HTM BIO VALVE & SANITARY COMPONENTS by Naeem Aziz

HTM TwwAIWWAN

HTM

VALVES

AN ISO 9001 CERTIFIED MANUFACTURER

TABLE OF CONTENTS High Purity Ball Valve

03-08

Sanitary Standard Pressure Gauge

Clean Ball Valve

09-12

Heavy Duty Clamp-ring

39-40

Ferrule Adapter

41-44

14-16

Tubing Hanger

Manual Divert Valve

Kinds of Parts

Manual and Auto Control Tank Valve

DIN 11851 Unions

Auto Control Actuator For Butterfly Valve

DIN 11851 Expanding / Imperial Unions

Auto Control Actuator for Butterfly Valve (Warn Gear Design)

DIN 11853-1 Unions Form A

Range of Butterfly Valve

DIN 11864-1 Unions Form A

Full Forged Butterfly Valves

SMS Long Weld/short Unions

Range of Butterfly Valve

RJT (BS) Unions

Full Forged Butterfly Valves

IDF/JIS G3447 Unions

Wine Butterfly Valves and Ball Valves

Wine Unions

Mix-Proof Butterfly Valve Series

3A Unions

Manual and Auto Control Modulating Valve

Wide Range Tube Line

Range Of Non Return Valve (Check Valve)

3A Pipe Line

Range Of Non-Return Valve

SMS Pipe Line

30-31

DIN Pipe Line

Sample Cock Valve

BS Pipe Line

Hygienic Sample Valve for BPE

AS Pipe Line

63-64

Pneumatic/Manual Diaphragm Valve 2WAY/Tank Bottom Valve

High Purity Tube & Fitting Valve (ASTM BPE Standard)

Pneumatic/Manual Diaphragm Valve 3WAY/U-Bend valve

BPE Pipe Line

66-70

Filter

Vacuum Components

71-74

Kinds of Special Valve

Innovation Control Valve Range Auto Control Divert Valve

Range Of Hygienic Sight Glass

57-59

W 1

HIGH PURITY BALL VALVE

APPLICATIONS:

Pharmaceutical, Bio-Tech, Semiconductor, Vacuum, Drinking Water. Stainless Steel handle with Vinyl sleeve. Lockable in both open and closed position. Blow-out proof stem & Live-loaded design

Precison Engineered solid 316L stainless steel ball with ID dimensions equal to tube ID, ensuring maximun flow capacity with minimum pressure drop across the valve. Mechanical and Electropolished surface finishes as per ASME BPE Table SF-3 to suit specfic customer requirements.

Clamp or Butt Weld ends to ASME BPE with sulphur controlled between 0.005 and 0.017%. Mechanical and Electropolished Interna surface available as per customer requirement.

Body and Trim Materials

The valve body and ends are castings made from Stainless Steel conforming to ASTM A351 CF3M which improves the resistance to intergranular corrosion caused by welding. Welded end castings have low sulphur content of 0.005-0.017% and ferrite < 3%. The ball and stem are from Stainless Steel conforming to AISI 316L. These materials are offered for Biochemical, pharmaceutical, chemical and food machine equipment.

Stem & Ball

All valves have blowout proof stems. And a highly polished solid ball ensures tight shutoff and long service life. The ball orifice matches the tube internal diameter to reduce product deposits being trapped in the line and minimize pressure drop. Its post leading edges are rounded to eliminate excessive wear of the seats.

Surface Finish Table SF-1 Acceptance Criteria for Stainless Steel and Higher Alloy Mechanically Polished Product Contact Surface Finishes Anomaly or Indication

Acceptance Criteria

Pits

Antistatic Device available for volatile or flammable appication. Precision fit bottom entry 316L stem for maximum operating safety.

If diameter <0.020 in. and bottom is shiny. Pits <0.003 in. diameter are irrelevant and acceptable. No more than 4 pits per each 1/2 in. x 1/2 in. inspection window. The cumulative total of all relevant pits shall not exceed 0.040 in. None accepted. If Ra max. is met. As welded shall meet requirements of MJ-6. If welds are finished, then shall be smooth and blended. None accepted. For tubing, if cumulative length is <12.0 in. per 20 ft tube length or prorated and if depth is <0.003 in. For fittings, valves, and other process components, if length is <0.25 in. cumulatively, depth <0.003 in. and Ramax. is met. For vessels, if length < 0.50 in. at 0.003 depth and if <3 per inspection window. None accepted. If Ra max. is met. None accepted, visual inspection. See Table SF-3. For tubing, up to 3 per 20 ft length or prorated, if <75% of the width of the weld bead. For fittings, valves, vessels, and other process components, none accepted (as welded shall meet the requirements of MJ-6 and Table MJ-3). None open to the surface.

Cluster of pits Dents Finishing marks Welds

PTFE-TFM seats - hygienic non slotted design which eliminates entrapment areas. Provides tight shutoff and low pressures, reduces wear and valve torque. Cavity filled seats available for reducing dead volume between the ball and the body.

Nicks Scratches

Full encapsulated PTFE/TFM seal which prevent leakage to atmosphere or in vacuum service to internal media.

Surface cracks Surface inclusions Surface residuals Surface roughness (Ra) Weld slag

Precision cast stainless steel construction, solution annealed/normalised ensuring highest quality and added strength. Each body is etched with a heat number for material traceability. Purge ports available on the integral bosses for CIP or SIP applications.

Seats A flexible seat design provides tight shutoff at

high and low pressures, reduces wear and valve torque. The seats are designed for low torque giving bubble tight shutoff and have no equalizing pressure slots or chamfers on the perimeter. Other seat designs available are Cavity Filler seats for reducing dead volume in the valve cavity.

Porosity

Table SF-3 Ra Readings For Product Contact Surfaces Mechanically Polished [Note (1)] Ra Max.

Surface Designation SF1 SF2 SF3

End Connections

μ-in.

μm

20 25 30

0.51 0.64 0.76

Mechanically Polished [Note (1)] and Electropolished

All ends are one-piece castings and are machined on all wetted parts to high garde finish. The standard ends are tube end, hygienic clamp or extended tube end.

Ra Max.

Surface Designation SF4 SF5 SF6

μ-in.

μm

15 20 25

0.38 0.51 0.64

Grit

Ra μ-in.

RMS μm

NOTE: (1) Or any other finishing method that meets the Ra max.

Grit : Measures the number of scratches per linear inch of

Conversion Chart Standard

GENERAL NOTES: (a) All Ra readings are taken across the lay, wherever possible. (b) No single Ra reading shall exceed the Ra max. value in this table. (c) Other Ra readings are available if agreed upon between owner/user and manufacturer, not to exceed values in this table.

μ-in.

μm

150g

27-32

.68-.80

30-35

.76-.89

180g

18-23

.46-.58

20-25

.51-.64

240g

14-18

.34-.46

15-20

.38-.51

320g

8-10

.21-.25

9-11

.23-.28

abrasive pad. Higher numbers indicate a smoother finish. RMS : Defined as Root Mean Square roughness, this method measures a sample for peaks and valleys. Lower numbers indicate a smoother finish. Ra : Known as the Arithmetic Mean, this measurement represents the average value of all peaks and valleys. Lower numbers indicate a smooth finish.

HTM TwwAIWWANWW

AN ISO 9001 CERTIFIED MANUFACTURER

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

HIGH PURITY BALL VALVE

APPLICATIONS:

Pharmaceutical, Bio-Tech, Semiconductor, Vacuum, Drinking Water. Stainless Steel handle with Vinyl sleeve. Lockable in both open and closed position. Blow-out proof stem & Live-loaded design

Clamp or Butt Weld ends to ASME BPE with sulphur controlled between 0.005 and 0.017%. Mechanical and Electropolished Interna surface available as per customer requirement.

Body and Trim Materials

Stem & Ball

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Surface Finish Table SF-1 Acceptance Criteria for Stainless Steel and Higher Alloy Mechanically Polished Product Contact Surface Finishes Anomaly or Indication

Acceptance Criteria

Pits

Antistatic Device available for volatile or flammable appication. Precision fit bottom entry 316L stem for maximum operating safety.

Cluster of pits Dents Finishing marks Welds

Nicks Scratches

Full encapsulated PTFE/TFM seal which prevent leakage to atmosphere or in vacuum service to internal media.

Surface cracks Surface inclusions Surface residuals Surface roughness (Ra) Weld slag

Seats A flexible seat design provides tight shutoff at

Porosity

Table SF-3 Ra Readings For Product Contact Surfaces Mechanically Polished [Note (1)] Ra Max.

Surface Designation SF1 SF2 SF3

End Connections

μ-in.

μm

20 25 30

0.51 0.64 0.76

Mechanically Polished [Note (1)] and Electropolished

All ends are one-piece castings and are machined on all wetted parts to high garde finish. The standard ends are tube end, hygienic clamp or extended tube end.

Ra Max.

Surface Designation SF4 SF5 SF6

μ-in.

μm

15 20 25

0.38 0.51 0.64

Grit

Ra μ-in.

RMS μm

NOTE: (1) Or any other finishing method that meets the Ra max.

Grit : Measures the number of scratches per linear inch of

Conversion Chart Standard

μ-in.

μm

150g

27-32

.68-.80

30-35

.76-.89

180g

18-23

.46-.58

20-25

.51-.64

240g

14-18

.34-.46

15-20

.38-.51

320g

8-10

.21-.25

9-11

.23-.28

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

2013KC

HIGH PURITY BALL VALVE

2013KC

HIGH PURITY BALL VALVE

FEATURES

- Clamp end, 1/2"~2" (DN15~DN50) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad

- Clamp end, 2-1/2"~4" (DN65~DN100) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-static device (option) - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad

2013KC-BPE - Clamp end castings have low sulphur content of 0.005-0.017% ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PARTS BODY CAP BALL STEM BALL SEAT GASKET THRUST WASHER PACKING GLAND RING BELLEVILLE WASHER LOCKING WASHER STEM WASHER STEM NUT BOLT BOLT WASHER NUT STOP PIN LOCKING DEVICE HANDLE HANDLE SLEEVE

2013KC-BPE - Clamp end castings have low sulphur content of 0.005-0.017%

MATERIAL ASTM A351-CF3M

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

ASTM A276-316L PTFE / TFM1600 PTFE AISI 304 AISI 301

AISI 304

PVC

ASTM A351-CF3M ASTM A276-316L PTFE / TFM1600 PTFE AISI 304 AISI 301

AISI 304

ISO5211

Torque(N-M)

88.9

53.5

114

9.4

25.4

3/8"-24UNF

5.7

F03

4.5

101.6

55.0

114

15.75

25.4

3/8"-24UNF

5.7

F03

ISO 5211

Torque (N-M)

121.9

66.0

146

22.1

50.4

7/16"-20UNF

7.5

F04

130

70.0

146

28.5

50.4

7/16"-20UNF

7.5

F04

60.2

77.4

159

132.1

222

40.6

M10

102

70.1

85.1

M20*2.5

F10

139.7

81.0

178

34.8

50.4

9/16"-18UNF

8.6

F05

72.9

90.9

177.8 165.6

349

42.7

M10

44.5

80.5

102

102.1

19.1

1"-14UNEF

F10

158.76

89.5

178

47.5

63.9

9/16"-18UNF

8.6

F05

100

97.3

118.9 215.9 179.1

349

42.9

M10

44.5

80.5

102

102.1

19.1

1"-14UNEF

F10

unit:mm

NPS

ISO5211

Torque(in-lb)

1/2"

3.5

2.11

4.49

0.37

1.42

3/8"-24UNF

0.23

F03

39.8

3/4"

2.17

4.49

0.62

1.42

3/8"-24UNF

0.2

F03

53.1

4.80

2.6

5.75

0.87

1.98

1.65

7/16"-20UNF

0.3

F04

97.4

1-1/4"

5.12

2.76

5.75

1.12

1.98

1.65

7/16"-20UNF

0.3

F04

106.2

1-1/2"

5.5

3.19

7.01

1.37

1.98

1.97

9/16"-18UNF

0.34

F05

132.8

6.25

3.52

7.01

1.87

2.52

1.97

9/16"-18UNF

0.34

F05

194.7

unit:mm NPS

2-1/2" 2.37

ISO 5211

Torque (in-lb)

2.5

6.26

5.2

8.74

1.6

M10

1.26

2.52

4.02

2.76

3.35

0.55

M20*2.5

F10

256.7

2.87

6.52

13.74

1.68

M10

1.75

3.17

4.02

3.78

4.02

0.75

1"-14UNEF

F10

309.8

3.83

8.5

7.05

13.74

1.69

M10

1.75

3.17

4.02

3.78

4.02

0.75

1"-14UNEF

F10

442.5

unit:in

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

MATERIAL

PARTS BODY CAP BALL STEM SEAT SEAL THRUST WASHER PACKING GLAND RING BELLEVILLE WASHER LOCKING WASHER STEM NUT WRENCH BLOCK STOPPER BOLT STOP PIN HANDLE BOLT

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Http://www.haitima.com.tw

E-mail : haitima@seed.net.tw

2012CM

CLEAN BALL VALVE

2013CM

CLEAN BALL VALVE

FEATURES

- Tube port, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Tube End W.P. : 200 WOG - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DN 15 20 25 40 50 65 80 100 NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4"

d D 9.6 12.7 15.8 19.1 22.1 25.4 34.8 38.2 47.7 50.8 60.3 63.5 72.9 76.4 97.5 101.7 d 0.38 0.62 0.87 1.37 1.88 2.37 2.87 3.84

W 141.2 141.2 141.2 188.3 188.3 260 260 295

H 63.5 66.6 69.4 100.6 110.6 139.2 148.2 175

H D W 0.5 5.56 2.5 0.75 5.56 2.62 1 5.56 2.73 1.5 7.41 3.96 2 7.41 4.35 2.5 10.24 5.48 3.01 10.24 5.83 4 11.61 6.89

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

MATERIAL ASTM A351-CF8M

PTFE

AISI 304 AISI 316 AISI 304 PVC AISI 304

PARTS BODY CAP BALL SEAT SEAL THRUST WASHER PACKING GLAND NUT STEM WASHER STEM NUT STEM BOLT WASHER NUT BOLT HANDLE HANDLE SLEEVE LOCKING DEVICE

MATERIAL ASTM A351-CF8M

PTFE

AISI 304 AISI 316 AISI 304 PVC AISI 304

L L1 T 90.7 20 26.7 103 22.5 33 115 25 38 140 25 54 158 25 69 197 25 85 228 25 101.6 241.8 25 121.8

C 6.5 6.5 6.5 8.5 8.5 12 12 16

I 37 37 42 50 50 72 72 94

K 13 13 13 19.5 19.5 26 26 35

K1 18 18.7 18 30 29 37.7 38.2 52

P 36 36 42 50 50 70 70 102

M S M5 M10 M5 M10 M5 M10 M6 M12 M6 M12 M8 3/4"W M8 3/4"W M10 1"W

Torque For Cavity Filler Seat (N-M) 3.6 5.1 8.1 19.5 26 52 58.5 84.5

Weight (kg) 0.7 0.9 1.2 2.6 4 8.4 13.5 19.5

DN 15 20 25 40 50 65 80 100

D 9.6 15.8 22.1 34.8 47.7 60.3 72.9 97.5

W 141.2 141.2 141.2 188.3 188.3 260 260 295

H H1 63.5 48.5 66.6 51.8 69.4 54.5 100.6 82.5 110.6 91.5 139.2 117.2 148.2 126.7 175 162

H2 18 18.7 18 30 29 37.7 38.2 52

H3 13 13 13 19.5 19.5 26 26 35

L 90.7 103 115 140 158 197 228 241.8

G 25.5 25.5 29.7 35.4 35.4 49.5 49.5 72.1

K 37 37 42 50 50 72 72 94

J 25.4 25.4 50.5 50.5 64 77.5 91 119

N 6.5 6.5 6.5 8.5 8.5 12 12 16

ISO 5211 F03 F03 F04 F05 F05 F07 F07 F10

Torque For Cavity Filler Seat (N-M) 3.6 5.1 8.1 19.5 26 52 58.5 84.5

Weight (kg) 0.8 1 1.4 2.7 4.2 8.7 14.2 20.5

L 3.57 4.06 4.53 5.51 6.22 7.76 8.98 9.52

C 0.26 0.26 0.26 0.33 0.33 0.47 0.47 0.63

I 1.46 1.46 1.65 1.97 1.97 2.83 2.83 3.7

K 0.51 0.51 0.51 0.77 0.77 1.02 1.02 1.38

K1 0.71 0.74 0.71 1.18 1.14 1.48 1.5 2.05

P 1.42 1.42 1.65 1.97 1.97 2.76 2.76 4.02

M S M5 M10 M5 M10 M5 M10 M6 M12 M6 M12 M8 3/4"W M8 3/4"W M10 1"W

Torque For Cavity Filler Seat (in-lb) 32.2 44.9 71.3 172.6 230.1 460.2 517.8 747.9

Weight (lb) 1.6 2.1 2.6 5.7 8.9 18.6 29.8 43

NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4"

D 0.38 0.62 0.87 1.37 1.88 2.37 2.87 3.84

W 5.56 5.56 5.56 7.41 7.41 10.24 10.24 11.61

H 2.5 2.62 2.73 3.96 4.35 5.48 5.83 6.89

H2 0.71 0.74 0.71 1.18 1.14 1.48 1.5 2.05

H3 0.51 0.51 0.51 0.77 0.77 1.02 1.02 1.38

L 3.57 4.06 4.53 5.51 6.22 7.76 8.98 9.52

G 1 1 1.17 1.39 1.39 1.95 1.95 2.84

K 1.46 1.46 1.65 1.97 1.97 2.83 2.83 3.7

J 1 1 1.99 1.99 2.52 3.05 3.58 4.69

N 0.26 0.26 0.26 0.33 0.33 0.47 0.47 0.63

ISO 5211 F03 F03 F04 F05 F05 F07 F07 F10

Torque For Cavity Filler Seat (in-lb) 32.2 44.9 71.3 172.6 230.1 460.2 517.8 747.9

Weight (lb) 1.7 2.1 3 5.9 9.2 19.2 31.3 45.2

L1 0.79 0.89 0.98 0.98 0.98 0.98 0.98 0.98

T 1.05 1.3 1.5 2.13 2.72 3.35 4 4.8

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

PARTS BODY CAP BALL SEAT SEAL THRUST WASHER PACKING GLAND NUT STEM WASHER STEM NUT STEM BOLT WASHER NUT BOLT HANDLE HANDLE SLEEVE LOCKING DEVICE

- Clamp end, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Cavity filled seats (option) - Locking device - ISO 5211 Mounting pad

unit:mm

unit:in

H1 1.91 2.04 2.15 3.25 3.6 4.61 4.99 6.38

unit:mm

unit:in

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

2013CD

CLEAN BALL VALVE

2057C

CLEAN BALL VALVE

FEATURES

- Clamp end, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Live-loading design - Cavity filled seats (option) - Locking device - ISO 5211 Direct mounting pad - Automation accessories (option) ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

MATERIAL

PARTS BODY CAP BALL SEAT STEM THRUST WASHER O-RING PACKING GLAND RING BELLEVILLE WASHER NUT LOCKING WASHER FLAT WASHER STOP PIN HANDLE HANDLE SLEEVE SPRING WASHER NUT BOLT

ASTM A351-CF8M

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

ASTM A351-CF3M

ASTM A351-CF8M PTFE / TFM1600 ASTM A276-316 PTFE VITON PTFE AISI 304 AISI 301 AISI 304 PVC AISI 304

DN 8 10 15 20 25 32 40 50

D 42 42 50 70 70 102 102 125

D1 36 36 42 50 50 70 70 102

D2 45.5 47 57.5 83 100 126 148 183

d 9.6 15.8 22.1 34.8 47.7 60.3 72.9 97.5

d1 25.4 25.4 50.5 50.5 64 77.5 91 119

R 2.75 2.75 3.5 4.5 4.5 5.5 5.5 6.5

R1 2.75 2.75 2.75 3.5 3.5 4.5 4.5 5.5

S 9 9 11 14 14 17 17 22

L 90.7 103 115 139 158 197 228 241.8

H 121.3 121.3 150 150 180 180 243.5 285

H1 9 11 11 14 14 17 17 22

W 64.7 64.7 79 96.5 104 142 150 185

NPS 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

D 1.65 1.65 1.97 2.76 2.76 4.02 4.02 4.92

D1 1.42 1.42 1.65 1.97 1.97 2.76 2.76 4.02

D2 1.79 1.85 2.26 3.27 3.94 4.96 5.83 7.2

d 0.38 0.62 0.87 1.37 1.88 2.37 2.87 3.84

d1 1 1 1.99 1.99 2.52 3.05 3.58 4.69

R 0.11 0.11 0.14 0.18 0.18 0.22 0.22 0.26

R1 0.11 0.11 0.11 0.14 0.14 0.18 0.18 0.22

S 0.35 0.35 0.43 0.55 0.55 0.67 0.67 0.87

L 3.57 4.06 4.53 5.47 6.22 7.76 8.98 9.52

H 4.78 4.78 5.91 5.91 7.09 7.09 9.59 11.22

H1 0.35 0.43 0.43 0.55 0.55 0.67 0.67 0.87

W 2.55 2.55 3.11 3.8 4.09 5.59 5.91 7.28

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

- Clamp end, 1/2"~4" (DN15~DN100) - Body W.P. : 1000 WOG (PN63) - Clamp End W.P. : 200 WOG - W.T. : -20°C~200°C (-4°F~392°F) - Investment casting - Blow-out proof stem - Live-loading design - Anti-Static Device (option) - Cavity filled seats - Locking device - ISO 5211 Direct mounting pad - Automation accessories (option)

Torque (N-m) 5 7.5 11 16 20 40 50 60 unit:mm Torque (in-lb) 44.3 66.4 97.4 141.6 177 354 442.5 531 unit:in

PARTS BODY CAP FLAT CAP BALL SEAT A SEAT B SEAL STEM THRUST WASHER PACKING GLAND RING BELLEVILLE WASHER LOCKING WASHER FLAT WASHER STOP PIN STEM NUT HANDLE HANDLE SLEEVE SPRING WASHER BOLT A BOLT B

MATERIAL ASTM A351-CF8M ASTM A351-CF3M ASTM A351-CF8M

DN 15 20 25 40 50 65 80 100

A 9 9 11 14 14 17 23 23

B 44.5 48 59 72 82 100 125.5 135.5

C 23.5 26 30.5 40 50 61 74 84

d 9.4 15.8 22.1 35 47.6 60 73 97.4

D 25.4 25.4 50.4 50.4 63.9 77.5 90.9 119

H 79 82.5 91 107 117 108.5 134 144

L 118 127 152.4 175 190 228 260 318

S 9 9 11 14 14 17 22 22

W 122 122 137 183 183 370 400 400

ISO 5211 F03/F04 F03/F04 F04/F05 F05/F07 F05/F07 F07/F10 F10/F12 F10/F12

NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4"

A 0.35 0.35 0.43 0.55 0.55 0.67 0.91 0.91

B 1.75 1.89 2.32 2.83 3.23 3.94 4.94 5.33

C 0.93 1.02 1.2 1.57 1.97 2.4 2.91 3.31

d 0.37 0.62 0.87 1.38 1.87 2.36 2.87 3.83

D 1 1 1.98 1.98 2.52 3.05 3.58 4.69

H 3.11 3.25 3.58 4.21 4.61 4.27 5.28 5.67

L 4.65 5 6 6.89 7.48 8.98 10.24 12.52

S 0.35 0.35 0.43 0.55 0.55 0.67 0.87 0.87

W 4.8 4.8 5.39 7.2 7.2 14.57 15.75 15.75

ISO 5211 F03/F04 F03/F04 F04/F05 F05/F07 F05/F07 F07/F10 F10/F12 F10/F12

PTFE / TFM1600 PTFE ASTM A276-316 PTFE AISI 304 AISI 301 AISI 304 PVC AISI 304

Torque (N-m) 4.4 5.9 11.7 18.2 26 65 106.6 130 unit:mm Torque (in-lb) 39.1 51.8 103.6 161.1 230.1 575.3 943.5 1150.6 unit:in

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Innovation Control Valve Range

Auto Control Divert Valve Caution, opening/closing time: Opening/Closing time will be effected by the following The air supply(air pressure). The length and dimensions of the air hose. Number of valves connected to the same air hose. Use of single solenoid valve for serial connected air actuator functions. Product pressure. Air connections Compressed air: R1/8"(BSP), Internal Thread. Technical data Air pressure:----------------5to7 bar.

