HTM BALL VALVES by Naeem Aziz

NIVE R

SA RY

27th

SINCE 1984

CERTIFICATE

ISO 9001 AD-2000 3A APPROVED PED/Module H CERTIFICATE EN10204 3.1 MATERIAL CERT. CRN REGISTERED API 607 FIRE SAFE APPROVED ATEX II 2GD CERTIFICATE TA-Luft CERTIFICATE & ISO 15848 DNV CERTIFICATE BV MARINE CERTIFICATE REACH & RoHS CERTIFICATE

CERTIFICATE API 607 Fire Safe Approved Ball Valves 2006WB

2019D

2007W36

2020D

2007W60

2020N

2021D

2013KM

Fire Safe Design AfterAfter the Fire a Fire

Before a Fire Fire Beforethe

Ball Seat

Fire Safe Lip Secondary metal to metal seal acts as backup if primary seal is destroyed by fire.

TA-Luft Fugitive Emission Approved Ball Valves 2006 2006S 2006SW 2006W 2009M 2019S 2020S

2011N 2012N 2013N 2011NM 2012NM 2013NM

2009D 2006SD 2011D 2012D

2013D 2011ND 2012ND 2013ND

ISO 15848 Fugitive Emission Approved Ball Valves 2012LD 2011KMD 2012KMD 2013KMD

2019D 2020D

Comparison table of the current standards ISO 15848-1 Test fluid

He or CH4

Leakage method

global measure

Class Valve type stroke Number of cycles

He global measure

A: 10 ·mg·s ·m -4 -1 -1 B: 10 ·mg·s ·m -2 -1 -1 C: 10 ·mg·s ·m 100% for on-off ±10% for control -6

TA-Luft VDI 2440

-1

20k, 60k, 100k

-1

-4

-1

-5

-1

10 ·mbar·l·s ·m (1.76·10 ·mg·s ·m ) not specified not specified

Valves Product Flow Diagram. INSPECTION YES Wax Injection Repair Wax Pattern

ON SEVERAL TIMES E L C CY E R

Clustering

Drying

Sanding

Dipping

Dewaxing

Alloy Smelting

Material Analysis

Firing

Casting

Cooling by Air

CLE WAX RECY

Wax Recycle System

Valves Product Flow Diagram. Knock Out

Cutting

Shot Blasting

INSPECTION

Repair

YES

Repair Welding

Shot Blasting

Assembling

Oil Free

Grinding

Pickling

Machining

YES

Pressure Test

Repair

Package

Delivery

VALVE ACCESSORIES STEM EXTENSION A valve stem extension extends the length of a valve stem for bringing the operating device close to the surface, eliminating the need for heavy, long Valve struggling to find the operating device. Especially if you have a deep burying.

TYPE A FEATURES - Rugged and stable - Investment casting - Stainless steel fabrication - Good airtightness - Mount upon ISO-5211 direct mounting pad F04~F12 - Could be fitted with locking device and actuator

TYPE B FEATURES - Less cost - Bar stock - Stainless steel fabrication - Easy to fitted with any valves - Optional extension stem state length - Require no maintenance

VALVE ACCESSORIES S P R IN G R E T U R N H A N D L E (D E A D M A N H A N D L E ) The spring return handles also known as “dead mans” handles, the function in this case is always that the valve is (spring)return to closed position when the handle will be released.

FEATURES - Size : 1/2"~2" (DN15~DN50) This handle is designed to mount upon the ISO 5211 direct mounting pad and only suitable for HAITIMA valves 2011KM / 2012KM / 2013KM 2013KB / 2013KC

Maximum output torque: * DN15-DN20: 5 N.M (44.25lb-in) * DN25-DN32: 11 N.M (97.36lb-in) * DN40-DN50: 17 N.M (150.46lb-in)

VALVE ACCESSORIES V-PORT BALL HAITIMA V-Port Ball are ideal for achieving more precise control than traditional round ported ball valves with the simplicity and sealing features. The standard "V" notch options are 30˚, 60˚ & 90˚. The 30˚ option allows for 30˚ V-Port finer tapered control throughout the valve rotation and the 60˚ & 90˚ offers a larger Cv in addition to controlled flow.

30° V-PORT - Cv Table 150 140 130 120 110

Cv (USgal/min)

100 4"

3" 2-1/2"

2" 70

1-1/2" 1-1/4"

1" 3/4"

1/2"

40 30 20 10 0 0

OPENING DEGREE

30˚ V-Port Ball Cv Curve for Example SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

0 0 0 0 0 0 0 0 0 0

10 0.00 0.00 0.00 0.00 0.00 0.29 0.32 0.39 1.44

20 0.00 0.11 0.28 0.12 0.48 1.40 1.62 1.36 6.22

30 0.25 0.39 0.89 0.66 1.42 3.31 5.21 5.03 16.45

OPENING DEGREE 40 50 0.63 0.99 0.79 1.51 1.77 3.05 1.61 3.08 2.93 5.70 6.35 11.07 10.95 18.56 11.71 20.00 28.54 43.84

60 1.61 2.47 4.88 5.43 9.30 16.60 28.96 32.74 59.64

70 2.24 3.59 6.93 8.20 12.96 24.15 40.16 47.44 84.28

80 90 3.09 3.56 5.00 5.83 8.50 10.10 10.80 14.29 16.00 18.59 32.08 39.09 50.77 59.66 63.34 80.31 117.90 148.09 unit:USgal/min

Index ITEM

PAGE

1-PC. SCREWED END BALL VALVE

2017K

1-PC. SCREWED END BALL VALVE

2017

1-PC. SCREWED END BALL VALVE

2017P

1-PC. SCREWED END BALL VALVE

2017BM

1-PC. SCREWED END BALL VALVE

2017C

2-PC. SCREWED END BALL VALVE

2006

2-PC. SCREWED END BALL VALVE

2006WB

2-PC. SCREWED END BALL VALVE

2007A

2-PC. SCREWED END BALL VALVE

2009

2-PC. SCREWED END BALL VALVE

2009M

2-PC. SCREWED END BALL VALVE

2009D

2-PC. SCREWED END BALL VALVE

2006S

2-PC. SCREWED END BALL VALVE

2006SW

2-PC. SCREWED END BALL VALVE

2006SD

3-PC. SOCKET WELD END BALL VALVE

2011

3-PC. BUTT WELD END BALL VALVE

2012

3-PC. SCREWED END BALL VALVE

2013

3-PC. SOCKET WELD END BALL VALVE

2011M

3-PC. BUTT WELD END BALL VALVE

2012M

3-PC. SCREWED END BALL VALVE

2013M

3-PC. SOCKET WELD END BALL VALVE

2011D

3-PC. BUTT WELD END BALL VALVE

2012D

Index ITEM

PAGE

3-PC. SCREWED END BALL VALVE

2013D

3-PC. BUTT WELD END BALL VALVE

2012L

3-PC. SCREWED END BALL VALVE

2013KM

3-PC. SOCKET WELD END BALL VALVE

2011N

3-PC. BUTT WELD END BALL VALVE

2012N

3-PC. SCREWED END BALL VALVE

2013N

3-PC. SOCKET WELD END BALL VALVE

2011NM

3-PC. BUTT WELD END BALL VALVE

2012NM

3-PC. SCREWED END BALL VALVE

2013NM

3-PC. SOCKET WELD END BALL VALVE

2011ND

3-PC. BUTT WELD END BALL VALVE

2012ND

3-PC. SCREWED END BALL VALVE

2013ND

39 40

HIGH PURITY BALL VALVE HIGH PURITY BALL VALVE

2013KB

HIGH PURITY BALL VALVE

2013KC

CLEAN BALL VALVE

2012CM

CLEAN BALL VALVE

2013CM

CLEAN BALL VALVE

2013CD

CLEAN BALL VALVE

2057C

HIGH PRESSURE BALL VALVE

2007W21

HIGH PRESSURE BALL VALVE

2007W36

HIGH PRESSURE BALL VALVE

2007W60

Index ITEM

PAGE

1-PC. SCREWED END BALL VALVE

2017K

1-PC. SCREWED END BALL VALVE

2017

1-PC. SCREWED END BALL VALVE

2017P

1-PC. SCREWED END BALL VALVE

2017BM

1-PC. SCREWED END BALL VALVE

2017C

2-PC. SCREWED END BALL VALVE

2006

2-PC. SCREWED END BALL VALVE

2006WB

2-PC. SCREWED END BALL VALVE

2007A

2-PC. SCREWED END BALL VALVE

2009

2-PC. SCREWED END BALL VALVE

2009M

2-PC. SCREWED END BALL VALVE

2009D

2-PC. SCREWED END BALL VALVE

2006S

2-PC. SCREWED END BALL VALVE

2006SW

2-PC. SCREWED END BALL VALVE

2006SD

3-PC. SOCKET WELD END BALL VALVE

2011

3-PC. BUTT WELD END BALL VALVE

2012

3-PC. SCREWED END BALL VALVE

2013

3-PC. SOCKET WELD END BALL VALVE

2011M

3-PC. BUTT WELD END BALL VALVE

2012M

3-PC. SCREWED END BALL VALVE

2013M

3-PC. SOCKET WELD END BALL VALVE

2011D

3-PC. BUTT WELD END BALL VALVE

2012D

Index ITEM

PAGE

SCREWED END GATE VALVE

2029

SCREWED END SWING CHECK VALVE

2030

FLANGED END GLOBE VALVE

2053

FLANGED END GATE VALVE

2054

FLANGED END SWING CHECK VALVE

2024

DUAL PLATE CHECK VALVE

2025

DISC CHECK VALVE

2026 2026C

FLANGED END CHECK VALVE

2027F

SCREWED END PISTON CHECK VALVE

2050

SCREWED END Y-STRAINER

2049

FLANGED END Y-STRAINER

2049F

FLANGED END BASKET STRAINER

2049B

NEEDLE VALVE

2032

BUTTERFLY VALVE

2014W

BUTTERFLY VALVE

2014L

FLANGED END SIGHT GLASS

2055

SCREWED END SIGHT GLASS

2056

BLIND FLANGE VALVE

2080

PRESSURE / TEMPERATURE RATING VALVE SEAT MATERIAL SELECTION GUIDE SPECIAL APPLICATION STANDARDS SPECIAL MATERIALS INTRODUCTION

1-PC. SCREWED END BALL VALVE

2017K

FEATURES - Reduced port, 1/4"~3" (DN8~DN80) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - Thread type : ASTM B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A351-CF8 RETAINER ASTM A351-CF8M BALL SEAT A PTFE / RTFE SEAT B AISI 316 AISI 304 STEM THRUST WASHER PTFE PACKING GLAND RING SPRING WASHER AISI 304 STEM NUT HANDLE PVC HANDLE SLEEVE AISI 304 LOCKING DEVICE

DN 8 10 15 20 25 32 40 50 65 80

d 5 7 9.2 12.5 15 20 25 32 38 50

L 39 44 55 59 69 77 81 97 127 153

W 71 91 95 95 113 113 141 141 190 190

H 33 35 40 44 50 57 64 68 85 90

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.2 0.28 0.36 0.49 0.59 0.79 0.98 1.26 1.5 1.97

L 1.54 1.73 2.17 2.32 2.72 3.03 3.19 3.82 5 6.02

W 2.8 3.58 3.74 3.74 4.45 4.45 5.55 5.55 7.48 7.48

H 1.3 1.38 1.57 1.73 1.97 2.24 2.52 2.68 3.35 3.54

unit:mm

2017

1-PC. SCREWED END BALL VALVE

FEATURES - Reduced port, 1/4”~2” (DN8~DN50) - W.P. : 1000 WOG (PN63) - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 RETAINER ASTM A351-CF8M 3 BALL PTFE / RTFE 4 SEAT PTFE SEAL 5 ASTM A276-316 STEM 6 FLAT WASHER 7 AISI 304 8 SPRING WASHER STEM NUT 9 10 THRUST WASHER PTFE PACKING 11 AISI 304 HANDLE 12 PVC 13 HANDLE SLEEVE

DN 8 10 15 20 25 32 40 50

d 5 7 9 1 2 .5 15 20 25 32

L 39 44 5 6 .5 59 71 78 83 100

H 3 5 .5 3 7 .1 4 2 .4 4 5 .9 4 8 .5 54 6 5 .5 7 1 .5

H1 17 2 1 .4 2 6 .1 2 8 .8 3 6 .5 4 0 .5 4 6 .5 51

T 3 4 5 5 6 6 8 8

N PS 1/4" 3/8" 1/2" 3/4" 1" 1 -1 / 4 " 1 -1 / 2 " 2"

d 0 .2 0 .2 8 0 .3 5 0 .4 9 0 .5 9 0 .7 9 0 .9 8 1 .2 6

L 1 .5 4 1 .7 3 2 .2 2 2 .3 2 2 .8 3 .0 7 3 .2 7 3 .9 4

H 1 .4 1 .4 6 1 .6 7 1 .8 1 1 .9 1 2 .1 3 2 .5 8 2 .8 1

H1 0 .6 7 0 .8 4 1 .0 3 1 .1 3 1 .4 4 1 .5 9 1 .8 3 2 .0 1

T 0 .1 2 0 .1 6 0 .2 0 .2 0 .2 4 0 .2 4 0 .3 1 0 .3 1

W 6 2 .7 7 2 .9 8 8 .2 8 8 .2 106 106 153 153 unit:mm W 2 .4 7 2 .8 7 3 .4 7 3 .4 7 4 .1 7 4 .1 7 6 .0 2 6 .0 2 unit:in

2017P

1-PC. SCREWED END BALL VALVE

FEATURES - Reduced port, 1/4”~2” (DN8~DN50) - W.P. : 1000 WOG (PN63) - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Polished body - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 SO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

PARTS BODY RETAINER BALL SEAT SEAL STEM FLAT WASHER SPRING WASHER STEM NUT THRUST WASHER PACKING HANDLE HANDLE SLEEVE

DN 8 10 15 20 25 32 40 50

d 5 7 9 12.5 15 20 25 32

L 39 44 56.5 59 71 78 83 100

H 35.5 37.1 42.4 45.9 48.5 54 65.5 71.5

H1 17 21.4 26.1 28.8 36.5 40.5 46.5 51

T 3 4 5 5 6 6 8 8

N PS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d 0.2 0.28 0.35 0.49 0.59 0.79 0.98 1.26

L 1.54 1.73 2.22 2.32 2.8 3.07 3.27 3.94

H 1.4 1.46 1.67 1.81 1.91 2.13 2.58 2.81

H1 0.67 0.84 1.03 1.13 1.44 1.59 1.83 2.01

T 0.12 0.16 0.2 0.2 0.24 0.24 0.31 0.31

MATERIAL ASTM A351-CF8M PTFE / RTFE PTFE ASTM A276-316 AISI 304 PTFE AISI 304 PVC

W 62.7 72.9 88.2 88.2 106 106 153 153 unit:mm W 2.47 2.87 3.47 3.47 4.17 4.17 6.02 6.02 unit:in

1-PC. SCREWED END BALL VALVE

2017BM

FEATURES -- Reduced port, 1/2”~2” (DN15~DN50) - W.P. : 2000 WOG (PN150) - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - Tapped & drilled mounting pad (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 RETAINER ASTM A351-CF8M 3 BALL RTFE / PTFE 4 SEAT PTFE 5 THRUST WASHER ASTM A276-316 STEM 6 PTFE PACKING 7 GLAND RING 8 AISI 304 NUT 9 HANDLE 10 PVC 11 HANDLE SLEEVE AISI 304 12 SPRING WASHER

DN 8 10 15 20 25 32 40 50

d 9 9 9 12.5 15 20 25 32

L 58.5 58.5 66 70 80 95 101 114

H 45.8 45.8 57.9 60.9 63.8 70.3 72.3 78.3

W 110 110 105 105 113 113 160 160

N PS 1/4" 3/8" 1/2" 3/4" 1" 1-1 /4" 1-1 /2" 2"

d 0.35 0.35 0.35 0.49 0.59 0.79 0.98 1.26

L 2.3 2.3 2.6 2.76 3.15 3.74 3.98 4.49

H 1.8 1.8 2.28 2.4 2.51 2.77 2.85 3.08

W 4.33 4.33 4.13 4.13 4.45 4.45 6.3 6.3

A 28.5 28.5 28.5 28.2 35.6 35.6 35.6 35.6 unit:mm A 1.12 1.12 1.12 1.11 1.4 1.4 1.4 1.4 unit:in

2017C

1-PC. SCREWED END BALL VALVE

FEATURES - Reduced port, 1/4”~2” (DN8~DN50) - W.P. : 2000 WOG (PN150) - W.T. : -20°C~200°C (-4°F~392°F) - Forged body - Blow-out proof stem - Anti-static device (option) - NACE MR0175 - ASME B16.34 Wall thickness - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

PARTS BODY RETAINER BALL SEAT SEAL STEM GLAND RING PACKING THRUST WASHER SPRING WASHER NUT HANDLE HANDLE SLEEVE

DN 8 10 15 20 25 32 40 50

d 5 7 9 12.5 15 20 25 32

L 43.2 47.2 62.5 69.9 85.9 93.7 1 0 1 .6 1 1 4 .3

H 27.5 25.5 51.9 59.8 67 75.5 78.5 81.5

F 21 25 30 36 46 55 61 75

N PS 1/4'' 3/8'' 1/2'' 3/4'' 1'' 1-1/4'' 1-1/2'' 2''

d 0.2 0.28 0.35 0.49 0.59 0.79 0.98 1.26

L 1.7 1.86 2.46 2.75 3.38 3.69 4 4.5

H 1.08 1 2.04 2.35 2.64 2.97 3.09 3.21

F 0.83 0.98 1.18 1.42 1.81 2.17 2.4 2.95

MATERIAL ASTM A105 ASTM A351-CF8 CTFE / RTFE AISI 304 CTFE / RTFE AISI 304 AISI 201 PVC

W 60 79 118 118 120 146 146 152

unit:mm W 2.36 3.11 4.65 4.65 4.72 5.75 5.75 5.98 unit:in

2-PC. SCREWED END BALL VALVE

2006

FEATURES - Full port - W.P. : 1/4"~1" - 2000 WOG(PN150) 1-1/4"~2" - 1500 WOG(PN100) 2-1/2"~4" - 1000 WOG(PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - Tapped & drilled mounting pad (option) - TA-Luft approved (option) - Length conform to DIN 3202/4-M3 - 2006M3 (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14

PARTS MATERIAL BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND NUT AISI 304 SEAT PTFE / RTFE SEAL PTFE PACKING PTFE / RTFE THRUST WASHER PTFE SPRING WASHER NUT AISI 304 HANDLE HANDLE SLEEVE PVC LOCKING DEVICE AISI 304

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 13 15 20 25 32 38 50 65 80 100

L 60.5 60.5 64 77 90 100 118 138 166.5 193 260

H 50 50 50 62 75.5 81 98 108 136 147 183

W 102 102 102 120 159 159 188 188 245 245 320

B 14 14 14 22 22 24 24 24 35 35 50

C 5 5 5 6.5 8 8 9 9 12 12 16

H1 32.5 32.5 32.5 40.5 50 49 60 62 79 78.5 99

H2 12.5 12.5 12.5 16 18 17 19 20 31 31 53

H3 10.5 10.5 10.5 13.5 15.5 15.5 17.5 17.5 30.5 30.5 42

T 5/16"W 5/16"W 5/16"W 3/8"W 7/16"W 7/16"W 1/2"W 1/2"W 3/4"W 3/4"W 1"W

Torque (N-m) 4.1 4.1 4.4 5.9 7.4 8.8 13.2 16.2 44.1 46.6 -

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.51 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

L 2.38 2.38 2.52 3.03 3.54 3.94 4.65 5.43 6.56 7.6 10.24

H 1.97 1.97 1.97 2.44 2.97 3.19 3.86 4.25 5.35 5.79 7.2

W 4.02 4.02 4.02 4.72 6.26 6.26 7.4 7.4 9.65 9.65 12.6

B 0.55 0.55 0.55 0.87 0.87 0.94 0.94 0.94 1.38 1.38 1.97

C 0.2 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

H1 1.28 1.28 1.28 1.59 1.97 1.93 2.36 2.44 3.11 3.09 3.9

H2 0.49 0.49 0.49 0.63 0.71 0.67 0.75 0.79 1.22 1.22 2.09

H3 0.41 0.41 0.41 0.53 0.61 0.61 0.69 0.69 1.2 1.2 1.65

T 5/16"W 5/16"W 5/16"W 3/8"W 7/16"W 7/16"W 1/2"W 1/2"W 3/4"W 3/4"W 1"W

Torque (in-lb) 36 36 39 52 65.1 78.1 116.8 143.4 390.3 412.4 -

Weight (kg) 0.3 0.3 0.3 0.6 0.8 1.3 2 3.1 6 10.1 unit:mm Weight (lb) 0.6 0.6 0.7 1.2 1.9 2.8 4.4 6.9 13.2 22.3 unit:in

2-PC. SCREWED END BALL VALVE

2006WB

FEATURES - Full port - W.P. : 1/4"~1" - 2000 WOG(PN150) 1-1/4"~2" - 1500 WOG(PN100) 2-1/2"~4" - 1000 WOG(PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - Tapped & drilled mounting pad - API 607 Fire safe approved - ASME B16.34 Wall thickness - NACE MR0175 - Seal welded ends - TA-Luft approved (option) - Economic pattern - 2006W - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND NUT AISI 304 SEAT PTFE / RTFE PACKING GRAPHITE THRUST WASHER CTFE SPRING WASHER NUT AISI 304 HANDLE HANDLE SLEEVE PVC LOCKING DEVICE AISI 304

- ABOVE MENTIONED MATERIALS APPLY TO FIRE SAFE DESIGN - TA-LUFT DESIGN SHOULD REPLACE WITH PTFE PACKING

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 12.8 15 20.2 25.6 32 38 50.8 65.5 80 100

L 60.5 60.5 62.5 77 90 100 118 138 167 193 258

W 102 102 102 124 165 165 188 188 250 250 324

H 53.6 53.6 57 62.1 80 83.7 99 107 142 153 180

H1 10.5 10.5 10.5 13.5 15.7 15.7 17 17 27.5 27.5 34

B 5/16" 5/16" 5/16" 3/8" 7/16" 7/16" 1/2" 1/2" 3/4" 3/4" 1"

T 5 5 5 6.5 8 8 9 9 12 12 16

Torque (N-m) 5.1 6.4 6.4 6.4 11.4 28.6 32.5 44.2 55 70 90

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.5 0.59 0.8 1.01 1.26 1.5 2 2.58 3.15 3.94

L 2.38 2.38 2.46 3.03 3.54 3.94 4.65 5.43 6.57 7.6 10.16

W 4.02 4.02 4.02 4.88 6.5 6.5 7.4 7.4 9.84 9.84 12.76

H 2.11 2.11 2.24 2.44 3.15 3.3 3.9 4.21 5.59 6.02 7.09

H1 0.41 0.41 0.41 0.53 0.62 0.62 0.67 0.67 1.08 1.08 1.34

B 5/16" 5/16" 5/16" 3/8" 7/16" 7/16" 1/2" 1/2" 3/4" 3/4" 1"

T 0.2 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

Torque (in-lb) 45.1 56.6 56.6 56.6 100.9 253.1 287.6 391.2 486.8 619.5 796.6

Weight (kg) 0.4 0.4 0.4 0.7 1.3 2 2.5 4.1 6.4 10.9 21 unit:mm Weight (lb) 0.9 0.9 0.9 1.5 2.9 4.4 5.5 9 14.1 24 46.3 unit:in

2007A

2-PC. SCREWED END BALL VALVE

FEATURES - Standard port - W.P. : 1/4"~1" - 2000 WOG (PN150) 1-1/4"~2" - 1500 WOG (PN100) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - Tapped & drilled mounting pad (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP ASTM A351-CF8M 3 BALL RTFE 4 SEAT 5 SEAL PTFE 6 THRUST WASHER ASTM A276-316 7 STEM PTFE 8 PACKING 9 GLAND NUT 10 HANDLE AISI 304 11 SPRING WASHER 12 NUT PVC 13 HANDLE SLEEVE

DN 8 10 15 20 25 32 40 50

d 11.1 12.7 12.7 17.5 22.3 25.4 31.8 38.1

L 56.8 56.8 59.7 79.6 85 103 111 137

W 113 113 113 124.5 124.5 141.5 141.5 183

H 52.3 52.3 52.3 59.8 62.5 85.4 90.2 94.8

H1 42 42 42 52.8 55.5 73.7 78.5 85.6

H2 17.8 17.8 17.8 22.8 22.8 30.8 31.3 29.1

H3 12 12 12 14.5 14.5 20.6 20.6 20.6

S1 17.7 17.7 17.7

S 35.4 35.4 35.4

M M6 M6 M6

T 5.5 5.5 5.5 6.3 6.3 9.5 9.5 9.5

Torque (N-M) 3.6 3.6 3.6 6.8 11 17.4 22.7 39.5

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d 0.44 0.5 0.5 0.69 0.88 1 1.25 1.5

L 2.24 2.24 2.35 3.13 3.35 4.06 4.37 5.39

W 4.45 4.45 4.45 4.9 4.9 5.57 5.57 7.2

H 2.06 2.06 2.06 2.35 2.46 3.36 3.55 3.73

H1 1.65 1.65 1.65 2.08 2.19 2.9 3.09 3.37

H2 0.7 0.7 0.7 0.9 0.9 1.21 1.23 1.15

H3 0.47 0.47 0.47 0.57 0.57 0.81 0.81 0.81

S1 0.7 0.7 0.7

S 1.39 1.39 1.39

M M6 M6 M6

T 0.22 0.22 0.22 0.25 0.25 0.37 0.37 0.37

Torque (in-lb) 31.9 31.9 31.9 60.2 97.4 154 200.9 349.6

Weight (kg) 0.4 0.4 0.4 0.6 0.8 1.5 1.9 2.7 unit:mm Weight (lb) 0.8 0.8 0.8 1.4 1.7 3.3 4.2 6 unit:in

2-PC. SCREWED END BALL VALVE

2009

FEATURES - Full port, 1/4"~3" (DN8~DN80) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226

ITEM PARTS MATERIAL 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL ASTM A351-CF8M 4 STEM ASTM A276-316 5 GLAND NUT AISI 304 6 SEAT PTFE / RTFE 7 SEAL 8 PACKING PTFE 9 THRUST WASHER 10 SPRING WASHER 11 NUT AISI 304 12 HANDLE 13 HANDLE SLEEVE PVC

DN 8 10 15 20 25 32 40 50 65 80

d 12 13 15 20 25 32 38 50 65 80

L 51.5 51.5 60.5 70.5 83.5 97 107 135 159.5 185.5

H 49 49 49 62.5 75 81.5 99 108 136.5 145.5

W 102 102 102 120 158 158 188 188 245 245

C 5 5 5 6 8 8 9 9 12 12

T 5/16"W 5/16"W 5/16"W 3/8"W 7/16"W 7/16"W 1/2"W 1/2"W 3/4"W 3/4"W

Torque (N-m) 4.1 4.1 4.9 7.4 11.4 17.9 21.2 26 48.6 156

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.47 0.51 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15

L 2.03 2.03 2.38 2.78 3.29 3.82 4.21 5.31 6.28 7.3

H 1.93 1.93 1.93 2.46 2.95 3.21 3.9 4.25 5.37 5.73

W 4.02 4.02 4.02 4.72 6.22 6.22 7.4 7.4 9.65 9.65

C 0.2 0.2 0.2 0.24 0.31 0.31 0.35 0.35 0.47 0.47

T 5/16"W 5/16"W 5/16"W 3/8"W 7/16"W 7/16"W 1/2"W 1/2"W 3/4"W 3/4"W

Torque (in-lb) 36 36 43 65 101 158 187 230 430 1380

Weight (kg) 0.2 0.2 0.3 0.5 0.9 1.3 2.2 3.5 6.2 10.3 unit:mm Weight (lb) 0.5 0.5 0.7 1.1 2 2.9 4.9 7.7 13.7 22.6 unit:in

2-PC. SCREWED END BALL VALVE

2009M

FEATURES - Full port, 1/4"~3" (DN8~DN80) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - IOS 5211 Mounting pad - TA-Luft approved - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PARTS BODY CAP BALL SEAL SEAT THRUST WASHER PACKING STEM GLAND RING STOP BOLT SPRING WASHER NUT HANDLE HANDLE SLEEVE

MATERIAL ASTM A351-CF8M PTFE PTFE / RTFE PTFE ASTM A276-316

DN 8 10 15 20 25 32 40 50 65 80

d 11.5 12.7 15 20 25 32 38 50 65 80

L 50.5 50.5 60 70 82 95 108 135 158 185

H 51 51 53 60 78 83 94 102 139 150

W 102 102 102 127 160 160 200 200 270 270

D 36 36 36 36 42 42 50 50 70 70

M M5*0.8 M5*0.8 M5*0.8 M5*0.8 M5*0.8 M5*0.8 M6*1.0 M6*1.0 M8*1.25 M8*1.25

Torque (N-m) 5.2 5.2 6.5 6.5 7.5 10.4 15 20 60 80

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.45 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15

