NEWS
HOW MINES CAN CREATE WITH FIRE SUPPRESSION South Africa has a commendable record for mining safety. Mining accidents cost the lives of 11 000 workers between 1984 and 2005. Yet significant efforts have been made to change that rate, and, in 2019, the number fell to 51. Even though that is still 51 deaths too many, it demonstrates that the Mining sector and Department of Mineral Resources & Energy have the right priorities. South African mines can now close in on zero safety incidents, explains Chetan Mistry, marketing and strategy manager for Xylem Africa: “A lot of good mining safety comes down to individual and shared responsibility, coupled with technologies that create a safer environment. If mining operations can justify the cost requirements of an effective safety system, instead of a minimally viable option, we can create mines that are safe for all workers, using technology to automate safety responses and reinforce safety habits across mining sites, above and underground.”
10
The key to justifying the costs of fire suppression systems is by amplifying the value of this investment. Modern fire suppression and ventilation systems, used in Xylem’s safety solutions, can double as both improving safety measures and supporting resilient business operations. Every incident on a mine can shut down operations. The right systems provide both early detection of problems and quick interventions to prevent and contain incidents of fire and fumes. If a safety system can’t be available, temporary pumps and suppression systems can keep workers safe and the site running. “Detection is better than cure, especially in mines where you have a tinderbox of different flammable materials. It’s not just about fire suppression. Fumes from a fire are more likely to overwhelm miners than the flames are. If you can detect these early and respond to them automatically, you cause much less business disruption,” says Mistry.
INDUSTRIAL BUYER JULY/AUGUST 2021
Mining companies can gain a lot more value from fire suppression and ventilation systems if they consider a few key concerns: • Routinely exercise the pumps, ensuring they operate as required. Maintain a regular testing schedule and don’t only rely on vendor inspections. • Efficient ventilation is crucial, especially for detecting vapours before they become a problem. Understanding air velocity will help operators stay ahead of any fire, and ventilation-on-demand systems can direct air where needed, thus not wasting power and ventilation on unoccupied parts of the mine. • Understand the volume of water required by the system, based on the likely fire environment it has to suppress. A single sprinkler can easily use 50 litres of water in a minute. Consider what is required to meet any fire risks and also keep in mind the impact of flooding. • Canisters and piping containing suppression agents can be monitored in real-time to report on their status and levels. This can cut down substantially on the costs of inspections. • Likewise, it’s very important to know the state of pressure in the fire suppression system. Pressure should always be maintained in case of a fire event. Low pressure can result from undiscovered leaks. Too much pressure is not good either, as the system could go off randomly or be damaged when discharging water. Use sensing and controller equipment to monitor and maintain steady pressure. • Locate Fire pumps rooms for easy access during fire demand situations. Though it may be tempting to incorporate a pump room into the facility as much as possible, consider how a fire could impede access to it, then look at a new location or measures to keep access available