Width Range Products: Auto Control Divert Valve Actuator for Butterfly Valve Wide Range Butterfly Valve Sight Glass & Non-return Valve 3A,BS,AS,NZS,DIN,SMS,RJT,CIP,IDF...etc. Standard Union & Ferrule & Fitting 3A,DIN,SMS...etc. ASTM-A270 Sanitary Tube OEM Valve and Sanitary Ball Valve OEM/ODM Services

ØD

Y Y1 Y Type

W1 C2

ØB ØA

W C3

W C1

SIZE:1.0"

Technical Service for Manual & Control Valve Unit For Joint any Tube fitting-3A, SMS, DIN, BS, Elbow, Tee, Reducer Clamp-Union-Weld/Expanding Ferrule, Clamp, Valve-Butterfly, Check, Sight Glass, Ball Valve with our Orbitol weld Equipment

SIZE ØA ØB C C1 C2 C3 W W1 ØD L L1 Y Y1 (W/W1)+SMS male (W/W1)+IDF male (W/W1)+RJT male

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

1.0" 22.1 25.4 56.7 58.5 50.6 81.4 59.9 52 60 153.6 17 96.1 121.5 19 21.5 27

1.5" 34.7 38.1 80 81.2 61

2.0" 47.5 50.8 92.4 85.7 65.4

2.5" 60.2 63.5 120 103.1 72.1

3.0" 72.9 76.2 128 116.4 79.7

68.5 57.4 85 290 25 142.3 167.7 23 21.5 27

73 66.8 85 296.3 25 168.6 194 23 21.5 27

90.4 79.5 133 365.8 32 211.6 237 27 21.5 27

103.7 96.1 133 368.9 36 244.7 270.1 27 21.5 27

SIZE:1.5"~3.0"

Type: L, T and L/L, T/L, L/T, T/T L

L /L

T/L

L/T

T/T

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Auto Control Divert Valve

Operation Instruction 1. Haitima pneumatic valve can equipped different type of flow design,(as drawing A) to get various flow control. 2. Available for SMS, DIN, IDF, RJT, 3A, Ferrule....., Welding; Clamp; Unions......connect end. 3. Material: 3-1. All parts connect with fluid are made of stainless steel AISI 316/316L(1.4401/1.4404). 3-2. The other parts in AISI 304 (1.4301). 3-3. The valve stem is sealed by a special EPDM/Silicon/Viton seal and according to international standard for use on food or pharmaceutical. 4. Operating air pressure: 5bar-8bar compressed air. 5. Control ways: a. Designed different type for controlling control various flow, as type L; T; F...etc. b. Choose appropriate dimensions and type, as 2".......clamp or welding. c. Choose appropriate control ways (manual or pneumatic): c-1. Manual control valve to be equipped with a rapid pitch screw with protection against unscrewing. c-2. Or choose air/spring(simple effect); or air/air (double effect) for pneumatic control. c-3. Can use Haitima automatic control box to get signal transfer and complete individual valve control. c-3-1. Signal transfer: a. with 10-30VDC proximity switch connection:1 or 2pcs (PNP OR NPN) b. Or 3A 125VAC,30VDC micro switch connection: 2pcs c-3-2. Complete individual valve control: Choose (a) or (b) +DC24 3.0W electric valve:1pc & air manifold (for complete control box).

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Max. flow tube pressure without leakage of valve seat. If pressure over table Max. suggest to add proof Max. valve

10. SA. Pneumatic downward movement, spring return (NO-lower seat) Actuator type / function: 20. AS. Pneumatic upward movement, spring return (NC-lower seat) 30. AA. Pneumatic upward and downward movement (A/A)

T/T

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Manual Divert Valve

Manual and Auto Control Tank Valve Materials:

Materials:

Flow area: AISI 316L Other steel parts: AISI 304 Plug stem: AISI 316L with Chromium Plated Surface Gasket for Fiow Area: EPDM/SILICON/VITION Other seals: NBR and EPDM Surface: Mirror / Satin / Sand Blasted

Flow area: AISI 316L Other steel parts: AISI 304 Plug stem: AISI 316L with chromium plated surface Gasket for fiow area: EPDM/SILICON/VITION Other seals: NBR and EPDM Surface: Mirror/ satin /sand Blaste

Technical data:

Max production pressure :1000kpa(10bar). Temperature range: Full vacuum. -10°C to +140°C(EPDM).

ØC GF

GF D

45°

Ø B

Up to close

45°

SIZE:1.0"

45° L3

Manual

ØC

45°

Up to open

ØC

Y Y1 Y Type

Up to close

ØC

ØA

ØB ØA

ØB

Up to open

Auto

Max production pressure :1000kpa(10bar). Temperature range: Full vacuum. -10°Cto+140°C(EPDM).

W C1

SIZE ØA ØB C C1 C2 C3 W W1 ØD L L1 Y Y1 (W/W1)+SMS male (W/W1)+IDF male (W/W1)+RJT male

1.0" 22.1 25.4 56.7 58.5 50.6 81.4 59.9 52 60 101 17 96.1 121.5 19 21.5 27

1.5" 34.8 38.1 80 81.2 61

2.0" 47.5 50.8 92.4 85.7 65.4

2.5" 60.2 63.5 120 103.1 72.1

3.0" 72.9 76.2 128 116.4 79.7

68.5 57.4 85 126 25 142.3 167.7 23 21.5 27

73 66.8 85 135 25 168.6 194 23 21.5 27

90.4 79.5 133 167 32 211.6 237 27 21.5 27

103.7 96.1 133 170 36 244.7 270.1 27 21.5 27

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Type:L,T,Y and L/L,T/L,L/T,T/T L

L/L

T/L

L/T

SIZE:1.5"~3.0"

T/T

SIZE ØA ØB ØC D E F G L L1 L2 L3

1.0" 22.1 50.5 110 56.8 65.8 14 10 190 22 94 30

1.5" 34.8 50.5 140 95.1 93 20 14 354 31 122 35

2.0" 47.5 64 150 106.5 106 20 14 360 31 127 35

2.5" 60.2 77.5 180 124.7 125.5 20 14 446 39 158 45

3.0" 72.9 91 200 137.5 149.5 20 14 450 39 164 45

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Auto Control Actuator for Butterfly Valve (Warn Gear Design)

Auto Control Actuator For Butterfly Valve C2, C3, C101 actuator instruction

1. C2, C3: Shut-Off time: 1.5 second ; Weight: 3.85KGS. C101: Shut-Off time: 1.7 second ; Weight: 4.7KGS 2. Operating air pressure: 6 kg/cm2 ; Min. 5bar ; Max. 9bar compress air 3. C2, C3 Air consumption: 0.266 Liter at 5 bar ; C101 Air consumption: 0.550 Liter at 5 bar. 4. Material: stainless steel AISI 304 5. Can be equipped with normal close or open.

Assembly valve way

174 31

22 16

1. C3 Actuator apply to butterfly valve in size 1"-3" of the disc head DIA. 12mm X 8mm. (other size can be required) 2. Signal transfer: can be connect with M12 screw proximity switch. 3. Air/Air (double effect) actuator or air/spring (simple effect) actuator are available. 4. Accessories: adapter: 1pc ; M6 X 35 screw: 2pcs ; washer: 4pcs ; M6 nut: 2pcs ; 1/8PT quick coupler: 1pc

20 19

19 15 18

14 13

Operation instruction

174

1. C2 Actuator apply to butterfly valve in size 1"-3" of the disc head DIA. 12mm X 8mm.(other size can be required) 2. Control ways: 2-1. Signal transfer: a.With 10-30VDC proximity switch contact: 1 or 2pcs. b.Or 3A 125VAC. 30VDC microswitch: 2pcs 2-2 Individual control: Choice (a) or (b) + DC24 3.0W electric valve: 1pc & Air manifold (for complete control box). 3. Air/Air (double effect) actuator or air/spring (simple effect) actuator are available. 4. Accessories: adapter: 1pcs ; M6 X 35 screw: 2pcs ; washer: 4pcs ; M6 nut: 2pcs ; 1/8PT quick coupler: 1pcs

Operation instruction

C101

ø120

272

ø120

(圖1) 31

1. C101 Actuator apply to butterfly valve in size 4"-6" of the disc head DIA. 12mm X 12mm. 2. Control ways: 2-1. Signal transfer: a.Can be connect with M18 or M12 screw proximity switch (PNP or NPN) as (1) b.With 10-30 VDC proximity switch contact: 1 or 2pcs (PNP OR NPN) c.Or 3A 125VAC. 30VDC microswitch: 2pcs 2-2. Individual control: Choice (a) or (b) or (c) + DC24 3.0W electric valve: 1pc & air manifold (for complete control box). 3. Air/Air (double effect) actuator or air/spring (simple effect) actuator are available. 4. Accessories: adapter: 1pcs ; M6 X 40 screw: 2pcs ; washer: 4pcs ; M6 nut: 2pcs ; 1/8PT quick coupler: 1pcs

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Parts List Q'TY Material Item Parts name 1 St.St cylinder 1 St.St 304 2 St.St cylinder cap 1 St.St 304 Tenac 3 Pistion 1 4010/SH410 1 St.St 304 4 Lock wire clip 5 Lower cylinder end 1 St.St 304 6 Pistion guide part 2 St.St 304 7 Pistion guide part 1 St.St 304 8 Compress spring 6 St.St 304 9 Pistion guide part 5 St.St 304 10 Pistion axle O-ring 1 Teflon 11 Teflon gasket 1 Teflon 12 Coupling axle piece 1 St.St 304 13 Conact seal 1 St.St 304 14 Circlip 1 St.St 304 15 Mounting bracket 1 St.St 304 16 Connection piece 1 St.St 304

Operation instruction

C2 Type construction assembly drawing & items list C2, C3 & C101： Max. output torque 20N/M on C2 & C3 Max. output torque 30N/M on C101

8 1

Assembly valve way

18 19 20 21 22

M8x12 ST.ST screw M6 Nut M6x35 ST.ST screw Air connection Positioning index

2 2 2 1 1

St.St 304/316(L) St.St 304 St.St 304 St.St 304 Cupper St.St 304

Control Box for Auto Actuator and Divert Valve 1

Control box construction assembly drawing & items list

Parts List Item Parts name Q'TY 1

Cover

2 3

Switch plate Plastic hanger

1 2

Micro switch

Air manifold

6 7 8

Electrovalve Air connection E/N connect piece

1 1 1

3 6 4 5

Material PC or St.St 304 St.St 304 St.St 304 3A 125VAC. 30VDC P.O.M (Plastic) or St.St 304 DC24 3.0W Cu St.St 304

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Range of Butterfly Valve

NAME

KNOB

STEEL-BAR

SPRING ST.ST

ST.ST

HOLDER

BODY

DISC

1.0"

EPDM RUBBER SEAT

1.5"

<1 kgf-m

SCREW BOLT

2.0"

1.3 kgf-m

2.5"

1.5 kgf-m

3.0"

2.0 kgf-m

4.0"

3.1 kgf-m

7 8 9

Torque for Full Open/Close

3A Clamp End With St.St Pull Handle, 4 Position

<1 kgf-m

3A/BS/SMS Weld/Weld Butterfly Valves SIZE 1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

ØA 9.5 15.8 22.1 34.8 47.5 60.2 72.2 97.6 146.8

ØB 12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6 152.4

SIZE

ØA

ØB

DN25 DN38 DN51 DN63 DN76 DN104

22.5 25 35.4 38 48.0 51 60.2 63.5 72.1 76.1 100 104

D 34 34 34 38 40 40 41 44 57

ØE 79 79 79 85 105 112 125 157 214

L 61 61 61 64.3 74.3 77.6 84.8 101.7 138.9

øB

øA

C Type

øE

Width Range of Haitima Butterfly Valve-C&G Type Body: SS304.316.316L material out from precision CNC milling machined. Body can be changeable and low torque. BS. SMS. DIN 3A Weld End and Male/Male End and Clamp End. Disk: Out from full machined,high polished.Ra less than 0.6 µm. 9.5mm and 8 x 12mm , 12 x 12mm head for USA and Europe required. Electropolished and PTFE coating can be Required. Handle: Different nylon re-force and stainless steel handle gripper, pull, Press type. From 2 Position-12 Position, design for your wide range and beautiful choice.

NO.

Full Forged Butterfly Valves

DIN Weld/Weld Butterfly Valves SIZE DN28 DN34 DN40 DN50 DN65 DN85 DN104

ØA 25 31 37 49 66 81 100

ØB 28 34 40 52 70 85 104

D 34 38 38 40 41 42 44

ØE 79 85 90 105 125 137 157

L 61 64.3 74.3 77.6 84.8 91.6 101.7

PULL HANDLE 4 POSITION-P4

167

GRIPPER HANDLE 12 POSITION-G12

*1kgf-m = 9.8 N.m = 86.8 lbf-in = 7.23 lbf-ft

Fit Can fit

9.4 x 9.4 and

ø12 x 8 or

9.4 x 9.4 and

ø12 x 8 or

øC

øA

øE

øA

12 x 12

153

GRIPPER HANDLE 2 POSITION-G2

34.5

165

Can fit

9.4 x 9.4 and

ø12 x 8 or

12x12

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

3A Clamp/Clamp Butterfly Valves

12x12

PULL HANDLE-P4L

øB

øE

145

Fit

9.4 x 9.4 and

ø12 x 8 or

12 x 12

SIZE 1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

ØA 9.5 15.8 22.1 34.8 47.5 60.2 72.2 97.6 146.8

ØB 25.2 25.2 50.5 50.5 64.0 77.5 91.0 119.0 166.8

D 34 34 33 33 35 35 38 38 57

ØE 79 79 79 85 105 112 125 157 213

L 61 61 61 64.3 74.3 77.6 84.8 101.7 138.9

SMS Male/Male Butterfly Valves

SIZE DN25 DN38 DN51 DN63 DN76 DN104

ØA 22.5 35.4 48 60.2 72.1 100

C RD40x1/6 RD60x1/6 RD70x1/6 RD85x1/6 RD98x1/6 RD125x1/4

D 34 38 40 40 41 50

ØE 79 85 105 112 125 157

L 61 64.3 74.3 77.6 84.8 101.7

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Range of Butterfly Valve

Full Forged Butterfly Valves G Type

SIZE DN28 DN34 DN40 DN50 DN65 DN85 DN101.6 DN104

ØA 26 32 38 50 66 81 97.6 100

C 51.3 RD52x1/6 57.3 RD58x1/6 64.3 RD65x1/6 77.3 RD78x1/6 94.3 RD95x1/6 109 RD110x1/4 129 RD130x1/4 129 RD130x1/4

D 34 38 38 40 41 42 50 50

ØE 79 85 90 105 125 137 157 157

L 61 64.3 74.3 77.6 84.8 91.6 101.7 101.7

IDF Male/Male Butterfly Valves SIZE 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØA 22.4 35.1 47.8 60.5 72 97.6

DIN Weld/Weld Butterfly Valves DIN Male/Male Butterfly Valves

øA C

øB

øD

øB

øA

L øD

øA

øE

øA

øE

C Type

C 37.13x8T ACME 50.65x8T ACME 64.16x8T ACME 77.76x8T ACME 91.19x8T ACME 125.9x6T ACME

D 34 38 40 40 41 44

ØE 79 85 105 112 125 157

L 61 64.3 74.3 77.6 84.8 101.7

DIN Male / Male Butterfly Valves

SIZE

ØA

ØB

ØD

SIZE

ØA

ØB

ØD

DN25 DN32 DN40 DN50 DN65 DN85 DN100

26 32 38 50 66 81 100

29 35 41 53 70 85 104

20 21 25 25 25 30 32

87 92 97 110 127 142 162

61 64.25 66.7 74.3 84.75 91.6 101.75

DN25 DN32 DN40 DN50 DN65 DN85 DN100

26 32 38 50 66 81 100

51.3-RD52x1/6 57.3-RD58x1/6 64.3-RD65x1/6 77.3-RD78x1/6 94.3-RD95x1/6 109-RD110x1/4 129-RD130x1/4

32 32 36 36 38 50 52

87 92 97 110 127 142 162

61 64.25 66.7 74.3 84.75 91.6 101.75

RJT Male/Male Butterfly Valves ØA 22.1 34.9 47.6 60.3 73 97.6

C 45.72x8T WHIT 58.42x8T WHIT 72.72x6T WHIT 85.42x6T WHIT 98.12x6T WHIT 123.52x6T WHIT

D 34 38 40 40 41 50

SIZE

ØE 79 85 105 112 125 157

L 61 64.3 74.3 77.6 84.8 101.7

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØC

DIN Weld / Male Butterfly Valves SIZE 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØB

ØA

øF

øE

øA

øB

øD

øC

øE

øA

3 Piece G Type Butterfly Valves

øA

øE

øF

DIN Weld/Weld Butterfly Valves

øB

øD

DN25 26 29 DN32 32 35 DN40 38 41 DN50 50 53 DN65 66 70 DN85 81 85 DN100 100 104

20 21 25 25 25 30 32

87 26 51.3-RD52x1/6 32 61 92 32 57.3-RD58x1/6 32 64.25 97 38 64.3-RD65x1/6 36 66.7 110 50 77.3-RD78x1/6 36 74.3 127 66 94.3-RD95x1/6 38 84.75 142 81 109-RD110x1/4 50 91.6 162 100 129-RD130x1/4 52 101.75

SIZE

ØA

ØB

øC

DN25 DN32 DN40 DN50 DN65 DN85 DN100

26 32 38 50 66 81 100

29 35 41 53 70 85 104

87 92 97 110 127 142 162

90 90 100 100 100 136 136

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

174

Mix-Proof Butterfly Valve Series

ØE

ØA C D

Wine Weld/Male Butterfly Valves

ØA

ØB

ØE

SIZE

ØA

ØB

ØD

ØE

40 50 60 70 80 100

43 53 63 73 83 103

37 40 40 41 40 44

90 105 112 125 137 157

61 64.3 74.3 77.6 84.3 101.6

DN40/43 DN50/53 DN60/63 DN70/73 DN80/83 DN100/103

40 50 60 70 80 100

43 53 63 73 83 103

55x3 67x3 79x3.5 90x3.5 102x4 125x4

37 40 40 41 40 45

90 105 112 125 137 157

37 40 40 41 40 44

61 64.3 74.3 77.6 84.3 101.6

ØF

SIZE

DN40/43 DN50/53 DN60/63 DN70/73 DN80/83 DN100/103

ØA

Wine Weld/Weld Butterfly Valves

ØB

ØF

ØB

ØA ØB

ØE

Wine Butterfly Valves and Ball Valves

DIN SIZE

Inch ØA

ØB

ØF

SIZE

ØA

ØB

ØF

DN40 37 DN50 49 DN65 66 DN80 81 DN104 100

40 52 70 85 104

24 24 25 28 30

65 70 80 90

65 65 L 75 85 85

25 25 25 25 25

1.5" 2.0" 2.5" 3.0" 4.0"

37 40 49 52 66 70 81 85 100 104

24 24 25 28 30

65 70 80 90 110

65 65 75 85 85

25 25 25 25 25

110

ØF

ØC

ØB

ØA

E ØF

ØA

ØB

ØE

145

Wine Male/Flange Butterfly Valves

Wine Ball Valves Male/Flange

SIZE

ØA

ØB

ØE

SIZE

DN40/43 DN50/53 DN60/63 DN70/73 DN80/83 DN100/103

40 50 60 70 80 100

100 100 120 120 140 140

55x3 67x3 79x3.5 90x3.5 102x4 125x4

37 40 40 41 40 44

90 105 112 125 137 157

37 40 40 41 50 55

61 64.3 74.3 77.6 84.3 101.6

DN43 DN53 DN73

94 105 140

54.5 66.5 89.5

40 50 69

32.6 33 33

72 79 100

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

DIN SIZE

Inch ØB

ØF

SIZE

ØA

ØB

ØF

DN40 37 40 DN50 49 52 DN65 66 70 DN80 81 85 DN104 100 104

ØA

24 24 25 28 30

65 70 80 90 110

65 65 75 85 85

25 25 25 25 25

1.5" 2.0" 2.5" 3.0" 4.0"

37 40 49 52 66 70 81 85 100 104

24 24 25 28 30

65 70 80 90 110

65 65 75 85 85

25 25 25 25 25

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Manual and Auto Control Modulating Valve

Range Of Non Return Valve (Check Valve)

ØD

Range of Check Valve:

Materials Steel parts: Stainless steel SS316(L) Seal rings: EPDM Rubber or SILICONE / VITON Finish: OD≤0.8, ID≤0.8 or 0.4µm

ØB

Material grades Gasket - Body - EPDM / SILICONE / VITON / NBR / PTFE Flow Area - EPDM / SILICONE / VITON

Pneumatic Modulating Valve Type L ØA

ØB

ØD

1.0" 1.5" 2.0" 2.5" 3.0"

22.1 34.8 47.5 60.2 72.9

50.5 50.5 64 77.5 91

58.5 81.2 85.7 103.1 116.4

50.6 61 65.4 72.1 79.7

250 300 300 300 350

489 557 564 580 651

NO.