L 1.99 1.99 2.36 2.76 3.23 3.74 4.25 5.31 6.22 7.28

H 2.01 2.01 2.09 2.36 3.07 3.27 3.7 4.02 5.47 5.91

W 4.02 4.02 4.02 5 6.3 6.3 7.87 7.87 10.63 10.63

D 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76

M M5*0.8 M5*0.8 M5*0.8 M5*0.8 M5*0.8 M5*0.8 M6*1.0 M6*1.0 M8*1.25 M8*1.25

Torque (in-lb) 46 46 57.5 57.5 66.4 92.1 132.8 177 531 708.1

AISI 304

PVC

Weight (kg) 0.3 0.3 0.3 0.5 0.9 1.3 1.9 3.3 6.1 9.7 unit:mm Weight (lb) 0.6 0.6 0.7 1.1 2 2.9 4.2 7.2 13.4 21.4 unit:in

2-PC. SCREWED END BALL VALVE

2009D

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP ASTM A351-CF8M BALL ASTM A276-316 STEM RTFE / PTFE SEAT SEAL PTFE THRUST WASHER PACKING VITON O-RING AISI 304 HANDLE AISI 301 BELLEVILLE WASHER STEM NUT LOCKING DEVICE AISI 304 GLAND RING LOCKING WASHER PVC HANDLE SLEEVE

DN 8 10 15 20 25 32 40 50

d 8 10 15 20 25 32 38 50

L 75 75 75 80 90.5 110 120 140

H 64 64 64 70 74 80 98 107

ISO 5211 F03/F04 F03/F04 F03/F04 F03/F04 F04/F05 F04/F05 F05/F07 F05/F07

S 9 9 9 9 11 11 14 14

h1 8 8 8 8 9 12 13 13.5

h2 39 39 39 44 47.5 53 64.5 73

d2 31 31 31 31 35.5 35.5 56 56

d3 36 36 36 36 42 42 50 50

d4 42 42 42 42 50 50 70 70

R1 2.75 2.75 2.75 2.75 2.75 2.75 3.5 3.5

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d 0.31 0.39 0.59 0.79 0.98 1.26 1.5 1.97

L 2.95 2.95 2.95 3.15 3.56 4.33 4.72 5.51

H 2.52 2.52 2.52 2.76 2.91 3.15 3.86 4.21

ISO 5211 F03/F04 F03/F04 F03/F04 F03/F04 F04/F05 F04/F05 F05/F07 F05/F07

S 0.35 0.35 0.35 0.35 0.43 0.43 0.55 0.55

h1 0.31 0.31 0.31 0.31 0.35 0.47 0.51 0.53

h2 1.54 1.54 1.54 1.73 1.87 2.09 2.54 2.87

d2 1.22 1.22 1.22 1.22 1.4 1.4 2.2 2.2

d3 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97

d4 1.65 1.65 1.65 1.65 1.97 1.97 2.76 2.76

R1 0.11 0.11 0.11 0.11 0.11 0.11 0.14 0.14

R2 Torque (N-m) Weight (kg) 0.5 3.6 2.75 0.5 3.6 2.75 0.5 3.6 2.75 0.6 6.5 2.75 1 9.5 3.5 1.5 11 3.5 2.3 13 4.5 3.6 52 4.5 unit:mm R2 Torque (in-lb) Weight (lb) 1.1 31.9 0.11 1.1 31.9 0.11 1.1 31.9 0.11 1.3 57.5 0.11 2.2 84.1 0.14 3.3 97.4 0.14 5.1 115.1 0.18 7.9 460.3 0.18 unit:in

2-PC. SCREWED END BALL VALVE

2006S

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~3" (DN8~DN80) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - Tapped & drilled mounting pad (option) - TA-Luft approved (option) - Length conform to DIN 3202/4-M32006SM3 (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14

PARTS MATERIAL BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND AISI 304 SEAT PTFE / RTFE SEAL PACKING PTFE THRUST WASHER SPRING WASHER NUT AISI 304 HANDLE HANDLE SLEEVE PVC LOCKING DEVICE AISI 304

DN 8 10 15 20 25 32 40 50 65 80

d 11.6 12.5 15 20 25 32 38 50 63 76

D 19 22.5 26 32 38 48 54.8 67 85 100

L 50.8 50.8 58 65.6 78.7 90 105 124 146 164

H 58.5 58.5 58.5 63.5 78 83 102 108 138 146

H1 18 18 18.5 22.5 25 26 30 30 40 40

T 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNF 3/4"-10UNF

W 100 100 100 125 149 149 190 190 250 250

Torque (N-m) 3.5 4 5.5 7.5 11 15 20 40 60 85

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.46 0.49 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99

D 0.75 0.89 1.02 1.26 1.5 1.89 2.16 2.64 3.35 3.94

L 2 2 2.28 2.58 3.1 3.54 4.13 4.88 5.75 6.46

H 2.3 2.3 2.3 2.5 3.07 3.27 4.02 4.25 5.43 5.75

H1 0.71 0.71 0.73 0.89 0.98 1.02 1.18 1.18 1.57 1.57

T 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNF 3/4"-10UNF

W 3.94 3.94 3.94 4.92 5.87 5.87 7.48 7.48 9.84 9.84

Torque (in-lb) 31 35.4 48.7 66.4 97.4 132.8 177 354 531 752.3

Weight (kg) 0.2 0.2 0.3 0.5 0.8 1.1 1.8 2.7 5.6 7.5 unit:mm Weight (lb) 0.5 0.5 0.7 1 1.7 2.5 3.9 5.9 12.4 16.5 unit:in

2-PC. SCREWED END BALL VALVE

2006SW

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~3" (DN8~DN80) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - Seal welded ends - TA-Luft approved (option) - Length conform to DIN 3202/4-M32006SWM3 (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

PARTS BODY CAP BALL SEAT THRUST WASHER PACKING STEM GLAND RING SPRING WASHER STEM NUT HANDLE LOCKING DEVICE HANDLE SLEEVE

DN 8 10 15 20 25 32 40 50 65 80

d 11.5 12.5 15 20 25 32 38 50 63 76

L 50 50 58 66 75.5 88.5 98.5 120 146.5 165

H 48 48 51 57 63 74 81 94 130 137

W 102 102 102 129 129 153 153 190 247 247

C 5 5 5 6.5 6.5 8 8 9 12 12

T 5/16"-18UNC 5/16"-18UNC 5/16"-18UNC 3/8"-16UNC 3/8"-16UNC 7/16"-14UNC 7/16"-14UNC 1/2"-12UNC 3/4"-10UNC 3/4"-10UNC

Weight (kg) 0.2 0.2 0.2 0.3 0.5 0.9 1.1 1.8 3.5 5

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.45 0.49 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99

L 1.97 1.97 2.28 2.6 2.97 3.48 3.88 4.72 5.77 6.5

H 1.89 1.89 2.01 2.24 2.48 2.91 3.19 3.7 5.12 5.39

W 4.02 4.02 4.02 5.08 5.08 6.02 6.02 7.48 9.72 9.72

C 0.2 0.2 0.2 0.26 0.26 0.31 0.31 0.35 0.47 0.47

T 5/16"-18UNC 5/16"-18UNC 5/16"-18UNC 3/8"-16UNC 3/8"-16UNC 7/16"-14UNC 7/16"-14UNC 1/2"-12UNC 3/4"-10UNC 3/4"-10UNC

Weight (lb) 0.4 0.4 0.5 0.7 1.1 2 2.4 4 7.8 10.9

MATERIAL ASTM A351-CF8M PTFE / RTFE PTFE ASTM A276-316

AISI 304

PVC

Torque (N-m) 3.7 4.2 4.5 9 12 18.5 27 35 42 50 unit:mm Torque (in-lb) 32.7 37.2 39.8 79.7 106.2 163.7 239 309.8 371.7 442.5 unit:in

2-PC. SCREWED END BALL VALVE

2006SD

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~3" (DN8~DN80) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 Direct mounting pad - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M SEAL PTFE SEAT PTFE / RTFE THRUST WASHER PTFE PACKING O-RING VITON STEM ASTM A276-316 GLAND RING AISI 304 BELLEVILLE WASHER AISI 301 LOCKING WASHER STOPPER AISI 304 STEM NUT HANDLE HANDLE SLEEVE PVC BOLT AISI 304 NUT

DN 8 10 15 20 25 32 40 50 65 80

d 11.6 12.7 15 20 25 32 38 50 63 76

L 58 58 58 65.6 78.7 90 105 124 146.2 163.7

H 62 62 62 65 76 81.5 103 111.5 141 150

W 113.5 113.5 113.5 113.5 140 140 172 172 325 325

S 9 9 9 9 11 11 14 14 17 17

h1 8 8 8 9 11 11 11.5 11.5 20.5 20.5

h2 36.4 36.4 36.4 39.2 48.7 54.2 65.7 75.5 91.5 100.75

d1 31 31 31 31 35.5 35.5 56 56 76 76

d2 36 36 36 36 42 42 50 50 70 70

d3 42 42 42 42 50 50 70 70 102 102

Ra 2.75 2.75 2.75 2.75 2.75 2.75 3.5 3.5 4.5 4.5

Rb 2.75 2.75 2.75 2.75 3.5 3.5 4.5 4.5 5.5 5.5

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.46 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99

L 2.28 2.28 2.28 2.58 3.1 3.54 4.13 4.88 5.76 6.44

H 2.44 2.44 2.44 2.56 2.99 3.21 4.1 4.39 5.55 5.91

W 4.47 4.47 4.47 4.47 5.51 5.51 6.77 6.77 12.8 12.8

S 0.35 0.35 0.35 0.35 0.43 0.43 0.55 0.55 0.67 0.67

h1 0.31 0.31 0.31 0.35 0.43 0.43 0.45 0.45 0.81 0.81

h2 1.43 1.43 1.43 1.54 1.92 2.13 2.59 2.97 3.6 3.97

d1 1.22 1.22 1.22 1.22 1.4 1.4 2.2 2.2 2.99 2.99

d2 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76

d3 1.65 1.65 1.65 1.65 1.97 1.97 2.76 2.76 4.02 4.02

Ra 0.11 0.11 0.11 0.11 0.11 0.11 0.14 0.14 0.18 0.18

Rb 0.11 0.11 0.11 0.11 0.14 0.14 0.18 0.18 0.22 0.22

Torque (N-m) 5.5 5.5 5.5 7.5 11 15 20 40 60 85 unit:mm Torque (in-lb) 48.7 48.7 48.7 66.4 97.4 132.8 177 354 531 752.3 unit:in

2011

3-PC. SOCKET WELD END BALL VALVE

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND NUT AISI 304 SEAT RTFE / PTFE / CTFE SEAL PACKING PTFE THRUST WASHER SPRING WASHER STEM NUT BOLT NUT AISI 304 SPRING WASHER HANDLE LOCKING DEVICE HANDLE SLEEVE PVC

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 12.7 15 20 25 32 38 50 65 80 100

D 14 18 22 27.6 34.5 43 49.2 61.5 74 90 115

L 64.5 64.5 66 83.5 95 111.2 130 151 183 210.4 234

H 56 56 57 66 76 81 98 106 138 154 178

W 102 102 102 120.5 158.5 158.5 188 188 245 290 320

S 35.5 35.5 38 43 54 65 75 88 114 132 158

T 21.5 21.5 24 28 35 45 55 66 86 100 125

N 5 5 5 6.5 8 8 9 9 12 12 16

P 9.5 9.5 10.5 13.5 15.5 15.5 17.5 17.5 33 33 42

K 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

D 0.55 0.71 0.87 1.09 1.36 1.69 1.94 2.42 2.91 3.54 4.53

L 2.54 2.54 2.6 3.29 3.74 4.38 5.12 5.94 7.2 8.28 9.21

H 2.2 2.2 2.24 2.6 2.99 3.19 3.86 4.17 5.43 6.06 7.01

W 4.02 4.02 4.02 4.74 6.24 6.24 7.4 7.4 9.65 11.42 12.6

S 1.4 1.4 1.5 1.69 2.13 2.56 2.95 3.46 4.49 5.2 6.22

T 0.85 0.85 0.94 1.1 1.38 1.77 2.17 2.6 3.39 3.94 4.92

N 0.2 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

P 0.37 0.37 0.41 0.53 0.61 0.61 0.69 0.69 1.3 1.3 1.65

K 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

Weight (kg) 0.4 0.4 0.5 0.7 1.1 1.7 2.4 3.6 8.9 14.9 23.4 unit:mm Weight (lb) 0.9 0.9 1.1 1.5 2.4 3.7 5.3 7.9 19.6 32.8 51.6 unit:in

2012

3-PC. BUTT WELD END BALL VALVE

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DN 8 10 15 20 25 32 40 50 65 80 100

d 8 12.7 15 20 25 32 38 50 65 80 100

D 13.5 17.5 22 27 34 42.5 48.5 61 77 90 115

d1 12.7 12.7 15 20 25 32 38 50 65 80 100

L 64.5 64.5 66 82 95 111.2 130.6 151 185 212 235

H 56 56 57 66 76 81 98 106 138 154 178

W 102 102 102 120.5 158.5 158.5 188 188 245 290 320

S 35.5 35.5 38 43 54 65 75 88 114 132 158

T 21.5 21.5 24 28 35 45 55 66 86 100 125

N 5 5 5 6.5 8 8 9 9 12 12 16

P 9.5 9.5 10.5 13.5 15.5 15.5 17.5 17.5 33 33 42

K 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.31 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

D 0.53 0.69 0.87 1.06 1.34 1.67 1.91 2.4 3.03 3.54 4.53

d1 0.5 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

L 2.54 2.54 2.6 3.23 3.74 4.38 5.14 5.94 7.28 8.35 9.25

H 2.2 2.2 2.24 2.6 2.99 3.19 3.86 4.17 5.43 6.06 7.01

W 4.02 4.02 4.02 4.74 6.24 6.24 7.4 7.4 9.65 11.42 12.6

S 1.4 1.4 1.5 1.69 2.13 2.56 2.95 3.46 4.49 5.2 6.22

T 0.85 0.85 0.94 1.1 1.38 1.77 2.17 2.6 3.39 3.94 4.92

N 0.2 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

P 0.37 0.37 0.41 0.53 0.61 0.61 0.69 0.69 1.3 1.3 1.65

K 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

Weight (kg) 0.4 0.4 0.5 0.7 1.1 1.7 2.4 3.6 8.9 14.9 23.4 unit:mm Weight (lb) 0.9 0.9 1.1 1.5 2.4 3.7 5.3 7.9 19.6 32.8 51.6 unit:in

2013

3-PC. SCREWED END BALL VALVE

FEATURES - Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 12.7 15 20 25 32 38 50 65 80 100

L 64.5 64.5 66 83.4 95 111.2 130 151 184 209 234.4

H 56 56 57 66 76 81 98 106 138 154 178

W 102 102 102 120.5 158.5 158.5 188 188 245 290 320

S 35.5 35.5 38 43 54 65 75 88 114 132 158

T 21.5 21.5 24 28 35 45 55 66 86 100 125

N 5 5 5 6.5 8 8 9 9 12 12 16

P 9.5 9.5 10.5 13.5 15.5 15.5 17.5 17.5 33 33 42

K 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

L 2.54 2.54 2.6 3.28 3.74 4.38 5.12 5.94 7.24 8.23 9.23

H 2.2 2.2 2.24 2.6 2.99 3.19 3.86 4.17 5.43 6.06 7.01

W 4.02 4.02 4.02 4.74 6.24 6.24 7.4 7.4 9.65 11.42 12.6

S 1.4 1.4 1.5 1.69 2.13 2.56 2.95 3.46 4.49 5.2 6.22

T 0.85 0.85 0.94 1.1 1.38 1.77 2.17 2.6 3.39 3.94 4.92

N 0.2 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

P 0.37 0.37 0.41 0.53 0.61 0.61 0.69 0.69 1.3 1.3 1.65

K 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

Weight (kg) 0.4 0.4 0.5 0.7 1.1 1.7 2.4 3.6 8.9 14.3 23.4 unit:mm Weight (lb) 0.9 0.9 1.1 1.5 2.4 3.7 5.3 7.9 19.6 31.5 51.6 unit:in

3-PC. SOCKET WELD END BALL VALVE

2011M

FEATURES - Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - ISO 5211 direct Mounting pad - 2411D (option) - Socket weld ends conform to ANSI B16.11 & DIN 3239 part2 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND NUT AISI 304 SEAT RTFE / PTFE SEAL PACKING PTFE THRUST WASHER SPRING WASHER STEM NUT BOLT AISI 304 NUT SPRING WASHER HANDLE HANDLE SLEEVE PVC LOCKING DEVICE AISI 304

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 12.7 15 20 25 32 38 50 65 80 100

D 14 18 22 27.6 34.5 43 49.2 61.5 74 90 115

L 64.5 64.5 66 83.5 95 111.2 130 151 183 210.4 234

H 56 56 57 63 81 87 96 109 133 149 171

W 119 119 119 135.5 158.5 158.5 188 198 280 320 312

P 36 36 36 36 42 50 50 70 102 102 102

P1 68.5 68 69

M M5 M5 M5 M5 M5 M5 M6 M8 M12 M12 M12

M1 M10 M10 M10

T 5 5 5 6.5 8 8 9 9 12 12 16

H1 11 11 11 14 15.5 15.5 18 18 31 31 40

H2 15 15 15 19.5 23.5 20 26 26 40 38 53

S 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

Torque (N-M) 4 4 4 7 7.5 11 17 45 59 90 160

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

D 0.55 0.71 0.87 1.09 1.36 1.69 1.94 2.42 2.91 3.54 4.53

L 2.54 2.54 2.6 3.29 3.74 4.38 5.12 5.94 7.2 8.28 9.21

H 2.2 2.2 2.24 2.48 3.19 3.43 3.78 4.29 5.24 5.87 6.73

W 4.69 4.69 4.69 5.33 6.24 6.24 7.4 7.8 11.02 12.6 12.28

P 1.42 1.42 1.42 1.42 1.65 1.97 1.97 2.76 4.02 4.02 4.02

P1 2.7 2.68 2.72

M M5 M5 M5 M5 M5 M5 M6 M8 M12 M12 M12

N M10 M10 M10

T 0.2 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

H1 0.43 0.43 0.43 0.55 0.61 0.61 0.71 0.71 1.22 1.22 1.57

H2 0.59 0.59 0.59 0.77 0.93 0.79 1.02 1.02 1.57 1.5 2.09

S 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

Torque (in-lb) 35.4 35.4 35.4 62 66.4 97.4 150.5 398.3 522.2 796.6 1416.1

Weight (kg) 0.4 0.4 0.6 0.8 1.1 1.9 2.6 3.9 8.1 13.4 24.6 unit:mm Weight (lb) 0.9 0.9 1.3 1.7 2.4 4.1 5.7 8.7 17.8 29.4 54.1 unit:in

2012M

3-PC. BUTT WELD END BALL VALVE

FEATURES - Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - ISO 5211 direct Mounting pad - 2412D (option) - Butt weld ends conform to ANSI B16.25 & DIN 3239 part1 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DN 8 10 15 20 25 32 40 50 65 80 100

d 8 12.7 15 20 25 32 38 50 65 80 100

D 13.5 17.5 22 27 34 42.5 48.5 61 77 90 115

L 64.5 64.5 66 82 95 111.2 130.6 151 185 212 235

W 119 119 119 135.5 158.5 158.5 188 198 280 320 312

H 56 56 57 63 81 87 96 109 133 149 171

H1 11 11 11 14 15.5 15.5 18 18 31 31 40

H2 15 15 15 19.5 23.5 20 26 26 40 38 53

P 36 36 36 36 42 50 50 70 102 102 102

P1 68.5 68 69

M M5 M5 M5 M5 M5 M5 M6 M8 M 12 M 12 M 12

M1 M10 M10 M10

T 5 5 5 6.5 8 8 9 9 12 12 16

S 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.31 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

D 0.53 0.69 0.87 1.06 1.34 1.67 1.91 2.4 3.03 3.54 4.53

L 2.54 2.54 2.6 3.23 3.74 4.38 5.14 5.94 7.28 8.35 9.25

W 4.69 4.69 4.69 5.33 6.24 6.24 7.4 7.8 11.02 12.6 12.28

H 2.2 2.2 2.24 2.48 3.19 3.43 3.78 4.29 5.24 5.87 6.73

H1 0.43 0.43 0.43 0.55 0.61 0.61 0.71 0.71 1.22 1.22 1.57

H2 0.59 0.59 0.59 0.77 0.93 0.79 1.02 1.02 1.57 1.5 2.09

P 1.42 1.42 1.42 1.42 1.65 1.97 1.97 2.76 4.02 4.02 4.02

P1 2.7 2.68 2.72

M M5 M5 M5 M5 M5 M5 M6 M8 M 12 M 12 M 12

M1 M10 M10 M10

T 0.2 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

S 5/16"UNC 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"UNC 1/2"UNC 3/4"UNC 3/4"UNC 1"UNC

Torque (N-m) 4 4 4 7 7.5 11 17 45 59 90 160 unit:mm Torque (in-lb) 35.4 35.4 35.4 62 66.4 97.4 150.5 398.3 522.2 796.6 1416.1 unit:in

3-PC. SCREWED END BALL VALVE

2013M

FEATURES - Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - ISO 5211 direct Mounting pad - 2413D (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND NUT AISI 304 SEAT PTFE / RTFE / CTFE SEAL PACKING PTFE THRUST WASHER SPRING WASHER STEM NUT BOLT NUT AISI 304 SPRING WASHER HANDLE LOCKING DEVICE HANDLE SLEEVE PVC

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 12.7 15 20 25 32 38 50 65 80 100

L 64.5 64.5 66 83.4 95 111.2 130 151 184 209 234.4

W 119 119 119 135.5 158.5 158.5 188 198 280 320 312

H 56 56 57 63 81 87 96 109 133 149 171

H1 11 11 11 14 15.5 15.5 18 18 31 31 40

H2 15 15 15 19.5 23.5 20 26 26 40 38 53

P 36 36 36 36 42 50 50 70 102 102 102

P1 68.5 68 69

M M5 M5 M5 M5 M5 M5 M6 M8 M 12 M 12 M 12

M1 M10 M10 M10

T 5 5 5 6.5 8 8 9 9 12 12 16

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

L 2.54 2.54 2.6 3.28 3.74 4.38 5.12 5.94 7.24 8.23 9.23

W 4.69 4.69 4.69 5.33 6.24 6.24 7.4 7.8 11.02 12.6 12.28

H 2.2 2.2 2.24 2.48 3.19 3.43 3.78 4.29 5.24 5.87 6.73

H1 0.43 0.43 0.43 0.55 0.61 0.61 0.71 0.71 1.22 1.22 1.57

H2 0.59 0.59 0.59 0.77 0.93 0.79 1.02 1.02 1.57 1.5 2.09

P 1.42 1.42 1.42 1.42 1.65 1.97 1.97 2.76 4.02 4.02 4.02

P1 2.7 2.68 2.72

M M5 M5 M5 M5 M5 M5 M6 M8 M 12 M 12 M 12

M1 M10 M10 M10

T 0.2 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

S Torque (N-M) Weight (kg) 5/16"UNC 0.5 4 5/16"UNC 0.4 4 5/16"UNC 0.5 4 3/8"UNC 0.8 7 7/16"UNC 1.1 7.5 7/16"UNC 1.8 11 1/2"UNC 2.5 17 1/2"UNC 3.8 45 3/4"UNC 8.8 59 3/4"UNC 14.3 90 1"UNC 23.5 160 unit:mm S Torque (in-lb) Weight (lb) 5/16"UNC 1.1 35.4 5/16"UNC 0.9 35.4 5/16"UNC 1.1 35.4 3/8"UNC 1.8 62 7/16"UNC 2.4 66.4 7/16"UNC 4 97.4 1/2"UNC 5.5 150.5 1/2"UNC 8.4 398.3 3/4"UNC 19.4 522.2 3/4"UNC 31.5 796.6 1"UNC 51.8 1416.1 unit:in

3-PC. SOCKET WELD END BALL VALVE

2011D

FEATURES - Full port, 1/4"~2" (DN8~DN50) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 Direct mounting pad - Length conform to DIN 3202/4-M3 - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Socket weld ends conform to ANSI B16.11 & DIN 3239 part2 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL ASTM A351-CF8M 4 STEM ASTM A276-316 5 SEAT RTFE 6 SEAL 7 THRUST WASHER PTFE 8 PACKING 9 O-RING VITON 10 BELLEVILLE WASHER AISI 304 11 HANDLE ASTM A351-CF8 12 STEM NUT 13 LOCKING PAD 14 GLAND RING 15 LOCKING WASHER AISI 304 16 BOLT 17 NUT 18 SPRING WASHER 19 HANDLE SLEEVE PVC

DN 8 10 15 20 25 32 40 50

d 8 10 15 20 25 32 38 50

L 55 60 75 80 90 110 120 140

W ISO 5211 120 F03/F04 120 F03/F04 120 F03/F04 120 F03/F04 148 F04/F05 148 F04/F05 178 F05/F07 178 F05/F07

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d 0.31 0.39 0.59 0.79 0.98 1.26 1.5 1.97

L 2.17 2.36 2.95 3.15 3.54 4.33 4.72 5.51

W 4.72 4.72 4.72 4.72 5.83 5.83 7.01 7.01

ISO 5211 F03/F04 F03/F04 F03/F04 F03/F04 F04/F05 F04/F05 F05/F07 F05/F07

A 42 42 42 42 50 50 70 70

B 6.5 6.5 6.5 6.5 7.5 7.5 9 9

S 9 9 9 9 11 11 14 14

h1 8 8 8 9 10 11 12 12

h2 40.3 40.3 40.3 45 47.5 55.5 65.3 73

d2 31 31 31 31 35.5 35.5 56 56

d3 36 36 36 36 42 42 50 50

d4 42 42 42 42 50 50 70 70

R1 2.75 2.75 2.75 2.75 2.75 2.75 3.5 3.5

A 1.65 1.65 1.65 1.65 1.97 1.97 2.76 2.76

B 0.26 0.26 0.26 0.26 0.3 0.3 0.35 0.35

S 0.35 0.35 0.35 0.35 0.43 0.43 0.55 0.55

h1 0.31 0.31 0.31 0.35 0.39 0.43 0.47 0.47

h2 1.59 1.59 1.59 1.77 1.87 2.19 2.57 2.87

d2 1.22 1.22 1.22 1.22 1.4 1.4 2.2 2.2

d3 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97

d4 1.65 1.65 1.65 1.65 1.97 1.97 2.76 2.76

R1 0.11 0.11 0.11 0.11 0.11 0.11 0.14 0.14

R2 Torque (N-M) 2.75 3.6 2.75 3.6 2.75 3.6 2.75 6.1 3.5 9.9 3.5 15.6 4.5 22 4.5 26.8 unit:mm R2 Torque (in-lb) 0.11 31.9 0.11 31.9 0.11 31.9 0.11 54 0.14 87.6 0.14 138.1 0.18 194.7 0.18 237.2 unit:in

2011D

3-PC. SOCKET WELD END BALL VALVE

FEATURES - Full port, 2-1/2"~4" (DN65~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 Direct mounting pad - Length conform to DIN 3202/4-M3 - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Socket weld ends conform to ANSI B16.11 & DIN 3239 part2 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL ASTM A351-CF8M 4 RETAINER 5 STEM ASTM A276-316 6 SEAT RTFE 7 SEAL 8 THRUST WASHER PTFE 9 PACKING 10 O-RING VITON 11 BELLEVILLE WASHER AISI 301 12 HANDLE ASTM A351-CF8M 13 LOCKING PAD 14 GLAND RING 15 LOCKING WASHER 16 BOLT AISI 304 17 NUT 18 SPRING WASHER 19 STEM NUT

ISO 5211

Torque (N-M)

185

325

F07/F10

100

105

102

4.5

5.5

89.2

205

325

F07/F10

100

111.5

102

4.5

5.5

100

100 115.5 240

325

F10/F12

125

136

100

102

125

5.5

6.5

116 unit:mm

NPS

2-1/2" 2.56

ISO 5211

Torque (in-lb)

2.91

7.28

12.8

F07/F10

3.94

0.39

0.67

4.13

2.76

4.02

0.18

0.22

789.5

2.99

3.54

8.07

12.8

F07/F10

3.94

0.39

0.67

4.39

2.76

4.02

0.18

0.22

858.5

3.94

4.55

9.45

12.8

F10/F12

4.92

0.47

0.87

5.35

3.94

4.02

0.22

0.26

1026.7 unit:in

2012D

3-PC. BUTT WELD END BALL VALVE

FEATURES - Full port, 2-1/2"~4" (DN65~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 Direct mounting pad - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Butt weld ends conform to ANSI B16.25 & DIN 3239 part1 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL ASTM A351-CF8M 4 RETAINER 5 STEM ASTM A276-316 6 SEAT RTFE 7 SEAL 8 THRUST WASHER PTFE 9 PACKING 10 O-RING VITON 11 BELLEVILLE WASHER AISI 301 12 HANDLE ASTM A351-CF8M 13 LOCKING PAD 14 GLAND RING 15 LOCKING WASHER 16 BOLT AISI 304 17 NUT 18 SPRING WASHER 19 STEM NUT

ISO 5211

Torque (N-M)

170

325

F07/F10

100

105

102

4.5

5.5

89.2

180

325

F07/F10

100

111.5

102

4.5

5.5

100

115

189

325

F10/F12

125

136

100

102

125

5.5

6.5

116 unit:mm

ISO 5211

Torque (in-lb)

