ComecoGTS control devices by Naeem Aziz

process indicators Low-cost Programmable Display TI08 ♦ ♦ ♦ ♦ ♦ ♦

Lowest cost 5 DIN cases - up to 1/32 DIN 4-digit bright LED indication Universal linear input Up to 2 alarm relays available with pulsed output Fully programmable parameters

TI08 is a cheap programmable process indicator available in 5 DIN cases and designed for wide range of display applications with/without relay alarm. Equipped with a bright 4-digit LED display, this model is especially suitable for measuring and controlling various technological values from -1999 to 9999 with resolution of up to 6000 points. The device may be equipped with up to 2 programmable relays providing ON/OFF control/alarm with or without pulse mode. TI08 accepts various linear input voltage or current signals. The display limits, decimal point position, measurement offset value as well as many other parameters are fully programmable. Thanks to its excellent price-to-performance ratio, TI08 is an exceptionally widely applicable device.

Technical specifications Input Linear voltage 0...10 V Linear voltage 0...5 V (1) Linear current 0(4)...20 mA Custom linear (option) Two-wire external transmitter Decimal point selection

(programmable) -1999...9999, programmable -1999...9999, programmable -1999...9999, programmable -1999...9999, programmable 4...20 mA (2) programmable (up to 2 relay outputs (3))

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Alarms

5A/250V w/ NO/NC (4) contact 1A/250VAC (5) 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF, pulse mode programmable

Accuracy 0.3% from span 0.02% from span for 1 °C

Measurement error Temperature drift

Operating conditions -10...65 °C 0...85 %RH

Operating temperature Operating humidity

Power supply Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage External mains transformer (6) Consumption

230 VAC (1) or 115 VAC (1) 90…250 VAC/DC (1) 12…24 VAC/DC or 24 VAC (1) 12…24 VAC/DC 9(12) VAC max. 1.5 VA

Indication and controls Digital display LEDs Keyboard

Design and materials Front dimensions [mm] Mounting Panel cutout [mm] Mounting depth [mm] Display digit height [mm] Maximum weight [g] Protection, front/terminals Increased front IP (option) Case material Wiring (terminals)

4 LED indicators 2 LEDs for output state 2 membrane keys, lockable 'B' 'H' 'S' 'L' 'M' 96x96 96x48 48x48 72x36 48x24 panel panel panel panel panel 90x90 90x42 45x45 71x29 46x22 98 56 98 100 42 14 14 20 10 9 250 150 350 200 30 IP54/20 IP54/20 IP54/20 IP54/20 IP54/20 IP65 IP65 IP65 (7) plastic plastic plastic plastic plastic plug-in plug-in screw screw screw

(1)

Not available for case 'M' Provides loop supply voltage - 24 VDC (only w/ isolated power supply) Only one for case 'M' (4) For case 'S' 2nd relay is NO; for case 'L' both relays are NO; for case 'M' relay is 3A/250VAC with NO contact (5) 0.2A/250VAC for cases 'L' and 'M' (6) Ordered separately (see 'Accessories') (7) Ask for availability! (2)

(3)

TI08 - G0.G1.G5G5 - #1.#2

Code Feature or option

(8)

Code values

Case (front size)

B - 96x96 mm, H - 96x48 mm, S - 48x48 mm, L - 72x36 mm, M - 48x24 mm

Power supply

A - 230 VAC (1), B - 115 VAC (1), C - 90…250 V (1), E - 9(12) VAC w/ external transformer (6), P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC (1)

Relay output (3)

X - none, C - relay NO/NC (4), D - SSR, J - for external SSR, M - isolated MOS gate

Increased front protection

X - none, P - IP65 front protection (1,8)

Customer specified input signal

X - none, Z - custom linear signal (specify!)

Not available for case 'S'

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

Ordering code

process indicators Programmable Trip-alarm Unit TI08-R ♦ ♦ ♦ ♦ ♦ ♦ ♦

Low cost 11-pin box for DIN-rail mounting 3-digit bright LED indication Universal linear input Up to 2 alarm relays available with pulsed output Auxiliary output for powering external transmitters Fully programmable parameters

TI08-R is a cheap programmable process indicator for DIN-rail mounting designed for trip-alarm applications. Equipped with a bright 3-digit LED display, this model is especially suitable for measuring and controlling various technological values from -199 to 999 with resolution of up to 1000 points. The device can have up to 2 programmable relays providing on/off control/alarm with or without pulse mode. TI08-R accepts various linear input voltage or current signals from 2- and 3-wire transmitters that can be powered internally via the auxiliary power supply output. The display-to-input correspondence, decimal point position, measurement offset value as well as many other parameters are fully programmable. Thanks to its excellent price-to-performance ratio, TI08-R is an exceptionally widely applicable device.

Technical specifications Input Linear voltage 0...10 V Linear voltage 0...5 V Linear current 0(4)...20 mA Two-wire external transmitter Decimal point selection

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Alarms

(programmable) -199...999, programmable -199...999, programmable -199...999, programmable 4...20 mA (1) programmable (up to 2 relay outputs) 5A/250V w/ NO/NC (2) contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF, pulse mode programmable

Accuracy 0.3% from span 0.02% from span for 1 °C

Measurement error Temperature drift

Operating conditions -10...65 °C 0...85 %RH

Operating temperature Operating humidity (1) (2) (3)

Power supply Mains supply voltage Isolated low voltage Non-isolated low voltage External mains transformer (3) Consumption

230 VAC or 115 VAC 12…24 VAC/DC or 24 VAC 12…24 VAC/DC 9(12) VAC max. 1.5 VA

Indication and controls Digital display LEDs Keyboard

3 LED indicators, 10 mm 2 LEDs for output state 3 membrane keys, lockable

Design and materials Case material Mounting Wiring Dimensions Weight Protection, front/terminals

plastic in socket or on 35 mm DIN rail socket UNDECAL (3) 35x78x91 mm 180 g IP44 / IP20

Provides loop supply voltage - 24 VDC (only w/ isolated power supply) NO for the 2nd relay Ordered separately (see 'Accessories')

Ordering code

TI08 - R.G1.G5G5

Code Feature or option

Code values

Power supply

Relay output

X - none, C - relay NO/NC (2), D - SSR, J - for external SSR, M - isolated MOS gate

COMECO reserves the right of changing specifications without prior notice!

A - 230 VAC, B - 115 VAC, E - 9(12) VAC w/ external transformer (3), P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

process indicators Programmable Process Indicator TC660 ♦ ♦ ♦ ♦ ♦ ♦ ♦

20 mm or 32 mm digit height Universal programmable input 2 programmable alarm outputs Programmable digital filter Calibration and self-calibration Isolated current output RS485 serial interface available

TC660 is a multifunctional programmable process indicator with a 4-digit, 20 mm or 32 mm programmable display that provides excellent visibility in many applications. The device has a universal input for the most common thermoresistances, thermocouples, and linear signals. The input has a built-in automatic software compensation of line resistance and cold junction temperature as well as automatic software compensation of temperature drift, and can be calibrated manually. A programmable input filter and various options for access restriction are available. TC660 can also have up to 2 programmable alarm outputs (2 relays or 1 relay and 1 analog output) and can be equipped with an isolated RS485 serial interface. Input Technical

specifications

Pt100 (w=1.385, 1.391); 3-wire Cu100 (w=1.426, 1.428); 3-wire Thermocouple "J" Thermocouple "K" Thermocouple "S" Thermocouple "R" Thermocouple "B" Thermocouple "C" Thermocouple "L - GOST" Linear voltage 0...50 mV (1) Linear current 0...20 mA Linear current 4...20 mA Input type selection Decimal point selection Digital filter Input calibration

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Operation modes Control algorithms Auto-tuning Alarms Other control features Analog output (3) Serial interface

(programmable) -100...600 °C -50...200 °C 0...1000 °C 0...1300 °C 0...1700 °C 0...1700 °C 100...1800 °C 0...2300 °C 0...600 °C -1999...9999, programmable -1999...9999, programmable -1999...9999, programmable (2) programmable programmable programmable programmable (up to 2 outputs) 5A/250V w/ NO/NC contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA manual and automatic ON/OFF, PID-pulse, and PID for motor valves, programmable programmable programmable BUMPLESS and ANTI-WINDUP 4(0)...20 mA or 0...10 V, isolated RS485, isolated

Accuracy 0.3% (4) from span 0.01% from span for 1 °C automatic software automatic software automatic software

