UNIVERSAL MACHINING CENTER VERTICAL MACHINING CENTER
COMBI COMBI-U11 COMBI-U10 COMBI-V10 COMBI-U6
1
Kiheung Philosophy KIHEUNG ENDEAVOURS TO OFFER THE ULTIMATE TO CUSTOMERS THROUGHOUT THE WORLD Since founded in 1968, KIHEUNG has become one of the most advanced and leading machine tool manufacturers with an effort to supply high quality product to customers. KIHEUNG specialized in CNC bed type milling machine, Travelling column boring and milling center, Double column machining center, Simultaneous five axis machining center, Double column 5 axis and vertical turning machine, is determined to enhance the quality by respecting the customer's requirements with the philosophy of " FULL SATISFACTION TO THE CUSTOMER AND ENDLESS SERVICE TO THE CUSTOMER" Through the spirit of mutual co-operation, KIHEUNG is able to ensure the continuous distribution with high quality machine tools designed to satisfy customer's requirements all over the world. Thanking and trusting in your continuous support.
2
KIHEUNG DESIGNED UNIVERSAL HEAD The higher productivity can be reached with KIHEUNG’s UNIVERSAL HEAD, which is popular all over the world. Any desired angle milling work can be performed by swiveling the head, which reduces the setting time remarkably. KIHEUNG COMBI-U series with UNIVERSAL HEAD and ATC can enhance the productivity, because it can be used for vertical, horizontal and 90° work with one machine.
3
BED TYPE UNIVERSAL MACHINING CENTER
COMBI- U11 TABLE SIZE
2660 3140/3600 1100mm
TRAVEL (X-AXIS)
2300/2800/3200mm
(Y-AXIS)
1400mm
(Z-AXIS)
1200mm
SPINDLE FANUC, HEIDENHAIN
4
2000rpm
Fanuc 0i NC Unit
Fanuc 0i-M adopted as standard for COMBI-U series.
Fanuc 0i NC Unit
Ballscrew
High-precision preloaded double nut ball screw guarantees the accuracy and smooth movement of the axis travel
Ballscrew
Telescopic Chipcover
Telescopic chip cover protects the ground slide way
Telescopic Chipcover
Linear Scale
Linear scale for X,Y,Z axis, which is attached as standard, guarantees positioning accuracy and repeatability accuracy for a long time. Every machine is inspected with laser for backlash and pitch error compensation, meanwhile QC 10 ball bar test for the roundness and geometric accuracy.
Linear Scale
5
BED TYPE UNIVERSAL MACHINING CENTER
COMBI- U11 OPTIONAL PROTECTION COVER
Protection cover prevents chips and coolant water from scattering on the floor.
CHIP CONVEYOR
SPINDLE ORIENTATION (RIGID TAPPING)
HEAD COOLING
6
Lift up chip conveyor.
24 TOOL ATC
OPTIONAL
24 tools vertical ATC with twin arm gripper is driven by geared motor with cam and cam follower.
A2-HEAD A2-head, which enables automatic vertical / horizontal positioning, enhances the productivity for the vertical and horizontal work.
7
BED TYPE UNIVERSAL MACHINING CENTER
COMBI- U11 DESCRIPTION
UNIT mm
Table size (length width) T-slots (number width) TABLE
TRAVEL
FEED
SPINDLE
MOTOR
No
COMBI-U11
M-HEAD
A2-HEAD
2660 / 3140 / 3600 1100
mm
8
22
mm
125
Max. permissible load
Kg
4000
Longitudinal travel
mm
2300 / 2800 / 3200
Cross travel
mm
1400
Height from table to vertical spindle nose
mm
-15~1185(1200) -85~1115(1200)
Height from table to horizontal spindle nose
mm
-5~1195(1200)
Distance between T-slots
0~1200(1200)
Axes feedrate
mm/min
5000
Rapid feedrate
mm/min
10000
Taper (7/24)
ISO
50
Speed (High-low 2steps)
rpm
1~2000
1~2000
Distance from column to vertical spindle center
mm
1180
1180
Distance from column to horizontal spindle center
mm
1200
1275
Spindle drive motor
Kw
18.5 / 22
Feed drive motor
Nm
X : 30, Y : 40, Z : 22
Coolant pump motor
Kw
0.25
Chip screw motor
Kw
0.4
Lubrication motor
Kw
0.1
Hydraulic clamping motor
Kw
0.75
Oil cooler
Kw
1.5
Approx. machine net weight
kg
21500/ 24000/ 26000
Floor space ( length width height)
mm
6600/8440/B900 5060 4180
The contents of the catalogue are subject to change without prior notice.