2-1/2" 2.56

2.91

6.69

12.8

F07/F10

3.94

0.39

0.67

4.13

2.76

4.02

0.18

0.22

789.5

2.99

3.54

7.09

12.8

F07/F10

3.94

0.39

0.67

4.39

2.76

4.02

0.18

0.22

858.5

3.94

4.53

7.44

12.8

F10/F12

4.92

0.47

0.87

5.35

3.94

4.02

0.22

0.26

1026.7

NPS

unit:in

2013D

3-PC. SCREWED END BALL VALVE

FEATURES - Full port, 1/4"~2" (DN8~DN50) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 Direct mounting pad - Length conform to DIN 3202/4-M3 - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL ASTM A351-CF8M 4 STEM ASTM A276-316 5 SEAT RTFE 6 SEAL 7 THRUST WASHER PTFE 8 PACKING 9 O-RING VITON 10 BELLEVILLE WASHER AISI 301 11 HANDLE ASTM A351-CF8 12 STEM NUT 13 LOCKING PAD 14 GLAND NUT 15 LOCKING WASHER AISI 304 16 BOLT 17 NUT 18 SPRING WASHER 19 HANDLE SLEEVE PVC

DN 8 10 15 20 25 32 40 50

d 8 10 15 20 25 32 38 50

L 55 60 75 80 90 110 120 140

W ISO 5211 120 F03/F04 120 F03/F04 120 F03/F04 120 F03/F04 148 F04/F05 148 F04/F05 178 F05/F07 178 F05/F07

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d 0.31 0.39 0.59 0.79 0.98 1.26 1.5 1.97

L 2.17 2.36 2.95 3.15 3.54 4.33 4.72 5.51

W 4.72 4.72 4.72 4.72 5.83 5.83 7.01 7.01

ISO 5211 F03/F04 F03/F04 F03/F04 F03/F04 F04/F05 F04/F05 F05/F07 F05/F07

A 42 42 42 42 50 50 70 70

B 6.5 6.5 6.5 6.5 7.5 7.5 9 9

S 9 9 9 9 11 11 14 14

h1 8 8 8 9 10 11 12 12

h2 40.3 40.3 40.3 45 47.5 55.5 65.3 73

d2 31 31 31 31 35.5 35.5 56 56

d3 36 36 36 36 42 42 50 50

d4 42 42 42 42 50 50 70 70

R1 2.75 2.75 2.75 2.75 2.75 2.75 3.5 3.5

A 1.65 1.65 1.65 1.65 1.97 1.97 2.76 2.76

B 0.26 0.26 0.26 0.26 0.3 0.3 0.35 0.35

S 0.35 0.35 0.35 0.35 0.43 0.43 0.55 0.55

h1 0.31 0.31 0.31 0.35 0.39 0.43 0.47 0.47

h2 1.59 1.59 1.59 1.77 1.87 2.19 2.57 2.87

d2 1.22 1.22 1.22 1.22 1.4 1.4 2.2 2.2

d3 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97

d4 1.65 1.65 1.65 1.65 1.97 1.97 2.76 2.76

R1 0.11 0.11 0.11 0.11 0.11 0.11 0.14 0.14

R2 Torque (N-M) 2.75 3.6 2.75 3.6 2.75 3.6 2.75 6.1 3.5 9.9 3.5 15.6 4.5 22 4.5 26.8 unit:mm R2 Torque (in-lb) 0.11 31.9 0.11 31.9 0.11 31.9 0.11 54 0.14 87.6 0.14 138.1 0.18 194.7 0.18 237.2 unit:in

2013D

3-PC. SCREWED END BALL VALVE

FEATURES - Full port, 2-1/2"~4" (DN65~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 Direct mounting pad - Length conform to DIN 3202/4-M3 - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL ASTM A351-CF8M 4 RETAINER 5 STEM ASTM A276-316 6 SEAT RTFE 7 SEAL 8 THRUST WASHER PTFE 9 PACKING 10 O-RING VITON 11 BELLEVILLE WASHER AISI 301 12 HANDLE ASTM A351-CF8M 13 LOCKING PAD 14 GLAND RING 15 LOCKING WASHER 16 BOLT AISI 304 17 NUT 18 SPRING WASHER 19 STEM NUT

ISO 5211

Torque (N-M)

185

325

F07/F10

100

105

102

4.5

5.5

89.2

205

325

F07/F10

100

111.5

102

4.5

5.5

100

240

325

F10/F12

125

136

100

102

125

5.5

6.5

116 unit:mm

NPS

2-1/2" 2.56

ISO 5211

Torque (in-lb)

7.28

12.8

F07/F10

3.94

0.39

0.67

4.13

2.76

4.02

0.18

0.22

789.5

2.99

8.07

12.8

F07/F10

3.94

0.39

0.67

4.39

2.76

4.02

0.18

0.22

858.5

3.94

9.45

12.8

F10/F12

4.92

0.47

0.87

5.35

3.94

4.02

0.22

0.26

1026.7 unit:in

3-PC. EXTEND BUTT WELD END BALL VALVE

2012L

FEATURES - Full port, 3/8"~4" (DN10~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - 2012LM (option) - ISO 5211 Direct mounting pad - 2012LD (option) - Butt weld ends conform to ANSI B16.25 & DIN 3239 part1 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A351-CF3 CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND NUT AISI 304 SEAT PTFE / RTFE SEAL PACKING PTFE THRUST WASHER SPRING WASHER STEM NUT BOLT AISI 304 NUT SPRING WASHER HANDLE HANDLE SLEEVE PVC LOCKING DEVICE AISI 304

DN 10 15 20 25 32 40 50 65 80 100

d 12.7 15 20 25 32 38 50 65 76 100

d1 14 17.3 22.5 28.3 37.2 43.1 53.3 69 82 106

D 17.2 21.3 26.5 33.5 42.4 48.3 60.3 76 90 115

L 225 225 225 245 255 260 275 334 354 365

H 54 57 66 76 81 98 106 138 154 178

W 102 102 120.5 158.5 158.5 188 188 245 245 320

T 21.5 24 28 35 45 55 66 86 100 125

N 5 5 6.5 8 8 9 9 12 12 16

V 29.7 30.1 36.5 40.6 41.8 48.5 49.4 72.1 65.6 78.2

P 10.5 10.5 13.5 15.5 15.5 17.5 17.5 33 33 39

K 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"W 1/2"W 3/4"UNC 3/4"UNC 1"UNC

NPS 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.5 0.59 0.79 0.98 1.26 1.5 1.97 2.56 2.99 3.94

d1 0.55 0.68 0.89 1.11 1.46 1.7 2.1 2.72 3.23 4.17

D 0.68 0.84 1.04 1.32 1.67 1.9 2.37 2.99 3.54 4.53

L 8.86 8.86 8.86 9.65 10.04 10.24 10.83 13.15 13.94 14.37

H 2.13 2.24 2.6 2.99 3.19 3.86 4.17 5.43 6.06 7.01

W 4.02 4.02 4.74 6.24 6.24 7.4 7.4 9.65 9.65 12.6

T 0.85 0.94 1.1 1.38 1.77 2.17 2.6 3.39 3.94 4.92

N 0.2 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.63

V 1.17 1.19 1.44 1.6 1.65 1.91 1.94 2.84 2.58 3.08

P 0.41 0.41 0.53 0.61 0.61 0.69 0.69 1.3 1.3 1.54

K 5/16"UNC 5/16"UNC 3/8"UNC 7/16"UNC 7/16"UNC 1/2"W 1/2"W 3/4"UNC 3/4"UNC 1"UNC

Torque (N-M) 2.5 4.3 4.6 7.4 11.4 12.2 32.3 46.7 92 unit:mm Torque (in-lb) 22.1 38.1 40.7 65.5 100.9 108 285.9 413.3 814.3 unit:in

3-PC. SCREWED END BALL VALVE

2013KM

TESTED AND CERTIFIED FIRE SAFE TO API 607 4TH EDITION Size range : 1/4"~1" : 2000 WOG 1-1/4"~2" : 1500 WOG 2-1/2"~4" : 1000 WOG End Connection : 2011KM - Socket Weld End 2012KM - Butt Weld End 2013KM - Screwed End Valve Materials : 316 Stainless Steel Carbon Steel

Ball & Stem Material : 316 Stainless Steel Service Applications : Hydraulic Chemical Steam Oil / Gas Oxygen Food Processing Vacuum Dry / Liquid Chlorine Thermal Fluids

NACE MR0175

- ISO 5211 Direct mounting pad (option) - 2013KMD ISO 15848 fugitive emission approved (option)

- Spring return handle (option)

Seat Materials : Teflon (PTFE) Relnforced Teflon (RTFE) TFE+25% Carbon DELRIN PEEK TFM1600

3-PC. SCREWED END BALL VALVE

DN 8 10 15 20

D 8 10 15 20

E 13.5 17.5 23.3 28.7

F 25 25 30.3 36

G 14 18 22 27.5

L 65.7 65.7 74.8 80.2

H 57 57 57 59.7

H1 12.1 12.1 12.1 14.5

H2 9.8 9.8 9.8 10.6

W 113.5 113.5 113.5 113.5

T 5.7 5.7 5.7 5.7

NPS 1/4" 3/8" 1/2" 3/4"

D 0.31 0.39 0.59 0.79

E 0.53 0.69 0.92 1.13

F 0.98 0.98 1.19 1.42

G 0.55 0.71 0.87 1.08

L 2.59 2.59 2.94 3.16

H 2.24 2.24 2.24 2.35

H1 0.48 0.48 0.48 0.57

H2 0.39 0.39 0.39 0.42

W 4.47 4.47 4.47 4.47

T 0.22 0.22 0.22 0.22

DN 25 32 40 50

D 24 30 38 50

E 34.8 42.6 50 63.7

F 44.8 54 62 76

H L G 34.5 93 81.5 43 110.6 85.9 49 122.6 96.7 61.2 140 104.9

H1 15.5 15.5 27.3 28.1

H2 14 15 18.7 19

W 146 146 180 180

T 7.5 7.5 8.6 8.6

NPS 1" 1-1/4" 1-1/2" 2"

D 0.94 1.18 1.5 1.97

E 1.37 1.68 1.97 2.51

F 1.76 2.13 2.44 2.99

G 1.36 1.69 1.93 2.41

H 3.21 3.38 3.81 4.13

H1 0.61 0.61 1.07 1.11

H2 0.55 0.59 0.74 0.75

W 5.75 5.75 7.09 7.09

T 0.3 0.3 0.34 0.34

L 3.66 4.35 4.83 5.51

2013KM

ISO 5211 F03 F03 F03 F03

M M5*0.8 M5*0.8 M5*0.8 M5*0.8

A ISO 5211 F03 1.42 F03 1.42 F03 1.42 F03 1.42

M M5*0.8 M5*0.8 M5*0.8 M5*0.8

ISO 5211 F04 F04 F05 F05

M M5*0.8 M5*0.8 M6*1.0 M6*1.0

A ISO 5211 F04 1.65 F04 1.65 F05 1.97 F05 1.97

M M5*0.8 M5*0.8 M6*1.0 M6*1.0

A 36 36 36 36

A 42 42 50 50

Torque (N-M) S 3.8 3/8"-24UNF 3.8 3/8"-24UNF 3.8 3/8"-24UNF 5.1 3/8"-24UNF unit:mm Torque (in-lb) S 33.8 3/8"-24UNF 33.8 3/8"-24UNF 33.8 3/8"-24UNF 45.1 3/8"-24UNF unit:in

Torque (N-M) S 10.2 7/16"-20UNF 15.9 7/16"-20UNF 21 9/16"-18UNF 32.1 9/16"-18UNF unit:mm Torque (in-lb) S 90.2 7/16"-20UNF 141 7/16"-20UNF 186 9/16"-18UNF 284.1 9/16"-18UNF unit:in

3-PC. SCREWED END BALL VALVE

2013KM PERFORMANCE DATA APPROXIMATE VALVE SIZE FLOW COEFF. CV 1/2" 5 3/4" 21 1" 44 1-1/4" 64 1-1/2" 87 2" 210 2-1/2" 277 3" 482 4" 1001 unit:US gal/min

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 RETAINER ASTM A351-CF8M 4 BALL 5 STEM ASTM A276-316 6 SEAT PTFE / RTFE / CTFE / TFM 1600 7 SEAL GRAPHITE 8 THRUST WASHER CTFE 9 PACKING GRAPHITE 10 GLAND RING AISI 304 11 BELLEVILLE WASHER AISI 301 12 LOCKING WASHER ASTM A167-304 13 STEM NUT ASTM A194-8A 14 WRENCH BLOCK 15 LOCKING PAD 16 HEX HESD BOLT AISI 304 17 STOP PIN 18 HANDLE 19 BOLT ASTM A193-B8A 20 NUT ASTM A194-8A 21 HANDLE SLEEVE PVC

DN 65 80 100

d 64 75 96

I J K L H H1 H2 W C A B 74 74 92 184.6 133.9 42.5 15 222.5 70 32 64 90 90 104 204 172.1 46.4 17.5 344 102 44.5 80.6 118 115.5 136 240 185.5 47 17.5 344 102 44.5 80.6

NPS d I J K L H H1 2-1/2" 2.52 2.91 2.91 3.62 7.27 5.27 1.67 3" 2.95 3.54 3.54 4.09 8.03 6.78 1.83 4" 3.78 4.65 4.55 5.35 9.45 7.3 1.85

E 70 96 96

D T U ISO 5211 Torque (N-M) M F07 53.5 85 M8*1.25 14 M20*2.5 111.5 102 M10*1.5 19 1"-14UNF F10 114 102 M10*1.5 19 1"-14UNF F10 unit:mm H2 W C A B E D T U ISO 5211 Torque (N-M) M 0.59 8.76 2.76 1.26 2.52 2.76 3.35 M8*1.25 0.55 M20*2.5 F07 473.6 0.69 13.54 4.02 1.75 3.17 3.78 4.02 M10*1.5 0.75 1"-14UNF F10 986.9 0.69 13.54 4.02 1.75 3.17 3.78 4.02 M10*1.5 0.75 1"-14UNF F10 1009 unit:in

3-PC. SOCKET WELD END BALL VALVE

2011N

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 W OG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - TA-Luft approved (option) - Length conform to DIN 3202/4-M32011N-M3 (option) - Socket weld ends conform to ANSI B16.11 & DIN 3239 part2 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 SEAT SEAL PTFE PACKING THRUST WASHER GLAND NUT SPRING WASHER STEM NUT BOLT AISI 304 NUT SPRING WASHER HANDLE LOCKING DEVICE HANDLE SLEEVE PVC

DN 8 10 15 20 25 32 40 50 65 80 100

d1 11.6 12.5 15 20 25 32 38 50 63 76 96

d2 14.5 18 22 27.5 34 43 49 61 74 90 115.5

B 10 10 10 13 13 13 13 16 16 16 20

L 65 65 65 75 85 101 112 130 162 188 224

H 58.5 58.5 62 62 77 82 100 108 137 145 179

W 100 100 100 125 149 149 190 190 250 250 323

C 5 5 5 6.5 7.9 7.9 10 10 12 12 16

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

Torque (N-M) 3.5 4 5.5 7.5 11 15 20 40 60 85 150

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d1 0.46 0.49 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

d2 0.57 0.71 0.87 1.08 1.34 1.69 1.93 2.4 2.91 3.54 4.55

B 0.39 0.39 0.39 0.51 0.51 0.51 0.51 0.63 0.63 0.63 0.79

L 2.56 2.56 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.3 2.3 2.44 2.44 3.03 3.23 3.94 4.25 5.39 5.71 7.05

W 3.94 3.94 3.94 4.92 5.87 5.87 7.48 7.48 9.84 9.84 12.72

C 0.2 0.2 0.2 0.26 0.31 0.31 0.39 0.39 0.47 0.47 0.63

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

Torque (in-lb) 31 35.4 48.7 66.4 97.4 132.8 177 354 531 752.3 1327.6

Weight (kg) 0.4 0.4 0.5 0.7 1 1.6 2.5 3.5 6.7 9.5 19.1 unit:mm Weight (lb) 0.8 0.8 1.1 1.5 2.2 3.5 5.5 7.7 14.8 20.9 42.1 unit:in

3-PC. BUTT WELD END BALL VALVE

2012N

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - TA-Luft approved (option) - Length conform to DIN 3202/4-M32012N-M3 (option) - Butt weld ends conform to ANSI B16.25 & DIN 3239 part1 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 SEAT PTFE / RTFE SEAL PACKING PTFE THRUST WASHER GLAND NUT SPRING WASHER STEM NUT BOLT AISI 304 NUT SPRING WASHER HANDLE LOCKING DEVICE HANDLE SLEEVE PVC

DN 8 10 15 20 25 32 40 50 65 80 100

d1 9.3 12.5 15 20 25 32 38 50 63 76 96

d2 15.8 20.9 26.6 35.1 40.9 52.5 62.7 77.9 102

d3 14.7 18.1 22.3 27.7 34.4 43.2 49.3 61.5 74.5 91 115.5

L 65 65 65 75 85 101 112 130 162 188 224

H 58.5 58.5 62 62 77 82 100 108 137 145 179

H1 18 18 18.5 22.5 25 26 30 30 40 40 54

W 100 100 100 125 149 149 190 190 250 250 323

C 5 5 5 6.5 7.9 7.9 10 10 12 12 16

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

Torque (N-M) 3.5 4 5.5 7.5 11 15 20 40 60 85 150

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d1 0.37 0.49 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

d2 0.62 0.82 1.05 1.38 1.61 2.07 2.47 3.07 4.02

d3 0.58 0.71 0.88 1.09 1.35 1.7 1.94 2.42 2.93 3.58 4.55

L 2.56 2.56 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.3 2.3 2.44 2.44 3.03 3.23 3.94 4.25 5.39 5.71 7.05

H1 0.71 0.71 0.73 0.89 0.98 1.02 1.18 1.18 1.57 1.57 2.13

W 3.94 3.94 3.94 4.92 5.87 5.87 7.48 7.48 9.84 9.84 12.72

C 0.2 0.2 0.2 0.26 0.31 0.31 0.39 0.39 0.47 0.47 0.63

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

Torque (in-lb) 31 35.4 48.7 66.4 97.4 132.8 177 354 531 752.3 1327.6

Weight (kg) 0.4 0.4 0.5 0.7 1 1.6 2.5 3.5 6.7 9.5 19.1 unit:mm Weight (lb) 0.8 0.8 1.1 1.5 2.2 3.5 5.5 7.7 14.8 20.9 42.1 unit:in

3-PC. SCREWED END BALL VALVE

2013N

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - TA-Luft approved (option) - Length conform to DIN 3202/4-M32013N-M3 (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND NUT AISI 304 SEAT PTFE / RTFE SEAL PACKING PTFE THRUST WASHER SPRING WASHER STEM NUT BOLT NUT AISI 304 SPRING WASHER HANDLE LOCKING DEVICE HANDLE SLEEVE PVC

DN 8 10 15 20 25 32 40 50 65 80 100

d1 11.6 12.5 15 20 25 32 38 50 63 76 96

L 65 65 65 75 85 101 112 130 162 188 224

H 58.5 58.5 62 62 77 82 100 108 137 145 179

H1 18 18 18.5 22.5 25 26 30 30 40 40 54

W 100 100 100 125 149 149 190 190 250 250 323

T 21.6 21.6 24 29.7 34.4 42.8 51.1 63.4 81.2 95.6 127.1

C 5 5 5 6.5 7.9 7.9 10 10 12 12 16

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

Torque (N-M) 3.5 4 5.5 7.5 11 15 20 40 60 85 150

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d1 0.46 0.49 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

L 2.56 2.56 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.3 2.3 2.44 2.44 3.03 3.23 3.94 4.25 5.39 5.71 7.05

H1 0.71 0.71 0.73 0.89 0.98 1.02 1.18 1.18 1.57 1.57 2.13

W 3.94 3.94 3.94 4.92 5.87 5.87 7.48 7.48 9.84 9.84 12.72

T 0.85 0.85 0.94 1.17 1.35 1.69 2.01 2.5 3.2 3.76 5

C 0.2 0.2 0.2 0.26 0.31 0.31 0.39 0.39 0.47 0.47 0.63

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

Torque (in-lb) 31 35.4 48.7 66.4 97.4 132.8 177 354 531 752.3 1327.6

Weight (kg) 0.4 0.4 0.5 0.7 1 1.6 2.5 3.5 6.7 9.5 19.1 unit:mm Weight (lb) 0.8 0.8 1.1 1.5 2.2 3.5 5.5 7.7 14.8 20.9 42.1 unit:in

3-PC. SOCKET WELD END BALL VALVE

2011NM

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - ISO 5211 Mounting pad - TA-Luft approved (option) - Length conform to DIN 3202/4-M32011NM-M3 (option) - Socket weld ends conform to ANSI B16.11 & DIN 3239 part2 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 12.5 15 20 25 32 38 50 63 76 96

d1 14.5 18 22 27.5 34 43 49 61 74 90 116

B 10 10 10 13 13 13 13 16 16 16 20

D 36 36 36 36 42 42 50 50 70 70 102

M M5 M5 M5 M5 M5 M5 M6 M6 M8 M8 M10

L 65 65 65 75 85 101 112 130 162 188 224

H 58.5 58.5 62 62 77 82 100 108 137 145 179

W 100 100 100 125 149 149 190 190 250 250 323

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

T 5 5 5 6.5 8 8 10 10 12 12 16

H1 19.3 19.3 19.4 22.4 25.6 25.6 29.7 29.7 39.4 39.4 53.7

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.49 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

d1 0.57 0.71 0.87 1.08 1.34 1.69 1.93 2.4 2.91 3.54 4.57

B 0.39 0.39 0.39 0.51 0.51 0.51 0.51 0.63 0.63 0.63 0.79

D 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76 4.02

M M5 M5 M5 M5 M5 M5 M6 M6 M8 M8 M10

L 2.56 2.56 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.3 2.3 2.44 2.44 3.03 3.23 3.94 4.25 5.39 5.71 7.05

W 3.94 3.94 3.94 4.92 5.87 5.87 7.48 7.48 9.84 9.84 12.72

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

T 0.2 0.2 0.2 0.26 0.31 0.31 0.39 0.39 0.47 0.47 0.63

H1 0.76 0.76 0.76 0.88 1.01 1.01 1.17 1.17 1.55 1.55 2.11

H2 ISO 5211 Torque (N-M) Weight (kg) 13.5 F03 0.4 7.5 13.5 F03 0.4 7.5 13.5 F03 0.5 7.5 16 F03 0.7 7.5 16.2 F04 1 12.5 16.2 F04 1.7 15 20 F05 2.4 20 20 F05 3.5 25 27.5 F07 6.7 64 27.5 F07 9.8 85 39.8 F10 19.2 95 unit:mm H2 ISO 5211 Torque (in-lb) Weight (lb) 0.53 F03 0.8 66.4 0.53 F03 0.8 66.4 0.53 F03 1.1 66.4 0.63 F03 1.6 66.4 0.64 F04 2.3 110.6 0.64 F04 3.6 132.8 0.79 F05 5.3 177 0.79 F05 7.7 221.3 1.08 F07 14.8 566.4 1.08 F07 21.6 752.3 1.57 F10 42.3 840.8 unit:in

2012NM

3-PC. BUTT WELD END BALL VALVE

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - ISO 5211 Mounting pad - TA-Luft approved (option) - Length conform to DIN 3202/4-M32012NM-M3 (option) - Butt weld ends conform to ANSI B16.25 & DIN 3239 part1 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 12.5 15 20 25 32 38 50 63 76 96

d1 14.5 18 22 27.5 34 43 49 61 74 90 116

d2 15.8 20.9 26.6 35.1 40.9 52.5 62.7 77.9 102

D 36 36 36 36 42 42 50 50 70 70 102

M M5 M5 M5 M5 M5 M5 M6 M6 M8 M8 M10

L 65 65 65 75 85 101 112 130 162 188 224

H 58.5 58.5 62 62 77 82 100 108 137 145 179

W 100 100 100 125 149 149 190 190 250 250 323

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

T 5 5 5 6.5 8 8 10 10 12 12 16

H1 19.3 19.3 19.4 22.4 25.6 25.6 29.7 29.7 39.4 39.4 53.7

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.49 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

d1 0.57 0.71 0.87 1.08 1.34 1.69 1.93 2.4 2.91 3.54 4.57

d2 0.62 0.82 1.05 1.38 1.61 2.07 2.47 3.07 4.02

D 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76 4.02

M M5 M5 M5 M5 M5 M5 M6 M6 M8 M8 M10

L 2.56 2.56 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.3 2.3 2.44 2.44 3.03 3.23 3.94 4.25 5.39 5.71 7.05

W 3.94 3.94 3.94 4.92 5.87 5.87 7.48 7.48 9.84 9.84 12.72

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

T 0.2 0.2 0.2 0.26 0.31 0.31 0.39 0.39 0.47 0.47 0.63

H1 0.76 0.76 0.76 0.88 1.01 1.01 1.17 1.17 1.55 1.55 2.11

3-PC. SCREWED END BALL VALVE

2013NM

FEATURES

ECONOMIC PATTERN

- Full port, 1/4"~4" (DN8~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - ISO 5211 Mounting pad - TA-Luft approved (option) - Length conform to DIN 3202/4-M32013NM-M3 (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 SEAT PTFE / RTFE DEAL PACKING PTFE THRUST WASHER GLAND NUT SPRING WASHER STEM NUT BOLT AISI 304 NUT SPRING WASHER HANDLE HANDLE SLEEVE PVC LOCKING DEVICE AISI 304

DN 8 10 15 20 25 32 40 50 65 80 100

d 11.6 12.5 15 20 25 32 38 50 63 76 96

L 65 65 65 75 85 101 112 130 162 188 224

H 58.5 58.5 62 62 77 82 100 108 137 145 179

W 100 100 100 125 149 149 190 190 250 250 323

D 36 36 36 36 42 42 50 50 70 70 102

A 39.9 39.9 46.7 52.2 58.2 69.6 77.8 90.1 114.6 168.7 215.4

M M5 M5 M5 M5 M5 M5 M6 M6 M8 M8 M10

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

T 5 5 5 6.5 8 8 10 10 12 12 16

H1 19.3 19.3 19.4 22.4 25.6 25.6 29.7 29.7 39.4 39.4 53.7

H2 13.5 13.5 13.5 16 16.2 16.2 20 20 27.5 27.5 39.8

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.49 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

L 2.56 2.56 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.3 2.3 2.44 2.44 3.03 3.23 3.94 4.25 5.39 5.71 7.05

W 3.94 3.94 3.94 4.92 5.87 5.87 7.48 7.48 9.84 9.84 12.72

D 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76 4.02

A 1.57 1.57 1.84 2.06 2.29 2.74 3.06 3.55 4.51 6.64 8.48

M M5 M5 M5 M5 M5 M5 M6 M6 M8 M8 M10

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 7/16"-20UNF 1/2"-20UNF 1/2"-20UNF 3/4"-10UNC 3/4"-10UNC 1"-8UNC

T 0.2 0.2 0.2 0.26 0.31 0.31 0.39 0.39 0.47 0.47 0.63

H1 0.76 0.76 0.76 0.88 1.01 1.01 1.17 1.17 1.55 1.55 2.11

H2 0.53 0.53 0.53 0.63 0.64 0.64 0.79 0.79 1.08 1.08 1.57

ISO 5211 Torque (N-M) Weight (kg) F03 0.4 7.5 F03 0.4 7.5 F03 0.5 7.5 F03 0.7 7.5 F04 1 12.5 F04 1.7 15 F05 2.4 20 F05 3.5 25 F07 6.7 64 F07 9.8 85 F10 19.2 95 unit:mm ISO 5211 Torque (in-lb) Weight (lb) F03 0.8 66.4 F03 0.8 66.4 F03 1.1 66.4 F03 1.6 66.4 F04 2.3 110.6 F04 3.6 132.8 F05 5.3 177 F05 7.7 221.3 F07 14.8 566.4 F07 21.6 752.3 F10 42.3 840.8 unit:in

2011ND

3-PC. SOCKET WELD END BALL VALVE

FEATURES

ECONOMIC PATTERN

- Full port, 1/2”~4” (DN15~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 direct mounting pad - Length conform to DIN 3202/4-M32011ND-M3 (option) - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Socket weld ends conform to ANSI B16.11 & DIN 3239 part2 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PARTS BOLT NUT SPRING WASHER CAP BODY BALL SEAT SEAL THRUST WASHER PACKING O-RING STEM GLAND RING BELLEVILLE WASHER LOCKING WASHER LOCKING DEVICE STEM NUT HANDLE HANDLE SLEEVE

MATERIAL AISI 304 ASTM A351-CF8M

DN 15 20 25 32 40 50 65 80 100

d1 15 20 25 32 38 50 63 76 96

d2 22 27.5 34 43 49 61 74 90 115.5

L 65 75 85 101 112 130 162 188 224

H 60 64 74 79 95 103 123 131.5 165.5

W 120 120 148 148 178 178 325 325 325

S 9 9 11 11 14 14 17 17 22

h1 8.5 8.5 11 11 13.5 13.5 20.5 20.5 22.5

d3 31 31 35.5 35.5 56 56 76 76 100

d4 36 36 42 42 50 50 70 70 102

d5 42 42 50 50 70 70 102 102 125

R1 2.75 2.75 2.75 2.75 3.5 3.5 4.5 4.5 5.5

R2 2.75 2.75 3.5 3.5 4.5 4.5 5.5 5.5 6.5

NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d1 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

d2 0.87 1.08 1.34 1.69 1.93 2.4 2.91 3.54 4.55

L 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.36 2.52 2.91 3.11 3.74 4.06 4.84 5.18 6.52