Measurement error Temperature drift Self-calibration Cold junction compensation RTD line compensation

Power supply Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage Consumption

230 VAC or 115 VAC 90…250 VAC/DC 12…24 VAC/DC or 24 VAC 12…24 VAC/DC max. 5 VA

Indication and controls 4 LED indicators 2 LEDs for output state 3 membrane keys

Digital display LEDs Keyboard

Operating conditions Operating temperature Operating humidity

'H' 96x48 panel 90x42 98 20 400 IP54 / IP20 IP65 plastic plug-in terminals

-10...55 °C 0...85 %RH 'D' (5) 144x72 panel 136x66 92 32 600 IP54 / IP20 plastic plug-in terminals

(1)

Other voltage ranges can be obtained by the means of 2 external resistors. Provides loop supply voltage - 24 VDC (only w/ isolated power supply) Instead of 1st relay! If mounted, it can be programmed as control or retransmission! (4) 0.5% for T/Cs "S", "R", "B", and "C" (5) Ask for availability! (3)

Ordering code

TC660 - G0.G1.G5G5.G9'9".G11 - #1

Code Feature or option

(6)

Code values

Case (front size)

H - 96x48 mm, D - 144x72 mm (5)

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Relay output

X - none, C - relay NO/NC, D - SSR, J - for external SSR, M - isolated MOS gate

G9'

Serial interface

X - none, B - RS485

G9"

Protocol

A - ASCII, C - ASCII for "PolyMonitor"

G11

Analog output (3)

X - none, E - 0…20 mA, F - 4…20 mA, K - 0…10 V

Increased front protection

X - none, P - IP65 front protection (6)

Available ONLY for case 'H'

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

(2)

process indicators Programmable Process Indicator TC67U ♦ ♦ ♦ ♦ ♦ ♦ ♦

Low cost Large LED display up to 45 mm high Universal input for 4 RTDs, 6 T/Cs, and 3 linear types 2 alarm relay outputs Software input line and 'cold junction' correction Self-testing and self-calibration RS485 serial interface available

TC67U is designed for wide range of control applications. It is equipped with a large LED display and 2 programmable relay alarm outputs. TC67U has a universal input accepting signals from Pt100, Pt1000, PTC, 6 thermocouple types as well as linear current and voltage signals from external transmitters. This device also has a built-in circuit for self-testing and self-calibration, manual measurement offset setting, and automatic software compensation of line resistance and cold junction temperature. The display-to-input correspondence (in case of linear input), decimal point position, temperature measurement unit, and offset value are also programmable through the convenient keyboard. Thanks to its large display, universal input, serial interface, and excellent price-to-performance ratio, TC67U is exceptionally widely applicable device.

Technical specifications (programmable)

Pt100 (w=1.385); 3-wire Pt1000 (w=1.385); 3-wire PTC (1k at 25 °C); 3-wire PTC (2k at 25 °C); 3-wire Thermocouple "T" Thermocouple "J" Thermocouple "K" Thermocouple "S" Thermocouple "R" Thermocouple "B" Linear voltage 0...10 V Linear current 0(4)...20 mA Custom linear (option) (3) Two-wire external transmitter Manual input offset Input type selection Decimal point selection Temperature measurement unit

Outputs

-100...850 °C -100...600 °C -50...150 °C -50...150 °C -40...400 °C -20...1000 °C -20...1300 °C (1) 0...1700 °C (1) 0...1700 °C (1) 100...1800 °C (1) -1999...9999 (2), programmable -1999...9999 (2), programmable -1999...9999 (2), programmable 4...20 mA (4) programmable programmable programmable °C or °F, programmable (up to 2 relay outputs)

Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Set point Alarms Serial interface

5A/250V w/ NO/NC contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF within input range limits programmable RS485, isolated

Accuracy Measurement error Temperature drift Cold junction compensation RTD line compensation

Power supply Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage Consumption

3 or 4 LED indicators 2 LEDs for output state 3 membrane keys

Digital display LEDs Keyboard

Operating conditions Operating temperature Operating humidity

Design and materials Front dimensions [mm] Mounting Panel cutout [mm] Mounting depth [mm] Display digits Display digit height [mm] Maximum weight [g] Protection, front/terminals Increased front IP (option) Case material Wiring (terminals) (4)

(2)

(5)

Ordering code

230 VAC or 115 VAC 90…250 VAC/DC 12…24 VAC/DC or 24 VAC 12…24 VAC/DC max. 2 VA

Indication and controls

(1)

Up to 1000 °C for case 'D3' -199...999 for case 'D3' (3) Instead of linear current

0.3% from span 0.02% from span for 1 °C automatic, -10...80 °C automatic, up to 2 х 25 Ω

(6)

'H' 96x48 panel 90x42 98 4 20 400 IP54/20 IP65 (5) plastic plug-in

'D3' 144x72 panel 136x66 92 3 45 600 IP54/20 plastic plug-in

Provides loop supply voltage - 24 VDC (only w/ isolated power supply) Double front panel sealing! Available ONLY for case 'H'

TC67U - G0.G1.G5G5.G9'9" - #1.#2

Code Feature or option

Code values

Case (front size)

H - 96x48 mm, D3 - 144x72 mm w/ 3-digit display, D4 - 144x72 mm w/ 4-digit display

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Relay output

X - none, C - relay NO/NC, D - SSR, J - for external SSR, M - isolated MOS gate

G9'

Serial interface

X - none, B - RS485

G9"

Protocol

A - ASCII, C - ASCII for "PolyMonitor"

Increased front protection

X - none, P - IP65 front protection (6)

Customer specified input signal

X - none, Z - custom linear signal (specify!) (3)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

-10...65 °C 0...85 %RH 'D4' 144x72 panel 136x66 92 4 32 600 IP54/20 plastic plug-in

COMECO reserves the right of changing specifications without prior notice!

Input

process indicators Programmable Process Indicator TC67U ♦ ♦ ♦ ♦ ♦ ♦ ♦

Technical specifications (programmable)

Outputs

Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Set point Alarms Serial interface

5A/250V w/ NO/NC contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF within input range limits programmable RS485, isolated

Accuracy Measurement error Temperature drift Cold junction compensation RTD line compensation

Power supply Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage Consumption

3 or 4 LED indicators 2 LEDs for output state 3 membrane keys

Digital display LEDs Keyboard

Operating conditions Operating temperature Operating humidity

(2)

(5)

Ordering code

230 VAC or 115 VAC 90…250 VAC/DC 12…24 VAC/DC or 24 VAC 12…24 VAC/DC max. 2 VA

Indication and controls

(1)

Up to 1000 °C for case 'D3' -199...999 for case 'D3' (3) Instead of linear current

0.3% from span 0.02% from span for 1 °C automatic, -10...80 °C automatic, up to 2 х 25 Ω

(6)

'H' 96x48 panel 90x42 98 4 20 400 IP54/20 IP65 (5) plastic plug-in

'D3' 144x72 panel 136x66 92 3 45 600 IP54/20 plastic plug-in

Provides loop supply voltage - 24 VDC (only w/ isolated power supply) Double front panel sealing! Available ONLY for case 'H'

TC67U - G0.G1.G5G5.G9'9" - #1.#2

Code Feature or option

Code values

Case (front size)

H - 96x48 mm, D3 - 144x72 mm w/ 3-digit display, D4 - 144x72 mm w/ 4-digit display

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Relay output

X - none, C - relay NO/NC, D - SSR, J - for external SSR, M - isolated MOS gate

G9'

Serial interface

X - none, B - RS485

G9"

Protocol

A - ASCII, C - ASCII for "PolyMonitor"

Increased front protection

X - none, P - IP65 front protection (6)

Customer specified input signal

X - none, Z - custom linear signal (specify!) (3)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

-10...65 °C 0...85 %RH 'D4' 144x72 panel 136x66 92 4 32 600 IP54/20 plastic plug-in

COMECO reserves the right of changing specifications without prior notice!