STANDARD
8
OPTIONAL
• Fanuc 0i / Heidenhain TNC320
• Oil cooler
• 24 ATC
• 3 axis Linear Scale
• Flood coolant system with tank and pump
• A2-Head
• Hardened and ground slideway for 3
• Telescopic chip cover for X, Y axis
• Fanuc 31i / Heidenhain iTNC530
• Chip screw in the rear of the bed
• Spindle orientation for rigid tapping
• Electronic handwheel
• Lift up chip conveyor
axis(Longitudinal, cross and vertical) • Cross slideway
• Air blow
• Preparation of the continuous 4th axis
- X travel 2300mm : 4 slideway
• Automatic power off with M function
• Protection cover
- X travel 2800 / 3200mm : 6 slideway
• RS232C interface
• Splash guard on the table
DIMENSION
CROSS TRAVEL A2-HEAD CROSS TRAVEL
M-HEAD CROSS TRAVEL
❋ The contents of the catalogue are subject to change without prior notice.
SPINDLE MOTOR
9
• SPINDLE MOTOR : FANUC MOTOR 18i (18.5kw/22kw)
BED TYPE CNC UNIVERSAL MILLING MACHINE
COMBI- U10 TABLE SIZE
2660 3140/3600 1100mm
TRAVEL (X-AXIS)
2300/2800/3200mm
(Y-AXIS)
1050mm
(Z-AXIS)
850mm
SPINDLE FANUC, HEIDENHAIN
10
2000rpm
SPINDLE MOTOR
• SPINDLE MOTOR : FANUC MOTOR 18i (18.5kw/22kw)
OPTIONAL SPINDLE ORIENTATION (RIGID TAPPING)
HEAD COOLING
11
BED TYPE CNC UNIVERSAL MILLING MACHINE
COMBI- U10 DESCRIPTION
UNIT
COMBI-U10
mm
2660 / 3140 / 3600 1100
Table size (length width) T-slots (number width) TABLE
TRAVEL
FEED
SPINDLE
MOTOR
No
mm
8
22
mm
125
Max. permissible load
Kg
4000
Longitudinal travel
mm
2300 / 2800 / 3200
Cross travel
mm
1050
Height from table to vertical spindle nose
mm
50~900
Height from table to horizontal spindle nose
mm
60~910
Axes feedrate
mm/min
5000
Rapid feedrate
mm/min
10000
Taper (7/24)
ISO
50
Speed (Low-High 2steps)
rpm
2000(1-540, 541-2000)
Distance from column to vertical spindle center
mm
1000
Distance from column to horizontal spindle center
mm
1010
Spindle drive motor
Kw
18.5 / 22
Feed drive motor
Nm
X:30 Y:40 Z:22
Coolant pump motor
Kw
0.25
Chip screw motor
Kw
0.4
Lubrication motor
Kw
0.1
Hydraulic clamping motor
Kw
1.1
Oil cooler motor
Kw
2.25
Approx. machine net weight
kg
18500 / 21000 / 23000
Floor space (length width height)
mm
6660/8440/9440 4655 3800
Distance between T-slots
The contents of the catalogue are subject to change without prior notice.
STANDARD • Fanuc 0i / Heidenhain TNC320
• Oil cooler
• Fanuc 31i / Heidenhain iTNC530
• 3 axis Linear Scale
• Flood coolant system with tank and pump
• Spindle orientation for rigid tapping
• Hardened and ground slideway for 3
• Telescopic chip cover for X, Y axis
• Lift up chip conveyor
• Chip screw in the rear of the bed
• Preparation of the continuous 4th axis
axis(Longitudinal, cross and vertical)
12
OPTIONAL
• Cross slideway
• Electronic handwheel • Air blow
- X travel 2300mm : 4 slideway
• Automatic power off with M function
- X travel 2800 / 3200mm : 6 slideway
• RS232C interface
DIMENSION
CROSS TRAVEL
â?‹ The contents of the catalogue are subject to change without prior notice.
13
BED TYPE CNC UNIVERSAL MILLING MACHINE
COMBI- U 6 TABLE SIZE
2200 600mm
TRAVEL (X-AXIS)
1600mm
(Y-AXIS)
750mm
(Z-AXIS)
700mm
FANUC, HEIDENHAIN
14
COMBI-U6 is designed as economic CNC machine with 12 step manual gear change for spindle and 3 axis movement with CNC
DESCRIPTION
UNIT
COMBI-U6
mm
2200 600
T-slots (Number Width)
No mm
5 20
Distance between T-slots
mm
80
Max. permissible load
Kg
2000
Longitudinal travel
mm
1600
Cross travel
mm
750
Height from table to vertical spindle nose
mm
50~750
Working surface (Length Width) TABLE
TRAVEL
mm
60~760
Axes Feedrate
mm/min
4000
Rapid feed
mm/min
8000
Taper
ISO
50
No. of spindle speeds
No.
