Ozbike - Issue #393

The voice of the

australian biker

393

$5

’59 TRIUMPH THUNDERBIRD BOBBER

Mexican Style Heritage

W inter l Specia

Eddie Munster Tribute Chopper 93 >

Slaya Chop

0 744707 547139 $5 inc. GST

’59 TRIUMPH THUNDERB Cameron decided to have this bike built as a memorial to his grandparents…

Oz Biker 6

Photos by Rod Cole Story by Justin (PopBang Classics)

BIRD BOBBER

W

HEN IT CAME time to start on Cameron’s bike, he delivered me at PopBang Classics the 1959 Triumph Thunderbird engine, gearbox, original frame, and a mountain of boxes full of everything I needed to assemble the bike. Pretty much all of the original parts got scrapped as they were too far gone. Out of the complete engine, I only used the cases and the gearbox, which was surprisingly good.

Cam sourced a Factory Metal Works frame and a Factory Metal Works frontend to start the build off.

The guards are aftermarket blanks that I modified and profiled. I custom made the struts for the rear guard.

The tank is an aftermarket Sportster style. I shallowed the tunnel to get the tank sitting up level with the backbone and repositioned a new filler cap and neck that I made up on the lathe. I then put the two taps at the base to get maximum use of the tank.

Every single nut and bolt on the bike is stainless steel.

The front wheel is off a Yamaha vintage dirt bike, not sure exactly what model.

The rear wheel is a custom 16 x 3 inch wheel. I turned up the polished spacers for the front and rear wheels on the lathe as well. I went with Avon Speed Master tyres, 21 for the front and 16 x 5 for the rear.

The pipes are an aftermarket Triumph option. I had to modify them to fit the frame then made them into slash-cuts.

They have baffles fitted inside the pipes and have been heat-proof powdercoated and wrapped with standard heat wrap.

I modified the original rear brake and gear levers to take some brass pegs I made on the lathe to match the foot pegs that came with the frame.

I fabricated the small electrical box that the key barrel sits in. It’s a full batteryless electrical system, the bike runs a Podtronic regulator rectifier powered by a Wassell high output stator with a capacitor for good luck. This setup supplies more than enough power to run the headlight and taillight and give the plugs the spark they need. I kept the bike tidy from wiring looms by running all of the wiring internally.

When I pulled down the engine it had obviously been butchered by someone who had no idea what they were doing and was pieced back together to get rid of. It had new barrels with knackered pistons put back in. The rings were rusted to the barrels so the barrels were shot now as well. One of the valves was

Slaya bike ED to buy a USA DECID and om the USA in kit form fr e; and here at hom assemble it et Bike was a Bourg se o ch e h hing the the bike n after watc o th y P ) W B ich the Works (B ables in wh d n e p x E e h ylvester movie T ing role as S rr a st a d a h Python hip.

Stallone’s w els in the several mod re a There nge and all es Works ra made Bourget Bik are custom ts n e n o p m of the co e BBW in-house. mprises of th co a y la S ’s -seat Musa -frame, drop n -i il o t n te a and BBW rigid, p egree rake; d 7 4 h it w shock; chassis d with billet n e tn o fr r e downspring one, six-inch -b ck a b ch n nd and seven-i radius arse-e 0 3 3 ; h tc re tube st . be S&S front air dam nt is a 113 cu la p r e w o p The haust. It’s orty style ex with BBW sh x-speed ith a Baker si threealso fitted w te mo Bru IV ri P , n o si is transm

M

Words & pics by Chris Nilsson

Musa is one of those characters bigger than life, so it was no surprise when he told me he was building a bike that would blow me away, and true to his word, the Slaya was born.

Oz Biker 21

Mexican Style Heritage

Nathan had wanted a Mexican LA-style bike for ages, so when his mate bought a Heritage softaIl, he could see the possibilities‌

M

Words by Nathan Bilsborough Photos by Rod Cole

Y BUSINESS is Livin Loco Garage. We build bikes from scratch, from start to finish; we do full fabrication, paint work, insurance work, normal paint jobs, complete rebuilds.

My business partner is Luke. He does all the metal fabrication at the shop, and he did all the tin work on my bike. Ha has always been doing metal fabrication, but he got to that point where he was sick of working for everyone else, making everyone else’s name big, so we thought we might as well make our own name, try something for ourselves.

I‘ve been doing airbrushing since I was 14-years-old. I do all the paint work at the shop: airbrushing, pinstriping, gold leaf stuff, metal flakes and candies.

This bike started off as a Heritage Softail. I bought it off one of my mates.

It’s the kind of bike I wanted for ages, and I just bugged him for months and months until he ended up selling it to me. I pulled the whole thing apart straight away and started rebuilding it.

It’s an Ultima frame and it’s obviously got every bit of chrome on it you could think of.

The tanks were cut out, and I took the right-hand-side and put it to the lefthand-side, so it becomes concave. We had the tanks in primer ready to paint when a mate put the badges there as Oz Biker 49