Input

process indicators Programmable Process Indicator TC67U ♦ ♦ ♦ ♦ ♦ ♦ ♦

Technical specifications (programmable)

Outputs

Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Set point Alarms Serial interface

5A/250V w/ NO/NC contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF within input range limits programmable RS485, isolated

Accuracy Measurement error Temperature drift Cold junction compensation RTD line compensation

Power supply Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage Consumption

3 or 4 LED indicators 2 LEDs for output state 3 membrane keys

Digital display LEDs Keyboard

Operating conditions Operating temperature Operating humidity

(2)

(5)

Ordering code

230 VAC or 115 VAC 90…250 VAC/DC 12…24 VAC/DC or 24 VAC 12…24 VAC/DC max. 2 VA

Indication and controls

(1)

Up to 1000 °C for case 'D3' -199...999 for case 'D3' (3) Instead of linear current

0.3% from span 0.02% from span for 1 °C automatic, -10...80 °C automatic, up to 2 х 25 Ω

(6)

'H' 96x48 panel 90x42 98 4 20 400 IP54/20 IP65 (5) plastic plug-in

'D3' 144x72 panel 136x66 92 3 45 600 IP54/20 plastic plug-in

Provides loop supply voltage - 24 VDC (only w/ isolated power supply) Double front panel sealing! Available ONLY for case 'H'

TC67U - G0.G1.G5G5.G9'9" - #1.#2

Code Feature or option

Code values

Case (front size)

H - 96x48 mm, D3 - 144x72 mm w/ 3-digit display, D4 - 144x72 mm w/ 4-digit display

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Relay output

X - none, C - relay NO/NC, D - SSR, J - for external SSR, M - isolated MOS gate

G9'

Serial interface

X - none, B - RS485

G9"

Protocol

A - ASCII, C - ASCII for "PolyMonitor"

Increased front protection

X - none, P - IP65 front protection (6)

Customer specified input signal

X - none, Z - custom linear signal (specify!) (3)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

-10...65 °C 0...85 %RH 'D4' 144x72 panel 136x66 92 4 32 600 IP54/20 plastic plug-in

COMECO reserves the right of changing specifications without prior notice!

Input

process indicators 8-channel Programmable Indicator TC800 ♦ ♦ ♦ ♦ ♦

8 inputs, 8 outputs, and 16 alarms 2 displays ─ for measured value and for channel number Programmable ranges and alarms Self-testing and system-failure alarm RS485 serial interface available

The TC800 indicator is designed for multi-point control of technological variables. With its compact design, 8 inputs and outputs, TC800 successfully performs all the tasks of indicating, monitoring, and signaling the level of several channels. With the proper programming, any of the channels may be turned into a 2-or 3-state ON/OFF controller and even into a multistage controller. Motorized actuators may be controlled by using 2 relay outputs. The device input accepts thermoresistances, thermocouples, or standard current and voltage signals. Additional discrete inputs are available for remote channel switching and tampering protection. TC800 performs digital compensation for RTD sensor line resistance as well as thermocouple cold-junction compensation, and constantly monitors sensor and sensor-lead state. A rich set of parameters allows programming every aspect of controller operation and an RS485 serial interface allows network operation or connection to operator station.

Technical specifications (2...8 inputs) Pt10…1000 (w=1.385, 1.391) -100(-200)...200(850) °C (1) Cu50, Cu100 (w=1.426, 1.428) -50(0)...200 °C (1) (1) Other RTD min. -200...max. 850 °C Thermocouple "J" 0...800 °C Thermocouple "K" 0...1200 °C Thermocouple "S" 0...1600 °C Thermocouple "R" 0...1600 °C Thermocouple "B" 200...1800 °C Thermocouple "L" 0...1200 °C Thermocouple "L - GOST" 0...600 °C Thermocouple "E" 0...1000 °C Thermocouple "T" 0...400 °C Thermocouple "U" 0...600 °C (1) Other thermocouple min. 0...max. 2400 °C Linear voltage 0...1/ 2/ 5/ 10 V -999...9999, programmable Linear current 0(4)...20 mA -999...9999, programmable (1) Custom linear voltage; max. 40 V min. -999...max. 9999, programmable Custom linear current; max. 50 mA (1) min. -999...max. 9999, programmable

Accuracy

Discrete inputs

Ambient temperature Ambient humidity

Input signal type Input 1 function Input 2 function

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Alarms System-failure alarm Serial interface

(up to 2 inputs) contact, TTL, NPN, or PNP remote channel selection ext. programmed parameter protection (up to 9 relay outputs) (2) 3A/250V w/ NO (3) contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA up to 16, programmable activates SPDT EMR output No 9 RS485, isolated (4)

(1)

Measurement error Temperature drift Cold junction compensation RTD line compensation

0.4% from span 0.005% from span for 1 °C ± 1 °C, automatic software software

Power supply Mains supply voltage SMPS voltage Isolated low voltage Consumption

230 VAC or 115 VAC 90…250 V 12…24 V or 24 VAC max. 4 VA

Indication and controls Channel-number display Measured-value display LEDs Keyboard

2 green LED indicators, 14 mm 4 red LED indicators, 14 mm 8 LEDs for output state and 16 LEDs for alarm state 8 membrane keys

Operating conditions

Design and materials Case material Mounting Wiring Dimensions Mounting depth Weight Protection, front/terminals Increased front IP (option)

Custom; specify range within the limits stated. Relay No 9 is for system-failure alarm only (G10)! NO/NC for relay No 1 (4) With ASCII protocol, the outputs may be controlled only through the interface, and with binary protocol – only through the hardware! (2) (3)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

-10...65 °C 0...85 %RH plastic in 90x90 mm panel cut-out plug-in terminals 96x96(front)x107 mm 98 mm max. 650 g IP54 / IP20 IP65

COMECO reserves the right of changing specifications without prior notice!

Analog inputs

process indicators

Ordering code

TC800 - G1.G5─G5.G6'6"─G6'6".G7G7.G9'9".G10 - #1

Code Feature or option

Code values

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, Q - 12…24 V, isolated, R - 24 VAC

Relay output

X - none, A - relay NO (3), D - SSR, J - for external SSR, M - isolated MOS gate

G6'

Input signal

G6"

Sensor

B - thermoresistance, C - thermocouple, D - linear, Z - other on request RTD

B - Pt50, D - Pt100, F - Pt500, G - Pt1000, H - Cu50, K - Cu100, Z - other (1)

T/C

B - "B", E - "E", J - "J", K - "K", L - "L", M - "L-GOST", S - "S", R - "R", T - "T", U - "U", Z - other (1)

linear

B - 0…20 mA, C - 4…20 mA, H - 0…1 V, I - 0…2 V, J - 0…5 V, K - 0…10 V, Z - other (1)

Discrete input

X - none, A - contact, E - NPN, F - PNP, G - TTL

G9'

Serial interface

X - none, B - RS485

G9"

Protocol

A - ASCII, B - binary, C - ASCII for "PolyMonitor", D - binary for "PolyMonitor"

G10

System alarm

X - none, S - system-failure alarm relay

Increased front protection

X - none, P - IP65 front protection

COMECO reserves the right of changing specifications without prior notice!

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

process indicators Slim-size Bargraph Indicator TC150 ♦ ♦ ♦ ♦ ♦ ♦ ♦

Low-cost Analog design Current and voltage input signals 24x96 mm DIN-sized front panel 30-dot LED bargraph Moving dot / bar modes available Custom-design bargraph and scale available

TC150 is a slim-sized process indicator for panel mounting with 24x96 mm DIN front size. It accepts linear voltage or current signals at its input and is equipped with a 30-dot vertical LED bargraph, indicating the input value as a percentage of the input range and thereby presenting a convenient 'analog' reading. In combination with a level transmitter, TC150 provides a handy level indication. Moving dot and moving bar modes of the bargraph display as well as custom bargraph design are available. Low priced, TC150 with its useful features and slim front design can be widely applicable for a vast range of industrial solutions.

Technical specifications Input (1)

Power supply

Linear voltage

0…10, 20, 50, or 100 mV, 0…1, 2, 5, or 10 V 0(4)…20 mA min. 0...max. 40 V DC min. 0...max. 100 mA DC

Linear current (2) Custom linear voltage Custom linear current (2)

Accuracy

SMPS voltage Isolated low voltage Non-isolated low voltage Consumption

90…250 VAC/DC 12…24 VAC/DC 12…24 VAC/DC max. 4 VA

Operating conditions Operating temperature Operating humidity

-10...65 °C 0...85 %RH

Design and materials

Resolution Temperature drift

3.33% from span 0.02% from span for 1 °C

Bargraph display Type Scale Mode Color

30 LED dots, 2 mm wide 0…100% or custom design (2) moving dot or moving bar (2) red, green, or yellow

Case material Mounting Wiring Dimensions Mounting depth Weight Protection, front/terminals Increased front IP (option)

plastic in 21x93 mm panel cut-out plug-in terminals 24x96(front)x125 mm 120 mm max. 150 g IP54 / IP20 IP65

(1)

Provides loop supply voltage - 24 VDC (only w/ isolated power supply) Specify when ordering! (3) Ask for availability! (2)

Ordering code

TC150 - G1.G2.G6'6" - #1

Code Feature or option

Code values

Power supply

C - 90…250 V, P - 12…24 V, non-isolated, Q - 12…24 V, isolated

Bargraph display

D1 - w/ moving dot, D2 - w/ moving bar, Z - custom design (specify!)

