Waiver and Release Statement

MATERIALS AND TOOLS NEEDED FOR BROW SHAPING AND BROW TINTING/DYEING

Always ensure that you are thoroughly set up for the procedure before your client arrives. Your client should walk in to a neat, clean, and well-organized treatment room.

Cream developer, dye/tint (color of choice), Low temperature soft wax, pre-cut wax strips, Miscellar water/Tint remover, 4x4 gauze, 10 browbaton applicators, slanted tweezer, pointer tweezer, brow scissors, hybrid tint brush, brow pencils (shade of choice), eyebrow highlighters (shade of choice), highlighter brush, brow gel, eyebrow spool and hydrating eye mask.

THE EYEBROW HARMONY SHAPING METHOD (BROW MAPPING)

The Eyebrow Harmony Shaping Method is the process that helps you achieve balance, symmetry, harmony and guides you in shaping eyebrows evenly. As mentioned earlier in the introduction, eyebrows are the most important feature on your face. They give you your own frame of symmetry and symmetry translates to beauty through the human eye. It is always essential to use this method on each client to see their own frame of symmetry. This method specifically tailors to each client’s eyebrows based on their bone structure and their natural brow placement. Applying this method eliminates significant errors when discovering the correct eyebrow shape for the client.

So, when we think about eyebrow shaping, we should consider that no one’s eyebrows are the same. Also, do not think of your client’s brows as twins but as sisters. However, it is your job to make your client’s eyebrows as symmetrical as possible.

So, how does eyebrow harmony shaping methodwork?

In eyebrow harmony shaping method, you mark specific points on your client’s eyebrows; i.e where your client’s eyebrows should start, where the arch should be, and where the eyebrow should end.

Applying The Eyebrow Harmony Shaping Method

The aim is to find where the eyebrow should begin, where the arch should be placed, and where the eyebrow should end. Next, ask your client to look downwards for you to identify the natural contours of the eyes.

1 4

2

3 The Brow Harmony Shaping System!

STEP 1: Brow Start Using your Just Everything pencil, rest your pencil above the middle of your nose, mark your first note. This is where your brow begins.

STEP 2: Arch Then, angle the pencil across the eye and through the pupil, mark your note, this is your arch placement.

STEP 3: Brow End Angle the pencil across the corner of your eye, mark your note, this is where your brow ends.

STEP 4: Brow Shaping Draw a line connecting the note where your brow should start, then connecting to the note at the arch and finally connecting the arch to the note where your brow should end. Now, that you’ve connected your notes, you now have BROW HARMONY!

Anything outside these lines will need to be waxed so that you remain with a sharp natural shape. You can use waxing products of your choice.

We mostly use soft wax, but if your client has sensitive skin, you can go for hard wax.

WAXING

Personally, I prefer waxing. Why? Well, waxing lasts around 4 to 6 weeks. However, many will argue that the timeline may change because hair grows differently for everyone; regardless, I still prefer waxing. I also think waxing is better because it gives the eyebrows some rich edge, and since many of my clients want strong-shaped brows, waxing gives me just that!

STEP 1: Take your browbaton, dip it in the soft wax, and apply your wax on the top of one end of the eyebrow. Start from where the brow begins going in the direction toward the arch.

STEP 2: Apply your strip, press firmly and remove the strip going against the direction of hair growth. STEP 3: Take a clean browbaton, dip it into the soft wax and apply your wax from the arch to where the brow ends.

STEP 4: Move to the other eyebrow and REPEAT the same steps!

Please note that you should never wax over the same area twice when using soft wax. The skin potentially will lift. If your client has sensitive skin, use hard wax. STEP 5: Work on the browline. Start from the beginning of the brow heading to the arch. Remember to get another brow baton for this step.

STEP 6: As we did with the other eyebrow, apply your strip, press firmly and remove the strip against the direction of hair growth.

STEP 7: Next, take another brow baton and apply wax from the arch to where the brow ends. STEP 8: Apply your strip, press firmly and remove the strip against the direction of hair growth.

STEP 9: Finally, wax the center of the brow and remove with your wax strip.

STEP 10: Brush your brows. How is your work so far?