugs to cam free. Elegantly simple. Incredibly strong. Easily carried. Rapidly deployed. A new twist on retraction. L16B Black Chrome 72211 L16C Chrome 72210 L16E Electroless 72213 L21B Black Chrome 72411 L21C Chrome 72410 L21E Electroless 72413 L26B Black Chrome 72611 L26C Chrome 72610 L26E Electroless 72613

BREAKAWAYS® These window breakers can be attached between the cap and handle of any ASP Baton. Adds less than .75” to the baton length. The three ceramic tips of the BreakAway provide instant entry through any tempered glass window. Electroless

52922

Black

52923

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BATONS & ACCESSORIES Baton Accessories by ASP DUTY CASES

The Clip-On Executive and Snap-On Duty Cases hold Tungsten (1, 2) lights.

A new series of soft cases hold ASP (16, 21, 26) Batons or Triad (2, 3, 4) lights. All cases in the series feature elastic sides.

Tungsten 1 Executive

16.2 Black

32232

Ballistic

32235

Black Black

21.3 Black

32432

Ballistic

32435 32632

Ballistic

32635

45732

Tungsten 2 Duty

26.4 Black

35732

Tungsten 2 Executive

Black

55732

Ballistic

55735

BATON CAPS Logo Caps are available with 66 standard Prestige insignias including ASP Certification and operational specialty. Logos are offered in Brass or Nickel Silver.

Logo Band Caps are available with 18K (2100) or Silver (2300) Bands to accent the Tactical the Tactical Baton. Caps are produced for all Prestige insignias.

Brass Logo 41_ _

Gold Band 21_ _

Silver Band 23_ _

Grip Caps are designed to enhance retention. The Grip Cap is available in Electroless (2915), Textured Black (2916) and with Prestige insignias.

Wrist Strap Caps are designed for mounted units. The stainless steel cap incorporates a closed loop parachute cord wrist strap and adjustable ball slide.

Brass Logo 43_ _

2914

Leverage Caps lock the baton in the officer's hand improving retention and control. More important, this unique design transfers the fulcrum of the baton to the little finger increasing both speed to target and impact potential. With the Leverage Cap installed, an F16 has the impact of an F21. An F21 strikes like an F26. Available in Electroless (2920), Textured Black (2921), Gold Band (4700), Silver Band (4800) and with Prestige insignias.

Silver Logo 42_ _

Brass Logo 45_ _

Silver Logo 46_ _

Silver Logo 44_ _

Gold Band 47_ _

Silver Band 48_ _

It's A Matter of Pride...

R.C.M.P. Insignia End Caps from ASP. ASP Presentation Caps add a mark of distinction to any expandable baton. RCMP Brass cap, Gold band RCMP Brass cap, No band RCMP Silver cap, Silver band RCMP Silver cap, No band

ASA80126 ASA80131 ASA80239 ASA80297

2912

Prestige速 Logos Distinctive insignias are available in Brass, Nickel Silver or colour fill. They may be die struck on request for individual agencies or divisions.

Head Office: 1-866-652-2877

Swivel Caps were originally designed for Airweight and DuraTec batons. The cap attaches to any ASP expandable. The baton is carried inside the waistband and is completely concealed. Keys on the Detachable hang over the belt and are grasped for rapid presentation of the baton.

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BATONS & ACCESSORIES Baton Accessories by ASP SIDEBREAK速 SCABBARDS The Sidebreak Series retains a retracted or expanded ASP Baton. The patented release slot allows instant access to an expanded baton during a dynamic confrontation. Rotating Belt Loop scabbards are the duty standard for expandable batons. Available in four finishes, the scabbards rotate to 12 distinct positions. Plate & Paddle Sets include a Sidebreak carrier with an interchangeable Belt Plate and Paddle. The carrier can be locked in five distinct positions on each belt attachment.

Shown with Belt Plate installed.

Shown with Belt Paddle installed. SIDEBREAK SCABBARDS

F16

F21

F26

Rotating Belt Loop (Black)

2232

2432

2632

Rotating Belt Loop (Basketweave)

2233

2433

2633

Rotating Belt Loop (ASPtec)

2234

2434

2634

Rotating Belt Loop (Ballistic Weave)

2235

2435

2635

Plate & Paddle Set

2236

2436

2636

Rotating Clip-On

2237

2437

2637

Black

Basketweave

Ballistic Weave

ASPtec速

Rotating Clip-On scabbards are designed for military belts. Cases clip to any military belt and rotate to 12 distinct positions.

FEDERAL SCABBARDS The Federal Series retains a retracted or expanded ASP Baton. These cases are designed for those officers who prefer a closed front carrier.

Rotating Belt Loop scabbards are secure and light weight. The scabbards rotate to 12 distinct positions.

Plate & Paddle Sets include a Federal carrier with an interchangeable Belt Plate and Paddle. The carrier can be locked in five distinct positions on each belt attachment.

Shown with Belt Plate installed.

Head Office: 1-866-652-2877

West: (604) 526-1631

Shown with Belt Paddle installed.

Prairies: 1-866-652-2877

East: 1-877-993-9968

FEDERAL SCABBARDS

F16

F21

F26

Rotating Belt Loop

2238

2438

2638

Plate & Paddle Set

2239

2439

2639

BATONS & ACCESSORIES Baton Accessories by ASP TACTICAL DEFENDER速

Tactical Defenders combine the straight line activation system of the Defender OC with the proven dependability of the ASP Tactical Baton. Tactical Defender (only)

2854

OC Baton (Airweight速)

2420

OC Baton (Black Chrome)

2421

OC Baton (Chrome)

2422

OC Baton (Electroless速)

2423

O-Ring Sealed Connector

Safety Pin

Safety

Replaceable Insert

Precision Machined Dispersion Port

Tactical Defender

Activator

Aerospace Aluminum Body

Foam Vinyl Grip

Dispersion Cap

Defender Inserts are compact, easily replaced and date coded (Heat only) to assure reliability.

Palm Defender速 Inserts

Tactical Defender Inserts

Palm Defender Conversion Tube

ACCESSORIES

MAINTENANCE KITS ASP Batons and Scabbards may be rapidly serviced or repaired with a series of Maintenance Kits.

Prestige Cases (5402) are ideal for the presentation of specialized ASP Batons.

Tactical Mirrors (2471) are rapidly attached to any ASP Baton for drug, room clearance or security searches. They may also be purchased as a set with a fitted case (2470).

BATTERIES The Lithium Battery Stick was initially constructed by ASP for a government client. The design welds two CR123A PTC protected Lithium batteries together and packages them as a single unit to simplify handling and replacement. Stick

Head Office: 1-866-652-2877

Kit Armorer Repair F16 Grip F21 Grip F26 Grip F Series Grip Scabbard

03027

West: (604) 526-1631

Prairies: 1-866-652-2877

Code ASA35100 ASA35103 ASA35104 ASA35105 ASA35106 ASA35107 ASA35101

East: 1-877-993-9968

BATONS & ACCESSORIES OC by ASP KEYRING PROTECTION

The ASP Defender® Series is precision machined from high strength aerospace aluminum. They are light weight, low profile, easily carried and devastatingly effective. Bright dip industrial anodizing is accented by an injection molded Delrin safety. The solid brass keyring swivel retains two heat treated, black chrome plated split rings. Both the dispersion tip and retention cap are o-ring sealed. The safety is positive and secure. Release requires two distinct movements. Straight line activation places a cone-shaped spray on target...even in the dark. It provides two million Scoville Heat Units of Oleoresin Capsicum protection from replaceable aerosol inserts. Defenders are available in three sizes and a variety of finishes.

Product Code Cutaway 5202

To determine the product number of an ASP Defender, combine the first two numbers of the selected model with the last two numbers of the finish.

Blue _ _ 50 DEFENDER INSERTS

Heat

Test

Palm Defender

4910

4911

Key Defender®

5110

Street Defender®

5910

Heat

(Twin Pak)

Test

(Twin Pak)

Heat & Test

4912

4913

4914

5111

5112

5113

5114

5911

5912

5913

5914

Violet _ _ 51

(Twin Pak)

Pewter _ _ 52 Red _ _ 53

INSERT CASES provide convenient transport and storage of Defender Heat® and Test®. Cases are colour coded and crafted from molded leather with a slip cover. Palm Key Defender Defender 49 _ _ 51 _ _

Street Defender 59 _ _

Black _ _ 54 INSERT CASES Palm Defender Key Defender Street Defender Tactical Defender

Heat (Burgundy)

Test (Blue)

2890 2808 2801 2892

2891 2809 2802 2893

Gold _ _ 55 Electroless _ _ 56

Textured _ _ 57 18K Gold _ _ 58

MAINTENANCE KITS (5109) service the modular ASP Defender Series.

PRESTIGE CASES are ideal for presentation of a Palm Defender (5407) or Key Defender (5405)

OC SUPPORT KEY RETURN SYSTEMS are available in jewelers Brass or Nickel Silver. They provide lifetime postage paid return of lost keys. KEY TAGS Vigilance ROSE Eagle (Round) Eagle (Square)

2780

Brass

Nickel Silver

2780 2783 2786 2789

2781 2784 2787 2790

2783 2789 2786

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

DETACHABLES (2791) allow convenient separation of keys from a Defender.

HANDCUFFS & RESTRAINTS Handcuffs & Restraints by ASP HANDCUFFS ASP Tactical Handcuffs provide a major advance in both the design and construction of wrist restraints. Frame geometry is the result of extensive computer modeling and simulation analysis. Strength potential has been maximized through use of an interlocking, unitized frame. The cuff structure is forged from high strength stainless steel on custom built, high speed, progressive dies. Each restraint is then overmolded with ordnance grade polymer under 75 tons of pressure. The Lock Assembly is unitized and replaceable.

Chain Steel

A flat contact conical bow improves application. Complex "keyhole up" training procedures are no longer necessary. There is a keyway and double lock slot on each side of each restraint. A double lock warning bar is readily visible. Both double and single locks are released by turning the key in a single direction.

CHAIN

The frame geometry, deep set teeth and precision smooth action eliminates the need for back loading. Lock assemblies are readily replaced.

ASP Chain Handcuffs incorporate a stainless steel eyelet, TIG welded stainless steel links and a ball bearing smooth rotation. Each swivel is protected by a stainless steel reinforcing collar.

Chain Aluminum

Orange

Gray

Blue

High Security 2 Pawl (Blue) Lock Set Chain Chain Hinge Hinge

Pink

Yellow

Brown

Steel Aluminum Steel Aluminum

46101 46103 46111 46113

European 3 Pawl (Green) Lock Set Chain Steel 66101 Chain Aluminum 66103 Hinge Steel 66111 Hinge Aluminum 66113

SECURITY HANDCUFFS

employ 2 Pawl (Blue) High Security or 3 Pawl (Green) European replaceable Lock Sets. The 2 Pawl High Security lock employs a unique key that also opens any standard handcuff lock. The 3 Pawl European lock uses a standard key.

IDENTIFIER速 HANDCUFFS Identifier Chain and Hinge cuffs are produced in three tactical and three high visibility colours.

Hinge Steel

Hinge Aluminum

HINGE Tactical Hinge Handcuffs incorporate a four point stainless steel connection. The rivetless exterior design allows the cuffs to lie flat in a case or on the belt. The restraints provide increased control of the most resistant subjects.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs & Restraints by ASP HANDCUFFS

RIGID ASP Rigid Handcuffs are compact, ergonomic and strong. They lock open providing a palm swell for increased control and radiused edges to reduce injury potential.

Rigid Aluminum 46123

HANDCUFF CASES

Combo Case

Combo Cuff Cases carry a pair of Chain or Hinge Handcuffs together with an ASP Baton, Triad or Tungsten light. Double Cuff Cases carry two Chain or Hinge Cuffs in a stacked design.

Triad Black Triad Ballistic Tungsten Black Tungsten Ballistic

Black

Double Case 35631 35635 65732 65735

Basketweave

Black Basketweave Ballistic ASPtec

Ballistic

INVESTIGATOR CASES provide a low profile, pull through leather carrier for both Chain (6124) and Hinge (6125) restraints.

Head Office: 1-866-652-2877

West: (604) 526-1631

56160 56161 56162 56163

ASPtec

NYLON CASES present a light weight formed carrier (6123) that will accept either Chain or Hinge Tactical Handcuffs.

Prairies: 1-866-652-2877

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs keys by ASP HANDCUFF CASES Open Top Handcuff Cases are cornerstiched with a pull through retention strap. All cases are available in Black, Basketweave, Ballistic, and ASPtec finishes.

Chain Basketweave Front

Chain Duty Case with Basket Weave Chain Basketweave Back Open Top duty case

Black

Basketweave

Ballistic

CHAIN & HINGE CUFFS Open Top Black 6138 Basketweave 6139 Ballistic 6140 ASPtec (High Gloss) 6141

RIGID CUFFS Open Top Black Basketweave Ballistic ASPtec (High Gloss)

6168 6169 6170 6171

ASPtec

LOGO KEYS These swivel keys are available in two styles and six finishes with 67 standard die struck medallions. Heat treated for strength and back set for ease of insertion.

The BackSet design allows rapid location of the handcuff keyway.

Finish

Swivel 1

Swivel 2

Black Crome Electroless Gold Antique Copper Antique Brass

563_ 565_ 567_ 569_ 575_

564_ 566_ 568_ 570_ 576_

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs & Restraints by ASP TRI-FOLD速

ASP Tri-Fold Disposable Restraints are compact, easily carried and rapidly applied. Specifically designed to law enforcement standards, their wide, brightly colored straps have no sharp edges. Tri-Folds open to oversized loops of incredible strength.

6225

The Roller Loc速 ratchet has an extremely smooth pull with a covered locking mechanism. Available in sealed 6-Paks of high visibility Yellow (6190), tactical Black (6192) and training Red (6191).

Scarab速 Cutters snap onto a keyring. They remove restraints with compound leverage.

Recessed Identification Plate

6215

Tri-Fold Rings were designed in response to requests from elite US military units. An easily installed, rapidly removed, reusable device. This ring allows both Tri-Fold straps to be simultaneously set in place with one positive pull. (Six per package)

Clip Cases (6200) carry two Tri-Fold Restraints. They are rapidly attached and ideal for investigators.

Head Office: 1-866-652-2877

West: (604) 526-1631

Polycarbonate Retaining Block

Carabiners (6214) provide a light weight clip-on retainer that holds six Tri-Folds. (Two per package)

Prairies: 1-866-652-2877

East: 1-877-993-9968

Custom Formulated Polymer Straps

Roller Loc Retention System

Compact Foldable Design

Tri-Fold Duty Case holds three TriFolds

FLASHLIGHTS Flashlights by ASP

LED LIGHTS ASP Tungsten and Triad LED lights are the brightest hand held LEDs for their size in the industry. Advanced computer circuitry combined with Cree LEDs produce unmatched illumination tools for the discriminating professional. Tungsten 1 Cell 5701 2 Cell 5702 Triad 2 Cell 3 Cell 4 Cell Set

5620 5621 5622 5640

Executive Cases protect and securely retain the Tungsten

Polymer and nylon scabbards protect and securely retain the Triad

Parabolic Reflecting Chamber

Battery Circut Board

Battery Tube

O-Ring Seal

Computer Micro Switch

Lithium Power Cells are available in packs of 12

Lens Gasket Overmolded Activation Button

Lexan Lens High Output Cree LED LED Circut Board

Fine Line Knurling

Switch Circut Board

Softouch速 Switch

Three Position Rotary Collar

BATON LIGHTS Tactical Triad速 LED lights produce brilliant white illumination. They provide both a room filling halo and a penetrating central beam of incredible brightness. The rotational activation system for each light is positive and direct. Tactical Triad (only) LED Baton (Airweight) LED Baton (Black Chrome) LED Baton (Chrome) LED Baton (Electroless)

5601 2424 2425 2426 2427

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FLASHLIGHTS Flashlights by ASP WEARABLES

A new technology of personal lighting products, ASP Wearable Lights® are bright, reliable and conveniently clipped. Designed to be worn, not carried or left in the car. These award winning designs will become your constant companion. A Lifetime of Light...where and when you need it.

Blue – – 50

Available with intermittent (Sapphire Series) or 3Mode (Elite Series) switches. Choose from aluminum and translucent panels, vibrant ChromaColor designs or forged brass strikings. The lifetime LED produces a high efficiency, non-deteriorating solid state beam. It provides a soft illumination with a 180o viewing radius that is visible over one mile. This is a lighting system so advanced that it is guaranteed for life. These are the lights that started the revolution in LED technology.

Violet – – 51

Pewter – – 52

Exclusive Tri-Ring Clips feature a coil spring for smooth opening and automatic closing.

Red – – 53

LED Colours are brilliant and visible for over one mile. High visibility Blue, and true colour white.

30 _ _ Lifetime Crystals produce a high efficiency, non-deteriorating solid state beam.

34 _ _

Sapphire® lights combine a Softouch Intermittent switch with a choice of three LED crystal colours. Each light is bright and reliable.

Black – – 54

Gold – – 55

Silver – – 56

Textured – – 57

Product Code To determine the product number of an ASP Wearable Light, combine the first two numbers of the selected LED with the last two numbers of the desired panel number.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

18K Gold – – 58

FLASHLIGHTS Flashlights by ASP WEARABLES TRANSLUCENT PANELS

CRYSTAL CLEAR ILLUMINATION

Clear – – 01

Amber – – 02

38 _ _

Blue – – 03

Violet – – 04

Mirage lights offer a Softouch Intermittent switch and brilliant white LED with an energy system so reliable that it is guaranteed for life.

Red – – 05

Head Office: 1-866-652-2877

Product Code To determine the product number of an ASP Wearable Light, combine the first two numbers of the selected LED with the last two numbers of the desired panel number.

Green – – 06

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FLASHLIGHTS Lights by ICE LIGHT INTENSE COLOUR EMITTER

Applications: (consult your local authorities regarding color restrictions)

RED / BLUE ICE (model #cl-1201b) - flashes red & blue (Restricted to Law Enforcement Personnel Only)

AMBER / BLUE ICE (Model #CL-1203AB) - flashes Amber & Blue (Restricted to Law Enforcement Personnel Only) EMT & Fire Rescue

BLUE / WHITE ICE (Model #CL-1206BW) - flashes Blue & WHITE (Restricted to Law Enforcement Personnel Only)

Parking & traffic

WHITE ICE (Model #CL-1205W) - flashes Red & WHITE AMBER ICE (Model #CL-1207A) - flashes Amber & WHITE

D.U.I. check points

Special INFRA RED version (Model # CL-1209i) For use with night vision equipment. Features: Two operating patterns. Constant “ON” for Swat & SRT teams for room illumination, and flash mode for landing sites or signaling. *(aprox. operating time on a single battery: 4 hours)

Roadside hazards

“FOR NIGHTTIME TRAFFIC SAFETY” Available in FIVE different color combinations; for a variety of uses by Law Enforcement, Personal Safety, and Roadway Safety. Can be seen up to a mile away at night. Each model has three user selectable light patterns; a dual color flash combination in addition to a constant “ON” mode of each individual color. Other models include; INFRA RED; for signaling & room illumination for S.W.A.T. & C.E.R.T. Teams, and ULTRAVIOLET; for Document Authentication. The ICE LIGHT operates continuously on a standard 9 volt alkaline battery for up to *24 hours and contains 17 SUPER FLUX Light Emitting Diodes “LED’s” which have an expected life of more than 100,000 hours. ICE LIGHT has three user selectable flashing modes which rotate electronically in a 360° pattern offering maximum visibility. High intensity LED’s at the tip can also be used when demanding the attention of individual drivers. The ICE LIGHT is housed in a high impact plastic case with a non-slip rubber grip and includes a heavy duty nylon holster and vehicle mounting kit. ICE LIGHT is only 7.9 inches long and weighs only 6.6 ounces, it is water resistant and will float in water with the lighted side protruding upward.

Options: ULTRAVIOLET (- UV) This option can be ordered on any model (except Infrared) and can be used to authenticate documents such as drivers licenses, passports, currency, credit cards, or any documents which contain florescent inks which are illuminated by an Ultraviolet light source. Applications also include theme parks, night clubs, sporting events etc.., when UV inks are used with a stamp pad to mark the hand to verify reentry under a black light. Accessories: TRAFFIC CONE ADAPTER (Model #TE300C) for attaching the ICE Light to the top of a traffic cone (See picture at left) Each Model Features: Alternating high intensity colored LED’s in a 3601 pattern • Three user selectable light modes; 1st mode - dual flashing colors; 2nd & 3rd modes: each color is selected individually for “constant on” • Length: 7.9 inches long • weight: 6.6 ounces • Visual indicator for low battery • High impact ABS case sealed with water tight gaskets • Includes: Lanyard, Belt Holster, 9V Alkaline Battery and Vehicle Mounting Kit • 3 year manufacturers warranty • Protected by US Design Patent No. D410,399

Use to mark helicopter landing sites IR ICE LIGHT7 when used with night vision equipment, in the constant “ON” mode, will illuminate a room for S.W.A.T & S.R.T teams.

Ultraviolet ICE LIGHT7 can be used to authenticate documents such as drivers licenses, passports, currency, and credit cards.

Construction zones

Lights by EFLARE SAFETY BEACON SAFETY IN A FLASH • 360° high visibilty LED beacon • Portable, safe & easy to use • Up to 80 hours battery life • Tough & dependable

APPLICATIONS • Emergency Services - Police, Fire, Rescue and Ambulance • Traffic Management /Accident Warning • Trucking / Transport EFLARE 400 SERIES: Consumer Model • Roadside Breakdown • Rubber Base Included • Industrial Safety / Spill Kits • Orange Body Colour • Helicopter Landing Zones • 4 LED’s (light emitting diodes) Private, Commercial and • Single Color Flashing Military • Red or Amber • Mining • Personal and Family EFLARE 500 SERIES: Professional Model Protection • Rubber Base Included • Flouro Yellow Body Colour • 4 / 8 / 16 LED’s (model dependant) • Single Color Flashing • Dual Color Flashing • Single Color Steady On • Low Battery Indicator Professional Model • Hazmat Models Available

West: (604) 526-1631

Prairies: 1-866-652-2877

PATENTED FRESNEL LENS to maximize horizontal and vertical beam conspicuity, visible at two kilometers

FAILSAFE POSITIVE ACTIVATION MICROSWITCH to prevent accidental turning off or on of beacon

ADVANCED BATTERY PROTECTION SYSTEM to protect circuits and batteries from shock if the beacon is dropped

REFLECTIVE STRIP AND FLUORO BODY to maximise visibilty, day or night

IMPACT RESISTANT ABS BODY to maximize toughness and durability of beacon

HIGH STRENGTH CLIPS to permit attachment of beacon to cones, signs, belts or vehicle windows

PRECISION O-RINGS to ensure beacon is waterproof, dustproof and safe to operate in hazardous areas. HARD RUBBER BASE detaches if stuck by vehicle, so as to minimize damage to the beacon

Head Office: 1-866-652-2877

LOW BATTERY INDICATOR to show when the D cell batteries need to be replaced

SHATTERPROOF POLYCARBONATE LENS to ensure maximum clarity, strength, durability and shock resistance

East: 1-877-993-9968

IMPACT RESISTANT ABS CAP

flashlights Flashlights by STREAMLIGHT 2AA propolymer®

Battery Industrial rechargeable nickel-cadmium power cell; can be recharged up to 1,000 times on 100V, 120V, 230V or 240V AC or 12V DC. lens Unbreakable polycarbonate lens with scratch-resistant coating. light source Xenon gas-filled bi-pin bulb which is many times brighter than conventional flashlights. light output Up to 4,500 Peak beam candlepower. Bulb Rating: 9 Lumens typical case MATERIAL Virtually indestructible, non-conductive Polymer with a non-slip grip that is comolded into the case. Features a rubber face cap for impact and shock resistance. Available in yellow. WEIGHT (WITH BATTERY) 3.7 oz (104.90 grams) dimensions Length: 6.06 in. Major Diameter: 1.30 in. (3.30 cm) Body Diameter: 0.83in. (2.11 cm) RUN TIME Up to 4 hours continuous run.

3c/3c-led propolymer®

3c propolymer® luxeon

Battery Three (3) “C” size alkaline batteries. (Not included with purchase) lens Unbreakable polycarbonate lens with scratch-resistant coating. light source 3.7 volt , 785 mA Xenon gas-filled module. 100,000 hour life LEDs. light output Xenon Module: Up to 16,000 Peak beam candlepower. Bulb Rating: 50 Lumens typical. LED Rating: 43 Lumens typical (10 white LEDs). case MATERIAL Virtually indestructible, non-conductive Polymer with a rubber face cap for impact and shock resistance. Available in yellow and black-LED model, yellow only xenon model.

Battery Three (3) “C” size alkaline batteries. lens Unbreakable polycarbonate lens with scratch-resistant coating. light source One (1 Watt) Super High Flux Luxeon LED, 10,000 hour LED life light output Bulb Rating: 40 Lumens typical (LED) Up to 3,500 Peak Beam Candlepower case MATERIAL Impact resistant Engineering Polymer resin. Available in yellow and black. The lens cover is made from the same impact resistant polymer as the body.

WEIGHT (WITH BATTERY) 13.5 oz (382.73 grams)

WEIGHT (WITH BATTERY) 0.94 pounds (426.40 grams) 0.48 pounds (217.73 grams)

dimensions Length: 8.55 in. (21.72 cm) Major Diameter: 1.95 in. (4.95 cm) Body Diameter: 1.48 in. (3.76 cm)

dimensions Length: 9.30 in. (23.62 cm) Major Diameter: 2.0 in. (5.08 cm) Body Diameter: 1.48 in. (3.76 cm)

RUN TIME Up to 5.5 hours continuous run time with Xenon module. Up to 336 hours continuous run time with LED’s.

RUN TIME 5.5 hours continuous at full intensity. 2 additional hours of declining useable output.

propolymer accessories:

Unique tailcap and bezel switching minimizes two handed operation.

lens Unbreakable polycarbonate lens with scratch-resistant coating. light source 3-Watt Xenon Bulb with 30 hour life Three 100, 000 Hour lifetime Hi intensity LEDs light output Xenon Bulb – up to 16,000 Peak beam candlepower, Bulb Rating: 50 Lumens typical. LED Rating:13 Lumens Typical. (3 LEDs) case MATERIAL Lightweight, super-tough nylon polymer case designed with non-slip rubber comfort grip. Available in black, yellow, orange. O-ring sealed. WEIGHT (WITH BATTERY) 0.92 lbs (0.34 grams) dimensions Length: 10.92 in. (27.74 cm) Head Diameter 2.5 in. (6.35 cm) Body Diameter: 1.5 in. (3.81 cm) RUN TIME Xenon only: 5.5 hours continuous. LEDs only: 300 plus hours. Emergency back up LED (after full Xenon run): 1 hour minimum

Hoster

Safety Wands (3C-XP, 4AA, 4AA LED, 4AA Luxeon)

Battery Three (3) C alkaline batteries

Ring Holder (3C-XP)

Xenon ProPolymers Extremely bright xenon bulbs combined with computer-designed reflectors provide an unmatched brightness.

LED ProPolymers Streamlight’s state-of-the-art, lifetime LEDs allow a battery life 20 times longer than standard flashlights.

3c-xp®

Rubber Helmet Strap

Helmet Clamps (2AA, 4AA, 4AA LED, 4AA Luxeon)

Soft, elastomer grip ensures a firm hold.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT 3n propolymer®

4AA propolymer®

4AA propolymer® led

4AA propolymer® luxeon®

Battery Four (4) “AA” size alkaline batteries.

lens Unbreakable polycarbonate lens with scratch-resistant coating.

light source 100,000 hour life LEDs

light source One (1 Watt) Super High Flux Luxeon LED, 10,000 hour LED life

Battery Four (4) “AA” size alkaline batteries. Battery Three “N” size alkaline batteries.

lens Unbreakable polycarbonate lens with scratch-resistant coating.

light source 4.8 volt Xenon gas-filled module

light source 100,000 hour life LEDs. light output 12 Lumens typical (3 white LEDs).

light output Xenon Module - Up to 11,000 Peak beam candlepower. Bulb Rating: 34 Lumens typical.

case MATERIAL Impact resistant polymer body and face cap. Available in yellow and black.

case MATERIAL Impact resistant polymer. Features a rubber face cap for impact and shock resistance. Available in yellow only.

WEIGHT (WITH BATTERY) 2.1 oz (59.54 grams)

WEIGHT (WITH BATTERY) 6.3 ounces

dimensions Length: 5.25 in. (13.33 cm) Major Diameter: 0.96 in. (2.44 cm) Body Diameter: 0.69 in. (1.75 cm)

dimensions Length: 6.5 in. (16.51 cm) Diameter: 1.63 in. (4.14 cm) Width: 1.34 in. (3.40 cm)

RUN TIME Up to 120 hours continuous runtime.

RUN TIME Up to 4 hours continuous run time with Xenon module.

3 LEDs

light output LED Rating: 27 Lumens typical (7 white LEDs) case MATERIAL Impact resistant polymer. Features a rubber face cap for impact and shock resistance. Available in yellow and black. WEIGHT (WITH BATTERY) 7.52 ounces dimensions Length: 6.5 in. (16.51 cm) Diameter: 1.63 in. (4.14 cm) Width: 1.34 in. (3.40 cm) RUN TIME Up to 155 hours with LEDs. 7 LEDs

light output Bulb Rating: 40 Lumens typical (LED) Up to 3,500 Peak Beam Candlepower case MATERIAL Impact resistant Engineering Polymer resin. Available in yellow and black.The lens cover is made from the same impact resistant polymer as the body. WEIGHT (WITH BATTERY) 7.52 ounces (213.06 grams) 4.00 ounces (113.40 grams) dimensions Length: 7.00 in. (17.78 cm) Body thickness: 0.97 in. (2.46 cm) Width: 1.35 in. (3.43 cm) Facecap diameter: 1.69 in. (4.29 cm) RUN TIME Up to 4 hours continuous run time at full intensity. 2 additional hours of declining useable output.

Three 100,000 hour LEDs never replace a bulb again. Seven, "solid-state", unbreakable LEDs.

Push-button switching for one-hand operation.

Head Office: 1-866-652-2877

West: (604) 526-1631

Rugged engineered polymer for a lifetime of use.

Prairies: 1-866-652-2877

East: 1-877-993-9968

Waterproof.

flashlights Flashlights by STREAMLIGHT stinger®

stinger xt®

Battery 3-Cell, 3.6-Volt Nickel-cadmium sub-C battery is rechargeable up to 1000 times

lens Unbreakable polycarbonate lens with scratch-resistant coating.

light source Xenon gas-filled bi-pin bulb, with a spare stored in the end cap, variable spot to flood beam with 30-hour life

light source Xenon gas-filled bi-pin bulb, variable spot to flood beam with 30-hour life.

light output Up to 15,000 Peak beam candlepower. Bulb Rating: 125 Lumens typical case MATERIAL Machined aluminum housing that is anodized against corrosion inside and out. WEIGHT (WITH BATTERY) 10 ounces (284 grams) dimensions Length: 7.38 in. (18.7 cm) Major Diameter: 1.60 in. (4.06 cm) Body Diameter: 1.08 in. (2.74 cm) RUN TIME Up to one hour of continuous use.

light output Up to 15,000 Peak beam candlepower. Bulb Rating: 125 Lumens typical case MATERIAL Machined aluminum with non-slip rubberized comfort grip. WEIGHT (WITH BATTERY) 11.1 oz (315 grams) dimensions Length: 7.70 in. (19.56 cm) Major Diameter: 1.60 in. (4.06 cm) Body Diameter: 1.15 in. (2.92 cm) RUN TIME Up to one hour of continuous use.

Stinger® DS LED

CASE MATERIAL: 6000 series machined aircraft aluminum with non-slip rubberized comfort grip and anti-roll rubber ring. DIMENSIONS: Length: 8.85 in. (22.48 cm) Diameter: Major Diameter: 1.62 in. (4.11 cm) Body Diameter: 1.17 in. (2.97 cm) WEIGHT: 12.8 oz (352 grams)* LENS: Unbreakable polycarbonate lens with scratch-resistant coating LIGHT SOURCE: 3W shock-proof super high flux LED with a 20,000 hr lifetime LIGHT OUTPUT: 80 Lumens typical. Deepdish parabolic reflector produces a long range targeting beam with optimum peripheral illumination ON/OFF: Dual switch technology: Indepently working push button tailcap switch or head swich. Access any of the three variable lighting modes and strobe via the tail cap or the head-mounted switch.

stinger Hp™

stinger xt Hp™

Battery 3-Cell, 3.6-Volt Nickel-cadmium sub-C battery is rechargeable up to 1000 times

lens Unbreakable polycarbonate lens with scratch-resistant coating.

light source Xenon gas-filled bi-pin bulb. Variable spot to flood beam with 30-hour life

light source Xenon gas-filled bi-pin bulb, variable spot to flood beam with 30-hour life.

light output Up to 40,000 Peak beam candlepower. Bulb Rating: 120 Lumens typical

light output Up to 15,000 Peak beam candlepower. Bulb Rating: 125 Lumens typical

case MATERIAL Machined aluminum housing that is anodized against corrosion inside and out.

case MATERIAL Machined aluminum with non-slip rubberized comfort grip.

WEIGHT (WITH BATTERY) 12.2 oz (345.9 grams)

WEIGHT (WITH BATTERY) 11.1 oz (315 grams)

dimensions Length: 8.25 in. ( 21 cm) Major Diameter: 2.37 in. (6.02 cm) Body Diameter: 1.08 in. (2.74 cm)

dimensions Length: 7.70 in. (19.56 cm) Major Diameter: 1.60 in. (4.06 cm) Body Diameter: 1.15 in. (2.92 cm)

RUN TIME Up to one hour of continuous use.

Stinger® LED

RUN TIME: High brightness: Up to 1.75 continuous hours; Medium brightness: Up to 3.5 continuous hours;Low or Strobe: Up to 5.5 hours CHARGING: 3-Cell, 3.6-Volt Nickelcadmium sub-C battery is rechargeable up to 1000 times Ten hours to fully recharge on 100V, 120V, 230V or 240V AC, or 12V DC; 2.5-hour fast charger or FEATURES: PiggyBack® charger model available • Dual switch technology • Anti-roll ring included • LED charge-continuity indicator, compact • Snap-in charger holder that mounts in any position • Serialized for positive identification APPROVALS**: Most models meet applicable European Community Directives. WARRANTY: Limited lifetime warranty

CASE MATERIAL: 6000 series machined aircraft aluminum with non-slip rubberized comfort grip and anti-roll rubber ring. DIMENSIONS: Length: 8.41 in. (21.36 cm) Diameter: Major Diameter: 1.62 in. (4.11 cm) Body Diameter: 1.17 in. (2.97 cm) WEIGHT: 12.4 oz (352 grams)* LENS: Unbreakable polycarbonate lens with scratch-resistant coating LIGHT SOURCE: 3 Watt super high flux LED, impervious to shock with a 20,000 hour lifetime. LIGHT OUTPUT: 80 Lumens typical. Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination. ON/OFF: Multi-function, easy access pushbutton switch designed for extremely long life; testedat 1 million actuations.

Head Office: 1-866-652-2877

West: (604) 526-1631

RUN TIME: High brightness: Up to 1.75 continuous hours; Low brightness: Up to 6 continuous hours; Strobe: Up to 6 continuous hours BATTERY: 3-Cell, 3.6-Volt Nickel-cadmium sub-C battery is rechargeable up to 1000 times CHARGING: Ten hours to fully recharge on 100V, 120V, 230V or 240V AC, or 12V DC, 2.5-hour fast charger or PiggyBack® charger model available. FEATURES: • Anti-roll ring included • LED charge-continuity indicator, compact • Snap-in charger holder that mounts in any position • Serialized for positive identification APPROVALS**: Most models meet applicable European Community Directives. WARRANTY: Limited lifetime warranty

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT polystinger®

ultrastinger®

strion™

Battery 6 volt nickel-cadmium 5 cell sub-C battery is rechargeable up to 1,000 times

Battery Lithium Ion with on-board safety control circuit, 3.75 Volts, 2000 mAh minimum (WT = .11 lbs.), rechargeable up to 300 times

lens Unbreakable polycarbonate lens with scratch-resistant coating.

Battery 3-Cell, 3.6-Volt Nickel-cadmium sub-C battery is rechargeable up to 1000 times lens Unbreakable polycarbonate lens with scratch-resistant coating. light source Xenon gas-filled bi-pin bulb, with a spare stored in the end cap, variable spot to flood beam with 30-hour life

light source 30 hour life xenon halogen gas-filled bi-pin bulb. Variable spot to flood beam. light output Up to 75,000 Peak beam candlepower. Bulb Rating: 295 Lumens Typical case MATERIAL Machined aircraft aluminum that is anodized against corrosion inside and out. WEIGHT (WITH BATTERY) 16.1 oz (500 grams)

light output Up to 15,000 Peak beam candlepower. Bulb Rating: 125 Lumens typical

dimensions Length: 11.75 in. (30 cm) Major Diameter: 2.37 in. (6.02 cm) Body Diameter: 1.08 in. (2.74 cm)

case MATERIAL Super-tough, non-conductive nylon polymer with non-slip grip, available in yellow, black.

RUN TIME Up to one hour of continuous use.

WEIGHT (WITH BATTERY) 8.7 oz (247 grams) dimensions Length: 7.34 in. (18.7 cm) Major Diameter: 1.67 in. (4.24 cm) Body Diameter: 1.15 in. (2.92 cm)

12V DC Charge Cords

STRION TACTICAL SYSTEM

lens Borofloat High Temperature Glass

RECHARGEABLE WEAPONS-MOUNTED LIGHT

light source 3.6 Volt, 6.12 Watt, 1.7A (type T-1½ ), xenon gas-filled, Bi-Pin bulb; spare lamp in the tailcap

Rail mount fits long guns with 1913 (Picatinny-style) rails

light output Up to 12,000 Peak Beam Candlepower, Bulb Rating: 116 Lumens Typical

Serrated tail cap and extended push button for easy one-handed operation

case MATERIAL Machined Aircraft Aluminum with anodized finish

Lithium Ion battery recharges in the light

Grooved barrel for superior mount retention

Xenon gas-filled bi-pin bulb

WEIGHT (WITH BATTERY) 0.29 lbs. (8.22 grams)

12,000 candlepower adjustable focus beam

dimensions Length: 5.3 in. (13.46 cm) Head diameter: 1.25 in. (3.18 cm) Barrel diameter: 0.945 in. (2.40 cm)

strion accessories: Colour Filters

RUN TIME 70 minutes continuous use between charges

Strion Fast Charger

100V, 120V, 230V, 240V AC Charge Cords

RUN TIME Up to one hour of continuous use.

Holsters

stinger accessories:

Recgargeable Batteries

Infrared Lens Coloured Lens

5 unit Bank "Smart" Fast Charger, 120V or 230V AC

Ring Holder

HP Upgrade Kit Ultra-Head Upgrade Kit

5 unit Bank Charger, 120V or 230V AC

Battery Sticks Safety Wands Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

HP & Ultra-Head Upgrade Kits Convert your Stinger and Stinger XT flashlights into HP – High Performance Stingers. Increases their candlepower from 15,000 to 40,000. The Ultra-Head Kit converts your SuperStinger into a 75,000 candlepower UltraStinger. East: 1-877-993-9968

TactCap™ New tailcap design for quick, easy momentary operation Safety Wands

flashlights Flashlights by STREAMLIGHT SL-20X™

SL-20Xp™

SL-20Xp™-led

SL-35X™

Battery Industrial rechargeable nickel-cadmium power cell; can be recharged up to 1,000 times on 100V, 120V, 230V or 240V AC or 12V DC.

Battery High-capacity sub-C nickel-cadmium rechargeable battery can be recharged up to 1,000 times on 100V, 120V, 230V, 240V AC or 12V DC.

Battery High-capacity sub-C nickel-cadmium rechargeable battery can be recharged up to 1000 times on 100V, 120V, 230V, 240V AC or 12V DC

Battery Industrial rechargeable nickel-cadmium power cell; can be recharged up to 1,000 times on 100V, 120V, 230V or 240V AC or 12V DC

lens Unbreakable polycarbonate lens with scratch-resistant coating.

light source 10-watt, 6-volt quartz-halogen with tungsten filament with 100 hour lifetime.

light source 8-watt, 6-volt halogen bulb with a 100 hour lifetime.

light source 8-watt, 6-volt Halogen Bulb with 100 hour lifetime. 3 High Intensity LED’s with 100,000 hour Lifetime

light source 20-watt, quartz-halogen with tungsten filament.

light output Up to 30,000 pre-focused Peak beam candlepower, Bulb Rating: 200 Lumens Typical case MATERIAL Machined aircraft-grade aluminum with anodized finish. WEIGHT (WITH BATTERY) 1.9 lbs. (.86 kg) dimensions Length: 13 in. (33 cm) Major Diameter: 2.5 in. (6.35 cm) Body Diameter: 1.50 in. (3.81 cm) RUN TIME Up to 1.5 continuous hours

SL-20X™ -led

Battery High-capacity sub-C nickelcadmium rechargeable battery can be recharged up to 1000 times on 100V, 120V, 230V, 240V AC or 12V DC lens Unbreakable polycarbonate lens with scratch-resistant coating. light source 10-watt, 6-volt Halogen Bulb with 100 hour lifetime. 3 High Intensity LED’s with 100,000 hour Lifetime light output Halogen – up to 38,000 Peak Beam candlepower, Bulb Rating: 200 Lumens typical LED Rating: 13 Lumens typical (3 LEDs)

light output Up to 30,000 pre-focused Peak beam candlepower, Bulb Rating: 200 Lumens Typical case MATERIAL Lightweight, super-tough nylon polymer case is designed with nonslip foam comfort grip. Available in high visibility yellow, safety orange or non-glare black. WEIGHT (WITH BATTERY) 1.9 lbs. (.86 kg) dimensions Length: 13 inches (33 cm) Major Diameter: 2.50 in. (6.35 cm) Body Diameter: 1.50 in. (3.81 cm) RUN TIME Up to 1.5 continuous hours for an 8-watt lamp.

light output Halogen – up to 28,000 Peak Beam candlepower typical, Bulb Rating: 150 Lumens LED Rating: 13 Lumens Typical (3 LEDs) case MATERIAL Lightweight, super-tough nylon polymer case designed with non-slip rubber comfort grip. Available in high visibility yellow, safety orange or nonglare black. WEIGHT (WITH BATTERY) 1.1 lbs (0.41 Kg) dimensions Length: 13.2 in. (33.53 cm) Major Diameter: 2.50 in. (6.35 cm) Body Diameter: 1.50 in. (3.81 cm)

light output Up to 40,000 pre-focused Peak beam candlepower, Bulb Rating: 400 Lumens Typical case MATERIAL Length: 17.5 in. (44.5 cm) Major Diameter: 2.50 in. (6.35 cm) Body Diameter: 1.50 in. (3.81 cm) WEIGHT (WITH BATTERY) 2.8 lbs. (1.27 kg) dimensions Length: 13 inches (33 cm) Major Diameter: 2.50 in. (6.35 cm) Body Diameter: 1.50 in. (3.81 cm) RUN TIME Up to 1.5 continuous hours.

RUN TIME Halogen only – 1.5 hours continuous. LED’s only – 40 hours. Emergency back up LED (after full halogen run) – 1 hr minimum

SL Series Accessories

case MATERIAL Machined Aircraft-Grade aluminum flashlight with Type II anodized finish.

Lamp Module

WEIGHT (WITH BATTERY) 1.7 lbs (0.77 Kg) dimensions Length: 13.2 in. (33.53 cm) Major Diameter: 2.50 in. (6.35 cm) Body Diameter: 1.50 in. (3.81 cm) RUN TIME Halogen only – 80 minutes continuous. LED’s only – 40 hours. Emergency back up LED (after full halogen run) – 1 hr minimum

Charge Sleeves 5 Uunit Bank Charger, 120V or 230V AC

100V, 120V, 230V & 240V AC and 12V DC charge cords

Battery Sticks

Ring Holder Deluxe Holster

Head Office: 1-866-652-2877

West: (604) 526-1631

Safety Wands

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT vulcan®

fire vulcan®/led

Battery Zero-maintenance 4.5Ah sealed lead acid operates up to 3.25 hours per charge and is rechargeable up to 500 times. Red and green LED’s give charge status feedback. lens Unbreakable polycarbonate lens with scratch-resistant coating. light source High-intensity halogen bi-pin bulb available in 8 watt spot. Xenon dual filament 8 watt safety bulb features instant backup beam. light output Halogen-Bi-pin bulb: 8 watt spot = Up to 80,000 Peak beam candlepower. Bulb Lumens:150 typical. Xenon - Dual Filament: 8 watt spot = up to 70,000 Peak beam candlepower each. Bulb Lumens:157 typical. case MATERIAL High-impact ABS thermoplastic housing with rubberized cushioned-grip handle. WEIGHT (WITH BATTERY) 3.3 lbs (1.5 kg) dimensions Length: 7.50 in. (19.05 cm) Width: 5 in. (12.70 cm) Height: 6.50 in. (16.51 cm) RUN TIME Up to 3.25 hours per charge

VULCAN ACCESSORIES: Fire Charging Pack Charging Pack Battery

litebox®

Battery Zero-maintenance 4.5 Ah sealed lead-acid battery rechargeable up to 500 times.

CASE MATERIAL: High-impact ABS thermoplastic housing with rubberized cushioned-grip handle. DIMENSIONS: Length: 7.50 in. (19.05 cm) Width: 5 in. (12.7 cm) Height: 6.50 in. (16.51 cm) WEIGHT: 3.3 lbs (1.5 kg) with battery LIGHT SOURCE: High-intensity halogen bi-pin 8 watt spot with 100 hour life time, and (2) two ultra bright Blue LEDs. LIGHT OUTPUT: Up to 80,000 Peak Beam Candlepower (8W spot bi-pin bulb) Bulb Rating: 150 Lumens Typical Zero-maintenance 4.5 Ah sealed lead-acid battery rechargeable up to 500 times. BATTERY/RUN TIME: Up to 3 hours (Steady Halogen and LEDs) Up to 6 hours (Blinking Halogen and LEDs) Up to 60 hours (LEDs only) Standard System - Includes quick release buckle strap, charging rack and both AC and DC chargers. MODELS: Vehicle Mount System - Includes quick release buckle strap and 12 V DC vehiclemountable direct wire charging rack. • Factory Mutual (FM) approved for Class l, ll, Ill, Division 2. • Canadian Standards Association (CSA) certified for Class I, II, Division 2; Class III. APPROVALS**: • Rack meets requirements of NFPA 1901-12-1.7 (1999) mounted in any position. • Most models meet applicable European Community Directives and ATEX Zone 2 WARRANTY: Limited lifetime warranty.

lens: Unbreakable polycarbonate lens with scratch-resistant coating. light source High-intensity halogen bi-pin 8 watt spot with 100 hour life time, and (2) two ultra bright Blue LEDs. light output Up to 80,000 Peak Beam Candlepower utilizing 8 watt spot bi- pin bulb. Bulb Rating: 150 Lumens Typical case MATERIAL: High-impact ABS thermoplastic housing in high-visibility orange with rubberized cushioned-grip handle. WEIGHT (WITH BATTERY) 3.3 lbs (1.5 kg) dimensions: Length: 7.50 in. (19.05 cm) Width: 5 in. (12.7 cm) Height: 6.50 in. (16.51 cm) RUN TIME Up to 3 hours (Steady Halogen and LEDs) Up to 6 hours (Blinking Halogen and LEDs) Up to 60 hours (LEDs only)

HID LiteBox®

CASE MATERIAL: High-impact ABS thermoplastic housing. Rubberized impact bumper, lens ring and cushioned-grip handle. WEIGHT/DIMENSIONS: Weight: 10.1 lbs (4.6 kg)* Length: 14.9 in. (38 cm) Body Width: 5.1 in. (13 cm) Overall Height: 8.8 in. (23 cm) Head Diameter: 7.7 in. (20 cm) LIGHT SOURCE: 35W High Intensity Discharge Xenon lamp w/ 2000 hr minimum lifetime. 2 White 5mm 100,000 life, shock-proof LEDs

Quick Release Strap

Head Office: 1-866-652-2877

West: (604) 526-1631

LIGHT OUTPUT: Xenon H.I.D. Lamp 3350 Lumens typical; 1,000,000 Peak Beam Candlepower. LED: 9 Lumens typical (each).

Prairies: 1-866-652-2877

East: 1-877-993-9968

firebox®

DIMENSIONS: Length: 11 .5 in. (29.2 cm) Width: 5.1 in. (13 cm) Height: 7 in. (17.8 cm) WEIGHT: 7.4 lbs (3.36 kg)* LIGHT SOURCE: High-intensity halogen bi-pin bulb 8 watt spot with 100 hour life time and (2) two ultra bright blue LEDs . LIGHT OUTPUT: Up to 80,000 Peak Beam Candlepower utilizing 8 watt spot bi-pin bulb. Bulb Rating: 150 Lumens Typical BATTERY/RUN TIME: Zero-maintenance 6V, 12Ah sealed lead acid operates up to nine hours per charge and is rechargeable up to 500 times. Red and green LEDs give charge status feedback. Up to 8 hours (Halogen and LEDs) Up to 100 hours (LEDs only) Up to 9 hours (Halogen only) MODELS: Standard System - International safety orange; includes shoulder strap; comes with AC and DC chargers and charge rack Vehicle Mount System - International safety orange; comes with vehicle-mountable hard-wire rack and shoulder carrying strap. **The FireBox fits existing LiteBox® mounting racks** APPROVALS**: Most models meet applicable European Community Directives. Rack meets requirements of NFPA 1901-12-1.7 mounted in any position. WARRANTY: Limited lifetime warranty.

BATTERY/RUN TIME: 35 Watt High Intensity Discharge Xenon lamp in a deep-dish parabolic reflector produces a long range high intensity beam with optimum peripheral illumination for scene lighting. Dual white navigation LEDs for low level lighting applications. Fully articulating head can be aimed precisely at target. WARRANTY: Limited lifetime warranty; 6 month warranty on lamp.

flashlights Flashlights by STREAMLIGHT survivor® dIVISION 1

survivor® dIVISION 2

survivor® LED

SURVIVOR ACCESSORIES: Fast Charger Holder

10-hour Steady Charger Holder

Battery Industrial rechargeable nickel-cadmium 4.8 volt, 1.8 amp hour, 4 cell sub-C; can be recharged up to 1,000 times. lens Unbreakable Lexan® Lens with silicone anti-scratch coating is assembled in a heavy duty bezel. O-ring sealed. light source 2.1-watt xenon bulb with an average life of 30 hours. light output Up to 15,000 Peak beam candlepower. Bulb Rating: 31 Lumens typical case MATERIAL Lamp housing, battery housing and battery base are made from high impact super tough nylon, offering exceptional durability and weather resistance. All openings are O ring sealed. Spring loaded clip with built in attachment ring attaches to belts and harnesses. One way valve for case venting. Available in international safety orange or high visibility yellow. WEIGHT (WITH BATTERY) 15.4 oz (437 grams) dimensions Height: 6.75 in. (17.15 cm) Width: 2.85 in. (7.24 cm) Diameter: 2.87 in. (7.29 cm) Height in charger: 8 .50 in. (21.6 cm) Grip area: Height: 3.6 in. (9.14 cm) Width: 2.20 in. (5.59 cm) Thickness: 1.35 in. (3.43cm) RUN TIME Operational for up to 4.25 continuous hours between charges.

SURVIVOR ACCESSORIES: 5 Unit Bank Charger, 120V or 230V AC

Battery Industrial rechargeable nickel-cadmium 4.8 volt, 1.8 amp hour, 4 cell sub-C can be recharged up to 1,000 times. Spare battery pack can be speed-loaded in seconds into the light via a hinged door with stainless steel latch. lens Unbreakable Lexan® Lens with silicone anti-scratch coating is assembled in a heavy duty bezel. “O” ring sealed.

DIMENSIONS: Height:7.06 in. (17.92 cm) Height in charger: 8 .50 in. (21.6 cm) Width: 2.85 in. (7.24 cm) Diameter: 2.87 in. (7.29 cm) Grip area: Height: 3.6 in. (9.14 cm) Thickness: 1.35 in. (3.43cm) Width: 2.20 in. (5.59 cm) WEIGHT: Ni-Cd: 17.9 oz (508 grams)*, Alkaline: 13.1 oz (371 grams)*

light source 5.5-watt, black-dot xenon bulb with antiglare coating has an average life of up to 50 hours and provides maximum visibility in smoke and fog with less glare, scatter and bounce back.

LENS: Unbreakable Lexan® Lens with silicone anti-scratch coating is assembled in a heavy duty bezel. O-ring sealed.

light output Up to 25,000 Peak beam candlepower. Bulb Rating: 114 Lumens typical

LIGHT OUTPUT: Up to 65 Lumens typical

case MATERIAL Lamp housing, battery housing and battery base are made from high impact super tough nylon, offering exceptional durability and weather resistance. All openings are “O” ring sealed. Spring loaded clip with built in attachment ring attaches to belts and harnesses. One way valve for case venting. Available in international safety orange or high visibility yellow. WEIGHT (WITH BATTERY) 15.4 oz (437 grams) dimensions Height: 6.75 in. (17.15 cm) Width: 2.85 in. (7.24 cm) Diameter: 2.87 in. (7.29 cm) Height in charger: 8 .50 in. (21.6 cm) Grip area: Height: 3.6 in. (9.14 cm) Width: 2.20 in. (5.59 cm) Thickness: 1.35 in. (3.43cm) RUN TIME Operational for up to 1.70 continuous hours between charges.

Rechargeable Battery Packs

LIGHT SOURCE: 50,000 hr life super high flux LED

ON/OFF: Raised push-button switch for easy use with gloves. 3-position switch: high, low, locator strobe light RUN TIME: Operational between charges for up to 6 hrs on low beam, 3 hrs high beam; with rechargeable or alkaline batteries BATTERY: Industrial rechargeable NiCd 4.8V, 1.8 amp hr, 4 cell sub-C; can be recharged up to 1,000 times; or 4 “AA” alkaline CHARGING: AC and DC one-hour fast chargers with full charge indicators designed specifically for AC or DC power sources.

PiggyBack® Charger for charging light and spare battery pack simultaneously. (Available in Fast or Steady Charge for Division 2 models only)

Features: The universal Steady Charger, which requires up to 10 hours for a complete charge, can be used with 110V, 120V, 230V, 240V, or 12V DC by exchanging its charge cord.

12V DC Charge Cords

100V, 120V, 230V, 240V AC Charge Cords

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT tactical hand-held series NF-2®

NF-2® LED

Battery Two (2) 3 Volt CR123A Lithium battery with a storage life of 10 years. lens High temperature glass. light source 6 Volt, high pressure Xenon gas filled bi-pin bulb with a 30 hour lifetime. light output Xenon Bulb – up to 7,900 Peak beam candlepower, Bulb Rating: 114 Lumens typical case MATERIAL 6000 Series machined aircraft aluminum with anodized finish. Available in Black WEIGHT (WITH BATTERY) 15.4 oz (437 grams) dimensions Length: 4.80 in. (12.19 cm) Major Diameter: 1.25 in. (3.18 cm) Body Diameter: 0.88 in. (2.24 cm) RUN TIME Up to 1 hour

tl-2® & tl-2® led

Battery Two (2) 3 Volt CR123A Lithium battery with a storage life of 10 years. lens High temperature glass. light source 6 Volt, high pressure Xenon gas filled bi-pin bulb with a 30 hour lifetime. light output LED Rating - 42 Lumens typical case MATERIAL 6000 Series machined aircraft aluminum with anodized finish. Available in Black WEIGHT (WITH BATTERY) 5.2 oz (147 grams) dimensions Length: 5.40 in. (13.72 cm) Major Diameter: 1.25 in. (3.18 cm) Body Diameter: 0.88 in. (2.24 cm)

Battery Powered by two (2) three-volt lithium energy cells that have a shelf life of nearly ten years. lens Unbreakable, polycarbonate lens with scratch resistant coating. light source 6-Volt Xenon gas bulb with 30 hour life. 1-Watt Luxeon LED with 10,000 hour lifetime. light output Xenon - Up to 7,900 Peak beam candlepower. Bulb Rating: 114 Lumens typical LED Rating - 42 Lumens Typical

RUN TIME Up to 1.75 hours of fully regulated maximum intensity. 2 additional hours of declining usable light.

case MATERIAL Machined aluminum covered by a rubberarmored sleeve for a sure grip.

Super Tac™

WEIGHT (WITH BATTERY) 4.7 oz (133 grams) 5.3 oz (150 grams) dimensions Length: 4.90 in. (12.5 cm) LED Length: 5.72 in. (14.5 cm) Major Diameter: 1.25 in. (3.18 cm) Body Diameter: 0.94 in. (2.39 cm)

The fully adjustable ring – unique to the NF-2 – adjusts to any hand size, providing a sure grip for one-handed operation.

CASE MATERIAL: 6000 Series machined aircraft aluminum with anodized finish. Available in Black.

RUN TIME Up to one hour of continuous use. LED up to 1.75 hours of fully regulated maximum intensity. 2 additional hours of declining usable light.LEDL

DIMENSIONS: Length: 6.62 in. (16.81 cm) Diameter: Major Diameter: 2.20 in. (5.59 cm) Body Diameter: 0.90 in. (2.29 cm)

long range targeting beam withoptimum peripheral illumination to aid in navigation. Optimized electronics provide regulated intensity.

WEIGHT: 7.1 oz (200 grams)*

ON/OFF: Tail cap push button provides one-handed momentary or constant “on”. Tail cap rotates for “SAFE” position.

LENS: Unbreakable polycarbonate lens LIGHT OUTPUT: Next generation C4 LED technology, shock-proof w/ 50,000 hour lifetime LIGHT SOURCE: Up to 30,000 peak beam candlepower,150 lumens minimum at designed drive current. Deep-dish parabolic reflector produces a

Head Office: 1-866-652-2877

scorpion® & scorpion® led

West: (604) 526-1631

Prairies: 1-866-652-2877

RUN TIME: Up to 3.5 hours regulated intensity with 2 additional hours of declining usable light. BATTERY: Two (2) 3 Volt disposable lithium cells

East: 1-877-993-9968

Battery Two (2) 3 Volt CR123A Lithium battery, with a storage life of 10 years. lens High temperature glass. light source 6 Volt, high pressure Xenon filled bi-pin bulb a 30 hour lifetime. 1 Watt Luxeon® LED with a 10,000 hour lifetime light output Bulb Rating (Xenon): up to 7,900 Peak beam candlepower. Bulb Rating: 114 Lumens typical LED Rating: 42 Lumens typical case MATERIAL 6000 Series machined aircraft aluminum with anodized finish. Both models available in Black. WEIGHT (WITH BATTERY) 4.2 oz (119 grams) 4.7 oz (129 grams) dimensions Length: 4.90 in. (12.45 cm) LED Length: 5.25 in. (13.33 cm) Major Diameter: 1.25 in. (3.18cm) Body Diameter: 0.90 in. (2.29 cm) RUN TIME Up to 1 hour LED up to 1.75 hours of fully regulated maximum intensity. 2 additional hours of declining usable light.

FEATURES: • IPX7 Rated design. All openings o-ring sealed to resist moisture. • Serialized for positive identification. • LED Solid State circuitry provides regulated light output throughout battery life. • Removable pocket clip. • Fits Streamlight 69100 Rail Mount, Fits Streamlight 75910 Holster. • Operates with remote switches. APPROVALS: Most models meet applicable European Community Directives. WARRANTY: Limited lifetime warranty.

flashlights Flashlights by STREAMLIGHT tactical hand-held series

tactical gun mount series

tl-3®

tl-3® led

TLR-1™

TLR-2™

Battery Three (3) 3 Volt CR123A Lithium battery, storage life is 10 years

lens Unbreakable, polycarbonate lens with scratch resistant coating.

Battery Powered by two 3-volt CR123A lithium batteries with 10-year storage life

light source 9 Volt, high pressure Xenon filled bi-pin bulb with a 30 hour lifetime.

light source 5 Watt Luxeon® LED with a 10,000 hour lifetime.

light source Shockproof 3-watt Luxeon® LED with blinding beam (up to 80 lumens)

light output Xenon Bulb – up to 11,500 Peak beam candlepower, Bulb Rating: 211 Lumens Typical

light output LED Rating- 90 Lumens typical

light output Delivers up to 80 lumens

light output Delivers up to 80 lumens (LED); 650-660 nm laser

case MATERIAL 6000 Series machined aircraft aluminum with anodized finish, both models available in Black WEIGHT (WITH BATTERY) 5.3 oz (150 grams) dimensions Length: 6.25 in. (15.88 cm) Major Diameter: 1.61 in. (4.09 cm) Body Diameter: 0.90 in. (2.29 cm) RUN TIME Up to 1 hour

case MATERIAL Machined aluminum sealed construction with black anodized ? nish WEIGHT (WITH BATTERY) 4.18 oz

case MATERIAL Machined aluminum sealed construction with black anodized ? nish WEIGHT (WITH BATTERY) 4.72 oz.

RUN TIME Up to 2.5 hr.

RUN TIME Up to 2.5 hr. (laser-only mode runs 45+ hrs.)

TLR ACCESSORIES:

RUN TIME Up to 4 hours

Sidewinder™

Articulating Head Tactical Flashlight CASE MATERIAL: High impact supertough nylon case offers exceptional durability and weather resistance. All openings are O-ring sealed. Available in Coyote and Green

LIGHT OUTPUT: 1/2 watt LED Rating: Up to 20 lumens typical at high (100%) intensity. Light output electronically regulated for consistent intensity output over battery capacity

DIMS/WEIGHT: Length: 2.31 in (5.87 cm) Width: 1.05 in. (2.67 cm) Depth: 4.63 in. (11.76 cm) 3.28 oz (93 grams) 4.96 oz (141 grams)*

ON/OFF/INTENSITY/ MODE SELECTION: Compound On-Off mode selctor switch ergonomically separates On-Off-Dimming and mode selection functions. Design does not require operator to access separate switching locations on the device. Rubber dome actuator and 4 position pull-to-turn locking rotary selector knob with IR tactile indicator provides easy operation even when wearing heavy gloves.

LENS: Unbreakable polycarbonate lens with scratch-resistant coating. Gasket sealed. LIGHT SOURCE: 1/2 watt white high flux LED, 50,000 hr LED life 5mm IR LED, peak wavelength 880 nm, 100,000 hr LED life 5mm Red LED, peak wavelength 630 nm, 100,000 hr LED life 5mm Blue LED, peak wavelength 470 nm, 100,000 hr LED life 5mm Green LED, peak wavelength 520nm, 100,000 hr LED life

TLR-Series fits most handguns with rails as well as long guns with 1913 (Picatinny style) rails. Mounts or Adapters for: Mossberg Shotguns (12 gauge), 12 ga. Shotguns, with extended magazine tubes, Remington 870, AR-15/M-16, MP-5, HK USP (Full Size) Handgun, S&W TSW, 99

BATTERY: Two (2) AA alkaline cells provide fast replacement with readily available batteries. Lithium AA cells allow extended operation in extreme temperature environments (-*40F to 105F) APPROVALS/WARRANTY: Most models meet applicable European Community Directives. 1 Year limited warranty

Head Office: 1-866-652-2877

West: (604) 526-1631

Flip-Up Filters in Red, Opaque and Infrared

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT tactical gun mount series m-3x™

m-6x™

tactical laser illuminator

Battery Two 3 volt lithium (CR123A)

m-3™ / m3™ led

Battery Two (2) 3 volt lithium (CR123A)

lens High temperature; shock mounted, impact resistant, Boro Silicate Glass lens.

light output Xenon: Up to 9,000 Peak Beam Candlepower. Bulb Rating: 125 Lumens typical. case MATERIAL High impact engineered polymer, chemical resistant; available in black only. WEIGHT (WITH BATTERY) Pistol: 3.8 oz (107.8 grams) Long Gun: 4.2 oz (119.1 grams) and .5 oz Long Gun Remote (14.25 grams)

light source High pressure xenon lamp. 650 nm Laser

Battery (2) 3 volt lithium (CR123A)

light output Xenon: Up to 9,000 Peak Beam Candlepower. Bulb Rating: 125 Lumens typical.

lens High temperature; shock mounted, impact resistant, Boro Silicate Glass lens.

case MATERIAL High impact Engineering polymer, chemical resistant; available in black only.

light source High intensity xenon lamp, 25 hour bulb life. High performance LED 10,000 hour LED life; LED available in Red, Green, or Infrared.

WEIGHT (WITH BATTERY) Pistol: 4.7 oz (113.2 grams) Long Gun: 5.0 oz (141.7 grams) and .5 oz Long Gun Remote (14.2 grams)

dimensions Pistol: Length: 3.40 in. (8.34 cm) Width: 1.60 in. (4.06 cm) Height: 1.60 in. (4.06 cm) Long Gun: Length: 3.60 in. (9.14 cm) Width: 1.60 in. (4.06 cm) Height: 1.60 in. (4.06 cm)

dimensions Pistol: Length: 3.40 in. (8.34 cm) Width: 1.60 in. (4.06 cm) Height: 2.00in. (5.08 cm) Long Gun: Length: 3.60 in. (9.14 cm) Width: 1.60 in. (4.06 cm) Height: 2.00 in. (5.08 cm)

RUN TIME 1 hour continuous runtime.

RUN TIME 1 hour continuous runtime. Interchangeable Long Gun and Pistol Backplates

M-3X / m-6X ACCESSORIES:

light output Xenon Lamp: Up to 5,000 Peak Beam Candlepower. Bulb Rating: 90 Lumens typical. case MATERIAL High impact Engineering polymer, chemical resistant; available in black only. WEIGHT (WITH BATTERY) 3.3 oz (93.6 grams) 3.7 oz (104.9 grams) - LED dimensions Length: 3.40 in. (8.34 cm) Width: 1.60 in. (4.06 cm) Height: 1.42 in. (3.61 cm) Height: 1.90 in. (4.83 cm) - LED RUN TIME Xenon Lamp: 1 hour minimum continuous run time. LED: 24 hours minimum continuous run time.

Contour Pistol Backplates Flip-up Bikini Filters in Red, Opaque and Infrared

tactical laser illuminator

Battery Two (2) 3 volt lithium (CR123A)

lens High temperature; shock mounted, impact resistant, Boro Silicate Glass lens.

light source High pressure xenon lamp.

m-6™

lens High temperature; shock mounted, impact resistant, Boro Silicate Glass lens. light source High intensity xenon lamp, 25 hour bulb life. 620-680 nm Laser. light output Xenon: Up to 5,000 Peak Beam Candlepower. Bulb Rating: 90 Lumens typical. case MATERIAL High impact engineering polymer, chemical resistant; available in black only. WEIGHT (WITH BATTERY) 3.6 oz (102.1 grams) dimensions Length: 3.40 in. (8.34 cm) Width: 1.60 in. (4.06 cm) Height: 1.90in. (4.83 cm) RUN TIME 1 hour continuous runtime. (Laser/Flashlight Simultaneously) 48+ Hours (Laseronly mode)

M-3 / m-6 ACCESSORIES:

S&W Latch Bar for use with S&W 99 and TSW Models

HK USP (Full Size) Hand Gun Adapter

Cable Switch used with Long Gun Backplate Remote Switch (handguns) Remote Switch (pump shotguns)

M-Series fits: (without adapters or mounts) handguns with Glock-style or 1913 (Picatinny) rails, long guns with 1913 rails.

Lithium Batteries

Mounts or Adapters for: Mossberg Shotguns (12 gauge), 12 gauge Shotguns, with extended magazine tubes, Remington 870, AR-15/M-16, MP-5, HK USP (full size) Handgun, S&W TSW, 99 Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT twin-task® 3aa

Battery Three “AA” size alkaline batteries lens Unbreakable polycarbonate lens. light source 3.6 Volt, 0.6A high pressure Xenon Bulb 100,000 hour life “Nichia” LEDs light output Bulb Rating: 29 Lumens Typical (Xenon) LED Rating: 13 Lumens Typical (3 LEDs) case MATERIAL Corrosion and water resistant, anodized machined aluminum alloy. Available in Matte Black or Titanium. WEIGHT (WITH BATTERY) 6.72 oz (191 grams) dimensions Length: 8.54 in (21.7 cm) Major Diameter: 1.33 in (3.38 cm) Body Diameter: 0.79 in (2.00 cm) RUN TIME Up to 160 minutes (Xenon Bulb) Up to 80 hours (3 LEDs)

twin-task® 2d

Battery Two “D” size alkaline batteries lens Unbreakable polycarbonate lens. light source 2.4 Volt, 0.9A high pressure Xenon Bulb 100,000 hour life “Nichia” LEDs light output Bulb Rating: 22 Lumens Typical (Xenon) LED Rating: 43 Lumens Typical (10 LEDs) case MATERIAL Corrosion and water resistant, anodized machined aluminum alloy. Available in Black or Titanium. WEIGHT (WITH BATTERY) 1.39 lbs. (632 grams) dimensions Length: 8.35 in (21.2 cm) Major Diameter: 2.19 in. (5.56 cm) Body Diameter: 1.60 in. (4.07 cm) RUN TIME Up to 9.5 hours (Xenon Bulb) Up to 80 hours (5 LEDs) Up to 50 hours (10 LEDs)

twin-task® 3aaa

twin-task® 3c

twin-task® 3c-uv

Battery Three “C” size alkaline batteries

lens Unbreakable polycarbonate lens.

lens Unbreakable polycarbonate lens

light source 3.6 Volt, 0.9A high pressure Xenon (6) 100,000 hour life “Nichia” LEDs, (white) (6) 390 Nm ultra violet LEDs (UV Model)

light source 3.6 Volt, 0.9A high pressure Xenon (6) 390 Nm ultra violet LEDs (Black UV Model) (3) 390 Nm and (3) 375 Nm ultra violet LEDs (Titanium UV Model)

light output Bulb Rating: Up to 57 Lumens Typical (Xenon) LED Rating: Up to 26 Lumens Typical (6 white LEDs) case MATERIAL Corrosion and water resistant, anodized machined aluminum alloy. Available in Matte Black or Titanium. WEIGHT (WITH BATTERY) 1.00 lb. (449 grams) dimensions Length: 9.02 in (22.9 cm) Major Diameter: 1.68 in. (4.26 cm) Body Diameter: 1.26 in. (3.20 cm) RUN TIME Up to 5 hours (Xenon Bulb) Up to 160 hours (3 LEDs) Up to 100 hours (6 LEDs) 3-MODES:

CASE MATERIAL: Corrosion and water resistant, anodized machined aluminum alloy. Available in matte black DIMENSIONS: 5.38 in (13.69 cm) Diameter: Major Diameter: 1.57 in. (3.98 cm) Body Diameter: 1.17 in. (2.98 cm) WEIGHT: 7.04 ozs. (200 grams)* LENS: Unbreakable polycarbonate lens LIGHT SOURCE: 3.6 Volt, 0.9A high pressure Xenon (5) 100,000 hour life “Nichia” LEDs, (white) Pre-focused visible red Laser cartridge

LIGHT OUTPUT: Bulb Rating: Up to 57 Lumens Typical (Xenon) LED Rating: Up to 21 Lumens Typical (5 white LEDs): <55 mW total LED output power Laser Rating: 650 nM wavelength, Class IIIa (3R), <5 mW laser output power ON/OFF: Push button sequences through Laser only, (5) LEDs, Laser/Xenon or Off

Head Office: 1-866-652-2877

case MATERIAL Corrosion and water resistant, anodized machined aluminum alloy. Available in Matte Black or Titanium. WEIGHT (WITH BATTERY) 1.00 lb. (449 grams) dimensions Length: 9.02 in (22.9 cm) Major Diameter: 1.68 in. (4.26 cm) Body Diameter: 1.26 in. (3.20 cm) RUN TIME • Up to 5 hours (Xenon Bulb) • Up to 160 hours (3 LEDs) • Up to 100 hours (6 LEDs) 3-MODES:

3 LEDs – Run Time 160 Hour

6 LEDs – Run Time 100 Hours

RUN TIME: • Up to 2.5 hours (Xenon Bulb) • Up to 12 hours (5 LEDs) BATTERY: Three “AAA” size alkaline batteries

light output Bulb Rating: Up to 57 Lumens Typical (Xenon) LED Rating: 390 Nm ultra violet LEDs (Black UV Model) 390Nm and 375 Nm ultra vilolet LEDs (Titanium UV Model)

XENON – Run Time 5 Hours XENON – Run Time 5 Hours

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT twin-task® 1-cell lithium

twin-task® 2-cell lithium

task-light™ 2L3w

twin-task® 1-cell lithium

Battery Two (2) 3 Volt disposable lithium cells – included in packaging

Battery One 3 Volt CR123A Lithium batteries lens Unbreakable polycarbonate lens. light source 2.4 Volt, 1A high pressure Xenon Bulb 100,000 hour life “Nichia” LEDs light output Bulb Rating: 29 Lumens Typical LED Rating: 10 Lumens Typical (3 LEDs) case MATERIAL Corrosion and water resistant, anodized machined aluminum alloy. Available in Matte Black or Titanium. WEIGHT (WITH BATTERY) 4.00 oz (112 grams) dimensions Length: 4.09 in (10.39 cm) Major Diameter: 1.33 in. (3.38 cm) Body Diameter: 0.98 in. (2.49 cm) RUN TIME Up to 1.5 hours (Xenon Bulb) Up to 9.5 hours (3 LEDs)

lens Unbreakable polycarbonate lens. Battery Three “AA” size alkaline batteries lens Unbreakable polycarbonate lens. light source 4.8 Volt, 0.9A high pressure Xenon Bulb 100,000 hour life “Nichia” LEDs light output Bulb Rating: 72 Lumens Typical (Xenon) LED Rating: 10 Lumens typical (3 LEDs) case MATERIAL Corrosion and water resistant, anodized machined aluminum alloy. Available in Matte Black or Titanium. WEIGHT (WITH BATTERY) 5.44 oz (152 grams) dimensions Length: 5.43 in (13.79 cm) Major Diameter: 1.33 in. (3.38 cm) Body Diameter: 0.98 in. (2.49 cm) RUN TIME Up to 2.5 hours (Xenon Bulb) Up to 28 hours (LEDs)

2-MODES:

3 LEDs – Run Time 9.5 Hours

3 LEDs – Run Time 28 Hours

XENON – Run Time 1.5 Hours

XENON – Run Time 2.5 Hours

Lithium battery has a shelf life of nearly ten years.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

light source Luxeon® Star, 3 Watt, 20,000 hour rated life, Super High Flux LED light output High – Up to 77 Lumens typical, Low – Up to 19 Lumens typical case MATERIAL 6000 series aircraft aluminum machined housing, O-ring sealed for water resistance, knurled barrel for improved grip, impact resistant construction(DropTest) verified, Type II black matte anodized finish. WEIGHT (WITH BATTERY) 6.00 oz (170 grams) dimensions Length: 6.12 inches (15.54 cm) Major Diameter: 1.33 in. (3.38 cm) Body Diameter: 0.98 in. (2.49 cm) RUN TIME High (100%) 1.5+ hours at Regulated Maximum Intensity 1.5+ additional hours of Declining Usable Output Low (25%) 9+ hours

Battery Three (3) “AA” alkaline batteries lens: Unbreakable polycarbonate lens. light source Luxeon® Star, 1 Watt, 50,000 hour rated life, Super High Flux LED light output: 28 Lumens Typical case MATERIAL Corrosion and water resistant, anodized machined aluminum alloy. Available in Matte Black or Titanium. WEIGHT (WITH BATTERY) 6.40 oz (180 grams) dimensions Length: 8.60 inches (21.7 cm) Major Diameter: 1.33 in. (3.38 cm) Body Diameter: 0.79 in. (2.01 cm) RUN TIME: Up to 28 hours

Task-Light® 1AA LED

MODE:

Super High-Flux LED (In “Off” Mode)

East: 1-877-993-9968

CASE MATERIAL: Corrosion and water resistant, anodized machined aluminum. Available in Gun Metal Gray DIMENSIONS: Length: 4.25 inches (10.8 cm) WEIGHT: 3.1 oz (88 grams)* LENS: Impact-resistant polycarbonate lens LIGHT SOURCE: 5mm 100,000 hour high-flux LED LIGHT OUTPUT: 8 Lumens Typical ON/OFF: Two-stage push button head switch; High and Low Power. Depress button to activate strobe RUN TIME: Up to 5 hours at optimum output; Up to 80 hours on low power BATTERY: One (1) 'AA' alkaline battery APPROVALS: Most models meet applicable European Community Directives. WARRANTY: Limited lifetime warranty

flashlights Flashlights by STREAMLIGHT argo™ hp luxeon® LED

Battery (2) 3 Volt disposable lithium cells – included in package lens Unbreakable polycarbonate lens. light source One (1 Watt) Super High-Flux Luxeon LED, 50,000 hour life light output Bulb rating: 24 Lumens typical (high mode), 6 Lumens typical (low mode)

argo™ luxeon®

Battery Three (3) “AAA” alkaline batteries; LED battery indicator on back

DIMENSIONS: Facecap diameter: 1.88 in. (4.76 cm) Maximum Headlight Width: 2.50 in. (6.35 cm) Maximum Headlight Length: 3.08 in. (7.82 cm)

lens Unbreakable polycarbonate lens. light source One (1) Watt Super High Flux, 50,000 hour “Luxeon®” LED light output Three (3) digitally controlled brightness levels: 24 lumens,12 lumens, 6 lumens

WEIGHT: 4.5 ounces (128 grams) 7.1 ounces (202 grams) * Battery Three (3) AAA alkaline batteries. (Included with purchase) lens Unbreakable polycarbonate lens.

case MATERIAL Yellow ABS Case

case MATERIAL Impact resistant ABS case; available in black

WEIGHT 4.75 oz with batteries and strap (134.66 grams)

WEIGHT 4.00 oz. (114.12 grams) – weight with batteries and head strap

dimensions Height: 2.15 in. (5.46 cm) Width: 2.9 in. (7.37 cm) Depth: 2.25 in. (5.72 cm)

dimensions Facecap diameter: 1.60 in. (4.06 cm) Maximum headlight width: 3.00 in. (7.52 cm) Maximum headlight depth: 2.00 in. (5.08 cm) – including head strap and mounting plate

3AA HAZ-LO® Div 1

trident® LED

RUN TIME 24 lumens for one (1) hour; 12 lumens for 2.5 hours; 6 lumens for 6.5 hours

RUN TIME High (100%): 4.75 hrs. @ Regulated Maximum Intensity 3.5+ hrs. of Declining Useable Output Low (25%): 20+ Hrs.

LENS: Unbreakable polycarbonate lens. O-ring sealed. LIGHT SOURCE: One (1) Watt Super High Flux Luxeon® LED, 50,000 hour lifetime. LIGHT OUTPUT: LED Rating: 34 Lumens typical

light source 3 Volt, 300 mA Xenon Bi-Pin Bulb light output 100,000 hour life LEDs. Bulb Rating: 18 Lumens Typical (Xenon) LED Rating: 7.5 Lumens Typical (3 LEDs)

ON/OFF: Push button switch; On, Off Rubber dome actuator provides easy operation even when wearing heavy gloves. RUN TIME: Up to 11 hours of declining output to 25% intensity.

case MATERIAL Water resistant lightweight thermoplastic construction. Yellow or Green.

BATTERY: Three (3) “AA” size alkaline cells provide fast replacement with readily available batteries.

WEIGHT (WITH BATTERY) 4.64 oz (131.54 grams) Includes Head Strap Mounting Plate.

FEATURES: Impact resistant housing – drop test verified 1 Watt Super High Flux Luxeon Star LED Package includes both elastic head strap and rubber hard hat strap

dimensions Face Cap Diameter: 1.86 in. (4.72 cm) Maximum Width: 2.55 in. (6.48 cm) Maximum Depth: (Includes head strap mounting plate) 2.53 in. (6.42 cm)

APPROVALS**: UL Classified Class I, Division 1, Groups A,B,C,D, Temperature Code: T4.

RUN TIME Up to 150 hours. (Single LED)

Most models meet applicable European Community Directives. WARRANTY: Limited lifetime warranty.

Two Trident Models: Yellow Model – Contains 3 ultra-bright white LEDs Green Model – Contains 1 safety green LED and 2 ultra-bright white LEDs Short distance

Medium distance

Long Distance

trident 3-way lighting

High-powered xenon bulb (both models)

Night Vision Green LED (green Trident only) / brilliant white LED (yellow Trident)

Two, white LEDs (green Trident) / Three, white LEDs (yellow Trident)

Run Time: 120 hours

Run Time: 60/40 hours

Run Time: 2.25 hours

Prairies: 1-866-652-2877

East: 1-877-993-9968

Head Office: 1-866-652-2877

West: (604) 526-1631

flashlights Flashlights by STREAMLIGHT septor® LED

enduro™

jr.® luxeon® led

jr.® luxeon® reach led

Battery Two (2) “AA” alkaline batteries; included in packaging

Battery Three (3) “AAA” alkaline batteries. (Included with purchase)

lens Unbreakable polycarbonate lens.

Battery (2) 1.5V “AAA” cells – included in package

light source 100,000 hour life LEDs.

lens Unbreakable polycarbonate lens.

light output LED Rating: 17.5 Lumens Typical (7 LEDs), 7.5 LumensTypical (3 LEDs), 2.5 Lumens Typical (1 LED)

light source One (1) High-Flux LED, 100,000 hour life

case MATERIAL Water resistant lightweight thermoplastic construction. Yellow. WEIGHT (WITH BATTERY) 4.72 oz (133.81 grams) dimensions Face Cap Diameter: 1.86 in. (4.72 cm) Maximum Width: 2.55 in. (6.48 cm) Maximum Depth: (Includes head strap mounting plate) 2.53 in. (6.42 cm) RUN TIME Up to 150 hours. (Single LED)

3-way lighting

light output LED rating: Up to 14.5 Lumens typical and up to 850 Peak Beam Candlepower (high mode), 6 Lumens typical (low mode) case MATERIAL Impact resistant ABS case; available in black or REALTREE Hardwoods® Green High Definition® (HD) camouflage pattern. WEIGHT 2.75 oz. (78.5 grams) – weight with batteries and head strap

light source One (1) Watt “Luxeon Star” 50,000 hour LED light output LED Rating: 27 Lumens Typical. case MATERIAL Machined aircraft aluminum with anodized finish; shock and water resistant WEIGHT (WITH BATTERY) 3.80 ounces (107 grams) dimensions Length: 6.5 in. (16.51 cm) Major Diameter: 1.00 in. (2.54 cm) Body Diameter: 0.73 in. (1.85 cm) RUN TIME 4.0 hours at Maximum Intensity. 2.0 hours additional Declining Useable Output.

Jr. luxeon accessories

dimensions Facecap diameter: 1.30 in. (3.25 cm) Maximum headlight width: 2.25 in. (5.70 cm) Maximum headlight depth: 1.60 in. (4.0 cm) – including head strap and mounting plate

lens Unbreakable polycarbonate lens. light source One (1) Watt “Luxeon Star” 50,000 hour LED light output LED Rating: 24 Lumens Typical. case MATERIAL Machined aircraft aluminum with anodized finish; shock and water resistant WEIGHT (WITH BATTERY) 6.30 ounces (180 grams) dimensions Length (O/A): 20.0 in. (50.80 cm) Major Diameter: 1.00 in. (2.54 cm) Body Diameter: 0.73 in. (1.85 cm) Reach Length: 14.0 in. (35.6 cm) Folded Length: 9.0 in. (22.8 cm) RUN TIME 3 hours at Maximum Intensity. 1 ½ hours additional Declining Useable Output.

RUN TIME High (100%): 6 hrs. @ Regulated Intensity Low (25%): 24 Hrs.

Run Time: 120 hours

Battery Two (2) “AA” alkaline batteries; included in packaging

Helmet clamp, Fire #70108 Helmet clamp, Industrial #70110 Helmet clamp, Euro #70109

Single LED for short range illumination

Run Time: 72 hours Three LEDs for medium range illumination

Black nylon flapless holster. #70129 Run Time: 22 hours The power of seven LEDs for distance lighting

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT stylus®

stylus accessories:

The revolutionary Stylus® combines the convenience of a penlight with the power of a high-intensity LED. These tough, durable, safety rated, waterproof lights are ideal for a variety of tasks, from reading a map on a camping trip and inspecting hard-to-see places, to forensic investigations and tactical law enforcement operations. Available in a variety of LED colours for various applications. This bright LED penlight has a battery life 20x greater than a standard flashlight and goes anywhere you need it. • Case available in black, gold, silver, red, blue, and camouflage (combo only) • High-intensity LED lasts 100,000 hrs. • LED available in white (4.3 lumens), red (1.13 lumens), blue (.71 lumens), green (2.6 lumens), and ultraviolet (375 nm) • Powered by 3 "AAAA" alkaline batteries • Runs up to 60 continuous hrs. • Momentary blink and constant "on" modes • Serialized for easy identification • Pocket clip for easy access • 6.21" • 1.1 oz.

stylus reach® A sleek little penlight that bends to the task throwing a six inch circle of light from a foot away. The Stylus Reach® includes a 7" flexible cable that enables you to see into even the tightest spots. It comes in a variety of LED colours for various applications. • Includes flexible 7" extension cable that allows for 14" of "reach" • Case available in black or silver • High-intensity LED lasts 100,000 hrs. • Powered by 3 "AAAA" alkaline batteries • Runs up to 60 continuous hrs. • LED available in arctic white (4.3 lumens) or ice blue (.71 lumens) • 14" extended, 6.75" folded • 1.7 oz.

Sharp Spot™ fits over the tip of the Stylus for a sharper focused, extended beam. Glare Guard

Realtree Hardwoods® Green Stylus Combo includes Sharp Spot, Glare Guard and Holster. Available in camo/green LED, black/green LED, and black/white LED.

stylus UV Includes an ultraviolet light for fluorescent detection of fraudulent documents and for use in forensic investigations. • The same features as Stylus with a (375 nm) ultraviolet LED

Stylus and Stylus Reach are available in a combo pack

UL Classified for Class 1, Division 1 UL Classified for Canadian Safety Standards for Class 1, Division 1 Meets applicable European Community Directives II 1G EEx ia IIB T1 DEMKO 04 ATEX 0410949

stylus reach® 18

Meets applicable European Community Directives

The slim, compact, lightweight Stylus Reach® allows you to see almost anywhere. Thanks to its flexible cable, nothing is out of sight.

Stylus Pro™

Alkaline Battery-Powered LED Pen Light

LIGHT SOURCE: 0.5 Watt High-Flux LED; 30,000 hours rated LED life

CASE MATERIAL: Corrosion & water resistant, machined aircraft-grade aluminum alloy, Type II MIL-Spec anodize plating.

LIGHT OUTPUT: Up to 24 Lumens Typical

DIMENSIONS: Length: 5.3 inches (134 mm) Body Diameter: 0.6 inches (15 mm) WEIGHT: 1.64 oz. (46.9 grams) with battery (AAA Panasonic battery included with purchase)

ON/OFF: Push Button Tail switch RUN TIME: Up to 7.5 hours of regulated runtime BATTERY: Two (2) “AAA” alkaline battery

FEATURES: • O-Ring Sealed, shock proof and drop tested construction • Waterproof per Code IP57; in accordance with specification EN 60529:1992 • High Strength “Break Away” safety lanyard. • Unbreakable pocket clip

• Includes flexible 18.75" extension cable that allows for 25.5" of "reach" • Case available in black • High-intensity LED lasts 100,000 hrs. • Powered by 3 "AAAA" alkaline batteries • Runs up to 60 continuous hrs. • LED available in arctic white (4.3 lumens) or ice blue (.71 lumens) • 25.5" extended, 13" folded • 3.5 oz.

APPROVALS: Most models meet applicable European Community Directives. WARRANTY: Limited lifetime warranty.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

flashlights Flashlights by STREAMLIGHT clipmate®

cuffmate®

Battery Three “AAA” alkaline batteries. lens Unbreakable polycarbonate lens with rubber coating. light source 100,000 hour life LEDs.

keymate®

Battery Two (2) replaceable CR2016 lithium batteries.

CASE MATERIAL: Machined aircraft-grade aluminum with anodized finish. Available in black. LED available in white.

lens Unbreakable polycarbonate lens.

DIMENSIONS: Length: 1.47 in. (3.73 cm) Diameter: Head Diameter: 0.51 in. (1.30 cm) Body Diameter: 0.43 in. (1.09 cm)

light source Dual 100,000 hour lifetime high intensity Light Emitting Diodes (LED), “solid-state” bulbs. light output 7 Lumens typical.

light output 7.5 Lumens typical (white LEDs) case MATERIAL Water resistant lightweight thermoplastic construction. Yellow or Black.

WEIGHT (WITH BATTERY) 0.4 ounces (11.3g)

dimensions Length: 3.52 in. (8.94 cm) Width: 0.85 in. (2.16 cm)

light source 100,000 hour life Hi intensity LED light output 4.3 Lumens Typical (White LED) case MATERIAL Machined aircraft-grade aluminum with anodized finish. Available in black or titanium. LED available in White, Green, or Blue.

dimensions Length: 3.25 in. (8.26 cm) Width: 0.94 in. (2.39 cm) RUN TIME CuffMate has a run time of 7.50 continuous hours, or 1,000s of momentary bursts of light.

RUN TIME Up to 40 hours.

WEIGHT: 0.36 oz (10 grams)* Battery Four (4) LR 44 Alkaline coin cells. lens: Unbreakable polycarbonate lens.

case MATERIAL Indestructible super tough nylon body, alloy steel key and double lock pin.

WEIGHT (WITH BATTERY) 2.4 oz. (66.7 grams)

Nano Light® LED

LIGHT SOURCE: 5mm white LED, impervious to shock with a 100,000 hour lifetime. LIGHT OUTPUT: 10 Lumens Typical (White LED), Parabolic shaped LED area optimizes beam performance ON/OFF: Rotating On/Off Head Switch RUN TIME: Up to 8 hours declining useable output BATTERY: Four (4) IEC-LR41 coin cells. FEATURES: Non-rotating snap hook

WEIGHT (WITH BATTERY) 0.9 ounces (25.4 grams)

APPROVALS: Most models meet applicable European Community Directives.

dimensions Length: 2.36 in. (5.9 cm) Major Diameter: 0.74 in. (1.88 cm) Body Diameter: 0.57 in. (1.45 cm)

WARRANTY: Limited lifetime warranty

RUN TIME: Up to 96 hour run time.

Exclusive dual LED for double locking and unlocking of handcuffs. Compatible with most handcuffs. Swiveling keyring connector.

KeyMate Coloured Lens options

Flashlights by LED LOGIC STRIKER-VG DIGITAL • • • • • •

Push button for ease of operation and quick location in the dark Four function light modes: 1. Momentary on 2. Steady on 3. Dimming to desired light level 4. High output strobe - designed to disorient aggressive individuals for a momentary advantage to apprehend, immobilize or escape Shock resistant Waterproof in 25 feet of water for 30 minutes Complete shutdown with no residual battery drain when unit is not in use Lifetime Warranty

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

simply one of the most powerful 3 watt LED flashlights in the world

East: 1-877-993-9968

FLASHLIGHTS Flashlights by NIGHTHUNTER RECHARGEABLE FLASHLIGHTS

Night Hunter

NIGHTHUNTER SYSTEM XN01 • • • • • • •

Waterproof Case

Night Hunter Ultra-High Intensity Illumination System with Internal Rechargeable Battery (12 VDC) & Internal Smart Battery Charger Ruggedized, Waterproof Pelican Carrying/Storage Case 6’ Power Cord with “Male” Lighter Adapter Tripod Mount (with 1/4 - 20 insert) Camera Mount (with 1/4-20 screw and locking knob 110/240 VAC to 12 VDC Converter

Filters

Shoulder Strap

Camera Screw Locking Knob

6’ Power Cord w/Male Adapter 110/240 VAC to 12 VDC Converter, 50-60Hz

ACCESSORIES AXE-XN01-101 AXW-XN01-102 AXE-XN01-103 AXE-XN01-201

850NM Near-IR Filter Covert Near-IR Filter Amber Filter 10’ Power Cord w/Male Lighter Adapter

AXE-XN01-301 AXE-XN01-501 AXE-XN01-502 AXE-XN01-503 AXE-XN01-504 AXE-XN01-505

Tactical Carrying Case Lamp Module Rechargeable Battery 6’ Power Cord w/Male Adapter 1/4 - 20 Screw with Locking Knob 110/240 VAC to 12 VDC Converter, 50-60Hz

SPECIFICATIONS NIGHTHUNTER Size: 13” x 5” Weight: 9.7 lbs. Battery Type: Thinline, Sealed Lead Recharging time: 4 hrs. Recharging cycles (est.): 500

OPERATIONAL DURATION (EXTERNAL POWER) Peak power: no limit Low power: no limit Lamp Life: >500 hrs. Power Cable/Connector: 6 ft. w/male vehicle lighter adapter Beam Spread: 1 to 10°

OPERATIONAL DURATION Peak Power: 100% duty: 35 min. continuous use; 45 min. intermittent use Low power: 100% duty: 1 hr. continuous use; >1 hr. intermittent use

TEMPERATURE Operation: Storage:

-4 to 122°F -4 to 104°F

Rechargeable Lights by ABLE 2 SHO-ME® Rechargeable Lights come with a 6-volt, 4.0 amp-hour sealed lead-acid battery. Housings available in Black, Red or Yellow. Choice of charger: a) AC charger mounts on wall and plugs into a 110-volt outlet; b) DC charger mounts on fire wall and plugs into DC outlet; c) Direct-Wire charger mounts in trunk or storage compartment and connects with vehicle wiring. When ordering, please indicate housing colour, bulb style and choice of charger. AAB09.2770 RECHARGEABLE LIGHT

AAB09.2771

Features a 25,000 CP Halogen (#H7550) GE spot sealed-beam bulb. It operates from 3 to 4 hours on a steady beam or 6 to 8 hours intermittently.

Features a 550 CP Halogen (#H7551) GE flood sealed-beam bulb. Operates from 3 to 4 hours on a steady beam or 6 to 8 hours intermittently. AAB93.H7550 Replacement Spot Bulb AAB93.H7551 Replacement Flood Bulb

Tactical Lights by LASER DEVICES OPERATIVE® OV-1 HANDHELD TACTICAL LIGHT • • • • • • • • • • • • •

Waterproof to 20 meters Aircraft 6061T-6 aluminum housing Deeply knurled body provides a positive non- slip grip Easy one-hand activation using a convenient push button switch located in the tailpiece of the light Light can be operated in a Momentary fashion by partially depressing the switch, or can be locked ON by completely depressing the push button switch Activation switch is protected by the housing to prevent accidental activation of the light Supplied with pocket clip and wrist lanyard Powerful 6 volt light High pressure xenon bulb emits a blinding bright white light Light beam can be focused from spot to flood Light provides approximately one hour of bright illumination on each set of batteries All lights supplied with lithium batteries with a ten year shelf life Made in the USA

Custom logo service available for orders of 100 units or more.

Class III, Type 2 anodized finish in the following colors: Black, Red, Blue, Gold and Pewter

FLASHLIGHT SPECIFICATIONS Electrical Specifications Light Output: 95 lumens for 6 volt Bulb Type: High pressure xenon Battery Life: one hour (depending upon temperature) Battery Type: Lithium 2 x 3 Mechanical Specifications Limited Warranty: One year Length: 5.3 in.; 13.4 cm for 6 volt Diameter of Head: 1.0 in.; 2.5 cm Weight w/o Batteries: 4.6 oz.; 130.4 grams for 6 volt Environment: Waterproof to 20 meters

Head Office: 1-866-652-2877

OPERATIVE® OV-1 TACTICAL LIGHTS - Supplied with batteries.

6 Volt OV-1 with Push Button (On/Off/Momentary) Switch - Black 6 Volt OV-1 with Push Button (On/Off/Momentary) Switch - Red 6 Volt OV-1 with Push Button (On/Off/Momentary) Switch - Blue 6 Volt OV-1 with Push Button (On/Off/Momentary) Switch - Gold 6 Volt OV-1 with Push Button (On/Off/Momentary) Switch - Pewter Presentation Gift Box

West: (604) 526-1631

Prairies: 1-866-652-2877

Part No. Matte Finish Bright Finish 31000 31000B 31001 31001B 31002 31002B 31003 31003B 31004 31004B 31005BX

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASER™ TECHNOLOGY

DEVICE FIRES TWO PROBES, TRANSMITTING ENERGY THROUGH THE WIRES INTO THE NERVOUS SYSTEM TASER™ devices fire two probes up to a distance of 35 feet (10.7 meters), transmitting energy through the wires into the central nervous system of the target causing immediate involuntary incapacitation. Previous-generation electronic control devices use a simple high-energy, "blunt" pulse to penetrate through the skin and clothing barriers that serve as protective armor around the body. Well over 90% of the energy is lost in the process of barrier penetration. For this reason, high power levels (26 watts) are required to generate a neuromuscular incapacitation (NMI) effect as opposed to a simple pain response, requiring large batteries that add weight and size to the M26 weapon (18 ounces total). The 4th generation and patented Shaped Pulse™ technology in the TASER X26 uses a highly refined two-phase energy pulse that concentrates a small portion of energy to first penetrate the barrier, while the majority of electrical charge is held in reserve, flowing freely through the barrier once the circuit is established. The first phase, called the "Arc Phase," is optimized to generate a very high voltage to penetrate clothing, skin or other barriers. The Arc Phase is a high-voltage, short-

duration pulse that can arc through up to two inches of clothing or barriers. Once the arc is created, the air in the arc is ionized and becomes a low impedance electrical conductor that conducts the second pulse phase into the body. The second phase of the Shaped Pulse is the simulation phase, or "Stim Phase." The Stim Phase does not have to arc across a barrier, since this was accomplished by the Arc Phase. The Stim phase only has to flow across the highly conductive arc from the Arc Phase. Hence, the Stim Phase is optimized to provide maximum incapacitation for a human target while operating at super-efficient power levels. The timing of these phases is so fast that to most electronic instrumentation, and all human observers, the Shaped Pulse appears as just one output pulse (arc). The result of Shaped Pulse NMI technology is a high-performance, highly efficient electronic control device that is 60% smaller, 60% lighter, and consumes 1/5th the power of its predecessor.

Size comparison of TASER X26 and ADVANCED TASER M26

BLUNT PULSE TECHNOLOGY

SHAPED PULSE™ TECHNOLOGY

High energy pulse "brute force" barrier penetration. Over 90% of the energy is lost during barrier penetration.

Sharp, high voltage leading edge penetrates barrier. Almost 100% of the energy penetrates the barrier to incapacitate the target.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASERâ&#x201E;˘ X26E

WITH INTEGRATED LASER SIGHT, LOW-DENSITY LIGHTS, DIGITAL POWER MAGAZINE (DPM), DATAPORT DOWNLOAD CAPABILITY TASER X26E WITH DPM & TASER EXOSKELETON HOLSTER

C Models #26000 and #26011 shown with 25" (7.6m) XP TASER Cartridge Sold Separately

TASER X26E WITH DPM & BLADE-TECH TEK-LOK HOLSTER

The TASER X26 is a software upgradeable electronic control device manufactured by TASER International, Inc. Electronic Control Devices (ECD) use propelled wires or direct contact to conduct energy to affect the sensory and motor functions of the nervous system. The TASER X26 uses a replaceable cartridge containing compressed nitrogen to deploy two small probes that are attached to the TASER X26 by insulated conductive wires. The TASER X26 transmits powerful electrical pulses along the wires and into the body affecting the sensory and motor functions of the peripheral nervous system. The cartridges are available with various wire lengths from 15' to 35' (4.2 meters to 10.6 meters). The energy can penetrate up to two inches of clothing. ITEM

DESCRIPTION

26000

Black / Silver Grip Plates / TASER eXoskeleton Holster

26001

Black / Black Grip Plates / TASER eXoskeleton Holster

26003

Clear / Black Grip Plates / TASER eXoskeleton Holster

26004

Clear / Silver Grip Plates / TASER eXoskeleton Holster

26005

Yellow / Black Grip Plates / TASER eXoskeleton Holster

26006

Yellow / Silver Grip Plates / TASER eXoskeleton Holster

26011

Black / Silver Grip Plates / Blade-Tech Tek-Lok Holster

26014

Black / Black Grip Plates / Blade-Tech Tek-Lok Holster

26017

Clear / Black Grip Plates / Blade-Tech Tek-Lok Holster

26020

Clear / Silver Grip Plates / Blade-Tech Tek-Lok Holster

26023

Yellow / Black Grip Plates / Blade-Tech Tek-Lok Holster

26026

Yellow / Silver Grip Plates / Blade-Tech Tek-Lok Holster

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASERâ&#x201E;˘ X26E

WITH INTEGRATED LASER SIGHT, LOW-DENSITY LIGHTS, EXTENDED DIGITAL POWER MAGAZINE (XDPM), DATAPORT DOWNLOAD CAPABILITY TASER X26E WITH XDPM & TASER EXOSKELETON HOLSTER

C Models #26013 and #26012 shown with 25" (7.6m) XP TASER Cartridge Sold Separately

TASER X26E WITH XDPM & BLADE-TECH TEK-LOK HOLSTER

Head Office: 1-866-652-2877

West: (604) 526-1631

DESCRIPTION

26013

Black / Silver Grip Plates / TASER eXoskeleton Holster

26016

Black / Black Grip Plates / TASER eXoskeleton Holster

26019

Clear / Black Grip Plates / TASER eXoskeleton Holster

26022

Clear / Silver Grip Plates / TASER eXoskeleton Holster

26025

Yellow / Black Grip Plates / TASER eXoskeleton Holster

26028

Yellow / Silver Grip Plates / TASER eXoskeleton Holster

26012

Black / Silver Grip Plates / Blade-Tech Tek-Lok Holster

26015

Black / Black Grip Plates / Blade-Tech Tek-Lok Holster

26018

Clear / Black Grip Plates / Blade-Tech Tek-Lok Holster

26021

Clear / Silver Grip Plates / Blade-Tech Tek-Lok Holster

26024

Yellow / Black Grip Plates / Blade-Tech Tek-Lok Holster

26027

Yellow / Silver Grip Plates / Blade-Tech Tek-Lok Holster

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASER™ DPM AND XDPM

(DPM) DIGITAL POWER MAGAZINE AND (XDPM) EXTENDED DIGITAL POWER MAGAZINE The Digital Power Magazine (DPM) and the Extended Digital Power Magazine (XDPM) contain two lithium 123 batteries which power the TASER X26. The XDPM contains a storage bay for a spare TASER Cartridge and can improve the grip of large-handed officers.

ITEM 26700

26711

26714

DESCRIPTION DPM (Digital Power Magazine) / approximately 195 5second firings at room temperature

ITEM 26701

DESCRIPTION XDPM (Extended Digital Power Magazine) / approximately 195 5-second firings at room temperature

DPM EXTENDED WARRANTIES DPM with 1-Year Extended Warranty

26721

XDPM EXTENDED WARRANTIES XDPM with 1-Year Extended Warranty

DPM with 4-Year Extended Warranty

26724

XDPM with 4-Year Extended Warranty

TASER™ X26 HOLSTER ACCESSORIES ACCESSORIES DESIGNED FOR TASER X26 HOLSTERS AND TASER CARTRIDGES

Head Office: 1-866-652-2877

ITEM

DESCRIPTION

44934

Single Cartridge Pouch w/Tek-Lok Belt Attachment Clip

44935

Dual Cartridge Pouch w/Tek-Lok Belt Attachment Clip

44933

Single Cartridge Pouch Attachment

26899

Tek-Lok BeltAttachment Clip / Can be attached to Blade-Tech and TASER Exoskeleton Holsters

44932

3" Belt Attachment Clip

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASERâ&#x201E;˘ X26 HOLSTERS

HOLSTERS DESIGNED FOR TASER X26 DEVICES AND TASER CARTRIDGES

BLADE-TECH BRAND HOLSTERS

ITEM

DESCRIPTION

Blade-Tech Brand Holsters

TASER BRAND HOLSTERS

44952

Tek-Lok Holster / Right Hand

44953

Tek-Lok Holster / Left Hand

44936

Holster w/ 3" Belt Attachment Clip / Right Hand

44937

Holster w/ 3" Belt Attachment Clip / Left Hand

44920

Thigh Holster w/ Dual Cartridge Holder / Right Hand

44921

Thigh Holster w/ Dual Cartridge Holder / Left Hand

44926

Tek-Lok Holster w/ Single Cartridge Pouch / Right Hand

44927

Tek-Lok Holster w/ Single Cartridge Pouch / Left Hand

44938

Holster w/ 3" Belt Attachment Clip & Single Cartridge Pouch / Right Hand

44939

Holster w/ 3" Belt Attachment Clip & Single Cartridge Pouch / Right Hand

44928

Paddle Holster / Right Hand

44929

Paddle Holster / Left Hand

44924

Tek-Lok Holster w/ Dual Cartridge Pouch / Right Hand

44925

Tek-Lok Holster w/ Dual Cartridge Pouch / Left Hand

44940

Holster w/ 3" Belt Attachment Clip & Dual Cartridge Pouch / Right Hand

44941

Holster w/ 3" Belt Attachment Clip & Single Dual Pouch / Left Hand

44922

Paddle Holster w/Single Cartridge Pouch / Right Hand

44923

Paddle Holster w/Single Cartridge Pouch / Left Hand

TASER Brand Holsters

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

26800

Exoskeleton Holster / Right hand

26801

Exoskeleton Holster / Left hand

26802

Dual Cartridge Holder w/o Tek-Lok Belt Attachment Clip

26804

Quad Cartridge Holder w/o Tek-Lok Belt Attachment Clip

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASER™ CAM

AUDIO / VIDEO RECORDING FOR ENHANCED ACCOUNTABILITY With the TASER CAM, every potential TASER X26 deployment can be recorded with full audio and video - even in zero light conditions. The TASER CAM is an audio-video recording device integrated into a rechargeable TASER X26 power supply that replaces the standard Digital Power Magazine (DPM). The TASER CAM is activated anytime the safety switch is in the up (armed) position. This allows officers to capture vital information prior to, during, and after the potential deployment of a TASER X26 device. The TASER CAM interfaces using a Universal Serial Bus (USB) "plug and play" adapter to connect any Windows 2000, or Windows XP-based computer. The TASER CAM is an optional upgrade compatible with all TASER X26 devices and provides another layer of accountability to support officers reports. A wall charging unit is included.

Actual Video

(Windows is a trademark of the Microsoft Corporation)

ITEM

DESCRIPTION

26750

TASER CAM Audio/Video Recording for Enhanced Accountability

26751

CE - Continental Europe. TASER CAM Audio/Video Recording for Enhanced Accountability

26752

GB - Great Britain. TASER CAM Audio/Video Recording for Enhanced Accountability

Connect USB cabe to the bottom of the TASER CAM unit to interface with computer Computer and TASER X26 sold separately

USB DATAPORT DOWNLOAD KIT DOWNLOADS TASER X26 DATA FOR UP TO 1,500 DEPLOYMENTS

The X26 has a highly advanced download function that can help protect an officer from claims of excessive use of force by providing complete and accurate documentation of the time and date for each firing. The dataport also provides law enforcement with a powerful management tool to track usage patterns and prevent misuse. The X26 download interface uses a USB adapter to connect to any Windows™ 98, 2000, XP or ME computer. The simplicity of USB makes using the dataport an easy, fast process. The cable connects to the X26 device through the DPM compartment. (Windows is a trademark of the Microsoft Corporation)

ITEM

DESCRIPTION

26500

USB Dataport Download Kit / Windows® 98 SE, NT, 2000, XP Compatible

Connect USB cable to the bottom of the TASER X26 to interface with computer. Computer and TASER X26 sold separately.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASER™ X-RAIL™

RIFLE ATTACHMENT CLIP MOUNTS TASER X26E TO PICCATINNY RAIL SYSTEMS The X-Rail mounting system allows the attachment of the TASER X26E device to military and law enforcement rifles through a Piccatinny Rail, an accessory that allows the attachment of items such as lights, sighting systems, and now the TASER X26E. The X-Rail was originally developed by TASER International to support the U.S. military efforts in Iraq and Afghanistan. The integration of the TASER X-Rail and X26 into the weapon platform allows officers to make split second transitioning from lethal to non-lethal force.

TASER X26 with 21" (6.4 m) TASER Cartridge and tactical rifle (all sold separately)

ITEM

DESCRIPTION

85001

X-Rail - Rifle Attachment Clip / Mounts X26 to Piccatinny Rail / For X26E Only

TASER™ CARTRIDGES REPLACEABLE CARTRIDGE WHICH DEPLOYS TWO SMALL PROBES ATTACHED TO THE TASER DEVICE The X-Rail mounting system allows the attachment of the TASER X26E device to military and law enforcement rifles through a Piccatinny Rail, an accessory that allows the attachment of items such as lights, sighting systems, and now the TASER X26E. The X-Rail was originally developed by TASER International to support the U.S. military efforts in Iraq and Afghanistan. The integration of the TASER X-Rail and X26 into the weapon platform allows officers to make split second transitioning from lethal to non-lethal force.

ITEM

DESCRIPTION FIELD USE

44200

21 ft. (6.4 m) Silver Blast Door / Field Use

44203

25 ft. (7.6 m) XP (Extra Penetration) Green Blast Door / Field Use TACTICAL FIELD USE

44206

35 ft. (10.7 m) XP (Extra Penetration) Non-Reversible / Orange Blast Door / Tactical Field Use TRAINING USE

Head Office: 1-866-652-2877

West: (604) 526-1631

34200

15 ft. (4.6 m) Yellow Blast Door / Training Use

44205

21 ft. (6.4 m) Non-Conductive Simulation Blue / Blue Blast Door / Training Use

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER ADVANCED TASER™ M26

WITH INTEGRATED LASER SIGHT AND DATAPORT DOWNLOAD CAPABILITY The ADVANCED TASER M26 is an electronic control device manufactured by TASER International, Inc. Electronic Control Devices (ECD) use propelled wires or direct contact to conduct energy to affect the sensory and motor functions of the nervous system.

The ADVANCED TASER M26 uses a replaceable cartridge containing compressed nitrogen to deploy two small probes that are attached to the ADVANCED TASER M26 by insulated conductive wires. The ADVANCED TASER M26 transmits powerful electrical pulses along the wires and into the body affecting the sensory and motor functions of the peripheral nervous system. The energy can penetrate up to two inches of clothing. The cartridges are available with various wire lengths from 15' to 35' (4.2 meters to 10.6 meters). The M26 has an internal memory that stores a record of every deployment.

Model #44000 shown with 25' (7.6 m) XP TASER Cartridge sold separately

ITEM

DESCRIPTION

44000

ADVANCED TASER M26 Black / Yellow labels

44005

ADVANCED TASER M26 Yellow / Black labels

Model #44005 shown with 25' (7.6 m) XP TASER Cartridge sold separately

SERIAL DATAPORT DOWNLOAD KIT A

ITEM

DESCRIPTION

44500

Serial Dataport Download Kit / Compatible w/Windows 98, NT, ME, 2000, XP Operating Systems (Serial Port Required)

The ADVANCED TASER M26 has a built-in audit tracking system, which protects officers from claims of excessive use of force by providing documentation of the time and date for its most recent 585 deployments. The dataport on the ADVANCED TASER M26 uses an Ethernet style connector on the outside of the weapon. The software necessary to download this information is included in this kit.

Computer and ADVANCED TASER M26 sold separately

SECONDARY CARTRIDGE CLIP Holds one TASER™ cartridge.