G6'6"

Input (1)

DA - 0...5 mA, DB - 0...20 mA, DC - 4...20 mA, DE - 0...10 mV, DF - 0...20 mV, DG - 0...50 mV, DH - 0...1 V, DI - 0...2 V, DJ - 0...5 V, DK - 0...10 V, DZ - other

Increased front protection

X - none, P - IP65 front protection

COMECO reserves the right of changing specifications without prior notice!

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA, tel: +359 32 646524, fax: +359 32 634089, e-mail:

exp

process indicators Programmable Bargraph Display TI250 ♦ ♦ ♦ ♦ ♦ ♦ ♦

Tri-color fully programmable 30-dot LED bargraph 3-digit bright LED indication Universal linear input Up to 2 alarm relays available with pulsed output 48x96 mm DIN-sized front panel Moving dot / bar programmable modes Custom-design bargraph and scale available

TI250 is a versatile and non-expensive combination of TI08 programmable process indicator in 48x96mm DIN case and a fully programmable Tri-color LED bargraph. It is designed for wide range of display applications with/without relay alarm. Equipped with a bright 3-digit LED display, this model is suitable for measuring and controlling various technological values from -199 to 999 with programmable resolution. The device may be also equipped with up to 2 programmable relays providing ON/OFF control/alarm with or without pulse mode. TI250 bargraph display allows user programming of every LED dot color, dot/bar display mode as well as customized scale. Like TI08 the unit accepts various linear input voltage or current signals. Display limits, decimal point position, measurement offset value as well as many other parameters are fully programmable. Thanks to its rich display features and excellent price-to-performance ratio, TI250 can be a very useful and widely applicable device.

Technical specifications Input Linear voltage 0...10 V Linear voltage 0...5 V Linear current 0(4)...20 mA Custom linear (option) Two-wire external transmitter Decimal point selection

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Alarms

(programmable) -199...999, programmable -199...999, programmable -199...999, programmable -199...999, programmable 4...20 mA (1) programmable (up to 2 relay outputs) 5A/250V w/ NO/NC contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF, pulse mode programmable

Digital display Design Measurement accuracy Resolution Temperature drift

3 LED indicators, 10 mm 0.3% from span programmable 0.02% from span for 1 °C

Bargraph display Design Scale Mode Color (2) (3)

Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage External mains transformer (2) Consumption

230 VAC or 115 VAC 90…250 VAC/DC 12…24 VAC/DC or 24 VAC 12…24 VAC/DC 9(12) VAC max. 3 VA

Indication and controls LEDs Keyboard

2 LEDs for output state 3 membrane keys, lockable

Operating conditions Operating temperature Operating humidity Storage temperature Storage humidity

-10...65 °C 0...85 %RH -20...65 °C 0...95 %RH, non-condensing

Design and materials Case material Mounting Wiring Dimensions Mounting depth Weight Protection, front/terminals Increased front IP (option)

plastic in 42x90 mm panel cut-out plug-in terminals 48x96(front)x107 mm 98 mm max. 300 g IP54 / IP20 IP65

Provides loop supply voltage - 24 VDC (only w/ isolated power supply) Ordered separately (see 'Accessories') Specify when order!

Ordering code

TI250 - G1.G2.G5G5 - #1.#2

Code Feature or option

Code values

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, E - 9(12) VAC w/ external transformer (2), P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Bargraph display scale

D - standard (0...100%), Z - custom design (specify!)

Relay output

X - none, C - relay NO/NC, D - SSR, J - for external SSR, M - isolated MOS gate

Increased front protection

X - none, P - IP65 front protection

Customer specified input signal

X - none, Z - custom linear signal (specify!)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

(1)

30 LED dots, 2 mm wide 0…100% or custom design (3) programmable: dot or bar programmable: red, green, or yellow

Power supply

process indicators Bargraph Indicator TC66 ♦ ♦ ♦ ♦ ♦ ♦ ♦

Low-cost 4-digit LED display plus 50-dot bargraph Various input signals Well protected from electromagnetic disturbances Moving dot / bar modes available Auxiliary input for display brightness control Custom-design bargraph and scale available

In addition to the digital display, showing the exact value of the measured variable, the TC66 process indicator is equipped with a LED bargraph, indicating the input value as a percentage of the input range and thereby presenting more convenient 'analog' reading. Two variants of the indicator are available: one with a linear, horizontal bargraph ('D') and one with a bargraph in the shape of a 240-degree arc, which provides a visualization resembling that of a traditional pointer-and-dial gauge ('B'). Moving dot and moving bar modes of the bargraph display as well as custom bargraph design are available. Both TC66 variants feature a customized front-panel tag denoting the range and the measurement unit of the monitored physical quantity. The indicator may also be equipped with an auxiliary DC input for display brightness control. The low-priced, low-maintenance TC66 is widely applicable in boat building, power plants, and other industrial areas.

Technical specifications Input

Power supply

Linear voltage 0…10 mV (1) Linear voltage 0…20 mV (1) Linear voltage 0…50 mV (1) Linear voltage 0…100 mV (1) Linear voltage 0…1 V (1) Linear voltage 0…2 V (1) Linear voltage 0…5 V (1) Linear voltage 0…10 V (1) Linear current 0…5 mA (1) Linear current 0(4)…20 mA (1) Custom linear voltage; max. 40 V (1) Custom linear current; max. 50 mA (1) Decimal point position Display range Brightness control (option) (3)

min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) min. -1999...max. 1999 (2) x1, x0.1, x0.01, x0.001 specified by customer min. 0...max. 24 VDC

Accuracy 0.4% from span 0.02% from span for 1 °C

Measurement error Temperature drift

Indication and controls 4 LED indicators 50 LED dots, 0...100%

Digital display Bargraph display (4)

Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage Consumption

230 VAC or 115 VAC 90…250 VAC/DC 12…24 VAC/DC or 24 VAC 12…24 VAC/DC max. 4 VA

Operating conditions -10...65 °C 0...85 %RH

Operating temperature Operating humidity

Design and materials Front dimensions [mm] Mounting Panel cutout [mm] Mounting depth [mm] Display digit height [mm] Bargraph shape Maximum weight [g] Protection, front/terminals Case material Wiring

'B'

'D'

96x96 panel 90x90 98 10 240° arc 650 IP54 / IP20 plastic plug-in terminals

144x72 panel 136x66 92 14 horizontal bar 650 IP54 / IP20 plastic plug-in terminals

(1)

Specify lower and upper display limits. Provides loop supply voltage - 24 VDC (only w/ isolated power supply) Specify range within the limits stated. (4) Custom display or/and scale design is also available. Ask!

(2)

Ordering code

TC66 - G0.G1.G2.G3.G6'6" - #1

Code Feature or option

Code values

Case (front size)

B - 96x96 mm, D - 144x72 mm

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Bargraph display

D1 - w/ moving dot, D2 - w/ moving bar, Z - custom design (specify!)

Resolution

B - 1, C - 0.1, D - 0.01, E - 0.001

(1)

G6'6"

Input

Auxiliary input

DA - 0...5 mA, DB - 0...20 mA, DC - 4...20 mA, DE - 0...10 mV, DF - 0...20 mV, DG - 0...50 mV, DH - 0...1 V, DI - 0...2 V, DJ - 0...5 V, DK - 0...10 V, DZ - other X - none, BC - input for brightness control mounted (3)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

(3)

process indicators Programmable Bargraph Indicator TC600 ♦ ♦ ♦ ♦ ♦ ♦

4-digit LED display plus 50-dot bargraph Various input signals and nonlinearities Programmable ranges and alarms Programmable relay and linear outputs Serial interface available Self-testing and self-calibration

TC600 is a microprocessor-based programmable process indicator with alarm relay outputs. In addition to the digital display, indicating the measured value, the device features a 50-dot LED bar-graph, showing the input value as a percentage of the input range. A changeable front-panel tag indicates the measurement unit. TC600 accepts standard current or voltage signals as well as signals from various thermoresistances and thermocouples. The device software allows programming display range, alarm value and type, and various nonlinear input-to-display transformations. Besides the relay alarm outputs, the indicator may be equipped with a digital interface and an analog retransmission output. The low price and the rich set of functions make TC600 widely applicable in industry and especially in power plants.