W 4.72 4.72 5.83 5.83 7.01 7.01 12.8 12.8 12.8

S 0.35 0.35 0.43 0.43 0.55 0.55 0.67 0.67 0.87

h1 0.33 0.33 0.43 0.43 0.53 0.53 0.81 0.81 0.89

d3 1.22 1.22 1.4 1.4 2.2 2.2 2.99 2.99 3.94

d4 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76 4.02

d5 1.65 1.65 1.97 1.97 2.76 2.76 4.02 4.02 4.92

R1 0.11 0.11 0.11 0.11 0.14 0.14 0.18 0.18 0.22

R2 0.11 0.11 0.14 0.14 0.18 0.18 0.22 0.22 0.26

PTFE / RTFE PTFE VITON ASTM A276-316 AISI 304 AISI 301 AISI 304 PVC

Torque (N-M) 7.5 11 14 21 27 50 85 97 150 unit:mm Torque (in-lb) 66.4 97.4 123.9 185.9 239 442.5 752.3 858.5 1327.6 unit:in

3-PC. BUTT WELD END BALL VALVE

2012ND

FEATURES

ECONOMIC PATTERN

- Full port, 1/2"~4" (DN15~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 direct mounting pad - Length conform to DIN 3202/4-M32012ND-M3 (option) - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Socket weld ends conform to ANSI B16.25 & DIN 3239 part1 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PARTS BODY CAP BALL BOLT NUT SPRING WASHER BALL SEAT BODY SEAL THRUST WASHER PACKING O-RING STEM GLAND RING BELLEVILLE WASHER LOCKING WASHER LOCKING DEVICE STEM NUT HANDLE HANDLE SLEEVE

MATERIAL ASTM A351-CF8M

DN 15 20 25 32 40 50 65 80 100

d1 15 20 25 32 38 50 63 76 96

d2 22.3 27.7 34.4 43.2 49.3 61.5 74.5 91 115.5

L 65 75 85 101 112 130 162 188 224

H 60 64 74 79 95 103 141 149.5 187.5

W 120 120 148 148 178 178 325 325 325

S 9 9 11 11 14 14 17 17 22

h1 8.5 8.5 11 11 13.5 13.5 20.5 20.5 22.5

d3 31 31 35.5 35.5 56 56 76 76 100

d4 36 36 42 42 50 50 70 70 102

d5 42 42 50 50 70 70 102 102 125

R1 2.75 2.75 2.75 2.75 3.5 3.5 4.5 4.5 5.5

R2 2.75 2.75 3.5 3.5 4.5 4.5 5.5 5.5 6.5

NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d1 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

d2 0.88 1.09 1.35 1.7 1.94 2.42 2.93 3.58 4.55

L 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.36 2.52 2.91 3.11 3.74 4.06 5.55 5.89 7.38

W 4.72 4.72 5.83 5.83 7.01 7.01 12.8 12.8 12.8

S 0.35 0.35 0.43 0.43 0.55 0.55 0.67 0.67 0.87

h1 0.33 0.33 0.43 0.43 0.53 0.53 0.81 0.81 0.89

d3 1.22 1.22 1.4 1.4 2.2 2.2 2.99 2.99 3.94

d4 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76 4.02

d5 1.65 1.65 1.97 1.97 2.76 2.76 4.02 4.02 4.92

R1 0.11 0.11 0.11 0.11 0.14 0.14 0.18 0.18 0.22

R2 0.11 0.11 0.14 0.14 0.18 0.18 0.22 0.22 0.26

AISI 304 PTFE / RTFE PTFE VITON ASTM A276-316 AISI 304 AISI 301 AISI 304 PVC

Torque (N-M) 7.5 11 14 21 27 50 85 97 150 unit:mm Torque (in-lb) 66.4 97.4 123.9 185.9 239 442.5 752.3 858.5 1327.6 unit:in

2013ND

3-PC. SCREWED END BALL VALVE

FEATURES

ECONOMIC PATTERN

- Full port, 1/2"~4" (DN15~DN100) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Locking device - Anti-static device - ISO 5211 Direct mounting pad - Length conform to DIN 3202/4-M32013ND-M3 (option) - ISO 15848 fugitive emission approved (option) - Automation accessories (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PARTS BOLT BOLT NUT SPRING WASHER CAP BODY BALL SEAT SEAL THRUST WASHER PACKING O-RING STEM GLAND RING BELLEVILLE WASHER LOCKING WASHER LOCKING DEVICE STEM NUT HANDLE HANDLE SLEEVE

MATERIAL AISI 304 ASTM A351-CF8M PTFE / RTFE PTFE VITON ASTM A276-316

DN 15 20 25 32 40 50 65 80 100

d 15 20 25 32 38 50 63 76 96

L 65 75 85 101 112 130 162 188 224

H 60 64 74 79 95 103 123 131.5 165.5

W 120 120 148 148 178 178 325 325 325

S 9 9 11 11 14 14 17 17 22

h1 8.5 8.5 11 11 13.5 13.5 20.5 20.5 22.5

d2 31 31 35.5 35.5 56 56 76 76 100

d3 36 36 42 42 50 50 70 70 102

d4 42 42 50 50 70 70 102 102 125

R1 2.75 2.75 2.75 2.75 3.5 3.5 4.5 4.5 5.5

R2 2.75 2.75 3.5 3.5 4.5 4.5 5.5 5.5 6.5

Weight (kg) 0.6 0.7 1.1 1.7 2.6 3.7 7.1 10.2 19.4

NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.78

L 2.56 2.95 3.35 3.98 4.41 5.12 6.38 7.4 8.82

H 2.36 2.52 2.91 3.11 3.74 4.06 4.84 5.18 6.52

W 4.72 4.72 5.83 5.83 7.01 7.01 12.8 12.8 12.8

S 0.35 0.35 0.43 0.43 0.55 0.55 0.67 0.67 0.87

h1 0.33 0.33 0.43 0.43 0.53 0.53 0.81 0.81 0.89

d2 1.22 1.22 1.4 1.4 2.2 2.2 2.99 2.99 3.94

d3 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76 4.02

d4 1.65 1.65 1.97 1.97 2.76 2.76 4.02 4.02 4.92

R1 0.11 0.11 0.11 0.11 0.14 0.14 0.18 0.18 0.22

R2 0.11 0.11 0.14 0.14 0.18 0.18 0.22 0.22 0.26

Weight (lb) 1.2 1.6 2.4 3.7 5.7 8.2 15.7 22.5 42.8

AISI 304

PVC

Torque (N-M) 7.5 11 14 21 27 50 85 97 150 unit:mm Torque (in-lb) 66.4 97.4 123.9 185.9 239 442.5 752.3 858.5 1327.6 unit:in

HIGH PURITY BALL VALVE APPLICATIONS: Pharmaceutical, Bio-Tech, Semiconductor, Vacuum, Drinking Water. Stainless Steel handle with Vinyl sleeve. Lockable in both open and closed position. Blow-out proof stem & Live-loaded design Antistatic Device available for volatile or flammable appication. Precision fit bottom entry 316L stem for maximum operating safety.

Precison Engineered solid 316L stainless steel ball with ID dimensions equal to tube ID, ensuring maximun flow capacity with minimum pressure drop across the valve.

PTFE-TFM seats - hygienic non slotted design which eliminates entrapment areas. Provides tight shutoff and low pressures, reduces wear and valve torque. Cavity filled seats available for reducing dead volume between the ball and the body.

Mechanical and Electropolished surface finishes as per ASME BPE Table SF-3 to suit specfic customer requirements.

Full encapsulated PTFE/TFM seal which prevent leakage to atmosphere or in vacuum service to internal media.

Clamp or Butt Weld ends to ASME BPE with sulphur controlled between 0.005 and 0.017%. Mechanical and Electropolished Interna surface available as per customer requirement.

Body and Trim Materials

Seats

The valve body and ends are castings made from Stainless Steel conforming to ASTM A351 CF3M which improves the resistance to intergranular corrosion caused by welding. Welded end castings have low sulphur content of 0.005-0.017% and ferrite < 3%. The ball and stem are from Stainless Steel conforming to AISI 316L. These materials are offered for Biochemical, pharmaceutical, chemical and food machine equipment.

A flexible seat design provides tight shutoff at high and low pressures, reduces wear and valve torque. The seats are designed for low torque giving bubble tight shutoff and have no equalizing pressure slots or chamfers on the perimeter. Other seat designs available are Cavity Filler seats for reducing dead volume in the valve cavity.

Stem & Ball All valves have blowout proof stems. And a highly polished solid ball ensures tight shutoff and long service life. The ball orifice matches the tube internal diameter to reduce product deposits being trapped in the line and minimize pressure drop. Its post leading edges are rounded to eliminate excessive wear of the seats.

Precision cast stainless steel construction, solution annealed/normalised ensuring highest quality and added strength. Each body is etched with a heat number for material traceability. Purge ports available on the integral bosses for CIP or SIP applications.

End Connections All ends are one-piece castings and are machined on all wetted parts to high garde finish. The standard ends are tube end, hygienic clamp or extended tube end.

HIGH PURITY BALL VALVE

Surface Finish Table SF-1 Acceptance Criteria for Stainless Steel and Higher Alloy Mechanically Polished Product Contact Surface Finishes Anomaly or Indication

Acceptance Criteria

Pits

If diameter <0.020 in. and bottom is shiny. Pits <0.003 in. diameter are irrelevant and acceptable. No more than 4 pits per each 1/2 in. x 1/2 in. inspection window. The cumulative total of all relevant pits shall not exceed 0.040 in. None accepted. If Ra max. is met. As welded shall meet requirements of MJ-6. If welds are finished, then shall be smooth and blended. None accepted. For tubing, if cumulative length is <12.0 in. per 20 ft tube length or prorated and if depth is <0.003 in. For fittings, valves, and other process components, if length is <0.25 in. cumulatively, depth <0.003 in. and Ramax. is met. For vessels, if length < 0.50 in. at 0.003 depth and if <3 per inspection window. None accepted. If Ra max. is met. None accepted, visual inspection. See Table SF-3. For tubing, up to 3 per 20 ft length or prorated, if <75% of the width of the weld bead. For fittings, valves, vessels, and other process components, none accepted (as welded shall meet the requirements of MJ-6 and Table MJ-3). None open to the surface.

Cluster of pits Dents Finishing marks Welds Nicks Scratches

Surface cracks Surface inclusions Surface residuals Surface roughness (Ra) Weld slag

Porosity

Table SF-3 Ra Readings For Product Contact Surfaces Mechanically Polished [Note (1)] Ra Max.

Surface Designation SFV1 SFV2 SFV3

μ-in.

μm

20 25 30

0.51 0.64 0.76

Mechanically Polished [Note (1)] and Electropolished Ra Max.

Surface Designation SFV4 SFV5 SFV6

μ-in.

μm

15 20 25

0.38 0.51 0.64

NOTE: (1) Or any other finishing method that meets the Ra max.

Grit : Measures the number of scratches per linear inch of

Conversion Chart Standard

GENERAL NOTES: (a) All Ra readings are taken across the lay, wherever possible. (b) No single Ra reading shall exceed the Ra max. value in this table. (c) Other Ra readings are available if agreed upon between owner/user and manufacturer, not to exceed values in this table.

RMS

Grit

μ-in.

μm

μ-in.

μm

150g

27-32

.68-.80

30-35

.76-.89

180g

18-23

.46-.58

20-25

.51-.64

240g

14-18

.34-.46

15-20

.38-.51

320g

8-10

.21-.25

9-11

.23-.28

abrasive pad. Higher numbers indicate a smoother finish. RMS : Defined as Root Mean Square roughness, this method measures a sample for peaks and valleys. Lower numbers indicate a smoother finish. Ra : Known as the Arithmetic Mean, this measurement represents the average value of all peaks and valleys. Lower numbers indicate a smooth finish.

HIGH PURITY BALL VALVE

2013KB

FEATURES - Tube port, 1/2"~2" (DN15~DN50) - Body W.P. : 1000 WOG (PN63) - Tube End W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad 2013KB-BPE - Tube end castings have low sulphur content of 0.005-0.017% - Extended tube end (ETO) ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PARTS BODY CAP BALL STEM SEAT SEAL THRUST WASHER PACKING GLAND RING BELLEVILLE WASHER LOCKING WASHER STEM WASHER STEM NUT BOLT BOLT WASHER NUT STOP PIN LOCKING DEVICE HANDLE HANDLE SLEEVE

MATERIAL ASTM A351-CF3M ASTM A276-316L PTFE / TFM1600 PTFE AISI 304 AISI 301

AISI 304

PVC

ISO5211

Torque(N-M)

66.2

118

53.5

114

12.7

9.4

3/8"-24UNF

5.7

F03

4.5

76.9

124

114

19.05

15.75

3/8"-24UNF

5.7

F03

103

141

146

25.4

22.1

7/6"-20UNF

7.5

F04

110

146

31.75

28.45

7/6"-20UNF

7.5

F04

7.91

139.5

157

178

38.1

34.8

9/16"-18UNF

8.6

F05

158.7

172

89.5

178

50.8

47.5

9/16"-18UNF

8.6

F05

NPS

ISO5211

Torque(in-lb)

1/2"

2.61

4.65

2.11

4.49

0.5

0.37

1.42

3/8"-24UNF

0.23

F03

39.8

3/4"

3.03

4.89

2.17

4.49

0.75

0.62

1.42

3/8"-24UNF

0.2

F03

53.1 97.4

unit:mm

4.06

5.56

2.6

5.75

0.87

1.66

7/6"-20UNF

0.3

F04

1-1/4"

4.33

2.80

5.75

1.25

1.12

1.65

7/6"-20UNF

0.3

F04

1-1/2"

5.49

6.19

3.19

7.01

1.5

1.37

1.97

9/16"-18UNF

0.34

F05

132.8

6.25

6.78

3.53

7.01

1.87

1.97

9/16"-18UNF

0.34

F05

194.7 unit:in

2013KB

HIGH PURITY BALL VALVE

FEATURES - Tube port, 2-1/2"~4" (DN65~DN100) - Body W.P. : 1000 WOG (PN63) - Tube End W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad 2013KB-BPE - Tube end castings have low sulphur content of 0.005-0.017% - Extended tube end (ETO) ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

60.2

63.5

159

72.9

100

PARTS BODY CAP BALL STEM SEAT SEAL THRUST WASHER PACKING GLAND RING BELLEVILLE WASHER LOCKING WASHER STEM NUT WRENCH BLOCK STOPPER BOLT STOP PIN HANDLE BOLT

185 132.1 222

40.6

M10

102

70.1

85.1

M20*2.5

76.2 177.8

220 165.6 349

42.7

M10

44.5

80.5

102

97.3 101.6 215.9

250 179.1 349

42.9

M10

44.5

80.5

102

MATERIAL ASTM A351-CF3M ASTM A276-316L PTFE / TFM1600 PTFE AISI 304 AISI 301

AISI 304

ISO 5211 Torque (N-M) F10

102.1 19.1 1"-14UNEF

F10

102.1 19.1 1"-14UNEF

F10

50 unit:mm

NPS

2-1/2" 2.37

2.5

6.26

7.28

5.2

8.74

1.6

M10

1.26

2.52

4.02

2.76

3.35

0.55

M20*2.5

ISO 5211 Torque (in-lb) F10

256.7

2.87

8.66

6.52 13.74 1.68

M10

1.75

3.17

4.02

3.78

4.02

0.75 1"-14UNEF

F10

309.8

3.83

8.5

9.84

7.05 13.74 1.69

M10

1.75

3.17

4.02

3.78

4.02

0.75 1"-14UNEF

F10

442.5 unit:in

2013KC

HIGH PURITY BALL VALVE

FEATURES - Clamp end, 1/2"~2" (DN15~DN50) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad 2013KC-BPE - Clamp end castings have low sulphur content of 0.005-0.017% ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PARTS BODY CAP BALL STEM BALL SEAT GASKET THRUST WASHER PACKING GLAND RING BELLEVILLE WASHER LOCKING WASHER STEM WASHER STEM NUT BOLT BOLT WASHER NUT STOP PIN LOCKING DEVICE HANDLE HANDLE SLEEVE

MATERIAL ASTM A351-CF3M ASTM A276-316L PTFE / TFM1600 PTFE AISI 304 AISI 301

AISI 304

PVC

ISO5211

Torque(N-M)

88.9

53.5

114

9.4

25.4

3/8"-24UNF

5.7

F03

4.5

101.6

55.0

114

15.75

25.4

3/8"-24UNF

5.7

F03

121.9

66.0

146

22.1

50.4

7/16"-20UNF

7.5

F04

130

70.0

146

28.5

50.4

7/16"-20UNF

7.5

F04

139.7

81.0

178

34.8

50.4

9/16"-18UNF

8.6

F05

158.76

89.5

178

47.5

63.9

9/16"-18UNF

8.6

F05

NPS

ISO5211

Torque(in-lb)

1/2"

3.5

2.11

4.49

0.37

1.42

3/8"-24UNF

0.23

F03

39.8

3/4"

2.17

4.49

0.62

1.42

3/8"-24UNF

0.2

F03

53.1

4.80

2.6

5.75

0.87

1.98

1.65

7/16"-20UNF

0.3

F04

97.4

1-1/4"

5.12

2.76

5.75

1.12

1.98

1.65

7/16"-20UNF

0.3

F04

106.2

1-1/2"

5.5

3.19

7.01

1.37

1.98

1.97

9/16"-18UNF

0.34

F05

132.8

6.25

3.52

7.01

1.87

2.52

1.97

9/16"-18UNF

0.34

F05

194.7

unit:mm

unit:in

HIGH PURITY BALL VALVE

2013KC

FEATURES - Clamp end, 2-1/2"~4" (DN65~DN100) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad 2013KC-BPE - Clamp end castings have low sulphur content of 0.005-0.017% ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PARTS BODY CAP BALL STEM SEAT SEAL THRUST WASHER PACKING GLAND RING BELLEVILLE WASHER LOCKING WASHER STEM NUT WRENCH BLOCK STOPPER BOLT STOP PIN HANDLE BOLT

MATERIAL ASTM A351-CF3M ASTM A276-316L PTFE / TFM1600 PTFE AISI 304 AISI 301

AISI 304

ISO 5211

Torque (N-M)

60.2

77.4

159

132.1

222

40.6

M10

102

70.1

85.1

M20*2.5

F10

72.9

90.9 177.8 165.6

349

42.7

M10

44.5

80.5

102

102.1 19.1 1"-14UNEF

F10

100

97.3 118.9 215.9 179.1

349

42.9

M10

44.5

80.5

102

102.1 19.1 1"-14UNEF

F10

unit:mm NPS

2-1/2" 2.37

2.5

6.26

5.2

8.74

1.6

M10

1.26

2.52

4.02

2.76

3.35

0.55

M20*2.5

ISO 5211 Torque (in-lb) F10

256.7

2.87

6.52 13.74 1.68

M10

1.75

3.17

4.02

3.78

4.02

0.75 1"-14UNEF

F10

309.8

3.83

8.5

7.05 13.74 1.69

M10

1.75

3.17

4.02

3.78

4.02

0.75 1"-14UNEF

F10

442.5

unit:in

2012CM

CLEAN BALL VALVE

FEATURES - Tube port, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Tube End W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DN 15 20 25 40 50 65 80 100 NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4"

d 9.6 15.8 22.1 34.8 47.7 60.3 72.9 97.5

D 12.7 19.1 25.4 38.2 50.8 63.5 76.4 101.7

W 141.2 141.2 141.2 188.3 188.3 260 260 295

H 63.5 66.6 69.4 100.6 110.6 139.2 148.2 175

L L1 T 90.7 20 26.7 103 22.5 33 115 25 38 140 25 54 158 25 69 197 25 85 228 25 101.6 241.8 25 121.8

H d D W L L1 0.38 0.5 5.56 2.5 3.57 0.79 0.62 0.75 5.56 2.62 4.06 0.89 0.87 1 5.56 2.73 4.53 0.98 1.37 1.5 7.41 3.96 5.51 0.98 1.88 2 7.41 4.35 6.22 0.98 2.37 2.5 10.24 5.48 7.76 0.98 2.87 3.01 10.24 5.83 8.98 0.98 3.84 4 11.61 6.89 9.52 0.98

T 1.05 1.3 1.5 2.13 2.72 3.35 4 4.8

C 6.5 6.5 6.5 8.5 8.5 12 12 16

I 37 37 42 50 50 72 72 94

C 0.26 0.26 0.26 0.33 0.33 0.47 0.47 0.63

I 1.46 1.46 1.65 1.97 1.97 2.83 2.83 3.7

PARTS BODY CAP BALL SEAT SEAL THRUST WASHER PACKING GLAND NUT STEM WASHER STEM NUT STEM BOLT WASHER NUT BOLT HANDLE HANDLE SLEEVE LOCKING DEVICE

MATERIAL ASTM A351-CF8M

PTFE

AISI 304 AISI 316 AISI 304 PVC AISI 304

K K1 13 18 13 18.7 13 18 19.5 30 19.5 29 26 37.7 26 38.2 35 52

P 36 36 42 50 50 70 70 102

M M5 M5 M5 M6 M6 M8 M8 M10

Torque For Cavity Filler Seat (N-M) Weight (kg) S 3.6 0.7 M10 5.1 0.9 M10 8.1 1.2 M10 19.5 2.6 M12 26 4 M12 52 8.4 3/4"W 58.5 13.5 3/4"W 84.5 19.5 1"W

K 0.51 0.51 0.51 0.77 0.77 1.02 1.02 1.38

P 1.42 1.42 1.65 1.97 1.97 2.76 2.76 4.02

M M5 M5 M5 M6 M6 M8 M8 M10

Torque For Cavity Filler Seat (in-lb) Weight (lb) S 32.2 1.6 M10 44.9 2.1 M10 71.3 2.6 M10 172.6 5.7 M12 230.1 8.9 M12 460.2 18.6 3/4"W 517.8 29.8 3/4"W 747.9 43 1"W

K1 0.71 0.74 0.71 1.18 1.14 1.48 1.5 2.05

unit:mm

unit:in

2013CM

CLEAN BALL VALVE

FEATURES - Clamp end, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DN 15 20 25 40 50 65 80 100 NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4"

D 9.6 15.8 22.1 34.8 47.7 60.3 72.9 97.5

W 141.2 141.2 141.2 188.3 188.3 260 260 295

H 63.5 66.6 69.4 100.6 110.6 139.2 148.2 175

D W H 0.38 5.56 2.5 0.62 5.56 2.62 0.87 5.56 2.73 1.37 7.41 3.96 1.88 7.41 4.35 2.37 10.24 5.48 2.87 10.24 5.83 3.84 11.61 6.89

H1 H2 48.5 18 51.8 18.7 54.5 18 82.5 30 91.5 29 117.2 37.7 126.7 38.2 162 52

H3 L 13 90.7 13 103 13 115 19.5 140 19.5 158 26 197 26 228 35 241.8

G 25.5 25.5 29.7 35.4 35.4 49.5 49.5 72.1

K 37 37 42 50 50 72 72 94

J 25.4 25.4 50.5 50.5 64 77.5 91 119

H1 1.91 2.04 2.15 3.25 3.6 4.61 4.99 6.38

H3 0.51 0.51 0.51 0.77 0.77 1.02 1.02 1.38

G 1 1 1.17 1.39 1.39 1.95 1.95 2.84

K 1.46 1.46 1.65 1.97 1.97 2.83 2.83 3.7

J 1 1 1.99 1.99 2.52 3.05 3.58 4.69

H2 0.71 0.74 0.71 1.18 1.14 1.48 1.5 2.05

L 3.57 4.06 4.53 5.51 6.22 7.76 8.98 9.52

PARTS BODY CAP BALL SEAT SEAL THRUST WASHER PACKING GLAND NUT STEM WASHER STEM NUT STEM BOLT WASHER NUT BOLT HANDLE HANDLE SLEEVE LOCKING DEVICE

MATERIAL ASTM A351-CF8M

PTFE

AISI 304 AISI 316 AISI 304 PVC AISI 304

ISO 5211 F03 F03 F04 F05 F05 F07 F07 F10

Torque For Cavity Filler Seat (N-M) 3.6 5.1 8.1 19.5 26 52 58.5 84.5

Weight (kg) 0.8 1 1.4 2.7 4.2 8.7 14.2 20.5

N ISO 5211 0.26 F03 0.26 F03 0.26 F04 0.33 F05 0.33 F05 0.47 F07 0.47 F07 0.63 F10

Torque For Cavity Filler Seat (in-lb) 32.2 44.9 71.3 172.6 230.1 460.2 517.8 747.9

Weight (lb) 1.7 2.1 3 5.9 9.2 19.2 31.3 45.2

N 6.5 6.5 6.5 8.5 8.5 12 12 16

unit:mm

unit:in

2013CD

CLEAN BALL VALVE

FEATURES - Clamp end, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Cavity filled seats (option) - Locking device - ISO 5211 Direct mounting pad - Automation accessories (option) MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A351-CF3M 2 CAP 3 BALL ASTM A351-CF8M 4 SEAT PTFE / TFM1600 5 STEM ASTM A276-316 6 THRUST WASHER PTFE 7 O-RING VITON 8 PACKING PTFE 9 GLAND RING AISI 304 10 BELLEVILLE WASHER AISI 301 11 NUT 12 LOCKING WASHER 13 FLAT WASHER AISI 304 14 STOP PIN 15 HANDLE 16 HANDLE SLEEVE PVC 17 SPRING WASHER 18 NUT AISI 304 19 BOLT

DN 15 20 25 40 50 65 80 100

D 42 42 50 70 70 102 102 125

D1 36 36 42 50 50 70 70 102

D2 45.5 47 57.5 83 100 126 148 183

d 9.6 15.8 22.1 34.8 47.7 60.3 72.9 97.5

d1 25.4 25.4 50.5 50.5 64 77.5 91 119

R 2.75 2.75 3.5 4.5 4.5 5.5 5.5 6.5

R1 2.75 2.75 2.75 3.5 3.5 4.5 4.5 5.5

S 9 9 11 14 14 17 17 22

L 90.7 103 115 139 158 197 228 241.8

H 121.3 121.3 150 150 180 180 243.5 285

H1 9 11 11 14 14 17 17 22

W 64.7 64.7 79 96.5 104 142 150 185

NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4"

D 1.65 1.65 1.97 2.76 2.76 4.02 4.02 4.92

D1 1.42 1.42 1.65 1.97 1.97 2.76 2.76 4.02

D2 1.79 1.85 2.26 3.27 3.94 4.96 5.83 7.2

d 0.38 0.62 0.87 1.37 1.88 2.37 2.87 3.84

d1 1 1 1.99 1.99 2.52 3.05 3.58 4.69

R 0.11 0.11 0.14 0.18 0.18 0.22 0.22 0.26

R1 0.11 0.11 0.11 0.14 0.14 0.18 0.18 0.22

S 0.35 0.35 0.43 0.55 0.55 0.67 0.67 0.87

L 3.57 4.06 4.53 5.47 6.22 7.76 8.98 9.52

H 4.78 4.78 5.91 5.91 7.09 7.09 9.59 11.22

H1 0.35 0.43 0.43 0.55 0.55 0.67 0.67 0.87

W 2.55 2.55 3.11 3.8 4.09 5.59 5.91 7.28

Torque (N-m) 5 7.5 11 16 20 40 50 60 unit:mm Torque (in-lb) 44.3 66.4 97.4 141.6 177 354 442.5 531 unit:in

2057C

CLEAN BALL VALVE

FEATURES - Clamp end, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-Static Device (option) - Cavity filled seats - Locking device - ISO 5211 Direct mounting pad - Automation accessories (option) MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A351-CF3M 2 CAP 3 FLAT CAP 4 BALL ASTM A351-CF8M 5 SEAT A PTFE / TFM1600 6 SEAT B 7 SEAL PTFE 8 STEM ASTM A276-316 9 THRUST WASHER PTFE 10 PACKING 11 GLAND RING AISI 304 12 BELLEVILLE WASHER AISI 301 13 LOCKING WASHER 14 FLAT WASHER 15 STOP PIN AISI 304 16 STEM NUT 17 HANDLE 18 HANDLE SLEEVE PVC 19 SPRING WASHER 20 BOLT A AISI 304 21 BOLT B

DN 15 20 25 40 50 65 80 100

A 9 9 11 14 14 17 23 23

B 44.5 48 59 72 82 100 125.5 135.5

C 23.5 26 30.5 40 50 61 74 84

d 9.4 15.8 22.1 35 47.6 60 73 97.4

D 25.4 25.4 50.4 50.4 63.9 77.5 90.9 119

H 79 82.5 91 107 117 108.5 134 144

L 118 127 152.4 175 190 228 260 318

S 9 9 11 14 14 17 22 22

W 122 122 137 183 183 370 400 400

ISO 5211 F03/F04 F03/F04 F04/F05 F05/F07 F05/F07 F07/F10 F10/F12 F10/F12

NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4"