ITEM

DESCRIPTION

44860

Secondary Cartridge Clip / Holds 1 TASER Catridge

44700

8 NiMH Batteries with Magazine

40403

NiMH Battery - Single Battery

44710

NiMH Battery Charger

44705

NiMH Battery Charger and 8 NiMH Batteries w/Magazine

8-PACK NiMB BATTERIES WITH MAGAZINE Unlike older Nickel-Cadmium (NiCad) batteries, the Taser Nickel Metal Hydride (NiMH) batteries will never develop a memory problem. You don`t have to worry about fully discharging batteries before recharging. In fact, the Taser battery charger uses an intelligent microprocessor to calibrate the batteries carefully to avoid overcharging and ensure a quick, accurate, full charge every time. Further, Taser Battery terminals are certified compliant with the Advanced Taser battery magazine.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER ADVANCED TASERâ&#x201E;˘ M26 HOLSTERS

HOLSTERS DESIGNED FOR ADVANCED TASER M26 DEVICES & TASER CARTRIDGES ITEM

DESCRIPTION

Blade-Tech Brand Holsters

44854

Tek-Lok Holster / Right Hand

44874

Tek-Lok Holster / Left Hand

44855

Tek-Lok Holster w/ TB* / Right Hand

44875

Tek-Lok Holster w/ TB* / Left Hand

44930

Tek-Lok Holster w/ Hood / Left Hand

44931

Tek-Lok Holster w/ Hood / Right Hand

44960

Tek-Lok Holster w/Single Cartridge Pouch / TB* / Right Hand

44961

Tek-Lok Holster w/Single Cartridge Pouch /TB* / Left Hand

44944

Tek-Lok Holster w/ Dual Cartridge Pouch / TB* / Right Hand

44945

Tek-Lok Holster w/ Dual Cartridge Pouch / TB* / Left Hand

44946

Holster w/ 3" Belt Attachment Clip / Dual Cartridge Pouch / TB* / Right Hand

44947

Holster w/ 3" Belt Attachment Clip / Dual Cartridge Pouch / TB* / Left Hand

44942

Holster w/ 3" Belt Attachment Clip / Single Cartridge Pouch / TB* / Right Hand

44943

Holster w/ 3" Belt Attachment Clip / Single Cartridge Pouch / TB* / Left Hand

44852

Paddle Holster / Right Hand

44871

Paddle Holster / Left Hand

44853

Paddle Holster w/ TB* / Right Hand

44872

Paddle Holster w/ TB* / Left Hand

44956

Paddle Holster w/ Dual Cartridge Pouch / TB* / Right Hand

44957

Paddle Holster w/ Dual Cartridge Pouch / TB* / Left Hand

44948

Paddle Holster w/ Single Cartridge Pouch / TB* / Right Hand

44949

Paddle Holster w/ Single Cartridge Pouch / TB* / Left Hand

44877

Thigh Holster w/ Dual Cartridge Holder / Hood / Right Hand

44876

Thigh Holster w/ Dual Cartridge Holder / Hood / Left Hand

44856

Thigh Holster w/ Dual Cartridge Holder / TB* / Right Hand

44878

Thigh Holster w/ Dual Cartridge Holder / TB* / Left Hand

Ballistic Nylon Holsters

Head Office: 1-866-652-2877

West: (604) 526-1631

AA BB

Prairies: 1-866-652-2877

44830

Ballistic Nylon Thigh Holster / Right Hand

44835

Ballistic Nylon Thigh Holster / Left Hand

44831

Ballistic Nylon Thigh Holster Belt Clip Only

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASER™ XREP

TASER EXTENDED RANGE ELECTRONIC PROJECTILE (XREP™) WORLD’S FIRST 12-GAUGE WIRELESS NEURO MUSCULAR INCAPACITATION (NMI) PROJECTILE Introducing the TASER™ XREP™ – eXtended Range Electronic Projectile. The XREP projectile is self contained, wireless, and fires from a 12-gauge shotgun. It delivers the same neuromuscular incapacitation (NMI) bio -effect as our handheld TASER X26, but can be delivered to a distance of 65 feet (20 meters), combining blunt impact with field-proven TASER NMI. The core technology that made the XREP projectile possible is its engine. A stunning engineering achievement, the XREP engine provides the same bioeffect as our field-proven X26, but from an electronics package that weighs only 3.4 grams and consumes less than one tenth of a cubic inch. In order to achieve a wireless projectile, the battery is fully integrated into the chassis and provides the power to drive the XREP projectile engine for its full 20-second cycle. The XREP cartridge comes pre-packaged in a shell that is compatible with most existing smoothbore and rifled barrel 12-gauge shotguns. The transparent shell ensures officers properly identify the XREP cartridge prior to loading it in the shotgun. As the XREP cartridge is deployed, a rip cord attached between the shell and the projectile activates the projectile. Once activated, the XREP projectile is “live” as it comes out of the barrel. The XREP projectile autonomously generates neuromuscular incapacitation for 20 continuous seconds – enough time to close the distance and take the offender into custody without risking injury to officers.

12-gauge cartridge

Projectile Weight:

13.5 grams (~ 0.5 ounces)

Complete Cartridge Weight: 20 grams (~ 0.7 ounces)

Not only does the XREP projectile incorporate a revolutionary electronic payload, it also incorporates a radical new spin stabilization technology to maximize accuracy. As the XREP projectile leaves the barrel, 3 torsion spring fins deploy, causing the projectile to spin, even when launched from a smoothbore barrel, providing superior accuracy and flight stabilization. The TASER XREP projectile launch velocity is approximately 260 feet per second. The nose assembly of the XREP projectile contains four forward facing barbed electrodes. On impact, the forward facing barbed electrodes attach to the body of the target. The energy from the impact breaks a series of fracture pins that release the main chassis of the XREP projectile which remains connected to the nose by a Deployment Cord. As the chassis falls away, six Cholla electrodes automatically deploy. Named after the famous desert cactus, the Cholla electrodes penetrate clothing to deliver the TASER XREP projectile’s powerful NMI effect over a greater body mass.

Size:

Min. Safe Distance:

15 feet (4.5 meters)

Max. Effective Distance:

65 feet (20 meters)

Projectile Stabilization:

Torsion spring fins that extend when the XREP™ projectile leaves the barrel and create spin stabilization for accuracy.

Energy Source:

(1) 3 volt Lithium battery

Delivered Electrical Effect:

TASER® Neuro Muscular Incapacitation (NMI) in a self-contained projectile system. The XREP projectile is designed to achieve NMI through the reflex engagement electrodes. The pain from impact as well as the electrical discharge through the front facing dart points of the XREP projectile head will cause a physiological response in the target to remove the source of pain by grabbing either the nose with its rear facing probes, the Cholla probes of the chassis or the non-insulated electrical wire connecting the nose and chassis, thereby completing an electrical circuit beyond the ability to let go with sufficient spread resulting in NMI. Alternatively, the Chollas may penetrate the skin due to the recoil from the projectile impact with the target or from the movement of the target after impact with sufficient spread to produce NMI. Also, in some cases, the electrical discharge through the frontal electrodes in the nose alone may cause NMI.

Temperature Range:

0 °C (32 °F) to +50 °C (+122 °F)

Leading Edge Technology:

The world’s first wireless TASER® Electronic Control Device

Launch platform:

Designed for TASER X12 Dedicated Less-Lethal Shotgun and will operate in any standard 12-gauge pump action shotgun. A semiautomatic may ONLY be used if the operator manually cycles each cartridge through the chamber.

Min. Chamber Size:

2 3⁄4 inches. The XREP cartridge may be fired from chamber sizes larger than 2-3/4 inches (e.g. 3 inches).

Barrel Type:

Smooth bore (cylinder bore) or rifled bore. The XREP cartridge will fire from a smooth or rifled barrel provided the choke constriction is no more than Improved Cylinder (.010 inches)

Deployed

Live / Field Use

Inert / Practice Use

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASER™ X12

LESS-LETHAL SHOTGUN BY MOSSBERG

Radial™ Ammunition Key System Proprietary new patent-pending Radial Ammunition Key technology prevents the system from accepting lethal 12 gauge rounds, eliminating the possibility of loading lethal ammunition during high stress situations.

High Twist Rifling For Low Velocity Rounds Based on the Mil-Spec Certified Mossberg® 500 platform, the TASER X12 features a custom 1–in–18 twist rifle barrel optimized to spin stabilize low velocity projectiles.

TASER - Yellow™ Coloration TASER - Yellow™ coloration of the stock and forend of the shotgun for immediate identification as a TASER less-lethal system.

TASER X-Rail™ Mounting System A Picatinny Rail system with the TASER X-Rail mount preinstalled that allows the user to attach a standard TASER X26 Electronic Control Device (ECD) (sold separately) to the TASER X12 Less-Lethal Shotgun (LLS). Tactical Collapsible Stock Collapsible, six-position buttstock with pistol grip and tactical buttpad is California compliant and made from glass-filled nylon. Pre-drilled holes for tactical shotshell holder (sold separately). Stock changes length of pull from 9-1/4" to 13-1/4". Sling swivel stud included. Ghost Ring Sight Ghost Ring Sight (GRS) are similar to a rifle sight, except a small hole in the rear sight aperture is used for alignment with the front sight blade. The eye's natural instinct to quickly obtain the clearest view helps center and align the front and rear sight picture. Optimized For The TASER™ XREP Projectile The TASER X12 Less-Lethal Shotgun is a fully integrated less-lethal platform manufactured by Mossberg that has been optimized for the TASER XREP eXtended Range Electronic Projectile.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

LESS LETHAL SOLUTIONS Less Lethal Solutions by TASER TASER™ ACCESSORIES & TRAINING

MAINTENANCE & CLEANING KIT

ITEM

DESCRIPTION

85002

X26 / M26 Maintenance & Cleaning Kit

This cleaning kit is designed for periodic maintenance and specialized cleaning in the event of bio-hazard contamination to the TASER unit. Materials and instructions provided are essential to maintain the integrity of the electronics and prevent foreign materials from accumulating in the unit. The kit includes:

SIMULATION TRAINING SUIT

10 qty 5 qty

IPA Alcohol Swabs PDI SUPER SANI-CLOTH

(for removing potential biohazard material from unit)

5 qty

E.S.D. Bags

(for safe disposal or return of cartridges or TASER units)

1 qty 1 qty

PRACTICE TARGET B

TASER Logo Safety Glasses Cleaning Guide

(Compressed Air recommended but not included in kit)

ITEM

DESCRIPTION

80002

Practice Target / Single Target / Training Use

The TASER paper practice target is specially treated with metal to allow students to see how the energy is transferred from the TASER system to a remote target. It is scored with a bull's eye and human body.

ITEM

DESCRIPTION

44550

TASER Simulation Training Suit / For Scenario Based Training Exercises

The TASER Simulation Training Suit allows live scenario-based training in which students can fire at dynamic targets. This is used in conjunction with the TASER Simulation Cartridges and protects the student from its shortened barbs. Note: The drive stun feature of this TASER Cartridge is still LIVE and the Simulation Suit does not entirely prevent its effects. Suit includes gloves, body, and head protection.

Duty Nylon Taser Holsters by MDC TASER™ HOLSTERS RCMP SPEC TASER THIGH HOLSTER

RCMP SPEC M26 TASER BELT HOLSTER High quality taser belt holster built to RCMP specifications. Two holders for replacement air cartridges. Swivel clip. Available in both left and right configurations. NDTH69L & R

High quality taser thigh holster built to RCMP specifications. Two holders for replacement air cartridges. Available in both left and right configurations. NDTH67L & R

WAIST PACK Material: Nylon 44840

M26 TASER VERTICAL SHOULDER HOLSTER Available in right or lefthanded versions. NWSH65-R

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAINING & EQUIPMENT Training Equipment by ASP

Dynamic training demands products of the highest quality. When training must be intense and it has to be safe, you can't afford less than ASP.

SAFETY SETS are designed for use in the handcuff and baton training environment.

AS-37900

TRAINING BATONS AND CARRIERS BLACK BATON BAG Training Bags are designed for the rigors of defensive measures instruction.

AS-7201

AS-7200

TRAINING BELTS

Belt Size

Ballistic Weave Training Belts with easy snap-lock closure are available with die struck insignia featuring the ASP Eagle or ASP Eagle Certified.

S M L XL

MAINTENANCE KITS

Training Batons in 26" (7200) and 21" (7201) lengths combined with Carriers (7203) to reduce injury potential while allowing dynamic high level simulations.

AS-7102

ASP Eagle

Eagle certified

AS-09831 AS-09832 AS-09833 AAS-09834

AS-09835 AS-09836 AS-09837 AS-09838

(5102) retain the safety of Training Batons

Embroidered Hat AS-09800

Apparel Size Roll Bag 9871

Locks 9508, 9509

TRAINING CLOTHES

LUGGAGE Luggage Tag 9507

Black

Gold

Transport of the accessories used in training is provided by fully lined ballistic weave Roll Bags, three disk Luggage Locks and engraveable Luggage Tags.

9206

9103

ASP Insignias provide die struck excellence in solid brass.

9204

9301

UNIFORM BARS 9208

EMBROIDERED PATCHES are available in six-colour embroidery featuring an ASP logo.

West: (604) 526-1631

CHALLENGE COIN

9203

9104

Head Office: 1-866-652-2877

AS-09801 AS-09802 AS-09803 AS-09804 AS-09805 AS-09812

Training hats & golf-style shirts come in basic black and carry the six colour, fully embroidered ASP Eagle Logo. Shirts are 50/50 polyester cotton and feature a two-button front pocket.

LAPEL PINS

9106

S M L XL XXL XXXL

Shirt

9210

9305 9306

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLASSIC KNIVES are precision ground from the finest surgical stainless steel. They display both the ASP and Strike Force insignias in Nickel Silver.

TRAINING & EQUIPMENT

Training Equipment by ASP RED GUNS RED GUNS™ AND TRAINING ACCESSORIES

Red Guns™ are realistic, lightweight replicas of actual law enforcement equipment. They are ideal for weapon retention, disarming, room clearance and sudden assault training. 7341

Beretta 96D 7351

Beretta 7301

FN Forty-Nine 7331

Glock 7302

Glock G36 7333

H&K USP .45 Compact 7326

SIG P225 7335

S&W 10mm/.45 7305

Government .45 7308

Kahr 7318

SIG P245 7329

S&W J Frame 7306

7342

Beretta Compact 7315

Beretta Couga 7323

Glock Compact 7311

H&K P2000 7336

Glock Sub-Compact 7319

H&K P2000 Compact 7338

SIG 220/226 7303

SIG Pro 7328

S&W K Frame 7306

Head Office: 1-866-652-2877

SIG 228/229 7312

S&W 9mm 7304

S&W Sigma 7317

West: (604) 526-1631

Taser X26 7340

Beretta Cougar Compact 7325

Taser M26 7339

Browning 7314

Glock 10mm/.45 7307

Glock 10mm/.45 Sub-Compact 7322

H&K USP 7316

H&K USP Compact 7324

SIG 239 7320

S&W .40 7309

S&W Sigma Compact 7321

Prairies: 1-866-652-2877

SIG P2022 7337

S&W 9mm/.40 Compact 7313

Walther P99 7327

East: 1-877-993-9968

TRAINING & EQUIPMENT

Training Equipment by ASP RED GUNS

Government Carbine 7407

Heckler & Koch UMP 7406

7408 H & K G36

Government M16 7403 Government Magazine 7458

Beretta Magazine 7457

Steyr AUG 7405

Triad 7455

Motorola Radio 7452

7394

Knife 7451

Remington 870 7401

Streamlight Flashlight 7453

Government SMG 7404

Head Office: 1-866-652-2877

Heckler & Koch MP5 7402

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAINING & EQUIPMENT ASP Training by MD CHARLTON & ASP

ASP INSTRUCTOR CERTIFICATION (AIC) PROGRAM

M.D. Charlton Co. Ltd. is the exclusive Canadian distributor for Armament Systems & Procedures, Inc. (ASP) products. In conjunction with M.D. Charlton Co. Ltd., ASP offers extensive training programs in the safe and effective use of its expandable baton.

The AIC Program is a 16-hour, "hands on" seminar, designed to train participants in operational use of the ASP Tactical Baton. The program is simple to learn and easy to understand. It provides efficient defensive impact weapon tactics for law enforcement personnel without long hours of training. The techniques are designed to work effectively for all law enforcement officers, male and female, large and small, fit as well as officers in less than peak physical condition. The AIC Program provides carrying (transportation) and drawing (presentation) procedures, as well as striking (impact) techniques. These tactics are quickly learned, easily practiced and readily maintained long after the program is completed. The ASP Tactical Baton is designed to be used

as an impact weapon, not a come-along device. Techniques taught in the AIC Program follow this standard. There are no complicated holds or complex moves. Because of this, the ASP program avoids the training complexities which often plague other baton programs. The ASP Instructor Certification (AIC) Program is based on modern, court-defensible police standards for less-than-lethal use of force. By the end of the AIC Program, participants will be prepared to instruct other law enforcement personnel in operational use of the ASP Tactical Baton. The program participants will have a basic understanding of the conditions in which the baton may be used, justification for use, and how to document these actions.

Defense Technology Training by MD CHARLTON & DEFENSE TECHNOLOGY

M.D. Charlton Co. Ltd. is a Canadian distributor for Defense Technology Corporation of America (Def-Tec) products. In conjunction with M.D. Charlton Co. Ltd., Def-Tec offers extensive training programs in the safe and effective use of:

LESS-THAN-LETHAL

CHEMICAL MUNITIONS

This one-day Program is aimed at the experienced officer or training officer and is designed to certify in the instruction of Less-Than-Lethal Munitions. This course will include practical, hands-on exercises with 12-gauge and 37mm munitions. Course Outline: Introduction to Specialty Munitions; Development of Policies and Procedures; Skip and Direct Firing Techniques; Weapons and Munitions Selection; Handson/Live Firing Exercises.

This comprehensive two-day Instructor Certification Program is designed to certify the experienced officer or training officers in the instruction of the use of chemical agents. It is aimed primarily at law enforcement/correctional personnel who will be required to return to their respective departments and instruct on the subject of chemical munitions. This program has been revised to include the Aerosol Projector Instructor Certification. Course Outline: Development of Policies and Procedures for Use; Types and Forms of Chemical Agents; Use of FIRST DEFENSE; Protective Masks - Types and Nomenclatures; Determining Incapacitating and Lethal Doses; Criminal and Civil Liabilities; Live Fire Exercises on all Weapons and Launchers.

OC (OLEORESIN CAPSICUM) This one-day Instructor Certification Program is designed to prepare those officers responsible for the training and carrying of FIRST DEFENSE. Instruction will include the mechanical operation of all types of aerosols and delivery systems as well as practical application for effective accuracy. Course Outline: Types of Agents/Projectors; Criteria for Selection; Operational Guidelines; Solvents & Carriers; Propellants; Safety Factors; Decontamination; Practical/Hands-on Exercises; Criminal & Civil Liabilities.

WARNING: Failure to read may result in injury, disability or death: 1. RedMan is ONLY for law enforcement, corrections, security and military defensive tactics simulation training conducted at authorized force. RedMan cushions only covered target areas against practice techniques; punches, kicks, and knee, elbow and practice baton strikes. Except as provided below, head contact is disallowed. RedMan does not protect uncovered body parts or against jabs or impacts from sharp, pointed objects. Only Macho approved foam-covered training batons may be used with RedMan. 1. DEFINITIONS Moderate force is enough force to be felt, but not to injure. Light force does not cause pain or injury, the transfer of shock from kinetic energy ("fluid shock"), or rocking of the head. Simulation training is self defense and law enforcement, corrections, security, and military defensive tactics simulation training conducted by qualified instructors within the parameters of RedMan instructions, warnings and guidelines. 2. AUTHORIZED FORCE The following levels of force are authorized with RedMan: (a) Enhanced Suit: With the Enhanced suit light force only is allowed to the covered head, throat, neck, spine, and other areas made vulnerable by positioning or unusual circumstances and no more than moderate force is allowed to the groin and other non-vital target areas; (b) Traditional Suit: only moderate force is allowed to proper target areas with the Traditional RedMan Suit and the head, neck, spine, kidneys, and groin are not authorized targets. 3. MISUSE. Do not use RedMan for other or unauthorized applications. Examples of misuse include but are not limited to: Blows or strikes to uncovered or unauthorized target areas: full force blows; use of RedMan for/with: active-duty impact weapons; active duty (e.g)., crowd control, cell extractions or combat activities); use as personal protective gear outside of training, butting or ramming with the head, striking fixed objects, including fixed body parts, especially to an immobilized head (for example, where "braced" against a wall, floor, or hard object); use of weapons, including live OC sprays, use of inert OC or other inert sprays without the use of goggles that fully enclose the eyes of all participants; use of props other than soft simulated training props; penetration of the Face Cage by fingers or other objects; and failure to disinfect gear between each use.

DISTRACTION DEVICE This two-day Instructor Certification Program is recognized as one of the finest of its kind. It is designed to certify experienced tactical officers in the safe deployment and training of the No.25 DISTRACTION DEVICE. Instruction includes the mechanical operations of diversionary devices currently available to law enforcement, corrections and military personnel. Attending officers become proficient in the handling, arming, disarming and training of the device. Course Outline: Introduction to Explosives; Types and Nomenclatures of Diversionary Devices; Overpressure - Cause and Effect; Anderson Blasage; Decibels/Candela/P.S.I.; Criminal and Civil Liabilities; Handling/Storage/Rendering Safe.

4. TRAINING WITH REDMAN Proper instruction, conditioning and supervision are required for simulation training with RedMan. Trainers must: be qualified for the course levels that are teaching; thoroughly evaluate training risks and participants, their roles, experience, physical and emotional conditions and equipment needs; set up, choreograph, and supervise each training session; be responsible for proper training procedures and risks posed by training environments and scenarios; and stay abreast of changes in curricula, products, and product warnings and instructions when these occur. The agency conducting simulation training is responsible for selecting qualified trainers, proper training procedures and risks posed by training environments and scenarios. 5. UNAVOIDABLE RISKS RedMan users, trainers, their employers and agencies conducting training assume full responsibility for unavoidable risks of simulation training: death, disability, and/or injury (including injury from accidental blows to vulnerable areas). Used properly, RedMan helps to reduce such risks; it is not guaranteed protection against them. User assumes all risks. 6. FULL SUIT Users recommends that users wear the full RedMan Traditional or Enhanced Suit (as defined in the RedMan product literature) appropriate to their training; use of less than a full suit compromises protection. If it will be adequate in the trainer's judgment, a Partial Suit (as defined the RedMan product literature) may be used for a particular training session. Impact resistant eye protection must always be worn with the Head with Face Cage, if there is any risk of contact to the eyes. Goggles (that fully enclose the eyes) must be worn when training with inert OC spray. 6. WARNINGS AND INSTRUCTIONS. RedMan is not a training system; Macho is not responsible for training systems, curricula or errors in their application. Prior to use, users, trainers, their employers and agencies conducting training must familiarize themselves with RedMan equipment and its limitations and read and follow warnings and instructions on the products and in the RedMan literature and materials. DISCLAIMER: Macho makes NO EXPRESS WARRANTIES. The implied warranties of MERCHANTABILITY and FITNESS are excluded and disclaimed.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAINING & EQUIPMENT

Training Equipment by REDMAN PROTECTIVE BODY GEAR BY MACHO

REDMAN INSTRUCTOR WEAPON DEFENSE SUIT (WDS)

FIRST LINE RESPONSE DUTY GEAR – FOR LAW ENFORCEMENT APPLICATIONS

A Suit You Can Shoot At with RedMan-Approved Training Projectiles.

Designed specifically for law enforcement mobile field force applications and crowd control, the DRS 180 provides coverage to the most vulnerable areas of the body: arms, legs and torso. It doesn’t interfere with your duty belt, and you can still wear ballistic or stab resistant vests underneath, as well as other duty gear like a load bearing vest, and thigh holster.

The WDS from RedMan is our newest line of training gear. Once again, we’ve combined input from D.T. trainers with our own expertise in designing quality products and created a suit for blunt trauma protection from initial confrontation to the simulated lethal force of RedMan-Approved Training Projectiles. Now instructors can conduct full-spectrum use-offorce training scenarios in one suit! The WDS incorporates the blunt trauma protection and features of the XP Suit and adds special designs, materials, and enhancements for use with Simunition® FX® Marking Cartridges. Like the XP, it’s form-fitting, maneuverable, and takes D.T. training to yet another level.

DRS 180

RedMan is the only gear on the market today that is quickly and easily cleaned, spray disinfected, and dried after each user. No one wants to share sweat, blood, and disease-causing micro-organisms. Used according to instructions, RedMan keeps officers safer from blunt trauma and from bloodborne (HIV/AIDS, Hepatitis) and other pathogens

REDMAN WDS STUDENT SUIT

• • • •

Covers head, chest, knees and elbows Maximizes mobility for dynamic defensive tactics simulations Affords safe, reality-based training opportunities Accommodates assigned duty gear

The Student Suit is an important part of the total full-spectrum use-of-force scenario providing coverage of key areas for officers simulating defensive tactic techniques against trainers outfitted in the WDS Instructor Suit. The Student Suit comes with the same advanced Head Gear as the Instructor Suit - the foam Head, Safety Glasses, a Mask with lens, and the Head Vent Cover. These four items should be worn together for maximum protection. The Student Suit is also equipped with a Body Guard, Elbow-Forearm, Groin, and Knee-Shin Guards. The fit, comfort and protection of the Student Suit allows officers to get the most out of their training experience. Trauma protection is immediately evident - with maximum protection to the vital areas of the head, and chest with the added value of impact mesh for encounters with stray RedMan-approved training projectiles. The elbows and knees are flexible, enabling maximum movement. Students can also share equipment because it’s quick to put on and take off using Velcro® strapping. It can be cleaned, spray disinfected and dried for the next person in minutes - plus the closed cell dipped polyethylene foam creates a barrier that provides a level of protection from blunt trauma and from bloodborne (HIV/AIDS, Hepatitis) and other pathogens.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

A new generation of Duty Gear, the DRS 180 provides maximum blunt-trauma protection with the comfort and mobility you need to safely and successfully complete your mission. It’s extremely tough and durable with a triple layer construction featuring an outer lining covered with patented Nomex fabric, inner layers featuring a closed-cell foam construction with a trauma plates sandwiched between the foam for added protection and an inside lining made with a patented, waterproof polyurethane-coated nylon that makes the DRS impervious to blood-borne pathogens, and can be cleaned and disinfected after each use. Contoured design and adjustable straps make it comfortable, flexible and easy to put on. The features and benefits of this suit are unmatched. The DRS 180 suit is designed as a complete System for crowd management and includes the DRS 180 Torso, DRS 180 Legs and DRS 180 Elbows.

FIRST LINE RESPONSE DUTY GEAR – CORRECTIONS DRS 360 - Full-coverage The DRS 360 safeguards against various blunt trauma assaults. Officers trained and experienced in cell extractions, snatch & grab teams and frontline riot/crowd control will value the construction of this suit. The formidable, no-nonsense design acts as a powerful visual deterrent, and discourages grabbing DRS 360 and clutching by an inmate due to the “no-grip” design. Triple layer construction outer lining is patented Nomex fabric, which is flame resistant, treated to be water resistant, and easy to clean. Inner layers feature closed-cell foam with trauma plates sandwiched between the foam for added protection. The inside lining is made with a patented, waterproof polyurethane-coated nylon that is impervious to blood-borne pathogens and can be cleaned and disinfected after each use. Contoured design and adjustable straps make the DRS comfortable, maneuverable and easy to put on. The features and benefits of this suit are unmatched. The DRS 360 suit is designed as a complete System for Corrections Applications and includes the DRS 360 Torso, DRS 360 Legs and DRS 360 Arms.

East: 1-877-993-9968

TRAINING & EQUIPMENT

Training Equipment by REDMAN PROTECTIVE BODY GEAR BY MACHO THE REDMAN XP The new RedMan XP Suit offers the best protection with the greatest mobility to ever with thinner foam and thicker plastic. And the new Ripped-look plastic disperses more impact than ever before because it’s now twice as thick. New extended, form fitted design allows for more coverage with smaller gaps in protection, ever for the bigger trainee.

REDMAN • FOR REALISTIC TRAINING AND SIMULATION • FOR ON-THE-STREET CONFIDENCE

• FOR BETTER RISK MANAGEMENT • FOR PROFESSIONAL DISCIPLINE

SHOULDER GUARD - MP-SHLD100 Designed to interlock with the Body Guard, it covers and cushions the shoulders and biceps from training batons or unarmed strikes. The Body Guard must be worn to properly attach the Shoulder Guard.

TRADITIONAL HEAD - MP-HWC 1" thick foam provides greater protection from accidental contact during moderate level simulations. Attachable cage and safety glasses. Sizes: M,L,XL. THROAT GUARD - MP-THE100

ARM GUARD XP- MP-AGXP105

Attaches easily to the Head and gives layered protection to throat.

Double foam layer gives extra coverage for training with practice batons and for unarmed combat drills. Unique hand grip designed for extra comfort.

BODY GUARD XP- MP-BGXP Increased protection to shoulders, chest and abdominal area as well as the back. Reinforced in front with an extra layer of foam and a plastic trauma plate. Adjustable straps for fit. Sizes: S/M,L/XL.

LOWER ABDOMINAL PAD - MP-LAP100 Greater protection to lower abdomen while not restricting mobility. Rear Guard must be worn to properly attach Lower Abdominal Pad.

THIGH GUARD XP- MP-TGXP Increased protection to the thigh and knee against blows from practice batons or from foot and knee strikes. Can be used with Shin/Knee Guard for double knee protection. For proper support wear with Thigh Guard Belt (not shown).

LOWER LEG GUARD XP - MP-LLXP Completely new design with Ripped Look plastic knee cap and along the shin provides the most protection ever. Stays securely in place during dynamic simulations.

REAR GUARD - MP-RG100 High density foam gives greater protection to buttocks from training baton strikes, falls and wall stuns. It allows excellent maneuverability during structural simulations. Product Code - AMARG100.

CALF GUARD - MP-CALF100 Designed to individual specifications, this innovative Calf Guard wraps around to provide full coverage against training batons during simulations.

Also Available: • Full Head - MP-HP 1" thick foam covers the head including the side of the face and the chin. • Elbow - MP-EKG120 • Knee - MP-EKG140 Gives more protection to elbows and knees for multiple force options during dynamic structural simulation training.

REDMAN STUDENT SUIT The RedMan Student Suit is an important part of the total simulation training program, enabling officers to do more than just walk through light contact scenarios. They participate in real, streetlike simulations safely.

• • • •

Permits students to participate in life-like simulations. Increased protection of head, chest, knees, and elbows. Easy to put on and take off, clean and disinfect. Maximum mobility even worn over duty belt.

TRADITIONAL HEAD - MP-HWC

ELBOW/KNEE GUARDS

1" thick foam provides greater protection from accidental contact during moderate level simulations. Attachable cage and safety glasses. Sizes: M,L,XL.

Reduces impact to the elbows/knees from surrounding environment MP-EFG (Elbow)

MP-KSG (Knee).

STUDENT BODY GUARD - MP-BGS Helps prevent chest and back and is reinforced in the front with an extra layer of foam and a plastic trauma shield.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAINING & EQUIPMENT Training Equipment by REDMAN PROTECTIVE BODY GEAR BY MACHO

REDMAN XP PLUS ENHANCED SUIT This all-new product gives trainers the ability, for the first-time, to build simulations that prepare an officer to properly deal with officer survival situations. In addition to the Traditional RedMan Suit these have been added or substituted:

INNER CHEST GUARD MP-ICG135

ENHANCED HEAD ASSEMBLY MP-HEA

INNER FOREARM GUARDS MP-SG125P

Provides additional protection to the head, throat & neck... used when instructor is struck in the head area

Additional protection to arms from strikes... for the instructor performing light contact punches at the student and student is blocking. Or if instructor is being hit in the arm with a simulated weapon.

Additional protection to torso... used when instructor is struck repeatedly in the same area or on the ground being punched.

ENHANCED LOWER ABDOMINAL PAD MP-LAPE100

FOOT GUARDS XP MP-FGXP105

Provides additional protection to groin area. (moderate force)

For the instructor when kicking students with light contact, or when being struck with baton or foot stomp.

ADDITIONAL REDMAN BODY GEAR INNER CHEST GUARD

BODY GUARD XP PROTECTOR

Worn under RedMan Body Guard, molded design gives added protection against repeated blows. Two layers of foam laminated to a thermo- formed plastic shield.

Protects Body Guard XP from abrasions so you can conduct dynamic weapons control simulations without damage to Body Guard XP. Made from tough vinyl, it attaches securely to the Body Guard with Velcro attachments.

Product Code - MP-ICG135.

Product Code - MP-BGPXP

SAFETY GLASSES Made of impact and shatter resistant Lexan. Eye protection must be worn under RedMan headgear during training. Fog and scratch resistant Product Code - MP-RMGLB

FEMALE GROIN GUARD Encapsulated Plastic cup that provides a comfortable, snug fit.

“NO FOUL” GROIN GUARD

CLOTH GUARDS

Velcro straps allow it to be put on after other gear. Hard shell cup in closed cell foam. Wear alone or over standard cup for extra protection.

Tightly woven fabric with 1/2” padding. Can be worn under RedMan gear. Non Slip. Springs back to shape after washing.

Product Code - MP-GGM

Product Code - MP-GGF

Product Code - MP-CGEL (elbow) SIZES: ADULT, XL Product Code - MP-CGS (shin) SIZES: S, M, L Product Code - MP-CGKN (knee) SIZES: S, M, L Product Code - MP-CGH (hand) SIZES: ADULT

MOUTHGUARDS Designed by dental experts and made of non-toxic clear space age polymer. Product Code - MP-MGA single MP-MGD double

POWER HANDS

SHIN/KNEE GUARDS

SELF DEFENSE PUNCH

Heavy Z-gel weighted gloves make standard bag gloves and mitts obsolete. Use with or without handwraps.

Gives added protection to the shin, ankle, instep and top of the foot from blows.

Dynamic simulations or light contact to face cage on enhanced head. Palm coverage for palm strikes.

Product Code - MP-FPH10

Product Code - AMASS135

Size: S, M, L Product Code - MP-PSD

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAINING & EQUIPMENT Training Equipment by REDMAN

ADDITIONAL MACHO TRAINING EQUIPMENT

TRAINING MAT

TRAINING BATON

TRAINING OC

STRIKING SHIELD

4' x 8' cross link foam mat. Cushions floor or walls. 11/4" thick.

Lightweight dipped foam with hollow polymer core. Fits flashlight ring of a duty belt for realism. 26” Long and 1.625” Diameter.

Non-flammable and non-toxic. Develops accuracy and skill in both use and avoidance of an aerosol weapon.

Designed to meet the needs of defensive tactics instructors, great for unarmed strikes and baton training. Ideal with RedMan training baton.

Product Code - MP-BAT300

OC Inert - MP-RMOCS

Product Code - MP-KS100P.

Product Code - 4 sided - MP-MATR4SV.

FOREARM SHIELD

MINI TARGET

MESH BAG

EQUIPMENT BAG

Perfect for Knee strikes, punching and kick training. Covers hand to elbow, contoured for comfortable handling. Sold Individually. 17 1/2”H x 11 1/2” W x 2 1/4” D.

Provides target for strategic and accuracy drills. Ideal with Adjustable strap, and finger loop for secure grip. Sold individually. 10” H x 9” W x 3 1/2” D.

Oversized 25”x13”. Open air means no more smelly gym bag! Reinforced heavy duty nylon mesh. Nylon front pocket with zipper.

Holds a full RedMan suit. Sturdy red nylon with black RedMan logo. Wet pocket and removable shoulder strap. 42” x 21” x 17”

Product Code - MP-FAS.

Product Code - MP-MT.

Product Code - MP-EB100

Product Code - MP-EBP120

PROTECTIVE BODY GEAR BY MACHO REDMAN 4X4 PACKAGES The RedMan 4x4 Packages include everything you need to train groups of 4 officers in a 4-hour training session. Each RedMan 4x4 Package includes the 4x4 Accessory Pak.

REDMAN 4X4

REDMAN 4X4 ADD-ON

SPECIAL CONFIGURATIONS PAK

The RedMan 4x4 package is the correct package for any department that wants to reduce the chance for liability in the training room or duty situations

For larger departments who need additional equipment. For departments who want to train more than 4 officers at a time. Each package increases your training class capability by 4 students.

• • • • • • • • • • •

• • • •

1 XP Instructor Suit 4 XP Student Suits XP Special Configurations Pak 4X4 Accessory Pak

• •

4 RedMan Student Suits One 4x4 Accessory Pak

4X4 ACCESSORY PAK

Product code: MP-M006

• • • • •

4 Training Batons 2 Striking Shields 3 Equipment Bags 2 Disinfectant Cleaners 1 Repair Kit

1 Enhanced Head Assembly 1 Pair of Inner Forearm Guards 1 Inner Chest Guard 1 Enhanced Lower Abdominal Pad 1 "No Foul" Groin Guard 1 Pair of Foot Guards 1 Attachable Face Shield 1 Pair of Elbow-Forearm Guards 1 Pair of Self Defense Punches 1 Body Guard Protector 4 Inert OC Sprays

Product code: MP-M008

REDMAN 4X4 EXISTING USER UPGRADE For departments currently using Traditional RedMan Suit. By upgrading your equipment with this package, you can now build the complete array of simulations that you need to reduce the chance for liabilities.

• • • •

The New Enhanced RedMan Suit for Officer Surviva Training 4 Partial RedMan Suits 4x4 Accessory Pak Equipment Warranty

Product code:MP-M007

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAINING & EQUIPMENT Training Equipment by REDMAN REDMAN PRODUCT CODES

M, L, XL M, L, XL M, L, XL M, L, XL S/M, L/XL S/M, L/XL S, M, L One Size - Comes in Pairs One Size - Comes in Pairs One Size - Comes in Pairs One Size One Size One Size - Comes in Pairs One Size - Comes in Pairs One Size 24" 42" x 17" x 15" One Size Glue/Vinyl Repair Kit One Size Adult One Size One Size - Comes in Pairs S, M, L, XL One Size - Comes in Pairs S, M, L, XL One Size M, L, XL S, M, L - Comes in Pairs 17 1/2” x 11 1/2” x 2 1/4” 10” x 9 1/2” x 4” 19-1/2" x 30" x 5-1/2" One Size One Size 16 ounces One Size One Size One Size One Size 26” 4' x 8' (Velcro on 4 Sides) 16 Linear Feet (8' for Each Side) One Size M, L, XL (for HS) Glue/Vinyl Repair Kit One Size One Size 42” x 17” x 21”

MODEL NO.

REDMAN XP SUIT

COLOURS

SIZES

MPRMXP1 MPRMXP2 MPRMXP3 MPRMXP4 MPRMXP5 MPRMPS1 MPRMPS2 MPRMPS3 MPRMPS4 MPRMPS5

Full Suit #1 (with Shield) Full Suit #2 (with Shield) Full Suit #3 (with Shield) Full Suit #4 (with Shield) Full Suit #5 (with Shield) Student Suit #1 Student Suit #2 Student Suit #3 Student Suit #4 Student Suit #5

Red Red Red Red Red Red Red Red Red Red

Body Guard: S/M - Head with Shield: M Body Guard: S/M - Head with Shield: L Body Guard: L/XL - Head with Shield: M Body Guard: L/XL - Head with Shield: L Body Guard: L/XL - Head with Shield: XL Body Guard: S/M - Head with Shield: M Body Guard: S/M - Head with Shield: L Body Guard: L/XL - Head with Shield: M Body Guard: L/XL - Head with Shield: L Body Guard: L/XL - Head with Shield: XL

Head Office: 1-866-652-2877

West: (604) 526-1631

White Red Red Black Red Black

Prairies: 1-866-652-2877

East: 1-877-993-9968

Body Guard: S/M - Head with Shield: M Body Guard: S/M - Head with Shield: L Body Guard: L/XL - Head with Shield: M Body Guard: L/XL - Head with Shield: L Body Guard: L/XL - Head with Shield: XL

Red Black Clear Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red N/A Red, Black, Natural Red Red Red White Red White Red Red Red Red & Black Red/Black Red & Black Clear, Red Clear Spray Clear Black Black Black White Black Aluminum/Velcro Black & Red Clear

Red Red Red Red Red

Traditional Head Cage Replacement Attachable Shield Head with Shield Body Guard Body Guard Protector Self Defense Punch Shoulder Guard Full Arm Guard Thigh Guard Rear Guard Lower Abdominal Pad Shin Knee Calf Guard Throat Guard Training Baton Equipment Bag Thigh Guard Belt Repair Kit Hand Wrap Bag Mitt Power Hands Elbow Elbow Cloth Guard Knee Knee Cloth Guard Inner Chest Guard Full Head Inner Forearm Guard Forearm Shield Mini Target Striking Shield Single Mouth Double Mouth Disinfectant/Cleaner Safety Glasses Simulated OC Spray Inert OC Spray Simulated Radio Training Baton Training Mat Training Mat Strip Focus Target Shield replacement Repair Kit Female Groin Guard Male Groid Guard Equipment Bag Mesh Bag RedMan Pin Red Man Cap

COLOURS

MPHWC MPCAGE MPCOS MPHS MPBGXP MPBGPXP MPPSD MPSHLD100 MPAGXP105 MPTGXP105 MPRG100 MPLAP100 MPSGKN135 MPCALF100 MPTHG100 MPBAT100 MPEBP120 MPTGB MPRKRED MPBOXHW MPBXBM MPFPHL10 MPEKG120 MPCGE MPEKG140 MPCGKN MPICG135 MPHP MPSGP MPFAS MPMT MPKS100P MPMGA MPMGD MPRMCL -16 MPRMGLS MPRMOCC MPRMOCS MPRMRD MPBAT300 MPMAT4SV MPMATVEL MPFT-D MPFS MPRKRED MPGGF6 MPGGM1 MPEBP120 MPEB100 MPPINRM MPCLCAPRM

Full Suit #1 (with Shield) Full Suit #2 (with Shield) Full Suit #3 (with Shield) Full Suit #4 (with Shield) Full Suit #5 (with Shield)

SIZES

ENHANCED REDMAN SUIT

COLOURS

MPERMFS1 MPERMFS2 MPERMFS3 MPERMFS4 MPERMFS5

REDMAN XP SUIT

MODEL NO.

SIZES

Individual Suit Products and Accessories Can Be Purchased Separately

forensics supplies Forensics Supplies by FORENSICS SOURCE

Individual Test Kits Used to presumptively identify major drugs of abuse, these individual boxes of tests can be purchased as refills for existing kits, or for individual use.

Test O - GHB

Test U - Methamphetamine

For the presumptive identification of GHB (Gamma-Hydroxybutyrate). It is used after positive results from Tests A, G, I, W, J and R. A positive result is indicated by a green hue. 800-6090 Box of 5

For the presumptive identification of Methamphetamine and MDMA (Ecstacy). A positive result is obtained after a brown or violet result in Test A. Test A should always be used prior to Test U, as color results for Methamphetamine, Amphetamine and MDMA (Ecstacy) can be very similar. 800-6087 Box of 10

EVA-SAFE Syringe Collection Tubes Our EVA-SAFE syringe collection tubes meet OSHA requirements. Made of a clear, heavy 30 mil. plastic, international biohazard markings are printed in bright orange on the side. The tube measures 19.7cm (7 3/4") long by 2.5cm (1") in diameter. The end cap of the storage tube has flat sides on the caps to prevent it from rolling. 3-3872 EVA-SAFE Syringe Tubes, Pack of 12

Evi-Paq速 Standard ID Tents The standard version of our patented ID Tents includes a flat lower piece with an included metric scale, ideal for reference in scene photography. A hole at the tip of the base can be used to hang the scale from a vertical surface, and a hole through the center of the tent can be used to add additional visibility to the tent and anchor it to the ground with a crime scene flag. Standard ID Tents are available in both white and yellow, in your choice of numbers or letters. Standard Tent Type (indicate white or yellow when ordering) IDT-A26 A to Z IDT-0120 1 to 20 IDT-2140 21 to 40 IDT-4160 41 to 60 IDT-6180 61 to 80 IDT-8100 81 to 100 IDT-BLNK Blanks, Pack of 10

Flat Type (indicate white or yellow when ordering) IDFC-A26 A to Z IDFC-0120 1 to 20 IDF-D16 6 Arrows (3 north)

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

forensics supplies Forensics Supplies by FORENSICS SOURCE

Bootie Box™

The Fastest Method of Applying Shoe Covers Requiring all incoming personnel to wear a protective shoe cover won’t be an issue when using the Bootie Box. Simply place one at the entrance to the crime scene, clean room or laboratory. Individuals entering the area simply press their foot into the Bootie Box. Without any other action required, a shoe cover is automatically placed on the foot. The Bootie Box is ideal for individuals entering an area requiring footwear protection with their hands full of equipment or supplies. The Bootie Box’s ease of use makes it simple for individuals to take the necessary safety precautions regarding their footwear. The Bootie Box doesn’t require electricity or batteries, is easily transportable and carries up to 30 shoe covers at a time! • Easy to use - No hands required! • Does not require electricity or batteries • Quickly dispenses shoe covers • Inexpensive to use • Keeps dirt and contaminants to a minimum Specifications: Maximum capacity: 30 shoe covers (15 pairs) Dimensions: 20.6cm x 26.4cm x 14cm (18.125" x 10.375" x 5.5") Opening Dimensions: 33cm x 14cm (13" x 5.5") Weight: 2.27kg (5 lbs.) 3-5450 3-5451

Bootie Box Bootie Box Refills, Pack of 30 Step 1 Step 2 Step3

Inch L-Shaped Scale Similar in shape to the ABFO No. 2 scale above, this scale is printed with inch markings instead of metric. It is made from the same heavy, laminated plastic and has the same non-glare finish. Circles with crosshairs are printed on each corner to assist in correcting parallax. There are alternating black and white bars to allow for measurements of grossly overor under-exposed photographs, and there are bars of approximate 18% gray scale for color corrections. 6-3886 Inch L-Shaped Scale

Hinged L-Reference Scale This unique, two-sided metric scale can be folded for easy storage or used as a straight scale. The short arm of the scale can be adjusted to any angle, providing versatility. The two-tone color scheme provides maximum contrast for any photographic situation. One face is white with black markings. The reverse is black with white markings. Alternating black and white bands provide contrast at a distance. Neutral gray bars assist in color correction and crosshairs at each end provide photogrammetry corrections. R-0029 Hinged L-Reference Scale

EVI-PAQ® WINDOW BOXES

Unique Evidence Boxes with a View Window boxes feature rigid polystyrene windows that allow you view evidence, record serial numbers and other information without sacrificing the integrity, strength and durability you’ve come to expect from Evivi-Paqaq® evidence boxes. Windowed Rifle Boxes Large enough to fit a standard rifle, these boxes measure 123.1cm x 17.8cm x 5.1cm (48.5" x 7" x 2"). Windowed Gun Boxes Designed to fit the majority of handguns, each box measures 34.3cm x 20.3cm x 5.1cm (13.5" x 8" x 2"). WRF-BOX Windowed Rifle Box, Bundle of 20 WGN-BOX Windowed Handgun Box, Bundle of 20

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

forensics supplies Forensics Supplies by FORENSICS SOURCE

Amido Black

Aqueous Amido Black

Amido Black is a powdered protein dye, sensitive to the properties in blood. It can be used to enhance or develop blood-contaminated latent prints. Bloody latent prints, even those not visible, may be developed on porous and nonporous surfaces, such as cadavers, wood or paper. Amido Black is mixed with glacial acetic acid and methanol, or you can purchase our pre-mixed Aqueous Amido Black (at right). 1-0046 Amido Black, 25g (0.9oz.)

This pre-mixed amido black solution can be used to enhance or develop bloodcontaminated latent prints. Since this solution is aqueous (mixed with water), it is safer to use and does not require pre-soaking the various objects in methanol like a standard Amido Black solution requires. Aqueous Amido Black has a one-year shelf-life when kept out of extreme high or low temperatures. Do not refrigerate. 1-2740 Aqueous Amido Black, 1 liter (0.3gal.) 1-2741 Aqueous Amido Black, 3.8 liter (1 gal.)

Handi-Liftsâ&#x201E;˘ Handi-Lifts combine lifting tape and backing card into one convenient card. Simply lift the pre-cut section of tape and peel off the adhesive backer. Lift the latent prints as you would normally, then simply press the two halves together. Case and date can be written along the paper hinge. Handi-Lifts come in three sizes and colors, for any size of print and color of powder you may use. Transparent Handi-Lifts 1-2055 Transparent Handi-Lifts, 1 1/2" x 2" 24 pk. 1-2058 Transparent Handi-Lifts, 2" x 4" 12 pk. 1-2061 Transparent Handi-Lifts, 4" x 4" 12 pk. White Handi-Lifts 1-2056 White Handi-Lifts, 1 1/2" x 2" 24 pk. 1-2059 White Handi-Lifts, 2" x 4" 12 pk. 1-2062 White Handi-Lifts, 4" x 4" 12 pk. Black Handi-Lifts 1-2057 Black Handi-Lifts, 1 1/2" x 2" 24 pk. 1-2060 Black Handi-Lifts, 2" x 4" 12 pk. 1-2063 Black Handi-Lifts, 4" x 4" 12 pk. Assorted Handi-Lifts 1-2067 Assorted Sizes and Colors

M-H Classification Magnifier This German-crafted magnifier has the finest optics and the most distortion-free flat-field lenses available to the police market today. An independent study by the Science & Practices Committee of the California State Division of the International Association of Identification rated this magnifier the best overall of seven top models tested. It rated the highest in center sharpness, overall sharpness, brightness, contrast, color correction, magnification and ease of handling. The view is crystal clear and in sharp focus across the entire field. Providing generous 4.5x magnification and with a wide 5.4cm (2 1/8") diameter opening at the base, this magnifier is simply the best classification magnifier available for fingerprint examination and classification. A number of different reticles (coding discs) are available and fit snugly into the round opening of the magnifier. 5-1000 M-H Classification Magnifier 5-1001 Henry Disc (one line) 5-1002 Battley Disc (concentric circles) 5-1003 Henry-Battley Disc (line w/half rings) 5-1004 Crosshair Disc (two crossing lines)

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs by TUFF-TIE DISPOSABLE HANDCUFFS

•

Each TUFF-TIE® is 100% tested at time of manufacture and before shipping. No TUFF-TIE® has ever been known to fail when used according to instructions.

•

TUFF-TIES® make transporting prisoners easier, simpler and safer. TUFFTIES® don't have to be removed for metal detection devices or during transport to other jurisdictions.

•

TUFF-TIES® are non-injurious to the skin. Soft and flexible, with no sharp edges, they conform tightly to the contours of the wrist without cutting or abrading the skin and thereby minimizing the risk of exposure to blood.

•

TUFF-TIES® are easy to carry, easy to conceal. The assembled weight of one original TUFF-TIE® is only 8 grams and is compact enough to fit in a pocket. Three sets can be rolled up to fit in the cavity of a pair of handcuffs, providing the availability of four restraints when needed.

•

TUFF-TIES® are quick and easy to apply with the added safety of a double locking feature.

TUFF-TIE® HOBBLE

•

TUFF-TIE® flat diamond-braided nylon is twice as strong as plastic electrical cable ties. The polymeric block is virtually indestructible. Both block and braid are unaffected by heat, cold or humidity. The product has an unlimited shelf/storage life and is nontoxic.

•

TUFF-TIES® are available in the original size with a 12" loop circumference on each side. TUFF-TIE® JR. is designed for use in less than life-threatening situations. The Foot Restraint has the same strength and features as the original TUFF-TIE® but has longer end cord, and is best suited for the more dangerous offender. The TUFF-TIE® Hobble, infinitely adjustable to any stride, is designed for transport and courtroom purposes.

•

The "TUFF-CUTTER" Tool makes removal quick, easy and safe. Because of its construction, it cannot be used as a weapon, and it precludes the need to carry pliers, knives or scissors. It doubles as a useful tool in rescue operations, being able to easily cut through items such as seat belts, safety harnesses, etc.

TUFF-TIE® FOOT RESTRAINT

"TUFF-TIE"

"TUFF CUTTER"

Restraints by MDC CHARLTON CUSTOM NYLON CNW HOBBLE RESTRAINT

• • • •

50” long Nylon poly web construction Strong metal clips & buckle system Compact size

CNWHOBBLE CNWHOBBLE-11

Hobble strap Hobble in carry pouch

NYLON TRANSPORT BELT Maintains a handcuffed person's wrists at their waist. 56" long and 2" wide. D-ring made to our specifications to fit virtually all handcuffs. Handcuffs not included #AHUNT-48

Restraints by GOULD & GOODRICH 189 RESTRAINT BELT

• • •

Heavy weight Features heavy duty roller buckle and “D” ring D ring accepts most chain and hinged handcuffs and restraining chains Russet leather color only

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

D RING

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs & Restraints by HUMANE RESTRAINT LEATHER CUFF RESTRAINTS

Standard Wrist Standard Wrist Standard Ankle Standard Ankle Standard XLarge Ankle Standard XLarge Ankle Foam Padded Wrist Foam Padded Wrist Foam Padded Ankle Foam Padded Ankle Foam Padded XLarge Ankle Foam Padded XLarge Ankle

LEATHER RESTRAINTS 201/202 Restricts motion of the limbs of a restrained person. Available in either standard or foam padded for wrist, ankle and large ankle. Wristlets are 12" long and 3" wide, anklets are 14" long and 3" wide, and extra large anklets are 17" long and 3" wide. Disposable fleece liners are also available.

LOCKING LEATHER RESTRAINTS Provides additional security by maintaining a restrained person's limb. The lock promotes authorized release. The restraint can also be left on the limb without a belt to allow for movement of the limb. Available in either standard or foam padded for wrist or ankle. Disposable fleece liners are also available.

RESTRAINT JACKETS HUMANE JACKET Restrains a person's arms while still allowing them to walk Small Medium Large XLarge

401 Wrist cuffs are 13" long and 2 3/4" wide, with eight size adjustments ranging from 7 1/2" to 11 1/2" . Ankle cuffs are 15" long and 2 3/4" wide., with eight size adjustments ranging from 9" to 14". Standard Wrist Standard Ankle Foam Padded Wrist Foam Padded Ankle

AHUCSJR-10S (-CS with crotch snap) AHUCSJR-10M (-CS with crotch snap) AHUCSJR-10L (-CS with crotch snap) AHUCSJR-10XL (-CS with crotch snap)

BED RESTRAINTS

301

AHUWA-202 AHUWJ-201 AHUAA-202 AHUAJ-201 AHUAA-202XL AHUAJ-201XL AHUWAL-202 AHUWJL-201 AHUAAL-202 AHUAJL-201 AHUAAL-202XL AHUAJL-201XL

LOCKING LEATHER RESTRAINTS

Wrist cuffs are 12" long and 2 1/2" wide, with eight size adjustments ranging from 6" to 9 3/4" . Ankle cuffs are 15" long and 2 1/2" wide, with eight size adjustments ranging from 8" to 13 1/4".

Standard Wrist Standard Ankle Foam Padded Wrist Foam Padded Ankle

AHUWA-301 AHUAA-301 AHUWAL-301 AHUAAL-301

AHUW-401 AHUA-401 AHUWL-401 AHUAL-401

LOCKING LEATHER BED RESTRAINTS 202/203

to NON LOCKING BED Wrist AHUCBWL-202 Ankle AHUCBAL-202 to LOCKING BED Wrist AHUCBLWL-203 Ankle AHUCBLAL-203

Centre webbing is 38" long and 4" wide. The leather straps are 32" long and 1 1/4" wide with twelve size adjustments ranging from 6" to 9 3/4". Ankle cuffs are 15" long and 2 1/2" wide with eight size adjustments ranging from 8" to 13 1/4". Custom sizing available upon request.

Handcuffs & Restraints by SAFE RESTRAINTS THE WRAP The WRAP, manufactured by Safe Restraints, Inc., was designed as a temporary restraining device, and provides a safe and quick method of controlling and immobilizing a violent or potentially violent/combative subject who has been taken into custody. Used properly it can increase officer safety and reduce risk of liability due to injuries and in-custody deaths. The WRAP immobilizes the body and restricts a subject’s ability to kick or do harm to oneself and others. The WRAP minimizes the time required to secure a person safely, restrains the subject in an upright position, and has the subject prepared for transport or movement. The WRAP can be used prior to or after a violent or potentially violent/combative subject is controlled using approved departmental methods. The WRAP should be considered for use under the following situations:

• • • • • • • •

Whenever you anticipate possible violent/combative behavior. To immobilize a violent/combative subject. To limit violent/combative subjects from causing injury to themselves or others. To prevent violent/combative subjects from causing property damage by kicking. To restrain subjects after a chemical spray or stunning device is used. When conventional methods of restraint are not effective. In transportation of violent/combative subjects. To assist with cell extraction of violent/combative subjects.

Head Office: 1-866-652-2877

West: (604) 526-1631

SRW-100

Prairies: 1-866-652-2877

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs & Restraints by AEDEC PROSTRAINT VIOLENT PRISONER CHAIR

GREAT FLEXIBILITY Merely lift off the PRO-STRAINT® chair and place the carriage in a closet or replace it with another chair. This adds great flexibility and allows a department to have 3 or more carts per one carriage.

RC 1300

RC1200 DLX

THE RC 1300 SOLUTION At last, a way to exercise the prisoner (or medicate) without the prisoner leaving the restraining chair. They can feed themselves while under full control of the monitoring officer. An ergonomic "pocket" for each leg provides greater control without sacrificing the overall circulation. Well suited for the very violent, mental and substance influenced prisoner, offering maximum control and safety.

WHY TEAR UP YOUR SAFETY CELL? Save costly repairs on your safety cell. It is much safer for the prisoner and much less labor intensive for your personnel. It sits flat on the floor for great stability. Two officers can easily load the prisoner into the chair in less than a minute and the prisoner is there to stay! There is nothing for him to hit his head on -- and with all the restraints administered it is virtually impossible for the prisoner to tip the chair over. The prisoner sits comfortably but well secured.

• • • • •

RC1400

New Quick Release Leg Restraints New Quick Release Wrist Restraints Facilitates Exercise of Limbs While Restrained Larger Leg and Arm Restraints More Control for the Officer

RC 1400...GREATER STABILITY, LOWER CENTER OF GRAVITY

• • •

PRO-STRAINT® REPLACEMENT PARTS:

Lifts 750-1000lb. Effortlessly Lifting Mechanism Completely Foot Operated Chair Turns 360°

RC1350 LEG RESTRAINT UPGRADE

RC 06 - Buckle Wand, Restraining Chair Only

RC 07 - Buckle Wand, Vehicle Only RC 16 - Retainer Cover

RC 18 - Waist Restraint

RC38 - D Ring Handle Half of Waist Belt

Head Office: 1-866-652-2877

PD 40 - Front Leg Restraint Pad/Belt RC 12 - Leg Restraint

RC 26 - NEW Leg Restraints

RC06 - Sonically Welded Buckle Wands

West: (604) 526-1631

PD 10 - Back Support Pad

RC 26 - NEW Soft Restraints

RC 10 - Retractor Assembly

PD 30 - Rear Restraint Pad

RC 28 - Restraining Chair Seat (shown with complete chair)

Prairies: 1-866-652-2877

RC 1300 - NEW Wrist Restraint w/Shackle Mount

East: 1-877-993-9968

RC 28 - Restraining Chair Seat (shown with complete chair)

RC 14 - Wrist Restraint

HANDCUFFS & RESTRAINTS Restraints by RESTRAINT SYSTEM TECHNOLOGIES INC THE GRIP LOCKING WAIST BELT / HOBLE

RST-INST-DVD Instructional video on DVD

RST-WBH-1 58 1/2" strap with locking buckle. Secure ankles together to eliminate damage to squad car interiors. Restricted, but controlled, walking waist to ankle hobble.

RST-WBH-DR-1 A traditional transport belt with 2" D-ring in front for typical handcuffing. Lighter than leather and more easily sanitized.

RST-KEY Replacement handcuff key

THESE 2 ITEMS INCLUDED WITH EACH SYSTEM

WRIST RESTRAINT

Ankle

RST-WR-1 Eliminates metal-to-skin injuries caused by traditional metal handcuffs. Double Locking is eliminated by a simple and secure one-step closure process. Uses a standard handcuff key

RST-WR-DR-1 Custom D-ring option can be placed at customer specified position on this system.

Wrist

RST-APST-1 (optional) 2 wrist and 2 ankle padded wraps. The set affords additional comfort and safety during long haul transports and extended periods of restraint.

RST-BUMP Replacement rubber bumpers to prevent metal to skin contact.

ANKLE RESTRAINT

Ankle

RST-AR-1 Designed for an easy unassisted step-up onto prisoner transportation vans and buses. Noiseless and more humane than leg irons.

RST-WR-DR-1 Custom D-ring option can be placed at customer specified position on this system.

Wrist

RST-APST-1 (optional) 2 wrist and 2 ankle padded wraps. The set affords additional comfort and safety during long haul transports and extended periods of restraint.

Head Office: 1-866-652-2877

RST-BUMP Replacement rubber bumpers to prevent metal to skin contact.

West: (604) 526-1631

Prairies: 1-866-652-2877

RST-LOOP Replacement elastic loops to retain the loose ends of the belts.

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Restraints by RESTRAINT SYSTEM TECHNOLOGIES INC THE GRIP

WAIST BELT WITH FIXED WRIST RESTRAINTS

Ankle

RST-WB/FWR-1 A variation of the "moveable "wrist restraint system in that a prisoner's wrists are secured at a "fixed" position on the waist belt for short haul transports.

RST-WR-DR-1 Custom D-ring option can be placed at customer specified position on this system.

Wrist

RST-APST-1 (optional) 2 wrist and 2 ankle padded wraps. The set affords additional comfort and safety during long haul transports and extended periods of restraint.

RST-BUMP Replacement rubber bumpers to prevent metal to skin contact.

WAIST BELT WITH MOVEABLE WRIST RESTRAINTS

Ankle

RST-WB/RWR-1 Allows a prisoner's wrists to be repositioned on the waist belt without having to unsecure the prisoner's hands.

RST-WR-DR-1 Custom D-ring option can be placed at customer specified position on this system.

Wrist

RST-APST-1 (optional) 2 wrist and 2 ankle padded wraps. The set affords additional comfort and safety during long haul transports and extended periods of restraint.

RST-BUMP Replacement rubber bumpers to prevent metal to skin contact.

WAIST BELT WITH EXTENDABLE WRIST RESTRAINTS

Ankle

Wrist

RST-APST-1 Allows restricted mobility while the inmate or patient is still restrained. The arms can be extended or retracted back to the hip position as well as any discretionary position in between.

RST-APST-1 (optional) 2 wrist and 2 ankle padded wraps. The set affords additional comfort and safety during long haul transports and extended periods of restraint.

Head Office: 1-866-652-2877

Prairies: 1-866-652-2877

West: (604) 526-1631

RST-BUMP Replacement rubber bumpers to prevent metal to skin contact.

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Restraints by RESTRAINT SYSTEM TECHNOLOGIES INC THE GRIP FIXED TRANSPORT SET

Ankle

RST-WB/FWR-1 A variation of the "moveable "wrist restraint system in that a prisoner's wrists are secured at a "fixed" position on the waist belt for short haul transports.

RST-FTS The complete system with all components.

RST-WR-DR-1 Custom D-ring option can be placed at customer specified position on this system.

Wrist

RST-APST-1 (optional) 2 wrist and 2 ankle padded wraps. The set affords additional comfort and safety during long haul transports and extended periods of restraint.

RST-AR-1 Designed for an easy unassisted step-up onto prisoner transportation vans and buses. Noiseless and more humane than leg irons.

RST-BUMP Replacement rubber bumpers to prevent metal to skin contact.

RST-LOOP Replacement elastic loops to retain the loose ends of the belts.

RST-AR-DR-1 Custom D-ring option can be placed at customer specified position on this system.

TRANSPORT SET

Ankle

RST-TS The complete system with all components

RST-WB/RWR-1 Allows a prisoner's wrists to be repositioned on the waist belt without having to unsecure the prisoner's hands.

RST-WR-DR-1 Custom D-ring option can be placed at customer specified position on this system.

RST-AR-1 Designed for an easy unassisted step-up onto prisoner transportation vans and buses. Noiseless and more humane than leg irons.

Wrist

RST-APST-1 (optional) 2 wrist and 2 ankle padded wraps. The set affords additional comfort and safety during long haul transports and extended periods of restraint.

RST-BUMP Replacement rubber bumpers to prevent metal to skin contact.

RST-LOOP Replacement elastic loops to retain the loose ends of the belts.

RST-AR-DR-1 Custom D-ring option can be placed at customer specified position on this system.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs by HIATT HANDCUFFS

18 teeth — 3 retaining bars with 6 teeth on each bar make Hiatt cuffs extremely difficult to pick

Heavy duty construction with domed rivet heads for added strength

Built in backloading feature for faster cuffing

True swing technology ensures the shackle hits the center of the cuff every time

Leaf spring double locking system that is very difficult to defeat

COLOR-CODED RESTRAINTS Made with a durable premium finish, Hiatt’s line of colorcoded standard chain style handcuffs can be used to classify threat levels, ages, agency, medical conditions and other factors as needed.

Three standard high visibility colors RED, ORANGE and YELLOW Four special order colors BLUE, PURPLE, GREEN and PINK

CHAIN STYLE COLOR-CODED Model 2010c All the features of a standard Hiatt handcuff with the added ability to color-code subjects. Choose from pink, purple, green, blue, red, yellow and orange.

SPECIALTY HINGED HANDCUFFS

RIGID HANDCUFF (non-folding) Nickel Plate Model 2103 The Rigid Hinged handcuff provides a firm, comfortable grip that molds to the shape of your hand for added control and ease of application. Can be used with leather holder model SCP5.

Whether you are transporting inmates between institutions, to a court date or just need a higher level of security, Hiatt offers a line of specialty hinged handcuffs that are unparalleled in strength, quality, control and security.

ULTIMATE HINGED HANDCUFF Nickel Plate Model Ul-1 Black Penetrate Model Ul-5 The Ultimate Hinged handcuff combines strength and convenience. It snaps rigid when drawn then folds and locks closed with the handcuff key for convenient storage. Can be used with leather holder model 9070.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

MAXIMUM SECURITY HANDCUFF Nickel Plate Model hss9 For situations that require the utmost in security. This model features a pick resistant 7-pin tumbler double locking system that overrides the standard handcuff key hole when it is engaged. Swivel features 25 locking positions. Can be used with nylon holder model NCH1.

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs by HIATT HINGE STYLE HANDCUFFS

Slip your hands around the grip of the hinged handcuffs and feel the control. In addition to all the features that come standard with Hiatt Handcuffs, the hinged models are made using three solid links to connect the cuffs as opposed to the roller chain used on chain style cuffs. The hinged models provide greater subject control and feel more comfortable in your hand.

LIGHTWEIGHT STELOY Nickel Plate Model 3154 Black Finish Model 3155 40% lighter and 17% larger. Made from a combination of steel and aluminum, known as Steloy, the lightweight model offers maximum strength without the extra weight. Available in nickel and black.

BIG GUYS Nickel Plate Model 2054 Black Finish Model 2055 17% larger than the standard model. Big Guys cuffs are ideal for restraining larger subjects who have trouble placing their hands behind their back. Available in nickel and black. Can be used with nylon holder model NCH-9. t

STANDARD HINGE STYLE Nickel Plate Model 2050 Black Finish Model 2075 Crafted from high quality steel, the hinge style cuffs feature heavy duty, solid hinges for reinforced holding power. Available in nickel and black.

CHAIN STYLE HANDCUFFS Hiattâ&#x20AC;&#x2122;s line of chain style handcuffs set the standard for strength and reliability. Crafted from heavy duty high carbon steel, they have reinforced steel swivels that make them a rugged tool for criminal justice professionals. Like all Hiatt Handcuffs, they feature

100

an 18-tooth, 3-retaining bar system paired with a positive swing-through action, built in back-loading feature for fast cuffing, heavy duty construction with oversized rivet heads for added strength, and side double locks.

STANDARD CHAIN STYLE Nickel Plate Model 2010 Black Finish Model 2015 Made from top quality steel, the chain style model features reinforced steel swivels for added strength and durability. Available in nickel and black. Also available in a variety of colors.

LIGHTWEIGHT STELOY Nickel Plate Model 3103 Black Finish Model 3105 40% lighter and 17% larger. Made from a combination of steel and aluminum, known as Steloy, the lightweight model offers maximum strength without the extra weight. Available in nickel and black.

BIG GUYS Nickel Plate Model 2003 Black Finish Model 2005 17% larger than the standard model. Big Guys cuffs are ideal for restraining larger subjects who have trouble placing their hands behind their back. Available in nickel and black. Can be used with nylon holder model NCH-9.

BIG BRUTUS Nickel Plate Model 9010 25% larger than standard handcuffs. The largest handcuff model offered by Hiatt, they can be used on the wrists of larger subjects or the ankles of any subjects. Available in nickel.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuff Accessories by CUFF CLEANER MODEL 510 DISINFECTING STATION

NO MUSS. NO FUSS. CLEAN CUFFS. The Cuff Cleaner System offers an unequalled method for effectively and efficiently disinfecting handcuffs and other restraint devices. By adopting Cuff Cleaner, your agency will be at the forefront in promoting Officer Safety and Public Protection, along with satisfying Occupational Health and Safety requirements. KIT INCLUDES: Model 510 station, cleaner, pump, air, lubricant, and towel.

Disinfecting Station Model 510

Cuff Clinic Model 1510

Cuff Cleaner Air (case = 12 - 8 oz cans)

Cuff Clinic Model 2510

Cuff Cleaner Restraint Lubricant

Cuff Cleaner Plus (case = 4 - 4L bottles)

(case = 9 - 4 oz cans)

Cuff Clinic Model 5510

Cuff Clinic Model 3510

Cuff Cleaner Towels

Cuff Clinic Model 8510

Beautiful in its simplicity, deadly in its purpose

Top up the disinfectant solution

Head Office: 1-866-652-2877

Place the contaminated cuffs in the basket

West: (604) 526-1631

Lower the basket into the bath

Prairies: 1-866-652-2877

Set the timer for 10 minutes minimum

East: 1-877-993-9968

Remove the basket and disinfected cuffs

Tap water rinse, towel dry, lubricate and the cuffs are ready to go

101

HANDCUFFS & RESTRAINTS Handcuffs & Restraints by SMITH & WESSON HANDCUFFS

MODEL 100 CHAIN-LINKED HANDCUFFS - BLUE

MODEL 110 SPECIAL SECURITY CHAIN-LINKED NICKEL HANDCUFF

350101 Our most popular handcuff. Smith & Wesson Handcuffs are fabricated from the finest quality carbon steel. They are manufactured with heat treated internal lockworks, featuring smooth ratchets for swift cuffing and double locks to prevent tampering. All S&W handcuffs meet or exceed demanding U.S. National Institute of Justice tests for workmanship, strength, corrosion and tamper resistance.

350118 This special security handcuff, in a nickel finish, features a larger dimension chain and swivel for special security situations. Smith & Wesson Handcuffs are fabricated from the finest quality carbon steel. They are manufactured with heat treated internal lockworks, featuring smooth ratchets for swift cuffing and double locks to prevent tampering. All S&W handcuffs meet or exceed demanding U.S. National Institute of Justice tests for workmanship, strength, corrosion and tamper resistance.

MODEL 100 CHAIN-LINKED HANDCUFFS - NICKEL 350103 Our most popular handcuff. Smith & Wesson handcuffs are fabricated from the finest quality carbon steel. They are manufactured with heat treated internal lockworks, featuring smooth ratchets for swift cuffing and double locks to prevent tampering. All S&W handcuffs meet or exceed demanding U. S. National Institute of Justice tests for workmanship, strength, corrosion and tamper resistance. Standard Size Nickel.

MODEL 1850 NICKEL TRANSPORT RESTRAINT CHAINS

MODEL 100P CHAIN-LINKED HANDCUFFS W/PUSH PIN DOUBLE LOCKING SYSTEM

MODEL 300 HINGED BLUE HANDCUFF

350139 This Transport Restraint System uses a combination of our Model 1 Universal Handcuff and Model 1900 Leg Irons both in satin nickel finish. The chain length between cuffs is 32””. Smith & Wesson Handcuffs are fabricated from the finest quality carbon steel. They are manufactured with heat treated internal lockworks, featuring smooth ratchets for swift cuffing and double locks to prevent tampering. All S&W handcuffs meet or exceed demanding U.S. National Institute of Justice tests for workmanship, strength, corrosion and tamper resistance.

350135 Our most popular handcuff with our push pin double locking system in a satin nickel finish. Smith & Wesson Handcuffs are fabricated from the finest quality carbon steel. They are manufactured with heat treated internal lockworks, featuring smooth ratchets for swift cuffing and double locks to prevent tampering. All S&W handcuffs meet or exceed demanding U.S. National Institute of Justice tests for workmanship, strength, corrosion and tamper resistance.

350095 Hinged design to further restrict movement. Has double lock slot configuration for increased security. Smith & Wesson Handcuffs are fabricated from the finest quality carbon or stainless steel. They are manufactured with heat treated internal lockworks, featuring smooth ratchets for swift cuffing and double locks to prevent tampering. All S&W handcuffs meet or exceed demanding U.S. National Institute of Justice tests for workmanship, strength, corrosion and tamper resistance.

Handcuff Keys by ZAK TOOLS Zak handcuff keys are of a standardized design and are compatible with all standard series handcuffs. They are made from heat treated stainless steel to provide an indefinite

#AZA-ZT8

#AZA-ZT14

102

period of service. Because of the high grade material and craftsmanship employed, it is possible and practical to offer them with an unlimited lifetime guarantee.

#AZA-ZT55

#AZA-ZT11

#AZA-ZT21

#AZA-ZT9

Head Office: 1-866-652-2877

#AZA-ZT57

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

HANDCUFFS & RESTRAINTS Handcuffs by PEERLESS HANDCUFFS

CHAIN LINK HANDCUFF MODEL P010 - NICKEL FINISH

CHAIN LINK HANDCUFF MODEL 700 - NICKEL FINISH

CHAIN LINK HANDCUFF MODEL 700 - PENTRATE FINISH

The P010 is intended to fit increasingly tight budgets without compromising quality and safety. Designed and tested to meet the tough demands often placed on this critical piece of equipment the P010 is manufactured in Korea at an ISO/TS 16949 and ISO 14001 certified facility using high quality materials and component parts. The P010 has been tested and approved by the National Institute of Justice as meeting the current US government standards for metallic handcuffs. Our newest model is standard sized, double locking, with two keys supplied. It comes with a lifetime warranty for manufacture defects.

The Peerless® chain link handcuff has a new design! The Model 700 now incorporates spun rivet construction for increased strength and durability. Smooth single strand action allows for fast and efficient cuffing. The profiled edges minimize the risk of tissue and nerve injury. The Model 700 has been approved by the National Institute of Justice. It comes with a lifetime warranty for manufacture defects. Two keys supplied.

Weight: 10 oz. Material/Finish: Carbon Steel/Nickel Minimum opening: 51 mm/2 inches Minimum inside perimeter: 150 mm/5.9 inches Maximum inside perimeter: 211 mm/8.3 inches Maximum overall length: 236 mm/9.3 inches

Weight: 10 oz Material/Finish: Carbon Steel/Pentrate Minimum opening: 51 mm/2 inches Minimum inside perimeter: 211 mm/8.3 inches Maximum inside perimeter: 150 mm/5.9 inches Maximum overall length: 236 mm/9.3 inches

Weight: 10 oz. / 283 gms Material/Finish: Carbon Steel Minimum opening: 2.0 in / 51 mm Minimum inside perimeter: 5.9 in. / 150 mm Maximum inside perimeter: 8.3 in / 211 mm Maximum overall length: 9.3 in / 236 mm

CUFFCLIP ™ - MULTIPLE RESTRAINT CARRIER Our newest product is now in stock. CUFFCLIP ™ is designed to take away the hassle of carrying multiple sets of handcuffs. CUFFCLIP ™ is a convenient, efficient and safe way to carry as many as 12 pairs of handcuffs. Invented by a law enforcement veteran, the patented CUFFCLIP ™ is designed to be worn with a standard size 2.25 in duty belt and consists of a heavy duty stainless steel main spring welded to a pair of belt loops. Handcuffs are easily carried and can be quickly and efficiently be accessed with one hand. It allows an officer to keep one hand free and removes the chance of a prisoner to gain access to unrestrained handcuffs. Weight: 10 oz. Material/Finish: Stainless Steel Maximum overall length: 5.5 Inches

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

OVERSIZE HANDCUFF KEY A high quality extra large key designed to make double locking and unlocking restraints faster and easier. The extra long aluminum barrel is oversized and knurled for lighter weight and easy handling. The flag tip and double lock pin are made from heat treated alloy steel for high strength and durability. The key ring is on a swivel for easy turning. Compatible with all standard type handcuff locking mechanism. Available in silver or black finish. Weight: 7 oz. Material/Finish: Aluminum / Alloy Steel

103

HANDCUFFS & RESTRAINTS Handcuffs by PEERLESS HINGE STYLE HANDCUFFS

HINGED HANDCUFF MODEL 801 - PENTRATE FINISH

HINGED HANDCUFF MODEL 801 - NICKEL FINISH

The Peerless® Model 801 provides additional restraint by more effectively restricting hand and arm movements. The Model 801 features all steel construction, spun rivets, machined edges and smooth single strand action. The Model 801 has the ability to fold flat for compact storage. It has a 10% larger inside perimeter then the Model 700. The Model 801 has been approved by the National Institute of Justice. Lifetime warranty for manufacturing defects and two keys supplied.

Weight: 12oz. Material/Finish: Carbon Steel/Pentrate Minimum opening: 56 mm/2.2 inches Minimum inside perimeter: 163 mm/6.4 inches Maximum inside perimeter: 231 mm/9.1 inches Maximum overall length: 216 mm/8.5 inches

Weight: 12oz. Material/Finish: Carbon Steel/Nickel Minimum opening: 56 mm/2.2 inches Minimum inside perimeter: 163 mm/6.4 inches Maximum inside perimeter: 231 mm/9.1 inches Maximum overall length: 216 mm/8.5 inches

HIGH SECURITY CHAIN LINK HANDCUFF MODEL 710 The Model 710 is designed for high risk prisoner restraint and transport situations. The Model 710 does not operate with a standard handcuff key. The Model 710 incorporates Model 700 Chain Link Handcuff with a MEDECO® or ASSA® Desmo high security lock system and Lexan® polycarbonate housing. MEDECO® and ASSA® Desmo are recognized leaders in pick resistance lock systems. Multiple sets can be ordered with two different key options. Each set can be keyed alike or each set can be keyed different. Both MEDECO® and ASSA® Desmo use restricted key control systems to prevent unauthorized key duplication. The Lexan® polycarbonate housing is nearly unbreakable and is color coded orange for high visibility. Other features include spun rivet construction, double lock capability, and profiled edges to reduce risk of tissue and nerve injuries. All products come with two keys, a double lock activator, and a lifetime warranty for manufacture defects. Weight: 14 oz. Material/Finish: Carbon Steel and Lexan® Minimum opening: 2.0 in / 51 mm Minimum inside perimeter: 5.9 in / 150 mm Maximum inside perimeter: 8.3 in / 211 mm Maximum overall length: 9.3 in / 236 mm

WAIST CHAIN WITH HANDCUFFS MODEL 7002 - NICKEL FINISH

WAIST CHAIN WITH HANDCUFFS MODEL 7003 - NICKEL FINISH

The Model 7002 Waist Chain is designed for special security situations. The Model 7002 has one Model 700 handcuff positioned at each hip allowing for either parallel arm or cross arm handcuffing technique. The special heat treated steel chain and padlock rings assure adjustment up to 54 in. waist. Lifetime warranty for manufacture defects and two keys supplied.

The Model 7003 Waist Chain is designed for high security transportation, courtroom and processing situations. The Model 7003 Waist Chain has a set of Model 700 Chain Link Handcuffs positioned at the navel allowing for limited use of the hands. The special heat treated steel chain and padlock rings assure adjustment up to 54 in. waist. Lifetime warranty for manufacture defects and two keys supplied.

Weight: 29 oz. Material/Finish: Carbon Steel/Nickel Minimum opening: 51 mm/2 inches Minimum inside perimeter: 150 mm/5.9 inches Maximum inside perimeter: 211 mm/8.3 inches Maximum overall length: 236 mm/60 inches

104

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical & riot Equipment Instructor Certification Courses by DEF. TEC. CORPORATION aEROSOL pROJECTOR, cHEMICAL mUNITIONS, dISTRACTION dEVICES

Defense Technology Corporation of America A Subsidiary of Armor Holdings Inc.

M.D. CHARLTON CO. LTD. is a Canadian Distributor for DEFENSE TECHNOLOGY CORP. of AMERICA. Please call for further information on regularly scheduled courses on the use of Chemical Agents and First Defense® line of Aerosol Incapacitation Products.

• • • • •

Less-Than-Lethal Munitions Chemical Munitions OC Aerosol Pepper Projectors Diversionary Devices Training Courses

Instructor Certification Courses AEROSOL PROJECTOr instructor Certification Program Designed to prepare those officers responsible for the training and carrying of FIRST DEFENSE®. In addition, it is aimed at legally qualifying them, by the manufacturer, as an "expert witness" in court cases regarding their use. Instruction includes the mechanical operation of all types of aerosols and delivery systems as well as practical application for effective accuracy.

CHEMICAL MUNITIONs Instructor Certification Program This comprehensive two-day program is designed to certify the experienced officer or training officers in the instruction of the use of chemical agents. This course is aimed primarily at law enforcement and correctional personnel who will be required to return to their respective departments and instruct on the subject of chemical munitions. Course Outline: Development of Policies and Procedures for Use; Types and Forms of Chemical Agents; Use of FIRST DEFENSE®; Protective Masks

- Types and Nomenclatures; Determining Incapacitating and Lethal Doses; Criminal and Civil Liabilities; Use of 37mm Gas Gun and Gas Pistol; Live Fire Exercises on all Weapons and Launchers.

DISTRACTION DEVICe Instructor Certification Program This two-day program is recognized as one of the finest of its kind. It is designed to certify experienced tactical officers in the safe deployment and training of the No.25 DISTRACTION DEVICE. Instruction includes the mechanical operations of diversionary devices currently available to law enforcement, corrections and military personnel. Attending officers become proficient in the handling, arming, disarming and training of the device. Course Outline: Introduction to Explosives; Types and Nomenclatures of Diversionary Devices; Overpressure - Cause and Effect; Anderson Blasage; Decibels/Candela P.S.I.; Criminal and Civil Liabilities; Handling/Storage/ Rendering Safe.

"With the accuracy of many of the impact munitions improving, officers are expected to be more accurate than in the past. Free-flying rounds have been a contributing factor to some injuries in the past, which was accepted by law enforcement. Munitions today, however, are becoming extemely accurate and we no longer have to endure the knuckle-ball effect. There are many factors during an incident that cannot be controlled, but accuracy of the round (through proper test and evaluation) and the abilities (decision-making, target acquisition) Don Kester of the officer are controllable and should be emphasized." "LESS LETHAL" THE TACTICAL EDGE Spring 2003 page 47.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

105

tactical & riot Equipment Aerosol Projectors by DEFENSE TECHNOLOGY DUTY aerosol A complete line of aerosol projectors for duty issue or specialized assignment, including OC, chemical or blended formulations in either stream, fog or foam delivery systems.

Stream Aerosols are designed for target-specific long-range deployments, with a minimal likelihood of cross-contamination. Their primary physical effect is on vision.

The world's most widely used pepper spray in law enforcement and corrections. FIRST DEFENCE® are the only products that are backed by a comprehensive effectiveness study and the only products that address health and environmental risks.

high volume stream Aerosols are designed for maximum output and long-range deployment for multiple subjects. Their primary physical effect is on the respiratory system.

FIRST DEFENCE products feature food-grade formulations only, making them completely non-flammable and environmentally friendly.

Mk-3

First Defense® Pepper 10™ 5.5 Pepper Mace® 5.5 Pepper Mace® Pepper Foam ™ Inert Strem Inert Fog Inert Foam

5039 (Shown) 5839 3005 Stream 3035 Fog 5036 (Shown) 5139 5139F 5136

foam Designed for sensitive environments such as courtrooms, hospitals and incarceration facilities, foam delivery aerosols minimize cross-contamination. Their primary physical effect is on vision. fog Designed to distribute a large quantity of formulation over a widespread area, fog delivery products primarily affect the respiratory system.

Mk-46H Horizontal First Defense® Inert Stream

Mk-21

5846L (shown) 5946L

First Defense® Inert Stream

5721 (shown) 5621

Mk-46V Vertical Mk-4

First Defense® Pepper 10™ 5.5 Pepper Mace® 5.5 Pepper Mace® Pepper Foam ™ Mace® OC/CN Mace® CN Inert Foam Inert Stream Inert Fog

Mk-6

First Defense® Pepper 10™ 5.5 Pepper Mace® Inert Stream

First Defense® Inert Stream 5049 (shown) 5849 (shown) 4005 Stream 4035 Fog 5046 4000 4021 5146 5149 5149F

5069 (shown) 5869 6005 Stream 5169

MK-46 and MK-21 Sold FILLED

1 First Defense® Stream X2 MK-4 5249 First Defense® Stream X2 MK-3 5239 Not Shown First Defence X2 has all the industry-leading attributes of the original First Defence but with twice the capsaicin concentration for extra pungency. It also uses an environmentally safe propellant, nitrogen, to project a stream 12 feet.

CROWD MANAGEMENT DUTY AEROSOL

Mk-7

Pepper 10™ 5.5 Pepper Mace®

5879 7005 Stream

FIRST RESPONSE TACTICAL DEPLOYMENT

Mk-8

First Defense®

Mk-9

First Defense® 5.5 Pepper Mace® Pepper Foam ™ Mace® OC/CS Mace® CS Inert Stream Inert Fog Inert Foam

106

5746 (shown) 5646

2 First Defense® Stream 360° MK-4 5449 First Defense® Stream 360° MK-3 5439 Not Shown A true breakthrough in aerosol performance, First Defence 360° delivers a consistent stream pattern at any angle and any orientation. Using our trusted OC formula, it is propelled by compressed air with barrier separation from the liquid formulation. No additional training or education is required for use. Available in MK-3 and MK-4 sizes. 3 First Defense® MK-4 5049 The original, patented, fully tested formula MK-4. Over many years of safe, effective use, it has proven itself to be the pepper spray of choice for law enforcement and corrections the world over. 1

5089 (shown)

5099 (shown) 9005 Fog (shown) 9040 (shown) 9030 9020 5199 5199F 5196

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical & riot Equipment Chemical Munitions and Projectiles by DEFENSE TECHNOLOGY specialty impact munitions exact® impact The eXact™ iMpact has been rigorously tested to ensure that its impact, energy and accuracy remain consistent and accurate through engagment distances from 5 to 100 or more feet. Plus, smokeless powder gives you consistent velocities and unobscured vision.

Direct Impact® The 40mm Direct Impact® is a “point-of-aim, point-of-impact” direct-fire round. The crushable foam nose provides sufficient pain stimulus through blunt trauma with the added feature of an irritant powder to maximize the potential for incapacitation without serious injury. A smokeless powder propellant ensures unobscured visibility and more consistent velocities with the Direct Impact round.

40mm Sponge Round

1 Inert 2 OC 3 Marking

6325

The revolutionary 12-gauge Drag Stabilized® bean-bag round is the most accurate 12-gauge specialty impact round available today, up to sixty feet and beyond. This pinpoint accuracy is made possible by the round's tear shape and unique multi-tail design. It's built so strong, it reduces fabric rupture either in the air or on impact.

Drag Stabilized

Tear drop Bean Bag 12 Gauge 3027

These 12-gauge rounds were specifically developed for routing, protecting chemical devices or targeting instigators.

6323 6320 6326

4. 12-Gauge 32 Cal. Stinger Rubber Balls 3016 5. 12-Gauge Fin Stabilized Round 1088 6. 32 Cal. Stinger Rubber Balls High Velocity 1089

Stinger® rubber ball Grenade (shown) To psychologically and physiologically maximize less-lethal force against the most stubborn of crowds, the Stinger Rubber Ball Grenade offers the multiple stimulus of light, sound, rubber pellets and optional CS or OC chemical agents.

rubber ball blast Grenade (shown) While the Stinger Rubber Ball Grenade is a combination specialty-impact munition and diversion device, the Rubber Ball Blast Grenade is a combination irritant and diversion device. Designed for maximum effect, it delivers up to 3 stimuli for psychological and physiological effect: light, sound and chemical agent or OC.

Rubber Pellet Only CS OC

OC Blast CN Blast CS Blast Practice

1090 1088 1089

1095 1096 1097 1098

Foam Baton

37mm rounds

7. 37mm Multiple Foam Baton 1178 8. 37/40mm Multiple Foam Baton 6299 9. 40mm Multiple Foam Baton 6099

15. 16. 17. 18.

10. 32 Cal. Stinger® Rubber Balls 11. 60 Cal. Stinger® Rubber Balls 12. Multiple Wood Baton 13. Multiple Rubber Baton 14. Bean Bag

37/40mm Rounds 15

40mm Rounds

32 Cal. Stinger® Rubber Balls 60 Cal. Stinger® Rubber Balls Multiple Wood Baton Bean Bag

Head Office: 1-866-652-2877

1197 1199 1176 1177 1225

6296 6297 6298 6225

West: (604) 526-1631

19. 20. 21. 22. 23.

Prairies: 1-866-652-2877

32 Cal. Stinger® Rubber Balls 60 Cal. Stinger® Rubber Balls Multiple Wood Baton Multiple Rubber Baton Bean Bag

East: 1-877-993-9968

6096 6097 6098 6064 6025

107

tactical & riot EquipmEnt Chemical Grenades & Projectiles by dEFEnSE tEcHnoloGY cHEmical When crowd resistance elevates, our chemical grenades and projectiles offer solutions for both indoor and outdoor situations. Alternatives such as OC, CN, CS, and Smoke provide coverage in pyrotechnic and non-burning carriers. These grenades and munitions offer the maximum force option in the management of crowds and the control of civil and correctional disorder.

37MM Cn skaT sheLL The Skat-Shell速 is widely used as a crowd management tool for the rapid and broad deployment of chemical agent by a single grenadier. The Skat-Shell速 contains separate sub-munitions that function individually once the round is discharged. The scattering effect and the rapid burning of the sub-munitions provides a wide area of coverage, minimizing the potential of being thrown back. OUTDOOR ONLY.

CS TRiPLE CHASER The Triple-Chaser速 is a fast burning pyrotechnic grenade designed for crowd management. It consists of three separate canisters pressed together with separating charges between each. When deployed, the canisters separate and land in a short period of time. OUTDOOR ONLY. 1026

1171

Cs han-baLL Pyrotechnic Outdoor Chemical Grenades

Cn sPeDe-heaT速 Pyrotechnic Outdoor Chemical Grenades

1092

1071

CS POCkET TACTiCAL Pyrotechnic Outdoor Chemical Grenades

CS RiOT COnTROL Pyrotechnic Outdoor Chemical Grenades 1082

1016

40MM Cn Long-range sPeDe-heaT Pyrotechnic Outdoor Projectiles

37MM Cs Long-range sPeDe-heaT Pyrotechnic Outdoor Projectiles

OC inSTAnTAnEOuS BLAST POWDER gREnADE Non-Pyrotechnic Chemical Devices

37MM oC MuzzLe bLasT POWDER Non-Pyrotechnic Chemical Devices

40MM oC MuzzLe bLasT POWDER Non-Pyrotechnic Chemical Devices

6181

1182

1040

1140

6040

108

miLiTARy STyLE gREEn SmOkE Pyrotechnic Outdoor White & Coloured Smoke Grenades

miLiTARy STyLE RED SmOkE Pyrotechnic Outdoor White & Coloured Smoke Grenades

hC-s Large MaX SmOkE Pyrotechnic Outdoor White & Coloured Smoke Grenades

HC miLiTARy STyLE mAx SmOkE Pyrotechnic Outdoor White & Coloured Smoke Grenades

1065

1067

1073

1083

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical & riot Equipment Specialized Devices & Munitions by DEFENSE TECHNOLOGY tactical These specialized devices and munitions are designed to be deployed by tactical teams during high-risk warrants, hostage rescues and barricaded-subject situations.

12-gauge cs liquid barricade penetrator

37mm cs powder ferret® round

40mm cs liquid Ferret® round

1192

1262

3012

3090

CS Flameless Tri-Chamber

OC/CS Aerosol 1050

1032

oc Flameless Expulsion

12-GAUGE TKO BREACHING ROUND

2040

3105

Multi-Port Plus body The most tried and tested Distraction Device® in law enforcement, the Multi-Port Plus Reload produces the industry’s most powerful pressure wave, because light and sound alone may not be enough. Its 15 grams of flash powder represent the most dynamic explosive content offered, and although flash powder may produce a little more smoke than devices utlilizing smokeless powder, the report and pressure wave are far superior to those of smokeless powder. Multi-Port Plus body Multi-Port Plus with Safety Clip Reload Multi-Port Plus with regular Reload

#25 Tactical Distraction Device® This device is a non-reloadable hybrid version of the first reusable, non-bursting canister Distraction Device® and the newly redesigned Multi-Port Plus. The #25 Tactical Distraction Device® provides the industry’s most powerful pressure wave. The #25 Tactical Distraction Device® pressure wave does not exceed limits that may lead to ear injuries. 7001NR

7000 7001SC 7001

The Multi-Port Plus can be initiated, on command, from a remote point, alleviating initiation delay when instantaneous results are desired. It is ideal for operations utilizing “bang poles,” deterring retreat and achieving space denial from predetermined areas. Some assembly and accessories are required.

Shock Tube

Head Office: 1-866-652-2877

12-gauge oc powder barricade penetrator

1000’ Shock Tube Splicing Tubes Staging Spike Initiator

Staging Spike

150944 7023 (not shown) 7030 7040

West: (604) 526-1631

Prairies: 1-866-652-2877

Initiator

East: 1-877-993-9968

109

tactical & riot Equipment Less Lethal Solutions by DEFENSE TECHNOLOGY tactical deployment Penn Arms Multi-Launcher

launchers

Defense Technology is the exclusive supplier of this fixed-stock version of the Penn Arms PGL65-40. The double-action unit comes with unique features including a shortened stock, extended sight rail, and pre-drilled and pre-tapped holes for the inclusion of additional accessories. 40mm 1377

Launcher 40mm Product Code

1325

Our 40mm single - or double - action launcher can fire all Defense Technology 40mm rounds. With a one-piece steel frame, it incorporates an aluminum rifled barrel that comes equipped with a weaver scope-mounting rail and a removable post sight. A padded nylon sling is included. Launching cartidge 12mm

Launching cartidge 37mm

1210

1270

Gas Pistol 37mm 1314

Multi-Launcher 37mm Gun with Fixed Stock

1319

Full Stock Gas Gun 37mm 1315

Tactical Gas Gun 37mm 1316

Baton Accessories by BATON SAVER

BATON SAVER END CAP Product # ARO-BTNSUR

110

If you use an ASP or Gall’s collapsible baton, you owe it to yourself to use BatonSaver. Easily replacing the standard end cap on these batons, BatonSaver safety cap is packed with enhanced safety features that greatly benefit the public safety professional. Once you hold BatonSaver safety cap, you will feel the enhanced safety features it provides. Whether it is the fluid motion from duty-belt retrieval to extension, or the total grip enhancement and increased baton retention

during the swing, BatonSaver truly is a “must have” for any collapsible baton user. Ultra-Fast Duty Belt Retrieval The hooked design allows for sure retrieval of the baton, even with a single finger. Total Grip Enhancement and Increased Baton Retention You will find you are able to swing harder while actually relaxing your grip - your baton, with BatonSaver your baton stays securely in your hand.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TACTICAL & RIOT EQUIPMENT

Batons and Accessories by AETCO BATONS

FIXED HANDLE

STRAIGHT ALUMINUM BATON

Polymer handle, injection molded around an aluminum insert. Aluminum insert is threaded on one end and contoured to properly fit against the body of the baton.

Black Anodized Length: 24" and 26" Knurled Grip Available POLYMER RIOT BATON Black Polymer Length: 30" and 36" Grenade Grip Available on 1 or 2 Ends. *Shown with Grenade Grip

SPIN HANDLE Machined aluminum handle with a patented "rotating" bushing built into the base or bottom portion. The rotating bushing improves control and increases baton speed. Can be very effective when wearing gloves.

WOOD RIOT BATON Hickory, Black or Natural Length: 30", 36", and 42" Fluted Grip Available on 1 or 2 Ends.

*Shown with Fluted Grip

ALUMINUM RIOT BATON Black Anodized Length: 30" and 36" Knurled Grip Available on 1 or 2 Ends. *Shown with Knurled Grip

ROLL ON RUBBER GRIP This rubber roll on grip is an easy way to improve the grip on any wood, plastic, or aluminum baton 1.25" in diameter.

HANDLE GROMMET For larger diameter at end of handle. Improves gripping, especially when using the FIXED HANDLE MODEL baton. Easily positioned.

RUBBER SLEEVE GRIP A rubber slide on sleeve for a slightly larger grip when installed on any wood, plastic or aluminum baton 1.25" in diameter.

TAPER GROMMET A baton stop that supports the baton in the belt carry ring. Fits all 1.25" diameter wood, polymer, or aluminum batons. (Shown with Taper Grommet and Roll on Rubber Grip) THONGS & STRAPS Leather Thong is 45 inches long. The leather Strap is approximately 1⁄2" wide and made to fit into a 1⁄2" groove. The ends are braided together, forming a wrist strap. Braided Grip shown on a 36" Black Hickory Baton with a Fluted Grip on each end. ALUMINUM SLIDE HANDLE BATON The Aluminum Series Baton, made of aircraft grade aluminum tubing, will not bend, warp, or break, even when exposed to extreme hot or cold temperatures. End caps are smooth and permanently pressed into place to avoid unnecessary injury. Available in Fixed or Spin Handle. Can be ordered with Knurled Grip on the end. POLYMER SLIDE HANDLE BATON The Polymer Series Baton is made of solid black acetate polymer material. The ends are smooth to avoid unnecessary injury. Available in Fixed or Spin Handle. Can be ordered with Grenade Grip on end. STRAIGHT POLYMER BATON Black Polymer Length: 18", 20", 22", 24", 26", and 29" Grenade Grip available STRAIGHT WOOD BATON Hickory, Black, or Natural Length: 24", 26", and 29" Fluted Grip Available

Head Office: 1-866-652-2877

* Custom design available

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

111

TACTICAL & RIOT EQUIPMENT Compressed Air Systems by PEPPERBALL PEPPERBALL® CUSTOM CARBINE-S LAUNCHER™: CUSTOMIZED FOR DUTY This semi-automatic PepperBall® launcher is target accurate at 60 feet, and can create a cloud of pepper powder up to 150 feet away. The highly versatile Custom Carbine-S can launch live pepper, inert training or glass breaking projectiles. It is ideally suited for scenarios such as crowd/riot control, violent suspects, vehicle extraction, cell extractions or returns, and many other types of encounters.

160 round capacity hopper

FEATURES: • Barrel, projectile velocity, internal and external parts customized for lawenforcement use. • Target accurate to 60 feet, area saturation with pepper agent to 150 feet. • Semi-automatic action. • 160 round hopper capacity • Works with pepper, training, glass break, marking, or water projectiles. • Special hopper breach for loading single glass break rounds and following with Pepper for vehicle or other extraction applications. • Works with Riot Vest for expanded capacity – up to 450 rounds • Stainless steel hardware up-grade available. Extra enduring, excellent for use in harsh/marine environments.

Attachment point for optional sling

Safety

Tactical Grip

Shown with Stainless Steel upgrade (optional).

SPECIFICATIONS: We’ve moved the hopper to the right to provide you with a direct line of site, and a wider field of view.

STAINLESS STEEL UPGRADE KIT A special stainless steel upgrade kit is available. Includes all external hardware for launcher and hopper, as well as hopper latch mechanism.

Action: Semiautomatic, open bolt blow-back. Power: High pressure air. 3000 psi. Hopper Capacity: 160 PepperBall projectiles. Barrel length: 8.5”. Overall length (with barrel, no high pressure air bottle) 28“ Weight: (without high pressure air bottle) 2.9 lbs.

DIRECT LINE OF SIGHT WIDER FIELD OF VIEW

A clear plastic elbow from the hopper to the launcher allows you to visually confirm exactly what type of round you have loaded and are launching.

CROWD CONTROL VEST The Patriot 450 Riot Kit expands your rounds capacity to 450. The kit includes a four pouch vest with suspenders, 4 speed pod loaders, a 48 cubic inch high pressure air bottle, hose with slide check and quick disconnect. Ideal for situations which may require large employment of projectiles.

CARRY CASE A carry case is available for the Custom Carbine. It carries speed pod loaders with rounds, extra high pressure air bottles, and more. Designed for the Custom Carbine series (both “S” and “T” models) and provides exceptional protection and portability.

SA10 PISTOL

10-pack of 10-round loading tubes (projectiles not included)

Stop suspects with the portable SA10 PepperBall Launcher. This pistol is lightweight and holds 10 rounds, making it a perfect solution for patrol and many other tactical situations. Rugged holster designs for the shoulder and thigh provide flexibility and versatility for carrying the SA10. A soft case with belt holster is also available. The SA10 is powered by a CO2 cartridge and is accurate out to 30 feet on a target and 100 feet for area saturation. It is also available with blue or yellow top loaders. CO2 is sold separately.

112

Shoulder Holster Part # PS-HLSTR-S

Head Office: 1-866-652-2877

West: (604) 526-1631

Thigh Holster Part # PS-HLSTR-T

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical & riot equipment Tactical & Riot Equipment by DAMASCUS Protective Pads ELITE HYBRID KNEE GUARDS INTRODUCING THE NEW DKX1 : VORTEX™ (NEW) The most comfortable hybrid knee pad ever built specifically for L.E. & military use … just so happens to offer some serious protection. The NEW DKX1 VORTEX™ from DPG : Damascus Protective Gear® have a unique hybrid construction which combines high and low density materials to deliver maximum "cush", while the contoured ergonomic shape offers superior knee pad support. Part of the DKX1’s secret is its GEL and GEL foam center cores which contain two types of shock-absorbing gels bonded together to create unsurpassed comfort. The GEL also absorbs body weight and disperses it within the pad.

• Heavy-duty, hard-shell composite cap which is truly NON-SLIP and plants you firmly on any surface. • The GEL cores and the unique caps then work together to produce the best possible knee zone protection from blunt force trauma. • Perforated breathable neoprene coated with silicon at the tops of the pads hug the leg above the knee. • 1000 denier nylon Cordura® braces and protects the rest of the knee area. • Both straps feature silicone coated strips to prevent pads from slipping in motion, and reinforced rivots. • Lined and protected with AEGIS Microbe Shield® which controls bacteria and fungus that cause odor, staining, and material deterioration. • The ergonomic design of the DKX-1 as a unit conforms to the knees like no other and produces superb mobility. The pads have been extensively designed specifically for law enforcement and military to produce the highest level of durability and extended knee pad life. • Available Colors DKX1 (black), DKX2 (od green), DKX3 (coyote tan), DKX4 (ACU digital camo)

KNEE / ELBOW / SHIN GUARDS DNSG3 : IMPERIAL™ Neoprene Knee/Shin Guards with Trion™ nonslip pads

DKP : IMPERIAL™ Hard Shell Knee Pads • Hard shell polyurethane thermoplastic non-slip knee caps • Reinforced foam padding for shock absorption and wear comfort • Two adjustable Elastic straps with Velcro® and D-rings for the most secure fit • High tenacity, air textured DuPont Ultra Cordura® nylon outer materials • Superior abrasion and tear resistance • Dull finish non-reflective tone-on-tone grommets • Ergonomic curved form • Interior name tags for personal identification • Washable • One size fits all

• Stealthy durable neoprene outer shell with reinforced stitching throughout • Silent and form fitting • Trion™ Non-slip grip technology on knee pads • Shock absorbing 10mm foam, plus a second layer of polyurethane foam in knee pads for max comfort • Multiple adjustable elastic straps and Velcro® closures for secure fit for various leg girths • Extended padded protection in shin section to deflect debris • Can be worn inside or outside of gear • One size fits all

Colors and Style #’s: DKP1 / black, DKP2 / OD Green, DKP3 / Coyote Tan, DKP4 / ACU Digital (NEW), DKP5 / Foliage Green (NEW)

DNKP4 : IMPERIAL™ Neoprene Knee Pads with Trion™ non-slip pads • Stealthy durable neoprene outer shell with reinforced stitching throughout • Silent and form fitting • Trion™ Non-slip grip technology on knee pads • Shock absorbing 10mm foam, plus a second layer of polyurethane foam in knee pads for max comfort • Multiple adjustable elastic straps and Velcro® closures for secure fit for various leg girths • Can be worn inside or outside of gear • One size fits all

DEP : IMPERIAL™ Hard Shell Elbow Pads • One size fits all Colors and Style #’s: DEP1 / black, DEP2 / OD Green, DEP3 / Coyote Tan, DEP4 / ACU Digital (NEW), DEP5 / Foliage Green (NEW) DNE4 : IMPERIAL™ Neoprene Elbow w/non-slip pads

FP10 : IMPERIAL™ Forearm protectors

• One size fits all

• Forearm protection from wrist to elbow • Lightweight EVA foam with hard shell plastic inserts • Two adjustable straps • Protected with durable black fire retardant polyester mesh • One size fits all

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

113

tactical & riot equipment Tactical & Riot Equipment by DAMASCUS Protective Pads, BODY PROTECTION, kits BODY PROTECTION

kit options DCP2000 : IMPERIAL™ Upper body and Shoulder Protector • Lightweight cellular EVA foam pad design for maximum movement and protection • Neck-roll features 40mm high-density sponge foam • Should pads with hard shell plastic inserts and foam padding • Protected with a durable fire retardant tight-weave polyester mesh • Adjustable reinforced straps with Velcro® • Non-ballistic • Approximately 2 lbs (.9 kg) Size range (as measured by chest size): • Medium: 38”-42” (96.5 – 107 cm) • Large: 42”-46” (107 – 117 cm) • X-Large: 46”-52” (117 – 132 cm) • XX-Large: 52”-56” (132 – 142 cm) • XXX-Large: 56”+ (142 cm+) Reflective name plates also available. Sold separately.

DSG100 : IMPERIAL™ Hard Shell Knee/Shin Guards • Hard-shell knee caps with Trion™ Non-slip grip technology • Hard-shell polyethylene shin plates with dull black finish to avoid reflection • Heavy-duty reinforced foam padded nylon inner leg support • High tenacity, air textured DuPont Ultra Cordura® nylon outer materials • Multiple adjustable elastic straps and Velcro® closures for secure fit for various leg girths • Adjustable (and removable) foot guard plates • Interior name tags for personal identification • Washable Available Sizes: • Md/Lg – 9” shin guard (22.86 cm) / 15” total length (38.1 cm) *excluding foot guard • Xlg – 11” shin guard (27.94 cm) / 19” total length (48.26 cm) *excluding foot guard

Damascus Protective Gear offers the following kit options for ease of ordering. The pre-selected packages include the most popular protective items we make for departments and agencies worldwide, seeking a complete “head-to-toe” protective package. Customized packages can also of course be assembled with the assistance of our experienced sales staff. Please note that some items require the customer to select a specific size when ordering. They are noted with an: * . Additional product information including size ranges can be found on the preceding pages. K1 (PICTURED) • One #DCP-2000 Imperial™ Upper Body Protector* • One Reflective name plate • One pair of #FP10 Imperial™ Forearm protector • One pair of #DRE25 Reactor™ Full finger tactical gloves* • One pair of #DSG-100 Imperial™ hard shell knee/shin/foot guards* • One #NH50L Nomex® lightweight hood (black) • One #DB-1 Gear bag K2 • One #DCP-2000 Imperial™ Upper Body Protector* • One Reflective name plate • One pair of #FP10 Imperial™ Forearm protector • One pair of #CRT100 Vector 1™ Carbon Tek riot control gloves* • One pair of #DSG-100 Imperial™ hard shell knee/shin/foot guards* • One #NH100 Nomex® heavyweight hood (black) • One #DB-1 Gear bag K3 • One #DCP-2000 Imperial™ Upper Body Protector* • One Reflective name plate • One pair of #CRT300 Vector 3™ Ultimate riot control gauntlets* • One pair of #DSG-100 Imperial™ hard shell knee/shin/foot guards* • One Pair of #DEP-1 Imperial™ elbow pads (black) • One #NH100 Nomex® heavyweight hood (black) • One #DB-1 Gear bag K4 (NEW) • One #DCP-2000 Imperial™ Upper Body Protector* • One Reflective name plate • One pair of #FP10 Imperial™ Forearm protector • One pair of #DSG-100 Imperial™ hard shell knee/shin/foot guards* • One #TG20 Imperial™ Thigh / Groin Guards • One #DB-1 Gear bag

TG20 : IMPERIAL™ (NEW) Thigh / Groin Protector • Designed to compliment the #DCP2000 Imperial Chest and Shoulder Protector. • Lightweight cellular EVA foam padding offers excellent protection from blunt trauma. • Polyester mesh lines the inside which offers comfort and breathability. • Four inch elastic straps with Velcro wrap around the thigh for a secure and snug fit. • Adjustable and removable padded groin protector • Non-ballistic • One size fits all

114

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical & riot equipment Tactical & Riot Equipment by DAMASCUS FX-1 FLEX FORCE™, name plate tags FX-1 FLEX FORCE™ FX1 : FlexForce™ Modular Hard Shell Crowd Control System The #FX-1 FlexForce™ Modular Hard Shell Crowd Control System is the ultimate highthreat level riot control, domestic disturbance, and cell extraction suit. The FlexForce™ design provides substantial protection from blunt force trauma without sacrificing the fit or comfort. The suit is lightweight and ranks highest in easy to put on or take off in a moments notice. The front and back hard shell panels have a modular flex design allowing for all shapes and sizes to fit comfortably with out sacrificing much needed mobility. The forearm guard offers a much more comfortable elbow portion of the pad, which allows more flexibility. The knee/shin guard has a non-slip surface, which keeps you planted in position. The FX-1 is a considerably improved fitting system over competitor models and a noticeably better price point. Upper Body and Shoulder Protection • Hard shell front and back panels feature a unique Damascus® 3-panel flex design for optimum movement, fit and comfort • 3mm Electrum XK8™ hard shell front and back panels • Modular front and back panels are steel riveted together with Cordura® nylon connector straps which attach by Velcro® • Shock absorbing Protium™ foam with a Polyester mesh covers the chest, back, shoulder, and upper arm • Electrum XK8™ plate with shock absorbing Protium™ foam covers both top of shoulder and upper arm • Polyester mesh lines the inside of the upper body and shoulder portion which offers comfort and breathability for long term wear • Reflective Police, Sheriff, or Corrections labels can be attached to the front panel for identification • Adjustable Straps fasten with durable nylon elastic and Velcro® Forearm Protector • Two piece hard Electrum XK8™ outer shell provides flex needed by your forearm and elbow. • Shock absorbing Protium™ foam covered with 420 denier Cordura nylon • Polyester mesh lines the inside which offers comfort and breathability • Adjustable straps fasten with durable nylon elastic and Velcro® Thigh and Groin Protector • Hard Electrum XK8™ outer shell on thigh and hip sections • Shock absorbing Protium™ foam with 150 denier Cordura nylon covers the entire outside • Polyester mesh lines the inside which offers comfort and breathability Tailbone pad has a Electrum XK8™ plastic plate laminated to the Protium™ foam Groin section has a inner Electrum XK8™ shell with a Protium™ foam padding and mesh cover Adjustable Straps fasten with durable nylon elastic and Velcro® Knee and Shin Guards • Hard Electrum XK8™ knee caps with super non-slip grip • Hard shell Electrum XK8™ shin plates with dull black finish to avoid reflection • Heavy-duty reinforced Protium™ foam padded nylon inner support • Inner support riveted to the shin plates for ultimate durability • Multiple adjustable nylon elastic and Velcro® straps give a secure fit • Removable adjustable foot guards

Name plate tags These reflective name plate tags are 9” wide by 3” tall. They are made for use on all Damascus® KORE Tactical Bags™, DCP2000 : IMPERIAL™ Upper Body Protectors, and the FX-1 : FlexForce™ Crowd Control System. POLICE (NPPD) SHERIFF (NPSD) CERT (NPCO) CORRECTIONS (NPCD)

Sizing • Each piece of the suit fastens and adjusts quickly with durable nylon straps, Velcro®, and quick connect clips which allows each individual a custom fit. • Available in sizes MD, LG, XLG, XXLG, XXXLG

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

115

tactical & riot equipment Tactical & Riot Equipment by DAMASCUS TACTICAL GEAR BAGS, HOODs, sLEEVES TACTICAL GEAR BAGS

HOODS & SLEEVES DB1 : KORE TACTICAL™ Gear Bag

NH50L Lightweight Hood made of Nomex®

The DB1 is designed to carry Damascus Crowd Control and/or SWAT gear and includes a separate helmet storage area. Quality construction consists of 1000 denier, water resistant Cordura nylon, heavyduty zippers and removable nylon web shoulder strap. Nylon web carry handles are on both the sides and ends of the DB1. Features include a removable rigid bottom in the main compartment and padded exterior walls in the helmet compartment. Three zippered cargo pockets and two zippered mesh pockets on the exterior hold a wide variety of items. Velcro® straps on the padded top can secure a baton or flashlight.