Technical specifications Input

Power supply

Pt50…1000 (w=1.385, 1.391) Cu50, Cu100 (w=1.426, 1.428) Other RTD (1) Thermocouple "J" Thermocouple "K" Thermocouple "S" Other thermocouple (1) Linear voltage 0…10 V Linear current 0(4)…20 mA Custom linear voltage; max. 40 V (1) Custom linear current; max. 50 mA (1) Decimal point selection Digital-display range Bargraph range Nonlinear transformation

-99.9(-200)...199.9(800) °C -50.0...199.9 °C min. -200...max. 1000 °C -100...900 °C 0...1200 °C 0...1600 °C min. -200...max. 2400 °C -1999...9999 (2) -1999...9999 (2) min. -1999...max. 9999 (2) min. -1999...max. 9999 (2) programmable programmable programmable up to 6 conversion modules (up to 2 relay and 1 analog) 5A/250V with NO/NC contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA programmable 4(0)...20 mA or 0...10 V, isolated RS232 or RS485, isolated

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Alarm set point Analog retransmission output Serial interface (3)

Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage Consumption

Indication and controls Digital display Bargraph display (4) LEDs Keyboard

Design and materials Front dimensions [mm] Mounting Panel cutout [mm] Mounting depth [mm] Display digit height [mm] Bargraph shape Maximum weight [g] Protection, front/terminals Case material Wiring

0.4% from span 0.01% from span for 1 °C hardware, ± 1 °C

Custom; specify range within the limits stated Provides loop supply voltage - 24 VDC (only w/ isolated power supply)

Ordering code

-10...65 °C 0...85 %RH

Ambient temperature Ambient humidity

(3) (4)

'B'

'D'

96x96 panel 90x90 98 9 240° arc 650 IP54 / IP20 plastic plug-in terminals

144x72 panel 136x66 92 14 horizontal bar 650 IP54 / IP20 plastic plug-in terminals

Ask for availability! Custom display or/and scale design is also available. Ask!

TC600 - G0.G1.G5G5.G6'6".G9'9".G11 - #1

Code Feature or option

Code values

Case (front size)

B - 96x96 mm, D - 144x72 mm

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Relay output

X - none, C - relay NO/NC, D - SSR, J - for external SSR, M - isolated MOS gate

G6'

Input signal

B - thermoresistance, C - thermocouple, D - linear, Z - other on request

G6"

Sensor

RTD

B - Pt50, D - Pt100, F - Pt500, G - Pt1000, H - Cu50, K - Cu100, Z - other (1)

T/C

J - "J", K - "K", S - "S", Z - other (1)

linear

B - 0…20 mA, C - 4…20 mA, K - 0…10 V, Z - other (1)

G9'

Serial interface

X - none, A - RS232 (3), B - RS485 (3)

G9"

Protocol

A - ASCII, C - ASCII for "PolyMonitor"

G11

Analog retransmission output

X - none, E - 0…20 mA, F - 4…20 mA, K - 0…10 V

Nonlinear trans formation

X - none, HC - horizontal cylinder, LC - lying cylindrical tank, SC - standing cylindrical tank, SN - standing conical tank, SP - spherical tank, QR - square root, Z - other

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

(1) (2)

4 LED indicators 50 LED dots 2 LEDs for output state 4 membrane keys

Operating conditions

Accuracy Measurement error Temperature drift Cold junction compensation

230 VAC or 115 VAC 90…250 V 12…24 V or 24 VAC 12…24 V max. 5 VA

process indicators Programmable Bargraph Indicator TC600 ♦ ♦ ♦ ♦ ♦ ♦

Technical specifications Input

Power supply

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Alarm set point Analog retransmission output Serial interface (3)

Mains supply voltage SMPS voltage Isolated low voltage Non-isolated low voltage Consumption

Indication and controls Digital display Bargraph display (4) LEDs Keyboard

Design and materials Front dimensions [mm] Mounting Panel cutout [mm] Mounting depth [mm] Display digit height [mm] Bargraph shape Maximum weight [g] Protection, front/terminals Case material Wiring

0.4% from span 0.01% from span for 1 °C hardware, ± 1 °C

Custom; specify range within the limits stated Provides loop supply voltage - 24 VDC (only w/ isolated power supply)

Ordering code

-10...65 °C 0...85 %RH

Ambient temperature Ambient humidity

(3) (4)

'B'

'D'

96x96 panel 90x90 98 9 240° arc 650 IP54 / IP20 plastic plug-in terminals

144x72 panel 136x66 92 14 horizontal bar 650 IP54 / IP20 plastic plug-in terminals

Ask for availability! Custom display or/and scale design is also available. Ask!

TC600 - G0.G1.G5G5.G6'6".G9'9".G11 - #1

Code Feature or option

Code values

Case (front size)

B - 96x96 mm, D - 144x72 mm

Power supply

A - 230 VAC, B - 115 VAC, C - 90…250 V, P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Relay output

X - none, C - relay NO/NC, D - SSR, J - for external SSR, M - isolated MOS gate

G6'

Input signal

G6"

Sensor

B - thermoresistance, C - thermocouple, D - linear, Z - other on request RTD

B - Pt50, D - Pt100, F - Pt500, G - Pt1000, H - Cu50, K - Cu100, Z - other (1)

T/C

J - "J", K - "K", S - "S", Z - other (1)

linear

B - 0…20 mA, C - 4…20 mA, K - 0…10 V, Z - other (1)

G9'

Serial interface

X - none, A - RS232 (3), B - RS485 (3)

G9"

Protocol

A - ASCII, C - ASCII for "PolyMonitor"

G11

Analog retransmission output

X - none, E - 0…20 mA, F - 4…20 mA, K - 0…10 V

Nonlinear transformation

X - none, HC - horizontal cylinder, LC - lying cylindrical tank, SC - standing cylindrical tank, SN - standing conical tank, SP - spherical tank, QR - square root, Z - other

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA, tel: +359 32 646524, fax: +359 32 634089, e-mail: export@comeco.org

COMECO reserves the right of changing specifications without prior notice!

(1) (2)

4 LED indicators 50 LED dots 2 LEDs for output state 4 membrane keys

Operating conditions

Accuracy Measurement error Temperature drift Cold junction compensation

230 VAC or 115 VAC 90…250 V 12…24 V or 24 VAC 12…24 V max. 5 VA

process indicators Loop-powered Indicator TI200 ♦ ♦ ♦ ♦ ♦ ♦ ♦

Panel, in-head, or free mounting IP65 box and Ex housing available 4-digit LCD or LED display Down to 2 mA operating loop current Programmable display ranges and alarms 2 alarm outputs Built-in temperature transmitter available

TI200 is a microprocessor-based programmable process indicator, designed especially to be powered from the input current loop. TI200 is equipped with a fully programmable -1999...9999 LCD or LED display with programmable point position and digital filter as well as with a 2-key (hidden) keyboard. Two alarm limits with programmable parameters – set point, hysteresis, direction, dead time, etc – control 2 alarm outputs (polarized relay type or open collector type, which can be used to control external relays). Five different housing types are available: − plastic case for panel mounting with 96x96 mm DIN front size; − plastic case for panel mounting with 96x48 mm DIN front size; − plastic box with IP65 protection class and 80x80 mm front size; − housing for mounting into sensor protection head type "DW" or "DHW"; − housing for mounting into sensor protection head type "EGW". The IP65-box housing allows a standard in-head transmitter to be incorporated inside the box so TI200 can be used as a temperature or level transmitter with local programmable display. The low price, alarm features, and flexibility make TI200 widely applicable in industry and especially when loop current transmission is measured.