NAME

Short Body

Long Body

Clamp

13 PG

Seal-Ring

ST.ST Spring

Flow Support Plate

Disc

FLOW (GPM)

Note: For the diagram the following applies: Medium: Water(20ºC)

(PSI)

Bellow Sterile Valves

(fig. 3)

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Spring Check Valve Pressure Drop

ØA ØB

SIZE

Technical data Required different pressure for opening the valve fitted in a vertical pipe, as shown in fig. 3, the open pressure Max. product pressure: 1000kpa(10bar)

PRESSURE DROP (PSI)

ØA

Connections The valve is available with welding ends for tubes according to 3A, SMS, BS, DIN 11851.

SIZE

ØA

ØB

1.0" 1.5" 2.0" 2.5" 3.0"

22.1 34.8 47.5 60.2 72.9

50.5 50.5 64 77.5 91

58.5 81.2 85.7 103.1 116.4

50.6 61 65.4 72.1 79.7

1/2"

3/4"

1.0"

1.5"

2.0"

2.5"

3.0"

4.0"

0.5

3.0

1.6

0.6

1.3

0.8

0.9

Open Pressure

(fig. 1)

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Range Of Non-Return Valve

Range Of Hygienic Sight Glass

ØA

Check Valve Middle Flange/Weld END 3A/BS 1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØA 9.4 15.8 22.2 34.9 47.6 60.3 73 97.6

ØB 12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

DIN

ØA

ØB

DN25 DN32 DN40 DN50 DN65 DN100

25 31 37 49 66 100

28 34 40 52 70 104

SMS ØA

ØB

22.5 35.5 48.5 60.3 72.1 100

25 38 51 63.5 76.1 104

DN25 DN38 DN51 DN63 DN76 DN104

C 34 34 34 36 36 36 36 47

D 23 23 48 48 48 48 48 54

Glass:Clean,High Pressure Glass.Max Work 10 bar.Can be changeable. Body:SUS304,316,316L Precision Machined Body. With Width Connection End.3A,DIN,SMS,RJT,IDF Male/Male.Weld and Female End. Screw Blot:Full Stainless Steel. Seal:EPDM,Silicone and Viton.

ØB

ØA

ØB

Range Of Hygienic Sight Glass:

Check Valve Middle Flange/Clamp END 3A/BS 1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØA 9.5 15.9 22.1 34.8 47.5 60.2 72.9 97.6

ØB 25.2 25.2 50.5 50.5 64 77.5 91 119

SMS

ØA

ØB

DN25 DN38 DN51 DN63 DN76 DN104

22.5 35.5 48.5 60.3 72.1 100

50.5 50.5 64 77.5 91 119

C 39.5 39.5 34 36 36 36 36 47

D 28.5 28.5 48 48 48 48 48 54

NO. 1 2 3 4 5

PYREX Borosilicate Glass Composition

5 1

NAME Body High Pressure Clean Glass Screw Blot Nylon Lock Nut Seal

Contect

SiO2

80.9

AI2O3 Fe2O3 2.3

0.03

B2O3

Na2O

K2O

12.7

4.0

0.04

Check Valve Middle Clamp/Weld END 3A/BS 1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØA 9.5 15.8 22.1 34.8 47.5 60.2 72.9 97.6

ØB 12.7 19.05 25.4 38.1 50.8 63.5 76.2 119

DIN

ØA

ØB

SMS ØA

DN25 DN32 DN40 DN50 DN65 DN100

25 31 37 49 66 100

28 DN25 34 DN38 40 DN51 52 DN63 70 DN76 104 DN104

ØB

22.5 25 35.5 38 48.5 51 60.3 63.5 72.1 76.1 100 104

C 24 24 34 36 36 36 36 47

D 34 34 48 48 48 48 48 54

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØB

ØA

ØB

ØA

Physical Properties

ØA 9.5 15.8 22.1 34.8 47.5 60.2 72.9 97.6

ØB 25.2 25.2 50.5 50.5 64 77.5 91 119

6.4x105 kg/cm3

Poisson's ratio

0.20

Shear modules

2.7x105 kg/cm2

Knoop Hardness (100g)

418KHN

Bending strength

4~7x105 kg/cm2

Design stress (Safety factor)

67 kg/cm2

Check Valve Middle Clamp/Clamp END 3A/BS 1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

Young's module

DIN

ØA

ØB

DN25 DN32 DN40 DN50 DN65 DN100

25 31 37 49 66 100

50.5 50.5 64 77.5 91 119

SMS ØA

ØB

22.5 35.5 48.5 60.3 72.1 100

50.5 50.5 64 77.5 91 119

DN25 DN38 DN51 DN63 DN76 DN104

C D 28.5 39.5 28.5 39.5 34 48 36 48 36 48 36 48 36 48 47 54

2 1

NO. 1 2 3 4 5

NAME Body High Pressure Clean Glass Teflon Gasket NUT Seal

With Weld End Only!

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Range Of Hygienic Sight Glass

Sample Cock Valve

1/2PF

ØB

ØD

ØE

ØC

ØE

ØD

ØA

90 ØC

Upper Valves

SIZE

25 38 51 63.5 76 104

3A/BS Clamp End Sight-glass

ØC

ØD

ØE

SIZE

ØA

ØB

ØC

ØD

ØE

148 156 160 160 162 168

79 85 105 112 125 157

26 34 50 65 75.4 100

32 40 60 75 85 110

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

22.1 34.8 47.5 60.2 72.9 97.6

50.5 50.5 64 77.5 91 119

79 85 105 112 125 157

26 34 50 65 75.4 100

32 40 60 75 85 110

143 146 150 150 156 156

(1) PF Thread End (2) Welding Flange End

(2) Welding Ferrule End

Test Valves

ØC

Connecting End

109

1/2 PF

RJT, SMS, DIN, IDF-Male End Sight Class

Level Valves

100

109

ØD

1/2PF L

ØB

ØA

ØD

ØE

ØC

ØA

ØB

Sample Cock Valves

Weld End Sight-glass

SIZE

ØA

ØB

ØC

ØD

ØE

SIZE

ØA

ØB

ØC

ØD

ØE

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

9.4 15.75 22.1 34.8 47.5 60.2 72.9 97.6

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

47 47 79 85 105 112 125 157

10.2 17 26 34 50 65 75.4 100

15 22 32 40 60 75 85 110

106 106 148 156 160 160 162 167

DN65 DN80 DN100

66 80 98

73 93 113

112 127 148

66 82 100

25 29 31

48.5 52.5 60.5

A Type

Sample Cock Valves

SMS Weld End Sight-glass ØA

ØB

ØC

ØD

ØE

22.5 35.4 48 60.2 72 100

25 38 51 63.5 76 104

79 85 105 112 125 157

26 34 50 65 75.4 100

32 40 60 75 85 110

148 156 160 160 162 168

Ø4

SIZE

DN25 DN38 DN51 DN63.5 DN76 DN104

C Type

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

B Type

NPT 1/2 NPT 3/8-18 NPT 1/4-8

3A/BS Weld End Sight-glass

NPT 1/2 NPT 3/8-18 NPT 1/4-8

62 Ø25.2

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Pneumatic/Manual Diaphragm Valve 2WAY/Tank Bottom Valve

Hygienic Sample Valve for BPE

Pneumatic diaphragm valve Aspect design can be widely applied to the fields, such as pharmacy, beer, food, beverage, fluid equipment, cosmetic and so on. Control mode: Manual Type & Pneumatic Type Connection type: Clamp or Weld or other ... Operation: Normal Open & Normal Close design Body Material: 316L, Forged Or Casting . Connection: INCH: 1/2"~2", DIN / ISO: DN10-DN50 other size can be requirement Working temp: Assembling Diaphragm: EPDM(-40ºC ~110ºC, PTFE / EPDM(-10ºC~150ºC) Working pressure: Max 10 Bar Surface: Standard: OD / ID mirror polished. ID Ra< 0.5µm. OD- Sand Blasted or E/P or others, ID – Polishing to Ra<0.5µm(SF1) or E/P Finished Ra,0.38µm(SF4) can be required.

Materials:

Flow area: AISI 316L Other steel parts: AISI 316 Plug stem: AISI 316L Gasket for fiow area: EPDM/SILICON/VITION Other seals: NBR and EPDM Surface: Mirror/ satin /sand Blaste

Technical data:

7 4

Parts name

Material

Rotating Nut

SUS304/316(L)

Lucknut

SUS304/316(L)

Seal

EPDM

Body

SUS304/316(L)

Flow Supports

SUS304/316(L)

Spring

SUS304/316(L)

Bushing

SUS304/316(L)

Seal

EPDM

ØD F2

Parts List Q'TY

Item

L L1

3A 1/2" 3/4" 1.0" 1.5" 2.0"

ØA ØB 9.4 12.7 15.75 19.05 22.1 25.4 34.8 38.1 47.5 50.8

DIN DN10 DN20 DN25 DN32 DN40 DN50

ØC ØB ØA

ØE

G1 G2

ØC ØB ØA

Temperature range: Full vacuum. -10°Cto+140°C(EPDM).

L L1

ØA 10 20 26 32 38 50

ØC 25.2 25.2 50.5 50.5 64

BPE ØA ØB 1/2" 9.4 12.7 3/4" 15.75 19.05 1.0" 22.1 25.4 1.5" 34.8 38.1 2.0" 47.5 50.8

ØB 13 23 29 35 41 53

ØC 34 34 50.5 50.5 50.5 64

ØC 25 25 25/50.4 50.4 63.9

ØD

ØD 60 60 95 95 118

ØE 60 60 85 85 133

ØE 60 85 85 85 85 133

60 60 95 95 118

ØH

F1 122 212 212 217 217 315

F1 122 122 212 217 315

F2 131 131 225 232 333

F2 131 225 225 232 232 333

G1 74 74 100 119 135 G1 74 100 100 119 119 135

G2 83 83 113 134 153

L L1 124 88.9 135 101.6 141.2 114.3 168.4 139.7 190.5 158.8

G2 83 113 113 134 134 153

L 124 135 141.2 168.4 168.4 190.5

ØH

60 ØA

ØA

ØB ØC

7 G1

ØD

G2 F1 F2

ØA

ØE

Ø25.4

ØB 51

Clamp

Weld SIZE

ØA

ØB

1/2" 3/4" 1.0"

9.4 15.75 22.1

12.7 19.05 25.4

71.5 71.5 71.5

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

SIZE

ØA

A37 1/2" 3/4" 1.0"

34 25.2 25.2 50.5

70 70 70 70

SIZE

ØA

ØB

1/2" 9.4 12.7 3/4" 15.75 19.05 1.0" 22.1 25.4 1.5" 34.8 38.1 2.0" 47.5 50.8

ØC

ØD

ØE

ØH

25.2 25.2 50.5 50.5 64

60 60 95 95 118

60 60 85 85 133

122 122 212 217 315

131 131 225 232 333

74 74 100 119 135

83 83 113 134 153

100 100 120 160 160

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Pneumatic/Manual Diaphragm Valve 3WAY/U-Bend valve

Material:SUS304/SUS316L

P.D.Press(MPa):0.05~0.2 Types:Weld end/Clamp end/Male end/Female end

ØA

ØC ØB

Mesh:20~400 Aperture Size:1~10(mm) Øc Øb Øa

L1 L

Øa 9.4 15.75 9.4 15.75 22.1 9.4 15.75 22.1 15.75 9.4 15.75 22.1 34.8 47.5

Øb 12.7 19.05 12.7 19.05 25.4 12.7 19.05 25.4 19.05 12.7 19.05 25.4 38.1 50.8

Øc 25.2 25.2 25.2 25.2 50.5 25.2 25.2 50.5 50.5 25.2 25.2 50.5 50.5 64

L 117.4 117.4 117.4 117.4 136.4 117.4 117.4 151 161.4 117.4 117.4 151 176 195.4

L1 132 132 132 132 151 132 132 151 176 132 132 151 176 210

L2 58 61.18 64.35 64.35 81.25 70.7 70.7 94.9 101.9 77.05 77.05 101.5 115 121.7

L3 72 75 78 78 89 84.7 84.7 94.9 108 91 91 101.5 115 129

D1 74 74 74 74 100 74 74 100 119 74 74 100 119 135

D2 83 83 83 83 113 83 83 113 134 83 83 113 134 153

E1 122 122 122 122 212 122 122 212 217 122 122 212 217 315

Filter L Type

Filter I Type SIZE

1.0" 1.5" 2.0" 2.5" 3.0"

ØA

22.1 34.8 47.5 63.5 72.9

ØB

ØC

50.5 50.5 64 77.5 91

ØD

101.6 101.6 101.6 101.6 101.6

119 119 119 119 119

SIZE

410 410 410 450 550

1.0" 1.5" 2.0" 2.5" 3.0"

ØA 22.1 34.8 47.5 60.2 72.9

ØB 50.5 50.5 64 77.5 91

C 104.8 104.8 114.3 108 108

L 110 110 110 110 110

L1 310 310 310 410 490

ØC ØB ØA

L3 L4

ØA ØB

370

E2 131 131 131 131 225 131 131 225 232 131 131 225 232 333

ØA

ØC 25.2 25.2 50.5 50.5 50.5 50.5 50.5 50.5 50.5 64 64 64 64 64

ØB 12.7 19.05 25.4 25.4 25.4 38.1 38.1 38.1 38.1 50.8 50.8 50.8 50.8 50.8

ØA

ØA 9.4 15.75 22.1 22.1 22.1 34.8 34.8 34.8 34.8 47.5 47.5 47.5 47.5 47.5

ØB

SIZE

1/2"x1/2" 3/4"x3/4" 1.0"x1/2" 1.0"x3/4" 1.0"x1.0" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 1.5"x1.5" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x1.5" 2.0"x2.0"

ØB

E1(close) ; E2(open)

D1(close) ; D2(open)

Filter

Øa Øb Øc

ØB 25.4 38.1 50.8 25.4 38.1 50.8

ØC 50.5 50.5 64 50.5 50.5 64

Øa 9.4 9.4 9.4 15.75 15.75 15.75

Øb 12.7 12.7 12.7 19.05 19.05 19.05

Øc 25.2 25.2 25.2 25.2 25.2 25.2

L 196.8 214.2 298.4 196.8 214.2 298.4

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

L1 L2 52.4 65.1 87.3 74.6 103.2 115.9 52.4 65.1 87.3 74.6 103.2 115.9

Filter Y Type L3 64.35 70.7 77.05 64.35 70.7 77.05

L4 78 84.7 91 78 84.7 91

L5 11.55 15.8 18.35 11.55 15.8 18.35

D1 74 74 74 74 100 74

D2 83 83 83 83 113 83

Ø50.5

ØA 22.1 34.8 47.5 22.1 34.8 47.5

Ø22.1

SIZE

1/2"x1.0" 1/2"x1.5" 1/2"x2.0" 3/4"x1.0" 3/4"x1.5" 3/4"x2.0"

D1(close) ; D2(open)

SIZE

ØA

ØB

1.0" 1.5" 2.0" 2.5" 3.0"

22.1 34.8 47.5 60.2 72.9

50.5 50.5 64 77.5 91

121.5 188.3 214.6 265.6 270

200

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Kinds of Special Valve

Sanitary Standard Pressure Gauge

ØA ØB

Note: Sanitary pressure gauges are stainless steel products specifically designed to meet the demanding sanitary requirements for food dairy,beverage, pharmaceutical and biotech applications. Complies with 3A sanitary standard,water-proof, shock resistant, and closed structures, and are durable and accurate, good for long time running. All series are liquid-filled,and special materials movement and bourdon tube have lasting durability. It is applicable to systems with both strong fluctuation and non-corrosive fluids, such as air,water and oil.

psi

100

30 40

60 10 70 0 2 0 Kg/cm Lb/in2

psi

0 psi

200 3 0

500 60 0

100

400

D 50.6 61 65.4 78.6 79.7

22.1 34.8 47.5 60.3 72.9

C 58.5 81.2 86.1 103.1 116.4

1.0" 1.5" 2.0" 2.5" 3.0"

ØB 50.5 50.5 64 77.5 91

800 900

ØA

PG2

SIZE

PG1

For safety relief pressure. (Working pressure-0.1~7kgs/cm².) Relief Valve

Material:SUS304 or SUS316L. Forged or Solid Bar Body. Surface:Polished,Electric Polished. ID Ra<0.8um. or 0.4um. Can be made by your requirement design.