A 0.35 0.35 0.43 0.55 0.55 0.67 0.91 0.91

B 1.75 1.89 2.32 2.83 3.23 3.94 4.94 5.33

C 0.93 1.02 1.2 1.57 1.97 2.4 2.91 3.31

d 0.37 0.62 0.87 1.38 1.87 2.36 2.87 3.83

D 1 1 1.98 1.98 2.52 3.05 3.58 4.69

H 3.11 3.25 3.58 4.21 4.61 4.27 5.28 5.67

L 4.65 5 6 6.89 7.48 8.98 10.24 12.52

S 0.35 0.35 0.43 0.55 0.55 0.67 0.87 0.87

W 4.8 4.8 5.39 7.2 7.2 14.57 15.75 15.75

ISO 5211 F03/F04 F03/F04 F04/F05 F05/F07 F05/F07 F07/F10 F10/F12 F10/F12

Torque (N-m) 4.4 5.9 11.7 18.2 26 65 106.6 130 unit:mm Torque (in-lb) 39.1 51.8 103.6 161.1 230.1 575.3 943.5 1150.6 unit:in

HIGH PRESSURE BALL VALVE

2007W21 FEATURES

- Standard port, 1/4"~2" (DN8~DN50) - W.P. : 2160 WOG - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 mounting pad - Seal welded ends - ASME B16.34 Wall thickness - NACE MR0175 - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7a 7b 8 9 10 11 12 13

PARTS BODY CAP BALL SEAT SEAL THRUST WASHER PACKING PACKING STEM GLAND NUT SPRING WASHER NUT HANDLE HANDLE SLEEVE

DN 8 10 15 20 25 40 50

L 67 67 67 78.3 90 108 125.6

W 123 123 123 144 144 140 140

H 57.3 57.3 57.3 68.3 71.7 91.5 90

d 11 11 11 15 20 31.8 38

N PS 1/4" 3/8" 1/2“ 3/4" 1" 1-1/2" 2"

L 2.64 2.64 2.64 3.08 3.54 4.25 4.94

W 4.84 4.84 4.84 5.67 5.67 5.51 5.51

H 2.26 2.26 2.26 2.69 2.82 3.6 3.54

d 0.43 0.43 0.43 0.59 0.79 1.25 1.5

MATERIAL ASTM A351-CF8M RTFE GRAPHITE CTFE GRAPHITE ASTM A276-316 AISI 304 PVC

D 36 36 36 42 50 50 50

unit:mm D 1.42 1.42 1.42 1.65 1.97 1.97 1.97 unit:in

HIGH PRESSURE BALL VALVE

2007W36 FEATURES

- 1/4"~2" (DN8~DN50) - W.P. : 3600 WOG (PN250) - W.T. : -20째C~260째C (-4째F~500째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - Seal welded ends - ASME B16.34 Wall thickness - NACE MR0175 - API 607 Fire safe approved - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 IISO7/1 & EN10226 MATERIAL ITEM PARTS BODY 1 ASTM A351-CF8M ASTM A216-WCB CAP 2 ASTM A351-CF8M BALL 3 ASTM A276-316 STEM 4 AISI 304 GLAND NUT 5 PEEK SEAT 6 SEAL 7 GRAPHITE PACKING 8 CTFE 9 THRUST WASHER HANDLE 10 AISI 304 LOCKING PAD 11

DN 8 F

L 76.2

H 56.6

W 142

d 6.35

B 32

C 39

I SO 5 21 1 F03

M M5*P0.8

Torque (N-M) 9.5

We i g h t ( k g ) 0.7

15 F

101.6

56.6

142

12.7

F03

M5*P0.8

9.5

0.8

20 F

108

76.1

173

F04

M5*P0.8

1.3

25 S

108

76.1

173

F04

M5*P0.8

1.3

40 F

134

117

247.5

38.1

F07

M8*P1.25

4.9

50 S 158.1 117 247.5 F: Full Port S: Standard Port N PS L H W 1/4" F 3 2.23 5.59

38.1

F07

M8*P1.25

d 0.25

B 1.26

C 1.54

I SO 5 21 1 F03

M M5*P0.8

T o r q u e ( i n -l b) 84.1

5.4 unit:mm W ei g h t ( lb) 1.5

1/2" F

2.23

5.59

0.5

1.26

1.54

F03

M5*P0.8

84.1

3/4" F

4.25

6.81

0.75

1.85

F04

M5*P0.8

247.8

1" S

4.25

6.81

0.75

1.85

F04

M5*P0.8

247.8

2.8

1-1/2" F

5.28

4.61

9.74

1.5

3.03

3.39

F07

M8*P1.25

469.1

10.8

2" S 6.22 4.61 9.74 F: Full Port S: Standard Port

1.5

3.23

3.39

F07

M8*P1.25

469.1

11.8

1.7

unit:in

HIGH PRESSURE BALL VALVE

2007W60 FEATURES

- 1/4"~2" (DN8~DN50) - W.P. : 6000 WOG (PN420) - W.T. : -20째C~260째C (-4째F~500째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - Seal welded ends - ASME B16.34 Wall thickness - NACE MR0175 - API 607 Fire safe approved - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 MATERIAL ITEM PARTS BODY 1 ASTM A351-CF8M ASTM A216-WCB CAP 2 ASTM A351-CF8M BALL 3 ASTM A276-316 STEM 4 AISI 304 GLAND NUT 5 PEEK SEAT 6 SEAL 7 GRAPHITE PACKING 8 CTFE 9 THRUST WASHER HANDLE 10 AISI 304 LOCKING PAD 11

H L DN 56.6 76.2 8 F 56.6 76.2 10 S 56.6 101.6 15 F 76.1 108 20 F 76.1 108 25 S 83.1 122 25 F 117 134 40 F 117 158.1 50 S F:Full Port S:Standard Port H L NPS 2.23 3 1/4" F 2.23 3 3/8" S 2.23 4 1/2" F 3 4.25 3/4" F 3 4.25 1" S 3.27 4.8 1" F 4.61 5.28 1-1/2" F 4.61 6.22 2" S F:Full Port S:Standard Port

W 142 142 142 173 173 173 247.5 247.5

d 6.35 6.35 12.7 19 19 25.4 38.1 38.1

B 32 32 38 47 55 55 77 92

C 39 39 39 52 55 68 97 97

ISO 5211 F03 F03 F03 F04 F04 F05 F07 F07

M M5*P0.8 M5*P0.8 M5*P0.8 M5*P0.8 M5*P0.8 M6*P1 M8*P1.25 M8*P1.25

Torque (N-m) 9 9 9 27.1 27.1 33.3 51.4 51.4

W 5.59 5.59 5.59 6.81 6.81 6.81 9.74 9.74

d 0.25 0.25 0.5 0.75 0.75 1 1.5 1.5

B 1.26 1.26 1.5 1.85 2.17 2.17 3.03 3.62

C 1.54 1.54 1.54 2.05 2.17 2.68 3.82 3.82

ISO 5211 F03 F03 F03 F04 F04 F05 F07 F07

M M5*P0.8 M5*P0.8 M5*P0.8 M5*P0.8 M5*P0.8 M6*P1 M8*P1.25 M8*P1.25

Torque (in-lb) 80 80 80 240 240 295 455 455

Weight (kg) 0.7 0.7 0.9 1.6 2.7 1.8 6.1 7.4 unit:mm Weight (lb) 1.5 1.5 2 3.4 5.9 4 13.4 16.3 unit:in

2011KM3M

HIGH PRESSURE BALL VALVE

FEATURES - Full port, 1/4"~2" (DN8~DN50) - W.P. : 3000 WOG (PN200) - W.T. : -20°C~260°C (-4°F~500°F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - ASME B16.34 Wall thickness - NACE MR0175 (option) - Socket weld ends conform to ANSI B16.11 & DIN 3239 part2 MATERIAL ITEM PARTS ASTM A351-CF8M 1 BODY 2 CAP ASTM A351-CF3M ASTM A216-WCB 3 SEAT PEEK / DELRIN 4 BALL ASTM A351-CF8M 5 STEM ASTM A276-316 6 SEAL RTFE 7 THRUST WASHER RTFE / CTFE 8 PACKING 9 GLAND RING AISI 304 10 BELLEVILLE WASHER AISI 301 11 STEM NUT 12 LOCKING WASHER 13 HANDLE AISI 304 14 HANDLE NUT 15 SPRING WASHER 16 BOLT 17 HANDLE SLEEVE PVC 18 LOCKING DEVICE AISI 304 - DELRIN SEAT MAX USING TEMPERATURE: 80°C

DN 8 10 15 20 25 32 40 50

d 11.6 12.7 14.3 20.7 25.4 31.5 38 50.8

D1 15.8 21 26.6 35 41 52.5

h1 W H T L D2 74.8 30.6 61.2 114.5 31.5 14 74.8 30.6 61.2 114.5 31.5 18 74.8 30.6 61.2 114.5 31.5 22 37.8 81.5 147 39.8 80 27.5 86.2 147 44.4 47 93 34.5 43 109.5 54.3 96.3 178 45.5 49.5 120.1 62.3 101.1 178 50.3 61.5 139.6 78.8 111.6 178 60.8

h2 45.8 45.8 45.8 55.1 60 73.6 78.4 88.9

C 5.7 5.7 5.7 7.5 7.5 8.6 8.6 8.6

P 36 36 36 42 42 50 50 50

M M5 M5 M5 M5 M5 M6 M6 M6

K 15.3 15.3 15.3 16.8 17 29.6 29.6 29.6

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d 0.56 0.56 0.56 0.81 1 1.24 1.5 2

D1 0.62 0.83 1.05 1.38 1.61 2.07

D2 0.55 0.71 0.87 1.08 1.36 1.69 1.95 2.42

h1 1.24 1.24 1.24 1.57 1.75 1.79 1.98 2.39

h2 1.8 1.8 1.8 2.17 2.36 2.9 3.09 3.5

C 0.22 0.22 0.22 0.3 0.3 0.34 0.34 0.34

P 1.42 1.42 1.42 1.65 1.65 1.97 1.97 1.97

M M5 M5 M5 M5 M5 M6 M6 M6

K 0.6 0.6 0.6 0.66 0.67 1.17 1.17 1.17

L 2.94 2.94 2.94 3.15 3.67 4.31 4.73 5.5

T 1.2 1.2 1.2 1.49 1.85 2.14 2.45 3.1

H 2.41 2.41 2.41 3.21 3.39 3.79 3.98 4.39

W 4.51 4.51 4.51 5.79 5.79 7.01 7.01 7.01

Torque (N-m) S 8.8 3/8"-24UNF 8.8 3/8"-24UNF 8.8 3/8"-24UNF 16.1 7/16"-20UNF 16.1 7/16"-20UNF 32.5 9/16"-18UNF 45.5 9/16"-18UNF 52 9/16"-18UNF unit:mm Torque (in-lb) S 77.9 3/8"-24UNF 77.9 3/8"-24UNF 77.9 3/8"-24UNF 142.5 7/16"-20UNF 142.5 7/16"-20UNF 287.6 9/16"-18UNF 402.7 9/16"-18UNF 460.2 9/16"-18UNF unit:in

HIGH PRESSURE BALL VALVE

2012KM3M FEATURES - Full port, 1/2"~2" (DN15~DN50) - W.P. : 3000 WOG (PN200) - W.T. : -20°C~260°C (-4°F~500°F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - ASME B16.34 Wall thickness - NACE MR0175 (option) - Butt weld ends conform to ANSI B16.25 & DIN 3239 part1 MATERIAL ITEM PARTS ASTM A351-CF8M 1 BODY 2 CAP ASTM A351-CF3M ASTM A216-WCB 3 SEAT PEEK / DELRIN 4 BALL ASTM A351-CF8M 5 STEM ASTM A276-316 6 SEAL RTFE 7 THRUST WASHER RTFE / CTFE 8 PACKING 9 GLAND RING AISI 304 10 BELLEVILLE WASHER AISI 301 11 STEM NUT 12 LOCKING WASHER 13 HANDLE AISI 304 14 HANDLE NUT 15 SPRING WASHER 16 BOLT 17 HANDLE SLEEVE PVC 18 LOCKING DEVICE AISI 304 - DELRIN SEAT MAX USING TEMPERATURE: 80°C

Torque (N-M) K S 8.8 15.3 3/8"-24UNF 16.1 16.8 7/16"-20UNF

DN 15

d 14.3

D 21.35

L 74.8

d1 15.8

T 30.6

H 61.2

W 114.5

h1 31.5

h2 45.8

C 5.7

P 36

M M5

20.7

26.65

20.9

37.8

81.5

147

39.8

55.1

7.5

25.4

33.4

26.65

86.2

147

44.4

7.5

7/16"-20UNF

16.1

31.5

42.15 109.5 35.05

54.3

96.3

178

45.5

73.6

8.6

29.6 9/16"-18UNF

32.5

48.25 120.1

40.9

62.3

101.1

178

50.3

78.4

8.6

29.6 9/16"-18UNF

45.5

50.8

60.3

139.6

52.5

78.8

111.6

178

60.8

88.9

8.6

29.6 9/16"-18UNF

N PS 1/2"

d 0.56

D 0.84

L 2.94

d1 0.62

T 1.2

H 2.41

W 4.51

h1 1.24

h2 1.8

C 0.22

P 1.42

M M5

3/4"

0.81

1.05

3.15

0.82

1.49

3.21

5.79

1.57

2.17

0.3

1.65

1.31

3.66

1.05

1.85

3.39

5.79

1.75

2.36

0.3

1.65

52 unit:mm Torque (in-lb) K S 78.2 0.6 3/8"-24UNF 142.7 0.66 7/16"-20UNF 142.7 0.67 7/16"-20UNF

1-1/4" 1.24

1.66

4.31

1.38

2.14

3.79

7.01

1.79

2.9

0.34

1.97

1.17 9/16"-18UNF

287.6

1-1/2"

1.5

1.9

4.73

1.61

2.45

3.98

7.01

1.98

3.09

0.34

1.97

1.17 9/16"-18UNF

402.7

2.37

5.5

2.07

3.1

4.39

7.01

2.39

3.5

0.34

1.97

1.17 9/16"-18UNF

460.2 unit:in

HIGH PRESSURE BALL VALVE

2013KM3M FEATURES - Full port, 1/4"~2" (DN8~DN50) - W.P. : 3000 WOG (PN200) - W.T. : -20°C~260°C (-4°F~500°F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - ASME B16.34 Wall thickness - NACE MR0175 (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 SO7/1 & EN10226 MATERIAL ITEM PARTS ASTM A351-CF8M 1 BODY 2 CAP ASTM A351-CF3M ASTM A216-WCB 3 SEAT PEEK / DELRIN 4 BALL ASTM A351-CF8M 5 STEM ASTM A276-316 6 SEAL RTFE 7 THRUST WASHER RTFE / CTFE 8 PACKING 9 GLAND RING AISI 304 10 BELLEVILLE WASHER AISI 301 11 STEM NUT 12 LOCKING WASHER 13 HANDLE AISI 304 14 HANDLE NUT 15 SPRING WASHER 16 BOLT 17 HANDLE SLEEVE PVC 18 LOCKING DEVICE AISI 304 - DELRIN SEAT MAX USING TEMPERATURE: 80°C

DN 8 10 15 20 25 32 40 50

d 11.6 12.7 14.3 20.7 25.4 31.5 38 50.8

L 74.8 74.8 74.8 80 93 109.5 120.1 139.6

T 30.6 30.6 30.6 37.8 47 54.3 62.3 78.8

H 61.2 61.2 61.2 81.5 86.2 96.3 101.1 111.6

W 114.5 114.5 114.5 147 147 178 178 178

h1 31.5 31.5 31.5 39.8 44.4 45.5 50.3 60.8

h2 45.8 45.8 45.8 55.1 60 73.6 78.4 88.9

C 5.7 5.7 5.7 7.5 7.5 8.6 8.6 8.6

P 36 36 36 42 42 50 50 50

M M5 M5 M5 M5 M5 M6 M6 M6

K 15.3 15.3 15.3 16.8 17 29.6 29.6 29.6

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 9/16"-18UNF 9/16"-18UNF 9/16"-18UNF

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d 0.56 0.56 0.56 0.81 1 1.24 1.5 2

L 2.94 2.94 2.94 3.15 3.66 4.31 4.73 5.5

T 1.2 1.2 1.2 1.49 1.85 2.14 2.45 3.1

H 2.41 2.41 2.41 3.21 3.39 3.79 3.98 4.39

W 4.51 4.51 4.51 5.79 5.79 7.01 7.01 7.01

h1 1.24 1.24 1.24 1.57 1.75 1.79 1.98 2.39

h2 1.8 1.8 1.8 2.17 2.36 2.9 3.09 3.5

C 0.22 0.22 0.22 0.3 0.3 0.34 0.34 0.34

P 1.42 1.42 1.42 1.65 1.65 1.97 1.97 1.97

M M5 M5 M5 M5 M5 M6 M6 M6

K 0.6 0.6 0.6 0.66 0.67 1.17 1.17 1.17

S 3/8"-24UNF 3/8"-24UNF 3/8"-24UNF 7/16"-20UNF 7/16"-20UNF 9/16"-18UNF 9/16"-18UNF 9/16"-18UNF

Torque (N-m) 8.8 8.8 8.8 16.1 16.1 32.5 45.5 52 unit:mm Torque (in-lb) 77.9 77.9 77.9 142.5 142.5 287.6 402.7 460.2 unit:in

2013F60

HIGH PRESSURE BALL VALVE

FEATURES - 1/4"~2" (DN8~DN50) - W.P. : 6000 WOG (PN420) - W.T. : -20°C~260°C (-4°F~500°F) - Forged body - Blow-out proof stem - Live-loading design - NACE MR0175 - API 607 Fire safe design - End connection: Thread end Socket weld Butt weld MATERIAL ITEM PARTS 1 BODY ASTM A182 F316 ASTM A105 2 CAP 3 BALL SEAL DELRIN 4 SEAT DELRIN / PEEK 5 BALL AISI 316 6 STEM 7 THRUST WASHER DELRIN 8 O-RING VITON 9 STEM PACKING CTFE 10 GLAND AISI 304 11 BELLEVILLE WASHER AISI 301 12 STEM NUT 13 HANDLE 14 LOCK WASHER AISI 304 15 STOP PIN 16 BOLT WASHER 17 BOLT 18 HANDLE SLEEVE PVC - DELRIN SEAT MAX USING TEMPERATURE: 80°C

DN 8 10 15 20 25 32 40 50

d (Reduced bore) 9.7 11.6 12.5 15 20 25 32 38

d (Full bore) 11.6 12.5 15 20 25 32 38 50

B 76 76 76 84 98 107 130 146

C 25 25 25 33 33 41 50 56

W 142 142 142 142 162 162 200 200

L 75 75 75 85 95 108 128 156

M 3/8" UNF 3/8" UNF 3/8" UNF 3/8" UNF 7/16" UNF 7/16" UNF 9/16" UNF 9/16" UNF

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d (Reduced bore) 0.38 0.46 0.49 0.59 0.79 0.98 1.26 1.5

d (Full bore) 0.46 0.49 0.59 0.79 0.98 1.26 1.5 1.97

B 2.99 2.99 2.99 3.31 3.86 4.21 5.12 5.7

C 0.98 0.98 0.98 1.3 1.3 1.61 1.97 2.2

W 5.59 5.59 5.59 5.59 6.38 6.38 7.87 7.87

L 2.95 2.95 2.95 3.35 3.74 4.25 5.04 6.14

M 3/8" UNF 3/8" UNF 3/8" UNF 3/8" UNF 7/16" UNF 7/16" UNF 9/16" UNF 9/16" UNF

P 5.54 5.54 5.54 5.54 7.54 7.54 8.68 8.68 unit:mm P 0.22 0.22 0.22 0.22 0.3 0.3 0.34 0.34 unit:in

2052A

1-PC. FLANGED END BALL VALVE

FEATURES - Full port, 1/2"~4" (DN15~DN100) - W.P. : PN10/16/40 CLASS 150 - W.T. : -20°C~200°C (-4°F~392°F) - Wafer type - Investment casting - Blow-out proof stem - Anti-static device (option) - ISO 5211 Mounting pad - ISO 5211 Direct mounting pad - 2052AD (option)

 



MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 RETAINER ASTM A351-CF8M 3 BALL AISI 316 4 ANTI-STATIC DEVICE 5 SEAT 6 SEAL PTFE 7 THRUST WASHER 8 PACKING ASTM A276-316 9 STEM 10 HANDLE AISI 304 11 GLAND NUT 12 STOP PIN PVC 13 HANDLE SLEEVE





 













 





 





15 20 25 32 40 50 65 80 100

15 20 25 32 38 50 65 76 96

36 36 36 36 50 50 70 70 102

M5 M5 M5 M5 M6 M6 M8 M8 M10

36 38 43 51 63 70 107 120 152

150 150 150 156 180 180 282 290 325

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

0.59 0.79 0.98 1.26 1.5 1.97 2.56 2.99 3.78

1.42 1.42 1.42 1.42 1.97 1.97 2.76 2.76 4.02

M5 M5 M5 M5 M6 M6 M8 M8 M10

1.42 1.5 1.69 2.01 2.48 2.76 4.21 4.72 5.98

5.91 5.91 5.91 6.14 7.09 7.09 11.1 11.42 12.8

CLASS 150 H Torque(N-M) 68 5.2 72 7 75 8.3 88.5 12.7 110 38.2 118.5 45.9 140 53.6 152 82.8 168 104.5 H 2.68 2.83 2.95 3.48 4.33 4.67 5.51 5.98 6.61

CLASS 150 Torque(in-lb) 46 62.1 73.6 112.8 338.3 406.2 474 732.9 925.1

PN PN 16-40 PN 16-40 PN 10-16

PN 16/40 H Torque(N-M) 70 5.5 70 7.5 80 8.5 87 12 102 20 108 30 143 50 152 65 168 90 unit:mm PN 16/40 H Torque(in-lb) 2.76 48.68 2.76 66.38 3.15 75.23 3.43 106.21 4.02 177.01 4.25 265.52 5.63 442.54 5.98 575.3 6.61 796.56 unit:in

2021D

1-PC. FLANGED END BALL VALVE

FEATURES - Standard port, 1"~4" (DN25~DN100) - W.P. : CLASS 150 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - ISO 5211 Direct mounting pad - API 607 Fire safe approved - Automation accessories (option) - Wall thickness: ASME B16.34 - Flange dimension: ASME B16.5 - Face to face: ASME B16.10 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 RETAINER 3 BALL ASTM A351-CF8M 4 STEM ASTM A276-316 5 SEAT PTFE 6 SEAL GRAPHITE 7 THRUST WASHER CTFE 8 O-RING VITON 9 PACKING GRAPHITE 10 GLAND RING 11 BELLEVILLE WASHER 12 LOCKING WASHER AISI 304 13 LOCKING PAD 14 STEM NUT 15 HANDLE 16 HANDLE SELLVE PVC

DN 25

d 20

d1 25

L 127

H 80

W 117

ISO 5211 F03/F04

S 9

h1 8

d2 36

d3 42

R1 2.75

R2 2.75

Torque (N-M) 9.8

165

160

F04/F05

10.5

2.75

3.5

20.8

178

117

221

F05/F07

3.5

4.5

29.9

190.5

130

221

F05/F07

15.5

3.5

4.5

37.7

203

134

325

F07/F10

18.5

102

4.5

5.5

48.1

100

229

157

325

F07/F10

102

4.5

5.5

N PS 1"

d 0.79

d1 0.98

L 5

H 3.15

W 4.61

ISO 5211 F03/F04

S 0.35

h1 0.32

d2 1.42

d3 1.65

R1 0.11

R2 0.11

55.9 unit:mm Torque (in-lb) 86.7

1-1/2"

1.18

15.7

6.5

3.54

6.3

F04/F05

0.43

0.41

1.65

1.97

0.11

0.14

184.1

1.5

1.97

7.01

4.61

8.7

F05/F07

0.55

1.97

2.76

0.14

0.18

264.6

2-1/2"

1.97

2.52

7.5

5.12

8.7

F05/F07

0.55

0.61

1.97

2.76

0.14

0.18

333.7

2.52

2.99

7.99

5.28

12.8

F07/F10

0.67

0.73

2.76

4.02

0.18

4.02

425.7

2.99

3.94

9.02

6.18

12.8

F07/F10

0.67

0.79

2.76

4.02

0.18

4.02

494.8 unit:in

2019

2-PC. FLANGED END BALL VALVE

FEATURES - Full port, 1/2"~12" (DN15~DN300) - W.P. : PN16/40 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - ISO 5211 Mounting pad - Flange dimension: DIN 2501 - Face to face: DIN 3202 part1 - F4/F5

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP ASTM A351-CF8M 3 BALL ASTM A276-316 4 STEM PTFE / RTFE 5 SEAT 6 SEAL PTFE 7 PACKING 8 THRUST WASHER SUS 304 CSP 9 C SNAP RING CAST IRON 10 HANDLE 11 STUD AISI 304 12 NUT 13 LOCKING DEVICE ASTM A351-CF8 14 GLAND

DN 15 20 25 32 40 50 65 80 100

L 114.5 121.4 126.7 131.2 141.1 150.7 170.5 181.5 190.8

H 68 70 82 87 138 147 163 173 190

H1 45 48 53 59.5 96 104.5 125.5 135.5 151

H2 33.5 36 42 48 80.5 89.5 108 117.5 133.5

W 130 130 160 160 200 200 328 328 328

PCD 42 42 42 42 50 70 70 102 102

PCD1 50 62 62 62

Torque(N-m) 6 6 15 30 30 50 80 90 120

NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

L 4.51 4.78 4.99 5.17 5.56 5.93 6.71 7.15 7.51

H 2.68 2.76 3.23 3.43 5.43 5.79 6.42 6.81 7.48

H1 1.77 1.89 2.09 2.34 3.78 4.11 4.94 5.33 5.94

H2 1.32 1.42 1.65 1.89 3.17 3.52 4.25 4.63 5.26

W 5.12 5.12 6.3 6.3 7.87 7.87 12.91 12.91 12.91

PCD 1.65 1.65 1.65 1.65 1.97 2.76 2.76 4.02 4.02

PCD1 1.97 2.44 2.44 2.44

Torque(in-lb) 53.1 53.1 132.8 265.5 265.5 442.5 708.1 796.6 1062.1

Weight(kg) 2.5 3.1 4 5.5 7.2 11.5 16.3 21.2 27.6 unit:mm Weight(lb) 5.4 6.8 8.8 12.1 15.9 25.4 35.9 46.7 60.9 unit:in

2020

2-PC. FLANGED END BALL VALVE

FEATURES - Full port, 1/2"~12" (DN15~DN300) - W.P. : CLASS 150/300 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - ISO 5211 Mounting pad - Flange dimension: ASME B16.5 - Face to face: ASME B16.10

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP ASTM A351-CF8M 3 BALL RTFE 4 SEAT 5 SEAL PTFE 6 THRUST WASHER 7 PACKING ASTM A276-316 8 STEM ASTM A351-CF8 9 GLAND ASTM A276-316 10 LOCKING PAD AISI 304 11 GLAND BOLT ASTM A36(A536) 12 HANDLE AISI 304 13 BOLT

DN 15 20 25 32 40 50 65 80 100 NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

L (Class150) 108 117 127 140 165 178 190 203 229

L (Class300) 140 153 165 190 216 241 282 305

L (Class150) 4.25 4.61 5 5.51 6.5 7.01 7.48 7.99 9.02

L (Class300) 5.51 6.02 6.5 7.48 8.5 9.49 11.1 12.01

PCD

Torque (N-M)

73 76 86 91 119 127 136 164 178

130 130 160 160 205 205 325 325 325

42 42 50 50 70 70 70 102 102

11 11 14 14 17 17 17 22 22

17.3 17.3 23.1 20.5 28.4 28.4 28.4 39.3 38.1

24.3 25.5 30.8 31 41.5 41 42.5 56 56

50 50 63.5 63.5 81 81 88 112 112

4 4 10 20 20 40 55 80 120

PCD

Torque (in-lb)

2.87 2.99 3.39 3.58 4.69 5 5.35 6.46 7.01

5.12 5.12 6.3 6.3 8.07 8.07 12.8 12.8 12.8

1.65 1.65 1.97 1.97 2.76 2.76 2.76 4.02 4.02

0.43 0.43 0.55 0.55 0.67 0.67 0.67 0.87 0.87

0.68 0.68 0.91 0.81 1.12 1.12 1.12 1.55 1.5

1 1 1.21 1.2 1.63 1.61 1.67 2.2 2.2

1.97 1.97 2.5 2.5 3.19 3.19 3.46 4.41 4.41

35.4 35.4 88.5 177 177 354 486.8 708.1 1062.1

Weight (kg) (Class150) 1.7 2 3 3.8 6 8.5 13.7 18.2 28 Weight (kg) (Class150) 3.8 4.5 6.6 8.3 13.3 18.7 30.1 40.2 61.7

Weight (kg) (Class300) 2.5 3.5 4.7 9.3 11.7 13.6 26.3 39.3 unit:mm Weight (kg) (Class300) 5.4 7.6 10.4 20.5 25.8 29.9 57.9 86.6 unit:in