Technical specifications Input

Indication and controls

Input type Operating range Measurement range Display range Display-to-input correspondence Decimal point selection

Outputs Non-isolated transistor gate Polarized relay Control algorithm Alarms

loop supply DC current 3...22 mA 4...20 mA min. -1999...max. 9999 programmable programmable (set of 2 alarm outputs) open collector, 100mA/40V 5A/250V w/ NO contact ON/OFF programmable

Accuracy ± 0.05% from span ± 1 digit within measurement error 0.025% from span for 1 °C

Measurement error Non-linearity Temperature drift

Power supply 4...36 VDC 2...50 mA

Loop supply voltage Loop supply current

4 LCD (plus backlight), 13 mm or 4 LED indicators, 14 mm 2 (hidden) keys

Digital display Keyboard

Operating conditions -10...65 °C 0...85 %RH (1)

Operating temperature Operating humidity

Design and materials Front dimensions [mm] Mounting Panel cutout [mm] Mounting depth [mm] Maximum weight [g] Protection, front/terminals Increased front IP (option) Case material Wiring (terminals)

'B'

'H'

'Y'

'Z1'

'Z2'

96x96 96x48 80x80 ø63 ø73 panel panel free (2) in head (3) in head 90x90 90x42 98 23 60 98 23 200 60 200 300 60 IP65 IP65 IP54/20 IP54/20 IP68 (4) IP65 IP65 plastic plastic plastic aluminum aluminum spring plug-in plug-in screw spring

(1)

0...95 %RH for case 'Y' Radial, axial, and DIN-rail mounting accessories for 80x80x60 mm box can be ordered separately (see 'Accessories') May be mounted in different, separately ordered Ex housings for field applications (see 'Accessories') (4) Ask for availability! (2)

Ordering code

TI200 - G0.G2.G5 - #1.#2.#3

Code Feature or option

Code values

Case

B - for panel mounting, 96x96 mm, H - for panel mounting, 96x48 mm, Y - box IP65, Z1 - for mounting in head type "DW" or "DHW" (3), Z2 - for mounting in head type "EGW" (3)

Display

A - LCD, B - LED, T - LCD + backlight

Relay outputs (set of 2 alarm outputs)

X - none, A - relays NO, E - open collectors NPN, F - open collectors PNP

Increased front protection

X - none, P - IP65 front protection (5)

Temperature transmitter

X - none, TT - built-in temperature transmitter (6)

Mounting kit

X - none, E - kit for mounting in Ex housing (7)

(5)

Not available for cases 'Y', 'Z1', and 'Z2'. Ask for case 'B'! Available ONLY for case 'Y'! Specify exact transmitter type and specifications separately. (7) Only for cases 'Z1' (for mounting in instrument housing EX) and 'Z2' (for mounting in head type "EGW") (6)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

(3)

process indicators Loop-powered Indicator TI200 ♦ ♦ ♦ ♦ ♦ ♦ ♦

Technical specifications Input

Indication and controls

Input type Operating range Measurement range Display range Display-to-input correspondence Decimal point selection

Outputs Non-isolated transistor gate Polarized relay Control algorithm Alarms

loop supply DC current 3...22 mA 4...20 mA min. -1999...max. 9999 programmable programmable (set of 2 alarm outputs) open collector, 100mA/40V 5A/250V w/ NO contact ON/OFF programmable

Accuracy ± 0.05% from span ± 1 digit within measurement error 0.025% from span for 1 °C

Measurement error Non-linearity Temperature drift

Power supply 4...36 VDC 2...50 mA

Loop supply voltage Loop supply current

4 LCD (plus backlight), 13 mm or 4 LED indicators, 14 mm 2 (hidden) keys

Digital display Keyboard

Operating conditions -10...65 °C 0...85 %RH (1)

Operating temperature Operating humidity

Design and materials Front dimensions [mm] Mounting Panel cutout [mm] Mounting depth [mm] Maximum weight [g] Protection, front/terminals Increased front IP (option) Case material Wiring (terminals)

'B'

'H'

'Y'

'Z1'

'Z2'

(1)

Ordering code

TI200 - G0.G2.G5 - #1.#2.#3

Code Feature or option

Code values

Case

B - for panel mounting, 96x96 mm, H - for panel mounting, 96x48 mm, Y - box IP65, Z1 - for mounting in head type "DW" or "DHW" (3), Z2 - for mounting in head type "EGW" (3)

Display

A - LCD, B - LED, T - LCD + backlight

Relay outputs (set of 2 alarm outputs)

X - none, A - relays NO, E - open collectors NPN, F - open collectors PNP

Increased front protection

X - none, P - IP65 front protection (5)

Temperature transmitter

X - none, TT - built-in temperature transmitter (6)

Mounting kit

X - none, E - kit for mounting in Ex housing (7)

(5)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

(3)

process indicators Loop-powered Indicator TI200 ♦ ♦ ♦ ♦ ♦ ♦ ♦

Technical specifications Input

Indication and controls

Input type Operating range Measurement range Display range Display-to-input correspondence Decimal point selection

Outputs Non-isolated transistor gate Polarized relay Control algorithm Alarms

loop supply DC current 3...22 mA 4...20 mA min. -1999...max. 9999 programmable programmable (set of 2 alarm outputs) open collector, 100mA/40V 5A/250V w/ NO contact ON/OFF programmable

Accuracy ± 0.05% from span ± 1 digit within measurement error 0.025% from span for 1 °C

Measurement error Non-linearity Temperature drift

Power supply 4...36 VDC 2...50 mA

Loop supply voltage Loop supply current

4 LCD (plus backlight), 13 mm or 4 LED indicators, 14 mm 2 (hidden) keys

Digital display Keyboard

Operating conditions -10...65 °C 0...85 %RH (1)

Operating temperature Operating humidity

Design and materials Front dimensions [mm] Mounting Panel cutout [mm] Mounting depth [mm] Maximum weight [g] Protection, front/terminals Increased front IP (option) Case material Wiring (terminals)

'B'

'H'

'Y'

'Z1'

'Z2'

(1)

Ordering code

TI200 - G0.G2.G5 - #1.#2.#3

Code Feature or option

Code values

Case

B - for panel mounting, 96x96 mm, H - for panel mounting, 96x48 mm, Y - box IP65, Z1 - for mounting in head type "DW" or "DHW" (3), Z2 - for mounting in head type "EGW" (3)

Display

A - LCD, B - LED, T - LCD + backlight

Relay outputs (set of 2 alarm outputs)

X - none, A - relays NO, E - open collectors NPN, F - open collectors PNP

Increased front protection

X - none, P - IP65 front protection (5)

Temperature transmitter

X - none, TT - built-in temperature transmitter (6)

Mounting kit

X - none, E - kit for mounting in Ex housing (7)

(5)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

(3)

process indicators Battery-Powered Thermometer TIB100 ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦

Operates with TSEC temperature probes Direct in-process mounting All stainless steel design 4-digit 18 mm LCD display Captures minimum and maximum readings Powered by 2 AA batteries 20000 hours average battery life Programmable display ranges and alarms User calibration available Selectable temperature units

COMECO's TIB100 is a digital temperature indicator, designed for direct control over temperature processes when coupled with a TSEC or other compatible temperature probe. This model combines the power supply independence of the bimetallic/gas thermometers and the advantages of the digital temperature measuring instruments. TIB100 is a programmable device and allows current, minimum, and maximum temperature readings, alarm settings, unit selection, and user calibration.

Technical specifications Input

Power supply Pt100 (1), Pt500 (1), Pt1000 min. -50.0...max. 600 °C (min. -58.0...max. 1112.0 °F)

Input (sensor) type Measurement range

Accuracy Display measurement error Non-linearity Hysteresis Repeatability Temperature drift

≤ ± 0.3% of span within measurement error within measurement error within measurement error 0.005% from span for 1 °C

Indication and controls 4-digit LCD, 18 mm 0.1 or 1 °C, programmable on/off, °C/°F/K, min/max, auto off 3 membrane keys through the keyboard 2 programmable alarms on display

Digital display Display resolution Display functions Keyboard Device calibration Alarms

Supply voltage Battery life Battery state control Auto-power-off time

3 V from 2 batteries AA 1.5 V up to 20000 h (2) automatic 0...100 min, programmable

Operating conditions -10...50 °C 0...85 %RH

Ambient temperature Ambient humidity

Design and materials Case material Mounting Probe connection Dimensions Weight Protection class

stainless steel on probe top (3) G3/8", 3/8" NPT, G1/2", 1/2" NPT, M16x1.5, M18x1.5, or welding (4) axial: approx. ø100x50 mm; radial: approx. 100x120x35 mm max. 700 g IP65 (NEMA 4X)

(1)

Ask for availability! Depending on battery type, sensor, and operating mode Order separately! Suitable for assembly are temperature probes type TSEC (see 'Temperature Probes'). (4) Available only when an axial mounted probe is ordered. (2)

(3)

TIB100 - G1.G6'6".G12'12"

Code Feature or option

(5)

Code values

Power supply

X - none (5), G - long-life batteries

G6'6"

Input

BD - Pt100 (1), BF - Pt500 (1), BG - Pt1000

G12'

Probe connection

Q0 - M16x1.5, Q1 - M18x1.5, Q3 - G3/8", Q4 - G1/2", Q9 - 3/8" NPT, Q10 - 1/2" NPT, Uxx - female thread (xx - same as for Qxx), W - welding (4), Z - other (specify!)