• • • • • •

NH100H Heavyweight Hood made of Nomex® • • • • • •

Dimensions • Total dimensions: 34"L x 10"W x 12"H • Large interior compartment: 20"L x 12"W x 12"H • Small interior compartment: 14"L x 12"W x 12"H Available in black only

• • • •

• • • • • •

1000 denier water resistant Cordura nylon Velcro® Flashlight or Baton Holder on top Velcro® Identification Patch on top 3 Heavy duty zippered pouches on ends of bag Front has expandable baton holder, small flashlight pouch, clipboard and radio holders. Inside features two zippered pouches and an adjustable divider with rigid bottom. Removable padded shoulder strap. Available in black only

Head Office: 1-866-652-2877

8 ounce 100% Nomex® Approximately 18” (45cm) flared Colors: black, OD green, and tan U.S. Made Size: One size fits all Kevlar® version: KH250H

K25 Sleeves made of Kevlar® • 2-ply 100% Kevlar® to resist blades and scratches • Can be worn under or over clothing • Thumb holes • Heat and flash resistant • U.S. Made • Sold in pairs • Size: sm/md (16” length (40cm) OR lg/xlg (19” length (47.5cm)

Dimensions • Total dimensions: 24”L x 10”W x 12”H • Interior Compartment: 17”L x 10”W x 12”H • Available in black only

116

8 ounce 100% Nomex® 15” length (37.5cm) Colors: black, OD green, and tan U.S. Made Size: One size fits all Kevlar® version: KH100H

NH250H Heavyweight Hood with flared bib made of Nomex®

PB2: KORE TACTICAL™ Duty Bag • • • •

3 ounce 100% Nomex Approximately 18” (45cm) Colors: black, OD green, and tan U.S. Made Size: One size fits all Kevlar® version: KH50H

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical & riot Equipment Tactical & Riot Equipment by hatch Nomex Hoods armorcool™ Head wrap

fleece balaclava

The skull cap designs provide heat and flash protection. The unique wicking NOMEX® material helps keep the head cool under a helmet or can be worn alone. Will not support flame or decompose up to 800°F (427°C). Constructed entirely of 7 oz. 100% NOMEX® material and NOMEX® thread.

Designed to meet the NYPD winter requirements, providing excellent warmth and comfort to the head, face and neck during cold weather. Constructed of plush 100% polyester anti-pilling knitted fleece. Extended 23” (58.5 cm) length is long enough to tuck into your coat. Cinch drawstrings with barrel locks permit adjustment of face opening to seal out the cold, or open completely to wear only around the neck in less severe conditions.

NSK100 - black NSK250 - coyote NSK150 - OD NSK200 - foliage

one size fits all

FB2000 one size fits all

lightweight Hood with nomeX®

Heavyweight Hood with nomeX®

lightweight Hood with Kevlar®

This lightweight design provides a moderate amount of heat and flash-protection. Will not support flame or decompose up to 800°F (427°C). Constructed entirely of 3 oz. lightweight 100% NOMEX® material and NOMEX® thread. 18 inches in length (45 cm).

This heavyweight, shorter version provides heat and flash-protection. Will not support flame or decompose up to 800°F (427°C). Constructed entirely of 7 oz. 100% NOMEX® material and NOMEX® thread. 15 inches in length (37.5 cm).

Provides moderate heat, flash, and cut-protection. Will not support flame or decompose up to 800°F (427°C). Constructed of 3 oz. lightweight 100% KEVLAR® material and KEVLAR® thread. 18 inches in length (45 cm).

NH2500 - black one size fits all NH3000 - desert tan NH3500 - OD NH7000 - foliage NH7500 - coyote

Heavyweight bibbed Hood with nomeX®

Heavyweight Hood with Kevlar®

Provides heat and flash-protection. The extended bib offers extra protection. Will not support flame or decompose up to 800°F (427°C). Constructed entirely of 7 oz. 100% NOMEX® material and NOMEX® thread. 15 inches in length (37.5 cm).

Provides heat, flash, and cutprotection. Will not support flame or decompose up to 800°F (427°C). Constructed entirely of 7 oz. 100% KEVLAR® material and KEVLAR® thread. 15 inches in length (37.5 cm).

nH6500

kH4500

NH5000 - black NH5500 - OD

one size fits all

kH1500

one size fits all

protective pads XtaK™ Knee & Elbow pads

XtaK™ Knee Pad Extremely light and flexible, yet this innovative design provides superior protection and shock absorption with the flexibility to move the way your body moves. XTAK is the lightest, strongest product of its kind ever created. Unique X-shaped thermal plastic urethane (TPU) shell. EVA high-density foam for superior shock absorption. Lightweight TPU and Cordura® nylon construction. Forceful spring-back action that gives you the protection you need. Cool Max™ inner surface for wicking moisture away. Anti-skid inner surface to keep pad secured. Spandex adjustable straps with Hatch Rapid Deployment Clips and hook and loop closure for secure fit.

EVA high-density foam for superior shock absorption Matte-colored hard TPU outer shell Curved form to align with the natural shape of the knee and provide powerful spring-back action Anti-skid inner surface to keep knee pad secured Hatch Rapid Deployment Clips for quick attachment Cordura® nylon outer fabric

XTAK 200 - Desert tan XTAK 100 - black XTAK 300 - Digitized camo XTAK 400 - OD

XtaK™ elbow Pad Elbow pads with the identical features listed above. Elbow attachment features comfortable neoprene back with adjustable hook and loop and other features. Stretch neoprene attachment straps with hook and loop closure. XTAK 150 - black XTAK 250 - Desert tan XTAK 350 - Digitized camo XTAK 450 - OD

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

117

tactical & riot Equipment Tactical & Riot Equipment by hatch protective pads centurion™ Knee Pads

centurion™ neoprene Knee Pads

For use where body protection is a must, the Centurion Knee Pads feature half-inch, highdensity foam covered in durable Cordura® nylon. Polyurethane thermoplastic non-slip caps fastened with color keyed grommets provide additional shock absorption and ensure long lasting wear. Dual hook and loop fastened 2” wide (5.1 cm) elastic straps with reinforced bar tacking provide a comfortable and secure fit for all sizes. Hatch Rapid deployment Clips for quick don and off.

Non-reflective and silent, these Neoprene Knee Pads are a favorite of SWAT, corrections, and tactical professionals for their light weight and extreme comfort. They are flexible and fit comfortably under or over clothing, making them ideal for long-term wear. Padding consists of shock-absorbing 10mm foam and a second layer of polyurethane foam, covered by a durable nylon laminated neoprene outer layer. Strategically placed Eastex® Slip-Not™ material provides excellent grip and extends wear. Hook and loop elastic closures provide a comfortable and secure fit.

KP250 - black KP250C - camo KP250T - Desert Tan KP250G - OD

one size fits all

NK45 - black NK45G - OD

one size fits all

centurion™ elbow Pads

centurion™ neoprene elbow Pads

Centurion Elbow pads provide excellent protection with half-inch, high-density foam covered in durable Cordura® nylon. Polyurethane thermoplastic non-slip caps fastened with color-keyed grommets provide additional shock absorption and ensure long lasting wear. Dual hook and loop fastened 1.5” wide (3.8 cm) elastic straps with reinforced bar tacking provide a comfortable and secure fit for all sizes. Hatch Rapid deployment Clips for quick don and off.

Elbow pads with all of the identical features listed above. Padding consists of shock-absorbing 10mm foam and a second layer of polyurethane foam, covered by a durable nylon laminated neoprene outer layer. Strategically placed Eastex® Slip-Not™ material provides excellent grip and extends wear. Hook and loop elastic closures provide a comfortable and secure fit.

EP300 - black EP300C - Camo EP300G - OD EP300T - Desert tan

NE35 - black NE35G - OD

one size fits all

body protection HUeX100: Hydration reservoir and carrier

centurion™ Hard-shell shin guards

Our CPX2500 and ECB100 Disturbance Control Systems are outfitted to accommodate our own hydration system. High quality, odorless bladder by Nalgene®. 70 oz. capacity. Features the Bite Me™ revolutionary flow control valve for 360º activation and leak-free operation. Woven fabric carrier of 600 denier polyester with attachment points.

Essential equipment for tactical or disturbance control situations, the Centurion™ Hard-Shell Shin Guards feature built-in knee pads. Hard polyethylene shells with interior leg brace support can safely withstand a substantial blow to the leg from non-ballistic weapons or flying debris. Includes adjustable, removable foot protectors. Non-reflective outer surface. Upper knee stabilizing strap with protective padding. Padded outer ankle protector. Three hook and loop elastic straps on the backside of the leg provide a secure fit. Packed in a nylon gear bag for storage sizes.

centurion™ neck Protector with Kevlar® Slash protection for your throat, neck and larynx. Designed to be worn with the Centurion™ and/ or ExoTech® riot suits. 100% 7 oz. KEVLAR®. Comfortable knit construction with double layer thickness. Stretch one-size-fits-all design. 7 3/4” high for full neck protection. knp100

118

TS70 Total length excludes foot guard and ankle protector m: 9” Shin and 13.25” total length (22.5 cm, 33.1 cm) l: 10” Shin and 14.5” total length (25 cm, 36.25 cm) xl: 11” Shin and 16.5” total length (27.5 cm, 41.25 cm)\

one size fits all

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical & riot Equipment Tactical & Riot Equipment by hatch Body protection centurion™ forearm Protectors

Protective sleeves with Kevlar®

An essential part of our Centurion Riot Gear, the FP100 Centurion Forearm Protectors are designed to work with the CPX2500 (or CPX2000) by shielding the entire forearm from the wrist to the elbow (where the CPX shoulder pads end) from blunt force trauma. Construction consists of durable EVA foam covered by hard shell plastic plates encased in black nylon rigging. Interior is coated with polyester brushed tricot for comfort. Adjustable 2” wide (5.1 cm) elastic straps with hook and loop fasteners provide a secure fit. Sold in pairs and weigh approximately 6 ounces each.

The KS19 is an essential piece of tactical equipment protecting the wrist and forearm with 2-ply, 7-ounce 100% KEVLAR® and resists bites, scratches or cuts from sharp objects. The KEVLAR® constructed KS19 is heat and flash-resistant, and will not support flame or combust up to 800°F (427°C). Excellent for deploying flash bangs. This sleeve is very light, breathable and will not restrict movement. Sold in pairs. 19 inches in length (47.5 cm),

Fp100 one size fits all

kS19 one size fits all

centurion™ thigh/groin Protection system

centurion™ groin Protector For additional protection, the GP300 fastens easily to the CPX2500 (or CPX2000) with 1” elastic and nonelastic straps. Hook and loop fasteners to provide groin protection without hindering mobility. Construction consists of durable EVA foam pads with sponge foam covering on the inside for comfort surrounded by a black polyester mesh rigging. Weighs only 8 ounces.

Designed to complement the Centurion Upper Body Chest and Shoulder Protection System, this system was specifically designed for blunt trauma protection during riot control situations. It protects the thigh area and has an adjustable and removable groin protector. Multi-layer protective design with 420 denier outer fabric covers hip and thigh area. Provides excellent shock absorbing protection, and is flexible and comfortable. Four inch elastic with hook and loop wraps around thigh for secure attachment and a web belt secures the system to the waist. TpX200

Gp300

one size fits all

Available in sizes s/m • l/xl • xxl/xxxl

centurion™ upper body and shoulder Protection This protective piece is a must for riot control and cell extractions, effectively protecting the torso and shoulders from blunt force trauma. The lightweight, cellular pad design provides ample protection and allows excellent mobility. Includes attachment points for our HUEX100 Hydration Reservoir. • Torso protection consists of durable EVA foam with 7mm sponge foam on the interior for comfort • Shoulder pads feature hard-shell plastic plates with durable foam padding • The neck roll consists of 40mm high-density sponge foam • All padding is encased in black polyester mesh rigging. The interior is coated with polyester brushed tricot for comfort • Adjustable shoulder straps, waist straps and contoured design allow a secure fit comfortable enough for long-term wear • Will safely absorb blows delivered from blunt objects, but does not provide ballistic protection • Adjustable hook and loop closures and fasteners • Weighs approximately 2 lbs. (.9 kg) and packaged in a nylon drawstring bag for convenient storage • Reflective POLICE, SHERIFF, or CORRECTIONS labels are available that can be affixed to the front or rear of the system

Reflective Labels

CpX2500 Available in sizes (measured by chest size) m: 38 - 42” (96.5 -107 cm) l: 42 - 46” (107-117 cm) xl: 46 - 52” (117-132 cm) xxl: 52 - 56” (132-142 cm) xxxl: 56”+ (142 cm+)

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

119

tactical & riot Equipment Tactical & Riot Equipment by hatch Body protection eXoTeCH SYSTeM Exotech® Hard shell Disturbance control system For hard-shell protection without sacrificing mobility. The cost-effective, lightweight ExoTech® System can be quickly donned or doffed with ease for rapid disturbance control response. The back panel features attachment points to accommodate the HUEX1000 Hydration Reservoir. Provides substantial protection from blunt force trauma. Contour molded polyethylene outer shell features impact ridges that disperse the brunt of the blows. EVA foam inner padding cushions the body. Soft brushed tricot and mesh lines the inside to reduce abrasion and provide long-term comfort. Each piece of the ExoTech® system fastens and adjusts quickly with durable polypropylene and elastic straps with hook and loop closures, allowing a custom fit for a wide variety of body types. Sizing Proper sizing for the exotech® system must be obtained from the following series of measurements and information. Please contact your authorized Hatch distributor to complete an exotech® sizing form. • • • • • •

gender middle kjnee to ankle length chest circumference waist circumference forearm circumference thigh circumference

upper body/shoulder Polyethylene outer shell. L2500 EVA foam & 3mm polyethylene plate chest/back/arm padding. EVA foam & polyethylene plate shoulder padding. Sponge foam & polyester tricot chest/back/ shoulder lining. Mesh chest/back/shoulder outer covering. Mesh arm protector lining. Double riveted polypropylene connector straps and hook and loop fasteners. Commercial grade elastic adjustment straps with hook and loop fasteners. Reflective POLICE, SHERIFF, or CORRECTIONS labels are available that can be affixed to the fro nt of the system. eCB100

Available in sizes xs-s • m-l • l-xl • xxl-xxxl

thigh section

forearm

shin guard

Polyethylene outer shell. Laminated EVA foam & L2500 EVA foam. Mesh inner lining. 150 denier polyester outer covering. Elastic adjusters with hook and loop fasteners

Polyethylene outer shell. EVA foam & polyurethane sponge padding. Mesh inner lining. 420 denier nylon outer covering. Commercial grade adjusters with hook and loop fasteners

PVC knee cap. EVA foam knee padding. 600 denier black polyester outer covering. Tricot & sponge knee and foot protector inner lining. Polyethylene knee and foot protector outer shell. PVC padded suspension braces. Polyester adjusters with hook and loop fasteners. Adjustable/removable foot protector. Padded ankle protector. All components are riveted to outer shell with hook and loop fasteners

eFp150

Available in sizes xs-s • m-l • xl-xxxl

groin section EVA foam padding with mesh outer covering. Inner polyethylene shell. Commercial grade elastic adjusters and connectors eTp200

120

TS70

Available in sizes m • l • xl

Available in sizes xs-s • m-l • xl-xxxl

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TACTICAL & RIOT EQUIPMENT

Tactical & Riot Equipment by SALIENT MANUFACTURING POLE CAMERA

POLE CAMERA MODEL SERIES 1000 SPECIFICATIONS • 2" camera head with 24" built-in infra-red diodes (850nm) 1/3 inch Sony CCD with 70 degree field of view and 400 lines of resolution. • Durable 6" colour and infrared TFT monitor. (Thin Film Transistor) • 123A non rechargeable Lithium battery supply pack. • 2nd battery supply pack included. • Video out jack (normal RCA composite) to record video to a VCR, camcorder. • Telescopic pole is expandable from 27" to 54" enabling a 6ft person to view approximately a height of 10 feet. • Soft side carrying case. • Approximate operational weight of 5 lbs. • Battery run time on full charge approximately 2 to 4 hours depending on run time durations. • 30 day unconditional guarantee. • 1 year limited warranty.

TACTICAL MIRRORS PART # TK3000

PART # TK20/20SE

Tool Kit - 2 Piece Inspection/Pickup Kit Includes: PART # PMG02 & MR02

Tool Kit - 9 Piece Lighted Inspection/Pickup Kit Includes: • 3 lb. & 14 lb. Pickup Magnets • 3 Acrylic Mirrors (Parts # MR 01, 02 & 03) • Acrylic 3X Magnifying Glass 1.75" x 2.5" • Super bright Krypton focusing beam flashlight • Aluminum Carrying Case and 2 AA Batteries

PART # TK4000 Tool Kit - 2 Piece Inspection/Pickup Kit Includes: PART # PMG02 & TF01

PART # TK5000 Tool Kit - 6 Piece Lighted Inspection/Pickup Kit Includes: • 3 lb. & 14 lb. Pickup Magnets • 2 Acrylic Mirrors (Parts # MR 02 & 03) • Acrylic 3X Magnifying Glass 1.75" x 2.5" • Super bright Krypton focusing beam flashlight • Carrying Case

PART # TK1000 Tool Kit - 2 Piece Inspection/Pickup Kit Includes: PART # PMG01 & MR02

PART # TK2000

PART # TK6000

Tool Kit - 2 Piece Inspection/Pickup Kit Includes: PART # PMG01 & TF01

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

Tool Kit - 5 Piece Inspection/Pickup Kit Includes: • Aluminum Magnetic Pickup Tool with Pocket Clip • Dual Purpose Flex Shaft System • 3 lb. & 14 lb. Pickup Magnets • 2 Acrylic Mirrors (Parts # MR 02 & 03) • Acrylic 3X Magnifying Glass 1.75" x 2.5" • Carrying Case

East: 1-877-993-9968

121

TACTICAL & RIOT EQUIPMENT Tactical & Riot Equipment by SALIENT MANUFACTURING TACTICAL MIRRORS The Portable Detective™ Search Buddy Series from Salient Manufacturing offers innovative small tools to suite a variety of problem solving needs and retrieval situations. No job is too small for these rugged and versatile units. Whether the search criteria requires reflection, magnification or recovery, the Search Buddy’s

can conquer and eliminate obstacles. each Search Buddy has the unique feature of allowing it to be used individually or combined in several kits increasing the users flexibility for problem solving.

PART # MR01 Telescoping Pole 7.75" to 35.5" Acrylic Mirror 2.25" x 3.6" PART # MR02 Telescoping Pole 6.5" to 27.5" Acrylic Mirror 1.75" x 2.5" PART # MR03 Telescoping Pole 6.5" to 27.5" Acrylic Mirror 0.75" x 2.5"

PART # PL01(TOP) Telescoping Pole 7.5" to 27.5" 1.5 lb. Pickup Magnet with PART # GMR01 (BOTTOM) Pilot Lighter & Pen Clip Telescoping Pole 7" to 28.5" Glass Mirror 2.25" x 2.5" PART # MG05 (MIDDLE) Telescoping Pole 7" to 26.5" 2 lb. Pickup Magnet PART # PMG01 (TOP) Telescoping Pole 7.25" to 33" 14 lb. Pickup Magnet PART # PMG03 (BOTTOM) Telescoping Pole 7.5" to 32" PART # PMG02 (MIDDLE) 3 lb. Pickup Magnet Telescoping Pole 7.5" to 32" 14 lb. Swivel Head Pickup Magnet

PART # MR04 Telescoping Pole 6.5" to 27.5" Acrylic Mirror 4" x 6"

PART # SM317L Non flexible pole length of 10.5" Glass Mirror 2.5" x 3.5"

PART # SM317 Non flexible pole length of 10.5" Glass Mirror 1.75" x 3" PART # SM317S Non flexible pole length of 6" Glass Mirror 1.5" x 0.5" PART # SSMR01 Telescoping Pole 6.75" to 28.5" Stainless Steel Mirror 2" x 3.75" PART # TF01 Telescoping Pole 7" to 28" 3X Magnifier Glass 1.75" x 2.5" Mirror Dimension

PART # HMPSET1 Tool Kit - 5 piece Hook, Pick, Magnet Set with Quick Change System Includes: 4 Hooks & (1) 3 lb. Magnet PART # PM01B-M Telescoping Shaft to 25.5" Pen Size Tool with 1.5 lb. Magnet & Mirror on Telescoping Shaft Acrylic Mirror is 0.75" x 2.5" PART # FF01 Flexible Pole 23" Length 3X Magnifier Glass Mirror Dimension 1.75" x 2.5" PART # FMR01 Flexible Pole - Length 23" Acrylic Mirror 1.75" x 2.5" PART # FMR02 Flexible Pole - Length 23" Acrylic Mirror 2.25" x 3.6"

PART # MGMR01 Telescoping Pole 7" to 28" 3X Magnified Glass Mirror 2.25" x 2.5"

PART # FMR03 Flexible Pole - Length 23" Acrylic Mirror 0.75" x 2.5"

PART # PFM01 Flexible Pole - Length 23" 3 lb. Pickup Magnet PART # PFM02 Flexible Pole - Length 23" 14 lb. Pickup Magnet

INDOOR & OUTDOOR CONVEX MIRRORS Various Sizes Available

122

INDOOR & OUTDOOR HEMISPHERE MIRRORS Various Sizes Available 360 º, 180º, 90º Dimensions

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TACTICAL & RIOT EQUIPMENT Tactical & Riot Equipment by SALIENT MANUFACTURING TACTICAL MIRRORS THE PORTABLE DETECTIVE™ BY SALIENT MANUFACTURING CUSTOMIZATION AVAILABLE

SERIES 600

A high intensity halogen beam and detachable convex plexiglass mirror work together so the user’s field of vision in considerably increased. Series 1000 units come complete with a battery charger and a hook for multiple functions. Series 100, 500 and 600 units come complete with flashlight clip or hook depending on clients needs. Flat mirrors are available for all models.

Straight Extension Pole with rubber handle and arm rest for counter balance Length: Weight: Mirror:

36” collapsed; 75” extended 1.5 lb. 8” convex acrylic mirror

SERIES 50 Compact Pocket bendable pole with a mirror that also attaches to standard rifle barrels and expandable batons

Length: Weight: Mirror:

• Lightweight fiberglass telescoping extension pole with neoprene handle grip. • Extends to approx. 54 inches, collapses to 22 inches. • Weight: approximately 1.0lbs. • Complete with detachable 6” convex acrylic mirror – flat optional. • All mirror lenses are replaceable. • All units utilize parallel light & mirror placement for optimum field of view. • Options include 6 inch flat square mirror. • Internal pre-wiring to accommodate flashlights with cable/switch systems. • Detachable wheel assembly – optional • Flashlight clip accommodates 90% of light systems currently being used by law enforcement. other clips sizes are available to accommodate non-standard light systems.

7” collapsed; 16” extended 1 lb. 3” convex acrylic mirror

SERIES 100 Compact straight extension pole constructed of fiberglass/aluminum. Has optional suction cups for storage ease. Complete with flashlight clip or hook Length: Weight: Mirror:

SERIES 150

22” collapsed; 54” extended 1 lb. 6” convex acrylic mirror

SERIES 500 Straight Extension Pole with rubber grip Length: Weight: Mirror:

SERIES 10 The Series 10 has a full extension of 37” and will compact to approx. 8” for a carrying case. • • • • • •

Compact Pocket extendable pole Extends to approx. 37” compacts to 8” Complete with 3” round convex and flat acrylic mirror Compacts to approx 8” for a carrying case All mirror lenses are replaceable and interchangeable. Lightweight: approximately 0.5 lbs

Ideal for: • use in intermediate or small areas. • under vehicle inspections by military, customs, bomb technicians, law enforcement officers, corrections, tactical/eru. easily carried.

Ideal for • use in small areas. • military, police officers, corrections, tactical/eru. • easily carried.

36” collapsed; 75” extended 1.5 lb. 8” convex acrylic mirror

PORTABLE DECTECTIVE SERIES 85 PORTABLE DETECTIVE SERIES 75 CHARACTERISTICS Weight: Dimensions: Handle Length: Mirror Type: Mirror Replaceable: Lighting of Subject: Batteries: Battery Life: Bulb Type: Bulb Life: Housing: Housing Finish:

252 Grams 3" x 6" x .75" 20" Acrylic Yes Reflection Parallel with Mirror 1 AAA 5 hours 2 LED 10,000 hours min. Aluminum Anodized Black

Head Office: 1-866-652-2877

West: (604) 526-1631

The Series 75 is a compact pocket LED lighted mirror. With an optional belt clip

Prairies: 1-866-652-2877

East: 1-877-993-9968

SPECIFICATIONS • lightweight fiberglass non-telescopic pole. • length: 28 inches. • complete with 8” round, convex or flat mirror. • all mirror lenses are replaceable and interchangeable. • lightweight: approximately 1 lb. Ideal for under vehicle searching areas, military, police officers, corrections, customs and embassies. Easily carried.

123

TACTICAL & RIOT EQUIPMENT Tactical & Riot Equipment by SALIENT MANUFACTURING TACTICAL MIRRORS SERIES 3000N

SERIES 527

The Series 3000N is our wheeled under vehicle model. This model uses the same integral light source design as the 1000N Series. A high intensity halogen lamp and lightweight, streamlined battery case eliminates exposed wiring. Lightweight unit with low wheel base approx: 2”, for access under vehicles. Four multi directional caster wheels.

SERIES 526

The series 527 is a lightweight fiberglass telescoping pole comes complete with wheels.

The Series 526 is a lightweight fiberglass telescoping pole intended for under vehicle searching.

This lightweight fiberglass telescoping pole with wheels is intended for under vehicle searching.

This Lightweight fiberglass telescoping pole comes complete with following:

* * *

The Series 3000N model has a lightweight fiberglass extension pole with handle grip and arm rest. * Extends to approximately 70”, collapsed 36”. * Complete with detachable 12” round convex acrylic mirror - flat optional. * Light Source: 20 watt halogen lamp. * 4 multi directional caster wheels. * Low wheel base <2 1/2” for easy access under vehicles. * All mirror lenses are replaceable and interchangeable. * Lightweight approximately 5 1/2 lbs with wheels. Battery System Options: * NiMH rechargeable AA batteries or disposable alkaline AA batteries. * Includes a 110/220 volt universal charger. * European adapter plug available if required.

SERIES 1000N The Series 1000N is our under vehicle model. This model uses the same integral light source design as the 3000N Series. A high intensity halogen lamp and lightweight, streamlined battery case eliminates exposed wiring. Lightweight unit with low wheel base approx: 2”, for easy access under vehicles. Opional: 4 multi directional caster wheels.

* Extended 55”, collapsed 27”. * Complete with 8” convex acrylic mirror. * All mirror lenses are replaceable and interchangeable. * Multi angle mirror & permanent tension arm allows flexible mirror adjustment. * Flashlight clip for “D” cell flashlights. * Lightweight approximately 1 lbs.

* * * * *

Length: extended 55” collapsed to 27”. Complete with 8” convex acrylic mirror. All mirror lenses are replaceable and interchangeable. Multi angle mirror & permament tension arm allows flexible mirror adjustment. Flashlight Clip for “D” cell flashlights. Complete with 4 multi directional caster wheels. Low wheel base <2 1/2” for easy access under vehicles. Lightweight approximately 2.5 lbs. Intended for under vehicle searching for military, police officers, corrections, customs and embassy’s.

* Intended for under vehicle searching. * Military, police officers, corrections, customs and embassy’s.

SERIES 054

The Series 1000N model has a lightweight fiberglass extension pole with handle grip and arm rest.

The series 054 is a lightweight telesoping pole with wheels to be used as an under vehicle searching unit with flashlight clip for “D” cell flashlights.

* Extends to approximately 70”, collapsed 36”. * Complete with detachable 8” round convex acrylic - flat optional * Light Source: 20 watt halogen lamp. * Optional 4 multi directional caster wheels. * Low wheel base <2 1/2” for easy access under vehicles. * All mirror lenses are replaceable and interchangable. * Lightweight approximately 3.0 lbs without wheels, 5.0 lbs with wheels.

This lightweight telescoping pole is used for under vehicle searching. * Length: extended 63” collapsed 27”. * Complete with 12” convex acrylic mirror. * All mirror lenses are replaceable and interchangeable. * Multi angle mirror & permament tension arm allows flexible mirror adjustment. * Flashlight clip for “D” cell flashlights. * 4 multi directional caster wheels. * Low wheel base <2 1/2” for easy access under vehicle. * Lightweight approximately 3.5 lbs.

Battery System Options: * NiMH rechargeable AA batteries or disposable alkaline AA batteries. * Includes a 110/220 volt universal charger. * European adapter plug available if required.

Intended for under vehicle searching, military, police officers, corrections, customs and embassies.

Ideal for * Under vehicle inspections of trucks or vans. * Ideal for corrections, tactical/eru, embassy’s. SERIES 1200/1200RC

Series 1200/1200RC pole camera is an affordable and compact, telescopic video system designed for applications where temporary, flexible monitoring is required. Either non rechargeable Lithium or rechargeable NiMH are available. The Series 1200 Pole Camera has a detachable monitor with a Velcro hand strap, either non rechargeable Lithium or a rechargeable NiMH pack. The day-color/night clean image CCD camera automatically adjusts for daylight and ambient light source conditions. Extension cable allows for remote video surveillance and a standard video out jack enables the user to record video for evidence purposes. Retractable ceiling Tile Ram Bar gives added versatility to the user by lifting ceiling tiles so the camera angle remains in a static position. The lightweight fiberglass telescoping extension pole enables a 5.5 ft person to view approximately a height of 12 feet. Run time on fully charged batteries is approximately 4 hours. * Monitor: 4.0” LCD Color Thin Film Transistor Monitor * Video Camera: 1/4” Color/Day?Night Waterproof Camera with IR LED’s * Probe Length: Collapsed 3 feet, Extension to 6.5 Feet * Shipping Case: Storm 3100 Black rugged storage case with wheels * Weight: Aproxiamtely 7 lbs

124

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TACTICAL & RIOT EQUIPMENT Tactical & Riot Equipment by MAX PRO POLICE & ARMOR PROTECTIVE HEAD GEAR

MC-2005 VENTILATED MOTORCYCLE HELMET

MEASURING THE HEAD TO DETERMINE THE CORRECT BELL HELMET SIZE

SHELL The three-quarter coverage shell is constructed of aircraft quality, light weight thermoset pre-impregnated fiber composite utilizing high pressure molding for increased strength while maintaining the lightest weight possible. Shell edges are finished trim of injection molded neoprene rubber material black in color. Shell is to be manufactured to accept standard fixed patent leather visor. Complete helmet not to exceed 2 lbs. 12 ounces.

Measuring the head is the starting point for determining your correct helmet size. Use a cloth measuring tape. Determining your correct helmet size begins with measuring the circumference of your head. This measurement should be taken at a point approximately one inch above the eyebrows in the front and at the point on the back of the head that results in the largest possible measurement. Several measurements should be taken to be sure that the largest one has been obtained.

LINER The inner liner (EPS) to be a 35-40 mm variable thickness liner constructed of a “breathable expanded polystrene” providing maximum cooling and comfort to the wearer. This material is manufactured in such a way that, when installed in the above outer shell, it will attenuate the energy of an impact no less than the Snell 2005 Safety Test Certification.

GD-700 GENERAL DUTY/TACTICAL HELMET SHELL The half-coverage shell is constructed of Arimid Fiber Reinforced Thermo Plastic Composite utilizing high pressure compression molding for increased strength while maintaining a light weight helmet. The visor is an integral part of the shell. The shell edge is finished with a tough molded trim. Shell shall be painted to department specifications. Complete helmet with shield shall not exceed 2.8 lbs.

VENTILATION SYSTEM Cooling air is pulled into the helmet as the officer rides through a forehead vent and the ventilation is completed by hot air being exhausted through the interior comfort pad and the breathable expanded polystrene out the rear air exhaust ducts.

GD-700 GENERAL DUTY/TACTICAL HELMET

LINER The impact liner is constructed of expanded polystyrene (EPS). Liner will have a minimum thickness of 3/4” in test plane area to provide maximum impact energy attenuation. The EPS liner is covered by a vented brush nylon material that is bonded to a multi-density foam for comfort and durability. This material provides maximum wicking of perspiration away from the user’s head to allow for the most cooling to the wearer.

SHELL The half-coverage shell is constructed of Arimid Fiber Reinforced Thermo Plastic Composite utilizing high pressure compression molding for increased strength while maintaining a light weight helmet. The visor is an integral part of the shell. The shell edge is finished with a tough molded trim. Shell shall be painted to department specifications. Complete helmet with shield shall not exceed 2.8 lbs.

TACTICAL FACE SHIELD (OPTIONAL ACCESSORY) The GD-700 is specially designed to accept an integral 6” tactical face shield made of clear Lexan material with a liquid seal (Part No. TA-92). The liquid seal is affixed so to prevent a passage of liquids from the helmet dome face shield onto the inner shield surface when shield is in down position. Shield mounts directly to helmet using a shield hardware system (Hardware Part No. TA-922-HDW). The shield mounting system is designed and affixed to be mounted to the helmet with metal screws and shield to install to mounting blocks with a thumbscrew for hand adjustment that will lock shield in desired position. Shield hardware is designed for maximum shear strength. The mounting position is designed to accommodate most gas masks behind shield when in down position.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

SIZES Size Range 6 3/4” to 8 1/8”. Order by S/M 6 3/4”-7 1/4”, L/XL 7 3/8”-7 7/8”, and XXL 8”-8 1/8”. Two self adhesive sizing strips will be included with each helmet for sizing adjustment within a shell range. TACTICAL FACE SHIELD (OPTIONAL ACCESSORY) The GD-700 is specially designed to accept an integral 6” tactical face shield made of clear Lexan material with a liquid seal (Part No. TA-92). The liquid seal is affixed so to prevent a passage of liquids from the helmet dome face shield onto the inner shield surface when shield is in down position. Shield mounts directly to helmet using a shield hardware system (Hardware Part No. TA-922-HDW). The shield mounting system is designed and affixed to be mounted to the helmet with metal screws and shield to install to mounting blocks with a thumbscrew for hand adjustment that will lock shield in desired position. Shield hardware is designed for maximum shear strength. The mounting position is designed to accommodate most gas masks behind shield when in down position.

125

TACTICAL & RIOT EQUIPMENT Tactical & Riot Equipment by MAX PRO POLICE & ARMOR PROTECTIVE HEAD GEAR SD-600 AND SD-600V (VENTED) MOTORCYCLE/TACTICAL HELMET SHELL The shell is constructed of high density Tenntex Thermo Plastic Composite utilizing high pressure compression molding for increased strength while maintaining a lightweight helmet. Shell edge is a finished trim made of steel core extruded neoprene rubber. Shell is manufactured to accept standard snap-on visor or fixed black patent visor. Complete helmet is not to exceed 2 pounds 6 ounces. LINER The impact liner is constructed of expanded polystyrene (EPS). Liner has a minimum thickness of 3/4” in test plane area to provide maximum impact energy attenuation. VENTILATION SYSTEM The SD-600V helmet features a ventilation system that introduces cooling air into inner fit pad area through adjustable forehand venting. The vents may be closed for cold weather use. The fit pad is removable for hand washing. The vented brushed nylon material of the fit pad will provide comfort and maximum wicking of perspiration away from the user’s head to allow maximum cooling. SIZING SYSTEM Size range: 6 3/4” to 8 1/8”. The interior fit pad, a standard motorcycle style, is sized XS 6 3/4” - 6 7/8”, Small 7”-7 1/8”, Medium 7 1/4”, Large 7 3/8”-7 1/2”, XL 7 5/8”-7 7/8”, XXL 8”-8 1/8”.

RD-1002X RIOT HELMET SHELL The half-coverage shell is constructed of Tenntex Thermo Composite utilizing high pressure compression molding for increased strength while maintaining a light weight helmet. The shell edge is finished with a tough molded trim. Shell will be painted with a scratch resistant flat black paint. Complete helmet with shield will not exceed 2 lbs. 3 oz. LINER The liner is constructed of energy absorbing expanded polystyrene (EPS) at least 3/4” in all impact areas. A comfortable, cool, maximum perspiration absorbing fit pad is installed over the EPS liner. SIZING SYSTEM Size Range: 6 3/4” to 8 1/8”. Order by S/M 6 3/4”-7 1/4”, L/XL 7 3/8”-7 7/8”, XXL 8”-8 1/8”. Two self-adhesive sizing strips are included with each helmet for sizing adjustment within a shell range. FACE SHIELD Helmet is supplied with a 6 1/2” full-flip polycarbonate face shield, .125” thick, with a clear, optical grade finish. The liquid seal is molded TPE material, black and semi-rigid. The liquid seal is affixed to prevent passage of liquids from the helmet dome or face shield into the inner shield surface when the shield is in down position. The face shield will mount directly to the helmet using standard mounting blocks. Face shield installed to mounting blocks with the use of thumb screws that lock the shield in desired position.

RD-TAC RIOT HELMET SHELL The half-coverage shell is constructed of Arimid Fiber Reinforced Thermoplastic composite utilizing high pressure compression molding for increased strength while maintaining a light weight helmet. The visor will be an integral part of the shell. The shell edge will be finished with a tough molded trim. Shell will be painted with a scratch resistant flat black paint. Complete helmet with shield will not exceed 3 lbs. LINER The liner is constructed of energy absorbing expanded polystyrene (EPS) at least 3/4” in all impact areas. The EPS liner is covered by a vented brushed nylon material that is bonded to multi-density foam for comfort and durability. This material will provide maximum wicking of perspiration away from the user’s head to allow for utmost cooling to the wearer. SIZING SYSTEM Order by shell size: S/M 6 3/4”-7 1/4”, L/XL 7 3/8”-7 7/8”, XXL 8”-8 1/8”. Two self adhesive sizing strips will be included with each helmet for sizing adjustment within a shell range. FACE SHIELD Helmet is supplied with a 6 1/2” full-flip polycarbonate face shield, .125” thick, with a clear, optical grade finish. The liquid seal is molded TPE material, black and semi-rigid. The liquid seal is affixed to prevent passage of liquids from the helmet dome or face shield into the inner shield surface when the shield is in down position. The face shield will mount directly to the helmet using standard mounting blocks. Face shield installed to mounting blocks with the use of thumb screws that lock the shield in desired position.

126

Head Office: 1-866-652-2877

FC-210 FULL-FACE MODULAR CORRECTIONAL HELMET SHELL The full-face/full coverage shell is constructed of lightweight composite material. The shell features an adjustable, six position ratchet anti-fog face shield. The shell design incorporates a modular jaw piece that can be raised with a push of a button that is located under the chin edge of the helmet. The jaw piece can be safely opened or closed with one hand and locks in place. Cool stream flow-through ventilation to the helmet’s interior is accomplished by open/close slide vents at forehead and chin. Weight approximately 3.5 lbs. Color available: Gloss Black. LINER The impact liner is constructed of expanded polystyrene foam to provide maximum impact energy attenuation. SIZING SYSTEM Sizes: XS 6 3/4”-6 7/8”, Small 7”-7 1/8”, Medium 7 1/4”, Large 7 3/8”-7 1/2”, XL 7 7/8”. Interior fit pad and padded neck roll is constructed of closed cell foam covered with terry velour interior. TACTICAL FACE SHIELD WITH GUARD GRID Face shield material is clear, optical grade Lexan material. Shield may be easily changed, if necessary. Guard grid is designed to give added protection to an officer’s facial area. Grid is manufactured of #9 gauge steel, electrostatic power coated black in color. Guard grid is drilled and attached to face shield securely by four screws.

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TACTICAL & RIOT EQUIPMENT Tactical & Riot Equipment by MAX PRO POLICE & ARMOR PROTECTIVE HEAD GEAR

CT-100 TACTICAL/CORRECTIONAL HELMET WITH SHIELD AND GRID

RS-100 RIOT/TACTICAL HELMET SHELL The three-quarter coverage shell is constructed of high density Tenntex Thermo Composite utilizing high pressure injection compression molding for increased strength while maintaining a lightweight helmet, shell edge has a finished trim made of steel core extruded neoprene rubber. Visor is an integral molded part of the shell. Back edge of shell is tapered outward to allow positioning of shoulder weapon in prone position. Helmet sides flare to accommodate double canister gas masks behind face shield. Most current gas masks can be used with this helmet. Shell will be painted with a scratch resistant flat black paint. Complete helmet will not exceed 3 lbs. including shield. LINER The impact liner is constructed of expanded polystyrene (EPS). The liner will have a minimum thickness of 3/4” in test plane area to provide maximum impact energy attenuation. Two EPS liner sizes shall be available to offer optimum comfort and appearance. The EPS liner is completely covered by a vented brush nylon material that is bonded to a multi-density foam for comfort and durability. This material provides maximum wicking of perspiration away from the user’s head to allow for the most cooling to the wearer. SIZES Size Range 6 3/4” to 8 1/8”. Order by S/M 6 3/4”-7 1/4”, L/XL 7 3/8”-7 7/8”, and XXL 8”-8 1/8”. Two self adhesive sizing strips will be included with each helmet for sizing adjustment within a shell range. RIOT SHIELD The face shield is constructed of high impact transparent material with a clear, optical grade finish. Measurements of face shield are 7” x 18” with a .125 thickness. The liquid seal is a molded TPE material, black and semi-rigid affixed to prevent a passage of liquids from the helmet dome or face shield onto the inner shield surface when the shield is in the down position. Tactical face shield is mounted directly using standard mounting blocks. The shield mounting system to be designed and affixed to be integral to the shield, remaining in place when shield is removed from the helmet. Shield blocks will mount to the helmet with rivets and shield to install mounting blocks with thumbscrew that will lock the shield in desired position. Both are designed for maximum shear strength. Shield mount is designed to accommodate most gas masks behind shield when in down position.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

SHELL The three-quarter coverage shell is constructed of high density Tenntex Thermo Composite utilizing high pressure injection compression molding for increased strength while keeping a lightweight helmet, Shell edge will have a finished trim made of steel core extruded neoprene rubber. Visor will be an integral molded part of the shell. Back edge of shell will be tapered outward to allow positioning of shoulder weapon in prone position. Helmet sides flare to accommodate double canister gas masks behind face shields. Most current gas masks can be used with this helmet. Shell will be painted with a scratch resistant flat black paint. Complete helmet will not be more than 3 lbs. 5 oz. Fully equipped including the shield grid. LINER The impact liner is constructed of expanded polystyrene (EPS). The liner will have a minimum thickness of 3/4” in test plane area to provide maximum impact energy attenuation. Two EPS liner sizes will be available to offer optimum comfort and appearance. SIZES Size Range 6 3/4” to 8 1/8”. Order by S/M 6 3/4”-7 1/4”, L/XL 7 3/8”-7 7/8”, and XXL 8”-8 1/8”. The EPS liner will be completely covered by a vented brush nylon material that is bonded to a multi-density foam for comfort and durability. This material will provide maximum wicking of perspiration away from the user’s head to allow for the most cooling to the wearer. Two self adhesive sizing strips will be included with each helmet for sizing adjustment within a shell range. RETENTION SYSTEM The retention system includes a two point attachment harness. The chinstrap will be equipped with a quick release buckle (all metal working parts) for secure fastening that meets or exceeds industry standards. The quick release buckle allows fast entrance and exit to helmet even when user is wearing gloves. RIOT SHIELD The face shield is constructed of high impact transparent material with a clear, optical grade finish. Measurements of face shield to be 7” x 18” with a .125 thickness. The liquid seal is a molded TPE material, black and semi-rigid affixed to prevent a passage of liquids from the helmet dome or face shield onto the inner shield surface when the shield is in the down position. Tactical face shield is mounted directly using standard mounting blocks. The shield mounting system to be designed and affixed to be integral to the shield, remaining in place when shield is removed from the helmet. Shield blocks will mount to the helmet with rivets and shield to install mounting blocks with thumbscrew that will lock the shield in desired position. Both are designed for maximum shear strength. Shield mount is designed to accommodate most gas masks behind shield when in down position. Guard grid to be manufactured of #9 gauge steel, black electrostatic powder coated. Dimensions: 6.5” high x 15” wide. Guard grid drilled and attached to face shield is designed to give added protection of officer’s face. STANDARDS Meets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).

127

TACTICAL & RIOT EQUIPMENT Tactical & Riot Equipment by RBR BALLISTIC HEAD GEAR MKIII COMBAT HELMET

MKIV BOLT FREE

The MKIII general purpose Combat Helmet is the first choice for military, police, tactical teams and journalists. It is lightweight, Rugged and Comfortable. It uses the unique combination of high performance anti-ballistic Aramid together with RBR's formula resin systems and unique production processing technology. It has tested to NIJ level IIIA 9mm and 44 magnum performance The Mk III is a class leader with an excellent V50 performance to weight ratio.

This unique Patented design allows the fixing of the liner and harness strap to the helmet without the need to drill the helmet shell. Therefore, the strength integrity is undiminished and affords extra anti-ballistic performance. The MK IV is lightweight, rugged and highly comfortable. The harness webbing straps are tested to extreme levels. Electrical and thermal conductivity is dramatically reduced.

• • • • •

Compatible with Respirators, Chemical Hoods, Weapon Sights, NVGs and Thermal Imagers High Impact Trauma Protection to EN 397 Fully Adjustable Harness System 3 Point Retention System High Performance

3 Point Retention System Fully Adjustable Harness System Harness Replacement Without Tools Impact Trauma Protection to EN397 Compatible with Ear Defenders & Communications Headsets, Weapon Vehicle Sights, NVGs and Thermal Imagers

PARATROOP MKV

MKI POLICE

The Paratroop is a variant of the Combat helmet, designed to meet the requirement of airborne forces. The liner and harness system have been upgraded from the Combat to improve shock attenuation and impact resistance. The harness gives secure fixing and maximum neck support - allows adjustment to the crown, headband and chinstrap so the optimum gap between helmet shell and head is maintained. Available at various levels of protection.

A unique production technique allows the design of RBR's Police MK I helmet to exploit fully the possibility of using "re-entry" shapes and give unsurpassed protective coverage including the sides of the head and neck. When fitted with an RBR Ballistic Visor the head is fully and comfortably enclosed in a tough protective shell. This lightweight & rugged helmet can be fitted with a communications headset to further extend its mission capability.

• • • •

• • • • • • •

Good Aerodynamic Profile Harness Replacement Without Tools Impact Trauma Protection to EN966 Compatible with Respirators, Chemical Hoods, Weapon Sights, NVGs and Thermal Imagers

Hygienic, Quick Release Chinstrap Harness Assembly Compatible with Communication Headset Deep Sides of Head & Neck Protection Excellent Anti-Ballistic Performance Low Maintenance- Wipe Clean Surface & Quick Release Full Adjustable Harness Low Centre Of Gravity

39 IO

IIIA

HA R

NE S

RE T

VI SO R

ST AN

SI ZE

DA RD

NI J

RP T

BS O

BR H

CK A

TIC IS

SH O

LL BA

LS LE VE N EN TA TIO AG M F1

7 SN AP S CA & MO OPT VI IO UF SO N LA S NE RS GE CK CO PR CO VE O MM TE RS UN CTI O IC EA N A R DE TIO N S HE FEN DE LM RS ET LIG BA H GS TS

RBR PRODUCT SELECTION MATRIX

MK III COMBAT MK IV BOLT FREE MK V PARATROOP MK I POLICE

128

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TACTICAL & RIOT EQUIPMENT

Tactical & Riot Equipment by SEELER EXOTHERMIC CUTTING TORCH BU-001 EXOTHERMIC EMERGENCY CUTTING UNIT The SEELER ENTERPRISES EXOTHERMIC EMERGENCY CUTTING UNIT is a tactical unit's tool for quick, silent, and effective entry through steel obstacles. It can be utilized to disable a vehicle, cut through ducts for alternate access, or to port metal doors or walls for deployment of gas or diversion devices, observation, or gun port coverage of the crisis point or entry team. It cuts high tensile steel in a time frame unparalleled by any conventional equipment; steel-barred doors or windows can be opened in a matter of seconds. Small, lightweight and very portable, SEELER ENTERPRISES EXOTHERMIC EMERGENCY CUTTING UNIT is perfectly adaptable to rappeling, swimming, and jumping parachuting. The Exothermic Cable causes much less damage, is quieter, and safer than explosive entry techniques. This device's silence makes it perfectly suited to covert or stealth entries. The SEELER ENTERPRISES EXOTHERMIC EMERGENCY CUTTING UNIT can be used by personnel with little or no training and is virtually maintenance-free. Normally, the only after-purchase replacement items would be the self-consuming torch (Exothermic Cable), and oxygen consumed.

TECHNICAL DATA Nomenclature: Approximate Weight: Stock No.: Cost: Cutting Time: Cable Burn Rate: Cable Cost: Oxygen Capacity:

S.E.I. Lightweight Emergency Cutting Unit Shipping Weight 50 lbs.; Operational Weight 19 lbs. BU-001 P.O.R. 6 minutes with fully charged bottle;longer with practice. Maximum 2 ft. per minute. P.O.R. 22 cubic feet.

Components: Storage Box One 22 cubic foot oxygen bottle, maximum PSI for cutting purposes 22 15 lbs. A constant flow regulator preset at 310 PSI (3.5 cu. ft. of oxygen per min.) with an on/off ball valve requiring only a quarter turn. One 5 ft. stainless steel charging whip with one pressure gauge and yoke for checking bottle pressure. One 5 ft. stainless steel whip L.P. with tghumb activated deadman (cable to bottle). Two "BSP" hansen fittings (cable to L.P. whip). Four pads "0000" steel wool. One knife. One roll of tape. One 9 volt battery. One stainless steel belt hook for carrying unit on a Garrison type belt. One pair of dark sunglasses. One 25 ft. roll of 6mm Exothermic Cable.

• • • • • • • • • • • •

Product # SLBU001

SEELER ENTERPRISES REPLACEMENT EXOTHERMIC CABLE SEI Exothermic Cable makes this technology safer, simpler and user friendly. SEI Exothermic Cable is designed to burn at 4000 degrees centigrade, thus creating a minimal amount of explosive gases and is at the very bottom of the ultraviolet range. (i.e. can be used without any UV protection, above or below the water). SEI designed its Exothermic Cable as a flexible torch made of a 6 x 19 coreless mild steel wire, extruded in a polypropylene coating which allows oxygen to be blown through the center of the wire. Burns at consumption rate of approximately two (2) feet per minute and will continue to burn until the oxygen is turned off. SEI Exothermic Cable is supplied in 6mm (5/16 “) at 50 foot lengths. Each roll is equipped with a 1/4” npt female end fitting on both ends, which allow the user to cut the cable roll in half, using 1/2 at a time or cut an end fitting off and use the entire length, resulting in a continuous cutting of up 25 minutes. 6 mm 9 mm 12 mm

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

50' Roll 50' Roll 100' Roll

Product # SLBU001 Product # SL9MM Product # SL12MM

129

TACTICAL & RIOT EQUIPMENT Tactical & Riot Equipment by ZAK TOOLS

ENTRY TOOL ZT4230

during use. • Heat treated Stainless steel head • Lightweight sure-grip handle • Full Lifetime Guarantee • Unique Hammer Head Feature for battering or use as a flat wedge impact point • Pry foot has a high arch fulcrum point for increased lifting & prying force. • Sizes: 30”, 36”, 42” • Finishes in Black and Bright

The Tactical Entry Tool was designed for use by law enforcement and fire/rescue personnel for accomplishing forcible entry into buildings, vehicles and other locked enclosures. The working ends of the tool will perform a diversity of tasks including prying, pounding, and puncturing the tubular steel handle reduces the overall weight while enhancing leverage, control and balance

Tactical & Riot Equipment by B-SAFE INDUSTRIES ENTRY TOOLS THE SUPRAM-IT

THE SUPRAM-IT

THE BASIC

• • • •

• • • • •

35 lbs., 30" (nom.) - 1 person ram Impacts with 19,000 lbs. kinetic force Large "sweet spot" for easy targeting Short backswing in close quarters

Product # ABSE501-35 w/sling

50 lbs., 40" (nom.) - 1 or 2 person ram Impacts with 26,000 lbs. kinetic force Pinpoint balanced for full control More powerful than "ordinary" rams

Product # ABSE503-50 w/sling

ABSE501-35 ABSE504-HD ABSE520-30 ABSE520-02 ABSE516-10

ALL PURPOSE KIT SupRam-It Heavy Duty Sling Super Go-Bar, 30" Quick Slip Sling Power Sledge

• •

ABSE517-04 ABSE523-15

Handi-Sledge Pry-It Bar, 15"

Product # ABSSSEK/AP

Product # ABSSAEK-01

THE POPULAR

• • • • • •

ABSE501-35 ABSE504-HD ABSE520-30 ABSE520-02 ABSE516-10 ABSE540-27

SupRam-It Heavy Duty Sling Super Go-Bar, 30" Quick Slip Sling Power Sledge Super Snip-It, 27.5"

THE HEAVY DUTY

• • • • • • •

Product # ABSSAEK-02

ABSE501-35 ABSE504-HD ABSE520-30 ABSE520-02 ABSE516-10 ABSE505-18

SupRam-It Heavy Duty Sling Super Go-Bar, 30" Quick Slip Sling Power Sledge Duckbill Breaker

Product # ABSSAEK-02A

SupRam-It II Heavy Duty Sling Power Sledge Super Snip-It, 35.5" 2-in-1 Go-Bar, 20" Super Go-Bar, 30" Quick Slip Sling

Product # ABSSAEK-04

THE ALTERNATE CHOICE

• • • • • •

ABSE503-50 ABSE504-HD ABSE516-10 ABSE541-35 ABSE524-20 ABSE520-30 ABSE520-02

THE RAM-IT PLUS

• • • •

35 lbs., 30" (nom.) - 1 person ram Impacts with 14,000 lbs. kinetic force No recoil, dead-blow type ram Highly effective at budget prices

Product # ABSE500-35

BOLT CUTTERS THE VERSATILE

• • • • • •

ABSE501-35 ABSE504-HD ABSE520-30 ABSE520-02 ABSE516-10 ABSE524-20

SupRam-It Heavy Duty Sling Super Go-Bar, 30" Quick Slip Sling Power Sledge 2-in-1 Go-Bar, 20"

DYNAMIC DUO

• •

ABSE505-18 ABSE516-10

Duckbill Breaker Power Sledge

Product # ABSSSEK/DD

• • •

Extra high strength chrome alloy steel Triangular super cutter blades (E545-03), simply rotate for new cutting edge Super powerful cam action for added leverage

ABSE540-27 ABSE541-35 ABSE542-43

27.5" 35.5" 43.5"

7.5 lbs. 12.75 lbs. 16 lbs.

3/8" Bolts 1/2" Bolts 9/16" Bolts

1/2" Thread 9/16" Thread 9/16" Thread

Product # ABSSAEK-03

130

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TACTICAL & RIOT EQUIPMENT

Tactical & Riot Equipment by B-SAFE INDUSTRIES ENTRY TOOLS

• • • • • • • •

30" in length Three flat strike surfaces Shouldered forked end increases pry power by almost double One piece cast, graphited metal Working edges easily sharpened Opens auto trunks and doors, lifts paneling and floorboards Multi-purpose hooligan type for forced entry Built-in Sling Loop to accept ABSE520-02 (supplied)

Product # ABSE520-30 Product # ABSY520-30

Shouldered forked end increases pry power by almost a third

• • •

QUICK SLIP SLING (FOR ABSE520-30)

• • •

BLACK YELLOW

2-IN-1 GO BAR, 20" KIT

• • • • • • •

POWER SLEDGE 10

Head has 3 flat strike surfaces.

SUPER GO-BAR, 30"

Product # ABSE-516-10

Makes a shoulder carry easy and leaves hands free Black nylon web strap slips on and off easily Velcro fasteners

Product # ABSE520-02

POWER SLEDGE 16

•

E517-04 HANDI-SLEDGE

DUCKBILL BREAKER

• •

Same as the ABSE516-10 but with 16 lb. head

Product # ABSE516-16

•

20" in length Shouldered forked end increases pry power by almost double Multipurpose hooligan type tool kit Three flat strike surfaces for accuracy and safety "A" type lock puller plus prong horn "Shove-It" knife to "pop" spring latches Thru-the-lock facilitator tool

10 lb. drop forged head Unbreakable, black fiberglass handle Textured sure-grip

4 lb. drop forged head and hardwood handle

Product # ABSE517-04

Padded handle Gas shut-off, ram knob tip

Product # ABSE505-18

2-IN-1 GO-BAR, 20 KIT

Product # ABSE524-20

• •

E523-15 PRY-IT BAR, 15"

BUS ENTRY KIT

• •

ABSE517-04 ABSE518-12

Handi-Sledge Forkhead Breaker

• • •

ABSE517-04 ABSE524-20

Handi-Sledge 2-in-1 Kit

Product # ABSSSEK/P

Versatile, multipurpose, utility pry bar with nail pullers Extra heavy, drop forged steel Budget priced

Product # ABSE523-15

Product # ABSSSEK/B

JAMBS & JAMB SPREADERS OMNI® JAMB SPREADER

HYDRA-FORCE IV

• • •

Lightweight - only 9 lbs. Only 15" long, and 4" wide Powerful 8,000 psi

• • •

One piece, direct drive, no hose Stainless steel construction One person operation

Product # ABSF804-02

• • • • • • • • •

Enhanced series OMNI® with "beefed-up" end pads, telescoping pipe, plus multi-plate clutch More conveniently shaped handle Custom, black Cordura nylon carrying case with twin handles and sling - E-Z open, E-Z close velcro end flap Includes ABSE540-05 "Shove-It" shove knife to manipulate spring latches Over three (3) tons of horizontal force Virtually noiseless operation Lightweight - only 17 lbs. Instantly adjustable - 26" to 46" Fits most single, swing-in doors

Product # ABSF821-03

WEDGES THE SWEGE

• • • • • • • •

ABSL401-02 AND ABSL400-04

Like no simple wedge ever made, the Swege has unique, patented design features that prevent doors from being opened behind you unless you release them Compressible stainless steel spring top plate secures the "fit" and holds the door closed Reusable stay-put adhesive pad "clings" to hard surfaces Basic fiberhook bottom plate grabs carpeted surfaces High door adapter and carry sack included with the ABSL400-04 Fits into pocket or into its own carry bag (for ABSL400-04)) Available individually and in money-saving budget packs Comes with manufacturer's 5-year replacement warranty

ABSL401-02 Compact Size: 31⁄4" L x 21⁄4" W x 13⁄4" H; weighs only 21⁄2 ounces ABSL400-04 Standard Size: 51⁄2" L x 21⁄4" W x 23⁄4" H; weighs only 12 ounces

Head Office: 1-866-652-2877

West: (604) 526-1631

THE WEDGE

• • •

Double sided, most effective when used in pairs Unbreakable plastic wedge to facilitate the use of the E545-30 "Slip-It" or other car opening tool Compresses weather strip at the base of door window and increases sight line to linkage

Product # ABSL446-02

Prairies: 1-866-652-2877

East: 1-877-993-9968

131

TACTICAL & RIOT EQUIPMENT

Tactical & Riot Equipment by AETCO SHIELDS

RIOT SHIELD The basic riot shield provides maximum protection with the least amount of weight. The Polycarbonate materioal used for the shield is shatter-proof while defending the user against rocks, bottles and other thrown objects. Polycarbonate also provides a clear unobstructed view.

CONTAINMENT SHIELD This shield feartures a larger shield area, reverse curve and two large fixed handles (Aluminum or Plastic, Rubber installed grips). The design of this shield allows for suspect control in addition to having a riot shield. The containment shield is excellent for crowd control or for inmate containment. The large handles allow for two officers to use their combined force for control or containment if necessary. Five inch decals with white letters on black background.

The handle and adjustable arm strap are securely bolted to the riot shield. The handle provides a positive firm grip in any postion. Tough, clear polycarbonate shild, .177 inches thick. Adjustable Velcro arm strap for easy adjustment. Shock absorbing foam pad protects users forearm. Five inch decals with white letters on black background. Optional Riot Baton Holder. Weight: Dimensions: Visibility:

6 lbs. Fully assembled Height 35" x Width 20" Up to 88% light transmission

Tough, clear polycarbonate shield, .177 inches thick. Adjustable Velcro arm strap for easy adjustment.

DECALS AVAILABLE: POLICE SHERIFF CORRECTIONS

Weight: Dimensions: Visibility:

6.5 lbs. Fully assembled Height 48" x width 24" Up to 88% light transmission

(Custom Requests Available)

Tactical & Riot Equipment by ABLE 2 MEGAPHONE MEGAPHONES

AAB19.0155

Be heard in any crowd. Pistol grip megaphone with trigger switch for one-hand operation. Both models have excellent clear voice, an acoustic range of 3/4 to 1 mile and a rated power output of 15 watts (20 watt maximum). Eight "C" dry cell batteries power the dynamic microphone and siren or whistle sound. 14-1/2" long with a 9" diameter bell and weighs a mere 3.5 lbs. without the batteries.

Hand Grip Megaphone with built-in Siren for alarm purposes. Can be used as an ordinary megaphone or a siren alarm alternately during emergency situations. Batteries not included. AAB19.0156 Hand Grip Megaphone with built-in Whistle Signal Generator (sounds like a referee's whistle). Useful when training students, cadets or team players. Batteries not included.

Tactical & Riot Equipment by MDC NYLON TACTICAL VESTS TACTICAL TEAR GAS VEST By Charlton Custom Nylon • Breathable poly cotton • Rugged fabric & comfortable fit • Adjustable back • Velcro front closure • Elastic closure on pockets CNWVEST

NYLON LOAD BEARING VEST By Charlton Custom Nylon • Breathable poly cotton • Rugged fabric & comfortable fit • Adjustable sides & centre back by velcro draw closure • Hard wearing nylon packcloth for pockets • Specialty pockets for secure placement of all items CNWVEST-11

SLEEVES KEVLAR® CUT RESISTANT SLEEVES

• • • •

Double layer 100% Kevlar® knit sleeves Superior wrist and forearm protection from dangerous sharp edged weapons Flash and heat resistant. (With these sleeves and the cut resistant glove styles you'll have full protection for your forearm) Allows for flexible arm movement

AH1KS16 small & med - 16" AH1KS19 large & x-large - 19" Sold and packaged in pairs only.

132

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK!® MICROPHONE CARRIER FOR EPAULET • Snaps around epaulet of uniform shirt • Positions microphone for easy, one-handed operation • Versatile…offers snap, Nylon pile loop and Delrin® loop for attaching microphone 44A455BK

SILENT KEY HOLDER

LIGHT/BATON HOLDER (D CELL & C CELL)

RADIO CASE

Larger flaps to hold more keys. Keeps keys silent to prevent unwanted noise. 44A600BK-GSA

Holds D and C-Cell Flashlights and Straight Batons.

Fits standard Motorola® radio. Swivel belt loop allows removal of radio pouch without unfastening belt. 44A400BK-GSA

44A201BK-GSA

CHEM AGENT - LARGE (MK4) Holds MK4 size chemical agent canister. 44A501BK-GSA

CHEM AGENT - MEDIUM (MK3) Holds MK3 size chemical agent canister. 44A500BK-GSA

LATEX GLOVE CASES SINGLE 44A350BK 44A351BK DOUBLE

BLACKHAWK!® DEMONSTRATOR WEAPONS For all of those in need of a replica weapon that is the exact size of the real pistol, BLACKHAWK! Law Enforcement brings you the BLACKHAWK! Demonstrator weapons. Now you can work with and demonstrate holsters and other pistol accessories with a weapon that is the same size as the real pistol, unlike many other replicas on the market. Glock 17/22/31 sized weapon in Grey 44DGGL17GY 44DGGL17OR Glock 17/22/31 sized weapon in Safety Orange Beretta 92/96 sized weapon in Grey 44DGB92FGY Beretta 92/96 sized weapon in Safety Orange 44DGB92FOR 44DGSWJFGY S&W J-Frame sized weapon in Grey 44DGSWJFOR S&W J-Frame sized weapon in Orange Colt 1911 sized weapon in Grey 44DG1911GY 44DG1911OR Colt 1911 sized weapon in Safety Orange Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

INJECTION MOLDED OF A SUPER STRENGTH GLASS FILLED POLYMER, THESE REPLICAS WILL GIVE YOU YEARS OF SERVICE.

East: 1-877-993-9968

133

BLACKHAWK!

Gear & Products by BLACKHAWK!®

DUTY GEAR DOUBLE MAG POUCH STAGGERED COLUMN Fits most metal or polymer double stack 9mm/.45 cal magazines. Except GLOCK 20/21 and H&K .45 USP Magazines. 44A001BK-GSA

DUTY GEAR DOUBLE MAG POUCH SINGLE COLUMN Fits most single stack 9mm/.40 cal./ .45 cal. magazines.

DUTY GEAR DOUBLE MAG POUCH STAGGERED COLUMN -GLOCK 21

44A000BK-GSA

44A002BK-GSA

LATEX GLOVE POUCH

HANDCUFF POUCH - SINGLE

Holds two pair of latex gloves or standard size pager.

Dual snap design allows use of almost all handcuff styles and sizes. Fits new ASP® chain and hinge handcuff designs.

44A300BK-GSA

44A100BK-GSA

LIGHT POUCH 6P/6R/TL-2/TT-2/M-6

GLADIUS™ POUCH

Fits Streamlight® Scorpion/Strion/TT-2,/TL-2, SureFire® 6P/G-2, Pelican M-6 and similar lights. 44A200BK-GSA

Fits Night-Ops™ Gladius™ Light. 44A202BK-GSA

134

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

® Tactical & Riot Equipment by BLACKHAWK Gear & Products by BLACKHAWK!

LOOKING FOR

EXTRAORDINARY COMFORT IN YOUR EVERY DAY GEAR? START RIGHT WITH OUR ERGONOMIC PADDED DUTY BELT.

DUTY BELT Ergonomically designed Duty Belt with padded edges. Nylon Loop backing mates to Duty Gear Trouser Belt. 44B2XSBK-GSA 44B2SMBK-GSA 44B2MDBK-GSA 44B2LGBK-GSA 44B2XLBK-GSA 44B2XXBK-GSA

XSmall Small Medium Large XLarge XXLarge

Fits sizes 22-24 Fits sizes 26-30 Fits sizes 32-36 Fits sizes 38-42 Fits sizes 44-48 Fits sizes 50-54

TRIPLE RELEASE RETENTION BUCKLE

TROUSER BELT Molded Nylon Loop Hook will not fray belt loops or trousers. 44B1XSBK-GSA 44B1SMBK-GSA 44B1MDBK-GSA 44B1LGBK-GSA 44B1XLBK-GSA 44B1XXBK-GSA

Head Office: 1-866-652-2877

XSmall Small Medium Large Xlarge XXlarge

Fits sizes 22-24 Fits sizes 26-30 Fits sizes 32-36 Fits sizes 38-42 Fits sizes 44-48 Fits sizes 50-54

West: (604) 526-1631

Prairies: 1-866-652-2877

MOLDED NYLON HOOK WON’T FRAY BELT LOOPS OR TROUSERS

East: 1-877-993-9968

135

BLACKHAWK!

Gear & Products by BLACKHAWK!® NEW!

BLACKHAWK! REINFORCED WEB DUTY BELT Great performance at a great price. Two layers of nylon web are reinforced with a polymer spine for durability 44B3SMBK 44B3MDBK

NEW!

Black Black

Small Medium

44B3LGBK 44B3XLBK

Black Black

Large X-Large

BLACKHAWK! REINFORCED WEB DUTY BELT WITH LOOP INNER All of the great features of our Reinforced Web Duty Belt plus the addition of a nylon loop inner surface to mate up with the nylon hook of our inner duty belts means more stability for your duty belt and more secure mounting of your accessories. 44B4LGBK Black Large 44B4SMBK Black Small 44B4XLBK Black X-Large 44B4MDBK Black Medium

NEW! ®

BLACKHAWK! WEB DUTY BELT This double layer web duty belt gives you strong performance at a budget price. It includes a triple retention buckle and molded keepers for serious use. 44B6SMBK 44B6MDBK

Black Black

Small Medium

44B6LGBK 44B6XLBK

Black Black

Large X-Large

NEW! ®

BLACKHAWK! INNER DUTY BELT – HOOK AND LOOP CLOSURE Double layer nylon web inner belts fasten with nylon hook and loop providing increased stability. 44B7SMBK Black Small 44B7LGBK Black Large 44B7MDBK Black Medium 44B7XLBK Black X-Large

NEW! ®

BLACKHAWK! LOOPBACK INNER BELT The woven nylon hook mates up to the nylon loop on the inside of many duty belts for added stability or reverse the belt for courtroom wear without a duty belt. 44B5SMBK 44B5MDBK

Black Black

Small Medium

44B5LGBK 44B5XLBK

Black Black

Large X-Large

ERS ® KEEP N I BLACKHAWK! NYLON BELT KEEPERS E M CO ! F 4 • Resists stretching or fraying SET O • Nylon web keepers available for both 2” or 2 1/4” Belts

136

44B350BK 44B351BK

FITS 2” BELTS FITS 2 1/4” BELTS

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

THUMB ACTIVATED PIVOT GUARD

THE SERPA AUTO LOCK LEVEL 3 DUTY HOLSTER ™

Level 3 retention holsters have long been the standard for law enforcement duty use. The problem has been that many holsters that provide this level of protection are clumsy to operate and can prevent the officer from drawing his weapon rapidly under stress. The Level 3 SERPA Auto Lock holster uses uses your natural drawing motion to release the weapon. No un-natural motions or complicated sequences to remember, just grab and draw.

• SERPA Auto Lock System provides a quick, natural draw with immediate security upon re-holstering to increase officer safety • Injection molded carbon fiber composite construction provides incredible strength • Extremely light weight • No snaps or hoods to accidentally open. Weapon stays secured until you decide to draw • Ease of training, same drawing technique for undercover, tactical and duty NATURAL GRIP RELEASE

SERPA AUTO LOCK TECHNOLOGY

PASSIVE RETENTION ADJUSTMENT

ATTACHES TO BELT WITHOUT HAVING TO REMOVE THE BUCKLE.

PLAIN

Once opened the pivot guard can’t close without the gun in holster.

NEW FINISHES

MATTE FINISH

PLAIN FINISH

BASKET WEAVE FINISH

BERETTA 92/96 with or w/o rail 44H104BK-R Right GLOCK 17/19/22/23/31/32 44H100BK-R Right 44H100BK-L Left GLOCK 20/21 AND S&W M&P .45 44H113BK-R Right 44H113BK-L Left H&K P30 AND P-2000 Right 44H117BK-R 44H117BK-L Left SIG 220/226/228/229 Right 44H106BK-R 44H106BK-L Left SMITH AND WESSON M&P 9/40 44H125BK-R Right 44H125BK-L Left

BERETTA 92/96 with or w/o rail 44H104PL-R Right GLOCK 17/19/22/23/31/32 44H100PL-R Right 44H100PL-L Left GLOCK 20/21 AND S&W M&P .45 44H113PL-R Right 44H113PL-L Left H&K P30 AND P-2000 Right 44H117PL-R 44H117PL-L Left SIG 220/226/228/229 Right 44H106PL-R 44H106PL-L Left SMITH AND WESSON M&P 9/40 44H125PL-R Right 44H125PL-L Left

BERETTA 92/96 with or w/o rail Right 44H104BW-R GLOCK 17/19/22/23/31/32 44H100BW-R Right 44H100BW-L Left GLOCK 20/21 AND S&W M&P .45 44H113BW-R Right 44H113BW-L Left H&K P30 AND P-2000 Right 44H117BW-R 44H117BW-L Left SIG 220/226/228/229 44H106BW-R Right 44H106BW-L Left SMITH AND WESSON M&P 9/40 44H125BW-R Right Left 44H125BW-L

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

MATTE

137

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

™

BLACKHAWK! CQC LEVEL 2 SERPA SPORTSTER HOLSTER For high threat level environment, use the Original SERPA! SERPA Sportster (gun metal gray holster body with black SERPA mechanism) • Developed for civilian concealed carry and range use, but still has great patented SERPA design. • Traditional polymer material construction found in other injection molded holsters. • Comes with paddle mount only. • Paddle and traditional polymer for civilian use. CQC™ LEVEL 2 SERPA SPORTSTER GUN METAL GREY 413500BK- L or R Glock 17/22/31 413501BK- L or R Glock 26/27/33 413502BK- L or R Glock19/23/32/36 413503BK- L or R Colt1911& clones 413504BK- L or R BERETTA 92/96 413505BK- L or R SIG 228/229 413506BK- L or R SIG 220/226 413507BK-R Springfield XD R Gn Mtl Gry 413509BK- L or R HK USP COMP L 413510BK- L or R S&W 5900/4000/TS 413513BK- L or R GLOCK 20/21 413514BK- L or R HK USP FULL 413516BK- L or R HK P-2000 413518BK- L or R FN 5.7 L 413520BK- L or R S&W J-frme rvlv 413525BK- L or R S&W M&P

FULL LENGTH HOLSTER BODY PROTECTS REAR SIGHTS

THE SERPA LEVEL 2 AUTO LOCK™ DUTY HOLSTER Based on our popular Tactical SERPA Holster, this jacket slot belt loop version gives both the tactical and patrol officer the option of the SERPA’s retention and speed in a duty style holster. Whether worn as part of your duty rig, or as a belt mounted holster for tactical use, you get the same great SERPA system, now in a duty holster.

SERPA ACTIVE RETENTION SYSTEM

TENSION ADJUSTABLE DETENT

138

ANGLE ADJUSTABLE BELT LOOP

BLACKHAWK! LEVEL 2 SERPA AUTO LOCK™ DUTY HOLSTER BLACK 44H000BK-L Left Glock 17/19/20/21/22/23/31/32 and S&W M&P Glock 17/19/22/23/31/32 44H000BK-R Right 44H003BK-L Left Colt 1911 and clones with or without Picatinny rails Colt 1911 and clones with or Right 44H003BK-R without Picatinny rails 44H004BK-L Left Beretta 92/96 - not for Brigadier/Elite 44H004BK-R Right Beretta 92/96 - not for Brigadier/Elite Sig 220/226/228/229 with or 44H006BK-L Left without Picatinny Rail 44H006BK-R Right Sig 220/226/228/229 with or without Picatinny Rail 44H013BK-R Right Glock 20/21/ 21SF and S&W M&P Pistol Right Glock 21SF w/larger 1913 rail 44H026BK-R Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

速

Gear & Products by BLACKHAWK!速

LEVEL 3 SERPA LIGHT BEARING DUTY HOLSTER (XIPHOS NT PISTOL LIGHT)

THUMB ACTIVATED PIVOT GUARD

Finally an answer to the thousands of requests we have received for a SERPA duty holster that works with a pistol light. Now that the Night Ops Weapon Mounted Light has solved the issue of blocking the trigger guard, you can get the Level 3 SERPA holster, noted for its speed and retention, to wear with a light while you are on duty. Outstanding retention, extremely fast draw even under stress and immediate lockin upon reholstering. Now you can have it all.

MATTE FINISH GLOCK 17/19/22/23/31/32 44H500BK-L Left 44H500BK-R Right GLOCK 21 & SW MP.45 44H513BK-R Right

NEW FINISHES

SERPA AUTO LOCK TECHNOLOGY

HOUSES NIGHT-OPS WEAPON MOUNTED LIGHT

BASKET WEAVE FINISH GLOCK 17/19/22/23/31/32 44H500BW-L Left 44H500BW-R Right GLOCK 21 & SW MP.45 44H513BK-R Right

PLAIN

PRESSURE ADJUSTABLE TENSIONING FEATURE

PLAIN FINISH GLOCK 17/19/22/23/31/32 44H500PL-L Left 44H500PL-R Right GLOCK 21 & SW MP.45 44H513PL-R Right

BASKET WEAVE

LEVEL 3 SERPA LIGHT BEARING DUTY HOLSTER & NIGHT-OPS WEAPON LIGHT COMBO Now you can get both the Level 3 SERPA Duty Holster and the new Night Ops Weapon Light in one package. Bundled together for convenience, this package gives you everything you need for your duty weapon.

HOLSTER + LIGHT

SPECIAL COMBO PRICE MATTE FINISH

BASKET WEAVE FINISH

PLAIN FINISH

HOLSTER FOR GLOCK 17/19/22/23/31/32 PLUS NIGHT OPS WEAPON LIGHT 44H600BK-L Left 44H600BK-R Right GLOCK 21 & SW MP.45 WITH NIGHT-OPS WEAPON LIGHT 44H613BK-R Right

HOLSTER FOR GLOCK 17/19/22/23/31/32 44H600BW-L Left Right 44H600BW-R GLOCK 21 & SW MP.45 44H613BW-R Right

HOLSTER FOR GLOCK 17/19/22/23/31/32 44H600PL-L Left 44H600PL-R Right GLOCK 21 & SW MP.45 Right 44H613PL-R

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

139

BLACKHAWK!

Gear & Products by BLACKHAWK!®

™

BLACKHAWK! CQC DETACHABLE SLIDE HOLSTER This update to the well-known slide design allows you to attach and detach the holster to your belt in just seconds. Our belt loops go under your belt and fasten with extra strength snaps to secure the holster at your side, without ever undoing your belt. Ideal for detectives and others who are in and out of the office or regularly visit facilities where weapons have to be removed. Covered trigger guard allows high level of safety and the adjustable thumb break gives you a perfect fit for whatever model pistol you carry. • Increased-strength snaps stay fastened • Belt loops have angled cut for use with a variety of belt widths • On or off in just seconds • Black, non-reflective snap covers

140

420100BK-L 420100BK-R 420101BK-L 420101BK-R 420102BK-L 420102BK-R 420103BK-L 420103BK-R 420104BK-L 420104BK-R 420105BK-L 420105BK-R 420106BK-L

Beretta 92/96-Left Beretta 92/96-Right Colt Gov't/Comm-Left Colt Gov't/Comm-Right Glock 9mm/.40 cal-Left Glock 9mm/.40 cal.-Right Glock 20/21-Left Glock 20/21-Right H&K P2000/USP Comp.-Left H&K P2000/USP Comp.-Right

420106BK-R 420107BK-L 420107BK-R

SigPro 2003/2340/2022-Right Sig 220/225/226-Left Sig 220/225/226-Right

420108BK-L 420108BK-R 420109BK-L 420109BK-R

Springfield XD/XD Comp.-Left Springfield XD/XD Comp.-Right Walther P99-Left

Head Office: 1-866-652-2877

S&W J Frames-Left S&W J Frames-Right SigPro 2003/2340/2022-Left

Walther P99-Right

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

™

BLACKHAWK! CQC LEATHER INSIDE-THE-PANTS HOLSTER For deep concealment for a secondary weapon, working undercover or just offduty, this is the ideal choice. Features a shirt shield to keep leather between the slide and your body, to increase comfort and prevent shirt from blocking holster. Angle-adjustable belt loop is mounted to reinforced upper body for stability. • Adjustable tension-screw gives you the choice on level of retention • Shirt shield protects clothing, keeps holster opening unobstructed and increases comfort • Allows use for middle-of-the-back, strong side, appendix or cross-draw carry • Less bulk than most leather inside-the-pants holsters • Molded sight track for smooth draw and re-holster

420400BK-L 420400BK-R 420401BK-L 420401BK-R 420402BK-L 420402BK-R 420403BK-L 420403BK-R 420404BK-L 420404BK-R 420405BK-L 420405BK-R 420406BK-L 420406BK-R 420407BK-L 420407BK-R 420408BK-L 420408BK-R 420409BK-L 420409BK-R 420410BK-L 420410BK-R 420411BK-L 420411BK-R 420412BK-L 420412BK-R 420413BK-L 420413BK-R

Beretta 92/96-Left Beretta 92/96-Right Colt Gov't 5"-Left Colt Gov't 5"-Right Colt Comm. 4"-Left Colt Comm. 4"-Right Glock 17/19/22/23/31-Left Glock 17/19/22/23/31-Right Glock 26/27/33-Left Glock 26/27/33-Right H&K P2000/USP Comp.-Left H&K P2000/USP Comp.-Right S&W J Frame-Left S&W J Frame-Right S&W most 5900/4000/900-Left S&W most 5900/4000/900-Right SigPro 2003/2340/2022-Left SigPro 2003/2340/2022-Right Sig 228/229/225-Left Sig 228/229/225-Right Sig 220/226-Left Sig 220/226-Right Springfield XD-Left Springfield XD-Right Springfield XD Comp.-Left Springfield XD Comp.-Right Walther P99-Left Walther P99-Right

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

141

BLACKHAWK!

Gear & Products by BLACKHAWK!®

™

BLACKHAWK! CQC LEATHER CHECK-SIX™ HOLSTER Whether behind the back or just behind the hip, this holster gives you options, comfort and speed. Contour double-stitched premium leather has a molded sight track, adjustable tension screw and dual belt slots designed to pull the gun tight to your body. Cut to provide a combat grip from the start, this holster gives you outstanding concealability, even when your covering garment is open. When employing a long gun as primary weapon, this holster’s position is perfect for your handgun, as it won’t interfere with operation of the long gun. • Designed to hold handgun close to the natural contour of the waist • Ideal for secondary weapons • Flat holster back keeps sharp edges away from body • Low profile design aids concealment

420700BK-L 420700BK-R 420701BK-L 420701BK-R 420702BK-L 420702BK-R 420703BK-L 420703BK-R 420704BK-L 420704BK-R 420705BK-L 420705BK-R 420706BK-L 420706BK-R 420707BK-L 420707BK-R 420708BK-L 420708BK-R 420709BK-L 420709BK-R

142

Head Office: 1-866-652-2877

West: (604) 526-1631

Beretta 92/96-Left Beretta 92/96-Right Colt Gov't 5"-Left Colt Gov't 5"-Right Colt Comm. 4"-Left Colt Comm. 4"-Right Glock 17/19/22/23-Left Glock 17/19/22/23-Right Glock 26/27/33-Left Glock 26/27/33-Right S&W J Frame-Left S&W J Frame-Right SigPro 2003/2340/2022-Left SigPro 2003/2340/2022-Right Sig 228/229/225-Left Sig 228/229/225-Right Springfield XD Comp.-Left Springfield XD Comp.-Right Walther P99-Left Walther P99-Right

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! MEDIUM ALERT BAG Great new design for a tactical load out bag. Unbelievable compartmentalization and versatility. Unzips and folds out flat. • 1000 denier nylon and exceptional stitching • Zippered mesh dividers in all compartments • Top dual access compartment- from outside or inside • Top pockets padded and fold flat when not used • External compression straps • Retractable handle and skate wheels

20LO04BK Black

Wheeled version does not come with backpack straps

BLACKHAWK! A.L.E.R.T. BAG (ASSAULT LOAD-OUT EMERGENCY RESPONSE TRANSPORT OR TRUNK) Sick of back problems from lugging your gear bags? This bag is the answer. • • • •

9 interior mesh pouches for gear storage Fully accessible hinge-type lid Highest quality in-line skate wheels Hide-away pull handle, full wrap around carry handle and two end cap carry handles, • Four clear ID insert pockets, two on top, one at each end • Bottom panel has rigid stiffeners for efficient carry and rolling • Made with two layers of our 1000 denier nylon for superior use and abuse resistance

LOAD OUT BAG (SOFT BOTTOM, BACKPACK STRAPS, NO WHEELS)

20LO00BK Head Office: 1-866-652-2877

Black West: (604) 526-1631

Prairies: 1-866-652-2877

20LO03BK

20LO03BK Black NSN# 8465-01-517-6319 Dim: 43” X 15” X 13” Cubes: 8385 East: 1-877-993-9968

143

BLACKHAWK!

Gear & Products by BLACKHAWK!®

S.T.R.I.K.E. SNIPER REST • Provides stability and accuracy as a long-gun shooting platform • Attaches to webbing on packs using two #9 speed clips; turns any pack into a sniper pack • 7.5” square x 2.5” high EW!

SPEED CLIP VERSION 38CL89BK 38CL89CT 38CL89OD 38CL89AU

COLOR BLACK Coyote Tan Olive Drab ARPAT

BLACKHAWK! MAGAZINE COUPLER • Holds two M-16/M4 30 round magazines (60 rounds total) • Fixed standoff points within the coupler offset the left magazine for rapid transition • Molded case and internal framework hold magazines securely and orient them in perfect parallel for smooth loading between magazines • Boxed shape protects both magazine bottoms from damage • Ergonomic design eases operator handling of two loaded magazines simultaneously • Three bolt-through connectors hold the magazines tightly in place • The “Top Round Protector” keeps ammunition protected, secure and properly seated • The “Top Round Protector” is secured by an elastic band that releases with a slight tap prior to loading 70MC00BK

Black

! NEW BLACKHAWK! COUPLED MAGAZINE POUCH-SINGLE

SPEED CLIP VERSION 38CL100BK-GSA Black 38CL100CT-GSA Coyote Tan 38CL100OD-GSA Olive Drab 38CL100AU-GSA ARPAT

• Designed to accommodate two M4/M16 magazines mounted in the BLACKHAWK! Magazine Coupler (not included) • Holds two M-16/M4 30 round magazines (60 ROUNDS TOTAL) • 3.75” X 9”h X 2.5”d

EW! BLACKHAWK! COUPLED MAGAZINE POUCH-DOUBLE

N SPEED CLIP VERSION 38CL103BK-GSA Black 38CL103CT-GSA Coyote Tan 38CL103OD-GSA Olive Drab 38CL103AU-GSA ARPAT

• Designed to accommodate four M4/M16 magazines mounted in two BLACKHAWK! Magazine Couplers (not included) • Holds four M-16/M4 30 round magazines (120 ROUNDS TOTAL) • 6.5” X 9”h X 2.5”d

! NEW BLACKHAWK! COUPLED MAGAZINE POUCH-TRIPLE

SPEED CLIP VERSION Black 38CL102BK-GSA Coyote Tan 38CL102CT-GSA 38CL102OD-GSA Olive Drab 38CL102AU-GSA ARPAT

144

• Designed to accommodate six M4/M16 magazines mounted in three BLACKHAWK! Magazine Couplers (not included) • Holds six M-16/M4 30 round magazines (180 ROUNDS TOTAL) • 9” X 9”h X 2.5”d

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! ENHANCED BATTLE BAG Enhanced modular version of this great “go bag”. Designed to be kitted out based on the mission. S.T.R.I.K.E. webbing on 3 sides allow user to configure to his needs. Bag is slightly larger than the original and the map case is now detachable! FEATURES: • Completely configurable version of the popular Battle Bag • Slightly larger in all dimensions to accommodate a small laptop computer • Stiffened construction to retain structure • Flap is also a detachable map case • Name tag window on flap • Body of bag is covered by webbing; so operator can mount a variety of pouches • HawkTex® pad on shoulder strap for comfort • “D” rings on back for other mounting options • Carry handle on top of flap and bag when map is detached • 12” w x 12” h x 5” d

NEW!

BLACKHAWK! BATTLE BAG 60BB01BK Black 60BB011CT Coyote Tan 60BB01OD Olive Drab 60BB01FG Foliage Green

BLACKHAWK! BATTLE BAG "Battle Bag", "Grab-to-Go Bag" - call it what you will, but you need one. Organize all of your warfighting necessities in this over-the-shoulder carry bag. Everything from comms, chem. lights, concealed handgun, spare magazines, maps, GPS - all have a place. • 1000 denier nylon construction. • YKK® zippers • Integral shoulder and waist strap (stowable) • Map pocket (9.5x13-in) inside protective storm flap with side release closure • Internal pouch for handheld radio with antenna access • Internal elastic loops for chem. lights • Internal hook & loop section for handgun and spare pistol magazine (or any modular hook & loop pouches) • 2 dividers creating 3 internal sections • External zippered accessory pocket with elastic securing bands holds 3 magazines • External (4x5-in) zippered pouches at either end to hold GPS, phones, etc. • Dims: 11” x 5” x 10”

NEW!

BLACKHAWK! BATTLE BAG 60BB02BK Black Coyote Tan 60BB02DE 60BB02OD Olive Drab 60BB02FG Foliage Green

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

145

BLACKHAWK!

Gear & Products by BLACKHAWK!®

ZW5 & ZW7 WATERPROOF SIDE-ZIP BOOTS BLACKHAWK! Warrior Wear™ Side-Zip Boots are fast, light, comfortable, easy to put on, and waterproof. Choose from 5” or 7” height to suit your mission. • Durable, easy-to-use molded tooth zipper opening

! NEW

• Waterproof barrier and gusseted tongue • Water-resistant Cordura® and highabrasion full-grain leather upper • Nylon shank • Long-wearing, water-friendly polyurethane midsole • Dri-Lex® inner lining wicks away moisture and dries quickly for maximum comfort Vibram® “Multisport” oil resistant TC4+ compound outsole has large, open lugs for traversing debris and provides excellent traction on irregular surfaces

Washable, Anti-Microbial, Ortholite® custom molded footbed

ZW5 WATERPROOF SIZE-ZIP Model ZW5 (5”) 83BT04BK

ZW7 WATERPROOF SIZE-ZIP Model ZW5 (7”) 83BT04BK

DESERT OPS BOOT BLACKHAWK! Warrior Wear™ Desert Ops Boots are the fastest, lightest, most comfortable desert combat boots available. Now also available in lighter Desert Tan color to comply with U.S. Army regulations. • Fully gusseted tongue prevents debris from entering boot Washable, Anti-Microbial, Ortholite® custom molded footbed

• Water-resistant Cordura® and high-abrasion suede upper for rugged durability. Cordura® panels breathe for comfort and help to reduce weight • 2” ankle webbing enhances stability • Durable heel and toe reinforcements provide abrasion and scuff resistance • Steel shank provides additional support needed when under the load of a full pack • Long-wearing, water-friendly polyurethane midsole • Dri-Lex® inner lining wicks away moisture and dries quickly

Vibram® “Multisport” oil resistant TC4+ compound outsole has large, open lugs for traversing debris and provides excellent traction on irregular surfaces

146

DESERT TAN COYOTE TAN

83BT02DE 83BT02CT

SympaTex is a registered trademark owned by SympaTex Technologies GmbH. Vibram is a registered trademark owned by VIBRAM S.P.A. Ortholite is a registered trademark owned by O2 Partners, LLC. Dri-Lex is a registered trademark owned by Faytex Corp. Cordura® is a registered trademark with the INVISTA North America S.A.R.L. ETC® is a registered trademark of Worldwide Inc.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

LIGHT ASSAULT BOOT The fastest, lightest and most agile footwear designed specifically for today's Special Operations Warrior. Ideal for waterborne ops. • Injection Molded Lace Lock • Quick no-tie method is secure, and prevents laces from catching on objects • Lace ends stow away neatly in lace pocket on tongue • Lightweight, breathable, nylon mesh and high-abrasion, quick-dry, synthetic microfiber upper • Long-wearing, water-friendly, polyurethane midsole • Vibram® “Trail Run” oil-resistant rubber outsole • Durable,rubberized toe and heel reinforcements • Waterproof recycled molded insole board with built-in shank Washable, Anti-Microbial, Ortholite® custom molded footbed

BLACK OPS BOOT BLACKHAWK! Warrior Wear™ Black Ops™ Boots are fast, light, comfortable, non-metallic, and entirely waterproof. Waterproof SympaTex® barrier and gusseted tongue keeps out water

• Fully gusseted tongue prevents debris from entering boot • 2” ankle support webbing enhances stability • Smooth pulling tunnel eyelets for an even draw when tightening laces • Water-resistant Cordura® and full-grain leather upper for rugged durability. •Cordura® panels breathe for comfort and help to reduce weight

Nylon shank Vibram® “Multisport” oil resistant TC4+ compound outsole has large, open lugs for traversing debris and provides excellent traction on irregular surfaces

TACTICAL RESPONSE BOOT Designed for SWAT professionals yet comfortable enough for all-day patrol. The heavy-duty, yet lightweight design won't slow you down when seconds count. Non-metallic throughout.

Shinable toe for dress appearance

• Smooth pulling non-metallic tunnel eyelets • Leather ankle strap for increased stability • Water-resistant Cordura® and high-abrasion full-grain leather upper • Injection-molded nylon shank • Durable ETC® friction reducing inner lining keeps you cool and comfortable

Vibram® “Trek” compound outsole

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

147

BLACKHAWK!

Gear & Products by BLACKHAWK!®

LIGHTWEIGHT SOCK FEATURES: • Designed especially for use in warm to cool weather • Mid-calf design with wide elastic calf band • Anatomic foot design with Y-heel and seamless toe • Elastan bands at the ankle and instep maintain the sock’s shape and prevent slippage • 50/50 Virgin Wool/Acrylic blend footbed and heel/achilles area provides cushioning and blister protection • 50/50 Coolmax®/Cotton blend upper and shaft wicks perspiration and regulates temperature

LIGHTWEIGHT BOOT SOCK

Material Content: • 20% Coolmax • 20% Wool • 20% Cotton • 20% Acrylic • 15% Polyester • 5% Elasthan MEDIUM WEIGHT BOOT SOCK

Available Sizes: Men’s 9-11, 10-13, 13-16

MEDIUM WEIGHT FEATURES: • Designed especially for use in cool to cold weather • Mid-calf design with wide elastic calf band • Anatomic foot design with Y-heel and seamless toe • Elasthan bands at the ankle and instep maintain the sock’s shape and prevent slippage • 100% Virgin Merino Wool footbed and heel/achilles area provides warmth, excellent cushioning, and blister protection MATERIAL CONTENT: • 60% Wool • 20% Acrylic • 15% Polyester • 5% Elasthan HEAVYWEIGHT BOOT SOCK

Available Sizes: Men’s 9-11, 10-13, 13-16\ Coolmax® is a registered trademark of E.I. DuPont de Nemours & Co., Inc.

HEAVYWEIGHT Designed especially for use in winter weather with BLACKHAWK! Warrior Wear boots. BLACKHAWK! LIGHTWEIGHT BOOT SOCK 83SK00BK-9-11 Lightweight Boot Sock Lightweight Boot Sock 83SK00BK-10-13 83SK00BK-13-16 Lightweight Boot Sock BLACKHAWK! MEDIUM WEIGHT BOOT SOCK 83SK01BK-9-11 Medium Weight Boot Sock Medium Weight Boot Sock 83SK01BK-10-13 83SK01BK-13-16 Medium Weight Boot Sock

148

BLACKHAWK! HEAVYWEIGHT BOOT SOCK Heavyweight Boot Sock 83SK02BK-9-11 83SK02BK-10-13 Heavyweight Boot Sock Heavyweight Boot Sock 83SK02BK-13-16

FEATURES: • Mid-calf design with wide elastic calf band • Anatomic foot design with Y-heel and seamless toe • Elasthan bands at the ankle and instep maintain the sock’s shape and prevent slippage • 60/40 Virgin Wool/Polypropylene footbed and heel/achilles area provides warmth, excellent cushioning, and blister protection • 60/40 Virgin Wool/Acrylic Shaft keeps you warm and dries quickly MATERIAL CONTENT: • 42% Wool • 15% Acrylic • 27% Polypropylene • 14% Nylon • 2% Elasthan Available Sizes: Men’s 9-11, 10-13, 13-16

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

S.O.L.A.G.™ KEVLAR® - BLACK 8114SMBK SMALL 8114MDBK MEDIUM NSN# 8415-01-507-0699 8114LGBK LARGE NSN# 8415-01-507-0698 8114XLBK X-LARGE NSN# 8415-01-507-0700 8114XXBK XX-LARGE NSN# 8415-01-507-0701

™

BLACKHAWK! S.O.L.A.G. WITH KEVLAR OR NOMEX ®

(SPECIAL OPERATIONS LIGHT ASSAULT GLOVE) • Excellent all purpose tactical glove • KEVLAR® flame, flash, and cut resistant protection • Dual-layer palm with Pittards™ WR100X and Armortan® treated premium goatskin leather for water repellency and 25% more abrasion resistance • Over-wrap fingertip design ensures maximum tactility and durability • Padded protection on back of hand and fingers • Back-of-hand and wrist adjustments for perfect, secure fit

S.O.L.A.G.™ KEVLAR® - OLIVE DRAB 8114SMOD SMALL 8114MDOD MEDIUM 8114LGOD LARGE 8114XLOD X-LARGE 8114XXOD XX-LARGE S.O.L.A.G.™ NOMEX® - COYOTE TAN 8114SMCT SMALL 8114MDCT MEDIUM 8114LGCT LARGE 8114XLCT X-LARGE 8114XXCT XX-LARGE

™

BLACKHAWK! LAW ENFORCEMENT CUT RESISTANT SEARCH GLOVE WITH KEVLAR ®

• Vital equipment for law enforcement patrol or military police • DuPont™ KEVLAR® provides moderate cut resistance* • Durable, high-quality, drum-dyed cowhide leather shell • Ergonomic for maximum dexterity • Classic short cuff design won’t interfere with jacket or shirt cuffs

EXTENDED CUFF- BLACK 8031SMBK SMALL MEDIUM 8031MDBK 8031LGBK LARGE X-LARGE 8031XLBK XX-LARGE 8031XXBK

DuPont™ KEVLAR® Cut-Resistant Glove Liner

™

BLACKHAWK! LAW ENFORCEMENT CUT RESISTANT SEARCH GLOVE WITH SPECTRA GUARD ™

• Vital equipment for law enforcement patrol or military police • Spectra Guard™ liner provides high-level cut resistance* • Durable, high-quality, quality drum-dyed cowhide leather shell • Ergonomically designed for maximum dexterity Spectra Guard™ Cut-Resistant Glove Liner Head Office: 1-866-652-2877

West: (604) 526-1631

SHORT CUFF- BLACK 8030SMBK SMALL 8030MDBK MEDIUM 8030LGBK LARGE 8030XLBK X-LARGE 8030XXBK XX-LARGE

SHORT CUFF-BLACK SMALL 8034SMBK 8034MDBK MEDIUM 8034LGBK LARGE 8034XLBK X-LARGE 8034XXBK XX-LARGE EXTENDED CUFF- BLACK SMALL 8035SMBK 8035MDBK MEDIUM LARGE 8035LGBK 8035XLBK X-LARGE 8035XXBK XX-LARGE

Prairies: 1-866-652-2877

East: 1-877-993-9968

149

BLACKHAWK!

Gear & Products by BLACKHAWK!®

“Trigger-ready” index finger

Easy-off pull tab

BLACKHAWK! ECW2 WINTER OPERATIONS GLOVE • • • • • • • • •

Redesigned for even more warmth, dexterity, and durability Plush fleece and brush tricot liner 200 gram insulation Hipora® Beta breathable/waterproof liner Rugged water resistant Taslan nylon shell Snug elastic cuff and gauntlet Textured palm reinforcement for sure grip and durability Lean “trigger-ready” index finger Easy-off pull tab on middle finger ECW2 WINTER OPERATIONS GLOVE - BLACK 8086SMBK SMALL 8086MDBK MEDIUM 8086LGBK LARGE 8086XLBK X-LARGE 8086XXBK XX-LARGE

NEW

Hipora® is a registered trademark of Kolon Industries, Inc. ®

BLACKHAWK! FLASH/FLAME RESISTANT BALACLAVAS WITH NOMEX ®

The following characteristics apply to ALL of our balaclavas with NOMEX®. Individual models are listed below. • Flame/flash protection for the head and neck • Constructed entirely of DuPont™ NOMEX® fabric • Will not support flame or combust up to 800 º F (427º C) • Flat-seam stitching won’t irritate when wearing a helmet HEAVYWEIGHT BIBBED BALACLAVA WITH NOMEX® • 7 oz. DuPont™ NOMEX® • Extended bib protection • 15” total length (38 cm) 333004BK BLACK NSN# 8415-01-517-6323 333004CT COYOTE TAN 333004OD OLIVE DRAB 333004FG FOLIAGE GREEN

LIGHTWEIGHT BALACLAVA WITH NOMEX® • Lightweight 3 oz. DuPont™ NOMEX® • Ideal for hot climates • 18” total length (41 cm) 333005BK BLACK 333005CT COYOTE TAN 333005OD OLIVE DRAB FOLIAGE GREEN 333005FG BLACKHAWK!® POLYPROPYLENE BALACLAVA® • Provides warmth and moisture wicking comfort to the head and neck • Offers moderate protection from cuts and scratches • Flat-seam stitching on the inside won’t irritate when wearing a helmet NOTE: This balaclava is not designed to protect against flash/flame.

150

333003BK

BLACK

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! A.C.E. TACTICAL GOGGLE

ANTI-SLIP SILICONE

The BLACKHAWK! A.C.E. (Advanced Combat Eyewear) Tactical Goggle is designed to meet the most rigorous demands of military and law enforcement tactical operators. It’s low-profile design is ideal for use with PASGT, ACH, or MICH helmets and allows excellent peripheral vision. An injection molded 3.0mm polycarbonate lens provides substantial protection and superior optics. Optional tear-off lenses can be used to protect the lens, allow quick removal of debris from view, or enable quick tinting/un-tinting of lens when operating in changing light conditions. • Exceeds ANSI Z87.1 & Mil-Spec MIL-V-43511C standards for impact resistance • Precise injection-molded construction ensures dimensionally stable optics, providing a distortion free view throughout the entire lens • 100% UVA & UVB protection • High-quality flow-coated anti-scratch and anti-fog treatments • Cage frame design with dust filter around entire circumference for maximum ventilation and particle filtration • Canted 35mm strap with anti-slip silicone aligns properly with combat helmets and stays in place • Removable protective nose guard • Acetate Tear-Off Lens capable (one clear and one grey (smoke) tint included with purchase) • Available in black, coyote tan, or foliage green • Clear or grey (smoke) tint replacement lenses available

BLACKHAWK! ADVANCED TACTICAL KNEE PADS V.2 • New dual injection-molded flex cap design allows maximum flexibility for ease of movement • Minimizes gap between the bottom of the cap and nylon carrier when flexed • Padded side extensions for comfort and improved strap positioning • Contoured interior ledge secures pad positioning • 600 Denier nylon shell • Closed-cell foam padding provides excellent shock resistance and prevents water absorption • Adjustable hook and loop elastic straps • Patents pending

A.C.E. REPLACEMENT LENS 85RL00CL CLEAR 85RL00GY GREY/SMOKE

CAGE DESIGN FOR MAXIMUM VENTILATION

BLACKHAWK! ADVANCED TACTICAL ELBOW PADS V.2 • Substantial protection in a lightweight, durable package • Non-slip, flexible, molded polyurethane cap • 600 Denier nylon shell • New contoured interior ledge prevents pad from slipping downward • Closed-cell foam padding provides excellent shock resistance and prevents water absorption • Hook and loop elastic straps 802600BK 802600CT 802600OD 802600FG

BLACK COYOTE TAN OLIVE DRAB FOLIAGE GREEN

Flex design enhances comfort and keeps cap close to padding when elbow is bent.

ADVANCED TACTICAL KNEE PADS V.2 808300BK BLACK 808300CT COYOTE TAN 808300OD OLIVE DRAB 808300FG FOLIAGE GREEN West: (604) 526-1631

A.C.E. TEAR-OFF LENSES 85RL01CL CLEAR - 10 PK 85RL01GY GREY/SMOKE - 10 PK

TEAR-OFF LENS CAPABLE

REMOVABLE NOSE GUARD

Head Office: 1-866-652-2877

A.C.E. TACTICAL GOGGLE 85AC00BK BLACK 85AC00CT COYOTE TAN 85AC00FG FOLIAGE GREEN

Prairies: 1-866-652-2877

East: 1-877-993-9968

151

BLACKHAWK!

Gear & Products by BLACKHAWK!® ANTI-ROLL BODY 75200OD Olive Drab 75200CT Coyote Tan 75200BK Black SIZE & WEIGHT SPECIFICATIONS BEZEL DIAMETER - 1.25" TAILCAP DIAMETER - 1.25" BODY DIAMETER - 1" LENGTH (BEZEL TO TAILCAP) - 6.23" WEIGHT (W/O BATTERIES) - 6.63 OZ

At the heart of this fighting tool is a robust electronics package that can only be described as REVOLUTIONARY. The light features a patent pending multifunction tailcap that allows the operator to quickly select various modes including: Momentary

Switching, Constant ON, Strobe Mode, Dimming, and Lock-Out all with intuitive, user friendly, one-finger operation.

NIGHT-OPS XIPHOS NT WEAPONS MOUNTED LIGHT 75204BK XIPHOS’ STROBING FUNCTION PROGRAMMED FUNCTIONS • Momentary (Touch On, Touch Off) • Constant On (Touch On) touch again for off • Strobe (Triple Tap Strobe On, Touch Once Off) • Low battery indication – double flash after 5 sec., double flash every 15 sec. thereafter The Xiphos NT is a 3-volt rail-mounted LED pistol light boasting over 65 lumens of blinding white led light at.full power. The digitally controlled “smart” circuitry has been programmed to perform different useful functions while at the same time allowing ease of use, under duress, by the end user. These functions include the same “strobing” feature as on the Night-Ops Gladius enabling the user to disorient a potential adversary and/or “visually distort” the perception of what a potential adversary observes. The “smart” circuitry has been programmed to optimize light output for the entire life of the battery giving an incredible 2 + hours of continuous light output. The Xiphos NT is designed to be activated with a single hand OR both hands using the ambidextrous digital pressure switch.

NEW!

ALLY PL3 XTR

ALLY PL3 XTR 75FL010BK Wt. w/o batteries: 3.5 oz. / 99 grams Wt. w batteries: 4.7 oz. / 133 grams Length: 5.25” / 133 mm Output: 120 lumens Max. Diameter: 1.125” / 29 mm Battery Type: CR123A x 2 Run Time: 1 hour Bulb Type: 3-watt CREE™ LED

152

The Ally™ PL-3 XTR is the next generation of the Ally PL3. Boasting more light output than any light of its size in the market it utilizes the latest generation 3-watt CREE™ and produces an amazing 120 lumens which is a 60% increase in light output from the Ally PL3. This light can be utilized as either a high output tactical light or a great all-purpose hunting / outdoor / personal carry light. Producing the same amount of light output as an 11 “D” cell flashlight and has the capability of illuminating objects or targets up to 100 meters away. Digitally controlled, this lighting tool performs at full brightness for 1 hour and medium brightness for 2-3 hours of additional light output.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! BLADES™ THE BHB40™ Designed for both utility and tactical applications, the BHB40 is an outstanding combination of performance and value. Its stout, ergonomic handle features solid 420J stainless steel liners nested into textured, injection-molded nylon handle scales. The BHB40’s distinctive drop-point tanto blade is ground from 9Cr13CoMoV stainless steel and features a unique slotted hole that balances a slim design package with positive one-handed opening. A strong lock back locking mechanism and four-position pocket clip complete the package and ensure that the knife is completely ambidextrous in every detail. SPECIFICATIONS: ! NEW • Blade Length: 3.750” • Overall Length: 8.850” • Blade Material: 9Cr13CoMoV stainless steel • Blade Finish: Matte stonewashed • Edge type: Plain or partially serrated • Handle Material: 420J stainless steel liners nested in injection-molded nylon scales • Pocket Clip: Right or left-side, tip-up or tip-down carry THE BHB40™ 154001SL 154011SL

Plain Serrated

Glass breaker

BLACKHAWK! BLADES™ THE HAWKHOOK™ Being prepared means having the right tool at the right time. And with BLACKHAWK!’s new HawkHook™,having a versatile rescue tool with you 24/7 has never been so convenient or affordable. Extremely compact and easily carried, the HawkHook™ features a folding blade that includes a recessed cutting edge (to safely cut seat belts, parachute cord, and webbing), a straight serrated cutting edge, a glass breaker, a flat screwdriver/pry tip, a bottle opener, and a wire stripper. The multi-function blade locks open via a stout frame-lock mechanism in the handle, which consists of mated solid stainless steel panels and a textured plastic scale for a secure grip. Best of all, the unique glass breaker design on this tool is intended to be used with a hammer-like motion that keeps your hands away from the sharp glass during window breaching. SPECIFICATIONS: • Blade Length: 2.250” • Overall Length: 3.2500” • Blade Material: AUS8A stainless steel • Blade Finish: Matte bead-blast finish • Edge type: Combination plain/partially serrated • Handle Material: 420J stainless steel with textured plastic scale • Pocket Clip: Right side, tip-down carry THE HAWKHOOK™ 15HH11SL Serrated

Head Office: 1-866-652-2877

West: (604) 526-1631

Recessed seat belt/cord cutter Serrated cutting edge Wire stripper

Bottle opener

Ambidextrous thumb stud

Frame lock locking mechanism

The unique glass breaker design allows it to be used like a hammer, keeping the user's hand safely away from the glass. Prairies: 1-866-652-2877

Flat screwdriver/ pry tip

East: 1-877-993-9968

153

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! BLADES™ THE XSF PUNCH DAGGER™ The amazing strength and penetration power of the Besh Wedge™ blade profile make it a natural choice for thrust-oriented knife designs. Our “Punch Dagger” combines the Besh Wedge with a distinctive handle shape that allows it to be braced against the palm like a traditional push dagger design or guided by the index finger like a classic Indonesian rencong (pistol-grip knife). This exceptionally ergonomic design offers incredible thrusting power and penetration, even through heavy clothing. Zero ground from AUS8A stainless steel, Teflon® coated, and complete with an injection-molded nylon neck sheath with chain, the Besh Punch Dagger is an incredibly potent personal defense tool that you can’t afford to be without. SPECIFICATIONS: • Blade Length: 3.850” • Overall Length: 5.275” • Blade Material: AUS8A stainless steel • Blade Finish: Black Teflon® coating • Edge type: Zero-ground plain edge • Handle Material: Textured G-10 • Sheath: Injection-molded nylon with neck chain THE XSF PUNCH DAGGER™ 15PD00BK Plain

! NEW

BLACKHAWK! BLADES™ SILENT PARTNER Designed by noted custom knife maker Howard Viele, the Silent Partner combines the compactness of a gentleman's pocketknife with the strength and reliability of a purpose-designed tactical tool. Built on a framework of solid stainless steel handles and textured G-10 handle slabs, its blade locks open via a rugged integral frame-lock mechanism. Its hollow-ground drop-point blade is precision machined from tough 440C stainless steel and features both an ambidextrous thumb stud and an index finger “flipper” to ensure rapid and reliable one-handed openings. SPECIFICATIONS: • Blade Length: 3.200" • Overall Length: 7.750" • Blade Material: 440C stainless steel • Blade Finish: Bead-blasted matte finish • Edge type: Plain or partially serrated • Handle Material: Stainless steel with textured G-10 scales • Pocket Clip: Right side tip-down carry

SILENT PARTNER 15SP01SL Plain Serrated 15SP11SL

154

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! BLADES™ THE GARRA II™ The Garra II is an evolution of the original BLACKHAWK! Caracara and Garra designs, tuned for optimum performance by edged-weapons expert Michael Janich. Built on a framework of 420J stainless steel liners, it features a high-strength liner-lock mechanism, textured G-10 handles, and an aggressively curved AUS8A stainless steel blade. Its contoured handle shape boasts improved ergonomics to support a wider variety of grip styles and maximize the knife’s ballistic cutting power and weapon-retention characteristics. An enhanced point angle also makes it suitable for both cutting and thrusting, making it one of the most versatile hawkbill knives available. SPECIFICATIONS: • Blade Length: 3.000” • Overall Length: 7.400” • Blade Material: AUS8A • Blade Finish: Black Teflon® coating • Edge type: Plain or partially serrated • Handle Material: 420J stainless steel liners nested in textured G-10 scales • Pocket clip: Right-side tip-down carry only THE GARRA II™ 15G201BK 15G211BK

! NEW Plain Serrated

BLACKHAWK! MOD MPAK™-MILITARY PERSONNEL AUTOMATIC KNIFE™ The MPAK is a purpose-designed automatic knife tailored to meet the demanding needs of law enforcement and military personnel. Available with either a Japanese tanto or spear point fighter blade, it features a CNC-machined, Milspec-anodized aircraft aluminum handle and four-position spring steel pocket clip. Redesigned for 2008 to further optimize its performance, its improved features include:

TANTO

• Upgraded CPM154 stainless steel blade • Re-engineered button-lock mechanism for enhanced strength and durability • Hardened internal blade stop pins • Improved secondary safety • Tungsten DLC-coated Torx® clip screws An exceptional synthesis of style and performance, the MPAK is the ideal choice for serious duty.

FIGHTER

SPECIFICATIONS: • Blade Length: 3.750” • Overall Length: 8.750” • Blade Material: CPM154 High-Carbon Stainless Steel Alloy • Blade Finish: Black Tungsten DLC Coating • Edge type: Plain or partially serrated • Handle Material: Milspec anodized aircraft aluminum • Optional Accessories: Ballistic nylon belt pouch available free of charge upon request with return of MOD warranty card. *The new versions of the MPAK will be available only upon depletion of stock of the previous version

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

MPAK 78-7 MPAK-TPA MPAK-TSA 78-8 MPAK-FPA 79-7 MPAK-FSA 79-8 NSN# 1095-01-521-9358

East: 1-877-993-9968

Tanto Tanto Fighter Fighter

Plain Edge Auto Serrated Edge Auto Plain Edge Auto Serrated Edge Auto

155

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! MOD THE CQD MARK I ®

With thousands in service all over the globe, the award-winning CQD® Mark I has been the flagship of the MOD line since its introduction. Now, based on feedback from countless users, we have taken this field-proven design and made it even better. Every Mark I still features meticulously machined aircraft aluminum handles, a recessed seatbelt/cord cutter, and a carbide glass breaker. However, the new, improved versions now also boast the following enhanced features: • Upgraded CPM154 stainless steel blade • Improved edge geometry for better cutting performance • Re-engineered button-lock mechanism for enhanced strength and durability • Hardened internal blade stop pin • Elimination of thumb studs on automatic models • Integral EDM-machined texture panels instead of “wingwalk” • Improved secondary safety • Tungsten DLC-coated Torx® clip screws Available in both manual and automatic versions, the Mark I still sets the standard in versatility and performance in professional-grade tactical folding knives.