ØA

PT 1/4-19

SIZE Ø50 Ø63 Ø80 Ø100 Ø160

A 56 69 89 112 160

B 30 30 30 47 50

L 100 122 140 166 224

SIZE 1"&1-1/2" 2.0" 2-1/2" 3.0" 4.0"

D (Tri-clamp) 50.4 63.9 77.4 90.9 118.9

C ØA ØB

Relief out over-load air pressure for tank or pipe line. Air Release Valve SIZE

ØA

1.0" 1.5" 2.0"

22.1 34.8 47.5

ØB 50.5 50.5 64

C 82 82 82

For air get out of the pipe Line. Air Blow Valve SIZE

L 158 158 158

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Process connection : 1-1/2" ,2.0" ,2-1/2" Quick-release clamp piping system

ØA

1.0"/1.5"

2.0"

ØA 50.5 34.8

ØB 55 55

Suitable Pressure Ranges : 15psi to 600psi

Instrument Connection : 1/4"NPT /BSPT or 1/2"NPT /BSPT Case & Movement Mat'l): SS304

Bourdon Tube Mat'l : SS316

Connection Mat'l : SS316

Ferrule : SS304 (option : SS316)

Diaphragm : SS316

Lens : Safety Glass

Fill Fluid : Glycerined (Vegetable oil) Max temperature : standard →120ºC , special →150ºC

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Heavy Duty Clamp-ring(mm)

WING-NUT FOR CLAMP

ØB

ØA

ØB

42.5

42.2

43.8

39.2

ØA

35.6

ØA

39.5

(13MHH & 13MHHM & 13SF) 13MHH-10

13MHH-11

13MHH-12

13MHH-13

50 32.6

H17

SIZE

32.6

13SP-2

G1-M10

ØA

1/2"-3/4" 20 27.8 A37 44.4 1.5" 57.8 2.0" 71.4 2.5" 84 3.0" 99 3.5" 110 4.0" 123 4.5" 155.4 6.0" 205 8.0"

13MHHM Heavy Duty Double Pin Clamp

ØB

SIZE

ØA

ØB

28 37 53.6 67 80.6 94.2 109.2 122.2 133.2 170.4 220

1/2"-3/4" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0" 8.0"

20 43.6 57 70.6 84 112 155 205

28 53.6 67 80.6 94 122 170 220.8

ØB

ØA

13MHH Heavy Duty Sigle Pin Clamp

SIZE:1/2"~3/4"

13MHH-14

13MHH-8

13CS Double Pin Clamp

13MHP HIGH PRESSURE CLAMP WITH SCREW BOLT BRASS NUT SIZE 3/4" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0" 6.5" 10" 12"

ØA 20 43.32 56.44 69.54 77.56 108.86 158 173 258 309

ØB 28 52 65.5 79 92.5 120.5 170 186.2 272.8 327.6

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

13MHHS 3 PIECES CLAMP SIZE 1.5" 2.0" 2.5" 3.0" 4.0"

ØA 54 67.5 80.9 94 122.4

ØB 80 94 109 126 154

13IU Bolted Clamp SIZE

ØA

ØB

1.5" 2.0" 2.5" 3.0 4.0"

45 63 74 88 111

55 73 89 102 128

13SF Heavy Duty Double Pin Clamp SIZE

ØA

ØB

1/2"-3/4" A37 1.5" 2.0" 2.5" 3.0" 4.0"

20 27.5 45 59 67 85 114

28 42.9 53.6 72 84 98 127

ØB

20.58 28.34 27.2 37 41.02 53.52 54.5 44.5 54.54 67.04 57 68 68.02 80.52 81.52 94.02 84 95 99 110 109.54 122.04 112 123 123 134 159 144 157.6 175.1 172 187 207.4 225.9 222.5 237.5 257 272 308 323

ØB

3/4" DN10-20 1.5" DN25-40 2.0" DN50 2.5" 3.0" DN65 DN80 4.0" DN100 DN115 DN125 6.0" DN150 8.0" DN200 DN250 DN300

ØA

SIZE

13IS I-line Clamp ØA

ØB

1.0"~1.5" 44.4 2.0" 57.8 2.5" 71.4 3.0" 84 4.0" 110 6.0" 155.4

SIZE

53.4 72.2 88.1 102.4 127.8 195.3

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Ferrule Adapter (mm)

ØA ØB

ØC

14WI-Ferrule Male

ISO Ferrule

ØC

6.35 12.7 12.7 19.05 19.05 25.4 25 31.75 38.1 38.1 50.8 51 63.5 63.5 76.1 76.2 104 101.6 152.5 203.3 254 304.8

25 25 25.4 25 25.4 50.5 50.5 50.5 50.5 50.5 64 64 77.5 77.5 91 91 119 119 166.87 217.67 268.47 319.27

12.7 12.7 12.7 12.7 12.7 12.7

21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5

28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 or 38.1 28.6 or 38.1 28.6 or 38.1 28.6 or 38.1

12.7 12.7 12.7 12.7

12.7 15.8

ØC

DN8 DN12 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200

10.3 14 18.1 23.7 30.5 39.2 45.1 56.3 72.1 84.9 109.1 133.7 162.3 211.1

13.5 17.2 21.3 26.9 33.7 42.4 48.3 60.3 76.1 88.9 114.3 139.7 168.3 219.1

34 34 34 50.5 50.5 50.5 64 77.5 91 106 130 155 183 233.5

21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5

28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6

SIZE

ØA

ØB

ØC

ØD

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

22.1 34.8 47.5 60.2 72.89 97.38

25.65 38.35 51.05 63.75 76.45 101.85

31.5 44.2 56.9 69.6 83.82 109.14

50.67 50.67 67.05 84 98.3 123.7

19.84 23.8 26.19 29.36 30.94 34.11

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

22.1 34.8 47.5 60.2 72.89 97.38

25.65 38.35 51.05 63.75 76.45 101.85

31.88 44.58 57.28 69.98 84.2 109.6

50.67 50.67 67.05 84 98.3 123.7

19.84 23.8 26.19 29.36 30.94 34.11

1.0"

L 1.25"~4.0"

DIN Ferrule SIZE

14MPW Ferrule For Tank SIZE

ØA

ØB

ØC

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0" 8.0"

8.15 14.6 22.1 34.8 47.5 60.2 72.9 97.4 146.25 197.05

12.75 19.05 29.5 42.6 55.7 68.8 81.9 108.1 157.3 208.1

25.2 25.2 50.5 50.5 64 77.5 91 119 166.87 217.67

54 54 41.3 41.3 44.5 44.5 46.1 54 63.5 63.5

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØA

ØB

ØA

ØC

ØA ØB

ØB

3.9 9.4 9.7 15.75 15.95 22.1 22.5 28.45 34.8 35.5 47.5 48.5 60.2 60.5 72.9 72.9 100 97.4 146.86 197.66 247.2 298

ØB

ØC

ØA

1/4" 1/2" DN15 3/4" DN20 1" DN25 1.25" 1.5" DN38 2.0" DN51 2.5" DN63.5 DN76 3.0" DN104 4.0" 6.0" 8.0" 10" 12"

ØA

ØD

ØC

SIZE

ØC

ØB

14AMP

ØB

ØA

14WMP 14MMP

ØA

ØA ØB

3A/SMS

ØC

Welding Ferrule

15WI-Ferrule Female

SIZE

ØB

ØA

ØA ØB

ØC

ØA ØB

ØC

ØD ØC

1.0"~12" ØD ØC

1/2"~3/4"

Ferrule Adapter (mm)

DN10 DN15 DN20 DN28 DN34 DN40 DN52 DN70 DN85 DN101.6 DN104 DN125 DN150 DN200 DN250 DN300

DA ØA ØB 10 13 16 19 20 23 26 29 32 35 38 41 50 53 66 70 81 85 97.6 101.6 100 104 125 129 150 154 200 204 250 254 300 304

DB ØC ØA ØB 12 9 34 18 15 34 22 19 34 28 25 50.5 34 31 50.5 40 37 50.5 52 49 64 70 66 91 85 81 106 97.6 101.6 119 104 100 119 129 125 155 154 150 183 204 233.5 200 254 268.47 250 304 319.27 300

21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5

28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6

14WI-CAP Male

14RMP 3A-Recesless Ferrule

15WI-CAP Female

SIZE

ØA

ØB

SIZE

ØA

ØB

SIZE

ØA

ØB

ØC

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

31.5 44.2 56.9 69.6 83.82 109.14

50.67 50.67 67.05 84 98.3 123.7

12.37 12.37 14.11 18.72 19.32 19.32

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

31.88 44.58 57.28 69.98 84.2 109.6

50.67 50.67 67.05 84 98.3 123.7

12.75 12.75 17.66 18.77 19.37 19.37

1.0" 1.25" 1.5" 2.0" 2.5" 3.0" 4.0"

25.5 31.9 38.2 50.9 63.6 76.3 101.7

29.5 36.3 42.6 55.7 68.8 81.9 108.1

50.5 50.5 50.5 64 77.5 91 119

19.1 21.5 28.6 33.3 34.9 36.5 38.1

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØB1

NPT

ØC

22MP

ØA1

ØC ØB

NPT

ØA

ØB

ØA ØB

22MP

ØA NPT

21MP

B19W

1"-8"

ØA ØB

1/2"~3/4"

Ferrule Adapter (mm)

ØD NPT

Ferrule Adapter (mm)

13FG

ØA

ØB

SIZE

ØA

ØB

1/2" 3/4" A37 1.0" 1.2" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0" 8.0"

9.9 16.3 15.5 22.7 29.5 35.9 48.6 61.3 74 98.6 147.8 196.6

21.8 21.8 33 50 50.5 50 63.5 76.2 88.9 118 165 216

1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0" 10" 12"

22.8 35.8 48.8 60.5 73.1 97.8 148 249 300

52.7 52.7 66.2 79.7 93.2 121.2 169.1 270.7 321.5

ØC

SIZE

BLANK 16AMP 3A

14WHR

1.0" 1.5"

ØC

ØA ØB

4.0"

DN10 DN15 DN20 DN28 DN34 DN40 DN52 DN70 DN85 DN100

DN8 DN12 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80

DN125

DN100 DN125

DN150

DN200

6.0" 8.0" 10" 12"

14MPHR . 14WHR Hose Adapter SIZE

ØA

ØB

ØC

1/2"x1/2" 3/4"x3/4" 1.0"x1/2" 1.0"x3/4" 1.0"x1.0" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 1.5"x1.5" 2.0"x1.5" 2.0"x2.0" 2.5"x2.5" 3.0"x3.0" 4.0"x4.0"

9.5 15.8 9.5 15.8 20.6 9.5 15.8 20.6 33.2 33.2 46 58.7 72 97.6

13.7 21.4 13.7 21.4 25.4 13.7 21.4 25.4 38.1 38.1 50.8 63.5 76.2 101.6

25 25 50.5 50.5 50.5 50.5 50.5 50.5 50.5 64 64 77.5 91 119

38 38 38 38 43 38 38 43 43 43 58.7 59.5 78.6 85.5

25.3 25.3 25.3 25.3 30.3 25.3 25.3 25.3 30.3 30.3 46 46.8 65.9 72.8

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ISO

1/2"~3/4" A37

2.0" 2.5" 3.0"

14MPHR

DIN

21MP . 22MP

ØA

25 34 34 34 34 50.5 50.5 50.5 64 77.5 91 106 119 130 155 166.8 183 217.7 233.5 268.5 319.3

6 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 7.9 7.9 7.9 11.1 11.1 11.1 11.1 11.1 11.1

SIZE

ØB

Ferrule Gasket(EPDM,SILICON,VITON,PTFE) PLAIN TYPE 13PG Flang type 13FG

23BMP

NPT-1

13PG

15.8

B19W . 23BMP SIZE 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

ØA

ØB

ØC

22.1 25.4 50.5 34.8 38.1 50.5 47.5 50.8 64 60.2 63.5 77.5 91 72.9 76.2 97.4 101.6 119 146.9 152.4 166.8

NPT

NPT-1

44.5 1.0"-11.5T 1/2"-14T 44.5 1.5"-11.5T 3/4"-14T 46 2.0"-11.5T 3/4"-14T 58.7 2.5"-8T 3/4"-14T 63.5 3.0"-8T 3/4"-14T 65.1 4.0"-8T 3/4"-14T 76.2 6.0"-8T 3/4"-14T

1/2"x1/2" 3/4"x1/2" 3/4"x3/4" 1.0"&1.5"x1/4" 1.0"&1.5"x3/8" 1.0"&1.5"x1/2" 1.0"&1.5"x3/4" 1.0"&1.5"x1.0" 1.0"&1.5"x1.2" 1.0"&1.5"x1.5" 1.0"&1.5"x2.0" 2.0"x1/4" 2.0"x3/8" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x1.5" 2.0"x2.0" 2.0"x2.5" 2.0"x3.0" 2.0"x4.0" 2.5"x1.0" 2.5"x1.5" 2.5"x2.0" 2.5"x2.5" 2.5"x3.0" 2.5"x4.0" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 3.0"x3.0" 3.0"x4.0" 4.0"x1.0" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0" 4.0"x4.0" 6.0"x4.0"

ØA 9.4 15.75 15.75 3.18 6.35 9.7 15.75 22.1 28.6 34.8 47.5 3.18 6.35 9.4 15.75 22.1 34.8 47.5 60.2 72.9 97.6 22.1 34.8 47.5 60.2 72.9 97.6 22.1 34.8 47.5 60.2 72.9 97.6 22.1 34.8 47.5 60.2 72.9 97.6

ØA1 1.0" 1.5" 9.4 15.75

22.1 22.1 22.1

34.8 34.8 34.8

47.5

60.2

72.9

72.9 97.6

ØB 12.7 19.05 19.05 14 18 22 27 34 38.1 38.1 38.1 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 63.5 63.5 63.5 63.5 63.5 63.5 76.2 76.2 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6 101.6 101.6

ØB1

38.1 38.1 38.1 38.1 38.1

50.8 50.8

63.5 63.5 63.5

76.2 76.2 76.2

101.6 101.6 101.6 101.6 101.6

ØC

ØD

25 25 25 50.5 50.5 50.5 50.5 50.5 50.5 50.5 50.5 64 64 64 64 64 64 64 64 64 64 77.5 77.5 77.5 77.5 77.5 77.5 91 91 91 91 91 91 119 119 119 119 119 119 119

30 30

46 52 65

95 120

45 45 45 40 40 40 45 50 50 50 55 40 40 40 50 50 50 55 60 70 75 50 50 55 60 70 75 55 55 55 60 70 75 55 55 55 60 70 75 75

33 19 19 19 19 19 39 39 39 19 19 19 19 39

35 35 35 50

52 54

35 35 35 35 35

NPT 1/2"-18T 1/2"-18T 3/4"-18T 1/4"-18T 3/8"-18T 1/2"-14T 3/4"-14T 1.0"-11.5T 1.2"-11.5T 1.5"-11.5T 2.0"-11.5T 1/4"-18T 3/8"-18T 1/2"-14T 3/4"-14T 1.0"-11.5T 1.5"-11.5T 2.0"-11.5T 2.5"-8T 3.0"-8T 4.0"-8T 1.0"-11.5T 1.5"-11.5T 2.0"-11.5T 2.5"-8T 3.0"-8T 4.0"-8T 1.0"-11.5T 1.5"-11.5T 2.0"11.5T 2.5"-8T 3.0"-8T 4.0"-8T 1.0"-11.5T 1.5"-11.5T 2.0"-11.5T 2.5"-8T 3.0"-8T 4.0"-8T 4.0"-8T

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Tubing Hanger (mm) A

TH-2

TH-3 ØA

ØA

Type B

ØA

Type C

Type A

TH-5 Type A

1/2"

ØA

1.0"~6.0" L2

Ø19

SIZE

ØA

SIZE

ØA

ISO-21.3 ISO-26.9 ISO-33.7 ISO-42.4 ISO-48.3 ISO-60.3 ISO-88.9 ISO-114.3

21.3 26.9 33.7 42.4 48.3 60.3 88.9 114.3

68 74 82 93 101 114 149 177

SMS25 SMS38 SMS51 SMS63 SMS76 SMS104

25 38 51 63 76 104

74 87 105 117 133 165

1/2" 3/4" 1.0" 1.25" 1.5" 2.0" 2.5" 3.0" 4.0" 5.0" 6.0" 8.0"

Ø25

1/2" BSP

SIZE

ØA

ØC

NW20 NW25 NW32 NW40 NW50 NW65 NW80 NW100 NW125 NW150 NW200

22 28 34 40 52 70 85 104 129 154 204

10 10 10 10 10 10 10 10 12 12 12

61 64 67 70 76 85 92.5 102 114.5 127 152

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØA ØA1 ØC 12.7 19.05 25.4 25.5 31.75 38.1 38.1 50.8 50.8 63.5 63.5 76.2 76.1 101.6/104 101.6 129 152.4 154 204

10 84 90 10 87 90 10 90 90 10 76 90 10 85 90 10 92.5 90 10 102 90 12 114.5 12 127 145 12 152

79 79 79

83 83

SMS25 SMS38 SMS51 SMS63.5 SMS76 SMS104

46.5 49.5 52.5 58.5 67.5 75 83

22 31 49 82.5

175 247 290 515

ØA T

46.8 66 83 55 49.9 60 76 95 97.7 80 53 59.4 90 117.9 111.7 90 66.3 105 120 124 120 72.6 120 135.1 104.5 138 85.3 146 168.4 162 180 99 207 112 225 217 232 285 137

SIZE ØA ØA1 ØC 12/13 6 DIN10 18/19 8 DIN15 DIN20 22/23 8 25 45 61 DIN25 28 28/29 8 DIN32 34 34/35 10 38 51.5 76 DIN40 40 40/41 10 51 58 90 DIN50 52 52/53 12 70 12 63.5 64 106 DIN65 70 85 15 76.1 70.5 120 DIN80 85 104 84.5 152 DIN100 101.6 104 15 DIN125 129 18 DIN150 154 18 DIN200 204 DIN250 254 ØA

ØB ØC

TH-3(Type A .Type B .Type C). TH-5(Type A)

TH-5(Type B)

ØC

SIZE DN10~DN20 DN25~DN40 DN50~DN100 DN125~DN150

L 240 288 300 326 440 448

H1 67.5 70.5 72.5 75.5 78.5/79.5 81.5/82.5 88/89 98 105.5 116 127 140

ØB

BACK-UP FLANGE SIZE 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

ØA 27 39.7 52.4 65.1 77.8 103.2 154

ØB 79.4 98.4 120.7 139.7 152.4 190.5 241.3

14VB STUB END ØC 108 127 152.4 177.8 190.5 228.6 279.4

ØD 4-15.9 4-15.9 4-19.05 4-19.05 4-19.05 8-19.05 8-22.2

L 9.5 9.5 11.1 11.1 12.7 12.7 14.3

SIZE 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

ØA 25.4 38.1 50.8 63.5 76.2 101.6 152.4

ØB 50.8 73 92.1 104.8 127 157.2 215.9

T 1.65 1.65 1.65 1.65 1.65 2.1 2.77

L 41.3 44.5 38.1 50.8 57.2 66.7 76.2

ØA

H1 Ø19

ØC

ØA 51.8 66 80.4 93.2 106.3 121.5

TH-1.TH-4.TH-5(Type A .Type B).TH6 SIZE

TH-2

ØA

SIZE 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

1/2"~3/4"

H PP Sleeve(B)

TH-6

DIN SPANNER

RJT SPANNER

Rubber Grommets(A)

ØA

3/4"~6.0"

Type B

L Type C

ØA

TH-4

ØA 1

100

ØA

TH-1

Kinds of Parts

64 64 78 90 111 125 146

T ØA

16W CAP SIZE 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØA

25.4 38.1 50.8 63.5 76.2 101.6

1.65 1.65 1.65 1.65 1.65 2.1

19.1 14.2 19.1 25.4 31.8 38.1

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

DIN 11851 Unions ( mm ) DIN-13R

DIN 11851 Expanding / Imperial Unions ( mm )

DIN-13 Round Nut

DIN-14DA Welding Liner DIN-14DB Welding Liner

DIN-14 Welding Liner

DIN

ØA

ØC

Slots

DIN

ØA

ØB

ØC

DIN

ØA

ØB

ØC

SIZE ØA

ØB

ØC

10 15 20 25 32 40 50 65 80 90 100 125 150

19 25 31 36 42 49 62 80 94 104 115 138 164

RD 28x1/8 RD 34x1/8 RD 44x1/6 RD 52x1/6 RD 58x1/6 RD 65x1/6 RD 78x1/6 RD 95x1/6 RD110x1/4 RD120x1/4 RD130x1/4 RD160x1/4 RD190x1/4

38 44 54 63 70 78 92 112 127 138 148 178 210

15 15 17 18 18 18 19 21 25 26 26 30 34

18 18 21 21 21 21 22 25 30 30 31 35 40

4 4 4 4 4 4 4 6 6 6 6 6 6

10 15 20 25 32 40 50 60 65 80 100 125 150

10 16 20 26 32 38 50 57 66 81 100 125 150

13 19 23 29 35 41 53 61 70 85 104 129 154

22.5 28.5 36.5 44 50 56 68.5 76 86 100 121 150 176

17 17 18 22 25 26 28 30 32 37 44 34 37

10 15 20 25 32 40 50 60 65 80 100 125 150

12 9 15 18 19 22 25 28 31 34 37 40 49 52 57 61 66 70 81 85 100 104 125 129 150 154

22.5 28.5 36.5 44 50 56 68.5 76 86 100 121 150 176

17 17 18 22 25 26 28 30 32 37 44 34 37

10 10 16 15 20 20 25 26 32 32 40 38 50 50 57 60 66 65 81 80 101.6 99 104 100 125 125 150 150

15 21 25 31 37 43 55 63 72 87 104 106 132 157

22 28 36 44 50 56 68 76 86 100 121 121 150 176

17 17 18 22 25 26 28 30 32 37 44 44 34 37

DIN Welding Liner DIN14-T

ØA ØB

ØD

ØA ØB

ØD

ØB

ØA

ØD

DIN Expanding Liner DIN-14R DIN Short Welding Liner DIN-14E DIN Imperial Welding Liner DIN-14I DIN-14AHR Hose Adapter

ØA

ØB

ØD

SIZE

DN10 10 DN15 16 DN20 20 DN25 26 DN32 32 DN40 38 DN50 50 DN65 66 DN80 81 101.6 99 DN104 100

18 24 30 35 41 48 61 79 93 112 114

22 28 36 44 50 56 68 86 100 121 121

17 17 18 22 25 26 28 32 37 44 44

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150

SIZE

ØA ØB ØC

ØD

10 16 20 26 32 38 50 66 81 100 125 150

22 28 36 44 50 56 68 86 100 121 150 176

17 17 18 22 25 26 28 32 37 44 34 37

12.2 18.2 22.2 28.2 34.2 40.2 52.2 70.3 85.3 104.3 129.3 154.3

18 24 30 35 41 48 61 79 93 114 137 163

SIZE

ØA

DN10 9 DN15 15 DN20 19 DN25 25 DN32 31 DN40 37 DN50 49 DN65 66 DN80 81 DN100 100 DN125 125 DN150 150

ØB

ØD

12 18 22 28 34 40 52 70 85 104 129 154

22.5 28.5 36.5 44 50 56 68.5 86 100 121 150 176

SIZE

13 13 13 15 15 15 16 17 17 20 23.5 27

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØA

ØB

ØD

22.1 25.4 44 34.8 38.1 56 47.5 50.8 68 60.2 63.5 86 72.9 76.2 100 97.6 101.6 121

SIZE

22 26 28 32 37 44

DN25 DN32 DN40 DN50 DN65 DN80 DN100

ØA ØB

22.2 28.7 34 47 59 71.5 95

25 32.2 38 50.5 63.2 75.5 100.8

ØD

44 50 56 68 86 100 121

67 71 78 89 100 108 120

ØA ØB

ØA Ø8 Ø15

ØC

ØB

ØA ØB

ØD ØB

ØA

ØC

ØA

ØB

D L

45°

30°

45°

30°

ØC B

30°

ØC

ØD ØA

DIN-13RBN

10 16 20 26 32 38 50 57 66 81 89 100 125 150

RD 28X1/8 RD 34X1/8 RD 44X1/6 RD 52X1/6 RD 58X1/6 RD 65X1/6 RD 78X1/6 RD 85X1/6 RD 95X1/6 RD 110X1/4 RD 120X1/4 RD 130X1/4 RD 160X1/4 RD 190X1/4