G12"

Probe position

A - axial, R - radial underneath, RU - radial on top, RL - radial on the left, RR - radial on the right

The device is supplied without batteries.

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

Ordering code

process controllers Temperature Controller TC48 ♦ ♦ ♦ ♦ ♦ ♦

Low price 48x48 DIN-sized front panel Thermocouple or Pt100 RTD input Independent set-point observation Sensor break indication Panel, DIN-rail, and in-socket mounting

The TC48 temperature controller has no temperature value indication and thus is applicable in cases, in which the low price is one of the major requirements, especially in food industry and household applications. With its 48x48 mm DIN-sized front panel, TC48 is best suited for applications, in which small size is important too. The device works with either an RTD temperature sensor or a thermocouple type "J" or "K" and can be used for controlling various temperature processes and driving electrical actuators by the means of a relay control output and through ON/OFF algorithm. A potentiometer and a dial on the front panel enable easy set-point adjustment, and a red LED – a clear sensor break indication. The controller can be mounted on a panel, on a rail, and in a socket. Inexpensive, compact, and easy-to-use, the TC48 temperature controller is one versatile general-purpose control device.

Technical specifications Input

Indication and controls 0...100 °C, 0...200 °C, 0...400 °C (1) 0...100 °C, 0...200 °C, 0...400 °C, 0...800 °C (1) 0...400 °C, 0...800 °C, 0...1000 °C, 0...1200 °C (1)

Pt100 (w=1.385); 3-wire Thermocouple "J" Thermocouple "K"

LEDs Front-panel potentiometer Front-panel trimmer potentiometer

LED for relay state, LED for sensor break for set-point adjustment for hysteresis adjustment

Output Relay electromechanical Solid state relay (2) MOS gate (2) Output for external SSR Control algorithm Set point

5A/250V w/ NO/NC or NO contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF within input range limits

Accuracy Measurement error Temperature drift Cold junction compensation

0.5% from span 0.007% from span for 1 °C ± 1 °C

Power supply 230 VAC or 115 VAC 24 VAC max. 3 VA

Mains supply voltage Isolated low voltage (2) Consumption (2) (3)

-10...65 °C 0...85 %RH

Operating temperature Operating humidity

Design and materials Case material Mounting Wiring Dimensions Mounting depth Weight Protection, front/terminals

plastic in 45x45 mm panel cut-out or on 35 mm DIN rail socket (3) OCTAL or UNDECAL 48x48(front)x95 mm 103 mm (w/ socket) max. 250 g IP40 / IP20

Specify range when ordering. Ask for availability! Ordered separately (see 'Accessories')

Ordering code

TC48 - G1.G5.G6'6"

Code Feature or option

Code values

Power supply

A - 230 VAC, B - 115 VAC, R - 24 VAC (2)

Relay output

X - none, C - relay NO/NC, D - SSR (2), J - for external SSR, M - isolated MOS gate (2)

G6'6"

Input

(1)

BD - Pt100, CJ - thermocouple "J", CK - thermocouple "K"

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

(1)

Operating conditions

process controllers All-purpose Analog Controller TC56 ♦ ♦ ♦ ♦

Very good EMI protection User-friendly controls Analog retransmission output 4-digit LED display

TC56 is an electronic analog controller with very good protection against electromagnetic disturbances, used for automatic control of various processes through relay outputs employing ON/OFF control algorithm. The device can operate with a number of input signal types – thermoresistive, thermoelectrical, or standard signals from relative humidity, pressure, flow, etc. transmitters – at that providing supply for input signal transmitters. In addition to the 2 control or alarm relay outputs, the TC56 controller can be equipped with an analog retransmission output that generates standard signal to external chart recorders, controllers, and indicators.

Technical specifications Input

Accuracy

Pt46 (GOST) Pt50 (w=1.385, 1.391) Pt100 (w=1.385, 1.391) Pt500 (w=1.385) Pt1000 (w=1.385) Cu100 (w=1.426, 1.428) Cu50 (w=1.426, 1.428) Cu53 (GOST) Other RTD (1) Thermocouple "J" Thermocouple "K" Linear voltage 0…1/ 2 / 5/ 10 V Linear current 0…5 mA Linear current 0(4)…20 mA Custom linear voltage; max. 10 V Custom linear current; max. 50 mA

-50...199.9(600) °C -50...199.9(600) °C -50...199.9(600) °C -50...199.9(600) °C -50...199.9(600) °C -50...199.9(200) °C -50...199.9(200) °C -50...199.9(200) °C min. -99...max. 600 °C 0...700 °C 0...700(1200) °C -199.9(1999)...199.9(1999) (2,3) -199.9(1999)...199.9(1999) (2,3) -199.9(1999)...199.9(1999) (2,3) min. -1999...max. 1999 (2,3) min. -1999...max. 1999 (2,3) (up to 3 outputs) 5A/250V w/ NO/NC contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF within input range limits 2 control or 1 control and 1 alarm 0(4)...20 mA or 0...10 V none

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Set point Relay function Analog retransmission output Isolation

0.5% from span 0.007% from span for 1 °C automatic hardware, ± 1 °C

Measurement error Temperature drift Cold junction compensation

Power supply 230 VAC or 115 VAC 24 VAC max. 4 VA

Mains supply voltage Isolated low voltage Consumption

Indication and controls Digital display LEDs Multi-turn potentiometer Front-panel trimmer Case-side trimmers

4 LED indicators, 14 mm 2 LEDs for relay-output state for set-point adjustment (4) for hysteresis and dead-band adjustment for alarm-limit adjustment

Operating conditions -10...65 °C 0...85 %RH

Operating temperature Operating humidity

Design and materials Case material Mounting Wiring Dimensions Mounting depth Weight Protection, front/terminals

plastic on 90x42 mm panel cut-out plug-in terminals 96x48(front)x107 mm 98 mm max. 400 g IP40 / IP20

(1)

Custom; specify range within the limits stated Specify lower and upper display limits Provides loop supply voltage - 24 VDC (4) Displayed while the set-point button is pressed (2) (3)

TC56 - G1.G3.G5G5.G6'6".G10.G11

Code Feature or option

Code values

Power supply

A - 230 VAC, B - 115 VAC, R - 24 VAC

Resolution

B - 1, C - 0.1

Relay output

X - none, C - relay NO/NC, D - SSR, J - for external SSR, M - isolated MOS gate

G6'

Input signal

B - thermoresistance, C - thermocouple, D - linear A - Pt46, B - Pt50, C - Pt50, D - Pt100, E - Pt100, F - Pt500, G - Pt1000, H - Cu50, I - Cu50, J - Cu53, K - Cu100, L - Cu100, Z - other (1)

RTD G6"

Sensor

T/C linear

J - "J", K - "K" (2)

A - 0...5 mA, B - 0...20 mA, C - 4...20 mA, H - 0...1 V, I - 0...2 V, J - 0...5 V, K - 0...10 V, Z - other

G10

Alarm

X - none, A - absolute upper, B - absolute lower, C - absolute mixed, D - relative above set point, E - relative below set point

G11

Analog retransmission output

X - none, E - 0…20 mA, F - 4…20 mA, K - 0…10 V, Z - other

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA,

COMECO reserves the right of changing specifications without prior notice!