MARK I - SERRATED

SPECIFICATIONS: • Blade Length: 3.750” • Overall Length: 9.500” • Blade Material: CPM154 High-Carbon Stainless Steel Alloy • Blade Finish: Black Tungsten DLC Coating • Edge type: Plain or partially serrated • Handle Material: Milspec anodized aircraft aluminum with integral EDM-textured panels • Optional Accessories: Folding spike assembly (210) and replacement support blade kit (260) • Note: The new versions of the Mark I will not fit in the optional injection-molded nylon sheath (200) *The new versions of the Mark I will be available only upon depletion of stock of the previous version

MARK I NEW IMPROVED DESIGN! 70-3 Plain Edge 70-4 Serrated Edge NSN #1095-01-520-5900 70-7 Plain Edge Auto Serrated Edge Auto 70-8 NSN# 1095-01-520-5903

156

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! INTEGRATED TOURNIQUET SYSTEM (I.T.S.) The rules have changed. With the advent of body armor, the most common cause of preventable deaths in the tactical environment can be attributed to rapid loss of blood due to extremity wounds. A major artery wound can cause the victim to go unconscious in two minutes and bleed out seconds later. If life saving devices like pressure cuffs or tourniquets are available the question becomes how do you locate and apply them to yourself, or your team members, in these critical few seconds. The BLACKHAWK! Integrated Tourniquet System (I.T.S.) integrates four tourniquets in the pants and four tourniquets in the shirt. They are correctly positioned and oriented to the upper and lower extremities for immediate access under existing gear and can be operated by the wearer, a buddy, or a medic.

“

SIXTY PERCENT OF PREVENTABLE COMBAT DEATHS ARE FROM EXTREMITY BLEEDING AND 50-70% OF ALL COMBAT INJURIES ARE EXTREMITY WOUNDS

”

MEETS THE 8 UNITED STATES ARMY INSTITUTE OF SURGICAL RESEARCH (USAISR) REQUIREMENTS: 1. Less than 280 gram total weight 2. Minimum 1” strap width 3. Application in less than 1 minute 4. Easy release and reapplication 5. One handed self application to upper extremity 6. Application to trapped limb 7. Protection from over tightening 8. Cost not to exceed $25 per unit Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

I.T.S. offers proximal (femoral artery) and distal (tibial artery) protection on both right and left legs

East: 1-877-993-9968

157

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! INTEGRAL TOURNIQUET SYSTEM (I.T.S.) PANTS The Warrior Wear Integral Tourniquet System (I.T.S.) Pants provide lifesaving aid in the field and on the streets. Regardless of preparation accidents can happen. The BLACKHAWK! I.T.S Pants provide comfort and durability to meet the demands of the modern day warrior along with immediate lifesaving aid when needed.

4 INTERNAL TOURNIQUETS IN ONE PAIR OF PANTS! I.T.S. located on both upper thighs and lower legs

2 1

I.T.S. shown activated I.T.S. shown closed I.T.S. BENEFITS • Always present • Single handed application • Flip pull twist activation • Safe and secure lock down • Activate in seconds • Complete occlusion of blood • Ability to train to build muscle memory • Combined weight is less than one traditional tourniquet • Useful in training scenarios and can be reactivated multiple times

BLACKHAWK! TACTICAL I.T.S. PANTS 87IT01BK Tactical I.T.S. Pants 87IT01KH Tactical I.T.S. Pants

158

4 3

Black Khaki

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

速

Gear & Products by BLACKHAWK!速速

BLACKHAWK! INTEGRATED TOURNIQUET SYSTEM (I.T.S.) SHIRT The Warrior Wear Integrated Tourniquet System (I.T.S.) Shirt provide lifesaving aid in the field and on the streets. Regardless of preparation accidents can happen. The BLACKHAWK! I.T.S. Shirt provide comfort and durability to meet the demands of the modern day warrior along with immediate lifesaving aid when needed.

4 INTERNAL TOURNIQUETS IN ONE SHIRT! I.T.S. located on both sleeves on upper arms and wrists 1 2

Storage pocket on the outside Lift to reveal I.T.S. 3

The I.T.S. Tactical Shirt retains many of the features from the standard Tactical Shirt Zippered waistband pocket

Elastic cord loop

I.T.S. offers a primary protection for the brachial artery and distal placement at the wrist on both right and left sleeve. Lower tourniquet can be adjusted to the wound site. BLACKHAWK! TACTICAL I.T.S. SHORT SLEEVE SHIRT 87IT02BK Tactical I.T.S. Shirt Black 87IT02KH Tactical I.T.S. Shirt Khaki

Concealed collar Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

159

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! WARRIOR WEAR PERFORMANCE POLO SHIRT Our Warrior Wear Performance Polo Shirt features contemporary styling and comfort. Great for everyday wear on or off the job.

1 3

Available in Black, Silver Tan, and Navy FEATURES: • Lightweight wrinkle, fade, and stain resistant anti-microbial fabric • Raglan style sleeves allow comfortable range of motion 1 2 3 4

Flat-knit collar with anti-roll inserts Hanging loop on placket can be used to hang sunglasses or other items Media player pocket on upper-left shoulder features a button hole for cord routing underneath collar and can also be buttoned down to secure valuable items Hidden button placket with durable rubberized buttons

Available in sizes SM – 3XL BLACKHAWK! PERFORMANCE POLO Performance Polo 87PP01BK 87PP01NA Performance Polo Performance Polo 87PP01ST

160

Black Navy Silver Tan Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! WARRIOR WEAR COTTON POLO SHIRT Our Warrior Wear Cotton Polo Shirt has classic styling with contemporary features. Great for wear in the field, on the range, or in the office.

Available in Silver Tan, Navy, and Black FEATURES: • Constructed of fade-resistant 7 ounce pima cotton, pique knit • Great for use as a Class B uniform shirt 1 Hanging loop on placket can be used to hang sunglasses or other items 2 Hidden button placket with durable rubberized buttons 3 Flat-knit ribbed collar with anti-roll inserts 4 Media Player Pocket on upper-left shoulder features a button hole for cord routing underneath collar and can also be buttoned down to secure valuable items Available in sizes SM – 3XL BLACKHAWK! COTTON POLO Cotton Polo 87CP01BK 87CP01NA Cotton Polo Cotton Polo 87CP01ST

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Black Navy Silver Tan

161

BLACKHAWK!

Gear & Products by BLACKHAWK!®

Roll-up sleeves with button fastener

Elastic cord loop on pocket flap can be used to hang sunglasses or pens.

Convenient cell phone “drop-in” slot with catch pocket Additional zippered pocket hides below waistband when shirt is tucked in.

Hidden zipper pocket underneath chest pocket secures important items. Available in sizes SM – 3XL BLACKHAWK! TACTICAL SHIRT (LONG SLEEVE) Tac Shirt Long Sleeve 87TS01BK 87TS01KH Tac Shirt Long Sleeve 87TS01NA Tac Shirt Long Sleeve 87TS01OD Tac Shirt Long Sleeve

BLACKHAWK! TACTICAL SHIRT (SHORT SLEEVE) 87TS02BK Tac Shirt Short Sleeve Tac Shirt Short Sleeve 87TS02KH 87TS02NA Tac Shirt Short Sleeve 87TS02OD Tac Shirt Short Sleeve

162

Black Khaki Navy Olive Drab Gusseted underarm for increased mobility

Black Khaki Navy Olive Drab Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! WARRIOR WEAR TACTICAL PANTS SIZING CHART

INSEAM (INCHES)

WAIST (INCHES) 28

UH*

*UH = un-hemmed

Even waist sizing 28” – 44”, inseams of 30”, 32”, 34” and 36” Even waist sizing 46” – 54”, un-hemmed, 39” inseam. Does not include cuff reinforcement. BLACKHAWK! TACTICAL PANTS 87TP01BK Tactical Pants 87TP01KH Tactical Pants Tactical Pants 87TP01NA 87TP01OD Tactical Pants

Available in Olive Drab, Navy, Khaki, and Black

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Black Khaki Navy Olive Drab

163

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! WARRIOR WEAR TACTICAL PANTS

FEATURES: • Durable wrinkle, fade, and stain resistant 8.5 ounce cotton canvas • Double layering in the seat and knees for increased wear and protection • Crotch gusset allows increased movement

Our Warrior Wear Tactical Pants are rugged and loaded with features not found on other tactical pants. PATENTS PENDING

Extra-wide reinforced belt loops accommodate BLACKHAWK! CQB Rigger Belt (and other belts up to 1.75” wide)

Hidden expandable waistband slides for increased mobility and comfort

Silicone grip strip in waistband keeps shirt tucked in during extreme maneuvers

3 6

5 4

S.T.R.I.K.E.™ webbing for BLACKHAWK! modular attachments pocket keeps valuable items secure

“Angle-cut” hand pockets have flat edges for proper placement and orientation of knives, pens, etc.

Each leg has an easy-access, top-opening mag pouch

Large top-opening cargo pockets on each leg with elastic webbing inside to secure and properly orient up to three automatic weapon mags

Zippered rear hip pocket keeps wallet secure, out of the way, and separate from large rear pockets

11 11

164

Head Office: 1-866-652-2877

550 cord loop on front waistband allows attachment of carabiners and other items

Hidden zipper pocket behind right hand Reinforced hems on leg cuffs for increased durability

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! WARRIOR WEAR JACKET SYSTEM The Warrior Wear Jacket System consists of 3 garments designed to be used separately or layered in combination to achieve the desired level of element protection. Performance is second to none. Each layer features a contemporary design using performance fabrics, quality components, and advanced construction techniques. Jackets sold separately only.

TRAINING JAK-LAYER 1

Our Training Jacket is ideal for cool weather outings and rigorous physical activity. The two-way stretch woven shell with raglan cut provides excellent range of motion as well as wind and water resistance.

Shoulder stash pocket with cord routing hole holds portable media player or identification

• Breathable 3-layer laminate water-resistant shell with brushed lining • Comfortable micro-fleece brushed tricot collar lining with chin flap • YKK® center front zipper with semi-auto locking slider • Hidden barrel-lock adjustable waist cinch • Shoulder stash pocket with cord routing hole holds portable media player or identification • May be worn underneath the Ops Jak and/or Element Shell for layered protection

Available in Black and Foliage Green Available in sizes SM – 3X

! NEW

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

BLACKHAWK! TRAINING JAK LAYER 1 82TJ00BK Training Jak Layer 1 Training Jak Layer 1 82TJ00FG

East: 1-877-993-9968

Black Foliage Green

165

BLACKHAWK!

Gear & Products by BLACKHAWK!®

OPS JAK-LAYER 2 The Ops Jak is loaded with features and provides substantial warmth and element protection in a lean, high-speed package. This jacket looks as good as it performs.

Zippered tailbone pocket

Available in Black and Foliage Green Available in sizes SM – 3X

• Durable Water-Resistant (DWR) soft-shell with sealed outer seams • Elbow/forearm scuff panels protect shell fabric in high contact areas • Brushed tricot/brushed mesh inner lining and collar • YKK® center front zipper with semi-auto locking slider, wind-proof back-flap and chin flap • Hidden locking draw cord waist adjustment in hand pockets • Easy access YKK® waterproof zipper sealed outer pockets • 2 hand pockets • 1 breast pocket • Large rear “tailbone” pocket with left or right access • 3 large YKK® zipper-top interior pockets

! NEW BLACKHAWK! OPS JAK LAYER 2 82OJ00BK OPS Jak Layer 2 OPS Jak Layer 2 82OJ00FG

166

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

Black Foliage Green East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

ELEMENT SHELL OUTER-LAYER 3 Enjoy complete weather protection from our Element Shell, featuring a water and wind proof, breathable 3-layer laminate hard-shell and 100% interior sealed seams. Adjustable cuffs, waistband, and bottom hem help to seal out the elements. May be worn over the Training Jak and/or Ops Jak when additional warmth is needed. • YKK® waterproof zipper sealed external pockets • YKK® waterproof, adjustable pit-zips for ventilation • Drawstring adjustable waist and bottom hem to keep out elements • Comfortable fleece-lined collar and chin flap • Waterproof center front storm flaps with dual direction YKK® zipper can be opened from top or bottom • Rugged face fabric in high abrasion areas • Stow-away hood features interior sealed seams, extended visor, and barrel-lock adjustments for the face opening and crown

Stow-away hood

YKK® waterproof, adjustable pit-zips for ventilation

Available in Black and Foliage Green Available in sizes SM – 3X

! NEW BLACKHAWK! ELEMENT SHELL OUTER LAYER 3 82ES00BK Element Shell Layer 3 Black 82ES00FG Element Shell Layer 3 Foliage Green

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

167

BLACKHAWK!

Gear & Products by BLACKHAWK!®

NEW ! R COLO

BLACKHAWK! LOW PROFILE LOGO CAP FEATURES: • Low profile design • Structured bill • Adjustable strap fits wide range of sizes • Available in Black, Olive Drab, and Coyote Tan

BLACKHAWK! LOW PROFILE LOGO CAP 90BC09BK Low Profile Cap 90BC09OD Low Profile Cap 90BC09DE Low Profile Cap

Black Olive Drab Desert Tan

BLACKHAWK! CONTRACTOR CAP BLACKHAWK!’s Warrior Wear Contractor cap is designed to comply with the U.S. Department of State mandate on clothing for contractors working abroad. Loop attachment patches on the side, back, and top allow easy and secure placement of a flag, name badge, and glint tape. Comfortable and easy to use hook and loop adjustment strap accommodates a wide variety of users. Available in Khaki or Foliage Green. For a complete selection of patches, check out page 347. Glint tape mount

Name or blood type mount

! NEW

Patches sold separately

BLACKHAWK! CONTRACTOR CAP Contractor Cap 90BC10FG 90BC10KH Contractor Cap

168

Head Office: 1-866-652-2877

West: (604) 526-1631

Foliage Green Khaki Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

The Omega Elite™ series of tactical vests consists of combat-proven configurations that have been updated through design improvements. Increased R&D efforts, and the much valued input of our customers have enabled us to greatly enhance the efficiency and comfort of these products.

MORE FEATURES AND BENEFITS THAN OTHER VESTS!

• PADDED HAWKTEX™ SNIPER SHOULDER ON BOTH SIDES FOR A FULLY AMBIDEXTROUS VEST

BLACKHAWK!® SIDE RELEASE BUCKLES ON FRONT CLOSURE FOR FAST AND SECURE DONNING OF THE VEST, IN ADDITION TO #9YKK® ZIPPER

A BUILT-IN SHOULDER ADJUSTMENT ALLOWS FOR QUICK REMOVAL OF THE VEST WITH ONE PULL OF ADJUSTMENT TABS ON EACH SHOULDER

MORE FEATURES AND BENEFITS: • Emergency cut away shoulder strap system • Shoulder adjust allows user to size vest through a 6-in range of height adjustment for maximum comfort and fit • Hydration pouch features an access port to allow ambidextrous routing of drink tube between layers of vest to either shoulder. Gives user more options for tube routing and also gives protection to tube from snagging or damage • Larger metal color matching D-Rings on shoulder to allow routing/storage of BLACKHAWK! Hydration drink tube and bite valve. • S.T.R.I.K.E./MOLLE webbing on shoulders for attachment of a radio pouch for quick and easy exchange of critical information • Ladder lock buckles on each side allow for quicker adjustment through an incredible range of 32 inches for customized it and maximum comfort • Reinforced drag handle on upper back of vest for dragging injured personnel out of harm’s way • Exterior reinforcing layer of 1000 denier NyTaneon® to support heavier loads Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

169

BLACKHAWK!

Gear & Products by BLACKHAWK!®

ΩMEGA ELITE TACTICAL VEST ™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for a fully ambidextrous vest • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Adjustable flap magazine pouches for tall or short magazines • Two horizontal accessory pouches • Six M-16/M4 magazine pouches hold 12 magazines • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (not included) ΩMEGA ELITE™ TACTICAL VEST 30EV03BK Black 30EV03DE Coyote Tan 30EV03OD Olive Drab EMERGENCY DITCH/CUT AWAY SHOULDER STRAPS

ΩMEGA ELITE VEST CROSS/DRAW PISTOL MAG ™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Side ladder-lock buckles allow for quick girth adjustment • Emergency cut away shoulder strap system and robust drag handle • #10 YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for a fully ambidextrous vest • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Cross draw holster secured by an adjustable side release buckle • Shoulder D-rings for accessory attachment • Four pistol magazine pouches • One horizontal accessory pouch • Three M-16/M4 pouches hold six magazines • Belt loops secure vest to any web belt (not included) ΩMEGA ELITE™ VEST CROSS/DRAW PISTOL MAG 30EV26BK Black 30EV26BK-LEFT Black Left Coyote Tan 30EV26DE 30EV26DE-LEFT Coyote Tan Left Olive Drab 30EV26OD Olive Drab Left 30EV26OD-LEFT

170

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! ΩMEGA CROSS DRAW/PISTOL MAG VEST ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for a fully ambidextrous vest • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Cross draw holster secured by an adjustable side release buckle • Adjustable flap magazine pouches for tall or short magazines • Shoulder D-rings for accessory attachment • One compass /strobe/ GPS / small radio pouch on shoulder • Four pistol magazine pouches • One horizontal accessory pouch • Three M-16/M4 pouches hold six magazines • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (not included) ΩMEGA™ CROSS DRAW/PISTOL MAG VEST 30VT26BK Black NSN# 8415-01-517-6322 30VT26BK-L Left Black 30VT26DE Coyote Tan NSN# 8470-01-520-5936 30VT26OD Olive Drab

BLACKHAWK! ΩMEGA CROSS DRAW/EOD VEST ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for secure rifle seating • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Cross draw holster secured by an adjustable side release buckle • Shoulder D-rings for accessory attachment • One compass /strobe/ GPS / small radio pouch on shoulder • Four large utility pouches • Horizontal pistol magazine / flashlight / knife pouch • Two hook & loop strip for ID patches • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (not included) ΩMEGA™ CROSS DRAW/EOD VEST Black 30VT25BK

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

171

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! ΩMEGA TACTICAL VEST-CROSS DRAW ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for secure rifle seating • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Cross draw holster secured by an adjustable side release buckle • Adjustable flap magazine pouches for tall or short magazines • Shoulder D-rings for accessory attachment • One compass /strobe/ GPS / small radio pouch on shoulder • Two utility pouches • Three M-16/M4 pouches hold six magazines • Hook & loop strip for ID patch • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (not included) ΩMEGA™ TACTICAL VEST-CROSS DRAW 30VT09BK Black 30VT09DE Coyote Tan 30VT09OD Olive Drab

BLACKHAWK! ΩMEGA TAC VEST - EOD ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for secure rifle seating • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Adjustable flap magazine pouches for tall or short magazines • Shoulder D-rings for accessory attachment • One compass /strobe/ GPS / small radio pouch on shoulder • Three M-16/M4 pouches hold six magazines • Four horizontal accessory pouches • Horizontal pistol magazine / flashlight / knife pouch • Hook & loop strip for ID patch • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (not included) ΩMEGA™ TAC VEST-EOD 30VT05BK Black 30VT05DE Coyote Tan Olive Drab 30VT05OD

172

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

ΩMEGA ELITE PHALANX HSD VEST ™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for a fully ambidextrous vest • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Adjustable flap magazine pouches for tall or short magazines • Three horizontal accessory pouches • Three horizontal pistol magazine / flashlight / knife pouch • Three M-16/M4 magazine pouches hold six magazines • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (belt not included) ΩMEGA ELITE™ PHALANX HSD VEST 30EV35BK Black

BLACKHAWK! ΩMEGA PHALANX HOMELAND SECURITY VEST ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulders for a fully ambidextrous vest • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Shoulder D-rings for accessory attachment • Two M-16/M4 pouches hold 4 magazines (one has a securing cord for a radio) • Double pistol magazine pouches with adjustable lids • 14-round shotshell pouch • Pouches for flashbangs, handcuffs, O.C. spray, and tactical light • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (belt not included)

ΩMEGA™ PHALANX HSV 30VT35BK Black

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

173

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! ΩMEGA ELITE TACTICAL VEST EOD ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for a fully ambidextrous vest • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Adjustable flap magazine pouches for tall or short magazines • Four Horizontal accessory pouches • Pistol magazine/flashlight pouch • Three M-16/M4 magazine pouches hold six magazines • Hook & loop strip for ID patch • Heavy duty STRIKE/MOLLE webbing on back for attaching additional pouches • Belt loops secure vest to any web belt (not included) ΩMEGA ELITE™ TACTICAL VEST EOD 30EV05BK Black 30EV05DE Coyote Tan

BLACKHAWK! ΩMEGA TACTICAL VEST-1 ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for secure rifle seating • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Adjustable flap magazine pouches for tall or short magazines • Shoulder D-rings for accessory attachment • One compass/strobe/ GPS / small radio pouch on shoulder • Two horizontal accessory pouches • Six M-16/M4 magazine pouches hold twelve magazines • Hook & loop strip for ID patch • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (not included) ΩMEGA™ TACTICAL VEST Black 30VT03BK 30VT03DE Coyote Tan 30VT03OD Olive Drab

174

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! ΩMEGA TAC VEST SHOTGUN/RIFLE ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for secure rifle seating • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Adjustable flap magazine pouches for tall or short magazines • Holds 28 shotshells in two pouches • One horizontal accessory pouch • Three M-16/M4 pouches hold 6 magazines • Shoulder D-rings for accessory attachment • Hook & loop strip for ID patch (patch not included) • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (not included)

ΩMEGA™ SHOTGUN/RIFLE VEST 30VT31BK Black

BLACKHAWK! ΩMEGA TACTICAL VEST MEDIC/UTILITY ®

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Shoulder D-rings for accessory attachment • Eight utility pouches for medical supplies and gear • Hook & loop strip for ID patch • Heavy duty webbing on back for attaching duty pouches or gear with A.L.I.C.E. Clips • Belt loops secure vest to any web belt (not included) ΩMEGA™ TACTICAL VEST MEDIC/UTILITY 30VT08BK Black 30VT08OD Olive Drab

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

175

BLACKHAWK!

Gear & Products by BLACKHAWK!®

S.T.R.I.K.E. ΩMEGA VEST ™

™

• Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Lace style girth adjustment • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for a fully ambidextrous vest • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Shoulder D-rings for accessory attachment • STRIKE/MOLLE webbing on front and back for attaching pouches or gear - See STRIKE section for all options • Belt loops secure vest to any web belt (not included) S.T.R.I.K.E.™ ΩMEGA™ VEST 37CL36BK Black 37CL36CT Coyote Tan 37CL36OD Olive Drab 37CL36AU ARPAT

POUCHES NOT INCLUDED

NSN# 8470-01-517-6331

™

S.T.R.I.K.E. - ELITE VEST • Made of heavy-duty nylon mesh for maximum breathability • Adjustable for length and girth; up to 6” length, add’l 32” girth • Side release buckle / web style girth adjustment • Emergency cut away shoulder strap system and robust drag handle • #10YKK® Vislon® zippers; side release buckles for rapid wear • Padded HawkTex™ Sniper Shoulder for a fully ambidextrous vest • Two large internal zippered map pouches • Interior BLACKHAWK! Hydration reservoir pocket (reservoir not included) • Shoulder D-rings for accessory attachment • STRIKE/MOLLE webbing on front and back for attaching pouches or gear - See STRIKE section for all options • Belt loops secure vest to any web belt (belt not included) S.T.R.I.K.E.™ - ELITE VEST 37CL66BK Black 37CL66CT Coyote Tan 37CL66OD Olive Drab 37CL66AU ARPAT

POUCHES NOT INCLUDED

176

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK!® KNOXX SPECOPS STOCK™ From the longest arm of the law to the shortest, the popular SpecOps Stock™ is instantly adjustable to fit any shooter. With over 4 inches of adjustment, this is a stock that the entire department can use comfortably in any application and with any load. This patented Knoxx recoil-reducing stock will revolutionize the way you think about shotguns. Utilizing dual Knoxx recoilcompensating systems, the SpecOps Stock™ has the ability to reduce felt recoil of even the most potent loads by up to 95%. The SpecOps Stock™ makes even the heaviest loads easy for all shooters to handle! The SpecOps’ polymer and alloy construction makes it durable, reliable and built to last. Also, the unique features and design of this pistol grip style stock allows law enforcement agencies and military personnel the ability to use their shotguns with all loadbearing and ballistic tactical vests. Designed to fit any and all shooters, and practically devoid of recoil, the SpecOps Stock™ is the most popular of the Knoxx line of recoil-reducing products. Not only is it utilizing two recoilabsorbing mechanisms to soak up recoil, it also adjusts to fit any shooter regardless of the situation or application. Hunters and competitive shooters will find their scores and hit ratios improving as flinching and recoil anticipation dramatically decreases. SpecOps Stock™ Unique Features Include: • Instantly adjustable stock to fit all shooters • 11.25 to 15.25-inch length-of-pull (The butt pad must be removed to obtain the shortest LOP) • Perfect fit with load-bearing and ballistic tactical vests. • Dual recoil compensation systems eliminate harsh recoil with all loads • Unique design cuts muzzle rise - Back on target faster • Eliminate shoulder fatigue and related recoil injuries

SPECOPS STOCK™ ADJUSTABLE SHOTGUN STOCK K04100-C REMINGTON 870 12 GAUGE - ALL VARIETIES K04200-C MOSSBERG 12 & 20 GAUGE FITS MOSSBERG® MODELS 500, 590, 835, 88

K04300-C K04400-C

WINCHESTER® 12 & 20 GAUGE REMINGTON® 20 GAUGE & SELECT PUMP/SEMI RIFLES FITS REMINGTON MODELS 870 20-gauge & 7400, 7600, 7615, 740, 760, 750 RIFLES

SPECOPS STOCK™ ADJUSTABLE SHOTGUN STOCK - MOSSY OAK® K04101-C REMINGTON® 870 12 GAUGE - ALL VARIETIES K04201-C MOSSBERG® 12 & 20 GAUGE FITS MOSSBERG MODELS 500, 590, 835, 88

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

177

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK!® KNOXX BREACHERSGRIP™ RECOIL REDUCING PISTOL GRIP Based on the highly effective SpecOps Stock™, this shotgun pistol grip cuts recoil in half and makes firing breaching rounds or heavy loads painless and easy. This product is so effective in reducing painful recoil that a BreachersGrip™-equipped shotgun can be used effectively one-handed, even with magnum loads. Ideal for home defense or close quarters combat, the BreachersGrip™ is available for most Remington®, Winchester®, Mossberg® and FN® series pump shotguns. Attach a sling and your shotgun is ready when you need it or out of the way when you don’t.

BreachersGrip™ Unique Features Include: • Greatly reduces painful recoil • Compact design for easy storage • Quick to deploy BREACHERSGRIP™ RECOIL REDUCING PISTOL GRIP K02100-C REMINGTON® 870 12 GAUGE - ALL VARIETIES K02200-C MOSSBERG® 12 & 20 GAUGE FITS MOSSBERG® MODELS 500, 590, 835, 88 K02300-C WINCHESTER® 12 & 20 GAUGE K02400-C REMINGTON 20 GAUGE & SELECT PUMP/SEMI RIFLE FITS REMINGTON MODELS 870 20-gauge & 7400, 7600, 7615, 740, 760, 750 RIFLES

BLACKHAWK!® KNOXX SPECOPS FOLDER™ Based on the highly acclaimed Knoxx SpecOps Stock™, this sleek folding pistol grip stock takes the pain out of shooting magnum buckshot and slug loads, even with the stock folded. The sturdy soft-rubber coated folding wire-frame stock with integral rubber butt pad is easily folded over the top of the receiver. This allows for compact storage and increased maneuverability in tight spaces, such as vehicles, motorcycles, hallways and entryways. The SpecOps Folder™ pistol grip contains the unique Knoxx recoil-reducing mechanism. The patented recoil-reducing mechanism reduces muzzle flip in addition to taming recoil. Shooters testing the SpecOps Folder™ with Magnum Buckshot loads have found that there is very little discernible recoil in either open or folded positions, with virtually no muzzle flip. The patented Knoxx SpecOps Folder™ shotgun stock cuts perceived felt recoil by over 65%. SPECOPS FOLDER™ SHOTGUN STOCK K01100 REMINGTON® 870 12 GAUGE - ALL VARIETIES K01200 MOSSBERG® 12 & 20 GAUGE FITS MOSSBERG® MODELS 500, 590, 835, 88 K01300 WINCHESTER® 12 & 20 GAUGE K01400 REMINGTON® 20 GAUGE & SELECT PUMP/SEMI RIFLES FITS REMINGTON MODELS 870 20-gauge & 7400, 7600, 7615, 740, 760, 750 RIFLES

178

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK!® KNOXX AXIOM V/S RIFLE STOCK™ For the ultimate in rifle stocks, Knoxx presents the Knoxx Axiom V/S Rifle Stock™ for bolt-action rifles. This stock utilizes the SpecOps recoil-reducing stock along with a CNC-machined billet all aluminum fore-stock for the absolute maximum in accuracy and stability. Matchless in design and ergonomics, the Axiom V/S Rifle Stock™ is at home in the forest, on the competition bench or on the battlefield.

Axiom V/S Rifle Stock™ Unique Features Include: • Rugged Billet Aluminum and Fiberglass-Reinforced Polymer Construction • Instantly Adjustable Length-of-Pull from 11.25 to 15.25 Inches • Durable Black “Powder Coated” Finish on Fore-Stock • Two Recoil Suppression Devices for Maximum Recoil Reduction • Completely Free-Floated Barrel • CNC-Milled for Perfect Receiver Fit AXIOM V/S RIFLE STOCK™ K90000-B REMINGTON® 700 BDL/Short Action - ALL BARREL SIZES K90001-B REMINGTON® 700 BDL/Long Action - ALL BARREL SIZES K90500-B WTHRBY VANGUARD/HOWA 1500/Short Action ALL BARREL SIZES K90501-B WTHRBY VANGUARD/HOWA 1500/Long Action ALL BARREL SIZES

BLACKHAWK!® KNOXX AXIOM R/F RIFLE STOCK™ BLACKHAWK! presents the Knoxx® Axiom R/F™ Rifle Stock for Ruger® 10/22® rifles. This revolutionary and modern stock takes 10/22® rifles to the next level of performance, function and accuracy. The stocks design incorporates an adjustable length of pull carbine stock, a radical free float barrel channel, and durable reinforced polymer construction. The Axiom R/F™ Rifle Stock is extremely comfortable in the way it fits, feels, and adjusts to fit any size shooter.

Axiom R/F Rifle Stock™ Unique Features Include: • Durable reinforced polymer construction • Adjustable length-of-pull for proper fit and improved shooter performance (6 pos., 9.75” - 13.75“ LOP) • Completely free-floated barrel channel • Engineered & designed for precision receiver fit • Multiple ambidextrous sling mounting locations for quick detach, 1” - 1.25” slings and lanyards • Stock weight 1lbs. 9oz.

AXIOM R/F RIFLE STOCK™ K98200 RUGER® 10/22® Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

179

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! DYNAMIC ENTRY BREAK -N- RAKE

Specifically engineered for window entries, the Break -N- Rake features a laser cut hook, serrated blade and three 12” raking fins, all constructed of carbon steel. The newly reinforced hook effectively removes curtains, blinds and other obstructions, pulling them clear allowing for a safer entry. The three 12” fins on the 19.5 inch Break -N- Rake head are designed to clear glass and other debris left in the window frame. Secured to a 1.25 inch electrically non-conductive D-handle system for maximum pulling power, the Break -N- Rake is ideal for securing secondary breach locations or creating a tactical distraction. BREAK -N- RAKE DE-BR WT: 9.6 LBS. LENGTH: 51”

DE-BR

RCED REINFO GN DESI

DE-SBR

SUPER BREAK -N- RAKE DE-SBR WT: 11 LBS.

LENGTH: 69”

BLACKHAWK! DYNAMIC ENTRY MINI BREAK -N- RAKE

NEW!

Designed in conjunction with the British METRO Police, the new Mini Break -NRake is perfect for those close quarter window entries where space is at a minimum. Compact, lightweight and portable, the Mini Break -N- Rake offers features comparable with its larger counterpart in only a quarter of the size and comes equipped with an electrically non-conductive D-handle system. Ideal for quick-response Tactical and Rescue operations, the 25 inch Mini Break -NRake fits easily in the trunk of patrol or rescue vehicles or as a replacement for the Spec. Op Hallagan tool in our Tactical Backpack Kit. MINI BREAK -N- RAKE DE-MBR WT: 4.5 LBS.

LENGTH: 25”

BLACKHAWK! DYNAMIC ENTRY TACTICAL BREACHING SAW

In our attempt to meet the ever changing demands of the tactical community, Dynamic Entry has taken a page out of the Fire Department’s playbook and modified a traditional Fire and Rescue tool with Police and SWAT personnel in mind.

NEW!

At 64” in overall length, our Tactical Breaching Saw keeps the operator at a safe distance while cutting inspection holes in false ceilings, breaching lightweight metal skins (such as those found on mobile homes) or when cutting through sheetrock and other lightweight building materials. The high carbon steel head is equipped with specifically positioned cutting teeth along the underside for maximum sawing power, with a tip and sharpened edge opposite for chopping and cutting operations. The Tactical Breaching Saw comes in a sturdy sheath that protects both the operator and the tool. TACTICAL BREACHING SAW DE-TBS WT: 9.5 LBS.

180

LENGTH: 64”

Our Tactical Breaching Saw features an electrically non-conductive D-handle system with a safety-guard handgrip to reduce the possibility of the operator’s hand slipping onto the working end of the tool. Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BLACKHAWK!

Gear & Products by BLACKHAWK!® ®

BLACKHAWK! DYNAMIC ENTRY SPECIAL OPERATIONS BREACHER This new heavy duty and lightweight hallagan-style breaching device is designed for close quarter breaching situations. The Special Operations Breacher features a heat-treated stainless steel wedge with non-skid friction ridges for added stability and positioning while breaching even the most robust doors. Safety-guard handgrips reduce operator impact stress. Features an electrically non-conductive handle system. SPECIAL OPERATIONS BREACHER DE-SOB WT: 6.7 LBS.

LENGTH: 24”

BLACKHAWK! DYNAMIC ENTRY THE BREACHER This new heavy duty hallagan-style breaching device was designed for extreme breaching situations. The Breacher features a heat-treated stainless steel wedge with non-skid friction ridges for added stability and positioning while breaching even the most robust doors. Safety-guard handgrips reduce the operator’s impact stress. Features an electrically non-conductive handle system.

DE-SOB DE-TB

THE BREACHER DE-TB WT: 7.1LBS

LENGTH: 30”

BLACKHAWK! DYNAMIC ENTRY CQB RAM When door-breaching speed is required for lightweight exterior and most interior doors, the CQB is the ram of choice. The oversized control-flex handle system allows breachers to position themselves in a safer zone even in cramped breaching situations. The CQB Ram is electrically non-conductive and non-sparking. CQB RAM DE-CQB NSN# 5120-01-554-2844 WT: 23 LBS. LENGTH: 20”

BLACKHAWK! DYNAMIC ENTRY MONOSHOCK RAM The flagship of the Dynamic Entry® tool line, our Monoshock Ram is the expert breachers’ entry ram of choice. Featuring electrically non-conductive, non-sparking construction, the Monoshock Ram is incredibly durable. While raiding known or unknown explosive environments, the Monoshock Ram aids in safe operations. Its handles utilize a control-flex system that reduces impact stress to the operator. Padded quick release sling included. MONOSHOCK RAM NSN# 4210-01-517-7055 DE-MS WT: 32 LBS. LENGTH: 31.5”

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

181

BLACKHAWK!

Gear & Products by BLACKHAWK!®

BLACKHAWK! DYNAMIC ENTRY U.K. HALLAGAN TOOL Featuring a uniquely designed glass buster head for break and rake operations, both working ends of the U.K. Hallagan Tool are constructed of hardened steel for years of abuse. Its electrically non-conductive handle system with safety-guard handgrips reduces the possibility of the operator’s hands slipping onto the working ends of the bar.

U.K. HALLAGAN TOOL NSN# 4210-01-517-7056 DE-UKHT WT: 9 LBS. LENGTH: 32.5” WEDGE: 2” X 4”

SUPER HALLAGAN TOOL BLACK DE-SHTB NSN# 5120-01-554-3768 WT: 12.3 LBS. LENGTH: 31”

BLACKHAWK! DYNAMIC ENTRY SUPER HALLAGAN TOOL

Designed for durability and versatility, the Super Hallagan Tool features an electrically non-conductive and ergonomically designed handle system to ensure proper hand placement and safety. Both working ends are constructed of stainless steel with non-skid friction ridges on the face of the wedge. Available in both tactical black and high visibility yellow.

SUPER HALLAGAN TOOL YELLOW DE-SHTY WT: 12.3 LBS. LENGTH: 31”

BLACKHAWK! DYNAMIC ENTRY BOLTMASTERS The specifically heat-treated cutting edges of both the BoltMaster and the Super BoltMaster are the finest available anywhere. Both bolt cutters feature an electrically non-conductive fiberglass handle system with safety-guard handgrips. Lightweight and durable. DE-SBM

DE-BM

182

SUPER BOLTMASTER DE-SBM WT: 8 LBS.

LENGTH: 30” JAW OPENING 7/16”

BOLTMASTER DE-BM NSN# 5110-01-554-2846 WT: 5.75 LBS. LENGTH: 24” JAW OPENING 3/8” Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BODY ARMOUR

Body Armour by PROTECTIVE APPAREL CORP OF AMERICA MODULAR POUCHES PACA offers a complete line of conventional and specialized modular equipment pouches suitable to fulfill any operational and mission requirement. Pouches may be ordered to fit either of

LONG ( HOLDS 2) COMBO SIDE (HOLDS 2) SHOT SHELL (HOLDS 9)

SHOT SHELL ( HOLDS 24)

HOLSTER

Head Office: 1-866-652-2877

our two proven and durable attachment systems: Velcro® and grid-stationed snaps or "Gridlock" load-bearing webbing ( as shown on facing page).

• Durable, heavy-duty Cordura® construction • May be used with Velcro® and grid-stationed snap or "Gridlock" webbing vest attachment systems • Dual redundant snap and Velcro® closure

LONG ( HOLDS 4) SIDE (HOLDS 4)

COMBO

DOUBLE SIDE ARM (HOLDS 4)

LONG (HOLDS 2) SIDE (HOLDS 2)

Prairies: 1-866-652-2877

COMBO

LESS-THAN-LETHAL (HOLDS 2)

East: 1-877-993-9968

• 100% fire-retardant Nomex® construction

COLOURS: BLACK, NAVY, OD GREEN & WOODLAND CAMO

LONG ARM (HOLDS 2)

GRENADE FLASH BANG (HOLDS 3)

OPTIONS:

SIDE ARM ( HOLDS 2)

West: (604) 526-1631

STANDARD FEATURES:

HANDCUFFS (HOLDS 1 PAIR)

BLANK PADS (STANDARD & CUSTOM SIZES)

183

BODY ARMOUR

Body Armour by PROTECTIVE APPAREL CORP OF AMERICA MODULAR POUCHES PACA offers two extremely durable and dependable equipment pouch attachment systems on all tactical vests: Velcro速 and grid-stationed one-way snaps (shown at right) and the "Gridlock" webbing system (shown at far right)

GAS MASK

RADIO (COVERED)

184

8" X 8" UTILITY

4" X 8" UTILITY

6" X 8" MEDICAL UTILITY

TACTICAL SCABBARD

GAS MASK

HYDRATION SYSTEM

BALL GAS GRENADE (HOLDS 2)

GRENADE FLASH BANG (HOLDS 2)

Head Office: 1-866-652-2877

West: (604) 526-1631

RIFLE BUTT RETENTION (STANDARD & CUSTOM SIZES)

Prairies: 1-866-652-2877

East: 1-877-993-9968

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA concealable vests BLUE STEEL Blue Steel’s futuristic design is based on new advancements in ballistic technology and temperature regulating materials. The result – ultra modern, high performance body armor that is ahead of its time in performance but right on time in demand. Features and Benefits: • Tri-Level Temperature & Moisture Control System • Ultra lightweight and breathable, Blue Steel’s specially engineered outer-shell provides a high rate of air transmission for absolute comfort. • Smart Fabric Technology™ (SFT) inner-shell lining uses Phase Change Materials (PCMs) which interact with the body’s unique microclimate to help provide a buffer against temperature swings. • Front and rear shirt-tails constructed of Wick-Away® Mesh not only keeps the vest in place comfortably, it also effectively pulls moisture away from the body and helps keep you cool in warm temperatures and warm in cold temperatures. • Durable inner surface and ballistic panel cover is specially treated with antimicrobial protection to fight the effects of odor-causing mold, mildew and bacteria.  • Ballistic panel shoulder suspension system prevents panels from rolling and sagging and maximizes coverage area. • Dual 5” x 8” and 8” x 10” front and back plate pockets are placed underneath the V-shaped, diamond pattern, water-repellent, Rip-stop nylon which resists ripping or tearing. • Convenient front and back mid-torso zipper opening allows you to load ballistic panels quick and easily. • Removable shoulder and side straps made of Breathe-O-Prene® and low profile molded hook allows unrestricted strap placement and unlimited adjustability.   • Medic Alert Pocket includes Emergency Response Card which can be individually filled out with the officer’s pertinent medical and contact information.

Options: • Armor Ice Active Cooling Inserts • MAC-08, Firearms or GL Outershells • Winter Quilted Outershell • Tailored Armor Carrier (TAC) • Blade Plate Insert • Soft/Steel Trauma Insert • Special Threats Plate (STP) • Colors: White, Navy, Black and Tan

LIBERTY Specially engineered for the female torso, Liberty’s contoured design offers the maximum in comfort and ballistic integrity. The unique construction surrounding the bust area is specially curved to better accommodate a female’s “natural” shape while providing optimal freedom of movement.  Ballistic panels are easily loaded into the vest and held securely in place by Liberty’s innovative ballistic panel suspension system which helps prevent the panels from rolling and sagging inside the carrier. Waist straps offer 8-point adjustability while the back of the outershell extends over the shoulders to create a covered 2-point adjustable shoulder strapping system.  Our temperature regulating, Smart Fabric Technology™ applied to the body-side of the carrier helps keep you cooler and is treated with Microban® to resist the growth of odor-causing mold and mildew. For additional blunt trauma protection, a low profile trauma plate pocket built into the front outershell conceals your trauma plate. These multiple design features result in significantly cooler, dryer and more comfortable all-day performance.   OPTIONS: Standard Features:

Outershell Colors: White Navy Light Blue Black

Head Office: 1-866-652-2877

Gray Tan Brown OD Green

West: (604) 526-1631

• • • • • • •

Unique design provides a naturally shaped bust area Innovative ballistic panel suspension system 10-point adjustable strapping system Smart Fabric Technology inner-lining Durable and soft micro-fiber outershell Front and rear shirt tails 5” x 8” built in trauma plate pocket

Prairies: 1-866-652-2877

East: 1-877-993-9968

Armor Ice™ Active Cooling Inserts MAC - 03, Firearms, GL, or TA Outershells Winter Quilted Outershell Tailored Armor Carrier (TAC) Special Threats Plate (STP) Blade Plate

185

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA concealable vests THE STANDARD Sleek in design and superior in functionality, this high performance concealable body armor raises the industry standard to a new level. Constructed of ultra-durable, premium grade materials, the Standard carrier design combines an innovative ballistic suspension system along with several unique design features, unparalleled in comfort and performance. Standard Features: • Ballistic panel shoulder suspension system • Moisture wicking Akwadyne™ inner lining • Durable 65/35 poly/cotton outershell • VersaStrap™ 12-point removable strapping system • Front and rear shirt tails keeps vest securely in place • Removable elastic straps allow easy carrier laundering • 5” x 8” trauma insert pocket for additional protection

Outershell Colors: White Navy Light Blue Black

Gray Tan Brown OD Green

OPTIONS: Armor Ice™ Active Cooling Inserts MAC- 03, Firearms, GL, or TA outershells Winter Quilted Outershell Tailored Armor Carrier (TAC) Special Threats Plate (STP) Blade Plate Insert

SELF-VENTILATION SYSTEM (SVS) Stay cooler, dryer and more comfortable with our new SVS Concealable Vest. This highly advanced carrier design allows optimum ventilation from the inside out. The carrier’s inner-lining incorporates temperature regulating, Smart Fabric Technology™ which helps keep you cooler and resists the growth of odor-causing mold and mildew. This innovative technology works with the self-ventilating system, resulting in improved temperature control.  When combined with (optional) Armor Ice™ Active Cooling Inserts, the SVS is one of the coolest concealable vests available today.         OPTIONS: Standard Features: • Self Ventilation System (SVS) Armor Ice™ Active Cooling Inserts • Ballistic panel shoulder suspension system MAC - 03, Firearms, GL, or TA Outershells • Zipper opening to load ballistic panels fast and easily Winter Quilted Outershell • Durable micro-fiber outershell Tailored Armor Carrier (TAC) • Smart Fabric Technology™ inner-lining Special Threats Plate (STP) • VersaStrap™ 12-point removable strapping system Blade Plate • Front loading ballistics • Front and rear shirt tails Outershell Colors: • 5” x 8” trauma insert pocket on front ballistic panel Gray White Tan Navy Brown Light Blue OD Green Black

TAILORED ARMOR CARRIER (TAC) The new Tailored Armor Carrier provides the protection you need with a stylized design that offers the professional appearance you want. Designed to be worn over the dress shirt, the TAC features two multi-functional pockets, convenient side opening and a contoured shape for total comfort. Instantly convert the TAC into a ballistic protective vest by inserting PACA concealable ballistic panels into the front and back interior pockets. Within a matter of seconds, the TAC is ready to wear with up to Level IIIA protection. Standard Features: • 600 denier polyester outershell • Soft poly-cotton twill inner lining • Adjustable side straps • Two front bellow pockets • Badge tab holder • Name tab holder • Mic holder

186

Head Office: 1-866-652-2877

OPTIONS: Armor Ice™ Active Cooling Inserts Outershell Colors: Black White Tan Navy Brown Light Blue

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA concealable plates BLADE PLATES Gain confidence with the addition of the Blade Plate to your body armor. The benefit of this insert when worn in conjunction with PACA NIJ certified armor will provide enhanced protection in the area of the sternum and help reduce the effects of trauma in the protected area from pointed objects and edged weapon attacks. STANDARD FEATURES: Constructed of High Quality EFH Stainless Steel

SIZE WEIGHT THINNESS

Armor Ice Front

SIZE WEIGHT THINNESS

10” x 12” Trapezoid 10.5 oz .025

8” x 10” Trapezoid 7.4 oz .025

SIZE WEIGHT THINNESS

5” x 8” Rectangle 4.1 oz .025

Stay Cool Under Fire! Armor Ice™ Keeps You 4° to 7° Cooler Upgrade your PACA body armor with Armor Ice™, a revolutionary thermal management technology that keeps you cool and comfortable while wearing body armor. Unlike membrane wicking fabrics that just transfer limited amounts of moisture, Armor Ice™ turns your armor into an active cooling system. Armor Ice™ is laboratory-tested and field-proven to keep you 4° to 7° cooler for extended periods of time. Now you can comfortably wear your armor year round in all climate conditions. We’re certain you’ll agree, Armor Ice™ converts your body armor into the coolest, most comfortable armor on Earth! We put Armor Ice™ to the test in a recent independent study conducted on the same individual in a thermal control chamber (95° F at 75% humidity). The individual kept a pace of 2.5 mph on a treadmill for 60 minutes wearing a vest withArmor Ice™, and for 60 minutes without (see chart below). The results are conclusive: Armor Ice™ helps keep you 4° to 7° cooler!

SPECIAL THREATS PLATE (STP) Engineered to protect against high energy bullets, PACA Body Armor’s Special Threats Plate (STP) is an ultra-light, semi-rigid insert that consistently exceptional ballistic performance against a wide-range of “special threats” bullets. When worn in conjunction with your PACA concealable body armor, the STP provides additional stopping power along with a high degree of trauma reduction, equaling unparalleled ballistic protection.

STEEL TRAUMA PLATE • • • • • •

Constructed of high quality powder coated steel Increase blunt trauma protection in the sternum area Contoured with a slight horizontal bend The plate is virtually undetectable Lightweight and thin Available in 5” x 8”

SOFT TRAUMA PLATE • Made with the same ballistic materials as our soft body armor panels • Increase blunt trauma protection in the sternum area • Lightweight, completely flexible and thin • Available in sizes 5” x 8” and 8” x 10”

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

187

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA concealable plates Hard Armor Plates PACA Body Armor offers several types of Hard Armor Plates capable of defeating high-powered Level III & IV rifle rounds. These plates are available in a choice of two shapes (full-size or shooter’s cut) to meet your individual needs for comfort and function. Additional options include the choice of ultra-light polyethylene or ceramic plates which will affect weight and thinness. Refer to the table for specific sizes, weights and additional information. PACA hard armor plates fit all PACA tactical systems. Plate NIJ Threat Level Defeats 10” x 12” Level IV .30 cal. M2 AP 166 gr. Shooters Cut Stand Alone @ 2880 ft/s

Plate NIJ Threat Level Defeats 10” x 12” Level III 7.62 mm NATO FMJ Full-Size Plate Stand Alone 148 gr.@2780 ft/s

Plate NIJ Threat Level Defeats 8” x 10” Level IV .30 cal. M2 AP 166 gr. Shooters Cut Stand Alone @ 2880 ft/s

tactical products Desert Fury Modular Protection with Internal Ballistic Suspension System The newly designed Desert Fury tactical system answers the needs and wants of law enforcement professionals by providing improved center of gravity alignment, extreme versatility in fit and enhanced maneuverability. This innovative carrier design is ideal for tactical officers who require functional load-carrying capabilities with the versatility to adapt to any condition. DESERT FURY FEATURES & BENEFITS: • Accommodates all Point Blank NIJ certified Level IIIA ballistic systems and 10” x 12” front and back hard armor plates. • Patent Pending adjustable shoulder system fine tunes fit • Patent pending side closure system speeds up entry • Patent pending integrated water hydration pouch • Easy access flap provides instant access to water bladder • Ballistics are internally supported • New drag strap runs the entire length of back panel • Load bearing MOLLE on front, rear and sides • Front and back hard armor pouches • Agency ID Front, Rear and biceps. • Adjustable cummerbund assists in load bearing • Non-Skid “Butt Retention” surfaces • Retractable groin protector • Includes: removable ballistic collar, throat, biceps and 5 pouches

Front view

Side view

DESERT FURY OPTIONS: • Available in navy, digital ACU, desert tan, OD Green and Woodland Camo • Hard armor plates • Additional equipment pouches • Nomex® fire retardant outershell • Custom agency placards available

All models, data and specifications are subject to modification by manufacturer without notice.

K-9 Operations Vest Designed by a Police K-9 Handler for his service dog, the K-9 Operations Vest is fully adjustable and may be deployed for searches, tracking, extractions and more.

• Available with cooling system • May be used as an outershell only – without ballistics – as K-9 Officer identification

Standard Features: • NIJ Level IIA, II & IIIA Full-Coverage Ballistic Protection for Chest, Back, Sides, and Abdomen • 500 denier Cordura® outershell • Custom sized • Accommodates K-9 Harness • Removable identification • Sewn-in heavy-duty metal rappel loop accommodates ordinary leash

Available vest colors: Black / Navy / OD Green

188

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA tactical products MAC 08 The Original MAC was designed to allow the wearer to quickly convert concealable armor into a multi-purpose outer garment. PACA’s new MAC 08 continues the tradition of excellence and takes functionality and comfort to new levels. Featuring a more streamlined design, the MAC 08 offers an abrasion-resistant outer fabric, providing a more durable outershell for extreme situations. STANDARD FEATURES: • Accommodates PACA concealable ballistic panels • Front and rear identification flaps • Durable, water resistant outershell • Front pockets: 6” x 6” utility, universal radio, and magazine or flashlight • Internal cummerbund • Adjustable permanently attached shoulder straps • Adjustable removable side straps

OUTERSHELL COLORS: Digital ACU Black Woodland Camo Navy Desert Camo OD Green Tan

OPTIONS: MOLLE Compatible Webbing System on Lower Back

MAC FIREARMS When you’re on the range and safety is your highest priority, this highly visible vest stands out. The MAC FIREARMS utilizes your concealable ballistic panels, resulting in a multi purpose outer garment. Redesigned to be more streamlined, standard features include three non-removable front pockets to keep equipment at hand, an internal cummerbund for form fitting adjustability, removable side straps for enhanced adjustability, and removable ID flaps (front and rear) for easy identification. The MAC FIREARMS features a comfortable inner surface while the abrasion resistant outer fabric provides exceptional durability for extreme situations. STANDARD FEATURES: • Bright red, highly visible color • Accommodates PACA concealable ballistic panels • Front and rear identification flaps • Durable denier water resistant outershell • Front pockets: 6” x 6” utility, universal radio, and magazine or flashlight • Internal cummerbund • Adjustable and permanently attached shoulder straps • Adjustable and removable side straps

OUTERSHELL COLORS: Black Digital ACU Navy Woodland Camo OD Green Desert Camo Tan OPTIONS: • Gridlock webbing attachment on lower back • Snap and grid attachment on lower back • Non removable flat utility pocket

MAC GL™ The MAC GL™ offers all the features of the MAC03™ but takes the line one step further for more aggressive situations. It provides the flexibility to quickly convert concealable body armor into a fully-functional, equipment carrying tactical vest via the “Gridlock” webbing attachment system. STANDARD FEATURES: • Accommodates PACA concealable ballistic panels • Includes 8” x 10” internal hard armor plate pockets (front and rear) • “Gridlock” webbing equipment pouch attachment system • Includes 3 mission specific equipment pouches • Front and rear identification flaps • Badge tab holder • Durable denier water resistant outershell • Internal cummerbund • Adjustable and permanently attached shoulder straps • Adjustable and removable side straps

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

OUTERSHELL COLORS: Digital ACU Black Woodland Camo Navy Desert Camo OD Green Tan OPTIONS: Snap and grid attachment system Hard armor plates Additional equipment pouches

189

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA tactical products SVII

Available with new performX Ballistics

Unparalleled in ballistic protection, this ground-breaking tactical system has over 7 integrated design features which provide superior functionality. The SVII is ideally suited for response teams who require convenient load bearing capabilities combined with the flexibility to adapt to any tactical mission. Exceptionally comfortable and ruggedly durable, the SVII offers brute force protection and more custom features than any other tactical vest on the market. Standard Features: • Split ballistic collar design offers improved helmet interface (optional) • Adjustable shoulder strapping system • Ballistic throat protector (optional) Options: • Non-skid weapon shouldering • Removable ballistic biceps protection (optional) Hard armor plates • Dual, low-profile communication wire channels Removable ballistic collar • Front and rear hard armor plate pockets Adjustable ballistic throat protector • Accommodates custom removable identification patches Groin protector • Overlapping side protection with adjustable side closure Bicep protector • MOLLE Compatible Webbing System Nomex® Fire Retardant Outershell • Removable groin protector (optional) • Internal cummerbund for form fitting adjustability (inside) All models, data and specifications are subject to modification by manufacturer without notice. • 5 mission specific equipment pouches

Outershell Colors: Black OD Green Navy Woodland Camo Digital ACU

The Ranger Streamlined and highly effective, the Wilson blends the functionality of a tactical vest with a simple carrier construction that’s geared for high performance. This comprehensive package accommodates soft ballistic panels, hard armor plates, hydration system, and multiple PACA EXCLUSIVE design features.

Hydration Pack Pouch Features: • MOLLE Compatible Webbing System • Gravity supported design • Dual tube channels • Durable denier nylon construction

Standard Features: • Adjustable ballistic shoulder protection • Durable denier nylon construction • MOLLE Compatible Webbing System • Front and rear hard armor plate pockets • 4” side strapping closure • Expandable hydration pouch attachment availability • Internal cummerbund for form fitting adjustability

Back: • Man-down strap • Rear hard armor plate pockets (8” x 10” size Small and Medium, 10” x 12” size Large and above) • Quick Release Plate Drop System • MOLLE Compatible Webbing System

Options: Hydration Pack Hard armor plates Groin protector Bicep protector

THRUST GUARD Thrust Guard’s Spike Class Level 3 Body Armor System exceeds the stab resistance requirements of NIJ Standard 0115.00 with zero penetrations during laboratory testing.  Designed to provide maximum blunt trauma, stab and edged weapon protection, this high performance tactical vest offers Corrections Officers an unprecedented level of security.

Colors Available: OD Green Black Woodland Camo Navy Digital ACU

The Thrust Guard is constructed of EFH Stainless Steel, Kevlar™ and open cell-recovery foam, which enable this truly unique vest to absorb blunt trauma and provide protection to the officer. STANDARD FEATURES: • Adjustable side opening design • NIJ Certified 0115.00 for Spike Level 3 and Edged Weapon Level 3 • Enhanced blunt trauma protection in collar and shoulders • Complete front, back and side stab protection • Adjustable abdomen belt with protective cover flap conveniently located at the front of the vest • Durable high abrasion resistant outer shell OUTERSHELL COLORS: Black All models, data and specifications are subject to modification by manufacturer without notice.

190

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA RAPID DEPLOYMENT ARMOR BAG With point blank precision, this revolutionary new product instantly converts from a multi-purpose weapon carrying case to a tactical body armor vest with up to NIJ Level IV protection. No other product in the market allows for the concealed carry of a long-gun with instant ballistic protection within a matter of seconds. The Rapid Deployment Armor Bag (RDAB) is the first of its kind and is ideally suited to handle the growing crisis of the “active shooter”.

This patent pending convertible armor bag is specially designed for officers’ first-onthe-scene, VIP protection details, large event security and other environments that warrant protection against rifle rounds. The RDAB can hold various size rifles, extra rifle ammunition, pistol magazines, flex-cuffs, flashlight, identification, soft armor, optional hard armor plates and has MOLLE compatible attachment points to hold a protective mask or medical kit.

The gun sling which actually functions as the bag’s shoulder strap allows the rifle to drop securely in place once the 360° zipper is unzipped. Within seconds, the bag instantly reveals front and back panels containing soft ballistics which provide protection for the torso, back and abdomen area. The officer can quickly don the newly converted vest via head opening, while the ballistic panels remain comfortably suspended from the shoulders. When a tactical response is necessary, but waiting for a tactical unit is not an option, the Rapid Deployment Armor Bag is the solution. Rapid Deployment Armor Bag Features: • Universal Plate Carrier Technology allows insertion of front and back 10” x 12” hard armor plates to protect against rifle ammunition • Abdomen Pouch will accommodate 8” x 10” hard armor plate OR adjustable/ ambidextrous pistol holster (both optional) • Soft ballistic panels in the front and back provide NIJ Level IIIA certified protection for the torso, back and lower abdomen area • Constructed from exceptionally strong 500 denier Cordura® Available in two styles: • 360° Zipper Model can hold up to a 24” weapon - easily unzips and allows the rifle to drop conveniently in place • Shroud Model can accommodate a 28” weapon and expands up to 45” via attachment shrouds. The shroud covers the muzzle and the hand-guard of the weapon. The shroud can be rapidly removed and the remaining portion of the bag is donned as a vest. • High visibility identification (detachable) in the front and back • Two oversized magazine pouches support a standard set of 30 round magazines • Small pouches can accommodate two pistol magazines, flashlight, and pistol magazine combination, or one set of flex cuffs. • Concealed back pack straps provide convenient weapon transport • Attachment points for gas mask or other additional equipment • Concealed shoulder and waist straps are adjustable for each individual user’s fit All models, data and specifications are subject to modification by manufacturer without notice.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

191

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA tactical options ballistic blanket PACA Body Armor’s Ballistic Blankets are manufactured from high-strength, lightweight ballistic fabrics which are designed to provide a protective barrier against (Level II or Level IIIA) ammunition. These highly portable blankets are specifically

designed to be quickly and easily thrown over windows, doors and walls, and can be quickly deployed for various high risk situations including executive security, perimeter defense, mine clearance usage and other personal shield and vehicle transport applications.

Standard Features: • Constructed of 1000 Denier Cordura® outershell • Abrasion, flame and water resistant • 4 heavy-duty, nylon carry handles • Custom sizes and shapes available

Sizes

3’ x 4’

4’ x 4’

4’ x 6’

Level II

22 lbs. (9.9 kg)

26 lbs. (11.8 kg)

33 lbs. (15 kg)

37 lbs. (16.8 kg)

45 lbs. (20.5 kg)

Level IIIA 30 lbs. (13.6 kg)

BREACHING BLANKET The use of explosives in a tactical breaching operation possesses serious hazards which require the most technologically advanced ballistic systems that have been rigorously tested against Level II or Level IIIA threats and fragmentation from detonations. PACA’s Barricade Breaching Blanket effectively defeats these specialized threats and are Fragment Simulating Projectile (FSP) rated to meet fragmentation resistance required by US Military Specifications for 2gr, 4gr, 16gr and 64gr and RCC. Engineered for rapid deployment, our Breaching Blanket integrates high-performance aramid ballistic fabrics with dual, heavy-duty PVC handles for easy positioning (i.e. used as gurney/casualty evacuation) and 6 carry handles for convenient transport. Standard Features: • Constructed of 1000 Denier Cordura® Outershell • Abrasion, flame and water resistant • Backpack transportation/storage bag • Sizes: 32” x 72”, 48” x 72” and 36” x 72” (Custom sizes also available) • Colors: Black, OD Green, Woodland Camo

DIAMOND lite Shield Designed to provide a wide range of visibility with the greatest amount of ballistic coverage, DIAMOND lite Shields offer the optimal fusion of weight, protection level and adaptability. DIAMOND lite Shields are equipped with an ambidextrous handle which is padded for shock and comfort, a multi-impact viewport for wide angle viewing and an integral strapping system for additional support. Available in NIJ IIIA ballistic resistance, this highly effective tactical equipment is essential for various high risk approach and dynamic entry situations. Options include: • Available in 20” x 34” or 24” x 36” • High intensity LED light system with handle operated controls

192

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

body armour Body Armour by PROTECTIVE APPAREL CORP OF AMERICA tactical options MICH Light Ballistic Attack Helmet- Level IIIA The MICH is the lightest level IIIA ballistic helmet available on the market today; at about 2lbs it is approximately 40% lighter than standard helmets SHAPE Medium Length: 7.6 - 7.9, Width: 6.0 - 6.3 Circumference: 21.9 - 22.7 Weight: 2.00lbs

SHELL Level IIIA Multi-layered Aramid HARNESS ASSEMBLY 4 point suspension system with foam-cushioned leather headband and chinstrap.

The ergonomic design and reduced ear and neck profile enable unristricted movement for urban warfare.

Ballistic Performance: Tested in accordance with the American National Institute of Justice (NIJ) Standard 0106.01 for penetration and back face deformation at Level IIIA using 9mm and .44 Magnum ammunition. V50 ballistic test according to MIL-STD-662F, 17 grains: 2210 ft/sec (670 m/sec).

STRIKER P Ballistic PASGT Helmet - Level IIIA The STRIKER P is a lightweight, high-performance helmet that provides level IIIA protection against ballistic impact and fragmentation hazards. SHAPE US PASGT in accordance with MIL-H44099A

HARNESS ASSEMBLY 3 point suspension system with foamcushioned leather headband and chinstrap

SHELL Hybrid multi-layered Aramid and ballistic fabric in a resin matrix

OPTIONAL ACH ComfiPad point suspension or LGH light neorene harness

Ballistic Performance: Tested in accordance with the American National Institute of Justice (NIJ) Standard 0106.01 for penetration and back face deformation at Level IIIA using 9mm and .44 Magnun ammunition. V50 ballistic test according to MIL-STD-662F, 17 grains: 2210 ft/ sec (670 m/sec).

knee and elbow pads Designed specifically for tactical operations, these extremely comfortable high density pads fit under or over clothing, making them ideal for long-term wear. Constructed of highly durable, abrasion resistant 500 Denier Cordura® outershell, the elbow pads feature ultra stretch neoprene for greater maneuverability while the adjustable straps and VELCRO fasteners in the knee pads provide a secure fit. Both are offered with contoured plastic knee and elbow caps or optional nonskid surface for better traction. Available with MIL-SPEC / DoD fragmentation or NIJ Level IIIA ballistic protection.

L.E.A.P.S™

FEATURES AND BENEFITS:

Specially designed to protect the femoral arteries and veins from potentially lethal leg related injuries, PACA Body Armor’s Lower Extremity Armor Protection System (LEAPS) provides exceptionally lightweight ballistic protection with an unparalleled level of comfort, flexibility and mobility.

• Available with high-performance NIJ Level IIIA ballistic system that is rigorously tested to meet or exceed the Military V50 • Specifications in accordance with MIL-STD-662F for 2gr, 4gr, 16gr and 64gr RCC fragmentation • Load bearing MOLLE webbing offers easy mounting of holsters, spare magazines, grenades, stun munitions and other combat equipment • Trauma insert plate pocket allows insertion of 5” x 8” Special Threats Plate (STP) for an even greater level of protection • Ultra-stretch strapping system with dual VELCRO® Fasteners provides 2-point adjustability • LEAPS attaches to the belt in seconds • Extensive ballistic coverage protects the hip and front/rear thigh region against fragmentation to lower body and thermal burns from operations in hazardous environments • Contoured shape allows wearer to run, climb, and shift from prone to standing positions and maneuver easily with total comfort • Constructed of extra durable 500 denier Cordura®

Injury to the femoral arteries and veins of the abdomen and thigh from high energy projectiles carries a high risk of injury and/or death from shock and blood loss. Lower extremity armor was created to protect these vital areas while allowing the operator to maintain mobility. All models, data and specifications shown are subject to modification by manufacturer without notice.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

193

body armour Body Armour by POINT BLANK concealable options C-Series™

HI-LITE™ PROFORMANCE

An Industry Standard

High Performance Lightweight

The C-Series™ ballistic system has earned a reputation as the reliable “workhorse”, capable of defeating high energy threats while providing lightweight wearability. Officers throughout the country trust this industry standard and continue to depend on it for their protection. C-Series™ Features: • Patented Self-Suspending Ballistic System™ (SSBS) prevents rolling and sagging of ballistic panels inside the carrier • Durable outershell is constructed of first quality, dimensionally stable 65% polyester / 35% cotton fabric with a soil resistant finish. • Integrated carrier design provides comprehensive protective coverage with enhanced mobility • Trauma insert pocket accommodates 5” x 8” or 8” x 10” trauma insert plate • Removable 2” waist straps provides 8-point adjustability • Internal 4” elastic cummerbund assists in keeping the vest securely in place during strenuous activity • Shirt-tails in the front and back helps prevent “riding up” when sitting • Princess cut (available) accommodates a female’s natural form while providing the optimal combination of comfort, fit and protection.

HI-LITE™ Proformance will change the way you evaluate body armor. This performance driven body armor system is rigorously tested against “Special Threats” and Military V50 Specifications.  Designed with over 7 integrated features, the HI-LITE™ provides the ultimate combination of protection and comfort. HI-LITE™ Proformance Features: • Patented Self Suspending Ballistic System™ (SSBS) features stretch neoprene shoulder straps which directly connects to the front and back ballistic panels, thereby preventing rolling and sagging of ballistic panels inside the carrier • Moisture wicking inner material helps keep you dry • Zero-drag, soil resistant micro-fiber outer surface reduces bunching and pulling under the uniform shirt • Integrated carrier design provides comprehensive protective coverage • External mid-torso horizontal zipper allows improved insertion and removal of ballistic panels and eliminates uncomfortable body side seams and bulges against the body. • Removable 2” waist straps provides 8-point adjustability -– optional 4” strap available • Trauma insert pocket accommodates 5” x 8” or 8” x 10” trauma insert plate • Internal 4” elastic cummerbund assists in keeping the vest in place during strenuous activity • Front and back shirttails and helps prevent “riding up” when sitting • Princess cut (available) accommodates a female’s natural form while providing the optimal combination of comfort, fit and protection. HI-LITE™ Proformance Benefits:

C-Series™ benefits: • Ballistic Protection features (Level II and IIIA) NIJ Certified ballistic materials • Easy Care - Removable ballistic panels allow convenient cleaning of the carrier • Additional Protection - includes 5” x 8” Soft Trauma Insert.

NIJ LEVEL II IIIA

WEIGHT (PSF 0.99 1.2

9MM V50 (FPS) 1736 1822

9MM BFS (MM) 30 27

c-Series™ Options: • Special Threats Plate (STP) • Steel trauma insert • Blade plates • Additional poly/cotton carrier

HI-LITE™ Proformance Options: • 4” removable waist straps • R20-D carrier • Colors: black, white, navy and tan

All models, data and specifications are subject to modification by manufacturer without notice.

194

• Lightweight Design naturally flexes to the contours of your body for exceptional maneuverability • Exceptional Protection – HI-LITE ballistics have been rigorously tested to meet or exceed the Military V50 Specifications in accordance with MIL-STD-662F for 2gr, 4gr, 16gr and 64gr RCC fragmentation. • Stay Cool and Dry - Akwadyne® moisture wicking inner material moves moisture away from the body and aids in the evaporation and cooling process. • Odor Resistant - Ballistic panel cover is heat-welded and specially treated with Microban® antimicrobial protection which fights the effects of odor-causing mold, mildew and bacteria. • Easy Care - Removable ballistic panels allow convenient cleaning of the carrier • Additional Blunt Trauma Protection - includes 5” x 8” Soft Trauma Insert.

• Special Threats Plate (STP) • Steel trauma insert • Blade plates • Additional micro-fiber carrier

• 4” removable waist straps • R20-D tactical carrier • Colors: black, white, navy and tan

All models, data and specifications are subject to modification by manufacturer without notice.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

body armour Body Armour by POINT BLANK concealable options SPECIAL THREATS PLATE (STP) Engineered to protect against high energy bullets, Point Blank’s Special Threats Plate (STP) is an ultra-light, semi-rigid insert that consistently exceptional ballistic performance against a wide-range

of “special threats” bullets. When worn in conjunction with your Point Blank concealable body armor, the STP provides additional stopping power along with a high degree of trauma reduction, equaling unparalleled ballistic protection.

Average Velocity DEF Test FPS/Shots Special Threat Round Tested Date Fired (a) Corbon 9mm +p 115gr JHP 04/25/07 1446 (12 shots) 30mm Winchester Ranger 9mm Luger 147gr SXT 04/25/07 1148 (12 shots) 22mm Winchester Ranger 9mm Luger +P+ 127gr SXT 04/25/07 1289 (10 shots) 18mm Geco 9mm Luger 124gr FMJ 04/26/07 1139 (12 shots) 23mm Lellier & Bellot 9mm Luger PARA 115gr FMJ 04/26/07 1156 (12 shots) 17mm Belgium 5.7 x 28 Stnd. Rnd. SS195 S.R. Ammo 04/27/07 2020 (12 shots) 16mm Belgium 5.7 x 28 Stnd. Rnd. SS196 S.R. Ammo 04/27/07 1530 (12 shots) 17mm Hornady Frontier Cartridges 10mm AUTO 155gr JHP 04/27/07 1291 (12 shots) 29mm Hornady Frontier Cartridges 10mm AUTO 170gr JHP 04/27/07 1265 (10 shots) 24mm Remington .357SIG 125gr GJHP 04/27/07 1325 (12 shots) 27mm Interarms 7.63mm x 25 FMJ 05/01/07 1449 (12 shots) 23mm CZECH Tokarev 7.62mm x 25 Steel Jacket 05/01/07 1553 (8 shots) 15mm *STP Testing conducted Stand Alone on NIJ 0101.04 compliant clay backing. All models, data and specifications are subject to modification by manufacturer without notice.

Steel Trauma Insert The Steel Trauma Reduction Insert consists of a 5x8 steel plate, with a nominal thickness of .072” inches. This Steel Trauma Reduction Insert, when used in conjunction with Point Blank NIJ certified armor, may help reduce the effects of trauma in the protected areas from bullet impacts, pointed objects, edged weapons, and impacts from the steering column in some automobile accidents. Flexible (Soft) Trauma Insert The Flexible Trauma Reduction Insert consists of a matrix of flexible ballistic materials with a nominal thickness of .222” inches. The Flexible Trauma Reduction Insert, when used in conjunction with Point Blank NIJ certified armor, may help reduce the effects of trauma in the protected areas from bullet impacts,

SIZE 5” x 8” Rectangle WEIGHT 2.09 oz.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

pointed objects, edged weapons, and impacts from the steering column in some automobile accidents. The Flexible Trauma Reduction Insert is encased in a water resistant cover. WARNING: Trauma Reduction inserts are ONLY effective when used in conjunction with, and placed in front of standard body armor systems. DO NOT USE WITHOUT BALLISTIC PANEL. Blade Plate Inserts For volatile situations where a sharp weapon may be involved, enhance your protection with a Point Blank Blade Plate. Constructed of high-quality cobalt alloy, Blade plates help defeat edged weapon attacks.

6” x 8” Rectangle 3.50 oz.

East: 1-877-993-9968

8” x 10” Trapezoid 5.80 oz.

10” X 12” Trapezoid 8.75 oz.

195

body armour Body Armour by POINT BLANK concealable options

tactical products

VISION™

ASSAULT-1

Engineered for Superior Performance Designed for Maximum Comfort

Specially developed to enhance mobility, improve shooter accuracy and provide maximum load bearing capabilities, the Assault-1 can adapt to any tactical mission with split-second precision. This exceptionally lightweight, tactical vest is constructed of triple stitched, ultra-durable 1000 denier Cordura® outershell. Available with all Point Blank Level IIIA side-opening ballistic systems and rigorously tested to endure the rigors of training, the Assault-1 offers the ultimate combination of protection, functionality and performance.

Excess body heat and limited flexibility have been critical issues with ballistic protection, until now. VISION™ is the first Total Body Armor System that integrates Hi-Performance Ballistic Materials with an innovative carrier design featuring temperature regulating technologies, antimicrobial protection and our exclusive Self Suspending Ballistic System™. These innovations result in significantly cooler, dryer and more comfortable all-day performance. VISION™ Features: • Patented Self Suspending Ballistic System™ (SSBS) features stretch neoprene shoulder straps which directly connects to the front and back ballistic panels, thereby preventing rolling and sagging of ballistic panels inside the carrier • Soft, temperature regulating inner surface helps keep you cooler and is treated with Microban® to resist the growth of odor-causing mold and mildew • Zero-drag, soil resistant micro-fiber outer surface reduces bunching and pulling under the uniform shirt • Ergonomic design provides extensive protective coverage and maximum mobility • Exterior mid-torso zipper opening for convenient ballistic panel insertion and removal • Removable 2” waist straps provides 8-point adjustability – optional 4” strap available • Trauma insert pocket accommodates 5” x 8” or 8” x 10” trauma insert plate • Internal 4” elastic cummerbund assists in keeping the vest in place during strenuous activity • Front and back shirt-tails helps prevent “riding up” when sitting • Princess cut (available) accommodates a female’s natural form while providing the optimal combination of comfort, fit and protection. VISION™ Benefits: VISION™ is the Most Comfortable, Light Weight, Special Threats Tested Ballistic System on the Market. • Ranked High in Comfort and Performance by NTOA members • Stay Cooler - engineered with Outlast® Adaptive Comfort® technology to help keep your body cooler • Maximum Flexibility – designed to provide greater range of motion to maneuver easily • Stay Drier - Inner carrier surface and ballistic panel cover is specially engineered to provide superior moisture resistance • Odor Resistant - ballistic panel cover is heat-welded and treated with Microban® antimicrobial protection which fights the effects of odor-causing mold, mildew and bacteria. • Easy Care - Removable ballistic panels allow convenient cleaning of the carrier • Additional Blunt Trauma Protection - includes 5” x 8” Soft Trauma Insert. VISION™ OPTIONS: • Special Threats Plate (STP) • 5” x 8” steel trauma insert • Blade Plates • Additional VISION™ carrier

• 4” removable waist straps • R20-D tactical carrier • Carrier colors: black, white, navy and tan

All models, data and specifications are subject to modification by manufacturer without notice.

Features and Benefits: • Self-Suspending Ballistic System™ keeps ballistic panels in place and maximizes coverage area • Posi-Lock Shoulder Strapping System provides 3 inches of adjustability and is foam padded for greater comfort • Contoured chest construction designed to enhance shooter accuracy and eliminate “hugging a barrel” effect when shooting on the move • Dual Cummerbund System • Internal cummerbund stabilizes rear ballistic panel and improves weight distribution • Exterior cummerbund provides up to 6 inches of adjustability, incorporates MOLLE webbing to protect and secure secondary tools and can be easily removed/replaced with new set-up to change configuration of vest for rotating assault duties • Ambidextrous rifle stock retention surface for both left or right hand weapon mounting • Adjustable and removable bicep sleeve works with the shoulder strapping system for optimum positioning of the bicep protector • Maximum MOLLE load bearing webbing placed throughout the vest and secondary MOLLE webbing on the exterior cummerbund for additional equipment • True “A” frame drag strap design with comfort-grip covers the entire length of the vest and is reinforced at three anchor points for long-lasting support • Bottom-loading, front hard armor plate pocket design helps keep the area near the top of the vest free of shooting obstructions • Top-loading, back hard armor plate pocket features dual VELCRO® Fasteners in the internal pocket and the vest’s exterior pocket for greater stability • Attachment points for 2” x 10” identification on the front and back Options: • 10” x 12” Hard Armor Plates • Additional Equipment Pouches • Knee and Elbow Pads (with or without ballistic protection) • Removable Bicep and Groin Protector • Colours: Black, ACU, Navy, OD Green, Coyote, Desert Tan and Desert Cammo

196

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

body armour Body Armour by POINT BLANK tactical products DRAGON FIRE OPTIONS: • 10” x 12” hard armor plates • 5” X 8” trauma insert plates • Knee and elbow pad (with or without ballistic protection) • Additional equipment pouches • Custom agency placards available • Available in Black, OD Green, ACU or Navy

Dragon Fire Answering the strategic needs of your most critical missions, Dragon Fire’s edge-to-edge ballistic system is rigorously tested against “Special Threats” and engineered to meet or exceed Military V50 Specifications for Fragment Simulating Projectile (FSP) testing. The Dragon Fire features Point Blank’s exclusive Self Suspending Ballistic Technology, Rapid Release Break Away System and the industry’s only Bicep and Side Closure Plate Pocket Design which accommodates a variety of plates including the ultra lightweight, Special Threats Plate (STP). This performance driven, side opening tactical armor system combines ultimate coverage and maneuverability with its ergonomically designed Critical Contour Cut while providing split-second adaptability - when you need it most. All models, data and specifications are subject to modification by manufacturer without notice.

Features and Benefits: • Critical Contour Cut improves weight transfer and provides optimum ballistic coverage while allowing greater range of motion • Self Suspending Ballistic System™ (SSBS) keeps ballistic panels in place, improves load bearing capability and eliminates rolling and sagging of ballistic panels inside the carrier • Rapid-Release Break Away System for rapid doffing without complicated cables and wires   • Shock Absorbing Shoulder Straps help suspend vest, significantly reduces shoulder tension and evenly distributes weight • Multiple Sizing Points in the shoulders and waist allow

you to “fine-tune” the vest for a universal fit • Exclusive Bicep and Side Closure Plate Pocket Design accommodates 5” x 8” Special Threats Plates (STP) capable of protecting against high powered rounds • Removable 2-Piece Collar Design with Smooth Rip-stop Inner Lining provides greater comfort and improves interface with multiple styles of helmets • Removable Throat Protection ergonomically designed to fit comfortably around chin area • Removable Bicep Protection provides improved ballistic coverage • Retractable Groin Protection with one-step loop release system for quick access during deployment • Adjustable and Removable Cummerbund for additional load bearing support

• Enhanced Side Protection with up to 4” of waist adjustability and ballistic coverage • Dual Size Combo Plate Pockets in the front and rear accommodates 8” x 10” or 10” x 12” hard armor plates • Internal Plate Retention System with reinforced, heavy duty 6” elastic strap - keeps plates close to the body for improved weight distribution and better center of gravity • Non-skid “Butt Retention” Surfaces for both right and left hand weapon mounting • Removable Hydration Pouch accommodates standard hydration systems • Agency ID Front, Rear and Biceps • Maximum MOLLE Load Bearing Webbing throughout the vest

S.P.I.D.E.R® Stealth Protection Integrated Design Equipment Resource Designed to meet the ballistic protection needs of tactical forces, the New S.P.I.D.E.R. showcases the most frequently requested mission specific options coupled with Point Blank’s highly innovative design features. Unparalleled in security, comfort and functionality, the S.P.I.D.E.R. delivers maximum performance. FEATURES AND BENEFITS: • High performance NIJ Certified Level IIIA ballistic system • Front opening design features 6” ballistic overlap and additional 3” side overlap • Hidden adjustment straps provide customized fit and exceptional comfort • Removable throat protector is specially contoured for improved ballistic coverage • Removable 2-piece collar offers greater range of motion • Adjustable cummerbund for additional load bearing support • Retractable and hidden groin protector • Removable bicep protection • Bicep and side closure plate pockets fits 5” x 8” trauma insert plates • Dual size combo plate pockets in the front and back accommodates 8” x 10” or 10” x 12” hard armor plates • Concealed channel for communications wiring • Non-skid rifle butt retention for both right and left hand weapon mounting • Reinforced man down strap • Exceptionally strong 500 denier Cordura® outershell construction • Maximum MOLLE load bearing webbing

S.P.I.D.E.R® OPTIONS: • 10” x 12” hard armor plates • 5” x 8” trauma insert plates • Additional equipment pouches • Knee and elbow pads (with or without ballistic protection) • Available in Black, OD Green, ACU or Navy All models, data and specifications are subject to modification by manufacturer without notice.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

197

body armour Body Armour by POINT BLANK tactical products R20-D Tactical Carrier

R20-D Features and Benefits: • Ballistic Protection that accommodates NIJ Certified Point Blank ballistic panels • Side-Closure System offers convenient adjustability with low profile VELCRO® fasteners and elastic • MOLLE Compatible webbing in the front of the carrier allows accessory pouch attachment • High-Visibility Identification with removable VELCRO® Fasteners can be placed on the front and back • Multi-functional Pockets includes large and small utility pockets, mini flashlight pocket, magazine pocket and radio pocket

The R20-D is ideal for law enforcement officers who have occasional equipment-carrying assignments. This accessory carrier can be easily converted into a ballistic protective vest by allowing insertion of the ballistic panels from all three concealable vests, including VISION™, HI-LITE™ Proformance, and C-Series. In minutes, the officer has ballistic protection with load bearing capabilities.

New R20-D ENHANCED Tactical Carrier Point Blank has taken the original concept of the R20-D accessory carrier and added several new design features that offer exceptional functionality and extraordinary value for officers who need the load bearing benefits of a tactical carrier at a fraction of the cost. This highly innovative design allows for rapid insertion of the ballistic panels from all three concealable vests, including VISION™, HI-LITE™ Proformance, and C-Series.

R20-D enhanced Features and Benefits: • Ballistic Protection Accommodation Convenient Side-Closure System MOLLE Compatible High-Visibility Identification Multi-Functional Pockets • Nylon Mesh incorporated on the body side of the carrier allows maximum airflow and ventilation • Non-Skid Material in Shoulders provides comfortable rifle butt retention • Removable Side Straps allows greater adjustability • Extended Ballistic Coverage provides additional protection for groin and lower back • Cummerbund safely secures the back panel of the vest to the torso • Webbing in shoulders conveniently holds microphone handset • 10” X 12” hard armor plate pocket in the front and back gives you the option for Level III-Level IV protection • 5” X 8” trauma insert pocket provides another opportunity to significantly reduce blunt trauma

SWAT CERT PLUS The Plus Means Additional Life Saving Protection The NEW SWAT CERT PLUS side opening tactical system offers high performance ballistic protection, integrated in a fully functional and versatile design to meet the strategic needs of your specific mission. This tactical vest now features Point Blank’s exclusive side protection system, enhanced bicep coverage, retractable groin protection, and maximum load bearing webbing. FEATURES AND BENEFITS: • High performance NIJ Certified Level IIIA ballistic system • Side opening design with 3” ballistic overlap provides greater adjustability and protective coverage • Removable 2-piece collar design offers improved helmet interface • Specially contoured throat protector provides improved fit and ballistic coverage • Adjustable cummerbund for additional load bearing support • Retractable and concealed groin protector • Removable bicep protection • Bicep and side closure plate pockets fits 5” x 8” trauma insert plates • Dual size combo plate pockets in the front and back accommodates 8” x 10” or 10” x 12” hard armor plates • Attachment for 2” x 10” identification • Non-skid rifle butt retention for both right and left hand weapon mounting • Reinforced man down strap • Sturdy 500 denier Cordura® outershell construction resists tears and punctures • Maximum MOLLE load bearing webbing

198

Head Office: 1-866-652-2877

SWAT CERT PLUS OPTIONS: • 10” x 12” hard armor plates • 5” x 8” trauma insert plates • Additional equipment pouches • Knee and elbow pads (with or without ballistic protection) • Available in Black, OD Green, ACU or Navy All models, data and specifications are subject to modification by manufacturer without notice.

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

body armour Body Armour by POINT BLANK tactical options

Cordura® Carry Case The heavy-duty Point Blank Cordura® Carry Case is ruggedly constructed and specially reinforced for long life. It’s ideal for transporting and storing tactical armor and accessories between operations and is available with removable identification. colors: Black, OD Green

Nylon Carry Bags These Point Blank Carry Bags are constructed of durable nylon, and are available with removable identification. colors: Black, OD Green

Hard Armor Plates Point Blank offers several types of Hard Armor Plates capable of defeating high-powered Level III & IV rifle rounds either in combination with Point Blank’s Level IIIA certified soft body armor systems or as a stand-alone. These plates are available in a choice of two shapes (full-size or shooter’s cut) with the option of a (single or triple curve) design to meet your individual needs for comfort and function. Additional options include the choice of ultra-light polyethylene or ceramic plates which will affect weight and thinness. Refer to the table for specific sizes, weights and additional information. Point Blank hard armor plates fit all Point Blank tactical systems.

Plate

NIJ Threat Level

8” x 10” Full Size Plate

Level IV Stand Alone & In Combination

FT.30 cal. M2 AP 166 gr. @ 2880 ft/s

8” x 10” Shooters Cut

Level IV Stand Alone & In Combination

.30 cal. M2 AP 166 gr. @ 2880 ft/s

10” x 12” Full-Size Plate

Level III & IV Stand Alone & In Combination

7.62 mm NATO FMJ 148 gr. @ 2780 ft/s .30 cal. M2 AP 166 gr. @ 2880 ft/s

10” x 12” Shooters Cut

Level III & IV Stand Alonea & In Combination

7.62 mm NATO FMJ 148 gr. @ 2780 ft/s .30 cal. M2 AP 166 gr. @ 2880 ft/s

Head Office: 1-866-652-2877

Defeats

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

199

BODY ARMOUR Body Armour by PRO-FORMANCE THE BREACHER™

Twaron® is a lightweight, super strong synthetic fiber made from the aramid polymer.

Required equipment for all tactical officers executing breaching or insertion operations. The Breacher protective sleeves establish a new level of safety for officers; minimizing puncture or laceration injuries resulting from glass shards, door/ window edgings or other sharp objects. The protection afforded is vital during the initial penetration and/or the “cleaning” of the “breached” area. The unique sleeve design provides comprehensive shoulder, arm and hand protection, while allowing for full range of motion. The sleeves can be worn in conjunction with current tactical gear. Multiple layers of Twaron® are incorporated into a sectional design that allows for flexibility in key areas, while the unique articulating elbow allows for dexterity and protection. The sleeves are easy to put on, and can be secured based on an individual’s specific requirements. More importantly, the design allows for efficient and unencumbered removal of the unit immediately following the event. The C-Tack™ grip material in the palm ensures positive contact with the breaching tool at all times. This unique material grips well in all weather conditions. Increased confidence, knowing that you are protected, will result in a more effective operation. Ensure your team has the required equipment.

C-Tack’s uniqueness and effectiveness is that it is the only process where the grip is part of the material. The result is a permanent grip that will not wear away. Simply wipe with a damp towel to continually restore its original grip. C-Tack™ is a product of Cutters.

BODYARMOUR® BODYARMOUR® is a high performance undershirt, incorporating the advantage of cut resistant protection. The shirt is manufactured using market leading high tech material for moisture management, and reinforced in critical areas with KEVLAR®. Accept no substitutes as there is no other shirt that sets the benchmark for everyday comfort and protection. Let BODYARMOUR® be your last layer of defence. Performance and protection are engineered together in the BODYARMOUR® shirt. First responders can be faced with unknown variables, at any given time. A law enforcement or correctional officer cannot afford to leave critical areas of the wrist, forearm, upper arm, and under armpit area exposed and open to laceration from various objects, instruments or weapons. The BODYARMOUR® shirt’s patented design is comfortable to wear everyday under your current equipment, while providing an increased level of protection. The body of the protective shirt is manufactured using the latest in moisture management and antimicrobial material to keep you dry and comfortable under your vest and against your skin. It is as light and comfortable as a cotton shirt, and dries four times faster. The fit is tapered with generous compression that is not restrictive. The arms and underarm panels are designed utilizing a special composition of KEVLAR®, including X-STATIC® and spandex. The cut resistant sleeves are dynamic and flexible and will protect the arms like a sheath. The sleeves are tested up to an 8.0 Average Cut Index against the EN 388 test for cut resistance.

ANTIMICROBIAL AND THERAPEUTIC X-STATIC® – The Silver Fiber - is integrated into all components of the BodyArmour shirt. X-STATIC® is a high performance fiber system made with pure silver. Silver is a natural antimicrobial, enabling XSTATIC® to safely inhibit the growth of the odor-causing bacteria and fungi in this product. Silver also has the best possible thermodynamic properties, so you will stay cooler in the summer and warmer in the winter. X-STATIC® is safe and natural and will not wash out. CUT RESISTANCE The BODYARMOUR® shirt is reinforced in critical area with the synthetic fabric KEVLAR®. KEVLAR® is a knit aramid that has high strength, high modulus, toughness, and thermal stability. It is a lightweight material with exceptional cut, abrasion, and heat resistance. KEVLAR® fabric absorbs the energy and dissipates it across the fibers. From an equal weight basis, KEVLAR® is 5 times stronger then steel.

MOISTURE MANAGEMENT Dri-release® is a unique fabric that feels like cotton and keeps wearers comfortable, dry and odour-free. Made from a patented yarn, with just a trace of cotton, DRI-RELEASE® combines the best qualities of both - it wicks moisture away from the skin and it is soft to the touch. Unlike other topically finished performance polyesters that lose their ability to wick away moisture with each washing, Dri-release’s® comfort qualities are permanent. They’re built right into the fiber itself so clothing made with DRI-RELEASE® always feels soft, always stays dry.

200

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLOTHING

Uniforms by MDC CLOTHING BDU'S 1060 SHORT TROUSERS 1061 REGULAR TROUSERS 1062 LONG TROUSERS

2 POCKET SHIRT WITH EPAULET 2020 SHORT 2021 REGULAR 2022 LONG

Total six pocket trouser Two front slash pockets Two rear inset pockets with buttoned flaps Two large three pleat partial bellows cargo Pocket with buttoned flaps and drain holes Two side adjustment tabs with black metal buckles Four button fly with three buttons hidden Leg hem has drawstring with knotted ends and Tacked at the back to prevent pull through Double reinforced knee and seat Felled inseam, outseam and seat Bar tacked stress points

Designed to tuck in Two breast pocket bellows type with drain holes and buttoned flaps . Five button shirt closure on front placket four of them covered. Double reinforced elbows Shoulder epaulets. All seams two needle felled construction. Bar tacked stress points Hidden pen pocket Adjustable sleeve buttons

Fabric Poly / cotton twill : 60 % Cotton / 40% poly presto wrinkle free Poly /cotton rip stop : 65 % Poly / 35 % cotton presto wrinkle free Waist sizes 28” – 54” (Even sizes) Colors: Black, Navy

Fabric Poly / cotton twill : 60 % Cotton / 40% poly presto wrinkle free Poly /cotton rip stop : 65 % Poly / 35 % cotton presto wrinkle free Sizes Xs - 4xl Colors: Black, Navy

3051 ZIPPER SHORT Total six pocket short Two front slash pockets Two rear inset pockets with buttoned flaps Two large three pleat partial bellows cargo pocket with buttoned flaps and drain holes Two side adjustment tabs with black metal buckles Ykk heavy duty auto lock brass zipper Double reinforced seat Felled inseam, outseam and seat Bar tacked stress points Heavy duty 7 oz weave fabric Bartacked belt loops standard 10” inseam

4 POCKET COAT 2040 SHORT 2041 REGULAR 2042 LONG Two breast pocket bellows type with drain holes and buttoned flaps. Two lower pockets partial bellows with buttoned flaps Five button shirt closure on front placket four of them covered. Double reinforced elbows Fused pocket flaps and collar All seams two needle felled construction. Bar tacked stress points Hidden pen pocket Adjustable sleeve buttons

Fabric Twill : 60 % cotton / 40 % poly presto wrinkle free ripstop : 65% poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

3061 SHORT Total six pocket short Two front slash pockets Two rear inset pockets with buttoned flaps Two large three pleat partial bellows cargo pocket with buttoned Flaps and drain holes Two side adjustment tabs with black metal buckles Four button fly with three buttons hidden double reinforced seat Felled inseam, outseam and seat Bar tacked stress points

Fabric Poly / cotton twill : 60 % Cotton / 40% poly presto wrinkle free Poly /cotton rip stop : 65 % Poly / 35 % cotton presto wrinkle free Sizes: Xs - 4xl Colors: Black, Navy

Fabric Poly / cotton twill : 60 % Cotton / 40% poly presto wrinkle free Poly /cotton rip stop : 65 % Poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

201

CLOTHING

Uniforms by MDC CLOTHING DUTY WEAR SEVEN POCKET TROUSER 1071

NINE POCKET TROUSER 1091

Total seven pocket trouser Two front slash pockets Two rear velt pockets with flaps Two large cargo pockets with hidden pleats For space and a clean look Multi utility pocket Ykk® heavy duty brass zipper 1” Wide belt loops for strength with a d-ring Reinforced knee Permanent military creases Gripper waist band with two hook and eye closures Bartacked stress points Adjustable open inseam: 36”

Total nine pocket trouser Two front slash pockets Two rear patch pockets with velcro Two rear inset pockets Two large cargo pockets with hidden pleats for space and a clean look Multi utility pocket Ykk® heavy duty brass zipper Double belt loops for strength and style with a d-ring Reinforced knee and seat Felled inseam, outseam and seat Permanent military creases Hook and eye closure 48 Bartacks for strength

Fabric Poly / cotton stain repellant twill : 65 % Poly / 35% cotton Waist sizes: 28” – 54” (Even sizes) Colors: Black, Navy

SIX POCKET CARGO TROUSER 1081

SIX POCKET LADIES CARGO TROUSER 08109

Total six pocket trouser Two front slash pockets Two rear velt pockets with button closure Two large cargo pockets with velcro closure Ykk® heavy duty brass zipper Hook and eye closure Bartacked stress pointsz Adjustable open inseam: 36”

Total six pocket trouser Two front slash pockets Two rear velt pockets with button closure Two large cargo pockets with velcro closure Ykk® heavy dutyauto lock brass zipper Hook and eye closures Bartacked stress points Bartacked belt loops Heavy duty 7 oz weave fabric Pants are available surged and unhemmed in 37” inseam Time tested ladies fit for ultra comfort

Fabric Poly / cotton stain repellant twill : 65 % Poly / 35% cotton Waist sizes: 28” – 54” (Even sizes) Colors: Black, Navy

202

Head Office: 1-866-652-2877

Fabric Poly / cotton stain repellant twill: 65 % Poly / 35% cotton Twill : 60 % cotton / 40 % poly presto wrinkle free Ripstop : 65%poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLOTHING

Uniforms by MDC CLOTHING DUTY WEAR

SEVEN POCKET SHORT 3071

SIX POCKET CARGO SHORT 3081

Total seven pocket short Two front slash pockets Two rear velt pockets with flaps Two large cargo pockets with hidden Pleats for space and a clean look Multi utility pocket Ykk® heavy duty brass zipper 1” Wide belt loops for strength with a d-ring Gripper waist band with two hook and Eye closures Bartacked stress points

Total six pocket shortt Two front slash pockets Two rear velt pockets with button closure Two large cargo pockets with velcro closure Ykk® heavy duty brass zipper Hook and eye closure Bartacked stress points Fabric Poly / cotton stain repellant twill : 65 % Poly / 35% cotton Waist sizes: 28” – 54” (Even sizes) Colors: Black, Navy

Fabric Poly / cotton stain repellant twill : 65 % Poly / 35% cotton Waist sizes: 28” – 54” (Even sizes) Colors: Black, Navy

NINE POCKET SHORT 3091

SIX POCKET LADIES CARGO SHORT 08111

Total nine pocket short Two front slash pockets Two rear patch pockets with velcro Two rear inset pockets Two large cargo pockets with hidden pleats for space and a clean look Multi utility pocket Ykk® heavy duty brass zipper Double belt loops for strength and style with a d-ring Reinforced seat Felled inseam, outseam and seat Hook and eye closure 48 Bartacks for strength

Total six pocket short Two front slash pockets Two rear velt pockets with button closure Two large cargo pockets with velcro closure Ykk® heavy duty auto lock brass zipper Hook and eye closures Bartacked stress points Heavy duty 7 oz weave fabric Bartacked belt loops Standard 10” inseam Time tested ladies fit for ultra comfort Fabric Poly / cotton stain repellant twill: 65 % poly / 35% cotton Twill: 60 % cotton / 40 % poly presto wrinkle free Ripstop: 65%poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

Fabric Poly / cotton stain repellant twill : 65 % Poly / 35% cotton Waist sizes: 28” – 54” (Even sizes) Colors: Black, Navy

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

203

CLOTHING

Uniforms by MDC CLOTHING EMS TEN POCKET TROUSER 1041

E.M.S UNIFORMS 1043

Ten pocket trouser Two front slash pockets Two rear velt pockets with button closure Two large cargo pockets with velcro closure Two large cargo pockets with zip closure Two patch pockets with three divisions on cargo pockets with two 1” wide straps with adjustable velcro fastening for securing ems equipment Stretchable waist band with hidden elastic and silicon row for shirt grip Ykk® heavy duty auto lock brass zipper Double hook and eye waist closure Bartacked stress points Heavy duty 7 oz weave fabric Pants are available surged and unhemmed in 37” inseam Reinforced knees Time tested sewn in permanent crease Bartacked belt loops

Fabric Poly / cotton stain repellant twill: 65 % poly / 35% cotton Twill : 60 % cotton / 40 % poly presto wrinkle free Ripstop : 65%poly / 35 % cotton presto wrinkle free Colors : Black, Navy Waist sizes: 28” – 54” (Even sizes)

Fabric Poly / cotton stain repellant twill : 65 % Poly / 35% cotton Twill: 60 % cotton / 40 % poly presto wrinkle free Ripstop: 65%poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

TEN POCKET TROUSER 1042

TEN POCKET TROUSER 1044

Ten pocket trouser Two front slash pockets Two rear velt pockets with button closure Two large cargo pockets with velcro closure Two large cargo pockets with zip closure Two patch pockets with three divisions on cargo pockets with two 1” wide straps with adjustable velcro fastening for securing ems equipment Waist band with silicon row for shirt grip Two waist take up tabs with metal buckles Ykk® heavy duty auto lock brass zipper Double hook and eye waist closure Bartacked stress points Heavy duty 7 oz weave fabric Pants are available surged and unhemmed in 37” inseam Reinforced knees Time tested sewn in permanent crease Bartacked belt loops

Fabric Poly / cotton stain repellant twill: 65 % poly / 35% cotton Twill: 60 % cotton / 40 % poly presto wrinkle free ripstop: 65%poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

204

Head Office: 1-866-652-2877

Fabric Poly / cotton stain repellant twill: 65 % poly / 35% cotton Twill: 60 % cotton / 40 % poly presto wrinkle free Ripstop: 65%poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLOTHING

Uniforms by MDC CLOTHING WORK WEAR 4 POCKET TROUSER 08201 REGULAR 18201 LONG

4 POCKET LADIES PLEATED TROUSER 08107

Total four pocket trouser Two front slash pockets Two rear velt pockets with button closure Ykk® heavy duty auto lock brass zipper Hook and eye closure Bartacked stress points Pants are available surged and unhemmed in 37” inseam Bartacked loops Heavy duty 7 oz weave fabric

Total four pocket ladies pleated trouser Two front slash pockets Two rear velt pockets with button closure Ykk® heavy duty auto lock brass zipper Hook and eye closure Bartacked stress points Pants are available surged and unhemmed in 37” inseam Time tested ladies fit for ultra comfort Bartacked loops Heavy duty 7 oz weave fabric

Fabric Poly / cotton stain repellant twill : 65 % poly / 35% cotton Twill: 60 % cotton / 40 % poly presto wrinkle free Ripstop: 65% poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

4 POCKET PLEATED TROUSER 08225 REGULAR 18225 LONG

4 POCKET LADIES PLEATED TROUSER 18107

Total four pocket pleated trouser Two front slash pockets Two rear velt pockets with button closure Ykk® heavy duty auto lock brass zipper Hook and eye closure Bartacked stress points Pants are available surged and unhemmed in 37” inseam Bartacked loops Heavy duty 7 oz weave fabric

Total four pocket ladies pleated trouser Two front slash pockets Two rear velt pockets with button closure Ykk® heavy duty auto lock brass zipper Gripper waist band with two hook and eye closure Bartacked stress points Pants are available surged and unhemmed in 37” inseam Time tested ladies fit for ultra comfort Bartacked loops Heavy duty 7 oz weave fabric

Fabric Poly / cotton stain repellant twill: 65 % poly / 35% cotton Twill: 60 % cotton / 40 % poly presto wrinkle free Ripstop: 65% poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

4 POCKET LADIES TROUSER 08106

4 POCKET LADIES TROUSER 18106

Total four pocket ladies trouser Two front slash pockets Two rear velt pockets with button closure Ykk® heavy duty auto lock brass zipper Hook and eye closure Bartacked stress points Pants are available surged and unhemmed in 37” inseam Time tested ladies fit for ultra comfort Bartacked loops Heavy duty 7 oz weave fabric

Total four pocket ladies trouser Two front slash pockets Two rear velt pockets with button closure Ykk® heavy duty auto lock brass zipper Gripper waist band with two hook and eye closure Bartacked stress points Pants are available surged and unhemmed in 37” inseam Time tested ladies fit for ultra comfort Bartacked loops Heavy duty 7 oz weave fabric

Fabric Poly / cotton stain repellant twill : 65 % poly / 35% cotton Twill: 60 % cotton / 40 % poly presto wrinkle free Ripstop: 65% poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

Fabric Poly / cotton stain repellant twill : 65 % poly / 35% cotton Twill: 60 % cotton / 40 % poly presto wrinkle free Ripsto : 65% poly / 35 % cotton presto wrinkle free Colors: Black, Navy Waist sizes: 28” – 54” (Even sizes)

East: 1-877-993-9968

205

CLOTHING

Uniforms by MDC CLOTHING SWEATERS SWEATER 91106

SWEATER 91826

‘V’ neck pullover Made in 100% low pill acrylic All stress points in key places 65% Polyester 35% cotton twill patches on shoulders and elbows All patches are double needle stitched Epaulets with velcro closure Machine washable Colors: Black, Navy Sizes: S - 4xl

‘V’ neck pullover Made in low pill 80% acrylic 20 % wool All stress points in key places 65% Polyester 35% cotton twill patches on shoulders and elbows All patches are double needle stitched Epaulets with velcro closure Machine washable Colors: Black, Navy Sizes: S - 4xl

SWEATER 91828

SWEATER 91108

‘V’ neck pullover Made in low pill 80% acrylic 20 % wool 2 X 2 rib knit Turn back cuff All stress points in key places 65% Polyester 35% cotton twill patches on shoulders and elbows All patches are double needle stitched Epaulets with velcro closure Machine washable Colors: Black, Navy Sizes: S - 4xl

‘‘V’ neck pullover Made in 100% low pill acrylic 2 X 2 rib knit All stress points in key places 65% Polyester 35% cotton twill patches on shoulders and elbows All patches are double needle stitched Epaulets with velcro closure Machine washable Colors: Black, Navy Sizes: S - 4xl

LADIES BLAZER

206

3 BUTTON BLAZER 5013

5 BUTTON BLAZER 5015

Single breasted three button ladies blazer Elegant and comfortable fit Perfect for work or casual wear Two double welt pockets

Single breasted five button ladies blazer Elegant and comfortable fit Perfect for work or casual wear Two double welt pockets

Fabric 55% Polyester / 45% wool Colors: Black, Navy Sizes: 4 - 18

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLOTHING

Uniforms by MDC CLOTHING T SHIRTS

HEAD GEAR

JERSEY TOQUE 4011 2 X 2 rib knit Fabric: 100% Acrylic Colors: Black, Khaki Sizes: One size fits most

T-SHIRT 2051

T-SHIRT 2052

Crew neck t-shirt designed for hard use Fabric wicks away moisture to keep you fresh and dry Improves air flow to reduce skin temperature and enhances physical performance Offers protection from harmful uv rays Feels soft and supple Double stitch bottom seams Double stitch sleeve seams

High neck t-shirt designed for hard use Fabric wicks away moisture to keep you fresh and dry Improves air flow to reduce skin temperature and enhances physical performance Offers protection from harmful uv rays Feels soft and supple Double stitch bottom seams Double stitch sleeve seams

Fabric Coolmax ® extreme fx 94%coolmax / 6% spandex Coolmax ® extreme fx 100% coolmax fx Colors: Black, White, Dark Navy Sizes: Xs – 4xl

T-SHIRT 2053

GOLF SHIRT 2061

Turtle neck t-shirt designed for hard use Fabric wicks away moisture to keep you fresh and dry Improves air flow to reduce skin temperature and enhances physical performance Offers protection from harmful uv rays Feels soft and supple Double stitch bottom seams Double stitch sleeve seams

Golf shirt designed for hard use Fabric wicks away moisture to keep you fresh and dry Improves air flow to reduce skin temperature and enhances physical performance Offers protection from harmful uv rays Feels soft and supple Double stitch bottom seams Double stitch sleeve seams

TOQUE 4013

SKULL CAP 4013

Micro denier polyester with plush Velour finish on both sides Excellent warmth for weight ratio Super soft hand and easy drape Superior stretch and recovery helps maintain shape Comfortable to wear

Fabric wicks away moisture to keep you fresh and dry Improves air flow to reduce skin temperature Feels soft and supple Double stitich bottom seams

BACALAVA 4012

Fabric Coolmax ® extreme fx 94% Coolmax / 6% spandex Colors: Black

Fabric Nomex ® IIIA stretch fleece Colors: Black Sizes: One size fits most

Fabric: 100% Polyester Colors: Black Sizes: One size fits most

Head Office: 1-866-652-2877

Fabric Coolmax ® extreme fx 94%coolmax / 6% spandex Coolmax ® extreme fx 100% coolmax fx Colors: Black, White, Dark Navy Sizes: Xs – 4xl

West: (604) 526-1631

Prairies: 1-866-652-2877

Sizes: One size fits most

East: 1-877-993-9968

207

CLOTHING Clothing by TRU-SPEC TROUSERS

MILITARY BDU TROUSERS • Made to US military specification MIL-T-44047E • 6 pocket design • 2 front slash pockets & 2 rear inserted pockets with snag proof pocket flaps • 2 bellowed 3 pleated cargo pockets with drain holes and snag proof button flaps • Fused flaps • 2 adjustable side tabs, secured with 4 bartacks • Reinforced seat & knee patches • 4 Button fly closure • Belt loops with 2-1/4" wide opening, secured with 2 bartacks • Nylon drawstring leg ties • Felled inseam, outseam & seat seam SIZES AVAILABLE: Small - 4XL Regular Small - 3XLarge Long Small - XLarge Short ITEM NO. 1276 1281 1610 1646 1826 1898

COLOUR Woodland Desert 3 colour Desert 6 Colour* City Urban Woodland Desert 3 colour

1276

1281

1610

* Non reinforced seat & knees

1646

1826

1898

208

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLOTHING Clothing by TRU-SPEC MILITARY CLOTHING

1279

MILITARY BDU COATS • Made to US military specification MIL-44048G • 4 pocket design • 2 Chest pockets have snag proof button flaps with bellows and drain holes • Left pocket has pencil pocket opening • 2 Lower pockets are partially bellowed with snag proof button flaps and drain holes • Adjustable 2" wide 3 button cuffs • Fused flaps and collar • Reinforced elbow patches • Concealed snag proof 5 button placket • Felled side seams and sleeves SIZES AVAILABLE Small - 4XL Regular Small - 3XL Long ITEM NO. COLOUR 1270 Woodland 1279 Desert 3 colour 1270

ALL-TERRAIN DIGITAL COMBAT SHIRT • • • • • •

100% Cotton Rip-Stop Construction 2-Slanted Chest Pockets 2-Bellowed Sleeve Pockets With Drain Holes Hook & Loop Pocket Flaps & Cuffs 3-Slotted Pencil Pockets On Sleeves Reinforced Elbow Patch Pockets With Drain Hole and Hook & Loop Opening For Elbow Pads • Concealed Snag Proof Button Placket • Felled Side Seams & Sleeves SIZES: XSmall - 3XLarge Regular & XSmall - 2XLarge Long ITEM NO. 1945

COLOUR All Terrain Digital

1945

ALL-TERRAIN DIGITAL COMBAT TROUSER • • • • • • • •

100% Cotton Construction 8-Pocket Design 2-Slanted Bellowed Cargo Pockets With Hook & Loop Flaps 2-Lower Leg Pockets With Hook & Loop Flaps Felled Outseam & Seat Seam 2-1/4” Belt Loops With 2-Bartacks Reinforced Seat Reinforced Knee Patch Pockets With Hook & Loop Opening For Knee Pads • 4-Button Fly Closure • 2-Adjustable Waist Tabs Secured With 4 Bartacks • Nylon Drawstring Leg Ties SIZES: XSmall - 3XLarge Regular & XS - 2XLarge Long ITEM NO. 1946

COLOUR All Terrain Digital 1946

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

209

CLOTHING Clothing by TRU-SPEC DIGITAL COMBAT APPAREL DIGITAL COMBAT TROUSERS • 6 pocket design • 2 front slash pockets and 2 rear inserted pockets with snag proof flaps • 2 pleated, bellowed cargo pockets with snag proof button flaps • 2 adjustable side tabs, secured with 4 bartacks • Reinforced seat • Reinforced knees with interior pockets for additional padding • 4 button fly closure • Belt loops with 2-1/4" wide opening, secured with 2 bartacks • Felled outseam and seat seams • Nylon drawstring leg ties SIZES AVAILABLE XSmall - 3XLarge Regular XSmall - 2XLarge Long ITEM NO. COLOUR 1939 Digital Urban 1940 Digital Desert 1933 Digital Woodland 1949 Digital Woodland NO INTERIOR KNEE POCKETS

1940 1939

MATERIAL 100% cotton rip-stop - Digital Woodland - Digital Desert or 65/35 Poly/Cotton Twill - Digital Woodland - Digital Desert - Digital Urban

1933

1949

DIGITAL COMBAT SHIRTS • 4-Pocket Design • 2-Slanted Chest Pockets With Hook & Loop Closures & Pencil Pocket Openings • 2-Bellowed Sleeve Pockets Have Snag Proof Button Flaps • Inverted Adjustable Cuff To Prevent Snagging • Reinforced Elbow Patches With Interior Pockets For Additional Padding • Concealed Button Front Placket • Felled Side Seams & Sleeves SIZES AVAILABLE XSmall - 3XLarge Regular XSmall - 2XLarge Long ITEM NO. 1938 1936 1930 1948

1938

COLOUR Digital Urban Digital Desert Digital Woodland Digital Woodland

MATERIAL 100% cotton rip-stop - Digital Woodland - Digital Desert or 65/35 Poly/Cotton Twill - Digital Woodland - Digital Desert - Digital Urban

210

1936

1930

1948

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLOTHING

Clothing by TRU-SPEC ORIGINAL TIGER STRIPE PRODUCTS™

BDU COATS

• Made to US military specification MIL-44048G • 4 pocket design • 2 Chest pockets have snag proof button flaps with bellows and drain holes • Left pocket has pencil pocket opening • 2 Lower pockets are partially bellowed with snag proof button flaps and drain holes • Adjustable 2" wide 3 button cuffs • Fused flaps and collar • Reinforced elbow patches • Concealed snag proof 5 button placket • Felled side seams and sleeves MATERIAL Vietnam Tiger Stripe™ Original Vietnam Tiger Stripe™ Original Desert Tiger Stripe™ Tac Tiger™

60/40 Cotton/Poly Twill 100% Cotton Rip Stop 100% Cotton Rip Stop 65/35 Poly/Cotton Ripstop

1596

SIZES AVAILABLE Small - 4XLarge Regular Small - 3XLarge Long ITEM NO. COLOUR 1901 Original Vietnam Tiger Stripe™ 1596 Original Desert Tiger Stripe™

TIGER STRIPE PRODUCTS

1901

BDU TROUSERS

• Made to US military specification MIL-T-44047E • 6 pocket design • 2 front slash pockets & 2 rear inserted pockets with snag proof pocket flaps • 2 bellowed 3 pleated cargo pockets with drain holes & snag proof button flaps • Fused flaps • 2 adjustable side tabs, secured with 4 bartacks • Reinforced seat & knee patches • 4 button fly closure • Belt loops with 2-1/4" wide opening, secured with 2 bartacks • Nylon drawstring leg ties • Felled inseam, outseam & seat seam MATERIAL Vietnam Tiger Stripe™ Original Vietnam Tiger Stripe™ Original Desert Tiger Stripe™ Tac Tiger™

60/40 Cotton/Poly Twill 100% Cotton Rip Stop 100% Cotton Rip Stop 65/35 Poly/Cotton Ripstop

SIZES AVAILABLE Small - 4XLarge Regular, Small - 3XLarge Long Small - XLarge Short ITEM NO. 1593 1598 1912 1628

COLOUR Original Vietnam Tiger Stripe™ Original Desert Tiger Stripe™ Tac Tiger™ Vietnam Tiger Stripe™

Head Office: 1-866-652-2877

West: (604) 526-1631

1628

Prairies: 1-866-652-2877

1598

East: 1-877-993-9968

1593

1912

211

CLOTHING Clothing by TRU-SPEC BDU SHORTS

• • • • • • • •

6-Pocket Design 2-Bellowed Side Cargo Pockets 2-Front Slash Pockets 2-Rear Inserted Pockets With Snag Proof Pocket Flaps Felled Seam Construction Button Fly Adjustable Waist Tabs 10” Inseam

SIZES AVAILABLE Small - 2XLarge BDU SHORT 60/40 Poly/Cotton Twill ITEM NO. 4230 4238 4263 4222

COLOUR City Urban Vietnam Tiger Stripe Desert 6-Colour Desert 3-Colour

4210

4212

4213

BDU SHORT 100% Cotton Rip-Stop ITEM NO. 4219 4221 4217 4210

COLOUR Original Tiger Stripe™ Original Tiger Desert Stripe™ Woodland Army Digital

BDU SHORT 65/35 Poly/Cotton Twill ITEM NO. COLOUR 4212 Digital Woodland 4213 Digital Desert

4217

4222

212

4230

Head Office: 1-866-652-2877

4219

4221

4238

4263

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLOTHING Clothing by TRU-SPEC TACTICAL SHIRTS

• • • • • • • • • •

2 pocket design Snag proof button flaps 2 bellowed chest pockets with drain holes Left pocket has pencil pocket opening Epaulets on each shoulder Fused flaps & collar Reinforced elbow patches Cuffs have button tab with 3 buttons Concealed snag proof 5-button placket Felled side seams & sleeves

MATERIAL 65/35 poly/cotton rip-stop SIZES AVAILABLE XSmall - 5XLarge Regular XSmall - 3XLarge Long ITEM NO. COLOUR 1428 Tac Tiger™

1428

LONG SLEEVE T-SHIRTS • 50% polyester/50% cotton • Double needle sport collar to prevent neckline from sagging • Full cut body • Minimum shrinkage • Colour fastness for longer wear • Knitted cuff • US made/imported SIZES AVAILABLE Small - 3XLarge ITEM NO. 4384 4385 4382 4383

4382

4384

COLOUR Woodland Army Digital Digital Woodland Digital Desert

4385

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

4383

213

CLOTHING Clothing by TRU-SPEC SHORT SLEEVE T-SHIRTS • 50% polyester/50% cotton • Double needle sport collar prevents neckline from sagging • Full cut body • Minimum shrinkage • Colour fastness for longer wear • US made/imported SIZES AVAILABLE Small - 3XLarge ITEM NO. 4325 4341 4343 4335 4379 4381 4380

4335

COLOUR Woodland Vietnam Tiger City Urban Desert 3-Colour Army Digital Digital Desert Digital Woodland

4341

4379 4380

4381

4325

4343

214

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

CLOTHING Clothing by TRU-SPEC COMBAT CAPS • Meets US military specs • 2-Ply construction COMBAT CAP 65/35 Poly/Cotton Twill SIZES AVAILABLE 6 3/4, 7, 7 1/4, 7 1/2, & 7 3/4 ITEM NO. COLOUR 3237 Digital Urban 3247 Digital Woodland COMBAT CAP 65/35 Poly/Cotton Ripstop ITEM NO. 3248 3254 3266 3267 3268

COLOUR Tac Tiger™ Black Navy Grey Khaki

3237

3247

3248

3249

3252

3263

COMBAT CAP 50/50 Nylon/Cotton Ripstop ITEM NO. 3249 3252 3263

COLOUR Desert 3 Colour Woodland Army Digital ACU

3254

Head Office: 1-866-652-2877

West: (604) 526-1631

3266

Prairies: 1-866-652-2877

3267

East: 1-877-993-9968

3268

215

DUTY GEAR

Standard Nylon Products by MDC NYLON

BELTS, STRAPS, BUCKLES

OUTER DUTY BELT

RIGID DUTY BELT

OUTER DUTY BELT WITH COP LOCK BUCKLE

Tough and hard-wearing black Cordura nylon. Quickdetach buckle. 2" wide. Available in waist sizes 24" to 60". Accessories sold separately.