21 21 24 29 32 33 35 36 40 45 54 54 46 50

10 15 20 25 32 40 50 60 65 80 90 100 125 150

13 19 23 29 35 41 53 61 70 85 93 104 129 154

SIZE ØA ØB

9 15 19 25 31 37 49 57 66 81 89 100 125 150

RD 28X1/8 RD 34X1/8 RD 44X1/6 RD 52X1/6 RD 58X1/6 RD 65X1/6 RD 78X1/6 RD 85X1/6 RD 95X1/6 RD 110X1/4 RD 120X1/4 RD 130X1/4 RD 160X1/4 RD 190X1/4

21 21 24 29 32 33 35 36 40 45 54 54 46 50

10 15 20 25 32 40 50 60 65 80 90 100 125 150

12 18 22 28 34 40 52 61 70 85 93 104 129 154

ØA

ØB

10 15 20 25 32 40 50 65 80 100 125 150

18 24 30 35 41 48 61 79 93 114 137 163

22 28 36 44 50 56 68 86 100 121 150 176

9 9 11 13 13 13 14 16 16 20 22 24

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØB

ØA

ØB

ØA

SIZE

DIN Seal Ring (EPDM,Silicon,Viton)

DIN-15 Welding Male

SIZE

ØA

ØB

SIZE ØA ØB

10 15 20 25 32 40 50 65 80 100 125 150

12 18 23 30 36 42 54 71 85 104 130 155

20 26 33 40 46 52 64 81 95 114 142 167

4.5 4.5 4.5 5 5 5 5 5 5 5 7 7

10 15 20 25 32 40 50 60 65 80 101.6 104 125 150

RD 28X1/8 RD 34X1/8 RD 44X1/6 RD 52X1/6 RD 58X1/6 RD 65X1/6 RD 78X1/6 RD 85X1/6 RD 95X1/6 RD 110X1/4 RD 130X1/4 RD 130X1/4 RD 160X1/4 RD 190X1/4

21 21 24 29 32 33 35 36 40 45 54 54 46 50

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØB

ØA

ØB

ØC

DIN Short Welding Male DIN-15E

DIN Expanding Male DIN-15R

ØA

ØB

SIZE

ØA

ØB

ØC

SIZE

ØA

ØB

DN10 10 DN15 16 DN20 20 DN25 26 DN32 32 DN40 38 DN50 50 DN65 66 DN80 81 101.6 99 DN104 100

18 24 30 35 41 48 61 79 93 112 114

RD 28X1/8 RD 34X1/8 RD 44X1/6 RD 52X1/6 RD 58X1/6 RD 65X1/6 RD 78X1/6 RD 95X1/6 RD 110X1/4 RD 130X1/4 RD 130X1/4

21 21 24 29 32 33 35 40 45 54 54

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150

12.2 18.2 22.2 28.2 34.2 40.2 52.2 70.3 85.3 104.3 129.3 154.3

18 24 30 35 41 48 61 79 93 114 137 163

10 16 20 26 32 38 50 66 81 100 125 150

RD28x1/8 RD34x1/8 RD44x1/6 RD52x1/6 RD58x1/6 RD65x1/6 RD78x1/6 RD95x1/6 RD110x1/4 RD130x1/4 RD160x1/4 RD190x1/4

21 21 24 29 32 33 35 40 45 54 46 50

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150

9 15 19 25 31 37 49 66 81 100 125 150

12 18 22 28 34 40 52 70 85 104 129 154

SIZE

15 21 25 31 37 43 55 63 72 87 104 106 132 157

DIN Welding Liner DIN15-T

10 16 20 26 32 38 50 57 66 81 99 100 125 150

SIZE

ØA

ØB

22.1 25.4 34.8 38.1 47.5 50.8 60.2 63.5 72.9 76.2 97.6 101.6

RD52 x 1/6 RD65 x 1/6 RD78 x 1/6 RD95 x 1/6 RD110 x 1/4 RD130 x 1/4

29 33 35 40 45 54

RD 28X1/8 17 RD 34X1/8 17 RD 44X1/6 19 RD 52X1/6 22 RD 58X1/6 22 RD 65X1/6 22 RD 78X1/6 23 RD 95X1/6 25 RD 110X1/4 25 RD 130X1/4 30 RD 160X1/4 35.5 RD 190X1/4 40

ØA ØB

DIN-14B Blanks

DIN Imperial Welding Male DIN15I

DIN-15DA Welding Male DIN-15DB Welding Male C

SIZE ØA ØB

ØB

ØA ØB

ØA

ØA ØB

DIN-15AHR Hose Adapter SIZE

DN25 DN32 DN40 DN50 DN65 DN80 DN100

ØA

ØB

22.2 25 28.7 32.2 38 34 47 50.5 59 63.2 71.5 75.5 95 100.8

RD52 x 1/6 RD58 x 1/6 RD65 x 1/6 RD78 x 1/6 RD95 x 1/6 RD110 x 1/4 RD130 x 1/4

69 73 80 90 108 116 128

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

DIN 11853-1 Unions Form A

DIN 11864-1 Unions Form A F

19 25 31 36 42 49 62 80 94 104 114 137 163

RD 28x1/8 RD 34x1/8 RD 44x1/6 RD 52x1/6 RD 58x1/6 RD 65x1/6 RD 78x1/6 RD 95x1/6 RD110x1/4 RD120x1/4 RD130x1/4 RD160x1/4 RD190x1/4

ØC L Slots

SIZE ØA ØB ØC ØD ØF L

38 44 54 63 70 78 92 112 127 138 148 178 210

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

18 18 20 21 21 21 22 25 29 30 31 35 40

4 4 4 4 4 4 4 6 6 6 6 6 6

10 16 20 26 32 38 50 66 81 100

13 19 23 29 35 41 53 70 85 104

18 24 30 35 41 48 61 79 93 114

10.1 21.9 16.1 27.9 20.1 35.9 26.1 42.9 32.1 48.9 38.1 54.9 50.1 66.9 66.1 84.9 81.1 98.9 100.1 118.9

DN8 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80

10.3 14 18.1 23.7 29.7 38.4 44.3 56.3 72.1 84.3

DIN/ISO/Imperial14 LINER Blank Cap

Imperial-14Liner

SIZE ØA ØB ØC ØD ØF L

17 17 18 22 25 26 30 34 38 46

13.5 17.2 21.3 26.9 33.7 42.4 48.3 60.3 76.1 88.9

18 24 30 35 41 48 61 79 93 114

10.4 21.9 14.1 27.9 18.2 35.9 23.8 42.9 29.8 48.9 38.5 54.9 44.4 66.9 56.4 84.9 72.2 98.9 84.4 118.9

SIZE

SIZE ØA ØB ØC ØD ØF L

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

17 17 18 22 25 26 30 34 38 46

9.4 12.7 15.75 19.05 22.1 25.4 34.8 38.1 47.5 50.8 60.2 63.5 72.9 76.2 97.38 101.6

18 24 35 48 61 79 93 114

9.45 21.9 15.8 27.9 22.15 42.9 34.85 54.9 47.55 66.9 60.25 84.9 72.95 98.9 97.43 118.9

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

17 17 22 26 30 34 38 46

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØC

ØF

18 24 30 35 41 48 61 79 93 114

21.9 27.9 35.9 42.9 48.9 54.9 66.9 84.9 98.9 118.9

9 9 10 12 13 13 14 16 16 20

DIN-14 LINER Form A

Din Round Nut Din-13R DIN ØA

19 25 31 36 42 49 62 80 94 104 114 137 163

10 15 20 25 32 40 50 65 80 90 100 125 150

RD 28x1/8 RD 34x1/8 RD 44x1/6 RD 52x1/6 RD 58x1/6 RD 65x1/6 RD 78x1/6 RD 95x1/6 RD110x1/4 RD120x1/4 RD130x1/4 RD160x1/4 RD190x1/4

ØA

ØC

ØF

ØC

ØA

ISO-14 Liner

ISO-14 LINER Form A

ØC L Slots

SIZE ØA ØB ØC ØD ØF L

38 44 54 63 70 78 92 112 127 138 148 178 210

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

18 18 20 21 21 21 22 25 29 30 31 35 40

4 4 4 4 4 4 4 6 6 6 6 6 6

10 16 20 26 32 38 50 66 81 100

13 19 23 29 35 41 53 70 85 104

18 24 30 35 41 48 61 79 93 114

10.1 21.9 16.1 27.9 20.1 35.9 26.1 42.9 32.1 48.9 38.1 54.9 50.1 66.9 66.1 84.9 81.1 98.9 100.1 118.9

Imperial-14 LINER Form A

SIZE ØA ØB ØC ØD ØF L

39 39 38 40 47 47 48 61 61 66

DN8 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80

10.35 14 18.1 23.7 29.7 38.4 44.35 56.35 72.15 84.35

13.5 18 17.2 24 21.3 30 26.9 35 33.7 41 42.4 48 48.3 61 60.3 79 76.1 93 88.9 114

10.4 14.1 18.2 23.8 29.8 38.5 44.4 56.4 72.2 84.4

21.9 27.9 35.9 42.9 48.9 54.9 66.9 84.9 98.9 118.9

SIZE ØA ØB ØC ØD ØF L

39 39 40 41 47 47 48 62 61 68

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

9.4 12.7 15.75 19.05 22.1 25.4 34.8 38.1 47.5 50.8 60.2 63.5 72.9 76.2 97.38 101.6

18 24 35 48 61 79 93 114

9.45 21.9 15.8 27.9 22.15 42.9 34.85 54.9 47.55 66.9 60.25 84.9 72.95 98.9 97.43 118.9

39 39 40 46.5 47.5 63 61 65

DIN Seal

ISO Seal

DIN ØA L

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

12 18 22 28 34 40 52 68 83 102

3.5 3.5 3.5 3.5 5 5 5 5 5 5

ØE

10 15 20 25 32 40 50 65 80 90 100 125 150

DIN-14 Liner

ØA ØB ØC

ØF

Din Round Nut Din-13R B

DIN ØA

ØB

ØF ØD

ØA

ØC

ØD

Imperial Seal

DIN ØA L

DN8 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80

12 16 20 26 32 40.5 46.5 58.5 73.5 86.5

DIN ØA L

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

3.5 3.5 3.5 3.5 5 5 5 5 5 5

12 18 24 37 50 62 75 100

3.5 3.5 3.5 5 5 5 5 5

ØF ØE

ØB

ØC

ØF

ØB

ØE

ØF

ØA ØB

ØE ØD

ØA

ØD

DIN Seal

ISO Seal

DIN ØA L

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

12 18 22 28 34 40 52 68 83 102

3.5 3.5 3.5 3.5 5 5 5 5 5 5

Imperial Seal DIN-15 Male

DIN ØA L

DN8 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80

12 16 20 26 32 40.5 46.5 58.5 73.5 86.5

3.5 3.5 3.5 3.5 5 5 5 5 5 5

DIN ØA L

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12 18 24 37 50 62 75 100

3.5 3.5 3.5 5 5 5 5 5

SIZE ØA ØB ØD ØE

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

10 16 20 26 32 38 50 66 81 100

13 10.1 22 19 16.1 28 23 20.1 36 29 26.1 43 35 32.1 49 41 38.1 55 53 50.1 67 70 66.1 85 85 81.1 99 104 100.1 119

ISO-15 Male L

SIZE ØA ØB ØD ØE

RD28x1/8 RD34x1/8 RD44x1/6 RD52x1/6 RD58x1/6 RD65x1/6 RD78x1/6 RD95x1/6 RD110x1/4 RD130x1/4

19 19 21 26 30 31 31 36 42 50

DN8 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80

10.3 14 18.1 23.7 29.7 38.4 44.3 56.3 72.1 84.3

13.5 17.2 21.3 26.9 33.7 42.4 48.3 60.3 76.1 88.9

10.4 14.1 18.2 23.8 29.8 38.5 44.4 56.4 72.2 84.4

22 28 36 43 49 55 67 85 99 119

RD28x1/8 RD34x1/8 RD44x1/6 RD52x1/6 RD58x1/6 RD65x1/6 RD78x1/6 RD95x1/6 RD110x1/4 RD130x1/4

19 19 21 26 30 31 31 36 42 50

SIZE ØA ØB ØD ØE

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

9.4 12.7 9.45 15.75 19.05 15.8 22.1 25.4 22.2 34.8 38.1 34.9 47.5 50.8 47.6 60.2 63.5 60.3 72.9 76.2 73 97.38 101.6 97.4

22 28 43 55 67 85 99 119

RD28x1/8 RD34x1/8 RD52x1/6 RD65x1/6 RD78x1/6 RD95x1/6 RD110x1/4 RD130x1/4

19 19 26 31 31 36 42 50

SIZE

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØB ØE

23 28 34 44 53 60 72 87 100 120

22 28 36 43 49 55 67 85 99 119

RD28x1/8 RD34x1/8 RD44x1/6 RD52x1/6 RD58x1/6 RD65x1/6 RD78x1/6 RD95x1/6 RD110x1/4 RD130x1/4

24 24 24 24 24 24 24 28 28 30

DIN/ISO/Imperial14 LINER Blank Cap SIZE

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØC

18 24 30 35 41 48 61 79 93 114

ØA ØB

DIN/ISO/Imperial15 MALE Blank Cap

Imperial-15 Male

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØF

21.9 27.9 35.9 42.9 48.9 54.9 66.9 84.9 98.9 118.9

DIN-15 Male Form A L

SIZE ØA ØB ØD ØE

9 9 10 12 13 13 14 16 16 20

DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100

10 16 20 26 32 38 50 66 81 100

13 10.1 22 19 16.1 28 23 20.1 36 29 26.1 43 35 32.1 49 41 38.1 55 53 50.1 67 70 66.1 85 85 81.1 99 104 100.1 119

ISO-15 Male Form A ØF

SIZE ØA ØB ØD ØE

RD28x1/8 RD34x1/8 RD44x1/6 RD52x1/6 RD58x1/6 RD65x1/6 RD78x1/6 RD95x1/6 RD110x1/4 RD130x1/4

41 41 43 43 48 48 48 60 64 64

DN8 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80

10.35 14 18.1 23.7 29.7 38.4 44.35 56.35 72.15 84.35

13.5 17.2 21.3 26.9 33.7 42.4 48.3 60.3 76.1 88.9

10.4 14.1 18.2 23.8 29.8 38.5 44.4 56.4 72.2 84.4

22 28 36 43 49 55 67 85 99 119

Imperial-15 Male Form A ØF

RD28x1/8 RD34x1/8 RD44x1/6 RD52x1/6 RD58x1/6 RD65x1/6 RD78x1/6 RD95x1/6 RD110x1/4 RD130x1/4

41 41 43 43 48 48 49 60 64 64

SIZE ØA ØB ØD ØE

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

9.4 12.7 9.45 22 15.75 19.05 15.8 28 22.1 25.4 22.15 43 34.8 38.1 34.85 55 47.5 50.8 47.55 67 60.2 63.5 60.25 85 72.9 76.2 72.95 99 97.38 101.6 97.43 119

ØF L RD28x1/8 41 RD34x1/8 41 RD52x1/6 43 RD65x1/6 48.5 RD78x1/6 48.5 RD95x1/6 60 RD110x1/4 64 RD130x1/4 64

DIN/ISO/Imperial15 MALE Blank Cap SIZE ØB ØE DN10 1/2" 23 22 DN15 3/4" 28 28 DN20 34 36 DN25 1.0" 44 43 DN32 53 49 DN40 1.5" 60 55 DN50 2.0" 72 67 DN65 2.5" 87 85 DN80 3.0" 100 99 DN100 4.0" 120 119

F RD28x1/8 RD34x1/8 RD44x1/6 RD52x1/6 RD58x1/6 RD65x1/6 RD78x1/6 RD95x1/6 RD110x1/4 RD130x1/4

L 24 24 24 24 24 24 24 28 28 30

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

SMS Long Weld/short Unions (mm)

RJT (BS) Unions (mm) RJT-13HBN

Slots

ØB

ØA

ØD

ØB

ØA

RJT-13R

SIZE

ØA

ØB

ØD

SIZE

ØA

ØB

ØD

19 22 23 24 28 30 31

DN25 DN38 DN51 DN63.5 DN76 DN101.6 DN104 DN104-B

22.5 35.5 48.5 60.5 72.9 97.6 100 98.5

25 38 51 63.5 76.1 101.6 104 102.5

35.5 55 65 80 93 118 118 127

15.5 16 17 17 19 19 19 19

DN25 DN38 DN51 DN63.5 DN76 DN101.6 DN104 DN104-B

22.5 35.5 48.5 60.5 72 97.6 100 98.5

25 38 51 63.5 76 101.6 104 102.5

35.5 55 65 80 93 118 118 127

8 8 9 9 10 12 12 12

SIZE

ØA

ØB

ØD

SIZE

7.5 9 10 10 11 11 11

DN25 DN38 DN51 DN63.5 DN76 DN104

22.2 34 47 59 71.5 95

25 38 50.5 63.2 75.5 100.8

35.5 55 65 80 93 118

60.5 72 82 95 97 109

DN25 DN38 DN51 DN63.5 DN76 DN101.6 DN104 DN104-B

ØA

ØB

25 22.5 38 35.5 51 48.5 60.5 63.5 72.9 76.1 97.6 101.6 100 104 98.5 102.5

RD40x1/6 RD60x1/6 RD70x1/6 RD85x1/6 RD98x1/6 RD125x1/4 RD125x1/4 RD132x1/6

19 23 23 27 27 30 30 35

ØA

ØB

25 DN25 22.5 38 DN38 35.5 51 DN51 48.5 DN63.5 60.5 63.5 DN76 72 76 DN101.6 97.6 101.6 DN104 100 104 DN104-B 98.5 102.5

RD40x1/6 RD60x1/6 RD70x1/6 RD85x1/6 RD98x1/6 RD125x1/4 RD125x1/4 RD132x1/6

18 21 21 23 23 26 26 26

SIZE

ØA ØB

ØA

Seal Ring L Type (EPDM, SILICON, VITON)

ØA

ØB

DN25 25.2 32 DN32 32.2 40 DN38 38.2 47.9 DN40 40.2 48 51.2 60.4 DN51 DN63.5 63.7 73.5 76.2 86.5 DN76 DN101.6 101.8 112.5 DN104 104.2 112.5

SMS-15AHR Hose Adapter

SIZE

ØA

ØB

ØC

SIZE

ØA

ØB

RD40x1/6 RD48x1/6 RD60x1/6 RD60x1/6 RD70x1/6 RD85x1/6 RD98x1/6 RD125x1/4 RD125x1/4

20 20 23 23 25 30 35 30 30

DN25 DN38 DN51 DN63.5 DN76 DN104

22.8 35.8 48.8 61 73.4 100.5

25.1 38.1 51.1 63.6 76.1 104

38.1 47.8 60.8 73.3 85.8 115.7

DN25 DN38 DN51 DN63.5 DN76 DN104

22.2 34 47 59 71.5 95

25 38 50.5 63.2 75.5 100.8

RD40 x1/6 RD60 x1/6 RD70 x1/6 RD85 x1/6 RD98 x1/6 RD125x1/4

64 79 89 102 105 120

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

5.3

Short Welding Male SMS-15S SMS Expanding Male 15R SIZE

ØB

ØC

ØB

ØA

ØB

4.1

ØA ØB

ØA

ØB

ØC

ØA

SIZE

ØA

4 4 6 6 8 8 10

28.5 33 50.8 65 79.4 92 104.8 130 184

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

18 14 9.6 20 23.1 16 22.2 25.4 41.3 34.8 38.1 54 47.5 50.8 66.7 60.2 63.5 79.4 72.9 76.2 92.1 97.6 101.6 117.5 148 152.4 169.1

ØB

ØC

SIZE

ØA

ØB

ØC

11.4 11.4 19.5 19.5 19.5 19.5 19.5 19.5 23.5

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.5 38.2 50.9 63.6 76.3 101.7

32.5 45.2 57.9 70.6 83.3 108.7

41.3 54 66.7 79.4 92.1 117.5

20 24 28 32 32 32

Long Welding Male SMS-15GL

U Type

RJT -14B Blanks

RJT Seal Ring RJT Expanding Male RJT-15R (EPDM, Silicon, Viton)

RJT Welding Male RJT-15

SIZE

ØA

ØB

ØC

SIZE

ØA

1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 104

37.8 40.5 53.2 65.9 78.2 104 104

32.5 45.2 57.9 70.6 83.3 108.7 108.7

41.3 54 66.7 79.4 92.1 117.5 117.5

9 9 9 9 9 9 9

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 104 6.0"