2020N

2-PC. FLANGED END BALL VALVE

FEATURES - Full port, 1/2"~12" (DN15~DN300) - W.P. : CLASS 150/300 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - API 607 Fire safe approved - Flange dimension: ASME B16.5 - Face to face: ASME B16.10

D N 15~ D N 50

15 20 25 32 40 50 65 80 100

15 20 25 32 38 50 65 76.5 102

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.01 4.02

MATERIAL ITEM PARTS 1 CAP ASTM A351-CF8M ASTM A216-WCB 2 BODY 3 BALL ASTM A351-CF8M 4 NUT AISI 304 5 BOLT 6 SEAL GRAPHITE 7 SEAT PTFE 8 THRUST WASHER 1 CTFE 9 THRUST WASHER 2 10 THRUST WASHER 3 PTFE 11 PAKCING 1 GRAPHITE 12 PAKCING 2 13 GLAND RING 1 AISI 304 14 GLAND RING 2 15 STEM ASTM A276-316 16 STOPPER AISI 304 17 GLAND ASTM A351-CF8M 18 CIRCLIPS FOR SHAFTS 19 BOLT AISI 304 20 SOCKET SET SCREWS 21 HANDLE 22 BELLEVILLE WASHER AISI 301 23 LOCKING WASHER AISI 304 24 STEM NUT 25 HANDLE SLEEVE PVC

D N 65~ D N 100

L 108 117 127 140.2 165 178 190 203 229

CLASS 150 H 74.5 77.5 90.6 93.5 108 124 155 160 181.6

W 165 165 199 199 248 262 328 328 328

L 140 152 165 178 190 216 241 282 305

CLASS 300 H 74.5 77.5 90.6 93.5 108 124 168 173 195

W 165 165 199 199 248 262 400 400 400

6.3 6.3 8 8 9.5 9.5 17 17 17

42 42 50 50 70 70 102 102 102

M5*0.8 M5*0.8 M6*1 M6*1 M8*1.25 M8*1.25 M10*1.5 M10*1.5 M10*1.5

L 4.25 4.61 5 5.52 6.5 7.01 7.48 7.99 9.02

CLASS 150 H 2.93 3.05 3.57 3.68 4.25 4.88 6.1 6.3 7.15

W 6.5 6.5 7.83 7.83 9.76 10.31 12.91 12.91 12.91

L 5.51 5.98 6.5 7.01 7.48 8.5 9.49 11.1 12.01

CLASS 300 H 2.93 3.05 3.57 3.68 4.25 4.88 6.61 6.61 7.68

W 6.5 6.5 7.83 7.83 9.76 10.31 15.75 15.75 15.75

0.25 0.25 0.31 0.31 0.37 0.37 0.67 0.67 0.67

1.65 1.65 1.97 1.97 2.76 2.76 4.02 4.02 4.02

M5*0.8 M5*0.8 M6*1 M6*1 M8*1.25 M8*1.25 M10*1.5 M10*1.5 M10*1.5

Torque (N-M) 3.4 5.4 6.9 14.7 32 32 40 48 58 unit:mm Torque (in-lb) 30.1 47.8 61.1 130.1 283.2 283.2 354 424.8 513.3 unit:in

2019D

2-PC. FLANGED END BALL VALVE

FEATURES - Full port, 1/2"~4" (DN15~DN100) - W.P. : PN16/40 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 direct mounting pad - API 607 Fire safe approved - ISO 15848 fugitive emission approved (option) - Automation accessories (option) MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL ASTM A351-CF8M 4 STEM ASTM A276-316 5 SEAT PTFE 6 SEAL GRAPHITE 7 THRUST WASHER CTFE 8 PACKING GRAPHITE 9 O-RING VITON 10 HANDLE AISI 304 11 BELLEVILLE WASHER AISI 301 12 STEM NUT 13 LOCKING DEVICE 14 GLAND RING AISI 304 15 LOCKING WASHER 16 BOLT 17 NUT

PN16

PN16-40

PN16

PN16-40

- ABOVE MENTIONED MATERIALS APPLY TO FIRE SAFE DESIGN - ISO 15848 DESIGN SHOULD REPLACE WITH PTFE SEAL & PACKING

W 197 197 197 197 247 247 340 340 340

ISO 5211 F03 \ F04 F03 \ F04 F04 \ F05 F04 \ F05 F05 \ F07 F05 \ F07 F07 \ F10 F07 \ F10 F10 \ F12

DN 15 20 25 32 40 50 65 80 100

d 15 20 24 30 38 50 64 76 100

L 115 120 125 130 140 150 170 180 190

H 86.5 89 93 106 121 129 158 166 189

NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.59 0.79 0.94 1.18 1.5 1.97 2.52 2.99 3.94

L 4.53 4.72 4.92 5.12 5.51 5.91 6.69 7.1 7.48

ISO 5211 W H 3.41 7.76 F03 \ F04 7.76 F03 \ F04 3.5 3.66 7.76 F04 \ F05 4.17 7.76 F04 \ F05 4.76 9.72 F05 \ F07 5.08 9.72 F05 \ F07 6.22 13.39 F07 \ F10 6.54 13.39 F07 \ F10 7.44 13.39 F10 \ F12

S 9 9 11 11 14 14 17 17 22

h1 8.5 8.5 11 11 15 15 22 22 24

d2 h2 26 60 26 62.5 30.5 69 30.5 82 36 91 36 99 47 127 134.5 47 57 160

d3 36 36 42 42 50 50 70 70 102

d1 42 42 50 50 70 70 102 102 125

R1 2.75 2.75 2.75 2.75 3.5 3.5 4.5 4.5 6.5

R2 2.75 2.75 3.5 3.5 4.5 4.5 5.5 5.5 7.5

Torque(N-m) 5.2 8 12.5 12 24.5 32 38 45 55

S 0.35 0.35 0.43 0.43 0.55 0.55 0.67 0.67 0.87

h1 0.33 0.33 0.43 0.43 0.59 0.59 0.87 0.87 0.94

h2 2.36 2.46 2.72 3.23 3.58 3.9 5 5.3 6.3

d2 1.02 1.02 1.2 1.2 1.42 1.42 1.85 1.85 2.24

d3 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76 4.02

d1 1.65 1.65 1.97 1.97 2.76 2.76 4.02 4.02 4.92

R1 0.11 0.11 0.11 0.11 0.14 0.14 0.18 0.18 0.26

R2 0.11 0.11 0.14 0.14 0.18 0.18 0.22 0.22 0.3

Torque(in-lb) 46 70.8 110.6 106.2 216.8 283.2 336.3 398.3 486.8

Weight(kg) 2.2 2.8 3.6 5.3 6.6 9.4 13.8 17.9 23.6 unit:mm Weight(lb) 4.9 6.2 8 11.7 14.6 20.7 30.3 39.5 52 unit:in

2020D

2-PC. FLANGED END BALL VALVE

FEATURES - Full port, 1/2"~10" (DN15~DN250) - W.P. : CLASS 150/300 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device - Locking device - ISO 5211 direct mounting pad - API 607 Fire safe approved - ISO 15848 fugitive emission approved (option) - Automation accessories (option) MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL SOLID: ASTM A351-CF8M / HOLLOW: ASTM A240-316 4 SEAT PTFE / RTFE SEAL 5 GRAPHITE STEM 6 ASTM A276-316 7 THRUST WASHER CTFE O-RING 8 VITON PACKING 9 GRAPHITE GLAND RING 10 AISI 304 11 BELLEVILLE WASHER AISI 301 12 STEM NUT 13 LOCKING WASHER 14 FLAT WASHER 15 HANDLE HEAD 16 STOP PIN AISI 304 17 BOLT 18 STUD 19 NUT 20 STEEL TUBE 21 HANDLE SLEEVE PVC 22 HANDLE AISI 301 23 SOCKET SET SCREW - ABOVE MENTIONED MATERIALS APPLY TO FIRE SAFE DESIGN - ISO 15848 DESIGN SHOULD REPLACE WITH PTFE SEAL & PACKING N DN D N

15 1 5 20 2 0 25 2 5 32 3 2 40 4 0 50 5 0 65 6 5 80 8 0 100 1 00 00 125 1 25 150 1 50 200 2 00 00 250 2 50

15 1 5 20 2 0 24 2 4 30 3 0 38 3 8 50 5 0 64 6 4 76 7 6 98 9 8 125 1 25 150 1 50 200 2 00 250 2 50

NPS N PS

1/2" 1 /2" 3/4" 3 /4" 1"" 1 1-1/4" 1 -1/4 /4" 4" 1-1/2" 1 -1/2 /2" 2" 2"" 2 2-1/2" 2 -1/2 /2" 2" 3"" 3 4"" 4 5"" 5 6"" 6 8"" 8 10" 1 0" 0"

0.59 0 .59 0.79 0 .79 0.94 0 .94 1.18 1 .18 1.5 1 .5 1.97 1 .97 2.52 2 .52 2.99 2 .99 3.86 3 .86 4.92 4 .92 5.91 5 .91 7.87 7 .87 9.84 9 .84

L 108 1 08 117 1 17 127.5 1 27 7.5 140.5 1 40 0.5 165 1 65 178 1 78 190.5 1 90 0.5 203 2 03 229 2 29 356 3 56 394 3 94 457 45 57 533 53 33

CLASS CL LAS LA ASS 150 150 50 H 85 8 5 89.5 89 9.5 94.2 94 4.2 97.9 97 7.9 120.9 1 20 0.9 129.9 1 29 9.9 156.3 1 56 6.3 163.3 1 63 3.3 190.9 1 90 0.9 232 2 32 230 2 30 312 3 12 350 3 50

W W 190 1 90 190 1 90 190 1 90 190 1 90 235 2 35 235 2 35 325 3 25 325 3 25 325 3 25 743 7 43 743 7 43 840 8 40 1040 1 040

L 140 1 40 152 1 52 165 1 65 178 1 78 190 1 90 216 2 16 241 2 41 282 2 82 305 3 05 403 4 03 -

CLASS CL LAS LA ASS 300 300 30 00 H 84.5 84 4.5 94.5 94 4.5 99.5 99 9.5 105 1 05 124.5 1 24 4.5 129 1 29 154.5 1 54 4.5 165.5 1 65 5.5 188 1 88 253 2 53 -

W W 197.5 1 97 7.5 197.5 1 97 7.5 197.5 1 97 7.5 197.5 1 97 7.5 247.5 24 47.5 47 247.5 24 47.5 47 340 3 40 340 3 40 340 3 40 743 7 43 -

D1 D 1

D2 D2

R1 R 1

Torque(N-M) To orrq or q qu ue(N-M -M

42 42 42 42 50 50 50 50 70 70 70 70 102 1 02 102 1 02 125 1 25 125 1 25 125 1 25 -

36 36 36 36 42 42 42 42 50 50 50 50 70 70 70 70 102 102 102 102 102 102 140 140 140 140

2.75 2 .75 2.75 2 .75 2.75 2 .75 2.75 2 .75 3.5 3 .5 3.5 3 .5 4.5 4 .5 4.5 4 .5 5.5 5 .5 5.5 5 .5 5.5 5 .5 8.5 8 .5 8.5 8 .5

2.75 2 .75 2.75 2 .75 3.5 3.5 3.5 3.5 4.5 4.5 4.5 4.5 5.5 5.5 5.5 5.5 6.5 6.5 6.5 6.5 6.5 6.5 -

9 9 11 1 1 11 1 1 14 1 4 14 1 4 17 1 7 17 1 7 22 2 2 27 2 7 27 2 7 36 3 6 36 3 6

L 4.25 4 .2 5 4.61 4 .6 1 5.02 5 .0 02 5.53 5 .5 53 6.5 6. 5 7.01 7 .0 1 7.5 7 .5 5 7.99 7 .9 9 9.02 9 .0 2 14.02 1 4.0 02 15.51 1 5.5 51 17.99 1 7.9 99 20.98 20 0.9 98

CLASS CL LAS LA ASS 150 150 50 H 3.35 3 .35 3.52 3 .52 3.71 3 .71 3.85 3 .85 4.76 4 .76 5.11 5 .11 6.15 6 .15 6.43 6 .43 7.52 7 .52 9.13 9 .13 9.06 9 .06 12.28 1 2.2 28 13.78 1 3.7 78

W W 7.48 7 .48 7.48 7 .48 7.48 7 .48 7.48 7 .48 9.25 9 .25 9.25 9 .25 12.8 1 2.8 12.8 1 2.8 12.8 1 2.8 29.25 29 9.25 29.25 29 9.25 33.07 33 3.07 40.94 40 0.94

L 5.51 5 .51 5.98 5 .98 6.5 6 .5 7.01 7 .01 7.48 7 .48 8.5 8 .5 9.49 9 .49 11.1 1 1.1 12.01 1 2.01 15.87 1 5.87 -

CLASS CL LAS LA ASS 300 300 30 00 H 3.33 3 .33 3.72 3 .72 3.92 3 .92 4.13 4 .13 4.9 4 .9 5.08 5 .08 6.08 6 .08 6.52 6 .52 7.4 7 .4 9.96 9 .96 -

5.2 5 .2 8 12.5 1 2.5 12 1 2 24.5 24 4.5 32 3 2 38 3 8 45 4 5 55 5 5 1 60 160 25 50 250 47 70 470 75 50 750 unni t:t:mm m unit:mm u

W W 7.78 7 .78 7.78 7 .78 7.78 7 .78 7.78 7 .78 9.74 9 .74 9.74 9 .74 13.39 1 3.3 39 13.39 1 3.3 39 13.39 1 3.3 39 29.25 29 9.25 -

D 1 D1

D2 D2

R1 R 1

Torque(in-lb) To orrq or que(inn-lb b) b)

1.65 1 .65 1.65 1 .65 1.97 1 .97 1.97 1 .97 2.76 2 .76 2.76 2 .76 4.02 4 .02 4.02 4 .02 4.92 4 .92 4.92 4 .92 4.92 4 .92 -

1.42 1.42 1.42 1.42 1.65 1.65 1.65 1.65 1.97 1.97 1.97 1.97 2.76 2.76 2.76 2.76 4.02 4.02 4.02 4.02 4.02 4.02 5.51 5.51 5.51 5.51

0.11 0 .11 0.11 0 .11 0.11 0 .11 0.11 0 .11 0.14 0 .14 0.14 0 .14 0.18 0 .18 0.18 0 .18 0.22 0 .22 0.22 0 .22 0.22 0 .22 0.33 0 .33 0.33 0 .33

0.11 0.11 0.11 0.11 0.14 0.14 0.14 0.14 0.18 0.18 0.18 0.18 0.22 0.22 0.22 0.22 0.26 0.26 0.26 0.26 0.26 0.26 -

0.35 0 .35 0.35 0 .35 0.43 0 .43 0.43 0 .43 0.55 0 .55 0.55 0 .55 0.67 0 .67 0.67 0 .67 0.87 0 .87 1.06 1 .06 1.06 1 .06 1.42 1 .42 1.42 1 .42

46 4 6 70.8 70 0.8 110.6 1 10.6 106.2 1 06 6.2 216.8 2 16.8 283.2 28 83.2 83 336.3 33 36.3 36 398.3 39 98.3 98 486.8 48 86.8 86 1416.1 1 41 16.1 22 212.7 2212.7 41 159.8 4159.8 66 638 63 6638 unit:in

2019S

2-PC. FLANGED END BALL VALVE

FEATURES

ECONOMIC PATTERN

- Full port, 1/2"~10" (DN15~DN250) - W.P. : PN16/40 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - TA-Luft approved (option) - ISO 5211 Direct mounting pad - 2019SD (option) - Flange dimension: DIN 2501 - Face to face: DIN 3202 part1 - F4/F5 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP ASTM A351-CF8M 3 BALL PTFE / RTFE 4 SEAT 5 SEAL PTFE 6 THRUST WASHER 7 PACKING ASTM A276-316 8 STEM 9 GLAND NUT AISI 304 10 STOP PIN 11 HANDLE PVC 12 HANDLE SLEEVE 13 STEM NUT AISI 304 14 SPRING WASHER 15 BOLT

DN 15 20 25 32 40 50 65 80 100

d 15 20 25 32 38 50 63 76 100

L 115 120 125 130 140 150 170 180 190

H 86 89 104 109 130 135 145 166 181

H1 57.2 59 73.5 78 100.9 107.4 116.1 139 157

H2 23.7 23.5 29.5 29.5 39.4 39.4 38.6 43 43

S 11.1 11.1 12.7 12.7 19.1 19.1 19.1 19.1 19.1

W 169 169 205.5 205.5 267 267 298 390 390

D1 42 42 50 50 70 70 70 70 70

D2 102 102

M1 M5 M5 M6 M6 M8 M8 M8 M8 M8

M2 M10 M10

NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.59 0.79 0.98 1.26 1.5 1.97 2.48 2.99 3.94

L 4.53 4.72 4.92 5.12 5.51 5.91 6.69 7.09 7.48

H 3.39 3.5 4.09 4.29 5.12 5.31 5.71 6.54 7.13

H1 2.25 2.32 2.89 3.07 3.97 4.23 4.57 5.47 6.18

H2 0.93 0.93 1.16 1.16 1.55 1.55 1.52 1.69 1.69

S 0.44 0.44 0.5 0.5 0.75 0.75 0.75 0.75 0.75

W 6.65 6.65 8.09 8.09 10.51 10.51 11.73 15.35 15.35

D1 1.65 1.65 1.97 1.97 2.76 2.76 2.76 2.76 2.76

D2 4.02 4.02

M1 M5 M5 M6 M6 M8 M8 M8 M8 M8

M2 M10 M10

Torque(N-m) 7.5 7.6 17.5 20 22.9 32.2 42.3 87.2 98.2 unit:mm Torque(in-lb) 66.4 67.3 154.9 177 202.7 285 374.4 771.8 869.2 unit:in

2-PC. FLANGED END BALL VALVE

2020S

FEATURES

ECONOMIC PATTERN

- Full port, 1/2"~8" (DN15~DN200) - W.P. : CLASS 150/300 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - TA-Luft approved (option) - Flange dimension: ASME B16.5 - Face to face: ASME B16.10 MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP ASTM A351-CF8M 3 BALL PTFE / RTFE 4 SEAT 5 SEAL PTFE 6 THRUST WASHER 7 PACKING ASTM A276-316 8 STEM 9 GLAND NUT AISI 304 10 STOP PIN 11 HANDLE PVC 12 HANDLE SLEEVE 13 STEM NUT AISI 304 14 SPRING WASHER 15 BOLT

15 20 25 32 40 50 65 80 100

15 20 25 32 38 50 65 80 100

86 89 103 103 130 135 147 166 181

57.2 60 73.5 78.5 102.9 110.4 122 142 157

23.7 23.5 29 29 39.4 39.4 38.6 43 43

11.11 11.1 12.7 12.7 19.05 19.05 19.05 19.05 19.05

169 169 205.5 205.5 267 267 289 390 390

42 42 50 50 70 70 70 70 70

102 102

M5 M5 M6 M6 M8 M8 M8 M8 M8

M10 M10

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

3.39 3.5 4.06 4.06 5.12 5.31 5.79 6.54 7.13

2.25 2.36 2.89 3.09 4.05 4.35 4.8 5.59 6.18

0.93 0.93 1.14 1.14 1.55 1.55 1.52 1.69 1.69

0.44 0.44 0.5 0.5 0.75 0.75 0.75 0.75 0.75

6.65 6.65 8.09 8.09 10.51 10.51 11.38 15.35 15.35

1.65 1.65 1.97 1.97 2.76 2.76 2.76 2.76 2.76

4.02 4.02

M5 M5 M6 M6 M8 M8 M8 M8 M8

M10 M10

CLASS 150 L Torque (N-M) 108 3.8 117 5.5 127 6.5 140 9 165 25 178 38 190 45 203 61 228.5 80

CLASS 300 L Torque (N-M) 140 7.5 152 7.6 165 17.5 178 20 190 22.9 216 32.2 241 42.3 282 87.2 305 98.2 unit:mm CLASS 150 CLASS 300 L L Torque (in-lb) Torque (in-lb) 4.25 5.51 33.6 66.4 4.61 5.98 48.7 67.3 5 6.5 57.5 154.9 5.51 7.01 79.7 177 6.5 7.48 221.3 202.7 7.01 8.5 336.3 285 7.48 9.49 398.3 374.4 7.99 11.1 539.9 771.8 9 12.01 708.1 869.1 unit:in

2020K

2-PC. FLANGED END BALL VALVE

FEATURES - Full port, 1/2"~8" (DN15~DN200) - W.P. : 10K/20K - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device - Locking device - ISO 5211 Mounting pad - Flagne dimension: JIS B2220 - Face to face: JIS B2002 MATERIAL

ITEM PARTS 1 BODY 2 CAP 3 BALL 4 STEM 5 BALL SEAT 6 BODY SEAL 7 THRUST WASHER A 8 THRUST WASHER B 9 PACKING A 10 PACKING B 11 GLAND 12 BRACKET 13 STOPPER 14 BOLT 15 BOLT 16 CIRCLIPS FOR SHAFTS 17 NUT 18 STUD 19 HANDLE 20 SOCKET SET SCREWS

15 20 25 32 40 50 65 80 100

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

0.59 0.79 0.98 1.26 1.57 1.97 2.56 3.15 3.94

SCS14

SCS13 SUS 316 RTFE PTFE

SUS 304

SCW 410 SUS 304

JIS 10K L 110 120 130 140 165 180 190 200 230

JIS 20K L 140 152 165 178 190 216 241 283 305

77 80 90 98.5 129 136 159 173.5 196

130 130 163 163 203 203 203 327 327

42 42 50 50 70 70 70 102 102

11 11 14 14 17 17 17 22 22

JIS 10K L 4.33 4.72 5.12 5.51 6.5 7.09 7.48 7.87 9.06

JIS 20K L 5.51 5.98 6.5 7.01 7.5 8.5 9.49 11.14 12.01

3.03 3.15 3.54 3.88 5.08 5.35 6.26 6.83 7.72

5.12 5.12 6.42 6.42 7.99 7.99 7.99 12.87 12.87

1.65 1.65 1.97 1.97 2.76 2.76 2.76 4.02 4.02

0.43 0.43 0.55 0.55 0.67 0.67 0.67 0.87 0.87

Ma 1/4"-20UNC 1/4"-20UNC 1/4"-20UNC 1/4"-20UNC 5/16"-18UNC 5/16"-18UNC 5/16"-18UNC 3/8"-16UNC 3/8"-16UNC unit:mm Ma 1/4"-20UNC 1/4"-20UNC 1/4"-20UNC 1/4"-20UNC 5/16"-18UNC 5/16"-18UNC 5/16"-18UNC 3/8"-16UNC 3/8"-16UNC unit:in

2010

3-PC. FLANGED END BALL VALVE

FEATURES - Full port, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Flange End W.P. : PN40 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device (option) - Locking device - ISO 5211 Mounting pad - 2010M (option) - ISO 5211 Direct mounting pad - 2010D (option) - Flange dimension: DIN 2501 - PN40 - Face to face: DIN 3202 - F1 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL PARTS BODY ASTM A351-CF8M ASTM A216-WCB CAP BALL ASTM A351-CF8M STEM ASTM A276-316 GLAND NUT AISI 304 SEAT PTFE / RTFE SEAL PACKING PTFE THRUST WASHER SPRING WASHER STEM NUT BOLT BOLT NUT AISI 304 SPRING WASHER HANDLE LOCKING DEVICE HANDLE SLEEVE PVC

DN 15 20 25 32 40 50 65 80 100

d 15 20 25 32 38 50 65 80 100

L 130 150 160 180 200 230 290 310 350

T 24 28 35 45 55 66 86 100 125

H 83 92 86 91 112 115 172 188 207

W 152 152 182 182 214 214 314 314 339

C 5 6.5 8 8 9 9 12 12 12

K 10.5 13.5 15.5 15.5 17.5 17.5 33 33 42

K1 16.2 20.7 24.7 21.7 26.7 26.7 42.2 40.2 56

NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15 3.94

L 5.12 5.91 6.3 7.09 7.87 9.06 11.42 12.2 13.78

T 0.94 1.1 1.38 1.77 2.17 2.6 3.39 3.94 4.92

T 3.27 3.62 3.39 3.58 4.41 4.53 6.77 7.4 8.15

W 5.98 5.98 7.17 7.17 8.43 8.43 12.36 12.36 13.35

C 0.2 0.26 0.31 0.31 0.35 0.35 0.47 0.47 0.47

K 0.41 0.53 0.61 0.61 0.69 0.69 1.3 1.3 1.65

K1 0.64 0.81 0.97 0.85 1.05 1.05 1.66 1.58 2.2

S 5/16"W 3/8"W 7/16"W 7/16"W 1/2"W 1/2"W 3/4"W 3/4"W 1"W unit:mm S 5/16"W 3/8"W 7/16"W 7/16"W 1/2"W 1/2"W 3/4"W 3/4"W 1"W unit:in

2019D-MS 2-PC. FLANGED END BALL VALVE 2020D-MS

FEATURES

METAL SEAT

- Full port, 1-1/2"~6" (DN40~DN150) - W.P. : PN10/16/25/40 CLASS 150/300/600 - W.T. : -20째C~500째C (-4째F~1022째F) - Investment casting - Blow-out proof stem - Anti-static device - ISO 5211 Direct mounting pad - Metal seat - Flange dimension: ASME B16.5 CLASS 150/300/600 EN 1092-1 - Face to face: ASME B16.10 CLASS 150/300/600 DIN 2501 ITEM

MATERIAL

PARTS

1 BODY ASTM A351-CF8M 2 CAP AISI 316 3 SPRING GRAPHITE 4 SEAT SEAL AISI 316+Solder Stellite #6 5 METAL SEAT AISI 316+Hard Chrome Plated 6 BALL AISI 316 7 STEM GRAPHITE+AISI 316 8 BODY SEAL GRAPHITE+PTFE 9 THRUST WASHER VITON 10 O-RING GRAPHITE+PTFE 11 STEM PACKING PTFE 12 GLAND WASHER 13 GLAND AISI 304 14 STOP PLATE 15 SNAP RING FCD45 16 HANDLE AISI 304 17 BOLT ASTM A194-8 18 NUT ASTM A193-B8 19 STUD VITON 20 O-RING

CLASS 150 ONLY, OTHER PRESSURE RATING PLEASE CONTACT US.