Tough and hard-wearing black Cordura nylon. Quick-detach buckle. 1.5" wide. Available in waist sizes 24" to 60". Accessories sold separately.

Tough and hard-wearing black Cordura nylon. Buckle Features a 3 pressure point release system. 2 1/4" wide only. Available in waist sizes 24" to 60". Accessories sold separately.

NW201-10 to NW201-19

NW201-20

INNER DUTY BELTS

PLAIN CLOTHES DUTY BELT

COP LOCK BUCKLE ONLY

Nylon and Velcro construction. Designed to protect clothing from the Velcro on outer duty belt and accessories. Attaches to outer belt with Velcro and belt keepers (sold separately). Available in waist sizes 28" to 52".

Tough and hard-wearing black Cordura nylon. 1.5" wide. Available in waist sizes 24" to 60". Accessories sold separately.

Tough and hard-wearing black Cordura nylon. Buckle features a specially-designed 3 pressure point release system for maximum security. 2 1/4" wide.

NW257

NW201COPLO

BELT KEEPER STRAPS DOUBLE SNAP BELT KEEPER

3⁄4", 1", 11⁄2" INNER BELT KEEPERS

Double-snapped for higher security, this fine-quality belt keeper is made of high quality Cordura nylon for long-lasting durability.

Fully adjustable belt keeper, this durable item includes velcro for much of its length for full-option use. NW86-12, 13, 15

NW86-11

BELT KEEPER WITH DUTY BELT ATTACHMENT

D-RING BELT KEEPER

1" wide black webbing. Available with double (shown) or single snaps. Sold in pairs.

Cordura nylon web & velcro. NW86-10

NW88-14

CANINE STRAPS

DOG LEASHES VARIOUS LENGTHS

DOG HOBBLE

DOG HARNESS

Hobble in 50" length. Made of tough, Cordura nylon, to specifications from experience in the field.

Removable reflective patches. Quick detach release buckle. Made from black Cordura nylon.

NWHOBBLE NWHOBBLE11

With nylon case.

NW100-20

Available with nickel or brass release buckle. Made from black Cordura nylon. NW100-14 NW100-15 NW100-16 NW100-17 NW100-30 NW100-31

6' NIckel 6' Brass 18' NIckel 18' Brass 30' NIckel 31' Brass

RIOT DOG LEASH Available in various lengths. Double release buckles available in nickel or brass. Made from black Cordura nylon. ASFDASFD

216

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Nylon by MDC NYLON HANDCUFF HOLDERS - HANDCUFFS SOLD SEPARATELY CUFF POUCH

HIATT ULTIMATE HANDCUFF CASE

Unpadded, to ensure compactness; snap back to ensure security. This absolutely nononsense cuff case is ready for any belt and any situation.

This Duty Nylon handcuff case is made of rugged Cordura nylon and are constructed to more than stand up to the daily strain of professional use.

NW204-12

NW219-13

TAPERED CUFF CASE This Duty Nylon open-top tapered cuff case is designed for fast deployment of cuffs. Tapered to reduce size to a minimum, the TAPERED CUFF CASE is ideal for the officer who like to have his equipment ready at hand.

DOUBLE HANDCUFF CASE Made of study, black Cordura nylon, Velcro closure. Fits two pairs of standard handcuffs. NW204-14

NW204-16

PADDED HANDCUFF CASE WITH LATEX GLOVE POUCH A very handy piece of equipment, this case holds also another item considered indispensable in many modern detachments. Latex gloves are ready at hand, right where your cuffs are - one reach, two items. Fits all standard handcuffs.

OVERSIZE HANDCUFF CASE Made of study, black Cordura nylon, Velcro closure. Fits all standard and oversize handcuffs. NW204-17

NW204-10

DOUBLE PADDED HANDCUFF CASE WITH GLOVE POUCH PADDED HANDCUFF CASE

Fits all standard handcuffs, yet with an extra level of padding to ensure comfort in all positions. Latex gloves are never farther than where you're already reaching - for your handcuffs. Double ready.

Made of study, black Cordura nylon, Velcro closure. Fits all standard handcuffs. NW204-13

NW204-15

PADDED DOUBLE CUFF POUCH & ULTIMATE SPEEDCUFF HOLDER CONCEALMENT CUFF & MAG HOLDER

Made of sturdy, black Cordura nylon Padded for comfort and to give added protection to the handcuffs. Flap is Velcro secured. Wraps on to duty belt with secure velcro web wrap. Holds most Hiatts handcuffs (see HANDCUFFS). Also available with extra outside pocket to hold one pair latex surgical style gloves. Nonpadded, economy style also available with an additional glove pouch on front

Cordura Nylon 1/8â&#x20AC;? closed cell pouch. Comes with stiffened plastic web and velcro adjustable compartments. Slide on belt loops right & left. NW219-14

BIKINI CUFF POUCH FOR SHOULDER Cordura Nylon. For shoulder holster. Comes with plastic reinforcement.

NW219-13 NW204-14 NW204-15

BIKINI STYLE CUFF HOLDER

HANDCUFF & GLOVE POUCH

Belt holder for chain cuffs, with belt wrap

Made of sturdy, black Cordura nylon Padded for comfort and to give added protection to the handcuffs. Flap is Velcro secured. Wraps on to duty belt with secure velcro web wrap Holds most Hiatts handcuffs (see Hiatts). Also available with extra outside pocket to hold one pair latex surgical style gloves. Non-padded, economy style also available

NW219-10

NW219-11

NW204-10

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

217

DUTY GEAR

Nylon by MDC NYLON RADIO, MICROPHONE, PAGER, CELLPHONE HOLDERS RADIO CHEST HOLDER Fully adjustable harness. Nylon & Poly webbing. Nylon fabric & foam padding. Adjusts to fit most radios. NWM023

RADIO HOLDER FOR SHOULDER HARNESS Secure radio holder for shoulder harness. Made of heavy-duty Cordura nylon. NW112-16

NYLON PIVOTING RADIO HOLDER

NYLON SMALL CELL PHONE HOLDER

Enables easy adjustment of radio on equipment harness. Cord tightener, snap closure.

Fits on duty belt. Also available in small and TACSTAR.

NWM111-10SGT

NWPB327C

RADIO BELT HOLDER

PAGER HOLDER

Made of rugged, moisture resistant black Poly & Nylon Webbing. Velcro secured strap retains radio snugly. Snaps on to duty belt with two one-way snaps. Reinforced at stress points for durability. When ordering, please specify make of radio. Also available (not shown): 2" wide, black nylon radio mike shoulder holder.

Made of black webbing. Available with clear top to read pager. Reinforced for durability. Velcro flap holds Pager securely. Enables a standard pager to attach to a 21â &#x201E;4" duty belt. NW 112-13

NW112-10

BLACK PAGER CLIP-ON FLAP

LOOMIS SWIVEL

Enables most pagers to attach to a duty belt.

Fits on duty belt. Also available in small and TACSTAR.

NW112-14

NWM025S

RADIO MICROPHONE HOLDER Made of black Cordura nylon. Secures to epaulet button on shoulder. Enables easy transmission to a radio microphone. NW112-12

COURIER SCANNER BRACKET ONLY

COURIER SCANNER BRACKET & BELT LOOP

NWM0256B

M025

LESS LETHAL POUCHES AND HOLDERS

SOFT NYLON BATON HOLSTERS These sturdy holsters made from divers web (a tighter and stiffer weave) are designed specifically for expandable batons - in all sizes. Please specify baton size when ordering - Crafted from sturdy, black divers web nylon - Velcro secured flap keeps baton firmly in place until needed - Baton holder snaps on to duty belt with oneway snaps for added security - Please specify baton size when ordering - Expandable batons sold separately

218

Head Office: 1-866-652-2877

SOFT NYLON OC SPRAY HOLDERS Crafted from rugged yet lightweight black Cordura nylon with divers web. Designed to fit Defense Technology Corp. of America's range of OC canisters - Mk3, Mk4, and Mk6 (Mk6 not shown). OC canisters are sold separately. Velcro secured flap keeps canister firmly in place until needed. Snaps or slides on to duty belt - please specify. West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR Nylon by MDC NYLON ASSORTED HOLDERS D-RING HOLDER

KEY HOLDERS

FLASHLIGHT BELT RING STRAP

Flashlight holder made of sturdy Cordura nylon. Fits C and D-cell flashlights. Simple "drop-in" style holds flashlight securely by neck. Rides high on duty belt with double one-way snaps on back

Fits D-cell flashlights (sold separately). Simple "drop-in" style holds flashlight securely by neck Double snaps to duty belt. NW76-10

NW76-11 wrap snap to belt

SILENT KEY RING HOLDER Handy, compact key holder made of moisture resistant, black Cordura nylon Velcro secured closure quietly holds keys. Snaps on to duty belt with two one-way snaps.

STRAIGHT BATON RING Double snap NW82

21" EXPANDABLE BATON HOLDER Velcro closure. NW92-11

FLASHLIGHT HOLDER

Holds STREAMLIGHT Stinger FLASHLIGHT. Velcro closure.

Holds STREAMLIGHT Scorpion FLASHLIGHT. Velcro closure.

NW76-12

NW76-15

NW88-10

KEY STRAP Made of black Cordura nylon. Reinforced for durability. Double snaps to duty belt. NW-84D

8X & 6P FLASHLIGHT HOLDER Fully encased pouch made of moisture resistant Cordura nylon. Designed for the SUREFIRE 8X, sold separately. Velcro flap folds over and holds the 8X securely. Oneway snaps hold flashlight case securely to duty belt. Reinforced at all stress points for durability. NW76-13 8x NW76-14 8x with open top NW76-15 6p

AA FLASHLIGHT HOLDER Made of Cordura nylon, with Velcro closure, this holder both secures and protects your investment. NW93-20

MINI FLASHLIGHT HOLDER Compact, fully enclosed pouch made of rugged, moisture resistant, black Cordura nylon. Also fits MANY makes of mini-flashlights. Velcro flap folds over and holds flashlight securely. Reinforced at all stress points for added durability. Snaps on to duty belt with one-way snaps. NW93-12 NW93-20 NW93-22

GRIZZLY SCABBARD The famous Grizzly Scabbard - one of our most popular nylon items. Constructed of heavy duty, moisture resistant, reinforced black Cordura nylon. Padded shoulder straps for extra comfort. Fits any rifle or shotgun. Top strap with Velcro closure keeps weapon secure. Quick-release buckles. Belt loops keep scabbard anchored securely on back. Unlimited harness adjustability for wearer's comfort. Drain eyelet on bottom

Fixed Belt Loop Flap Top, Wrap snap to belt Flap top, Fixed belt loop

DELUXE GUN FANNY PACK Crafted from reinforced, tough, black Cordura nylon. Moisture resistant. Looks like a normal waist pack but has secure retention inside for concealed handgun. Accommodates most medium frame revolvers and semi-automatics. Quick-release snap permits fast access to weapon. Tough nylon webbing straps. Large outside zippered compartment.

Product #: GRIZS

DUTY SUSPENDERS Made of Nylon and elastic. Distributes weight from duty belt for greater comfort and efficiency in both stand-down and emergency situations. NWSUSP

NW13-10 - NW13-15 NW13-10 Fanny Pack Deluxe - includes zipper pouches on the side wings. Contained in the main pouch is the holster and 2 extra holders for accessories.

CANTEEN BELT POUCH

NW13-11 Fanny Pack Regular includes zipper pouches on the side wings and holster in main pouch

Made of rugged, water resistant black nylon. Holds a 1 litre bottle or canteen. Attaches to a standard duty belt

NW13-12 Fanny Pack Thin Profile includes a holster in the main pouch. No wings as shown on left. NW13-14

Fanny Pack for M26 Tazer

NWCANTEEN

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

219

DUTY GEAR Nylon by MDC NYLON

HOLSTERS

SHOULDER HOLSTERS MDC NYLON SHOULDER HOLSTERS - HORIZONTAL

MDC NYLON SHOULDER HOLSTERS - VERTICAL

Made from rugged, black Cordura nylon. Fully adjustable harness for snug and comfortable vertical ride. Safety strap keeps weapon secure. Accommodates most medium and large frame revolvers and semiautos. When ordering please specify right or left hand. Optional accessories fit securely to harness on opposite side from weapon.

NYLON SHOULDER HOLSTER ACCESSORY SINGLE MAGAZINE & CUFF

NYLON SHOULDER HOLSTER ACCESSORY 2 MAGAZINE AND CUFF

Necessary addition to the undercover officer's kit: holds magazine, cuff. Made of durable Cordura nylon.

All-in-one accessory for the undercover officer: holster, magazine holder, cuff case in one place.

NW204-10 & NW204-10S

NWPC-25L

SHOULDER HOLSTER HARNESS

ACCESSORY TIE DOWN

Fully adjustable harness for any shoulder holster. Constructed of highly durable Cordura nylon, this harness is built for strength and discreetness.

Helps hold shoulder holster in place on torso, particularly at critical moment of quick draw. Cordura nylon, snap.

NWHARS

NWACCSTRAP

TASER HOLSTERS COMBINATION TAZER HOLSTER & MK3 OC HOLDER

M26 TASER VERTICAL SHOULDER HOLSTER

The Less-Lethal special. TAZER combines with OC in this handy shoulder combination. Built of sturdy Cordura Nylon, OC closure is nylon.

Available in right or lefthanded versions. NWSH65-R

NWPC26R

HORIZONTAL SHOULDER HOLSTER FOR GLOCK 22/17 FIREARMS

HORIZONTAL SHOULDER HOLSTER FOR S&W SERIES 59, BERETTA, SIG SAUER

Level 1 security horizontal pancake holster. Made of tough, Cordura nylon for long-lasting reliability. Horizontal draw for quick response. Built to accommodate many stock and modified models. Specify left or right hand.

NWSH11R

NWSH-10R

NWSH-32R

220

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Nylon by MDC NYLON THIGH HOLSTERS AND BANDOLIERS MDC NYLON SAS STYLE THIGH HOLSTERS Vertical style thigh holster. Made from reinforced black Cordura nylon. Fully adjustable Velcro straps keep thigh holster securely fastened to leg and belt. Quick-release buckle secures flap. Accommodates most medium and large frame revolvers and semi-autos. Models also available to hold weapons with attached tactical light. When ordering please specify left or right hand models. Below is a small sample of available products.

SAS STYLE VERTICAL HOLSTER FOR S&W 59, BERETTA, SIG SAUER W/3VTAC LIGHT

SAS STYLE FOR S&W 59, BERETTA, SIG SAUER W/ 6V TAC

SAS style, level 1 security vertical holster for S&W Model 59 Series, BERETTA, SIG-SAUER. Built to accommodate weapon with 3 V Tac light installed. Specify left or right.

SAS style vertical holster for S&W Model 59 Series, BERETTA, SIG SAUER models. Built to accommodate weapon with attached 6 V Tac light.

NWTH-30R

NWTH50R

DETACHABLE SAS 20 ROUND 12 GAUGE AMMO POUCH

MP5 60 ROUND THIGH POUCH

This extremely durable ammo pouch is designed to attach to belt and thigh for quick access and outof-the-way convenience.

HORIZONTAL MAGAZINE HOLDER FOR S&W SERIES 59, BERETTA, SIG SAUER

DOUBLE SPEEDLOADER POUCH This double speedloader pouch is designed for maximum readiness. Made of Cordura nylon, it features snaps rather than Velcro fasteners for maximum stealth.

NWSASMP5M

Made of study, black Cordura nylon. Reinforced at all stress points. Snaps securely on to duty belt with one-way snaps. Available in horizontal or vertical carry. Choice of single or double. When ordering please specify weapon Single NW220-10

Made of durable Cordura nylon, this speedloader pouch is specially designed for law enforcement by designers with experience in law enforcement. NW103-10

Holds three 20 round MP5 magazines. Made of durable Cordura nylon, this bandolier is made to last. Snap closure.

NWMPRIOT

SINGLE SPEEDLOADER POUCH

NW103-13

Double NW220-20

HANDCUFF, MAG, GLOVE, PAGER, OC SPRAY HOLDERS IN DELUXE NYLON RCMP SPEC TASER THIGH HOLSTER

RCMP SPEC M26 TASER BELT HOLSTER

High quality taser thigh holster built to RCMP specifications. Two holders for replacement air cartridges. Available in both left and right configurations.

High quality taser belt holster built to RCMP specifications. Two holders for replacement air cartridges. Available in both left and right configurations.

NDTH67L & R

NDTH69L & R

DELUXE RADIO UNIVERSAL HOLDER

DELUXE PARAMEDIC KIT CASE

Made of rugged, moisture resistant black Poly & Nylon webbing. Velcro-secured strap retains radio snugly. Snaps onto duty belt with two one-way snaps. Reinforced at stress points for durability. When ordering please specify make of radio.

Designed for the emergency professional, this high-quality case will protect sensitive items safely and securely. NDH200

ND112-10

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

221

DUTY GEAR Nylon by MDC NYLON

HOLDERS AND POUCHES AND BAGS TEARGAS HOLDER WITH FLAP

MK21/46 SLING HOLDER

Belt holder for standard teargas grenades.

Wrap holder comes with shoulder strap. NW92OC-62

MK 9 OC SPIDER WRAP HOLDER

NW92DD

Web wraps around to hold canister yet allows easy access & use even when still on the belt.

MK-3 OC CANISTER HOLDER Cordura nylon. Velcro closure.

NW92OC-50

NW920C-10

#25 DISTRACTION DEVICE BELT POUCH

MK-46 OC BACKPACK Crowd-control sized backpack for pepperspray. Made of high-durability Cordura nylon.

Designed for DEFENSE TECHNOLOGY distraction devices, this pouch integrates seamlessly into your kit. NW92DD - Single Pouch NW92DD10 - Double Pouch

NW-920C-64

GAS MASK THIGH BELT POUCH

#25 DOUBLE DISTRACTION DEVICE THIGH POUCH

Made of rugged nylon. Will hold most models of gas masks available on the market today. Attaches to a standard duty belt.

Made of durable Cordura Nylon, and held very secure with redundant buckles, this DD thigh pouch is designed to ensure devices are well within reach at all times. Will also hold #92 grenade.

NWM004

NW92DD-11

NYLON CARRY BAG FOR SA200 LAUNCHER

SURVIVAL GLOVE POUCH

NWPSA200

Made of tough, Cordura nylon, equipped with side magazine pouches.

Handy, compact pouch made of black Cordura nylon. Holds one pair of latex surgical gloves. Flap folds over and is Velcro secured to duty belt. Gloves not included

NOTEBOOK HOLDER Notebook holder made of Cordura nylon with clear plastic front. NWM011

NW77

NYLON BADGE WALLET

NOTEBOOK HOLDER

NWWALLET

Nylon Note Book NWM013

TICKET BOOK FLIP PORTFOLIO

HOLDER FOR LEATHER GLOVES

NWM013B

Cordura fabric and webbing construction. Velcro closure. Comes with snap belt loop. NW77-10

HOLDER FOR LEATHER GLOVES

HELMET CARRYING BAG

Cordura fabric and webbing construction. Velcro closure. Comes with snap belt loop.

Packcloth Nylon 200D. Waterproof coating. Business card Slot. Drawstring closure. NW-HELMETBAG-1 NW-HELMETBAG-2 Zippered helmet bag lightly padded- not shown

NW77-10

222

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

DELUXE Nylon by MDC NYLON HANDCUFF, MAG, GLOVE, PAGER, OC SPRAY HOLDERS IN DELUXE NYLON THERMAL FORMED CUFF POUCHES Our top quality nylon products are made in Canada to serve the needs of Canadian peace officers. All DELUXE items are made of rugged CORDURA NYLON DIVERS

WEB (a tighter, stiffer weave) and are constructed to more than stand up to the daily strain of professional use.

SINGLE HANDCUFF CASE

SINGLE HANDCUFF CASE WITH LATEX GLOVE POUCH

Single handcuff case fits all standard cuffs. Made of sturdy, black Cordura nylon. Padded for comfort and added protection to the cuffs. Flap is snap secured. Velcros on to any leather or nylon duty belt. Holds most Hiatts Handcuffs.

Single cuff pouch, with latex glove pouch. Fits all standard cuffs. Made of sturdy, black Cordura nylon. Padded for comfort and added protection to the cuffs. Flap is snap secured. Velcros on to any leather or nylon duty belt. Holds most Hiatts Handcuffs.

ND204-13

ND204-10

DOUBLE HANDCUFF CASE

DOUBLE CUFF POUCH WITH LATEX GLOVE POUCH

Double handcuff case fits all standard cuffs. Made of sturdy, black Cordura nylon. Padded for comfort and added protection to the cuffs. Flap is snap secured. Velcros on to any leather or nylon duty belt. Holds most Hiatts Handcuffs.

Double cuff pouch, with latex glove pouch. Fits all standard cuffs. Made of sturdy, black Cordura nylon. Padded for comfort and added protection to the cuffs. Flap is snap secured. Velcros on to any leather or nylon duty belt. Holds most Hiatts Handcuffs.

ND204-15

ND204-10

GLOVE OR PAGER POUCH

THERMAL FORMED NYLON BATON HOLSTERS

Handy, compact pouch made of black Cordura nylon. Holds one pair of latex Surgical gloves. Flap folds over and is Velcro secured to duty belt. Gloves / pager not included.

Crafted from sturdy, black divers web nylon. Snapsecured flap keeps baton firmly in place. Baton holder velcros onto duty belt. Please specify baton size when ordering. Expandable batons sold separately.

ND112-13

ND92-12

ND92-11, ND92-13, ND92-14

THERMAL FORMED NYLON CLIP HOLSTERS

THERMAL FORMED NYLON OC SPRAY HOLDERS

Finely crafted from durable black Cordura nylon. Reinforced at all stress points. Velcros securely on to any nylon or leather duty belt. Available in horizontal or vertical carry. When ordering, please specify weapon.

Crafted from rugged yet lightweight black Cordura nylon with web belt wraps. Designed to fit Defense Technology Corp. of America's range of OC canisters - Mk3, Mk4. OC canisters are sold separately. Snap secured flap keeps canister firmly in place until needed. Velcros onto duty belt.

ND220-21, ND220-22, ND220-24 - ND220-26

ND92OC-23 MK4 ND92OC-13 MK3

Single ND220-12

Double ND220-22 THERMAL FORMED MAG NYLON HOLDERS Compact, fully enclosed pouch made of rugged, moisture resistant, black Cordura nylon. Snap flap folds over and holds flashlight securely. Reinforced at all stress points for added durability. Velcro fasteners will affix to any duty belt.

SINGLE MAG CASE WITH SNAP CLOSURE High quality scabbard for professional equipment. Protect your investment. ND220-10 - ND220-13

Mini Flashlight 8x Flashlight

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

ND93-20

ND76-13

223

Duty Gear Nylon by HATCH gear bags A6 – munitions bag

G3 – giant swat bag

e4 – exotech® carry bag

The Hatch A6 is designed to organize a 37/40mm launcher and plenty of munitions. Features two clear vinyl document pockets (one interior, one exterior) and several large exterior zipper pouches for additional gear. Constructed of durable 1000 denier Cordura® nylon and heavy-duty hardware with two molded rubber carry handles. Two-inch wide padded nylon shoulder straps allow the A6 to be carried as a backpack and can be stowed away when not in use. Durable 600 denier polyester and 420 denier nylon inside with PVC binding

The G3 has a large open-cavity design for carrying a wide variety of gear. Construction consists of a 600 denier, water resistant polyester shell with PVC backing and heavy-duty reinforced handles and straps. Nylon web carry handles are on both the sides and ends. The G3 may be worn as a backpack using the 2 inch wide (5 cm) padded adjustable straps affixed to the bottom. The exterior features two zippered mesh end pockets and a total of five clear vinyl map/document pockets on the top and sides. The interior has four expandable zippered mesh pockets, four zippered pockets and one zippered pouch with padded walls for fragile gear

This bag is designed to carry and store the ExoTech riot suit.. Constructed of 1000 denier Cordura® nylon. Nylon web carry handles are on both sides and ends. Features a separate helmet section. Padded shoulder strap

Dimensions • 17 1/4”L x 11 3/4”W x 4”H (43.8 cm x 29.9 cm x 10.2 cm)

Dimensions • 41.5”L x 14”W x 12”H (105.4 cm x 36 cm x 35.5 cm)

M2 – mission specific gear bag

Patrol Duty bag For all your essential gear, the D1 is constructed of 840 denier, water-resistant nylon with PVC backing and features heavy-duty zippers and removable nylon web shoulder strap.. The spacious interior compartment has an adjustable divider and removable rigid bottom, two zippered cargo pockets and six pen/pencil pockets. The exterior features two zippered cargo pockets, two

Dimensions • 40”L x 15”W x 16”H (102 cm x 38 cm x 41 cm) • Large interior compartment: 26”L x 15”W x 16”H (66 cm x 38 cm x 41 cm) • Small interior compartment: 14”L x 15”W x 16”H (36 cm x 38 cm x 41 cm)

flip-top pockets, and three open-top pockets. Hook and loop straps on the padded top can secure a baton or flashlight Dimensions • 25”L x 10”W x 12”H(63.5 cm x 25.5 cm x 30.5 cm) • Interior compartment 18”L x 8”W x 12”H(45.7 cm x 20.3 cm x 30.5 cm)

D1-Black D1-Blue

The M2 is designed to carry riot or SWAT gear and includes a separate helmet storage area. Quality construction consists of 1000 denier, water-resistant Cordura® nylon, heavy-duty zippers and removable nylon web shoulder strap.. Nylon web carry handles are on both the sides and ends. Removable rigid bottom in the main compartment and padded exterior walls in the helmet compartment. Three zippered cargo pockets and two zippered mesh pockets on the exterior hold a wide variety of items. Hook and loop straps on the padded top can secure a baton or flashlight Dimensions • 34”L x 13”W x 12”H (86.4 cm x 33 cm x 30.5 cm) • Large interior compartment: 20”L x 12”W x 12”H (50.8 cm x 30.5 cm x 30.5 cm) • Small interior compartment: 14”L x 12”W x 12”H (36 cm x 30.5 cm x 30.5 cm)

Hook and loop straps to secure a baton or flashlight 840 denier, water-resistant nylon with PVC backing Two zippered cargo pockets Three open-top pockets Two flip-top pockets Spacious interior compartment has an adjustable divider and removable rigid bottom, two zippered cargo pockets and six pen/pencil pockets

224

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Duty Gear by GOULD & GOODRICH BELTS

VELCRO CLOSURE PANTS BELT B2001

NO-CRUSH DUTY BELT X54

VELCRO LINED PANTS BELT X55

1-1/2 in. wide, no-buckle style with Velcro closure. • Black DuraWeb Nylon

Sam Browne belt with grab-resistant buckle. Full 2-1/4 in. width for firm holster platform. Velcro lined, interlocks with Velcro in model X55 pants belt for more stability. Handsome edge trim. • Black Ballistic Nylon

1-1/2 in. wide, no-buckle style. Fully lined in Velcro. Interlocks with Model X54 or X50 Duty Belt for more stability. • Black Ballistic Nylon

PANTS BELT K52

VELCRO LINED PANTS BELT K55

VELCRO LINED DUTY BELT K56

Weatherproof polymer Garrison Belt, 1-3/4 in. wide, is durable and scuff resistant. Removable buckle. • Black or Black Weave • Brass or Nickel Hardware

1-1/2 in. wide, no-buckle style pants (Garrison) belt. Fully lined in Velcro. Velcro mates with K56 Sam Browne Duty Belt for more stability. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave

Full Velcro lining mates to K55 pants belt for more stability. No-buckle style with fancy stitching. Hidden brass hooks keep belt securely fastened. 2-1/4 in. wide. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave

LINED DUTY BELT K59FL

LINED DUTY BELT, 4 ROW STITCHED K59FL4R

E-Z SLIDE DUTY BELT, 4 ROW STITCHED K49FL4R

Removable buckle. Fully lined. 2-1/4 in. wide. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Hardware

Removable buckle. Fully lined. Attractive 4 row stitching. 2-1/4 in. wide. Weatherproof polymer laminate is durable and scuff resistant. • Black Only • Brass or Nickel Hardware

Removable E-Z Slide buckle. Fully lined. Attractive 4 row stitching. 2-1/4 in. wide. Weatherproof polymer laminate is durable and scuff resistant. • Black Only • Brass or Nickel Hardware

VELCRO LINED DUTY BELT X56

NO-CRUSH DUTY BELT X50

E-Z SLIDE DUTY BELT K49FL

Full Velcro lining interlocks with Velcro lined X55 pants belt for more stability. No-buckle style. Hidden brass hooks keep belt securely fastened. 2-1/4 in. wide. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. • Black Ballistic Nylon

Sam Browne DuraWeb duty belt with grab-resistant buckle. Full 2-1/4 in. width for firm holster platform. Velcro lined, interlocks with Velcro in model X55 pants belt for more stability. • Black DuraWeb Nylon

Removable E-Z Slide buckle. Fully lined. 2-1/4 in. wide. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Hardware

B115 RANGER DUTY BELT • 2 1/4” wide • 1 1/2” wide billet • Removable buckle — specify nickel or brass • Fully lined • Stocked in even sizes 24” to 60” Black Leather or Black Weave Leather

190 REINFORCED DRESS BELT This belt is a “must” for concealed weapon carry. It won’t sag with the weight of a holster and weapon. It provides a firm platform for carrying your holster comfortably, drawing your weapon consistently. Removable solid brass buckle. • For 1 1/4” belt, order 190 or B190 • For 1 1/2” belt, order 191 or B191 Chestnut Brown or Black

189 RESTRAINING BELT • Thick, rugged and durable • Features heavy duty roller buckle and “D” ring • “D” ring accepts most chain and hinged handcuffs and restraining chains • One size adjusts 32 to 56” Russet Leather

125G PANTS BUCKLE

123 E-Z SLIDE BUCKLE

125SB DUTY BELT BUCKLE

Nickel or brass replacement buckle for Model B52 and other standard 1-3/4 in. pants (Garrison) belts.

Nickel or brass replacement buckle for E-Z Slide duty belt, including models B49, B49FL, B49FL4R, K49, K49FL and K49FL4R.

Nickel or brass replacement buckle for Sam Browne duty belt, including models B59, B59FL and B59FL4R.

BUCKLES

West: 1-866-652-2877

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

225

DUTY GEAR

Leather by GOULD & GOODRICH DUTY BELTS DUTY LEATHER™ BY GOULD & GOODRICH B49FL E-Z SLIDE DUTY BELT Removable E-Z Slide brass or nickel buckle. 2-1/4 in. wide. Tanned to conform to body. Fully lined. Stocked in even sizes 24" to 60". Black Leather, Black Weave Leather or Hi-Gloss Porvair B49FL4R E-Z SLIDE DUTY BELT Four Row Stitched Removable E-Z Slide brass or nickel buckle. Fully lined. Attractive 4 row stitching. 2-1/4 in. wide. Tanned to conform to body. Stocked in even sizes 24" to 60". Black Leather or Hi-Gloss Porvair B59FL FULLY LINED DUTY BELT Removable nickel or brass buckle. 2-1/4 in. wide. Tanned to conform to body. Stocked in even sizes 24" to 60". Black Leather, Black Weave Leather or Hi-Gloss Porvair B59FL4R FULLY LINED DUTY BELT Four Row Stitched Removable nickel or brass buckle. Fully lined. Attractive 4 row stitching. 2-1/4 in. wide. Stocked in even sizes 24" to 60". Black Leather or Hi-Gloss Porvair B115 RANGER DUTY BELT Fully lined with removable buckle. 2-1/4 in. wide with 1-1/2 in. wide billet. Tanned to conform to body. Stocked in even sizes 24" to 60". Black Leather or Black Weave. B192 SALLY BROWN LADIES’ DUTY BELT Accommodates the curve of ladies’ hips. More comfortable, gives firmer draw. Fully lined with removable buckle. 2-1/4 in. wide. Removable nickel or brass buckle. Stocked in even sizes 24" to 48". Black Leather, Black Weave Leather or Hi-Gloss Porvair B52 PANTS BELT Top grain leather Garrison Belt, 1-3/4 in. wide, is tanned to conform to body. Removable brass or nickel buckle. Black Leather, Black Weave Leather or Hi-Gloss Porvair. Stocked in even sizes 28" to 60" B55 VELCRO LINED PANTS BELT 1-1/2 in. wide, no-buckle style pants (Garrison) belt. Fully lined in Velcro. Velcro mates with B56 Sam Browne Duty Belt. Tanned to conform to body. Stocked in SM (28 to 32"), MD ( 34 to 38"), LG (40 to 44"), XL (46 to 50"), XXL (52 to 56"). Black Leather or Black Weave Leather B56 VELCRO LINED DUTY BELT Full Velcro lining mates to B55 pants belt. No-buckle style with fancy stitching. Hidden brass hooks keep belt securely fastened. 2-1/4 in. wide. Stocked in even sizes 26" to 60". Black Leather or Black Weave Leather B57 VELCRO CLOSURE PANTS BELT 1-1/2 in. wide, no-buckle style pants (Garrison) belt. Tanned to conform to body. Stocked in SM (28 to 32"), MD ( 34 to 38"), LG (40 to 44"), XL (46 to 50"), XXL (52 to 56"). Black Leather or Black Weave Leather

GOLD LINE™ BY GOULD & GOODRICH 190

191

226

SHOOTER'S BELT Improved reinforcement makes this belt a MUST for concealed weapon carry. Won’t sag with a holster and weapon. Provides a firm platform for a smooth draw. Gives all-day comfort. Removable brass buckle. Chestnut Brown or Black For 1 1/4" belt, order 190 For 1 1/2" belt, order 191

West: 1-866-652-2877

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Duty Gear by GOULD & GOODRICH HOLSTERS

West: 1-866-652-2877

DOUBLE RETENTION HOLSTER B5306

HI-RIDE HOLSTER B5309

Grab-Resistant. Dual trigger guard locks help resist attempted gun grabs. Rapid forward-then-up draw. Mid-Ride. DuraPro rigid middle. Fully lined. Belt locking screws for a reliable draw. For belts up to 2-1/4 in. • Black DuraWeb Nylon

Straight-up draw gives fast access to your weapon. Easy-adjust hammer strap. Fully lined to protect your gun finish. Separate belt slots for 1-3/4 in. or 2-1/4 in. belt. • Black DuraWeb Nylon

MID-RIDE HOLSTER B5310

DOUBLE RETENTION HOLSTER B5315

Straight-up draw gives fast access to your weapon. Easy-adjust hammer strap. Fully lined to protect your gun finish. Separate belt slots for 1-3/4 in. or 2-1/4 in. belt. • Black DuraWeb Nylon

Hi-Ride. Grab-Resistant. Dual trigger guard locks help resist attempted gun grabs. Rapid forward-then-up draw. DuraPro rigid middle. Fully lined. Belt locking screws for a reliable draw. For belts up to 2-1/4 in. • Black DuraWeb Nylon

INSIDE TROUSER HOLSTER 890 AND B890 • Reinforced top band prevents holster from collapsing with gun removed, stays open for easy reholstering • Clips over pants, skirt or belt • Genuine leather • Easy to use, easy to conceal • Sizes for most Auto-Pistols and Revolvers • In right- or left-hand versions • Clips to belts up to 1 3/4” Chestnut Brown or Black

ADJUSTABLE TENSION DUTY HOLSTER X339

DOUBLE RETENTION DUTY HOLSTER X340

Easy, straight-up draw. Mid-ride. Fits belts up to 2-1/4 in. Phoenix Advantage-Plus... the best looking nylon gear, built to last. Resists moisture, scratches, and tears. Molded for high performance. Belt locking screws. Channel protects weapon front sight. • Black Ballistic Nylon

Grab-resistant, yet draw is simple twistthen-up motion. Mid-ride. Fits belts up to 2-1/4 in. Phoenix Advantage-Plus... best looking nylon gear, built to last. Abrasion and moisture resistant. Molded for high performance. Belt locking screws. Channel protects weapon front sight. Suede lined. • Black Ballistic Nylon

TRIPLE RETENTION DUTY HOLSTER X341

ADJUSTABLE TENSION DUTY HOLSTER K339

Easy, straight-up draw. Mid-ride. Fits belts up to 2-1/4 in. Weatherproof polymer, durable and scuff-resistant. Belt locking screws. Molded channel protects weapon front sight. DuraPro rigid middle layer. Suede lined to protect gun finish. • Black, Black Weave, or Hi-Gloss Porvair

DOUBLE RETENTION DUTY HOLSTER K340

TRIPLE RETENTION DUTY HOLSTER K341

Grab-resistant, yet allows rapid draw with simple twist-then-up motion. Mid-ride. Fits belts up to 2-1/4 in. Weatherproof polymer, durable and scuff-resistant. Belt locking screws. Molded channel protects weapon front sight. DuraPro rigid middle layer. Suede lined to protect gun finish. • Black, Black Weave, or Hi-Gloss Porvair

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

X338 Straight-Up Draw Gives Fast Access To Your Weapon • Tension screw lets you adjust for a firm or easier draw • Hammer strap with thumb snap • Mid-Ride • Sizes for most Auto-Pistols and 4” Revolvers • Fits belts up to 2 1/4” • Right- or left-hand versions

K338 Straight-Up Draw Gives Fast Access To Your Weapon • Tension screw lets you adjust for a firm or easier draw • Hammer strap with thumb snap • Mid-Ride • Sizes for most Auto-Pistols and 4” Revolvers • Fits belts up to 2 1/4” • Right- or left-hand versions Black, Black Weave, or Hi-Gloss

227

DUTY GEAR

Duty Gear by GOULD & GOODRICH

CONCEALMENT HOLSTERS GOLD LINE™ BY GOULD & GOODRICH 817 COMFORT PADDLE HOLSTER More clearance from upper body than regular paddle holster. More comfortable for women or full-bodied men. Flexible wings on paddle for custom fit. Suede lined paddle with non-slip backing. Chestnut Brown or Black

B802 TWO SLOT PANCAKE HOLSTER

B733 THREE SLOT PANCAKE HOLSTER

Deep definition molding and unsurpassed quality. Place on belt up to 1-3/4 in. Gold Line...The finest genuine leather holsters in the world. Black

Premium molded leather. Wear tilted or straight up. Rear sight area cut low for ease of draw. Place on belt 1-3/4 in. Black.

B809 BELT SLIDE HOLSTER WITH THUMB BREAK

707 GRAB-N-GO HOLSTER AND MAG CASE COMBO

709 INSIDE TROUSER HOLSTER

Deep definition and unsurpassed quality. Place on belt up to 1-3/4 in. Gold Line...The finest genuine leather holsters in the world. Black

Inside pants clip-on style. Convenient. Holster and mag case are together in one unit. Quick and easy to put on and take off. Tan

Compact holster provides inside-trouser concealment. Clips to waistband or to belt up to 1-3/4 in. Open top. Brown

SHOULDER HOLSTER 804 OR B804 • Each strap adjusts for a comfortable fit • Cross harness has swivels so straps ride flat for concealment • Holster swivels keep gun riding in correct position • Holster and ammunition carrier have snaps for tie-downs • Magazine case or speedloader case included • Magazine case has tension screws to let you adjust for a firm or easier draw Chestnut Brown or Black

804 SHOULDER HOLSTER

Flat holster front keeps outline of gun from showing. Non-slip outer layer and super-thin satin smooth lining.

Horizontal style. Fully adjustable for comfort, with a back swivel to help straps lay flat for good concealment. Double ammunition carrier. Black non-glare hardware. Gold Line...The finest genuine leather holsters in the world. Chestnut brown.

T727 THE BODY GUARD

B716 BOOTLOCK ANKLE HOLSTER To be worn over a boot. Secures the ankle holster to the boot by lacing the boot laces through the wrap portion of holster.

ANKLE HOLSTER

Waistband holster of longlasting 4 in. wide elastic. Adjustable Velcro closure. For front or back gun carry. Two pouches for magazines or knives. For right or lefthand use. Pad behind gun for extra comfort.

228

701 POCKET HOLSTER

B816 • Soft neoprene wrap • Genuine sheepskin liner • Elastic garter is adjustable and detachable Black

West: 1-866-652-2877

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Duty Gear by GOULD & GOODRICH HOLSTERS TRIPLE TETENTION QUANTUM HOLSTER K380 • Audible, automatic instant retention when you place your weapon in the holster • Hi-Performance thumb break • Fast, smooth draw • “Anti-Blade” Device • Adjustable cant • Mid-Ride • Sizes for most Auto-Pistols • Fits belts up to 2 1/4" • Right- or left-hand versions • Patented Black, Black Weave, or Hi-Gloss

DOUBLE RETENTION QUANTUM HOLSTER X381 • Open top style • Fast, smooth draw • “Anti-Blade” Device • Adjustable cant • Mid-Ride • Sizes for most Auto-Pistols • Fits belts up to 2 1/4” • Right- or left-hand versions • Patented

TRIPLE RETENTION QUANTUM HOLSTER K381 • Audible, automatic instant retention when you place your weapon in the holster • Open top style • Fast, smooth draw • “Anti-Blade” Device • Adjustable cant • Mid-Ride • Sizes for most Auto-Pistols • Fits belts up to 2 1/4" • Right- or left-hand versions • Patented Black, Black Weave, or Hi-Gloss

TRIPLE RETENTION QUANTUM HOLSTER X380 • Hi-Performance thumb break • Fast, smooth draw • “Anti-Blade” Device • Adjustable cant • Mid-Ride • Sizes for most Auto-Pistols • Fits belts up to 2 1/4” • Right- or left-hand versions • Patented

AUTO-RETENTION BELT SLIDE HOLSTER B900 • Injection molded belt loop can be canted forward, straight up, or cross draw • Fits belts up to 1 3/4” Black Internal Locking Device

TACTICAL LIGHT HOLSTER K373 HOLSTER For Duty Weapons With Streamlight TLR-1 or M-3 or Glock Tactical Light • Suede lining • Thermal molded • Adjustable cant • Quick, easy draw • Sleek design • Professional look Black, Black Weave or Nylon

AUTO-RETENTION PADDLE HOLSTER B917 • Flexible paddle wings conform to your body for all-day comfort • Non-slip paddle backing helps keep holster securely in place when you draw • Genuine suede paddle liner against your body for comfort and stability • Easy-on, easy-off convenience Black Internal Locking Device

B900 & B917 Share These Features: • Audible, automatic instant retention when you place your weapon in the holster • Adjust thumb release to your hand size for a smooth draw • The durability of modern polymer with the look of fine leather • Sizes for popular Auto-Pistols • In right- or left-hand versions

TASER HOLSTERS 350 HI-RIDE STYLE 360 SWIVEL STYLE • Wear cross draw or on strong side • 350 Hi-Ride Style holster has adjustable cant • 360 Swivel Style holster can be removed from belt mount with a quick, one-handed motion… requires full 180 degree rotation • Restraining strap is positioned so the user can see the Taser battery indicator light • Specify X26 or M26 Taser • Fits belts up to 2 1/4” • Right- or left-hand versions Black, Black Weave or Nylon

West: 1-866-652-2877

Vancouver: (604) 526-1631

Central: 1-866-652-2877

351 HI-RIDE W/ CARTRIDGE POUCH 361 SWIVEL W/ CARTRIDGE POUCH • Wear cross draw or on strong side • 350 Hi-Ride Style holster has adjustable cant • 360 Swivel Style holster can be removed from belt mount with a quick, one-handed motion… requires full 180 degree rotation • Restraining strap is positioned so the user can see the Taser battery indicator light • Specify X26 or M26 Taser • Fits belts up to 2 1/4” • Right- or left-hand versions Black, Black Weave or Nylon

East: 1-877-993-9968

229

DUTY GEAR

Duty Gear by GOULD & GOODRICH DUTY HOLSTERS

B720A ASTRO DOUBLE RETENTION HOLSTER

DUTY LEATHER™ BY GOULD & GOODRICH

Mid-ride. Grab-Resistant. Dual trigger guard locks plus hammer strap and thumb snap. help resist gun grabs. Natural forward-then-up draw. DuraPro rigid middle. Fully lined. Belt lock screws for a reliable draw. For belts up to 2-1/4 in. Black Leather, Black Weave Leather or Hi-Gloss Porvair

B501 DOUBLE RETENTION HOLSTER Grab-Resistant. Trigger guard hood helps resist attempted gun grabs - yet allows rapid draw with natural forward-then-up motion. Loride. Steel reinforced belt loop can take tough punishment and remain dependable. Place on belt up to 21/4 in. Black Leather, Black Weave Leather or Hi-Gloss Porvair

B721A ASTRO DOUBLE RETENTION HOLSTER Hi-ride. Grab-Resistant. Dual trigger guard locks plus hammer strap and thumb snap. help resist gun grabs. Natural forward-then-up draw. DuraPro rigid middle. Fully lined. Belt lock screws for a reliable draw. For belts up to 2-1/4 in. Black Leather, Black Weave Leather or Hi-Gloss Porvair

CONCEALMENT HOLSTERS GOLD LINE™ BY GOULD & GOODRICH

800 OPEN TOP TWO SLOT HOLSTER

801 YAQUI SLIDE HOLSTER

Deep definition molding and unsurpassed quality. Place on belt up to 13/4 in. Gold Line...The finest genuine leather holsters in the world. Black or Chestnut brown.

Slide this compact holster on your belt. Feel the unsurpassed quality. Fits belt up to 2 in. Has cutout for pants beltloop. Gold Line... The finest genuine leather holsters in the world. Chestnut Brown or Black

803 THREE SLOT PANCAKE HOLSTER

806 SMALL OF BACK HOLSTER

Deep definition molding and unsurpassed quality. Wear tilted or straight up. Place on belt up to 1-3/4 in. Gold Line...The finest genuine leather holsters in the world. Chestnut Brown, Black or Black Lined

Conceal your gun comfortably at your back. Fits belt up to 1-1/2 in. Adjustable tension screw. Gold Line...The finest genuine leather holsters in the world. Chestnut Brown

SHOULDER HOLSTER TIE DOWN Model 864 Snaps to holster or ammunition carrier and attaches to belt. 807 PADDLE HOLSTER Contoured paddle with flexible wings helps keep holster securely in place as you draw. Genuine suede lining. Top quality leather with deep molding, burnishing and polishing. Chestnut Brown or Black

230

West: 1-866-652-2877

810 INSIDE TROUSER HOLSTER Wear this versatile holster concealed inside pants. Gold Line...the finest genuine leather holsters in the world. Natural Suede with Chestnut Brown Trim

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Duty Gear by GOULD & GOODRICH DUTY HOLSTERS BELT SLIDE HOLSTER 891 AND B891 • Back of holster has belt loop and belt slot for stability • Genuine leather • Easy to use, easy to conceal • Sizes for most Auto-Pistols and Revolvers • In right- or left-hand versions • Fits belts up to 1 3/4” Chestnut Brown or Black

OPEN TOP TWO SLOT HOLSTER THREE SLOT PANCAKE HOLSTER 803 OR B803 • Three belt slots to wear canted or straight up • May be worn on strong side or cross draw • Fits belts up to 1 3/4Ó Chestnut Brown or Black

PADDLE HOLSTER & COMFORT PADDLE HOLSTER 807 OR B807 • Flexible paddle wings conform to your body for all-day comfort • Non-slip paddle backing helps keep holster securely in place when you draw • Genuine suede paddle liner against your body for comfort and stability • Easy-on, easy-off hip-hugging convenience Chestnut Brown or Black

West: 1-866-652-2877

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

800 OR B800 • Open top for quick access to your weapon • Fits belts up to 1 3/4” Chestnut Brown or Black

SMALL OF BACK HOLSTER 806 • Top reinforcement band helps holster stay open for easy reholstering • Tension screw lets you adjust for a firm or easier draw • Fits belts up to 1 3/4” Chestnut Brown

231

DUTY GEAR

Duty Gear by GOULD & GOODRICH

OC HOLDERS MK VI AEROSOL HOLDER MODEL B149

OPEN TOP AEROSOL HOLDER MODEL B549

AEROSOL CASE MODEL B681-2 & B681-3

Place on belt up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel snaps. Fits: MKVI

Place on belt up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair. Fits: MK IV, MK XII, Punch II-M4, Body Guard B-10-5 4oz.

Fits belt up to 2-1/4 in. Handsome molded style. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel snaps. B681-2 fits: Punch II-M3 B681-3 fits: MK III, MK XI

AEROSOL CASE, MK IV MODEL B681-4

AEROSOL CASE, MK III, HIDDEN SNAP MODEL B682-3

AEROSOL CASE, MK IV, HIDDEN SNAP MODEL B682-4

Fits belt up to 2-1/4 in. Handsome molded style. Black, Basketweave, or Hi-gloss Porvair. Fits: MK III, MK XI

Fits belt up to 2-1/4 in. Handsome molded style. Black, Basketweave, or Hi-gloss Porvair. Fits: MK IV, MK XII, Punch II-M4, Body Guard B-10-5 4oz.

MK VI AEROSOL HOLDER MODEL B2058

AEROSOL CASE, MK III MODEL X681-3

AEROSOL CASE, MK IV MODEL X681-4

Velcro closure. Place on belt up to 2-1/4 in. Phoenix Nylon … the most durable nylon anywhere. • Black DuraWeb Nylon • Fits MK VI

Fits belt up to 2-1/4 in. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon • Fits MK III, MK XI

MK VI AEROSOL HOLDER MODEL K149

AEROSOL CASE, MK III MODEL K681-3

AEROSOL CASE, MK IV MODEL K681-4

Place on belt up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Hardware • Fits MK VI

Fits belt up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Hardware • Fits Mk III, MK XI

Fits belt up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Hardware • Fits MK IV, MK XII, Punch II-M4, and Body Guard B-10-5 4 oz.

Fits belt up to 2-1/4 in. Handsome molded style. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel snaps. Fits: MK IV, MK XII, Punch II-M4, Body Guard B-10-5 4oz.

GLOVE HOLDERS

232

TWO POCKET GLOVE CASE MODEL X555

TWO POCKET GLOVE CASE MODEL B555

Patented, slim design holds two pair surgical gloves in separate pockets. Velcro closure. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. • Black Ballistic Nylon

Patented, slim design holds two pair surgical gloves in separate pockets. Velcro closure. Black, Basketweave, or Hi-gloss Porvair. Also: K555 • Black or Black Weave • Velcro Closure

West: 1-866-652-2877

Vancouver: (604) 526-1631

Central: 1-866-652-2877

PAGER / GLOVE CASE MODEL X588 Holds most pagers or two pair surgical gloves. • Black Ballistic Nylon

SINGLE GLOVE CASE MODEL B578 Holds three pair surgical gloves. Compact style takes little room on belt. Hidden snap. Black, Basketweave, or Hi-gloss Porvair.

East: 1-877-993-9968

DUTY GEAR

Duty Gear by GOULD & GOODRICH HANDCUFF HOLDERS MODEL B140 & B141

MODEL B580

MODEL B583

Hidden snap closure. Holds most chain handcuffs. Black, Basketweave, or Hi-gloss Porvair.

Holds most chain or hinged handcuffs. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel snaps.

Hidden snap closure. Holds most chain or hinged handcuffs. Black, Basketweave, or Hi-gloss Porvair.

MODEL B596 DOUBLE HANDCUFF CASE

MODEL B597 DOUBLE CASE

MODEL B670

Holds two pair chain or hinged handcuffs. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Snaps.

Hidden snap closure. Holds two pair chain or hinged handcuffs. Black, Basketweave, or Hi-gloss Porvair.

MODEL B70 & B71

MODEL B83

MODEL B85

Holds most chain handcuffs. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel snaps.

1-1/4 in. wide strap holds most handcuffs. Black, Basketweave, or Hi-gloss Porvair.

Separate pocket for each cuff. Fits most handcuffs. Black, Basketweave, or Hi-gloss Porvair.

B140 for chain cuffs. B141 for hinged cuffs.

B70 for chain cuffs.

Holds S&W hinged and chain Model 1 handcuffs. Black, Basketweave, or Hi-gloss Porvair.

B71 for hinged cuffs.

CHAIN HANDCUFF CASE MODEL K70

HINGED HANDCUFF CASE MODEL K71

Holds most chain handcuffs. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Hardware

Holds most hinged handcuffs. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Hardware

MODEL 820 & 840

MODEL B533 MAGAZINE CASE/CUFF HOLDER Saves space on belt. Holds most chain or hinged cuffs plus magazine. Place on belt up to 2-1/4 in. Right or left hand option, Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Snaps. MODEL 840 & 841 CUFF AND MAG CASE

Moulded Leather. Black or Chestnut Brown.

Holds most chain and hinged handcuffs. Tension screw to adjust draw. Gold Line, the finest deeply molded leather anywhere. Right or left hand option, Black or Chestnut Brown.

840 for case with Belt loop

841 for case with belt loop.

West: 1-866-652-2877

DOUBLE HANDCUFF CASE MODEL X596

HANDCUFF CASE MODEL X670

Holds two pair chain or hinged handcuffs. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon

Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. Snap closure. Fits belt up to 2 1/4 in. • Black Ballistic Nylon

CHAIN HANDCUFF CASE MODEL X70

HINGED HANDCUFF CASE MODEL X71

Holds most chain handcuffs. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon

Holds most hinged handcuffs. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

K86 OPEN TOP HANDCUFF CASE • Holds most chain or hinged cuffs • Nickel or brass snap

233

DUTY GEAR

Duty Gear by GOULD & GOODRICH AMMUNITION HOLDERS DOUBLE MAGAZINE CASE MODEL X627

SINGLE MAGAZINE CASE MODEL X628

For vertical or horizontal carry. Non-glare black snap closure. Fits belts up to 2-1/4 in. Phoenix AdvantagePlus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon

For vertical carry. Non-glare black snap closure. Fits belt up to 2-1/4 in. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon

DOUBLE MAGAZINE CASE MODEL X647

DOUBLE MAGAZINE POUCH MODEL X617

Tension screw lets you adjust for a firm or easier draw. For vertical or horizontal carry. Non-glare black snap closure. Fits belts up to 2-1/4 in. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon

Open top for vertical carry. Tension screw lets you adjust for firm or easier draw. Fits belts up to 2-1/4 in. Phoenix Advantage-Plus...molded and built to last. Abrasion and moisture resistant. • Black only

DOUBLE MAGAZINE CASE MODEL K647

DOUBLE MAGAZINE POUCH MODEL K617

Tension screw lets you adjust for a firm or easier draw. For vertical or horizontal carry. Snap closure. Fits belts up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave

Open top for vertical carry. Lets you adjust for firm or easier draw. Fits belts up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave

SINGLE MAGAZINE CASE MODEL K628

BUTTSTOCK SLEEVE DOUBLE MAGAZINE CASE MODEL B2040-3

For vertical carry. Snap closure. Fits belt up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave

Padded to form cheek rest. Reinforced swivel stud hole allows use with most sling swivels. Velcro secures sleeve to buttstock. • Black Nylon

DOUBLE CARTRIDGE POUCH MODEL X327

DOUBLE CARTRIDGE POUCH MODEL K327

STOCK SHELL HOLDER MODEL B553

Phoenix Advantage-Plus...molded and built to last. Abrasion and moisture resistant. Product options • Black

Phoenix Advantage-Plus...molded and built to last. Abrasion and moisture resistant. • Black, Black Weave, or HiGloss Porvair

Shotgun butt stock holder of sturdy nylon and elastic. • Black Nylon

SPEEDLOADER HOLDERS

234

SPEEDLOADER CASE MODEL X162

SPEEDLOADER CASE MODEL K162

Loaders stay separate, in position. Padded for quiet carry. Fits belts up to 2-1/4 in. Phoenix AdvantagePlus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. • Black Ballistic Nylon

Loaders stay separate, in position. Foam cushion in bottom for quiet carry. Fits belts up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave

West: 1-866-652-2877

Vancouver: (604) 526-1631

SPEEDLOADER CASE MODEL B162 Loaders stay separate, in position. Foam cushion in bottom for quiet carry. Fits belts up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Snaps

Central: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Duty Gear by GOULD & GOODRICH AMMUNITION HOLDERS K-FORCE K327-M26 PHOENIX ADVANTAGE-PLUS NYLON X327-M26 SWIVEL BELT LOOP (Not pictured) K353

MODEL B637

MODEL B628

Holds four magazines total. For vertical or horizontal carry. Fits belts up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Snaps.

For vertical carry. Snap closure. Fits belt up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Snaps

MODEL B627

MODEL B533

MODEL B629

For vertical or horizontal carry. Snap closure. Fits belts up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Snaps

Saves space on belt. Holds most chain or hinged cuffs plus magazine. Place on belt up to 2-1/4 in. Right or left hand option, Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Snaps.

Hidden snap closure. For vertical or horizontal carry. Fits belts up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair.

GOLD LINE™ BY GOULD & GOODRICH SINGLE MAG CASE MODEL 830 Compact magazine pouch has a tension screw to adjust to your preference. Easy-on, easy-off paddle. The Gold Line offers the best quality leather concealment products. See the deep molding and polishing.

SINGLE MAG CASE WITH BELT LOOP MODEL 850 Tension screw to adjust draw.

CUFF CASE/MAG CASE COMBO MODEL 821

CUFF AND MAG CASE WITH BELT LOOPS MODEL 841

Combination handcuff case and magazine pouch features easy-on, easy-off paddle. Adjust mag pouch tension screw to your preference. Top quality leather with deep molding and polishing. Right or left hand option, Black or Chestnut Brown.

Holds most chain and hinged handcuffs. Tension screw to adjust draw. Gold Line, the finest deeply molded leather anywhere. Right or left hand option, Black or Chestnut Brown.

DOUBLE MAGAZINE CASE MODEL 831

DOUBLE MAG CASE WITH BELT LOOPS MODEL 851

This compact magazine case has an easy-on, easy-off paddle. The Gold Line offers the best quality leather concealment products. See the deep molding and polishing.

Tension screw to adjust draw. Gold Line, the finest deeply molded leather anywhere.

FLASHLIGHT & MAGAZINE CASE COMBO 860 AND B860 • Two styles...one case. Can be worn as paddle style or belt loop style. Simply remove paddle to reveal belt loop. • Tension screw lets you adjust for a firmer or easier draw • Holds Stinger Scorpion flashlight Chestnut Brown or Black

West: 1-866-652-2877

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

235

DUTY GEAR

Duty Gear by GOULD & GOODRICH RADIO, MICROPHONE & PAGER HOLDERS RADIO STRAP Adjustable strap, Velcro closure and locking tab. Place on belt up to 2-1/4 in. • Black X600 - Phoenix Nylon K600 - K Force Nylon B600

PAGER HOLDER MODEL B614

CELL PHONE HOLDER MODEL K639

Slim holder takes very little room on belt. Place on belt up to 2-1/4 in. Velcro closure. Black only.

Weatherproof polymer laminate is durable and scuff-resistant.

RADIO SWIVEL BELT LOOP MODEL B653 For radios or radio cases with Motorola standard male attachment. Fits belt up to 2-1/4 in. Black leather only.

EPAULET MICROPHONE HOLDER MODEL B616

RADIO SWIVEL BELT LOOP MODEL B2074 Place on belt up to 2-1/4 in. B2074 - Phoenix Nylon K653 - K Force Nylon

Also available: B20297 - Phoenix Nylon K616 - K force Nylon

Attach holder to epaulet. Attach microphone to holder. Offers snap, Velcro and strong polymer loop to hold popular microphones. Black only.

X654 NEW RADIO CASE • Velcro closure adjusts to fit most popular radios • “L” shape base made of heavy-duty steel for extra durability

UNIVERSAL RADIO CASE MODEL X651-1

UNIVERSAL RADIO CASE MODEL K651-1

UNIVERSAL RADIO CASE MODEL B651-1

Fits belts up to 2-1/4 in. Phoenix AdvantagePlus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon

Fits belts up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave

Fits belts up to 2-1/4 in. Genuine leather. Black, Basketweave, or Hi-gloss Porvair.

UNIVERSAL SWIVEL RADIO CASE MODEL K652-1

UNIVERSAL SWIVEL RADIO CASE MODEL X652-1

UNIVERSAL SWIVEL RADIO CASE MODEL B652-1

Radio case swivels, may be detached from included belt loop. Fits belt up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave

Radio case swivels, may be detached from included belt loop. Fits belts up to 2-1/4 in. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon

Radio case swivels, may be detached from included belt loop. Fits belt up to 2-1/4 in. Genuine leather. Black, Basketweave, or Hi-gloss Porvair.

KEY KEEPERS SILENT KEY HOLDER MODEL K598

KEY STRAP MODEL K122

KEY STRAP MODEL X122

Adjustable Velcro closure. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Velcro Closure

Easy to snap on, snap off of belt. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Snaps

Easy to snap on, snap off of belt. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. • Black DuraWeb Nylon

SILENT KEY HOLDER MODEL X598 Adjustable Velcro closure. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. • Black Ballistic Nylon

MODEL B72 MODEL B122 Easy to snap on, snap off of belt. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel snaps.

Flap protects clothing from being rubbed by keys. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Snaps

MODEL B598 SILENT KEY HOLDER Adjustable Velcro closure. Black, Basketweave, or Hi-gloss Porvair.

236

KEY STRAP WITH FLAP MODEL K72

Flap protects clothing from being rubbed by keys. Black, Basketweave, or Hi-gloss Porvair.

West: 1-866-652-2877

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Duty Gear by GOULD & GOODRICH BADGE HOLDERS B407 ROUND CLIP-ON BADGE HOLDER Round leather holder clips to belt.

B408 SHIELD CLIP-ON BADGE HOLDER Shield shape leather holder clips to belt.

B575 ROUND CLIP-ON BADGE HOLDER Round holder includes snap for easy badge insertion.

B567 UNDERCOVER BADGE HOLDER Includes chain to wear around neck.

B576 SHIELD CLIP-ON BADGE HOLDER Oval holder includes snap for easy badge insertion.

BELT KEEPERS VELCRO KEEPER MODEL B2071

HIDDEN CUFF KEY KEEPER MODEL B2096

DOUBLE SNAP BELT KEEPER MODEL B2099

Fits belt up to 2-1/4 in. Holds duty belt and pants belt together. • Black DuraWeb Nylon

Includes hidden cuff key. Fits belt up to 2-1/4 in. • Black DuraWeb Nylon

Holds duty belt and pants belt together. Black no-shine snaps. Fits belt up to 2-1/4 in. • Black DuraWeb

VELCRO BELT KEEPER MODEL K142

HIDDEN CUFF KEY BELT KEEPER MODEL K127

DOUBLE SNAP BELT KEEPER MODEL K76

1 in. wide. Holds duty belt to trouser belt. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Velcro Closure

Includes hidden handcuff key. Double snap style. Holds duty belt to trouser belt. Weatherproof polymer laminate is durable and scuff resistant. • Black Only • Brass or Nickel Hardware

Keeper holds duty belt to trouser belt. 3/4 in. with double snap. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Hardware

DUTY LEATHER™ BY GOULD & GOODRICH B76 DOUBLE SNAP KEEPER • 3/4" wide with double snap • Fits belts up to 2 1/4" • Nickel, brass or black snaps Black Leather, Black Weave Leather, or Hi-Gloss Porvair

B129 QUAD SNAP KEEPER • 1 3/4" wide with four snaps • Fits belts up to 2 1/4" • Nickel, brass or black snaps Black Leather, Black Weave Leather, or Hi-Gloss Porvair

B127 CUFF KEY KEEPER • Includes hidden cuff key • Fits belts up to 2 1/4" • Nickel, brass or black snaps Black Leather, Black Weave Leather, or Hi-Gloss Porvair

B130 SLOTTED KEEPER • Slotted wide back, narrow front, with double snap • Fits belts up to 2 1/4" • Nickel, brass or black snaps Black Leather, Black Weave Leather, or Hi-Gloss Porvair

B142 VELCRO KEEPER • 1" wide with Velcro closure • Fits belts up to 2 1/4" Black Leather, Black Weave Leather, or Hi-Gloss Porvair

MISCELLANEOUS BELT ACCESSORIES

B99

SHOULDER STRAP

B99D

West: 1-866-652-2877

Model B99

To wear from belt near holster, across opposite shoulder, diagonally across back, returning to the belt behind holster. Use with model 99D or use with belt that has dees sewn in. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Hardware

Vancouver: (604) 526-1631

Central: 1-866-652-2877

East: 1-877-993-9968

B99D SLIDING DEE • Snaps over 2 1/4” belt • Attach B99 shoulder strap • Specify nickel or brass dee Black Leather, Black Weave Leather, or Hi-Gloss

237

DUTY GEAR

Duty Gear by GOULD & GOODRICH BATON & OR FLASHLIGHT HOLDERS MODEL B2056

B2055C OR B2055D • Black ring has cutout for switch • B2055C holds “C” cell flashlight or Streamlight Stinger flashlight • B2055D holds “D” cell flashlight

Black plastic ring. Place on belt up to 2-1/4 in. Phoenix Nylon … the most durable nylon anywhere. • Black DuraWeb Nylon SIZE-Standard Wood Baton, C Cell, Streamlight Stinger

MODEL B525

MODEL B73

Snap-on belt loop. Black ring style. Place on belt up to 2-1/4 in. PR 24, PR 24S. Black, Basketweave, or Higloss Porvair. Brass or Nickel Snaps.

Place on belt up to 2-1/4 in. Has snap-on belt loop. Standard Wood Baton, C Cell Flashlight, Streamlight Stinger Flashlight. Black, Basketweave, or Hi-gloss Porvair. Brass or Nickel Snaps.

PR24 BATON/FLASHLIGHT HOLDER MODEL K525 Snap-on belt loop. Black ring style. Place on belt up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Fits: PR 24, PR 24S • Black Hardware

MODEL B2070 PR24 BATON HOLDER Place on belt up to 2-1/4 in. Phoenix Nylon … the most durable nylon anywhere. • Black DuraWeb Nylon SIZE- PR 24, PR 24S

EXPANDABLE BATON HOLDER Adjustable tension style. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon X570-21 - 16 or 21 in. Foam Handle X570-26 - 26 in. Foam Handle

BATON HOLDERS - EXPANDABLE

MODEL B560-21

MODEL B560-26

EXPANDABLE BATON HOLDER

Place on belt up to 2-1/4 in. Handsome molded style. for expandable 16 or 21 in. Black, Basketweave, or Hi-gloss Porvair.

Place on belt up to 2-1/4 in. Handsome molded style. For expandable 26 in. baton. Black, Basketweave, or Hi-gloss Porvair.

Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon X560-21 - 16 or 21 in. Foam Handle X560-26 - 26 in. Foam Handle

Adjustable tension style. Weatherproof polymer laminate is durable and scuff-resistant. • Black or Black Weave K570-21 - 16 or 21 in. Foam Handle K570-26 - Expandable 26 in. Foam Handle

21 26

FLASHLIGHT HOLDERS

X672-5 NEW FLASHLIGHT CASE • Holds Streamlight Strion

238

X672-6 NEW FLASHLIGHT CASE • Holds Pelican M6

X674-9 NEW FLASHLIGHT CASE • Holds Pelican M9 X675-8 NEW FLASHLIGHT CASE • Holds Pelican M8, M10 or M11

West: 1-866-652-2877

Vancouver: (604) 526-1631

X673-5 NEW FLASHLIGHT HOLDER • Holds Streamlight Strion

Central: 1-866-652-2877

East: 1-877-993-9968

DUTY GEAR

Duty Gear by GOULD & GOODRICH FLASHLIGHT HOLDERS RING FLASHLIGHT HOLDER Black ring has cutout for switch. Place on belt up to 2-1/4 in. Phoenix Nylon … the most durable nylon anywhere. • Black DuraWeb Nylon B2055D Fits C Cell, and Streamlight Stinger B2055D Fits D Cell

DOUBLE RING FLASHLIGHT HOLDER MODEL X615

MINI FLASHLIGHT CASE MODEL X672-1

Place on belt up to 2-1/4 in. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. • Black DuraWeb Nylon • Fits C or D Cell, Standard Wood Baton

Fits belts up to 2-1/4 in. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. • Black Ballistic Nylon • Fits AA Flashlight

FLASHLIGHT CASE MODEL X672-4

FLASHLIGHT CASE MODEL X672-2

RING FLASHLIGHT HOLDER

Fits belts up to 2-1/4 in. Phoenix AdvantagePlus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black Ballistic Nylon • Fits Streamlight Stinger, XT, Poly Stinger

Fits belts up to 2-1/4 in. Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. • Black DuraWeb Nylon • Fits Scorpion, Sure-Fire 6P

DOUBLE RING FLASHLIGHT HOLDER MODEL K615 Place on belt up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Black Snap • Fits C or D Cell, Streamlight Stinger, Standard Wood Baton

MODEL B481 MINI-MAG FLASHLIGHT HOLDER Has snap-on belt loop. Place on belt up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair.

Black ring has cutout for switch. Place on belt up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Black Snap K493C fits C Cell Flashlight, Standard Baton K493D fits D Cell Flashlight

FLASHLIGHT CASE MODEL K672-2 Fits belts up to 2-1/4 in. Weatherproof polymer laminate is durable and scuff resistant. • Black or Black Weave • Brass or Nickel Snaps K672-2 Fits Scorpion, Sure-Fire 6P K672-4 Fits Streamlight Stinger, XT, Poly Stinger

MODEL B493C FLASHLIGHT HOLDER C-CELL

MODEL B615 DOUBLE RING FLASHLIGHT HOLDER

Black ring has cutout for switch. Place on belt up to 2-1/4 in. Black, Basketweave, or Hi-gloss Porvair. • Model B493D for D-Cell Holder

Place on belt up to 2-1/4 in. C or D Cell, Streamlight Stinger, Standard Wood Baton. Black, Basketweave, or Hi-gloss Porvair.

K672-5 FLASHLIGHT CASE • Holds Streamlight Strion • Specify nickel or brass snap

MODEL B641-3 M3 LIGHT HOLDER

K674-9BS FLASHLIGHT CASE • Holds Pelican M9

K672-4 FLASHLIGHT CASE • Holds Streamlight Stinger, XT, or Poly Stinger™ flashlight • Specify nickel, brass or hidden snap

MODEL B672-2

MODEL B88

Fits belts up to 2-1/4 in. Handsome molded style. Brass or Nickel Snaps. Black, Basketweave, or Hi-gloss Porvair. Fits Scorpion, Sure-Fire 6P.

Place on belt up to 2-1/4 in. Brass or Nickel Snaps. Black, Basketweave, or Higloss Porvair. Fits D Cell flashlights.

K672-6BS FLASHLIGHT CASE • Holds Pelican M6

West: 1-866-652-2877

Vancouver: (604) 526-1631

Fits belt up to 2-1/4 in. Snap closure. Black, Basketweave, or Higloss Porvair. Fits the Streamlight M3, M5.

Central: 1-866-652-2877

East: 1-877-993-9968

B672-4 LARGE FLASHLIGHT CASE WITH FLAP • Holds Streamlight Stinger, XT, or Poly Stinger™ flashlight • Specify nickel or brass snap Black Leather, Black Weave Leather or Hi-Gloss

K673-5 FLASHLIGHT HOLDER • Holds Streamlight Strion

239

GLOVES Gloves by DAMASCUS PROTECTIVE GEAR X1 v-force™ with SuperFabric® brand material Cut Resistant palm

X5 v-force™ with SuperFabric® brand material Puncture Resistant finger tips

Our V-FORCE™ Search Glove line is made with an exclusive patented SuperFabric® brand material by HDM Inc.® called Puncture Plus™ (or P+) All current models in the V-FORCE™ line use this enhanced puncture and cut resistant version which has been engineered to out perform any other puncture resistant brand. They deliver the most needle puncture resistance, cut protection, and hand flexibility available. Exceeds NIJ's highest protection levels for puncture/ tear resistance and cut resistance. It surpasses the performance of any competitor model in the market with test results to prove it. Remarkable hand function that must be worn to be compared.

• Spandura® breathable backs • Complete finger and thumb tip coverage for protection in the highest risk areas using U.S. made P+ SuperFabric® brand material • Test results yield needle puncture resistance in the finger tips up to 1.2 lbs. of force • Single layer of protection in the palms provides up to 5.5 lbf of cut protection • Thin silicone pattern applied to key areas on palm-side for superior grip on any hard surfaces. • Extremely flexible for the most comfortable (effective) puncture resistant gloves on the market • Velcro® closure strap with embossed logo • Optimum for general search and duty use, airport screeners, etc. • Washable • Sizes: xsm thru xxlg

• AirMesh™ breathable backs • Complete palm side cut resistant protection using U.S. made SuperFabric brand material • Single layer of protection provides up to 5.5 lbf of cut protection (more than Kevlar®) • Thin silicon application superior grip on hard surfaces • Extremely lightweight and breathable for year-round search use • Velcro® closure strap with embossed logo • Washable • Sizes: xsm to xxlg

DSX75 : hornet™ Elite Tactical OPS Gloves

X3 v-force™ Puncture & Cut Resistant gloves with SuperFabric® brand material and Kevlar®

The DSX75 HORNET™ is the next generation in elite tactical gloves and uses the very latest advanced technology. They have been designed for three primary operational applications:

• Black Kevlar® backs (bonded to Spandura®) for added cut resistance over entire hand • 2 layer U.S. made P+ SuperFabric® brand material on palms and finger tips (front back side of fingers only) • Thin silicone pattern on palm-side for superior grip on any hard surfaces • Velcro® closure strap with embossed logo • Independent test results yield cut protection levels up to 10 lbf and puncture resistance up to 1.5 lbs • Exceeds NIJ's highest level category for cut and puncture/tear performance • Very flexible with superior grip for suspect apprehension & control • Sizes: xsm to xxlg

1) To allow the tactical operator the highest amount of dexterity and tactility to manipulate weapons and tools: 2) Provide various rappel ling capabilities without the use of separate "over-gloves" 3) Solve long-term wear issues which other styles have faced (such as flight gloves), that were not designed for higher levels of punishing field use. • U.S. made SuperFabric® brand material reinforced palms provide abrasion and cut resistance, as well as grip. • Kevlar® material fabric provides flame/flash protection as well as cut resistance on backs of hands • Schoeller® Keprotec® padded knuckles provide abrasion and impact resistance • Premium leather reinforced finger tips for added durability at key wear points • Adjustable nylon Spandex® elastic wrist straps give support in close quarter combat situations while giving a comfortable fit • Made for maximum multiple use operations • Size range: Men's md to xxlg

X4 v-force™ Puncture & Cut Resistant gloves with SuperFabric® brand material and Kevlar® • Same style features as our #X3 model, but with 3 layers (instead of 2) of P+ SuperFabric® brand material around the entire fingers/thumbs and palms for the maximum level of cut and puncture protection • Test results yield cut/abrasion protection levels up to 12 lbf and puncture resistance up to 2.5 lbs. of force • The best in the V-FORCE™ line for the highest threat level searching environments • Sizes: xsm to xxlg

240

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by DAMASCUS multi-use, search MULTI-USE / SEARCH MX10 : Nexstar I™ Lightweight

MX30 : Interceptor X™ – black

• Light, cool and breathable for year-round use • Diverse style useful for multiple applications / tasks • Lightweight nylon/Lycra® blend (Spandura®) • Clarino® synthetic suede palm • Non-slip grip reinforced palms and finger tips • Adjustable wrist closure • Washable • Size range: Men’s xsm to xxlg

MX10R : Nexstar I™ With Reflective Identification • Same features as the MX10, with “POLICE” (MX10RP) or “SHERIFF” (MX10RS) • Day or night identification • Will not wear or deteriorate like silk-screened logo versions

• Medium weight materials used for additional durability • Diverse style useful for multiple applications / tasks • Medium weight nylon/Lycra® blend (Spandura®) backs • Ventilated AirMesh™ at wrists • Reinforced lightly padded design on backs of hands • Full leather palm • Adjustable wrist closure • Also available in Sage green / gray combo : #MX30G and Coyote Tan: #MX30C (with Clarino® synthetic suede palm) • Size range: Men’s xsm to xxlg MX30G : Interceptor X™ – sage green / gray MX30C : Interceptor X™ – coyote tan (NEW) MX40 : AXIM™ Adaptive “Cool” Gloves with patented Smart Fabric Technology (SFT)™ by Outlast®

MX20 : Nexstar II™ Medium Weight • Medium weight materials used for additional durability • Diverse “mechanics” style useful for multiple applications / tasks • Medium weight nylon/Lycra® blend (Spandura®) • Neoprene knuckles for enhanced hand flex • Clarino® synthetic suede palm • Reinforced padding on palms at key wear points • Adjustable wrist closure • Washable • Also available in Desert Tan : MX20T & Coyote Tan : MX20C • Size range: Men’s xsm to xxlg

• AirMesh™ contoured breathable backs for maximum airflow and heat dispersion • U.S. Made SFT™ interior linings balance hand temperature to prevent hands from being either too hot or too cold • Clarino® synthetic suede palm with microperforated holes for air ventilation • Neoprene expandable wrist • Seamless rolled finger tip design for superior tactility during searches • Adaptive all-day / year-round comfort • NASA approved technology • Patent pending • Size range: Men’s xsm to xxlg

MX50 VIPER™ (new) With Pittards® sheepskin palms • Pittards® laser etched Spyder™ print premium Sheepskin leather cut .55 mm thin for maximum sensitivity • Water and oil resistant • AirMesh™ contoured breathable backs and thumbs for maximum airflow • Neoprene expandable wrist and backside panels for flexibility • Seamless rolled leather finger tip design for superior tactility during searches and shooting • Size range: Men’s xsm to xxlg

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

241

GLOVES Gloves by DAMASCUS multi-use, Cut resistant MULTI-USE / cut resistant

cut resistant

MX1000 : DARKSTAR™ (new) With Kevlar® palms & SuperFabric® brand material finger tips

DPG125 : Patrol Guard With KEVLAR® in Black • 100% 9oz. Kevlar® fabric bonded to Clarino® synthetic leather on palms for cut resistance • Non-slip material in hand cradle offers sure grip and weapon control • Back of hands feature 1.5mm neoprene and nylon Spandex®for snug fit • Terry cloth outer thumb can be used for perspiration wipe • Adjustable wrist closure • Washable • Size range: Men’s xsm to xxlg

• 100% 9oz. Kevlar® fabric bonded to Clarino® synthetic leather on palms for cut resistance • P+ SuperFabric® brand material in finger tips for moderate puncture resistance • Reinforced hand cradle at the thumb, offers sure grip and weapon control • Back of hands feature AirMesh, 1.5mm neoprene and nylon Spandex® for snug fit • Neoprene at the wrist with adjustable wrist closure • Washable • Size range: Men’s xsm to xxlg

DNK1 : Enforcer K™ Neoprene With KEVLAR® liners

MX1000UX : DARKSTAR™ (new) With Spectra® UltraMAXX-2™ blend palms & SuperFabric® brand material finger tips

• 100% Kevlar® cut resistant protective liners • Durable breathable neoprene backs • Sure-grip synthetic leather palms for optimum sensitivity • Washable and breathable synthetic outer shell • Adjustable wrist closure • Size range: Men’s xsm to xxlg

• The same as our MX1000, but with Spectra® UltraMAXX-2™ blended knit (instead of Kevlar) bonded to Clarino® synthetic leather on palms for maximum cut resistance MX 5000 : HALO® With UltraMAXX® liners (a proprietary Spectra® blend)

DNS2 : Enforcer S™ Neoprene With US Made 100% Spectra® liners

• U.S. Made UltraMAXX® provides the ultimate in high-performance cut protective liners • UltraMAXX ® liners are made from an advanced proprietary combination of Spectra® and other fibers • Cut protective up to 12 lbf. • Aggressive pre-curved design to maximize hand comfort and fit • Breathable medium weight nylon/Lycra® blend (Spandura®) backs • Injected padded pattern on backs of hands for style and protection • Clarino® synthetic suede palm • Neoprene cuff and adjustable wrist closure • Size range: Men’s xsm to xxlg

DNR3 : Enforcer MAX™ Neoprene With US Made Razornet™ (Spectra® blend) liners *U.S. Made Razornet® high performance cut resistant liners are a proprietary blend of Spectra®, fiberglass, and polyester yarns.

DFK300 : Frisker K™ Leather gloves with KEVLAR® • 100% Kevlar® cut resistant protective liners • Smooth premium quality aniline finished cowhide • Gathered short cuff wrist • Water resistant • Available in any color leather by special order. Minimums may apply. • Size range: Men’s xsm to xxlg

DFS2000 : Frisker S™ Leather gloves with 100% Spectra® • With 100% Spectra® U.S. Made cut resistant protective liners • Smooth premium quality aniline finished cowhide • Extended gathered wrist • Water resistant • Available in any color leather by special order. Minimums may apply. • Size range: Men’s xsm to xxlg

242

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by DAMASCUS cut resistant, blood-borne pathogen, Puncture & cut resistant BLOODBORNE PATHOGENS PROTECTION

cut resistant DFM3500 : Frisker MAX™ Leather with Razornet™ (Spectra® blend) liners • U.S. Made Razornet™ high performance cut resistant liners: (a proprietary blend of Spectra, fiberglass, and polyester yarns) • 10 times more cut resistant than mere 100% Spectra of the same weight • Smooth premium quality aniline finished cowhide • Extended gathered wrist • Water resistant • Available in any color leather by special order. Minimums may apply. • Size range: Men’s xsm to xxlg

About our Bloodborne Pathogen protection… The Vanguard™ gloves have been designed to address the O.S.H.A. Blood borne Pathogens Standard (29CFR 1910.1030) to protect hands from deadly microorganisms such as HIV, TB, Hepatitis, Staph, etc. by means of the highly effective Hipora® liquid/barrier proof liner. These gloves are ideal for use by all law enforcement personnel who come into contact with body fluids on a frequent and/or unexpected basis. DVG800 : Vanguard™ Leather gloves with Hipora® barriers • Hipora® membrane which is both waterproof and breathable and is a guardian from blood and body fluids. • Smooth premium quality aniline finished cowhide • Thin black nylon tricot outer liner bonded to foam • Wrist length elasticized cuff • Meets OSHA Standard for blood borne protection • Size range: Men’s xsm to xxlg

DFS2300 : FRISKER NYPD (new) Leather with Spectra® liners This Damascus® style is the official issue of the N.Y.P.D. • With 100% Spectra® U.S. Made cut resistant protective liners • Hydrofil bonded interior liner for warmth • Smooth premium quality aniline finished cowhide • Extended gathered wrist • Water resistant • Size range: Men’s xsm to xxlg

DVG850 : Vanguard V2™ Leather gloves with KEVLAR® liners & Hipora® barriers • The same as our DV800, but 100% Kevlar® knit liners. NOTE: Other stocked models which feature the 100% Hipora® barriers: DNS860L, DZ-8, DZ-9, DZ-10 and the CRT300

PUNCTURE & CUT RESISTANT The #1 Selling PUNCTURE Resistant Gloves in Public Safety… Our V-FORCE™ Search Glove line is made with an exclusive patented SuperFabric® brand material by HDM Inc.®* called Puncture Plus™ (or P+). All current models in the V-FOR CE™ line use this enhanced puncture and cut resistant version which has been engineered to outperform any other puncture resistant brand. They deliver the most needle puncture resistance, cut protection, and hand flexibility available**. Nothing in the law enforcement market outperforms them for specialized searches. Period. The style X3 and X4 gloves are a must-have for anyone involved in high-threat level searches who require the ultimate protection available. The X5 design offers complete finger tip puncture resistance to anyone needing a lightweight washable glove design. The X1 model has a single layer of in the palm for cut resistance exceeding that of Kevlar®, and with an AirMesh breathable back. It makes a great general purpose search glove When it comes to the importance of having true puncture resistance, you just don’t want to have any thing less than the best. The V-Force™ Series is #1 in Performance and Technology. We encourage you to test and compare for yourself.

X1 V-FORCE® With SuperFabric® brand material Cut Resistant palm • NOW WITH ROLLED FINGER TIP DESIGN for increased fit and trigger control • AirMesh™ breathable backs • Complete palm side cut resistant protection using U.S. Made SuperFabric® brand material. • Single layer of protection in palm patches provides up to 5.5 lbf of cut protection (more than Kevlar®) • Thin silicone application for superior grip on hard surfaces • Extremely lightweight and breathable for yearround search use • Velcro® closure strap with embossed logo • Washable • Sizes: Men’s xsm thru xxlg

*SuperFabric® is a registered trademark of HDM, Inc. and is protected by multiple patents and patentspending. **No gloves are puncture or cut PROOF, and all have their limitations. Always use extreme caution when searching. Comparative test data available.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

243

GLOVES Gloves by DAMASCUS Puncture and cut resistant, unlined shooting, search PUNCTURE & CUT RESISTANT

UNLINED SHOOTING / SEARCH

X5 V-FORCE® With SuperFabric® brand material Puncture Resistant finger tips

DSS170 : Sureflex™ Leather gloves with Velcro® closures • Unique form-fitting shooting gloves • Smooth premium quality aniline finished cowhide • Superior feel and sensitivity for shooting • Adjustable wrist closure • Size range: Men’s xsm to xxlg

• Spandura® breathable backs • Complete finger and thumb tip coverage for protection in the highest risk areas using U.S. Made P+ SuperFabric® brand material • Test results yield hypodermic needle puncture resistance in the finger tips up to 1.2 lbs of force • Single layer of protection in the palms provides up to 5.5 lbf of cut protection • Thin silicone pattern applied to key areas on palm-side for superior grip on hard surfaces • Extremely flexible for the most comfortable (effective) puncture resistant gloves in the market • Velcro® closure strap with embossed logo • Optimum for general search and duty use, airport screeners, etc. • Washable • Sizes: Men’s xsm thru xxlg

D302 : Ultrathin™ Cabretta Unlined leather gloves • Hand table cut luxurious premium cabretta leather • Treated water repellent leather outer shell • Gathered wrist • Unlined • Available in any color leather by special order. Minimum’s may apply. • A Damascus® original design for police since 1967 • Size range: Ladies xsm, sm, md, lg and Men’s sizes 7 to 13

X3 V-FORCE® Puncture & Cut Resistant gloves with SuperFabric® brand material and Kevlar® • NOW WITH ROLLED FINGER TIP DESIGN for increased fit and trigger controlBlack Kevlar® backs (bonded to Spandura®) for added cut resistance over entire hand • 2 layer U.S. Made P+ SuperFabric® brand material on palms and finger tips (front back side of fingers only) • Thin silicone pattern on palm-side for superior grip on hard surfaces • Velcro® closure strap with embossed logo • Independent test results yield cut protection levels up to 10 lbf and hypodermic needle puncture resistance up to 1.5 lbs • Exceeds NIJ’s highest level category for cut and puncture/tear performance • Very flexible with superior grip for suspect apprehension & control • Sizes: Men’s xsm thru xxlg

Also Available: D302D in Deerskin with extended wrist

D20P : Dynathin™ Unlined leather gloves • Smooth premium quality aniline finished cowhide • Gathered wrist • Unlined • Size range: Men’s xsm to xxlg

X4 V-FORCE® Puncture & Cut Resistant gloves with SuperFabric® brand material and Kevlar®

DNS860 : Stealth X™ Unlined Neoprene gloves with grip tips

• NOW WITH ROLLED FINGER TIP DESIGN for increased fit and trigger control • Same style features as our X3 model, but with 3 layers (instead of 2) of P+ SuperFabric® brand material around the entire fingers/thumbs and palms for the maximum level of cut and puncture protection • Test results yield cut/abrasion protection levels up to 12 lbf and hypodermic needle puncture resistance up to 2.5 lbs of force • The best in the V-FORCE™ line for the highest threat level searching environments • Sizes: Men’s xsm thru xxlg

• Synthetic leather palms allow maximum sensitivity and are ideal for searching • All-weather durability even in wet conditions • Non-slip materials on fingertips (not on index trigger finger) • Breathable Neoprene back • Adjustable Velcro® wrist closure • Washable • Size range: Men’s xsm to xxlg Also available: Orange and Lime color versions

DNS860L : Stealth X™ Lined Cold Weather Neoprene gloves with grip tips • The same as the DNS860, with the addition of Thinsulate® and HiPora® waterproof liners

244

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by DAMASCUS unlined shooting, search, extrication, Cold weather, lined COLD WEATHER / LINED

UNLINED SHOOTING / SEARCH DLD40 : Thinsulate® Lined leather dress gloves • Smooth premium quality aniline finished cowhide • 100 gram Thinsulate® insulation and cotton/ acrylic inner lining for added warmth • Popular winter dress gloves with a traditional look • Extended wrist • Size range: Men’s xsm to xxlg

D60LT : Dynathin™ (new) Leather gloves lined with patented Smart Fabric Technology (SFT)™ by Outlast® • Smooth premium quality aniline finished cowhide • Thin black Outlast® interior linings balance hand temperature to prevent hands from being either too hot or too cold • Adaptive all-day / year-round comfort • NASA approved technology • Patent pending • Size range: Men’s xsm to xxlg

extrication

DZ-8 : Tempest™ (new) Advanced All-weather gloves with GripSkin™ Technology • A lighter variation of our popular DZ-9 • Performance articulated pre-curved design to maximize hand comfort and fit • Palms made with unique GripSkin™ Technology providing extreme grip in wet or dry weather • Water and Wind resistant Taslan® Nylon stretch panels and neoprene on backs of hands • Thinsulate® lined • Waterproof HiPora® lined • Neoprene at wrist • Wet weather friendly • Excellent cold-weather shooting gloves • Adjustable Velcro® wrist closure • Size range: Men’s xsm to xxlg DZ-9 : SubZERO™ The “ULTIMATE cold weather gloves” • A Damascus® original design concept featuring a unique multi-layer system : outers shell + breathable waterproof liner + insulating fleece layer + 2nd waterproof barrier + absorbent fleece layer • Guaranteed to keep your hands warm from any temperature to -40° below • Performance articulated pre-curved design to maximize hand comfort and fit • Full leather palm • Nylon Lycra® stretch panels on backs of hands • Neoprene at wrist • Adjustable Velcro® wrist closure • Patent pending • Size range: Men’s xsm to xxlg DZ10 : ARTIX™ winter (new) Cut Resistant w/ Kevlar®, Hydrofil & Thinsulate®

D911 : PRO-X™ Heavy-duty Extrication gloves / yellow • Reinforced index fingers and thumbs • Extreme abrasion and puncture resistant dynamic material throughout knuckle and palm areas • DuPont Kevlar® yarn for maximum durability and punishment • High visibility yellow fabric backs • Reflective thread and padded knuckles • Fortified thumbs • Washable synthetic leather palms and fingers • Anatomically designed palm pads • Size range: Men’s xsm to xxlg

• • • • • • • • •

The first winter cut resistant glove of its kind! Kevlar® lined palms C100 Thinsulate® linings for warmth Ribbed neoprene backs for flex with Spandura trim at wrist and thumbs Clarino® synthetic suede palm Reinforced crotch area for grip Adjustable Velcro® wrist closure Washable Size range: Men’s xsm to xxlg

D911B : PRO-X™ Heavy-duty Extrication gloves / black

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

245

GLOVES Gloves by DAMASCUS transit, bike, mc, traffic, high visibility TRAFFIC / HIGH VISIBILITY

TRANSIT / BIKE / MC D22 : Leather Driving Gloves : full finger

DNSLT : UltraVIZ™ Unlined High Visibility Lime Neoprene gloves

• Smooth premium quality aniline finished cowhide • Open knuckles and ventilation holes • Adjustable strap with embossed logo • Size range: Men’s xsm to xxlg

• Fluorescent Lime/yellow breathable Neoprene backs • Grey Clarino® synthetic leather palms • All-weather durability including wet conditions • Adjustable Velcro® wrist closure • Washable • Size range: Men’s xsm to xxlg

D22S : Leather Driving Gloves : 1/2 finger

DNSOT : UltraVIZ™ Unlined High Visibility Orange Neoprene gloves Also Available See also our MX10-R with reflective “POLICE” (MX10RP) or “SHERIFF” (MX10-RS)

DC290 : Bike Patrol Gloves : 1/2 finger DNG66 : "24/7™" Reflective gloves : 1/2 finger

• Lycra® backs • Clarino® synthetic leather palms • Foam padding in palms reduces shock / vibration • Terry cloth thumbs • Washable • Size range: Men’s xsm to xxlg

• Black stretch Lycra® fabric shell can be worn as a stand-alone glove or over other gloves • Palm-side features red reflective Reflexite® triangle • Back-side features lime/yellow reflective directional markers for traffic direction • Visible from 200-600 feet (60-183 meters) • Washable • Size range: sm/md or lg/xlg (two sizes only)

DM660 : Premium Motorcycle Gauntlet • Premium cowhide leather and Cordura® for maximum durability • Contoured design at knuckles for hand flexibility • Hipora® Windproof/waterproof/breathable inserts • Reinforced palms • Raised padded knuckles for additional protection from debris • Adjustable closures • C100 Thinsulate® lining with Hollofil® and soft brushed lining for extra warmth • Size range: Men’s xsm to xxlg

DTL : Lime knit traffic gloves With reflective strips • Lime/yellow fluorescent poly stretch knit with reflective strips around entire gloves • Extended elasticized cuff • Washable • Sold in pairs • U.S. Made • One size fits all Also Available without reflective strips.

DTO : Orange knit traffic gloves With reflective strips

246

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by DAMASCUS postal, RIOT CONTROL, CELL EXTRACTION postal DNS440 : Postal X™ Unlined neoprene gloves – 1/2 finger

D555 : Mailmaster™ Suede leather with Trax-tex™ finger tips

• Like it’s law enforcement cousin, the Postal X is ideal for all weather conditions • Synthetic leather palms allow maximum sensitivity even in wet environments • ½ finger design for warmer weather and easier sorting / finger dexterity • Velcro® closure for secure fit • Breathable Neoprene backs • Size range: Men’s xsm to xxlg

• Thinsulate® insulation for warmth • “Gunn-cut” pattern provides a dress glove level fit • Size range: Ladies xsm to lg and Men’s sizes 7 to 13

DNS862 : Postal X™ Neoprene gloves with Trax-tex™ finger tips – full finger

D550 : Workmaster™ Suede leather

• Like it’s law enforcement cousin, the Postal X is ideal for all weather conditions • Synthetic leather palms allow maximum sensitivity even in wet environments • Non-slip materials on fingertips for letter sorting • Velcro® closure for secure fit • Breathable Neoprene backs • Size range: Men’s xsm to xxlg

• Same features as our D555, but without the Trax-Tex™ finger tips

DFG100 : Thermal fleece Postal Mitt • C-100 Thinsulate® insulation for warmth • Flip-back finger cover for when full finger tip use is required • Versatile design • Non-slip palms • Secure elastic cuff keeps the wind out • Washable • Size range: Men’s xsm to xxlg

DDP55 Acrylic Knit (NEW) With PVC grip dots • • • • •

Black acrylic string knit gloves PVC superior grip dots Washable ½ finger version available by special order. Size range: Men’s sm to xxlg

RIOT CONTROL / CELL EXTRACTION DMZ33 : NITRO™ (new) Kevlar® Tactical Gloves with Carbon Tek™ Knuckles

CRT100 : Vector 1™ Riot Control Gloves with Carbon-Tek™ fiber knuckles • Molded black hard shell Carbon-Tek™ fiber knuckles and panels to deflect blows and debris • Foam injected padded knuckles and wrist • Leather shell with reinforced palms • Double reinforced stitching and elasticized wrist • Velcro® closure • Inner lining of bonded breathable tricot • Size range: Men’s md to xxlg

• Kevlar® on back of hands is flame/flash retardant as well as cut protective. • Smooth premium quality aniline finished cowhide palms • Black CarbonTek™ knuckles provides protection • Wrist length with Velcro® closure for a secure fit • Rolled finger tip design for excellent trigger sensitivity and fit. • Size range: Men’s sm to xxlg

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

247

GLOVES Gloves by DAMASCUS RIOT CONTROL, CELL EXTRACTION, TACTICAL OPS, RAPPELLING RIOT CONTROL / CELL EXTRACTION CRT300 : Vector 3™ The UTLIMATE Riot Gauntlet with concealed Carbon-Tek™ fiber knuckles The CRT300 has been specifically designed to protect the operator against various bodily injuries and bloodborne pathogens during close contact with potentially violent inmates. The new added protection against harmful body fluids as well as cut resistance makes the CRT300 the ultimate in it’s category. It is used for Corrections Special Operations areas: Dynamic Cell Extractions, Close Quarter Riot Control Operations, High-Risk Inmate Movements.

TACTICAL OPS / RAPPELLING

• Molded black hard shell Carbon-Tek™ fiber knuckles and panels to deflect blows and debris, concealed with leather • Foam injected padded knuckles • Durable leather shell • Bloodborne pathogens protective / fluid-proof inner glove linings • Palms have a single layer of U.S. Made SuperFabric® brand material for cut resistance and coated with black silicone • dots for extreme grip on inmates, equipment, and weaponry. • Double reinforced stitching • Gauntlets feature hard shell plastic trauma plates with additional closed-cell foam padding • Ergo form on gauntlets compliments upper body mobility • Velcro® closure • Inner lining of bonded breathable tricot • Size range: Men’s md to xxlg

ELITE TACTICAL OPS / RAPPELLING

DPT44 : RINCON™ (NEW) Lightweight rappell gloves

D3010 : Responder™ 1/2 finger (NEW) With d3o™ technology padding

• Lightweight belay/rappel gloves combine the durability of a work glove with the precise fit and dexterity of a shooting glove • Double-layered leather goatskin palms protects the palm and other high-wear areas. • Abrasion resistant, breathable stretch nylon, ensuring comfort and flex • Low-profile neoprene cuff with a Velcro® closure • Reinforced carabineer hole for attaching the gloves to your harness at wrist • Size range: Men’s sm to xxlg

• Tactical operations gloves • Reinforced suede leather palms for light rappelling and grip • Smooth premium quality aniline finished cowhide • Shock-absorbing d3o padded knuckles and backs of hands • 1/2 finger cut off design for preferred trigger and gun control • Velcro® closure for secure fit with embossed logo • Size range: Men’s sm to xxlg

DRE10 : Responder™ 1/2 finger Leather gloves with reinforced palms

D3025 : Responder™ full finger (NEW) With d3o™ technology padding

• Tactical operations gloves • Reinforced suede leather palms for light rappelling and grip • Smooth premium quality aniline finished cowhide • Shock-absorbing foam padded knuckles and backs of hands • 1/2 finger cut off design for preferred trigger and gun control • Velcro® closure for secure fit with embossed logo • Size range: Men’s sm to xxlg

• The same design features as our D3010, but as a full-finger style

DRE25 : Responder™ gloves • The same design features as our DRE10, but as a full-finger style

248

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by DAMASCUS ELITE TACTICAL OPS, FLIGHT, TACTICAL OPS, MECHANICS, DUTY elite tactical ops

FLIGHT / TACTICAL OPS DNXF190 : Flight gloves with Nomex®

DSX100 : HORNET X™ (NEW) Elite Tactical OPS Gloves with Pittards® Firebloc Goatskin™

• Traditional military flight glove style made to the standard of U.S. Mil Spec • DuPont Nomex® fabric and thread • Flame and flash protective to 800˚F (427˚C) • Smooth premium quality aniline finished cowhide palms • Traditional military flight glove style made to the standard of U.S. Mil Spec • Size range: Men’s sm to xxlg

The DSX100 Hornet X™ is the next generation in elite tactical gloves and uses the very latest advanced technology. They have been designed for three primary operational applications: 1) To allow the tactical operator the highest amount of dexterity and tactility to manipulate weapons and tools; 2) Provide various rappelling capabilities without the use of a separate “over-glove”; 3) Solve long-term wear issues which other styles have faced (such as flight gloves), that were not designed for higher levels of punishing field use. The DSX-100 design excels by means of its material components, which are among the best available in the world: The knuckles on the backs of the hands are reinforced with Keprotec® by Schoeller® Switzerland. Keprotec® is a blend of Cordura®, Dynafil®, TS70® and Kevlar®. It is a tenacious fabric with superior abrasion resistance, flexibility and is lightweight. It is used most commonly in apparel for extreme sports. DuPont® Kevlar® fabric provides flame / flash protection as well as cut resistance on backs of hands and the entire index finger and remaining finger tips have been reinforced with premium aniline leather. • Pittards® two-layer reinforced Fireboc™ goatskin leather in palms and backs of hands: Leather is Flame retardant, Oil & Water resistant, abrasion resistant, and breathable. • Pittards® laser etched Dragon™ print • The Flame Retardant protection meets the EN407 and EN469 as well as the abrasion resistance in the EN388 European Standards. • Kevlar® material fabric provides flame / flash protection as well as cut resistance on backs of hands • Schoeller® Keprotec® padded knuckles provide abrasion and impact resistance • Premium leather reinforced finger tips for added durability at key wear points • Adjustable and removable Spandex® elastic wrist straps give support in close quarter combat situations while giving a comfortable fit • Made for maximum multiple use operations • Size range: Men’s md to xxlg

Available in black (#DNXF190-B), olive drab/black leather (#DNXF190-OD), sage green/grey leather (#DNXF190-G) and tan (#DNXF190-T)

DKS500 : Short cuff tactical gloves with Kevlar® • Similar in design to the traditional flight glove, but with a shorter length in the cuff • DuPont Kevlar® fabric and thread • Flame and flash protective to 800˚F (427˚C) • Kevlar® on backs of hands also provides cut protection • Smooth premium quality aniline finished cowhide palms • Black. Other colors available by special order. • Size range: Men’s sm to xxlg

MECHANICS / DUTY

DSO125B : TRITON™ (NEW) With Pittards® Firebloc™ Goatskin leather The industry’s first completely flame retardant tactical gloves. • Pittards® two-layer reinforced Fireboc™ goatskin leather in palms and backs of hands: Leather is Flame retardant, Oil & Water resistant, abrasion resistant, and breathable. • Pittards® laser etched Dragon™ print • The Flame Retardant protection meets the EN407 and EN469 as well as the abrasion resistance in the EN388 European Standards. • Kevlar® fabric shell provides cut resistance and flash protection to 800˚F (427˚C). • Elasticized wrist keeps these gloves snug and with little slack • Extended cuff • Non-skid material in hand cradle provides exceptional grip when handling weapons • Schoeller® Keprotec® padded knuckles provide abrasion and impact resistance • Size range: Men’s sm to xxlg

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

MX20 : Nexstar II™ Medium Weight • Medium weight materials used for additional durability • Diverse “mechanics” style useful for multiple applications / tasks • Medium weight nylon/Lycra® blend (Spandura®) • Neoprene knuckles for enhanced hand flex • Clarino® synthetic suede palm • Reinforced padding on palms at key wear points • Adjustable wrist closure • Washable • Size range: Men’s xsm to xxlg Also available in Desert Tan : MX20T & Coyote Tan : MX20C

249

GLOVES

Gloves by MDC CUT RESISTANT GLOVES MDC 5000 "THE PROTECTOR" The MDC 5000 features a 100% Spectra® knit liner for substantial cut-resistance from razors, knives, and other ® sharp objects The Spectra yarn is knitted into a glove liner, which is then sewn into a durable goatskin shell. Please note: this glove is cut-resistant, and not cut-proof. MDC 5000, THE PROTECTOR, features: Extended length wrist elasticized cuff 100% Spectra® knit liner ® Twice the cut resistance of Kevlar of the same weight. Laboratory test results available MDC gloves are guaranteed against any defects in materials or workmanship for 90 days from purchase

MDC 7000 "THE PROTECTOR MAX" WITH "POWERSHIELD X3TM" LINER The MDC 7000 PROTECTOR MAX features a Spectra blend knit liner for substantial cut-resistance from razors, knives, and other sharp objects. The X3 liner is made of a superfiber from Allied Signal comprised of Spectra, fiberglass, and polyester blend. The liner is sewn into a durable goatskin shell. Please note: this glove is cut-resistant, and not cut-proof. MDC 7000, THE PROTECTOR, features: Wrist length elasticized cuff Powershield X3TM liner 10 times the cut resistance of 100% SPECTRA® of the same weight MDC gloves are guaranteed against any defects in materials or workmanship for 90 days from purchase

FACT Surveys of law enforcement agencies indicate that at least 30% of the prints lifted from crime scenes – from knife hilts, gun gripes, steering wheels, and window panes – are of palms, not fingers. That is why in April, the New York Police Department began having prisoners place their whole hands, not just their fingertips, on the glass platens of the scanners when their prints are taken.