12
Speed
r.p.m
40~1600
Distance from column to vertical spindle center
mm
700
Distance from column to horizontal spindle nose
mm
710
Spindle drive motor
Kw
11
Feed drive motor
Nm
12
Coolant pump motor
Kw
0.1
Lubrication pump motor
Kw
0.1
Hydraulic clamping motor
Kw
0.75
T-Rotor pump motor
Kw
0.1
Approx. machine net weight
Kg
7500
Floor space(width length height)
mm
4760 x 3450 x 3050
Packing size(width length height)
mm
2300 2800 2800
Height from table to horizontal spindle center FEED
SPINDLE
MOTOR
The contents of the catalogue are subject to change without prior notice.
DIMENSION
15
â?‹ The contents of the catalogue are subject to change without prior notice.
VERTICAL MACHINING CENTER
COMBI- V10 TABLE SIZE
2660 3140/3600 1100mm
TRAVEL (X-AXIS)
2300/2800/3200 mm
(Y-AXIS)
1050mm
(Z-AXIS)
1100mm
TOOL MAGAZINE CAPACITY 40EA SPINDLE FANUC, HEIDENHAIN
16
6000rpm
SPINDLE MOTOR
• POWER GRAPH(KW) 4 : 1 [ZF4:1] • SPINDLE MOTOR : a22 7000i(FANUC)
ZF GEAR BOX
AUTOMATIC TOOL CHANGER
17
VERTICAL MACHINING CENTER
COMBI- V10 DESCRIPTION
UNIT
COMBI-V10
mm
2660 / 3140 / 3600 1100
Table size (length width) T-slots (number width) TABLE
TRAVEL
FEED
SPINDLE
MOTOR
A.T.C
No
mm
8
22
Distance between T-slots
mm
125
Max. permissible load
Kg
4000
Longitudinal travel
mm
2300 / 2800 / 3200
Cross travel
mm
1050
Height from table to vertical spindle nose
mm
100~950/100~1200
Axes feedrate
mm/min
5000
Rapid feedrate
mm/min
12000
Taper (7/24)
ISO
BT 50
Speed (Low-High 2steps)
rpm
6000(1-1500, 1501-6000)
Distance from column to vertical spindle center
mm
1000
Spindle drive motor
Kw
20 / 26
Feed drive motor
Nm
X : 22, Y : 40, Z : 30 / X : 30
Coolant pump motor
Kw
2.6
Chip screw motor
Kw
0.4
Lubrication motor
Kw
0.1
Hydraulic motor
Kw
0.75
Oil cooler motor
Kw
2.4
Tool magazine capacity
ea
40
Max. tool dia.
mm
230
Max. tool length
mm
350
Max. tool weight
kg
20
Tool change time
sec
8
Approx. machine net weight
kg
21000/23500/25500
Floor space (length width height)
mm
6600/8440/8900 x 4700 x 4070
The contents of the catalogue are subject to change without prior notice.
STANDARD • Fanuc 31i / Heidenhain iTNC530 • 40 tools vertical tool changer • ZF gear box • Spindle orientation for rigid tapping
18
• 3 axis Linear Scale • Hardened and ground slideway for 3 axis(Longitudinal, cross and vertical) • 6 Cross slideway • Protection cover
• Oil cooler • Flood coolant system with tank and pump • Telescopic chip cover for X, Y axis • Chip screw in the rear of the bed • Electronic handwheel • Air blow • Automatic power off with M function • RS232C interface • Splash guard on the table
OPTIONAL • Coolant through spindle • Lift up chip conveyor • Preparation of the continuous 4th axis
DIMENSION
WORKING VOLUME
â?‹ The contents of the catalogue are subject to change without prior notice.
Cat No. 03.2010
KIHEUNG MACHINERY CO. LTD
43-1 moon pyung-dong, dae deog-gu, Daejeon, Korea
20 Kérdéseivel keressen fel minket bátran: ORIGO CNC KFT. Iroda. 2045. Törökbálint, Tó Park u. 3. (Forwarders Plaza) E-mail: info@origocnc.hu Tel.:+36-23-920-836 www.origocnc.hu