INSTALLATION GUIDE
Quality Electric Underfloor Heating
Measure the available floor space excluding any fitted cupboards, sanitary ware, mat wells etc, and allow a 100mm border around the edge of the room Apply primer if specified by the tile adhesive manufacturer’s guidelines See page 6 for details on floor preparation, Thermostat and floor sensor installation. Refer to specific Thermostat installation instructions. Work out the cable spacing using the calculation below: Available floor space (m2) x 100 Cable kit length (m)
= Spacing (cm) Optimum spacing for 150w/m2 is 7cm Minimum spacing: 50mm
Your calculations:
www.comfortzone.co
info@comfortzone.co
E&OE
5