Shaila Dewan The New York Times from an article in the Times Colonist November 30, 2003

250

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by hatch traffic duty, disturbance control traffic duty

DISTURBANCE CONTROL Daynite™ reflective glove

Defender™ mP

An essential piece of safety equipment for conducting vehicle stops or directing traffic to ensure that passing motorists see you. Hold palm outward to reveal the red STOP signal, and use the yellowgreen markers on outside of hand to direct traffic onward. Constructed of black Lycra® with patches of Reflexite®, a retro reflective microprism material with cube-corner prisms, three times more efficient at reflecting light than glass bead systems. Allows the wearer to be seen by motorists at the critical viewing distances of 100 to 600 feet. The stretchable Lycra® fabric allows DayNite™ gloves to be worn alone or over virtually any other gloves

The new Defender MP provides maximum hand protection for the toughest disturbance control situations. Plus, it features Hatch’s Ergo-Cut™ design to allow for maximum dexterity for searching and weapon control. High density EVA foam padding for knuckle, finger and forearm protection. 100% goatskin leather with water repellant finish. Hatch signature Ergo-Cut™ in palm for superior fit. Elasticized wrist. Hook and loop closure keeps gloves taut. Index fingers are left unpadded for trigger control

dnr100

Mp100

Available in sizes s-xxl

Available in sizes s/m - l/xxl

Defender ii™ with steel shot reflective traffic glove Reflective Traffic Gloves provide high visibility when directing traffic or crowds. Constructed of fluorescent cotton jersey fabric. 3M™ reflective strips around the circumference shine back at oncoming traffic allowing others to read your hand signals clearly RTG100 - Orange lRTG200 - Green

Available in sizes s-xx

white cotton Parade glove

Sp100

These gloves are a must for special occasions and formal events in law enforcement and the military. Also used for directing traffic or crowds. Constructed of 100% medium weight cotton. Offered with vent cuff (WG1000) or snap cuff (WG1000S) Available in sizes s-xl

WG1000

The most advanced weighted defense gloves available. Perfect for correctional, riot or disturbance control operations. Spandex backs, Ergo-Cut™ design, double-layered goatskin palms and hook and loop closures offer a comfortable fit and grip. Each finger is foam padded for protection, while four ounces of steel shot in each knuckle area stops aggressors in their tracks. Hook and loop closure helps keep glove taut. Spandex fabric allows for freedom of movement. Each finger is foam padded for protection. Four ounces of steel shot sewn into each knuckle area. Double-layered goatskin palm

WG1000S

Dominator™ Disturbance control gloves with Honeywell Spectra® designed to provide protection for law enforcement and corrections officers during volatile crowd control situations and cell extractions. The entire hand is protected from sharp weapons by a cut-resistant 100% Honeywell Spectra® knit liner. Constructed with durable goatskin leather. Large foam padded gauntlets with trauma plates protect the forearm. Half-inch closed-cell foam pads, divided to allow sufficient hand mobility, cover the back of the hands and fingers. Index fingers are left unpadded for trigger control rG800

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Available in sizes s-xxl

251

GLOVES Gloves by hatch tactical TACTICAL reactor™ Hard Knuckle

reactor™ 3/4 finger

This glove features our unique leather covered hard knuckle design with heavy padding in the palm and around the outer edges of the hand for excellent protection. Perfect for breaking and raking or using a battering ram. Knuckles are covered with .7mm-.8mm aniline goatskin leather to reduce the IR signature of the glove. Knuckles formed from hard polymer for the protection you really need. Additional leather, foam and padding to protect the tops of the knuckles on the fingers. Additional PVC non-slip across the meaty portion of the palm and base of the fingers. Leather covered hard knuckle reduces noise. The design tapers up the outside wrist to protect this sensitive area

Three-quarter finger version with all of the identical features listed above. Allows for maximum control and sensitivity when greater tactility is require

rHk25

LR10

Available in sizes s-xxl

fast rope/swat rescuea Essential equipment for those working in SWAT or rescue operations. Soft, yet extremely durable cowhide leather construction provides a comfortable fit and substantial protection. The palms have two extra layers of leather that wrap around into the cradle area of the hand and thumb to increase grip and to withstand the stresses of rapid rappels. Elasticized wrists

Available in sizes s-xxl

BFR10

Available in sizes s-xxl

reactor™ Hard Knuckle 3/4 finger Same features as the full-finger version above. RHK10

special warfare

Available in sizes s-xxl

Designed with the help of various special operation members, our Special Warfare Gloves are designed to provide maximum performance for underwater tactical operations. The Mustang ‘CoF’ (Coefficient of Friction) oiltack suede palms offer grip far superior to that of standard leather in wet conditions. An additional WRX100 waterresistant treatment helps shed water quickly for further improved wet grip performance. WRX100 treatment also prevents the absorption of moisture, allowing the palms to retain their softness and feel even after prolonged use. A 1.5mm neoprene shell works like a wetsuit to keep hands warm, and the CoolTex™ liner wicks moisture away from the hand for comfort and positive grip even in extreme conditions. Unique ergonomic cut and hook and loop closure provides a custom fit

fast rope over-glove The FROG F10 is designed to be used in combination with the Operator™ CQB™ tactical gloves to create a revolutionary, fast roping system for protection during rapid rappels, with a snug fit that eliminates the need for removal to achieve combat ready status. Durable cowhide leather construction with a Spandex back for cooling and comfortable fit. Two additional layers of leather are double-stitched with KEVLAR® into the critical grip area of the palms, extending into the cradle of the thumb to withstand the stresses of rapid rappels and provide lasting wear. Hook and loop closures allow easy pull-on and removal FROGF10

SWG6

Available in sizes s-xxl

Hatch® mechanic’s Specially designed to protect your hands during the toughest jobs and provide superior grip for using heavy tools. Chamude synthetic leather palm with high-density foam padded reinforcements. Abrasion-resistant heel pads provide protection during torquing motions. Flexible, breathable Spandex back with ergonomically split high-density foam padding. Reinforced finger tips with Toughtek™ grip patches. Double-layered reinforced cradle. Elasticized wrist with hook and loop closure

reactor™ Designed for use in tactical operations, the Reactor™ Glove is designed for rappelling, tactical entry and shooting. Also excellent for disturbance control operations. Thick foam padding on the backs is ergonomically split to improve dexterity. .8-.9 mm thick cowhide leather construction makes them extremely strong and durable. An additional layer of leather in the palms provides added protection during rapid rappels, and unpadded index fingers allow maximum trigger control. Hook and loop wrist closures ensure a snug, comfortable fit LR25

252

Available in sizes s-xxl

HMG10

Available in sizes s-xxl

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by hatch tactical TACTICAL flight glove with nomeX®

SoG-l100/l150/l200: operator™ tactical

These gloves have been modeled to US military specifications in virtually every detail and are part of the essential equipment used for military units and law enforcement agencies around the world. Constructed with heat and flash resistant 100% NOMEX® fabric backs. NOMEX® material will not support flame or combust up to 800°F (427°C). Durable, yet soft premium leather palms. Sewn entirely with NOMEX® thread

Designed by and specifically for SWAT use. Made with kangaroo leather, one of the strongest lightweight leathers available. KEVLAR® construction provides excellent cut resistance, heat and flashprotection. Water-resistant, ultra-thin kangaroo leather palms are sewn with abrasion, cut and heat-resistant nylon thread. Hatch Ergo-Cut™ to prevent bunching; Extreme-Grip™ non-skid material in cradle of hand for confident grip. SOG-L200 contains 85% NOMEX® and 15% KEVLAR® blend. Will not support flame or combust up to 800°F (427°C) Elasticized wrist keeps the Operator taut, while the elasticized gauntlet keeps out foreign objects and prevents snagging. Patented Cut-Ring allows optional removal of the index finger for trigger control, without unraveling the remaining edge

BNG190 - black BNG200 - sage green BNG210 - Desert tan BNG220 - foliage

Available in sizes s-xxl

shooting glove with Kevlar® These gloves were modeled after our flight gloves, but with a 4” shorter cuff. They are very lightweight, comfortable shooting gloves designed for use in SWAT and tactical operations. Cut-resistant KEVLAR® backs will not support flame or combust up to 800°F (427°C). The form fitting design and thin, yet durable leather palms provide excellent tactility, dexterity and grip for high performance shooting. The short, open cuffs allow easy pull-on and removal AKSG500

Available in sizes s-xxl

operator™ shorty tactical This is the short version of the SOG-L100 series with all the identical features, but is a shortened, wrist-length version. Water-resistant kangaroo leather palms are sewn with abrasion, cut and heat-resistant nylon thread. KEVLAR® construction provides excellent cut resistance, heat, and flash protection. Will not support flame or combust up to 800°F (427°C). Elasticized wrist keeps the Operator ‘Shorty’ taut. Patented Cut-Ring allows optional removal of the index finger for trigger control, without unraveling the remaining edge

operator™ tactical Designed by and specifically for military use. Constructed of goatskin leather palms and sewn with abrasion, cut and heat-resistant NOMEX® thread. Goatskin provides superior abrasion and tear resistance over cowhide or sheepskin, yet offers a comparable thickness for comfort and durability. KEVLAR® construction provides cut resistance, heat, and flash protection. SOG-700 contains 85% NOMEX® and 15% KEVLAR® blend . Will not support flame or combust up to 800°F (427°C). Elasticized wrist keeps the Operator taut, while the elasticized gauntlet keeps out foreign objects and prevents snagging. Patented Cut-Ring stitching allows optional removal of the index finger for trigger control, without unraveling the remaining edge

SOG-L50 - Black Available in sizes s-xxl SOG-L75 - sage green

SOG-600 - Black Available in sizes s-xxl SOG-650 - Sage Green SOG-700 - Desert Tan SOG-750 - Foliage SOG-800 - Coyote (New)

operator™ cQb™

operator™ HK

The Operator CQB is designed for Special Operations close quarter combat and can be combined with the FROG F10 Fast Roping Over-Glove (page 27) to create a revolutionary fast roping system. Water-resistant, ultra-thin kangaroo leather palms are sewn with abrasion, cut and heat-resistant nylon thread. KEVLAR® construction provides excellent cut resistance, heat, and flash protection. Will not support flame or combust up to 800°F (427°C). Reversible wrist wrap. Patented Cut-Ring allows optional removal of the index finger for trigger control, without unraveling the remaining edge. SOG-F20 contains an 85% NOMEX® and 15% KEVLAR® blend

The Operator HK features hard knuckle protection and strategically placed high-density foam to provide superior protection from assailants and objects. Wrist length with hook and loop closure for a secure fit. Durable aniline goatskin with a waterresistant leather treatment to keep hands dry. High density foam for full finger protection; exclusive lateral finger protection. SOGHK-400 contains 100% NOMEX®; SOGHK-300 & SOGHK-350 contain 100% KEVLAR®. Fire resistant features with KEVLAR®/NOMEX®. Wicking properties of KEVLAR®/NOMEX® pull moisture away from the hands to keep them cool in hot environments. Patented Cut-Ring allows optional removal of the index finger for trigger control, without unraveling the remaining edge. Reduces IR signature.

SOG-F10 - Black Available in sizes s-xxl SOG-F15 - Sage Green SOG-F20 - Desert Tan

Head Office: 1-866-652-2877

SOG-L100 - Black Available in sizes s-xxl SOG-L150 - Sage Green SOG-L200 - Desert Tan

West: (604) 526-1631

Prairies: 1-866-652-2877

SOG-HK300 - Black Available in sizes s-xxl SOG-HK350 - Foliage SOG-HK400 - Coyote

East: 1-877-993-9968

253

GLOVES Gloves by hatch tactical, protective gear CUT RESISTANT elite Duty w/ Kevlar®

friskmaster™ max with Powershield X3® liner

Cut-resistant protection for duty officers to use while frisking, searching and for weapon control. The KED100 provides cut protection throughout the entire glove. .8mm aniline goatskin leather. 100% KEVLAR® knit lining for excellent cut resistance. Durable stretch woven fabric upper with water resistant membrane. Stretch nylon in fourchettes allow the glove to mold to your hand, eliminating the bulk between fingers, providing a greater range of motion. Terry cloth thumbs for sweat removal KED100

These Friskmaster gloves feature the Powershield X3® Liner comprised of Honeywell Spectra®, fiberglass and polyester providing 10 times the cut resistance of 100% Honeywell Spectra® of the same weight. Cut-resistant. Constructed of premium leather with a water and fade resistant treatment. Wrist length elasticized cuffs FM3500

Available in sizes xs-xxl

Available in sizes s-xxl

street guard™ with X11™ liner This popular frisk and search glove features our exclusive X11™ liner raising the bar in protective cut-resistant duty gloves by protecting your entire hand against injury from sharp objects. Tested to 11 lbf. of cut resistance. Digitized synthetic leather palms with ExtremeGrip™non-slip cradle, offering sure grip and positive weapon control. 1.5mm neoprene and nylon Spandex laminated back allows air circulation for maximum comfort while providing a proper, snug fit. Hook and loop closure keeps gloves firmly in place

resister™ with Kevlar® This glove is a favorite of duty and corrections officers worldwide. Constructed of premium leather with a water and fade-resistant treatment. Wristlength elasticized cuffs. 100% KEVLAR® knit liners for moderate cut resistance RFK300

Available in sizes xs-xxl

SGX11

Available in sizes s-xxl

street guard™ with Kevlar® This Hatch original design offers excellent protection from cuts and sharp objects over the entire hand and features a 9 oz. KEVLAR® interlock liner in the inside of the hands and fingers as an extra safeguard. Digitized synthetic leather palms with Extreme-Grip™ non-slip cradles, offering sure grip and positive weapon control. Neoprene and nylon Spandex laminated back allows air circulation for maximum comfort while providing a proper, snug fit. Hook and loop closure keeps gloves firmly in place SGK100

friskmaster™ supermax™ With the Friskmaster SB8500 you won’t even know you’re wearing a lined glove. Featuring a Dyneema® liner - the best cut resistant liner available – it offers unparalleled cut protection to prevent injuries from knives, razors and other sharp objects. Dyneema offers twice the protection required for the highest class in the EN 388 test standard. Premium leather construction. Leather is impregnated with a water and fade-resistant treatment. Dyneema® liner for the ultimate in cut protection, comfort and dexterity. Elasticized, extended cut

Available in sizes xs-xxl

SB8500

Available in sizes xs-xxl\

friskmaster™ with Honeywell spectra® With the addition of the 100% Honeywell Spectra® knit liner, this design provides twice the cut resistance of KEVLAR® of the same weight. 100% Honeywell Spectra® knit liner protects from sharp objects. Constructed of water resistant premium leather. Short elasticized cuffs FM2000

254

Available in sizes s-xxl

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by hatch protective gear, postal CUT RESISTANT

postal

armortip™ Puncture Protective glove super Dot™ The postal gloves provide warmth and a superb grip in all weather conditions. PVC dots cover palm area for great grip. Tight, elasticized cuff keeps out wind RDP55

ArmorTip™ Puncture resistant tips Puncture resistant side panels on small and index fingers

Half-finger super Dot™ Half-finger version offers greater dexterity and accurate feel. SDP30

These puncture and cut-resistant gloves have been tested for puncture resistance under the NIJ test protocol to the highest levels of protection. Our exclusive ArmorTip design provides cut and puncture protection where 80-90% of needle stick injuries occur, while keeping the much needed flexibility for maximum performance. This design offers optimum protection from potentially deadly needle sticks and cuts. Hatch X11 liner tested to 11 lbf. under NIJ test protocol. Palm is covered in Chamude synthetic leather. ArmorTip system protects the leading edges of the finger tips and sides of the index and small fingers - NIJ tested to 21 lbf. Neoprene and Spandex laminated back with hook and loop closure flexes and breathes to provide maximum comfort and proper fit PPG1

Available in sizes s/m • l/xl

Postman™ with neoprene

Available in sizes s-xxl

street guard™ mK4

Available in sizes s-xxl

Exceptionally comfortable and flexible gloves for all-weather postal delivery. Neoprene backings trap heat and block out moisture, protecting your hands from the elements like a wetsuit. Synthetic leather palms and non-slip rubber patches on the tip of the index fingers provide excellent grip and accurate feel, even in wet conditions. Hook and loop closures keep them comfortably and firmly in place

Extra protection for searches on first two fingers Goatskin leather palm Dyneema® Liner Stretch woven fabric back Sure-Grip™ on thumbs

NS430P

Available in sizes xs-xxl

With a Dyneema® liner, the new Street Guard MK4 provides the ultimate combination of superior cut protection and great dexterity for a frisk and search glove. Featuring super-durable goatskin leather, this glove has a great combination of duty glove dexterity with maximum cut protection. Reinforced on first two fingers for extra protection during searches. Silicone molded plastic for knuckle and lateral finger protection. Goatskin leather palm. Stretch woven fabric back. Dyneema® liner for superior cut protection. Extreme-Grip™ non-skid material for enhanced weapon control. Absorbent terry cloth thumbs for sweat removal MK4100

Available in sizes s-xxl

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

255

GLOVES Gloves by hatch Cold weather Cold Duty

elite winter specialist®

winter specialist® all-weather neoprene shooting/Duty

With all the features of our best-selling Specialist glove, the Elite Winter Specialist offers critical hand protection for officers working in cold weather climates. 100% nylon back with goatskin palm for durability and dexterity. Thermolite™ lining for warmth; wicking action pulls perspiration from hand to prevent the loss of body heat. Spandex wrist cuff for a snug fit keeps out cold weather. Adjustable hook and loop closure on outer shell helps to keep out debris. Extreme-Grip™ non-skid material for enhanced weapon control EWS530

A lined, winter version of the NS430 Specialist® designed specifically for cold, wet, winter weather. . Palms made of Synsi-feel™ synthetic leather provide excellent grip and accurate feel. ExtremeGrip™ sewn onto the palms and fingertips (except the index finger) to facilitate trigger control. Dual inner linings of Thinsulate® insulation and breathable, waterproof. Hipora® work together to keep hands warm and dry. The fluid-proof properties of the Hipora® liners also protect the wearer against contact with deadly blood borne pathogens. Hook and loop closure provides a snug fit

Available in sizes s-xxl

NS430L

leather Dress glove with thinsulate™ insulation

winter Patrol The Winter Patrol Gloves have a rich look while providing warm, plush comfort for cold weather use. Features soft sheepskin leather. Digitized print in the palm increases surface area to allow for a better grip. C70 Thinsulate™ insulation with a soft brushed tricot inner liner. Leather cinch straps provide a snug fit to block out the cold

Ideal duty gloves for cold weather patrol. Constructed of soft, durable cowhide. C70 Thinsulate™ insulation and cotton/acrylic blend secondary liner keeps hands warm. Extended, shirred wrists help keep wind out of the jacket cuffs and allows for easy removal TLD40

Available in sizes s-xxl

WPG100

Available in sizes s-xxl

arctic Patrol™

mitten re-trak™

The Arctic Patrol™ Gloves are made to help you beat the elements with multi-layered protection. Constructed of a breathable, waterproof Hipora® liner, 100g Thermolite® insulation and a water-resistant 100% polyamide shell. A polyester/ polyamide lining provides additional warmth and comfort. Rubberized Sure-Grip™ palm with ‘trigger control’ index finger provides grip and control for use with a firearm

For particularly harsh elements, the Mitten ReTrak™ Gloves are warm, comfortable and versatile. Convert to the half-finger gloves for full touch and dexterity by flipping back the finger covers. Lightweight C-100 Thinsulate™ insulation breathes and keeps you warm even in damp conditions. Tight elasticized cuffs keep out wind and snow

APG30

256

Available in sizes s-xxl

MG100

Available in sizes s-xxl

Available in sizes s-xx

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

GLOVES Gloves by hatch Duty Duty specialist® all-weather neoprene shooting/Duty

lycra®/clarino™ cycling Practical, comfortable cycling gloves for a sure grip and great control. LYCRA® backing and hook and loop wrist closures provide a snug yet forgiving fit. Clarino™ synthetic leather palms with foam padding provide grip and help reduce vibration and trauma to the hands and wrists. Absorbent terry cloth on the backs of the thumbs to wipe away perspiration

Extreme-Grip™ sewn onto palm and fingertips for maximum grip Synsi-feel™ synthetic leather for excellent grip and accurate feel Neoprene fabric for comfort, flexibility and warmth Hook and loop closure with rubber cover to prevent the hook and loop from catching on clothing and causing pilling

PC290

Ideal for all-weather weapon use and all-day wear. The snug, comfortable fit has made them a favorite choice of law enforcement professionals. Also available with Thinsulate® liner (see page 14). Constructed of neoprene for comfort, flexibility and warmth. Palms made of Synsi-feel™ synthetic leather for excellent grip and accurate feel. Extreme-Grip™ sewn onto palms and fingertips for maximum grip. Hook and loop closures keep gloves firmly in place NS430

Available in sizes s-xxl

shearstop™ full-finger cycle These gloves feature the revolutionary LiquiCell® technology in the palms that provide superior comfort and performance. LiquiCell® technology significantly absorbs shock. Strategically placed grip pads for control. Terry cloth thumbs for sweat removal. Lycra® backs for exceptional fit FLG250

Available in sizes s-xxl

Available in sizes xs-xxl

LiquiCell® is an innovative liquid-filled padding technology that combines a low-viscosity fluid and strategically placed baffles, which significantly reduces pressure and absorbs shock.

Handler™ Sure-Grip™ sewn on bias helps prevent wear Hook & loop closure keeps gloves firmly in place Absorbent terry-cloth thumbs for sweat removal Patented Cut-Ring

Patrolman™ with Kevlar®

The new Handler glove is designed especially for managing canines while on duty. Also ideal for equestrian use. Made of durable and highly abrasion resistant goatskin, it features extra leashstrap protection on the palm. The glove fits snugly, allowing sufficient dexterity for frisking, searching and weapon control. Patented Cut-Ring stitching allows optional removal of the index finger for trigger control, without unraveling the remaining edge. High density foam for finger protection. Exclusive lateral finger protection. Neoprene back. Aniline goatskin leather. Absorbent terry cloth thumbs for sweat removal. Sure-Grip™ patches sewn on bias helps prevent wear. Hook & loop closure keeps gloves firmly in place HK9100

Head Office: 1-866-652-2877

Form-fitting, ergonomically cut, shooting gloves featuring the excellent cut-resistance of KEVLAR® protection on the back of the hand. Synthetic leather palms with our Extreme-Grip™ non-slip material in the cradle to provide a sure grip for accurate weapon control. Lightweight and washable KPG200

Available in sizes s-xxl

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

257

GLOVES Gloves by hatch duty duty Dura-thin™ Police search Duty

elite marksman™

Our Dura-Thin Search Gloves are one of the best selling leather law enforcement models of all time. Unlined and constructed from soft, durable premium leather that is cut “second-skin” thin for superior feel and dexterity while shooting, searching, handcuffing or driving. Wrist-length elasticized cuff provides a snug fit and will not interfere with jacket or shirt cuffs

Designed “second-skin” thin for maximum sense of touch for the professional shooter and made with the finest materials available. The palms are made of ultra thin leather with “second-skin” thin cut allowing maximum dexterity and tactility. For positive weapon control, the cradle areas feature our Extreme-Grip™ non-skid material. Breathable Dynamic-Extreme fabric backs provide a snug fit. Hook and loop closure on the top of the hands ensure a custom fit. Hatch Signature Ergo-Cut™ for the ultimate fit

SG20P

Available in sizes s-xxl

EM007

Available in sizes s-xxl

cooltac™ motor officer This breathable, lightweight glove was designed to offer protection specifically for motor officers who work in warmer climates. 3D knit spacer fabric provides shock absorption and 100% airflow creates a cooling effect. Stretch fabric in fourchettes allow the gloves to mold to your hand, eliminating the bulk between fingers, providing a greater range of motion. .5mm hair-sheep leather palm for excellent tactility. Extreme-Grip™ on palm for greater weapon control. Features Hatch signature Ergo-Cut™ for the ultimate fit. Strategically placed padding in palm provides shock absorption. Shorty wrist length design with bilateral spandex V inserts for snug fit and easy on and off CTM100

searchmaster™ with cabretta The Searchmaster with Cabretta is one of the finest unlined duty gloves available. Made with Cabretta hair-sheep leather from the world famous Pittard’s® Tannery of England. “Second-skin” thin cut allows maximum dexterity and sensitivity. Treated to repel water and will not harden or crack after exposure to rain or perspiration. Wrist-length, elasticized cuffs offer a snug fit that will not interfere with jacket or shirt cuffs SMX80

Available in sizes s-Xxl

Available in sizes s-xxl

cooltac™ Police Duty

Patrolman™ with sheepskin

A lightweight glove designed for officers who work in warmer climates to provide protection when handling suspects, and from burns on hot metal, etc. Offers excellent breathability and comfort. Back is a 3D knit spacer fabric for shock absorption and 100% unrestricted airflow for a cooling effect. Palm is constructed of .5mm hair-sheep leather for dexterity. Extreme-Grip™ provides weapon control and reinforcement of wear area. Features the Hatch Signature Ergo-Cut™ for excellent fit

The Patrolman is a favorite of highway and motorcycle patrol officers offering a rugged classic look and a soft, comfortable feel. Unlined and constructed entirely of thin-cut, super soft sheepskin allowing ample dexterity and tactility for duty use. Elasticized cuff ensures a secure fit

CT250

MW988S

Available in sizes s-xxl

the guardian™ Pathogen Protection Protects your hands from deadly microorganisms such as HIV, Hepatitis and Staph. Hipora® breathable fluid liner sewn into a premium leather shell (Test results are available regarding the 100% effectiveness of the Hipora® liner.). Meets O.S.H.A. Blood Borne Pathogens Standard (29CFR 1910.1030). Elasticized wrist-length cuff; won’t interfere with shirt cuffs

sure shot™ A high quality specialized leather shooting glove designed to allow the dexterity and sensitivity necessary for use with a weapon. Durable premium drum-dyed cowhide cut to a thickness that ensures maximum feel. Unlined for greater dexterity. FLEX™ design stitching allows greater movement. Hook and loop closure ensures a snug, comfortable fit BSG170

258

BG800

Available in sizes s-Xxl

Available in sizes s-xxl

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical lights Tactical Lights by Adventure Lights The guardian™ TM

the lightest brightest light in its class™ VIEWING ANGLE UP TO 270º

HEIGHT 1" 25.4 cm

WIDTH 1.25" 3 cm

LENGTH 1.62" 4 cm

The Guardian™ is the lightest, brightest, toughest light in its class. This light, unlike its competitors, is visible from all sides (omnidirectional) and extremely impact resistant. In addition, the Guardian™ is very lightweight and will not restrict movement. Up to 300 hours of light is available in flashing mode and up to 100 hours in steady on mode. The product comes with a variety of attachments that can be fastened to either the user or to the equipment. The light is available with either a belt clip, wrist strap/arm band, swivel clip key chain attachment, or magnetic base. The Mocking Bird™ version is also user programmable and in wide use for IFF applications.

• • • • • •

Unprecented visibility and durability Battle proven since 1998 The most versatile light in its category Simple twist activation even with gloves New scratch & impact resistant lens Light weight molded housing

TEMP. RANGE -40º F +150º F -40º C +65º C WEIGHT 0.8 oz. / 20 g VISIBILITY Up to 2.5 mi. Up to 4 km WATERPROOF Up to 330 ft. Up to 100 m

accessories

IR model shown IR model shown

Belt Clip 49000 This clip snaps easily onto the base of the Guardian™ allowing the light to be attached to belts, clothing, equipment, collars, and a variety of other objects. Universal Mount™ 98001 The unique Universal Mount™ enhances the versatility of the standard Guardian™. The Guardian™ light snaps onto the mount with its belt clip and allows it to be pivoted 180 degrees in 10 degree steps. The mount can sit flat on hard ground with its retractable legs which provide a stable base for the Guardian™ to pivot. It can also be hammered into soft ground with its built in spike. The mount also allows the Guardian™ to be strapped or screwed to trees or walls The base will also attach to metal objects with its strong magnets. Finally the mount allows the Guardian™ to be worn comfortably as a head lamp. Like the Guardian™ itself the Universal Mount™ is unmatched in its form and function.

Wrist Strap 49004 This strap, which attaches to the base of the Guardian™, can be fastened to the arm or wrist, as well as such things as backpacks, footwear, bicycles, etc.

IR model shown

Belt Clip 49000 This clip snaps easily onto the base of the Guardian™ allowing the light to be attached to belts, clothing, equipment, collars, and a variety of other objects.

Guardian™ Survivor Light™ 49009 This kit includes a water activated switch with a unique manual override mechanism. Attachments are available for life jackets, rafts and survival suits.

Backpack Attachment 49007 This attachment has a plastic hook clip on a Velcro strap and is ideal for attaching to backpacks, hiking gear, sleeping bags, etc.

IR model shown

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

259

tactical lights Tactical Lights by Adventure Lights The guardian™ Guardian™ Mockingbird™

The Guardian™ Mockingbird™ can be programmed in the field using any IR light source or standard white flashlight. This light can copy and transmit any IR or white signature that is put in front of it; with up to twenty seconds of recording time the possibilities are endless. The Guardian™ Mockingbird™ can also clone itself to another IR Guardian™ or any of our cutting edge VIPIR™, Mockingbird™ or Quantum™ products. The Guardian™ Mockingbird™ also features our Reverse Polarity Program Switching™. By simply flipping the battery the user can easily and safely switch between programming and transmission mode.

IR 52187

Yellow 57180 Red 57181 Blue 57182 Green 57183 White 57184

Guardian™ Dual Function IR

IR 52101

The light has both a flashing and steady-on IR function that can be accessed by simply flipping the battery.

Guardian™ Dual Function

Yellow 52000 Red 52001 Blue 52002 Green 52003 White 52004

The light has both a flashing and steady-on function that can be accessed by simply flipping the battery. The light is available with either a belt clip, wrist strap/arm band, swivel clip key chain attachment, or magnetic base.

Guardian™ Dual Function Headlamp

white 57000

This version of the Guardian™ comes with a comfortable headband and features a steady-on white light that will also flash SOS in an emergency with a simple flip of the battery.

Guardian™ Light For Running

red 51001

By very popular demand this economical version of the Guardian™ is available as the perfect companion for nighttime and early morning training sessions. The light lasts over 150 hours on one set of batteries and comes with a belt clip and wrist band.

accessories Bike Light Attachment 49005 This clip allows for easy mounting on most bicycles and bicycle helmets

Head Strap 49006 This comfortable band can be attached to any Guardian™ to make an effective head light. IR model shown

Lithium Cellpak for Guardian™ 49010 The Guardian™ uses common CR-2032 Lithium Cell Batteries. Two (2) pre wraped cells are used in all Guardian™ models.

260

Helmet Attachment 49002 These simple two sided Velcro attachments allows for the easy installation of the Guardian™ on the back of helmets for easy identification and crowd control coordination.

Head Office: 1-866-652-2877

West: (604) 526-1631

IR model shown

Dog Collar Attachment 49003 This small band allows for the attachment to Military Working Dog collars and harnesses.

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical lights Tactical Lights by Adventure Lights Lazer stik™

The versatile alternative to chemical light sticks

Length 6-8" 15-20 cm

360o viewing angle

diameter 0.8" 2 cm

• Economical, environmentally safe alternative to Chemical Sticks • Battleproven since 1997 • Simple twist activation with or without gloves • The most versatile light in its category • New scratch and impact resistant lens • Light weight molded housing • Fits most Chemical Stick accessories The Lazer Stik™ is a direct replacement for chemical light sticks. Unlike chemical lights, the Lazer Stik™ will operate in hot and cold temperatures. The dual function version has both steady-on and flashing functions, is water-resistant and even floats upright. Our light outlasts chemical lights in operating time and brightness and can be turned on and off. Compared to other attempted copies of our electronic light stick product our original is more efficient, rugged and dependable. Our light has proven itself in active service since 1997. Our products durability is unmatched in the field.

Waterproof Up to 330 ft. Up to 100 m Visibility Up to 2 mi. Up to 3.2 km Temperature Range +150o F -4 Fo -20o C +50o C Weight 1.2 oz. 32 g

accessories

Universal Mount™ 99001 The unique Universal Mount™ enhances the versatilityof the standard lazer Stik™. The LazerStik™ light straps onto the mount andallows it to be pivoted 180 degreesin 10 degree steps. The mount cansit flat on hard ground with itsretractable legs which provide a stable base for the lazer Stik™to pivot. It can also be hammered into soft ground with its built in spike. The mount also allows the Lazer Stik™ to be strapped or screwed to trees or walls. The base will also attach to metal objects with its strong magnets. Like the Lazer Stik™ itself the Universal Mount™ is unmatched in its form and function.

Head Office: 1-866-652-2877

West: (604) 526-1631

Extra Holder 19000 This holder makes it easy to carry three A76/LR44 coin cells. The holder can be inserted into the Lazer Stik™ and also makes it easier to flip the batteries tochange functions.

Alkaline LR44/A76 Coin Cell 90001 This popular and widely available watch battery can be purchased from us in bulk at attractive pricing. This battery is used in our standard dual function Lazer Stik™ NOTE: To use AA Batteries please purchase our AA Lazer Stik™ version

Prairies: 1-866-652-2877

East: 1-877-993-9968

Spike 19002 This strong spike can be hammered into the ground to secure the Lazer Stik™ in hard and soft ground.

Key Ring 19001 The Lazer Stik™ is built strong enough for high impact and can withstand considerable pressure. With the key ring attachment the Lazer Stik™ is easier to hold and maintain a solid grip.

261

tactical lights Tactical Lights by Adventure Lights Lazer stik™ Lazer Stik™ - Dual Function The Lazer Stik™ can be switched from Steady-On to Flashing Mode by simply flipping the battery. Up to 40 hours of light is available from one set of three A76/ LR44 batteries, (up to 75 hours of light isproduced in flashing mode). Considering that replacement batteries cost less than non-reusable chemical sticks, that the Lazer Stik™ offers cold weather operation, and that the user can control the light, chemical sticks are no longer a logical or environmentally friendly choice. Colors Available: Yellow 14000 Red 14001 Blue 14002 True Green 14003 White 14004 IR 14101 Custom colors available on request

Lazer Stik™ AA - Steady On This steady-on version of the Lazer Stik™ uses a single AA battery to power this bright light for up to 50 hours. The handle forms a comfortable grip while allowing for easy attachment to straps and other accessories. Colors Available: Yellow 18000 Red 18001 Blue 18002 True Green 18003 White 18004 IR 18101 Custom colors available on request

262

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical lights Tactical Lights by Adventure Lights vip™ signal light - the original engineered to extremes and built to last™

1º-180º VIEWING ANGLE (model dependent)

HEIGHT 1.35" 3 cm

WIDTH 2.0" 5 cm

LENGTH 3" 7.6 cm

We were the first to design an elegant one-hand operated, ergonomically designed multi-function LED light back in 1994. We built the VIP with a rugged and revolutionary body that melded the housing to the circuit board as one solid unit. This design is still unmatched for its durability and intrinsically safe properties. Tested in deserts, the Arctic, in the stratosphere and hundreds of feet below the sea, the VIP™ has proven to hold up to the demands of extreme environmental conditions and unpredictable terrain.

• All VIP™s are explosion proof & intrinsically safe • Battle proven since 1995 • Three (3) functions activated with our Positive Feedback Rotary Switch™ • New scratch resistant lens • Imitated but never matched • Unsurpassed construction Rugged & dependable TEMPERATURE RANGE -40ºF +150º F -40ºC +50º C WEIGHT 4 oz. 112 g WATERPROOF Up to 330 ft. Up to 100 m VISIBILITY Up to 2.5 mi. Up to 4 km

accessories

Universal Mount™ 99001 The unique Universal Mount™enhances the versatility ofthe standard VIP™'s built inbelt clip. The VIP™ light snaps onto the mountand allows it to be pivoted180 degrees in 10 degree steps. The mount can sit flat on hard ground with its retractable legs which provide a stable base for the VIP™ to pivot. It can also be hammered into soft ground with its built in spike. The mount also allows the VIP™ to be strapped or screwed to trees or walls The base will also attach to metal objects with its strong magnets. Finally the mount allows the VIP™ to be worn comfortably as a head lamp. Like the VIP™ itself the universal mount is unmatched in its form and function.

Head Office: 1-866-652-2877

West: (604) 526-1631

Head Strap 99001-1 The universal mount™ can be ordered separately or with the headband attachment for maximum versatility.

Vehicle Adapter Cap 99004 This adapter allows the VIP™ to be plugged directly into the vehicles power accessory jack. It can also be hand wired to other 12 V. power sources.

AA Adapter for alkaline Cells 99003-1 This adapter replaces the standard cap and allows for an AA battery to be used in place of the standard 123A. Both AA and 123A batteries can be used with the same adapter.

Trigger Cap/Trip Wire 99006 By popular demand we are providing a series of autonomous switching devices for the VIP™ and VIPIR™. The trip wire uses standard clear monofilament to trigger the VIP™ to turn on in any of its manually preselected modes.

Prairies: 1-866-652-2877

East: 1-877-993-9968

263

tactical lights Tactical Lights by Adventure Lights vip™ signal light - the original

VIP™ (1 LED)

The first of our VIP lights, this model features a high output, focused amber/ orange LED. The light features a steady-on flashlight mode, an SOS visual signal and a quick flashing marker light function. The light beam and color is optimized to enhance visibility and help penetrate smoke and fog. This model is very popular with both Firemen and Scuba Divers. The light has won numerous awards including “best pick” for marker lights by the editors of Scuba Diving Magazine.

VIPIR™ (1 LED, 3 LED, 5 LED)

This series of covert-only lights have the same functions as our standard VIP™. They are available in one (1), three (3), or five (5) LED models.

VIP™ (5 LED)

These five (5) LED lights are ideal where the need for high output, single colored lights is required. The light has three positions; steady on, SOS, and a 60 beat per minute strobe (in blue, green and white models). The strobe in red or yellow models operates at over 140 beats per minute. The lights are used for Drop Zone (DZ) and Landing Zone (LZ) applications.

VIP™ – Police and Security Strobe (5 LED)

This series of lights feature night vision preserving flashlight modes and a multi-color police take down strobe. The 2606 model features red, white and blue light. The 2606-2 model features white and blue light. The 2607 model features white and red light. Different color combinations are available to meet state color regulations. Finally a yellow and white light model (2610) is available for road crews, construction, and as road assistance markers.

1 LED yellow case 1 LED black case

02100 02200

1 LED IR 3 LED IR 5 LED IR

02201 02203 02205

5 LED Blue 5 LED Green 5 LED Red 5 LED White 5 LED Yellow

02502 02503 02504 02505 02506

Red/White/Blue White/Blue Red/White Yellow/White

02606 02606-2 02607 02607-2

accessories

264

Remote Control Cap 99007 To complement our long range remotes this short range adapter allows the VIP™ to be controlled securely from up to 2,000 feet with a tiny key fob. The applications are endless.

Light Shield 99010 In the field it is sometimes advantageous to narrow the viewing angle of the VIP™. The light shield will allow only direction viewing of the light. The shield is flexible and soft so it is easy to carry or pack and will not break.

Water Activated Cap 99008 Many VIP™'s are used in personnel recovery operations, this cap allows the VIP™ signal light to be more customized for life jacket or raft applications. The water activated cap has a manual override for extra safety.

Light Diffuser 99010-1 This accessory makes the VIP™ more omnidirectional and allows the light to glow for viewing from the side. Like the light shield this item is easy to carry or pack and will not break.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

tactical lights Tactical Lights by Adventure Lights

Vipir™ Signal Light Quantum FX™ Chameleon™ The Quantum FX™ represents the pinnacle of our user controlled and field programmable lights. This light series is our flagship product line and gives the user control of up to four light spectrums (including IR) and the ability to field program both the light signatures of each color and their respective intensity. To top up the feature set, preprogrammed sensors are built into the light to activate specific instruction sets when triggered remotely by IR, Laser, or RF signals. This last feature has a multitude of uses, IFF and fratricide reduction being one of the most important. The Chameleon™ like its namesake features the ability to both adapt and interact with its environment.

Vipir™ Signal Light Legacy The Light That Set The Standard The Legacy series represents those VIPIR™ lights that have set the standard for multifunction LED lights since 1995. Commissioned in almost every allied mission since the Gulf War these lights have proven their worth. Designed in cooperation with some of the world’s most elite fighting forces, these lights have and continue to meet the challenges of real world applications including IFF (Identification Friend or Foe), illumination and signaling in the harshest environments.

Vipir™ Signal Light Gen 4 Mockingbird™ The Next Generation Building on the success of the Legacy series, the Gen 4 is the next generation. The light features three overt light modes and three covert light modes. For the ultimate in safe illumination just flip the battery and you have a covert only light, flip it again and you have an overt light with three positive feedback positions. To round out the lights’ flexibility, the steady on IR mode can be programmed in the field to an infinite number of light patterns using any IR light source. The light can even mimic other IR lights or be cloned directly from other VIPIR™’s. This light has become fondly known as the Mockingbird™.

accessories

Kit configuration 02610-KIT This kit includes a small waterproof case with 10 VIPIR™'s, 10 universal mounts, and 10 123A batteries. The case will also fit 10 AA adapters and 10 additional AA batteries. Case size: 10" X 9" X 5"

Head Office: 1-866-652-2877

West: (604) 526-1631

Remote Hand Switch Cap 99005 This is a waterproof and robust 18” cable attached to a two position switch that can be used to activate the VIP™.

Light Pouch with Reflector 99002 This pouch is lined with reflective material and was first developed for Search and Rescue applications. Some special ops forces found it useful for intensifying and directing the light from the VIP™ at night, as well as a nice mirror to use during the day. In keeping with the VIP™ light tradition this accessory has more than one function or application. By the way the pouch is a nice way to carry the unit and comes in various camouflage colors. Black Pouch with Thermal Patch 99002-1 This pouch is lined with a Thermal Reflecting material so when it is open it will help identify itself to thermal imaging cameras. In combination with the VIPIR™ it is a simple and effective way to communicate with both Thermal Imaging and Night Vision equipment.

Prairies: 1-866-652-2877

East: 1-877-993-9968

265

FIREARMS SIGHTS Laser Alignment Systems by REC-T-FIRE THE REC-T-FIRE SYSTEM REC-T-FIRE's PROHUNTER SERIES The ultimate laser bore sighting tool kit, designed for usage by professional gunsmiths. Combine the field diagnostic ease of the caliber-adaptor and the muzzle adaptor's pin-point precision for the firing tunnel.

The Rec-T-Fire system is based on laser technology - the same accurate technology used for surgery, range finders, surveyors' equipment and deep sea mapping. This safe and reliable tool will enable you to align the scope or sight of your firearm with dead-on accuracy in only a few seconds, saving time, ammunition, and missed opportunities. A dropped rifle on hunting day can be resighted on the spot, silently, and within a few seconds, immediately ready for a trophy. For the serious hunter or shooter Rec-T-Fire is absolutely indispensable. HOW DOES IT WORK? The user positions himself at 10 to 25 meters (30 to 75' depending on caliber used) from the chosen target. After installing the chosen adaptor aim the projected laser beam at the target. Then, using your adjustments, centre the sights or crosshair on the laser dot. Your sight has now been aligned to provide a hit accuracy within a maximum of 11 cm at 100 meters or 4" at 100 yards. (Some variations may occur depending on the firearm's quality and cleanliness.) Should it be at that maximum, the user can very easily and substantially increase the accuracy by fine-tuning the adapter. This can be done in less than 5 minutes through a very comprehensive step-by-step instructional procedure.

System includes: • 1 laser module; • 1 muzzle-adaptor; • 1 matching caliber-adaptor; • 1 extracting tool; • 1 silver oxide battery stack. Comes in a sturdy lightweight carrying case

REC-T-FIRE's PRO Series This muzzle adaptor was designed for the professional. Manufactured from top quality materials, it is precisionmachined for a perfect fit into the firearm's muzzle. This system's accuracy has been certified by the CANADIAN NATIONAL DEFENSE LAB and has been field-tested by various police tactical squads. It comes in a sturdy lightweight carrying case. System includes: • 1 laser module; • 1 muzzle-adaptor; • 1 silver oxide battery stack. Comes in a sturdy lightweight carrying case

WARNING: Occasional hunters need to be informed that the muzzle adapter could be a cause for potential serious accidents should the weapon be fired while the muzzle adapter is still inserted into the firearm's muzzle.

A wide range of calibers available from .22 rim fire to .50 BMG. Additional premium brass spuds can be ordered separately to expand your basic kit.

This system was developed specifically for hunters. Manufactured from top quality materials and machined according to SAAMI and CIP specifications for a perfect fit into the firearm's chamber. The system's accuracy has been certified by the CANADIAN NATIONAL DEFENSE LAB and has been field-tested by experts throughout Canada and the USA. It comes in a sturdy lightweight carrying case. System includes: • 1 laser module; • 1 extracting tool; • 1 caliber-adapter; • 1 silver oxide battery stack. Comes in a sturdy lightweight carrying case.

CALIBER ADAPTORS A wide range of calibers available from 30-06 rim fire to 12 gauge shot gun. Additional cartridge blanks can be ordered to expand your basic kit.

Carbide Lamp Kit by GUNHOUSE GUNSMOKE • • • •

combines the excellence of a carbide lamp with the convenience of a cigarette lighter. is handsomely machined from polished heavyweight aluminum, with no stamped parts to break or wear out. is filled with regular carbide and you're set for an entire day of shooting! comes complete with plastic squeeze bottle, full instructions, and carrying case. N.B. Carbide is not included with kit. kits each come fully guaranteed to insure your complete satisfaction. can blacken sights when less effective methods fail.

266

REC-T-FLECTOR

Long-life 4.5V replacement battery stack for MKII.

A highly reflective plastic target for use in the field. Tack it up and confirm your hunting precision.

MUZZLE ADAPTOR

REC-T-FIRE's HUNTER Series

• •

RT3P

HUNTER KIT RTFK-1 RTFK-2 RTFK-3 RTFK-4 RTFK-5 RTFK-6 RTFK-7 RTFK-8 RTFK-9

PRO KIT RTFK - 177 RTFK - 220 RTFK - 223 RTFK - 264 RTFK - 270 RTFK - 284 RTFK - 300 RTFK - 311 RTFK - 338 RTFK - 390 RTFK - 442 RTFK - 357 RTFK - 500

CALIBER ADAPTOR RTCA-1 RTCA-2 RTCA-3 RTCA-4 RTCA-5 RTCA-6 RTCA-7 RTCA-8 RTCA-9 RTCA-12

CALIBER 30-06 / 270 / 25-06 / 35 Whelen / 8-06 / 338-06 308 / 243 / 260 / 7-08 / 358 / 307 / 356 7mm Rem Mag / 264 Win Mag / 338 Win Mag 300 Win Mag 303 British 300 Weat. Mag / 340 Weat. Mag 7mm Weat. Mag / 270 Weat. Mag / 257 Weat. Mag 280 Rem (7mm Express) 7 X 64mm 12 Shotgun

MUZZLE ADAPTOR RTMA -177 RTMA -220 RTMA -223 RTMA -264 RTMA -270 RTMA -284 RTMA -300 RTMA -311 RTMA -338 RTMA -390 RTMA -442 RTMA -357 RTMA -500

CALIBER 177 Pellet 22 Long Rifle / 22 Hornet / 22 Savage 223 Rem / 5.56mm / 22 Win Mag / 22-250 / 220 Swift / 222 Rem / 225 Win .. 260 Rem / 264 Win Mag / 6.5mm 270 Winchester / 270 Weatherby 280 Rem (7mm Rem Exp) / 284 Win / 7mm Rem Mag / 7mm Weat Mag ... 30-06 / 308 / 30-30 / 300 Win Mag / 300 Sav / 300 Weat Mag / 300HH / 7.62 ... 303 Brit / 32 Colt + NP / 32 Hr Mag / 32 Auto / 32S&W / 32-20 Win / 8mm ... 338 Lapua / 338 Win Mag / 338 Weat Mag 40 S&W, 10mm 45 Colt, 45 Auto, 45 Auto Match, 45 Auto rim, 45 Win Magnum 357 Mag / 38 Special / 9mm Luger / 38 Colt ... .50 Muzzleloader

PRO HUNTER KIT RTFK 1-300 RTFK 1-270 RTFK 2-300 RTFK 3-284 RTFK 3-338 RTFK 4-300 RTFK 5-311 RTFK 6-300 RTFK 6-338 RTFK 7-270 RTFK 7-284 RTFK 8-284

CALIBER 30-06 Springfield 270 Winchester 308 Winchester 7mm Remington Magnum 338 Winchester Magnum 300 Winchester Magnum 303 British 300 Weatherby Magnum 340 Weatherby Magnum 270 Weatherby Magnum 7mm Weatherby Magnum 280 Remington (7mm Remington Express)

ACCESSORIES RT3P RTFT

DESCRIPTION Batteries 4.5 Volt for Laser Mark II REC-T-FLECTOR Laser Enhancing target

* The cartridge system accuracy is dependent upon tolerances in the chamber of the rifle

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS SIGHTS Night Sights by MEPROLIGHT TRITIUM NIGHT SIGHTS FOR HANDGUNS

MEPROLIGHT BERETTA ML10662 ML20662 ML10663 ML10664 ML10665

MEPROLIGHT night sight systems are available in both fixed and adjustable versions for most popular pistols and revolvers. These sights offer a clear and sharp sight picture that is unsurpassed by any other brand of sight, regardless of light conditions.

Beretta 92F series fixed sights Beretta 92F series adjustable sights Beretta Cougar Beretta Brigadier Beretta Stock

BROWNING ML10882 Browning Hi-power fixed sights ML20882 Adjustable Browning Hi-power fixed sight ML10884 Browning “BDM” ML10885 Browning Hi-power MKIII w/dovetails ML20885 Adjustable Browning Hi-power MKIII w/dovetails COLT ML10771 ML20771 ML10774 ML10775 ML10776 ML20761 ML20776 ML20766 ML20772 ML20773

Colt Gov't series .055 front tenon Adjustable set Colt Gov't series .055 front tenon Colt 2000 pistol Competition set Colt Gov’t Pistols Colt Gov't series .125 front tenon Adjustable set for Colt Gold Cup .055 front tenon Adjustable set for Colt Gov't .125 front tenon Adjustable set for Colt Gold Cup .125 front tenon Adjustable set for Colt Python Adjustable set for Colt King Cobra

CZ ML17777 ML17778 ML27777

Sight set for CZ-75 Compact and CZ-83 Sight set for CZ-75 and CZ-85 Adjustable set for CZ-85

GLOCK ML10222 ML10224 ML10225 ML20224 ML10226 ML20225

Sight set for Glock 20, 21 screw-on front Sight set for Glock 17, 19, 22, 23 screw-on front Sight set for Glock 17, 19, 22, 23 stake-on front Adjustable set for Glock 17, 19, 22, 23 screw front Sight set for Glock compact screw-on front Adjustable set for Glock 17, 19, 22, 23 stake front

IMI ML19595 ML19596 ML29595 ML 29596

Sight set for Baby Eagle with dovetails Sight set for Desert Eagle pistol Adjustable set for Baby Eagle with dovetails Adjustable set for Desert Eagle

MEPROLIGHT sights are the brightest sight available today, appearing 30% brighter than other brands. Additionally, all MEPROLIGHT front dots are purposely brighter than the rear dots, encouraging a focus on the front sight and beyond. MEPROLIGHT sight tubes are sealed by a patented bonding process that makes them impervious to solvent bath immersion for up to 48 hours. It also seals them against more common hazards like water, dust and oil. Two-colour combinations preferred by many defense experts are offered in most popular fixed sight systems. The front dot is always green, with the choice of a twodot rear in green, yellow or orange. MEPROLIGHT was the first manufacturer of Tritium sights to receive the prestigious ISO 9002 certification. The world's finest firearm manufacturing companies like Kimber, Beretta, Glock, Browning, Benelli, H& K and Remington depend on MEPROLIGHT as their source for night sights. There is no substitute for MEPROLIGHT quality. Compare and you will agree.

West: (604) 526-1631

Prairies: 1-866-652-2877

Sight set for Kahr K-9 and K-40

KIMBER ML11210 ML11211 ML21210

Sight set for Kimber full size Sight set for Kimber compact Adjustable sight set for Kimber Target Pistol

RUGER ML10990 ML10991 ML10994 ML20990 ML20991 ML20996

Sight set for Ruger P-85 or P-89 Sight set for Ruger P-90 or P-91 Sight set for Ruger P-94 Adjustable sight set for Ruger P-85 or P-89 Adjustable sight set for Ruger P-90 or P-91 Adjustable set for Ruger GP100 & Super Redhawk

SIG SAUER ML10110 Sight set for Sig P220, P225, P226, P228 ML20110 Adjustable sight set for Sig P225, P226, P228 ML10129 Sight set for Sig P229 MAGNUM RESEARCH ML19596 TD fixed Desert Eagle .357 and .44 SIG SAUER ML12735 TD fixed 915, 411 non Novak style ML12740 TD fixed Sigma V ML12745 TD fixed 457 ML12791 TD fixed 908, 910 ML22736 TD adj. 3900, 4000, 5900 ML11735 TD fixed Novak repl. 3900, 4000 full sz. 5900, 6900 ML11744 TD fixed Novak repl. 1000, 4000, 4500 compact ML11755 TD fixed Novak repl. 1000 and 4500 full size ML22770 TD adj. K, L& N frame w/red insert frt, adj. rear HECKLER & KOCH ML11515 Sight set for H&K P7-8 & P7-13 ML11516 Sight set for H&K USP pistol ML11517 Sight set for H&K USP compact pistol ML11518 Sight set for H&K Mark 23 pistol ML21516 Adjustable sight set for H&K USP STAR ML-17979 Sight set for Star “Firestar” 9mm & .40 cal

SMITH AND WESSON ML-10735 Sight set for S&W 5904, 5906 ML-10755 Sight set for S&W 4506 ML-11735 Sight set for S&W 3rd Gen 3900, 5900 & 6900 series ML-11744 Sight set for S&W 1000 & 4500 compact ML-11755 Sight set for S&W 3rd Gen 1000 & 4500 series ML-12730 Sight set for S&W 459, 659 with adjustable rear ML-12735 Sight set for S&W 915, 3900, 5900 & 6900 series ML-12740 Sight set for S&W Sigma ML-12745 Sight set for S&W 457 ML-12791 Sight set for S&W 908/910 ML-21755 Adjustable set for S&W 3rd Gen 1000 & 4500 ML-22735 Adjustable set for S&W 3rd Gen 3900, 5900 & 6900 ML-22736 Adjustable set for S&W 3900, 4000 & 5900 ML-22770 Adjustable set for S&W K, L & N frames

Head Office: 1-866-652-2877

KAHR ML15109

TANFOGLIO ML-16767 Sight set for Tanfoglio TA-90 E.A.A. “Witness” ML-26767 Adjustable set for Tanfoglio TA-90 EAA “Witness” TAURUS ML-16565 Sight set for Taurus PT-92 series ML-26565 Adjustable set for Taurus PT-92 series ML-26566 Adjustable set for Taurus WALTHER ML-18800 Sight set for Walther P99 REVOLVER - ADJUSTABLE ML22769 Universal TRU-DOT front sight for fixed sight

East: 1-877-993-9968

267

FIREARMS SIGHTS Night Sights by MEPROLIGHT TRITIUM NIGHT SIGHTS FOR HANDGUNS

NIGHT SIGHT INSTALLATION TOOL FOR HANDGUNS UNIVERSAL SIGHT INSTALLATION TOOL ML40440 U.S.I.T. installation tool

FACT

Aiming a pistol under normal daylight conditions and hitting the target requires minimum effort. But. . . , under low light conditions, standard sights become ineffective. FBI statistics indicate that 80% of officer shooting injuries take place in low-light or no-light conditions. Painting three white dots on the sights offers only marginal improvement. MEPROLIGHT’s solution is to supplement or replace the painted

white dots with small self-contained tritium lights that enhance shooter capability under low-light conditions. TRU-DOT models offer a handgun sighting system for improved rapid instinctive aiming which requires no transition from day to night use. Day and night, the shooter’s aiming reference are three solid dots, identical in appearance and location under all light conditions.

TRITIUM NIGHT SIGHTS FOR RIFLES AND SHOTGUNS MEPROLIGHT sights are used by military forces on six continents. There is no more demanding customer, and this experience has been integrated into night sights for sporting rifles and shotguns. Systems are available for AR-15 type rifles (*with day and night rear

aperture), Remington semi-automatic rifles and pump shotguns. A Tritium shotgun bead front sight ideal for waterfowl and turkey hunters is also available. Tactical sights are also offered for the Benelli M1590 and M4590 ghost ring shotguns. BENELLI ML-34301 Sight set for Benelli M1/M3 ghost rear ML-34302 Sight set for Benelli M4 & S90 ghost rear

BERETTA ML-30660 Sight set for Beretta IMI ML-39510 ML-39511 ML-39520 ML-39522 ML-39540

SIMINOV ML-33111 Sight set for Simonov SKS ML-34045 Shotgun bead 6-48 thread size (new improved)

Sight set for Mini-Uzi & Uzi adjustable rear Sight set for Uzi non-adjustable rear Sight set for Galil Sight set for Micro-Galil Sight set for Micro-Uzi

STK ML-31810 Front sight for Ultimax KALASHNIKOV ML-33110 Sight set for Kalashnikov AK-47

MOSSBERG ML-38501 Front sight for Mossberg M500 and M590

CVA ML-36006 Hawken series CVA black powder

COLT ML-31615 ML-31616 ML-31617 ML-31618

FN ML-35010 Sight set for FN 7.62 MAG ML-35011 Sight set for FN 5.56 FNC rifle ML-35034 Sight set for FN 5.56 Minimi and FNMI M249 SAW

HECKLER ML-31505 H&K SR9, SP89, M91, M93, MP5 front sight only ML-31506 Sight set for H&K SR9, SP89, M91, M93, MP5 ML-31507 Sight set for H&K G3/G41

REMINGTON ML-34660 Set for 4, 6, 870, 1100, 7400, 7600, 11-87 slug guns ML-34661 Set for 7LW, 700, 552BDL, 572BDL bolt action ML-34662 Remington Border Patrol front sight

RUGER ML-30922 Sight set for Ruger Mini-14

IMX ML-38010 Sight set for Crossfire twin barrel

268

Front sight for AR15/M16 (5-slots) Sight set for AR15/M16 open rear (5-slot front) Sight set for AR15/M16 peep rear (5-slot front) Sight set for AR15/M16 peep rear - combat

REMINGTON, WINCHESTER BROWNING ML-35501 Rear ghost ring - Remington, Winchester, Browning ML-35502 Rear sight for Remington, Winchester, Browning ML-35505 Front - Remington, Winchester, Browning

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS SIGHTS Night Sights by MEPROLIGHT OPTICS/ELECTRO OPTICS MEPRO 21 TARGETING SYSTEM

M203 GRENADE LAUNCHER SIGHT No batteries. No switches. Fiber optic illuminates dot onto lens in daylight conditions and Tritium powers fiber optic in low light situations to give you a red dot picture. It’s just that simple. This revolutionary system automatically adjusts itself depending on the amount of ambient light that is available. Dot size:

• • • • • •

No Batteries Required Crisp red dot in daylight or low light No on/off switch Fits on standard weaver style base mounts Ideal for rifles, shotguns, handguns and bows Illumination warranted for 10 years

ML 68001 “Professional” - 4.2MOA ML68002 “Standard” - 5.5MOA Clamp mount to fit weaver rail

Mount System: Windage and Elevation adjustments: Click adjustable Overall size: 4.4”l x 1.5”w x 2”h Weight: 148 g Magnification: 1x Lens diameter: 30 mm

MEPRO RS-22 The MEPRO RS-22 is a maintenance-free, dual illuminated, “red dot” reflex sight especially designed for quick and instinctive accurate shooting with both eyes open. Illumination of the aiming point is achieved by a fiber optic collector system during the day and by a miniature self-powered tritium light source at night. The MEPRO RS-22 is suitable for use with Night Vision Goggles or scopes, including those with GEN III tubes. MEPRO RS-22 is the reliable choice. Designed and fabricated to the highest military standards to assure years of reliable operation under all field conditions, it has almost no moving parts and no electric circuits or batteries, and is not affected by submergence in water. With no switches, no battery or other external sources of power, the sight is always ready for action. Magnification: Lens Diameter: Field of View: Aiming Dot: Photochromatic Lens: Anti Reflection Device: Dimensions: Weight:

Unity (1X) Power 30mm Unlimited 5.5 MOA (4 Optional) Optional RS-22P option 122 mm x 38 mm x 56 mm (H) 250 gr

TRIFLEX (Not pictured) TRIFLEX is a multi-purpose sight combining visible and IR laser designators, a red dot reflex sight and tritium backup sights - all in one compact, lightweight and rugged body. The TRIFLEX sight is the unique result of a development effort based on the requirements of the Israel Defense Forces to combine the advantages of a reflex sight with those of a laser designator sight. TRIFLEX assures rapid target acquisition and positive strike point aiming on selected targets during both day and night operations - giving unparalleled flexibility to the soldier on all types of battlefields. The sight integrates a Red Dot reflex sight for ranges up to 500 meters and a laser designator sight for ranges of up to 100 meters, using both infra-red and visible lasers. Dimensions: Weight: Wave Length:

117 mm x 60 mm x 85 mm (H) 410 gr Red Dot (650-670 nm) Red Pointer (650-670 nm) Infra-Red Pointer (780-850 nm) Environmental: All weather resistant MIL-STD-810 - Tested Power Req’d: 2 x 1.5V type AA

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

The M203 Grenade Launcher has been in service with many armies throughout the world for almost three decades. Most commonly installed on the M16 series assault rifles, it supplies fire power against light armor and infantry targets to arrange of 350-400 meters. However, experience has shown that even after extensive training, achieving reasonable accuracy is problematic. Another major problem with this versatile weapon is that the standard issue M203 leaf sight supplied with the weapon is only useful during daylight hours. This sets a real tactical limitation on the grenade launcher regarding its use at night. MEPROLIGHT has solved this problem by developing a dual illuminated optical collimating sight. Functioning under all lighting and weather conditions for 5-8 years without the use of batteries or any other external source of power, the sight provides a 24 hour a day solution for the fighter. When installed on the M16 carrying handle, the sight allows use of the standard metal sights, as well. The GLS-203 dual illuminated optical sight is a real technological breakthrough. The compact unit (only around 2ˆ inches long) mounts onto the carrying handle of the M16 and is adjustable for both windage and elevation; and it can be mounted to standard sight rails with suitable adapters. During the day, a light collector tube concentrates available ambient light into a dot and projects it onto the sight lens. At night, a small tritium light source supplies the light for the dot.

Eye Relief: Field of View: Range: Resolution: Dot Size: Dot Intensity:

0-300mm 160° (both eyes open) 50 - 375 meters Increments of 25 meters 4 MOA Variable - automatic & Built-in Drift compensation Weight with integral mount adapter: 150g Dimensions (with adapter): 62 x 54 x 32 Mounting: Picatinny + custom

MEPRO FIREFLY The FIREFLY Multi-Purpose Illuminator/Designator supplies a comprehensive solution to four tactical situations packaged in one compact device. It is an indispensable device for fighting terror and in other close combat situations. This robust device provides the means for identifying and marking enemy targets and can be mounted on a wide variety of light weapons using ARMS, Picatinny and other standard mounts. The FIREFLY combines four different applications for identifying and marking enemy targets: Height 60 mm • Flashlight • Red Laser Designator Width: 44 mm • IR Flashlight • Infra-red Laser Designator Length: 96 mm Overall Weight: 200 grams

The flashlight has adjustable beam focus to fit the requirements Power Source: 2 x Lithium 123A of the terrain. The FIREFLY has a unique zeroing system for Laser Wave Lengths: Red (635-650 simplified windage and elevation adjustment. This advanced nm)Infra-Red (810-830 nm) Filter: Removable IR filter system assures accurate alignment of the application beams Eye safe lasers standard - high power relative to the weapon’s barrel. Factory adjusted to yield paral- lasers available as special order lel beams, if desired, the FIREFLY can be set at the factory for coincidental beams at customer required distances. The FIREFLY has been designed to provide years of reliable service even under adverse weather conditions, with simple disassembly for cleaning and battery replacement. The FIREFLY is equipped with two selector switches for choosing between the possible operating positions: Switch 1: • On - Constant operation • Off • Operation by P.T.T.

East: 1-877-993-9968

Switch 2: • Flashlight • Flashlight plus visible red laser designator • Visible red laser designator only • Infra-red laser designator only • Infra-red flashlight beam plus infra-red laser designator

269

FIREARMS SIGHTS

Laser Sights by LASER DEVICES INC. BA-5 FOR SMITH & WESSON SW99, 4006TSW, 4506TSW, 4566TSW, 5906TSW SERIES LASER FEATURES

LDI Patent #5581898

GSA

• Waterproof to 10 meters • No modification of the pistol is required • Quick-on and quick-off design allows the laser to be attached to the weapon as needed • Ambidextrous activation switch with positive ON/OFF • Mounting system allows laser to be installed and removed without realigning the laser • Low battery indicator light is red • Laser activation indicator light is yellow • External windage and elevation adjustments • Optional quick release 3 volt or 6 volt tactical flashlight mounts on laser housing • Optional Safariland or Bianchi tactical and duty holsters available BA-5 Laser on Smith and Wesson SW99 with optional 3 volt flashlight

Available with Daytime Super Power PointTM or Infrared (Law Enforcement and Military Only)

LDI PATENT #5581898

LASER SPECIFICATIONS ELECTRICAL SPECIFICATIONS Laser Type: Power Output: Wavelength: Beam Diameter: Range/Visibility:* Battery: Battery Life:

Laser diode Class IIIa <5mW 635nM (SPP), 835Nm (IR) 0.58 sq. cm @ 25 meters 450 meters (low light); 30 meters daytime 6 volt Duracell PX28L lithium 3 hours continuous

MECHANICAL SPECIFICATIONS Limited Warranty: Material: Weight: Height: Length: Width: Environment:

One year Anodized aircraft aluminum 6061T-6 3.2 oz.; 90.7 grams w/battery 1.8 in.; 4.5 cm 2.5 in.; 6.4 cm 1.2 in.; 2.9 cm (average) Waterproof to 10 meters

BA-5 Laser on Smith and Wesson 4566TSW

Specifications may change without notice (Range may vary depending on light conditions).

BA-5 LASERS FOR SW99, 4006TSW, 4506TSW, 4566TSW, 5906TSW - Supplied with alignment tool, battery, and engraved S&W logo. LASERS WITHOUT FLASHLIGHT ADAPTER RAIL BA-5 Smith & Wesson SW99 BA-5 Smith & Wesson 4006TSW, 4506TSW, 4566TSW, 5906TSW LASERS WITH FLASHLIGHT ADAPTER RAIL BA-5 Smith & Wesson SW99 BA-6 Smith & Wesson 4006TSW, 4506TSW, 4566TSW, 5906TSW

270

SPP 30307 30313

PART NO. IR 30308 30314

30310 30316

30330 30317

Head Office: 1-866-652-2877

TACTICAL LIGHTS – Supplied with Batteries and 1" Weaver Ring 3 Volt TL-2 with Toggle Switch and 1" Weaver Ring 3 Volt TL-2 with 3-Way (ON/0FF/Momentary) Toggle Switch and 1" Weaver Ring 6 Volt TL-2 with Toggle Switch and 1" Weaver Ring 6 Volt TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch and 1" Weaver Ring

PART NO. 21361 21036 21113 21307

HOLSTERS Safariland Standard UBL for SW99 Safariland Drop UBL for SW99 Bianchi Tactical for SW99 – Size 1 Bianchi Tactical for 4566TSW – Size 1 Bianchi Tactical Thigh for SW99 – Size 1 Bianchi Tactical Thigh for 4566TSW Size 1

Left 41198 41199 41127 41127 41121 41121

West: (604) 526-1631

Right 41195 41196 41124 41124 41117 41117

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS SIGHTS Laser Sights by LASER DEVICES INC. DUAL BEAM AIMING LASER LASER FEATURES • Waterproof to 20 meters • Rotary mode switch enables the user to instantly select between infrared and visible aiming lasers. Optional IR only unit available with IR laser and IR illuminator • Mounts on all standard Picatinny (NATO 1913) rails • Integrated top Picatinny rail offers a solid mounting point for red dot sights, holographic sights, military style scopes and LDI’s TL-2 tactical flashlight • External adjustments for windage and elevation in precise .4 milliradian increments • Windage and elevation knobs are protected from front and rear impact • Visible and infrared aiming lasers can be adjusted independently without the use of tools • Precision glass lens with LDI’s beam shaping technology produces a high quality, nearly round laser point at 100 meters • Positive ON/OFF/Kill rotary switch prevents accidental activation • Supplied with a remote cable and pressure pad switch • Manufactured in the USA

LASER SPECIFICATIONS Dual Beam Aiming Laser and IR Laser with ACOG

ELECTRICAL SPECIFICATIONS Laser Type: Laser diode Class IIIa Power Output: <5mW Wavelength: 635nM (SPP), 835nM (IR) Beam Diameter: 6.5mm @ 25 meters Range/Visiblity: *450 meters (low light); 30 meters daytime Battery: One 1.5 volt AA Battery Life: 5 hours continuous MECHANICAL SPECIFICATIONS Limited Warranty: One year Material: Anodized aircraft aluminum 6061T-6 Weight: 7.5 oz.; 212.6 grams w/battery Height: 1.1 in.; 2.7 cm Length: 2.8 in.; 7.1 cm (average) Width: 2.1 in.; 5.4 cm (average) Environment: Waterproof to 20 meters

LDI PATENT #5581898

GSA

Available with Daytime Super Power PointTM or Infrared (Law Enforcement and Military Only)

DUAL BEAM AIMING LASERS (DBAL) – Supplied with battery, remote pressure pad switch and waterproof carrying case. PART NO. PADDLE SWITCHES Momentary Pressure Switch, Right Angle Connector 6" Cable Momentary Pressure Switch, Right Angle Connector 8" Cable 40040 Momentary Pressure Switch, Right Angle Connector 10" Cable Momentary Pressure Switch, Straight Connector 6" Cable 40042 Momentary Pressure Switch, Straight Connector 8" Cable Momentary Pressure Switch, Straight Connector 10" Cable 40044 (Custom paddle switch cable lengths available)

LASERS Dual Beam Aiming laser with SPP (635nM) Visible Laser and Infrared (835nM) Laser Dual Beam Aiming Laser with Infrared (835nM) Aiming Laser and Infrared (835nM) Tactical Illuminator Dual Beam Aiming Laser High Power with Infrared (835nM) Aiming Laser and High Power (30mw) Infrared (835nM) Illuminator

Dual Beam Aiming Laser with TL-2 light and IR filter Standard with Daytime Super Power PointTM (635nM) (and Infrared 835 nM)

(Choose the cable length – straight connector only – for the pressure pad switch) LASER ACCESSORIES Daytime Glasses, High Efficiency Daytime Glasses, Standard Efficiency “Accur-Aim Laser” Target

30204 30203 30102

MOUNTS Picatinny/Weaver Mount for AK-47 Picatinny/Weaver Mount, Long, for .45" to .75" (11.4–19mm) Picatinny/Weaver Mount, Long, for .75" to 1" (19-25.4mm) Picatinny/Weaver Mount, Short, for .45" to .75" (11.4-19mm) Picatinny/Weaver Mount, Short, for .75" to 1" (19-25.4mm)

PART NO. 70710 70712 70713 70711 70714 70715

24568 24449 24453 24447 24448

DUAL BEAM AIMING LASER - INTELLIGENT (DBAL-I) LASER FEATURES

• • • • • • • • • • • • • •

Waterproof to 20 meters Rotary mode switch selects between IR pointer, IR illuminator and IR pointer combined with illuminator User can select from up to eight pulse rates from continuous ON to a combination of short and long pulses Low battery mode pulses the laser to indicate when it is time to replace the battery Low power eye-safe training mode reduces the IR pointer and IR illuminator power to Class I eye-safe level Supplied with NATO 1913 rail grabber with thumb screw Optional A.R.M.S. throw lever mount available Replaceable gradient filter caps can be used to project up to eight different laser beam patterns Optional filter cap cover reduces the laser pointer and illuminator output power to an eye-safe Class I level Windage and elevation adjusts in precise 0.4 milliradian clicks Precision glass lens produces a high quality, nearly round laser point Positive ON/OFF/Kill rotary switch prevents accidental activation Suppled with a remote cable and pressure pad switch Manufactured in the USA

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

GSA

East: 1-877-993-9968

Dual Beam Aiming Laser-Intelligent on M4 with S.I.R. system

LDI Patent No. 5,581,898

271

FIREARMS SIGHTS

Laser Sights by LASER DEVICES INC. DUAL BEAM AIMING LASER - INTELLIGENT (DBAL-I) - CONTINUED LASER SPECIFICATIONS ELECTRICAL SPECIFICATIONS Laser Type: Laser diode Class IIIb Power Output: <35 milliwatts max. Training Mode: Class I (less than 0.5 milliwatts) Wavelength: 835nM (IR) for pointer and illuminator Beam Diameter: 6.5mm @ 25 meters Range/Visibility:* 450 meters (low light) 30 meters daytime Battery: One 1.5 volt AA Battery Life: 5 hours continuous

DUAL BEAM AIMING LASER INTELLIGENT (DBAL-I) - Supplied with battery, straight connector with 6” remote cable and pressure pad switch and waterproof carrying case. LASERS Dual Beam Aiming Laser-Intelligent with A.R.M.S. Throw Lever Mount, SPP (635nM) Visible Aiming Laser & Infrared (835nM) Aiming Laser Dual Beam Aiming Laser-Intelligent with A.R.M.S. Throw Lever Mount, Infrared (835nM) Aiming Laser & Infrared (835nM) Illuminator Dual Beam Aiming Laser-Intelligent High Power w/A.R.M.S. Throw Lever Mount Infrared (835nM) Aiming Laser & High Power (30mW) Infrared (835nM) Illuminator Dual Beam Aiming Laser-Intelligent with SPP (635nM) Visible Aiming Laser & Infrared (825nM) Aiming Laser Dual Beam Aiming Laser-Intelligent with Infrared (835nM) Aiming Laser & Infrared (835nM) Illuminator Dual Beam Aiming Laser-Intelligent High Power with Infrared (835nM) Aiming Laser & High Power (30mW) Infrared (835nM) Illuminator

Left Side View DBAL-I

MECHANICAL SPECIFICATIONS Limited Warranty: One year Material: Anodized aircraft aluminum 6061T-6 Weight: 7.5 oz.; 212.6 grams with battery Height: 1.1 in.; 2.7 cm Length: 2.8 in.; 7.1 cm (average) Width: 2.1 in.; 5.4 cm (average) Environment: Waterproof to 20 meters Specifications may change without notice. *(Range may vary depending on light conditions).

Part No. 40083 40084 40085 40080 40081 40082

Only available to law enforcement and military agencies on an agency purchase order. Right Side View DBAL-I

ITAL AND OTAL AIMING LASERS LASER FEATURES • Waterproof to 20 meters • ITAL laser is designed to be mounted on flat top rifles, or on a barrel mounted rail. The laser is in line with the center of the barrel • OTAL laser is designed to be mounted behind the front sight. Laser is offset to project around the front sight • Compact size only 2.8 inches long • Minimizes the weight added to the front of the weapon • Windage and elevation are adjustable in precise 0.4 miliradian clicks • Windage and elevation knobs are protected from impact • Reduced laser signature • Complies with MIL-STD-810 • No tools necessary to adjust windage and elevation • Momentary pressure pad and positive ON/OFF rotary switch • Operates with a single AA battery

GSA

ITAL on M-4 Flat Top

LDI Patent #5,581,898

Supplied with daytime Super Power PointTM diode. Infrared diode available to Law Enforcement and Military Agencies only. LASER SPECIFICATIONS

ELECTRICAL SPECIFICATIONS Laser Type: Laser diode Class IIIa Power Output: <5mW Wavelength: 635nM (SPP), 835nM (IR) Beam Diameter: 6.5mm @ 25 meters Range/Visibility:* 450 meters (low light) 30 meters daytime Battery: One 1.5 volt AA Battery Life: 5 hours continuous

OTAL on M-4

272

LASERS ITAL with A.R.M.S. Throw Lever Mount OTAL with A.R.M.S. Throw Lever Mount ITAL Aiming Laser OTAL Aiming Laser

Part No. SPP IR 19004 19005 19105 19106 19001 19002 19101 19102

PADDLE SWITCHES Momentary Pressure Switch, Right Angle Connector 8” Cable Momentary Pressure Switch, Right Angle Connector 10” Cable Momentary Pressure Switch, Straight Connector 8” Cable

70712 70713 70714

Head Office: 1-866-652-2877

MECHANICAL SPECIFICATIONS Limited Warranty: One year Material: Anodized aircraft aluminum 6061T-6 Weight: 4.9 oz.; 138.9 grams with battery Height: .73 in.; 1.9 cm Length: 2.8 in.; 7.2 cm (average) Width: 1.4 in.; 3.6 cm (average) Environment: Waterproof to 20 meters Specifications may change without notice. *(Range may vary depending on light conditions).

MOUNTS Picatinny/Weaver Mount for AK-47 Picatinny/Weaver Mount, Long (3.36”), for .45” to .75” (11.4-19mm) Barrels Picatinny/Weaver Mount, Long, for .75” to 1” (19- 25.4mm) Barrels Picatinny/Weaver Mount, Short (2.23”), for .45” to .75” (11.4-19mm) Barrels Picatinny/Weaver Mount, Short, for .75” to 1” (19- 25.4mm) Barrels ACCESSORIES 1.5 Volt AA Battery for ITAL and OTAL Daytime Laser Viewing Glasses, Standard Efficiency

West: (604) 526-1631

Prairies: 1-866-652-2877

Part No. 24568 24449 24453 24447 24448

30115 30203

East: 1-877-993-9968

FIREARMS SIGHTS Laser Sights by LASER DEVICES INC. UNIVERSAL AR-2A FOR M-16, AR-15 AND M-4

• Waterproof to 10 meters • No modification of the weapon is required • Pressure pad switch provides momentary activation • Single AA battery provides up to 5 hours of activation • Laser will not obscure the open sight • Compact size and weight • Optional NATO Rail allows the user to attach a TL-2 tactical light to the AR-2A mount

• Laser mounts on front sight cage, not on the barrel • Windage and elevation is adjustable in precise 0.4 miliradian clicks

• Reduced laser signature • Complies with MIL-SPEC-810 environmental require-

Universal AR-2A Light and Laser

ments

• Manufactured in the USA

GSA

LDI PATENT #5581898

Available with Daytime Super Power PointTM or Infrared (Law Enforcement and Military Only) LASER SPECIFICATIONS ELECTRICAL SPECIFICATIONS Laser Type: Power Output: Wavelength: Beam Diameter: Range/Visibility:* Battery: Battery Life:

Laser diode Class IIIa <5mW 635nM (SPP) or 835nM (IR) 0.58 sq. cm @ 25 meters 450 meters (low light) 30 meters daytime One AA 3 hours continuous

Universal AR-2A Laser

MECHANICAL SPECIFICATIONS Limited Warranty: Material: Weight: Height: Length: Width: Environment:

One year Anodized aircraft aluminum 6061T-6 2.4 oz.; 68 grams with battery 1.4 in.; 3.6 cm 4.6 in.; 11.6 cm (average) .73 in.; 1.9 cm (average) Waterproof to 10 meters

UNIVERSAL AR-2A LASERS FOR M-16, AR-15 AND M-4 FROM ARMALITE, BUSHMASTER, COLT, DPMC, AND OLYMPIC ARMS – Supplied with battery and mounting hardware.

Specifications my change without notice. *(Range may vary depending on light conditions.)

LASERS Universal AR-2A for M-16 and AR-15 Universal AR-2A for M-4

PART NO. SPP IR 16027 27261 24431 24432

MOUNTS AR-2 TL-2 Light Mount Only AR-2 Mount for Laser Sight Only AR-2 Mount for Laser Sight and Tactical Flashlight Adapter

PART NO 21299 24457 24458

LASERS WITH TACTICAL LIGHT MOUNT Universal AR-2A for M-16 And AR-15 Universal AR-2A for M-4

24400 24428

TACTICAL LIGHTS 6 Volt TL-2 with Toggle Switch and 1" Weaver Ring 6 Volt TL-2 with Straight Wire Paddle Switch and 1" Weaver Ring 6 Volt TL-2 with Coil Wire Paddle Switch and 1" Weaver Ring

21113 21114 21115

24402 24429

FACT

Laser Devices, Inc. (LDI) was the world’s first company to design and market aiming lasers for firearms. Founded in 1979 by Heinz Thummel, an internationally recognized expert in the design of visible and infrared laser systems, LDI is now known for its expertise in the design and manufacture of

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

state-of-the-art visible and infrared laser based aiming devices and tactical illumination systems and small arms training units used by law enforcement and military units around the world. The Company has been granted six (6) U.S. patents for it aiming laser designs.

East: 1-877-993-9968

273

FIREARMS SIGHTS Laser Sights by LASER DEVICES INC. MR-2 LASER

• Waterproof to 10 meters • NATO base allows the MR-2 to be attached to a wide variety of weapons • Optional mounting rails available for most weapons • Compact and lightweight design • External tactile click windage and elevation adjustable in 0.4 miliradian clicks • No tools necessary to adjust windage and elevation • Standard momentary remote with pressure pad switch • Optional toggle switch with positive ON/OFF • Reduced laser signature • Complies with MIL-STD-810 • Manufactured in the USA

GSA MR-2 as shown on ASK-47 with Picatinny rail system

LASER SPECIFICATIONS ELECTRICAL SPECIFICATIONS Laser Type: Power Output: Wavelength: Beam Diameter: Range/Visibility:* Battery: Battery Life:

Laser diode Class IIIa <5mW 635nM (SPP) or 835nM (IR) 0.58 sq. cm @ 25 meters 450 meters (low light) 30 meters daytime One 3 volt DL 123A battery 24 hours continuous

Available with Daytime Super Power PointTM or Infrared (Law Enforcement and Military Only)

MECHANICAL SPECIFICATIONS Limited Warranty: Material: Weight: Height: Length: Width: Environment:

One year Anodized aircraft aluminum 6061T-6 6.3 oz.; 179 grams w/battery 1.3 in.; 3.3 cm 3.9 in.; 9.9 cm (average) 1.1 in.; 2.8 cm (average) Waterproof to 10 meters

Specifications may change without notice. *(Range may vary depending on light conditions.)

MR-2 ON AN M-4

LDI PATENT #5581898

LASERS MR-2 with Toggle Switch MR-2 with Straight Wire Paddle Switch MR-2 with Coil Wire Paddle Switch

PART NO. SPP IR 16089 18002 16086 18021 16090 18003

MOUNTS Picatinny/Weaver Mount for AK-47 Picatinny/Weaver Mount, Long, for .45" to .75 (11.4 – 19mm)

274

PART NO. 24568 24449

TACTICAL SWITCHES End Cap with Toggle Switch End Cap with Straight Wire Remote Cable & Cable 2.5" Paddle Switch End Cap with Coil Wire Remote Cable & 2.5" Paddle Switch

PART NO. 30120 30167 30137

LASER ACCESSORIES Daytime Glasses, High Efficiency Daytime Glasses, Standard Efficiency

30204 30203

“Accur-Aim Laser” Target

30102

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS SIGHTS Laser Sights by LASER DEVICES INC. MP5 AND G3 DUAL BEAM AIMING LASERS LASER FEATURES • Waterproof to 20 meters • Toggle switch allows the user to switch instantly between a visible and an IR aiming laser • IR and visible lasers are aligned for windage and elevation using the same external adjustment mechanism • Optional IR aiming laser combined with IR illuminator available • Standard paddle switch with remote cable offers momentary activation • Heavy duty stainless steel housing • No modification to the MP5 is required • Kill switch prevents accidental activation • External windage and elevation adjustments • Aiming lasers have a low parallax to the sight • Complies with MIL-STD-810F • Optional tactical light foregrip available • Manufactured in the USA

Dual Beam Laser with Light on HK MP5

GSA

VISIBLE AND IR AIMING LASERS FOLLOW THE SAME OPTICAL PATH TO THE TARGET

LDI PATENT #5581898

LASER SPECIFICATIONS ELECTRICAL SPECIFICATIONS Laser Type:

Laser diode Class IIIb FDA Std. IEC 825-1 (Class I to Class 1M available) <5mW visible; 0.7mW to 2.5mW IR <20mW for the optional IR illuminator 635nM (SPP) and 835nM (IR) 0.58 sq. cm @ 25 meters 450 meters (low light) 30 meters daytime 6 volt Duracell PX28L lithium 1.5 hours continuous

Power Output: Wavelength: Beam Diameter: Range/Visibility:* Battery: Battery Life:

DUAL BEAM MP5 AVAILABLE TO LAW ENFORCEMENT AND MILITARY AGENCIES ONLY

MECHANICAL SPECIFICATIONS Limited Warranty: Material: Weight: Height: Length: Width: Environment:

One year Stainless steel with black oxide housing 4.126 oz.; 117.0 grams with battery 0.95 in.; 24.13 mm 1.61 in.; 40.89 mm (average) 1.187 in.; 30.14 mm (average) Waterproof to 20 meters Specifications may change without notice.*(Range may vary depending on light conditions).

MP5 DUAL BEAM AIMING LASERS FOR HECKLER & KOCH MP5, 53, 31, 91 AND 94 - Supplied with pressure pad switch, battery and alignment tool. LASERS

PART NO.

OPTIONAL ACCESSORIES

PART NO.

Dual Beam MP5 with Super Power Point (635nM) and Infrared (835nM) Aiming Lasers Dual Beam MP5 with Infrared (835nM) Aiming Laser and Infrared (835nM) Illuminator Dual Beam MP5 High Power with Infrared (835nM) Aiming

40045

6-volt Lithium Battery (PX28L) for Dual Beam MP5 Daytime Glasses, High Efficiency (for visible laser only) Daytime Glasses, Standard Efficiency (for visible laser only) Accur-Aim Laser® Target

30108 30204 30203 30102

Head Office: 1-866-652-2877

West: (604) 526-1631

40046 40047

Prairies: 1-866-652-2877

East: 1-877-993-9968

275

FIREARMS SIGHTS

Laser Sights by LASER DEVICES INC. MULTI-OPERATIONAL LASER AIMING DEVICE (MOLAD) STANDARD FEATURES • Waterproof to 20 meters • Rotary mode switch instantly selects the following functions: • Off (Kill) keeps unit from being activated, • Tactical light only, • Visible aiming laser with tactical light, or • Visible aiming laser only • Infrared/visible toggle allows the MOLAD unit to be instantly switched between visible and infrared wavelengths • Infrared functions include: • Off (Kill) keeps unit from being activated, • Infrared LED illuminator, • Infrared aiming laser with IR illuminator, or • Infrared aiming laser only • Quickly attaches to the weapon using a built-in mounting bracket • MOLAD offers a red low battery indicator light and a yellow activation light located behind the toggle switch • Toggle switch activation located on each side of the trigger guard • Remote cable port can be configured with: • Pressure pad switch, • Hogue grip switch, or • Button Switch • Supplied with a black nylon belt pouch

MOLAD on Beretta

LDI PATENT #5581898

AVAILABLE FOR: • Glock • Walther P99 • HK USP, HK USP Compact, and HK P2000 • SW 99 AND TSW Series • Springfield TRP, MIL-Spec and XD • New SIG P226 and SIG P220ST • Beretta VERTEC • IMI Barak and Jericho

• ALSO FITS NATO 1913 RAIL

GSA

FLASHLIGHT FEATURES • Powerful 6 volt tactical light produces a blinding 95 lumens • Two 3 volt batteries provide one hour of continuous operation • High pressure xenon lamp produces a bright white light • Tactical light can be focused or defocused by the user • Optional Red and IR tip-off filters available

LASER FEATURES • IR and visible aiming lasers are parallel and follow the same optical path to the target • IR and visible lasers are aligned using the same external adjustment mechanism • Aiming lasers have a low parallax to the sight an dare located directly below the barrel • MOLAD can be removed and replaced on weapon without realigning the windagte and elevation • Supplied with daytime visible Super Power Point (635nM) diode and Infrared (835nM) diode

IR ILLUMINATOR FEATURES • LED IR Illuminator provides supplemental illumination for use with night vision goggles • 20 lumen LED will light up 10 x 10 meter room

276

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS SIGHTS

Laser Sights by LASER DEVICES INC. MULTI-OPERATIONAL LASER AIMING DEVICE (MOLAD) - continued SPECIFICATIONS

MOLAD Available to Law Enforcement and Military Agencies Only

LASER SPECIFICATIONS Laser Type: Laser diode Class IIIb FDA Std. IEC 825-1 (Class 1 to Class 1M) Power Output: <mW (635nM) and <5mW (835nM) Wavelength: 635nM (SPP) and 835nM (IR) Beam Diameter: 6.5mm @ 25 meters Range/Visibility:* 450 meters low light (635nM) 30 meters daytime 300 meters IR (835nM) Battery: Lithium 2x3 Volt 123A Battery Life: 24 hours continuous, depending on optical output FLASHLIGHT SPECIFICATIONS Light Output: 95 lumens for 6 Volt Bulb Type: High pressure xenon Battery Life: 1 hour, depending upon temperature MECHANICAL SPECIFICATIONS Limited Warranty: One year Material: Specially formulated polymer Weight: 204 grams; 7.2 oz. (w/batteries; w/o mount) Height: 47.00 mm; 1.85 in. Length: 101.50 mm; 3.99 in. Width: 39.50 mm; 1.55 in. Diameter of Head: 32.00 mm; 1.24 in. Environment: Waterproof to 20 meters

Visible Aiming Laser Elevation Adjustment IR Illumination

MOLAD on M-4

NATO 1913 Rail Grabber

IR Aiming Laser

Battery Compartment Latches

MOLAD Belt Pouch

Low Battery Light

Tactical Light Head

Windage Adjustment

CorduraTM Nylon

Activation Light

Remote Cable Port

Rotary Mode Switch Off (Kill) Tactical Light Only Tactical Light and Laser Laser Only

On/Off Toggle Switch

Remote Cable with Pressure Pad Switch

Windage and Elevation Tool

Visible / IR Selector Switch

Pouch Holds Four Spare 123A Batteries

Velcro Fastener

MULTI-OPERATIONAL LASER AIMING DEVICE (MOLAD) for HK USP, HK USP Compact, HK P2000, Glocks with rail, Wlather P99, SIG P226 and P220st, Smith & Wesson 99 and TSW, Springfiled TRP Operator, MIL-SPEC Operator and XD, and Beretta 92/96 VERTEC pistols. MOLAD features a low battery indicator light and activation indicator. Each unit is supplied with batteries and alignment too. (Military and Law Enforcement only.) MOLAD MOLAD for PICATINNY 1913 Style Rails with Open Front MOLAD Laser and Light for HK USP MOLAD Laser and Light for HK USP Compact MOLAD Laser and Light for HK P2000 MOLAD Laser and Light for Glock 17, 19, 20, 21, 22, 23, 31, 32, 34, 35 MOLAD Laser and Light for Walther P99 MOLAD Laser and Light for New SIG P266 and P220ST MOLAD Laser and Light for Springfield TRP Operator and MIL-SPEC Operator MOLAD Laser and Light for Beretta 92/96 VERTEC MOLAD Laser and Light for Smith & Wesson 99 and TSW MOLAD Laser and Light for NEW IMI Barak and Jericho

Head Office: 1-866-652-2877

West: (604) 526-1631

PART NO. 210072 210050 210052 210054

OPTIONAL ACCESSORIES Optional Remote Cable with Right Angle Connector and Pressure Pad Switch (specify pistol) Optional Remote Cable with Right Angle Connector and Button Switch Rail Adaptor for Beretta

210056 210058 210060

Red Filter, 3 volt / 6 volt TL-2 Infrared Filter, 3 volt / 6 volt TL-2

210062 210064 210066 210068

Prairies: 1-866-652-2877

HOLSTERS Bianchi Tactical Holster – Size 1 Bianchi Tactical Holster – Size 2 Bianchi Tactical Thigh Holster – Size 1 Bianchi Tactical Thigh Holster – Size 2

East: 1-877-993-9968

RIGHT 41124 41125 41117 41118

PART NO. 2210141 2210143 92/96 69009 39997 39998 LEFT 41127 41128 41121 41122

277

FIREARMS SIGHTS

Laser Sights by LASER DEVICES INC. BRIGHT LIGHT AIMING SYSTEM TACTICAL (BLAST) STANDARD FEATURES • Waterproof to 20 meters • Rotary mode switch is used to select between the following functions: • Off (Kill) switch keeps the unit from being activated by accident • Aiming laser only • Tactical light and laser together • Tactical light only • BLAST can be quickly attached to and detached from the weapon • A red low battery light located just inside the trigger guard warns the user when it is time to change the battery • A yellow activation light tells the user that the BLAST unit is on • Dual toggle switches are located on each side of the trigger guard • A built-in remote cable connector port allows BLAST to be equipped with a: • Pressure pad switch • Hogue grip and switch, or • Button switch • Optional CorduraTM nylon BLAST belt pouch with spare battery storage is available • Bianchi military style holsters available • Manufactured in the USA

BLAST on HK USP

LASER FEATURES • BLAST can be removed and replaced on the weapon without having to realign the windage and elevation • External windage and elevation adjustments • Supplied standard with a daytime visible Super Power Point (635nM) diode • Laser offers a very low parallax to the sight • Laser point is directly in line with the barrel of the weapon • Optional IR (835nM) diode available to military and law enforcement agencies only FLASHLIGHT FEATURES • Powerful 6 volt light produces 95 lumens • One hour of continuous operation on each set of batteries • Light beam can be focused to a point or defocused to illuminate a wider area • Batteries can be replaced without disassembling the light or removing it from the weapon • High pressure xenon bulb emits a bright white light

Supplied with daytime Super Power PointTM diode. Infrared diode available to Law Enforcement and Military Agencies only.

LDI PATENT #5581898

BLAST on VERTEC SPECIFICATIONS LASER SPECIFICATIONS Laser Type: Laser diode Class IIIa (IIIb for IR) Power Output: <5mW Wavelength: 635nM (SPP) or 835nM (IR) Beam Diameter: 0.58 sq. cm @ 25 meters Range/Visibility:* 450 meters (low light) 30 meters daytime Battery: Lithium 2 x 3 volt DL123A Battery Life: 48 hours continuous

GSA

AVAILABLE FOR • Glock • Walther P99 • HK USP, HK USP • Compact and HK P2000 • SW99 and TSW Series • IMI Barak and Jericho

278

• Springfield TRP, MIL-Spec and XD • New SIG P226 and SIG P220ST • Beretta VERTEC and 92/96 with adaptor rail • Also Fits NATO 1913 and Picatinny Rail systems

Head Office: 1-866-652-2877

West: (604) 526-1631

FLASHLIGHT SPECIFICATIONS Light Output: 95 lumens for 6 volt Bulb Type: High pressure xenon Battery Life: 1 hour (depending upon temp.) Battery Type: Lithium 2 x 3 volt 123A MECHANICAL SPECIFICATIONS Limited Warranty: One year Material: High impact polymer Weight with Batteries: 209 grams; 7.4 oz. Height: 49.55 mm; 1.95 in. Length: 101.40 mm; 3.99 in. Width: 39.00 mm; 1.53 in. Diameter of Head: 30.00 mm; 1.18 in. Environment: Waterproof to 20 meters Specifications may change without notice. *(Range may vary depending on light conditions.)

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS SIGHTS

Laser Sights by LASER DEVICES INC. BRIGHT LIGHT AIMING SYSTEM TACTICAL (BLAST) - continued

FACT

LDI products are frequently used in less than ideal conditions, such as desert heat, alpine cold, high humidity and temperatures found in tropical rain forests. LDI's aiming lasers feature powerful Super Power PointTM daytime visible and infrared diodes that produce the brightest red laser point allowed by law. External windage and elevation mechanisms provide pinpoint accuracy and stay aligned while firing magazine after magazine of military grade ammunition.

Elevation Adjustment Aiming Laser

NATO 1913 Rail Grabber

Tactical Light Head

Windage Adjustment

OPTIONAL BELT POUCH

Activation Light Low Battery Light

CorduraTM Nylon

On/Off Toggle Switch

Battery Compartment Battery Compartment Latches

Remote Cable Windage and Elevation Tool Port

BRIGHT LIGHT AIMING SYSTEM TACTICAL (BLAST) for HK USP, HK USP Compact, HK P2000, Glocks with rail, Walther P99, NEW SIG P226 and P220ST, Springfield TRP Operator, MIL-SPEC Operator and XD, Beretta 92/96 VERTEC, Smith & Wesson 99 and TSW Series, and NEW IMI Barak & Jericho pistols. LASERS BLAST Laser & Light for Picatinny/NATO 1913 Rails with Open Front BLAST Laser & Light for HK USP BLAST Laser & Light for HK USP Compact BLAST Laser & Light for HK P2000 BLAST Laser & Light for Glock 17, 19, 20, 21, 22, 23, 31, 32, 34, 35 BLAST Laser & Light for Walther P99 BLAST Laser & Light for NEW SIG P226 and P220ST BLAST Laser & Light for Springfield TRP Operator & MIL-SPEC BLAST Laser & Light for Beretta 92/96 VERTEC BLAST Laser & Light for Smith & Wesson 99 & TSW BLAST Laser & Light for NEW IMI Barak & Jericho

Head Office: 1-866-652-2877

West: (604) 526-1631

PART NO. SPP IR 210020 221502 210000 210002 210004 210016

210001 210003 210005 210017

210006 210008 210010 210012 210014 210018

210007 210009 210011 210013 210015 210019

Prairies: 1-866-652-2877

Rotary Mode Switch • Off (Kill) • Tactical Light Only • Tactical Light and Laser • Laser Only

Remote Cable with Pressure Pad Switch Pouch Holds Four Spare 123A Batteries

Velcro Fastener

BATTERIES 6 Volt Lithium Battery (2 x DL 123A)

PART NO. 30170

OPTIONAL ACCESSORIES – (SPECIFY PISTOL) Optional Remote Cable with Right Angle Connector and Pressure Pad Switch Optional Remote Cable with Right Angle Connector and Button Switch Rail Adapter for Beretta 92/96

2210141 2210143 69009

LASER ACCESSORIES Daytime Glasses, High Efficiency Daytime Glasses, Standard Efficiency “Accur-Aim Laser” Target

30204 30203 30102

HOLSTERS Bianchi Tactical Holster – Size 1 Bianchi Tactical Holster – Size 2 Bianchi Tactical Thigh Holster – Size 1 Bianchi Tactical Thigh Holster – Size 2 Nylon Pouch for BLAST

RIGHT LEFT 41124 41127 41125 41128 41117 41121 41118 41122 No. L09151

East: 1-877-993-9968

279

FIREARMS SIGHTS Laser Sights by LASER DEVICES INC. UNIVERSAL LAS/TAC SYSTEM

STANDARD FEATURES • Waterproof to 20 meters • The Universal Las/Tac system can be quickly attached and detached from the weapon • Dual toggle switches are located on each side of the trigger guard • A built-in remote cable connector port enables the Las/Tac unit to be equipped with a: - Pressure pad switch - Hogue grip switch, or - Tactical button switch • A red low battery indicator light located just inside the trigger guard warns the user when it is time to change batteries • A yellow activation light informs the user when the Las/Tac unit is activated • Optional remote cable with pressure pad switch available • Holsters and accessory pouches available for laser and tactical light LASER FEATURES • Aiming laser can be removed and replaced without having to realign the windage and elevation • External windage and elevation adjustments • Supplied with a daytime Super Power PiontTM visible laser module • Laser point has a low parallax and is in line with the barrel of the weapon • Operates for 489 hours continuously on a single set of lithium batteries • An optional IR (835nM) diode is available to law enforcement and military units • The aiming laser module can be exchanged with the optional 6 volt tactical flashlight head

Available with Daytime Super Power PointTM or Infrared (Law Enforcement and Military Only)

Universal LAS/TAC Light on HK USP

Universal LAS/TAC Light on Beretta VERTEC

UNIVERSAL LAS/TAC SPECIFICATIONS LASER SPECIFICATIONS Laser Type: Laser diode Class III (IIIb for IR) Power Output: <5mW Wavelength: 635 nM (SPP) or 835nM (IR) Beam Diameter: 0.58 sq. cm @ 25 meters Range/Visibility:* 450 meters (low light) 30 meters daytime Battery: Lithium 2 x 3 volt DL123A Battery Life: 48 hours continuous FLASHLIGHT SPECIFICATIONS Light Output: 95 lumens for 6 volt Bulb Type: High pressure xenon Battery Life: 1 hour (depending upon temp.) Battery Type: Lithium 2 x 3-volt 123A MECHANICAL SPECIFICATIONS Limited Warranty: One year Material: High impact polymer Weight w/ Batteries: 4.8 ox.; 136.1 grams Height: 1.6 in.; 4.1 cm Length: 4.6 in.; 11.7 cm Width: 1.5 in.; 3.9 cm Diameter of Head: 1.25 in.; 3.2 cm Environment: Waterproof to 20 meters Specifications may change without notice. *(Range may vary depending on light conditions.)

280

GSA

Universal LAS/TAC Laser on Glock 22

LDI PATENT #5581898

Universal LAS/TAC Laser on Walther P99

UNIVERSAL LAS/TAC LASERS FOR HK USP, HK USP Compact, HK P2000, Walther P99, Glocks with rail, Smith & Wesson 99 and TSW pistols, Beretta 92/96 VERTEC, Springfield TRP Operator, MIL-SPEC Operator & XD, NEW SIG P226 and NEW IMI Barak & Jericho. Each unit is supplied with batteries and alignment tool. PART NO. LASERS SPP IR Universal Las/Tac for Picatinny/NATO 1913 Rails with Open Front 221013 221012 Universal Las/Tac for Walther P99 221020 221021 Universal Las/Tac for Heckler & Koch USP 210126 210127 Universal Las/Tac for Heckler & Koch USP Compact 210129 210130 Universal Las/Tac for Heckler & Koch P2000 210132 210133 Universal Las/Tac for Glock 17, 19, 20, 21, 23, 31, 32, 34, 35 221017 221018 Universal Las/Tac for Smith & Wesson 99 and TSW Series 210123 210124 Universal Las/Tac for Beretta 92/96 VERTEC 221006 221007 Universal Las/Tac for Springfield TRP Operator, MIL-SPEC Operator &XD 210135 210136 Universal Las/Tac for NEW SIG P226 (with Accessory Rail) 210138 210139 Universal Las/Tac for NEW IMI Barak & Jericho (with Accessory Rail) 210141 210142 OPTIONAL ACCESSORIES – (SPECIFY PISTOL) Optional Remote Cable with Pressure Pad Switch Optional Remote Cable with Straight Connector and Button Switch Rail Adapter for Beretta 92/96 Rail Adapter for Classic SIG 220, 226, 228, 229

PART NO. 221100 2210142 69009 69010

LASER ACCESSORIES Daytime Glasses, High Efficiency Daytime Glasses, Standard Efficiency “Accur-Aim Laser” Target

30204 30203 30102

UNIVERSAL LAS/TAC LIGHTS for HK USP, HK USP Compact, HK P2000, Walther P99, Glocks with rail, Smith & Wesson 99 and TSW pistols, Beretta 92/96 VERTEC, Springfield TRP Operator, MIL-SPEC Operator & XD, NEW SIG P226 and NEW IMI Barak & Jericho. Each unit is supplied with batteries.

Universal LAS/TA Light on M-4 style rifle AVAILABLE FOR • Glock • Walther P99 • HK USP, HK USP Compact, and HK P2000 • SW 99 and TSW Series • Springfield TRP, MIL-Spec and XD • New SIG P226 and P220ST • Beretta VERTEC • IMI Barak and Jericho • ALSO FITS NATO 1913 RAIL

Head Office: 1-866-652-2877

LIGHTS Universal Las/Tac for Picatinny/NATO 1913 Rails with Open Front Universal Las/Tac for Walther P99 Universal Las/Tac for Heckler & Koch USP Universal Las/Tac for Heckler & Koch USP Compact Universal Las/Tac for Heckler & Koch P2000 Universal Las/Tac for Glock 17, 19, 20, 21, 22, 23, 31, 32, 34, 35 Universal Las/Tac for Smith & Wesson 99 and TSW Series Universal Las/Tac for Beretta 92/96 VERTEC Universal Las/Tac for Springfield TRP Operator, MIL-SPEC Operator and XD Universal Las/Tac for NEW SIG P226 (with Accessory Rail) Universal Las/Tac for NEW IMI Barak & Jericho (with Accessory Rail)

PART NO. 221014 221019 210125 210128 210131 221016 221022 221005 210134 210137 221103

BATTERIES 6-Volt Lithium Battery (2 x DL 123A)

PART NO. 30170

SPARE LAMP ASSEMBLY 6 Volt Bulb Assembly

5019

HOLSTERS (SPECIFY PISTOL) Bianchi Tactical Holster – Size 1 Bianchi Tactical Holster – Size 2 Bianchi Tactical Thigh Holster – Size 1 Bianchi Tactical Thigh Holster – Size 2

RIGHT 41124 41125 41117 41118

West: (604) 526-1631

Prairies: 1-866-652-2877

LEFT 41127 41128 41121 41122

East: 1-877-993-9968

FIREARMS SIGHTS Laser Sights by LASER DEVICES INC. LAS/TAC 2 LASER OR TACTICAL LIGHT SYSTEM STANDARD FEATURES • Waterproof to 20 meters • LAS/TAC 2 quickly attaches to the weapon • True ambidextrous switching works the same way for both right and left-handed shooters • Safariland duty holsters available • Pouches and Blackhawk belt carriers available • Manufactured in the USA LASER FEATURES • LAS/TAC 2 can be attached and removed from the firearm without having to realign the windage and elevation • External windage and elevation adjustments • Standard with Super Power PointTM (635nM) laser--the brightest laser allowed by law! • Laser operates for more than 48 hours on a single set of batteries • Optional Infrared (835nM) diode available to law enforcement and military units only • Laser module can be exchanged with the optional 6 volt tactical flashlight head

LAS/TAC 2 xenon light on NEW Walther P99

FLASHLIGHT FEATURES • Powerful 6 volt light produces 95 lumens • One hour of continuous operation on each set of lithium batteries • High pressure xenon bulb emits a bright white light • Beam can be focused to a point or defocused to illuminate a wider area • Optional full sized OPERATOR™ flashlight head is available for long-range applications • Optional laser module allows the user to replace the flashlight head with an aiming laser module • Optional LED high intensity flashlight head available • Shock absorbing flashlight head design protects the lamp from recoil shock induced failure

GSA LDI PATENT NO. 5,581,898 SUPPLIED WITH DAYTIME SUPER POWER POINTTM DIODE. INFRARED DIODE AVAILABLE TO LAW ENFORCEMENT AND MILITARY AGENCIES ONLY.

STANDARD MOUNTING BRACKET FITS MOST RAIL EQUIPPED PISTOLS

LAS/TAC 2 laser

LASERS LAS/TAC 2 with A.R.M.S. Throw Lever Mount LAS/TAC 2 for Picatinny/NATO 1913 Rails with Open Front LAS/TAC 2 Laser for Pistols with Standard Accessory Rail Fits the following pistols: HK P2000US NEW Walther P99 Glock 17, 19, 20, 21, 22, 23, 31, 32, 34 & 35 Smith & Wesson 99 & TSW Series New CZ TT Taurus 24/7 STI Duty One & Tactical Steyr M-A1 High Standard

Head Office: 1-866-652-2877

West: (604) 526-1631

LAS/TAC 2 high intensity LED light

Part No. SPP 22000 22002

IR 22001 22003

22012

22013

Prairies: 1-866-652-2877

LASERS (cont’d) LAS/TAC 2 Laser for Pistols with NATO 1913/Picatinny Rails. Fits the following pistols: SIG P226ST and P220ST SIG SP2022 and GSR 1911 Beretta 92/96 VERTEC FN Five-seveN Springfield TRP Operator, MIL-SPEC Operator and XD Kimber TLE RLII & Gold Combat RL-2 IMI Barak, Jericho and SP21 LAS/TAC 2 Lasers for Pistols with Proprietary Rails LAS/TAC 2 for HK USP LAS/TAC 2 for HK USP Compact LAS/TAC 2 for HK 2000GPM LAS/TAC 2 for Classic Walther P99

East: 1-877-993-9968

Part No. SPP 22012

IR 22013

22006 22008 22010 22004

22007 22009 22011 22005

281

FIREARMS SIGHTS

Laser Sights by LASER DEVICES INC. CLASSIC LAS/TAC LASERS AND LIGHTS FOR SIG P220, 226, 228/229, HK MARK 23, UZI SUBMACHINE GUNS AND MP5SD STANDARD FEATURES • Waterproof to 30 meters • No modification to the weapon is required • Ambidextrous activation switch with positive ON/OFF • Optional remote switch with pressure pad, Hogue grip or tactical thumb switch • Duty and tactical thigh holsters available • Design allows the user to exchange the laser module with a tactical light head • Manufactured in the USA

LAS/TAC Light on SIG 220

FLASHLIGHT FEATURES • Select between a 3 volt or 6 volt tactical light • One hour of continuous bright illumination on each set of batteries • High pressure xenon bulb emits a bright white light • Beam can be focused from spot to flood LASER FEATURES • Supplied with a Super Power Point daytime visible diode for maximum visibility • External windage and elevation adjustments • Laser can be removed and replaced without having to realign the windage and elevation • Twenty four hours of continuous operation using a single 3-volt lithium battery

GSA

LDI PATENT #5581898

Universal LAS/TAC Laser on Mark 23 SOCOM

SPECIFICATIONS FOR LAS/TAC LASER SPECIFICATIONS Laser Type: Laser diode Class IIIa Power Output: <5mW Wavelength: 635nM (SPP) or 835nM (IR) Beam Diameter: 0.58 sq. cm @ 25 meters Range/Visibility:* 450 meters (low light) 30 meters day Battery: 1 x 3 volt DL123A lithium Battery Life: 24 hours continuous FLASHLIGHT SPECIFICATIONS Light Output: 25 lumens 3-vold & 95 lumens 6-volt Bulb Type: High pressure Xenon Battery: 2 x 3 volt DL123A Lithium Battery Life: 1 hour (depending upon temperature) Diameter of Head: 1.3 in.; 3.2 cm MECHANICAL SPECIFICATIONS Limited Warranty: One year Material: Anodized aircraft aluminum 6061T-6 Weight: 4.6 oz.; 130 grams w/battery, 6 volt Length: 5.4 in.; 13.8 cm (average), 6 volt Width: 1.0 in.; 2.5 cm (average) Height: 1.8 in.; 4.6 cm (average), 6 volt Environment: Waterproof to 30 meters Specifications may change without notice. *(Range may vary depending on light conditions.)

282

LAS/TAC LASERS – SIG Las/Tac for SIG P220 with Slide Switch Las/Tac for SIG P226 with Slide Switch Las/Tac for SIG P228/229 with Slide Switch Las/Tac for SIG P220 with Slide Hogue Switch & Hogue Grip Las/Tac for SIG P226 with Slide Hogue Switch & Hogue Grip Las/Tac for SIG P228/229 with Slide Hogue Switch & Hogue Grip Las/Tac for SIG P220 with Slide and Paddle Switch and 2 Rubber Strips Las/Tac for SIG P226 with Slide and Paddle Switch and 2 Rubber Strips Las/Tac for SIG P228/229 with Slide and Paddle Switch and 2 Rubber Strips

PART NO. SPP 21396 21397 21398 221395 221396 221397 221426 221427 221428

LAS/TAC LASERS – HK MARK 23 (SOCOM) Las/Tac for HK Mark 23 with Slide Switch 221437 Las/Tac for HK Mark 23 with Slide and Paddle Switch and 2 Rubber Strips 221481 Las/Tac for HK Mark 23 with Slide/Hogue Switch and Hogue Grip 2 Rubber Strips 221478 LAS/TAC TACTICAL LIGHTS – HK MARK 23 (SOCOM) Las/Tac 6 Volt Light for HK Mark 23 with Slide Switch Las/Tac 6 Volt Light for HK Mark 23 with Slide/Hogue Switch and Hogue Grip Las/Tac 6 Volt Light for HK Mark 23 with Slide, Paddle Switch and 2 Rubber Strips

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

IR 221429 221430 221431 221432 221433 221434 221419 221420 221421 221438 221482 221479

221483 221484 221485

East: 1-877-993-9968

FIREARMS SIGHTS

Laser Sights by LASER DEVICES INC. CLASSIC LAS/TAC LASERS FOR SIG P220, 226, 228/229, HK MARK 23, UZI WITH BAYONET LUG, MP5SD AND SHOTGUNS MODULAR COMPONENTS (Laser/Tactical Light Systems)

LAS/TAC LASERS, LIGHTS AND MOUNTS FOR UZI, M-16, MP5SD AND SHOTGUNS - Lasers and Lights supplied with batteries. 6 Volt Battery Housing

6 Volt Bulb Assembly

Red Filter

2 x 3 Volt Lithium Battery Laser/LIght Housing w/Slide Switch

Reflector Assembly Infrared Filter

3 Volt Battery Housing

3 Volt Bulb Assembly

Laser/LIght Housing w/Slide Switch & Hogue Grip Switch

3 Volt Battery Housing

Las/Tac Laser on Mark 23 (SOCOM)

3 Volt Lithium Battery

Laser/Light Housing w/Slide Switch & Button Switch

Laser Housing Laser/Light Housing w/Slide Switch & Button Switch

New Dual Beam Laser Housing offers both visible and infrared lasers or an infrared pointer with infrared illuminator. Call for details.

ON Toggle with Straight Wire Paddle Switch Housing ON/OFF (Kill) Toggle with Straight Wire Paddle Switch Housing

Las/Tac Dual Beam Housing

Paddle Switch Housing w/” Straight Wire Paddle Switch Housing w/” Coil Wire MP5SD MOUNTS

Dual Ring Mount Dual Ring Mount

Las/Tac Lser on SIG 226

Button Switch Housing RING MOUNTS FOR NATO, PICATINNEY AND WEAVER RAIL

Single Ring Mount

ON/OFF Momentary Toggle Switch Housing ON/OFF Toggle Switch Housing

Single Ring Mount Weaver Ring

Las/Tac TL-2 Light on M-4 Rifle

MIL-SPEC NATO 1913 Picatinny

LAS/TAC SHOTGUN MOUNTS

LAS/TAC LASERS - UZI (Requires Bayonet Lug) Las/Tac for UZI with Slide Switch Las/Tac for UZI with Slide Switch and Paddle Switch

SPP 221492 221491

PART NO.

221494 221495

LAS/TAC LASER - M-16, M-4 (REQUIRES BAYONET LUG) Las/Tac for M-16, M-4 with Slide Switch Las/Tac for M-16, M-4 with Slide Switch and Paddle Switch

221496 221498

LAS/TAC LIGHT - M-16, M-4 (REQUIRES BAYONT LUG) Las/Tac 6 Volt Light for M-16, M-4 with Slide Switch Las/Tac 6 Volt Light for M-16, M-4 with Slide Switch and Paddle Switch

221497 221499 221500 221501

LAS/TAC MOUNTS FOR SHOTGUNS Single Ring Shotgun Mount for 1” Magazine Tubes, including Winchester, Mossberg, Remington and other shotguns with extended magazine tubes.