9.6 13.7 21.2 x10T WHIT 16.5 20 27.6 x10T WHIT 16.5 16 22.1 25.4 45.72 x8T WHIT 27 34.8 38.1 58.42 x8T WHIT 27 47.5 50.8 72.72 x6T WHIT 27 60.2 63.5 85.42 x6T WHIT 27 72.9 76.2 98.12 x6T WHIT 27 97.6 101.6 123.52 x6T WHIT 27 100 104 123.52 x6T WHIT 27 148 152.4 174.32x6T WHIT 24

ØB

O-Ring

ØA

3.5 5 5 5 5 6 6

23.5 23.5 23.5 23.5 23.5 23.5

Slots

ØB

35.5 55 65 80 93 118 128

58.5 74 85.5 98.5 111.6 138 197

16 16 22.2 22.2 22.2 22.2 22.2 22.2 24

ØA

32 48 60 73.5 86 112 116

19.6 x10 TPI WHIT 26.2 x10 TPI WHIT 42.266x8 TPI WHIT 54.966x8 TPI WHIT 67.92 x6 TPI WHIT 80.62 x6 TPI WHIT 93.32 x6 TPI WHIT 118.72 x6 TPI WHIT 169.52 x6 TPI WHIT

SMS-14AHR Hose Adapter C

14.5 21 33.45 46 58.67 71.4 84.1 109.7 163

ØC

ØB

DN25 DN38 DN51 DN63.5 DN76 DN104 DN104B

ØB

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

ØA

17 17 20 20 20 25 30 27 27

ØA

35.5 43.5 55 55 65 80 93 118 118

SIZE

RJT Welding Liner RJT-14 RJT Expanding Liner RJT-14R

SIZE

ØB

32 40 48 48 60 73.5 86 112.5 112.5

SMS-14B Blanks L

RJT-13 NUT

ØA

ØD

6" (23.5)

25.2 32.2 38.2 40.2 51.2 63.7 76.2 101.8 104.2

ØB

ØC

DN25 DN32 DN38 DN40 DN51 DN63.5 DN76 DN101.6 DN104

ØA

Ø16

22.2

ØA

SMS Expanding Line 14R SIZE

ØD

C L

51 60 74 84 100 114 138

Ø8 2

ØD

RD40x1/6 RD48x1/6 RD60x1/6 RD70x1/6 RD85x1/6 RD98x1/6 RD125x1/4

ØB

DN25 DN32 DN38 DN51 DN63.5 DN76 DN104

ØA

SIZE

19 22 23 24 28 30 31 31 31

ØA ØB

51 60 74 84 100 114 138 138 150

ØA

ØD

ØA

32 RD40x1/6 40 RD48x1/6 48 RD60x1/6 60.5 RD70x1/6 74 RD85x1/6 87 RD98x1/6 113 RD125x1/4 113 RD125x1/4 117 RD132x1/6

ØB

ØA

ØD

DN25 DN32 DN38 DN51 DN63.5 DN76 DN101.6 DN104 DN104-B

Long Welding Liner SMS-14GL Short Welding Liner SMS-14S

SMS Blank Nut 13RBN

ØB

SIZE

ØB

SMS Nut 6 Slots SMS-13R

F B

Ø8 Ø16

ØA

ØD

RJT-13H

ØA

ØD B

SIZE

ØA

1.0" 25.5 1.5" 38.2 2.0" 50.9 2.5" 63.6 3.0" 76.3 4.0" 101.7

ØB

SIZE

ØA

ØB

32.5 45.2 57.9 70.6 83.3 108.7

45.72x8T WHIT 58.42x8T WHIT 72.72x6T WHIT 85.42x6T WHIT 98.12x6T WHIT 123.52x6T WHIT

20 24 28 32 32 32

1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

33.3 46 58.7 71.4 84.1 109.5 162.6

6.6 6.6 6.6 6.6 6.6 6.6 6.6

3.2 3.2 3.2 3.2 3.2 3.2 3.2

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

IDF/JIS G3447 Unions (mm) IDF-13H

IDF-13R

Wine Unions

IDF-13HBN

30 30 30 30 30 30 34.9 34.9

1.0" 1.5" 2.0" 2.5" 3.0" R 4.0" H 4.0"

22.6 35.6 48.6 60.3 72.9 97.6 97.6

ØA

25.6 38.6 51.6 64.1 76.7 101.6 102.5

ØB

23 35.7 47.8 59.5 72.3

25.4 33.8 21.5 38.1 47 21.5 50.8 60.5 21.5 63.5 74 21.5 76.3 87.5 21.5 114.1 30 97.6 101.6 120.6 30

1.0" 1.5" 2.0" 2.5" 3.0" R 4.0" H 4.0"

ØB

ØC

25.5 38.2 50.9 63.6 76.3 101.7 101.7

29.2 42.7 56.2 69.9 82.6 108.4 111.1

33.8 47 60.5 74 87.5 114.1 120.6

20 20 25 30 30 30 30

Macon Blank Nut 4 Slots M-13RBN

SIZE

ØA

ØC

SIZE

ØC

DN33 DN43 DN53 DN63 DN73 DN83 DN103

37 47 57 67 77 90 112

39x11TPI WHIT M55xP3.0 M67xP3.0 M79xP3.5 M90xP3.5 M102xP4.0 M125xP4.0

50 70 80 95 106 118 139

25 25 25 25 25 25 25

DN33 DN43 DN53 DN63 DN73 DN83 DN103

39x11TPI WHIT M55xP3.0 M67xP3.0 M79xP3.5 M90xP3.5 M102xP4.0 M125xP4.0

50 70 80 95 106 118 139

25 25 25 25 25 25 26

ØA

Macon Liner 14 Hose Adapter SIZE

ØA

DN40 34/36.5 DN50 47 DN60 59 DN70 66.3 DN80 71.5

ØB

ØD

40 50.5 63.2 70 75.5

50.8 63 75 85 97

82 92 102 104 110

ØA ØB

1.5

Macon Nut 4 Slots M-13R

ØA

48 64 77 91 106 105 135 133

ØA

ØB

46 60 75 90 106 105 135 133

SIZE

34.34x8T ACME 47.86x8T ACME 61.37x8T ACME 74.88x8T ACME 88.4 x8T ACME 88.4 x8T ACME 115.41x8T ACME 122.05x6T ACME

ØC

IDF Expanding Liner IDF-14R

ØB

ØD

L 4

30.5 43.5 57 70.7 83.3 83.3 112 112

SIZE

JIS

ØA ØB

1.0" 1.5" 2.0" 2.5" 3.0" 3.0" 4.0" 4.0"

IDF ØA ØB

Ø13.5

F ØE ØD

ØA ØB

ØC1

ØD

ØC

Ø6.5

ØF ØE

ØA

IDF Welding Liner IDF-14

ØA

ØB

ØA ØB

ØC

SIZE

ØA

ØC B

Ø16

IDF-13 NUT

ØA ØB

ØC 2

Ø8

R H R

ØC

L ØA

ØC1 B

ØA

ØC B

L L

IDF-14B Blanks SIZE

1.0" 1.5" 2.0" 2.5" 3.0" R 4.0" H 4.0"

IDF Welding Male IDF-15

ØA

ØB

29.2 42.7 56.2 69.9 82.6 111.1 111.1

33.8 47 60.5 74 87.5 114.1 120.6

10.5 10.5 10.5 10.5 10.5 12.6 12.6

SIZE

1.0" 1.5" 2.0" 2.5" 3.0" R 4.0" H 4.0"

IDF JIS ØA ØB ØA ØB

22.1 25.4 23 25.4 37.13x8T ACME 34.8 38 35.7 38.1 50.65x8T ACME 47.5 51 47.8 50.8 64.16x8T ACME 60.2 63.5 59.5 63.5 77.76x8T ACME 72.9 76.2 72.3 76.3 91.19x8T ACME 97.6 101.6 118.2x8T ACME 97.6 102.5 97.6 101.6 125.9x6T ACME

1.0" 21.5 1.5" 21.5 2.0" 21.5 2.5" 21.5 3.0" 21.5 4.0" R 30 4.0" H 21.5

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØA

ØB

25.5 29.2 38 42.5 50.9 56.2 63.6 69.9 76.3 82.6 101.7 108.8 101.7 111.1

37.13x8T ACME 50.65x8T ACME 64.16x8T ACME 77.76x8T ACME 91.19x8T ACME 118.2 x8T ACME 125.9 x6T ACME

19.5 19.5 19.5 25 30 35 R 35 H

Macon Liner M-14

IDF Seal Ring

IDF Expanding Male IDF-15R SIZE

SIZE

ØA

ØB

1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 4.0"

23 36 49 60.7 73.2 98 98

32.5 46 59.5 73.2 86.5 113 119.6

Macon Male M-15

SIZE

ØA

ØB

ØD

ØE

ØF

SIZE

ØA

DN33 DN38 DN40/43 DN50/53 DN51 DN60/63 DN70/73 DN76 DN80/83 DN103

33.3 38.2 43.3 53.3 51.2 63.3 73.3 72 83.3 104.2

36 46 46.3 56.3 56 66.3 76.3 76 86.3 108

28 35.9 40 50 48.5 60 70 70 80 100

31.5 44.5 44.5 54.5 54.5 64.5 74.5 74.5 84.5 104.5

38 50 50 62.5 62.5 73.5 85 85 96 119

22 29 22 22 29 22 22 22 22 22

DN33 DN38 DN43 DN51 DN53 DN63 DN73 DN76 DN83 DN103

33.3 38.2 43.3 51.2 53.3 63.3 73.3 72 83.3 104.2

ØB ØD ØE

36.3 46 46.3 56 56.3 66.3 76.3 76 86.3 108

30 35.9 40 48.5 50 60 70 70 80 100

Macon Male 15AHR Hose Adapter F

32 40.5x11TPI WHIT M55xP3.0 45 M55xP3.0 45 M67xP3.0 55 M67xP3.0 55 M79xP3.5 66 M90xP3.5 76 M90xP3.5 76 M102xP4.0 86 106 M125xP4.0

22 30 22 30 22 22 22 22 22 22

SIZE

ØA

ØB

84 DN40 34/36.5 38 M55xP3.0 DN50 47 50.5 M67xP3.0 94 DN65 59 63.2 M79xP3.5 104 DN70 66.3 70 M90xP3.5 106 DN80 71.5 75.5 M102xP4.0 112

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

3A Unions (mm)

Wide Range Tube Line

3A-14A Long Weld Liner

ØA

ØB

ØC

ØF

SIZE

ØA

38.02 ACME 8TPI 51.54 ACME 8TPI 65.05 ACME 8TPI 78.56 ACME 8TPI 92.08 ACME 8TPI 120.14 ACME 6TPI

46 61.1 76.2 91.3 106.4 137.6

23 24.6 27 29.6 32.5 38.1

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

22.1 34.8 47.5 60.2 72.9 97.6

25.4 38.1 50.8 63.5 76.2 101.6

29.5 42.6 55.7 68.8 81.9 108.1

33.3 46.8 60.3 73.8 87.3 114.3

18.3 18.3 19.1 22.3 23.1 26.2

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

22.2 25.4 34.9 38.1 47.6 50.8 60.3 63.5 73 76.2 97.6 101.6

3A short Bevel Seat Weld Male 3A-15TRF

ØF

29.5 42.6 55.7 68.8 81.9 108.1

33.3 46.8 60.3 73.8 87.3 114.3

34.9 38.1 38.1 44.5 44.5 44.5

3A-15A Long Weld Male

3A-15R Recessless Male

SIZE

ØA

ØB

SIZE

ØA

ØB

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

22.1 34.8 47.5 60.2 72.9 97.6

25.4 38.1 50.8 63.5 76.2 101.6

37.13 ACME 8TPI 50.65 ACME 8TPI 64.17 ACME 8TPI 77.67 ACME 8TPI 91.19 ACME 8TPI 119.25 ACME 6TPI

18.3 18.3 19.1 22.2 23.1 26.2

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

22.1 34.9 47.6 60.2 73 97.6

25.4 38.1 50.8 63.5 76.2 101.6

37.13 50.65 64.16 77.67 91.19 119.25

ACME ACME ACME ACME ACME ACME

8TPI 8TPI 8TPI 8TPI 8TPI 6TPI

ØA ØB

3A-14R Recessless Liner SIZE

ØA

ØB

ØF

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.5 38.2 50.9 63.6 76.3 101.7

29.5 42.6 55.7 68.8 81.9 108.1

33.3 46.8 60.3 73.8 87.3 114.3

19.1 28.6 33.3 34.9 36.5 38.1

3A-16A

SIZE

ØA

ØB

SIZE

ØA

ØB

34.9 38.1 38.1 44.5 44.5 44.5

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.5 38.2 50.9 63.6 76.3 101.7

29.5 42.6 55.7 68.8 81.9 108.1

37.13 ACME 8TPI 50.65 ACME 8TPI 64.17 ACME 8TPI 77.67 ACME 8TPI 91.19 ACME 8TPI 119.25 ACME 6TPI

20.6 28.6 34.9 38.1 41.3 41.3

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

29.5 42.6 55.7 68.8 81.9 108.1

33.3 46.8 60.3 73.8 87.3 114.3

11.9 14.3 15.9 16.7 18.3 20.6

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØC

ØA L

ØB

ØA ØB

SIZE

ØA ØB

ØB

30.3 43.4 56.5 69.6 82.7 108.9

It can be equipped with different types or connection ends, as 45º/90º elbow ,tee ,concentric/ eccentric reducer....weld , clamp, unions.... Standard type:3A, SMS, DIN, BS, BPE...etc. Material: ASTM 304, 316, 316L Surface: 1) ID/OD polishing . 2) Only ID polishing . 3) Only OD polishing . 4) unpolished. Roughness: #400, #320, #240, #180.... Ra≤0.8µm, 0.6µm, 0.5µm, 0.4µm..... (Other surface finish can be ordered).

SIZE ØA

ØF

3A short Bevel Seat 3A Hexagonal Nut 3A-13H Weld Liner 3A-14PRF 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØA ØB ØC

ØF

ØA ØB

ØB ØC

ØA

ØF

ØA

ØC

Haitima tube fittings can be used for sanitary, pharmaceutical, vacuum...etc purposes.

Haitima Sanitary Tubes For Biochemistry, Pharmaceutical, Food...etc. Haitima Sanitary for food, and pharmaceutical industry Material: ASTM 304,304L,316L Spec: ASTM A269, A270. Surface & Roughness: 1. OD/ID Pickle (Ra≤1.0µm) 2. Polished: (1) ID Polished to 180Grit (Ra≤0.8µm). BPE SMS IDF 3A sanitary (2) ID Polished to 240Grit (Ra≤0.6µm). DIN 11850 standard standard standard standard (3) ID Polished to 320Grit (Ra≤0.5µm). SIZE O.D T SIZE O.D T SIZE O.D T SIZE O.D T SIZE O.D T (4) ID Polished to 420Grit (Ra≤0.4µm). 1/2" 12.7 1.65 25.4 1.65 25 1 1.0" 25.4 1.65 25 25 1.25 1.0" 25.4 1.2 (5) Electro polished: 28 1.5 (5-1). ID Electro polished Ra≤0.5µm). 32 32 1.25 1.25" 31.8 1.2 1 32 34 1.5 (5-2). ID Electro polished Ra≤0.38µm). 1.5" 38.1 1.65

38 1.25 1.5" 38.1 1.2

38.1 1.65

2.0" 50.8 1.65

51 1.25 2.0" 50.8 1.5

50.8 1.65

2.5" 63.5 1.65 63.5 63.5 1.5 2.5" 63.5 2 3.0" 76.2 1.65 76 76.1 1.6 3.0" 76.3 2 4.0" 101.6 2.11 104 104 2 4.0" 101.6 2

40 40 50 52

63.5 1.65 65 70 76.2 1.65 80 85 1.65 100 104 101.6 2.11

1 1.5 1 1.5 2 2 2

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

3A Pipe Line(mm) 45° Long Elbow

90° Short Bend

90° Long Bend

Cross

Concentric Reducer

Ød

ØD

45° Short Elbow

3A Pipe Line(mm)

T T

T ØD

ØD

C.2WK-45° Elbow

C.L2KS-45° Elbow

C.2WCL-90° Bend

C.9WWWW-Short Cross

C.L2S-90° Bend

SIZE

ØD

SIZE

ØD

SIZE

ØD

SIZE

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6 152.4

13.16 23.8 15.8 23.8 31.75 39.6 47.6 63.5 95.25

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.77

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6 152.4

30.2 30.2 30.2 41.3 58.7 76.2 93.7 122.2 158.2

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.80

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6 152.4

19.05 28.58 38.1 57.2 76.2 95.25 114.3 152.4 228.6

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.77

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0" 6.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6 152.4

45 60 52.4 74.6 103.2 131.8 160.3 211.1 292.1

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.80

Welding Tee

C.L9W-Long Cross

C.31-Concentric Reducer

SIZE

ØD

SIZE

ØD

SIZE

ØD

Ød

SIZE

ØD

Ød

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

57.2 84.2 104.8 119.0 131.8 174.6

28.6 42.1 52.4 59.5 65.9 87.3

1.65 1.65 1.65 1.65 1.65 2.10

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

95.2 114.4 152.4 152.4 165.2 196.8

47.6 57.2 76.2 76.2 82.6 98.4

1.65 1.65 1.65 1.65 1.65 2.10

3/4"x1/2" 1.0"x1/2" 1.5"x1/2" 2.0"x1/2" 1.0"x3/4" 1.5"x3/4" 1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.0" 2.5"x1.5" 2.5"x2.0"

19.05 25.4 38.1 50.8 25.4 38.1 38.1 50.8 50.8 63.5 63.5 63.5

12.7 12.7 12.7 12.7 19.05 19.05 25.4 25.4 38.1 25.4 38.1 50.8

50.8 50.8 101.6 152.4 25.4 76.2 50.8 101.6 50.8 152.4 101.6 50.8

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0" 6.0"x2.0" 6.0"x3.0" 6.0"x4.0"

76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 152.4 152.4 152.4

25.4 38.1 50.8 63.5 38.1 50.8 63.5 76.2 50.8 76.2 101.6

203.2 152.4 101.6 50.8 254 203.2 152.4 101.6 406.4 304.8 203.2

1.65 1.65 1.65 1.65 2.10 2.10 2.10 2.10 2.77 2.77 2.77

Long Reducing Tee Ød

45° Clamp Elbow

90° Clamp Bend

T L1

L1 SIZE

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

38.1 19.05 1.65 57.2 28.6 1.65 57.2 28.6 1.65 84.2 42.1 1.65 104.8 52.4 1.65 119.0 59.5 1.65 131.8 65.9 1.65 174.6 87.3 2.10

SIZE

ØD

C.7RW-Long Reducing Tee L1

1/2" 12.7 95.2 47.6 3/4" 19.05 95.2 47.6 1.0" 25.4 95.2 47.6 1.5" 38.1 114.4 57.2 2.0" 50.8 152.4 76.2 2.5" 63.5 152.4 76.2 3.0" 76.2 165.2 82.6 4.0" 101.6 196.8 98.4 6.0" 152.4 285.8 142.9

L L

C.7RWS-Short Reducing Tee

SIZE

ØD

Ød

SIZE

ØD

Ød

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.77

1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

38.1 50.8 50.8 63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6

25.4 25.4 38.1 38.1 50.8 38.1 50.8 63.5 50.8 63.5 76.2

114.3 152.4 152.4 152.4 152.4 165.1 165.1 165.1 196.8 196.8 196.8

54 60.30 63.50 69.85 82.55 76.20 88.9 82.55 101.6 95.25 95.25

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.10 2.10

1.5"X1.0" 2.0"X1.0" 2.0"X1.5" 2.5"X1.0" 2.5"X1.5" 2.5"X2.0" 3.0"X1.0" 3.0"X1.5" 3.0"X2.0" 3.0"X2.5" 4.0"X1.0" 4.0"X1.5" 4.0"X2.0" 4.0"X2.5" 4.0"X3.0"

38.1 50.8 50.8 63.5 63.5 63.5 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6

25.4 25.4 38.1 25.4 38.1 50.8 25.4 38.1 50.8 63.5 25.4 38.1 50.8 63.5 76.2

84.2 104.8 104.8 119 119 119 131.8 131.8 131.8 131.8 174.6 174.6 174.6 174.6 174.6

34.9 41.3 48.4 47.63 54.75 58.7 54.0 65.1 65.1 65.9 66.7 108.0 108.0 108.0 108.0

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1 2.1

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Ød

C.7W-Long Tee

ØD

C.7WWW-Short Tee

Eccentric Reducer

ØD

C.32-Eccentric Reducer SIZE

C.2KMP-45° Elbow

C.2CMP-90° Bend

ØD

Ød

SIZE

ØD

Ød

SIZE

ØD

SIZE

3/4"x1/2" 19.05 1.0"x1/2" 25.4 1.5"x1/2" 38.1 2.0"x1/2" 50.8 1.0"x3/4" 25.4 1.5"x3/4" 38.1 2.0"x3/4" 50.8 1.5"x1.0" 38.1 2.0"x1.0" 50.8 2.0"x1.5" 50.8 2.5"x1.0" 63.5 2.5"x1.5" 63.5

12.7 12.7 12.7 12.7 19.05 19.05 19.05 25.4 25.4 38.1 25.4 38.1

25.4 50.8 101.6 152.4 25.4 76.2 127 50.8 101.6 50.8 152.4 101.6

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

2.5"x2.0" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0" 6.0"x2.0" 6.0"x3.0" 6.0"x4.0'