DN 40 50 65 80 100 125 150

d 38.1 50.04 62.99 80.01 98.04 124.97 151.89

B 73.15 91.95 104.65 127 157.23 185.67 215.90

C 98.55 120.65 139.7 152.4 190.5 215.9 241.3

D 127 152.4 177.8 190.5 228.6 254 279.4

F 1.52 1.52 1.52 1.52 1.52 1.52 1.52

H 16 16 19.05 24.13 24.13 29.97 29.97

L 165.1 178.05 189.99 202.95 229.11 356.11 393.95

S 13.97 13.97 17.02 22.1 22.1 26.92 26.92

S1 50.04 50.04 70.1 102.11 102.11 124.97 124.97

S2 70.1 70.1 102.11 124.97 124.97 139.95 139.95

T 14.22 15.75 17.53 19.05 23.88 23.88 25.4

Q1 8.13 8.13 9.91 11.94 11.94 13.97 13.97

Q2 9.91 9.91 11.94 13.97 13.97 16 16

NPS 1-1/2" 2" 2-1/2" 3" 4" 5" 6"

d 1.5 1.97 2.48 3.15 3.86 4.92 5.98

B 2.88 3.62 4.12 5 6.19 7.31 8.5

C 3.88 4.75 5.5 6 7.5 8.5 9.5

D 5 6 7 7.5 9 10 11

F 0.06 0.06 0.06 0.06 0.06 0.06 0.06

H 0.63 0.63 0.75 0.95 0.95 1.18 1.18

L 6.5 7.01 7.48 7.99 9.02 14.02 15.51

S 0.55 0.55 0.67 0.87 0.87 1.06 1.06

S1 1.97 1.97 2.76 4.02 4.02 4.92 4.92

S2 2.76 2.76 4.02 4.92 4.92 5.51 5.51

T 0.56 0.62 0.69 0.75 0.94 0.94 1

Q1 0.32 0.32 0.39 0.47 0.47 0.55 0.55

Q2 0.39 0.39 0.47 0.55 0.55 0.63 0.63

M N 15.75 4 19.05 4 19.05 4 19.05 4 19.05 8 22.35 8 22.35 8 unit:mm M N 0.62 4 0.75 4 0.75 4 0.75 4 0.75 8 0.88 8 0.88 8 unit:in

FLANGED END TRUNNION BALL VALVE

2063

FEATURES - Full port, 2"~20" (DN50~DN500) - W.P. : PN 16/40 CLASS 150/300/600/900 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Anti-static device - ISO 5211 Direct mounting pad - Flange dimension: ASME B16.5 CLASS 150/300/600 EN 1092-1 - Face to face: ASME B16.10 CLASS 150/300/600 DIN 2501 MATERIAL PARTS ITEM 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 CAP 3 BALL ASTM A105+ENP ASTM A182-F316 4 STEM ASTM A182-F6a 5 SEAT RETAINER ASTM A105+ENP SS 316 6 SEAT RING RTFE 7 O-RING VITON 8 FIRE SAFE RING KNIT-GRAPHITE 9 SPRING INCONEL X 750 10 GASKET SS 316+GRAPHITE ASTM A193-B8M ASTM A193-B7 11 STUD ASTM A194-8M ASTM A194-2H 12 HEX NUT ASTM A182-F316 ASTM A182-F6a 13 DOWN STEM 14 INJECTION 316 AISI 1025+Zn 15 VENT VALVE 16 GEAR BOX

CLASS 150/300 ONLY, OTHER PRESSURE RATING PLEASE CONTACT US. DN

100 150 200 250 300 350 400 450 500

100 150 201 252 303 334 385 436 487

NPS

4" 6" 8" 10" 12" 14" 16" 18" 20"

3.94 5.91 7.91 9.92 11.93 13.15 15.16 17.17 19.17

L 394 457 533 610 686 762 864 914

D 280 345 405 485 535 595 635 700

C 241.3 298.5 362 431.8 476.3 539.8 577.9 635

CLASS 150 G B 215.9 23.9 269.9 27 323.8 28.6 381 30.2 412.8 33.4 469.9 35 533.4 38.1 584.2 41.3

f 2 2 2 2 2 2 2 2

N 8 8 12 12 12 16 16 20

M 22 22 25.4 25.4 28.6 28.6 32 32

L 305 403 502 568 648 762 838 914 991

D 255 320 380 445 520 585 650 710 775

C 200 269.9 330.2 387.4 450.8 514.4 571.5 628.6 685.8

CLASS 300 G B 157.2 30.2 215.9 35 269.9 39.7 323.8 46.1 381 49.3 412.8 52.4 469.9 55.6 533.4 58.8 584.2 62

f 2 2 2 2 2 2 2 2 2

N 8 12 12 16 16 20 20 24 24

L 15.51 17.99 20.98 24.02 27.01 30 34.02 35.98

D 11.02 13.58 15.94 19.09 21.06 23.43 25 27.56

C 9.5 11.75 14.25 17 18.75 21.25 22.75 25

CLASS 150 G B 8.5 0.94 10.63 1.06 12.75 1.13 15 1.19 16.25 1.31 18.5 1.38 21 1.5 23 1.63

f 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08

N 8 8 12 12 12 16 16 20

M 0.87 0.87 1 1 1.13 1.13 1.26 1.26

L 12.01 15.87 19.76 22.36 25.51 30 32.99 35.98 39.02

D 10.04 12.6 14.96 17.52 20.47 23.03 25.59 27.95 30.51

C 7.87 10.63 13 15.25 17.75 20.25 22.5 24.75 27

CLASS 300 G B 6.19 1.19 8.5 1.38 10.63 1.56 12.75 1.81 15 1.94 16.25 2.06 18.5 2.19 21 2.31 23 2.44

M 22 22 25.4 28 32 32 35 35 35 unit:mm

f 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08

N 8 12 12 16 16 20 20 24 24

M 0.87 0.87 1 1.1 1.26 1.26 1.38 1.38 1.38 unit:in

2057N

3-WAY SCREWED END BALL VALVE

FEATURES - L port / T port, 1/4"~2" (DN8~DN50) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - Anti-static device (option) - ISO 5211 Mounting pad - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PARTS BODY CAP-A CAP-B BALL SEAT STEM SEAL-A THRUST WASHER PACKING GLAND NUT SPRING WASHER STEM NUT LOCKING DEVICE HANDLE HANDLE SLEEVE STOP PIN SEAL-B

MATERIAL ASTM A351-CF8M PTFE AISI 316 PTFE

AISI 304

PVC AISI 304 PTFE

DN 15 20 25 40 50 65 80 100

d 11.6 12.5 12.5 16 20 25 32 38

D 25.5 25.5 25.5 32 38.5 48.5 58.5 69.5

L 76 76 76 86 99 117 124 148

B 37.3 37.3 37.3 44 49 57 61.3 74.3

F 58.5 58.5 58.5 72 81.5 94.5 104 125

H 67 67 67 77 83 88 116 124

W 153 153 153 153 183 183 246 246

E 42 42 42 42 50 50 70 70

M M5 M5 M5 M5 M6 M6 M8 M8

H1 29.1 29.1 29.1 38.5 43 47.8 55.7 64.5

H2 18 18 18 20 23 23 34 34

A 8 8 8 8 9.5 9.5 12.5 12.5

Torque (N-M) 7.9 8.1 11.3 14.5 20 23.8 34.8 58.1

NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4"

d 0.46 0.49 0.49 0.63 0.79 0.98 1.26 1.5

D 1 1 1 1.26 1.52 1.91 2.3 2.74

L 2.99 2.99 2.99 3.39 3.9 4.61 4.88 5.83

B 1.47 1.47 1.47 1.73 1.93 2.24 2.41 2.93

F 2.3 2.3 2.3 2.83 3.21 3.72 4.09 4.92

H 2.64 2.64 2.64 3.03 3.27 3.46 4.57 4.88

W 6.02 6.02 6.02 6.02 7.2 7.2 9.69 9.69

E 1.65 1.65 1.65 1.65 1.97 1.97 2.76 2.76

M M5 M5 M5 M5 M6 M6 M8 M8

H1 1.15 1.15 1.15 1.52 1.69 1.88 2.19 2.54

H2 0.71 0.71 0.71 0.79 0.91 0.91 1.34 1.34

A 0.31 0.31 0.31 0.31 0.37 0.37 0.49 0.49

Torque (in-lb) 70.1 72 100.3 128.5 177.2 210.3 307.7 514

unit:mm

unit:in

2057D

3-WAY SCREWED END BALL VALVE

FEATURES - L port / T port, 1/4"~2" (DN8~DN50) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - Anti-static device (option) - ISO 5211 Direct mounting pad - Automation accessories (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PARTS BODY CAP-A BALL SEAT STEM SEAL-A THRUST WASHER O-RING PACKING GLAND BELLEVILLE WASHER STEM NUT LOCKING WASHER HANDLE WASHER LOCKING DEVICE HANDLE HANDLE SLEEVE CAP-B SEAL-B STOP PIN

MATERIAL ASTM A351-CF8M PTFE AISI 316 PTFE PEEK+PTFE VITON PTFE

AISI 304

PVC ASTM A351-CF8M PTFE AISI 304

DN 8 10 15 20 25 32 40 50

d 11.6 12.5 12.5 16 20 25 32 38

L 76 76 76 86 99 117 124 148

L1 58.5 58.5 58.5 72 81.5 94.5 104 125

H 73 73 73 76 87 93 110 119

W 123 123 123 123 153 153 183 183

S 36 36 36 36 42 42 50 50

S1 42 42 42 42 50 50 70 70

H1 9 9 9 9 11 11 14 14

E 9 9 9 9 11 11 14 14

Ra 3 3 3 3 3 3 3.5 3.5

Rb 3 3 3 3 3.5 3.5 4.5 4.5

Torque (N-M) 10 10 10 15 22 30 47 58

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

d 0.46 0.49 0.49 0.63 0.79 0.98 1.26 1.5

L 2.99 2.99 2.99 3.39 3.9 4.61 4.88 5.83

L1 2.3 2.3 2.3 2.83 3.21 3.72 4.09 4.92

H 2.87 2.87 2.87 2.99 3.43 3.66 4.33 4.69

W 4.84 4.84 4.84 4.84 6.02 6.02 7.2 7.2

S 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97

S1 1.65 1.65 1.65 1.65 1.97 1.97 2.76 2.76

H1 0.35 0.35 0.35 0.35 0.43 0.43 0.55 0.55

E 0.35 0.35 0.35 0.35 0.43 0.43 0.55 0.55

Ra 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14

Rb 0.12 0.12 0.12 0.12 0.14 0.14 0.18 0.18

Torque (in-lb) 88.5 88.5 88.5 132.8 194.7 265.5 416 513.3

unit:mm

unit:in

3-WAY SCREWED END SAMPLING VALVE

2058S

FEATURES - Reduced port, 1/4"~3" (DN8~DN80) - W.P. : 1000 WOG (PN63) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - Locking device - Anti-static device (option) - Tapped & drilled mounting pad (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PARTS BODY CAP SEAT BALL STEM SEAL THRUST WASHER GLAND NUT HANDLE HANDLE WASHER WASHER HANDLE NUT HANDLE SLEEVE PACKING LOCKING DEVICE

MATERIAL ASTM A351-CF8M PTFE ASTM A351-CF8M AISI 316 PTFE

AISI 304

PVC PTFE AISI 304

DN 8 10 15 20 25 32 40 50 80

d 11 11 12.5 16 20 25.4 31.8 38.1 65

A 10.9 10.9 10.9 11.4 11.4 23.7 23.7 23.7 23.5

B 5.9 5.9 5.9 6.4 6.4 8.2 8.2 8.2 8

C 12 12 12 12 12 15 15 15 20

D 9 9 9 9 9 11 11 11 14

W 133.4 133.4 133.4 133.4 133.4 178.5 178.5 178.5 265

H 62.7 62.7 64.7 78.7 71.2 90.2 93.7 98.2 138

F 29 29 34.5 39.7 46 51.7 61 71.4 94.7

L 57.2 57.2 66 85.8 88.5 103.4 111.1 136.4 182

M 36 36 36 36 42 50 50 50 70

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3"

d 0.43 0.43 0.49 0.63 0.79 1 1.25 1.5 2.56

A 0.43 0.43 0.43 0.45 0.45 0.93 0.93 0.93 0.93

B 0.23 0.23 0.23 0.25 0.25 0.32 0.32 0.32 0.31

C 0.47 0.47 0.47 0.47 0.47 0.59 0.59 0.59 0.79

D 0.35 0.35 0.35 0.35 0.35 0.43 0.43 0.43 0.55

W 5.25 5.25 5.25 5.25 5.25 7.03 7.03 7.03 10.43

H 2.47 2.47 2.55 3.1 2.8 3.55 3.69 3.87 5.43

F 1.14 1.14 1.36 1.56 1.81 2.04 2.4 2.81 3.73

L 2.25 2.25 2.6 3.38 3.48 4.07 4.37 5.37 7.17

M 1.42 1.42 1.42 1.42 1.65 1.97 1.97 1.97 2.76

N M5*0.8 M5*0.8 M5*0.8 M5*0.8 M5*0.8 M6*1.0 M6*1.0 M6*1.0 M8*1.25 unit:mm N M5*0.8 M5*0.8 M5*0.8 M5*0.8 M5*0.8 M6*1.0 M6*1.0 M6*1.0 M8*1.25 unit:in

3/4-WAY FLANGED END BALL VALVE

2059

FEATURES - L port / T port, 1/2"~6" (DN15~DN150) - W.P. : PN16/40 CLASS 150/300 JIS 10k - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Blow-out proof stem - ISO 5211 Mounting pad

ITEM PARTS 1 BODY 2 CAP 3 BALL & STEM 4 SEAT 5 SEAL 6 O-RING 7 GASKET 8 PACKING 9 GLAND RING 10 SPRING WASHER 11 CAP-C 12 HANDLE HEAD 13 HANDLE SLEEVE 14 HANDLE 15 HANDLE BOLT 16 SLEEVE 17 CAP-B BOLT 18 CAP-B 19 BOLT 20 STOP PIN 21 CAP-A BOLT 22 CAP-A 23 LOCKING WASHER 24 HANDLE WASHER 25 STEM NUT

15 20 25 32 40 50 65 80 100 150

15 20 25 32 40 50 65 76 96 148

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 6"

0.59 0.79 0.98 1.26 1.57 1.97 2.56 2.99 3.78 5.83

MATERIAL ASTM A351-CF8M ASTM A351-CF8 PTFE VITON PTFE AISI 304 ASTM A351-CF8M ASTM A351-CF8 ASTM A351-CF8 PVC AISI 304 PTFE AISI 304 ASTM A351-CF8M ASTM A351-CF8 AISI 304 ASTM A351-CF8M ASTM A351-CF8 AISI 304

CLASS 150 L 148 153 168 221 221 254 300 305 369 480

CLASS 300 L 160 165 180 221 221 254 300 305 369 495

PN 16/40 L 160 165 180 234 234 273 300 305 369 480

JIS 10K L 160 165 180 221 221 254 300 305 369 480

80 84 96 171 171 176 198 216 236 329

9 9 11 19 19 19 24 24 24 38

123 123 153 403 403 403 504 504 504 800

CLASS 150 L 5.83 6.02 6.61 8.7 8.7 10 11.81 12.01 14.53 18.9

CLASS 300 L 6.3 6.50 7.09 8.70 8.70 10 11.81 12.01 14.53 19.49

PN 16/40 L 6.3 6.5 7.09 9.21 9.21 10.75 11.81 12.01 14.53 18.9

JIS 10K L 6.3 6.5 7.09 8.7 8.7 10 11.81 12.01 14.53 18.9

3.15 3.31 3.78 6.73 6.73 6.93 7.8 8.5 9.29 12.95

0.35 0.35 0.43 0.75 0.75 0.75 0.94 0.94 0.94 1.5

4.84 4.84 6.02 15.87 15.87 15.87 19.84 19.84 19.84 31.5

Torque (N-M) 22.9 27.3 31.2 39 39 83.2 91 187.2 234 442 unit:mm Torque (in-lb) 202.7 241.6 276.1 345.2 345.2 736.4 805.4 1656.9 2071.1 3912 unit:in

2028

SCREWED END GLOBE VALVE

FEATURES - 1/4"~2" (DN8~DN50) - W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Rising stem - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226

ITEM 1 2 3 4 5 6 7 8 9 10 11 12

PARTS BODY BONNET DISC SEAL WASHER PACKING GLAND RING CAP NUT STEM HANDLE NAMEPLATE STEM NUT

MATERIAL ASTM A351-CF8M PTFE AISI 304 PTFE AISI 304 AISI 316 ALUMINNUM AISI 304

DN 15 20 25 40 50 65 80 100

L 52 52 52 66 76 86 94 118

H 105.5 105.5 107 116 129.2 153.5 157 172

W 70 70 70 80 80 90 100 100

A 13.6 13.6 13.6 17.6 22.6 29.5 30.5 42.5

Weight (kg) 0.3 0.3 0.3 0.5 0.7 1 1.3 1.8

N PS 1/2 " 3/4 " 1" 1-1/2 " 2" 2-1/2 " 3" 4"

L 2.05 2.05 2.05 2.6 2.99 3.39 3.7 4.65

H 4.15 4.15 4.21 4.57 5.09 6.04 6.18 6.77

W 2.76 2.76 2.76 3.15 3.15 3.54 3.94 3.94

A 0.54 0.54 0.54 0.69 0.89 1.16 1.2 1.67

Weight (lb) 0.7 0.7 0.7 1 1.5 2.2 2.8 4

unit:mm

unit:in

2029

SCREWED END GATE VALVE

FEATURES - 1/4"~3" (DN8~DN80) - W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Non-rising stem - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226

ITEM 1 2 3 4 5 6 7 8 9 10 11 12

PARTS BODY DISC BONNET SEAL GASKET PACKING GLAND RING CAP NUT STEM HANDLE NAMEPLATE NUT

MATERIAL ASTM A351-CF8M PTFE AISI 304 PTFE AISI 304 ASTM A351-CF8M AISI 316 ALUMINUM AISI 304

DN 15 20 25 32 40 50 65 80

d 15 20 25 32 38 50 65 80

L 55 60 65 75 85 95 116 130

H 101 108 118 132 149 175 213 241

W 70 70 80 80 90 100 140 140

Weight (kg) 0.4 0.5 0.7 1 1.4 2.1 5.8 8.8

N PS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15

L 2.17 2.36 2.56 2.95 3.35 3.74 4.57 5.12

H 3.98 4 4.65 5.2 5.87 6.89 8.39 9.49

W 2.76 2.76 3.15 3.15 3.54 3.94 3.94 5.51

Weight (lb) 1 1.2 1.5 2.2 3.1 5 12.8 19.4

unit:mm

unit:in

SCREWED END SWING CHECK VALVE

2030

FEATURES - 1/2"~3" (DN15~DN80) - W.P. : 200 WOG - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Socket weld (option) - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 IISO7/1 & EN10226

ITEM 1 2 3 4 5 6 7

PARTS BODY CAP SEAL PLUG DISC GASKET BOLT

MATERIAL ASTM A351-CF8M PTFE AISI 316 ASTM A351-CF8M PTFE AISI 304

DN 15 20 25 32 40 50 65 80

L 65 80 89 105 120 139 181 200

H 44 52 62 67 79 80 96 104

A 46.5 52 56 65 75 84 108 137

Weight (kg) 0.4 0.4 0.7 0.9 1.5 2.2 5.3 7.7

N PS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

L 2.56 3.15 3.5 4.13 4.72 5.47 7.13 7.87

H 1.73 2.05 2.44 2.64 3.11 3.15 3.78 4.09

A 1.83 2.05 2.2 2.56 2.95 3.31 4.25 5.39

We ight (lb) 0.8 0.9 1.4 2 3.3 4.7 11.6 17

unit:mm

unit:in

2053

FLANGED END GLOBE VALVE

FEATURES - 1/2"~12" (DN15~DN300) - W.P. : PN16 CLASS 150/300/600 JIS 10K - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Rising stem

ITEM 1 2 3 4 5

PARTS BODY DISC DISC COVER STEM SEAL

BONNET

MATERIAL ASTM A351-CF8M/ ASTM A351-CF8/ 1.4308 1.4408 AISI 304 AISI 316 PTFE/304+GRAPHITE ASTM A351-CF8M/ ASTM A351-CF8/ 1.4308 1.4408 PTFE

7 PACKING 8 BONNET BOLT AISI 304 9 HINGE PIN 10 SLEEVE PTFE 11 GLAND ASTM A351-CF8/1.4308 12 NUT AISI 304 13 EYE BOLT 14 YOKE SLEEVE BRONZE 15 NAME PLATE AISI 304 16 NUT 17 HANDWHEEL FCD 400 18 SPRING WASHER AISI 304 * 8” UP GASKET: 304 + GRAPHITE

15 20 25 32 40 50 65 80 100 125 150 200 250 300

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12"

0.59 0.79 0.98 1.26 1.57 1.97 2.56 3.15 3.94 4.92 5.91 7.87 9.84 11.81

L 108 117 127 140 165 203 216 241 292 256 406 495 622 698

C L AS S 1 5 0 H 178 181 200 243 245 258 310 325 390 472 531 669 824 950

W 140 140 140 160 160 200 200 250 250 300 350 350 500 500

L 152 178 203 229 267 292 318 356 400 445 559 622 -

CLASS 300 H 186 186 187 236 289 297 343 398 487 558 665 800 -

W 140 140 140 140 250 250 300 300 450 450 500 500 -

L 130 150 160 180 200 230 290 310 350 400 480 600 730 850

PN 16 H 178 181 200 243 245 258 310 325 390 472 531 669 824 950

L 4.25 4.61 5 5.51 6.5 7.99 8.5 9.49 11.5 10.08 15.98 19.49 24.49 27.48

C L AS S 1 5 0 H 7.01 7.13 7.87 9.57 9.65 10 . 1 6 12.2 12.8 15 . 3 5 18 . 5 8 20 . 9 1 26 . 3 4 32 . 4 4 37.4

W 5.51 5.51 5.51 6.3 6.3 7.87 7.87 9.84 9.84 11.81 13.78 13.78 19.69 19.69

L 5.98 7.01 7.99 9.02 10.51 11.5 12.52 14.02 15.75 17.52 22.01 24.49 -

CLASS 300 H 7.32 7.32 7.36 9.29 11.38 11.69 13.5 15.67 19.17 21.97 26.18 31.5 -

W 5.51 5.51 5.51 5.51 9.84 9.84 11.81 11.81 17.72 17.72 19.69 19.69 -

L 5.12 5.91 6.3 7.09 7.87 9.06 11.42 12.2 13.78 15.75 18.9 23.62 28.74 33.46

PN 16 H 7.01 7.13 7.87 9.57 9.65 10.16 12.2 12.8 15.35 18.58 20.91 26.34 32.44 37.4

W 140 140 140 160 160 200 200 250 250 300 350 350 500 500 unit:mm W 5.51 5.51 5.51 6.3 6.3 7.87 7.87 9.84 9.84 11.81 13.78 13.78 19.69 19.69 unit:in

2054

FLANGED END GATE VALVE

FEATURES - 1/2"~24" (DN15~DN600) - W.P. : PN16 CLASS 150/300/600 - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Rising stem

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M / 1.4408 2 DISC 3 BONNET BOLT AISI 304 4 BONNET NUT 5 BONNET ASTM A351-CF8M / 1.4408 6 HINGE PIN AISI 304 7 EYE BOLT 8 GLAND ASTM A351-CF8 / 1.4308 9 EYE NUT AISI 304 10 HAND WHEEL FCD 11 NUT BRONZE 12 STEM AISI 316 13 NAME PLATE AISI 304 14 SPRING BRONZE 15 YOKE SLEEVE 16 SPRING WASHER AISI 304 17 GLAND PACKING PTFE 18 PACKING 19 SEAL PTFE / 304+GRAPHITE * 5” UP GASKET: 304 + GRAPHITE

15 20 25 32 40 50 65 80 100 125 150 200 250 300

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12"

0.59 0.79 0.98 1.26 1.57 1.97 2.56 3.15 3.94 4.92 5.91 7.87 9.84 11.81

L 108 117 127 140 165 178 190 203 229 254 267 292 330 356

CLASS 150 H 182 195 237 294 294 335 393 467 549 630 743 910 1097 1285

W 120 120 120 200 200 200 200 250 250 300 300 350 400 400

L 140 152 165 190 216 241 283 305 381 403 419 457 502

CLASS 300 H 197 211 232 283 353 404 470 560 626 753 968 1117 1380

W 120 120 120 250 250 250 250 300 300 350 400 400 500

L 115 120 125 130 140 150 170 180 190 200 210 230 250 270

P N 16 H 182 195 237 294 294 335 39 467 549 630 743 910 1097 1285

L 4.25 4.61 5 5.51 6.5 7.01 7.48 7.99 9.02 10 10.51 11.5 12.99 14.02

CLASS 150 H 7.17 7.68 9.33 11.57 11.57 13.19 15.47 18.39 21.61 24.8 29.25 35.83 43.19 50.59

W 4.72 4.72 4.72 7.87 7.87 7.87 7.87 9.84 9.84 11.81 11.81 13.78 15.75 15.75

L 5.51 5.98 6.5 7.48 8.5 9.49 11.14 12.01 15 15.87 16.5 17.99 19.76

CLASS 300 H 7.76 8.31 9.13 11.14 13.9 15.91 18.5 22.05 24.65 29.65 38.11 43.98 54.33

W 4.72 4.72 4.72 9.84 9.84 9.84 9.84 11.81 11.81 13.78 15.75 15.75 19.69

L 4.53 4.72 4.92 5.12 5.51 5.91 6.69 7.09 7.48 7.87 8.27 9.06 9.84 10.63

P N 16 H 7.17 7.68 9.33 11.57 11.57 13.19 1.54 18.39 21.61 24.8 29.25 35.83 43.19 50.59

W 120 120 120 200 200 200 200 250 250 300 300 350 400 400 unit:mm W 4.72 4.72 4.72 7.87 7.87 7.87 7.87 9.84 9.84 11.81 11.81 13.78 15.75 15.75 unit:in

FLANGED END SWING CHECK VALVE

2024

FEATURES - 1/2"~24" (DN15~DN600) - W.P. : PN16/40 CLASS 150/300/600 JIS 10K - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting

 

     

 

ITEM 1 2 3

PARTS BODY DISC NUT

ARM HINGE

5 6

HINGE PIN SEAL

BONNET

8 9 10

SPRING WASHER BONNET BOLT BOLT

MATERIAL ASTM A351-CF8M/ ASTM A351-CF8/ 1.4408 1.4308 AISI 304 ASTM A351-CF8M / ASTM A351-CF8 / 1.4408 1.4308 AISI 316 AISI 304 PTFE/304+GRAPHITE ASTM A351-CF8M / ASTM A351-CF8 / 1.4408 1.4308 AISI 304

* 8” UP GASKET: 304 + GRAPHITE





15 20 25 32 40 50 65 80 100 125 150 200 250 300 350

15 20 25 32 40 50 65 80 100 125 150 200 250 300 337

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12" 14"

0.59 0.79 0.98 1.26 1.57 1.97 2.56 3.15 3.94 4.92 5.91 7.87 9.84 11.81 13.27

L 108 117 127 140 165 203 216 241 292 330 356 495 622 698 787 L 4.25 4.61 5 5.51 6.5 7.99 8.5 9.49 11.5 12.99 14.02 19.49 24.49 27.48 30.98

CLASS 150

H 51 54 64 68 75 97 111 120 162 179 203 236 302 340 385

L 152 178 203 229 267 292 318 356 400 444 533 622 -

H 2.01 2.13 2.52 2.68 2.95 3.82 4.37 4.72 6.38 7.05 7.99 9.29 11.89 13.39 15.16

L 5.98 7.01 7.99 9.02 10.51 11.5 12.52 14.02 15.75 17.48 20.98 24.49 -

CLASS 150

CLASS 300

H 61 61 79 93 127 144 154 196 217 230 265 319 -

L 1 30 1 50 1 60 1 80 2 00 2 30 2 90 3 10 3 50 4 00 4 80 6 00 7 30 8 50 -

H 2.4 2.4 3.11 3.66 5 5.67 6.06 7.72 8.54 9.06 10.43 12.56 -

L 5 . 12 5 . 91 6.3 7 . 09 7 . 87 9 . 06 1 1 . 42 1 2 .2 1 3 . 78 1 5 . 75 1 8 .9 2 3 . 62 2 8 . 74 3 3 . 46 -

CLASS 300

PN 16

H 51 54 64 68 75 97 111 120 162 179 203 236 302 340 unit:mm H 2.01 2.13 2.52 2.68 2.95 3.82 4.37 4.72 6.38 7.05 7.99 9.29 11.89 13.39 -

unit:in

2025

DUAL PLATE CHECK VALVE

FEATURES - 2"~48" (DN50~DN1200) - W.P. : PN10/16/40 CLASS 150/300/600 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Metal to metal (option)

ITEM

PARTS

BODY

PLATE

3 SPRING 4 HINGE PIN 5 STOP PIN 6 PLUG 7 BODY BEARING 8 PLATE BEARING 9 SPRING BEARING 10 EYE BOLT 11

BODY SEAT

MATERIAL ASTM A351-CF8M ASTM A216-WCB DUCTILE IRON ASTM A216-WCB / ASTM A351-CF8 ASTM A351-CF8M /ASTM A351-CF3M AISI 316 WPA AISI 304 / AISI 316 S25C TEFLON SS41 NBR / EPDM / VITON SAME MATERIALS AS THE PLATE 410SS OVERLAY / STELLITY #6 OVERLAY

PN16 ONLY, OTHER PRESSURE RATING PLEASE CONTACT US. DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200

A 109 129 144 164 194 220 275 331 386 446 498 558 620 737 807 914 1014 1131 1345

B 60 73 89 114 141 168 219 273 324 356 406 457 508 610 711 813 914 1016 1219

C 54 54 57 64 70 76 95 108 143 184 191 203 213 222 321 356 368 419 524

D 32 37 45 53 67 79 105 123 155 170 195 219 244 292 337 397 440 495 603

Weight (kg) 3 4 5 6 9 10 19 31 56 71 99 118 180 258 580 526 656 1010 1926

unit:mm

NPS 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 28" 32" 36" 40" 48"

A 4.29 5.08 5.67 6.46 7.64 8.66 10.83 13.03 15.20 17.56 19.61 21.97 24.41 29.02 31.77 35.98 39.92 44.53 52.95

B 2.36 2.87 3.50 4.49 5.55 6.61 8.62 10.75 12.76 14.02 15.98 17.99 20.00 24.02 27.99 32.01 35.98 40.00 47.99

C 2.13 2.13 2.24 2.52 2.76 2.99 3.74 4.25 5.63 7.24 7.52 7.99 8.39 8.74 12.64 14.02 14.49 16.50 20.63

D 1.26 1.46 1.77 2.09 2.64 3.11 4.13 4.84 6.10 6.69 7.68 8.62 9.61 11.50 13.27 15.63 17.32 19.49 23.74

Weight (kg) 6.6 8.8 11 13.2 19.8 22 41.9 68.3 123.4 156.5 218.2 260.1 396.7 568.6 1278.3 1159.3 1445.8 2226 4244.9

unit:in

2026 2026C

DISC CHECK VALVE

FEATURES 2026 - 1/2”~8” (DN15~DN200) - W.P. : PN40 - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting 2026C - 1/4”~4” (DN8~DN100) - W.P. : PN63 - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - End connection - Socket Weld End Butt Weld End Screwed End

L (BW)

ITEM

PARTS

BODY

2 3 4

SPRING HOLDER DISC SPRING

END CAP

6 7 8 9

WASHER NUT BOLT SEAL

MATERIAL ASTM A351-CF8M/ ASTM A216-WCB/ 1.4408 1.0619 AISI 316

AISI 304

ASTM A351-CF8M/ ASTM A216-WCB/ 1.4408 1.0619 AISI 304 PTFE

Butt Weld End

2026

Socket Weld End

2026C

2026

2026C

DN 15 20 25 32 40 50 65 80 100 125 150 200

d 12.5 20 25 32 38 49 64 78 98 110 130 170

A 34 39 46 60 70 79 101 109 134 190 218 273

L 16 19 22 28 31.5 40 46 49 60 90 105 140

B 44.6 54 65 78 88 101.6 120.4 133 164 -

D 54 62 73 83 93 107 126.5 141.2 171.4 -

Weight (Kg)