25004

Dual Ring Shotgun Mount for 1” Magazine Tubes, including Winchester, Mossberg, Remington and other shotguns with extended magazine tubes

25000

Dual Ring Shotgun Mount for 26mm Magazine Tubes, including Benelli and other shotguns with extended magazine tubes

25005

Prairies: 1-866-652-2877

Las/Tac TL-2 Light and Laser on Mossberg Shotgun

25001

Single Ring Shotgun Mount for 26mm Magazine Tubes, including Benelli and other shotguns with extended magazine tubes

West: (604) 526-1631

IR 221493 221502

Las/Tac on Uzi

LAS/TAC LIGHT - UZI (REQUIRES BAYONET LUG) Las/Tac 6 Volt light for UZI with Slide Switch Las/Tac 6 Volt light for UZI with Paddle Switch

Head Office: 1-866-652-2877

Las/Tac 3 Volt Light on SIG 226

East: 1-877-993-9968

Las/Tac Light and Laser on MP5SD

283

FIREARMS SIGHTS Laser Sights by LASER DEVICES INC. TL-2 TACTICAL LIGHTS AND MOUNTS TACTICAL LIGHT FEATURES • Waterproof to 20 meters • Aircraft 6061T-6 aluminum housing • Deeply knurled body provides a positive non-slip grip • Powerful 3 volt, 6 volt or 9 volt light • Interchangeable switch assemblies allow TL-2 lights to be configured for either handheld or weapon use • Patented shock absorbing lamp head allows the light to be weapon mounted on rifles, pistols, submachine guns and shotguns TL-2 TACTICAL LIGHTS WITH 1”: WEAVER RING 3 Volt TL-2 with Toggle Switch 3 Volt TL-2 TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch 6 Volt TL-2 with Toggle Switch 6 Volt TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch 3 Volt TL-2 with Push Button (ON/OFF/Momentary) Switch 6 Volt TL-2 with Push Button (ON/OFF/Momentary) Switch 3 Volt TL-2 with Straight Wire Paddle Switch 6 Volt TL-2 with Straight Wire Paddle Switch 3 Volt TL-2 with Coil Wire Paddle Switch 6 Volt TL-2 with Coil Wire Paddle Switch

• High pressure xenon bulb emits a blinding bright white light

• Light beam can be focused from spot to flood • Light provides one hour of bright illumination on each set of batteries

• All lights supplied with Lithium batteries with a ten year shelf life

• One inch diameter housing fits Weaver and NATO 1913 rings

• TL-2 light and switch assemblies are interchangeable with Classic Las/Tac systems PART NO. 21361 21036 21113 21307 21314 21315 21362 21114 21363 21115

TL-2 TACTICAL LIGHTS WITH 1” NATO 1913, (PICATINNY) MIL-SPEC RING MOUNT 3 Volt TL-2 with Toggle Switch and NATO 1913 Ring 14031 3 Volt TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch and NATO 1913 Ring 14032 6 Volt TL-2 with Toggle Switch and NATO 1913 Ring 14033 6 Volt TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch and NATO 1913 Ring 14034 9 Volt TL-2 with Toggle Switch and NATO 1913 Ring 14035 9 Volt TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch and NATO 1913 Ring 14036 3 Volt TL-2 with Push Button (ON/OFF/Momentary) Switch and NATO 1913 Ring 14037 6 Volt TL-2 with Push Button (ON/OFF/Momentary) Switch and NATO 1913 Ring 14038 9 Volt TL-2 with Push Button (ON/OFF/Momentary) Switch and NATO 1913 Ring 14039 3 Volt TL-2 with Straight Wire Paddle Switch and NATO 1913 Ring 14040 6 Volt TL-2 with Straight Wire Paddle Switch and NATO 1913 Ring 14041 9 Volt TL-2 with Straight Wire Paddle Switch and NATO 1913 Ring 14042 3 Volt TL-2 with Coil Wire Paddle Switch and NATO 1913 Ring 14043 6 Volt TL-2 with Coil Wire Paddle Wire Paddle Switch and NATO 1913 Ring 14044 9 Volt TL-2 with Coil Wire Paddle Switch and NATO 1913 Ring 14045

TL-2 TACTICAL LIGHTS - SUPPLIED WITH BATTERIES 3 Volt TL-2 with Toggle Switch 3 Volt TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch 6 Volt TL-2 with Toggle Switch 6 Volt TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch 9 Volt TL-2 with Togle Switch 9 Volt TL-2 with 3-Way (ON/OFF/Momentary) Toggle Switch 3 Volt TL-2 with Push Button (ON/OFF/Momentary) Switch 6 Volt TL-2 with Push Button (ON/OFF/Momentary) Switch 9 Volt TL-2 with Push Button (ON/OFF/Momentary) Switch 3 Volt TL-2 with Paddle Switch 6 Volt TL-2 with Paddle Switch 9 Volt TL-2 with Paddle Switch 3 Volt TL-2 with Coil Wire and Paddle Switch 6 Volt TL-2 with Coil Wire and Paddle Switch 9 Volt TL-2 with Coil Wire and Paddle Switch 3 Volt TL-2 with Paddle Switch and OFF (Kill) Toggle Switch 6 Volt TL-2 with Paddle Switch and OFF (Kill) Toggle Switch 9 Volt TL-2 with Paddle Switch and OFF (Kill) Toggle Switch 3 Volt TL-2 with Paddle Switch and ON/OFF Toggle Switch 6 Volt TL-2 with Paddle Switch and ON/OFF Toggle Switch 9 Volt TL-2 with Paddle Switch and ON/OFF Toggle Switch

PART NO. 21355 15012 21337 21116 21338 18016 18017 18018 18019 21357 21354 21358 21356 21353 21359 15014 21447 21449 15015 21448 21440

FILTERS Red Filter, 3 Volt / 6 Volt TL-2 Infrared Filter, 3 Volt / 6 Volt TL-2

39997 39998

FLASHLIGHT SPECIFICATIONS ELECTRICAL SPECIFICATIONS Light Output: 125 lumens for 9 volt 95 lumens for 6 volt 25 lumens for 3 volt Bulb Type: High pressure xenon Battery Life: 1 hour (depending upon temp.) Battery Type: Lithium 3X3 volt 123A for 9 volt Lithium 2x3 volt 123A for 6 volt Lithium 1x3 volt 123A for 3 volt MECHANICAL SPECIFICATIONS Limited Warranty: One year Length: 6.7 in.; 16.9 cm., 9 volt 5.3 in.; 13.4 cm., 6 volt 4.0 in.; 10.1 cm., 3 volt Diameter of Head: 1.0 in.; 2.5 cm Weight w/o 5.7 oz.; 161.6 grams, 9 volt Batteries: 4.6 oz.; 130.4 grams, 6 volt 3.3 oz.; 93.6 grams, 3 volt Environment: Waterproof to 20 meters

Specifications may change without notice

OPERATOR® HIGH INTENSITY LED TACTICAL LIGHTS LED TACTICAL LIGHT FEATURES • Waterproof to 20 meters • Extremely bright 125 lumen output • Uses a 5 watt LUXEON™ high intensity LED • Allows the identification of facial features at 25 meters • Regulated power supply in the 6-volt light maintains consistent brightness as the batteries drain • Offers 45 to 60 minutes of bright illumination • LED element is rated for 20,000 hours of intermittent use • Solid state illuminator eliminates recoil induced lamp failures • LED illuminator is highly resilient to shock, offering the ultimate in reliability for both handheld and weapon mounted applications. • Aircraft 6061T-6 aluminum housing • Deeply knurled housing provides a positive non-slip grip • Interchangeable switch assemblies allow tactical lights to be configured for either handheld or weapon use • Available with an integrated A.R.M.S. throw lever mount or 1” ring mount with NATO 1913 base that will fit all NATO/Picatinny rail systems • All lights supplied with LDI lithium batteries with a 10 year shelf life • Made in the USA

284

HANDHELD OR WEAPON MOUNTED WATERPROOF TACTICAL LIGHTS Three-year warranty on the high intensity LED illuminator OPERATOR® LED HIGH INTENSITY TACTICAL LIGHTS - SUPPLIED WITH BATTERIES. Part No. OPERATOR® LED HIGH INTENSITY TACTICAL LIGHTS 6-VOLT 9-VOLT OPERATOR LED with Toggle Switch 21460 21467 OPERATOR LED with 3-Way (On/Off/Mom) Toggle Switch 21461 21468 OPERATOR LED with Push Button (On/Off/Mom) Switch 21462 21469 OPERATOR LED with Straight Wire Paddle Switch 21463 21473 OPERATOR LED with Coil Wire and Paddle Switch 21464 21470 OPERATOR LED with Paddle Switch and Off (kill) Toggle Switch 21466 21471 OPERATOR LED with Paddle Switch and On/Off Toggle Switch 21465 21472 OPERATOR® LED HIGH INTENSITY TACTICAL LIGHTS WITH A.R.M.S. THROW LEVER MOUNT OPERATOR LED with Toggle Switch and A.R.M.S. Mount OPERATOR LED w/3-Way (On/Off/Mom) Toggle Switch and A.R.M.S. Mount OPERATOR LED w/Push Button (On/Off/Mom) Switch and A.R.M.S. Mount OPERATOR LED with Straight Wire Paddle Switch and A.R.M.S. Mount OPERATOR LED with Coil Wire and Paddle Switch and A.R.M.S. Mount OPERATOR LED with Paddle Switch and Off (kill) Toggle Switch and A.R.M.S. Mount OPERATOR LED with Paddle Switch and On/Off Toggle Switch and A.R.M.S. Mount

Part No. 6-VOLT 21131 21132 21133 21134 21135 21137

9-VOLT 21138 21139 21140 21141 21142 21143

21136

21144

Luxeon™ is a trademark of the Lumaled Corporation; OPERATOR® is a trademark of Laser Devices, Inc.; A.R.M.S™ is a trademark of the Atlantic Research Marketing Systems Inc.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS SIGHTS Laser Sights by AimPoint LASER SIGHTS LAW ENFORCEMENT / MILITARY TECHNICAL SPECIFICATIONS

AIMPOINT® MICRO T-1

AIMPOINT® COMPM4

OPTICAL DATA System Passive Red Dot Collimator Reflex Sight Magnification 1X Eye relief Unlimited Reticle, size 4 MOA Optical coating Anti reflex and Band Pass coatings, NVD compatible

Ideal for rifles, carbines, shotguns, submachineguns and handguns. Weight 3.7 oz. (105g) including mount. 1X (nonmagnifying) parallax free optic. Compatible will all generations of Night Vision Devices (NVD). 6 night vision compatible settings and 7 daylight settings – one extra bright for use with laser protection glasses or in bright desert sunlight. Integral Picatinny-style base allows easy attachment to any rail.. Patent pending mount is keyed to the sight body to absorb recoil. New ACET technology allows 50,000 hours (over 5 years) of constant operation from one battery. 4 MOA dot. Hard anodized non-reflective finish.. Submersible to 80 feet (25 meters). Precision adjustments for windage and elevation. Top of protective caps fits into holes on adjustment screws – no other tool required. Use as a stand alone sight or “piggybacked” on larger magnifying, thermal, or night vision optics.

ELECTRONIC DATA Battery Type One 3 V lithium battery, type CR2032, commercially available Battery Life, typical** Over 5 years of continuous (day and night) use at pos 8 of 12 and Switch, dot brightness 12 settings – 4 NVD and 8 Daylight of which 1Extra Bright, MECHANICAL DATA Material housing Extruded, high strength aluminum, hard anodized Surface finish Black to dark gray, non-glare finish Material lens covers Rubber, black, non-glare finish Adjustment Range ±1 m at 100 meters (±1 yds at 100 yds) in windage and elevation, Mounting Keyed surface Patent pending mount keyed to the sight body to absorb recoil DIMENSIONS Length 62 mm (2.4) Width/height 41 mm x 36 mm (1.6” x 1.4”) for sight only and 41 mm x 40 mm (1.6” x 1.6”) for sight with Mount Ring width none Weight 84 grams (3.0 oz) Sight only, 105 grams (3.7 oz) Sight with Mount ENVIRONMENTAL DATA Temperature Range -45 oC to +71 oC (-50 oF to +160 oF) Water resistance 45 m (150 ft.) Fits on Picatinny rails

AIMPOINT® COMPM2 - M68/CCO ELECTRONIC DATA Battery Type One 3 Volt Lithium battery type 2L76 or DL1/3N Battery Life, typical** CET technology, 1.000-10.000 hours average. Typically 10 years at NVD position Switch, dot brightness 10 positions, 4 NVD, 6 daylight, of which 1 Extra Bright

Compatible with every generation of NVD. CET technology allows up to 10,000 hours of daytime operation on one battery. 100,000 hours of use on NVD setting. Unequalled light transmission. Submersible to 75 feet (25 meters). Standard CQB sight for Special Forces worldwide. CompM2 – M68/CCO is the standard sight for U.S. Army and U.S. Air Force

MECHANICAL DATA Material housing Extruded high strength aluminium Surface finish Hard anodized, matte, Graphite Gray Material lens covers Thermoplastic Elastomer, black non-glare Adjustment 1 click = 10 mm at 80 meters = 13 mm at 100 meters = 1�2” at 100 yds Mounting 1 ring, 30 mm or Aimpoint QR

TECHNICAL SPECIFICATIONS

DIMENSIONS Length Width/height Ring width Weight

OPTICAL DATA System Parallax Free, Reflex, Collimator System Magnification No magnification (1X) Eye relief Unlimited, No centering required Reticle, size Red dot, diameter 4 MOA* Optical coating Anti Reflex coating all surfaces. Multilayer coating for reflection of red light. Band Pass coating for NVD compatibility

ENVIRONMENTAL DATA Temperature Range -45ºC to +70ºC (-50ºF to +160ºF) Water resistance Submersible to 25 m (80ft) water depth *MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1” at 100 yards. ** Depending on power setting. Dimensions and weights for CompML2 and CompM2 are given with Flip-Up Lens Covers

Head Office: 1-866-652-2877

West: (604) 526-1631

130 mm (5.1”) 55 mm (2.2”) Max 30 mm (1.2”) 200 grams (7.1 oz)

Prairies: 1-866-652-2877

TECHNICAL SPECIFICATIONS

Compatible with every generation of Night Vision Devices (NVD). Super ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery. Internal voltage regulator allows the CompM4 to be used with any AA size battery.. Seven night vision compatible settings and 9 daylight settingsr. QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear. Mount base is “keyed” into to the body of the sight to absorb recoil. Mount base screws directly into the sight – no separate sight ring is required. 500,000 hours of use on NVD setting. 2 MOA dot for close combat and long distance engagement. Matches perfectly with Aimpoint 3XMag, (magnifier module). Unequalled light transmission. Front lens opening is threaded for addition of killFlash® anti-reflective device. Submersible to 150 feet (45 meters). Vertical spacer included. Standardized as the US Army’s new M68CCO. Improved adjustment caps are easier to remove, and are protected against impact. Can be used with a carry handle adaptor for use on all M16 rifles.

OPTICAL DATA System Passive Red Dot Collimator Reflex Sight Magnification 1X Eye relief Unlimited Reticle, size 2 MOA Optical coating Anti Reflex coating all surfaces. Multi-layer coating for reflection of red light. Band Pass coating for NVD compatibility ELECTRONIC DATA Battery Type AA Battery Life, typical** 80 000 hours for good quality battery Switch, dot brightness 16 positions, 7 NVD, 9 daylight, of which 1 Extra Bright MECHANICAL DATA Material housing Extruded high strength aluminium Surface finish Hard anodized, matte, Black Material lens covers rubber, black matte Adjustment 1 click = 16 mm at 100 meters = 1�2” at 80 yds Mounting Keyed surface Patent pending mount keyed to the sight body to absorb recoil DIMENSIONS Length 120 mm (4.7”) Width/height 53x60 mm (2.1”x2.4”) sight only - 72x72 mm (2.8”x2.8”) including mount Ring width none Weight 265 g (9.3 oz) sight only - 335 g (11.8 oz) with integrated mount ENVIRONMENTAL DATA Temperature Range -45 oC to +71 oC (-50 oF to +160 oF) Water resistance 45 m (150ft)

AIMPOINT® 3XMAG

Mountable on a rail system behind Aimpoint® sights. Extremely fast and ingenious mounting solution (Twist Mount - Picatinny). Can also be mounted with a regular 30 mm ring. Provides extended range to the operator. Combines the best of two worlds – CQB & semi-sniping. Increases confidence, performance and flexibility. No influence on point of impact –– No need for re-zeroing the sight. Doubles as handheld magnifying monocular. TECHNICAL SPECIFICATIONS OPTICAL DATA System Magnifying Module Magnification 3X Eye relief at 5° FOV 40 – 90 mm at full FOV 60 – 65 mm Reticle, size Optical coating -

East: 1-877-993-9968

MECHANICAL DATA Material housing Surface finish Anodized aluminum, dark grey, rubber covered black Material lens covers Adjustment Mounting The 3XMag is provided with a 30 mm diameter tube (for mounting) and with 4 screw holes in the bottom surface for other mounting alternatives. DIMENSIONS Length Width/height Ring width Weight

110 mm (4.3”) 44x41 mm (1.7” x 1.6”) 30 mm 200 g (7,1 ounces) inc rubber cover

ENVIRONMENTAL DATA Temperature Range -45° C - 70° C in operation and storage Water resistance 20 meters (67 ft)

285

FIREARMS SIGHTS Laser Sights by AimPoint LASER SIGHTS AIMPOINT® COMPML2

AIMPOINT® COMPM3 ELECTRONIC DATA Battery Type One 3 Volt Lithium battery type 2L76 or DL1/3N Battery Life, typical** CET technology, 1.000-10.000 hours average Switch, dot brightness 10 positions, Off and 9 daylight, of which 1 Extra Bright

Designed for day use, including dusk and dawn. CET technology allows up to 10,000 hours of operation one battery. Submersible to 25 meters (75ft). Also available with 2X power-fixed attachment. TECHNICAL SPECIFICATIONS OPTICAL DATA System Parallax Free, Reflex, Collimator System Magnification No magnification (1X) Eye relief Unlimited, No centering required Reticle, size Red dot, diameter 4 MOA* Optical coating Anti Reflex coating all surfaces. Multilayer coating for reflection of red light

130 mm ( 5.1”) 55 mm (2.2”) Max 30 mm (1.2) 200 grams (7.1 oz)

ENVIRONMENTAL DATA Temperature Range -45ºC to +70ºC (-50ºF to +160ºF) Water resistance Submersible to 25 m (80ft) water depth *MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1” at 100 yards **Depending on power setting. Dimensions and weights for CompML2 and CompM2 are given with Flip-Up Lens Covers

AIMPOINT® COMPML3 ELECTRONIC DATA Battery Type One 3 Volt Lithium battery type 2L76 or DL1/3N Battery Life, typical** 50,000 hours at setting 7 out of 10, CompM3 = 500,000 hours at NVD setting Switch, dot brightness 10 settings – Off, 9 Daylight of which 1 Extra Bright

Designed for day use, including dusk and dawn. New technology called ACET allows 50,000 hours of operation on one battery. Available in 2 dot sizes (2 and 4 MOA). Submersible to 135 feet (45 meters). Outer rubber cover now available in earth brown. Comes with replaceable outer black rubber cover. Reduced training time and ammunition. TECHNICAL SPECIFICATIONS OPTICAL DATA System Passive Red Dot Collimator Reflex Sight Magnification 1X Eye relief Unlimited Reticle, size 2 and 4 MOA * Optical coating Anti reflex

286

MECHANICAL DATA Material housing Extruded, high strength aluminum Surface finish Hard anodized, black, non-glare finishSight body and mount protected by a rubber cover, mat black Material lens covers Thermoplastic elastomer, black, non-glare finish Adjustment 1 click = 10 mm at 80 meters = 13 mm at 100 meters = 1�2” at 100 yds Mounting 1 ring, 30 mm or Aimpoint QR DIMENSIONS Length Width/height Ring width Weight

130 mm(5.1”) 55 mm x 55 mm (2.2” x 2.2 ”) 30 mm 220 grams (7.8 oz) incl. lens covers. Rubber cover 50 grams (1.7 oz)

ENVIRONMENTAL DATA Temperature Range -45 o C to +71o C (-50 o F to +160 o F) Water resistance 45 m (135 ft) *MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1” at 100 yards ** NEW Technology called ACET

ELECTRONIC DATA Battery Type One 3 Volt Lithium battery type 2L76 or DL1/3N Battery Life, typical** 50,000 hours at setting 7 out of 10 Switch, dot brightness 10 settings – 4 NVD, 6 Daylight of which 1Extra Bright

Compatible with every generation of NVD. New technology called ACET allows 50,000 hours of operation on one single battery (on setting 7 out of 10). 500,000 hours of use on NVD setting. Unequalled light transmission. Available in 2 dot sizes (2 and 4 MOA). Submersible to 45 meters (135 feet). Comes with replaceable outer black rubber cover. Outer rubber cover available in Dark Earth Brown

MECHANICAL DATA Material housing Extruded, high strength aluminum, hard anodized, black, non-glare finishSight body and mount protected by a rubber cover, mat black Surface finish Hard anodized, matte, Dark Graphite Gray Material lens covers Thermoplastic elastomer, black, non-glare finish Adjustment 1 click = 10 mm at 80 meters = 13 mm at 100 meters = 1�2” at 100 yds Mounting 1 ring, 30 mm or Aimpoint QR

TECHNICAL SPECIFICATIONS

DIMENSIONS Length Width/height Ring width Weight

OPTICAL DATA System Passive Red Dot Collimator Reflex Sight Magnification 1X Eye relief Unlimited Reticle, size 2 and 4 MOA * Optical coating Anti reflex, 1st, 2nd and 3rd Generation NVD compatible (M2 only)

ENVIRONMENTAL DATA Temperature Range -45 o C to +71o C (-50 o F to +160 o F) Water resistance 45 meters (135 ft) *MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1” at 100 yards **NEW ACET technology

130 mm (5.1” ) 55 mm x 55 mm (2.2” x 2.2 ”) Max 30 mm (1.2”) 220 grams (7.8 oz) incl. lens covers. Rubber cover 50 grams (1.7 oz)

AIMPOINT® LPI TECHNICAL SPECIFICATIONS Light source Wavelength Beam output power* Beam Shape Beam divergence Laser class

Setting High 840 nm (IR)* 0.1 Mw** 5 x 2 mm typ 0.5 mrad 1**

Adjustment of laser beam Adjustment of laser beam

The Aimpoint® LPI, IR Laser Aiming Device is an active aiming device or target designator for military and Law Enforcement applications in darkness or poor light conditions. It is a development based on long experience in engineering and manufacturing of lasers ranging from pistol to military infantry rifle applications. The Aimpoint LPI is intended as a complement to the passive aiming systems from Aimpoint. It is designed to fit directly on an Aimpoint red dot sight, which means that no special rail system is required. Export license/End-user certificate is required for this product.

Head Office: 1-866-652-2877

West: (604) 526-1631

Power supply Quantity Power Size Type

Setting Low 840 nm (IR)* 0.005 Mw** 5 x 2 mm typ 0.5 mrad 1**

1 Click = 0.28 mrad ± 20 mrad

Battery 1 3V DL1/3N, 2L76 LiMn02

* Typical **Important notice: Beam output power will be set as required by the user. The user is solely reponsible for the observation of the applicable safety regulations. The max and the min level can be separated by a factor of no more than 20. DIMENSIONS Housing width 44 mm ± 0.5 mm Housing height 24 mm ± 0.5 mm Overall (housing) length (47.5 ± 2 mm) 77 mm ± 2 mm Weight Estimated weight including battery < 130 gr

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS SIGHTS Laser Sights by AimPoint LASER SIGHTS MILITARY AIMPOINT® MPS3 The Aimpoint MPS3 is a non-magnifying sight with unlimited eye relief allowing a rapid speed of target acquisition. The MPS3 features manually adjustable reticle brightness for all light conditions. Thanks to its NVD compatibility, the MPS3 can be used 24 hours a day. Aimpoint’s revolutionary ACET technology gives the Aimpoint MPS3 an improved LED and an impressive battery lifetime of 80.000 hours of continuous use on a single AA battery. The Aimpoint MPS3 is the third generation of passive electronic reflex collimator sights suitable for medium or heavy support weapons. The MPS3 has been developed primarily for military applications. It is ideal for use on mounted weapon systems, on land vehicles, helicopters or ships. Its simplicity of use, based on the “One Function Principle” allows the user to concentrate on the target and operate the sight even with thick winter gloves. Export license/End-user certificate is required for this product.

Compatible with every generation of NVD. Designed to stand up to recoil of heavy weapons. Accessory rails on sight allow for mounting IR or visible lasers. Can be used with any AA size battery. ACET technology combined with a AA battery gives 80,000 hours (over 8 years) of typical usage on one battery. 500,000 hours of use on NVD setting. 7 night vision compatibility settings, 9 day settings of which one extra bright. 2 MOA dot size for long distance engagement. One Function principle for simplicity of use in field (one rotary switch for light intensity) Manually adjustable reticle brightness. Multi Purpose Sight for use on land, air and at sea. 1X sight (no magnification).

TECHNICAL SPECIFICATIONS OPTICAL DATA System Passive Red Dot Collimator Reflex Sight Magnification 1X, no magnification Eye relief Unlimited Reticle, size 2 MOA Optical coating Anti reflex, all optical surfaces. Band Pass Coating for NVD compatibility ELECTRONIC DATA Battery Type One AA size battery, (rechargeable 1.2V), alkaline/lithium 1.5V or lithium 3-3.7V (acceptable voltage 1.2-5 volt) Battery Life, typical** Over 8 years of continuous (day and night) use at pos 12 of 16 and over Switch, dot brightness 16 settings – 7 NVD (Night Vision Device), 9 Daylight of which 1 Extra Bright MECHANICAL DATA Material housing High strength aluminum Surface finish Anodized black, non-glare finish, black to dark grey Material lens covers Rubber, black, non-glare finish Adjustment Range ± 4 m at 200 meters (±4 yds at 200 yds), ± 16 m at 800 meters (16 yds at 800 yds) in windage and elevation Mounting Requires a mount, for example Aimpoint MG Mount, a 3-step ballistic mount available. Fits MIL-STD 1913 Rail System “Picatinny Rail”. DIMENSIONS Length Width/height Ring width Weight

175 mm (6.9” ) 84 mm x 81 mm (3.3” x 3.2”) None 720 grams (25.4 oz) Sight only, 1230 grams (43.4 oz ) with MGM Mount

ENVIRONMENTAL DATA Temperature Range -45 oC to +71 oC (-50 oF to +160 oF) Water resistance 1 m (3 ft.)

AIMPOINT® CEU™

TECHNICAL SPECIFICATIONS OPTICAL DATA Operating Principle Two mirrors, reflective device, for unaffected and maintained target view Optical Magnification 1 x, unlimited eye relief Clear Aperture 25 mm diameter "see through" Optical Coating Anti reflex coated protection elements and high reflection coated mirrors for maximum transmission, NVD compatible Optical Signature The unit does not influence the forward optical signature

The Aimpoint® CEU™ (Concealed Engagement Unit) is the latest component incorporated into Aimpoint's unique "System-ofSystems" approach. It gives the user the ability to observe or engage a threat from a protected position. The Aimpoint CEU easily switches from side to side, so an operator can safely look around either right- or lefthand corners. It can also be quickly taken out of the way in either direction to rapidly return to direct engagement. The Aimpoint CEU turns an operator's standard weapon into a scouting tool that allows him to look over walls or around corners without exposing themselves to enemy fire. It's no longer necessary to equip a team member with a special weapon or an expensive and fragile electronic device to make this possible. Since the Aimpoint CEU does not affect the weapon's point of impact, it can easily be passed from one member of a unit to another Head Office: 1-866-652-2877

as long as both weapons are outfitted with the proper interface. There is simply no other device on the market using the same technology. The Aimpoint CEU is designed to be compatible with all Aimpoint sights. In Aimpoint's modular "System-of-Systems" approach, the Aimpoint red dot sight is the core of the system and is easily supplemented with the Aimpoint® 3XMag TM, night vision device, the Aimpoint CEU, or other modules as the situation demands. The result is increased versatility and performance. The Aimpoint CEU is a patented system developed by DSTO in Australia, under the name Off-Axis Viewing Device (OAVD). Aimpoint has world-wide exclusive rights for production and sales outside Australia. The CEU can be used as a hand held viewing device.

West: (604) 526-1631

Prairies: 1-866-652-2877

MECHANICAL DATA Mount Mount for MIL-STD 1913 Rail System "Picatinny Rail", via the Aimpoint TwistMount Maintainability Two o-rings shall be kept lubricated, so as to enable easy attach/detach of the CEU from the mounting Ring and easy rotation under control. DIMENSIONS Dimensions length 87 mm (3.4") width 115 mm (4.5") height* 51 mm (2") CEU with low Top ring, attached to the TwistMounFM on the Picatinny Rail 60 mm (2.4"), CEU with high Top ring, attached to the TwistMounFM on the Picatinny Rail height 42 mm (1.7") CEU with low Top ring, detached from the TwistMount bottom 51 mm (2") CEU with high Top ring, detached from the TwistMount bottom height 42 mm (1.7") CEU only, detached from the TwistMount Top ring and TwistMount bottom Height of optical axis** 30 mm (1.2") or 39 mm (1.5") alternatively Rotation around optical axis ±130°, measured from CEU pointing vertically upwards, as reference Mass 135 grams (4.8 oz), CEU only, separated from the TwistMount. Low Top ring 32 grams (1.1 oz) High Top ring 54 grams (1.9 oz) TwistMount bottom part 60 grams (2.1 oz) Material – Housing High strength, glass reinforced, PP polymer, black, non-glare finish Material Cover Rubber, black, non-glare finish Radioactive Materials None (Tritium 0%, Thorium 0%, Thorium Fluoride 0%) Hazardous Materials None (Mercury 0%) ENVIRONMENTAL DATA Temperature Range -45°C to +71 °C (-50 of to +160 OF) Chemical Resistance Function not affected by weapons cleaners, lubricants, oil or insect repellants

CEU mounted

* over top surface of Picatinny Rail and with CEU sidewards, "horizontally" rotated ** over top surface of Picatinny Rail

East: 1-877-993-9968

287

FIREARM CLEANING SUPPLIES Cleaning Brushes by MDC

STEEL CLEANING BRUSHES These stainless steel brushes are tough and long wearing. Effective in removing heavy leading from the bores of barrels fired with factory lead.

#BR00165 .38 / 9mm S.S. Forcing Cone

#BR02293 .40 Cal. Pistol S.S. Barrel

#BRM08 .45 Pistol S.S. Barrel

#BRM14 .410 Gauge Shotgun S.S. Barrel #BRM12 .12 Gauge Shotgun

#BR00122 .38 / 9mm S.S. Barrel

#BRM13 .20 Gauge Shotgun #BRM04 .22 S.S. Pistol

1.5" DIAMETER CLEANING BRUSH UTILITY TOOTHBRUSHES Lightweight, one-piece utility toothbrushes with molded black nylon handles. Available with a choice of nylon, brass, stainless steel or bronze bristles.

Specifically designed to clean all Def-Tec Gas Guns (see page 22). This stainless steel bristled brush with wooden handle is 22-1/4" long. Lightweight, but tough on dirt. Product code #BRM18

Stainless Steel Nylon Bronze Brass

BRM01 BRM02 BRM03 BRM17

Cleaning Supplies by CREST COMPLETE GUN CLEANING ULTRASONIC FIREARM CLEANING & LUBRICATING SYSTEM This cleaning system is based on the Tru-Sweep™ ultrasonic technology which is renown throughout the precision cleaning industry. Ultrasonics produces high frequency sound waves which produce thousands of alternating high and low pressure waves per second. As these waves pass through the Chem-Crest Firearm cleaning solution, microscopic bubbles form, resulting in a scrubbing action which cleans the smallest dents and grooves, removing even the fouling associated with shooting. Heated ultrasonic cleaning, followed by rinsing and ultrasonic lubrication, insures all cleaned parts are moisture free and protected.

• • • • •

Safe, easy and efficient Cleans in just minutes Removes gun powder, carbon, dirt, and oil Cleans in difficult areas to reach with only field stripping Water based cleaning that requires no hazardous solvents

288

TANK DIMENSIONS (LxWxD)

LIQUID CAPACITY

SHIPPING WEIGHT*

F275HT

9.25" x 5.25" X 4."

0.75 gal

33 lbs

90/270 watts

F575HT

11.5" x 6" x 6"

1.75 gal

47 lbs

135/405 watts

F690HT

19.5" x 5.5" x 6"

2.75 gal

62 lbs

180/540 watts

F950HT

11.5" x 9.5" x 6"

2.75 gal

62 lbs

180/540 watts

F1875HT

19.5" x 11.5" x 6"

5.75 gal

80 lbs

270/810 watts

F636HT

36" x 6" x 8"

5.50 gal

271 lbs

500/1000 watts

F1436HT

36" x 14" x 8"

6.0 gal

300 lbs

500/1000 watts

F1236HT

36" x 12" x 8"

11.00 gal

300 lbs

1000/2000 watts

F4-575HT

6" x 11.5" x 6" (four chambers) 6" x 19.5" x 6" (four chambers)

1.75 gal (three chamber) 2.5 gal (three chamber)

140 lbs

500/1000 watts

300 lbs

1000/2000 watts

MODEL

F4-690HT

SONIC POWER AVG./PEAK

LONG FIREARM CLEANER

CHEMICAL REFILLS AND ACCESSORIES

Model F636HT Cleaning system is designed for barreled actions up to 35" long. The tank is fabricated from heavy gauge 316L bright annealed stainless steel and powered by Crest's State-of-the Art Industrial Transducers and Sweep frequency generator. The high powered 500 watt generators feature constant power output and adjustable output power intensity control. The system also features an adjustable liquid temperature control system, front mounted stainless steel drain, baskets, (with removable handgun compartment dividers) auxiliary lubricating pan, removable covers and enough Chem-Crest Chemicals to clean and lubricate 2000 firearms.

CC235 Cleaning Concentrate - (use 4-6 oz./gal.) CC400L Lubricant - (use full strength) Microcide SQ Clean/Disinfect Con.- (2 oz./gal.) Microcide SQ Clean/Dis. Con. with measure Microcide I Clean/Dis. Concentrate Small Parts Basket - (4" dia. X 4" high) with handle -(Custom sizes available. Call to discuss your needs.) PF-8 Extra Filter, 6 Pack Portable Air-Compression System PF-85P Filtration System H-500 Zero to Thirty Minute Timer for 500W Generator H-1000 Zero to Thirty Minute Timer for 1000W Generator

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

firearm cleaning supplies Cleaning Supplies by OTIS cleaning systems M4/M16 Softpack Cleaning System

.50 Caliber Cleaning System

This is a Law Enforcement version of the military M4, M16, M249 and Mod 46 cleaning system with brass finished parts. This set maintains all 5.56MM rifles. Memory-Flex cleaning rods quickly clean the receiver, chamber, neck and bore; obstruction removers knock out bore obstructions and stuck cases. Special scraper and pick for the bolt face, slide and locking lugs, all purpose brushes and compressive instruction booklet maintain flawless performance in mission critical situations.

The .50 Caliber Rifle/Pistol Cleaning System is specifically designed for your .50 caliber rifles & pistols. In addition, this cleaning system also has big bore capabilities. It includes two .50 caliber Memory-Flex cleaning rods: an 8” for .50 caliber pistols, and a 40” for .50 caliber rifles, along with a large heavy weight brass obstruction remover and a slotted tip. This kit contains brass scraper components such as the brass scraper, female rod handle, a receiver brush, and a .50 caliber end brush, all of which allow for precision cleaning in those hard to reach areas of your firearms. Also included in the .50 Caliber Rifle/Pistol Cleaning System are 3” panoply patches, a .50 caliber chamber brush and bore brush, a bore reflector/flag safety, and the all-in-one Otis O85 Ultra Bore Solvent. The .50 caliber gear has a thread size of 10/32.

FG-223-9

LE Rifle/Pistol Cleaning System This set maintains all 5.56MM rifles, and .40 caliber pistols. Flexible cleaning rods quickly clean the receiver, chamber, neck and bore; obstruction removers knock out bore obstructions and stuck cases. Special scraper and pick for the bolt face, slide, and locking lugs, all purpose brushes and a comprehensive instruction booklet maintain flawless performance in mission critical situations. FG-223-40 pistols

* Also available for 9MM pistols & .45 Caliber

5.7MM Cleaning System The 5.7MM Cleaning System is specifically designed to clean the P90, the Five-seven, and all other 5.7MM weapon systems. Flexible cleaning rods, bore brushes, and special brass scraper components make it possible to clean properly from Breech-to-MuzzleTM in the direction of the bullet. The 5.7MM Cleaning System includes all of the tools necessary to clean every part of your firearm. All components are neatly packed in a black nylon softpack with a locking zipper, and belt loop attachment. FG-223-57

M16 Buttstock Cleaning System The standard issue cleaning system for the M16 weighing only 8oz. fits right into the buttstock of the weapon. The system includes all of the necessary equipment to clean and clear your firearm. Now fast and accurate cleaning can be done in minutes having the convenience of your cleaning system located right in the buttstock of your weapon.

6.8MM Cleaning System This cleaning system is specifically designed to clean and maintain all 6.8MM weapon systems. Flexible cleaning rods and swabs quickly clean the receiver, chamber, neck and bore; obstruction removers knock out bore obstructions and stuck cases. Special scraper components for the slides, and bolt face, all purpose brush, and comprehensive instruction booklet maintain flawless performance in mission critical situations. All components are neatly packed in a black nylon softpack case, with locking zipper and belt loop attachment. FG-268

7.62 Sniper Cleaning System The Law Enforcement version of the military sniper system with brass finished parts. This set maintains all 7.62 sniper rifles M40, M24, M240 and any .308 caliber rifles. Memory-Flex cleaning rods quickly clean the receiver, chamber, neck and bore; obstruction removers can knock out bore obstructions and stuck cases. Special scraper and pick for the bolt face, slide and locking lugs, all purpose brushes and comprehensive instruction booklet maintains flawless performance in mission critical situations. Lens brush for scopes and optics. A masterpiece in weight saving gear, the complete tool set is only 1lb. The zippered pouch replaces 3lbs. of conventional cleaning gear. FG-308-5

FG-224-2

Shotgun Cleaning System

Otis Grip Kit Cleaning System Now!! Reclaim the lost space in the standard handgrip of all M4/M16. The law enforcement brass version of the military issue item # 225-56. The essential Memory-Flex rod, tips, and brush are neatly packed into the Otis Grip Kit. It was developed for lightweight special operations weapons. Bore clearing and cleaning can be accomplished in seconds. The set compliments and is fully compatible with the extensive #223-9 M4/M16 Cleaning System. FG-225-56

FG-250

**Also available in 7.62mm.

After many enhancements Otis introduces the new and improved shotgun cleaning system. Now shotguns can be cleaned properly. Clean the receiver, chamber, forcing cone and bore completely in a one step operation. This 14 piece tool set not only cleans the barrel, but also has the special brushes and tools to clean and maintain the trigger group, bolt, magazine tube and gas system. The shotgun can be cleaned on the line while shooting without disassembly. Bore obstructions, such as mud, snow or a stuck case can be easily knocked out. Fast and accurate cleaning with the patented swab system can be accomplished in minutes. FG-410

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

289

firearm cleaning supplies Cleaning Supplies by OTIS cleaning systems 9mm Professional Pistol Cleaning System

37MM Grenade Launcher Cleaning System

This system can be specifically designed to meet all Glock handgun manufacturer’s specifications. This is an 18 piece tool set with special tools including two Memory-Flex cleaning rods, pin punch, scraper, pick, end brushes, t-handle, obstruction remover, cleaning solvent, special lubricant and bore reflector/flag safety. Heavy panoply patches, nylon and bronze brushes easily strip the copper from bores.

This system is specifically designed to clean and maintain the 37MM Grenade Launchers for the flash bang, and the smoke grenade. The essential tools needed to clean the single-shot, breech-loaded 37MM weapon come packed in the 4” round ballistic nylon softpack case. Included are flexible cleaning rods, the tools to give you 360 degree coverage in a 37MM barrel, patches and solvent. Also included are components of the brass scraper set, such as the locking lug picks, brass scraper, short nylon end brush, and rod handles, for those hard to reach places.

FG-645-9

.40 Caliber Pistol Cleaning System Designed to clean .40 Caliber law enforcement pistols and sub guns. Includes solid brass components, 8”, 12” & 20” Memory-Flex cleaning rods to clean any barrel length. Now automatics can be cleaned correctly from Breech-to-Muzzle without disassembly. Panoply patches and heavy-duty bore brushes easily strip the copper, carbon and other residue from the bores & barrel. Special handle with scraper, pick and brushes clean the receiver, trigger group and bolt. Everything is neatly packed in an 8oz., pocket size softpack case.

FG-937

Deluxe Law Enforcement Cleaning System The 85211 is a 29 piece tool set designed to clean law enforcement pistols and sub guns 9mm through .45 caliber. Cleans 5.56MM & 7.62MM rifles and 12/10 gauge shotguns. Solid brass components, an 8”, 12” and 30” Memory-Flex cleaning rod allow you to clean any barrel length. Now automatics can be cleaned correctly from Breech-to-Muzzle without disassembly. All-caliber patches and heavy-duty bore brushes easily strip the copper from bores. Special handle with scraper, pick and brushes clean the receiver, trigger group and bolt. Everything is neatly packed in an 11oz., pocket size softpack case.

FG-645-41

.45 Caliber Pistol Cleaning System This system can be specifically designed to meet Glock, Smith & Wesson, SIG, HK, Taurus, Beretta, Colt, and many other handgun manufacturer specifications. It is designed to clean all .45 Caliber pistols, as well as the MP5. This is an 18 piece tool set with special tools including two Memory-Flex cleaning rods, pin punch, scraper, pick, end brushes, t-handle, obstruction remover, cleaning solvent, special lubricant and bore reflector/flag safety. Heavy panoply patches, nylon and bronze brushes easily strip the copper from bores.

FG-85211

Optics Cleaning System The Optics Cleaning System contains everything necessary to preserve the quality and functionality of scopes, infrared night vision equipment, rangefinders, laser sighting devices, binoculars, cameras and eyewear. Fast, gentle, and accurate cleaning of dust, fingerprints, dirt, water spots, etc. can be accomplished in minutes.

FG-645-45

FG-240

Otis Deluxe Law Enforcement Elite The Otis Elite is designed to maintain all rifles, shotguns, and pistols from .17 caliber through 12/10 gauge. This one system eliminates all the multiple kits required to service and clean these calibers and gauges. The Otis Elite includes our popular 85211 with an extra compartment to hold up to five brushes. For versatility the 85211 can be worn on a belt or easily put into a pocket or backpack for extreme situations. Also included is the entire line of over 14 brass bore and chamber cleaning brushes, two tubes of Otis O85 Ultra Bore Solvent, and an extra supply of all-caliber patches. All of the components are neatly stored in a black nylon case, which includes a lock for secure storage of pistols, shotgun chokes, or whenever extra security is necessary. The lining is treated to prevent rust. Also featured in the Otis Elite is a zippered side pocket for extra space, a good place to store ear protection, gloves, large magazines, or other tools you feel necessary for home or range maintenance. The Otis Elite is a complete and portable armors gun cleaning center, with over 40 gun cleaning components, detailed gun cleaning guide, and a lifetime warranty. The Otis Elite is the Hallmark of Excellence in firearm maintenance.

The Otis Range Bag has all the essentials needed to properly clean and maintain all .223 caliber, .308 caliber, 9MM, .40 caliber, .45 caliber, and 12/10 gauge firearms. This system can be used at the range, or back at the barracks when you’re finished shooting, and ready to clean. Supplies include 3” all-caliber patches, 3” panoply patches, 2” small caliber patches, nylon and blue nylon all purpose receiver brushes, 1/2oz. and 2oz. O85TM Ultra BoreTM Solvents, flexible cleaning rods, obstruction removers, brass scraper set components, bore reflector/flag safety’s, and assorted bore brushes including: .22 cal., .27 cal., .30 cal., .38 cal., .45 cal., and 12/10 gauge. Also included are instructional CD-Rom’s, and comprehensive instructional brochures. All items are neatly packed and stored in a duffle bag case.

FG-1000-852

FG-4015

290

Head Office: 1-866-652-2877

Otis Range Bag

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TARGETS Targets OFFICIAL NRA TARGETS

• • • •

Absolute uniformity of targets Quality controlled custom-made paper of uniform weight and texture Printing is identical on all targets 50 year history of quality targets and reliable service

• •

Careful attention to packaging Posters also available in handy rolls of 250 with dispensing box (sold in individual rolls or cartons of 20 rolls)

LAW ENFORCEMENT TARGETS B-27 & B-24 POLICE PISTOL TARGET 50 Yard Target Paper (25 meter scoring rings) Product code: ANTB-27 Size 35 x 45

B-34 POLICE PISTOL TARGET 25 Yard Target Paper (50 Yard B-27 Reduced) Size 14" x 24" Product code: ANTB-34

Product code: ANTB-24 Size 24 x 45

B-27C CENTRE 50 Yard Target Paper Repair Centre for B-27 Size 12-1/2" x 18-1/2" Product code: ANTB-27C

BPD-LL LESS THAN LETHAL TARGET Cardboard life-size silhouette for less than lethal training. Black, red, green and yellow Size 24" x 71" Product code: LDBPD-LL

COMPETITION TARGETS ST-3 SIGHTING & SPECIALTY TARGET

B-5 COMPETITION TARGET

100 Yard White Index Rifle Sighting Target Size 14" x 14"

20 Yard Special Tagboard Timed & Rapid Fire Size 10-1/2" x 12"

Product code: ANTST-3

Product code: ANTB-5

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

291

TARGETS

Targets REALISTIC TARGETS

THE FINEST STRESS TRAINING TARGETS AVAILABLE Professionally illustrated targets present stunning reality - unlike photographs, REALISTIC TARGETS pop with colour and give lifelike detail, defining areas that the camera could never reproduce.

• • • • • • •

REALISTIC TARGETS are used by law enforcement agencies throughout Canada and the U.S. as well as by the U.S. Military. 9 targets + 11 overlays = 99 interchangeable target combinations! Printed on durable non-glare Husky paper (target size is 25" x 25") Targets and overlays are suitable for indoor or outdoor use. Full centre-mass scoring lines on all targets (except #6 and #7 targets). Target #8 is also available as a unique training aid with multiple hit double tap training features. Adhesive backed overlays are slightly larger to present the officer with lifelike images at maximum range and in low-light conditions.

No. 1

25"

35"

No. 8

No. 3

No. 7

No. 10

No. 4

No. 6

No. 9

No. HK2

No. 5

No. 2

292

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS

Firearms by SMITH & WESSON PISTOLS

MODEL 5906TSW/ 5943TSW/5903TSW/ 5946TSW

MODEL 4003TSW/ 4006TSW/4043TSW/ 4046TSW .40 S&W

MODEL SW99 9MM OR .40 S&W

9MM

Action: Traditional DA, Model 5943/5946 - DA Only Barrel Length: 4" Weight: 28.9 oz., Model 5906/5946 - 38.3 oz. Overall Length: 7-1/2" Finish: Satin Stainless

MODEL 41 .22 LONG RIFLE Action: SA Barrel Length: 5-1/2”, 7” Overall Length: 10-1/2” Weight: 41 oz. Finish: Blue

Action: Traditional Double Action, Model 4043/4046 - DA only Barrel Length: 4" Weight: 28.5 oz. Model 4006-4046- 37.8 oz. Overall Length: 7-1/2" Finish: Satin Stainless

Action: Traditional Double Action Barrel Length: 9mm- 4-1/4" .40- 4-1/8” Weight: 9mm- 25.4 oz., .40- 25.2 oz. Overall Length: 9mm- 7-1/8", .40- 7-1/4” Finish: Black/Melonite

THE NEW M&P PISTOL FROM SMITH & WESSON Reinforced polymer chassis, superior ergonomics, ambidextrous controls, proven safety features. The new standard in reliability when your job is to serve and protect and your life is on the line. Available in 40S&W, 9mm, and 357Sig. DAY-TO-DAY DURABILITY • • • •

Embedded stainless steel rigid chassis system Through-hardened stainless steel slide & barrel Stainless steel structural components Black Melonite® finish, yielding a surface hardness of 68 HRc • S&W lifetime service policy

REAL-WORLD VERSATILITY • • • • •

Unparalleled ergonomic design Ambidextrous slide stop Reversible Magazine Catch 3 interchangeable palmswell grip sizes universal rail

SAFETY AT HAND • Sear deactivation lever – safe disassembly without pressing trigger • Internal lock system – helps prevent unauthorized use • Magazine disconnect, (optional for LE/Gov't) • Passive trigger safety • Strike block safety

POLICE

MILITARY

Firearms by FN HERSTAL 5.7 X 28MM SYSTEMS FIVE-SEVENN® & FIVE-SEVENN® TACTICAL 5.7 X 28MM Technical data : • Operating principle • Trigger mechanism • Trigger pull • Weight loaded • Magazine capacity • Overall length • Barrel length • Frame, slide cover , magazine • Maximum effective range

Five-seveN® Five-seveN® Tactical Delayed blowback double action only single action 4.5 -6.5 daN (10 -14 lbs) 2 -3 daN (4.5 -6.6 lbs) 744 g (1.64 lb) 756 g (1.67 lb) 20 rounds 208 mm (8.2 in) 122.5 mm (4.8 in) Black polymer 50 m

PISTOLS

FORTY-NINE™

MK3

9 X 19mm .40 S&W

9 X 19mm

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BDA9 & BDA0 9 X 19mm

293

FIREARMS Firearms by FN HERSTAL STANDARD P90®

The P90 is the ultimate system for operating in urban and other close-quarter battle scenarios. This system is built around FN's revolutionary 5.7 x 28mm ammunition. It utilizes the SS190 armor-piercing duty round, a dual-core projectile that destabilizes on impact to limit over-penetration. The P90 provides a compact, lightweight and completely ambidextrous platform for this ammunition. The compact 50-round box magazine runs horizontally along the top of the P90. Empty cases are ejected downward where they cannot interfere with the operator. The P90 fires from a closed bolt, giving it outstanding accuracy and making it easy to keep rounds on target. It is the ideal personal defense weapon for armored vehicle or helicopter crews, executive protection, law enforcement and tactical entry teams. The Standard P90 is also available in a semi-automatic only model.

Specifications • 5.7 x 28mm • Selective fire or semi-automatic only • 10.2" barrel length • 19.7" overall length • 6.0 lbs. (empty) • 6.7 lbs. (with loaded 50-round magazine) • Cyclic rate: 900 rpm • Blowback operated, closed bolt system • Non-magnifying white reticle optical reflex sight and emergency backup iron sights Product No: 3818900093 (Standard, Selective Fire) 3818900793 (Standard, Semi-automatic only)

P90® TRIPLE RAIL (TR) The P90 TR provides maximum flexibility of system configuration with three M1913 accessory rails. The full-length top rail accepts a wide variety of optical or electronic sights and the two side rails will take accessories such as tactical lights and external laser target designators. The P90 TR is also available in a semi-automatic only model.

Specifications • 5.7 x 28mm • Selective fire or semi-automatic only • 10.2" barrel length • 19.7" overall length • 5.7 lbs. (empty) • 50-round magazine capacity • Cyclic rate: 900 rpm • Blowback operated, closed bolt system Product No: 3818900493 (Triple Rail, Selective Fire) 3818900393 (Triple Rail, Semi-automatic only)

294

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARMS

Compressed Air Systems by FN HERSTAL FN 303 AND ACCESSORIES

THE FN 303 IS ALSO AVAILABLE IN UNDER-CARRIAGE VERSION FOR MOST TACTICAL RIFLES A

FN 303 The FN 303 is designed to be the premier system for situations requiring less lethal response. Completely dedicated to reduced lethality and liability, the basis of the FN 303 concept lies in its ammunition. The .68 caliber, 8.5 g weight projectiles utilize a fin stabilized polystyrene body and non-toxic bismuth forward payload to provide both a more accurate, greater effective range than other less than lethal weapons. The primary effect of the projectile is trauma, which directly neutralizes the aggressor. In addition, secondary effects from the projectiles can be delivered via a chemical payload depending on mission requirements. Magazines are 15 round capacity with a clear rear cover to allow for rapid ammunition payload verification. The compressed air powered FN 303 launcher is designed to fire less lethal projectiles exclusively, with an effective range

of 50 meters at a point specific target for law enforcement and a maximum range of 100 meters for military applications. It is made from durable, lightweight polymer and features comfortable ergonomics and an easy to operate safety. In addition to the flip-up iron sights, the integrated Picatinny 1913 rail can be used to mount red dot sights or other accessories. An undercarriage version with mounts is available for most tactical rifles. Available accessories for the FN 303 include compressed air bottle, air filling equipment, tactical vest, sling and carrying case.

EOTECH™ HOLOGRAPHIC SIGHT

26700 26711 - 1 year extended warranty 26714 - 4 year extended warranty

C-MORE™ RED DOT SIGHT Customized C-MORE™ RED DOT SIGHT With adjustable range compensator.

PROJECTILES The projectiles have been specially designed to break up on impact, thereby eliminating any TRAINING / IMPACT risk of penetration injury. All .68 cal. projectiles Rear payload: 100% have an 8.5 g weight, non-toxic glycol base. polystyrene body and a granular non-toxic bismuth forward payload.

WASHABLE PAINT

PERMANENT PAINT

Rear payload: Fluorescent pink pigment in non-toxic glycol base. Cleaning: water and soap.

Rear payload: Latex based polymeric paint.

OC (OLEORESIN CAPSICUM) Rear payload: Orange dyed non-toxic glycol base +10% OC (pepper) concentrate at 2 million S.H.U.

TACTICAL REMOTE REFILLING STATION Housed in a durable, anti-shock case, this easy to handle field bottle refilling station is waterproof and allows rapid refilling of FN 303 air bottles. The twin 9 liter compressed air cylinders allow refilling of 26 FN 303 standard bottles (2,730 shots) at the operational pressure of 3,000 PSI. Easy to use control panel. Bag carries/stores (1) FN 303 launcher, (2) spare air bottles, (3) spare magazines, tactical accessories, ammunition and more.

GAS AND ELECTRICAL COMPRESSORS Easily and safely ensure the refilling of the Tactical Remote Refilling Station’s air cylinders. It is equipped with a pressure gauge and safety valve. It takes about 20 minutes to fill the cylinders from 2,000 to 4,300 PSI, one hour from 0 to 4,300 PSI.

Head Office: 1-866-652-2877

TACTICAL SLING

TACTICAL VEST Specially designed vest to carry spare magazines and air bottles.

303 CARRYING BAG Customized bag carries/stores (1) FN 303 launcher, (2) spare air bottles, (3) spare magazines, tactical accessories, ammunition and more.

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

295

FIREARMS Firearms by GLOCK PISTOLS STANDARD

COMPACT

SUB-COMPACT

TACTICAL

COMPETITION

9 X 19 MODEL G17 Barrel Length: Weight: Mag Cap: Height: Length:

4.49” 22.04 oz. 10/17 5.43” 7.32”

MODEL G19 Barrel Length: Weight: Mag Cap: Height: Length:

4.02” 20.99 oz. 10/15 5.00” 6.85”

MODEL G26 Barrel Length: Weight: Mag Cap: Height: Length:

3.46” 19.75 oz. 10 4.17” 6.29”

MODEL G34 Barrel Length: Weight: Mag Cap: Height: Length:

5.32” 22.92 oz. 10/17 5.43” 8.15”

MODEL G17L Barrel Length: Weight: Mag Cap Height: Length:

6.02” 22.92 oz. 10/17/19(31) 5.43” 8.85”

4.49” 22.92 oz. 10/15 5.43” 7.32”

MODEL G23 Barrel Length: Weight: Mag Cap: Height: Length:

4.02” 21.16 oz. 10/13 5.00” 6.85”

MODEL G27 Barrel Length: Weight: Mag Cap: Height: Length:

3.46” 19.75 oz. 9 4.17” 6.29”

MODEL G35 Barrel Length: Weight: Mag Cap: Height: Length:

5.32” 24.52 oz. 10/15/17 5.43” 8.15”

MODEL G24 Barrel Length: Weight: Mag Cap: Height: Length:

6.02” 26.70 oz. 10/15/17 5.43” 8.85”

4.49” 23.28 oz. 10/15 5.43” 7.32”

MODEL G32 Barrel Length: Weight: Mag Cap: Height: Length:

4.02” 21.52 oz. 10/13 5.00” 6.85”

MODEL G33 Barrel Length: Weight: Mag Cap: Height: Length:

3.46” 19.75 oz. 9 4.17” 6.29”

MODEL G25 Barrel Length: Mag Cap: Height: Length:

4.02” 15/17 5.00” 6.85”

MODEL G28 Barrel Length: Weight: Mag Cap: Height: Length:

3.46” 18.66 oz. 10/12 4.17” 6.29”

MODEL G29 Barrel Length: Weight: Mag Cap: Height: Length:

3.782” 24.69 oz. 10 4.45” 6.85”

.40 MODEL G22 Barrel Length: Weight: Mag Cap: Height: Length:

.357 MODEL G31 Barrel Length: Weight: Mag Cap: Height: Length:

.380

10mm MODEL G20 Barrel Length: Weight: Mag Cap: Height: Length:

4.60” 27.68 oz. 10/15 5.47” 7.59”

SLIMLINE

.45 MODEL G21 Barrel Length: Weight: Mag Cap: Height: Length:

296

4.60” 26.28 oz. 10/13 5.47” 7.59”

MODEL G30 Barrel Length: Weight: Mag Cap: Height: Length:

3.78” 23.99 oz. 10 (9) 4.76” 6.77”

Head Office: 1-866-652-2877

West: (604) 526-1631

MODEL G36 Barrel Length: Weight: Mag Cap: Height: Length:

Prairies: 1-866-652-2877

3.78” 20.11 oz. 6 4.76” 6.77”

East: 1-877-993-9968

FIREARM ACCESSORIES Laser Grips by CRIMSON TRACE

IMMEDIATE DECISIVE ADVANTAGE Instinctive and Ergonomic Laser Control. Critical instances develop in a heartbeat â&#x20AC;&#x201C; there's no time to flip a switch to activate your sight. You need instant activation and only Crimson Trace has it. Grab your gun and the laser is activated; relax your grip slightly and the laser is off. Lasergrips give you total control, just like a tactical flashlight. Adjustability. Variances in both firearms and ammo means that no two weapons will hit the same spot. Think about it: Would you buy a rifle scope that you couldn't adjust? All Crimson Trace laser sights are adjustable for windage and elevation.

Repeatable Pinpoint Accuracy. Adjust your Lasergrips once and they STAY adjusted, standing up to the heaviest recoil and abuse. They can be removed and replaced without losing zero. Extendable Battery Life. The common, inexpensive batteries that power the Lasergrips give you over four hours of on-time use and a shelf life of over five years. More than double that of competing brands. Does Not Replace Critical Components. Be careful about replaces internal components that are crucial to the function of your gun. Lasergrips do not replace critical components.

Compatibility and Versatility. Crimson Trace Lasergrips are compatible with most popular holsters, firearm-mounted lights and other accessories. Solid Steady Beam. A constant laser beam is the choice of the U.S. Military and armed professionals. A blinking laser is a distraction and less visible than Crimson Trace's solid beam. A side-by-side comparison is all the evidence you need.

CRIMSON TRACE LASERGRIPS FOR AR-15 / M-16 & RAIL MOUNTS All the advantages of increased speed and accuracy that Crimson Trace is known for can now be found for long guns. Two laser systems: the LG-525 and the VF-302.

SMITH & WESSON 3rd GENERATION, FULL-SIZE, DOUBLE-STACK LG-359 Rubber Overmold

AR-15 / M-16 LG-525 Rubber Overmould The LG-525 is an integrated laser system for AR-15 / M-16 rifles with an A1 or A2 upper. (Will not fit A3 removable carry-handle versions.) This system replaces the factory pistol grip with a rubber over-moulded Lasergrip that houses the front activation button, battery and master ON/OFF switch. The LG-525's laser housing mounts securely to the carry handle with a cam-lock system. This cam-lock can be removed in a second to service the rifle, but will maintain zero when replaced.

USER INSTALLED LASERGRIPS FOR GLOCKS Glock 17, 17L, 22, 24, 31, 34, and 35 LG-617

Instinctive/Ergonomic Activation The LG-525's activation button is located on the front of the grip for positive control of the laser.

Quick-Release Cam- Lock

Glock 19, 23, 25 and 32 LG-619

The LG-525 is equipped with a quick-release, quarter-turn cam-lock that releases the laser from the carry-handle or locks it in place.

Glock 26, 27, 28 and 33 LG-626

Glock GLS-630 Custom Integrated

Head Office: 1-866-652-2877

West: (604) 526-1631

RAIL-EQUIPPED LONG GUNS VF-302 Rubber Overmould The VF-302 is a laser-equipped vertical foregrip that can be mounted on any Picatinny (1913) rail. It uses our proven LG-302 Beretta 92 Lasergrips wrapped over a skeletonized billet aluminum grip.

Secure Mounting. Fully Adjustable

Thumbscrew Mount

A.R.M.S. Mount

VF-302 uses twin thumbscrews. Rugged, economical and secure.

VF-302M uses a military-style A.R.M.S. mount for quick release and security.

Prairies: 1-866-652-2877

East: 1-877-993-9968

The LG-525 is fully adjustable for windage and elevation.

297

FIREARM ACCESSORIES Grips by HOGUE

THE HOGUE MONOGRIP AVAILABLE IN NYLON, SOFT RUBBER & HARDWOODS

HOGUE FANCY HARDWOODS

This attractive one-piece design eliminates the shortcomings of traditional two-piece grips. The Hogue Monogrip slides on revolver frames from the bottom, requiring no modifications of the firearm. They attach in seconds - a special "stirrup" device (patented) solidly secures the grip to the frame.

• • • • • • • •

Hogue Fancy Hardwood grips for revolvers and pistols are widely acclaimed as the finest handgun stocks available. Highest quality workmanship and materials go into every pair making them not only attractive but also extremely functional.

Hand-fit to the actual firearm for a secure and comfortable grip Famed Hogue orthopedic handshape with ambidextrous palm swells Attractive "cobblestone" texture provides a positive non-irritating stippling feature Generous recoil shoulder All Monogrips are fully relieved for speedloaders Rubber Monogrips are molded from a durable synthetic rubber that is not spongy or tacky

Nylon Monogrips (guaranteed for as long as you own them) are made from 40% fiberglass reinforced nylon Molded in a handsome black colour, Hogue Monogrips dress up either blue or stainless handguns

• •

Handmade and fit to actual factory frames - then hand-polished to a nonslippery sheen Available in GONCALO ALVES (the favourite choice, being light brown with dark configurations) and PAU FERRO (a darker wood resembling walnut)

Hogue Monogrips Fit: S&W K-Frame: S&W J-Frame: S&W N-Frame: Colt Python: Ruger:

Models 10; 12; 13; 14; 15; 17; 18; 19; 48; 53; 64; 65; 66; 67; 581; 586; 681; 686 Models 30; 32; 34; 36; 37; 38; 51; 60 (Round Butt) Models 25; 27; 28; 29; 57; 58; 629 I-Frame Security-Six; Police Service Six and Speed-Six; Serial Number Prefixes 151 and above - Post 1976 Production

HOGUES FOR AUTOMATICS All Hogue grips for semi-automatics and automatics are made to exacting specifications. Each is hand fit to the particular gun it is designed for. Semi-automatic frame styles vary greatly as do the grips that fit them. Each Hogue grip is designed to complement the handgun that it was designed for. Among Hogue's patented stocks are their easy-to-install, two-piece grips for the Third Generation Smith & Wesson automatics. Hogue's exclusive molding process is exceptionally superior when it comes to semi-automatics. Because the rubber used actually chemically bonds to the insert, these grips have a smooth, hard surface on the inside. This duplicates a stock grip configuration on the inside while maintaining exacting tolerances . . . an important

feature that sets Hogue apart. Other brands with steel inserts must wrap rubber all the way around the insert, which can hang up on the vital working mechanisms found so close to the grip on many automatics.

THE HOGUE HANDALL™ SOFT RUBBER UNIVERSAL GRIP SLEEVE A well received new addition to the Hogue family of grips, this scientifically designed durable rubber sleeve with finger grooves and palm swells has a specially designed shape that fits all Glock models, full size as well as compact. N.B. This rip sleeve is designed to be used with standard Glock semi-automatic pistols or other pistols of similar size and function. DO NOT install Hogue Handall™ on any pistols with grip safeties or functions. For example, it should not be used on a Colt 1911 style pistol as it will disable the grip safety mechanism. S&W Sigma 3rd Gen. HK-USP

Unique universal design fits these semiautomatics as well:

• • • • • • • • • • • • • • • • • • • • • •

S&W Models 39, 41, 59, 422, 622, 645, 669*, 745, 2206, 3906, 6906* S&W Third Generation Series 1000, 4000, 5900 with or without frame mounted de-cockers Sig Sauer P220, 225, 226, 228 and 229 Ruger P85, 89, 90, 91 and 22/45 Colt Double Eagle Beretta 84*, 85*, 92 and 92C* Taurus 92, 92C*, 99, 100, 101 EAA Witness 83* and 85 Browning Buckmark, Challenger II, BDA*, Hi-power and clones Springfield P9, CZ75, Tangfolio and clones Astra A-100, Constable II* Interarms Firestar* Walther P-38, P-88 Llama Omni Steyr GB KBI MBK and Compact, GKK92C Bernadelli PO18S Daewoo DP51 H&K 70-Z Intratec TECDC9, TEC22 Automag III Zastava 99

THE HOGUE OVERMOLDED™ RIFLE STOCK Hogue stocks incorporate every desirable feature a fine rifle stock should have including a sleek straight comb, palm swells and a "varminter" style forend that is treated with Hogue's unique "Cobblestone" texture. OverMolding with rubber is superior in every way and provides a comfortable, non slip smooth attractive finish that is durable and extremely quiet. For those who prefer it, "hard" synthetic Nylon stocks are also available.

Ruger 10-22

* Requires minor trimming

298

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

FIREARM ACCESSORIES Slings by BOONIE PACKER SAFARI SLINGS

SAFARI SWIVEL

SAFARI IS THE ONE SLING THAT REALLY HELPS SHOOTERS GET GOOD SHOTS AWAY FASTER!

Safari's patented design makes it tougher than anyone else's swivel. Compare the Safari quick detachable swivel with others and you will see and feel the difference in quality immediately. The Safari Swivel is made to the highest quality standards possible. • Much stronger - engineered to last as long as you and your gun • Totally automatic patented (#4505012) locking mechanism - easy on and off • Unique construction won't come undone like other swivels • No wire loop to squeak or pull out • Fits guns mounted with quick detachable swivel bases • Now available in blued and nickel finish

Safari Sling's patented system cradles the rifle out in front, right side up, like it should be. All you do is raise the rifle and fire - no need to "unsling". The system's nylon loop slides free instantly, saving time in getting good shots away. For the long haul, the soft, extra wide 2" webbing spreads the weight evenly over shoulders and back, reducing strain and fatigue. Amazingly, the space age materials are not only rugged but feather light . . . only 4 ounces total weight. Compare slings . . . you'll choose Safari!

NO ELASTIC NO BOUNCE NO SCREWS GEMINI+1 AND GEMINI 2+2 WITH SAFARI SWIVELS The Gemini+1 sling and swivel set consists of twin Safari quick detachable swivels and an extra tough 1" black sling with Clingcote™, a new rubberized coating that stops slipping and sliding. The 2+2 sling and swivel set has a top quality, extra tough, 2" extra wide, Quickslide sling with Clingcote™ and two quick detachable Safari swivels. This sling comes in a choice of colour and patterns.

• • • • • • •

The 2+2 sling's soft extra wide 2" webbing spreads weight reducing strain and fatigue Safari swivels have a totally automatic patented (#4505012) locking mechanism - easy on and off Gemini+1 has a super tough 1" black webbing with an extra tough steel buckle The 2+2 sling's Quickslide buckle adjusts instantly Gemini+1 and the 2+2 sling have the new Clingcote™rubberized coating that stops slipping and sliding like ordinary nylon straps Safari swivel's patented construction won't come undone Both sets available with nickel finish swivels

QC-16-CON SLING KIT

A kit to convert military M16/M14 sling for in-front patrol carry. 1-1/4" black webbing. Product # AJFB-QC16-CON

SAFARI SERIES™ SLINGS - "IN-FRONT CARRY" HUNTING SLINGS wCODE AJFB-BP2-BKW AJFB-BP2-ORW AJFB-BP2-RTW AJFB-BP2-WLW AJFB-BP2-RT

WIDTH 2" 2" 2" 2" 1-1/2"

COLOR BLACK ORANGE REALTREE WOODLAND REALTREE

WILL FIT... RIFLE OR SHOTGUN WITH 1" OR 1-1/4" SWIVELS (swivels not included) RIFLE OR SHOTGUN WITH 1" OR 1-1/4" SWIVELS (swivels not included) RIFLE OR SHOTGUN WITH 1" OR 1-1/4" SWIVELS (swivels not included) RIFLE OR SHOTGUN WITH 1" OR 1-1/4" SWIVELS (swivels not included) RIFLE OR SHOTGUN WITH 1" OR 1-1/4" SWIVELS (swivels not included)

AJFB-BP6-BKW AJFB-BP6-ORW AJFB-BP6-RTW AJFB-BP6-WLW

2" 2" 2" 2"

BLACK ORANGE REALTREE WOODLAND

vent-rib shotguns without factory swivels vent-rib shotguns without factory swivels vent-rib shotguns without factory swivels vent-rib shotguns without factory swivels

MILITARY AND LAW ENFORCEMENT SLINGS

2+2 SLINGS - "OVER-THE-SHOULDER" STRAP

CODE AJFB-BP2-BK AJFB-BP42-BK AJFB-BP43-BK AJFB-BP52-BK AJFB-BP53-BK AJFB-BP16-BK AJFB-BP17-BK

CODE AJFB-QSW-BKW AJFB-QSW-ORW AJFB-QSW-RTW AJFB-QSW-WLW AJFB-QSW-BKWN AJFB-QSW-ORWN AJFB-QSW-RTWN AJFB-QSW-WLWN

WIDTH 1-1/4" 1-1/4" 1" 1-1/4" 1" 1" 1"

COLOR BLACK BLACK BLACK BLACK BLACK BLACK BLACK

WILL FIT... RIFLE OR SHOTGUN WITH 1" OR 1-1/4" SWIVELS AR15, M16, M4 RIFLE & CARBINE. SWIVEL MOUNTED FRONT LOOP. AR15, M16, M4 RIFLE & CARBINE. H&K TYPE SLING. AR15, M16, M4 CARBINE/9MM SMG. SWIVEL MOUNTED FRONT LOOP. AR15, M16, M4 CARBINE/9MM SMG. H&K TYPE SLING. HK RIFLES, CARBINES AND SMGS BENELLI SUPER-90 SHOTGUN WITH PLASTIC STOCK

"SAFARI" SLINGS - FOR BOW HUNTING CODE AJFB-BS-RTW AJFB-BS-WLW

WIDTH 2" 2"

COLOR REALTREE WOODLAND

WILL FIT... NEARLY ALL BOWS NEARLY ALL BOWS

GEMINI +1 SLING

CODE WIDTH AJFB-GM-BK 1" AJFB-GM-BKM 1"

FINISH BLUE NICKLE

COLOR BLACK BLACK

WIDTH 2" 2" 2" 2" 2" 2" 2" 2"

FINISH BLUE BLUE BLUE BLUE NICKEL NICKEL NICKEL NICKEL

COLOR BLACK ORANGE REALTREE WOODLAND BLACK ORANGE REALTREE WOODLAND

WILL FIT... RIFLE OR SHOTGUN WITH STUDS RIFLE OR SHOTGUN WITH STUDS RIFLE OR SHOTGUN WITH STUDS RIFLE OR SHOTGUN WITH STUDS RIFLE OR SHOTGUN WITH STUDS RIFLE OR SHOTGUN WITH STUDS RIFLE OR SHOTGUN WITH STUDS RIFLE OR SHOTGUN WITH STUDS

WILL FIT... RIFLE OR SHOTGUN WITH STUDS RIFLE OR SHOTGUN WITH STUDS

Safety Blocks by BOONIE PACKER PRODUCTS

Head Office: 1-866-652-2877

SAFETY BLOCK

CHAMBER CHECKER

For M16/AR15. Product# AJFSB16

For M203 Grenade Launcher Product# AJFSB203

For semi automatic pistols. Product# AJFCC

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

299

FIREARM ACCESSORIES Speedloaders by JFS SPEEDFOAMS

Soft, versatile loading tray for quick and easy loading of your speedloaders. Each tray holds sixty (60) rounds - and when not in use, can be used as padding to protect your firearm. Product #CAFM001

Containment Systems by CDC CDC’S APC-100 CONTAINS .50 CALIBRE BMG AP! WITHSTANDS MULTIPLE HITS OF ARMOR PIERCING AMMO. USED BY: Airports Bureau of Alcohol, Tobacco, & Firearms Central Intelligence Agency Drug Enforcement Administration Environmental Protection Agency Federal Bureau of Investigations Federal Bureau of Prisons Federal Protective Services Federal Reserve Bank Internal Revenue Service NASA Social Security Administration U.S. Coast Guard U.S. Department of Energy U.S. Air Force U.S. Army U.S. Attorney’s Office U.S. Border Patrol U.S. Customs U.S. Department of Defense U.S. Department of State U.S. Department of Transportation U.S. Fish and Wildlife Service U.S. Immigration Naturalization Service U.S. Marine Corps U.S. Marshall Service U.S. National Guard / Reserves U.S. Navy U.S. Police Departments U.S. Postal Service U.S. Secret Service U.S. Treasury Department V.A. Medical Centers

• Compact size: only 9" long X 5 1/2 “ diameter - 30 lbs. • The APC-100 is Tested and Approved by Federal, State and Local Law Enforcement Agencies. • The APC-100 provides a safe environment for loading and unloading pistol, rifles, shotguns and other firearms. • Withstands multiple hits of armor piercing ammo!

APC-100W (WALL MOUNT)

APC-100PPM W/ PORTABLE PEDESTAL MOUNT BOLTS TO FLOOR

APC-100D (DESK MOUNT) APC-100BPM W/ BOLT-ON PEDESTAL MOUNT

Each APC-100 includes a laminated instruction poster and the new SAFE-EJECT cartridge catcher.

Training Cartridges by PRECISION GUN SPECIALTIES INERT TRAINING CARTRIDGES

300

Available in the following calibers: PISTOL 25 ACP 32 ACP 380 9mm 357 SIG 38 SPL 40 S&W 10mm 45 ACP 44 MAG

Inert training cartridges developed for military and law enforcement use, when training or instructional activities require use of a dummy cartridge. Manufactured from a durable synthetic material and colored “safety orange” for instant identification, Saf-T-Trainers provide safety by greatly reducing the risk of live ammunition and dummy cartridges from becoming mixed during training exercises. An affordable replacement for traditional metallic dummy cartridges.

Head Office: 1-866-652-2877

West: (604) 526-1631

RIFLE 7.62 x 39 223 243 30-30 7mm-08 308 7mmRM 30-06

Prairies: 1-866-652-2877

SHOTGUN 410 20 GA 12 GA

RIMFIRE 22 LR

East: 1-877-993-9968

FIREARM ACCESSORIES Firearm Accessories by BALLISTIC SOLUTIONS CONTAINMENT SYSTEMS The Weapon-Clear systems provide a compact and efficient method of safely loading or unloading all Police & Military issued weapons. By providing a range of units which cover both pistol and rifle calibres with the option of floor, wall or desk mounting. With our extensive in-house R &D and independent testing we have provided a world class solution at an extremely competitive price.

INDEPENDENT TESTING In consultation with Wiltshire Ballistic Services and Cranfield University, we prepared a range of tests which would far exceed the units normal usage even over many years of service. Not only did all systems successfully contain the rounds as listed below there was no evidence of fragmentation or splash back.

Patent Pending Compliant PISTOL-CLEAR H 270 mm W 150mm

D 350 mm Weights 10 Kgs

Our pistol model allows the mounting of the unit either on desktop or wall, thus providing a compact solution to weapon clearance while giving the maximum level of user safety over the complete range of pistol calibres. 28 Rounds in total from 300ft/lbs up to 2800 ft/lbs Ammunition Calibre Quantity Held Witness Paper 9mm 5 Yes No Penetration .38 Spl 5 Yes No Penetration .357 Magnum 5 Yes No Penetration .44 Magnum Remington 5 Yes No Penetration 5.56 * 45 Nato 4 Yes No Penetration 7.62 * 39 Soviet Ball 2 Yes No Penetration 7.62 * 51 L2A2 Ball 2 Yes No Penetration

Patent Pending Compliant

RIFLE-CLEAR H 760mm W 230mm D 650mm Weight 24 Kgs

EMERGENCY-CLEAR H 400mm W 150mm D 330mm Weight 14 Kgs

Our lightweight freestanding rifle model allows it to be positioned where it is most convenient. The unit comes pre drilled for bolting to a concrete surface.

The emergency-clear model is designed to be carried in a vehicle and allows the safe clearance of all weapons from modified blank firing weapons thru all pistol and rifle calibers including .50BMG AP. Many Police forces have found this model to be a more practical and safer replacement than discharge bags.

48 Rounds in total from 300 ft/lbs up to 13334 ft/lbs Ammunition Calibre Quantity Held 9mm 5 Yes .38 Spl 5 Yes .357 Magnum 5 Yes 5.56 * Nato 5 Yes 5.56 * 45Hirtenberger 5 Yes 7.62 * 39 Soviet Ball 5 Yes 7.62 * 51 L2A2 Ball 5 Yes 7.62 * 51 DAG AP 5 Yes 30-06 Gevalot 5 Yes .50 BMG 2 Yes .50 BMG 1 Yes Fold down model is available for special order.

Witness Paper No Penetration No Penetration No Penetration No Penetration No Penetration No Penetration No Penetration No Penetration No Penetration N/A N/A

This unit comes pre drilled allowing both wall and bench mounting if required. 47 Rounds in total from 100 ft/lbs up to 23945 ft/lbs Ammunition Calibre Quantity Held Witness Paper .22rf 5 Yes No Penetration 9mm 5 Yes No Penetration .38 Spl 5 Yes No Penetration .357 Magnum 5 Yes No Penetration 5.56 * 45 Nato 5 Yes No Penetration 5.56 * 45 Hirtenberger 5 Yes No Penetration 7.62 * 39 Soviet Ball 5 Yes No Penetration 7.62 * 51 L2A2 Ball 5 Yes No Penetration 7.62 x 54R 5 Yes No Penetration .50 BMG M2 AP 1 Yes N/A 14.5 x 114 B32 API 1 Yes N/A Patent Pending Compliant

Copies of the original test results are available, please email: - data@weapon-clear.com

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

301

Night Vision Night Vision by B.E. MEYERS Night Vision Systems GRIIP The GRIIP combines the benefits of the IZLID 1000 IR laser and the GBD-III green laser into one convenient unit. The 1 Watt IR laser provides very long range covert marking or targeting of enemy positions. The 250mW green laser enables marking or targeting of locations from late afternoon to post-dawn with an intimidating beam visible to the naked eye for a range of up to 6.5km. Often used for Tactical Air Control Party (TACP) applications to call in air support or as an aiming laser on crew-served weapons, the GRIIP is an ideal solution whenever dusk-to-dawn laser coverage is required and either a visible or IR laser may be required. FEATURES • Long-range IR and visible green lasers • Hand-held or weapon mountable • Battery or external power • Rugged aircraft-grade aluminum construction • Temperature stabilized all-digital electronics

Model Number: Output Power (Visible): Output Power (Infrared) Color: Visible Beam Divergence (Degrees): Infrared Beam Divergence Narrow to Wide (Degrees): Power Supply: Size (Length x Width x Height): Weight: NOHD: Effective Range (Visible): Effective Range (Infrared): 1913 Rail Mount available:

430 250mW 425mW – 950mW Green, Infrared .006_ .01_-.74_ 6-CR123 7.125”L x 1.5”W x 3.5”H 27.6 oz. 1.4m Combined 300m (Day) - 6.5km (Night) 37km (Narrow-Pointer) – 7km (Wide-Illuminator) Yes

DIAL-100 / 100G The AN/PEQ-11 (DIAL-100 ) series of lasers are uniquely designed to meet the performance and ruggedness needs of crew-served weapons up to and including the M2 .50 cal HBMG as easily as they meet the size and minimum weight requirements of the M4 / M16 personal weapons. The DIAL-100 and DIAL-100G combine three lasers available from one aperture: an IR laser aim dot, a visible laser aim dot, and an IR illuminator that is adjustable from 0.02 to 55 degrees field of view (FOV). The units are designed as a common laser suitable for the majority of weapons including M4/M16, M249, M240, M2, and new XM312. FEATURES • Available with Red (DIAL-100) or Green (DIAL-100G) laser • 3-in-1 laser design with common bore sight (simple bore sighting) • Rugged aircraft-grade aluminum construction • Adjustable IR illuminator FOV optimizes tactics • Designed for wide variety of personal and crew served weapons • Training filter included

302

DIAL 100G Model Number: Output Power (Visible): Output Power (Infrared) Color: Visible Beam Divergence (Degrees): Infrared Beam Divergence Narrow to Wide (Degrees): Power Supply: Size (Length x Width x Height): Weight: NOHD: Effective Range (Visible): Effective Range (Infrared): 1913 Rail Mount available:

432P 100mW 120mW Green, Infrared .025_ .02_-55_ 1-CR123 3.75”L x 1.2”W x 3”H 13.5 oz. ~400m 150m (Day) - 2.5km (Night) 5km (Narrow-Pointer) – 69m (Wide-Illuminator) Yes

DIAL 100 Model Number: Output Power (Visible): Output Power (Infrared) Color: Visible Beam Divergence (Degrees): Infrared Beam Divergence Narrow to Wide (Degrees): Power Supply: Size (Length x Width x Height): Weight: NOHD: Effective Range (Visible): Effective Range (Infrared): 1913 Rail Mount available:

429P 25mW 120mW Red, Infrared .025_ .02_-55_ 1 AA or 1-CR123 3.75”L x 1.2”W x 3”H 11.5 oz. 189m 60m (Day) - 800m (Night) 5km (Narrow-Pointer) – 69m (Wide-Illuminator) Yes

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Night Vision Night Vision by B.E. MEYERS Night Vision Systems

MK RANGER The challenge: How to get first (and every) round hits with a Mk19 40mm grenade launcher and not “walk” rounds onto the target with the resulting collateral damage? The answer: B.E. Meyer’s Mk Ranger attachment. The Mk Ranger is a specially designed mount for the high elevation angle requirements of the Mk19 that allows you to mount optics or aiming / illumination lasers on the Mk19, set the target range, aim and fire. First round hits are as easy as putting the dot on the target. The Mk Ranger comes standard with a picatinny rail, IR illumination laser, and IR aiming laser. Other optional IR and visible lasers are available. FEATURES • Point-and-shoot rounds on target • Dial-a-range adjustment • Dual IR lasers for illumination and aiming included • Optional green beam lasers

Quadrant Laser The 203R Quadrant Laser provides a much-needed laser aiming capability to the M-203 40mm grenade launcher. The red aiming laser enables the user to accurately place 40mm grenades out to 400m at night with or without NVGs. The gunner sets the range on the quadrant sight, places the laser on the target, and fires. Windage and elevation adjustments are easily accomplished “on the fly” by adjustments to the laser dot position from the original range estimate. FEATURES • Point-and-shoot rounds on target • Day or night capability • Eye safe laser • Works with or without NVGs • Range scale to 50m to 400m

Head Office: 1-866-652-2877

West: (604) 526-1631

Quadrant Mount Model Number: Output Power (Visible): Output Power (Infrared) Color: Visible Beam Divergence (Degrees): Infrared Beam Divergence Narrow to Wide (Degrees): Power Supply: Size (Length x Width x Height): Weight (With Batteries): NOHD: Effective Range (Visible): Effective Range (Infrared): 1913 Rail Mount available:

Prairies: 1-866-652-2877

East: 1-877-993-9968

203R 4mW N/A Red .06_ N/A 1-CR123 5.6”L x 2.8”W x 3.4”H 9.2 oz. Eye Safe (Class 3) 20m (Day) – 400m (Night) N/A Yes

303

Night Vision Night Vision by B.E. MEYERS Night Vision Systems IZLID 100P / 200P The IZLID 100P and 200P are smaller version of our famous IZLID 1000P “Light Saber”. These 100mW (IZLID 100P) and 200mW (IZLID 200P) IR lasers small enough to fit in the user’s vest or BDU pockets for quick access when needed, but powerful enough to call in airstrikes or aim weapons well over 2km. The small size and light weight but powerful aiming beam that reaches out over 30km, combined with the 6 degree field of view IR illuminator capability, provides the perfect solution for an M4 / M16 as well as an M2 .50 cal HBMG or minigun. These lasers are routinely used on aircraft-mounted weapons and by pilots to point out or illuminate ground targets from the cockpit. These lasers are the best tradeoff between size, weight, performance and cost for many applications. FEATURES • 30km + IR aiming laser capability • Ruggedized to survive extreme environments • Handheld or weapon-mounted • IR Aim dot or wide illuminator mode • Multiple power options (AA, CR123, 3.3vdc, 12vdc)

Izlid 100P - CR123

Izlid 100P - A1

IZLID 100P Model Number: Output Power: Color: Power Supply: Dimensions (Length x Width x Height): Weight (With Batteries): Environment (Waterproof): NOHD: Effective Range Narrow (Pointer) to Wide (Illuminator):

424P-A1, 424P-A1-CR123 45Mw-95Mw Infrared for NVG 2 AA or 1-CR123 6.15”L or 8.5”L x 1.7”W x 1.8”H 9 oz. or 8.5 oz. 20m 333m 34km (Pointer) - 500m (Illuminator)

Izlid 200P

IZLID 200P Model Number: Output Power: Color: Power Supply: Dimensions (Length x Width x Height): Weight (With Batteries): Environment (Waterproof): NOHD: Effective Range Narrow (Pointer) to Wide (Illuminator):

304

425P-A2, 425P-A2-AA, 425P-A2-CR123 95mW-185mW Infrared for NVG 2-C Cells or 2 AA or 1-CR123 6.15”L or 8.5”L x 1.7”W x 1.8”H 9 oz. or 15 oz. or 8.5 oz. 20m 153m (Navy), 950m for all others 39km-780m

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Night Vision Night Vision by B.E. MEYERS Night Vision Systems

IZLID 1000 / 1000P The IZLID 1000 (aka: “The Light Saber”) series are best known for their distinctive powerful beam that shoots out for over 43km and stands out from every other IR laser beam on the battlefield. Overcoming all ambient lighting conditions, the IZLID 1000 lasers places a very powerful and tightly focused IR dot on the target. The bright beam is often used by Tactical Air Control Parties or Forward Air Controllers to communicate visually with aircraft and direct airstrikes precisely and swiftly. The IZLID has the ability to expand the beam to 1 degree providing a very longrange IR illumination capability for IR sensors. The IZLID 1000P adds the additional capability of an internal azimuth / elevation adjustment for boresighting to weapons or sensors. FEATURES • 43km + IR laser capability • Ruggedized to survive extreme environments • Handheld or weapon-mounted options • IR Aim dot or illuminator mode

IZLID 1000P Model Number: Output Power: Color: Power Supply: Dimensions (Length x Width x Height x Diameter): Weight (With Batteries): Environment (Waterproof): NOHD: Effective Range Narrow (Pointer) to Wide (Illuminator):

428P-A1-1 445mW – 950mW Infrared for NVG 4 AA 10.71”L x 2.2”W x 2.87”H x 1.7” Dia. 27.5 oz. 20m 620m 43km (Pointer) - 7m (Illuminator)

DIAL 1K The DIAL-1K is optimized as an IR aiming and illuminator laser for long-range crew served weapons. With an aiming laser that will reach over 30km and an 800mW illuminator laser with adjustable field of view and intensity, the DIAL-1K has the power to light up any environment for a crew-served or vehicle mounted weapon. The ruggedness, system flexibility, and output power is unmatched by any other laser system available. FEATURES • Laser-in-laser combined aiming and illuminator laser • 30km + IR aiming laser capability • 800mW illuminating laser with adjustable Field Of View (FOV) & power • Ruggedized to survive extreme environments • Designed for crew-served and vehicle-mounted weapons

Head Office: 1-866-652-2877

West: (604) 526-1631

DIAL 1K Model Number: Output Power: Color: Power Supply: Size (Length x Width x Height): Weight (With Batteries): Environment (Waterproof): NOHD: Effective Range Narrow (Pointer) to Wide (Illuminator):

Prairies: 1-866-652-2877

East: 1-877-993-9968

431P Aiming Beam: 85 -165mW, Illuminator: 0-800mW Infrared for NVG 4 AA; 10.0-16.5VDC (External) 6.0”L x 3.0”W x 2.6”H 26.8 oz. 20m 476m 43km (Pointer) - 7km (Illuminator)

305

Night Vision Night Vision by B.E. MEYERS Night Vision Systems GBDIIIC: The GBDIIIC “Charlie” is our long-range visual deterrent laser device. For hail and warning applications exceeding 114 meters, the GBDIIIC gets your message out there! Whether its ship-toship signaling, airborne over-watch, or you just want the most effective Non-Lethal visual disruption device available, the ‘Charlie’ has you covered! With twice the power and a more concentrated beam than the GLARE, the GBD3C can reach out to distances previously thought impossible. The Charlie can effectively hail and warn as far away as 4000 meters. Like the GLARE, the GBD3C produces an overtly bright green dazzling laser spot to impair the visual ability of your suspect. Despite its remarkable power, the GBDIIIC is safe beyond the NOHD of 114 meters. The GBDIIIC has been approved for use by ALL branches of the military As with all BE Meyers lasers, the GBDIIIC is fully shock ruggedized for small arms and crew-served weapon systems. • Ultra high-power dazzler output • Fully weapons integratable • Weapon shock ruggedized • Extended battery life • Instant-on (no warm up delay) • Optimized for long range Non-lethal use • Beam size prevents collateral lasing. • No long-term effects beyond NOHD • Approved by USMC, Navy, and Air Force • The most power tactical dazzler in existence

GBD-IIIC Model Number: Output Power (Visible): Output Power (Infrared) Color: Visible Beam Divergence (Degrees): Infrared Beam Divergence Narrow to Wide (Degrees): Power Supply: Size (Length x Width x Height): Weight: NOHD: Effective Range (Visible): Effective Range (Infrared): 1913 Rail Mount available:

532C 250mW N/A Green .29_ N/A 4 AA 10.25”L x 1.75”W x 2.25”H 20.5 oz. 114m 300m (Day) - 4km (Night) N/A No

GLARE MOUT The GLARE is our primary Non-Lethal laser dazzler, and is ideally suited for small-arms weapon integration, as well as mobile crew-served applications. A hand-held kit is also available for non-weapons-mounted deployment. When a suspect individual approaches a restricted or controlled area, the GLARE is able to hail and warn that person before shots have to be fired. Its shockingly bright beam sends an irrefutable, multi-lingual, crosscultural message that “you mean business”. Reports confirm that the GLARE has saved numerous lives of both soldiers and non-combatants in Iraq and Afghanistan. With over thousands of GLAREs in service, there were zero reported failures in the first two years of fielding. It is the smallest and most versatile green laser dazzler in existence, and is already approved for use by all branches of the Armed Services. When only the best will do, BE Meyers’ line of green laser dazzlers have you covered. • High-power dazzler output • Light weight, small profile • Fully weapons integratable • Weapon shock ruggedized • Extended battery life • Instant-on (no warm up delay) • Optimized for most NL applications • Beam size prevents collateral lasing. • No long-term effects beyond NOHD • Only dazzler approved by all DoD branches • Approved by FDA for law enforcement • The best tactical dazzler in existence

306

Glare (MOUT) Model Number: Output Power (Visible): Output Power (Infrared) Color: Visible Beam Divergence (Degrees): Infrared Beam Divergence Narrow to Wide (Degrees): Power Supply: Size (Length x Width x Height): Weight: NOHD: Effective Range (Visible): Effective Range (Infrared): 1913 Rail Mount available:

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

532P-M 125Mw N/A Green .45_ N/A 2-CR123 7.25”L x 1.8”W x 1.7”H 9 oz. 25.2m 150m (Day) - 2km (Night) N/A Yes

East: 1-877-993-9968

Night Vision Night Vision by B.E. MEYERS Night Vision Systems

TGO-IR The #2300C-A1 “TGO-IR” laser system (which stands for TARGET GUIDANCE OPERATION – INFRARED) is typically a weapon or equipment mounted dual laser assembly. The TGOIR is made up of an IZLID-1000P and the 3-Watt IR flood laser. The 3-Watt (#2300-A1) flood acts as an ultra-high power infrared spotlight, while the IZLID-1000P (#428P-A1-1) provides the targeting ‘hot-dot’. When this assembly is mounted to a crew-served weapon system, the user can quickly locate their objective with the IR flood, and instantly target them with the IR dot. The TGO-IR with its’ huge expanse of field-illumination, together with its’ pulsating ‘hot-dot’ at its’ center, provides the ultimate rapid targeting system for “Nap-of-the-Earth” missions. A wide assortment of accessories is available to utilize the TGO-IR in numerous targeting and illumination tasks. A pressure sensitive activation switch can be used to activate the TGO-IR. This is especially useful when the laser is mounted to crew-served and heavy weapon systems as well as with the Soflam and Glid. FEATURES: • The TGO-IR Marker laser system provides both an illumination and spot beam of infrared radiation. • The Dual Remote Fire Switch fires both lasers simultaneously when used with the Power Cable. • The Mounting Bracket provides a single mounting point for the TGO-IR Marker laser system

3 WATT The 3-Watt IR flood has a 1000mW to 3000mW variable output (for use with night vision or infrared sensitive camera systems). The beam is adjustable from a pointer (0.06 degrees) to a wide flood beam (5.0 degrees) with a _ twist of the lens. A multi-position switch allows the laser to be operated at three different power levels: LOW (1000mW), MEDIUM (2000mW), and HIGH (3000mW). The 3-Watt portion produces a variable high output infrared rectangular spot for long range covert illumination. In addition to being able to control the output power, the laser’s beam divergence (or spot size) is adjustable by simply rotating the objective lens collar. With control of both the power and divergence, the TGO-IR is the ultimate night vision targeting and illumination system.

Head Office: 1-866-652-2877

West: (604) 526-1631

3 WATT Model Number: Output Power: Color: Power Supply: Dimensions (Length x Width x Height): Weight (With Batteries): Environment (Waterproof): NOHD: Effective Range Narrow (Pointer) to Wide (Illuminator):

Prairies: 1-866-652-2877

East: 1-877-993-9968

2300-A1 1 Watt, 2 Watt or 3 Watt Infrared for NVG 10-30 VDC (110 VAC Adapter Available) 11.5”L x 1.85”W x 1.85”H 24 oz. 20m 292m 20km (Pointer) - 3km (Illuminator)

307

Night Vision Night Vision by B.E. MEYERS UAV LASERS MiniPoint: The MiniPoint Infrared Laser provides positive confirmation of targets of interest when activated from Air, Ground or Surface vehicles. This laser is observed by Tactical Air Control Parties or Forward Ground Commanders to communicate visually and direct airstrikes precisely and swiftly. B.E Meyer’s compact IR pointing lasers are easily integrated into a variety of Sensor Suites. Don’t let its small size fool you! This 95mW miniature IR laser has the power to point out targets at ranges up to 34km. This compact, reliable, fully remote controlled laser will enhance your Sensor Suites capability. Features: • Pinpoint Accuracy • Compact 95mW Single Laser Design • Wide Operating Range -40 to +70C • Light Weight • Low Power Consumption • Easily Integrated • Low, High & Pulse Modes • Effective Range 34km • Optional Power & Divergence Configurations Available

PinPoint The PinPoint Infrared Laser provides pin point confirmation of targets of interest when activated from Air, Ground or Surface vehicles. This laser is observed by Tactical Air Control Parties or Forward Ground Commanders to communicate visually and direct airstrikes precisely and swiftly. Our smallest two piece IR pointing lasers were designed especially to be integrated into those limited space applications. This compact 150mW system has an impressive 39km effective range. If you have an application that requires field proven reliability and compact size then this laser will get the job done. Features: • Pinpoint Accuracy • Compact 150mW Two Piece Laser Head & Driver Design • Wide Operating Range -40 to +70C • Light Weight • Low Power Consumption • Easily Integrated • Low, High & Pulse Modes • Effective Range 39km • Optional Power & Divergence Configurations Available

MiniPoint Model Number: Output Power: Beam Divergence: Wavelength: Environment: NOHD: Power Requirements: Dimensions (Width x Length x Height): Weight: Effective Range:

PinPoint Model Number: Output Power: Beam Divergence: Wavelength: Environment: NOHD: Power Requirements: Dimensions: Weight: Effective Range:

424-UAV-103 Low: 55mW Higah: 95mW Pulse: 4 Pulses Per Second Typ. Major Axis 0.25 mrad=.014_ Minor Axis 0.15 mrad=.009_ 830nm Environmentally Sealed High Pwr. 333m 4.5VDC@ < 150mA 2.75”L x 1.25”W x 1.0”H 4 oz. 34km

428-UAV-100 Low: 75Mw High: 150mW Pulse: 4 Pulses Per Second Typ. Major Axis 0.25 mrad=.014_ Minor Axis 0.15 mrad=.009_ 830nm Environmentally Sealed High Pwr. 635m 4.5VDC@ < 300mA Laser Head: 1.5’L x Front Dia. .05” Laser Driver: 1.5”L x 1.1”W x .75”H 2.5 oz. 39km

UltraPoint The UltraPoint Infrared Laser provides precision confirmation of the targets of interest when activated from Air, Ground or Surface vehicles. This laser is observed by Tactical Air Control Parties or Forward Ground Commanders to communicate visually and direct airstrikes precisely and swiftly. This two piece IR pointing laser was designed especially to be integrated into sensor suites that need a brighter targeting spot but have limited space available. This compact 800mW system has an impressive 37km effective range. If you have an application that requires field proven reliability and flexibility that a two-piece system offers, then this laser is the one for your application. Features: • Precision Pointing Accuracy • Compact 800mW Two Piece Laser Head & Driver Design • Wide Operating Range -40 to +70C • Digital I2C Interface • Low Power Consumption • Easily Integrated • Low, High & Pulse Modes • Effective Range 37km • Optional Power & Divergence Configurations Available

308

UltraPoint Model Number: Output Power (Digital): Beam Divergence: Wavelength: Environment: NOHD: Power Requirements: Dimensions: Weigh: Effective Range: Head Office: 1-866-652-2877

West: (604) 526-1631

428-UAV-210-4 Low: 380mW High: 780mW Pulse: 4 Pulses Per Second Typ. Major Axis 1.1 mrad=.063_ Minor Axis 0.45 mrad=.026_ 860nm Environmentally Sealed High Pwr. 343m 28VDC Laser Head: 4.5”L x 1.7”W x 1.4”H Laser Driver: 3.0”L x 2.3”W x .7”H Laser Head: 4 oz. Laser Driver: 6 oz. 37km Prairies: 1-866-652-2877

East: 1-877-993-9968

Night Vision Night Vision by B.E. MEYERS UAV LASERS AeroMark The AeroMark Infrared Laser provides precision confirmation of targets of interest when activated from Air, Ground or Surface vehicles. This laser is observed by Tactical Air Control Parties or Forward Ground Commanders to communicate visually and direct airstrikes precisely and swiftly. This one piece infrared pointing lasers was designed especially to be integrated into Fighter Aircraft and UAV Sensor Suites. This compact 2.5W system has an impressive 30km effective range. If your program requires a higher power laser in a single package, proven reliability, ease of integration and customer power output/pulse mode control, then this laser is the one to use. Features: • Precision Pointing Accuracy • Compact 2.5W One Piece Laser Design • Wide Operating Range -40 to +70C • Light Weight • Low Power Consumption • Constant Current Custom Controlled Modes • Easily Integrated • Low, High & Pulse Modes • Effective Range 30km • Optional Power & Divergence Configurations Available

AeroMark Model Number: Output Power: Beam Divergence: Wavelength: Environment: NOHD: Power Requirements: Dimensions: Weigh: Effective Range:

428-UAV-227 High: 2.5W Typ. Major Axis 4.25 mrad=.244_ Minor Axis 1.75 mrad=.100_ 80nm Environmentally Sealed High Pwr. 269m 3.4 Amps Constant Current 4.2”L x 2.5”W x 1.0”H 13 oz. 30km

UltraMark Model Number: Output Power (Digital): Beam Divergence: Wavelength: Environment: NOHD: Power Requirements: Dimensions: Weigh: Effective Range:

428-UAV-400 Low: 1.8W High: 3.6W Pulse: 3 Pulses Per Second Typ. Major Axis 6.0 mrad=.344_ Minor Axis 5.0 mrad=.287_ 830nm Environmentally Sealed High Pwr. 54m 28VDC App. 4.5”L x 2.5”W x 1.0”H (Not Including Mounting Features) 1 oz. 25km

UltraMark The UltraMark Infrared Laser provides precision confirmation of targets of interest when activated from Air, Ground or Surface vehicles. This laser is observed by Tactical Air Control Parties or Forward Ground Commanders to communicate visually and direct airstrikes precisely and swiftly. This high power one piece infrared pointing lasers was designed especially to be integrated into Fighter Aircraft Sensor Suites. This compact 3.6W laser is B. E. Meyers highest power laser product which sports an impressive very bright spot with an effective range of 25km. This laser will easily overcome any artificial lighting condition to insure positive identification of any targets of interest. Features: • Precision Pointing Accuracy • Unrivalled Pointing Spot Brightness • Compact 3.6W One Piece Laser Design • Wide Operating Range -40 to +70C • Digital RS485 control Interface • Low, High & Pulse Modes • Effective Range 25km • Optional Power & Divergence Configurations Available

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

309

Night Vision Night Vision by B.E. MEYERS UAV LASERS

PrecisionPoint The PrecisionPoint Infrared Laser provides precision confirmation of targets of interest when activated from Air, Ground or Surface vehicles. This laser is observed by Tactical Air Control Parties or Forward Ground Commanders to communicate visually and direct airstrikes precisely and swiftly. This one piece IR pointing lasers was designed especially to be integrated into Fighter Aircraft and UAV Sensor Suites. This compact 800mW system has an impressive 35km effective range. If your program requires a single laser package with, proven reliability, ease of integration and simple control, ask us about this laser design. Features: • Precision Pointing Accuracy • Compact 800mW One Piece Laser Design • Wide Operating Range -40 to +70C • Light Weight • Low Power Consumption • Easily Integrated • Low, High & Pulse Modes • Effective Range 35km • Optional Power & Divergence Configurations Available

PrecisionPoint Model Number: Output Power: Beam Divergence: Wavelength: Environment: NOHD: Power Requirements: Dimensions: Weigh: Effective Range:

428-UAV-202-102 Low: 375mW High: 770mW Pulse: Customer Controlled Typ. Major Axis 1.25 mrad=.072_ Minor Axis .5 mrad=.029_ 860nm Environmentally Sealed High Pwr. 195m 4.5VDC @ < 1.5A 4.2”L x 2.5”W x 1.0”H 8.5 oz. 35km

AeroPoint Cobra & Apache lasers The AeroPoint Cobra & Apache lasers provide precision confirmation of targets of interest. This system is utilized by aircraft personnel to quickly and precisely mark their targets of interest. The Cobra & Apache laser has been founded upon our rugged IZLID 1000 laser design. You know have the proven reliability of the IZLID 1000 packaged into an airframe mountable laser system. This fully remote controllable laser offers features like: Field Replaceable Window and Eyesafe Training/Testing Filter. Features: • Precision Pointing Accuracy • External Mounting • Efficient 950mW One Piece Laser Design • Wide Operating Range -?C to +?C • Weapon Hardened for Vibration Resistance • Digital RS485 Control Interface • Low, High & Pulse Modes • Effective Range 43km • Field Replaceable Window • Eyesafe Training/Testing Filter • Optional Power & Divergence Configurations Available

310

AeroPoint Lasers for the APACHE and COBRA Helicopters Model Number: 428P-W/A & 428P-W Output Power: Low: 450mW High: 950mW Pulse: 4 Pulses Per Second Beam Divergence: Typ. Major Axis 1.1 mrad=.063_ Minor Axis 0.6 mrad=.003_ Wavelength: 860nm Environment: Environmentally Sealed NOHD: High Pwr. 620m Power Requirements: 12-30VDC Power Dimensions: 13.75”L x 2.7”W x 2.2”H x 1.7” Dia. Weight: 25 oz. (No Batteries Required) Effective Range: 43km

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Night Vision Night Vision by B.E. MEYERS Night Vision Systems Flash Hiders Accurately aimed fire at night, especially on automatic, is difficult due to the weapon flash obscuring your natural vision or blooming your night vision goggles. Eliminating your muzzle flash not only keeps your eyes on your target, but makes it more difficult for the enemy to locate you and return fire. B.E. Meyers manufactures a series of Flash Hiders, that conceals any visible flash from a M4 (5.56mm) to a M2HB .50 caliber machine gun. The Flash Hider eliminates virtually all visible flash produced by the weapon. This preserves the operator’s night vision thus allowing them to retain sight of the target during night shooting and delays or prevents detection of the operator’s position by the enemy.

Model Number: Caliber: Dimension Body Length: Body Diameter: Weight: Compliance: Color: Reduces Night Vision Signature: Optimal Adapters Available for Other Weapons: Effect on Accuracy or Cyclic Rate:

2300F .50”/12.7mm 8.75” (222.2mm) 1.87” (47.4mm) 2.216 lbs (1kg) 50 Caliber Weapon Dark Matte Grey Yes Yes No

Model Number: Caliber: Dimensions Body Length: Body Diameter: Weight: Compliance Color: Reduces Night Vision Signature: Optimal Adapters Available for Other Weapons: Effect on Accuracy or Cyclic Rate:

249F 5.56mm 2.75” (69.85mm) 0.865” (21.97 mm) 2.5 oz M249/M16/M4/5.56MM Weapons Dark Matte Grey Yes Yes No

Model Number: Caliber: Dimensions Body Length: Body Diameter: Weight: Compliance: Color: Reduces Night Vision Signature: Optimal Adapters Available for Other Weapons: Effect on Accuracy or Cyclic Rate:

240F 7.62mm 4.37” (111mm) 1.00” (25.4mm) 5.4 oz. M240/7.62MM Weapons Dark Matte Grey Yes M60, M14 & others No

Stealth Camera Systems: The Stealth 301 Day/Night Surveillance Camera combines a sensitive CCD with a laser diode illuminator to enable full 24-hr vision to ranges in excess of 1 mile. It provides color video during day surveillance and monochrome low light high resolution images during night application. The camera is equipped with an 18x optical zoom, allowing for identification or recognition of small objects from larger ranges. Customers include the U.S. Military, and foreign and domestic law enforcement, and DHS. The model # 301-3 and #301-4 Stealth Color Camera System utilizes light level sensing controlling the “Automatic Exposure Enhancement”. When power is applied, the light sensors will send signals to multiple micro-processors and buffer memories which select the correct exposure for the existing ambient light levels. As the light level diminishes, the exposure time will be increased to produce a perfect image of on the monitor while the same scene to normal eyesight will be noticeably darker. As total darkness descends, the camera will shift out of the color mode and into a highly sensitive black and white mode. At this time the camera optical path will also change and refocus for use with infrared illuminators. During this switch over period, any infrared illuminators will also be activated. As morning approaches and the light level increase, the camera will once again refocus and shift into the color mode for daytime surveillance as well as deactivate the infrared illuminators.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

311

Night Vision Night Vision by B.E. MEYERS Night Vision Systems OWL Pocket-Scope: The OWL is a Generation III night vision scope, with an integrated LED illuminator, enabling clear vision regardless of ambient lighting. The OWL can be equipped with either an ocular lens, allowing direct viewing the phosphor screen, or a CCD camera for recording of images. The customer base is comprised of domestic and foreign law enforcement, the Department of Homeland Security, often for surveillance of ports, and colleges and universities, for use on microscopes. This 3rd generation monocular pocket-scope is a standard mil-spec night vision device. Features: • Low “signal to noise” ratio • High photocathode sensitivity • Ruggedized aluminum body • B.E. Meyers patented “image guard” Damage Protection System • 20mW IR Illuminator effective out to 200 feet • Powered by either a single 1.5V AA battery or a 3V CR-123 Lithium battery. • Optional OWL IR Illuminators * 50mW IR illuminator which can fasten to the OWL housing * 100mW IR illuminator which can fasten to the OWL housing * D51: This IR illuminator is a 100mW device with a range out to 1 KM. * D50: This IR Illuminator is a 50mW device with an effective range of 250M-500M

Owl and Laser Illuminator

Prowler Pocket-Scope: The Prowler is a Generation III night vision scope with an integrated LED illuminator, enabling clear vision regardless of ambient lighting. The Prowler can be equipped with either an ocular lens, allowing direct viewing the phosphor screen, or a CCD camera for recording of images. The customer base is comprised of domestic and foreign law enforcement, the Department of Homeland Security, often for surveillance of ports, and colleges and universities, for use on microscopes. This 3rd generation monocular pocket-scope is a standard mil-spec night vision device.

312

Features: • Lower priced system with excellent performance • Commercial grade image tube • Medium photocathode sensitivity • Lower price range • Ruggedized aluminum body • B.E. Meyers patented “image guard” Damage Protection System • 20mW IR Illuminator effective out to 200 feet • Powered by either a single 1.5V AA battery or a 3V CR-123 Lithium battery. • Optional OWL IR Illuminators * 50mW IR illuminator which can fasten to the OWL housing * 100mW IR illuminator which can fasten to the OWL housing * D51: This IR illuminator is a 100mW device with a range out to 1 KM. * D50: This IR Illuminator is a 50mW device with an effective range of 250M-500M

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Night Vision Night Vision by B.E. MEYERS Night Vision Systems

R.I.S.T.A Kit Reconnaissance, Intelligence, Surveillance and Target Acquisition (RISTA) Kit: This kit consists of numerous individual pieces of specialized surveillance gear aimed to equip the operator with a flexible, all inclusive set of tools to provide digital video coverage from 25 meters out to 4 kilometers in any lighting condition. RISTA Kits are ruggedized to handle the rigorous demands placed on the modern surveillance community. These kits are being used globally to provide actionable realtime intelligence. The capabilities of the RISTA Kit are meeting the demands of the surveillance community, which means the difference between successful prosecution of the target and mission failure.

Features • Allows any camera to utilized for both day and night surveillance operations • Allows for effective long range surveillance and target acquisition

MOUT Camera MOUT Tracker Camera: The MOUT “Tracker” camera provides sensitivity never seen before in any low light CCD camera. The special ultra-low light sensitivity is attained by special processing of the video signal directly inside the CCD. The simultaneous use of in-frame and inter-frame video signal processing allows the camera to increase sensitivity up to 600 X. (An Amazing 0.00005lux) Features • Dual high intensity day color camera and a black and white night vision camera • Includes an internal 1064Nm low MW IR Illuminator for nighttime surveillances. The 1064nM is not visible to standard MIL spec Night Vision goggles

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

313

Night Vision Night Vision by B.E. MEYERS Night Vision Systems

PVS-7 Night Vision Goggles: Generation 3 night vision device commonly used by militaries worldwide. The system is binocular using a single Image Intensifier (I_) tube. These are standard U.S. military, head or helmet mounted PVS-7 Night Vision Goggles with Gen 3 I_ tube resolution, Automatic Brightness Control (ABC) for all light conditions. The PVS-7 goggle provides exceptional gain and resolution in the darkest conditions. Its single tube, bi-ocular design features Mil Spec optics and housing, user friendly controls, built-in IR illuminator, and internal low battery and IR indicators. Features • Low “signal to noise” ratio • High photocathode sensitivity • Diopter adjustment +2 to -6 • 40° Field of View • Battery operated – two AA • Operating temperature -51°C to 50°C

Modular Day / Night Sight (MDNS) The Mission: Seek and destroy heavily armed hostile forces deeply embedded within a civilian community. The Challenge: How to accomplish with minimum losses and minimum collateral damage. The Problem: Crew served weapons (e.g. M2, M240, M249) are very effective against enemy forces but the higher the caliber, the more difficult it is to get first and subsequent rounds on target which results in high collateral damage. To minimize losses armor shields (“chicken plates”) have been added to the weapons. These shields make it even more difficult to accurately and quickly aim the weapons. The Solution: The Modular Day / Night Sight (MDNS) is an integrated field mod solution for your crew served weapons that combines a day sight, a non-lethal laser, a green-beam aiming laser, an IR aiming / illumination laser, a white light, and a thermal weapon sight to provide a 24 hour all weather capability to detect, identify, deter, target, and destroy an enemy. The MDNS is a modular system and is configured to various unit, mission, or weapon requirements. Each component is optional but adds to the overall system effectiveness and ability to put first rounds on target very quickly. The lasers and lights are located forward of the shield while all components are controlled by remote controls located at the weapon grips to minimize soldier exposure. FEATURES: • Modular system with multiple optional components • Large view day sight with rapid adjust ranging • Hellfighter white light for M2 .50 cal HBMG • GLARE Non-Lethal Laser to deter approach • Visible green laser for weapon aiming • IR aiming and illumination laser • Remote controls on weapon grips • Flash hider virtually eliminates all weapon flash

314

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

NIGHT VISION

Night Vision by NEWCON OPTIK NVS 14 NIGHT VISION MONOCULAR / GOGGLES

Battle tested NVS 14 goggles can address any Military or Law Enforcement ability to observe the terrain under the darkest conditions. This model is in service with many militaries throughout the world. Extreme durability combined with unprecedented image quality support its impeccable reputation. Two monoculars can be easily attached together. This quick installation transforms the system into fully operational dual channel goggles/binocular with true stereoscopic vision. Two possible types of standard batteries add flexibility to the device usage in field environment. Large variety of available accessories allows the unit usage with different types of helmets, as a night vision video/camera attachment, as a riflescope or as a 3x magnification night scope with an additional add-on lens. The device is produced with either Gen. 2+ or Gen. 3 Image Intensifier Tubes. It utilizes standard ANVIS size tubes, thus allowing sourcing the tubes from several competing manufacturers. The newest NVS 14-3/HD is the first mass production 3rd generation goggles without US components.