63.5 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 152.4 152.4 152.4

50.8 25.4 38.1 50.8 63.5 38.1 50.8 63.5 76.2 50.8 76.2 101.6

50.8 203.2 152.4 101.6 50.8 254 203.2 152.4 101.6 406.4 304.8 203.2

1.65 1.65 1.65 1.65 1.65 2.10 2.10 2.10 2.10 2.77 2.77 2.77

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

28.5 36.5 44.45 52.3 60.3 76.2

1.65 1.65 1.65 1.65 1.65 2.10

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØD

12.7 41.3 19.05 41.3 25.4 50.8 38.1 69.9 50.8 88.9 63.5 107.95 76.2 127 101.6 168.2

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

90° Short Elbow

Equal Tee

SIZE

ØD

Ød

SIZE

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

63.5 120.6 120.6 139.8 177.8 177.8 190.6 228.4

31.75 60.3 60.3 69.9 88.9 88.9 95.3 114.2

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10

1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

38.1 50.8 50.8 63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6

25.4 25.4 38.1 38.1 50.8 38.1 50.8 63.5 50.8 63.5 76.2

69.85 88.9 88.9 88.9 88.9 95.25 95.25 95.25 114.2 114.2 114.2

66.68 73.0 76.2 82.55 95.25 88.9 101.6 95.25 114.3 107.95 107.95

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

57.2 84.2 104.8 119.0 131.8 174.6

16 22 29 35 41 54

1.65 1.65 1.65 1.65 1.65 2.10

L L

25.0 38.0 51.0 63.5 76.1 104

37.5 1.25 57.0 1.25 76.5 1.25 95.25 1.5 114.15 1.6 152.1 2.0

SMS 45 LB 45° Long Elbow DN

ØD

1.5 1.5 1.5 1.5 2.0 2.0

25 38 51 63.5 76 104

25.0 38.0 51.0 63.5 76.1 104

42.33 48.72 58.15 75.3 79.37 85.54

1.25 1.25 1.25 1.5 1.6 2.0

1.5 1.5 1.5 1.5 2.0 2.0

25 38 51 63.5 76 101.6 104

25.0 38.0 51.0 63.5 76.0 101.6 104

55 70 82 105 110 150 150

1.25 1.25 1.25 1.5 1.6 2.0 2.0

1.5 1.5 1.5 1.5 2.0 2.0 2.0

SMS ET Tee With Straight-End Ød

SMS CR SMS Concentric Reducer 8

T,T1

ØD

1.5"x1.0" 2.0"x1.5" 2.5"x2.0" 3.0"x2.0" 3.0"x2.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

38.1 50.8 63.5 76.2 76.2 101.6 101.6 101.6

25.4 42.1 38.1 52.4 50.8 59.5 50.8 65.9 63.5 65.9 50.8 117.5 63.5 117.5 76.2 117.5

22 29 35 41 41 54 54 54

C.9MP-Clamp Long Cross SIZE

ØD

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

120.6 139.8 177.8 177.8 190.6 228.4

60.3 69.9 88.9 88.9 95.3 114.2

1.65 1.65 1.65 1.65 1.65 2.10

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

L1 ØD

C.32-14MP Eccentric Reducer Clamp End C.31-14MP Concentric Reducer Clamp End SIZE

ØD

Ød

1.5"x1.0" 2.0"x1.5" 2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

38.1 50.8 63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6 101.6

25.4 38.1 38.1 50.8 38.1 50.8 63.5 38.1 50.8 63.5 76.2

76.2 76.2 127 76.2 177.8 127 76.2 282.5 231.7 180.9 130.1

Ød

ØD

T,T1

L DN ØD Ød T

25 38 51 63.5 76.1 104

1.5 1.5 1.5 1.5 2.0 2.0

110 140 164 210 220 300

25.0 38.0 51.0 63.5 76.1 104

T,T1

L DN

Ød L

SMS PC Welding Cross Without Straight-End

25.0 38.0 51.0 63.5 76.1 104

ØD T

T,T1 Ød

ØD

T,T1

ØD

Ød

SMS ER SMS Eccentric Reducer

C.7RWW W/O Straight end Reducing Tee SIZE

Ød

T,T1

ØD

L1 L

ØD

Ød

SMS PT Tee Without Straight-End

Eccentric Reducer

ØD

Concentric Reducer

ØD

Clamp Cross

SMS PRT Welding Reducing Tee Without Straight-End

Reducing Tee

SMS 90 LB 90° Long Elbow

1.25 1.25 1.25 1.5 1.6 2.0

ØD

25 38 51 63.5 76 104

T,T1

SIZE

ØD

T,T1

C.7WO Equal Tee W/O Straight end

C.7RMP-Reducing Long Tee Clamp End

C.7MP-Clamp Long Tee

T,T1

ØD

SMS 90 B 90° Short Elbow

T,T1

ØD

T,T1

Ød

90° Long Elbow

ØD T

ØD

Ød

45° Long Elbow

Reducing Tee

Clamp Tee

SMS Pipe Line (mm) L

3A Pipe Line(mm)

L1 L2

55 70 82 105 110 150

14.0 21.0 28.5 36.0 43.0 58.0

SIZE

38x25 51x25 51x38 63.5x25 63.5x38 63.5x51 76x25 76x38 76x51 76x63.5 104x51 104x63.5 104x76

ØD Ød

38.0 51.0 51.0 63.5 63.5 63.5 76.1 76.1 76.1 76.1 104 104 104

25.0 25.0 38.0 25.0 38.0 51.0 25.0 38.0 51.0 63.5 51.0 63.5 76.1

1.25 1.25 1.25 1.5 1.5 1.5 1.6 1.6 1.6 1.6 2.0 2.0 2.0

1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.25 1.50 1.60

46 68 47 92 70 44 92 68 47 117 94 74

39 57 39 74 57 39 92 74 57 39 95 78 60

38x25 51x25 51x38 63.5x25 63.5x38 63.5x51 76.1x25 76.1x38 76.1x51 76.1x63.5 104x25 104x38 104x51 104x63.5 104x76.1

ØD Ød

25.0 25.0 38.0 25.0 38.0 51.0 25.0 38.0 51.0 63.5 25.0 38.0 51.0 63.5 76.1

1.25 1.25 1.25 1.5 1.5 1.5 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.0 2.0

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

140 164 164 210 210 210 220 220 220 220 300 300 300 300 300

21.0 29.0 29.0 34.5 35.0 36.0 41.0 42.0 43.0 43.0 56.0 56.0 57.0 58.0 58.0

38.0 51.0 51.0 63.5 63.5 63.5 76.1 76.1 76.1 76.1 104 104 104 104 104

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

DIN Pipe Line (mm)

45° Long Elbow

90° Short Tube Bend 90° Long Tube Bend

Cross

Pull Tee

SIZE

ØD

SIZE

ØD

DN25 DN32 DN40 DN50 DN65 DN80 DN100

28 34 40 52 70 85 104

20 23 20 27 30 33 40

1.5 1.5 1.5 1.5 2.0 2.0 2.0

DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN100

22 28 34 40 52 70 85 101.6 104

40 50 55 60 70 80 90 152.4 100

1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN100

28 34 40 52 70 85 101.6 104

70 78 85 97 110 118 150 140

1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

SIZE

ØD

DN20 22 DN25 28 DN32 34 DN40 40 DN50 52 DN65 70 DN80 85 DN100 101.6 DN100 104

94 100 110 120 140 160 180 300 200

47 50 55 60 70 80 90 150 100

13 15.5 19 22 28.5 39.5 46.5 56 58

1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

SIZE

ØD

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

43.5 63.5 88.5 113.5 133.5 173.5

1.65 1.65 1.65 1.65 1.65 2.10

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

45 60 65 85 110 135 155 195

BS PRT Reducing Tee W/O Straight End L1

Ød

ØD

Ød

ØD

L SIZE

ØD

Ød

32x25 34 40x25 40 40x32 40 50x25 52 50x32 52 50x40 52 65x25 70 65x40 70 65x50 70 80x50 85 80x65 85 100x50 104 100x65 104 100x80 104

28 28 34 28 34 40 28 40 52 52 70 52 70 85

1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0

25 16.5 1.5 23 33 1.5 23 16.5 1.5 27 66 1.5 28 49.5 1.5 27 33 1.5 35 75 1.5 39 77 1.5 29 44 1.5 45 85 1.5 33 41.2 2.0 50 137.5 1.5 44 93.5 2.0 60 52.5 2.0

ØD

SIZE

ØD

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

87 127 177 227 267 347

43.5 63.5 88.5 113.5 133.5 173.5

1.65 1.65 1.65 1.65 1.65 2.10

BS ETL Long Tee ØD

1.0" 25.4 1.5" 38.1 2.0" 50.8 2.5" 63.5 3.0" 76.2 4.0" 101.6

130 170 220 270 310 390

65 85 110 135 155 195

1.65 1.65 1.65 1.65 1.65 2.10

ØD Ød

1.5"x1.0" 38.1 2.0"x1.0" 50.8 2.0"x1.5" 50.8 2.5"x1.0" 63.5 2.5"x1.5" 63.5 2.5"x2.0" 63.5 3.0"x1.0" 76.2 3.0"x1.5" 76.2 3.0"x2.0" 76.2 3.0"x2.5" 76.2 4.0"x2.0" 101.6 4.0"x2.5" 101.6 4.0"x3.0" 101.6

25.4 25.4 38.1 25.4 38.1 50.8 25.4 38.1 50.8 63.5 50.8 63.5 76.2

T ØD

ØD

BS PT L

SIZE

130 170 220 270 310 390

65 85 110 135 155 195

1.65 1.65 1.65 1.65 1.65 2.10

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

SIZE ØD

1.0" 25.4 1.5" 38.1 2.0" 50.8 2.5" 63.5 3.0" 76.2 4.0" 101.6

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10

ØD

25.4 87 38.1 127 50.8 177 63.5 227 76.2 267 101.6 347

127 177 177 227 227 227 267 267 267 267 347 347 347

22 29 29 35 35 35 41 41 41 41 55 55 55

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.10 2.10

1.65 1.65 1.65 1.65 1.65 2.10

13.8 19.9 27.6 34.9 40.9 54.7

Eccentric Reducer

Concentric Reducer

BS ETS Welding Tee

SIZE

Ød

ØD

T L1

T ØD

SIZE

DIN PT

1.65 1.65 1.65 1.65 1.65 2.10

DIN ET

30.2 41.3 58.7 76.2 93.7 122.2

Welding Tee

DIN Concentric Reducer DIN CR DIN ER

DIN Tee & Pull Tee

25.4 38.1 50.8 63.5 76.2 101.6

ØD

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

BS EC

BS 90 LB

BS 90 B

ØD

SIZE

ØD

Ød

DIN 90 LB

DIN 90 B

SIZE

ØD

BS 45 LB

ØD

DIN 45 LB

ØD

L T

DIN 90° Long Bend

Ød

DIN 90° Short Bend

DIN 45° Long Elbow

BS Pipe Line (mm)

BS CR

BS ER

SIZE

ØD

SIZE

ØD

1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.0" 2.5"x1.5" 2.5"x2.0" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

38.1 50.8 50.8 63.5 63.5 63.5 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6

25.4 25.4 38.1 25.4 38.1 50.8 25.4 38.1 50.8 63.5 38.1 50.8 63.5 76.2

29 53 41 82 64 40 110 81 55 41 135 106 76 53

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.10 2.10 2.10

1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.0" 2.5"x1.5" 2.5"x2.0" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

38.1 50.8 50.8 63.5 63.5 63.5 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6

25.4 25.4 38.1 25.4 38.1 50.8 25.4 38.1 50.8 63.5 38.1 50.8 63.5 76.2

35 54 36 76 66 35 112 78 66 44 122 97 73 77

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.10 2.10 2.10 2.10

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

AS Pipe Line (mm) 90° Long Bend

90° Short Bend

Reducing Tee &Equal Reducing Tee Ød AS RTL

Long Tee

AS RTP

Ød

ØD SIZE

ØD

SIZE

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0

1/2" 3/4" 1.0" 1 1/4" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.1 25.4 31.8 38.1 50.8 63.5 76.2 101.6

49.1 58.6 68.1 77.7 87.0 106.2 125.0 144.2 182.4

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0

1/2" 3/4" 1.0" 1 1/4" 1.5" 2.0" 2.5" 3.0" 4.0"

SIZE

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0

1/2" 12.7 3/4" 19.1 1.0" 25.4 1 1/4" 31.8 1.5" 38.1 2.0" 50.8 2.5" 63.5 3.0" 76.2 4.0" 101.6

98.2 117.2 136.2 155.4 174.0 212.4 250.0 288.4 364.8

49.1 58.6 68.1 77.7 87.0 106.2 125.0 144.2 182.4

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0

T L

AS ECS

1/2" 12.7 3/4" 19.1 1.0" 25.4 1 1/4" 31.8 1.5" 38.1 2.0" 50.8 2.5" 63.5 3.0" 76.2 4.0" 101.6

38.2 19.1 57.2 28.6 76.2 38.1 95.4 47.7 114.0 57.0 152.4 76.2 190.0 95.0 228.4 144.2 304.8 152.4

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0

AS CR Concentric Reducer

SIZE

AS ET L

22.05 28.4 28.4 34.75 34.75 41.1 41.1 41.1 53.8 53.8 53.8

AS ER Eccentric Reducer

9.35 12.55 15.7 18.9 22.05 28.4 34.75 41.1 53.8

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

SIZE

ØD

1/2" 12.7 3/4" 19.1 1.0" 25.4 1 1/4" 31.8 1.5" 38.1 2.0" 50.8 2.5" 63.5 3.0" 76.2 4.0" 101.6

ØD

80 80 80 80 80 80 80 95.3 80 95.3 114.3

T L2

SIZE

ØD

Short Cross

ØD

T ØD

ØD

AS EC Long Cross

AS PT

Short Tee/Equal Tee

ØD

12.7 19.1 19.1 28.6 25.4 38.1 31.8 47.7 38.1 57.0 50.8 76.2 63.5 95.0 76.2 114.2 101.6 152.4

Ød

30 30 30 30 30 30 30 30 30

160 160 160 160 160 160 160 190.5 160 190.5 228.6

12.7 19.1 25.4 31.8 38.1 50.8 63.5 76.2 101.6

Ød

25.4 25.4 38.1 38.1 50.8 38.1 50.8 63.5 50.8 63.5 76.2

ØD

1/2" 3/4" 1.0" 1 1/4" 1.5" 2.0" 2.5" 3.0" 4.0"

ØD

38.1 50.8 50.8 63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6

Ød

SIZE

AS ET

1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

AS 90 B

SIZE

ØD

AS 90 LB

AS ET

ØD

AS 45 LB

ØD

L1 L

L L

ØD

45° Long Elbow

AS Pipe Line (mm)

SIZE

ØD

98.2 49.1 117.2 58.6 136.2 68.1 155.4 77.7 174.0 87.0 212.4 106.2 250.0 125.0 288.4 144.2 364.8 182.4

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0

1/2" 3/4" 1.0" 1 1/4" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.1 25.4 31.8 38.1 50.8 63.5 76.2 101.6

38.2 57.2 76.2 95.4 114.0 152.4 190.0 288.4 304.8

19.1 28.6 38.1 47.7 57.0 76.2 95.0 144.2 152.4

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0

3/4"x1/2" 1.0"x1/2" 1.0"x3/4" 11/4 " x3/4" 11/4 "x1.0" 1.5"x3/4" 1.5"x1.0" 1.5"x11/4" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x11/4" 2.0"x1.5" 2.5"x1.0" 2.5"x11/4" 2.5"x1.5" 2.5"x2.0" 3.0"x1.0"

ØD

Ød

SIZE

ØD

Ød

19.1 25.4 25.4 31.8 31.8 38.1 38.1 38.1 50.8 50.8 50.8 50.8 50.8 63.5 63.5 63.5 63.5 76.2

12.7 12.7 19.1 19.1 25.4 19.1 25.4 31.8 12.7 19.1 25.4 31.8 38.1 25.4 31.8 38.1 50.8 25.4

19.1 25.4 25.4 31.8 31.8 38.1 38.1 38.1 50.8 50.8 50.8 50.8 50.8 63.5 63.5 63.5 63.5 76.2

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

3.0"x11/4" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.0" 4.0"x11/4" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0" 5.0"x2.0" 5.0"x3.0" 5.0"x4.0" 6.0"x2.0" 6.0"x2.5" 6.0"x3.0" 6.0"x4.0" 6.0"x5.0"

76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6 101.6 127.0 127.0 127.0 152.4 152.4 152.4 152.4 152.4

31.8 38.1 50.8 63.5 25.4 31.8 38.1 50.8 63.5 76.2 50.8 76.2 101.6 50.8 63.5 76.2 101.6 127.0

76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6 101.6 127.0 127.0 127.0 152.4 152.4 152.4 152.4 152.4

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

High Purity Tube & Fitting Valve (ASTM BPE Standard)

BPE Pipe Line (mm)

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

øD ØD

Ra Reading for Fitting

0.5 0.63 0.76

øD 12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

95.2 47.5 101.6 50.8 108 53.85 120.6 60.2 73 146 158.8 79.25 171.4 85.6 209.6 104.65

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

BPE-31 Concentric & BPE-32 Eccentric Reducer T L

øD

SEMI-CONDUCTOR/MICRO-ELECTRONICS

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ød

Outer surface: Tubes and fittings Ra≤ 32uin (0.8µm)

Our Vacuum and semiconductor fitting include: Clamp-Aluminum and Stainless steel and claw clamp are available. Flange-KF, ISO specification. Reducer-Blank flange and all of Elbow, Tee, Reducer. Ra≤0.4um by machine and polished can be provided on request. We also can offer Electro-polished and blasted surfaces. So far our products have been successfully promoted to Germany, U.K, Japan and local building projects based on our flexible production ability and strict quality control.

SIZE

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

BPE-7RW Reducing Tee

Mechanically Polished and Electropolished Surface Ra Average Designation µ-in µ-m 0.38 15 SF4 0.5 20 SF5 0.63 25 SF6

Haitima developed our semiconductor, vacuum pipe fitting and components step by stepby means of good produce techniques experience of sanitary pipe fitting and valve.

57.15 57.15 57.15 63.5 76.2 85.6 91.95 114.3

ød

µ-m

20 25 30

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

ød

µ-in

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

Ra Average

SIZE

øD

Surface Designation SF1 SF2 SF3

DT-9

øD

Mechanically polished

øD

DT-8 76.2 1.65 12.7 19.05 76.2 1.65 76.2 1.65 25.4 38.1 95.25 1.65 50.8 120.65 1.65 63.5 139.7 1.65 76.2 158.75 1.65 101.6 203.2 2.1

Mechanically Polished and Electropolished or Electropolished Surface Ra Average Designation µ-in µ-m 0.38 15 SF4 0.5 20 SF5 0.63 25 SF6

As drawing and / or mechanically polished Surface Ra Average Designation µ-in µ-m 0.5 20 SF1 0.63 25 SF2 0.76 30 SF3

T øD

L T

SIZE

Ra Reading for Tubing

DT-7

MTR certificate will be offered. Surface options:

BPE-7W Tee & 9W Cross

BPE-2KS 45º Elbow

BPE-2S 90º Elbow

Pharmaceutical/Biotechnology fitting. Haitima have over 15 years hygienic fitting experiences for developing out the ASME bioprocessing equipment (BPE) standard tube, fitting, valve components for high purity application such as water for injection, pharmaceutical, Cosmetics use. Material: low sulphur ASTM SS316L , S: ≤ 0.005%~0.017%,

DT-10 SIZE

ØD

Ød

SIZE

ØD

Ød

3/4"x1/2" 1.0"x1/2" 1.0"x3/4" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x1.5" 2.5"x1/2" 2.5"x3/4" 2.5"x1.0"

19.05 25.4 25.4 38.1 38.1 38.1 50.8 50.8 50.8 50.8 63.5 63.5 63.5

12.7 12.7 19.05 12.7 19.05 25.4 12.7 19.05 25.4 38.1 12.7 19.05 25.4

101.6 108 108 120.6 120.6 120.6 145.8 145.8 145.8 145.8 158.5 158.5 158.5

50.8 53.85 53.85 60.2 60.2 60.2 66.55 66.55 66.55 66.55 72.9 72.9 72.9

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

2.5"x1.5" 2.5"x2.0" 3.0"x1/2" 3.0"x3/4" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.0" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

63.5 63.5 76.2 76.2 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6

38.1 50.8 12.7 19.05 25.4 38.1 50.8 63.5 25.4 38.1 50.8 63.5 76.2

158.8 158.8 171.2 171.2 171.2 171.2 171.2 171.2 209.3 209.3 209.3 209.3 209.3

73 73 79.25 79.25 79.25 79.25 79.25 79.25 91.95 91.95 98.3 98.3 98.3

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1 2.1

DT-11

SIZE

ØD

Ød

3/4"x1/2" 1.0"x1/2" 1.0"x3/4" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x1.5"

19.05 25.4 25.4 38.1 38.1 38.1 50.8 50.8 50.8 50.8

12.7 12.7 19.05 12.7 19.05 25.4 12.7 19.05 25.4 38.1

101.6 114.3 101.6 139.7 127 127 196.85 184.25 184.25 133.35

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

SIZE

ØD

Ød

2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6 101.6

38.1 50.8 38.1 50.8 63.5 38.1 50.8 63.5 76.2

184.25 139.7 235 190.5 139.7 342.9 299.7 247.7 196.85

1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

BPE Pipe Line (mm)