DN 8 10 15 20 25 32 40 50 65 80 100

d 10 10 14 19 25 31 39 49 64 78 97

d1 14.2 17.5 21.8 27.4 34.1 42.7 49 61 77 90.2 115.3

L 60 60 63 71 81.5 91 97.5 117 131.5 143.5 174.5

L (BW) 66 66 67 81 89.5 92 103.5 117 131.5 143.5 174.5

D1 12 12 14 16 16 18 18 18 18 18 18

D 22 22 26 32 39 49 56 69 83 100 122.5

NPS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8"

d 0.49 0.79 0.98 1.26 1.5 1.93 2.52 3.07 3.86 4.33 5.12 6.69

A 1.34 1.54 1.81 2.36 2.76 3.11 3.98 4.29 5.28 7.48 8.58 10.75

L 0.63 0.75 0.87 1.1 1.24 1.57 1.81 1.93 2.36 3.54 4.13 5.51

B 1.76 2.13 2.56 3.07 3.46 4 4.74 5.24 6.46 -

D 2.13 2.44 2.87 3.27 3.66 4.21 4.98 5.56 6.75 -

Weight (lb)

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

d 0.39 0.39 0.55 0.75 0.98 1.22 1.54 1.93 2.52 3.07 3.82

d1 0.56 0.69 0.86 1.08 1.34 1.68 1.93 2.4 3.03 3.55 4.54

L 2.36 2.36 2.48 2.8 3.21 3.58 3.84 4.61 5.18 5.65 6.87

L (BW) 2.6 2.6 2.64 3.19 3.52 3.62 4.07 4.61 5.18 5.65 6.87

D1 0.47 0.47 0.55 0.63 0.63 0.71 0.71 0.71 0.71 0.71 0.71

D 0.87 0.87 1.02 1.26 1.54 1.93 2.2 2.72 3.27 3.94 4.82

0.1 0.2 0.2 0.4 0.6 0.8 1.4 2 3 10 13 24 unit:mm

0.2 0.4 0.4 0.9 1.3 1.8 3.1 4.4 6.6 22 28.7 52.9 unit:in

Weight (kg) 0.3 0.2 0.4 0.5 0.7 1.3 1.7 2.5 4.3 6.2 11 unit:mm Weight (lb) 0.6 0.5 0.8 1.1 1.6 2.8 3.7 5.4 9.5 14 24.3 unit:in

2027F

FLANGED END CHECK VALVE

FEATURES - 2"~24" (DN50~DN600) - W.P. : PN16 / CLASS 150 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting

ITEM 1 2 3 4 5 6

PARTS BODY DISC SPRING SEAT BUSHING SEAL

MATERIAL ASTM A351-CF8M ASTM A216-WCB AISI 316

AISI 304

VITON

BUNA-N

100

125

150

200

250

300

350

400

450

500

600

133

140

154

187

216

248

321

399

362

400

448

500

523

600

152

178

191

229

254

279

343

406

483

535

595

635

700

813 unit:mm

NPS

2-1/2"

10"

12"

14"

16"

18"

20"

24"

5.24

5.51

6.06

7.36

8.5

9.76

12.64

15.71

14.25

15.75

17.64

19.69

20.59

23.62

5.98

7.01

7.52

9.02

10.98

13.5

15.98

19.02

21.06

23.43

27.56

32.01 unit:in

SCREWED END PISTON CHECK VALVE

2050

FEATURES - 1/4"~3" (DN8~DN80) - W.P. : 800 WOG (PN50) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226

ITEM 1 2 3 4 5 6

PARTS BODY BONNET SPRING SCREW DISC SEAL

MATERIAL ASTM A351-CF8M AISI 316 / AISI 304 AISI 316 PTFE

DN 8 10 15 20 25 32 40 50 65 80

d 15 15 15 20 25 32 38 50 65 80

L 65 65 65 80 90 105 120 140 180 200

H 46.5 46.5 46.5 68.5 71 74 82.5 95 121.3 138.3

N PS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.59 0.59 0.59 0.79 0.98 1.26 1.5 1.97 2.56 3.15

L 2.56 2.56 2.56 3.15 3.54 4.13 4.72 5.51 7.09 7.87

H 1.83 1.83 1.83 2.7 2.8 2.91 3.25 3.74 4.78 5.44

unit:mm

unit:in

2049

SCREWED END Y-STRAINER

FEATURES - 1/4"~3" (DN8~DN80) - W.P. : 800 WOG (PN50) - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226

ITEM 1 2 3 4 5 6

PARTS BODY CAP DRAIN PLUG SCREEN SEAL GASKET

MATERIAL ASTM A351-CF8M AISI 316 PTFE

DN 8 10 15 20 25 32 40 50 65 80

d 15 15 15 20 25 32 40 50 65 80

L 65 65 65 80 90 105 120 140 180 200

H 46.5 46.5 46.5 54 67 74 81.5 95 121.3 138.3

M 1 /4"-PF 1 /4"-PF 1 /4"-PF 1 /4"-PF 1 /2"-PF 1 /2"-PF 1 /2"-PF 1 /2"-PF 1 /2"-PF 1 /2"-PF

N PS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

d 0.59 0.59 0.59 0.79 0.98 1.26 1.57 1.97 2.56 3.15

L 2.56 2.56 2.56 3.15 3.54 4.13 4.72 5.51 7.09 7.87

H 1.83 1.83 1.83 2.13 2.64 2.91 3.21 3.74 4.78 5.44

M 1 /4"-PF 1 /4"-PF 1 /4"-PF 1 /4"-PF 1 /2"-PF 1 /2"-PF 1 /2"-PF 1 /2"-PF 1 /2"-PF 1 /2"-PF

unit:mm

unit:in

2049F

FLANGED END Y-STRAINER

FEATURES - 1/2"~12" (DN15~DN300) - W.P. : PN16/40 CLASS 150/300 JIS 10K - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A351-CF8 ASTM A216-WCB 2 BONNET PTFE 3 GASKET 4 SCREEN AISI 316 AISI 304 PTFE 5 GASKET ASTM A351-CF8M 6 PLUG AISI 304 7 SPRING WASHER 8 BONNET BOLT ASTM A193-B7 AISI 304

15 20 25 32 40 50 65 80 100 125 150 200 250 300

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12"

0.59 0.79 0.98 1.26 1.57 1.97 2.56 3.15 3.94 4.92 5.91 7.87 9.84 11.81

CLASS 150 / JIS 10K H L 85 120 87 140 114 150 114 180 135 190 155 210 189 250 200 280 232 340 274 380 326 420 397 500 512 730 562 850

CLASS 300 H L 85 120 87 140 114 150 135 190 155 210 189 270 200 290 232 386 274 400 326 480 397 600 512 730 -

L 130 150 160 180 200 230 290 310 350 400 480 600 730 850

CLASS 150 / JIS 10K H L 3.35 4.72 3.43 5.51 4.49 5.91 4.49 7.09 5.31 7.48 6.1 8.27 7.44 9.84 7.87 11.02 9.13 13.39 10.79 14.96 12.83 16.54 15.63 19.69 20.16 28.74 22.13 33.46

CLASS 300 H L 3.35 4.72 3.43 5.51 4.49 5.91 5.31 7.48 6.1 8.27 7.44 10.63 7.87 11.42 9.13 15.2 10.79 15.75 12.83 18.9 15.63 23.62 20.16 28.74 -

L 5.12 5.91 6.3 7.09 7.87 9.06 11.42 12.2 13.78 15.75 18.9 23.62 28.74 33.46

PN 16

H 85 87 114 114 135 155 189 200 232 274 326 397 512 562

L 130 150 160 180 200 230 290 310 350 400 480 600 -

H 3.35 3.43 4.49 4.49 5.31 6.10 7.44 7.87 9.13 10.79 12.8 15.63 20 22.13

L 5.12 5.91 6.3 7.09 7.87 9.06 11.42 12.2 13.78 15.75 18.9 23.62 -

PN 40

H 85 87 114 114 135 155 189 200 232 274 326 397 unit:mm H 3.35 3.43 4.49 4.49 5.31 6.1 7.44 7.87 9.13 10.79 12.83 15.63 unit:in

2049B

FLANGED END BASKET STRAINER

FEATURES - 1"~12" (DN25~DN300) - W.P. : PN16/40 CLASS 150/300 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB AISI 304 2 SCREEN PTFE 3 SEAL 4 CAP ASTM A351-CF8M ASTM A216-WCB 5 BOLT ASTM A193-B8 ASTM A193-B7 6 BLOW OFF PLUG ASTM A351-CF8 ASTM A216-WCB

SIZE 1" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12"

ASTM A351-CF8 ASTM A351-CF8 ASTM A193-B8 ASTM A351-CF8

D 1/2" 1/2" 1" 1" 1" 1" 1" 1" 1" 2" 2"

DN 25 40 50 65 80 100 125 150 200 250 300

A 152 164 210 222 254 290 336 380 476 508 666

CLASS 150 B 174 216 216 260 306 390 430 410 560 685 760

C 77 120 120 160 200 254 280 270 340 340 420

A 163.6 177.2 224 227 272 307 363 396 507 542 670

CLASS 300 B 174 222 216 249.2 292 380 410 398 490 542 760

C 77 120 120 136.5 171.5 244 280 270 320 365 420

A 152 173 210 222 254 290 336 400 500 508 666

PN 16 B 174 216 216 260 306 390 430 410 560 685 760

C 77 120 120 160 200 254 280 270 340 340 420

A 163.6 177.2 224 227 272 307 363 396 507 542 670

PN 40 B 174 222 216 249.2 292 380 410 398 490 542 760

NPS 1" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12"

A 5.98 6.46 8.27 8.74 10 11.42 13.23 14.96 18.74 20 26.22

CLASS 150 B 6.85 8.5 8.5 10.24 12.05 15.35 16.93 16.14 22.05 26.97 29.92

C 3.03 4.72 4.72 6.3 7.87 10 11.02 10.63 13.39 13.39 16.54

A 6.44 6.98 8.82 8.94 10.71 12.09 14.29 15.59 19.96 21.34 26.38

CLASS 300 B 6.85 8.74 8.5 9.81 11.5 14.96 16.14 15.67 19.29 21.34 29.92

C 3.03 4.72 4.72 5.37 6.75 9.61 11.02 10.63 12.6 14.37 16.54

A 5.98 6.81 8.27 8.74 10 11.42 13.23 15.75 19.69 20 26.22

PN 16 B 6.85 8.5 8.5 10.24 12.05 15.35 16.93 16.14 22.05 26.97 29.92

C 3.03 4.72 4.72 6.3 7.87 10 11.02 10.63 13.39 13.39 16.54

A 6.44 6.98 8.82 8.94 10.71 12.09 14.29 15.59 19.96 21.34 26.38

PN 40 B 6.85 8.74 8.5 9.81 11.5 14.96 16.14 15.67 19.29 21.34 29.92

C 77 120 120 136.5 171.5 244 280 270 320 365 420 unit:mm C 3.03 4.72 4.72 5.37 6.75 9.61 11.02 10.63 12.6 14.37 16.54 unit:in

2032

NEEDLE VALVE

FEATURES - 1/4"~1" (DN8~DN25) - W.P. : 6000 PSI 10000 PSI - W.T. : -20째C~200째C (-4째F~392째F) - Thread type : ASTM B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226

ITEM 1 2 3 4 5 6 7 8

MATERIAL ASTM A351-CF8M AISI 304 TEFLON AISI 304 AISI 304 / AISI 316

PARTS BODY BONNET PACKING NUT STEM SCREW HANDLE O-RING

AISI 304 VITON

Weight (Kg)

45.5

0.3

0.8

6.3

0.4

0.9

0.5

1.2

113

0.8

1.3

117

1.3

1.8

NPS

Weight (lb)

1/4"

3.03

1.79

0.87

0.2

0.24

0.2

0.7

0.8

3/8"

3.07

2.32

0.98

0.2

0.24

0.25

0.9

1/2"

3.19

2.56

1.18

0.24

0.31

1.1

1.2

3/4"

4.45

2.76

1.38

0.31

0.39

1.8

1.3

4.61

3.15

1.77

0.31

0.47

2.9

1.8

unit:mm

unit:in

2014W

BUTTERFLY VALVE

FEATURES - 2"~24" (DN50~DN600) - W.P. : PN10/16 CLASS 125/150 JIS 10K - Wafer type - Lever operator / Gear opertor (option) - High performance butterfly valve 2014H ITEM 1 2 3 4 5 6 7 8 

PARTS BODY DISC SEAT STEM TAPER PIN COVER BUSHING O-RING

MATERIAL CI / DI DI / AL-BRONZE / AISI 316 EPDM AISI 416 STAINLESS STEEL DI PTFE EPDM









DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600

H1 76 89 95 114 127 140 177 203 242 267 298 318 349 410

H2 162 175 181 200 213 225 260 292 337 368 400 422 479 562

H3 30 30 30 30 30 30 36 36 36 45 51 51 64 71

L 45 48 49 55 58 59 64 70 80 80 90 109 135 156

A 12.7 12.7 12.7 15.9 19.05 19.05 22.2 28.6 31.8 31.8 33.3 38 41.15 50.65

K 10 10 10 12 14 14 17 22 24 24 27 27 32 36

S 9 9 9 11 14 14 17 22 22 22 22 27 27 36

C 1 2 0 .5 1 3 9 .5 1 5 2 .5 1 9 0 .5 216 2 4 1 .5 2 9 8 .5 362 432 476 5 3 9 .5 578 635 7 4 9 .5

N 19 19 19 19 22 22 22 25 25 29 29 32 32 35

E 92 92 92 92 92 92 125 125 150 150 210 210 210 300

B 70 70 70 70 70 70 102 102 125 125 165 165 165 254

F 9 9 9 9 9 9 11 11 13 13 22 22 22 18

NPS 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"

H1 2.99 3.5 3.74 4.49 5 5.51 6.97 7.99 9.53 10.51 11.73 12.52 13.74 16.14

H2 6.38 6.89 7.13 7.87 8.39 8.86 10.24 11.5 13.27 14.49 15.75 16.61 18.86 22.13

H3 1.18 1.18 1.18 1.18 1.18 1.18 1.42 1.42 1.42 1.77 2.01 2.01 2.52 2.8

L 1.77 1.89 1.93 2.17 2.28 2.32 2.52 2.76 3.15 3.15 3.54 4.29 5.31 6.14

A 0.5 0.5 0.5 0.63 0.75 0.75 0.87 1.13 1.25 1.25 1.31 1.5 1.62 1.99

K 0.39 0.39 0.39 0.47 0.55 0.55 0.67 0.87 0.94 0.94 1.06 1.06 1.26 1.42

S 0.35 0.35 0.35 0.43 0.55 0.55 0.67 0.87 0.87 0.87 0.87 1.06 1.06 1.42

C 4.74 5.49 6 7.5 8.5 9.51 11.75 14.25 17.01 18.74 21.24 22.76 25 29.51

N 0.75 0.75 0.75 0.75 0.87 0.87 0.87 0.98 0.98 1.14 1.14 1.26 1.26 1.38

E 3.62 3.62 3.62 3.62 3.62 3.62 4.92 4.92 5.91 5.91 8.27 8.27 8.27 11.81

B 2.76 2.76 2.76 2.76 2.76 2.76 4.02 4.02 4.92 4.92 6.5 6.5 6.5 10

F 0.35 0.35 0.35 0.35 0.35 0.35 0.43 0 .4 3 0.51 0.51 0.87 0.87 0.87 0.71

Torque (N-M) 26.7 37.3 50.1 92.3 149.5 222.8 429 711.1 1034.3 1216.8 1726.4 2234.7 3193.6 5765.5 unit:mm Torque (in-lb) 236.6 330.2 443 816.9 1323.2 1972.1 3797 6293.7 9154.1 10769.5 15279.8 19778.7 28265.4 51028.7 unit:in

2014L

BUTTERFLY VALVE

FEATURES - 2"~24" (DN50~DN600) - W.P. : PN10/16 CLASS 125/150 JIS 10K - Lug type - Lever operator / Gear operator (option) - High performance butterfly valve 2014H



ITEM 1 2 3 4 5 6 7 8



PARTS BODY DISC SEAT STEM TAPER PIN COVER BUSHING O-RING

MATERIAL CI / DI DI / AL-BRONZE / AISI 316 EPDM / BUNA AISI 416 STAINLESS STEEL DI PTFE EPDM







DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600

H1 76 80 95 114 127 140 173 203 237 279 304 362 368 444

H2 76 80 95 114 127 140 173 203 237 279 304 362 368 444

H3 30 30 30 30 30 30 36 36 36 45 51 51 64 70

L 45 48 49 55 58 59 64 70 80 80 90 109 135 156

A 12.7 12.7 12.7 15.9 19.05 19.05 22.2 28.6 31.8 31.8 33.3 38 41.15 50.65

K 10 10 10 12 14 14 17 22 24 24 27 27 32 36

S 9 9 9 11 14 14 17 22 22 22 22 27 27 36

C 1 2 0 .5 1 3 9 .5 1 5 2 .5 1 9 0 .5 216 2 4 1 .5 2 9 8 .5 362 432 476 5 3 9 .5 578 635 7 4 9 .5

n 4 4 4 8 8 8 8 12 12 12 16 16 20 20

M 5/8"-11 5/8"-11 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 7 / 8 " -9 7 / 8 " -9 1"-8 1"-8 1 - 1 / 8 " -7 1 - 1 / 8 " -7 1 - 1 / 4 " -7

E 92 92 92 92 92 92 125 125 150 150 210 210 210 300

B 70 70 70 70 70 70 102 102 125 125 165 165 1 65 254

F 9 9 9 9 9 9 11 11 13 13 22 22 22 18

NPS 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"

H1 2.99 3.15 3.74 4.49 5 5.51 6.81 7.99 9.33 10.98 11.97 14.25 14.49 17.48

H2 6.38 6.89 7.13 7.87 8.39 8.86 10.24 11.5 13.27 14.49 15.75 16.61 18.86 22.13

H3 1.18 1.18 1.18 1.18 1.18 1.18 1.42 1.42 1.42 1.77 2.01 2.01 2.52 2.76

L 1.77 1.89 1.93 2.17 2.28 2.32 2.52 2.76 3.15 3.15 3.54 4.29 5.31 6.14

A 0.5 0.5 0.5 0.63 0.75 0.75 0.87 1.13 1.25 1.25 1.31 1.5 1.62 1.99

K 0.39 0.39 0.39 0.47 0.55 0.55 0.67 0.87 0.94 0.94 1.06 1.06 1.26 1.42

S 0.35 0.35 0.35 0.43 0.55 0.55 0.67 0.87 0.87 0.87 0.87 1.06 1.06 1.42

C 4.74 5.49 6 7.5 8.5 9.51 11.75 14.25 17.01 18.74 21.24 22.76 25 29.51

n 4 4 4 8 8 8 8 12 12 12 16 16 20 20

M 5/8"-11 5/8"-11 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 7 / 8 " -9 7 / 8 " -9 1"-8 1"-8 1 - 1 / 8 " -7 1 - 1 / 8 " -7 1 - 1 / 4 " -7

E 3.62 3.62 3.62 3.62 3.62 3.62 4.92 4.92 5.91 5.91 8.27 8.27 8.27 11.81

B 2.76 2.76 2.76 2.76 2.76 2.76 4.02 4.02 4.92 4.92 6.5 6.5 6.5 10

F 0.35 0.35 0.35 0.35 0.35 0.35 0.43 0.43 0.51 0.51 0.87 0.87 0.87 0.71

2055

FLANGED END SIGHT GLASS

FEATURES - 1/2"~6" (DN15~DN150) - W.P. : PN16 CLASS 150 JIS 10K - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Face to face : DIN 3202 Part1-F1

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A351-CF8 ASTM A216-WCB 2 CAP PTFE 3 GASKET 4 STEM AISI 304 AISI 316 GLASS 5 GLASS 6 INDICATOR ASTM A351-CF8M ASTM A351-CF8 ASTM A216-WCB AISI 304 7 BOLT CARBON STEEL

15 20 25 32 40 50 65 80 100 150

130 150 160 180 200 230 290 310 350 480

NPS

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 6"

0.59 0.79 0.98 1.26 1.57 1.97 2.56 3.15 3.94 5.91

5.12 5.91 6.3 7.09 7.87 9.06 11.42 12.2 13.78 18.9

CLASS 150 / JIS 10K K H 35 115 35 115 35 115 55 143 55 143 55 143 85 185 85 196 110 228 160 310 CLASS 150 / JIS 10K K H 1.38 4.53 1.38 4.53 1.38 4.53 2.17 5.63 2.17 5.63 2.17 5.63 3.35 7.28 3.35 7.72 4.33 8.98 6.3 12.2

H 100 100 100 125 125 125 167 180 210 280 H 3.94 3.94 3.94 4.92 4.92 4.92 6.57 7.09 8.27 11.02

PN 16

K 40 40 40 50 50 50 85 85 110 150 K 1.57 1.57 1.57 1.97 1.97 1.97 3.35 3.35 4.33 5.91

unit:mm

unit:in

2056

SCREWED END SIGHT GLASS

FEATURES - 1/2"~2" (DN15~DN50) - W.P. : 200 WOG, PN16 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Thread type : ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226

ITEM 1 2 3 4 5 6

PARTS BODY CAP GASKET STEM GLASS INDICATOR

MATERIAL ASTM A351-CF8M ASTM A351-CF8 PTFE AISI 304 GLASS ASTM A351-CF8M ASTM A351-CF8 AISI 316

112

145

1 1 0 .5

145

1 1 0 .5

168

1 3 1 .2

N PS

1/2"

0. 5 9

4.4

1.49

2.67

3/4"

0. 7 9

4.4

1.49

2.67

unit:mm

0. 9 8

4.4

1.49

2.67

1-1/4"

1. 2 6

5.69

1.77

4.34

1-1/2"

1. 5 7

5.69

1.77

4.34

1. 9 6

6.6

2.16

5.15 unit:in

2080

BLIND FLANGE VALVE

FEATURES - 2"~30" (DN50~DN750) - W.P. : PN10/16/25/40 CLASS 150 - W.T. : -20째C~200째C (-4째F~392째F) - Investment casting - Maritime - Petrochemical and refinery industries - Terminals

MATERIAL ITEM PARTS 1 BODY ASTM A351-CF8M ASTM A216-WCB 2 DISC AISI 316 AISI 304 3 TIGHTENING NUT 4 DISC SEAL PTFE 5 STOP PIN AISI 316 AISI 304 6A TOP COVER SEAL A EPTFE 6B TOP COVER SEAL B PTFE 7 TOP COVER STUD AISI 316 AISI 304 8 SPRING STAINLESS STEEL 9 TOP COVER ASTM A351-CF8M ASTM A216-WCB 10 WASHER AISI 316 AISI 304 11 TOP COVER NUT 12 DRAIN PLUG SEAL PTFE 13 DRAIN PLUG AISI 316 AISI 304 14 O-RING (2"~10") VITON 15 METAL RING (2"~10") AISI 304 * ITEM 14,15 DESIGN IS ONLY FOR WCB

DN 50

100

125

150

200

250

300

PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40

165 165 165 165 185 185 185 185 200 200 200 200 220 220 235 235 250 250 270 270 285 285 300 300 340 340 360 375 395 405 425 450 445 460 485 515

173 173 173 173 185 185 185 185 194 194 194 194 235 235 235 235 245 245 245 245 265 265 265 265 300 300 300 300 330 330 330 330 360 360 360 360

125 125 125 125 145 145 145 145 160 160 160 160 180 180 190 190 210 210 220 220 240 240 250 250 295 295 310 320 350 355 370 385 400 410 430 450

154 154 154 154 154 154 154 154 154 154 154 154 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 200 200 200 200 200 200 200 200

M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M20 M20 M16 M16 M24 M24 M20 M20 M24 M24 M20 M20 M24 M27 M20 M24 M27 M30 M20 M24 M27 M30

4 4 4 4 4 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 16 16

18 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 22 22 22 22 22 22 22 22 24 24 24 24 26 26 26 26 28 28 28 28

unit:mm

NPS 2"

2-1/2"

10"

12"

PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40

6.5 6.5 6.5 6.5 7.28 7.28 7.28 7.28 7.87 7.87 7.87 7.87 8.66 8.66 9.25 9.25 9.84 9.84 10.63 10.63 11.22 11.22 11.81 11.81 13.39 13.39 14.17 14.76 15.55 15.94 16.73 17.72 17.52 18.11 19.09 20.28

6.81 6.81 6.81 6.81 7.28 7.28 7.28 7.28 7.64 7.64 7.64 7.64 9.25 9.25 9.25 9.25 9.65 9.65 9.65 9.65 10.43 10.43 10.43 10.43 11.81 11.81 11.81 11.81 12.99 12.99 12.99 12.99 14.17 14.17 14.17 14.17

4.92 4.92 4.92 4.92 5.71 5.71 5.71 5.71 6.3 6.3 6.3 6.3 7.09 7.09 7.48 7.48 8.27 8.27 8.66 8.66 9.45 9.45 9.84 9.84 11.61 11.61 12.2 12.6 13.78 13.98 14.57 15.16 15.75 16.14 16.93 17.72

6.06 6.06 6.06 6.06 6.06 6.06 6.06 6.06 6.06 6.06 6.06 6.06 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 6.38 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87

M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M20 M20 M16 M16 M24 M24 M20 M20 M24 M24 M20 M20 M24 M27 M20 M24 M27 M30 M20 M24 M27 M30

4 4 4 4 4 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 16 16

0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.79 0.79 0.79 0.79 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.94 0.94 0.94 0.94 1.02 1.02 1.02 1.02 1.1 1.1 1.1 1.1

unit:in

PRESSURE / TEMPERATURE RATING PRESSURE-TEMPERATURE RATING TEMPERATURE C 2200

205

149

260

315

2000

138

1800 120

1600

1200 80

P EE

1000

E PT

600

800

400

200

PRESSURE (BAR)

100

1400

F RT

PRESSURE (PSI)

1500

100

300

200

400 450 500 475

600

TEMPERATURE F

800/1000/1500/2000 WOG

3000/3600/6000 WOG

PRESSURE-TEMPERATURE RATING TEMPERATURE C

205

149

260

800

315

149

205

260

800

54 50

200

300

400 450 500 475

300

600

100

PRESSURE (PSI)

FM1

400

E/T

600

100

500

CTF

200

FM1 E/T

CTF

RTF

300

E RTF E

400

600

F PT

500

700

200

100

600

100

200

300

400 450 500 475

TEMPERATURE F

PN 16/40

CLASS 150/300

600

PRESSURE (BAR)

600

PRESSURE (PSI)

700

315

VALVE SEAT MATERIAL SELECTION GUIDE Material

Description

Color

PTFE

The material is the basic seat material used in most ball valves. Its chemical compatibility is excellent for almost all media service applications.

RTFE

15% Glass Reinforced TFE. This material is offered as the standard seal in most HAITIMA valves. Chemical resistance is compatible to virgin TFE with improved Off white cycle life and greater pressure-temperature rating than PTFE.

CTFE

25% Carbon with 75% TFE. This material offers a wide temperature range with better cycle life than RTFE.

Black

TFM

TFM is chemically modified PTFE that fills the gap between conventional PTFE and melt-processable PFA. According to ASTM D 4894 and ISO Draft WDT 539-1.5, TFM is classified as a PTFE. Compared to conventional PTFE, TFM has lower permeability and much lower deformation under pressure (cold flow) at room and elevated temperature. Also they can be used at higher pressures.

White

PEEK

Polyether-ether-ketone-high temperature semirigid elastomer. Best suited for high pressure and temperature service. Also offers very good corrosion resistance.

Grey

White

DELRIN

Delrin is capable of handling extremely high pressure. Must not used for oxygen service.

Creamy white

Cavity Filler

Designed to reduce the possibility of contamination by entrapment of process fluids in the void normally found behind the ball and the valve body in conventionally designed ball valves. Ideal for application where cross contamination is a concern, such as paints and dyes.

White

SPECIAL APPLICATION STANDARDS FIRE SAFE TEST API 607 ISO 10497 “SOUR GAS” NACE MR0175 BIOPROCESSING EQUIPMENT ASME BPE Certification to EN 10204 3.1 given only when previously requested with valve supply inquiry BUTT WELD ENDS ASME/ANSI B16.25 DIN 3239 PART 1 SOCKET WELD ENDS ASME/ANSI B16.11 DIN 3239 PART 2

FLANGED ENDS ASME/ANSI B16.5 ASME/ANSI B16.10 ASME/ANSI B16.34 EN 1092-1 EN 558 DIN 3202 WALL THICKNESS ASME/ANSI B16.34 EN 12516 MARKING ASME/ANSI B16.34 MSS SP 25 ISO 5209 TEST AND INSPECTION API 598 EN 12266

THREADED ENDS ASME/ANSI B1.20.1 ASME/ANSI B16.11 ISO 7/1 DIN 2999 BS21

SPECIAL MATERIALS INTRODUCTION

Taiwan Head Office 8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.