Helmet Mount

NVS 14 Binocular

NVS 14/3X

Camera Adaptable

Weaver Mount

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

315

NIGHT VISION

Night Vision by NEWCON OPTIK NVS 7 SERIES OF NIGHT VISION GOGGLES Battle tested NVS 7 goggles can address any Military or Law Enforcement ability to observe the terrain under the darkest conditions. The goggles of this model are in service with over 40 militaries throughout the world. The large variety of available models allows the user to choose a variant that would satisfy his particular needs. Waterproof, lightweight, and compact - this advanced system is also the most affordable offer on the world market. NVS7-2/HD and NVS7-2/XT provide an unprecedented quality equivalent to 3rd generation models at much lower price. NVS7-3/HD is the first mass production 3rd generation goggles without US components. Thus, no US export restricting rules are in effect with this model. NVS 7-2/WA (Wide Angle) breaks the common conception of night vision goggle design. No more 'tunnel vision'! By using the advanced 25 mm tube we get 60 degrees Field of View that provides 2.5 times larger spatial angle (58% horizontal x 58% vertical) than a conventional 40 degrees design. In addition, NVS7 goggles can be supplied with 3x and 5x add-on lenses, which can be put on and taken off nearly immediately.

NVS 7-2

Laser Aimer LAM 10M

NVS 7 on helmet

Laser Aimer/Illuminator LAM 2IR

DN 510 / DN 562/563 DAY/NIGHT RIFLESCOPES (GEN. 2+, 3) APPLICATIONS • Night surveillance / Hunting • Patrol / Search & Rescue • Police / Law Enforcement / Military DN 510 on rifle

KEY FEATURES • Interchangeable day and night eyepieces maintain rifle's zero • Unique high quality specially designed day/night optics (F/2.0), ensuring: - Long range of vision (450-1000m) at low levels of light exposure and more than 100-250m for no-light situations with IR Illuminator - Effective use under star light (10-3 Lx) and night cloudy sky (10-4 Lx) - Wide field of view - Variable power - Wide range focus adjustment - Comfort of observation • Precision internal windage/elevation adjustments with tactile audible clicks and fine 1/4 MoA step • Water resistant • Optional IR Illuminator 75mW Night eyepiece IR Illuminator

Day eyepiece

316

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

NIGHT VISION

Night Vision by NEWCON OPTIK LASER AIMER MODULES LAM 2 / LAM 10M These unique infrared and/or visible instruments provide an instant laser-aiming dot for firing without eyesight strain. Fire adjustments (windage/elevation) are performed with a simple and reliable mechanism. Both Picatinny and barrel mounts are available. The units are waterproof and have a durable metal construction for maximum utility. LAM 10M 3A and LAM 2 utilize more powerful lasers that allow reaching 1-2 kilometers distance. LAM 2 modification provides additional scene illumination through infrared illuminating channel with variable dot size. The units meet full MIL-SPECS. Both models can be controlled from mode selector switch or remote control, which is fixed on the rifle with a Velcro tape in the place that is convenient for the shooter. The membrane type button allows momentary operations with the unit, so that the operator can turn it on only when it is really needed. This mode saves battery life and decreases the probability for the shooter to disclose himself to the opposite side armed with night vision devices. When LAMs are controlled from the mode switch only, the shooter keeps both hands free. This can be crucial in combat operations.

FEATURES

ACCESSORIES

• • • • • •

Full mil specs, waterproof Compact size, light weight Quick release mount (LAM 2 only) Windage/elevation adjustments Remote control (membrane type switch) 'Laser On' warning indicator

Case Weapon mount (exact type to be specified) Remote control Velcro tape Battery (optional) Allen wrenches (LAM 10M only)

LAM 10

LAM 2IR

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

317

NIGHT VISION

Night Vision by NEWCON OPTIK CLOSE RANGE LASER RANGEFINDER MONOCULARS LRM 1200 / LRM 1500 / LRM 1500SPD Close range Laser RangeFinder Monocular series comprises three models suitable for a wide variety of tasks from amateur hunting to sniper and artillery shooting. All devices in the line are manufactured in unified ergonomic lightweight case with rubberized grip. These advanced Laser Range Finder systems provide instant distance and speed (SPD modification) measurements consistently and accurately. Implemented optics allows a sharp, clear image under all conditions.

FEATURES 1 - Measurement result 2 - Units of measurement (yards, meters, KMH, MPH) 3 - Low battery indicator 4 - Over 100m indicator (optional) 5 - Laser active indicator 6 - Target quality indicator (optional) 7 - Reticle (cross or rectangular selectable)

CLOSE RANGE LASER RANGEFINDER BINOCULARS LRB 7X40 / LRB 7X50 Newcon Optik close range Laser RangeFinder Binocular family is manufactured in two different optics variants with identical electronics. Depending on objective lens size one can choose either compact 7 x 40 model or higher performance 7 x 50 model. These advanced Laser RangFinder systems provide instant distance measurements consistently and accurately. Superior glass multi-coated optics allows a sharp, clear image under all conditions. Therefore, there's no need to carry a separate binocular and rangefinder.

LRB 7X50

FEATURES 1 - Measurement result 2 - Units of measurement (yards, meters) 3 - Low battery indicator 4 - Over 100m indicator (optional) 5 - Laser active indicator 6 - Target quality indicator (optional) 7 - Reticle (cross or rectangular selectable)

LRB 7X40

318

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

NIGHT VISION

Night Vision by NEWCON OPTIK MEDIUM RANGE LASER RANGEFINDER MONOCULARS LRM 2000PRO / LRM 2500 / LRM 2500CI Medium range Laser RangeFinder Monocular family consists of three models in unified ergonomic lightweight case with rubberized grip. The models are identical in optics and vary in electronics. LRM 2000Pro has incorporated speed detector and consumer quality digital compass. LRM 2500CI has built-in high quality digital compass and inclinometer, which measures instantly height, azimuth, and elevation in addition to distance and speed. Computer output in LRM 2500/2500CI models provides immediate data acquisition by any system with standard RS-232 interface. Target selection logic and gating capability (LRM 2500/2500CI only) facilitate reliable measurements under unfavorable environmental conditions (bad weather, bushes, wires, etc.) FEATURES 1 - Measurement result 2 - Units of measurement (yards, meters, KMH, MPH, Mills, Degrees) 3 - Low battery indicator 4 - Over 100m indicator (optional) 5 - Laser active indicator 6 - Target quality indicator (optional) 7 - Reticle (cross or rectangular selectable)

MEDIUM RANGE LASER RANGEFINDER BINOCULARS LRB 3000PRO / LRB 4000CI

Medium range Laser Rangefinder Binocular family was designed using the latest achievements in optronics and electronics. LRB 3000Pro has incorporated speed detector and consumer quality digital compass. LRB 4000CI has built-in high quality digital compass and inclinometer, which measures instantly height, azimuth, and elevation in addition to distance and speed. Computer output in LRB 4000CI model provides immediate data acquisition by any system with standard RS-232 interface. Target selection logic and gating capability (LRB 4000CI only) facilitate reliable measurements under unfavourable environmental conditions (bad weather, bushes, wires, etc.)

LRB 3000PRO

LRB 4000CI with optional NVS 14 NV monocular LRB 4000CI

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

319

NIGHT VISION Night Vision by L3 COMMUNICATIONS THERMAL IMAGING CAMERAS X200XP The next generation of the world's smallest dual-use thermal imaging camera, the Thermal-Eye X200xp incorporates the industry's leading imaging technology and offers unmatched value at an affordable price. APPLICATIONS: • Target detection • Force protection • Routine patrols • Search & rescue • Disturbed surface • Covert surveillance • Fugitive pursuit • Soldier & officer training FEATURES: • Camera offers fast turn-on time and real-time video images. • 50% greater stand-off range than X100 predecessor to detect human activity at up to 450 meters away. • Sophisticated image processing for best-in-class image quality. • Rugged design with integral rubber eyecup can survive accidental drops & underwater submersion to 9 feet. • Pocket-sized, weighing only 13 ounces. • Operates on 2 AA alkaline or lithium batteries.

Breaking and entering

BENEFITS: • Greater scene detail with improved clarity, sharpness and overall image quality • Improved vision in challenging field conditions like dust, smoke and complete darkness with no blooming from ights • Fully dimmable display minimizes night blindness • Stows easily into pocket for quick extraction and covert operation in the field and on the run

Soldiers hiding in bushes

250D The Thermal-Eye 250D is the most widely produced handheld thermal imaging camera available offering Gold-Standard image quality. APPLICATIONS: • Covert surveillance • Search and rescue • Border patrol • Target detection • Force protection • Area and building sweeps • Fugitive pursuit

Armed fugitive in the woods FEATURES: • ‘Gold-Standard’ BST image quality with clear 320 x 240 resolution • Complete immunity to damage from solar radiation • Longest viewing range in its class detects human activity from over 900 meters with standard lens and up to 1800 meters with 150mm lens • 2X digital zoom • NTSC/PAL compatible output for video recording • High-capacity commercially available camcorder battery BENEFITS: • Greatly enhances vision at night or in challenging dust and smoke conditions • Operates with no light and without the blooming effect caused by other night vision technologies • Remain covert while still being able to see your target • Offers longer viewing range than traditional night vision technologies with a variety of lens selections • Saves money, time and lives with the ability to see quickly and operate more efficiently and safely

With natural light

With Thermal-Eye Breaking & entering

320

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

NIGHT VISION Night Vision by L3 COMMUNICATIONS THERMAL IMAGING CAMERAS 300D/2000B FEATURES

300D/2000B BENEFITS

‘GOLD-STANDARD’ IMAGE QUALITY

Absolutely the lowest spatial noise under the most challenging nighttime conditions, guaranteeing a clear image

IMMUNITY TO SOLAR RADIATION

BST is the only LWIR uncooled camera technology to be totally immune to direct solar exposure in any geographic location and for any length of time (no expensive filters required)

PLUG AND PLAY

Easily integrates with off-theshelf image processing software for 24/7 operations, and continuously updated image is never interrupted by a shutter sequence

WORLDWIDE VIDEO COMPATIBILITY INTEGRATION SUPPORT

300D / 2000B • Sealed package, long wavelength infrared camera core • Utilizes industry-leading Barium Strontium Titanate (BST) detector technology (320 x 240 pixel array) • Fully validated and fielded in military, fire, security, industrial and automotive applications

Provides standard NTSC or PAL video output

300D

ADDITIONAL 2000B FEATURES

ADDITIONAL 2000B BENEFITS

REAL-TIME SOFTWARE CONTROL

Using the 2000B kit and Control IR Manager software utility, camera NUC & pixel substitution can be updated on-site providing real-time updates and control

BUILT-IN CONFIGURABLE IMAGE PROCESSING

Enhance resolution and sensitivity via the RS-232 computer control interface

2000B

Leading-edge technical support

2400XP The Thermal-Eye 2400xp is the most widely produced dual sensor (visible and thermal imaging) camera that offers Gold-Standard thermal image quality for security applications. It is available as a fixed mount camera or with pan & tilt / slew to queue capability. APPLICATIONS: • Military • Law enforcement • Executive security • Covert operations • Residential • Industrial FEATURES: • ‘Gold-Standard’ BST image quality with clear 320 x 240 resolution • High-resolution, fully automatic CCD visible camera with 25X optical zoom and 12X digital zoom • Heavy-duty pan and tilt positioning system • Optional window wiper assembly available • Optional GUI software defines a region of interest, automatically detects motion and provides alarm for intruder alert(s) • Automatic or manual camera control through optional TTL & RS-232 communications GUI software • Thermostatically controlled heating and cooling weatherized enclosure w/ solar shield • Complete immunity to damage from solar radiation

Man in alley (Thermal/visible)

BENEFITS: • Provides full-motion and real-time day/night 24x7 video surveillance • Monitors full perimeter in darkness, any weather and over long distances • Detects intruders and protects assets with passive, non-intrusive technology • Eliminates need for enhanced light • Reduces energy costs • Saves time, money and resources while providing round-the-clock security and protection • Integrates easily with existing security infrastructure

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

Thermal view of truck

East: 1-877-993-9968

321

NIGHT VISION Night Vision by L3 COMMUNICATIONS THERMAL IMAGING CAMERAS 5000XP The Thermal-Eye 5000xp is a high performance pan/tilt thermal imaging camera for mobile applications in the security, law enforcement and maritime markets. The 5000xp is an upgrade from the popular Thermal-Eye 4000B and now features 320 x 240 resolution. APPLICATIONS: • Law enforcement • Security • Recreational Boating • Search & Rescue • Routine Nighttime Patrols • Nighttime Navigation FEATURES: • ‘Gold-Standard’ BST image quality with clear 320 x 240 resolution • Rugged, weather resistant pan/tilt housing • Enhanced 24º x 18º FOV, f/1.0 lens • Joystick controlled 360 degrees continuous pan, -20 degree/+180 degree tilt • Easily roof-mounted on any vehicle or marine craft • Video out for remote monitor or VCR • Complete immunity to damage from solar radiation BENEFITS: • Provides 360º pan/tilt capability to monitor surrounding environment • Observes suspicious activity from the safety of a vehicle or boat • Monitors full perimeter in darkness, any weather and over long distances • Spots potential criminal activity or safety hazards in complete darkness • Detects human activity up to 1500 feet away. With natural light

With Thermal-Eye

Party boat scene

With Thermal-Eye Motorcycle theft

322

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAFFIC EQUIPMENT & ACCESSORIES Traffic Slowers by PMG MANUFACTURING CROSSING GUARDIAN CROSSING GUARDIAN DEPLOYED WHEN NEEDED • neatly coiled strip allows unit to be placed on road • alerts traffic to slow down when needed • mobile case eases deployment of system PORTABLE DEPLOYMENT • allows a “buffer zone” from speed bump and pedestrians • eliminates maintenance problems associated with permanent speed bumps LAW ENFORCEMENT USE • small enough to fit in a trunk • can be used for “unexpected” traffic situations alerts traffic an officer is in the road ahead • easily carried to needed location, weighs only 25 lbs. REUSABLE • easily maintained • future upgrades available ONE YEAR UNCONDITIONAL WARRANTY

SPECIFICATIONS Key Design Features • Individual pads conform to various road surfaces and crown • Provides speed control when and where needed on a temporary basis. • Mobile case eases deployment and removal of speed bump from road surface. • Does not interfere with snow removal equipment. • Multiple methods of transportation to meet your individual needs. Construction Durable high-grade polypropylene plastic Dimensions Individual Pad 4” wide, 2 1⁄2”high, 8 3⁄4 long Basic SpeedBump Lengths 25 Pad single lane strip – 10’ long x 4” wide 50 Pad dual lane strip ----20’ long x 4” wide

Transport Cases (SB M1A) Single lane mobile cart 22 1⁄2” Wide x 23” High x 13” Deep (SB M2A) Dual lane mobile cart 29 1⁄2” Wide x 30” High x 13” Deep (SB M3A) (SB M4A) Hand truck cart 40” Wide x 35 1⁄2” High x 15 3⁄4” Deep (SB M5A) Single lane in soft carry case 21” Diameter x 9” Deep (SB M6A) Dual lane in soft carry case 27” Diameter x 9” Deep

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

Weight SB M1A SB M2A SB M3A SB M4A SB M5A SB M6A Warranty

80 Pounds 132 Pounds 51 Pounds 81 Pounds 30 Pounds 60 Pounds 1 Year limited warranty

6 Standard Models SB M1A - 10’ Single lane speed bump in a mobile case SB M2A - 20’ Dual lane speed bump in a mobile case SB M3A - 10’ Single lane speed bump with hand truck SB M4A - 20’ Dual lane speed bump with hand truck SB M5A - 10’ Single lane speed bump in soft carry case SB M6A - 20’ Dual lane speed bump in soft carry case

323

TRAFFIC EQUIPMENT & ACCESSORIES Tire Deflators by PMG ROADBLADE

ROADBLADE: PERIMETER PROTECTION The RoadBlade system is a tire slicing perimeter protection device with a cycle time of less than one second. It can be remotely activated either by together remote of up to 1,000 ft or a radio remote of up to 300 ft. In the passive mode vehicles can pass unharmed; once the threat vehicle approaches, the blades are activated up, closing down the entire road surface in both directions. Two to three inch gashes are introduced into each tire for immediate deflation down to the vehicle's rims. Each system can span a road distance of 25 ft.; RoadBlade is capable of connecting four systems to one junction box for multiple reaction. Each 20 inch module is able to withstand 52 tons of direct force. It can be mounted on top on the road or it can be placed in the road for a flush mount. Numerous accessory items are available to enable you to customize the RoadBlade system to meet your needs.

A STEP UP to meet today’s new security threat, increase location security. Security for factories in foreign Countries. Stopping the chase before it begins. A higher degree of security. Keep vehicles In or Out - A True No Pass System. CONSTRUCTION Polymer coated aluminum modules with hardened coated steel blades. BASIC SYSTEM 10 Feet in Length Contains: 6 - Blade Module 1 - Spacer Module 1 - Power Actuator 1 - 3-Button activation Control 1 - Portable Power Supply 1 - Mobile Cart

DIMENSIONS Individual Module Measurements: Length ------ 20 “ Width ------- 14” Height ------ 1 1/2” Individual Blade Measurements: Width ------- 3” Height -------3” Weight Each 5 blade Module ------ 17 lbs WARRANTY 1 Year Unconditional Warranty

Sub-Surface Flush Mount

Control Console

Stop / Go Light

Carrying Caddy loaded

324

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAFFIC EQUIPMENT & ACCESSORIES

Tire Deflators by PMG M.D.B.S.: TIGERTOOTH

FOR FACILITIES, THE PMG OPTION PROVIDING GREATEST OPERATOR FLEXIBILITY FOR GREATER: - SAFETY - SECURITY - PUBLIC CONVENIENCE

Blades lowered, both directions Traffic passes

Blades raised, both directions Operator determines that traffic is to be stopped in both directions

Blades lowered, one direction Traffic passes only in direction permitted by operator by remote control

M.D.B.S. - TIGERTOOTH Designed for the permanent or temporary deployment at checkpoints and gate entrances to selectively and instantly deflate the tires of the target vehicle. SPECIFICATIONS A step up to meet today’s new security threat, increase location security. Security for factories in Foreign Countries. A higher degree of security: Keep vehicles In or Out - A True No-Pass System! Stopping the chase before it begins! Construction Polymer coated aluminum modules with hardened coated steel blades. Basic System 10 Feet in Length RETRACTABLE BLADES Contains: • allows target vehicle selectivity 6 - Blade Module • immediately shreds all tires 1 - Spacer Module • bi-directional control of traffic flow - a no pass system 1 - Power Actuator 1 - 3-Button activation Control REMOTELY ACTIVATED 1 - Portable Power Supply • 30 feet with standard cable 1 - Mobile Cart • 150 to 200 feet with wireless remote control • can be activated inside a guard shack or outside Dimensions Individual Module Measurements: Length ------ 20 “ Width ------- 14” Height ------ 1 1/2” Individual Blade Measurements: Width ------- 3” Height -------3”

TIGERTOOTH: M.D.B.S. -MULTI-DIRECTIONAL-BLADE-SYSTEM

Weight

Eight exits on each side enable dirt and debris to escape from underneath.

Each 5 blade Module ------ 17 lbs

Warranty 1 Year Unconditional Warranty

Each basic M.D.B.S. system contains four modules. The main module body is powder coated to resist road corrosion. The main shaft and blades are stainless steel to resist road corrosion. The blades themselves are composed of 17-4PH stainless steel, annealed and aged to a hardness of R38 min.

PERIMETER PROTECTION • mounts on road surface or in ground • control traffic where needed • ideal for secured areas and checkpoints

Head Office: 1-866-652-2877

West: (604) 526-1631

Each individual module of the M.D.B.S. (Multi Directional Blade System) is 36 inches long, 12 inches wide and 23⁄4 inches high. The springs supply 8.8 pounds of force for each set of four blades. When retracted each blade sits flush with the module to allow vehicles to pass over unharmed. When activated blades are spaced 4 inches apart; vehicles will not be able to pass over them without damage to its tires from opposite direction of normal traffic flow.

Prairies: 1-866-652-2877

East: 1-877-993-9968

325

TRAFFIC EQUIPMENT & ACCESSORIES Tire Blowout Protection by RUNFLAT AMERICA CORP TYRON

WHAT IS TYRON? Every wheel is made with a recessed or drop center area called a "well." Without a well, it is impossible to fit a tire. When a tire deflates, air pressure no longer holds it in place on the wheel. It becomes FREE TO MOVE and the tire's beads can slip into the well of the wheel. The tire then flails on the smaller diameter of the well, resulting in a loss of driver control. Tyron® is attached to the wheel's well after the tire has been fitted; so in the event of a tire deflation it supports the tire, preventing it from slipping into the well. This significantly increases the stability, and therefore steering, cornering and braking control. SPECIFICATIONS • Fits to standard (single piece drop center) steel or alloy wheel and tire assemblies • A lightweight well-filler band that converts standard wheels into 'safety wheels' • Prevents tire flailing, minimizing the possibility of damage to adjacent vehicle components • Assists driver in maintaining steering, cornering, braking and traction control • Provides 'getaway' and short runflat capability

PERFORMANCE • TuV approved for 4km high-speed runflat • Off-road: Longer runflat with much enhanced traction • High speed capability (tested to 140 mph) • Best used with one tire fully deflated but useable with two tires deflated • For single piece drop center wheels from 14" diameter to 22.5" diameter

Tire Deflators by MDC THE WARTHOG

TACTICAL SURVEILLANCE DEVICE

HOW The WARTHOG is placed in front of, behind, or even on top the tire of a parked stolen vehicle during surveillance. When suspect drives away: - Very quick vehicle disablement and recovery. - No pursuit - No damage - The Warthog usually retrievable and reusable.

326

STOPPING PURSUITS... NOW! BEFORE THEY HAPPEN!

WHEN

WHO

The WARTHOG tactical uses: • Auto Theft • Drug Detail • Patrol • Surveillance • Tactical Situations

Tested by the Edmonton Police Service in Edmonton, Canada, the Warthog more than showed it’s worth by assisting in arresting repeat offenders who had records for police pursuits.

This miniature spike belt system helps reduce... • Injuries to Citizens and Police • Costly Damages to Civilian and Police Vehicles and Property • Law Suits Resulting from High Speed Pursuits ... while you are still affecting arrests and doing your job! • Works Independently from Other Spikebelt Systems • New on the Market • Small, Lightweight and can be Carried in a Vest or Shirt Pocket • Durable and Inexpensive • Concealable and Easy to use

Head Office: 1-866-652-2877

West: (604) 526-1631

The Warthog was developed by a 17 year veteran of the Edmonton Police Service to assist police agencies in their never ending quest to prevent police pursuits. THE WARTHOG Pins stick into the side for safe carrying

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAFFIC EQUIPMENT & ACCESSORIES Traffic Apparel by SEAM

IDENTITY PATCHES Back patch is 4" x 12-1/3". Front is 2" x 8". Police patches are coated to prevent colour of Reflexite bleeding - other patches can be coated on request. Customized wording is available.

TRAFFIC VEST 10 oz. Mesh or Nylon vest in fluorescent orange. 'X' on back, 2" Reflexite stripes back and front, adjustable sides. Dome snaps on front or Velcro closing. MT approved. CSE TV-102 CSE TV102L CSE TV-202 CSE TV-602

10 oz. Orange Mesh with Velcro 4" Longer than TV-102 Special Grid Orange Mesh with Velcro Orange Nylon with Velcro

Barricade Tape TAPE TENDER

BARRICADE TAPE

The new "Tape Tender" is a lightweight, compact, portable caddy that keeps rolls of barricade tape tidy and secure until needed. Using the attached safety cutting blade, the exact amount of tape can be dispensed, when and where it's needed. Such a smart idea!

Barricade Tape comes in rolls of 3" x 1000' - black ink on bright yellow tape unless otherwise specified. Customized messages are available upon request.

• • • • •

Dispenses 1000' rolls of 3" plastic barricade and identification tape quickly, safely and efficiently Lightweight, indestructible, polypropylene construction Steel safety cutting blade cuts fast and smooth Easy-fill, self-storing reel ends waste and snarl Can be used with any 3" or 2" plastic tape on 3" cores

One (1) Year Guarantee. Available with or without tape.

POLICE LINE DO NOT CROSS CSE-TT700 - English, french/eng.

FIRE LINE DO NOT CROSS CSE-TT600 - Black Ink on Yellow

CAUTION! DO NOT ENTER CSE-TT600 - Black Ink on Red

DANGER! DANGER! DANGER! CSE-TT500 - Black Ink on Red

DANGER! DO NOT ENTER CSE-TT550 - Black Ink on Red

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

327

TRAFFIC EQUIPMENT & ACCESSORIES Roadside Alcohol Detectors by P.A.S. P.A.S.® VR The P.A.S.® Vr. System is the latest portable breathe analyzer from Public Service Technologies. Inc. The innovative design allows the operator to switch between passive alcohol screening to direct alcohol breath testing with the flip of a switch. Pocket size, easy to use, designed to satisfy D.O.T. and zero tolerance specifications.

• • • • • •

D.O.T. Approved Single Button Control Direct or Passive Sampling Mode Heated Fuel Cell Visual Prompts Lightweight and Rugged

RF Interference:

SPECIFICATIONS Alcohol Detector: Specificity:

P.A.S. VR in both ACTIVE and PASSIVE modes

Colour Coded Display and Numeric Readout in % BAC Approximately 600 Tests per Nickel Hydride Battery (9 volt) or Rechargeable NiCad Passive Mode - turn it on, set to the passive mode. Press control button and quickly release, sample is automatically collected and processed. Active Direct Mode - turn it on, set active mode. Attach mouthpiece, subject blows, press control button, sample automatically collected and processed. "Sniffs" Breath and Open Containers or enclosed spaces for the presence of alcohol

Platinum electrochemical fuel cell Detector is unaffected by acetone, confections, methane and all other substances likely to be found in the human breath which would distort test results Accuracy: The P.A.S® Vr. is accurate to ± .055% BAC. Meets D.O.T. requirements at .020% BAC. Sampling System: Breath sampling taken during 4-8 second blow (reaching deep lung air) Disposable mouthpieces for sanitary direct testing Warm Up Time: approximately 30 seconds after initial turn on at temperatures of 15°C or more

Instrument is immune to high levels of radio frequency interference. Operating Temperature: 0°C (32°F) to 40°C (104°F) The fuel cell is automatically heated at lower temperatures. Display: Colour coded LED's and numeric readout Instrument Status: Five LED's indicate current status Dimensions: 2.75" (6.8cm) W x 4.6" (11.5cm) H x 1.5" (3.8cm) D Weight: Approximately 6.5 oz. (.2kg) Power Supply: 9 volt: Nickel Hydride Battery or Alkaline Battery or NiCad Rechargeable Calibration System: Wet Simulator U.S. Patent #5,055,268

ONE YEAR WARRANTY

SNIFFER P.A.S. III® VR

A Fuel Cell Based Passive Alcohol Sensor with a Built-in High Intensity Flashlight The P.A.S. III sensor is a non-invasive alcohol screening device. Combined with a functional flashlight, this instrument enables an operator to check a Breath Alcohol Level without a subjects active participation. • P.A.S. III can check any person, open container, or closed space for alcohol presence. • Powered by a rechargeable battery • Weatherproof design for use in any weather. • Left or right-hand operation. • Allows operator to carry out checks quickly and efficiently. • Subject needs only speak for about 4 seconds; P.A.S. III samples exhaled air from in front of the face. • Alcohol level shown by colour-coded display in seconds.

SNIFFER P.A.S. III® VR

EASY TO RECHARGE THE "AT-A-GLANCE" SYSTEM QUICKLY INDICATES THE STATUS OF ALL THE FUNCTIONS OF THE P.A.S. III

Plugs in Car 12 volts DC

Plugs in House Outlet or 120 vAC

328

PMP turns on while the pump is running to indicate how long to hold the PAS III steady

BAT starts blinking when the battery needs recharging

LGT turns on when the flashlight is on. It is great for day use.

HTR turns on and off as the fuel cell heater cycles. It indicates that the PAS III is operating at appropriate temperature.

SPECIFICATIONS Sensor: Specificity:

Electrochemical fuel cell generates a voltage in response to alcohol vapour Alcohol detector is unaffected by acetone, paint and glue fumes, foods, confectionery, methane and practically any other substance likely to be found in breath (other than alcohol) Power Supply: One 6. volt high power rechargeable battery with SmartCap™ recharger (included) Battery Capacity: Approximately 4 hours continuous use the PR 12 light (less with 4 watt halogen lamp) Temperature Range: 0° to 104°F (-18° to 40°C) Display: colour Coded, 10 element Led Bar Graph display Sample Time: 4 seconds Recovery Time: 2 Minutes: Significantly less if heater is activated (heater is activated when light is on) Dimensions: 13.9" L x 1.5" W (2.2" W at the head) Flashlight: Quartz halogen lamp (30,000 candlepower) Weight: with battery 2 lbs. Body: Anodized aircraft grade aluminum in grey or black Optional Extras: Calibration Kit Accuracy: Comparable to B.A.C. measurements under controlled laboratory conditions. Accuracy may vary in field use. Patented: U.S. Patent#5,055,268

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

TRAFFIC EQUIPMENT & ACCESSORIES Traffic Equipment by ACME WHISTLES BY ACME

477/58.5 THUNDERER Large whistle, tapered mouthpiece, medium tone. Same as 58.5 with adjustable finger grip and Mouth guard. NHL & CHL approved since 1917.

477/60.5 THUNDERER Small whistle with tapered mouthpiece produces high pitch. Same as 60.5 with adjustable finger grip.

P477 660 THUNDERER Same as 660 with adjustable finger grip

P558 THUNDERER Large size whistle with deep tone.

888B CYCLONE A traditional style whistle with a unique mid tone sound.

P577 THUNDERER Same as 558 with adjustable finger grip

•

VERY HIGH

•

SUPER HIGH SUPER HIGH LOW VERY HIGH

• • • •

•

• • • •

•

y gb

• • •

Wa t Ind er Sp oo ort r* s Be ach Sp ort s

•

• •

•

• • •

• • • • •

•

Fie l La d Hoc cro ke sse y/ Wr est ling

Ho cke y

• • • • •

•

• •

Ice

all So cce r

HIGH MEDIUM LOW LOW LOW LOW HIGH HIGH HIGH

•

P477 622 TORNADO

P22 TORNADO

Ba ske tb

all

Fo otb

• • •

So u

Av Fin ailab ge le rgr on ip

623 TORNADO Small whistle with tapered mouthpiece, high pitch with deeper discord for softer sound

60.5 THUNDERER Premium performance with a powerful high pitched tone.

59.5 THUNDERER Mid size whistle with tapered mouthpiece, medium to high pitch

560 THUNDERER Medium size whistle with high pitch

660 THUNDERER Small size whistle with high pitch.

Thunderers 60.5 59.5 58.5 477/58.5 558 577 560 660 477/660 Cyclone (Pealess) 888 Tornado (Pealess) T2000 477/2000 622 623

58.5 THUNDERER Large whistle with tapered mouthpiece, powerful medium pitched tone.

•

• •

• • •

•

• • • •

P622 TORNADO Square mouthpiece, bigger whistle. Medium high pitch with deeper discord for softer sound. Very loud but less harsh.

• •

• • •

T2000 TORNADO The extra high frequency of Tornado 2000 hits heights not reached by any other whistle. This higher pitch gives greater penetration and creates a crescendo of sound that cuts through even the greatest crowd noise.

477/T2000 TORNADO

•

All Thunderers are fitted with a waterproof suberin pea.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

329

VEHICLE ACCESSORIES

Vehicle Accessories by TUFLOC GUN LOCKS & RACKS FOR VEHICLES ELECTRICAL-MECHANICAL LOCKHEAD

EASY INSTALLATION. EASY ACCESS. NO HOLES.

Safety and security are emphasized in the design of the Tufloc electric lock with independent key backup. The dual-release lock, which holds the weapon in place, can be accessed with a key or by using the electric 8-second delay timer. The lockhead is supplied with or without the rack assembly and is keyed alike or differently. Master keying and handcuff key cylinders are also available.

• • • • • • • •

High Security Low Profile Easy Access Quick & Easy Installation Fits Any Rack System Accommodates All Weapon Models Unmatched Quality Adjusts To Fit Any Roll Bar

OVERHEAD MOUNTED WEAPONS RACKS The Tufloc overhead mounted racks give plenty of headroom for the driver and passengers while providing quick access. The rack is easily secured to a screen, roll bar, partition, or a ceiling using the Tufloc extension bar. The highstrength steel rack is coated with black wrinkle finish and padded for weapon protection and rattle-free performance. THE MOST ACCOMMODATING SYSTEM AVAILABLE!

ONE RACK, FOUR OPTIONS Based on interviews with hundreds of law enforcement professionals throughout the U.S., position is a personal preference when storing a weapon. This is why most Tufloc overhead racks accommodate four mounting positions. Most weapons can be stored with the muzzle facing the passenger side or driver side with the stock parallel to the ceiling or in a hanging position. Each rack allows the user to decide how the weapon will be secured.

Your job is difficult enough, that’s why Tufloc has made mounting any gun rack easy. Our high-security clamps mount to the roll bar with ordinary hand tools for quick and easy installation. No need to hassle with drilling holes. You’ll find Tufloc’s No-Drill Roll Bar Mount adjusts to accommodate any weapon rack system or roll bar configuration. Its sleek, low profile design provides unencumbered headroom and driver visibility. Complete the installation with a Tufloc rack system that delivers the unique flexibility of four mounting options. The unmatched security of a trigger guard and a delay timer with independent back-up key is also available.

Tufloc’s High-Security No-Drill clamps secure your weapon conveniently overhead. Clamps are simply tightened around the roll bar. Clamps are easily secured on both sides of the roll bar with ordinary hand tools. Tufloc’s gun rack system is then mounted onto the clamps. (Tufloc clamps adjust to fit any roll bar, weapon model or rack system.)

VEHICLE STORAGE BOXES TUFBOX Finally...a convenient place to store weapons, equipment and property in sport utility vehicles and vans. Tufloc has solved the problem of limited space in law enforcement vehicles. The solution... TufBox™, a locking drawer system that provides a way to secure weapons, store equipment and organize belongings to keep them safe and out of the way. Manufactured with a heavy-duty metal framework and 12- gauge steel sides, this unit is built to withstand the everyday demands that are expected of all Tufloc products. The TufBox™ mounts in the rear compartment. Models are available for most vehicles.

330

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES Gun Locks by TUFLOC

INDIVIDUAL GUN RACKS

QUAD RACK

Tufloc’s single weapon rack stores a wide variety of weapons and features Medeco® high security lock cylinders. When a weapon is locked into position, it is nearly impossible to remove it without rendering the gun useless. The individual weapon racks are available in heavy gauge steel, aluminum, stainless steel and non-magnetic models. An epoxy coating protects the weapon from nicks and scratches.

Tufloc Quad Racks provide central access control for up to four weapons. The racks provide visible and secure storage for a wide variety of weapons by employing a custom pocketing system (some pocket styles are shown right). Built using heavy-gauge steel and secured with the Tufloc proprietary locking system featuring Medeco® locking cylinders, these racks are useful in armories, offices, vehicles or anywhere weapons are required. Quad racks mount on walls or to floors using the optional floor stand (shown left). Other multi-gun systems are also available.

”SIX-PACK” PISTOL RACKS INDIVIDUALLY CONTROLLED HANDGUN STORAGE ”Six-Pack” pistol racks include universal handgun pockets with padded interiors to protect weapons. Each unit is individually lockable by the person to whom the weapon is issued. Units are available in 2-12 capacities

Vehicle Accessories by ALERTE VEHICLE LIGHTS

VISOR LIGHT & COVERT COVER QUICK MOUNT Alerte makes them in the USA and is proud to offer them. This unique light system has been designed from the ground up to be the most effective you will ever buy! From the power supply to the linear strobe tubes these lights are built to perform. No holes to drill to mount these lights, and they are so simple to install that you probably will leave your tool box on the shelf. Some of today’s vehicles are so blended that there is simply no place to fasten bolt-on lights. With an Alerte, QUICK MOUNT system, (a pair of Lights and a Quickfire power supply) you can locate and quickly secure one, or more, of these systems almost anywhere, even on motorcycle saddlebags. Add to this the incredible power of the strobe unit and you have the most flexible emergency lighting product on the market today. Once you have installed one of these systems you will wonder why you ever messed around with bolt-on lights!

Head Office: 1-866-652-2877

West: (604) 526-1631

• • • • • • • • •

Approximately 360 flashes per minute quad flash strobe Patented Halo Lenses available in red, blue, clear, green and amber Velcro straps for quick and secure visor mounting. 10 foot cable w/cigarette lighter plug Visor down - Switch ‘ON” and “GO”, Visor up - Out of sight Covert covers available in Police, Sheriff, Customs Compact size - only 5 x 12 inches and weighs only 16 ounces Also available in strobe/incandescent or dual incandescent Backed by Alerte’s iron clad guarantee

Prairies: 1-866-652-2877

East: 1-877-993-9968

MIRROR MOUNT STROBE LIGHTS

• • • • • •

Rated 25 watt tubes per side Field adjustable adhesive tape mount to match windshield slope above rear view mirror, or other window location Easily demountable form adhered clip for service 10 foot cable for easy routing Choice of red, blue, amber, or clear polycarbonate lenses Equipped with a foam anti-flashback shield which can be trimmed to match glass slope

331

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS

VEHICLE LIGHTS

12-V TEAR DROP

12-V HALOGEN PANCAKE

MINI LIGHT BAR

90 flashes per minute. Highly polished reflector. 10-foot coiled cord with cigarette lighter plug, mounting plate and vinyl backview shield. Available in Amber, Blue, Green and Red. 6-3/4" D x 5-3/8" W x 4-5/8" H.

Low-profile polycarbon-domed light gives 90 flashes per minute, boosted by an oversized, mirror-finished reflector. Comes complete with a 10-foot coiled cord with cigarette lighter plug, vinyl backview shield, mounting plate with velcro fasteners for dash mounting and a 60 lb. donut magnet. 4.6 amps. Available in Amber, Blue, Green or Red. 7-1/4" in diameter, 3-3/4" high. AAB01.0172 Halogen Pancake Uses #92.0797 Halogen bulb. 100 CP, 4.6 amps. AAB01.0173 Replacement Polycarbon Dome Amber, Blue, Green or Red. AAB01.0209 Extend-A-Bracket Not shown. Dash bracket designed for adapting small emergency lights to irregular or non-metallic dashboards. Adjustable from 8" to 10" long, and 5" wide. Fastens to windshield with adhesive backed mounting tape. AAB01.0233 Tri-Flector Designed to create a triple impulse on most dash lights. Includes velcro hook & loop fasteners for easy installation.

Dual rotating Mini Light Bar will deliver 180 flashes per minute. Available in Amber, Blue, Clear, Green and Red also Red/Clear and Red/Blue combinations. 16-1/8" W x 7-1/4"D x 4-1/4" H.

AAB01.0166 Incandescent Uses #92.1195 Incandescent bulb. 37.5 Watt, 3.4 amps. AAB01.0169 Halogen Uses #92.0795 Halogen bulb. 50 Watt, 4.4 amps. AAB01.0207 Replacement Polycarbon Dome Amber, Blue, Green or Red. AAB01.X209 Extend-A-Bracket Dash bracket designed for adapting small emergency lights to irregular or non-metallic dashboards. Adjustable from 8" to 10" long, and 5" wide. Fastens to windshield with adhesive backed mounting tape. AAB01.0233 Tri-Flector Designed to create a triple impulse on most dash lights. Includes velcro hook & loop fasteners for easy installation. AAB08.0308 Optional 3-Inch Magnet Base For use with mounting plate. Gives stronger mount where three-point mount might not hold.

AAB01.0233 Tri-Flector

AAB01.3266 Portable Incandescent Uses #92.1195 Incandescent bulbs, total 5.4 amps. Magnetic mounts with 10-foot cord and cigarette adapter plug. AAB01.3269 Portable Halogen Uses #92.0795 Halogen bulbs, total 7.9 amps. Magnetic mounts with 10-foot cord and cigarette adapter plug. AAB01.3466 Permanent Mount Incandescent Uses #92.1195 Incandescent bulbs, total 5.4 amps. AAB01.3469 Permanent Mount Halogen Uses #92.0795 Halogen bulbs, total 7.9 amps. AAB01.3470 Replacement Domes Specify lens colour.

AAB08.0308 Magnet Base

Standard Base

360° STROBE MINI LIGHT BAR

ADD 360- PERMANENT FLUSH PIPE MOUNT STROBE

LOW PROFILE STROBE LIGHT

12-volt, 360° strobe on either a magnetic portable mount or permanent mount base produces 480 flashes per minute. Available in Amber, Blue, Clear, Green, Red, Clear/Red or Clear/Blue.16-1/8"W x 7-1/4"D x 4-1/4" H.

360° strobe on permanent flush / pip mount base, produces 60 double flashes per minute. 20 Watt. Available with 3, 4, or 6 inch lens. Specify colour - Amber, Blue, Clear, Green, Red or Purple (Purple not available in 3”) Also available in quad flash.

AAB24.0320 Low Profile Strobe Light 12-volt DC light produces 60 double flashes per minute with an output of 15 joules while drawing less than 1.5 amps. Performs in temperature ranges of -40°F to 140°F. Specify colour - Amber, Blue, Clear, Green or Red.

AAB23.0360 Portable Mount AAB23.1360 Permanent Mount AAB22.0263 Replacement Bulb AAB90.6252 Replacement Inner Lens

332

AAB22.7334 double flash AAB22.7334 quad flash

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS VEHICLE LIGHTS

AAB24.0816 AAB24.0616

AAB24.0614

360° ROTO BEACON

360° MAGNETIC BASE STROBE

360° PERMANENT MOUNT STROBE

60 flashes per minute, while sealed-beam bulbs (#93.7400) project an elongated beam with sharp cutoff. Zinc dichromate finish, neoprene dome gaskets for positive weather seal and quick-snap spring-loaded dome latch. No-tool bulb installation. Specify lens colour - Amber, Blue, Clear or Red. 8-1/2" in diameter, 8" high.

12-volt, 360° strobe on a 90 lb. magnetic base produces 60 quad flashes per minute with an output of 19.2 joules on the first flash and 9.6 on the second, for a total of 19.2 joules. With a low profile of just 4-1/2" overall height, and a 5" diameter, it's perfect for dashboard mounting. Complete with a 12-ft. coiled cord, heavy-duty cigarette lighter plug, vinyl cover and steel mounting plate for easy dash mounting. Available in Amber, Blue, Clear, Green, Purple or Red.

12-volt, 360° permanent mount strobe. High impact lexan lens mounted on spun aluminum base. Available with 3, 4, or 6 inch lens. Specify colour - Amber, Blue or Clear, Green or Red or Purple.

AAB01.4421 2-Light Model Incandescent sealed beam bulbs (#93.7400). AAB01.4422 Halogen Model Same as #01.4421 but with Halogen bulbs (#93.H7600). AAB01.4443 Compact 4-Light Incandescent (#93.7400) 4-light Beacon. Compact housing. Fuel efficient. 120 flashes per minute. AAB01.4444 4-Light Halogen Same as #01.4443 but with Halogen bulbs (#93.H7600). AAB01.4121 Self-Leveling Mounting Bracket AAB01.4141 Post Mount AAB01.4445 Replacement Domes Available in Amber, Blue, Clear or Red.

Stud Mount

4 Tab Mount

AAB22.0254 Magnetic Base Strobe AAB22.0263 Replacement Bulb

Brush guard for 4-tab

360° PERMANENT STUD MOUNT STROBE 12-volt, 360° strobe on a permanent-mount base produces 60 quad flashes per minute with an output of 9.6 joules on the first flash and 9.6 on the second, for a total of 19.2 joules. High-impact lexan lenses are mounted on tough polycarbon bases with rubber gaskets. Choice of Amber, Blue, Clear, Green or Red. Both tab and pipe mounts are available.

AAB22.0234 Stud Mount 2-1/4" base with compact 4" high lens. 5" in diameter. Centre bolt mount. Pipe mount available. AAB22.0236 Stud Mount 2-1/4" base with compact 6" high lens. 5" in diameter. Centre bolt mount. Pipe mount available.

AAB22.0244 4-Tab Mount 1-3/8" high base, four (4) mounting tabs, 4" high lens. 5" in diameter. AAB22.0246 4-Tab Mount 1-3/8" high base, four (4) mounting tabs, 6" high lens. 5" in diameter. AAB22.0102 Brush Guard for 4-tab

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

AAB24.0614 60 quad flashes per minute. Low profile. AAB24.0616 60 quad flashes per minute. Standard profile. AAB24.0816 60 quad flashes per minute. High profile. AAB22.0263 Replacement Strobe Tube

AAB04.0345

THIN LIGHTS 04.0345 Incandescent 4-1/4" diameter, zinc, die-cast single-faced signal light with a #92.1156 bulb. Baked-on aluminum finish will not rust. Snap-grip lens and rubber "O" ring gasket eliminates lens screws. Available in Amber, Blue or Red. AAB04.0346 Halogen Same as above but with 35 watt Halogen bulb #92.0796. AAB04.0343 Thin Light Kit - Incandescent 90 flashes per minute. Kit contains: Two (2) each #04.0345 Incandescent lights One (1) #04.0330 switch/fuse/flasher assembly. AAB04.0344 Thin Light Kit - Halogen 90 flashes per minute. Kit contains: Two (2) each #04.0346 Halogen lights. One (1) #04.0330 switch/fuse/flasher assembly.

333

VEHICLE ACCESSORIES

Vehicle Accessories by ABLE 2 PRODUCTS VEHICLE LIGHTS

STROBE LIGHT KIT PAR-36

TRUNK LIGHT KIT

STROBE LIGHT KIT PAR-48

AAB27.7740 Light Kit comes complete with 2 ea. Par-36 strobe bulbs, unbreakable polycarbon lenses installed i shock absorbing, weather proof rubber housings on adjustable mounting brackets. Switch, power supply and all necessary wiring included. Comes in Amber, Blue, Clear, Green or Red.

This kit allows emergency vehicles to be seen from the rear when the trunk lid is opened. A built-in Mercury switch activates a pair of alternating flashing lights as the trunk lid opens

AAB27.7616 Light Kit comes complete with 2 chrome plated housings mounted on adjustable mounting brackets. Switch, power supply and all necessary wiring included. Comes in Amber, Blue, Clear, Green or Red.

AAB27.7713 Replacement bulb AAB17.0845 Replacement lens

AAB04.0353 Incandescent Trunk Light Kit Includes two Incandescent lights, one switch/fuse/ flasher assembly with a built-in Mercury switch and two "L" brackets for mounting. 90 flashes per minute. Available in Amber, Blue or Red. AAB92.1156 Replacement Bulb AAB04.0354 Halogen Trunk Light Kit Same as the #04.0353 but with two Halogen lights. AAB92.0796 Replacement Bulb

AAB27.7714 Replacement bulb AAB17.0848 Replacement lens

AAB20.7110

MICROTHIN RECTANGULAR STROBE LIGHTS INTERIOR USE AAB20.1656 Same as model 20.1655 except for interior use only. Small enough for dash or deck mounting. Also great for mounting around the rear view mirror area. Each light has a 20 watt maximum strobe tube that is easily replaced by removing a single screw. Comes complete with mounting bracket and 15 ft. cable. Available in Amber, Blue, Clear or Red lens. Power supply sold Separately. 6 1/4”W x 2 3/8”H x 2 1/2”D AAB20.1660 Replacement strobe tube

RECESSED STROBE KITS AAB20.7110 Strobe lights quad flash 60 times per minute per bulb. Lexan housing an lens are sonic welded. Rear entry replacement strobe tube and rubber gasket makes housings water resistant. Kit includes two oval housings with replaceable strobe tube, grommets power supply, switch, fuse and all necessary wiring. Specify colour: Amber, Blue, Clear, Green, or Red.

MICROTHIN RECTANGULAR STROBE LIGHTS EXTERIOR USE AAB20.1655 Exterior microthin lights emit a wide angle, high intensity beam that identifies all types of emergency vehicles in any weather condition. Each light has a 20 watt maximum strobe tube that is easily replaced by removing a single screw. Comes complete with mounting bracket and 15 ft. cable. Available in Amber, Blue, Clear or Red lens. Power supply sold Separately. 6 1/4”W x 2 3/8”H x 2 1/2”D AAB20.1660 Replacement strobe tube

AAB20.7115

AAB20.7115 Includes recessed black steel housing with replaceable strobe tube, power supply, switch, fuse and all necessary wiring. Also available in stainless steel. Specify colour: Amber, Blue, Clear, Green, or Red.

334

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS VEHICLE LIGHTS

STROBE STAINLESS STEEL GRILLE LAMP KIT Strobe lights quad flash 60 times per minute per bulb. Power supply operates from 10 - 30 volts producing a 20-watt output. Stainless steel housings with your choice of Amber, Blue, Green, or Red lenses. Comes complete with power supply, switch, fuse, all necessary wiring, and bumper mounting brackets. 1.8A at 12V (also available in halogen). AAB20.7175 Strobe Grille Lamp Kit AAB20.7276 Replacement Lenses AAB20.7279 Strobe Tube-reflector Assembly

STROBE BLACK LOUVERED STEEL GRILLE LAMP KIT Strobe lights quad flash 60 times per minute per bulb. Power supply operates from 10 - 30 volts producing a 20-watt output. Black Louvered housings with your choice of Amber, Blue, Green, or Red lenses. Comes complete with power supply, switch, fuse, all necessary wiring, and bumper mounting brackets. 1.8A at 12V (also available in halogen). AAB20.7176 Strobe Grille Lamp Kit AAB20.7276 Replacement Lenses AAB20.7279 Strobe Tube-reflector Assembly

NO-SHO CONCEALED COLOUR STROBE KIT Strobe lights quad flash 60 times per minute per bulb. Power supply operates from 10 - 30 volts producing a 20-watt output. Stainless steel housings with your choice of Amber, Blue, Green, or Red lenses. Lights are clear when off, change to colour when activated. Comes complete with power supply, switch, fuse, all necessary wiring, and bumper mounting brackets. 1.8A at 12V (also available in halogen). AAB20.7178 AAB20.7278 AAB20.7279 AAB20.7177

Strobe Grille Lamp Kit Replacement Lenses Strobe Tube-reflector Assembly Same as 20.7178 only with black housings and no bumper mounts

AAB10.0878

HALOGEN GRILLE KITS AAB10.0875 Coloured Lens Kit Halogen light kit with coloured lenses. Complete with a Tridon electronic #10.0813 flasher/fuse/switch assembly and two (2) bumper mounting brackets (#10.0870). Choose Amber, Blue, Clear, Green or Red lenses. Please specify colour choice when ordering. AAB10.0874 Coloured Lens Kit Same as #10.0875 but with a #17.0537 Wagner flasher. No bumper mounts.

10.0876

AAB10.0876 Coloured Lens Kit Same as #10.0875 but with black louvered steel housing. No bumper mounts. AAB10.0873 Coloured Lens Kit Same as #10.0874 but with a black louvered steel housing. No bumper mounts. Choose Amber, Blue, Clear, Green or Red lenses. Please specify colour choice when ordering. AAB10.0860 Coloured Replacement Lens Please specify Amber, Blue, Clear, Green or Red. AAB92.12336 Replacement Bulb 12-volt, 55 watt, 4.3 amp standard. Other voltages available.

Head Office: 1-866-652-2877

West: (604) 526-1631

NO-SHO CONCEALED COLOUR LIGHT KITS Whether driving undercover or just out with the family, No-SHO concealed colour lights are the solution. They appear like clear driving lights until the switch is flipped, then they become powerful warning devices. Kits produce 90 flashes per minute. Available in Amber, Blue, Green or Red. Please specify colour when ordering. AAB10.0878 NO-SHO Concealed Colour Light Kit Set of two (2) stainless steel housings with Halogen bulbs and NO-SHO concealed colour lenses. Tridon electronic flasher/fuse/switch assembly and two (2) bumper mounting brackets. AAB10.0868 NO-SHO Concealed Colour Light Kit Single stainless steel lamp with concealed colour lens. AAB10.0877 NO-SHO Concealed Colour Light Kit Same as #10.0878 but with black louvered steel housing and without bumper mounting brackets. AAB10.0867 NO-SHO Concealed Colour Light Kit Single black louvered lamp with concealed colour lens. AAB10.0861 Replacement Concealed Colour Lens Please specify Amber, Blue, Green or Red.

Prairies: 1-866-652-2877

East: 1-877-993-9968

MICROTHIN RECTANGULAR HALOGEN LIGHTS 12 volts Exterior or Interior Exterior or interior microthin lights emit a wide angle, high intensity beam that identifies all types of emergency vehicles in any weather condition. They are easily mounted on grilles, and allow a clear field of vision when deck mounted. Each compact light has a halogen bulb that is easily replaced by removing a single screw. Comes complete with 2 lights, mounting brackets and 15 ft. shielded cables. Standard 4-amp bulbs included. Available in Amber, Blue, Clear or Red lens. Power supply sold Separately. AAB10.1255 Exterior Microthin Halogen Light Dimensions: 6 1/4”W x 2 3/8”H x 2 1/2”D AAB10.1256 Exterior Microthin Halogen Light Dimensions: 6 1/4”W x 2 3/8”H x 2 1/2”D AAB92.12336 Replacement Halogen Bulb

335

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS VEHICLE LIGHTS HALOGEN GRILLE LAMPS

AAB10.0865

AAB10.0866

AAB10.0864

AAB10.0892

AAB10.0865 Stainless Steel Quartz Halogen Lamp The #10.0865 features a brighter Halogen bulb encased in a stainless steel housing with lens. Complete with adjustable permanent mounting bracket. H3, 55 watt, 12-volt bulb. Available in Amber, Blue, Clear, Green or Red. please specify lens colour. AAB10.0866 Black Louvered Steel Housing Same as #10.0865 but with black louvered steel housing. 55 watt, 12-volt bulb. Available in Amber, Blue, Clear, Green or Red. Please specify lens colour when ordering. AAB10.0864 Black Steel Housing Same as #10.0866 but without black louvers. Black powder coated matte finish. AAB10.0860 Replacement Lens Available in Amber, Blue, Clear, Green or Red. Please specify colour. AAB92.12336 Replacement Bulb 12-volt, 55 watt, 4.3 amp standard. Other voltages available.

HALOGEN ALLEY LIGHT KIT 10.0892 Stainless Steel Set of two (2) stainless steel housings with adjustable mounting brackets, H3 Halogen 12-volt bulb, lighted rocker switch, in-line fuse, wiring and "L" brackets. AAB10.0893 Black Louvered Housing Same as #10.0892 but with black louvered steel housing. AAB92.12336 Replacement Bulb 12-volt, 55 watt standard. Other voltages available.

AAB10.0893

FLASHING COLOURED HALOGEN INSERT KIT Flashing Coloured Halogen Insert Kit includes two (2) coloured bulbs, two (2) sockets, switch and choice of flasher with all necessary wiring. Please specify bulb colour: Amber, Blue or Red. Kit can be used in headlights, tail- lights, back-up lights, parking lights and cornering lights. 12-volt, 50 watt, 3.9 amps.

AAB10.1016 Heavy-Duty Alternating Flasher Kit Contains #17.0537 flasher. AAB10.1018 Electro-Mechanical Flasher Kit Contains #10.0813 flasher. AAB10.1020 100% Solid State Flasher Kit Contains #03.0132 flasher. AAB10.0795A Amber Bulb AAB10.0795B Blue Bulb AAB10.0795R Red Bulb AAB10.3761 Socket

ALTERNATING FLASHING LIGHT KITS Alternating flashing light kit comes complete with two (2) PAR-36 (4-1/2") sealed-beam bulbs, unbreakable polycarbon lenses installed in shock-absorbing, weather-proof rubber housings on adjustable mounting brackets and switch/fuse/Wagner flasher assembly. All necessary wiring for easy installation is included. Specify lens colour - Amber, Blue, Clear, Green or Red. Other voltages and bulbs available. AAB17.0842 Spot Bulb Please specify lens colour - Amber, Blue, Clear, Green or Red. #93.4416 bulb, 30 watt, 2.3 amps. AAB17.0843 Faceted Bulb Please specify lens colour - Amber, Blue, Clear, Green or Red. #93.4411 bulb, 35 watt, 2.7 amps. AAB17.0537 Wagner Flasher

336

AAB17.0845 Polycarbon Lens Unbreakable lens shield to protect bulbs from rocks. Choice of Amber, Blue, Clear, Green or Red. AAB17.0846 Rubber Housing Housing only, with ground wire and mounting bracket. AAB17.0849 Switch/Fuse/Flasher Switch-fuse assembly with #17.0537 Wagner flasher with 8-ft. and 12-ft. wires.

Head Office: 1-866-652-2877

ALTERNATING FLASHING LIGHT SETS Set includes two (2) PAR-36 (4-1/2") sealed-beam bulbs covered by a polycarbon lens shield encased in a shockabsorbing, weatherproof rubber housing with a Wagner alternating flasher. Complete with adjustable mounting bracket. Available in singles or pairs - with or without flashers and your choice of lens colours - Amber, Blue, Clear, Green or Red. Lights may be mounted behind the grille as well as in the back window. Fully adjustable bracket mounts easily on virtually any contour. AAB17.0840

West: (604) 526-1631

AAB17.0840 Spot Bulb Please specify lens colour. #93.4416 bulb, 30 watt, 2.3 amps. AAB17.0841 Faceted Bulb Please specify lens colour. #93.4411 bulb, 35 watt, 2.7 amps. AAB17.0537 Wagner Flasher

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS VEHICLE LIGHTS HIDE-A-FLASH STROBE KITS The Hide-A-Flash lamp emits a brilliant burst of light for effective vehicle identification and tracking in any weather 40 WATT, 4-OUTLET KIT

condition. Our convenient kits include everything you need to convert a standard vehicle into an emergency vehicle. Red, blue, amber and green bulbs are available at an additional cost. Optional switches and hole saws available.

40 WATT, 4-OUTLET KIT

AAB21.4402 (1) 4-outlet power supply (2) 15 foot shielded cables (2) clear strobe tubes

AAB21.4404 (1) 4-outlet power supply (4) 15 foot shielded cables (4) clear strobe tubes

60 WATT, 6-OUTLET KIT

AAB21.6600 1 6-outlet power supply 4 15 foot shielded cables 4 clear strobe tubes

20 WATT, 2-OUTLET KIT

60 WATT, 4-OUTLET KIT

AAB21.6200 (1) 2-outlet power supply (2) 15 foot shielded cables (2) clear strobe tubes

120 WATT, 8-OUTLET KIT

80 WATT, 4-OUTLET FLASH KIT

AAB21.6800 1 8-outlet power supply 4 15 foot shielded cables 4 clear strobe tubes

Random Flash Kit AAB21.8422 (1) 4-outlet 80 watt random flash power supply (2) 15 foot shielded cables (2) Exterior Microthins w/cables (2) clear strobe tubes

AAB21.6400 (1) 4-outlet power supply (4) 15 foot shielded cables (4) clear strobe tubes

80 WATT, 4-OUTLET KIT

Random Flash Kit AAB21.8440 (1) 4-outlet 80 watt random flash power supply (4) 15 foot shielded cables (4) clear strobe tubes

ALL PURPOSE EMERGENCY WARNING LIGHT Note: When ordering, state model number and 4-code suffix from below. For example, to order a 4" lens, magnetic mount with amber lens, Incandescent bulb, flash type with a 1-ft. cord, the order number would be 04.2254.AIFX.

12-volt, 360° flashing light produces 90 flashes per minute. High impact lexan lenses are mounted on tough polycarbon bases. Your choice of permanent or magnetic mount. Lights come in either halogen or incandescent. AAB92.0795 Replacement Halogen Bulb AAB92.1195 Replacement Incandescent Bulb Lens Colour A Amber B Blue C Clear G Green B Red

Bulb Type H Halogen (#AAB92.0795) I Incandescent (#AAB92.1195)

Head Office: 1-866-652-2877

Flash/Steady F Flash (with #552 flasher) S Steady Burn

West: (604) 526-1631

Cord X 1-ft. 1 12-ft. w/ cap 3 12-ft. coiled Cord w/cap

Prairies: 1-866-652-2877

4" Lens 6" Lens

STUD MOUNT

4-POINT

MAGNETIC

AAB04.2234 6 1/8” x 6 1/8” AAB04.2236 6 1/8” x 8 1/8”

AAB04.2244 8” x 5 1/4” AAB04.2246 8” x 7 1/4”

AAB04.2254 5 1/4” x 4 3/8” AAB04.2256 5 1/4” 6 6 3/8”

East: 1-877-993-9968

337

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS VEHICLE LIGHTS EMERGENCY SCENE LIGHTS The new PAR-46 Pivoting Spotlight will fill the void in your equipment list. Pivot the housing to any of 170째 angles. The large size PAR-46 bulb is available in a choice of spot, flood or spot/flood combination to fit most demanding situations. The chrome-plated brass housing is mounted on a choice of permanent base (wired directly into vehicle wiring) or on a powerful 90 lb. magnet with a cigarette lighter plug. The cord provided is straight, but a coiled cord is also available. PERMANENT MOUNT: AAB16.0550.0000 Housing only without bulb. AAB16.0550.4007 Pivoting light with Spot/Flood #4007 bulb. AAB16.0550.4435 Pivoting Light with Spot #4435 bulb. AAB16.0550.H7635 Pivoting light with Spot Halogen #H7635 bulb.

MAGNET BASE WITH 12-FT. STRAIGHT CORD: AAB16.0560.0000 Housing only without bulb. AAB16.0560.4007 Pivoting light with Spot/Flood #4007 bulb. AAB16.0560.4435 Pivoting light with Spot #4435 bulb. AAB16.0565.H7635 Pivoting light with Spot Halogen #H7635 bulb. AAB16.1350SL REMOTE CONTROL SEARCHLIGHT Not shown. 12-volt DC, 50 watt, 3.6 amps, 100,000 CP. This searchlight has a tough weather and corrosion resistant white thermoplastic construction housing with a GE #H-9405 sealedbeam Halogen bulb that produces dusk-to-dawn piercing light. 320째 rotation vertical sweep. Integrally molded clutch design allows the light to be operated against limit stops without damage. New easy-fit black control is designed to compliment instrument panel and is fitted with a fused ON/OFF switch and an 8-way directional switch for precise beam control. Complete with 15-ft. cable. All mounting hardware is stainless steel. AAB93.H9405 Replacement Bulb

MAGNET BASE WITH 12-FT. COILED CORD: AAB16.0563.0000 Housing only without bulb. AAB16.0563.4007 Pivoting light with Spot/Flood #4007 bulb. AAB16.0563.4435 Pivoting light with Spot #4435 bulb. ABB16.0563.H7635 Pivoting Light with Spot Halogen #H7635 bulb.

VEHICLE LIGHT ACCESSORIES STROBE POWER SUPPLIES

Power Supply Features

Volts

AMPS 12v/24v

Input Watts

Output Watts

High/ Low Intensity

Polarity Protection

No. of Pattern Modes

Primary Warning Patterns

Dimensions

21.7220

10-30

1.9/1.0

YES

61/2 x 33/4 x 21/4

21.WP7220

10-30

1.9/1.0

YES

61/3 x 33/4 x 21/4

21.7360

10-30

5.5/2.6

YES

61/2 x 51/2 x 21/2

21.7440

10-30

3.75/2.0

YES

61/2 x 51/2 x 21/2

21.7460

10-30

5.5/2.6

YES

61/2 x 51/2 x 21/2

21.7480

10-30

7.75/4.0

100

YES

61/2 x 51/2 x 21/2

21.7660

10-30

5.5/2.6

YES

61/2 x 51/2 x 21/2

21.7680

10-30

7.75/4.0

YES

61/2 x 51/2 x 21/2

21.78120

10-30

11.0/5.2

150

120

YES

10 x 6 x 21/4

21.78185

10-30

18.0/9.0

230

185

YES

10 x 6 x 21/4

21.712185

10-16

18.0/--

230

185

YES

10 x 6 x 21/4

338

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES

Vehicle Accessories by ABLE 2 PRODUCTS 100% SOLID STATE FLASHERS BRAKE LIGHT/BACK-UP LIGHT FLASHER

BRAKE LIGHT/BACK-UP LIGHT FLASHER

AAB03.0116 100% solid state flasher designed to alternately flash back-up lights and brake lights. Uses builtin diodes to protect the vehicle's anti-lock brake system. 60 alternating flashes per side per minute. Great for unmarked vehicles because of its undercover design. A must for marked vehicles when the open trunk lid blocks the light bar at an accident scene.

AAB03.0116R Solid State relay driven flasher with terminal strip designed to alternately flash back-up lights and brake lights. Great for unmarked vehicles because of its undercover design. 60 flashes per side per minute. 12 Volt. Load: 8 amps per side. Special flash rates available.

AAB03.W116 Complete with 2 feet of 16 GA and 14 GA power wire

HEADLIGHT FLASHER WITH HIGH BEAM OVERRIDE AAB03.0124 With high beam override. Use your existing headlights with this flasher. Override allows you to stop high beams flashing by simply using the high/low beam switch. 60 flashes per side per minute. AAB03.W124 Complete with 2 feet of 16 GA and 14 GA power wire

RELAY DRIVEN GRILLE OR DECK LIGHT FLASHER

AAB03.0124R With high beam override. Use your existing headlights with this flasher. Override allows you to stop high beams flashing by simply using the high/low beam switch. 60 flashes per side per minute.

FLASHER WITH HIGH BEAM OVERRIDE AAB03.0129 Nighttime cutoff deactivates flasher when headlights are turned on. Dual speed option offers 80 flashes per side per minute or 220 flashes per side per minute. You choose when installing Horn feature adds audio as well as visual. 12 volt. Load: 8 amps per side.

Alternating flasher with terminal strip can be wired to grille or deck lights. 60 flashes per side per minute. 12volt. Load: 8 amps per side. Special flash rates available. AAB03.0132R

GRILLE LIGHT/DECK LIGHT FLASHER

HEADLIGHT FLASHER WITH HIGH BEAM OVERRIDE

AAB03.0132 Alternating flasher can be wired to grille or deck lights and a low-amperage switch (not included). 60 single flashes per side per minute. 100% solid state design will give years of dependable service. Reliability of solid state at an affordable price!

AAB03.0126 Turns existing headlights into a powerful alternating warning light. Extra power terminal lets you operate from an existing switch. 60 flashes per side per minute. 12-volt. Load: 8 amps per side. AAB03.W126Complete with 2 feet of 16 GA and 14 GA power wire

AAB03.W132 Complete with 2 feet of 16 GA and 14 GA power wire

RELAY DRIVEN HEADLIGHT FLASHER WITH HIGH BEAM OVERRIDE

AAB03.01230 Double Alternating Simultaneous Flasher Double alternates four times then simultaneous flashes four times and repeats.

60 AMP ALTERNATING FLASHER Ideal for your multi-lighting systems. Our system creates less heat, producing more power and longer life. It will flash 60 times per side per minute. Alternates up to 30 amps per side and operates with almost any standard witch. Smaller size makes it more convenient to install. 12 volt. Load: 30 amps per side. Special flash rates available. AAB03.0200.060

HEADLIGHT AND GRILLE OR DECK LIGHT FLASHER WITH BEAM OVERRIDE

HEADLIGHT / GRILLE OR LIGHT FLASHER WITH HIGH BEAM OVERRIDE

AAB03.W262 Alternating flasher can be wired to headlight and grille or deck lights. Override allows you to stop high beams from flashing while the grille or deck lights continue to flash. 60 flashes per side per minute. 12 volt. Load: 8 amps per side. Special flash rates available.

Alternating flasher can be wired to headlight and grille or deck lights. Override allows you to stop high beams from flashing while the grille or deck lights continue to flash. 60 flashes per side per minute. 12 volt. Load: 8 amps per side. Special flash rates available. AAB03.0262R

AAB03.W262 Complete with 2 feet of 16 GA and 14 GA power wire

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

339

VEHICLE ACCESSORIES

Vehicle Accessories by ABLE 2 PRODUCTS 100% SOLID STATE FLASHERS RANDOM FLASH HEADLIGHT FLASHER FOR POSITIVE GROUND HEADLIGHTS

RANDOM FLASH HEADLIGHT FLASHER WITH HIGH BEAM OVERRIDE

Random Headlight Flasher is designed to work on vehicles with positive ground headlights. Override allows you to stop high beams flashing by simply using the high/low beam switch. Works on vehicles with daytime running lights when headlights are not wired in series. 12 volt. Load: 8 amps per side. Special flash rates available. AAB03.3030

Six different patterns are randomly flashed by this unique headlight flasher. Override allows you to stop high beams flashing by simply using the high/low beam switch. Works with daytime running lights on some vehicles and must be wired to an isolated on/off switch. 12 volt. Load: 8 amps per side. Special flash rates available. AAB03.3124

RANDOM FLASH HEADLIGHT FLASHER WITH HIGH BEAM OVERRIDE

RANDOM FLASH BRAKE LIGHT/BACK-UP LIGHT FLASHER

Six different patterns are randomly flashed by this unique headlight flasher. Override allows you to stop high beams flashing by simply using the high/low beam switch. Extra power terminal lets you operate from an existing switch. 12 volt. Load: 8 amps per side. Special flash rates available. AAB03.3126

Six different patterns are randomly flashed by this unique brake light/backup light flasher. Constantly changing pattern makes motorist aware of your location. 12 volt. Load: 8 amps per side. Special flash rates available. AAB03.3116

MECHANICAL FLASHERS

UNIVERSAL HEADLIGHT ADAPTER Allows any headlight flasher to work with any 12 volt vehicle. Turns on and off with the headlight flasher. Flashing will override any other headlight function including daytime running lights. This module will disable high beam override on headlight flasher. Sold in Pairs AAB03.0500

WIG-WAG HEADLIGHT FLASHER KIT Produces the popular Wig-Wag flash for headlights. Flash rate is 90 flashes per minute. AAB03.0500 Headlight Flasher Kit Complete and fully assembled kit includes double-pole, double throw rocker switch 17.0537 heavy duty flasher, 10 amp bladetype fuse, on indicator light and 12 ft. wire. AAB03.0500 Headlight Flasher Kit Same as 03.0771 but with electromechanical tridon flasher (10.0813)

Head Lights 03.0116 03.011 6R 03.01 24 03.01 24R 03.01 26 03.0129 03.0130 03.01 32 03.0132R 03.0200 03.0262 03.0262R 03.3116 03.3030 03.3124 03.3126 03.0500 03.0771 03.0774

Yes* Yes* Yes* Yes* Yes*

Yes Yes Yes Yes* Yes* Yes Yes Yes

Grille or Deck Lights

Yes* Yes* Yes* Yes* Yes* Yes Yes Yes Yes Yes

REPLACEMENT MECHANICAL FLASHERS AAB10.0813 Electromechanical Flasher Replacement flasher for 03.0774. 90 flashes per minute. AAB17.0537 Thermal Flasher Replacement flasher for 03.0771. 90 flashes per minute

Brake Backup Lights

Flash Pattern

Term Strip

Yes Yes

Alt Alt Alt Alt Alt Alt DbI. AltSimul. Alt Alt Alt Alt Alt Random Random Random Random

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Yes

Yes* Yes*

* Can Flash Headlights OR Grille/Deck Lights but NOT BOTH

340

Alt Alt ** Thermal Driven Flasher

Lead Wire

High Beam Override

100% Solid State Yes

Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes ** ***

Relay Driven

Yes Yes

Yes

Yes ** ***

Dimensions

5 7/16 x 3 3/4 x 1 5 7/16 x 3 3/4 x 1 3 1/4 x 33/4 x 1 31/4 x 33/4 x 1 3 1/4 x 33/4 x 1 3 5/8 x 33/4 x 1 3 ‘/4 x 3 3/4 x 1 3 1/4x 33/4 x 1 3 1/4x3 3/4x1 9 x 33/4 x 1 5 3/8x 33/4 x 1 5 3/8X 33/4 x 1 3 3/4 x 3 3/4 x 1 3 1/4 x 3 3/4 x 1 3 1/4 x 33/4 x 1 3 1/4 x 3 3/4 x 1 3 1/4x 2x 1 2 3/4 x 3 1/2 x 2 2 3/4 x 3 1/2 x 2

1/16 1/4 1/16 1/4 1/16 1/16 1/16 1/16 1/4 1/16 1/18 1/4 1/18 1/16 1/16 ‘/18 1/8 1/2 1/2

*** Electromechanical Flasher

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES Vehicle Accessories by FEDERAL SIGNAL CORP. VEHICLE LIGHTS

VISTA™ HALOGEN LIGHTBAR

VISTA™ STROBE LIGHTBAR

• • • • • •

True 360° unobstructed warning power. More multi-level lighting for maximum visibility and safety. Thousands of possible configurations let you design the lightbar YOU want. Fuel efficient, low profile design for today’s more aerodynamic vehicles. Superior rotator optics produce maximum candela light output. Advanced features: – VistaBeam ™ strobe inter-section clearing light (ICL) – VistaRay ™ halogen inter-section clearing light (ICL)

• • • • •

FIREHAWK™

VIEWPOINT™

• • • • •

• • • •

True 360° primary warning power. More multi-level lighting for maximum visibility and safety. Thousands of possible configurations—design the lightbar YOU want. Low RFI, noise, and amperage draw. Advanced features: – VistaBeam™ intersection clearing strobes (ICL) – VistaRay™ halogen intersection clearing lights (ICL) – “Action Flash” strobe pattern

True 360 degree primary warning. Modular design for easy maintenance and field upgrades. Improved optics – more options available! Various sizes for every application. Custom color lower pods.

Adjustable for any custom cab apparatus. Three or four modular light pods per side. More light to the outside of custom cab roofs than conventional linear lightbars. Simple color customization and dome replacement.

MIRROR LIGHTS

ECONOMASTER DECK LIGHTS

GRILLE LIGHTS

FIREBEAM® / MAGNABEAM®

• • • • • •

•

• • •

•

Low profile. No backflash. Single and dual lamp units. Halogen and strobe. “Air bag wise.” Low current draw.

• • •

Compact, lightweight, low profile design offers flexibility for various applications. EM11H offers 23,000 candelas with 90 flashes per minute. EM610 offers 42,000 candelas with 90 flashes per minute. Economical and efficient.

Strobe or halogen models. Compact housing for a variety of mounting applications. Durable, fully enclosed polycarbonate black matte housing for extended service.

• • • •

JETSONIC®

JETSTROBE™PLUS

• • • •

Modular design for easy maintenance and field upgrades. Multiple options – design your own lightbar. Low profile, aerodynamic design is attractive and fuel efficient. Meets CAC/AAMVA Class A standards with 100 Watt driver.

Head Office: 1-866-652-2877

West: (604) 526-1631

World’s brightest compact warning light68,000 Candlepower reflector provides effective warning. Available in rotating (Firebeam) and oscillating (Magnabeam) models. Dual speed control allows you to choose level of warning urgency. Single and dual speed models available with flash rates of 95 and/or 175 flasher per minute Versatile snap-on domes and color filters allow multiple color combinations. Ultraflash shield multiplies flash sevenfold for increased effectiveness.

Custom designed strobe optics. Most aerodynamic strobe bar available. High intensity multi-flash light output. Advanced features: - No dark time “action flash” - Front light cut-off - Hi-low intensity mode.

Prairies: 1-866-652-2877

East: 1-877-993-9968

341

VEHICLE ACCESSORIES

Vehicle Accessories by FEDERAL SIGNAL CORP. VEHICLE LIGHTS

MINI-JET™ MINI-LIGHTBAR

MINI-JETSTROBE™ MINI-LIGHTBAR

INDEPENDENT AERODYNIC®

• • • •

• 80,000 Candela. • Independent halogen rotators. • Custom design flexibility. • Low amperage draw. • 55 Watt halogen bulbs.

Dome inserts for color customization. Most aerodynamic mini-lightbar available. Durable and dependable. Advanced features: - “Action Flash” eliminates dark time. - front light cut-off. - hi-low intensity mode.

ECONOMASTER™

HIGHLIGHTER™ MINI-LIGHTBAR

221 AERODYNIC® MINI-LIGHTBAR

• • • • •

• • •

Quality warning system in low-cost configurations. Available in 39", 44", 48", and 52" lengths. Various configurations allow for secondary front and rear lighting or diamond mirrors. Customized domes offer multiple color combinations. Low profile mounting kit and quick disconnect cable included.

Compact size, high flash rate. Effective 72,000 candelas (per flash) rotators. Easy color customization.

Same top quality and design of the popular AeroDynic ® lightbar. Independent, motor-driven rotators. Durable, dependable.

PREMIUM VISION®

• • • • • • •

Patented, proven, V-shaped design for maximum light at all angles. Individual light pods permit superior aerodynamic performance and light transmission. Seven brilliant reflectors controlled by long life stepper motors (NO GEARS). Simple color customization and dome replacement. Capable of synchronized or random rotating warning patterns on command. Includes a 100/200-watt siren unit. Available in three sizes – one for every application.

SMART VECTOR® AND VECTOR®

• • • •

Patented V-shaped design for maximum light warning efficiency. Two “smart” pods allow selection of several “on command” primary and secondary light patterns. Individual light pods permit superior aerodynamic performance and light transmission. Simple color customization and dome replacement.

THREE POD VECTOR® MINI-LIGHTBAR

• • • • •

Revolutionary V-shaped construction to maximize light warning efficiency. Three ultra-modular light pods. Custom design flexibility. Simple color customization. 21" mini-system configuration.

JETSTREAM™

• • •

Modular design for easy main-tenance and field upgrades. Multiple options – design your own lightbar! Low profile, aerodynamic design is attractive and fuel efficient.

SIGNALMASTER™ DIRECTIONAL LIGHTS

• • • • 342

Does more than warn - provides direction for added safety. Optically enhanced lenses distribute light better for increased visibility. Low profile design. Mounting available for all applications.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES

Vehicle Accessories by FEDERAL SIGNAL CORP. VEHICLE LIGHTS

STREETHAWK®

• • • • •

ALL-LIGHT STREETHAWK®

The first lightbar with no blind spots and true 360° unobstructed warning power. Unique pod design positions the primary lights above the auxiliary lighting functions. Provides critical warning power through heavy traffic and intersections. Four standard flashing end-lamps (front & rear) sharply define the perimeters of the vehicle, giving the driver an added margin of safety. Three basic sizes: 52", 48", 40".

• • • •

STROBE SYSTEM

True 360° primary warning. Modular design for easy maintenance and field upgrades. Improved optics – 72,000 candela rotators! Three lengths, two base colors to meet every application.

STROBE SYSTEM

• • • • •

Design your own system with modular components. Systems available for every application – a wide assortment of strobe heads and power supplies. “Quad Flash” for increased effectiveness. Easy to hook-up. All components are designed and built for extended service life. Contact us for more information

LIGHT FLASHERS FA3

FA4, FA5, FA6

The model FA3-SB is a compact, economical, electro-mechanical flasher proven in thousands of hours of field use to be a reliable unit for most flasher needs. The FA3 alternately flashes two 10 amp light circuits with a flash rate of 90 flashes per minute. Velcro ® strips are included for ease of mounting. This flasher is offered with a two year warranty – perfect for the user with a high rate of vehicle turnover.

This series of flashers offers versatility in filling your headlight and auxiliary light flashing requirements. Each of these solidstate flashers will operate a two or four headlight system. Designed to provide years of dependable use in long term service vehicles these flashers come with a two-year warranty. Model FA4 is a standard headlight or grille light flasher with a flash rate of 1.9 flashes per second. The FA5 is a high-speed headlight or grille light flasher with a flash rate of 2.6 flashes per second. FA4 and FA5 headlight flashers disengage when highbeams are activated. The FA6 is a standard brake/tail/turn/rear deck light flasher with a flash rate of 2.4 flashes per second.

FHL2*SC The FHL2 is ideal for headlight or grille light flashing needs. This potted, electro-mechanical flasher is compact, heat-resistant, and weatherproof. The FHL2 can flash two 10-amp loads at a flash rate of 90 flashes per minute. The flasher disengages when high-beams are activated.

U131 The U131 flasher offers reliable high-beam wig-wag flash warning. Installation is a snap because the U131 mounts in the engine compartment and easily connects into the existing headlight wires. This flasher produces two 10-amp loads at a rate of 90 flashes per minute. It is also available with a Tridon ® flasher (model U131T). Both the U131 and U131T are daytime running light (DRL) compatible.

SPECIFICATIONS Model FA3 FA4 FA5 FA6 FHL2 U131 U131T

Length inches cm 2.5 6.4 4.0 10.2 4.0 10.2 4.0 10.2 3.0 7.6 3.6 9.1 3.6 9.1

Head Office: 1-866-652-2877

West: (604) 526-1631

Width inches cm 1.4 3.6 2.9 7.4 2.9 7.4 2.9 7.4 2.0 5.1 2.4 6.1 2.4 6.1

Height inches cm 1.8 4.6 1.1 2.8 1.1 2.8 1.1 2.8 1.0 2.5 3.4 8.6 3.4 8.6

Prairies: 1-866-652-2877

East: 1-877-993-9968

Ship Weight lbs kg 1.0 0.5 1.0 0.5 1.0 0.5 1.0 0.5 1.5 0.7 1.5 0.7 1.5 0.7

Maximum Amp Load (2) 10 a (2) 10 a (2) 10 a (2) 10 a (2) 10 a (2) 10 a (2) 10 a

Flashes per Minute 90 114 156 144 90 90 90

343

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS SIRENS

AIRHORN WITH P.A. AND RADIO REBROADCAST

FULL FEATURE SIREN Powers one 100 watt or one 58 watt RMS speaker. The 30.2100 siren contains a rotary switch for mode selection, three push button switches, and an on/off volume switch. This siren produces wail, yelp, phaser and airhorn sounds. The 30.2100 also features an intersection mode. The intersection mode utilizes the yelp, phaser and airhorn sounds in an alternating pattern to create the only intersection mode on the market today. Tap and airhorn features are horn ring adaptable. Complete with microphone, bail mount and all necessary wiring. Speaker sold separately. AAB30.2100

Powers one 100 watt or one 58 watt RMS speaker. Contains a toggle switch for mode selection, one push button switch and an on/ off volume switch. This amplifier produces the airhorn sound. Its primary function is P.A. with radio rebroadcast. Great for volunteer firemen in states which prohibit use of sirens. Also horn ring compatible. Comes complete with microphone, bail mount, and all necessary wiring. Speaker sold separately. AAB30.2108

WAIL, YELP, AND PHASER SIRENS - 3 FUNCTION Save time, space and money with our SHO-ME® siren model #30.2106. Nothing performs like our smaller size, three function undercover siren compete with remote center off switch for wail and yelp plus momentary switch for phaser function. Our advanced model lets them hear you mean business. It is also designed to stay cooler tot the touch during long periods of use. We also offer a wail, yelp and air horn model. AAB30.2106 Three function siren. Wail, Yelp, and Phaser modes only AAB30.2109 Wail/Yelp Siren. With Air Horn

Our SHO-ME® siren model #30.3106 is an enclosed version of the 30.2106 is a must for dash mounting in vehicles with very little room under the dash. This attention getter comes complete with center off switch for wail and yelp plus momentary switch for phaser. This smaller version is also designed to stay cool to the touch. A mounting bracket is included. ABLE 2 also offers this in wail, yelp and air horn. AAB30.3106 Three function siren. Wail, Yelp, and Phaser modes only AAB30.3109 Wail/Yelp Siren. With Air Horn

WAIL, YELP, AND PHASER SIRENS - 4 FUNCTION AAB30.3104 Wail/Yelp Siren With Air Horn Our SHO-ME® siren model #30.3104 is an enclosed version of the 30.2104 is a must for dash mounting in vehicles with very little room under the dash. This attention getter comes complete with center off switch for wail and yelp plus momentary switch for phaser and airhorn. This smaller version is also designed to stay cool to the touch. A mounting bracket is included. ABLE 2 also offers this in wail, yelp and air horn.

AAB30.2104 Four function Siren Wail, Yelp, and Phaser and Airhorn Save time, space and money with our SHO-ME® siren model #30.2104. Nothing performs like our smaller size, four function undercover siren compete with remote center off switch for wail and yelp plus center off momentary switch for phaser and airhorn. Our advanced model lets them hear you mean business. It is also designed to stay cooler tot the touch during long periods of use.

SMARTSIREN®

• • • • • • • •

Light control and electronic siren – COMBINED! System flexibility. Power versatility – 58,100, 200 watts. Optional SignalMaster™ directional light control. “Air Bag Wise” control head. Easy action rubberized key pad. Control buttons back lit with soft red glow. Simple to install.

344

PA500

• • • • •

Precision built, full-featured component electronic sirens Reliable and economical. RFI and EMI immune. Easy to install and fully serviceable. Meet or exceed SAE Recom-mended Environmental Practices for Electronic Equipment J1211.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES

Vehicle Accessories by ABLE 2 PRODUCTS SIRENS PA300

PA400SS INTERCEPTOR® (NOT SHOWN)

• •

• • • • • •

Full-featured PLUS Air Horn sound. Built-in front panel microphone.

• •

Meets Class “A” with only one 100-Watt Speaker. Illuminated non-glare control panel.

Light control and electronic siren combined in one unit. Six auxiliary switches field changeable as push on/push off or momentary. 100, 200 watt power options. Four position slide switch. Horn ring switch gives user choice of horn ring transfer mode. Options include: air horn, car horn, or peak and hold. Park-Siren Deactivator.

PA4000

• • • •

MS3000

• • • •

Small and compact – mounts virtually anywhere. 100 watt capability. Simple to install and operate. Economical.

Noise cancelling microphone. New “Priority” tone. Easy to install and fully serviceable. Backlit instrument panel.

Q2B ELECTRO-MECHANICAL SIREN

183K UNDERCOVER SIREN

• • •

• • • • •

Penetrating, long-distance sound to alert traffic. 123 dB at 10 feet. Sleek chrome plating and high-polish stainless steel.

• • •

Removable control head. Extremely reliable. Diagnostic capability.

Lights and siren control combined. Simplified control for ease of use. Rugged Unitrol switches built to last a minimum of 800,000 cycles. Heavy-duty, polarized connectors ensure quick and easy installation. No battery drain during standby.

Vehicle Accessories by FEDERAL SIGNAL CORP. SIRENS

UNITROL™ OMEGA

UNITROL™ 80K

• • • • •

Siren features eight user-selectable sounds. Compact controller is air bag friendly and allows complete siren, lights, and accessories control. Automatic Component Protection (ACP®) prevents siren damage in the event a speaker short-circuits. Attention-getting Sweep® mode cycles siren through as many as seven sounds. Rugged slide-bar switch provides “eyes free” control of warning light and siren functions.

Wide variety of controllers available to suit every need. Rugged Unitrol switches built to last a minimum of 100,000 cycles. Heavy-duty, polarized connectors ensure quick and easy installation. No battery drain during standby. UM80K amplifier automatically shuts down when a short circuit develops in the speaker or wiring.

UNITROL™ TOUCHMASTER

• • • • • •

Head Office: 1-866-652-2877

West: (604) 526-1631

Simplified switching controls for eyes-free ease of use. Automatic Component Protection (ACP®) prevents damage to the siren in the event a speaker short-circuits. Automatic Power Control keeps options instantly available without drawing power during standby. Tactile sensation when setting switches indicates positive on/off status. Low cost installation. The ultimate in reliability and durability.

Prairies: 1-866-652-2877

East: 1-877-993-9968

345

VEHICLE ACCESSORIES

Vehicle Accessories by FEDERAL SIGNAL CORP. SPEAKERS BP100

• • • •

Bumper mount projects sound to front of vehicle. Compact size allows for convenient installation. Revolutionary sound projection. Class A sound output when matched with a Federal electronic siren amplifier. BP100

BP100F

BP100P

DYNAMAX™

• • • • • •

100-watt power. Meets SAE J1849 and CCR, Title 13, Article 22, Class A. Slim and lightweight. Adaptable. Durable and reliable. Easy to install.

BP350

• • • • • •

Easy to install and fully serviceable. Projects sound to front of vehicle. Custom designed for Econoline 350 truck chassis. Same speaker fits left or right side. Two speakers produce 123 dB at 10 feet. Extremely reliable.

TS100 & MC

• • • •

Powerful. Outstanding performance. Mounting versatility. Meets “Class A” specifications.

TS100

Choose the TS100 for a dependable high-powered 100-watt, economy speaker. The TS100 is designed for mounting behind the grille or in the bumper area of your emergency vehicle. For 200-watt audible warning protection, order model TS200.

For motorcycle applications, Federal Signal offers two 58-watt speakers, model MC in black and model MC-C in polished chrome, and two 100-watt speakers, model MC-5Z, designed for Harley Davidson, and model MC-3Z, designed for Kawasaki.

Vehicle Accessories by ABLE 2 PRODUCTS SPEAKERS AND ACCESSORIES CONCEALED SPEAKERS

100 WATT SPEAKERS

For concealed installation under hood, in front of or behind radiator, near fender-well or behind bumper.

AAB30.0210 Light Bar Speaker Designed to fit most light bars. 100 watt RMS. Black ABS plastic bell. AAB30.0219 ALU 6 inches round aluminum bell 6 inches round Black aluminum bell

30.02110

AAB30.0215P ABS plastic scoop AAB30.0215M Metal scoop

30.0219BLK

30.0219ALU

30.0215P 30.2110

30.7102

30.7220

346

30.0107

SPECIAL MOUNTING BRACKETS

30.7200

30.7033

30.7120

Special behind the grille mounting brackets for behind the grille speakers. AAB30.7102 ‘98 Crown Victoria AAB30.7120 ‘96-98 Taurus AAB30.7102 ‘98 Explorer AAB30.7120 ‘93-96 Caprice AAB30.7102 ‘95-98 Lumina Note: As newer model cars arrive, contact us for updated brackets

Head Office: 1-866-652-2877

30.0218 30.0217M

30.0231 30.0217P

West: (604) 526-1631

90.4460

Prairies: 1-866-652-2877

30.0230

East: 1-877-993-9968

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS SPECIALTY LIGHTS AND ACCESSORIES CO-PILOT MAP LIGHTS Brilliant Halogen lighting with only a 5 watt current draw. Position the goose-necked Co-Pilot any way you want, leaving your hands free for other tasks. Perfect for use in cars, ambulances and fire trucks. Read a map, a chart or book without disturbing the driver. The lamp has an oversized switch on top for easy on, easy off operation. 12-volt.

CO-PILOT MAP LIGHTS AAB16.1350SL Tough weather and corrosion resistant white thermoplastic construction with a 93.H9405 sealed beam halogen bulb. 320째 rotation and 75째 vertical sweep. Molded clutch design allows the light to be operated against limit stops without damage. Easy fit black control comes complete with a fused On/Off switch, and 8 way directional switch for precise beam control and 15 ft. cable. All mounting hardware is stainless steel. 12 volt 50 watt, 3.6 amps.

AAB13.0508 8-1/2" (21.5 cm) permanent mount. AAB13.0509 21-1/2" (54.5 cm) permanent mount AAB13.0510 12-1/2" (31.75 cm) arm lamp with a sturdy springloaded electrical adaptor to plug into your cigarette lighter outlet. AAB13.0530 15" (38 cm) permanent mount.

HI-INTENSITY SPOTLIGHT 6" sealed-beam bulb in a hi-temp ABS plastic housing for dependability. Exclusive tiled-handle grip gives added comfort. Convenient thumb-operated On-Off switch. Complete with a 10-ft. straight power cord with cigarette lighter plug. 12-volt operation standard. Other voltages available. Optional 12-ft. coiled cord and momentary ON switch also available.

AAB06.0075 75,000 CP Spotlight Uses bulb #93.4435. 30 watt, 2.3 amps. AAB06.0160 160,000 CP Halogen Spotlight Uses bulb #93.H7635. 50 watt, 3.9 amps. AAB06.0200 200,000 CP Spotlight Uses bulb #93.4537-2. 100 watt, 7.7 amps. AAB06.0250 200,000 CP Spot or 50,000 CP Flood Uses bulb #93.4007. 100 watt, 7.7 amps. AAB06.0300 300,000 CP Spotlight Uses bulb #93.4049. 150 watt, 11.5 amps.

08.0327

OPTIONS AAB08.0313 AAB05.0505 AAB06.4242 AAB06.4244

12 Ft. Cord Momentary On Switch Mounting Clip Mounting Clip Button

06.0300

08.0329

PORTABLE SPOTLIGHT

06.0300 w/coiled cord

Both Spotlights have a range of up to 1 mile. Slide On/Off switch, sealed-beam bulb, 12ft. cord and rust-resistant, impact-resistant case. 12-volt is standard but other voltages available.

FLASHING SPOTLIGHT AAB08.0327 Flashing Spotlight The Flashing Spotlight is equipped with a Wagner heavyduty flasher (#08.0552) and a long-life GE sealed-beam bulb (#93.4416) for durability, efficiency, economy and dependability. Three position switch, 12-ft. cord and cigarette lighter plug on a 3-inch magnetic base. 12-volt is standard but other voltages are also available. Choice of snap-on lens colour: Amber, Blue, Green or Red. AAB08.0329 Flashing Spotlight With universal swivel on a 3-inch magnetic base. AAB08.0313 Coiled Power Cord Optional on all lights. Cord is 3-ft. long, extends to 12-ft.

AAB08.0335 35,000 CP Spotlight Uses bulb #93.4416. 30 watt 2.3 amps AAB08.0355 50,000 CP Spotlight Uses bulb #93.4405. 30 watt 2.3 amps AAB08.0375 100,000 CP Spotlight Uses bulb #93.H7604. 50 watt 3.9 amps AAB08.0313 Optional 12 ft. Coiled Cord 08.0335

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

347

VEHICLE ACCESSORIES

Vehicle Accessories by ABLE 2 PRODUCTS SPECIALTY LIGHTS AND ACCESSORIES

SOLID STATE ELECTRONIC BACK-UP ALARMS AAB13.0035 Medium Duty Alarm 107 decibel single sound level. 3" high, 4-1/8" wide. AAB13.0040 Economy Alarm Suitable for most light duty vehicles. 97 decibel single sound level. 0.2 amps, 12-volt, 2-5/8" high, 4" wide. AAB13.0134 Back-up Switch For use with #13.0030, #13.0035 and #13.0040 if vehicles are not equipped with back-up lights.

SHO-ME® back-up alarms, assuring dependable high performance at economical cost. All feature: solid state electronics, sealed in epoxy resin, steam-cleanable, spike and polarityprotected, high-impact, non-metallic, corrosion-proof housings. Meets OSHA, Bureau of Mines, and State regulations. Complete with universal mounting bracket. AAB13.0030

AAB13.0030 Multi-Purpose Alarm Suitable for all heavy equipment or any vehicles operating in high noise areas. Conforms to SAE J 994 b criteria. 112 and 107 decibel adjustable sound. Draws less than one amp. 6-36 volts, 3" high, 4-1/8" wide.

AAB13.0135

AAB13.0040

VELCRO® BRAND TAPE Made of tough nylon for long life. One side of loops and the other of hooks - just touch together to close and peel to open. AAB15.0404 1" x 2" Pieces Six (6) pieces, 1" x 2" (3 hook and 3 loop) carded. 12 packages per card. AAB15.0402 2" x 3" Pieces Four (4) pieces, 2" x 3" (2 hook and 2 loop) carded. 8 packages per card.

AAB15.0403 1" hook by the yard. AAB15.0404 1" loop by the yard. AAB15.0405 2" hook by the yard. AAB15.0406 2" loop by the yard. AAB15.0411 1" Lock Fast Tape Extra tough nylon tape for more permanent mounting needs. Will tolerate a limited number of repositionings, but will hold fast under the worst conditions.

14.0557

14.0570

14.0571

14.0373

348

14.0553

14.0570

LOCKFAST TAPE Extra tough nylon tape for more permanent mounting needs. Will tolerate a limited number of repositioning but will hold fast under the worst conditions. AAB15.0411 1 inch Lockfast Tape by the yard.

12-VOLT ACCESSORY OUTLET

8 SECOND ACCESSORY TIMER

AAB14.0553 3 Accessory outlet box. Sturdy ABS plastic box with chrome accents. Complete with 15 amp automatic reset circuit breaker and 3 ft. wire for easy installation. Attached plugs keep receptacles clear and fee of dirt and moisture. Great for spot lights, cell phones, radar guns, CB’s radios etc. A nice addition for your boat or RV. AAB14.0370 Switch/Outlet Combo Keep those most-used items plugged in and ready to go with this switch-outlet combination. Lighted rocker switch (#05.0501) lets you know at a glance when cigarette lighter type outlet is on. Blade-type fuse for added safety. Attractive vinyl-covered bracket attaches easily under dash. AAB14.0570 Chrome Single Accessory Outlet Ready to install in auto, boat, camper or motorcycle. AAB14.0571 Chrome Mounting Bracket For use with single accessory outlet or cigarette lighter.

AAB25-3800 Designed to turn on accessories 8 seconds after vehicle has been started. Accessories will remain on until ignition has been turned off. DELAY ACCESSORY TIMER AAB25.3500 Delay timer is designed to turn on accessories 4 seconds after vehicle has been started. It will keep accessories on for a predetermined (adjustable) amount of time after ignition has been turned off. Adjustable from 2 minutes to 33 hours. 12 volt.

14.0370

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES

Vehicle Accessories by FEDERAL SIGNAL CORP. SPECIALTY LIGHTS AND ACCESSORIES VISIBEAM II

NIGHTFIGHTER WORKLIGHT

• • • •

• • • • •

Effective work area illumination at your fingertips. Easy to operate, compact control fits in the palm of your hand. Exposed materials are non-corrosive for extended life. Easy to install and service. Federal Signal introduces the VisiBeam® II Remote Controlled Spotlight - the spotlight that provides effective work area illumination at your fingertips. Like our original VisiBeam, the VisiBeam II spotlight is reliable and easy to use. New technology makes it even more effective and economical.

Powerful, effective 3-lamp unit. Flood and spot capability. Stainless steel light housing assembly. Telescopic mount. Easy to maneuver. The Night-Fighter ® Work Light (Model FL3SF-012SB) is a unique, integrated three-lamp emergency work light with spot/flood capability at the flick of a switch. Specially designed for emergency vehicular use with a four foot telescoping mount.

LITTLITE® GOOSENECK LAMPS

• • • • • •

3M OPTICOM EMITTER

• • • •

Flexible, durable gooseneck. High quality construction. Sharp, bright white light. Low profile/sleek design. Available in 6", 12", and 18" lengths. Rheostat or On/Off switch.

Emitters available in chrome and black finishes. Available as a pre installed (onAeroDynic ® , StreetHawk ® , and Vector ® lightbars) or as a standalone option. System includes: emitter, power supply, and power cable. High and Low Priority configurations. The Opticom™ Priority Control System from 3M is designed to increase safe passage of emergency vehicles and motorists by controlling traffic flow on the way to a scene. With a model 3M592 signal emitter installed on an emergency vehicle and a receiver connected to a traffic light, the vehicle’s driver can momentarily alter the light’s phase to stop cross traffic with a red light.

SWITCH BOXES AND ACCESSORIES SW400SS

SW400SSJ

• • • • • •

Mounts flush to PA300 Siren. Provides complete control of up to seven functions. Police and Fire/Ambulance legends included. Backlighting gives easy nighttime visibility. All circuitry is fused. Completely assembled. The Federal Signal model SW400SSJ switch control provides switching for seven separate lighting or auxiliary functions, and is specially designed to allow operation with the Smart Vector ® family lighting system. The unit has a 3-position slide switch, three lighted single-pole, single-throw (SPST) rocker switches, and one momentary center off rocker switch. This momentary switch is especially effective when jogging the Smart Vector “smart” pods in the alley, takedown or searchlight modes.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

• • • • • •

Mounts flush to PA300 Siren. Provides complete control of up to seven functions. Police and Fire/Ambulance legends included. Backlighting gives easy night time visibility. All circuitry is fused. Completely assembled. The Federal Signal model SW400SS switch control provides switching for seven separate lighting or auxiliary functions and is specially designed to allow operation with the Vector ® family lighting system. The control unit has a 3-position slide switch and four lighted single-pole, single-throw (SPST) rocker switches.

SW200 & SW300

• • • • •

Complete control of up to six lighting functions (SW300). Mounts flush to PA300 Siren. Backlighting gives easy night time visibility. Police and fire legends included. Fused circuitry.

East: 1-877-993-9968

SW300

349

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS VEHICLE ACCESSORIES BLACK ACCESSORY RACK Two, three and four position black racks fit in both bucket and bench style police vehicles. Houses your radio, siren and switching systems without interference to the driver or air bag deployment. AAB07.0200 Two Positions AAB07.0300 Three Positions AAB07.0400 Four Positions AAB07.0200 Two Positions Optional mounting racks available AAB07.3000 Crown Vic Bucket Seat Adapter AAB07.3001 Crown Vic Bench Seat Adapter AAB07.3002 Flat Surface Mounting Bracket AAB07.3003 Lumina Mounting Bracket

AAB07.1001 Four position rack comes complete with padded armrest. Holds up to four items such as radio, siren, switching systems etc. Mounting arms allow almost any style of equipment to fit rack. AAB07.1002 Same as 07.1001 except padded arm rest is enclosed. Great for storing those extra items. Both available with optional mounting brackets listed above.

SWITCH BOXES AND ACCESSORIES IGNITION OVERRIDE AAB05.0915 With just a push of the button, the ignition override allows you to run off the ignition switch, remove our keys and lock the door, while vehicle and accessories continue to run. Once the key is removed, the steering wheel and gearshift are locked. Perfect when you must be away from your vehicle at an accident or crime scene but need to keep your emergency lights and radio on. Also helpful in inclement weather when your heater or air conditioner is on. Great for your canine friends. 12 Volt. AAB05.0917 Wiring kit for Ignition Override

6 POSITION SWITCH BOX AAB05.6000 Control Box Comes complete with six, 05.0501 lighted, single-pole, single -throw, individually fused rocker switches for fingertip control of all your lighting functions. Above each switch is a legend. An LED display provides a soft, non-glare background to offset the black type of the legend. Black powder coated steel case. Includes bail mount. AAB05.6040 Control Box Same as 05.6000 only the first switch is wired to a 40 amp relay and 40 amp circuit breaker for high amperage applications. Includes bail mount. 12 volts.

BRAKE LIGHT CUT-OFF SWITCH AAB05.1000 This device is a must for undercover and surveillance vehicles. At the flip of a switch you can deactivate your brake lights to move in close. Flip on to return to fully operational for normal driving or pursuit. Will not affect ABS system. 12 volt.

4 POSITION SWITCH

5 POSITION HEAVY DUTY SWITCH PANEL

8 POSITION SWITCH BOX

AAB05.4000 Control Box Features a totally enclosed switch box utilizing 4 each 05.0501 lighted, single pole, single throw, rocker switches. Each switch is individually fused at 20 amps. Attractive black powder-coated steel case for durability. This box comes complete with adhesive labels for identification and bale mounting bracket. All switches are pre-wired for end user convenience. AAB05.4040 Control Box Same as 05.4000 only the first switch is wired to a 40 amp relay and 40 amp circuit breaker for high amperage applications. 12 volts.

AAB05.5300 Customized Switch Panel 5 heavy-duty 30 amp fully lighted rocker switches. Each switch input fused as 25 amps. Changeable legends with LED Backlight for long life. “L” brackets for mounting. 5 sided “Open Back” box has a durable black powder coat finish. Available with legends as shown or order custom legends. 12 volt.

AAB05.8000 Control Box Comes complete with eight, 05.0501 lighted, singlepole, single -throw, individually fused rocker switches for fingertip control of all your lighting functions. Above each switch is a legend. An LED display provides a soft, non-glare background to offset the black type of the legend. Black powder coated steel case. Includes bail mount. AAB05.8040 Control Box Same as 05.8000 only the first switch is wired to a 40 amp relay and 40 amp circuit breaker for high amperage draw applications. AAB05.8040 Control Box Same as 05.8000 only the first two switches are wired to a 40 amp relay and 40 amp circuit breaker for high amperage draw applications.

350

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

VEHICLE ACCESSORIES Vehicle Accessories by ABLE 2 PRODUCTS SWITCH BOXES AND ACCESSORIES

11 1

12/13

23 24

Product No

Amp Rating

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

05.0501 05.0502 05.0503 05.0504 05.0505 05.0506 05.0507 05.0508 05.0509 05.0510 05.0511 05.0512 05.0513 05.0616 05.0700.030 05.0700.040 05.0700.075 05.0701.20/30 05.0750.010 05.0750.020 05.0750.030 05.0750.040 05.0750.050 05.0800 05.0610 05.0610HD 05.0614 05.0614HD

20 15 30 20/20 15 15 15 15 15 15 8 -70 30 40 75 20/30 10 20 30 40 50 Choice** Choice*** 20 or 25 Choice*** 20 or 25

Circuit

Rocker

Bezel

SPST RED BLACK SPOT Center Off RED BLACK SPST RED BLACK SPST RED BLACK SPST Momentary RED BLACK DPDT Center Off BLACK BLACK SPST CHOICE* BLACK DPDT No Center Off RED BLACK SPDT Center Off CHOICE* BLACK Colored lens only of 115.0507and 05.0609. Choice* of color from list below. SPST RED/BLACK BLACK Mercury BLACK BLACK ------SPST --SPST --SPST --SPST --Auto Reset --Auto Reset --Auto Reset --Auto Reset --Auto Reset ------------------

* Amber, Black, Blue, Clear, Green, Red or White

Head Office: 1-866-652-2877

West: (604) 526-1631

** 3, 5, 7.5, 10, 15, 20 or 25

Prairies: 1-866-652-2877

Dimensions

Lighted

Description

9/16 x 1 1/8 9/16 x 1 1/8 13/16 x 1 7/16 1 1/16 x 1 1/8 9/16 x 1 1/8 13/16 x 1 7/16 13/16 x 1 7/16 7/8 x 1 1/8 13/16 x 1 7/16

YES NO YES YES NO NO YES NO YES

SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH

9/16 x 1 1/8 1 3/8 x 1/2 --1x1x1 1x1x1 1 3/4 x 1 1/4 x 2 1x1x1 2 x 1 5/16 x 1 1/4 1 15/16 x 1 3/8 x 1 1/4 1 15/16 x 1 3/8 x 1 1/4 1 15/16 x 1 3/8 x 1 1/4 1 15/16 x 1 3/8 x 1 1/4 -1 5/8 x 7/8 x 1/2 2 1/8 x 3 9/16 x 15/16 1 5/8 x 7/8 x 1/2 2 1/8 x 3 9/16 x 15/16

NO NO -----------------

SWITCH SWITCH BRACKET POWER DIST. LOCK RELAY RELAY RELAY RELAY BREAKER BREAKER BREAKER BREAKER BREAKER BLAOE FUSE SINGLE FUSE BLOCK SINGLE FUSE BLOCK NO QUAD FUSE BLOCK QUAD FUSE BLO KOD

*** 3, 4, 7.5, 10 or 15

East: 1-877-993-9968

351

VEHICLE ACCESSORIES

Vehicle Accessories by INTEGRIAN MOBILE DIGITAL VIDEO

DP-2

THE NEXT GENERATION IN MOBILE VIDEO TECHNOLOGY From routine car stops to event management and response, there’s no substitute for ruggedized, digital video optimized for tough mobile environments. DigitalPatroller’s heritage is exclusively in the mobile digital arena. Our mobile video products have been designed from the ground up to be the best in the world today, earning DigitalPatroller a solid reputation as the toughest, most dependable digital video system on the market.

CAMERAS Integrian cameras are built to capture accurate, high resolution images. Patent-pending technology zeros in then digitally expands pixel resolution to produce razor sharp images, so no detail is lost. Just as importantly, these cameras are built to perform flawlessly even amid the constant temperature and voltage fluctuations and extreme vibrations inside a police cruiser. Main • LED for “on” verification from outside the car • 22x optical zoom • 470,000 pixels • 480 TV lines resolution • Built-in heater / operating temp -20c to 50c • Mirror image capability Back-seat • Built-in IR array with 6 LEDs for capturing video in total darkness • 12 ft. range • 420 TV lines resolution

KEY FEATURES • Four-camera simultaneous recording, for maximum coverage • Four audio inputs for simultaneous recording • MPEG 4 ASP for more video storage • Live remote viewing capability over wired and wireless networks • “ Active” wireless transmission for full remote functionality • Optional redundant fixed drives for maximum data protection • Data transfer via GB Ethernet wired, wireless transmission or removable HDD • Small footprint for flexible installation • Configurable resolution from 320 x 240 up to 720 x 480 • Remote triggering digital RF microphone • Records GPS location, date/time, unit ID, radar information and more • Easy installation: Storage blade can be removed and installed without re-cabling

DISPLAY UNIT Ruggedized display units allow the option of using DigitalPatroller without an in-car laptop. The LCD monitor can be mounted overhead, on the center console, or in any other convenient location. • Ruggedized 4.3” display • Single-touch license plate ID function • Easy to use; direct • Audio command confirmation

DATA STORAGE AND RETRIEVAL This is where analog and digital systems part company. Digital systems give you near-instant access to whatever type of information you need to retrieve, in a format that is durable, secure and tamperresistant. Video data can be viewed, searched for and retrieved using a number of user-defined criteria, such as GPS location, radar speed, officer ID, incident ID, stop type and more. DigitalPatroller’s data management system performs a number of functions, and configurable settings give you total control of your database. • Easy to use • Powerful feature set • Accurate audit trail • Reports & advanced queries • One-click video playback WIRELESS MICROPHONE The last thing an officer wants to think about during an incident may be the first thing the D.A. asks for. Audio evidence is every bit as crucial as visual evidence. The wireless microphone is built to synchronize perfectly with the DigitalPatroller MDVR, and is fully automated for maximum performance with minimal officer interaction. • Compact size • Rugged & lightweight • Built-in microphone - no wires • Any transmitter syncs with any receiver • Automatically triggers DigitalPatroller DVR into “record” mode • Auto-talk feature with long range transmit • Fast battery recharge

352

FILE MANAGEMENT Superior file management means no more lost or damaged recordings. Easily access video data for court proceedings, investigations, training or routine management. VIDEO PLAYER Play back audio and video in conjunction with the complete range of supplementary data and vehicle system status indicators. All recorded data is logically displayed on one screen for quick access to critical event information. VIDEO TRANSFER Quickly output DigitalPatroller files to television, videotape, CD or DVD for external use. Display any combination of on-screen overlays featuring supplementary and system status data.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East: 1-877-993-9968

BIKE PANT/SHORT

T-SHIRT

Front

Rear

MDC TACTICAL FORCE CLOTHING INC. is a wholly owned subsidiary of the M.D. CHARLTON COMPANY, one of the largest law enforcement equipment distributors in Canada.

SEVEN POCKET TROUSER

The newly acquired clothing division, MDC TAC brings to the MD Charlton group years of experience in supplying high quality custom law enforcement clothing and workwear with a reputation for excellent service and attention to detail. The Mississauga based facility is able to provide coast to coast service in Canada with experience at supplying to major U.S. organizations, including the Chicago Police Department.

BIKE JERSEY

MDC TAC stands for Quality, Durability and Service at a fair price and is backed by the MD Charlton national sales team with over 28 years of experience. We believe in listening closely to our customer and innovating. We were recently able to design and create a more effective bike patrol uniform for the Victoria B.C. police force, incorporating highly valued customer feedback to create a more applicable uniform for what has become a new way of providing security in urban settings. We are always willing to push design and new clothing technologies that help law enforcement agencies Serve and Protect. In this catalog you will see many more standard lines that have come to be relied upon by many law enforcement organizations, as well as new products. Do not hesitate to contact the MD Charlton sales team to discuss the needs of your organization for law enforcement and security clothing.

2 POCKET SHIRT WITH EPAULET

3061 SHORT SWEATER

TEN POCKET TROUSER

速

Head Office: Victoria Phone: (250) 652-5266 Fax: (250) 652-4700 Toll-Free: 1-866-652-2877 6825 Veyaness Road, Victoria, BC V8M 2A7 E-mail: sales@mdcharlton.ca

Western Canada: BC Mainland, Yukon, NW Territories Phone: (604) 526-6382 Fax: (604) 526-3217 349 Columbia Street, New Westminster, BC V3L 5T6 E-mail: grant@mdcharlton.ca

Prairies: Alberta, Saskatchewan, Manitoba Phone: (306) 549-4602 Fax: (306) 549-4663 Toll-Free: 1-866-652-2877 E-mail: ron@mdcharlton.ca

Law Enforcement Equipment & Sporting Goods Distributors

Ontario & Eastern Canada Phone: (905) 625-9846 Fax: (905) 625-3538 Toll-Free: 1-877-993-9968 Unit 3, 4580 Eastgate Parkway, Mississauga, ON L4W 4K4 E-mail: joe@mdcharlton.ca

Ottawa Government & Military Sales Scott Mcleod Phone: 613-841-7855 Fax: 613-841-9482 E-mail: scott@mdcharlton.ca

Visit us online www.mdcharlton.ca