Ordering code

process controllers Programmable Controller RT28U ♦ ♦ ♦ ♦ ♦ ♦

Low cost 3-digit bright LED display 4 DIN cases Universal input for 4 RTDs, 6 T/Cs, and 4 linear types Keyboard or encoder adjustment controls RS485 serial interface available

RT28U is designed for wide range of applications. It is equipped with a 3-digit LED display, a universal input for Pt100, Pt1000, PTC, 6 thermocouple types as well as for linear current, voltage, and resistive signals from external transmitters and can have up to 2 programmable relay control/alarm outputs. RT28U can be ordered with either keyboard, or unique rotating encoder for set-point adjustment and programming. All modifications have a built-in circuit for self-testing and self-calibration, manual measurement offset setting, and automatic software compensation of line resistance and cold junction temperature. The display-toinput correspondence (in case of linear input), decimal point position, temperature measurement unit, and offset value are also programmable. Thanks to its universal input, the available various enclosures, serial interface, and excellent price-to-performance ratio, RT28U is an exceptionally widely applicable device.

Technical specifications (programmable)

Pt100 (w=1.385); 3-wire Pt1000 (w=1.385); 3-wire PTC (1k at 25 °C); 3-wire PTC (2k at 25 °C); 3-wire Thermocouple "T" Thermocouple "J" Thermocouple "K" Thermocouple "S" Thermocouple "R" Thermocouple "B" Linear voltage 0...10 V Linear current 0(4)...20 mA Linear resistive 0...1 kΩ Custom linear (option) (1) Two-wire external transmitter Manual input offset Input type selection Decimal point selection Temperature measurement unit

Outputs

-100...850 °C -100...600 °C -50...150 °C -50...150 °C -40...400 °C -20...999 °C -20...999 °C 0...999 °C 0...999 °C 100...999 °C -199...999, programmable -199...999, programmable -199...999, programmable -199...999, programmable 4...20 mA (2) programmable programmable programmable °C or °F, programmable (up to 2 relay outputs)

Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Set point Alarms Serial interface

5A/250V w/ NO/NC or NO (3) contact 1A/250VAC (4) 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF within input range limits programmable RS485, isolated

(1)

Instead of linear current Provides loop supply voltage - 24 VDC (only w/ isolated power supply). (3) For case 'S' w/ SMPS, 1st relay is NO; for case 'L' and case 'S' w/ serial interface, 2nd relay is NO. (4) 0.2A/250VAC for case 'L' (5) 0.5% for T/Cs "S", "R", and "B" (2)

Ordering code

Accuracy 0.3% (5) from span 0.02% from span for 1 °C automatic, -10...80 °C automatic, up to 2 х 25 Ω

Measurement error Temperature drift Cold junction compensation RTD line compensation

Power supply Mains supply voltage (6) SMPS voltage Isolated low voltage Non-isolated low voltage External mains transformer (7) Consumption

230 VAC or 115 VAC 90…250 V 12…24 V or 24 VAC 12…24 V 9(12) VAC max. 1.5 VA

Indication and controls Digital display LEDs Controls

3 LED indicators 2 LEDs for output state keyboard w/ 3 keys or rotary encoder (8)

Operating conditions Ambient temperature Ambient humidity

'B' 96x96 panel 90x90 98 20 350 IP54/20 IP65 (9) plastic plug-in

'H' / 'V' 96x48 panel 90x42 98 14 300 IP54/20 IP65 plastic plug-in

-10...65 °C 0...85 %RH 'S' 'L' 48x48 72x36 panel panel 45x45 71x29 56 100 14 10 150 200 IP54/20 IP54/20 IP65 plastic plastic screw screw

(6)

Not available for case 'L'. Ordered separately (see 'Accessories') Available ONLY for cases 'H', 'V', and 'B'. (9) Ask for availability! (10) Not available for case 'S'. (7)

(8)

RT28U - G0.G1.G4.G5G5.G9'9" - #1.#2

Code Feature or option

Code values

Case (front size)

B - 96x96 mm, H - 96x48 mm, V - 48x96 mm, S - 48x48 mm, L - 72x36 mm

Power supply

A - 230 VAC (6), B - 115 VAC (6), C - 90…250 V, E - 9(12) VAC w/ external transformer (7), P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Adjustment controls

A - keyboard, H - rotary encoder (8)

Relay output

X - none, A - relay NO (3), C - relay NO/NC (3), D - SSR, J - for external SSR, M - isolated MOS gate

G9'

Serial interface

X - none, B - RS485

G9"

Protocol

A - ASCII, C - ASCII for "PolyMonitor"

Increased front protection

X - none, P - IP65 front protection (10)

Customer specified input signal

X - none, Z - custom linear signal (specify!) (1)

Comeco Inc., P.O.Box 378, Plovdiv 4000, BULGARIA, tel: +359 32 646524, fax: +359 32 634089, e-mail: export@comeco.org

COMECO reserves the right of changing specifications without prior notice!

Input

process controllers Programmable Controller RT28U-R ♦ ♦ ♦ ♦ ♦

Low cost DIN-rail case and 11-pin box for rail mounting 3-digit bright LED display Universal input for 4 RTDs, 6 T/Cs, and 4 linear types RS485 serial interface available

RT28U-R is a modification of RT28U for rail mounting. It is equipped with a 3-digit LED display, a universal input for Pt100, Pt1000, PTC, 6 thermocouple types as well as for linear current, voltage, and resistive signals from external transmitters and can have up to 2 programmable relay control/alarm outputs. The device has a built-in circuit for self-testing and self-calibration, manual measurement offset setting, and automatic software compensation of line resistance and cold junction temperature. The display-to-input correspondence (in case of linear input), decimal point position, temperature measurement unit, and offset value are also programmable. Thanks to its universal input, serial interface, and excellent price-to-performance ratio, RT28U-R is a widely applicable device.

Technical specifications Input Pt100 (w=1.385); 3-wire Pt1000 (w=1.385); 3-wire PTC (1k at 25 °C); 3-wire PTC (2k at 25 °C); 3-wire Thermocouple "T" Thermocouple "J" Thermocouple "K" Thermocouple "S" Thermocouple "R" Thermocouple "B" Linear voltage 0...10 V Linear current 0(4)...20 mA Linear resistive 0...1 kΩ Custom linear (option) (1) Two-wire external transmitter Manual input offset Input type selection Decimal point selection Temperature measurement unit

Outputs Relay electromechanical Solid state relay MOS gate Output for external SSR Control algorithm Set point Alarms Serial interface (4)

(programmable) -100...850 °C -100...600 °C -50...150 °C -50...150 °C -40...400 °C -20...999 °C -20...999 °C 0...999 °C 0...999 °C 100...999 °C -199...999, programmable -199...999, programmable -199...999, programmable -199...999, programmable 4...20 mA (2) programmable programmable programmable °C or °F, programmable (up to 2 relay outputs) 5A/250V w/ NO/NC or NO (3) contact 1A/250VAC 0.1A/60V, optically isolated 5…24 V, 30 mA ON/OFF within input range limits programmable RS485, isolated

Accuracy 0.3% (5) from span 0.02% from span for 1 °C automatic, -10...80 °C automatic, up to 2 х 25 Ω

Measurement error Temperature drift Cold junction compensation RTD line compensation

Power supply Mains supply voltage Isolated low voltage Non-isolated low voltage External mains transformer (6) Consumption

230 VAC or 115 VAC 12…24 V or 24 VAC 12…24 V 9(12) VAC max. 1.5 VA

Indication and controls 3 LED indicators 2 LEDs for output state 3 membrane keys

Digital display LEDs Keyboard

Operating conditions -10...65 °C 0...85 %RH

Ambient temperature Ambient humidity

Design and materials Dimensions [mm] Mounting Display digit height [mm] Maximum weight [g] Protection, front/terminals Case material Wiring

'R1'

'R2'

70x110x58 on rail 14 300 IP20 plastic screw terminals

35x78x91 in socket or on rail 10 200 IP44 / IP20 plastic socket UNDECAL (6)

(1)

Instead of linear current Provides loop supply voltage - 24 VDC (only w/ isolated power supply). NO/NC for case 'R1'; NO for case 'R2' (4) Not available for case 'R2'. (5) 0.5% for T/Cs "S", "R", and "B" (6) Ordered separately (see 'Accessories') (2)

Ordering code

RT28U - G0.G1.G5G5.G9'9" - #1

Code Feature or option

Code values

Case

R1 - for rail mounting, R2 - 11-pin box

Power supply

A - 230 VAC, B - 115 VAC, E - 9(12) VAC w/ external transformer (6), P - 12…24 V, non-isolated, Q - 12…24 V, isolated, R - 24 VAC

Relay output

X - none, A - relay NO (3), C - relay NO/NC (3), D - SSR, J - for external SSR, M - isolated MOS gate (4)