SIZE

1/2" 12.7 76.2 41.15 1.65 3/4" 19.05 76.2 41.15 1.65 1.0" 25.4 76.2 50.8 1.65 1.5" 38.1 95.25 69.85 1.65 2.0" 50.8 120.65 88.9 1.65 2.5" 63.5 139.7 107.95 1.65 3.0" 76.2 158.75 127 1.65 4.0" 101.6 203.2 168.15 2.1

ØD L

L1 T

1/2" 12.7 57.15 25.4 1.65 3/4" 19.05 57.15 25.4 1.65 1.0" 25.4 57.15 28.45 1.65 1.5" 38.1 63.5 36.8 1.65 2.0" 50.8 76.2 44.45 1.65 2.5" 63.5 85.6 52.32 1.65 3.0" 76.2 91.95 60.45 1.65 4.0" 101.6 114.3 79.25 2.1

SIZE

ØD

Ød

3/4"x1/2" 1.0"x1/2" 1.0"x3/4" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x1.5" 2.5"x1/2" 2.5"x3/4" 2.5"x1.0"

19.05 25.4 25.4 38.1 38.1 38.1 50.8 50.8 50.8 50.8 63.5 63.5 63.5

12.7 12.7 19.05 12.7 19.05 25.4 12.7 19.05 25.4 38.1 12.7 19.05 25.4

50.8 53.84 53.84 60.2 60.2 60.2 72.9 72.9 72.9 72.9 79.25 79.25 79.25

25.4 28.6 28.6 34.9 34.9 34.9 41.3 41.3 41.3 41.3 47.6 47.6 47.6

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

2.5"x1.5" 2.5"x2.0" 3.0"x1/2" 3.0"x3/4" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.0" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

63.5 63.5 76.2 76.2 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6

38.1 50.8 12.7 19.05 25.4 38.1 50.8 63.5 25.4 38.1 50.8 63.5 76.2

79.25 79.25 85.6 85.6 85.6 85.6 85.6 85.6 104.65 104.65 104.65 104.65 104.65

47.6 47.6 53.65 53.65 53.65 53.65 53.65 53.65 66.55 66.55 66.55 66.55 66.55

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1 2.1

BPE-2CMP 90º Clamp Elbow

øD ØD

SIZE

ØD

SIZE

ØD

Ød

SIZE

ØD

Ød

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

25.4 25.4 28.4 36.58 44.45 52.32 60.45 79.25

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

114.3 114.3 114.3 152.4 152.4 190.5 228.6 304.8

76.2 76.2 76.2 114.3 127 146.1 165.1 215.9

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

3/4"x1/2" 1.0"x1/2" 1.0"x3/4" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.0" 2.5"x1.5"

19.05 25.4 25.4 38.1 38.1 38.1 50.8 50.8 63.5 63.5

12.7 12.7 19.05 12.7 19.05 25.4 25.4 38.1 25.4 38.1

63.5 66.7 66.7 73 73 73 85.7 85.7 92.1 92.1

63.5 66.7 66.7 73 73 73 79.4 79.4 85.7 85.7

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

2.5"x2.0" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.0" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

63.5 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6

50.8 25.4 38.1 50.8 63.5 25.4 38.1 50.8 63.5 76.2

92.1 98.4 98.4 98.4 98.4 120.7 120.7 120.7 120.7 120.7

85.7 92.1 92.1 98.4 98.4 104.8 104.8 111.1 111.1 111.1

1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1 2.1

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

47.6 50.8 54 60.2 72.9 79.25 85.7 104.8

25.4 28.44 28.44 34.8 41.15 47.5 53.85 69.85

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

øD

L L1

øD

DT-16

SIZE

ød

DT-15

BPE-31-14MP Concentric & BPE-32-14MP Eccentric Reducer

BPE-7RMP Clamp Reducing Tee

øD

DT-18

SIZE

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

SIZE

ØD

41.15 41.15 50.8 69.85 88.9 107.95 127 168.15

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

SIZE

BPE-7MP Clamp Tee & BPE-9MP Cross T

BPE-Equal Outlet Weld / Clamp Tee

Ød

DT-19

114.4 120.6 133.4 146 171.4 182.2 196.8 241.4

57.2 60.2 66.55 72.9 85.6 91.95 98.3 120.65

ød

ØD

DT-23

øD

SIZE

DT-17

DT-14

DT-13 ØD L

øD

SIZE

øD

DT-12

øD

ød

øD

BPE-Reducing Tee Clamp End

ød

L T

øD

BPE-180º U-Joint Weld

BPE-2KMP 45º Clamp Elbow

BPE-Short Outlet Weld / Clamp Reducing Tee

ød

BPE-45º Weld / Clamp Elbow

BPE-90º Weld / Clamp Elbow

BPE Pipe Line (mm)

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

DT-21

DT-20 SIZE

3/4"x1/2" 1.0"x1/2" 1.0"x3/4" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.0" 2.5"x1.5"

ØD Ød

19.05 25.4 25.4 38.1 38.1 38.1 50.8 50.8 63.5 63.5

12.7 12.7 19.05 12.7 19.05 25.4 25.4 38.1 25.4 38.1

63.5 66.7 66.7 73 73 73 85.7 92.1 92.1 92.1

25.4 28.6 28.6 34.9 34.9 34.9 47.6 47.6 47.6 47.6

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

SIZE

2.5"x2.0" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.0" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

ØD Ød

63.5 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6

50.8 25.4 38.1 50.8 63.5 25.4 38.1 50.8 63.5 76.2

92.1 98.4 98.4 98.4 98.4 120.7 120.7 120.7 120.7 120.7

47.6 54 54 54 54 66.7 66.7 66.7 66.7 66.7

SIZE

1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1 2.1

3/4"x1/2" 1.0"x1/2" 1.0"x3/4" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x1.5"

ØD

Ød

19.05 12.7 25.4 12.7 25.4 19.05 38.1 12.7 38.1 19.05 38.1 25.4 50.8 12.7 50.8 19.05 50.8 25.4 50.8 38.1

SIZE

ØD

Ød

50.8 63.5 50.8 88.9 76.2 76.2 139.7 127.0 127.0 76.2

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6 101.6

38.1 50.8 38.1 50.8 63.5 38.1 50.8 63.5 76.2

127 76.2 177.8 127.0 76.2 282.6 231.8 181.0 130.2

1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

øD

ØD

SIZE

ØD

SIZE

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

114.3 114.3 114.3 114.3 152.4 190.5 228.6 304.8

88.9 88.9 88.9 127.0 139.7 158.8 177.8 231.8

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

22.2 25.4 28.6 34.9 41.3 47.6 54.0 69.9

47.6 50.8 54.0 60.3 73.0 79.4 85.7 104.8

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6

114.4 120.6 133.4 146.0 171.4 184.2 196.8 241.4

25.4 28.6 28.6 34.9 41.3 47.6 54.0 69.9

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1

BPE-Instrument Tee Weld / Clamp End ød L1

øD

øA

øD

DT-22 SIZE

ØA

ØB

ØD

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

9.4 15.7 22.1 34.8 47.5 60.2 72.9 97.4

12.7 19.1 25.4 38.1 50.8 63.5 76.2 101.6

25 25 50.5 50.5 64 77.5 91 119

12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.9

28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7

44.5 44.5 44.5 44.5 57.2 57.2 57.2 57.2

SIZE

1/2" 3/4" 1.0" 1 1/2" 2.0" 2 1/2" 3.0" 4.0" 6.0"

12.70 19.05 25.40 38.10 50.80 63.50 76.20 101.60 152.40

38.10 38.10 38.10 38.10 38.10 38.10 44.50 50.80 63.50

øA

ØA ØB

14WHR

BPE-16AMP Solid End Cap

ØC

T øD

ød

DT-30

øD

14MPHR

ød

BPE-14MPHR . 14WHR Hose Adapter

øA

øD

øA

ØA ØB

ød

øD

BPE-Concentric & Eccentric Reducer Clamp / Weld End

SIZE

ØD

Ød

3/4"x1/2" 1.0"x1/2" 1.0"x3/4" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x1.5" 2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

19.05 25.4 25.4 38.1 38.1 38.1 50.8 50.8 50.8 50.8 63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6 101.6

12.7 12.7 19.05 12.7 19.05 25.4 12.7 19.05 25.4 38.1 38.1 50.8 38.1 50.8 63.5 38.1 50.8 63.5 76.2

76.2 88.9 76.2 114.3 101.6 101.6 165.1 152.4 152.4 101.6 152.4 107.9 203.2 158.8 108.0 308.0 263.5 212.7 161.9

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

DT-28/DT-29 SIZE

1.0"x1/2" 1.0"x3/4" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 2.0"x1/2" 2.0"x3/4" 2.0"x1.0" 2.0"x1.5" 2.5"x1/2" 2.5"x3/4" 2.5"x1.0" 2.5"x1.5" 2.5"x2.0"

ØD Ød

12.7 19.05 12.7 19.05 25.4 12.7 19.05 25.4 38.1 12.7 19.05 25.4 38.1 50.8

25.4 25.4 38.1 38.1 38.1 50.8 50.8 50.8 50.8 63.5 63.5 63.5 63.5 63.5

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

øB

DT-27

SIZE

DT-26

øB

L, L1, L2

DT-25

1.5"- 4.0"

øB

BPE-16W Weld Cap

BPE-14AMP-AWF Weld Ferrule 1/2" & 3/4" 1.0"

L, L1, L2

DT-24

øD T

BPE-Short Outlet Tee Clamp End

L, L1, L2

BPE-Short Outlet Run Tee

BPE-180º Clamp Joint

BPE Pipe Line (mm)

DT-28/DT-29

SIZE

ØD Ød

127 127 127 127 127.0 139.8 139.8 139.8 139.8 170 170 170 170 170

22.2 25.4 22.2 25.4 28.6 25.4 28.6 31.8 38.1 35 38.1 41.3 44.5 48.0

154 154 152.4 152.4 152.4 165.2 165.2 165.2 165.2 194 194 194 194 194

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

3.0"x1/2" 3.0"x3/4" 3.0"x1.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1/2" 4.0"x3/4" 4.0"x1.0" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

12.7 76.2 19.05 76.2 25.4 76.2 38.1 76.2 50.8 76.2 63.5 76.2 12.7 101.6 19.05 101.6 25.4 101.6 38.1 101.6 50.8 101.6 63.5 101.6 76.2 101.6

180 180 180 180 180 180 220 220 220 220 220 220 220

38.1 41.3 44.5 48 50.8 54 79.4 82.6 85.7 88.9 95.2 98.4 101.6

204 204 204 204 204 204 244 244 244 244 244 244 244

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65

DT-31 SIZE

ØA

1/2" 3/4" 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 25.4 50.5 50.5 64 77.5 91 119.0

4.75 4.75 6.35 6.35 6.35 6.35 6.35 7.92

SIZE

ØA

ØB

ØC

1/2"x1/2" 3/4"x3/4" 1.0"x1/2" 1.0"x3/4" 1.0"x1.0" 1.5"x1/2" 1.5"x3/4" 1.5"x1.0" 1.5"x1.5" 2.0"x1.5" 2.0"x2.0" 2.5"x2.5" 3.0"x3.0" 4.0"x4.0"

9.5 15.8 9.5 15.8 20.6 9.5 15.8 20.6 33.2 33.2 46 58.7 72 97.6

13.7 21.4 13.7 21.4 25.4 13.7 21.4 25.4 38.1 38.1 50.8 63.5 76.2 101.6

25 25 50.5 50.5 50.5 50.5 50.5 50.5 50.5 64 64 77.5 91 119

38 38 38 38 43 38 38 43 43 43 58.7 59.5 78.6 85.5

25.3 25.3 25.3 25.3 30.3 25.3 25.3 25.3 30.3 30.3 46 46.8 65.9 72.8

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Vacuum Components 45º Long Elbow

90º Short Elbow

Tee Flange

90º Long Elbow

45º Elbow Flange

90º Elbow Flange

4-Way Cross Flange

SIZE

ØD

38.1 57.2 76.2 95.25 114.3 152.4

1.65 1.65 1.65 1.65 1.65 2.1

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

52.4 74.6 103.2 131.8 160.3 211.1

1.65 1.65 1.65 1.65 1.65 2.1

L1 L

Cross

Welding Tee

T ØD

L L

SIZE

ØD

Ød

SIZE

ØD

Ød

SIZE

ØD

1.5"x1.0" 2.0"x1.5" 2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x1.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

38.1 50.8 63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6 101.6

25.4 38.1 38.1 50.8 38.1 50.8 63.5 38.1 50.8 63.5 76.2

50.8 50.8 101.6 50.8 152.4 101.6 50.8 254 203.2 152.4 101.6

1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1 2.1

1.5"x1.0" 2.0"x1.0" 2.0"x1.5" 2.5"x1.5" 2.5"x2.0" 3.0"x1.5" 3.0"x2.0" 3.0"x2.5" 4.0"x2.0" 4.0"x2.5" 4.0"x3.0"

38.1 50.8 50.8 63.5 63.5 76.2 76.2 76.2 101.6 101.6 101.6

25.4 25.4 38.1 38.1 50.8 38.1 50.8 63.5 50.8 63.5 76.2

114.3 152.4 152.4 152.4 152.4 165.1 165.1 165.1 196.8 196.8 196.8

53.98 60.3 63.5 69.85 82.55 76.2 88.90 82.55 101.6 95.25 95.25

1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.1 2.1 2.1

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

25.4 38.1 50.8 63.5 76.2 101.6

95.2 114.4 152.4 152.4 165.2 196.8

47.6 57.2 76.2 76.2 82.6 98.4

1.65 1.65 1.65 1.65 1.65 2.1

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

O.D

KF25 KF40 KF50

1.0" 100.09 50.03 1.5" 130.04 65.02 2.0" 139.95 70.1

Blank Flange

ØD

Blank Flange

ØD

Ød

ØD

Ød

SIZE

ØC

ØD

95.2 114.4 152.4 152.4 165.2 196.8

47.6 57.2 76.2 76.2 82.6 98.4

1.65 1.65 1.65 1.65 1.65 2.1

KF25 KF40 KF40 KF50 KF50 KF50

KF16 KF16 KF25 KF16 KF25 KF40

39.9 39.9 39.9 39.9 39.9 39.9

KF25 KF40 KF40 KF50 KF50 KF50

KF16 KF16 KF25 KF16 KF25 KF40

39.9 39.9 39.9 39.9 39.9 39.9

KF-10 KF-16 KF-25 KF-40 KF-50

12.2 17.3 26.2 41.1 52.3

30 30 40 55 75

5.1 5.1 5.1 5.1 5.1

Socket Weld Flange

Weld Flange

Tee

Straight Reducer

SIZE

ØD

ISO-Double Claw Clamp

ISO-Blank Flange ØC

ØA

Reducing Tee

25.4 38.1 50.8 63.5 76.2 101.6

ØB

Concentric Reducer

1.0" 50.03 1.5" 65.02 2.0" 70.1

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

ØC

O.D

KF25 KF40 KF50

SIZE

ØD

Ød

ØD

ød

SIZE

Cross

Reducing Tee

Conical Reducer

ØD

Concentric Reducer

1.0" 28.44 1.5" 42.67 2.0" 50.54

ØC

25.4 38.1 50.8 63.5 76.2 101.6

O.D

KF25 KF40 KF50

ØD

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

SIZE

Ød

1.65 1.65 1.65 1.65 1.65 2.1

1.0" 100.07 50.03 1.5" 130.04 65.02 2.0" 139.95 70.01

Tube

ØD

25.4 30.2 38.1 41.3 50.8 58.7 63.5 76.2 76.2 93.7 101.6 122.2

O.D

KF25 KF40 KF50

Ød

1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

SIZE

Tube

ØB

SIZE

90° Bend

Tube

ØD

1.65 1.65 1.65 1.65 1.65 2.1

Tube

ØA

90° Bend

ØD

ØC

ØD

45° Elbow

25.4 15.8 38.1 23.8 50.8 31.75 63.5 39.6 76.2 47.6 101.6 63.5

ØD

45° Elbow 1.0" 1.5" 2.0" 2.5" 3.0" 4.0"

L T

SIZE

45º Short Elbow

Vacuum Components

ØB ØD

L L, L1

Weld Flanges

Socket Weld Flange

SIZE

ØA ØB ØC ØD

KF-10 KF-16 KF-25 KF-40 KF-50

9.4 12.7 15.7 19.05 22.1 25.4 33.8 38.1 46.5 50.8

12.2 17.3 26.2 41.1 52.3

30 30 40 55 75

SIZE ØA ØB ØC ØD

12.7 12.7 12.7 19.1 19.1

40 40 40 40 40

KF-10 KF-16 KF-25 KF-40 KF-50

9.4 15.7 22.1 34.8 47.5

13.0 19.3 25.7 38.4 51.1

12.2 17.3 26.2 41.1 52.3

30.0 30.0 40.0 55.0 75.0

Double Claw Clamp

Blank Flange

SIZE

12.7 12.7 12.7 12.7 12.7

ISO-63 ISO-80 ISO-100 ISO-160

M8 M8 M8 M10

24.1 24.1 24.1 27.9

50.3 50.3 50.3 52.1

ISO-63 ISO-80 ISO-100 ISO-160

ØB ØC ØD L

70 83 102 153

90 105 125 175

95 110 130 180

12 12 12 12

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Vacuum Components KF-Clamp-Aluminum

ØA

ØB

ØC

ØB

11.17 12.95 17.27 19.3 22.6 25.9 35.3 38.6 48 51.3

Weld Flange

ØC

ØD

12.2 17.3 26.2 41.1 52.3

30 30 40 55 75

SIZE

ØA

5 5 5 5 5

ISO-63 ISO-80 ISO-100 ISO-160

63.7 76.4 101.8 152.9

ØB

ØC

ØD

SIZE

ØA

ØB

70 90 95 83 105 110 102 125 130 153 175 180

12 12 12 12

10/16 20/25 32/40 50

35 45 60 80

45 55 70 96

62 73 86.1 123

ØA

Clamp For Metal Seal (SS304 Stainless Steel) KF SIZE

ØA

ØB

ISO-KF NW10/16 ISO-KF NW20/25 ISO-KF NW32/40 ISO-KF NW50

47 57.2 72.4 96

35.1 45.2 59.9 80

Chain Clamp (Alu,Plastic& SS304 material Link Steel)

Quick Release Clamp KF-Type (Alu&SS304) SIZE

ØB

SIZE

ØA

ØB

ISO-KF NW10/16 ISO-KF NW20/25 ISO-KF NW32/40

76.2 76.2 101.6

50.8 50.8 76.2

ISO-KF NW10/16 ISO-KF NW20/25 ISO-KF NW32/40 ISO-KF NW50

115.1 1.9 34.1 151.9

59.9 52.1 5.1 104.9

ØA ØB ØE

66.8 79.75 98.8 149.86 207.8 257.5 312 394 494

69.6 8 82.6 8 101.6 8 152.6 8 212.6 8 260.4 8 317.3 12 399.2 12 500.2 12

ØE

3.81 3.81 3.81 3.81 3.81 3.81 5.58 5.58 5.58

91 104 123 170 234 285 340 416 555

Clamping Element 3Pcs KF-TYPE (Alu or SS304) SIZE

ØA

ISO-KF NW10/16 ISO-KF NW20/25 ISO-KF NW32/40 ISO-KF NW50

52.1 55.1 70.1 95.3

18 16 18 24.9

NW FLEXIBLE HOSES SIZE

ØA

KF-16-250 KF-16-500 KF-16-750 KF-16-1000 KF-25-250 KF-25-500 KF-25-750 KF-25-1000

30 30 30 30 40 40 40 40

250 500 750 1000 250 500 750 1000

SIZE

KF-40-250 KF-40-500 KF-40-750 KF-40-1000 KF-50-250 KF-50-500 KF-50-750 KF-50-1000

ØA

55 55 55 55 75 75 75 75

250 500 750 1000 250 500 750 1000

ØA

D C

ØA

ISO-63-V-U ISO-80-V-U ISO-100-V-U ISO-160-V-U ISO-200-V-U ISO-250-V-U ISO-320-V-U ISO-400-V-U ISO-500-V-U

ØA ØB

ØA

ISO-Type SIZE

ØA

KF-10 KF-16 KF-25 KF-40 KF-50

ØA

ØD

ØD SIZE

ØA

ØB

ØA

ØC

ØB

Centreing Ring (SS304 & Alu Material) with O-Ring (EPDM, Silicon) Ø

ISO-Bored Flange

ØB

Bored Flange

Vacuum Components

ØA

ØB

KF-Type SIZE ØA ØB C

10 16 25 40 50

3.9 3.9 3.9 3.9 3.9

KF-10 KF-16 KF-25 KF-40 KF-50

12 17 26 41 52

8 8 8 8 8

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Press Type Clamp Ring KF-TYPE (Alu or SS304) SIZE

ØA

ISO-KF NW10/16 ISO-KF NW20/25 ISO-KF NW32/40 ISO-KF NW50

36.1 46 61 82

47 57.2 71.1 90.9

ISO FLEXIBLE HOSES SIZE

ISO-63-250 ISO-63-500 ISO-63-750 ISO-63-1000 ISO-80-250 ISO-80-500

ØA

SIZE

ØA

95 95 95 95 110 110

250 500 750 1000 250 500

ISO-80-750 ISO-80-1000 ISO-100-250 ISO-100-500 ISO-100-750 ISO-100-1000

110 110 130 130 130 130

750 1000 250 500 750 1000

8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

HTM VALVES

Taiwan Head Office 8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.

Catalog BV-2014 Printed in Taiwan